LAUNCH OBD2 Scanner CRP129E V2.0, 2024 Lifetime Free Online Update Scan Tool with 12 Reset ABS Bleeding/TPMS/Oil/EPB/SAS/BMS/Adblue/Headlamp/Throttle Reset, Injector Coding, Auto VIN, Battery Test【2024 UPGRADED ELITE VERSION of CRP123/CRP123E/CRP129E 】 LAUNCH scanner CRP129E V2.0 with 4 systems diagnostic, 12 reset service,features a larger 5 inch touchtable HD screen and keypad design for better operation, Android 8.1 OS, 6100mAh rechargeable battery, battery voltage test, auto VIN, full obd2 functions,DTC library,live data graphing, record & playback, and automatic generate diagnostic health report, printable via email shareing. One-Click WiFi Update makes you can use the newest software all time for free.

2024 New Version LAUNCH CRP129E V2.0 OBD2 Scanner + 4 System Diagnoses + 12 Reset Service Functions +FULL OBD2 Functions+ Lifetime F.ree Online Update

✔️Advanced Configure : Hardware and Functionality such as Fast Android 7.0 OS , 5 Inches Touch Screen , Keypad,  6100mAhA battery , 2G RAM+16G ROM , Lifetime Free WiFi Update , Auto VIN , One-Click Quick WiFi Update , the Launch scanner CRP129E V2.0 provides users with fast operating speed and smooth user experience. Keypad and Touchscreen 2-IN-1 offers you more convenience, you can work easily even wearing gloves in cold weather.

✔️What sets our CRP129E 2.0 apart from the CRP129X and CRP129E? >>>>> 1. CRP129E 2.0 has been upgraded from 8 special features to 12 special features, upgraded to Android 8.1 operating system, and increased memory capacity to 32GB, providing a faster diagnostic experience and greatly saving your valuable time. >>>>>> 2. The CRP129E 2.0 transitions from a single touchscreen interface to integrated touchscreen and keypad functionality, allowing mechanics to operate efficiently even when wearing gloves, resulting in increased flexibility and ease of use. >>>>>> 3. For an additional cost of just $12, you can upgrade to a cutting-edge diagnostic scanner for unprecedented value. With premium performance at your fingertips, why hesitate?

✔️4X Faster Process Chip : Compared to the CRP123 /CRP123E/CRP123I , LAUNCH scanner 129I utilizes a more advanced chip, resulting in a 50% increase in efficiency. and you can get the processing data in less than ten seconds!

✔️Multi-Systems Diagnostic Tool : CRP129E V2.0 code reader supports diagnosing Engine, ABS Airbag, SRS and Transmission systems for health check, read and clear car fault codes, and turn off warning lights. All in one obd2 scanner diagnostic tool CRP129E V2.0 also supports One-Click Generate Health Report, Diagnostic Report Share and Print, Online Feedback, Auto VIN & DTC Library Lookup, Google Search, View History, DTC Help & Repair Tips.

✔️✔️12+ Hot Reset Service Functions : Supports Oil Reset, Steering Angle Sensor Calibration, Electronic Parking Brake Reset, TPMS Reset, Throttle Adaptation, D.P.F Regeneration, Injector Coding and BMS Reset, ABS Bleeding, Adblue Reset, Afs Headlamp Reset,A.ir/Fuel Ratio Reset to meet your daily car maintenance needs.

✔️Full 10 OBD2 Tests : for vehicles that match 1996 OBDII/EOBD/JOBD/KOBD/CAN standards. Read fault code, clear fault code , live data ,read vehicle information ,O2 sensor test ,EVAP system test , On-board mintor test , DTC code lookup , IML fault indicator , view freeze frame, I/M readiness and add real-time graphing vehicles battery status...

✔️Lifetime Free Online WIFI Update : Provides lifetime free update, you can get the latest diagnostic software for free.. Free your wallet from costly renewals which may could be hundreds of bucks!

