Large Set of various Chemistry lab glassware and plasticware. All glassware made in USA, unless noted. Very good condition no chips or cracks unless noted-see photos.
100+ pieces included as shown:
Glassware:
1 - 250ml Beaker Pyrex
1-150ml Beaker Pyrex
1-100ml Beaker, unmarked
1-50ml Beaker Pyrex
1-50ml Beaker VWR
1-500ml flat bottom boiling flask Pyrex
1-50ml Distilling flask with long sidearm, Pyrex
6- Volumetric Flasks -(1-250ml, 1-200ml, 1-100ml, , 2-50ml, 1-10ml) -mix of Pyrex, Kimax, and Kontes, one Sibata- Taiwan, included 2 glass stoppers
6 - Erlenmeyer Flasks ( 2-500ml, 1-250ml, 2-125ml, 1-50ml ) Pyrex, Kimax, Fisher, one with ground glass neck
1- 250ml Biometer Flask Bellco (Looks like an Erlenmeyer with a side vessel) Used for remediation studies or CO2 generation, consumption -quite rare
1- Droptube Bellco, for above flask-its like a miniature addition funnel, used to allow gas transfer or add small quantities of reagent. Has glass stopcock
1-Chromatography Column with 250ml reservoir and teflon stopcock- label gone, but likely Chemglass or Ace. Can be used for chromatography studies, or a addition or separatory funnel. about 18 inches long, has female spherical joint at top.
1- large test tube? with side arm, has ground glass joint at top.
1- Crucible, with lid, Coors
10- Test tubes with threaded tops, included caps-mixed brands- Pyrex, Kimax, VWR, or Fisherbrand
5-Flint Glass Culture tubes with yellow label
4- lengths (approx 1 ft. each) of glass tubing for bending and experiments- includes 2 sizes
1- Pyrex Reagent bottle with ground glass neck and stopper. Guessing about 125ml size.
4- small amber bottles for chemical storage, have PP lined lids
5-three inch long thin capillary tubes, for melting point experiments
METAL:
1- Test tube gripper
PLASTIC (NEW):
4 - Perti Dishes
1-Chemical scoop.
10 - Dropping pipettes (eyedroppers) 5 short, and 5 long style.
1-length of rubber tubing approx 2ft long
1 - syringe, 50cc luer-lok
3-syringes 3cc luer lok
10 - syringes in pack 5cc
3 - volumetric pipettes 1ml in 1/100ths
2- volumetric pipette 10ml in 1/10ths
4 - 8oz or 200ml Graduated Measuring cups
PLASTIC (used):
10 - plastic test tubes
1-50ml graduated cylinder
1-Pinch clamp for pinching rubber tubing
The glassware was used, and I washed with warm soap and water, but you will need to clean according to your needs. Made in the USA, except for one or 2 pieces. Will be wrapped, packed in peanuts and double boxed ,for shipping. Please note that some of the plasticware maybe be within the peanuts-so check carefully when unpacking. All glassware is separately wrapped and I suggest unwrapping over a cushioned surface to prevent breakage if dropped.
I always try to ship within one day of receiving payment, However, I travel, and sometimes with little notice, so if you need in a hurry please contact me BEFORE YOU BID , to determine my shipping schedule.
Payment with instant payment only. . Ship by UPS or FedEx, you choose at checkout. Item is boxed 25x13x12 12lbs
Thanks for looking and please see my other auctions.
INV 240316-01