The D100 is the largest and strongest of Kurt Workholding’s general purpose vises. With a 9-3/4” jaw opening and up to 16,163 pounds of clamping force, it has the capacity and strength to take on your highest horsepower milling cuts. It’s the most precise and rugged 10” production vise in the world.
Inch | Pounds | |
A | 3.875 | x |
B | 10.000 | x |
C | 27.500 | x |
D | 5.875 | x |
E | 0.813 | x |
F | 2.465 | x |
G | 2.950 | x |
H | 2.937 | x |
J | 1.320 | x |
K | 8.630 | x |
L | 2.225 | x |
N | 1.625 | x |
O | 5.750 | x |
P | 3/4-10 | x |
Q | 14.500 | x |
R | 13.250 | x |
S | 6.188 | x |
T | 10.590 | x |
U | 0.940 | x |
V | 1.690 | x |
W | 1 | x |
AA | 9-3/4 | x |
AA MIN | 0 | x |
BB | 14.000 | x |
BB MIN | 3.500 | x |
CC | 19.750 | x |
CC MIN | 9.200 | x |
DD | 24.00 | x |
DD MIN | 13.500 | x |
Ship Wt. | x
300
| |
Back to Top ^
Torque Ft. Lbs. | D100 |
20 | 1698 |
40 | 3300 |
60 | 4686 |
80 | 6623 |
100 | 7842 |
120 | 9970 |
140 | 11429 |
160 | 12792 |
180 | 14681 |
200 | 16163 |
220 | 18124 |
240 | 20563 |
260 | 22093 |
280 | 24077 |
300 |