✔️4-IN-1 Graphic Live Data : can be merged in one graph for easy and intuitive car diagnosis. 1. Displays live data in text and 4-in-1 merged graphs for easy data review and analysis. 2. Record and Playback test results with one touch. 3. Prints out Diagnostic Report anytime with easy connection to a Windows PC.

✔️One Click WiFi Update:  Unlike those tedious upgrade steps that require a computer connection, the scanner CRP129E V2.0 supports one-click upgrade. Tap “Upgrade”, select all software, tap “Update” to start download software, and they will be installed automatically.

✔️10000+ DTC Lookup:  The built-in DTC library allows you to retrieve the definition of the diagnostic trouble code. Saves your effort in Google searching. *NOTE: AutoVIN feature does NOT work on all vehicles. You always can navigate your vehicle manually to perform diagnostics/services.

✔️Battery Test:  Allowing you monitor vehicle battery voltage automatically with reliable real-time graph data. It helps you to determine the battery's health status, get early warnings for possible battery and the charging system's problem.

✔️Wider Vehicle Coverage:  LAUNCH CRP129E V2.0 obd2 scanner supports diesel (12v only), 12V passenger car, pickup, and light-duty truck, SUV, gasoline, Minivans, vehicle from 1996-2024 models.

✔️11 Languages Supported:  English, French, Spanish, German, Russian, Italian, Polish, and Portuguese.Korea. Chinese. It is easy to use and It is convenient to generate local language diagnostic report. No matter your client's cultural background.

✔️Perfect After-Sales Service:  Designed for technician , mechanic,advance DIY, garage, car dealer, used car dealer, auto repair shop, automotive engineer, diagnostic tech, truck man, automobile tech, home mechanic, DIY beginner, weekend DIY, individual.

Note: Reach us via  cardiag-aftersales @ hotmail.com to check compatible before purchase.

LAUNCH CRP129E V2.0 OBD2 Scanner with 4 System Diagnoses Suitable for 99% of Cars

LAUNCH scan tool CRP129E V2.0 is a powerful and reliable 4 systems diagnostic tool. Supports deep inspection of the engine, ABS, SRS, and transmission systems of cars by reading DTCs, displaying live data, clearing DTCs, recording diagnostic data, and turning off MILs. A car hobbyist can also make some repair attempts with the help of this LAUNCH car code reader.

>>>> ✔️ENG System (Engine System)

LAUNCH CRP129E V2.0 obd2 scanner helps you read fault codes and shows the definition of DTC , clear the fault codes, and turn off the MIL (Engine Malfunction Indicator Light).The instantaneous change of real-time data information can quickly identify the problem of Engine components, which is helpful to find out the cause of engine system error before sending your vehicle to a repair shop, save more time and money.

>>>> ✔️AT System (Transmission System)

A uto code reader LAUNCH CRP129E V2.0 diagnostic scanner is an automatic Transmission service tool that supports read/clear fault codes, viewing live data, tell you the running status of the sensors, read the error and turning off the warning light, which is helpful to quickly and accurately locate faults and solve problems easily.

>>>> ✔️ABS System (Anti-lock Braking System)

The diagnostic tool LAUNCH CRP129E V2.0 is available for accessing to ABS system to view its Live Data Stream, and retrieving the fault codes, this LAUNCH scanner can troubleshoot the ABS issue with a visual inspection of all brake components that caused the warning light, and turn the light off.

>>>> ✔️SRS System (Supplemental Restraint System)

This LAUNCH Scanner CRP129E V2.0 supports Airbag System Diagnostic (SRS) for most domestic and imported vehicles. This scan tool can check the errors and clear the codes, view real-time live data to monitor the SRS running status, and solve security risks. Extend the service life of airbags and improve vehicle safety.

Read DTCs – knows what and where the problem is according to the DTC and its definition.

Clear DTCs – erases the DTCs and turns off the warning lights after code reading and certain repairs.

Version Information – reads the version information of system mode, VIN, software, and ECU.

Live Data Stream – displays valuable parameters to determine the specific problems accurately.

