P4100 Universal 100:1 High Probe For Oscilloscopes For Rigol Atten Owon - P4100 Universal 100:1 High Probe For Oscilloscopes For Rigol Atten OwonDescription:Universal 100:1 High ProbeProbe for OscilloscopesInput resistance of 100 megohmsInput capacitance of 6 pFCompensation : 10 pF - 35 pFBandwidth: 100 MHzRise Time: 3.5ns operating : 1000V for + ACPPAbout Products:colour:blackMaterial:ABSsize:Cable length : 1.1 for Package Contents:1* screwdriver8* marked multi-color ribbon2 * Tip positioning sleeve1* spring1* User Manualnote:Only the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real The measurement allowed error is +/- 1-3cm.
Tektronix TPP0500B Voltage Probe - Designed for use with Tektronix MDO3000, MDO4000B, MSO/DPO4000B and MSO/DPO5000B Series oscilloscopes, this probes provides up to 500 MHz of analog bandwidth with less than 3.9 pF of capacitive loading.
Tektronix P6134C Passive Voltage Probe, 400MHz, 10X - - C7 - Certified Pre-Owned. · Zero defects. · Software test results are available. · Repaired with OEM original parts. · All functions tested and verified working through software tests. F6 = Like New (Appendix C - Test and Repair).
*Tc* Tektronix P6201 Fet Probe 010-6201-00 (Rfg30) - No accessories or power cords. See pictures for more details. This powers up, but it is labeled not working correctly. SOLD AS IS FOR PARTS OR REPAIR! AUGUST 2023.
Fluke 80K-40 High Voltage Probe - Intended for low energy applications. Input Resistance 1000 MΩ. Division Ratio 1000: 1 (1000X attenuator). 0 kV to <20 kV and >35 kV to 40 kV: ±2%. Accuracy DC 20 kV to 35 kV: ±1% at 68 to 86°F (20 to 30°C); add 1% at 50°F (10°C).
Megger MRCT - Relay and Current Transformer Tester - The MRCT automatically calculates ratio errors, saturation curves, and knee points. - Integrated single phase relay test system. - General purpose substation secondary circuit testing with 300V & 60A generators.
Tektronix P6015 HV probe in case - Tektronix P6015 HV probe in case. Great Condition. Lightly Use. Fluid about over Half of Can. ???emailortext818-3141658.
^^Tektronix P6150 9Ghz Low Impedance Probe Kit (Hxd81) - No accessories including standard power cord/cable. AUGUST 2023. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Tektronix P5205 100MHz High Voltage Differential Probe. Used Surplus - This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the sale. This item is to be used for its intended purpose.
Micsig DP10013 Differential High Voltage Probe, 1300V 100Mhz 3.5Ns Rise Time 50X - More portable while Oscilloscope have USB interface. Designed for professionals and experts alike, this probe works with most oscilloscopes. But now, hobbies, students and professionals can afford one of two differential models produced by Micsig.
Tektronix P5100A With Accessories - New 500Mhz High Voltage Passive Probe - This lot is for oneTektronix P5100A with Accessories - New. DC to 500MHz. 2500V Peak, 1000V CATII. 100X with Readout Coding. This unit will arrive in the condition shown. A signed credit card authorization form is required for all orders paid with credit card.
Keysight N2790A High-Voltage Differential Probe 100 Mhz For X-Series 3000 4000 - Keysight InfiniiVision 3000 X-Series, 4000 X-Series. Keysight InfiniiVision 5000, 6000 (except for 100 MHz) and 7000 Series with software version 5.26.0001 or higher. Keysight Infiniium S-Series. Keysight Infiniium V-Series, Z-Series, 90000 X-Series, and 90000 Q-Series with N5449A adapter.
Universal 100:1 High Probe for Oscilloscopes Oscilloscope Clip Probe - Universal 100:1 High Probe for Oscilloscopes Oscilloscope Clip ProbeDescription:Universal 100:1 High ProbeProbe for OscilloscopesInput resistance of 100 megohmsInput capacitance of 6 pFCompensation : 10 pF - 35 pFBandwidth: 100 MHzRise Time: 3.5ns operating : 1000V for + ACPPAbout Products:colour:blackMaterial:ABSsize:Cable length : 1.1 for Package Contents:1* screwdriver8* marked multi-color ribbon2 * Tip positioning sleeve1* spring1* User Manualnote:Only the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real . The measurement allowed error is +/- 1-3cm.
Upgraded High Oscilloscope Probe P4100 2000V 100MHz 100:1 Easy Operation - Upgraded High Oscilloscope Probe P4100 2000V 100MHz 100:1 Easy OperationDescription:Universal 100:1 High ProbeProbe for OscilloscopesInput resistance of 100 megohmsInput capacitance of 6 pFCompensation : 10 pF - 35 pFBandwidth: 100 MHzRise Time: 3.5ns operating : 1000V for + ACPPAbout Products:colour:blackMaterial:ABSsize:Cable length : 1.1 for Package Contents:1* screwdriver8* marked multi-color ribbon2 * Tip positioning sleeve1* spring1* User Manualnote:Only the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real . The measurement allowed error is +/- 1-3cm.
THDP0200 Tektronix oscilloscope sub probe brand new FedEx or DHL - Hello, we will mark the product's new and old status on the product title. I hope everyone can understand each other. We will reply you promptly after we see the news. We are willing to provide you with good service, professional technology and excellent products.
