Ships to: Worldwide,
Item:233240065867Star Trek TOS, "Star Trek, Art Asylum / Diamond Select; Tricorder Aluminum Faceplate, Mini Knobs, Drilled and Tapped, Includes The Knob Screws !! PRICE IS PER SET TO INCLUDE: One Die Cut Face Plate nominal 3.80" x 1.80" x 0.02" thick and die-cut as shown. One swatch of Coronet vintage transistor metal speaker fabric and, Three machined aluminum T-Jet knobs with screws. JEWELS SOLD SEPARATE IN A VARIETY OF COLOR WAYS. CLICK HERE TO JUMP TO TRICORDER AND OTHER JEWEL SETS. Also, VISIT MY STORE ON EBAY. Multiples ship at "one BASE shipping charge" so shipping is combined. Plate Detailed Dimensions: Very precise to retrofit onto a stock AA/DS Tricorder. Plastic Tricorder face-plate will require modification, you are the prop builder! Speaker Square Opening:The Die Cut Face Plate hole is square to conform to the ideal historic "look" of the Set Used Tricorder. The square shape provides some space between the plate and AA/DS Tricorder structure so the grill fabric can fit, flush, most easily. The AA/DS speaker plastic rectangular hole will require some trimming back on all sides, with a utility knife, when fitting the plate and Coronet Fabric over the existing AA/DS Tricorder structure. Machined aluminum T-Jet Knob has integral boss on rear-side that mounts to Tricorder panel; for that authentic museum look.Knob Dimensions: Overall prop accurate 1/4" nominal diameter x 1/8" nominal height. Includes M2 x 6.5 mm (1/16" dia. x 1/4" long English nominal) button head Phillips screw to accommodate even the thicker .060 (1/16") Tricorder face plate!Coronet Fabric Dimensions: Slightly over-sized to be sure it fits beyond the edge of the hole.Very high grade. Inspired by the many Tricorders and the Rodd Tricorder Kit in my archive; all inspected and reviewed while undertaking the engineering of this mini control knob and panel.Installation with contact cement (experienced builders) or with epoxy/CA is suggested. Metal is 0.020" thin so you will not see a seam at screen intersection/cut-out: Glue-onto the prop prior-to applying further metal grain. A Scotch-Bright or 220 grit sandpaper is suggested if you want a deeper grain. You are the prop builder.THESE FACE-PLATES HAVE A FRONT AND BACK SO TAKE CARE WHEN INSTALLING (avoid upside-down install LOL).International Shipping Restrictions & Terms of Sale:You are agree to and ratify, by electronic signature for order and related payment, the following all-inclusive and entire Binding-Agreement between the Buyer (You) and Seller (Me);-This Binding Agreement survives all attempted and, or, actual rescission of payment and, or, the willful purchase, of this product,-This is an ebay sale subject to ebay policy and/or PayPal policy, METAL PARTS; Prior to use, all Metal Parts MUST be cleaned to remove machine coolant residue. RESIDUE IS NOT VISIBLE AND DOES NOT FEEL OILY, BUT IT IS THERE! Use dish-washing detergent such as "Dawn" or "Palmolive" to insure a clean part.Condition:New, Universe:Original Series, Featured Refinements:Star Trek Original Series Tricorder, Character:Captain James T. Kirk, Modified Item:No, Type:Tricorder, Convention/Event:New York Comic Con, Series/Movie:Original Series
PicClick Insights for "
Star Trek TOS, Tricorder Die Cut Face-Plate, 3 Metal T-Jets, Coronet Fabric