Tektronix-P6703B - TDS500C/700C (Opt. 3C or 4C) P6701B: Fibre Channel up to 1063 Mb/s, P6703B: SONET/SDH up to 622 Mb/s. SONET/SDH and Fibre Channel Reference Receiver Performance Probe Connects Directly to TDS7000/5000/3000/500/600/700 Series Scope.
LeCroy HFP2500 2.5 GHz Active Probe - This LeCroy active probe is being sold as used. It is in good condition with minimal signs of use. Accessories re not included. -You save on surplus products. -We recover surplus parts. -We recycle surplus electronics products.
TekBox TBCP1-200 RF Current Monitoring Probe - Local pick up is not available. We do not accept P.O. BOXES. Photos are greatly appreciated! If your item appears defective, a call to the manufacturer may solve your issue.
Com-Power CLCE-1032 - Monitoring Probe for CISPR MIL-STD 461 & D0-160 - Transfer impedance (dB?). : -40 to 2 dB?. Local pick up is not available. We do not accept P.O. BOXES. Photos are greatly appreciated! If your item appears defective, a call to the manufacturer may solve your issue.
Langer EMV MFA-K 0.1-12 Near-Field Micro Probe 100 MHz up to 6 GHz, NEW-UNUSED - Langer EMV MFA-K 0.1-12 6GHz Near-Field Micro Probe, NEW-OPEN Box, unused condition. The near-field micro probe is shielded from field lines entering the probe head laterally. The hand-guided, high resolution MFA-K 0.1-12 is an active near-field micro probe that requires the BT 706 bias tee to operate.
Ets-Lindgren / Emco 7405 E & H Near Field Probe Test Kit - 7405-901 H-Field 6.0 cm Loop Probe. 7405-902 H-Field 3.0 cm Loop Probe. 7405-903 H-Field 1.0 cm Loop Probe. 7405-904 E-Field 3.6 cm Ball Probe. 7405-905 E-Field 6.0 cm Stub-tip Probe. Our 30,000 Sq. Kit consists of.
New Tektronix TPP0101 Passive Probe: 100 MHz: 10X: BNC - The TPP0101 probe is for use on BNC oscilloscopes with 1 MΩ/20 pF inputs. Model: TPP0101^. Make: Tektronix. Passive Probe: 100 MHz: 10X: BNC. 100 MHz Bandwidth. Bandwidth: DC to 100 MHz. Probe cable length 1.3 m (4.2 ft).
Reutlinger Meter WSG 69/71/25/5 Vibration Vibration Proximity Sensor Sample - Reutlinger Messgeber WSG 69/71 - 25/5 für Anpassungseinheit 931 Schwingungssensor Wegsensor Wellenschwingung vibration sensor shaft vibration proximitry probe for proximitor 931 2 Stück verfügbar - weitere Messtechnik biete ich in weiteren Auktionen an 2 pieces available - for further measurement equipment see my other offers
Reutlinger Meter WSG 69/25/5 Vibration Vibration Proximity Sensor Sample - Reutlinger Messgeber WSG 69/25/5 für Anpassungseinheit 931 Schwingungssensor Wegsensor Wellenschwingung vibration sensor shaft vibration proximitry probe for proximitor 931 9 Stück verfügbar - weitere Messtechnik biete ich in weiteren Auktionen an 9 pieces available - for further measurement equipment see my other offers
HAC probes axial and radial - Fine condition, includes storage bag, used in connection with the Helmholz antenna for rf level indication. This has been used in Nokia Salo mobile phone product development. Includes both axial model A-100 and radial model R-100 probes. Serial number on each is 007. Manufactured by Communication Certification Laboratory 1940 West Alexander street, Salt Lake City UTAH 84119
Gossen 3-620-248-01 - Spiral Probe 1.5m - Local pick up is not available. We do not accept P.O. BOXES. Photos are greatly appreciated! If your item appears defective, a call to the manufacturer may solve your issue.
Langer EMV SX-R 20-1 Near-Field Probe Set, NEW-OPEN Box condition - This item isLanger EMV SX-R 20-1 Set Near-Field Probes 1 GHz up to 20 GHz. The near-field probe is small and handy. It has a sheath current attenuation and is electrically shielded. The near-field probe is connected to a spectrum analyzer or an oscilloscope with 50 Ω input.
