Toyota Touch Up Paint Blizzard Pearl White Code 070 - All 3 steps

$14.99 Buy It Now or Best Offer 14d 8h, $1.99 Shipping, 30-Day Returns, eBay Money Back Guarantee

Seller: touchup1 (25,202) 99.4%, Location: USA, Ships to: Worldwide, Item: 321683249048 ‘You are bidding on a tricoat paint system 1/2 fluid OZ Of base1/2 fluid OZ Of midcoat1/2 fluid OZ clear Application tips tricoat paint what that means is that different coats of paint when applied at the factory. First coat is a basecoat of color. Second a second coat of transparent pearl color, called the midcoat.This coat is applied very thin to give the pearl effect. Last a coat of clear is applied. In order to successfully match a tri-coat, you should practice on a scrap piece of metal. Application First apply the basecoat. This is the main color coat. Make sure this has thoroughly dried for at least a few hours. Next, apply the midcoat layer. This color goes on very thinly and you must practice a bit to get it right. Finally, you apply the clearcoat to achieve the correct color. Make sure to get the primer and basecoat are sanded very smooth before applying the additional stages of paint. The primer should be wet sanded before applying the paint. Once the midcoat is applied over the basecoat, it becomes very difficult to smooth the basecoat paint. You can use #1500 grit sandpaper or rubbing compound to smooth the paint. Always let the basecoat dry thoroughly before applying the midcoat. Then, let the midcoat dry thoroughly before applying the clearcoat. The real trick is applying the midcoat over the basecoat to achieve the right color. It's like using a colored transparent piece of plastic over the basecoat to change the color. Add too little, and the basecoat won't be changed enough; add too much, and you will change the basecoat too much and have to start over again. Make sure you PRACTICE OFF the vehicle to see how it turns out and keep comparing your practice work to the vehicle color. Midcoats are best sprayed, but if you use very thin coats brushing, you can do a reasonable job. Applying tricoat is more difficult than a regular base-coat/clearcoat combination but with some practice you can achieve satisfactory results. Application Tips Paint on a clean, dry surface. Paint when the temperature is between 60°F - 80°F (16°C - 27°C) with relative humidity of no more than 60%. Practice on a discardable object. Use only in a well ventilated area. Stir the paint well, prior to and intermittently during use.Keep away from heat, sparks and open flame. If you want to add a professional touch paint kit you can for $ 5.99 no additional shipping.Paint is additional. The kit includes 2 adhesive backed sanding sponges 1 X 1 ¾. 2 sheets of 600 wet sandpaper 1 X 1 ¾. 2 sheets of 1500 wet sandpaper 1 X 1 ¾. 2 micro brushes. Just send a note before paying and I will add it to your invoiceor purchase the kit through my ebay auction. Condition: New, Manufacturer Part Number: 070, Brand: generic

PicClick Insights PicClick Exclusive
  •  Popularity - 18,172 views, 10.7 views per day, 1,692 days on eBay. Super high amount of views. 739 sold, 13 available.
  •  Price -
  •  Seller - 25,202+ items sold. 0.6% negative feedback. Great seller with very good positive feedback and over 50 ratings.
Similar Items