See Details on eBay

pabst blue ribbon beer decal window or bumper sticker

$3.50 Buy It Now 6d 0h, FREE Shipping, 14-Day Returns

Seller: anitakayhoward (369) 99.7%, Location: Fort Wayne, Indiana, Ships to: Worldwide, Item: 263234132130 Pabst decal measures 5 x 5in ..........................................................This is a die cut vinyl decal no back ground NOT a printed sticker .......................................................................................................................................... .........................................................Decals should be applied to a clean warm surface for best adhesion ........................................................................................................................................... ......................................................All decals are sent usps first class mail select economy shipping if you must have a tracking# ........................................................................................................................................................................ ..................................................If your interested in this graphic on a tee shirt see our other auctions or contact us Your new vinyl decal / sticker consists of 3 basic parts: 1. Application Paper Application paper is the masking tape that we apply to the front of your decal to enable installation. 2. Decal This is the actual adhesive decal that you have purchased. It is sandwiched between the application paper and the paper backing. The decal is what ends up installed to the surface. 3. Paper Backing The paper backing is the wax paper that is applied to the ‘sticky’ side of the decal. This backing keeps the decal from sticking to anything prior to install. Installation Suggestion: Roll decal in hollow tube shape prior to installation. This will help with the decal release when applied to surface. Surface Compatibility The surface must be a hard, flat, and non-porous. We strongly suggest you wait at least 60 days after painting a surface before applying any decal, because should you ever wish to remove the decal the paint will come off with it if the paint is not properly cured before application. Surface Temperature and Weather Conditions Adequate surface temperature and weather conditions are important. • The surface temperature should be between 60°F and 90°F, with 70°F to 80°F being the ideal range. • It can’t be raining or even drizzling. Decals must be kept absolutely dry until installed. • Avoid installing decals in direct sunlight. Surface temperatures in direct sunlight often change rapidly and could cause blistering or poor adhesion of decal. Installation 1. Determine surface for decal to be applied to. Wash with soap and water or glass cleaner as appropriate and dry thoroughly. Surface should be dirt, oil, moisture, and lint free. 2. Tack decal to the surface using masking tape with sticker facing front (not backwards). Once you are satisfied with the positioning, tape the entire length of the top edge using one continuous strip of tape. This will create a "hinge" along the top, still allowing the paper backing to be removed. 3. Peel the paper backing off carefully, the decal will stick to the application tape. Start at a corner on the hinged edge and peel back gently. Be sure that the decal does not touch anything until it is burnished. Note: Make sure that entire decal sticks to the application paper. 4. Using a plastic squeegee, driver’s license, credit card, etc. burnish with firm steady pressure. Start each stroke in the center and burnish in straight parallel strokes. Overlap each stroke to avoid bubbles and wrinkles. Be sure not to let the decal touch the surface until the burnisher puts it there. 5. Remove masking tape used to position decal in step 2, carefully pull the application paper at a sharp angle. Start at a top corner, and pull down as parallel to the surface as feasible. Note: Verify that the decal is staying attached to surface when removing the application paper. Dealing with Bubbles You may possibly end up with some bubbles in your decal job. Small bubbles will go away in time (the film breathes, and will flatten out after a few weeks at an appropriate temperature). If you want to work on the bubbles immediately apply moderate heat, then poke them with a pin, pressing the vinyl down with your thumb immediately afterwards. Condition: Used, Condition: new unused

PicClick Insights PicClick Exclusive

  •  Popularity - 31 views, 1.3 views per day, 24 days on eBay. High amount of views. Good amount sold, 2 Sold, 49 Available.
  •  Price -
  •  Seller - Over 369 items sold. 0.3% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved