Hart Scientific(Fluke) 9102 Hdrc Dry-Well Block Calibrator - Hart's new line of portable dry-wells is incredible. They're the smallest, lightest and most portable dry-wells in the world. For work in the temperature range of -10 C to 122 C, Hart's Model 9102 HDRC dry-well is another first in the industry.
REED Instruments R2810 Thermocouple Calibrator - Model:R2810 | Order No:R2810. Model: R2810. Order No: R2810. What's included with the REED R2810. REED R2810 Specifications. Thermocouple adapter. Product Certifications CE. Replaceable Test Leads Yes.
Altek Thermocouple Calibrator 3302T-K Series 22 Tc Source - ALTEK THERMOCOUPLE CALIBRATOR 3302T-K SERIES 22 TC SOURCE. Pretty sure it's never been hooked up, but I am listing as used. 30 day warranty to guarantee functional. Very good condition.
KAYE LTR-140 Dry Block Calibrator - Then slow to reach lower temperatures: -37.42C after 20 min., -37.86C after 30 min. Heating: 25C to 140C (@ 13C ambient temperature) in 15 min. Accuracy: +/- 0.2C. Initially fast: 25C to -33C in 10 min.
Isotech 2 Chl True Temperature Indicator Model Tti-10 Probe Case Instructions - IT HAS HAD VERY LITTLE IF ANY USE. THE PROTECTIVE PLASTIC IS STILL ON THE DISPLAY SCREEN. IT WAS CHECKED AND HAD THE INTERIOR BATTERY REPLACED. THE USB CABLE IS NOT INCLUDED. I am not an expert and describe these things as I perceive them.
Fluke 5720A Multifunction Calibrator - All readouts appear in plain language rather than in cryptic error codes. Or you can print the results directly. Front panel instructions prompt the operator to make connections and inputs each step of the way.
Fluke 724 Temperature Calibrator Fluke724 - The Fluke 724 even handles high-speed pulsed RTD circuits and provides loop power. Built for the masters of temperature. Now you can carry one tool to expertly test all the temperature sensors and transmitters in your plant.
Benchtop Oscilloscope Portable Oscilloscope with 8M Memory Depth - Oscilloscope channels 2CH 2CH 2CH 2CH. Maximum record length Single channel maximum 8M. Vertical gain accuracy In "normal" or "average" acquisition mode, the accuracy of 10V/div to 10mV/div is ±3%;.
Fluke 6102 Micro Bath/ Calibration Bath - Damaged Display - This unit seems to work fine, however, the display/buttons are damaged. The screen works fine but the buttons seem to get stuck from time to time. I did get all the buttons to work with a bit of patience.
Covidien Genius 2 Checker/Calibrator REF 303097 with CD - We have lots of inventory not yet listed! BUY IT NOW! We may have what you are looking for! The unit is in good used condition with scrapes and scuffs and other signs of use.
Ametek ATC320B Jofra temperature calibrator power supply confirmedUSED - Temperature:33-320degC (91-608degF). Accuracy (with STS Reference Sensor) +0.07degC / +0.13degF. Syncronization relay output 3,5mm mini jack. Storage temperature range -20-50°C / -4-122°F. Temperature units °C / °F / K.
SBIR Infrared Target Projector Blackbody Target Wheel (#3791) - We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is atta.
Kendall Covidien Genius 2 Checker/Calibrator *Missing Some Parts* Powers ON - Manufacturer: Covidien. Product may be incomplete or have parts that are missing. Item was successfully powered on. Scratches and scuff marks on surrounding area of item. The sale of this item may be subject to regulation by the US Food and Drug Administration, State, and local regulatory agencies.
Fluke Calibration Hart 7102 Temperature Micro Bath Wet Oil –5C to 125C 7102-156 - Bottle Fluke 5011 Mineral Oil. Wherever you go with your Micro-Bath, you can count on its performance. Each model is stable to ±0.03 °C or better, depending on the fluid you use. Don’t be fooled by competitors who pour oil into a dry-well and call it a bath.
