CO2 Laser Power supply for RECI 80W 90W, Peak 100W CO2 Laser Tube W2 S2 HY-DY13

CO2 Laser Power supply for RECI 80W 90W, Peak 100W CO2 Laser Tube W2 S2 HY-DY13 HY-DY13 CO2 laser engraving and cutting machine power supply 110V compatible with RECI Z4 / W4 / S4 100-120w laser tube, also suitable for EFR, YONGLI, WEEGAINT, SP and other lasers. Product parameters: Input voltage: AC110V AC frequency: 47-440Hz Maximum input power: 550W Maximum input current: 8A Maximum output voltage: 40KV Maximum output current: 28mA Efficiency: greater than 90% Mean time between failures: greater than 10,000 hours Response speed: less than 1mS (from the time the switching signal is given until the output current rises to 90% of the set current) Withstand voltage: input-output, input-case: AC1500V 10mA 60S; output negative is connected to the case.

CO2 Laser Power supply for RECI 80W 90W, Peak 100W CO2 Laser Tube W2 S2 HY-DY13

CO2 Laser Power supply for RECI 80W 90W, Peak 100W CO2 Laser Tube W2 S2 HY-DY13

HY-DY13 CO2 laser engraving and cutting machine power supply 110V compatible with RECI Z4 / W4 / S4 100-120w laser tube, also suitable for EFR, YONGLI, WEEGAINT, SP and other lasers. Product parameters: Input voltage: AC110V AC frequency: 47-440Hz Maximum input power: 550W Maximum input current: 8A Maximum output voltage: 40KV Maximum output current: 28mA Efficiency: greater than 90% Mean time between failures: greater than 10,000 hours Response speed: less than 1mS (from the time the switching signal is given until the output current rises to 90% of the set current) Withstand voltage: input-output, input-case: AC1500V 10mA 60S; output negative is connected to the case. Control interface: TTL electric evaluation switch control, effective level can be high or low selection Operating environment: working temperature (-10-40) degrees Celsius, humidity: less than 90% Cooling form: forced air cooling Features: The power supply itself can be equipped with a feedback interface that can be used for closed-loop control as well as for verifying the actual operating current of the laser. ⊙ Simple control and high reliability: high and low level control laser start and stop; at the same time, the protection switch detects water flow. ⊙Laser power control is simple: both the analog signal 0-5V can be used to control the laser power, or it can be controlled by digital signals. ⊙The power supply itself has an open circuit protection function: it is safer to use and significantly extends the life of the power supply. ⊙ Cutting and engraving compatible: Power stable, adaptable and fast response, suitable for cutting or engraving. ⊙The power supply has a manual test button to quickly determine the fault on site. The package contains: 1* power supply PaymentDelivery detailsTerms of salesAbout usContact usPayment   We accept ebay payment 。 Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility. Delivery details Shipping:   2-9 working days to: USA   Terms of sales

•  
• We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!

 

•  

About us Your satis faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects. a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package. b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item. c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid. Thank you. Contact us Business Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time) Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday. Please contact us with ebay message. Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time) Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday. Please contact us with ebay message. Please feel free to contact us if you have any questions.

Shipping notice	Can not ship to Puerto Rico/Alaska/Hawaii
Brand	Unbranded
MPN	Does Not Apply
Custom Bundle	Yes
Input voltage	AC110V
AC frequency	47-440Hz
Maximum input power	550W
Maximum input current	8A
Maximum output voltage	40KV
Maximum output current	28mA
Efficiency	greater than 90%
Mean time between failures	greater than 10,000 hours
Response speed	less than 1mS
Cooling form	forced air cooling
Operating environment	working temperature (-10-40) degrees Celsius
humidit	less than 90%

• Condition: New
• Shipping notice: Can not ship to Puerto Rico/Alaska/Hawaii
• Brand: Unbranded
• Custom Bundle: Yes
• Input voltage: AC110V
• AC frequency: 47-440Hz
• Maximum input power: 550W
• Maximum input current: 8A
• Maximum output voltage: 40KV
• Maximum output current: 28mA
• Efficiency: greater than 90%
• Mean time between failures: greater than 10,000 hours
• Response speed: less than 1mS
• Cooling form: forced air cooling
• Operating environment: working temperature (-10-40) degrees Celsius
• humidit: less than 90%

See More