Used Once*Greenlee No. 7306 Knockout Punch Set w/ Hydraulic Hand Pump 767 - This Greenlee No. 7306 Knockout Punch Set comes with a Hydraulic Hand Pump 767, perfect for your next business or industrial project. The set has only been used once and is in top-notch condition. It includes knockouts and punch sets for various hand tools, making it a versatile addition to your equipment. The brand is known for its quality products, and this set is no exception. Don't miss out on this opportunity to enhance your tools collection. Grandpop got it foe special reason while restoring a car then it sat on the shelf, the set is in the wrapper
TH0397 – Manual Knockout Punch Driver Kit for ½ Inch to 1-1/4” Inch Electrical C - Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works for use in tight areas. Manual drive knockout punches, for use with ratchet, wrench, or electric driver.
TEMCo TH0390 – Manual Knockout Punch Driver Kit (Set) for ½ inch to 2 inch El... - When you release the dies, the cast off slug bits simply fall out, and you're ready to move on to your next hole. 3/4", 1", 1-1/4", 1-1/2", 2" die sets compatible with THA001 draw stud allowing for use in TEMCo hydraulic drivers TH0004 and TH0037.
10 Ton 1/2" to 2" Hydraulic Knockout Punch Driver Tool Kit With 6 Dies - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) Features:.
10 Ton Hydraulic Knockout Hole Punch Driver Kit 1/2 to 2 inch with 6 Dies - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) Features: 6 Dies & Punches Interchangeable to Meet Different Needs.
LABLT 10 Ton Hydraulic Knockout Punch Driver 1/2" to 2" With 6 Dies Tool Kit - Specifics and features: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) 6 Dies & Punches Interchangeable to Meet Different Needs Rotatable ON / OFF Switch for More Safety.
LABLT Hydraulic Knockout Punch Driver 10 Ton 1/2" to 2" With 6 Dies Tool Kit - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Max Pressure:10 ton 6 × Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 × Draw Studs: 3.1"L × 0.31"Diam & 3.2"L × 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) 6 Dies & Punches Interchangeable to Meet Different Needs Rotatable ON / OFF Switch for More Safety.
10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies - This 10-ton hydraulic punch driver kit features hydraulic mechanism for powerful drilling holes on different material such as steel and stainless steel. It comes with 6 sets of interchangeable dies & punches of 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" for any installation and repairment on wire pipelines and instruments in metallurgy, petrol, electronics, etc.
10 Ton 6 Dies Hydraulic Knockout Punch Driver Kit Hand Pump Hole Tool Metal Case - 10-ton Hydraulic Punch Driver Kit features a highly efficient hydraulic mechanism with high accuracy and speed, suitable for punching iron up to 11 gauge thick, or stainless steel up to 16 gauge thick. It is ideal for drilling holes on stainless steel, iron, steel, aluminum, plastic, etc.
Yessources 6 Ton Knockout Puncher Tool Kit 6 Punch Dies 1/2 to 2 Inch Repairing - 6 Ton Manual Knockout Hole Punch Driver Kit consists of 1 wrench, 1 sleeve, 2 draw studs, 6 punches, and 1 carrying case. With 6 punch sizes including 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" and a long wrench, it's easy to punch holes in mild steel up to 10 gauge, aluminum, fiberglass, and plastics.
Hydraulic Knockout Punch Driver Kit 6 Ton 6 Dies Hand Pump Hole Tool 11-gauge - Complete Punch Tools - Hydraulic punch tool kit features 1pc 6-ton pump, 2pcs draw studs, 1 set of spacers and 6 sets of interchangeable dies & punches for conduit fitting size of 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2", can drill different sizes holes on stainless steel, aluminum, steel, plastic, etc; 1/8” (11 gauge) max punching thickness for steel and 1/16” (14 gauge) for stainless steel, perfect to be used for different drilling projects.
Hydraulic Knockout Punch Driver Kit 15 Ton 10 Dies 11 14 Gauge Conduit Hole Tool - This 15-ton hydraulic punch driver kit features hydraulic mechanism for powerful drilling holes on different material such as steel and stainless steel. It comes with 10 sets of interchangeable dies & punches of 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 3 1/2" and 4" for any installation and repairment on wire pipelines and instruments of construction sites, metallurgy, petrol, electronics, etc.
Hydraulic Knockout Punch Driver Kit 15 Ton 10 Dies Conduit Hole Tool 11 14 Gauge - This 15-ton hydraulic punch driver kit features hydraulic mechanism for powerful drilling holes on different material such as steel and stainless steel. It comes with 10 sets of interchangeable dies & punches of 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 3 1/2" and 4" for any installation and repairment on wire pipelines and instruments of construction sites, metallurgy, petrol, electronics, etc.
9 Ton 6 Dies Hydraulic Knockout Punch Driver Kit Hand Pump Hole Tool Free Case - This 9-ton hydraulic punch driver kit features hydraulic mechanism for powerful drilling holes on different material such as steel and stainless steel. It comes with 6 sets of interchangeable dies & punches of 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" for any installation and repairment on wire pipelines and instruments of metallurgy, petrol, electronics, etc.
9 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies - This 9-ton hydraulic punch driver kit features hydraulic mechanism for powerful drilling holes on different material such as steel and stainless steel. It comes with 6 sets of interchangeable dies & punches of 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" for any installation and repairment on wire pipelines and instruments of metallurgy, petrol, electronics, etc.
15 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 10 Dies - This 15-ton hydraulic punch driver kit features hydraulic mechanism for powerful drilling holes on different material such as steel and stainless steel. It comes with 10 sets of interchangeable dies & punches of 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 3 1/2" and 4" for any installation and repairment on wire pipelines and instruments of construction sites, metallurgy, petrol, electronics, etc.
6 Dies 6 Ton Hydraulic Knockout Punch Driver Kit Hand Pump Hole Tool 11-gauge - 6 dies & punches interchangeable to meet different needs. Plastic grip at the end of the long handle. On/off switch for more safety. Portable plastic case for convenient traveling. Cylinder can be rotated 360 degrees. Click for Full Description.
15 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 10 Dies - This 15-ton hydraulic punch driver kit features hydraulic mechanism for powerful drilling holes on different material such as steel and stainless steel. It comes with 10 sets of interchangeable dies & punches of 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 3 1/2" and 4" for any installation and repairment on wire pipelines and instruments of construction sites, metallurgy, petrol, electronics, etc.
Greenlee 7304 KnockOut Punch & Die 2-1/2”-4” 7306 7310 ED4U #3204 - (Greenlee 7304 KnockOut Punch & Die 2-1/2”-4” 7306 7310. Excellent preowned condition. :) ELECTRICDEALSFORYOU #3204 SHELF: 4-C. I am happy to drive to catch the Regional Truck if necessary; mileage fee will apply.
10T Hydraulic Knockout Punch Driver Kit 6 Die Conduit 1/2 to 2 Hole Punch Tool - 10-ton Hydraulic Punch Driver Kit features a highly efficient hydraulic mechanism with high accuracy and speed, suitable for punching iron up to 11 gauge thick, or stainless steel up to 16 gauge thick. It is ideal for drilling holes on stainless steel, iron, steel, aluminum, plastic, etc.
Metal Hole Punch, Portable 6 Ton Hydraulic Hole Punching Machine Kit with 4 Dies - Description This hydraulic hole punching machine is made of high-quality steel and plastic, which is strong, durable, and not easy to deform. It has a tonnage of 6T/13227.7lbs, which is large enough to meet your daily needs. It is suitable for processing stainless steel tubes within 1 mm/0.03inch and iron plates within 1.5 mm/0.05inch.
Metal Hole Punch, Portable 6 Ton Hydraulic Hole Punching Machine Kit with 4 Dies - Description This hydraulic hole punching machine is made of high-quality steel and plastic, which is strong, durable, and not easy to deform. It has a tonnage of 6T/13227.7lbs, which is large enough to meet your daily needs. It is suitable for processing stainless steel tubes within 1 mm/0.03inch and iron plates within 1.5 mm/0.05inch.
ECLIPSE 902-481 Knockout Punch Set,10 Pieces,10ga. Steel - Knockout Punch Set,10 Pieces,10ga. Grainger reserves the right to accept or reject any order. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Diversion contrary to U.S. law is prohibited.
ECLIPSE 902-482 Knockout Punch Set,10 ga. Steel Capacity - Knockout Punch Set,10 ga. Steel Capacity. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited.
10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies - 10-ton Hydraulic Punch Driver Kit features a highly efficient hydraulic mechanism with high accuracy and speed, suitable for punching iron up to 11 gauge thick, or stainless steel up to 16 gauge thick. It is ideal for drilling holes on stainless steel, iron, steel, aluminum, plastic, etc.
Milwaukee 2677-23 M18 FORCE LOGIC 6 Ton Knockout Tool Kit (1/2"-4") - The M18™ FORCE LOGIC™ 6 Ton Knockout Tool carries these benefits forward to service applications. It is powerful enough to punch up to 4” holes in 14 gauge mild steel and 40% lighter weight. The EXACT™ punches and dies are rated for both mild and stainless steel punching.