Lecroy PP007-WR Passive Probe, 500 MHz, - C7 - Certified Pre-Owned. · Zero defects. · Software test results are available. · Repaired with OEM original parts. · All functions tested and verified working through software tests. F6 = Like New (Appendix C - Test and Repair).
Keysight 85024A High-Frequency Probe 300 KHZ - 3 GHz - YOU WILL RECEIVE A AGILENT KEYSITE 85024A HIGH FREQUENCY PROBE. Excellent frequency response and unity gain. High probe sensitivity. Low distortion levels.
Keysight N2803A 30 GHz InfiniiMax III Series Probe Amplifier - MFG CALIBRATED - The accessories are sealed and it looks like this probe was never used. A proprietary 200 GHz fT InP (indium phosphide) IC process with backside ground vias and novel thick film technology is utilized for the InfiniiMax III probe system to accommodate your highest performance needs and is unmatched by any product in the market.
Pr261 Bk Sniffer Probe Set - PR261 BK SNIFFER PROBE SET BK Precision PR 261 - 2615/20/25/30 Sniffer Probe 2615/20/25/30 Sniffer Probe 0.1MHz to 1GHz Frequency range (lower frequency limit depends on probe) Output impedance 50ohms Input capacitance 2pF (high impedance probe) Max input level +10dBm.
HP - Agilent - Keysight 10073D Passive Probe, 10:1, 500 MHz, 1.5 m - Model: 10073D. 10073D Passive Probe, 10:1, 500 MHz, 1.5 m. The Agilent 10073D passive probe is our most rugged 500 MHz probe. With a 10:1 attenuation ratio and high 2.2 M ohm input impedance, it is ideal as a general purpose, high bandwidth passive probe for the Agilent 300 MHz - 1 GHz 6000 series, 7000, 8000 and 9000 Series oscilloscopes.
TekBox TBCP1-250 RF Current Monitoring Probe - Local pick up is not available. We do not accept P.O. BOXES. Photos are greatly appreciated! If your item appears defective, a call to the manufacturer may solve your issue.
HP - Agilent - Keysight E2697A high impedance probe - The E2697A high impedance adapter allows connection of probes that require a high impedance input (e.g., passive probes, current probes) to the Infiniium 54850, 80000 and 90000 Series of high performance oscilloscopes.
HP - Agilent - Keysight 1157A Active Probe, 2.5 GHz US41005227 - Model: 1157A. These probes were designed specifically for the Infiniium Series, and InfiniiVision 5000, 6000, and 7000 Series oscilloscopes (except for 6000 Series 100MHz models). As the speeds in your design increase, you may notice more overshoot, ringing, and other anomalies when connecting an oscilloscope probe.
Tektronix P7708 8 GHz TriMode Probe with TekFlex connector technology, - The Tektronix P7708 8 GHz TriMode Probe with TekFlex Connector Technology and TekConnect Interface P7708 uses TekFlex connector technology, combining a high speed signal path with power and communication support for an active buffer tip in a single, easy to connect accessory connector.
Tektronix TAP3500 3.5GHz Active Probe 30Vpk Max - Model: TAP3500. 3.5GHz Active Probe 30Vpk Max. Make: Tektronix. Users should select probes with a low input capacitance specification (~1 pF) to minimize the probe’s loading effect on the circuit. High probe bandwidth.
HP-Agilent-Keysight, Active Probe 54701A 2.5GHz, 0.6pF - Model: 54701A. The 54701A Active Probe is a 2.5GHz, 10:1 probe that provides ultra-low loading on a device-under-test because of its low 0.6 pF capacitive loading and its high 100 kohm resistive loading.
Tektronix P6204 1GHz FET Probe - TEK P6204 Active FET Probe Features The P6204 and P6205 Probes are part of Tektronix' line of Low Circuit Loading Signal Acquisition probes for CSA (Communications Signal Analyzers), DSA (Digitizing Signal Analyzers), 11000 Series and the TDS Family of Oscilloscopes.
HP - Agilent - Keysight 1157A Active Probe, 2.5 GHz - Model: 1157A. These probes were designed specifically for the Infiniium Series, and InfiniiVision 5000, 6000, and 7000 Series oscilloscopes (except for 6000 Series 100MHz models). As the speeds in your design increase, you may notice more overshoot, ringing, and other anomalies when connecting an oscilloscope probe.
Tektronix P6701B Probe O/E Converter DC-1GHz B010500 - Model: P6701B. Make: Tektronix. Item Specifics/Condition. This sale does not include probes/leads, cables, adapters, manuals, power cords, batteries or other accessories.
