ADE RD3-018 SPIKE GREEN Dot For Smith Wesson SW MP 5.7, Equalize,Shield Plus 9mm

• • ADE Just Released The New 4MOA GREEN Dot version of the RD3-018 SPIKE! This is the GREEN DOT that customer have been waiting!  The Spike now available in 3 models. Black body 4MOA Red dot, Black body 4MOA GREEN dot(this one) and FDE/TAN body 4MOA Red dot.

  • Designed to fit Canik TP9 Elite SC, TP9 SFT, Canik Mete SFT(and Pro)， Canik METE MC9, Canik Rival SFX, Taurus GX4 Toro / Taurus TX22 Compact / Taurus 865 Toro, TX22 Compact,  Sig P365XL, P365X, P365X Micro, P365XL Spectre Comp, Sig P322, Ruger Max-9, Kimber R7 Mako, Bul SAS II ULTRALITE, S&W MP 5.7, S&W Equalizer 9mm, S&W MP9 EZ, S&W M&P9 shield plus Optics Ready, S&W M&P shield plus performance center, S&W M&P shield plus 30 Super Carry, Mossberg MC2SC/MC2c, Girsan MC1911SC Ultimate, Masada Slim, Girsan/EAA Regard MC, Girsan MC1911 SC Ultimate, Glock 43 MOS, Glock 48 MOS, Walther PPS M2 Optics Ready, Stoeger SRT-9MC, Sccy CPX-1, DVG-1 RDR CPX-2 RDR, Bul Armory SAS II lightweight 3.25 Comp, Springfield XDS MOD 2 OSP 9mm, Springfield Elite 3.8” Compact OSP 9mm and Springfield Hellcat OSP, Hellcat Pro, Hellcat RDP and other same footprint sights. 

  • Ade SPIKE created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the green dot  to become a back up iron sight. With the ultra short design, the green  dot provides a distance /gap on some of full size optics ready pistol, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight. For non-optics ready pistols that need to use an optic plate/adapter to replace the pistol manufacture equipped rear sight, ADE Spike's rear white dot will acts as a pistol factory original rear sight for Co-Witness. 

      Designed to fit

     

    Bul Armory SAS II lightweight 3.25 Comp

    Canik Elite TP9 SC

    Canik METE SFX

    Canik METE SFT

    Sig P320 Xten (Using Sig provided plate marked for Leopold Deltapoint Pro optic footprint)

    Sig P365X/P365XL/P365XL SPECTRE COMP

    Sig P322

    Sig P365-380(make sure your model is exactly called "P365-380", not P360 or P380)

    Sccy cpx-2

    Ruger Max-9

    Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS)

    Springfield Hellcat OSP

    Springfield XDS MOD 2 OSP

    Springfield Elite 3.8” Compact OSP 9mm 

    S&W Shield 2.0 Optics Ready

    S&W M&P9 shield plus Optics Ready

    S&W 9mm Equalizer

    S&W MP9 EZ

    S&W MP 5.7(all series)

    S&W M&P shield plus performance center

    Walther PPS M2 Optics Ready

    Girsan MC1911SC Ultimate

    Mossberg MC2SC/MC2c

    Mossberg 940 pro turkey

    Taurus GX4 Toro / Taurus TX22 Compact / Taurus 865 Toro

    Masada SLIM

    Rock Island STK-100

    Plus any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint. 

     

    Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens. 

    ADE SPIKE green  dot sight is always powered on with automatic brightness. Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 700 microampere powers to give a very long battery life.  The brightness will turn high and low accordingly to the environment brightness. 

    4MOA 

    Weight approximately .66oz/17.5grams

    (Length)1.6" x (Width).92" x (Height).93"

    Comes with 3 pairs of screws for Sig P365XL/X, Springfield Hellcat OSP and Canik TP9 Elite SC ONLY. The provided screws might NOT work with EVERY compatible pistol listed. ADE makes the red dot to accept the industrial standard footprint. The pistol manufacturer makes the optic cut/slide for the same footprint, but they have their own opinions to decide which type screws that the screw holes take.

    ADE Does not know the screw spec every pistol manufacture used for their screw hole. Please ask the pistol manufacture what screw specs they used on the hole and ask them to provide the screw. If you can’t get the screw to work properly, we recommend going to a local hardware store such as ACE Hardware to get the right size.

    Just like some $400 competitors,  It does not has a on/off power button. The light turns brighter or lower automatically. If you do not use it, put the provided rubber cover on it, then the sight will be "sleeping" in a very very low power mode.  

    • Ade Advanced Optics first made its appearance in the firearms accessory industry by doing private label production for several Major manufacturers and retailers. During this period, Ade Advanced Optics began receiving requests from numerous customers for access to the affordable, high quality products that Ade Advanced Optics was capable of producing. By soliciting feedback from both clients and end users in 2010, Ade Advanced Optics was able to overcome the challenges a new company often faces when entering a global market and industry, especially one as competitive as the shooting, hunting, and outdoors industry.

  •  Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun. 

• Below are the footprint information about ADE red dots. 

• ADE RD3-006B, RD3-009, RD3-012, and RD3-013 fit optic cut/plate that is compatible with Vortex Venom/Burris Fastfire/Doctor footprint

  ADE RD3-018 Spike, RD3-021 Nuwa fit optic cut/plate that is compatible with Shield RMS/RMSC/Leopold Deltapoint Pro/Sig Romeo Zero footprint

  ADE RD3-019 Stingray, RD3-020 Raptor, RD3-023 Valkyrie Gen2 fit optic cut/optic plate that is compatible with Trijicon RMR/ HS407C/HS507C/HS508T footprint

   

We accept any payment method ebay allows such as paypal at the checkout. 

We ship all items within one business day of receiving cleared payments. For payments received by 2pm PsT(Pacific Daylight Time), the package usually ships in the same day. 

Free shipping  within 1 business day with tracking number.

No international shipping!

You can return any purchase that is Undamaged in like new condition within 30 days for full money back or exchange.

If you have any question, please click contact seller. We always reply emails within 8 hours.