CNC Kit 4 Axis Standard Breakout Board & Stepper Drivers Nema 23, Nema 34

Descriptions 1*5 Axis Standard Breakout Board + 4*EMA2-080D72 Microstep Motor Drivers Why Purchase CNC Products in our store?

10+ Years Rich Experience	High Quality Product	Professional After-Sale Service
We have been fulfilling CNC Motion Control needs for over 10 years to support any project you may have.	Stepper motors and drivers from ENGMATE™ are with high quality for stable and durable usage.	The professional technical support and excellent after-sales service are backed up by a loyal and experienced team.

5 Axis Standard Breakout Board The breakout board in this kit has been upgraded to the intelligent, professional and industrial-level interface board set by re-designing the PCB board, embedding intelligent memory chip (professional version) and upgrading the external manual control tools (control pad and display panel) . This set has two types of versions: one is standard version and the other is the professional version . Compared to standard version, professional version mainly has two more functions. One is the "computer G-code recording function", and the other is the "manual programing function". For more information about these functions, please check our professional version. The stepper driver board controller in kit is a high performance microstepping driver adopting of 32-bit DSP, pure sine wave subdivision technology. With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the market. This kit is suitable for driving 2-phase and 4-phase Nema 23, Nema 34 hybrid stepping motors with a 2.4A-7.2A current.

• • High performance, cost-effective
• • Parallel port communication
• • Equipped with the display panel and control pad for manually control the stepper motor
• • Automatically finish Tool-settings on X, Y, Z Axis via the control pad , without the support of the computer
• • Display panel can real-time trail the running path of G-Code on the computer or input by the control pad, and then completely and synchronously display the changing of MAXIMUM FOUR axis' (X, Y, Z A axis etc.) values on its screen, it is completely synchronous with the values' changing on the FOUR coordinates of Mach
• • 2 ways to get power , 5V DC power supply or USB port to get power from PC directly
• • Compatible with all the 2 phase, 3 phase and 4 phase microstep drivers in the market
• • 2-stage signal processing , smooth signal transmission, powerful anti-jamming
• • With Relay output control interface , available to control the spindle motor, air pump, water pump, etc.
• • 5 Types of input control in manual control interface, to set Limit, Estop, Midpoint-Setting, Cutter-presetting/Tool-Setting etc.
• • Compatible with the Mach2, Mach3(Default Software), LinuxCNC(EMC2), KCAM4 CNC Software , etc.
• • Automatic circuit protections function when the wirings between the breakout board and microstep drivers are incorrect

Digital Hybrid Microstepping Driver (EMA2-080D72) This ENGMATE™ digital hybrid stepper driver is a high performance Microstep Motor Driver adopting 32-bit DSP, pure sine wave subdivision technology . With this technology and the self-adjustment technology (self-adjust current control parameters) for different motors, the drive motors can run with less noise, lower heating, smoother movement and provide big torque at higher speed than most of the drivers in the market. It is suitable for driving 2-phase and 4-phase hybrid stepping motors, the Nema 23, Nema 34 stepper motor with a 2.4A-7.2A current will be suitable.

• • Extra-low motor noise offers excellent quietness
• • Supply voltage from 24-80V DC or 20-60V AC
• • Output current programmable, with 8 stalls output current setting , from 2.4A-7.2A (Peak)
• • Adoption of 32-bit DSP, pure sine wave subdivision technology
• • Low-vibration and low temperature rising.
• • Microstep resolutions programmable, with 15 stalls microstep subdivision setting
• • Automatic half-current reduction as long as switching off SW4 when motors stop.
• • Internal optical isolation, pulse input frequency up to 200KHz
• • Support PUL/DIR mode
• • Short-voltage, over-voltage, over-current and short-circuit protection, protect the motors, driver from being damaged
• • Suitable for 2-phase and 4-phase Hybrid stepper motors

Common-cathode Connection Applications

Specifications Matching Stepper Motors

Model NO.	Min Motor Size	Max Motor Size	Recommended Supply Voltage	Recommended ENGMATE Stepper Motors
EMA2-040D15	NEMA 8	NEMA 17	24V DC	EMA112-4506S4, EMA162-3805S4
EMA2-040D22	NEMA 8	NEMA 17	24V DC	EMA082-4208S4, EMA142-4520S4
EMA2-050D42	NEMA 17	NEMA 23	24V/36V DC	EMA172-6015S4, EMA232-5615S4
EMA2-050D56	NEMA 23	NEMA 34	36V DC	EMA232-7630S4, EMA232-11235S4
EMA2-070D56	NEMA 23	NEMA 34	48V DC	EMA242-8840S4, EMA342-7842S4
EMA2-080D72	NEMA 23	NEMA 34	60V DC	EMA342-10050S4, EMA342-15662S4
EMA2-080A72	NEMA 34	NEMA 42	80V DC	EMA422-15065S4
EMA2-220A80	NEMA 34	NEMA 52	110V/220V AC	EMA422-20180S4