Keysight N7026A AC/DC High Sensitivity Clamp-On Current Probe, 150MHz CALIBRATED - The Keysight N7026A is a 150 MHz bandwidth, active current probe for InfiniiVision and Infiniium oscilloscopes. The probe features wide and flat bandwidth (DC-150 MHz), lower noise (<250 µArms), and wide input range (up to continuous 30Arms or non-continuous 40Apeak).
Langer EMV HR-E 40-1 Set Near-Field Probes Up to 20 GHz - The HR-E 40-1 set contains the HR-E 40-1 E-field probe. This item is a new Langer EMV HR-E 40-1 Set Near-Field Probes Up to 20 GHz. 1x Case 4, System Case Near-Field Probes. Upper cut-off frequency 40 GHz.
Langer EMV SX-R 20-1 Set Near-Field Probes 1 GHz up to 20 GHz - This item is a new Langer EMV SX-R 20-1 Set Near-Field Probes 1 GHz up to 20 GHz. The near-field probe is small and handy. It has a sheath current attenuation and is electrically shielded. The near-field probe is connected to a spectrum analyzer or an oscilloscope with 50 Ω input.
Rohde & Schwarz RT-ZS30 3 GHz 1 M ohm, 0.8 pF Active Single Ended Probe - The comprehensive accessory set allows this probe to be connected to a wide variety of devices under test (DUT). Since the probe is equipped with Rohde & Schwarz probe interface, it can be connected to any Rohde & Schwarz base unit that is compatible with this interface.
Tektronix P6231 DC-1.5GHz Active Probe - Tektronix P6231. DC-1.5GHz Active Probe. Input Dynamic Range +5V--5V Offset <10mV. If you have any carrier account, We can use it. 1X 50ohms Input. Output Load 50ohms.
Spectrum Probe VOS 107 - In good condition, see picture for details. includes what is seen in the pictures.
Ets-Lindgren / Emco 7405 E & H Near Field Probe Test Kit - 7405-901 H-Field 6.0 cm Loop Probe -NOT INCLUDED / MISSING. 7405-902 H-Field 3.0 cm Loop Probe. 7405-903 H-Field 1.0 cm Loop Probe. 7405-904 E-Field 3.6 cm Ball Probe. 7405-905 E-Field 6.0 cm Stub-tip Probe.
ETS-LINDGREN / EMCO 7405 E & H Near Field Probe Test Kit - 7405-901 H-Field 6.0 cm Loop Probe. 7405-902 H-Field 3.0 cm Loop Probe. 7405-903 H-Field 1.0 cm Loop Probe. 7405-904 E-Field 3.6 cm Ball Probe. 7405-905 E-Field 6.0 cm Stub-tip Probe. Our 30,000 Sq. Kit consists of.
Aaronia EMC Sniffer/Probe Set PBS2 DC - 9GHz With Pre-Amplifier - This item is a new Aaronia EMC Sniffer/Probe Set PBS2 DC-9GHz With Pre-Amplifier. • Pre-Amplifier noise (PBS2): 3.5dB typical. • PreAmplifier type/gain (PBS2): "linear" falloff. 1MHz: 40dB; 3GHz: 37.5dB; 6GHz: 35dB.
Aaronia EMC Sniffer/Probe Set PBS1 DC - 9GHz - This item is a new Aaronia EMC Sniffer/Probe Set PBS1 DC-9GHz. Detecting circuitry overly sensitive to interference. Estimation of interference field strength. KEEP IN TOUCH! New products typically carry a 1 Year Warranty.
853-032582-001 Assy, Frequency Shift Module - WARRANTY IS NULL VOID IF ANY ITEM IS TAMPERED WITH, OPENED OR DISASSEMBLED. ALL CLAIMS MUST BE REPORTED AND ACKNOWLEDGED WITHIN 72 HRS OF RECEIPT. System was de-installed in working operational condition.
100pcs Spring Pressure Test Probe Pogo Pin P75-J1 Dia 1.02mm Length 16.5mm - Feature: The spring Test Probe Receptacle is used for insert test probe, so, it let you easy to replace the test probe when it has problem after the life time reached or damaged, and extend the life of your test station. Used for conductive test,test stability and durability. Specification: Model: P75-J1 Current: 3A Resistance: 50mΩ Spring pressure: 100 g Material: copper, steel Color:Golden and Silver Size: 1.02 x 16.5mm/0.04 x 0.65""""(Dia x L) Weight:8g Package Include: 100 x Spring Test Probe Pogo Pin" Brand Unbranded MPN Does not apply UPC Does not apply EAN Does not apply.