10 Ton Hydraulic Knockout Punch Hole Driver Kit Complete Tool Set with 6 Dies - Yescom 10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies. [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
Manual Knockout Punch Driver Kit for 1/2 Inch to 1-1/4 Inch Electrical Conduit H - Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works for use in tight areas. Style (Conduit Hole Size) 1/2"~1-1/4" Knockout Punch kit.
Yescom 6 Ton Manual Knockout Hole Punch Driver Kit 1/2" to 2" 6 Dies Hole Cutter - 6 Ton Manual Knockout Hole Punch Driver Kit consists of 1 wrench, 1 sleeve, 2 draw studs, 6 punches, and 1 carrying case. With 6 punch sizes including 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" and a long wrench, it's easy to punch holes in mild steel up to 10 gauge, aluminum, fiberglass, and plastics.
VEVOR 15 Ton Hydraulic Knockout Punch Driver Kit Hole Tool 1/2"-4" with 10 Dies - Comfort at its finest: Punch with ease and comfort using our user-friendly knockout set! The convenient "on/off" knob on the pump allows for quick pressure release after drilling. The anti-skid plastic grip at the end of the handle provides a comfortable grip while you work.
Greenlee 767 Splitter Hydraulic Knockout Punch Set - This hydraulic knockout and punch set from Greenlee is a powerful tool for your business and industrial needs. With its 7506 model and high-quality construction, you can trust this tool to get the job done right. Whether you need to create holes for conduit, pipes, or other applications, this set is perfect for the job.The set includes a variety of knockout punches and dies, as well as a hydraulic pump and ram. It's designed to work with a wide range of materials, including steel, aluminum, and plastic. So if you're looking for a reliable, durable, and versatile knockout and punch set, look no further than the Greenlee 767 Splitter.
Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
Temco TH0390 – Manual Knockout Punch Driver Kit (Set) for ½ Inch to 2 Inch Elect - Item model number TH0390. Part Number TH0390. 3/4", 1", 1-1/4", 1-1/2", 2" die sets compatible with THA001 draw stud allowing for use in TEMCo hydraulic drivers TH0004 and TH0037. We believe that any DIYer or professional who works with their hands is doing honorable work and so we do our best to respect the trade or craft.
Lot Of Antique/Vintage Greenlee Knockout Punches-Lots Of Different Sizes 61.5 MM - Lot Of Antique/Vintage Greenlee Knockout Punches-Lots Of Different Sizes 61.5 MM. These belonged to my grandfather. What you see is exactly what you will receive. They are all Greenlee brand. My grandfather was meticulous about his tools. These are in great shape. Your Item(s) will be packed and shipped with care the way I would want to receive them.Thanks for looking and check out my other listings! I have a variety of items you might be interested in!
7646 Ram and Hand Pump Hydraulic Driver Kit - Item model number 7646. Part Number 7646. Included Components, 7646, 11 ton, 746, 746A, ram, ram and pump, hand pump, ram and hand pump, manual-hydraulic, manual-hydraulic knockout, knockout kit, knockout, knock out, knock-out, tool, draw stud, pipe, conduit, mild steel, stainless steel.
10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool W/ 6 Dies - [Complete Set]: This 10-ton Hydraulic Punch Driver Kit features a 10-ton pump, 2 draw studs, a piston shaft, 2 spacers and 6 sets of interchangeable dies and punches, designed to fit 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, enabling hole drilling on stainless steel, iron, steel, aluminum, plastic, etc.
10 Ton Hydraulic Knockout Punch Hole Driver Kit Complete Tool Set with 6 Dies - Yescom 10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies. [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
Temco TH0390 – Manual Knockout Punch Driver Kit (Set) for ½ Inch to 2 Inch Elect - 3/4", 1", 1-1/4", 1-1/2", 2" die sets compatible with THA001 draw stud allowing for use in TEMCo hydraulic drivers TH0004 and TH0037. We believe that any DIYer or professional who works with their hands is doing honorable work and so we do our best to respect the trade or craft.
Dottie RPTK Ratcheting Punch Knockout Tool Kit 10 Piece Set - Dottie RPTK Ratcheting Punch Knockout Tool Kit 10 Piece Set. This item is preowned and shows signs of normal wear and use in the form of scratches and scuffing throughout the body of the components of the kit in the form of scratches and scuffing consistent with signs of normal day to day use. What you see in the pictures is what you get. Nothing more is included. Please check out all of the great pictures of different angles for any questions or doubts about the condition of the item.
Electric Hydraulic Hole Puncher Steel Plate Hole DIY Punching Machine 5krpm 110V - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
Greenlee 18V Intelli-Punch 11-Ton Knockout Punch Kit (LS100X) - Used greenlee intel punch knocket set. What you see in the pictures is what you get. Bought at a local auction from a business that went under it seems like both batteries hold charge. Tool powers in and the relieve button works but is unfurther tested. Feel free to ask any questions and I’ll do my best to answer them and check out my other listings
Greenlee 7310 1/2 to 4 inch Hydraulic Knock Out Punch Set - — Greenlee 7310 1/2 to 4 inch Hydraulic Knock Out Punch Set in good working condition, does not come with the 1/2 cutter side, the metal case does not latch( missing) pictures are part of Description which shows what is included only and overall condition — shipped ups or FedEx with no returns
1800W Hydraulic Hole Puncher Electric Hydraulic Hole Punching Tool Hole Digger - Specification Material: Aluminium, Plastic, Iron Surface Treatment: Painting, Paint Baking Motor Type: Pure Copper Color: Blue, Black Assembly Required: Yes Mount Type: Countertop Control Model: Switch, Hydraulic, Electric Oil Type: Ordinary Oil Plug Type: US Standard Style: Angle Style Model: MY2066 Power: 1800W Voltage: 110V 50/60Hz Power Output: 16T/35273.96lbs Speed: About 5000rpm Pedal Switch Cord Length: About 1.5m/4.92ft Power Cord Length: About 2m/6.56ft Continuous Working Hours: 4-5 Hours Throat Depth: 65mm/2.56inch Suitable Maximum Thickness: 8mm/0.31inch Suitable Material: 3-8mm/0.12-0.31inch Copper Bars and Aluminum Plates, 3-6mm/0.12-0.24inch Iron Bars and Steel Plates, 4-6 # Angle Steel Number of Items: 1 Number of Dies: 5 Sets(10 Pcs).
Southwire MPHSP MAX PUNCH HSP Hydraulic Stud Punch 7/8" 1-11/32" - You are bidding on a previously owned and in good working condition Southwire MPHSP MAX PUNCH HSP Hydraulic Stud Punch. This auction is for the punch with two dies and case you see pictured. No hex wrench included. You will need one to change the die. Nothing else included. It comes as pictured. Please take a moment to look at the pictures and assess the tool. It has some scratches from normal use. There are some personal markings on the case. It has been tested and is in good working condition. Please take a moment to check out my other great items! Thanks ccloan.
Greenlee 767 Hydraulic Knockout Punch Driver & Hand Pump With Some Accessories - Greenlee 767 knockout set. The pump takes a while to build pressure but does work. The bottom of the pump has a very slow leak under pressure. I filled it with fresh hydraulic oil to test and it may just need bled to remedy the pressure issue. Comes with the standard knock out dies that are included with the kit plus 2 larger ones - 3.5" and 3".
Pittsburgh Automotive 14 Piece Hydraulic Punch Driver Kit 96718 - Please be sure to examine the photos of the item that are provided to be certain that the item is not only what you are interested in purchasing but that is also of the quality and condition that you desire before purchasing.If you need to know more about the item, such as details about its condition, what is (or is not) included, please contact me before purchasing the item. Depending on the item I may be able to provide additional photos or information to help you with your decision. I will respond in a timely manner.Payment must be received within 2 days of purchase. A case will automatically be opened after 2 days of non payment.
Hydraulic Knockout Punch Driver Kit w/ 10 Dies Carbon Steel Sheet Hole Opener - Comfort at its finest: Punch with ease and comfort using our user-friendly knockout set! The convenient "on/off" knob on the pump allows for quick pressure release after drilling. The anti-skid plastic grip at the end of the handle provides a comfortable grip while you work.
10 Ton Hydraulic Knockout Punch Hole Driver Kit Complete Tool Set with 6 Dies - Yescom 10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies. [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
Manual Knockout Punch Driver Kit for 1/2 inch to 1-1/4 inch Electrical Condui... - Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works for use in tight areas. Manual drive knockout punches, for use with ratchet, wrench, or electric driver.
With 6 Dies Hole 10Ton 1/2" to 2" Hydraulic Knockout Punch Driver Tool Kit New - Specifications: Punching Die Material: Steel Stroke: 25 Mm / 1" Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22mm), 1.115" (27.5mm), 1.362" (34mm), 1.701"(43mm), 1.951"(49mm), 2.416"(60mm) Punches materials: Steel, stainless steel, brass, copper, aluminum (soft alloys only, not for use with 7075 or other superalloys), fiberglass, plastic, and more. Product Description:.