✔️The NEWEST VERSION of LAUNCH CRP123/CRP123E/CRP129E OBD2 Scanner with ENHANCED HARDWARE and MORE FUNCTIONS

✔️The NEWEST VERSION of LAUNCH CRP123/CRP123E/CRP129E OBD2 Scanner with ENHANCED HARDWARE and MORE FUNCTIONS

 

• When D.P.F Regeneration will be used？

 

1. The exhaust back pressure sensor is replaced. 2. The PM trap is removed or replaced. 3. The fuel additive nozzle is removed or replaced. 4. The catalytic oxidizer is removed or replaced. 5. The DPF regeneration MIL is on and maintenance is performed. 6. The DPF regeneration control module is replaced.

 

• When Injector Coding will be used？

 

1. Write injector actual code or rewrite code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity. 2. After the ECU or injector is replaced, injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection.

 

• When BMS Reset will be used?

 

1. Main battery is replaced. 2. Battery monitoring sensor is replaced.

 

• When SAS Reset will be used？ 1. After replacing the steering angle position sensor, steering mechanical parts (such as steering gearbox, steering column, end tie rod, steering knuckle), performing four-wheel alignment, or recovering the car body, use CRP129E V2.0 to reset the steering angle.
• When TPMS Reset will be used？ 1. After replacing tire sensors,reset tire pressure and turn off the tire pressure MIL.
• When Throttle Adaptation will be used？ 1.The ECU is replaced and the ECU does not yet store throttle working features. 2. The throttle assembly is replaced or the throttle is cleaned. 3. The intake pipe is replaced or removed. 4. After replacing the throttle assembly, you need to match the throttle.
• When Oil Reset will be used？ 1.If the service light is on, you will need to reset the drive mileage so that the service light turns off. 2. After changing engine oil or electric appliances that monitor oil life, you need to reset the service light.
• When EPB Reset will be used？ 1. The brake pad and brake pad wear sensor are replaced. 2.Diagnoses EPB caliper functionality, initializes the wear indicator if new pads are installed and deactivates or re-activates brake control system.
• When ABS Bleeding will be used？ ABS brake bleeding to get a firm brake pad after air exhaustion after repair ABS pump system.
• When Adblue Reset will be used？ After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset operation is required. 1. Find the AdBlue tank, usually under the hood or in the trunk of the vehicle. 2. Fill the tank with AdBlue until the warning light goes off. 3. Start the engine and let it run for a few minutes to allow the system to recognize the new AdBlue liquid level. 4.Shut down and restart the engine to check if the warning light has reset.
• When AFS Headlamp Reset will be used?  Initialize the adaptive headlamp system. AFS means Adaptive Front lighting System, it swivels either side, pressing that button means they stay pointing straight ahead and don't turn when you turn the steering wheel.
• When A.ir/Fuel Ratio Reset will be used？  Improve fuel economy!

 

Simplify Your Repairs with Our User-friendly Diagnostic Equipment

Full OBDII Test Modes  of LAUNCH CRP129E V2.0 obd2 scanner:

 

• Read Fault Codes : Show the detailed description of the Diagnostic Trouble Code (DTCs).
• Clear Fault Codes:  Turns off Check Engine Light (MIL), clears codes and resets monitor
• View Freeze Frame Data:  Check the certain vehicle conditions which are recorded by the on-board computer at the time the emission-related fault occurs.
• I/M Readiness Status:  Shows whether the various emissions-related systems on the vehicle are operating properly and are ready for inspection and maintenance testing.
• Read Live Data Stream:  Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
• Read Vehicle Information:  Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and CVN (Calibration verification number), etc.
• O2 Sensor Test:  Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from the vehicle's on-board computer.
• On-Board Monitor Test:  Retrieves and displays test results for emission-related Powertrain components and systems.
• Component Test:  Certain vehicle components can be actuated by commands sent from the scanner to test their operability.

 

CRP129E V2.0 can test obd2 10 modes for vehicles that match 1996 OBDII/EOBD/JOBD/KOBD/CAN standards.