Tektronix P6245 1.5GHz Active Probe - Tektronix P6245. 1.5GHz Active Probe. Bandwidth in GHz(probe only):1.5GHz. Linear Dynamic Range:+-8V. If you have any carrier account, We can use it. DC Offset Range:10V. Attenuation:10x.
HP 10073A DC-500MHz X10 Passive Probe NEW - HP 10073A DC-500MHz X10. Scope bandwidth: 500MHz (typical). Passive Probe NEW. Robust general purpose 10: 1 passive probe. Not accepted. Length (including cable): 1.5 m. If you have any carrier account, We can use it.
Probe Master 4916 Probe 4900 Oscilloscope probe Master Kits, 150-250MHz - Probe Master 4916. Probe 4900 Oscilloscope probe Master Kits, 150-250 MHz. ROR does not apply to rental orders. Top Dog Test is corporate friendly we understand the traditional acquisition and capital approval process.
RF probe AD8307 based, 50 Ohm 0.1-500 MHz SMA input - Probe has special input linearization RF network for better performance. This lot includes assembled and well tested RF probe with AD8307 detector PCB. Even old marker pen will be ok. Input connector: SMA male.
1PCS NEW FOR 3-Way Power Divider PD-0.5/6-3S 0.5-6GHz 30W SMA RF - 1PCS New For HIGHLY Micro Switch Z15G1704 15A 125 / 250VAC. 1PCS New For Omron Photoelectric Switch Fiber Unit E32-ZD200 ( E32ZD200 ) 2M. 1PCS USED CETC CTI OSC5A2B02 10MHz 5V 26 26 12mm OCXO Crystal Oscillator.
Langer EMV P503 Probe Set RF Power Injection acc. IEC 62132-4 EMC Tools - Langer EMV P503 Probe Set RF Power Injection acc. IEC 62132-4 EMC Tools. This item is a new Langer EMV P503 Probe Set RF Power Injection acc. IEC 62132-4. The P503 coupling network is connected to a power amplifier.
Langer EMV P1402 / P1502 Probe Set RF Field Coupling up to 3 GHz EMC Tools - The IC to be tested is tested while it is running. The P1502 E-field source is operated in connection with a power amplifier and a RF signal generator. This item is a new Langer EMV P1402 / P1502 Probe Set RF Field Coupling up to 3 GHz (EMC Tools).
Langer EMV P500 Probe Set RF Power Injection IEC 62132-4 EMC Tools - RF & Microwave. 1xP500 m, P500 Set User Manual. The P502 coupling network is connected to a power amplifier. The P503 coupling network is connected to a power amplifier. The P501 coupling network is connected to a power amplifier.
Langer EMV P1202-2 Probe Set ESD Magnetic Field Coupling EMC Tools and Probes - The field source, which are included in the probe set ESD/magnetic field coupling, generates magnetic ESD fields. The reason for this is the ESD immunity of PC boards and electrical devices. The immunity is tested (IEC 61000-4-2).
Langer EMV P331-2 Probe Set ESD Pulse Injection acc. IEC 61000-4-2 EMC Tools - 1xP331 m, P331 Set User manual. Langer EMV P331-2 Probe Set ESD Pulse Injection acc. IEC 61000-4-2 EMC Tools. This item is a new Langer EMV P331-2 Probe Set ESD Pulse Injection acc. The P331-2 probe set is used for conducted coupling of ESD pulses into ICs.
Langer EMV P1202-4 / P1302-4 Probe Set EFT/Burst Field Coupling EMC Tools - On request, the RF cable with the connections Fischer socket-SHV socket (HV FI-SHV 1m) can be ordered. The field sources, which are included in the probe set EFT/Burst field coupling, generate electric and magnetic EFT/Burst pulse fields.
Langer EMV P1602 / P1702 Probe Set RF Field Emission up to 3 GHz EMC Tools - 1xP1600 / P1700 m, P1602 / P1702 Set User Manual. The fields couple into the near-field electrode. RF & Microwave. In order to locate the magnetic field current in different orientations the RF magnetic field probe is 360° rotatable above the IC.