TEMCo 2" HYDRAULIC KNOCKOUT PUNCH Electrical Conduit Hole Cutter Set KO Tool Kit - TEMCo TH0004 - 2" HYDRAULIC KNOCKOUT PUNCH KIT This listing is for a new, never-used tool -- Professionally inspected and tested to be 100% fully functional. May contain cosmetic blemishes but is in mechanically new condition and never been used. SPECIFICATIONS TEMCo ID: TH0004 Type: Hydraulic Knockout Punch Punch Dies Included (Conduit Fitting Size): ", ", 1", 1 ", 1 ", 2" Conduit Size vs Measured Hole Sizes: " - 0.887" " - 1.118" 1" - 1.365" 1 " - 1.705" 1 " - 1.939" 2" - 2.
Temco 4"Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool Kit - Reconditioned. 100% complete and fully functional. Case may have scuff marks, discoloration, scratches and dents that may occur during shipping of a heavy item. The tool may have some cosmetic scratches and marks that in no way affect the operation of the tool. Listing photos show the condition of representative tools you will receive one similar to these. SPECIFICATIONS TEMCo ID: TH0037 Type: 1/2 to 4 Inch Hydraulic Knockout Punch Punch Dies Included (Conduit Fitting Size): ", ", 1", 1 ", 1 ", 2", 2 ", 3", 3 ", 4" Conduit Size vs Measured Hole Sizes: " - 0.887" " - 1.118" 1" - 1.365" 1 " - 1.705" 1 " - 1.939" 2" - 2.420" 2 " - 2.908" 3" - 3.531" 3 " - 4.024" 4" - 4.
THA010 Long Metric Knock Out Punch Draw Stud M20 X 1.5Mm Thread - TEMCo ID: THA010. We're constantly improving our products, and our hydraulic knockout punches have gone through a few iterations over the years. Check out our quick selection help guide in the image gallery.
Greenlee 7235BB Slug Buster Punch Set 6 Piece - Introducing the Greenlee 7235BB 3 "2" 1 1/2"(6) piece Slug Buster Punch Set, a high-quality hand tool made in the United States. This set is perfect for those in the Business & Industrial industry who need to create knockout and punch sets quickly and easily. With its Greenlee brand name, you can trust that this punch set is durable and reliable. The model number 7235BB ensures that you are getting the exact tool you need. This hydraulic knockout and punch set falls under the Light Equipment and Tools category, making it an essential item for your toolkit.
1800W Hydraulic Hole Puncher Electric Hydraulic Hole Punching Tool Hole Digger - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Power: 1800W. 1 Electric Hydraulic Hole Puncher. Pedal Switch Cord Length: About 1.5m/4.92ft.
Portable Metal Hole Digger Hydraulic Hole Punching Device Hydraulic Punch Kit US - Description This hydraulic hole punching machine is made of high-quality steel and plastic, which is strong, durable, and not easy to deform. It has a tonnage of 6T/13227.7lbs, which is large enough to meet your daily needs. It is suitable for processing stainless steel tubes within 1 mm/0.03inch and iron plates within 1.5 mm/0.05inch.
Electric Hydraulic Hole Puncher Steel Plate Hole DIY Punching Machine 5000 rpm - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
Portable Metal Hole Digger Hydraulic Punch Kit Hydraulic Hole Punching Device US - Description This hydraulic hole punching machine is made of high-quality steel and plastic, which is strong, durable, and not easy to deform. It has a tonnage of 6T/13227.7lbs, which is large enough to meet your daily needs. It is suitable for processing stainless steel tubes within 1 mm/0.03inch and iron plates within 1.5 mm/0.05inch.
Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
Greenlee Textron 23892 800 Hydraulic Cable Bender - Introducing the Greenlee Textron 23892 800 Hydraulic Cable Bender, a powerful tool designed to make cable bending an effortless task. With its superior capabilities, this hydraulic cable bender is a must-have for anyone looking to bend cables of different sizes and shapes.
1800W Hydraulic Hole Puncher Electric Hydraulic Hole Punching Tool Hole Digger - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Power: 1800W. 1 Electric Hydraulic Hole Puncher. Pedal Switch Cord Length: About 1.5m/4.92ft.
Portable Metal Hole Digger Hydraulic Hole Punching Device Hydraulic Punch Kit US - Description This hydraulic hole punching machine is made of high-quality steel and plastic, which is strong, durable, and not easy to deform. It has a tonnage of 6T/13227.7lbs, which is large enough to meet your daily needs. It is suitable for processing stainless steel tubes within 1 mm/0.03inch and iron plates within 1.5 mm/0.05inch.
GREENLEE 7646 Hand Pump Hydraulic Driver - GREENLEE 7646. Hand Pump Hydraulic Driver, Number of Pieces 1, Capacity 10 ga Steel, Workpiece Material Mild Steel, For Use With Punch Sizes: 1/2 to 4 in, Includes Driver with Hand Pump, Draw Studs, Spacers and Plastic Case.
GREENLEE 7706SB Hydraulic Punch Driver Set,10 - GREENLEE 7706SB. Hydraulic Punch Driver Set, Number of Pieces 10, Capacity 10 ga Steel, Conduit and Pipe Size 1/2 in to 2 in, Workpiece Material Mild Steel, Driver Angle 90 Degrees, For Use With Quick Draw Flex Driver, Includes Quick Draw Hydraulic Driver, 1/2 in 1, 1-1/4, 1-1/2, 2 in Slug Buster Punches and Dies, (2) Draw Studs, (1) Adapter, (1) Spacer and Plastic Carrying Case.
TEMCo TH0390 – Manual Knockout Punch Driver Kit (Set) for ½ inch to 2 inch Elect - When you release the dies, the cast off slug bits simply fall out, and you're ready to move on to your next hole. 3/4", 1", 1-1/4", 1-1/2", 2" die sets compatible with THA001 draw stud allowing for use in TEMCo hydraulic drivers TH0004 and TH0037.
Greenlee Dsbb-3/4 3/4 In Knock Out Draw Stud - Knock Out Draw Stud. Watts 2 Lf007m1-Qt-S Double Check Valve Assembly,Watts 007. Boston H10012-50 Hydraulic Hose,50 Ft. L,1-1/32 In. Hubbell Wiring Device-Kellems Hbli25123 Cord Reels Hbli25123. & Recepticles.
Metal Hole Punch, Portable 6 Ton Hydraulic Hole Punching Machine Kit with 4 Dies - Description This hydraulic hole punching machine is made of high-quality steel and plastic, which is strong, durable, and not easy to deform. It has a tonnage of 6T/13227.7lbs, which is large enough to meet your daily needs. It is suitable for processing stainless steel tubes within 1 mm/0.03inch and iron plates within 1.5 mm/0.05inch.
TEMCo Hydraulic Knockout Punch TH0004 - Electrical Conduit Hole Cutter Set KO - 6 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2". Install the correct punch mandrel on the hydraulic cylinder along with the female portion of the punch die. Insert the punch mandrel through your drilled hole in the panel.
TEMCo Hydraulic Knockout Punch TH0004 - Electrical Conduit Hole Cutter Set KO - 6 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2". Install the correct punch mandrel on the hydraulic cylinder along with the female portion of the punch die. Insert the punch mandrel through your drilled hole in the panel.
Electric Hydraulic Hole Puncher Hole Cutter Steel Plate Hole Punching Machine - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
Electric Hydraulic Hole Puncher Hole Cutter Steel Plate Hole Punching Machine - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
1800W Hydraulic Hole Puncher Electric Hydraulic Hole Punching Tool Hole Digger - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Power: 1800W. 1 Electric Hydraulic Hole Puncher. Pedal Switch Cord Length: About 1.5m/4.92ft.
1800W Hydraulic Hole Puncher Electric Hydraulic Hole Punching Tool Hole Digger - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Power: 1800W. 1 Electric Hydraulic Hole Puncher. Pedal Switch Cord Length: About 1.5m/4.92ft.
Electric Hydraulic Hole Puncher Hole Cutter Steel Plate Hole Punching Machine - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
1800W 110V Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine US - 110V Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine 1800W with 5 Set Dies. A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently.
110V Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine+5 Set Die - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
Electric Hydraulic Hole Puncher Hole Cutter Steel Plate Hole Punching Machine - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
65mm 110V Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine New - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
Electric Hydraulic Hole Puncher Hole Cutter Steel Plate Hole Punching Machine - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
Electric Hydraulic Hole Puncher Steel Plate Hole DIY Punching Machine 5krpm 110V - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
1800W Hydraulic Hole Puncher Electric Hydraulic Hole Punching Tool Hole Digger - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Power: 1800W. 1 Electric Hydraulic Hole Puncher. Pedal Switch Cord Length: About 1.5m/4.92ft.
