GE Inspection Krautkramer MIC10 Hardness Tester UCI Ultrasonic Flaw Detector NDT w/ New Probe! $13K Retail! WE BUY YOUR USED EQUIPMENT!

$6,499.00 Buy It Now or Best Offer Unsold, FREE Shipping, 30-Day Returns, eBay Money Back Guarantee

Seller: gp-technical (134) 100%, Location: Pooler, Georgia, Ships to: Worldwide, Item: 253892442422 GE MIC 10 Hardness Tester Ultrasonic Flaw DetectorStock #160624A This is a like new complete kit, which includes all GE Krautkramer branded accessories. This unit uses a 205 (5kg) probe, which makes this one of the most sought after portable UCI hardness testers on the market. The MIC10 has been a reliable, easy to use instrument, due to the simple form factor and ultra lightweight design. The kit is complete and ready to use out of the box. The probe has absolutely no wear, and the unit looks absolutely like new. Don't miss out on this opportunity to get a like new condition hardness tester at a fraction of the $13,300 retail cost. Included with Sale-GE MIC 10-Case-Probe-Cable Specifications:Quick hardness testing wherever you wish.As with all other hardness testers from our MICRODUR line, the MIC 10 operates according to the UCI method (Ultrasonic Contact Impedance). This method enables quick and easy measurement: position probe and read off the value. This operational ease is achieved because the Vickers diamond indent in the material’s surface is electronically measured and instantly displayed as a hardness value without using the Quick hardness testing wherever you wish.cumbersome optical evaluation of a microscope normally associated with Vickers hardness testing. The small, handy MIC 10 makes life easy for you: a hardness tester that you can take anywhere - on scaffolds for testing large containers and pipes, or for testing components at any location. The small narrow probes even enable you to make measurements on positions difficult to access, such as tooth flanks or roots of gears. You can measure in any direction, e.g. in the horizontal or overhead positions. The instrument carrier and prop-up stand permits two hand operation, for correct probe positioning and guidance. Easy operation, high performance and unique data processing. Conforms to ASTM A1038-05 UCI METHODWhat this small instrument can do. By pressing a key, you can display your reading as a single value or as the active arithmetical average value of a hardness measurement set. Editing of erroneous single values, without having to interrupt the measurement set, is just as simple. Adjustable alarm thresholds show you critical measurement values both visually and with audiable alarms. The calibration parameters for measurements on low and non-alloyed steel are preprogrammed into the MIC10; however, the instrument can be easily and quickly recalibrated to other materials. Instrument operation can be customized for specific testing requirements: unnecessary functions can be inhibited, e.g. various hardness scales or the recalibration capability. This reduces key presses and simplifies operation.Saving data - unlimited possibilities.We have given a lot of thoughts to the subject of saving data and have come up with the MIC 10 DL in order to give you special support with repetitive testing and documentation. Memory cards are available in addition to the internal memory of the instrument, these not only store measurement data but also material dependent instrument settings and report formats. You are able to calibrate the instrument automatically for specific material using the information stored on the memory card. Reports can be created in an individual format and printed via the RS 232C interface of the MIC 10. Once again, the operation is simple: switch on data logger or insert a memory card and measure. After measurement, the complete measurement set is automatically stored at the next available location and can be recalled at any time, displayed and printed. Additionally, the user programs of the UltraHARD series offer you a range of possibilities for data transfer to a PC and further data processing like evaluation, statistics and documentation. Method of measurement: Vickers penetration with indentation evaluation by the UCI method under load (diamond angle 136°)UCI probes: To be selected according to application:Handheld probes: 10 N (1 kgf) standard MIC 201-A short MIC 201-AS extended MIC 201-AL 50 N (5 kgf) standard MIC 205-A short MIC 205-AS extended MIC 205-AL 98 N (10 kgf) standard MIC 2010-AMotor probes: 8.6 N (0.9 kgf) MIC 211 3 N (0.3 kgf) MIC 2103-A 1 N (0.1 kgf) MIC 2101-ARange: 20 - 1740 HV Conversion: HV, HB, HRC, HRB N/mm² (only with the 10 kgf handheld probe) according to DIN 50150, ASTM E 140 Display: 4 digit LCD with switchable backlight Weight: approx. 300g Dimensions: 160 x 70 x 45 mm, 6.3 x 2.8 x 1.8 inches (W x H x D) Permissible ambient temperature: In operation: -15°C to 55°C(5°F to 131°F) In storage: -20°C to 60°C (-4°F to 140°F) Power: 2 x 1.5V AA batteries Operational duration: approx. 15 hours without backlight Trade Ins: We offer some of the highest prices on your used test equipment. We do partial trade ins or will buy your used equipment outright. An estimated trade in value will be assessed within 24 hours of receiving a value request. Payment terms: We accept payment prior to shipping by Visa, MasterCard, AMEX, and Paypal (up to $10.000). Businesses and Universities, please call for payment options. Please notify us of method of payment in a timely fashion after the auction has ended. If a buyer has not made any attempt to contact us 7 days after this auction's end time we will assume they are forfeiting the auction and the item will no longer be available to them. International Buyers: We reserve the right to accept or decline international Paypal and credit cards. International shipping is available, but clearing customs will often result in delivery delays.Shipping Terms: Buyer pays for shipping and packaging for this item. International buyers will pay for shipping charges to their country. * Shipping and handling fees are not refundable under any circumstances. In the case of a return, the buyer is responsible for all shipping fees.* Shipping for international buyers will be invoiced separately from the purchased product due to the high expense of shipping charges.* Your phone number is required for shipping purposes, so please provide it with all correspondence.* Please note that calculated shipping is based on UPS. We also reserve the right to ship for the same cost via FedEx or other carriers. Packaging: All items will be packaged with materials necessary to ensure that the equipment will be adequately protected from the shipping process. Feedback: We appreciate Positive feedback. We leave feedback as soon as we get feedback from you. If you have any problems with the sale, please try to resolve it with us before you leave us a Neutral or Negative feedback.Warranty: No warranty is expressed or implied with any unit. All sales include a 3 day right of return (ROR). For any reason, within 72 hours of taking possession of the item, the buyer can return the item for a complete refund minus all shipping costs. Return Policy: You can return the item for any reason within three days. We put great effort into thoroughly documenting each piece of equipment, typically with very detailed pictures and video clips. We strongly encourage you to study these images closely before you commit to purchasing the item. Please call or email us if you have any questions about anything that you are uncertain about. It is critical that you confirm that this item suites your needs within the three day return policy period. Any returns after two weeks will not be entertained, and we will automatically escalate to Ebay. If you choose to open an Ebay return case, and we are forced to accept the return, you are responsible for the following: *Return Shipping and insurance of the item to our Store at the following address: GP-Technical246 Pooler Parkway Suite EPooler, GA 31322(843)694-6535 *A Restocking fee of 10% of the purchase price for every week (after the initial 3 day return period) that the item is in your possession, not to exceed two weeks. Condition: Used, Condition: This GE MIC 10 is in great working condition with all of the buttons and functions working as they should from the factory. This unit shows some light signs of use but it is nothing that will limit the functionality. There are some small scratches and scuffs on the body from where the unit rests while not in use, overall this unit has been tested to work and is ready for use as soon as you get it in your hands out of the shipping package., Country/Region of Manufacture: United States, MPN: panametrics olympus proceq xrf, Brand: GE MIC 10

PicClick Insights PicClick Exclusive
  •  Popularity - 696 views, 6.1 views per day, 114 days on eBay. Super high amount of views. 0 sold, 1 available.
  •  Price -
  •  Seller - 134+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.
Similar Items