Langer EMV P1601 / P1702 Probe Set RF Field Emission up to 1 GHz EMC Tools - The fields couple into the near-field electrode. 1xP1600 / P1700 m, P1602 / P1702 Set User Manual. RF & Microwave. In order to locate the magnetic field current at different orientations the RF magnetic field probe is 360° rotatable above the IC.
Langer EMV P603-1/P750 Set IC Test System RF Conducted Measurement IEC 61967-4 - 1xP603-1 / P750 m, P603 / P750 Set User Manual. The P750 probe has of a high resistance, capacitive coupled input. 1xP603 / P750 case, System Case. RF & Microwave. 1xP603-1, RF Current Probe 1 Ohm. New products typically carry a 1 Year Warranty.
Langer EMV P603/P750 Set IC Test System RF Conducted Measurement - 1xP603 / P750 m, P603 / P750 Set User Manual. The P750 probe has of a high resistance, capacitive coupled input. 1xP603 / P750 case, System Case. RF & Microwave. 1xP603, RF Current Probe 1 Ohm. New products typically carry a 1 Year Warranty.
Langer EMV H4-IC Probe Set EFT/Burst Magnetic Field Source EMC Tools and Probes - This item is a newLanger EMV H4-IC Probe Set EFT/Burst Magnetic Field Source. Specially developed by Langer EMV-Technik, it is designed with an SHV and a special SMB connector. The field source is usually aligned so that the field-line bundle penetrates the area of the IC housing and thus the die in the orthogonal direction.
Langer EMV P202/P302 L-EFT Set Pulse Injection 1.5/5 ns and 1.5/20 ns - For automated tests the generators are used with the IC Tester ICT1. For automated testing the ICE1 as well as the ICT1 IC tester is required. TheP202 L-EFT pulse-current generator is used for the conductive coupling of disturbance pulses into test ICs.
Langer EMV S603/S750 Probe Set 1Ω/150Ω Conducted RF Measurement acc. IEC 61967-4 - IEC 61967-4. RF & Microwave. to IEC 61967-4. 1xS603, 1 Ohm, RF Current Probe, 0 kHz - 3 GHz acc. KEEP IN TOUCH! New products typically carry a 1 Year Warranty. This set consists of These rules vary from country to country, check with the import rules of your country or state.
Langer EMV ICE1 Set IC Test Environment - EMC Tools & Probes Integrated Circuits - The test IC is installed on the test PC board. The PC board is inserted into the GND 25 ground plate and via a connector connected to CB 0708 connecting board. The test IC is tested in operation. These sets are not included in the scope of delilvery.
Tektronix P8018 20GHz 28ps Single-Ended TDR Probe - Probe Only bandwidth:>20GHz. Probe Pitch:1.8mm(signal to ground). manual,SMA-Cable,ground clip 20,hard-Case. Max Vin:+-5.0V. If you have any carrier account, We can use it.
Tektronix P7350SMA 5GHZ SMA Differencial Probe - Tektronix P7350SMA 5GHZ SMA. Differencial Probe. Differencial Input Resistance:100kohm. If you have any carrier account, We can use it.
Tektronix P7513A TriMod Differential Probe, 13 GHz, for TekConnect - Tektronix P7513A TriMod Differential Probe. 13 GHz, for TekConnect Interface Oscilloscopes. Interface:TekConnect. Differential Input Range:+-0.75V(5x),+-1.75V(12.5x). If you have any carrier account, We can use it.
YOKOGAWA PBA2500 DC-2.5GHz Active Probe - YOKOGAWA PBA2500. DC-2.5GHz Active Probe. 10:1 Single-end Active Probe. Connector:PB Series Probe I/F 7019-13 for DL9000 Series. Dynamic Range:+-7V. If you have any carrier account, We can use it.
Tektronix P7350 5.0GHz Differencial Probe - Differencial Probe. Differencial Input Resistance:100kohm. Tektronix P7350 5.0GHz. Interface:TekConnect. Noise:46nV/the square root of Hz. If you have any carrier account, We can use it.
Langer EMV MFA 02 Set Micro Probes 1 MHz up to 1 GHz (EMC Tools and Probes) - This item is a new set of Langer EMV MFA 02 Set Micro Probes 1 MHz up to 1 GHz. Each hand-guided MFA near-field micro probe has an integrated preamplifier. The near-field micro probes are connected via the BT 706 to a spectrum analyzer or an oscilloscope.
