JGY370 DC Geared Motor 6V~24V 6~210RPM All Metal Gear Turbine Worm High Torque

$9.79 Buy It Now, $2.80 Shipping, 60-Day Returns, eBay Money Back Guarantee
Seller: hk_mis11 ✉️ (55) 100%, Location: Shenzhen, GD, CN, Ships to: WORLDWIDE, Item: 374984600342 JGY370 DC Geared Motor 6V~24V 6~210RPM All Metal Gear Turbine Worm High Torque. 6RPM; 10RPM; 18RPM; 23RPM; 30RPM; 40RPM; 66RPM; 90RPM; 150RPM; 210RPM. DC Motor AC Motor Stepper Motor Model Aircraft Motor (Hollow Cup)Coreless Motor Servo Motor Solenoid Valve Water Pump/Air Pump Cooling Fan/Blower Related Accessories.
JGY370 DC Geared Motor 6V~24V 6~210RPM All Metal Gear Turbine Worm High Torque   UK Drills   Home About Us Feedback Contact Us Follow Us Store Categories Store Categories DC Motor AC Motor Stepper Motor Model Aircraft Motor (Hollow Cup)Coreless Motor Servo Motor Solenoid Valve Water Pump/Air Pump Cooling Fan/Blower Related Accessories Company Brand Honest Seller Item Description JGY370 DC Geared Motor 6V~24V 6~210RPM All Metal Gear Turbine Worm High Torque   ● Product Name: JGY370 DC Geared Motor ● Model: JGY-370 ● Power Supply Mode: DC ● Voltage: 6V, 12V, 24V 6V Motor Usage Range: 3V-9V (3V for 6V150RPM is 75RPM) 12V Motor Usage Range: 6V-18V 24V Motor Usage Range: 12V-30V ● Specification: 6RPM; 10RPM; 18RPM; 23RPM; 30RPM; 40RPM; 66RPM; 90RPM; 150RPM; 210RPM.

HIGH QUALITY TO BE TRUSTWORTHY: All Metal Gears Can Be Used in Conjunction with the Speed Controller to Control the Speed (Controllable Range 0-Selected No-load Speed), and Can Be Reversed in Both Positive and Negative Directions (by Changing the Positive and Negative Poles of the Motor Wiring Terminals to Switch Between Positive and Negative Directions or in Conjunction with Our Store's Speed Control Belt with a Positive and Reverse Speed Controller and a Positive and Reverse Rotation Switch). They Have a Power off Self-locking Function, and the Maximum Bearing Capacity of the Gear Is About 30kg. For Specific Parameters, Please Refer to the Size Chart in the Parameter Table Below. If You Have Any Questions or Need More Parameter Sizes, Please Contact Customer Service.

PRODUCT APPLICATION

Suitable for Electronic Locks, Range Hoods, Display Stands, Robots, Intelligent Devices, Barbecue Machines, Etc.

How to use the motor 1. Use of tolerance: pay attention to the use of voltage and current range, the use of the motor in the case specified in this standard, otherwise the life of the motor will be reduced. 2.Handling the motor: hold it gently and put it down, use the motor shell part as far as possible. 3. Motor wiring: red lead to the positive pole, black lead to the negative pole, if connected to the opposite direction of rotation of the motor. 4. Overload: as far as possible in the company's provisions of the load range of use, it is strictly prohibited motor blocking or close to the blocking state over a long period of time, otherwise the motor will burn out. 5. Motor storage: storage temperature: 0 ℃ -40 ℃, storage humidity: 15% -90% RH avoid placing in high temperature, high humidity and corrosive gases in the environment. 6. Motor operating temperature: 0 ℃ -70 ℃.