4-IN-1 Multi-Graphs or Merge Graph-Clearly Displays Real-time Data in Text and Graph Form for Easy and Intuitive Diagnosis.

>>> 4-IN-1 Live Data Graphing :

LAUNCH CRP129E V2.0 scan tool 4-IN-1 real-time graphical data streams to help you view the instantaneous changes of the car's ENG/AT/ABS/SRS system. The detailed analysis can be enlarged. The live data can also be recorded, replayed and shared. It can provide insight into overall vehicle performance, and can also be used to guide vehicle repair.

 

• Live Data Stream Graphing:  4-IN-1 data streams can be merged into one chart to achieve simple and intuitive car diagnosis. It is supports two graphs (independent) or 4 PID's graphed (combined).
• Live Data Stream Recording:  The function is amazing, You can record the live data stream for up to 10, simultaneous, PID's. Once these have been recorded they can be played back in text format and/or graph format. Allows you to record the live data stream and view the data of a certain point in a targeted manner.
• Live Data Stream Playback:  After you have recorded the data for a period of time, if you want to view and analyze the data just recorded, you need to use data stream playback function to help you. Playback timeline can be scrolled, paused, viewed, etc. Then you can choose " Combine", " Report" and " Record".

 

>>> There are three types  of display modes available for data viewing, allowing you to view various types of parameters in the most suitable way.

Value  – This is the default mode which displays the parameters in texts and shows in list format.

Graph  – Displays the parameters in waveform graph

Combine  – This option is mostly used in graph merge status for data comparison. In this case, different items are marked in different colors. If the graph is more than one page, swipe the screen from the left to jump to the next page.

Take Control of Your Car's Maintenance with Our User-friendly and Comprehensive Diagnostic System.

>>>Real-time Battery Voltage Test:  CRP129E V2.0 has added real-time battery monitoring function, allowing you to automatically monitor vehicle battery voltage and obtain reliable real-time graphical data. It can help you determine the health status of the battery and obtain early warnings of possible battery and charging system issues.

>>>Diagnostic Report Share & Print:  LAUNCH CRP129E V2.0 will automatically generate a diagnostic report after the diagnostic work is completed. This report includes the vehicle VIN, brand/model, year, equipment information, and a detailed explanation of the inspection results. You can send the diagnostic report in PDF format via email to yourself or friends/customers, or print the diagnostic report by connecting the scanner to computer.

>>>One-Click Online Update:  One click Wifi Update is faster when connecting to WiFi. And the new version of the software can be compatible with more models, up to 2024 models. lifetime updates through Wi-Fi for more vehicle coverage and bug fixes.

>>>Auto Vin & Auto Scan:  The LAUNCH scanner CRP129E V2.0 is equipped with the latest automatic VIN scanning technology, which can quickly and automatically identify vehicle information, such as brand, model, and year.

>>>View Diagnostic History : Once a vehicle diagnosis is performed, LAUNCH OBD2 Scanner will record the every detail of the diagnostic process. The history viewing function provides quick access to the test vehicle, allowing you to restore the progress of the previous diagnosis without the need to re-diagnose.

>>>Online Feedback : It helps to record all issues in the vehicle system and supports sending feedback online for engineer assistance. This enables you to provide feedback on diagnostic issues to LAUNCH for effective troubleshooting.

>>>Google Code Search:  Code Search function allows you directly connect to Google.com to get more online information about the current DTCs like tech notes, code to diagnose, when is the code detected, descriptions, etc., which can greatly facilitate diagnostics and saves a lot of time for the repair.

>>>Built-in DTC Library:  Built-in Google "Code search" features, you can browse the google to find more solution of car's malfunction & Built-in DTC Lookup Library as your needs and preference.

>>>Mall Service:  The Mall module can help you gain more advanced features, providing unlimited possibilities for your CRP129E V2.0 in terms of functionality.

LAUNCH CRP129E V2.0 obd2 scanner for car is a very thorough tool and intuitive to use.