Langer EMV MFA 01 Set Micro Probes 1 MHz up to 6 GHz (EMC Tools and Probes) - This item is a new set of Langer EMV MFA 01 Set Micro Probes 1 MHz up to 6 GHz. Each hand-guided MFA near-field micro probe has an integrated preamplifier. The near-field micro probes are connected via the BT 706 to a spectrum analyzer or an oscilloscope.
Langer EMV A300-2 Set Optical Fiber (Fibre) Probe 2-channel, 5 MHz EMC Probes - This item is a new set of Langer EMV A300-2 Set Optical Fiber (Fibre) Probes 2-channel, 5 MHz. The A300-2 set consits of two sensors, which allow for displaying oscilloscopically analog signals under EFT/ESD/RF interference potential free.
Langer EMV A300-1 Set Optical Fiber (Fibre) Probe 1-channel, 5 MHz EMC Probes - This item is a new set of Langer EMV A300-1 Set Optical Fiber (Fibre) Probes 1-channel, 5 MHz. The A300-1 set consists of a sensor, which allows for oscilloscopically displaying analog signals under EFT/ESD/RF interference potential free.
Langer EMV A200-1 Set Optical Fiber (Fibre) Probes 1-channel, 500 kHz EMC Tools - This item is a new set of Langer EMV A200-1 Set Optical Fiber (Fibre) Probes 1-channel, 500 kHz. The A200-1 set consists of a sensor, which allows for oscilloscopically displaying analog signals under EFT/ESD/RF interference potential free.
Langer EMV A100-2 Set Optical Fiber (Fibre) Probe 2-channel, 25 kHz EMC Probes - This item is a new set of Langer EMV A100-2 Set Optical Fiber (Fibre) Probe 2-channel, 25 kHz. The A100-2 set is used for oscillographing analog signals under EFT/ESD/RF interference. The optical signals are transmitted via a fibre optical cable to the optical receiver which then transforms them into electrical signals.
Langer EMV A100-1 Set Optical Fiber (Fibre) Probe 1-channel, 25 kHz EMC Probes - This item is a new set of Langer EMV A100-1 Set Optical Fibre Probe 1-channel, 25 kHz. The A100-1 set is used for oscillating analog signals under EFT/ESD/RF interference. The optical signals are transmitted via a fibre optical cable to the optical receiver which then transforms them into electrical signals.
Langer EMV OSE 150-2 Set Optical Fiber (Fibre) Probe 2-channel 50Mbps EMC Probes - With the OSE 150-2 set it is possible to potentially free oscilloscograph digital signals under EFT/burst interference. Disturbed signals from the device under test can be easily detected. It is connected via two fibre optical cables and two receivers to the oscilloscope.
Langer EMV H3 Set - Magnetic Field Sources (EMC Tools and Probes) - This item is a new set of Langer EMV H3 Set - Magnetic Field Sources. The weak spot will react to the pulse field and malfunctions will be triggered. The field sources have a SMB-output. The connection cable for the field sources is available with a SHV connector (HV SHV-SMB 1 m) or with a Fischer connector (HV FI-SMB 1 m; Fischer connector S103A023).
Langer EMV H2 Set - Magnetic Field Sources (EMC Tools and Probes) - This item is a new set of Langer EMV H2 Set - Magnetic Field Sources. The included field sources of the H2 set allow for the coupling of puls fields (on basis EN 61000-4-4). This set consists of: 1xBS 02-h, Magnetic Field Source.
Langer EMV LF1 Set Near-Field RF Probes 100 kHz to 50 MHz H-Field EMC Tools - This item is a new Langer EMV LF1 Set Near-Field Probes 100 kHz up to 50 MHz. First, the electromagnetic interference of the assembly is detected by the LF-R 400 probe from up to 10 cm. Probes with higher resolution like the LF-B 3, LF-U 5 and LF-U 2.5 are then used to more precisely detect any source of interference.
Langer EMV RF3 Mini Set Near-Field Probes 30 MHz up to 3 GHz EMC Tools - This item is a new Langer EMV RF3 Mini Set Near-Field Probes 30 MHz up to 3 GHz. Field orientation and field distribution on an electronic assembly can be detected by special guidiance of the near field probe.