TDP1500 Tektronix Low Pressure Differential Probe NEW FedEx or DHL - Hello, we will mark the product's new and old status on the product title. I hope everyone can understand each other. We will reply you promptly after we see the news. We are willing to provide you with good service, professional technology and excellent products.
HDE VW-20H V-Watch Personal Volt Detector,2400VAC - HDE VW-20H. V-Watch Personal Volt Detector,2400VAC. Grainger reserves the right to accept or reject any order. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
HDE PT-5000B Proof Tester,For Voltmeter,9V Battery - HDE PT-5000B. Proof Tester. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Diversion contrary to U.S. law is prohibited. Grainger reserves the right to accept or reject any order.
Micsig DP10013 Differential High Voltage Probe, 1300V 100Mhz 3.5Ns Rise Time 50X - More portable while Oscilloscope have USB interface. Item model number Micsig DP10013. Designed for professionals and experts alike, this probe works with most oscilloscopes. But now, hobbies, students and professionals can afford one of two differential models produced by Micsig.
TEKTRONIX P6015 DC-75MHz 13kV / 20kV HIGH VOLTAGE PROBE **LOOK** (REF.: Y) - Com for further assistance. The P6015 has a compensating circuit at the scope end of the cable with multiple adjustable RC constants. TEKTRONIX P6015. TEKTRONIX P6015 Features;. Input impedance. With dielectric filling: 20 kV DC or RMS to 100 kHz, pulse up to 40 kV (10%, < 0.1s).
B&K High voltage probe HV-30 - B&K Precision high voltage probe HV-30 30Kv DC. Sold as is, No returns!! Not tested.
Micsig DP10013 Differential High Voltage Probe, 1300V 100Mhz 3.5Ns Rise Time 50X - More portable while Oscilloscope have USB interface. Designed for professionals and experts alike, this probe works with most oscilloscopes. But now, hobbies, students and professionals can afford one of two differential models produced by Micsig.
Hioki 9270 AC 20A 10Hz-50KHz Current Probe with Amplifier Tested Working - Frequency response: 1.0% between 10Hz to 30KHz, 2.5% between 5Hz to 50KHz. Phase Characteristic: Less than 0.5 between 10Hz to 20kHz, Less than 1.0" between 5Hz to 50KHz. With the 9270, do not apply more than 100 A at frequencies greater than 10kHz to prevent overheating.
New HANTEK T3100 100MHz Oscilloscope High Voltage Probe 100: 1 Passive Probe - HT308 Hantek COP Extension Cord Coil-on-Plug Ignition Systems Test Accessories. 5Pcs Hantek HT307 Acupuncture Back Test Probe Pins Screw Auto Diagnostic Test. Hantek HT321 18pcs/lot mini grabber SMD IC test hook clip jumper probe 2 colors.
Hantek T3100 Digital High Voltage Oscilloscope Probe X100 100MHz 2500V - Hantek HT201 20:1 Passive Attenuator 300V Max For Pico Hantek & Others. HANTEK HT321 18 pcs mini grabber SMD IC test hook clip jumper probe for test. Hantek HT311 Adapter BNC to Banana Plug Connector for Oscilloscope Accessory.
Hantek T3100 High-Voltage x100 Probe for Oscilloscope Multimeter - Hantek HT321 18pcs mini grabber SMD IC hook clip jumper probe Oscilloscope test. Hantek HT201 20:1 Signal Passive Attenuator 10MHZ Bandwidth For Oscilloscope New. HT25 HANTEK Secondary Ignition Capacitive Auto Pickup Probe.
High Voltage Probe 40,000 Volts Max DC, 28,000 Volts Max AC (50/60 Hz) - 28,000 volts max AC (50/60 Hz). Input Impedance. 1,000MΩ input impedance. Input impedance: 1000MΩ. 40,000 volts max DC. Note: For 10MΩ input impedance DMM (Accuracy < 0.5%) only. Accuracy DC: ±1% to 20KV, ±2% to 40KV.
Tektronix TAP1500 Active Probe NEW - Specifically designed for use and direct connection to the TekVPI™ probe interface used on Tektronix' new DPO7000 and DPO4000 Series Oscilloscopes, the TAP1500. ≥1.5 GHz Probe Bandwidth. Connects Directly to DPO7000 and DPO4000 Series Oscilloscopes Using the New TekVPI™ Probe Interface.
HDE PRX-500 Proximity Tester,120VAC to 500kV - Proximity Tester,120VAC to 500kV. HDE PRX-500. Rugged and durable housing is sealed to resist water penetration. Grainger reserves the right to accept or reject any order. Power adapters and other modifications may be necessary for proper operation in other countries.
Yokogawa Model 700925 15MHz 1000V Differential Probe, Powers On, Last Cal 2016 - Minor wear to labeling may be visible. No signs of wear or alteration. No missing parts. Once you have successfully reached the checkout page, simply follow the instructions from there. May have light scratches or other minor blemishes from normal wear.
Fluke 80k-40 High Voltage Probe - Fluke Test Probe. Have not personally tested the device. Listing it for parts for this reason, it is sold as is. No returns. The physical condition of the item is very good.
