Autoclavable | 121°C for 30 min, except for the bed support |
Bed Height | 46-55 cm1) |
Bed Height Packing With Extension Max. | 74 cm2) |
Bed Height Running With Extension Max. | N/A3) |
Bed Support | Net |
Bed Volume | 7-8.4 l4) |
Bed Volume Packing With Extension Max. | 11.3 l5) |
Bed Volume Running With Extension Max. | N/A6) |
Column Cross Section Area | 154 cm2 |
Complete Packsize | 1 Piece |
Compliance | The product fulfills valid directives and standards when used within the conditions specified in the user manual. The product must also be used in the same state as it was delivered from GE Healthcare and connected only to other CE labeled GE Healthcare modules or other products as recommended. For regulatory details please see declaration of conformity. |
Connections | 25 mm TC |
Dimensions | 590 x 590 x 1720 mm |
Foot Print | 590 x 590 mm |
Inlet Dimension i.d. | 6 mm |
Material [Bed Support] | Polyamid (PA), Polyetheretherketone (PEEK), Polypropylene (PP) |
Material [Column Tube] | Glass Borosilicate 3.3 |
Material [Lid] | 316L Stainless Steel (SS) |
Material [Seal] | Ethylene propylene diene (EPDM), Fluoroethenepropene (FEP) |
Material [Stand] | 316L Stainless Steel (SS) |
Operating Pressure Max. | 6 bar (87.02 psi) |
Operating Temperature | 4°C-40°C |
Order Information | Stand not included for column sizes 100-200 |
Outer Height | 1720 mm |
Porosity | 10 µm, 12 µm, 23 µm and 54 µm |