Features: - HBS57 uses advanced motor control DSP chip and vector loop control technology. - High control precision and reliable, low noise and little vibration, no step to lose . - When the motor is continuously overloaded, the driver will output an alarm signal in time, which has the same reliability as the AC servo system.
Drive Specifications:
Type | DSP Closed loop vector control stepper drive | |||
maximum peak current | 5A | |||
Impulse response frequency | 200Khz | |||
Micro-stepping driver | 200~51200ppr | |||
Voltage | DC24-60V | |||
Protective function | Over voltage, over current, tracking error, overproof | |||
Signal input | Support PUL/DIR and CW/CCW modes (difference) Compatible 5~24V signal (Don't need a resistor) | |||
Continuous overload | Output an alarm signal | |||
Type of cooling | Air-cooling | |||
Environment | Keep away from dust, oil, corrosive gas, high humidity and high vibration | |||
Application temperature | 0~50 degree centigrade | |||
Humidity | 40-90%RH | |||
Shake | 10~55Hz/0.15mm | |||
| Min | Typical | Max | Unit |
Output Current | - | - | 5 | A |
Input Voltage | 24 | 36 | 60 | VDC |
Logic Signal Current | 7 | 10 | 16 | mA |
Pulse input frequency | - | 200 | - | kHz |
Isolation Voltage | 500 | - | - | Mohm |
Motor Specifications & Feature: - Step angle: 1.8degree +/-5% - Phase: 2 phase - Rated voltage: 3.4V - Rated current: 4A - Resistance: 1.15 ohm +/-10%(At 20 degree centigrade) - Inductance: 3.6mH +/-20%/Phase - Hold torque: 3N.m - Insulation: B - Rotor inertia: 800g.cm2 - weight: 1.4kg
Application area: - It is suitable for all kinds of small and medium-sized automation equipment and instruments, such as: engraving machine, wire stripping machine, cutting machine, laser machine, plotter, CNC machine tool, automatic assembly equipment, electronic processing equipment, textile and garment equipment. It is especially effective in applications where users expect low noise and high speed.
Package Include: - 1 x Close loop stepper motor(with 118 inch Power Cable) - 1 x Close loop stepper drive - 1 x Encoder cable(118 inch)