Hart Scientific 9122 DryWell (50C-700C) - Used Hart Scientific 9122 DryWell (50C-700C) in decent shape and works as it should any questions ask check out my other auctions
Altek 422 Universal Thermocouple Calibrator BR - THIS ITEM IS NEW,NEVER ONCE USED. IT HAS BEEN TESTED TO PROVE FUNCTION. FACTORY WARRANTY MAY NOT APPLY. SOURCES/READS 14 T/C TYPES: J/K/T/E/R/S/B/N/C/G/C/P/L/U/MV.
Fluke networks SIMPLI FIBER PRO - Fluke networks SIMPLI FIBER PROThis is used item and it is in good condition. You will get what is listed in the photos.
Ametek Ptc-660 Jofra Temperature Calibration 33°C To 660°C - Winngo is a green outlet for manufacturers with surplus products. We do not buy direct from the manufacturers or from authorized dealers. The serial numbers in the pictures are covered to prevent mischief by hackers or others that want to cause harm.
Ametek ATC320B Jofra temperature calibrator power supply confirmed - Temperature:33-320degC (91-608degF). Accuracy (with STS Reference Sensor) +0.07degC / +0.13degF. Syncronisation relay output 3,5 mm mini jack. Storage temperature range -20-50°C / -4-122°F. Temperature units °C / °F / K.
Guildline 9540 Digital PRT Temperature Readout –180°C to +240°C - Automatic power-up self test diagnostic indicates circuit malfunctions for both analog and digital circuits. The front panel sticker is peeling off, there is a hole in the top of the casing. All pictures are of the actual unit.
Kaye Instruments K140 Ice Point Temperature Reference 0°C - All pictures are of the actual unit. Ending Soon. Power Quality Analyzers. Power Quality Analyzer. Power Systems and Substation. New products typically carry a 1 Year Warranty. These rules vary from country to country, check with the import rules of your country or state.
PIE 322-OB Thermocouple Calibrators - Type: Hand Held, Measure Inputs: Yes, Sour - Brass screws for T/C wires plus mini T/C socket. Easy-to-Read Display - Turn on the backlight to read in dark areas of the plant. NIST certificate. Photos are greatly appreciated! If your item appears defective, a call to the manufacturer may solve your issue.
Druck Dry Block Temperature Calibrator TC650 - GE Druck Dry Block TC650 GE Druck DryTC650-0-K. Generates temperatures from room temperature to 491°F (255°C). Uses °C working temperature unit. Light weight and robust for field use. Excellent set point stability of 0.05°C.
DT-9881M 6CH Particle Counter PM2.5 PM10 IR Air Temperature 5 in1 Meter - Air temperature and humidity, Dewpoint & Wet bulb temperature. 8:1 Distance to Spot size. Basic Accuracy: ±1.5% of reading. 0 to 50oC/32 to 122oF; Basic Accuracy:±0.5oC/1oF. Auto Power Off. 0 to 100%RH; Basic Accuracy:±2.5%RH(20%~80%RH).
DT-9880 3 in 1 Particle Counter Temperature Measure 2.8 inch TFT Color - 1.2.8" TFT 320x240 pixels Color LCD display. 2.8" TFT 320x240 pixels Color LCD display. Air temperature and humidity, Dewpoint & Wet bulb temperature. Wet Bulb Temp. Count Modes. MicroSD (MAX. Mass Concentration Channel. ).
Dry Well Temperature Calibrator. High Temp Complete System With PRT. - Dry Well Temperature Calibrator. Comes with PRT as a complete calibration system. I purchased new from the factory, enclosed it in a custom foam pelican case and it never left the calibration lab. Unit is functional and comes with the following:High temp complete calibrator2 drywell inserts1 power cord1 matching PRT1 Pelican foam case. This is a great unit for any calibration lab. New units are $7,033.00 currently.