>>> LAUNCH CRP129E V2.0 Plug and Play, Easy to Use:

 

• Step1：Plug the CRP129E V2.0 diagnostic tool into the OBD2 port.
• Step2：Turn on the car.
• Step3：Access the diagnostic scanner to start diagnosis.

 

>>>Wide Vehicle Coverage : 85+ brands, 100000+ models, No IP restrictions.

 

• [American Cars] : Compatible with Buick, Cadillac, Chevrolet, Chrysler, Dodge, Ford, GMC, etc.
• [European Cars] : Compatible with Abarth, Alfa Romeo, Aston Martin, Bentley, BMW, Bugatti, Citroen, Dacia, Ferrari, Fiat, Jaguar, Land Rover, Lancia, Mini, Mercedes Benz, Peugeot, Porsche, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volvo, VW, etc.
• [Asian Cars] : Compatible with Acura, Daewoo, Daihatsu, Honda, Hyundai, KIA, Lexus, Mazda, Mitsubishi, Subaru, Suzuki, Toyota, etc.
• [Australian Cars] : Compatible with Holden, AU Ford etc.

 

>>>What's in the Box?

 

• CRP129E V2.0 OBD2 Scanner*1
• OBD II Diagnostic Cable*1
• DC 5V Charging Cable*1
• User Manual*1 & Quick Start Guide*1
• Carrying bag*1

• Condition: New other (see details)
• Condition: NEW!√10000+ sold √Lifetime Free Update √Authorized Dealer
• New added reset 7: Injector Coding
• New added reset 8: BMS Service
• Language 1: English,French ,German ,Spanish,Portuguese
• Size: 228*125*34.5mm
• Language 2: Russian,Japanese, Italian,Traditional Chinese,Korea
• UPC: 724190795408
• Similar Model 2: Launch CRP123X V2.0 CRP123E V2.0 CRP123
• New added reset 9: AFS Headlamp Reset
• Similar Model 3: Launch CRP909 CRP909E CRP909X
• Similar Model 1: Launch CRP129E V2.0 CRP129X V2.0
• 🔥Hot Functions 2: 12 RESET SERVICES
• 🔥Hot Functions 3: BATTERY VOLTAGE TEST
• 🔥Hot Functions 1: MULTI-SYSTEMS DIAGNOSIS
• 🔥Hot Functions 6: Diagnostic Report & Feedback
• 🔥Hot Functions 7: One-Click Online Update
• 🔥Hot Functions 4: AUTOVIN SCAN
• Battery: 6100mAh Lithium Battery
• 🔥Hot Functions 5: FULL OBDII FUNCTIONS & GRAPHIC LIVE DATA
• OBD Interface: OBDII, CAN, EOBD, OBD
• Features: Backlit Display, Built-In Battery, Check Engine Light Shut Off, Color Display, Erases Codes, Freeze Frame Displays, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly
• Reset Functions 6: D-P-F Regeneration
• Reset Functions 5: Throttle Adaptation (Calibrate Throttle Control System)
• Reset Functions 4: TPMS Reset (Tire Pressure Monitoring System)
• Reset Functions 3: E-P-B Reset(Electric Parking Brake)
• Warranty: 3 Year
• Reset Functions 2: SAS Reset(Steering Angle Set Straight)
• OS: Android 8.1
• Reset Functions 1: Oil Reset
• Vehicle Type: Passenger Vehicle
• Manufacturer Part Number: CRP129E CRP909X CRP909E CRP123E CRP919E CRP919E BT
• Brand: LAUNCH
• Supported System: ABS, SAS, SRS, DPF, EPB, TPMS, Engine, AT, Airbag, Transmission, Anti-lock Brake System, Supplemental Restraint System
• New added reset 11: A/F Reset
• New added reset 10: Adblue Reset(Diesel Engine Exhaust Gas Filter)
• New added reset 12: ABS Bleeding
• Connectivity: OBDII Cable
• Free Update: Lifetime
• Display: 5" Touch Screen, 720P

See More