ONE 6.875"x0.125"x0.062" HIGH PURITY SINGLE BORE ALUMINA CERAMIC TUBE No.: 147

$18.00 Buy It Now 13d 19h, Click to see shipping cost, 30-Day Returns, eBay Money Back Guarantee

Seller: advancer53 (3,233) 100%, Location: Baldwinsville, New York, Ships to: Worldwide, Item: 301303384973 6.875" LONG SMALL DIAMETER HIGH PURITY SINGLE BORE ALUMINA CERAMIC TUBING STOCK REFRACTORY No.: 147You are buying ONE (1) only of a 6.875" Long Small Diameter High Purity Alumina Ceramic Tubes Tubing Stock. They are in mint condition being NOS (New Old Stock). They are made from 99% purity Aluminum Oxide (Al2O3) which of course is Alumina. Generally the balance of composition for this purity Alumina material is of Silicon Dioxide (SiO2) which is Silica.These tubes are fired to full density; and are therefore not porous. This material has very high hardness, very high stiffness, very good corrosion resistance to chemicals at high temperature, and very high refractoriness or use temperature. They may be used for a variety of electrical, mechanical, and thermal applications. They may be used as setter plates for firing parts in a kiln. The may be used for high temperature furnaces and as high temperature refractory turntables. They may also be used for jewelry or for applications requiring high wear or abrasion resistance. Your imagination is the only limiting factor in the spectrum of possible applications for this component. Be sure to view all photos as they are an integral component of the item description. The specifications for these components are as follows: Outside Diameter: Average Approximately 0.125" +/- 0.006" or (3.18 +/- 0.15 mm)Inside Diameter: Average Approximately 0.062” +/- 0.003" or (1.57 +/- 0.08 mm)Wall Thickness: Average Approximately 0.030” (0.75 mm)Length: Average Approximately 6.875” +/- 0.063" (174 mm) Please Note: These are precision technical ceramic components. There is no warp or camber on these items. They are straight and round. The thermal shock resistance is not very high so exercise rule of thumb caution. “The larger the piece of material the slower the rate of temperature increase should be applied to the piece.” Heat up slowly to avoid cracking in use. Specific Gravity or Density: 3.9 g/cm3Water Absorption or Porosity: 0%Fusion Temperature or Melting Temperature: 2000 °C or 3632 °FMaximum Working Temperature: 1500 °C or 2732 °FThermal Conductivity: 25 W/m* KSpecific Heat: 0.9 J/g*KExpansion Coefficient or CTE: 7.5 x 10 E -6 inches/°CElectrical Resistivity at 20 C: 10 E 14 Ohm*cmElectrical resistance at 600 C: 10 E 8 Ohm*cm Modulus of Elasticity: 44 x 10 E 6 p.s.i. or 350 GPa. These components were not specifically manufactured for an individual application; therefore be sure to check the dimensional descriptions carefully for your application. Future returns or requests for refunds, because of some "fit" issue or the like will not be honored. Please check the other Alumina tubing component variants that are available in my listings for the model or models that best fits your requirement. Your imagination is the only limiting factor in the spectrum of possible applications for these components and materials. If you require additional technical information, design, or application engineering consultation, feel free to contact us. As a materials scientist with four decades experience in high temperature processing, ceramics, dentistry, and jewelry manufacture it will be possible to provide you with creative and imaginative approaches to your requirements. Feel free to ask any questions you may have regarding this item early. Use PayPal only. Combined shipping discount is provided for multiple item purchases. For best results, please be sure to shop using cart, then complete the paying transaction when you are satisfied that all the items you need are in the cart. Items purchased separately will be shipped separately as a unique transaction. Please complete payment transactions within 3 days. Items are generally shipped via USPS first class mail with delivery confirmation. Ask about shipping costs to your country. Feedback is provided for all buyers. We will appreciate yours as well. We strive to maintain excellent customer service; and are able to solve virtually any issues you may have. Every effort to provide the most accurate information about this item and every appropriate precaution in packaging this item is made, to assure that your highest expectations and satisfaction are met, and are exercised to meet this requirement for excellence. In winning this auction or purchasing this item you are agreeing that you will first provide the seller every opportunity to provide redress or resolution to any issues you many have concerning this item, prior to leaving any negative feedback about the seller or the item. No.: 147 Condition: New, Model: 96% Alumina, Country/Region of Manufacture: United States, MPN: N/A, Brand: AdvanCer-HPM

PicClick Insights PicClick Exclusive
  •  Popularity - 5,875 views, 3.1 views per day, 1,874 days on eBay. Super high amount of views. 96 sold, 2 available.
  •  Price -
  •  Seller - 3,233+ items sold. 0% negative feedback. Top-Rated Seller! Ships on time with tracking, 0 problems with past sales.
Similar Items