Pomona Electronics model 2900A High Voltage Test Probe 0-30 kVDC - Very nice working condition one latch on carring case is broke. Pomona Electronics. Used: An item that has been used previously. See all condition definitionsopens in a new window or tab. Modified Item.
^^ LeCroy P9010 M12 X10 Oscilloscope Passive Probe (AUL27) - No accessories or power cords. See pictures for more details. This powers up, but it is labeled not working correctly. SOLD AS IS FOR PARTS OR REPAIR! We do not have power cords to provide unless they are attached to the item or unless stated that they are provided.
Tektronix P6139B Passive Probes, One Set Of Two (Vdh47) - No accessories or power cords. S ee pictures for more details. See pictures for more details. This powers up, but it is labeled not working correctly. SOLD AS IS FOR PARTS OR REPAIR! We do not have power cords to provide unless they are attached to the item or unless stated that they are provided.
YOKOGAWA 701926 DC-50MHz High Voltage Differential Probe. Used Surplus - This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the sale. This item is to be used for its intended purpose.
Tektronix P6015A - Tektronix P6015A HV Probe. FOR USE WITH: TEKTRONIX DIGITAL OSCILLOSCOPES. So all of this stuff was taken very well care of. He knew what he was doing for sure. You can also check us out on the internet.
Heath High Voltage Probe tested Working Needs Cable (C9B1) - Usefull Link. If this happens there is nothing we can do. Read First. TOP CATEGORIES. If the photos show an open box with the parts laid out, it is not new or sealed. You are only getting what is shown in the photos, nothing else, nothing more, just what you see, If you don't see it you are not getting it.
BK Precision PR-28 High Voltage Multiplier Probe - We do not have the power cord so we have not tested for power. Upon checkout, there there is a handling fee depending on the size of the item. We are not experts in any given field. We want you to be confident when purchasing.
Tektronix-P5210A - Power Device Evaluation. Power Converter Design and Service. CRT Display Design. Electronic Ballast Design. Motor Drive Design. Switchable Bandwidth Limit. Switchable Attenuation. Safety Certified.
KEITHLEY High Voltage PROBE Model # 1600 A __ Very good Cond. - (Good Cond. -> The Item is in good cond. Model 1600A. ))). OTE: (( A )) >>>> This item is intended for professional ( audio / electronics service techs ) ONLY ! __one pc__. __ Tested __.
Tektronix THDP0100 6000V 100MHz High Voltage Differential Probe - TESTED WORKING - Looking for a reliable and high-performing high voltage differential probe? This Tektronix THDP0100 probe might just be what you need. With a peak voltage rating of up to 1300 volts and a frequency range of 100 MHz, this probe is perfect for industrial, testing, and inspection applications.Not only is this probe from a trusted brand, but it has also been thoroughly tested and guaranteed to be in working condition. It is perfect for anyone looking for a reliable high voltage probe that can deliver accurate and consistent results. Don't miss out on this opportunity to get your hands on this top-of-the-line Tektronix THDP0100 probe. All sale final no return as is
Tektronix P5050B 10X 500 Mhz Passive Voltage Probe - Overstock Sale - The P5050B probes are high impedance, passive probes that are designed for use with Tektronix ground-referenced oscilloscopes, including the DPO/MSO/TDS 3000/4000/5000/7000 series oscilloscopes. Input impedance at the probe tip : 10 MΩ, 11 pF.
Fluke 80K-40 High Voltage Probe - Local pick up is not available. We do not accept P.O. BOXES. Photos are greatly appreciated! If your item appears defective, a call to the manufacturer may solve your issue.
Fluke Mp1-3R/1B Magnetic Voltage Probes - & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
TEKTRONIX P5102 TEST PROBE 10x 100MHz High Voltage OSCILLOSCOPE (IPB98) - No accessories including standard power cord/cable. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Vintage Mueller Electric Co. Electric Test Probe No. 62 - Vintage Mueller Electric Co. Electric Test Probe No. 62. Condition Is Used But Good Shape Does Not Look To Used It Is Nice And Clean Be Sure To See Pictures As They Are Most Of The Description 100% Guaranteed Check Out All Of Our Vintage Listings We Consider All Offers We Ship Same Or Next Day
Tektronix P6015A Probe High Voltage 75MHz, 20KV, 1000X. NOS Surplus - Shows signs of storage wear. We cannot possibly describe every detail of this item and what is in the pictures is included in the sale. This item is to be used for its intended purpose. We did our diligence cleaning this item, but this item can still use a good wipe upon receipt.
HIOKI 9322 DC-10MHz 2000V differential probe - Normal operation HIOKI 9322 DC-10MHz 2000V differential probe This product is a second-hand product whose operation has been confirmed.
1pair 1M/3.3ft Dual 4mm Banana Male Plug Silicone Test Cable M/M Red + Black - 4mm Banana plug and 4mm Banana Jack. - High Quality silicone 1.0M(3.28ft) cable with copper center. Quantity: 2pcs(1 Red+1 Black). - Color: RED + BLACK. - We hope you enjoy using our item. Reminder: Be sure to use your product as directed;.
Pomona 1000V Probe (set of 2) - This leads are designed for Fluke, H-P, Tektronix and Wavetek DMM’s with a safety of sheathed banana jack. Probe body incorporates two step mould process. First step is polypropylene (PVC) for probe rigidity.