Langer EMV RF2 Set Near-Field Probes 30 MHz up to 3 GHz EMC Tools and Probes - The probe heads of the RF2 set allow for the step by step localization of RF magnetic-field interference sources on assemblies. The RF-R 400-1 and RF-R 50-1 probes can detect electromagnetic interference from greater distances.
Langer EMV RF1 Set Near-Field Probes 30 MHz up to 3 GHz EMC Tools and Probes - An electronic assembly´s field orientation and field distribution can be detected through specific use of the near-field probe. The near field probes are small and handy. They have a current attenuating sheath and, therefore, are electrically shielded.
Langer EMV XF1 Set Near-Field Probes 30 MHz up to 6 GHz EMC Tools and Probes - Due to their integrated impedance matching, the probes are less sensitive in the lower frequency range than the RF-type probes. The probe heads of the XF1 set allow for the step by step localization of magnetic-field interference sources on assemblies.
Langer EMV SX1 Set Near-Field Probes 1 GHz up to 10 GHz EMC Tools and Probes - An electronic assembly’s field orientation and field distribution can be detected through specific use of the near-field probe. The near-field probes are small and handy. They have a current attenuating sheath and, therefore, are electrically shielded.
Langer EMV ESA1 Set Emission Development System (EMC Tools and Probes) - The CS-ESA software allows the developer to quickly and comprehensively suppress interference affecting the DUT. ESA1 is designed for use at the developer's working place. This set consists of. a ESA1 Set User Manual.
Langer EMV P1 Set - Mini Burst Field Generators EMC Tools and Probes - This item is a new Langer EMV P1 Set - Mini Burst Field Generators (Probes). The mini burst field generators are particularly small. They generate a burst or an ESD field at their tip. The weak points respond to the pulsed field and malfunctions will occur.
Langer EMV E1 Set - Immunity Development System (EMC Tools and Probes) - The developer can use the E1 set to quickly identify the causes of burst and ESD interference. The E1 test set-up is small and fits easily on a developer's desk. The E1 set includes a generator to generate burst and ESD disturbances.
NEW Keysight N2802A 25GHz InfiniiMax III Series Probe Amplifier - MFG CALIBRATED - A proprietary 200 GHz fT InP (indium phosphide) IC process with backside ground vias and novel thick film technology is utilized for the InfiniiMax III probe system to accommodate your highest performance needs and is unmatched by any product in the market.
Avex API Series 1.5 Meter 510 Oscilloscope Probe 1X w/ Bannana Tip - The probes feature a snap on replaceable rotating ground lead and a bannana heavy duty tip. The API series 510 probe is fast becoming a favorite of leading manufacturers. Avex Probes combine accuracy, high performance and durability.
RF Active Probe 0.1 - 500 MHz with AD8307 detector - This lot includes assembled and well tested RF probe with AD8307 detector PCB. Even old marker pen will be ok. Also you can use this probe with NWT boxes and for many other useful things. Working frequency: 0.1-500 MHz.
1set High Frequency Response DTL TTL and CMOS LOGIC PROBE LP-1 - For DTL, TTL and CMOS. For TTL and DTL, set the upper select switch to the side marked "TIL". The LEDs will indicate is basic state. After use, reset logic probe by setting the lower select switch back to side marked "PULSE".
Dranetz BMI 656-XD-1003 RF Probe for 658 Analyzer - Image is for reference only; colors may vary. Will Call is encouraged for. Do not ask for any changes to tariff codes or product value. Santa Clara . 3051 Corvin Drive. Credit cards require approval on a case by case basis.
Tektronix P6106 10X Voltage Probe - It has a bandwidth of dc to 30MHz, input cap of 15-24pF and input resistance of 1Mohm. The unit it is being sold with a.
2 pcs. NEW Tektronix TPP0201 200MHz Probe For TDS2014C/P2220 - NEW Tektronix TPP0201 200MHz Probe. This sale is for one pair (2 ea.). of Tektronix TPP0201 200MHz probe. TPP0201 is standard probe of Tektronix TDS2000C series oscilloscopes. Probe Length. 300 V CAT II.
*NEW* Fluke 85RF High Frequency Probe 500 MHZ - Conversion from AC to DC is accomplished on a one-to-one basis includes a range of 0.25 to 30V rms. Ratio Accuracy (At 25 MHz and loaded with 10 M ohm) Above 0.5V: +/- 0.5 dB | Below 0.5V: +/- 1.0 dB | Add +/- 0.2 dB in RF fields of 1 to 3 V/m.