Electrical Properties of 5Axis Breakout Board(ambient temperature Tj = 25°C)
Input Voltage	5V DC via power adapter or directly get power from PC via USB port
Version Type	Standard Version
Drive Type	Pulse + Direction + Enable Signal Control
Suitable Microstep Driver	2 Phase, 3 Phase, 4 Phase Microstep Driver (EMA2-050D42/ EMA2-070D56/ EMA2-080D72/ EMA2-220A80 etc.)
Net Weight	170g (Breakout Board + Display Panel)
Dimension	110*110*25mm
EMA2-080D72 Stepper Driver
Model NO.	EMA2-080D72
Input Voltage	24-80V DC or 20-60V AC
Output Current	2.4A-7.2A (Peak)
Pulse Input Frequency	200KHz
Cooling Method	Natural Cooling or Fan Forced cooling
Environment	Avoid dust, oil fog, corrosive gas
Ambient Temperature	0°C~50°C (32°F~122°F)
Operating Temperature	70°C (158°F) Max
Storage Temperature	-20°C~65°C (-4°F~149°F)
Humidity	40%RH-90%RH
Dimension (WxHxD)	150×99×51mm
Weight	600g
Suitable Motor	Nema 23, Nema 34

Content

Services

Estimated Delivery Time
Country/Region	Standard (Business Days)	Express (Business Days)
UK, EU (27 Countries)	6 - 12	4 - 6
Other European Countries	6 - 15	4 - 7
USA, Canada, Mexico	5 - 10	3 - 5
Australia, New Zealand, South Asia, East Asia	7 - 12	3 - 5
South America, Other Countries/ Regions	15 - 25	varying

Remarks

• • Usually, we dispatch your order within ONE to Three WORKING DAYs upon receipt of full payment when stock lasts.
• • Above estimated delivery time is not guaranteed. However, 95%+ parcels are delivered within the reference time.
• • For fixed-time delivery or any special needs , please do contact and confirm with us BEFORE placing order.

Duties-and-Taxes

• • Under EU VAT rules, all goods sold to EU are subject to VAT at local rate.
• • Starting 1 July 2021, eBay will collect VAT on certain orders delivered to EU addresses, on behalf of customers local tax authorities. When you see VAT is included/collected on invoice after cleared payment, you can just wait for the parcel to arrive at your door. Estimated delivery time is 4-12 business days, varies between destination countries and delivery services chosen.
• • For orders above a certian value, eBay will not collect VAT at checkout, buyers are required to declare and pay tax at point of import.
• To facilitate smooth customs clearance, we work with world's leading international couriers (i.e. FedEx, DHL) to ship your parcel via commercial grade express delivery service. The courier will properly handle customs duty and tax declaration when importing the parcel. You don't need to contact or visit customs/tax office in person. All you need to do is to pay your tax fees on delivery. Parcels will be delivered within 4-6 business days to most EU addresses under such arrangement.

Satisfaction Guaranteed 30 Days Money Back Guarantee

• If you are not satisfied with the item purchased from us. Please contact us in writing (e.g. e-mail, eBay message) within 30 days of receipt of goods for return & refund guidance.

Free Replacement

• If you receive a not-as-described (e.g. defective, incorrect, part missing) item, please contact us upon receipt of the item. We will arrange a replacement as soon as the case is confirmed.

12 Months Supplier Warranty

• We provide ONE YEAR warranty on this product from date of purchase. If your item has any warranty issues, please contact us for a satisfying solution.

Requirements

• • All qualified return/replacement must be guided by us. We may not accept your return without communication in advance.
• • Any customs fee, handling charges, postage and insurance incurred in return/replacement are on customer's cost.

Agreement : By placing an order, you acknowledge that you have accepted the terms and conditions of sale. You are welcome to contact us with any questions. Image Gallery Descriptions Specifications What's In Terms & Condition

• Condition: New
• Brand: Generic
• MPN: 10104040117100600
• Model: 4 axis CNC EMA2-080D72 Standard Controller Kit
• Application: Support Software Mach3, Linuxcnc, KCam4, etc
• Modification Description: Suitable for Nema23, 34 Stepper Motors with 2.4-7.2A
• Input Voltage: DC 24-80V or AC 20-60V
• Number Of Axes: 4

See More