Pomona 1000V Probe - This leads are designed for Fluke, H-P, Tektronix and Wavetek DMM’s with a safety of sheathed banana jack. Probe body incorporates two step mould process. First step is polypropylene (PVC) for probe rigidity.
Rohde & Schwartz NRP-Z11 Universal Power Sensor 10 MHz – 8 GHz - Rohde & Schwartz. 10 MHz - 8 GHz frequency range. 10 MHz – 8 GHz. Universal Power Sensor. BRL Test is corporate friendly. We understand the traditional acquisition and capital approval process. 200 pW - 200 mW power.
B&K PRECISION PR-28A / PR28A 40 KV High Voltage Probe for DMM (BRAND NEW) - For sale Brand new B&K PRECISION PR-28A / PR28A 40 KV High Voltage Probe. This probe is designed to be used with digital multi meter. It is rated for 40 KVDC or 28 KVAC. The probe is brand new in original packaging with manual and two extra tips (one like hock and second is plate)
Tektronix TCA-SMA Probe Adapter NEW - The Tektronix TCA-SMA is a probe adapter. The high-speed TCA-SMA and N-type adapters allow a more direct connection to the signal under test requiring N or SMA connections without losing performance by adding other external conversion adapters.
Tektronix P6316 Logic Probe NEW - Input impedance. One, 16-channel digital probe. Maximum nondestructive input signal to probe: ±40 V.
Fluke Fluke-80K-40 High Voltage Probe - & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
Hantek HT8050 high voltage isolated probe - Model Number HT8050. Imput Capacitance Single-ended to ground?. Imput Impedance Single-ended to ground?. Probe Body 120 55 24?. Length of Output Cable About 90cm. Length of Input Cable About 60cm. Machinery Specification.
Tektronix P2221 200 MHz, 1X/10X Passive Voltage Probe, Comp. Range 10 to 15 pF - Tektronix P2221 200 MHz, 1X/10X Passive Voltage Probe, Comp. Range 10 to 15 pF. The P2221 Passive 1x/10x Voltage Probe from Tektronix is a 200MHz passive voltage probes that permits the selection of 1x or 10x attenuation using a switch located on the probe head. This solution is well suited for use in relative low-frequency measurements, low-frequency computer and telecom measurements, power supplies, and low-frequency amplifiers. This model is compatible with MSO2000 and DPO2000 Series oscilloscopes.This unit offers 1x/10x attenuationIt supports bandwidth up to 200MHzIt is 3.28' (1.5m) in lengthThis unit is compliant with the following standards: UL3111-1, CSA1010.1, EN61010-1, EN61010-2-031, and IEC61010-2-031
Preamble Instruments 100X 92 MEG 2.4 pF 400V XC 350 Differential Probe - This item is to be installed and maintained by qualified individuals. We claim no expertise in the use of this item. We accept no responsibility on the correct/incorrect application or installation of this item.
NEC Avio 1539 Event Floating Voltage Probe 4CH - However, I learned that there are many people who need Japanese goods all over the world. I want to see your happy face. I want to serve you. I earlier, I was a white-collar worker in Japan. I deal mainly with Japanese fashion, audio, and books.
Tektronix P6015A High voltage probe - Note: Using the readout version with other than Tektronix digital scopes may result in an erroneous readout display.Features & Benefits. Model: P6015A. Make: Tektronix. High Bandwidth - 75 MHz. Silicone Dielectric.
Tektronix P6015 High voltage probe - Model: P6015. The probe's dielectric properties can be improved by filling it with fluorocarbon gas. Make: Tektronix. The standard probe includes a 10-foot interconnecting cable with a resistive center conductor, and the compensating box.
High voltage Differential probe, Schaffner MD200 - MD 200 high voltage differential probes are ideally suited to allow EMC engineers to verify their conducted EMC test generators periodically. Their performance permits to be used for many other purposes where higher voltages have to be measured in a potential free manner Surge pulse measurements Power quality measurements Rated for 7000 V/10 MHz, differential mode2 ranges: 1:1000 and 1:100 Parameter Value Attenuation ratio 2 ranges: 1:100 and 1:1000 Bandwidth DC to 10 MHz Accuracy +/-2% Max. input voltage differential mode 7000 V peak Max. input voltage common mode 3500 V peak
Keysight N2873A Passive Probe 10:1 500MHz with N2873-60001 Kit - Made in Germany - Compatible with Keysight InfiniiVision and Infiniium Series oscilloscopes with 1 MΩ input. N2873A Passive Probe 10:0 500 MHz 10Mohm for 1Mohm, 1.3m. Optional probe tip accessories provide specialized capabilities for demanding applications.
Tektronix P6156 Oscilloscope Probe - It is designed for use with wide band oscilloscope amplifiers with 50 Ω inputs, such as the Tektronix 11000-series scopes with the 11A71 plug-in. OSCILLSCOPE PROBE. make Supersized seem small. Get images that.
Tektronix AM 503 PG 508 TM 503 PULSE GENERATOR CURRENT PROBE AMPLIFIER - I am Japanese and live in Japan. I want to see your happy face. I want to serve you. However, I learned that there are many people who need Japanese goods all over the world. I earlier, I was a white-collar worker in Japan.
B&K PRECISION High Voltage Probe Meter HV 44A - Includes : Conventional Round Needle Tip, Flat Spring Tip and Instructions. Accuracy : +/-3% of Full Scale. Application : For Low Energy Applications. Quick Links. sporting goods.