New 10Ton 1/2" to 2" With 6 Dies Hole Hydraulic Knockout Punch Driver Tool Kit - Specifications: Punching Die Material: Steel Stroke: 25 mm / 1" Max pressure: 10 Ton Total weight: 11 kg/25 lbs Dimension: 430X260X260 mm/17X10X10 inch Max thickness for steel: 3.2 mm/0.13 inch/11 ga Max thickness for stainless steel: 2 mm/0.08 inch/13 ga Punch Dies: 22mm,27.5mm,34mm,43mm,49mm,60mm Punches materials: Steel, stainless steel, brass, copper, aluminum (soft alloys only, not for use with 7075 or other superalloys), fiberglass, plastic, and more. Product Description:.
1/2 Inch - 2 Inch 10 Ton Hydraulic Knockout Punch Driver Tool Kit With 6 Dies - Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22mm), 1.115" (27.5mm), 1.362" (34mm), 1.701"(43mm), 1.951"(49mm), 2.416"(60mm) Features:.
Findmall 10 Ton 1/2" - 2" With 6 Dies Hydraulic Knockout Punch Driver Tool Kit - Specification: Punching Die Material: Steel Stroke: 25 mm / 1" Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22mm), 1.115" (27.5mm), 1.362" (34mm), 1.701"(43mm), 1.951"(49mm), 2.416"(60mm) Punches materials: Steel, stainless steel, brass, copper, aluminum (soft alloys only, not for use with 7075 or other superalloys), fiberglass, plastic, and more. Feature:.
10 Ton 1/2 Inch - 2 Inch With 6 Dies Hydraulic Knockout Punch Driver Tool Kit - Feature: Punching Die Material: Steel Stroke: 25 mm / 1" Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22mm), 1.115" (27.5mm), 1.362" (34mm), 1.701"(43mm), 1.951"(49mm), 2.416"(60mm) Punches materials: Steel, stainless steel, brass, copper, aluminum (soft alloys only, not for use with 7075 or other superalloys), fiberglass, plastic, and more. Description: Hydraulic Mechanism 10T.
110V Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine 1800W New - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Power: 1800W. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
110V Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine 1800W New - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Power: 1800W. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
Electric Hydraulic Hole Puncher Hole Cutter Steel Plate Hole Punching Machine - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
Metal Hole Punch, Portable 6 Ton Hydraulic Hole Punching Machine Kit with 4 Dies - Description This hydraulic hole punching machine is made of high-quality steel and plastic, which is strong, durable, and not easy to deform. It has a tonnage of 6T/13227.7lbs, which is large enough to meet your daily needs. It is suitable for processing stainless steel tubes within 1 mm/0.03inch and iron plates within 1.5 mm/0.05inch.
Metal Hole Punch, Portable 6 Ton Hydraulic Hole Punching Machine Kit with 4 Dies - Description This hydraulic hole punching machine is made of high-quality steel and plastic, which is strong, durable, and not easy to deform. It has a tonnage of 6T/13227.7lbs, which is large enough to meet your daily needs. It is suitable for processing stainless steel tubes within 1 mm/0.03inch and iron plates within 1.5 mm/0.05inch.
10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies - [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
Electric Hydraulic Hole Puncher Steel Plate Hole DIY Punching Machine 5krpm 110V - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
THA010 Long Metric Knock Out Punch Draw Stud M20 X 1.5Mm Thread - TEMCo ID: THA010. We're constantly improving our products, and our hydraulic knockout punches have gone through a few iterations over the years. Check out our quick selection help guide in the image gallery.
Greenlee LS100X11SBSP4 Intelli-Punch 11-Ton Tool Knock Out 1/2 to 4” 18v - This Greenlee LS100X11SBSP4 Intelli-Punch 11-Ton Tool is a powerful asset for any professional looking to easily knock out holes ranging from 1/2 inch to 4 inches. With a high-quality brand like Greenlee, you can trust that this hydraulic knockout and punch set will get the job done efficiently. The 18v tool is designed with the user in mind, making it easy to handle and use. The model LS100X11SBSP4 offers a reliable solution for those in the business and industrial field who require a dependable tool. Purchase this knock out set today and take your work to the next level.
GREENLEE KnockOut Punch & Die Set 1/2” to 4” With 1 Adapter Read - This Greenlee Conduit KnockOut Punch set is a must-have for anyone in the electrical industry. Made in the United States, this high-quality hydraulic knockout and punch set is ideal for construction and maintenance projects.
Temco TH0390 – Manual Knockout Punch Driver Kit (Set) for ½ Inch to 2 Inch Elect - Item model number TH0390. Part Number TH0390. 3/4", 1", 1-1/4", 1-1/2", 2" die sets compatible with THA001 draw stud allowing for use in TEMCo hydraulic drivers TH0004 and TH0037. We believe that any DIYer or professional who works with their hands is doing honorable work and so we do our best to respect the trade or craft.
Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
1800W Hydraulic Hole Puncher Electric Hydraulic Hole Punching Tool Hole Digger - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Power: 1800W. 1 Electric Hydraulic Hole Puncher. Pedal Switch Cord Length: About 1.5m/4.92ft.
Greenlee 7309Sb Knock Out Driver Kit - Knock Out Driver Kit. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine 1800W 110V New - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Power: 1800W. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
Greenlee 7310 1/2 to 4 inch Hydraulic Knock Out Punch and Die Set - Brand new Greenlee 7310 hydraulic punch driver set. The box has a little bit of cosmetic damage as can be seen in one of the pictures, but everything else is in mint condition. Nothing has been substituted to make it new parts. Everything is original.
Manual Knockout Punch Driver Kit for 1/2 Inch to 1-1/4 Inch Electrical Conduit H - Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works for use in tight areas. Style (Conduit Hole Size) 1/2"~1-1/4" Knockout Punch kit.
Temco TH0390 – Manual Knockout Punch Driver Kit (Set) for ½ Inch to 2 Inch Elect - Item model number TH0390. Part Number TH0390. 3/4", 1", 1-1/4", 1-1/2", 2" die sets compatible with THA001 draw stud allowing for use in TEMCo hydraulic drivers TH0004 and TH0037. We believe that any DIYer or professional who works with their hands is doing honorable work and so we do our best to respect the trade or craft.
Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
Greenlee 7238Sb Slug-Buster Ratchet Wrench Knock Out Set 1/2"-2" - IN box (1) 2" punch and Die (2) 1 1/2" punch and Die (3) 1" punch and Die (4) 3/4" punch (5) Wrench(A). Reference : Box-/3100G no 2. They are not included in the item price. We'll reply as soon as possible.
Hydraulic Knockout Punch Set, 98KN(10 T) Knockout Hole Punch Driver Kit, - It is popular in the electricity industry, installing electrical cabinets and repairing wire pipelines. A hydraulic punch driver will always be there when you need it. Hydraulic Knockout Punch Set. Because of the high-quality HNBR, the oil cylinder has good tightness.
5 Die Set 110V Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
Electric Hydraulic Hole Puncher Steel Plate Hole DIY Punching Machine 5krpm 110V - Description A powerful tool is indispensable in punching work. Made of aluminum, plastic, and iron, and adopting painting and paint baking processes, our electric hydraulic hole puncher lays the foundation for your long-term use. Excellent performance(1800W) allows you to complete your work faster and more conveniently. A simple operation can also save you time. Key Features Build to Last: High-quality plastic, aluminum, iron, painting, and paint baking processes make the whole product solid and durable, so it can better keep practical for a long time. Excellent Performance: The 1800W pure copper motor with less consumption, hydraulic transmission system, 35273.96lbs output force, high-quality impact head, and about 5000rpm rotational speed enable this product to accurately locat.
Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine w/10Dies 1.8KW - Description A powerful tool is indispensable in punching work. Made of aluminum, plastic, and iron, and adopting painting and paint baking processes, our electric hydraulic hole puncher lays the foundation for your long-term use. Excellent performance(1800W) allows you to complete your work faster and more conveniently. A simple operation can also save you time. Key Features Build to Last: High-quality plastic, aluminum, iron, painting, and paint baking processes make the whole product solid and durable, so it can better keep practical for a long time. Excellent Performance: The 1800W pure copper motor with less consumption, hydraulic transmission system, 35273.96lbs output force, high-quality impact head, and about 5000rpm rotational speed enable this product to accurately locat.
Greenlee 7304 punchs and dies knockout set 2-1/2" to 4" no case - Greenlee 7304 punch and dies knockout set 2-1/2", 3", 3-1/2", and 4" no case. and sign of use but fully function. get what you see pictures nothing more nothing less. This is the exact Pis for.
Greenlee 3-1/2" Knock Out Die - This auction is for a Greenlee 3-1/2" Knock Out Die. Comes complete as shown in the pictures. Good luck bidding.
Manual Knockout Punch Driver Kit for 1/2 Inch to 1-1/4 Inch Electrical Conduit H - Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works for use in tight areas. Manual drive knockout punches, for use with ratchet, wrench, or electric driver.
Greenlee 7704 Hydraulic Flex Head Knockout Punch Kit w/ 1/2" - 2" Punches - This Greenlee 7704 Hydraulic Flex Head Knockout Punch Kit is a great addition to your collection of tools. It includes punches ranging from 1/2" to 2" and is perfect for use in various industries. The model number is Greenlee 7704, and it is made in the United States.