Omega Omni-Cal Portable Temperature Calibrator & Simulator Omni-Al-4A-110(Abq14) - August 2022. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
PIE 525B Automated Thermocouple & RTD Calibrator - Trouble shoot sensor connections and find broken wires or corroded connections. Trouble shoot sensor connections and find broken wires with patented technology. Connect your two, three or four wire RTDs and the PIE 525B automatically detects the connections.
ISOTECH TTI-10, 2ch Precision Thermometer with one reference probe. - ISOTECH T100 Series Reference PRT Probe There is no need to calculate coefficients or data, simply enter the reference probe temperature or temperatures, and the TTI-10 does the work for you. Probe is new.
Fluke 724 Temperature Calibrator - Built for the masters of temperature. Market Leader with new products. We may not have all the answers, but we'll do our best to get you an answer. Our call center is available for expert advice. Knowledgeable Sales Staff.
General Resistance Prime Tech RTD-100 Resistance Temperature Simulator .01% accy - The RTD-100 provides an absolute accuracy of ±0.01% over its entire resistance range. The unique shunt decade design (Waidner-Wolf) reduces these errors to a level of insignificance. The usable resistance range of 10.000 to 1111.10 Ω is ideally suited for use with DIN PT-100, PT-100 ANSI, PT-50 and NI-120 systems.
Omega Cl3512A Types J,J,T,E Thermometer Calibrator (Dm18) - We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Fluke 714 Thermocouple Calibrator (AP1093288) - Fluke 714 Thermocouple Calibrator (AP1093288). Works great used for surveying furnaces. Does not come with the flex stand. Good condition.
REED INSTRUMENTS BX-500 Infrared Temperature Calibrator, 932°F (500°C) - Infrared Temperature Calibrator, 41 Degrees to 95 Degrees F, Target Emissivity 0.95 in, Display Type Dual LED, Target Size 2.28 in, Temperature Stability Below 212 Degrees F (100 Degrees C): +/-0.2 Degrees F (0.1 Degrees C); 212 to 392 Degrees F (100 to 200 Degrees C):+/-0.4 Degrees F; (0.2 Degrees C)392 to 932 Degrees F (200 to 500 Degrees C):+/-0.8 Degrees F (0.4 Degrees C), Heating Time 30 min, Cooling Time 30 min, Calibration Certificate Included No, Includes Power Cord.
Altek 222A Thermocouple Calibrator. - NO OTHER ACCESSORIES ARE INCLUDED. "you will get what you see in the picture". Over 70KG we do only Airport to Airport.
Ametek Jofra Model 650 Se Temperature Calibrator. - NO OTHER ACCESSORIES ARE INCLUDED. ONLY THE ITEM SHOWN IN THE PICTURE. "you will get what you see in the picture". Over 70KG we do only Airport to Airport.
ISOTECH F150 Precision RTD Calibration Reference Thermometer Calibrator # - The top line of the words on the screen has a little out of range (see the details of the photos above). Battery operation plus built-in data logging for "go anywhere" applications. The manual is free downloadable online.
Omega Engineering Inc. TRC 340B Ice Point Cell Calibration - Make Supersized seem small. The photos provided are of the actual item. You will only receive what is actually shown in the photos. Therefore, we are not familiar with all the parts or accessories that would be included from the manufacturer.
ILX Lightwave LDT5525 Temperature Controller - Model: LDT5525. Make: ILX Lightwave. Wide Temperature Range of–99°C to 199°C. Operational with most Thermistors and IC Temperature Sensors. Item Specifics/Condition. Typical Drift less than ±0.004°C.
Signature Hardware 32" or 36" Wall Mounted Range Hood 77 cm 4 speed 600 cfm - The 32" or 36 Velo Stainless Steel Wall-Mount Range Hood has the look desired for a modern kitchen update. Its slotted, flat-faced design adds character to truly set it apart. Includes a 600 CFM blower to quickly clear your kitchen of unwanted air pollution.