Tektronix P6139B Voltage Probe NEW - P6139B features the TekProbe Interface for Direct BNC Connection for Oscilloscopes with 1 MOhm Inputs. These probes feature a small probe head and sharp tip that makes it easier to probe dense circuitry.
Fluke 1000V/10A Cat Iii Probe Test Lead (Tru35) - We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Hewlett Packard 10525T Logic Pulser Probe (Tru35) - NOVEMBER 2022. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Hewlett Packard Hp 10526T Logic Pulser Probe (Tru34) - NOVEMBER 2022. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
*Tc* Hv High Voltage Probe (Amd97) - NOVEMBER 2022. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Tektronix P2220 Voltage Probe NEW - (Note: Do not float with TDS2000, TDS2000B, TDS1000, TDS1000B, or TDS200 Series oscilloscopes.). Input Capacitance: 17.0 pF (typ). Input Capacitance: 110 pF (typ). Probe Length: 1.5 m. Input Resistance: 10 M?.
Tektronix TPP0100 Voltage Probe NEW - The TPP0100 probe is for use on BNC oscilloscopes with 1 MΩ/13 pF inputs. Neutral or. Low-frequency amplifiers.
Tektronix P5050 Passive High Voltage Probe 500Mhz 11.1Pf (Tru30) - NOVEMBER 2022. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Tektronix P5050 Passive Voltage Probe 500Mhz W/Marker Band Set --New(Tru22) - We are quick to respond and resolve. You will receive exactly what is in the photographs. Includes sealed marker band set and other accessories. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided.
Tektronix P6139A Passive Voltage Probes 500Mhz Set Of 2 (Tru24) - We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
LOT OF PROBES - 3 High Voltage (Fluke?) & 1 Low Capacity - The two red/black and black/clear have no observable markings they are high voltage I believe. The smaller one is an Eico low capacity probe. They look good and guaranteed.
Vitrek HVL-35G Probe NEW - It is supplied with a detachable toroid corona shield. Overall height is 240mm with 1.8m cable. High Impedance 35KV Probe ISO 17025 Cal w Data and Uncert. High Impedance 35KV Probe.
Tektronix TPP0500B Voltage Probe NEW - Designed for use with Tektronix MDO3000, MDO4000B, MSO/DPO4000B and MSO/DPO5000B Series oscilloscopes, this probes provides up to 500 MHz of analog bandwidth with less than 3.9 pF of capacitive loading.
One Lot Of Tektronix Equipment's For Sale. - It is specifically designed to operate on Tektronix oscilloscopes with TEKPROBE® interface. TDS360 Tektronix Digital Oscilloscope. The TDS360 is a 200 MHz, 2 channel digital oscilloscope from Tektronix.
Tektronix TPP0101 Voltage Probe - The TPP0101 probe is for use on BNC oscilloscopes with 1 MΩ/20 pF inputs. Input capacitance: <12 pF (typical). Probe cable length 1.3 m (4.2 ft). Input resistance: 10 MΩ ±1.5%.
^^ Tektronix P5050 Voltage Probe 500 Mhz 11.1 Pf 10X - New (Sab18) - We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Fluke 80K-6 High Voltage Voltmeter AC/DC Multimeter Probe - Air Force Surplus Item - Used, Serial No. engraved on side, see photos for details. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Motorola RTL-4011A Oscilloscope Probe Kit - Excellent Condition - Recently removed from working service and guaranteed functional. Cosmetically in excellent condition showing minimal signs of previous use. Includes Probe Kit as pictured. No additional items or accessories are included. Pictures are of one of the actual units available. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have. .
Keysight N2790A High-Voltage Differential Probe, 100 MHz - >50 dB at 1 MHz. The N2790A also have an overrange indicator which alerts the user when the probe input exceeds the dynamic range of the probe. Manufacturer: Keysight. Model: N2790A. Note: The probe is compatible with Keysight’s AutoProbe interface with 1 Mohm input where the probe’s power is supplied by the Keysight oscilloscope’s probe interface.
B&K Precision Hv 44A High Voltage Probe Meter - B&K PRECISION. Steel Storage Cabinet, 48 In W, 78 In H. Tennsco 6940 Add-On Bulk Storage Rack, 24 In D, 96 In W, 3 Shelves. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes.
Rigol PVP2350 Voltage Probe NEW - PVP2350: 1X/35MHz, 10X/350MHz, one/two Probes Kit. Also, with a bandwidth of 35 MHz in 1x mode that replaces the RP3300A. 1X: 1MΩ ±1% input resistance 50 pF ±20 pF input capacitance 150 VRMS CAT II max.
HEWLETT-PACKARD 1137A 5 kV DC OR pk HIGH VOLTAGE PROBE - HEWLETT-PACKARD 1137A 5 kV DC OR pk HIGH VOLTAGE PROBE (206530) In Stock & Ships within 24 Hours of Cleared Payment Units come with a 90 day warranty for electrical equipment and if it fails within a 90 day period it may be returned for a full refund and a 30 day warranty for non - electrical equipment. Seller will pay return shipping on any units that need to be returned. Returns not accepted if unit has been damaged. Units must be returned in original shipping package. Your satisfaction is very important to us. If you experience a problem of any kind with your purchase please contact us first before leaving any feedback or opening any claims. We stand behind our products and will do everything in our power to make sure that you feel satisfied with your purchase.