TEMCo TRTAZI11A Hydraulic Knockout Punch Tool Set - This high-quality hand tool is designed for efficient and precise punching of holes in a variety of materials, making it ideal for professionals and DIY enthusiasts alike. With its durable construction and user-friendly design, this tool is perfect for knockouts and punch sets.
10 Ton Hydraulic Knockout Punch Hole Driver Kit Complete Tool Set with 6 - Yescom 10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies. [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
, DSH-S3/4 REPLACES 31872, 3/4" Short Hydraulic Draw Stud - Replaces 31872. Included Components 3/4" short hydraulic draw stud. DSH-S3/4 3/4" 3/4" Short hydraulic draw stud. Use with Greenlee Quick draw Hydraulic knockout drivers. Operation Mode Hydraulic. Size 3/4" short.
9 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool W/ 6 Dies - [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 9-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, aluminum, steel, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
9 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool W/ 6 Dies - [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 9-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, aluminum, steel, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool Kit - UTZIKO Hydraulic Electric Conduit Hole Cutter Set Knockout Punch 1/2"-2" KO Tool Kit (8T (1/2"-2")). Knockout Drilling Tool Kit: Standard Outlet Pressure: 8 Ton. Maximum outlet pressure: 12 tons. It is a drill set with a separable hydraulic pump.
Heavy-Duty Hydraulic Knockout Punch Driver Tool Kit - 6 Dies - 1/2" to 2" - Heavy-Duty Hydraulic Knockout Punch Driver Tool Kit. -6 Dies - 1/2" to 2". Durable punching dies and punches set with six sizes (1/2", 3/4", 1", 1-1/4", 1-1/2", and 2"). Our Heavy-Duty Hydraulic Knockout Punch Driver Tool Kit is the perfect choice for professionals and DIY enthusiasts alike.
Greenlee 7306Sb 8 Piece Hydraulic Punch Driver Set, 10 Ga. - The Greenlee 7306SB 8 Piece Hydraulic Punch Driver Set is a must-have for your toolbox. This heavy-duty punch driver set can take on the toughest jobs and keep working through even the most challenging conditions.
9ton Hydraulic Metal Punch Kit Blue - Complete Punch Tools - Hydraulic punch tool kit features 1pc 9-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, aluminum, steel, plastic, etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel, perfect to be used for different drilling projects.
Hydraulic Knockout Punch TH0004 - Electrical Conduit Hole Cutter Set KO - 6 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2". Install the correct punch mandrel on the hydraulic cylinder along with the female portion of the punch die. Insert the punch mandrel through your drilled hole in the panel.
Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool 8T 1/2"~2" - Maximum output pressure 12 tons. It is a knockout punch set with a separable hydraulic pump. It features a good tightness and no oil leakage. With a safety valve, the pressure will release automatically when the pressure reaches the limited max.
Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool 8T 1/2"~2" - Maximum output pressure 12 tons. It is a knockout punch set with a separable hydraulic pump. It features a good tightness and no oil leakage. With a safety valve, the pressure will release automatically when the pressure reaches the limited max.
Eclipse 902-598 10 Piece Hydraulic Punch Driver Set, 10 Ga Steel - It has a capacity of 10 ga steel, which makes it suitable for use on mild steel. The hydraulic punch driver set contains 10 pieces in total, including the 1/2 in to 2 in conduit and pipe size punch driver.
1PC 6 Ton Hydraulic Knockout Punch Driver Kit 6 Dies Hand Pump Hole Tool - 6x dies & punches : 22,27.5,34.3,43,49,60.8. 6x dies & punches. Max pressure: 6 ton. 2x draw stud. 2x draw studs. 1x 6-ton pump. we very glad to solve all problem with you. Portable plastic case for convenient traveling.
189g Puncher Draw Stud with Lock Cap Hydraulic Knockout Accessories - Specification: Material: Iron Color: Black Size: Small tie rod: Thread diameter of 20mm/10mm, length of 98mm Lock cap: 24mm Gasket: 41.5mm Weight: 189g Feature: 1.Note: The diameter of the mold is less than 27.5mm, use a small pull bar. 2.Use: hydraulic hole opener accessories. 3.Every product has a unique manufacturing part number label on the inner package that proves it has been qualified,which include Part Number,model number and inspection date information. Package Include: 1 x Hydraulic Drivers Draw Stud 1 x Lock Cap 1 x Gasket Brand Unbranded MPN Does not apply UPC Does not apply EAN Does not apply Type Knockout Draw Stud.
10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) Features: 6 Dies & Punches Interchangeable to Meet Different Needs.
Hydraulic Knockout Punch Set Hole Knockout Kit 6 Dies 1/2" to 2" 98KN 10T,, - It is popular in the electricity industry, installing electrical cabinets and repairing wire pipelines. A hydraulic punch driver will always be there when you need it. Hydraulic Knockout Punch Set. Because of the high-quality HNBR, the oil cylinder has good tightness.
10ton Hydraulic Metal Punch Kit Yellow - Complete Punch Tools - Hydraulic punch tool kit features 1pc 10-ton pump; 2pcs draw studs; 1pc piston shaft; 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2" and 2" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
9ton Hydraulic Metal Punch Kit Blue - Complete Punch Tools - Hydraulic punch tool kit features 1pc 9-ton pump; 2pcs draw studs; 1pc piston shaft; 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2" and 2" conduit sizes; can drill different sizes holes on stainless steel; aluminum; steel; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
15ton Hydraulic Punch Kit w/ 10 Dies Yellow - Complete Punch Tools - Hydraulic punch tool kit features 1pc 15-ton pump; 2pcs draw studs; 2pcs piston shaft; 2pcs spacers and 10 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2"; 2"; 2 1/2"; 3"; 3 1/2" and 4" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
TH0397 – Manual Knockout Punch Driver Kit for ½ Inch to 1-1/4” Inch Electrical C - Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works for use in tight areas. Manual drive knockout punches, for use with ratchet, wrench, or electric driver.
Greenlee Ls100x11sb Punch Driver Kit,18.0V,Li-Ion,Cordless - Rothenberger 106303 Hole Saw Kit,1/2" X 20, 5/8" X 18 Thread. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
Hydraulic Hole Puncher Electric Hydraulic Hole Punching Tool Hole Digger 1800W - Description A powerful tool is indispensable in punching work. Made of aluminum, plastic, and iron, and adopting painting and paint baking processes, our electric hydraulic hole puncher lays the foundation for your long-term use. Excellent performance(1800W) allows you to complete your work faster and more conveniently. A simple operation can also save you time. Key Features Build to Last: High-quality plastic, aluminum, iron, painting, and paint baking processes make the whole product solid and durable, so it can better keep practical for a long time. Excellent Performance: The 1800W pure copper motor with less consumption, hydraulic transmission system, 35273.96lbs output force, high-quality impact head, and about 5000rpm rotational speed enable this product to accurately locat.
TH0305 Square 45Mm X 45Mm 1/16 DIN Panel Meter Punch Dies 1.772" X 1.772" - This set requires the use of a hydraulic punch ram with a capacity of at least 12 US Tons. Square DIN Punch Die Set for 45mm x 45 mm (1/16 DIN). Draw studs and spacers are included for all of the above specifications.
VEVOR 15 Ton Hydraulic Knockout Punch Driver Kit Hole Tool 1/2"-4" with 10 Dies - VEVOR 10 Ton Hydraulic Knockout Punch Driver Kit 1/2"-2" Conduit Hole 6 Dies. VEVOR Hydraulic Knockout Punch Set Hole Knockout Kit 6 Dies 1/2" to 2" 98KN 10T. VEVOR CH-60 Hydraulic Busbar Hole Puncher 31 Ton Knockout Punch Set Max 10mm.
110V Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine 1800W New - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Power: 1800W. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
Replacement Case for Original TEMCo TH0004 Hydraulic Knockout Punch Driver - TEMCo ID: SP0034. "I have always been delighted with the service from TEMCo. Note: Will NOT fit current versions with slug splitting dies. About TEMCo. any reason. If it fails or breaks for. It is not too often to find service like that!!
Replacement Case for V2.0 TEMCo TH0037 Hydraulic Knockout Punch Driver - Note: Will NOT fit original versions of TH0037. Original version had a product label on the front of the case. This WILL fit current versions of TH0037 that include slug splitting and deep draw punch and dies.
Greenlee LS50L2 Knockout Kit - GREENLEE Gator® Knockout Punch Kit (LS50L). Maximum steel and stainles steel thickness of 12ga.
Temco TH0390 – Manual Knockout Punch Driver Kit (Set) for ½ Inch to 2 Inch Elect - 3/4", 1", 1-1/4", 1-1/2", 2" die sets compatible with THA001 draw stud allowing for use in TEMCo hydraulic drivers TH0004 and TH0037. We believe that any DIYer or professional who works with their hands is doing honorable work and so we do our best to respect the trade or craft.
