Quantity in Lot: | 10 |
Brand: | Hubbell |
Part Number: | SNAP15USBGY |
Color: | Gray |
Type: | USB Charger Receptacle |
Phase (if applicable) : | 1 Phase |
Poles: | 2 |
Wires: | 3 |
NEMA Number: | 5-15R |
Amperage: | 15A |
Voltage: | 125VAC |
Grade: | Specification Grade |
Terminal Type(s): | SNAPConnect Pigtail |
Ground: | Grounding |
10 Hubbell SNAPConnect SNAP15USBGY gray tamper resistant decorator duplex outlets with 2 USB charger ports. Please note that these do not have screw terminals; they must be wired with Hubbell SnapConnectors (purchased separately - part numbers listed below) . SNAPConnect’s modular connector is installed during rough-in in lieu of pigtails. Once the walls are up, the protective covering is removed, and the terminal is simply snapped into the SNAPConnect device for a consistent connection every time. We do not have any SnapConnect terminals so you will need to buy them elsewhere if you do not already have some. Charge your USB powered electronics without giving up an outlet - Compatible with USB 1.1/2.0/3.0 devices. Outlet is Residential Grade, NEMA 5-15R, 2-pole, 3-wire, grounding, SNAPConnect Pigtail required (Pigtail connectors sold separately) , rated 15A 125V, two USB type 2.0 ports 3 Amp, 5 Volt DC . Features include:
As was mentioned several times above, these receptacles require SnapConnect pigtail terminals which are purchased separately to be installed. Here is a list of compatible Hubbell SnapConnect pigtail terminals. We do not have any of the SnapConnect terminals so you will need to buy them elsewhere: