See Details on eBay

Fast-tool-change UNIMAT lathe 3/8-24 Jacobs Drill Chuck Adapter Steel LatheCity

$9.99 Buy It Now Sold, $4.00 Shipping, 14-Day Returns

Seller: lathecity (1,071) 100%, Location: Fargo, North Dakota, Ships to: Worldwide, Item: 261248693105 Shop vacation August 10th to August 18th (anyway orders will go out within 3 days) UNIMAT Lathe Fast Tool Change System Connects a standard Jacobs drill chuck to UNIMAT tailstock/headstock 3/8”-24 threaded end (steel) to pin end (tool steel) Included: One adapter as described, brief one page manual, LatheCity safety booklet. Not included: A lathe, cross-slide etc. may also be shown to illustrate how the tool works. A lathe etc. is obviously NOT included. Size: English 3/8”-24 bolt end to (7.2 mm) pin end that fits tight in metric UNIMAT tailstock/headstock. The accessory is tested on an UNIMAT SL DB 200 and may not work for other UNIMAT versions. Purpose of that tool: Connects standard Jacobs drill chuck to UNIMAT tailstock. Fast tool change: Board to twiddle around on an M12-1.0 bushings to connect accessories to an UNIMAT spindle? Why continue with that? Our accessory has a tool steel pin end, machined to close tolerance, which can simply be inserted into an UNIMAT tailstock/headstock, resulting in a tight fit (almost as with a Morse type accessory). Pull it out & insert it fast: fast tool change system. Safety Notes, Trouble Shooting, and Disclaimer: General safety rules for machine/power tools are in place. For an extended list of safety notes, consult the literature. LatheCity shall not be liable for any damage caused by unprofessional use of LatheCity accessories. Design details (diameter of stock rod used, etc.) may deviate from the image shown which does not affect the function of the accessory. Tailstock accessories (also Morse type pieces) may start to rotate in the tailstock under heavy load. If that happens, stop the lathe; don’t try to hold/stop the accessory with your fingers. In order to prevent this from happening use a sharp drill bit and cutting oil on the drill bit (not on the pin end). Use a small feed rate for the drill and watch the operation closely. Our tests did show that the pin end connection is tight enough for center drilling and boring with not too large diameter drill bits. Dead centers can over-heat. If this happens let the center cool down. Use cutting oil to prevent this from happening. Use safety glasses rated for metal work as well as protective gear. How is the piece made? The tool steel pin is pressed into a threaded steel round using a hydraulic hand press. A mechanical press may work if you have really big mussels…, but very likely you would not get the pin in deep enough. Hammering it in? You never get the pin in straight and would damage the end of it. Thus, what we write here, that simple looking piece is trickier to make than it looks like. The tight tolerance to the UNIMAT spindle and perfect surface finish (tool steel) result in a tight enough fit. A flat is milled in the end of the tool steel pin in order to use a ¼” wrench when mounting the adapter in a Jacobs drill chuck. Returns in resalable condition accepted within 14 calendar days (eBay) or 30 days (LatheCity), no questions asked. However, we do NOT reimburse shipping costs, credit card fees, broker fees, taxes, etc. We will charge the respective shipping costs to customers for products that were offered as free shipping when returned. We charge up to $5 for damaged manuals and safety booklets if these need to be reprinted. Return items in resalable condition. Product details may deviate from images shown without compromising the function of the tool. For example, stock diameters may differ. Note that the return rate of LatheCity products is below 2%. Read our customer feedback at eBay. Other sizes available, for example ½”-20 for using a larger Jacobs drill chuck, or a center drill holder. Contact us, or look at eBay, most of the pieces are up for sale at eBay. Check out my other items! Be sure to add me to your favorites list! Uwe Burghaus (LatheCity) Fargo, North Dakota, USA ©, 2013, LatheCity International shipping: when purchasing our products customer accepts the following. International orders ship with regular USPS mail, no tracking, no insurance. We will not reimburse or replace lost orders. Customer covers all custom fees, broker fees, and taxes if applicable at all. You will NOT get a tracking number on international orders. We can provide the customs number and mailing costs receipt if required. Credit card companies may charge currency transfer fees which will be covered by the customer. Estimated costs, International 1st class mail, for a single tools: Canada $10.00 Western Europe $12.00 (e.g. Italy, Greece, Turkey, …) UK $12.00 Australia $20.00 Japan $20.00 If your destination is not in that list contact us. Other shipping options (with tracking & insurance) are available, but these would be very expensive. International priority mail does not have a tracking number. We charge up to $3.00 for handling on international orders. We charge a standard shipping rate on international orders which may be above the estimated rate. We will reimburse over paid shipping costs via PayPal if actual cost are lower by at least $2.00. (Example, shipping cost to Italy $11.45 + $3.00 handling, paid $25, reimbursed $10.55; or shipping to Canada $7.54 paid $8.00, no reimbursement.) Please note that PayPal will charge credit card fees for every transaction. We will not reimburse credit card fees (2-3%), but can mail a check if requested. Copyright © 2013 Uwe Burghaus, Fargo, North Dakota, USA LatheCity is a small business registered in North Dakota, USA – we are the manufacturer and not a retailer. Contact us via e-mail if required, rather than calling. We don’t have a secretary. We respond on e-mails typically within a few hours including weekends and holidays. Check out my other items! Be sure to add me to your favorites list! Condition: New, Country of Manufacture: United States, Brand: LatheCity, Model: Jacobs drill chuck adapter, MPN: LatheCity

PicClick Insights PicClick Exclusive
  •  Popularity - 0 views, 0 views per day, 1,645 days on eBay. 1 Sold, 0 Available.
  •  Price -
  •  Seller - Over 1,071 items sold. 0% negative feedback. Top-Rated Seller! Ships on time with tracking, 0 problems with past sales.
Similar Items