DT-9881M 6CH Particle Counter PM2.5 PM10 IR Air Temperature 5 in1 Meter # - Air temperature and humidity, Dewpoint & Wet bulb temperature. Auto Power Off. 8:1 Distance to Spot size. Basic Accuracy: ±1.5% of reading. 0 to 50oC/32 to 122oF; Basic Accuracy:±0.5oC/1oF. 0 to 100%RH; Basic Accuracy:±2.5%RH(20%~80%RH).
DT-9880 3 in 1 Particle Counter Temperature Measure 2.8 inch TFT Color # - 1.2.8" TFT 320x240 pixels Color LCD display. 2.8" TFT 320x240 pixels Color LCD display. Air temperature and humidity, Dewpoint & Wet bulb temperature. Wet Bulb Temp. Add to Favourites. Count Modes. Why Buy From Us.
Santa Barbara Infrared SBIR 920G Blackbody Controller 2006G - Powers up and displays as shown. Shows Error Codes 15,95, which may be due to no blackbody radiator connected. Unable to test further. Blackbody radiator not included. Power Cord.
New UNI-T UT308H Non-contact Infrared Thermometer (NO Battery) - New UNI-T UT308H Non-contact Infrared Thermometer Features: - FDA Clearance - Non-contact - Accuracy: ±0.2℃ - Response time: 250ms - Data hold - Test distance: 1-5cm - High temperature alarm .
Sika Temperatur - Block Calibrator Tp17650M - TYPE : TP17650M. MAKER : SIKA, GERMANY. CONDITION : USED GOOD WORKING CONDITION. [Check photos - You get what you see in photos].
Fluke Hart Scientific Transcat 23635T - Unit is in good cosmetic condition,With ambient temperature 25C i was able to get -3CPossibly need calibration of internal thermometer Aluminum insert is made by me, if you need custom inserts, i can fabricate them
Pie 520B Thermocouple Calibrator (Qq4) - NOTE All drives must to be connected to power for at least 4 hours prior to operation. If this action is not taken, it can ruin the drive. Be sure to add us to your favorites list !
Autonics TC4S-24R Temperature Controllers Standard Type New 1PCS ✦KD - New Arrival. Best Price and Good Quality. The item in the actual use of the process of quality problems. RTD: DPt100Ω, Cu50Ω. Input specification : Thermocouple: K(CA), J(IC), L(IC). Size : DIN W48×H48mm.
Autonics TC4S-14R Temperature Controllers Standard Type New 1PCS ✦KD - New Arrival. Best Price and Good Quality. The item in the actual use of the process of quality problems. Input specification : Thermocouple: K(CA), J(IC), L(IC). Add to Favourites. Size : DIN W48×H48mm.
CEM BX-500 Portable Infrared Handheld Calibrators - Am 15.07.21 hat der Verkäufer die folgenden Angaben hinzugefügt Der Gegenstand wird während des Transports beschädigt;. Vielen Dank. Das Standardpaket enthält keine Batterien. Hoffentlich können Sie sie in Ihrem örtlichen Geschäft oder Supermarkt kaufen.
CEM BX-350 Portable Infrared Handheld Calibrators - Am 15.07.21 hat der Verkäufer die folgenden Angaben hinzugefügt Der Gegenstand wird während des Transports beschädigt;. Vielen Dank. Das Standardpaket enthält keine Batterien. Hoffentlich können Sie sie in Ihrem örtlichen Geschäft oder Supermarkt kaufen.
Dry Block Temperature Calibrator Range 300-1200C 5.7''TFTLCD Touch Screen AC220V - The first worldwide touching operation, simple and fast to use. With load short circuit, load switch, sensor protection and other functions. Horizontal temperature and vertical temperature field;. The ambient temperature range: 0~50℃(32-122℉);.
Dry Block Temperature Calibrator Range -30C-150C 5.7''TFTLCD Touch Screen AC220V - The first worldwide touching operation, simple and fast to use. With load short circuit, load switch, sensor protection and other functions. Horizontal temperature and vertical temperature field;. The ambient temperature range: 0~50℃(32-122℉);.