1/2" to 2" Hand Tool Cutter Driver Kit Conduit Knockout Set - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
US Portable Metal Hole Digger Hydraulic Punch Kit Hydraulic Hole Punching Device - Description This hydraulic hole punching machine is made of high-quality steel and plastic, which is strong, durable, and not easy to deform. It has a tonnage of 6T/13227.7lbs, which is large enough to meet your daily needs. It is suitable for processing stainless steel tubes within 1 mm/0.03inch and iron plates within 1.5 mm/0.05inch.
1800W Hydraulic Hole Puncher Electric Hydraulic Hole Punching Tool Hole Digger - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Power: 1800W. 1 Electric Hydraulic Hole Puncher. Pedal Switch Cord Length: About 1.5m/4.92ft.
TH0305 Square 45mm x 45mm 1/16 DIN Panel Meter Punch Dies 1.772" x 1.772" - This set requires the use of a hydraulic punch ram with a capacity of at least 12 US Tons. Square DIN Punch Die Set for 45mm x 45 mm (1/16 DIN). Draw studs and spacers are included for all of the above specifications.
Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
Manual Knockout Punch Driver Kit for 1/2 Inch to 1-1/4 Inch Electrical Conduit H - Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works for use in tight areas. Manual drive knockout punches, for use with ratchet, wrench, or electric driver.
TEMCo TH0390 – Manual Knockout Punch Driver Kit (Set) for ½ inch to 2 inch Elect - 3/4", 1", 1-1/4", 1-1/2", 2" die sets compatible with THA001 draw stud allowing for use in TEMCo hydraulic drivers TH0004 and TH0037. We believe that any DIYer or professional who works with their hands is doing honorable work and so we do our best to respect the trade or craft.
Greenlee Hydraulic Knockout 767 Hand Pump and Ram - Greenlee Hydraulic Knockout 767 Hand Pump and Ram.. In excellent working condition. I have used it for several years, and am now retired. I have small punches, 3/4 to 2, and 3,3 1/2 and 4 inch punches available. The larger ones are listed. I can make a package rate if you need all. Message me.
Greenlee 7304 Knockout punch set with case - You will receive the exact item(s) shown in the pictures. I usually put a ruler in the pictures for size reference. If I see any defects I will show them (any defects missed are accidental).
6 Ton Manual Knockout Hole Punch Driver Kit 1/2 to 2 Inch 6 Dies Hole Cutter Set - [Smooth Punching]: Slug splitting design punch with 6 tons punching force for smooth punching & easy slug removal, leaving round holes & uniform hole size with clean hole edges. [Complete Hole Cutter Set]: 6 Ton Manual Knockout Hole Punch Driver Kit includes 1 wrench, 1 sleeve, 2 draw studs, 6 punches & 1 carrying case; With 6 punch sizes including 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", it can punch holes in mild steel up to 10 gauge, aluminum, fiberglass & plastics.
IBOSAD Hydraulic Knockout Hole Punch Driver Kit 1/2 to 2 Inch Electrical Conduit - This IBOSAD Hydraulic Knockout Hole Punch Driver Kit is the perfect tool for electrical conduit punching. Made with durable aluminum, it effortlessly punches holes ranging from 1/2 to 2 inches in diameter. The hydraulic operation mode ensures a smooth and easy punching process, making it a reliable tool for any business or industrial setting. The kit includes a WK-8 pattern name and model, ensuring compatibility with various types of conduit. Whether you're a professional or a DIY enthusiast, this punch driver kit is a must-have for any electrical conduit installation project.
GREENLEE 7506 Hydraulic Punch Driver Set,10 ga. SS - GREENLEE 7506. Hydraulic Punch Driver Set,10 ga. Grainger reserves the right to accept or reject any order. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
10 Ton Hydraulic Knockout Punch Hole Driver Kit Complete Tool Set with 6 Dies - Yescom 10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies. [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
1800W Hydraulic Hole Puncher Electric Hydraulic Hole Punching Tool Hole Digger - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Power: 1800W. 1 Electric Hydraulic Hole Puncher. Pedal Switch Cord Length: About 1.5m/4.92ft.
Greenlee 7310SB Knockout Punch Set 1/2" - 4" - Greenlee 7310SB Knockout Punch complete set for 1/2" Thru 4" Conduct size. Greenlee Heavy Duty case. Draw stud 3/4", 1-1/8"adapter for 3-1/2" and up, and 3/8 draw stud for 1/2". 1/2"-2" Slug-buster punch and dies.
Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
Electric Hydraulic Hole Puncher Hole Cutter Steel Plate Hole Punching Machine - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
1800W Hydraulic Hole Puncher Electric Hydraulic Hole Punching Tool Hole Digger - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Power: 1800W. 1 Electric Hydraulic Hole Puncher. Pedal Switch Cord Length: About 1.5m/4.92ft.
Metal Hole Punch, Portable 6 Ton Hydraulic Hole Punching Machine Kit W/4 Dies US - Description This hydraulic hole punching machine is made of high-quality steel and plastic, which is strong, durable, and not easy to deform. It has a tonnage of 6T/13227.7lbs, which is large enough to meet your daily needs. It is suitable for processing stainless steel tubes within 1 mm/0.03inch and iron plates within 1.5 mm/0.05inch.
1800W Hydraulic Hole Puncher Electric Hydraulic Hole Punching Tool Hole Digger - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Power: 1800W. 1 Electric Hydraulic Hole Puncher. Pedal Switch Cord Length: About 1.5m/4.92ft.
Hydraulic Knockout Punch Set, 98KN(10 T) Knockout Hole Punch Driver Kit, 6 - It is popular in the electricity industry, installing electrical cabinets and repairing wire pipelines. A hydraulic punch driver will always be t when you need it. Efficient Hydraulic Design: Our hydraulic knockout hole produces a strong force of 98KN/10T, providing the perfect hole with every punch.
Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool 8T 1/2"~2" - Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency.
1800W Hydraulic Hole Puncher Electric Hydraulic Hole Punching Tool Hole Digger - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Power: 1800W. 1 Electric Hydraulic Hole Puncher. Pedal Switch Cord Length: About 1.5m/4.92ft.
GREENLEE KCC4-767 Knock Out Set - GREENLEE KCC4-767. Knock Out Set. Grainger reserves the right to accept or reject any order. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Diversion contrary to U.S. law is prohibited.
Greenlee 7310 1/2"-4" Hydraulic Knockout And Punch Driver Set - This Greenlee 7310 hydraulic knockout and punch set is ready to help you with your business and industrial needs. The set includes a Greenlee brand tool, known for its reliability and durability. The specific model number is 7310, ensuring compatibility with your needs. Use this tool to easily create knockout holes in a variety of materials, saving you time and effort. This punch set falls under the category of light equipment and tools, specifically hand tools and knockout and punch sets. Add this hydraulic tool to your collection today for a smoother and more efficient work process.
Current Tools 1521 Hydraulic Hand Pump w/1522 Knockout Ram Used Free Shipping - The 1522 knockout ram is designed to work seamlessly with the pump to make punching holes in various materials a breeze. This tool has been used but is still in excellent working condition. Unit was pulled from an active line and should be in good working condition.
Amzcnc Hydraulic Knockout Hole Punch Driver Kit 1/2 To 2 Inch Electrical Conduit - Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass, Plastic Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole.
Portable Metal Hole Digger Hydraulic Hole Punching Device Hydraulic Punch Kit US - Description This hydraulic hole punching machine is made of high-quality steel and plastic, which is strong, durable, and not easy to deform. It has a tonnage of 6T/13227.7lbs, which is large enough to meet your daily needs. It is suitable for processing stainless steel tubes within 1 mm/0.03inch and iron plates within 1.5 mm/0.05inch.
Hydraulic Knockout Hole Punch Driver Kit 1/2 to 2 inch Electrical Conduit Hol... - Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency.
Hydraulic Knockout Hole Punch Driver Kit 1/2 to 2 inch Electrical Conduit Hol... - Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency.
High-Performance Hydraulic Knockout Punch Set - 9 Ton Power - 6 Die Sets - 24 - High-Performance Hydraulic Knockout Punch Set. Look no further than our High-Performance Hydraulic Knockout Punch Set. Why choose our High-Performance Hydraulic Knockout Punch Set?. Don't settle for subpar punch sets - choose our High-Performance Hydraulic Knockout Punch Set and experience the difference in performance and reliability!
New hydraulic punching machine Copper / aluminum / iron row punching machine - Punching capacity: copper and aluminum row below 12mm; iron plate below 10mm. elbow pipe,punching tool, jack, etc. The standard of the mould: 10.5mm, 13.8mm, 17mm, 20mm.5mm. CH-70 Hydraulic P uncher +CP-700 Manual Hydraulic Pump.
6T Manual Hydraulic Metal Sheet Hole Punching Machine 16-25mm Punch Tool US - Description This hydraulic hole punching machine is made of high-quality steel and plastic, which is strong, durable, and not easy to deform. It has a tonnage of 6T/13227.7lbs, which is large enough to meet your daily needs. It is suitable for processing stainless steel tubes within 1 mm/0.03inch and iron plates within 1.5 mm/0.05inch.