LECROY PPE-20KV HIGH VOLTAGE PROBE 100MHz - LECROY PPE-20KV HIGH VOLTAGE PROBE 100MHz (206336) In Stock & Ships within 24 Hours of Cleared Payment Units come with a 90 day warranty for electrical equipment and if it fails within a 90 day period it may be returned for a full refund and a 30 day warranty for non - electrical equipment. Seller will pay return shipping on any units that need to be returned. Returns not accepted if unit has been damaged. Units must be returned in original shipping package. Your satisfaction is very important to us. If you experience a problem of any kind with your purchase please contact us first before leaving any feedback or opening any claims. We stand behind our products and will do everything in our power to make sure that you feel satisfied with your purchase. Our Customer Support Team is available 8:30 AM- 5:00 PM Monday thru Friday EST.
Tektronix P5205A 50X/500X High Voltage Differential Probe 100MHz - The P5205A is equipped with the Tektronix TekProbe®interface which communicates scale information to the oscilloscope. 50X / 500X. 500X: ±1300 V. 50X: ±130 V. Differential Input Impedance. Input Impedance between each Input and Ground.
Tektronix P5202A 20X/200X High Voltage Differential Probe, 100MHz - The P5202A is equipped with the Tektronix TekProbe®interface which communicates scale information to the oscilloscope. 20X / 200X. 200X: ±640 V. 20X: ±64 V. Differential Input Impedance. Input Impedance between each Input and Ground.
PinTek High Voltage Probe HVP40 40,000 volts DC. 28,000 volts AC (50/60 Hz) US - Input impedance:1000MΩ. AC : 1 ~ 28KV ( 50 / 60 Hz ). Remark:For 10MΩ input impedance. Input Impedance. DC : 0 ~ 40KV. Maximum loading Current:≦ 40μA ( at 40KV DC ). DC : ± 1% to 20KV. AC : - 5 % to - 10 % ( 1 ~ 28KV ; 50 / 60Hz ).
Tektronix P6130 10X Passive Oscilloscope Probe - The P6130 is a subminiature 10X passive probe designed for use with all general-purpose oscilloscopes. It is fully compatible with the tektronix family of subminiature probe accessories. Model: P6130.
^^ Tektronix Tek P6205 Fet Probe 750Mhz 10X (Ej105) - We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is atta.
Tektronix P6007 High-Voltage Passive Probe - Model: P6007. The P6007 consists of a probe-body assembly and a 3.5, 6, 9 or 12-foot cable. Make: Tektronix. Compensation is accomplished by turning the probe body and tip assembly while holding the knurled section at the base of the probe.
Tektronix P6138A 350MHZ 10X, 1.3M Passive Probe - Model: P6138A. The Tektronix P6138A compact probe head/tip assembly is compatible with the full line of compact accessories. When the Subminiature/Compact-to-Miniature probe tip adapter (013-0202-03) is installed over the probe head/tip, it is fully compatible with all miniature tip accessories.
New Tektronix P6139B Passive Probe: 500 MHz: 10X: BNC - These probes feature a small probe head and sharp tip that makes it easier to probe dense circuitry. The P6139B and P5050B share similar electrical specifications but support Tektronix oscilloscopes with different compensation ranges.
^^ TEKTRONIX P6205 FET Voltage Probe 750MHz (YB17) - We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
^^ TEKTRONIX P6205 FET Voltage Probe 750MHz (YB16) - We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
2- Dynascan Dyna-Probe Oscilloscope Clip Part CLP-18 - 2- Dynascan Dyna-Probe Oscilloscope Clip Part CLP-18. Items appear in nos, never used condition. Please email with any questions or concerns. Thanks for looking!
Tektronix P5100A High Voltage P-Series Probe 100X, DC to 500 MHz - Tektronix P5100A. 100X, DC to 500 MHz. 100X with Readout Coding. DC to 500 MHz. 2500 VPeak, 1000 V CAT II. No exceptions. They’re the best of the best, so you never have to worry when you buy from us.
Fluke 80K-6 Hv Probe (Vq11) - We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Fluke 80K-6 HV High Voltage Probe 6kV PK Max - The probe point is clean and in good condition. All cables and connectors are clean and in good condition. The handle and grip are in good condition. Includes everything in the pictures and nothing else.
^^ TEKTRONIX P6015A 1000X High Voltage Probe DC-75MHz (HU50) - No accessories including standard power cord/cable. We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided.
Tektronix 015-049 Compensating Box High Voltage Probe w/ Long Cord, Case, Extras - It is also subject to change during peak periods. We work hard to include a lot of pictures of each item. We take joy in helping you get the gear you want at the price you need. Most of our photos are of the actual item you are purchasing.
Teledyne LeCroy PP007-WR-1 Voltage Probe NEW - Passive probes are the standard probe provided with most oscilloscopes. LeCroy, Probe, Passive, WaveRunner Oscilloscopes, 10:1 500 MHz 10 M. Bandwidth (Probe Only) 500 MHz.
Teledyne LeCroy PP005A Voltage Probe NEW - Passive probes are the standard probe provided with most oscilloscopes. LeCroy, Probe, Passive,10:1 500MHz 10 MOhms CATII. Input Capacitance 11 pF. Bandwidth (Probe Only) 500 MHz. Input Resistance 10 MΩ.
