See Details on eBay Amazon Watch Contact

FSM-70R+ 12 Fujikura Fusion Splicer Super Fast !!-- USA MODEL We are an Authorized AFL Fujikura distributor

$12,950.00 Buy It Now 13d 0h, Click to see your shipping cost, 14-Day Returns, eBay Money Back Guarantee

Seller: opticaltest (342) 95.5%, Location: Cumberland Foreside, Maine, Ships to: Worldwide, Item: 380666689470 FSM-70R12 + Fujikura Fusion Splicer (Machine only, does not include cleaver, HJS or battery)Call for lowest price on Kit (Machine, hot jacket stripper, cleaver and battery) (Be careful of Unauthorized Asian units being black marketed and 'repaired' by unauthorized "we service anything" shops.) 2 YEAR AFL/Fujikura USA Factory Warranty !! WE ARE AN AUTHORIZED AFL FUJIKURA / NOYES DISTRIBUTOR (BEWARE OF UNAUTHORIZED 3RD PARTY RESELLERS, CALL AFL FOR VERIFICATION) AFL- FUJIKURA STATE-OF-THE-ART THIS IS THE USA MODEL AND CAN BE SERVICED AT THE AFL/FUJIKURA USA FACILITY...... if you are unsure if there is a difference in buying a non-USA model, call AFL and ask !!! Many Asian units have illegally replaced or modified firmware/ hardware that makes the unit a non-AFL machine, voiding the AFL warranty and right of repair. It does impacts the specifications/ performance , call AFL for details! Note: Many customers have notified AFL that they purchased a Fujikura Fusion Splicer from an unauthorized distributor resulting in no warranty or technical support. If you are in the process of purchasing a Fujikura Fusion Splicer in the United States, Canada, Central America and the Caribbean, please verify the company is an authorized AFL Telecommunications distributor. AFL Telecommunications constantly strives to provide high quality products and services to its valued customers in an effort to earn long-term trust and support. You should be aware that Fujikura brand fusion splicers are entering the marketplace through unauthorized sales channels. In many instances, these products have been modified to a point that they may not meet the intended performance specifications. AFL operates the only service center in the United States, Canada, Central America and the Caribbean that is authorized by Fujikura to repair its equipment, and AFL is the only service center with original manufacturer’s parts, and certified repair and calibration training. AFL does not provide warranty service or technical support for Fujikura brand fusion splicers purchased from any unauthorized distributors. (WE TAKE TRADE-INS. IF YOU HAVE ANY EQUIPMENT YOU NO LONGER USE, TAKE IT OFF THE DUSTY SHELF AND TURN IT INTO A CASH TRADE-IN) Fujikura 70R Fusion Splicer The Fujikura 70R is equipped with a precision, fixed v-groove for splicing single fibers or ribbon fiber up to 12 fibers. Incorporating the proven ruggedized features pioneered by Fujikura, the 70R has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. A new auto-start “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 40-second shrink time for 12-fiber ribbon. The result is a total splice process time of approximately 55 seconds! Ruggedness and durability are greatly enhanced by a mirror-less optical system and "severe-impact resistant" monitor. Battery capacity is now 110 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before. Features:Bluetooth wireless communicationAutomated and programmable wind protector Li-ion battery with 110 splices/shrinks per charge40-second automated tube heater Fully ruggedized for shock, dust and moistureOn-board training and support videosInternet software upgrades Multi-function transit case with integrated workstation PARAMETER VALUEmodel FSM-70R Fusion Splicer Applicable Fibers Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) Fiber Count Single, 2, 4, 5, 6, 8, 10, 12 Cladding Diameter 125 μm Coating Diameter Ribbon: 0.25 mm to 0.4 mm, Single: 250 μm and 900 μm Fiber Cleave Length 10 mm Typical Average Splice Loss 0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS; measured by cut-back method relevant to ITU-T and IEC standards Splicing Time Typical 15 seconds with standard single-mode fiber Arc Calibration Method Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available Splicing Modes 100 preset and user programmable modes Splice Loss Estimate Based upon dual camera cladding alignment data Storage of Splice Result Last 2000 splice results stored in the internal memory Fiber Display X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation Magnification 35X to 90X Viewing Method Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating Operating Condition 0 to 3,660 m above sea level, 0 to 95% RH, and -10 to 50°C respectively Mechanical Proof Test 1.96 to 2.25 N Tube Heater Built-in tube heater with 30 heating modes; auto-start function Tube Heating Time Typical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-15 seconds with Fujikura micro sleeves Protection Sleeve Length 60 mm, 40 mm, Micro Splice/Heat Cycles with Battery Typical 110 cycles with power save functions activated Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-13, 13.2V DC with BTR-08 battery Terminals USB 1.1 (USB-B type) for PC communication, Mini-DIN (6-pin) for hJS-02/03 and SH-8 tube heater Wind Protection Maximum wind velocity of 15m/s (34 mph) Dimensions 146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches) Weight 2.3 kg (5.1 lbs) with AC adapter; 2.5 kg (5.5 lbs) with batteryIncludes: ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), FH-50-12 Fiber Holder, USB Cable, Alcohol Dispenser, Screw Driver, Sleeve Loader, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap CALL FOR A COMPLETE PDF SPEC and VIDEO BY EMAIL WE ARE A VETERAN OWN BUSINESS Features: FIRST TIME CUSTOMERS ASK ABOUT OUR NEW CUSTOMER DISCOUNT! for a complete pdf spec sheet, send your request and reference this auction number. Rent or Lease, we take trade-ins too.IF YOU WANT TO PAY MORE FOR YOUR FIBER EQUIPMENT, THAT'S YOUR BUSINESSBUT, IF YOU WANT TO PAY LESS, THAT'S TAMGE'S BUSINESS !!! Powered by eBay Turbo Lister Condition: New, Type: Optical+Test+Equipment

PicClick Insights PicClick Exclusive
  •  Popularity - 7,175 views, 3.6 views per day, 1,967 days on eBay. Super high amount of views. 1 sold, 2 available.
  •  Price -
  •  Seller - 342+ items sold. 4.5% negative feedback. Good seller with good positive feedback and good amount of ratings.
Similar Items