Digital Multimeter Voltmeter Resistance Capacitance Temp Transistor Tester Meter

Feature:

• 1. Versatile digital multimeter:  Suitable for a variety of household and industrial use. Can be used for household outlets, fuses, batteries (including automotive), automotive circuit troubleshooting, charging systems, testing electronic equipment in automobiles, etc. Versatile measurement to meet your needs for multifunction.
• 2. High precision voltmeter:  Accurate measurement of data, DC current, DC voltage, resistance, AC voltage, transistor, diode on/off test, audible continuity test.
• 3. LCD screen digital display:  This electronic tester multimeter has a high quality 3 ½ digit display with a maximum display value of 1999.
• 4. Adjustable extension support frame:  The back has an extendable support frame to effectively support the digital voltmeter and facilitate standing operation.
• 5. Lightweight and easy to carry:  Comfortable and smooth lines, practical ergonomics make measurement easier and bring more convenience to travel
• 6. It is strictly forbidden to directly plug into the socket to measure current, which will cause damage to the meter.

Notes:      1、To avoid electrical shock hazard and/or damage of the instrument, do not measure voltages that might exceed 100V above earth ground.       2、Before the use of instrument, inspect test leads, connectors and probes for cracks, breaks, or crazes in the insulation.       3、Before attempting to open the case of the instrument, be sure to disconnect test leads from any energized circuits to avoid shock hazard.      4、When replacing the battery, Be careful to observe the polarity(Included battery).  Specification:

• DC Voltage: 200m-2-20-200-1000V ±0.5%
• AC Voltage: 200m-20-200-750V ±1.0%
• DC Current: 2m-20m-200m-20A ±1.8%
• AC Current: 2m-20m-200m-20A ±2.0%
• Resistance: 200-2k-20k-200k-2M-20M-200MΩ ±1.0%
• Capacitance: 20n-200n-2u-20uF-200uF ±4.0%
• Diode Test: Yes
• Triode Test: Yes
• On-off Measurement: Yes
• Battery( included): 2*AAA Battery
• Maximum display Count: 1999
• Test pen material: PVC/brass Cord length: 70cm

Introduction of Each Part of Appearance:

• 1. FUNCTION AND RANGE SWITCH
• This switch is used to select the function ano desired range as well as to turn on the instrument.To extend the life of this battery, the switch should be in the "OFF" position when the nstrument is not in use.
• 2. DISPLAY
• 3½ digit, 7 segment digital tube, 0.5" high LCD.
• Polarity: Automatic polarity display,
• 3. "Common" JACK
• Plug in connector for black (negative) test lead,common port.
• 4. "VQmA" JACK
• Plug in connector for red (Positive) test lead for all voltage and resistance and less than 200mA current measurements.
• 5. "20A" JACK
• Plug in connector to red (positive) test lead for current greater than 200mA measurement.
• TECHNNICAL SPECIFICATIONS
• Accuracy: ±a% of reading: ± N0 digits.
• Environmental temperature : 23℃±2℃.
• Relative Humidity: <75%.

Package Included:

• 1 x Digital multimeter
• 2 x AAA Battery
• 2 x Test Lines
• 1 x User Manual
• 1 x Packing Box 

• Condition: New
• Display:: 3½ digit LCD MAX 1999
• DC Voltage Range: 200m-2-20-200-1000V ±0.5%
• AC Current: 2m-20m-200m-20A ±2.0%
• Custom Bundle: No
• Feature 2:: Data Hold
• Maximum Display Value: 1999
• MPN: CM1013122OR
• Triode Test: Yes
• DC Current: 2m-20m-200m-20A ±1.8%
• Input Protection Features: HRC Fuse, Shunt Resistor
• Diode & Audible Continuity:: Diode testing 2.4V,1.5mA; Buzzer Sounds＜30±20Ω
• Measurement Category: CAT III
• Form Factor: Pocket
• Test/Measurement Functions: AC Current, AC Voltage, Capacitance, Continuity Test, DC Current, DC Voltage, Diode Test, Duty Cycle, Frequency (Hz), Inductance, Resistance, Transistor Test
• Capacitance Range: 20n-200n-2u-20uF-200uF ±4.0%
• AC Voltage Range: 200m-2-20-200-750V ±1.0%
• Features: Protection, Insulation, Auto Power Off, Auto-Ranging, Backlight, Battery Door Access, Clamp, Data Hold, Data Logging, Min-Max Value Mode, Over Range Protection, Plastic Probe Insulation, Silicone Probe Insulation, True RMS
• Resistance Range: 200-2k-20k-200k-2M-20M-200MΩ ±1.0%
• Battery:: 2*AAA battery(battery not included)
• Feature 1:: Low Battery Indication
• Modified Item: No
• Diode Test: Yes
• Brand: HTWON
• On-off Measurement: Yes
• Current Range: 2mA-20A ±(1.0%+2dgts)
• Type: Multimeter
• Model: DM9205A
• Display: Digital
• UPC: 786353656292

See More