Bk Precision Pr-28 High Voltage Probe Up To 40 Kv - After we receive the item back at our facility, we will confirm that the item is indeed ours and defective. After we make our confirmations then we will replace the defective item with an equivalent item.
BK HV 44A 40kV High Voltage Probe Meter - AUTHORIZED - WE EXPORT - One tip is a round needle type for general use, the other is a special flat spring type for easy access to a CRT anode. An alligator type clip lead provides a secure earth ground connection. 1 year manufacturer warranty.
Tektronix P6015 High Voltage Probe Untested sold as is. - Tektronix P6015 High Voltage Probe Untested sold as is.. Condition is "For parts or not working". Shipped with USPS Priority Mail. Comes as pictured does not include any cables or accessories.
^^ Agilent 34136A High Voltage Probe (Rb18) - APRIL 2021. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Tektronix TPP0500 500 MHz Passive Probe 300V CAT II 3.9pF/10Mohms - Recently removed from working service and guaranteed functional. Cosmetically has wear from previous use including scuffs and scratches. Includes Probe as pictured. No additional items or accessories are included. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have. Thank you for checking out our listing. .
Ballantine High Voltage Probe, Model 10800B - Ballantine 10800B HV probe. Works fine at 3.4KVDC. I'm sure it's NOT rated to 80KV, as the 8 in the part number might indicate.
GW Instek GDP-040D 40MHz Dual Channel Differential Probe - This item is a new GW Instek GDP-040D 40MHz Dual Channel Differential Probe. Instek GDP-040D 40 MHz Dual-Channel Differential Probe for the GDS-300/200 series Oscilloscopes. 40MHz Dual Channel Differential Probe for GDS-200/300, Cat II 600V.
On Consignment - Simpson 0155 10Kv Dc High Voltage Probe W/ Box & Manual - Nos! - PROBE PLASTIC BODY IS CLEAN AND FREE OF ANY DEFFECTS - WHICH ARE IMPORTANT TO MAINTAIN INSULATION AT THE 10KV POTENTIAL. THIS IS A 100:1 PROBE. PROBE TIP & LEADS ARE ALSO I PERFECT CONDITIONS.THE THREADED CO-AX CONNECTOR IS CHECKED AND IS PERFECT.
Fluke 983T 80K To 6 High Voltage Probe 6KV PK Max - Fluke 983T 80K To 6 High Voltage Probe. From Fluke:Product overview: Fluke 80K-6 High Voltage ProbeThe 80K-6 is a high voltage probe designed to extend the voltage measuring capability of an AC/DC voltmeter to 6000 volts peak AC or DC Overvoltage Category I. This means the probe can only be used to make measurements on energy limited circuits within equipment. Examples include high voltage within televisions or photo copy machines. DO NOT use this probe to measure high voltages on power distribution systems. The probe provides high accuracy when used with a voltmeter having 10 Megohm input impedance.Condition is "Used".
High voltage oscilloscope probe 15 kV DC 20 kV AC (replication) - (15 kV DC 20 kV AC (own production). To adjust the linearity of the frequency response, connect the probe to an oscilloscope and apply a 50+ volt, 50+ kHz square wave test signal to the probe. 4) Input capacitance 1-8 pF.
Silicone High Voltage 4mm Banana Plug to Alligator Clip Test Leads 5 colors - Dual 4mm Banana Plug End. 1pc 5mm Full Insulate Alligator Clip to 4mm Banana Female Test Clamp Opening. 1 set Alligator Test Clip to Banana plug 1M Red + Black. 10pc 1/2 AA 1/2AA 14250 Battery Storage Box Case Holder 3.6V PCB Pin Solder Lead.
1pair Silicone High Voltage 4mm Banana Plug to Banana Plug Test Leads Cable - Dual 4mm Banana Plug End. 4pcs 2M/6.6ft Extension Data Cable Micro USB 5pin Male to Female Straight Cable. - Silicone Housing & 1mm2 Conductor Copper Wires. - Length: 1M/3.3FT. 1 set High-quality 2.6" 0.8M Dual Banana Male, Male to Male Plug Test Lead Cable.
NEW TEKTRONIX P6139A OSCILLOSCOPE PROBE 10-OMS 300-V 8.0pf - We do not buy direct from the manufacturers or from authorized dealers. The serial numbers in the pictures are covered to prevent mischief by hackers or others that want to cause harm. The item is sold as is.
8pcs Hantek Test Probes Oscilloscope Clip Probe 100MHz Testing Probes 1x 10x CE - 8pcs HANTEK Oscilloscope Probes. Compensation scope. 1.8xOscillograph Rapier Probes. Temperature scope. Integral injection molding makes the usage more flexible and adapt more testing situations. From orthodontics to oral surgery, your patients all have one thing in common: they demand the best professional dental care.
Tektronix P5200A 50 MHz, 50X/500X High Voltage Differential Probe - Model No: P5200A. Our Model No: P5200A. Bandwidth: 50MHz -- Attenuation: 50X / 500X. Dynamic Range: 1300V, 1 kV CATII, 600 V CAT III -- Input Impedance at the Probe Tip: 5 MO / 4 pF. Up to 1,300V Differential (DC + pk AC) -- Up to 1,000V Common (RMS).