Vimex Norway Temperature Calibrator 230V Ac 50 C-600C - V 100% Original & Genuine Product and in good working condition unless specified. Bank Wire Transfer Accepted on large orders. Do let us know us for instructions.
Jofra pressure calibrator kit - [not included in price]. ref no:11641. made in italy. made in denmark. q- con corp. jd frsa/a105n. b1630001/2 pgk. u.s pat des 270.912.
Autonics TC4S-24R Temperature Controllers Standard Type New 1PCS # - New Arrival. The item in the actual use of the process of quality problems. Size : DIN W48×H48mm. We also have a high-standard team, qualified by authorized organizations to ensure products are of the highest quality.
Autonics TC4S-14R Temperature Controllers Standard Type New 1PCS # - New Arrival. The item in the actual use of the process of quality problems. Size : DIN W48×H48mm. We also have a high-standard team, qualified by authorized organizations to ensure products are of the highest quality.
Extech Sound Calibrator 407744 - Output signal 94dB Output signal frequency 1KHz sine wave Compatible microphone 0.5” and 1” microphone power supply two (2) 9V batteries.
Omega OMNI-CAL-8A-110 Thermocouple/Temperature Calibrator - Calibrator is a working pull. Unit was pulled from a working environment and is guaranteed functional. Unit is in fair cosmetic condition with scuffs, scratches and blemishes from previous use and handling. Unit comes as shown, and only includes pieces shown in photos. Unit is on hand and ready to ship. Please let us know of any questions that you may have. .
Precision Scientific Group Model 41132-11 Constant Temperature Bath Working Pull - YOU ARE BUYING A USED BUT IN GOOD WORKING ORDER PRECISION SCIENTIFIC GROUP MODEL 41132-11 CONSTANT TEMPERATURE BATH. THIS BATH WAS HOOKED TO POWER AND WORKING WHEN I REMOVED IT FROM A LOCAL LAB. DUE TO SIZE AND WEIGHT THIS ITEM MUST GO FREIGHT.
Precision Scientific Group Model 41164 Constant Temperature Bath Working Pull - YOU ARE BUYING A USED BUT IN GOOD WORKING ORDER PRECISION SCIENTIFIC GROUP MODEL 41164 CONSTANT TEMPERATURE BATH. THIS BATH WAS HOOKED TO POWER AND WORKING WHEN I REMOVED IT FROM A LOCAL LAB. DUE TO SIZE AND WEIGHT THIS ITEM MUST GO FREIGHT OR LOCAL PICK UP IN BELLEVILLE, MI 48111.
PIE 422 Multiple Thermocouple Type Calibrator for 14 Types, mV/0.1° - Secondary display of compensated millivolt setting and cold junction temperature. Easily change thermocouple types & scale. Model No: 422. Source and read 14 T/C types plus mV. J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) & P (Platinel); -13.000 to 80.000 mV.
Lufkin 75' Gauging Tape 1/2" Blade C1291SF590N BR - Model: C1291SF590N. Manufacturer: Lufkin. Our quality is second to none; we are A2LA accredited to ISO 17025. Our A2LA audits include compliance with ANSI/NCSL Z-540, ISO-10012-1, and Mil Std 454662A.
^^ Biddle Versa-Cal Digital Thermocouple / Millivolt Calibrator - DECEMBER 2019. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
^^ Kaye Uniform Temperature Reference (#2) - We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
^^ Kaye Uniform Temperature Reference (#1) - We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
LR-Cal LTC 200-F Portable Temperature Calibration Micro Bath +30°C to +225°C - High temperature stability up to ±0.01°C (±0.02°F). Temperature Range: +30°C. Lower temperature uniformity of ±0.05°C (±0.09°F). New products typically carry a 1 Year Warranty. These rules vary from country to country, check with the import rules of your country or state.
