400W Dental Flexible Denture Machine Dentistry Injection System Lab Equipment CE

Specification Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg Using Steps: 1 The function of the heater is to heat the ink cartridge at a temperature of 282-288 ° C for about 7 minutes 30 seconds - 11 minutes to melt the flexible denture material in the ink cartridge. 2 The function of the hot press is to inject molten material into a previously prepared flask. 3 The heater will beep when it is heated. Note Please read the product manual carefully before operating the machine. What's Included? 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1x Product Brochure

400W Dental Flexible Denture Machine Dentistry Injection System Lab Equipment CE Description Features: Voltage: AC 110V/60Hz Power: 400 watts Heating temperature: 282-288 ° C Pressurization time: 7 minutes 30 seconds - 11 minutes Packing size: 40*34*57cm Gross weight: 30kg The package includes: 1X heater 1X hot press 1X picking stick 1X small top bar 1X Big Top Bar 1X Type Box 1X box wrench 1X power cord 1Xproduct brochure De-ntal Flexible Denture Machine Lab Equipment Electric Hydraulic Press Dentistry Injection System 400W 110V 282-288 ° C

---

  Product Description:

★ Dental Flexible Denture Machine Is a 400w/110v Dental Laboratory Equipment for Making Flexible Removable Partial Dentures. .

★ the Denture Produced by the Invisible Denture Injection Molding Machine Has Almost No Waste Edge, and the Grinding Process Can Be Completed at One Time.

★the Denture Injection System Is Easy to Operate, Has a Long Service Life, Low Maintenance Cost, High Success Rate, and Dental Laboratory Equipment for Denture Injection System, Which Is Very Necessary for Dentists.

★ This Machine Is Produced According to International Standards. the Operation Is Simple, Time-saving, the Casting Success Rate Is High, and the Common Tooth Box Can Also Be Injection Molded.

★ the Denture Injection Unit Consists of a Heater and a Hot Press. Heaters: Temperature Control, Timers and Electrical Systems. Hot Presses: Frames, Cylinders, Heaters, Brackets and Flasks.

Features: Voltage: Ac 110v/60hz Power: 400 Watts Heating Temperature: 282-288 ° C Pressurization Time: 7 Minutes 30 Seconds - 11 Minutes Packing Size: 40*34*57cm Gross Weight: 30kg   The Package Includes: 1x Heater 1x Hot Press 1x Picking Stick 1x Small Top bar 1x Big Top bar 1x Type Box 1x Box Wrench 1x Power Cord 1xproduct Brochure

 

Steps:

1 the Function of the Heater Is to Heat the Ink Cartridge at a Temperature of 282-288 ° C for About 7 Minutes 30 Seconds - 11 Minutes to Melt the Flexible Denture Material in the Ink Cartridge.

2 the Function of the Hot Press Is to Inject Molten Material into a Previously Prepared Flask.

3 the Heater Will Beep When It Is Heated.

Note

Please Read the Product Manual Carefully Before Operating the Machine.

Statement

---

Statement (FDA, ARTG)

---

The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. If you have questions about legal obligations regarding sales of medical devices, you should consult with the FDA's Center for Devices and Radiological Health: https://www.fda.gov/cdrh/devadvice/ https://www.fda.gov/cdrh/industry/support/index.html Thank you for your cooperation. PaymentDelivery detailsTerms of salesAbout usContact usPayment   We accept ebay payment 。 Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility. Delivery details Shipping:   2-9 working days to: USA   Terms of sales

•  
• We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!

 

•  

About us Your satis faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects. a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package. b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item. c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid. Thank you. Contact us Business Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time) Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday. Please contact us with ebay message. Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time) Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday. Please contact us with ebay message. Please feel free to contact us if you have any questions.

√Service√	√Any problem, please contact the seller√
--Service--	Any problem, please contact the seller!
Note	not ship to Canarias
Brand	Unbranded
MPN	Does Not Apply
Bundle Listing	Yes
Voltage	AC 110V/60Hz
Power	400 watts
Heating temperature	282-288 ° C
Pressurization time	7 minutes 30 seconds - 11 minutes
Packing size	40*34*57cm
Gross weight	30kg
UPC	Does not apply
Type	Denture Injection Molding Machine
Intended Use/Discipline	Dentistry

• Condition: New
• √Service√: √Any problem, please contact the seller√
• --Service--: Any problem, please contact the seller!
• Note: not ship to Canarias
• Brand: Unbranded
• Bundle Listing: Yes
• Voltage: AC 110V/60Hz
• Power: 400 watts
• Heating temperature: 282-288 ° C
• Pressurization time: 7 minutes 30 seconds - 11 minutes
• Packing size: 40*34*57cm
• Gross weight: 30kg
• Type: Denture Injection Molding Machine
• Intended Use/Discipline: Dentistry

See More