HIOKI 9322 DC-10MHz 2000 V DIFFERENTIAL PROBE - HIOKI 9322 DC-10MHz 2000 V. DIFFERENTIAL PROBE. DC mode: Waveform monitor output, DC to 10 MHz ±3 dB. allowable input:2000 V DC, 1000 V AC. (DC jack OD 5.5 mm (0.22 in), ID 2.1 mm (0.08 in)). If you have any carrier account, We can use it.
8pcs Hantek Test Probes Oscilloscope Clip Probe 100MHz Testing Probes 1x 10x CE - 8pcs HANTEK Oscilloscope Probes. Compensation scope. 1.8xOscillograph Rapier Probes. Temperature scope. Integral injection molding makes the usage more flexible and adapt more testing situations. From orthodontics to oral surgery, your patients all have one thing in common: they demand the best professional dental care.
Digital High Voltage Isolation Probe Measurement 50MHz7ns Over Range Warning CE - Imput Capacitance Single-ended to ground:7pF. Imput Impedance Single-ended to ground:4MΩ. Over Range Warning Function. Probe Body 120 55 24(mm). Over Range Warning. Most U Want Dental Lab Supplies. Length of Input Cable About 60cm About 30cm.
USED: Polaris Industries Model 651 HV Probe Meter 40 KVD - See photos. Includes only what is shown in the picture. Most boxes have been opened for inspection and photos. In the event that any clauses or phrases contained here within are ruled out by a judge, the law, a lawyer, jurors, and or any other entity all others remain in effect.
CPS HVP-251 Precision DC High Voltage Probe 50 kV Max Untested - Excellent accuracy: 0.05% from 0 to 50 kV. 1,000 MΩ input impedance. Precision DC. Temperature coefficient under 50 ppm/°C. BRL Test is corporate friendly. We understand the traditional acquisition and capital approval process.
AEMC 2135.39 Ground Rod, 2, 14.5 in. T-shaped aux ground electrodes - AEMC 2135.39 Ground Rod, 14.5 in. T-shaped Auxiliary Ground Electrodes, Set of 2, for Ground Testers. T-shaped Ground Rods. For use with all Ground Testers (except clamp-ons). 2 - Ground Rods. Our Model No: 213539.
Tektronix P6015A 75 MHz, 1000X, Single-Ended High Voltage Probe - Model No: P6015A. Our Model No: P6015A. Optional 1000X readout coding. Note: Using the readout version with other than Tektronix digital oscilloscopes may result in an erroneous readout display. DC to 75 MHz.
2 Each Ohmite E300K12A Linked 12 Ohm 300 Watt Tubular Ribwound Resistors - RESISTOR, 12 OHM, 300 WATT, ADJ. TUBULAR, RIBWOUND, +-10% TOLERANCE. 2 OHMITE E300K12R RESISTORS. We have, however, described each item to the best of our abilities. If you do not like what you see, that is ok too.
Tektronix P3010 100 MHz, 10X Passive Voltage Probe - Tektronix P3010 100 MHz Passive Probe, 10X with Readout for TDS3000 Series. Model No: P3010. Our Model No: P3010. Miniature Probe Tip Compatible with a Wide Range of Tektronix Accessories and Adapters.
Motorola RTL-4011A Oscilloscope Probe Kit - Prob was pulled from a working environment. Prob has wear from previous use including scuffs and scratches. Quantity listing with reference photo, you may not receive the actual item pictured. Comes as shown in images. Unit is on hand and ready to ship. Please feel free to message us any question you may have. Thank you for checking out our listing. .
Vintage Philco High Voltage Probe 425-0022 HV Prove VERY OLD Radio TV Repair Man - Vintage Philco High Voltage Probe 425-0022 HV Prove VERY OLD Radio TV Repair Man Free Shipping. Possibly NOS or if it was used it wasnt used much as it’s in really nice condition. Still in the original tube. Nothing attached to the end of the handle- this is as found. Little bit of writing on the label. Great vintage Philco piece.Tote 16
Pintek High Voltage low noise probe scope DMM 50Mhz 15KV 1000:1 Tektronix HVP15 - DC : 0 ~ 15KV. BANDWIDTH:DC~50MHz. -3dB 50Mhz. Connect with PL-10, HVP-15HF can be used for DMM. Input Capacitance: 3.0PF+- 0.5PF. Remark:For 10MΩ input impedance. AC : pulse <= 30KV peak to peak. Single /Noise DC >= 60dB (1KHZ); >= 50db (1Mhz).
Agilent Hewlett Packard HP K05-3440A High-Voltage probe - SEARCH T&Cs. high pressure components. video components. valves and fittings. rf radio frequency components. power supplies. optical parts & assemblies. machine tools.
HIGH-VOLTAGE PROBE FOR DMM DC 0-30KV AC 0-20KV 1000Mohm - DC:0~30KV AC:0~20KV. DC:0~20KV AC:0~14KV. The probe s large size and rugged construction provides superior protection. ground lead is fed through the body of the probe and protrudes behind the safety.
HIGH-VOLTAGE PROBE FOR DMM DC 0-20KV AC 0-14KV 1000Mohm - Up to 20kVDC, 14kV AC. DC:0~20KV AC:0~14KV. DC:0~30KV AC:0~20KV. The probe s large size and rugged construction provides superior protection. ground lead is fed through the body of the probe and protrudes behind the safety.