110V Portable Electric Hydraulic Hole Puncher Knockout Punch Punching 5 Dies Set - Description A powerful tool is indispensable in punching work. Made of aluminum, plastic, and iron, and adopting painting and paint baking processes, our electric hydraulic hole puncher lays the foundation for your long-term use. Excellent performance(1800W) allows you to complete your work faster and more conveniently. A simple operation can also save you time. Key Features Build to Last: High-quality plastic, aluminum, iron, painting, and paint baking processes make the whole product solid and durable, so it can better keep practical for a long time. Excellent Performance: The 1800W pure copper motor with less consumption, hydraulic transmission system, 35273.96lbs output force, high-quality impact head, and about 5000rpm rotational speed enable this product to accurately locat.
1800W Hydraulic Hole Puncher Electric Hydraulic Hole Punching Tool Hole Digger - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Power: 1800W. 1 Electric Hydraulic Hole Puncher. Pedal Switch Cord Length: About 1.5m/4.92ft.
Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine + 10 Dies 110V - Description A powerful tool is indispensable in punching work. Made of aluminum, plastic, and iron, and adopting painting and paint baking processes, our electric hydraulic hole puncher lays the foundation for your long-term use. Excellent performance(1800W) allows you to complete your work faster and more conveniently. A simple operation can also save you time. Key Features Build to Last: High-quality plastic, aluminum, iron, painting, and paint baking processes make the whole product solid and durable, so it can better keep practical for a long time. Excellent Performance: The 1800W pure copper motor with less consumption, hydraulic transmission system, 35273.96lbs output force, high-quality impact head, and about 5000rpm rotational speed enable this product to accurately locat.
New Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine 1800W 110V - Description A powerful tool is indispensable in punching work. Made of aluminum, plastic, and iron, and adopting painting and paint baking processes, our electric hydraulic hole puncher lays the foundation for your long-term use. Excellent performance(1800W) allows you to complete your work faster and more conveniently. A simple operation can also save you time. Key Features Build to Last: High-quality plastic, aluminum, iron, painting, and paint baking processes make the whole product solid and durable, so it can better keep practical for a long time. Excellent Performance: The 1800W pure copper motor with less consumption, hydraulic transmission system, 35273.96lbs output force, high-quality impact head, and about 5000rpm rotational speed enable this product to accurately locat.
1800W Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine +10 Dies - Description A powerful tool is indispensable in punching work. Made of aluminum, plastic, and iron, and adopting painting and paint baking processes, our electric hydraulic hole puncher lays the foundation for your long-term use. Excellent performance(1800W) allows you to complete your work faster and more conveniently. A simple operation can also save you time. Key Features Build to Last: High-quality plastic, aluminum, iron, painting, and paint baking processes make the whole product solid and durable, so it can better keep practical for a long time. Excellent Performance: The 1800W pure copper motor with less consumption, hydraulic transmission system, 35273.96lbs output force, high-quality impact head, and about 5000rpm rotational speed enable this product to accurately locat.
110V Electric Hydraulic Hole Puncher Steel Plate Machine 1800W Hand Tool KIT - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Power: 1800W. 1 Electric Hydraulic Hole Puncher. Pedal Switch Cord Length: About 1.5m/4.92ft.
1800W Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine 110V New - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Power: 1800W. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
GREENLEE 7806SB Quick Draw Hydraulic Punch Die - IN BOX (1) 1/2" PUNCH 3pc (2) 20.4mm Die 3pc (3) 15.2mm punch and Die (4) 3.7mm punch and Die. Reference : Box-13/1000G no 20. We'll reply as soon as possible.
Electric Hydraulic Hole Puncher Hole Cutter Steel Plate Hole Punching Machine - Description A powerful tool is indispensable in punching work. Made of aluminum, plastic, and iron, and adopting painting and paint baking processes, our electric hydraulic hole puncher lays the foundation for your long-term use. Excellent performance(1800W) allows you to complete your work faster and more conveniently. A simple operation can also save you time. Key Features Build to Last: High-quality plastic, aluminum, iron, painting, and paint baking processes make the whole product solid and durable, so it can better keep practical for a long time. Excellent Performance: The 1800W pure copper motor with less consumption, hydraulic transmission system, 35273.96lbs output force, high-quality impact head, and about 5000rpm rotational speed enable this product to accurately locat.
Electric Hydraulic Hole Puncher 110V Steel Plate Hole Punching Machine 5 Die Set - Description A powerful tool is indispensable in punching work. Made of aluminum, plastic, and iron, and adopting painting and paint baking processes, our electric hydraulic hole puncher lays the foundation for your long-term use. Excellent performance(1800W) allows you to complete your work faster and more conveniently. A simple operation can also save you time. Key Features Build to Last: High-quality plastic, aluminum, iron, painting, and paint baking processes make the whole product solid and durable, so it can better keep practical for a long time. Excellent Performance: The 1800W pure copper motor with less consumption, hydraulic transmission system, 35273.96lbs output force, high-quality impact head, and about 5000rpm rotational speed enable this product to accurately locat.
1557SS Knockout Hydraulic Punch Sleeve - 1557SS hydraulic punch sleeve for stainless steel. The proprietary cutting edge extends punch life and punches more holes. Country Of Origin :United States.
TH0397 – Manual Knockout Punch Driver Kit for ½ Inch to 1-1/4” Inch Electrical C - Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works for use in tight areas. Manual drive knockout punches, for use with ratchet, wrench, or electric driver.
TH0397 – Manual Knockout Punch Driver Kit for ½ inch to 1-1/4” inch Electrical C - Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works for use in tight areas. Manual drive knockout punches, for use with ratchet, wrench, or electric driver.
Greenlee Quick Draw Hydraulic Punch Driver Set - 7806SB - The punch driver works perfect and comes with extra bits. See pictures for details and condition! I OFFER *FREE* SHIPPING through FedEx and usps only in the lower 48 States! Free shipping is not included with PO Box addresses as well as APO/FPO. For PO Box addresses, there is an extra charge if seller’s selected shipping is through FedEx. There is also an extra charge for addresses outside of the lower 48 States (Alaska, Hawaii, Puerto Rico, other U.S. territories), as well as APO/FPO addresses. As far as shipping out of the country or out of the jurisdiction stated above, the transaction will be cancelled. Please message me if you have any questions with shipping!23-2839-2
Used-Greenlee Hydraulic Pump/ Punch & Die Knock Set 1/2" to 4", 767 -746 Ram - Used-Greenlee Hydraulic Pump/ Punch & Die Knock Set (1/2" to 4" ) 767 / 746 Ram (Note: Punch & Die Size:1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2" , 3" , 4" ) —Note: 5 items Marked On Pictures With Blue Marker Are: Current Tools Usa Brand !!__See Images For More Details__
Greeenlee KO Set (6 total) 1/2"- 2" Knockout Punch Conduit Set ED4U 3007A - Greeenlee KO Set (6 total) 1/2"- 2" Knockout Punch Conduit Set. Good preowned units. See pics for actual item you will receive.Shelf #4-C ElectricDealsForYou Item #3007. I am happy to drive to catch the Regional Truck if necessary; mileage fee will apply.
Portable Hydraulic Angle Iron Angle Steel Hole Punch Down Tools - Throat : 40mm. Hydraulic angle iron hole punch tool. 1 x Angle Iron Steel Hole Punch Down Tools. Punching Range: angle iron thickness below 5mm(3 3mm-5 5mm). Punching Force: 70KN. Net weight 3.44kg.
HILTI NPU 100-A Cordless Knockout Punch IP A22 - With its hydraulic design, you can punch holes quickly and easily without any hassle. Plus, its cordless feature gives you the freedom to use it anywhere, without worrying about wires getting in the way.
GREENLEE DSH-S3/4 Knockout Draw Stud,3/4",Steel - GREENLEE DSH-S3/4. Knockout Draw Stud,3/4",Steel. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Grainger Part #:55FE89. Power adapters and other modifications may be necessary for proper operation in other countries.
TH0305 Square 45Mm X 45Mm 1/16 DIN Panel Meter Punch Dies 1.772" X 1.772" - This set requires the use of a hydraulic punch ram with a capacity of at least 12 US Tons. Square DIN Punch Die Set for 45mm x 45 mm (1/16 DIN). Draw studs and spacers are included for all of the above specifications.
VEVOR Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - Why Choose VEVOR?. This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
Greenlee 34297 Seal Repair Kit - The Greenlee 34297 Seal Repair Kit is the perfect tool for sealing wire bundles, coaxial cables and fiber optic lines. It features a self-sealing design that makes it easy to use. Klein Tools 69035 Fuse 6X32 500Ma 1000V-Mm600/700.
