USA 20L Lab Top-mounted electric agitator Overhead Stirrer Mixer Digital Display

parameter: Large mixing amount (H, O): 20L Motor input power: 72W Motor output power: 60W Mixer power: 80W Voltage: 100-240V Speed: 100-2000rpm Speed display: LCD Variable speed: 20rpm Torque: 40 (N/CM) Overload protection: automatic shutdown Maximum viscosity [MPAS]: 10000 Drilling chuck clamping diameter range [VAC]: 0.5-10 DIN EN60589 protection method: IP42 Allowable ambient temperature [°C]: 5-40 Allowable ambient humidity [%]: 80

USA 20L Lab Top-mounted electric agitator Overhead Stirrer Mixer Digital Display

Digital Display 20L Lab Electric Overhead Stirrer Mixer Agitator Speed Adjustable

---

Description

Overhead Electric Agitator, DC Permanent Magnet Motor, Low Noise, Maintenance-free. Stable Start, Overload Protection, Loop Protection, Adjustable Speed, Precise and Controllable. 

 

What's Included?  

1 *Host

1 *Stirring Rod

1 * Pillar

1 * Thick Bottom

 

 

 

 

 

 

 

Features & Highlights 

1. Competent for High Load

Can Work Continuously for a Long Time and Perform Well.

2. Condensation Tongs Are Wrapped in Rubber

The Condensation Tongs Are Wrapped in Rubber, Which Increases Friction and Effectively Clamps the Container. the Torque Can Be Adjusted Automatically According to the Change of Sample Viscosity.

3. High and Low Speed, Accurate and Controllable

Cd Shows the Set Value and Actual Value of Speed, and Can Monitor the Speed

and Time in Real Time. the Speed Range Is Wide 100-2000rpm, Constant Speed, High and Low Speed Can Be Accurately Controlled.

 

Range of Use:

It Is a Good Tool for Petroleum, Chemical, Metallurgy, Textile, Food, Medicine and Sanitation, Environmental Protection, Biochemical Laboratory, Analysis Room, Education and Research.

 

Steps:

Press and Hold the Right Button to Start, Press the Setting Button to Select the Setting

① Press the Setting Button Once, the Mode Flashes, Press the Upper and Lower Two Buttons in the Middle to Select the Mode, There Are Three Modes Corresponding to Different Speed and Time Respectively.

② Select the Mode, Press the Setting Button Again, the Rpm Flashes, and Use the up and down Keys to Set the Desired Speed per Minute.

③ After Setting the Speed, Press the Setting Key, Min Flashes, Use the up and down Keys to Set the Required Timing Time, the Speed Reaches the Set Speed After Starting, and the Timing Starts.

④ Set the Above Parameters in a Specific Mode, Long Press the Set Button, the Screen Flashes, Indicating That the Parameter Has Been Saved in This Mode, Next Time Only Need to Select the Mode Corresponding to the Set Speed and Time, Press the Right Button to Start and Pause, Long the Key Is Turned off.

 

 

 

Statement (FDA, ARTG) The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. If you have questions about legal obligations regarding sales of medical devices, you should consult with the FDA's Center for Devices and Radiological Health: https://www.fda.gov/cdrh/devadvice/ https://www.fda.gov/cdrh/industry/support/index.html Thank you for your cooperation.

 

PaymentDelivery detailsTerms of salesAbout usContact usPayment   We accept ebay payment 。 Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility. Delivery details Shipping:   2-9 working days to: USA   Terms of sales

•  
• We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!

 

•  

About us Your satis faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects. a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package. b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item. c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid. Thank you. Contact us Business Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time) Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday. Please contact us with ebay message. Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time) Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday. Please contact us with ebay message. Please feel free to contact us if you have any questions.

Features3:	Stable characteristics, high reliability
Features2:	Made of high quality material, Durable
Features 1:	stable performance,Durable
Features 1	stable performance,Durable
Features3	Stable characteristics, high reliability
Features2	Made of high quality material, Durable
* Feature *:	🔥high performance🔥reliable quality🔥good stability
√Service√	√Any problem, please contact the seller√
--Service--	Any problem, please contact the seller!
Brand	Unbranded
MPN	Does Not Apply
Large mixing capacity (H, O)	20L
Motor input power	72W
Motor output power	60W
Mixing machine power	80W
Voltage	100-240V
Speed	100-2000rpm
Speed Display	LCD
Variable Speed	20rpm
Torque	40 (N/Cm)
Overload Protection	Automatic Shutdown
Maximum Viscosity [Mpas]	10000
Drilling Chuck Clamping Diameter Range [Vac]	0.5-10
Din En60589 Protection Method	IP42
Allowable Ambient Temperature [°C]	5-40
Allowable Ambient Humidity [%]	80
Product	Overhead Stirrer

• Condition: New
• Features3:: Stable characteristics, high reliability
• Features2:: Made of high quality material, Durable
• Features 1:: stable performance,Durable
• Features 1: stable performance,Durable
• Features3: Stable characteristics, high reliability
• Features2: Made of high quality material, Durable
• * Feature *:: 🔥high performance🔥reliable quality🔥good stability
• √Service√: √Any problem, please contact the seller√
• --Service--: Any problem, please contact the seller!
• Brand: Unbranded
• Large mixing capacity (H, O): 20L
• Motor input power: 72W
• Motor output power: 60W
• Mixing machine power: 80W
• Voltage: 100-240V
• Speed: 100-2000rpm
• Speed Display: LCD
• Variable Speed: 20rpm
• Torque: 40 (N/Cm)
• Overload Protection: Automatic Shutdown
• Maximum Viscosity [Mpas]: 10000
• Drilling Chuck Clamping Diameter Range [Vac]: 0.5-10
• Din En60589 Protection Method: IP42
• Allowable Ambient Temperature [°C]: 5-40
• Allowable Ambient Humidity [%]: 80
• Product: Overhead Stirrer

See More