LR-Cal LTC 100-F Portable Temperature Calibration Micro Bath -35°C to +165°C - High temperature stability up to ±0.01°C (±0.02°F). Temperature Range: -35°C. Lower temperature uniformity of ±0.05°C (±0.09°F). New products typically carry a 1 Year Warranty. These rules vary from country to country, check with the import rules of your country or state.
LR-Cal PULSAR-35Cu-2I Dry Block Temperature Calibrator +20°C to +600°C - Temperature range +20.+600°C (at +20°C ambient temperature). -Temperature range +20°C. +600°C, Accuracy ±0.3°C, Stability ±0.05°C. New products typically carry a 1 Year Warranty. KEEP IN TOUCH! Thermocouple type K/N/R/S, Range 0.1300°C, Accuracy ±1°C.
LR-Cal PULSAR-35Cu Dry Block Temperature Calibrator +20°C to +600°C - Temperature range +20.+600°C (at +20°C ambient temperature). -Temperature range +20°C. +600°C, Accuracy ±0.3°C, Stability ±0.05°C. New products typically carry a 1 Year Warranty. KEEP IN TOUCH! These rules vary from country to country, check with the import rules of your country or state.
LR-Cal SOLAR Dry Block Temperature Calibrator +200°C to +1100°C Accuracy ±3°C - Power Quality Analyzers. -Temperature range +200°C. +1100°C, Accuracy ±3°C, Stability ±0.3°C. Power Quality Analyzer. Power Systems and Substation. This feature allows checking also of very short probes, without heating the connecting head or the handgrip.
LR-Cal PYROS-650 Compact Dry Block Temperature Calibrator +35°C to +650°C DNV - The self contained unit is very compact, portable and light weight. Compact and light weight. -Temperature range +30°C. +650°C, Accuracy ±0.5°C, Stability ±0.3°C. Temperature range +35°C. Several different block inserts with custom drillings available.
LR-Cal PYROS-375 Compact Dry Block Temperature Calibrator +30°C to +375°C DNV - The self contained unit is very compact, portable and light weight. Compact and light weight. -Temperature range +30°C. +375°C, Accuracy ±0.35°C, Stability ±0.1°C. Temperature range +30°C. Several different block inserts with different drillings available.
LR-Cal PYROS 140-1L Compact Dry Block Temperature Calibrator -24°C to +140°C - The self contained unit is very compact, portable and light weight. Compact and light weight. Temperature range -24°C. +140°C, Accuracy ±0.25°C, Stability ±0.05°C. Temperature range -24.+140°C. Several different block inserts with different drillings available.
LR-Cal PYROS 140-2L Compact Dry Block Temperature Calibrator -24°C to +140°C - (With two blocks ) is especially designed for field applications, robust and able to maintain high accuracy and stability in severe conditions such as offshore rigs and on board of vessels. The self contained unit is very compact, portable and light weight.
Unitor AS - K1 - 501 Compatibility Test Kit - The Unitor Oil Compatibility Tester is possibly the most useful and underrated tool available for testing fuel oils. IMI- UP2 CA 001 UNITOR. Part no - AS - K1 - 501. The favorable attributes of our organization have enables us to successfully cater to the international markets.
Dry Block Temperature Calibrator Range -20C-150C 5.7''TFTLCD Touch Screen AC220V - The first worldwide touching operation, simple and fast to use. With load short circuit, load switch, sensor protection and other functions. Horizontal temperature and vertical temperature field;. The ambient temperature range: 0~50℃(32-122℉);.
TRANSMATION 1064 Temperature Calibrator & Thermometer, GUARANTEED CALIBRATED - 1 x Modified Transmation 1064. SALE IS FOR THE TRANSMATION 1064 ONLY;. for job-site temperature readings. J : -200'C to 1200'C or -350'F to 2190'F. of front panel switches. Power is provided by a single 9V alkaline battery with a life of 1 month typical and 48-hour continuous operation.