MotorPrecautions 1. When You Use the Motor, There Should Not Be Any Binding Objects Such As Adhesive to Flow into the Bearings Through the Rotating Shaft, Which May Affect the Operation of the Motor. 2. the Rotation of the Shaft May Have the Opposite Effect on the Life of the Motor, in Order to Prolong the Life of the Motor, Please Check Whether Your Loads Are in Accordance with the Regulations, and Do Not Overload or Hang Items on the End of the Shaft That May Hinder the Rotation. 3. Heavy Radial Loads That Are Made to Be Eccentric Can Be Detrimental to the Life of the Motor. 4.Do Not Store the Motor in High Temperature or Extreme Humidity, or in Corrosive Gas, As This Will Reduce the Effectiveness of the Motor. 5.Do Not Run the Motor in High Temperature and Humidity. 6. When Soldering the Positive and Negative Motor Terminals, Use a Soldering Iron with a Temperature of 340°C±40°C and a Heating Time of 3 Seconds or less, and Do Not Deform the Plastic, Allow Solder to Flow into the Motor, or Break the Ends of the Wires, As This Will Cause the Motor to Deteriorate. 7. Don't Let the Motor Shaft Get Stuck, When the Power Is Transmitted, It Will Make the Motor Overheat in a Short Time and Burn Its Accessories. 8. the Quality of the Motor Cannot Be Guaranteed If the Motor Encounters Any of the Things Mentioned in the Instruction Manual or If It Is Obvious That There Is a Fault on the Surface Due to a Lack of Skill on the Part of the Staff. 9. Supply the Specified Power and Make Sure That It Is Within the Range of Measurable Requirements. 10. When Installing Pulleys or Gears, Do Not Put an Excessive Amount of Weight on Them When Pressing Them in. 11. When Mounting the Motor, If the Screws Are Too Long, It May Cause Contact Between the Motor Itself and the Rotor, Which May Affect the Characteristics.

Dear Customer:Payment:Delivery DetailsAbout ItemAbout usDear Customer:

If You Need a Large Quantity or Other Quantity, We Can Send the Goods According to Your Requirements. Please Contact Us. Thank You Very Much.if You Need Other Sizes, We Can Offer Customization. Please Contact Our Customer Service for Details. Package Included: As per Your Choice!

There Are Many Types, Sizes and Colors of Products in Our Store, You Are Welcome to Buy Them

Payment: We Only Accept Paypal. It's Quick, Easy, and Safe. Payment Must Be Completed Within 7 Days. Please Note: S&H Does Not Include No Obligations, Taxes, or Other Import Charges. Please List Your Special Requests (Color, Packages, Etc.) in the Paypal Notes Section When You Make Payment. Delivery Details We Only Accept Your Ebay Address, Please Make Sure It Is 100% Correct. Conditions of Sale: If You Are Not Satisfied with the Item, Please Contact Us. We Will Offer Full Refunds to You When We Receive Your Returned Item. Any Problem, Please Feel Free to Contact Us. About Item For the Functional Products in Our Store, We Make Sure the Functions Are the Same As Description, But the Actual Color and Shape May Be a Little Different from the Pictures Due to the Technical Improvement and Manufacturing Variance. Please Consider This Before You Bid. About us

If You Are Satisfied with the Products, I Expect That You Can Give Us Positive Feedback. If You Have Any Problem or You Are Not Satisfied with It, Please Feel Free to Contact Us, We Will Reply You Within 24 Hours.

Contact Us: We Care About Our Valued Buyers, If You Have Any Questions Our Customer Service Representatives Will Be Very Happy to Help You. We Try Our Best to Answer Your Emails As Soon As Possible. However, Due to the High Number of Emails We Receive Every Day and the Time Zone Difference, We May Not Be Able to Reply to Your Emails Immediately. Please Allow 24 Business Hours for Us to Respond.


On Oct 19, 2023 at 19:24:46 PDT, seller added the following information:

  • Condition: New
  • Voltage: 6V
  • Rotating Speed: 6RPM
  • Units(pcs): 1
  • Brand: Unbranded
  • Current Type: DC
  • Nominal Rated Input Voltage: 6 V, 12 V, 24 V
  • Shaft Diameter: 6mm
  • Model: 4632-JGY370
  • Base RPM: 6~210RPM

PicClick Insights - JGY370 DC Geared Motor 6V~24V 6~210RPM All Metal Gear Turbine Worm High Torque PicClick Exclusive

  •  Popularity - 3 watchers, 0.0 new watchers per day, 159 days for sale on eBay. High amount watching. 1 sold, 10 available.
  •  Best Price -
  •  Seller - 55+ items sold. 0% negative feedback. Great seller with very good positive feedback and over 50 ratings.

People Also Loved PicClick Exclusive