CNC Kit 4 AxisTB6560 NEMA 23 Stepper Motor Driver + Software Mach3

Descriptions

Hi, you are bidding a GREAT VALUE 4 AIXS CNC PC CONTROL COMPLETE KIT !

Package includes:

• 1 x New 4 Axis TB6560 Driver Controller Board 1/16Microstep, 12-36V, 3A
• 4 x New NEMA 23 1.8Degree Single-Shaft Stepper Motors 1.2Nm/175oz-in 2.8A

 

Product Features:

• Toshiba TB6560AHQ chip - High power, maximum 3.5A drive current chipset !
   
• 1-1/16 microstep setting - Higher accuracy and smoother operation than standard 1, 1/2 step!
• Adjustable 1.5A-3A drive current settings for each axis - 25%,50%,75%,100% of full current can be set for different stepper motors
• Overload, over-current and over-temperature safety - Full protection for your computer and peripheral equipment !
• On board current switching - Power output can be set according to specific user requirement !
• Full closed-type optical isolation to protect the user's computer and equipment
• Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output!)
• 4 channel inputs interface- Can be used for XYZ limit and emergency stop !
• Professional design - Two stage signal processing with super anti-jamming !
• Bipolar constant current chopper drive with non-resonant region - Controls motors smoothly through range without creep effect !
• Four control inputs (divided into pairs of knives) - Allows setting of limit and emergency stop !
• Universal architecture - Supports most parallel software MACH3,KCAM4 etc!
  *For compatibility with other softwares, please feel free to contact us!

  Dip settings:

Current Setting	1	2	Decay Mode Settings	3	4	MicroStep Settings	5	6
100%	ON	ON	FAST	ON	ON	1	ON	ON
75%	ON	OFF	25%	ON	OFF	1/2	ON	OFF
50%	OFF	ON	50%	OFF	ON	1/8	OFF	ON
25%	OFF	OFF	SLOW	OFF	OFF	1/16	OFF	OFF

 Further Details:

• Power supply DC 12-36V (not included, please feel free to contact us if you need !)
  *This driver get its power from the same unit as the steppers, it doesn't require a separate power source.
  *Voltage Selection:
  12-16V DC power supply for Nema 17 stepper motors
  16-24V DC power supply for Nema 23 stepper motors
  24-36V DC power supply for Nema 34 stepper motors
  (High voltage will burn up the chips or stepper motors!!!)
  *Ampertage Selection:
  Output current of the power supply can be calculated by the following expressions:
  Output current = Rated current of your stepper motors * quantity + 2A
  (For example, if you want to drive 3 * 3A Nema 23 stepper motors, theoretically 24V 11A DC power supply is recommended, but higher power such as 24V 15A also will be good.
  If you are not sure about the selection of power supply, please feel free to contact us for help)
• The power output of 12V shall be applied to the radiator fan of 12V
• Driver output compatible with 2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.
• Suitable for unipolar or bipolar stepper motors.
• Voltage regulated spindle speed controlled by parallel interface as function of supply voltage.

*NOTE: P lease SHUT DOWN the power before you plug or unplug the connectors to avoid burning up the board.

  Connection Wiring:

*NOTE : These external tools on the top and bottom of the following picture are only for exhibition, we don't have them to sell at the moment!

Specifications

Electrical properties (ambient temperature Tj = 25 °C pm)：
Input Power	12-36V DC power supply
Stepper motor drive current	1.5A - 3A/phase
Drive type	Double-pole constant flow PWM actuation output
Compatible Stepper motors	2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.

Data Sheet for 57BYGH56-401A Stepper Motor

* If you need other models, Please feel free to contact us!

Content

• 1 x 4 Axis TB6560 Driver Controller
• 4 x Nema 23 57BYGH56-401A Stepper Motor
• 1 x DB25 parallel cable

Services

Estimated Delivery Time (Subject to Stock Availability)
USA (excl. Alaska, Hawaii, Puerto Rico)	USPS First-Class Package/ UPS SurePost/ UPS Ground	3-7 business days
Other Countries (May depart from other stock location)	International Airmail Service	12-21 business days

Please DO CONTACT AND CONFIRM with us BEFORE you bid IF you:

• • Need the item urgently.
• • Require that the item should be delivered within a certain time.
• • Have any other questions/requirements about delivery.

Remarks

• • Usually, your order will be dispatched before the next working day after the full payment is cleared when stock lasts.
• • Notification will be sent after your order is dispatched, please check you email or ebay order records for date of dispatch.
• • It is not guaranteed that parcel should arrive within the time stated above. However, 95%+ parcels will be delivered within the reference time.
• • Please contact us if you have any trouble in receiving your orders. We will help you to track them.

Safe and Easy Payment PayPal

• • We accept PayPal (Allows you to pay by credit cards, debit cards or echecks securely with NO surcharge )
• • If you have difficulty in payment with PayPal, please do contact us for alternative payment solutions.

Remarks

• • Payment is required within 5 days after auction ends.
• • All sales are final. Shipping and handling charges are not negotiable.
• • Your PayPal shipping address will be used for delivery BY DEFAULT unless otherwise informed.
• • Please double-check to make sure your PayPal shipping address is correct before making payment.

Satisfaction Guaranteed 30 Days Money Back Guarantee

• If you are not satisfied with the item purchased from us. Please contact us in writing (e.g. e-mail, eBay message) within 30 days of receipt of goods for return & refund guidance.

Free Replacement

• If you receive a not-as-described (e.g. defective, incorrect, part missing) item, please contact us upon receipt of the item. We will arrange a replacement as soon as the case is confirmed.

12 Months Supplier Warranty

• We provide ONE YEAR warranty on this product from date of purchase. If your item has any warranty issues, please contact us for a satisfying solution.

Requirements

• • All qualified return/replacement must be guided by us. We may not accept your return without communication in advance.
• • Any customs fee, handling charges, postage and insurance incurred in return/replacement are on customer's cost.

Agreement : By placing an order, you acknowledge that you have accepted the terms and conditions of sale. You are welcome to contact us with any questions. Image Gallery Descriptions Specifications What's In Terms & Condition

• Condition: New
• Brand: HY
• MPN: 10015460117100736
• Model: 4 axis TB6560 Nema23 Kit
• Application: Support Software Mach3, Lincxcnc, KCam4, etc
• Modification Description: Holding Torque 1.24N.m (175oz-in)
• Input Voltage: DC 24V 10A
• Number Of Axes: 4

See More