Dry Block Temperature Calibrator Range 50C-650C 5.7'' TFTLCD Touch Screen AC220V - The first worldwide touching operation, simple and fast to use. With load short circuit, load switch, sensor protection and other functions. Horizontal temperature and vertical temperature field;. The ambient temperature range: 0~50℃(32-122℉);.
Fluke Calibration 9140-A-156 Field Dry-Well Temperature Calibrator - The 9140-A-156 is small enough to use in the field, and accurate enough to use in the lab. For use with Model 9140. The LED front panel continuously shows the current well temperature. Hole quantities and sizes: 1 Hole, 1.6 mm (1/16 in.).
Fluke 714B Temperature Calibrator, 17 Thermocouple Types/Millivolts - Model No: 714B. Our Model No: 714B. Linear ramp and 25% step auto ramp based on 0% and 100% settings. 1 - User Manual. 1 - Quick Reference Guide. 1 - Magnet Strap (TPAK). 4 - AA Batteries. 1 - TC Cap for TC Hole.
Fluke 724 Temperature Calibrator - It even handles high-speed pulsed RTD circuits and provides loop power. Now you can carry one tool to test all temperature sensors and transmitters in your plant. Model No: 724. Our Model No: 724. Backlight lets you work in poor light.
Reed Thermometer and Calibrator with Software, TC-920(Discontinued), Used - Has back stand and all necessary wires and cords. Type K Thermocouple. Our intention is not deceive anyone. We describe the positives along with the negatives. We try to give you as much information as possible and a direct link to the manufacturer if possible.
Ametek ATC320B 320degC Temperature Calibrator - Temperature:33-320degC (91-608degF). Storage temperature range -20-50°C / -4-122°F. Temperature units °C / °F / K. If you have any carrier account, We can use it. RS232C cable,Sensor(525824-08),Tube.
Honeywell RM7890A-1015 Flame Safety Burner Control USED - Check-Out Later If you do not choose to Check-Out now, you will be notified by eBay via e-mail that you are the winning bidder. We will automatically send you an e-mail within three hours of an auction closing.
Honeywell T775B1026 Temperature Controller ! AS IS ! - After winning an item in auction or completing a Buy It Now purchase, you have two check-out options:Check-Out Now! Due to the multiple quantities available, you may not receive the item pictured in the ad above.
Honeywell Q7800A-1005 Universal Sub-base USED - After winning an item in auction or completing a Buy It Now purchase, you have two check-out options:Check-Out Now! Due to the multiple quantities available, you may not receive the item pictured in the ad above.
REED VC14: Temperature Calibrator - The VC14 includes both RTD and T/C Capability at a lower price. Auto-offset cold-end temperature. All NEW products are covered under the manufacturer’s warranty. Local pick up is not available.
MS7222 THERMOCOUPLE CALIBRATOR Resistance Temperature Detector - MASTECH MS7222 RTDCALIBRATOR compared with FLUKE 712. MS7222 RTD Calibrator is tool for calibrating RTD (Resistance Temperature Detector) transmitters, including the most pulsed transmitters.
MS7222 THERMOCOUPLE CALIBRATOR new with 3 yrs warranty - • Operable with seven types of RTD. Battery: Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V. Weight: Approx. 350g (including battery). Pt10/Pt50/Pt100/Pt200/Pt500/Pt1000(385) Pt100(JIS). Accuracy 0.1Ω to 1Ω.
Mastech MS7220 Professional Thermocouple Simulator Calibrator Meter - MASTECH MS7220 THERMOCOUPLE CALIBRATOR compared with FLUKE 714. MS7220 Thermocouple Calibrator is a precise source and measurement tool for calibrating thermocouple instruments through a thermocouple mini jack.
Mastech MS7220 Professional Thermocouple Simulator Calibrator Meter - Range -200 to 1800°C, depending on type -10 to75mV. Battery: Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V. Size: 190mm × 89mm × 42mm. Weight: Approx. 350g (including battery). Note: 8 TC types; J K T E N R S B per NIST 175 and ITS-90.