Kit De Perforador Hidraulico Con Orificio Perforador De 1/2 A 2 Pulgadas Con... - Potente capacidad de perforación de 8 TONELADAS VERDADERAS EE. Compatible con GREENLEE y otras herramientas de perforación domésticas con roscas de 3/4"-16. Punzones: Acero, Acero inoxidable, Latón, Cobre, Aluminio (solo aleaciones blandas), Fibra de vidrio, Plástico Operación conveniente: el juego de troqueles es rápido y fácil de operar.
Greenlee 7306 KnockOut Punch & Die 1/2”-2” **GREAT SHAPE** - Here we have a Greenlee 7306 KnockOut Punch & Die for 1/2”-2”.With questions call Alex.You wi receive exactly what pictured: nothing more — nothing less.Please check out our other listings for more Greenlee and Ridgid tools.
Gardner PH-20 Hydraulic Slugger Slug Out Hand Pump 1/2"-4" Knockout Punch Set - Size: Length: 22 in. Width: 15 in. Height: 8 in. Prefer to pick it up yourself?. To get a freight quote we will need to know the following Weight (lbs, oz): 50. Need it urgently?. Call us and we will do what we can to get it to you quickly.
GREENLEE KCC-7674 Knock Out Case - GREENLEE KCC-7674. Knock Out Case. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
Yescom 10 Ton Hydraulic Knockout Punch Hole Driver Kit Complete Tool Set with 6 - Yescom 10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies. [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
🇺🇸Greenlee 767A Hand Pump & Ram Hydraulic Knockout Driver🇺🇸 - 🇺🇸Greenlee 767A Hand Pump & Ram Hydraulic Knockout Driver🇺🇸This pump does work, but I’m sure it could use some hydraulic oil. Pump and ram. The plate on the bottom of the pump has a piece broken off, probably not a big deal. I have it circled in the photos section. Ready to ship. Fast, free shipping. 100% feedback for 19 years.
Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
7646 Ram and Hand Pump Hydraulic Driver Kit - Item model number 7646. Part Number 7646. Included Components, 7646, 11 ton, 746, 746A, ram, ram and pump, hand pump, ram and hand pump, manual-hydraulic, manual-hydraulic knockout, knockout kit, knockout, knock out, knock-out, tool, draw stud, pipe, conduit, mild steel, stainless steel.
Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool Kit 1/2 to 2 - Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency.
TEMCo Hydraulic Knockout Punch TH0004 - Electrical Conduit Hole Cutter Set KO... - Its compact design is especially designed for field use on construction sites and maintenance jobs. Quick, effortless and simple to operate. The TH0004 punch has a 5 Year Warranty. 6 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2".
Pittsburgh Automotive Hydraulic Punch Driver Kit 96718 - Here we have a Pittsburg hydraulic punch driver kit. We have not tested this unit. Appears to be missing the smallest punch and instruction manual. Please refer to the photos for more details. If you have any questions, please let us know.
1/2" to 2" Hand Tool Cutter Driver Kit Conduit Knockout Set - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
Hydraulic Knockout Punch Driver 10 Ton 1/2" to 2" With 6 Dies Tool Kit - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) .
10 Ton 1/2" to 2" Hydraulic Knockout Punch Driver Tool With 6 Dies Kit - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) .
Hydraulic Knockout Punch Driver 10 Ton 1/2" to 2" With 6 Dies Tool Kit - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) .
10 Ton 1/2" to 2" Hydraulic Knockout Punch Driver Tool With 6 Dies Kit - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) .
Hydraulic Knockout Punch Driver 10 Ton 1/2" to 2" With 6 Dies Tool Kit - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) .
10 Ton 1/2" to 2" Hydraulic Knockout Punch Driver Tool With 6 Dies Kit - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) .
Hydraulic Knockout Punch Driver 10 Ton 1/2" to 2" With 6 Dies Tool Kit - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) .
10 Ton 1/2" to 2" Hydraulic Knockout Punch Driver Tool With 6 Dies Kit - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) .
Hydraulic Knockout Punch Driver 10 Ton 1/2" to 2" With 6 Dies Tool Kit - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) .
10 Ton 1/2" to 2" Hydraulic Knockout Punch Driver Tool With 6 Dies Kit - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) .
Hydraulic Knockout Punch Driver 10 Ton 1/2" to 2" With 6 Dies Tool Kit - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) .
10 Ton 1/2" to 2" Hydraulic Knockout Punch Driver Tool With 6 Dies Kit - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) .
Hydraulic Knockout Punch Driver 10 Ton 1/2" to 2" With 6 Dies Tool Kit - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) .
15ton Hydraulic Punch Kit w/ 10 Dies Red - Complete Punch Tools - Hydraulic punch tool kit features 1pc 15-ton pump; 2pcs draw studs; 2pcs piston shaft; 2pcs spacers and 10 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2"; 2"; 2 1/2"; 3"; 3 1/2" and 4" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
10ton Hydraulic Metal Punch Kit Red - Complete Punch Tools - Hydraulic punch tool kit features 1pc 10-ton pump; 2pcs draw studs; 1pc piston shaft; 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2" and 2" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
10ton Hydraulic Metal Punch Kit Yellow - Complete Punch Tools - Hydraulic punch tool kit features 1pc 10-ton pump; 2pcs draw studs; 1pc piston shaft; 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2" and 2" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
9ton Hydraulic Metal Punch Kit Blue - Complete Punch Tools - Hydraulic punch tool kit features 1pc 9-ton pump; 2pcs draw studs; 1pc piston shaft; 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2" and 2" conduit sizes; can drill different sizes holes on stainless steel; aluminum; steel; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
Portable rechargeable EZ-60K electric straight handle hydraulic hole opener - Product: Hydraulic Hole Opener. Stroke: 20mm. Straight handle compact structure, lightweight design, easy to carry. Opening range: 16- 60mm. The maximum thickness of the opening: stainless steel ≤ 1.6mm / iron plate ≤ 3.2mm.
Hydraulic Hole Punching Machine 6 Ton Manual Hole Digger Punch US - Description This hydraulic hole punching machine is made of high-quality steel and plastic, which is strong, durable, and not easy to deform. It has a tonnage of 6T/13227.7lbs, which is large enough to meet your daily needs. It is suitable for processing stainless steel tubes within 1 mm/0.03inch and iron plates within 1.5 mm/0.05inch.
15-Ton Hydraulic Punch Driver Tool Kit w/ 10 Dies -Used in perfect working order - Complete 15-Ton Hydraulic Punch Driver Tool Kit featuring 1pc 15-ton pump, 2pcs draw studs, 2pcs piston shaft, 2pcs spacers and 10 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 3 1/2" and 4" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic and more; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
9ton Hydraulic Metal Punch Kit Blue - Complete Punch Tools - Hydraulic punch tool kit features 1pc 9-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, aluminum, steel, plastic, etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel, perfect to be used for different drilling projects.
10ton Hydraulic Metal Punch Kit Yellow - Complete Punch Tools - Hydraulic punch tool kit features 1pc 10-ton pump; 2pcs draw studs; 1pc piston shaft; 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2" and 2" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
15ton Hydraulic Punch Kit w/ 10 Dies Yellow - Complete Punch Tools - Hydraulic punch tool kit features 1pc 15-ton pump; 2pcs draw studs; 2pcs piston shaft; 2pcs spacers and 10 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2"; 2"; 2 1/2"; 3"; 3 1/2" and 4" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
Yescom 10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool W/ 6 - [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
Yescom 10 Ton Hydraulic Knockout Punch Hole Driver Kit Complete Tool Set with 6 - Yescom 10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies. [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
1/2" to 2" Hand Tool Cutter Driver Kit Conduit Knockout Set - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
Greenlee 1731 C-Frame Hydraulic Knockout Punch Driver #4 - Here we have a Greenlee 1731 C-Frame Hydraulic Knockout Punch Driver.With questions call Alex.You will receive exactly what’s pictured: nothing more — nothing less.Please check out our other listings for more Greenlee and Ridgid tools.
Greenlee 1731 C-Frame Hydraulic Knockout Punch Driver #3 - Here we have a Greenlee 1731 C-Frame Hydraulic Knockout Punch Driver.With questions call Alex.You will receive exactly what’s pictured: nothing more — nothing less.Please check out our other listings for more Greenlee and Ridgid tools.
Greenlee 1731 C-Frame Hydraulic Knockout Punch Driver #2 - Here we have a Greenlee 1731 C-Frame Hydraulic Knockout Punch Driver.With questions call Alex.You will receive exactly what’s pictured: nothing more — nothing less.Please check out our other listings for more Greenlee and Ridgid tools.
TEMCo TH0004 1/2”-2” Hydraulic Knockout Punch Set greenlee - Here we have a TEMCo TH0004 hydraulic knockout set for 1/2”-2 With questions call Alex.You will receive exactly what’s pictured: nothing more — nothing lessPlease check out our other listings for more Greenlee and Ridgid tools.
Greenlee 7304 KnockOut Punch & Die 2-1/2”-4” 7306 7310 **GREAT SHAPE** #4 - Here we have a Greenlee 7304 KnockOut Punch & Die for 2-1/2”-4”.With questions call Alex.You wi receive exactly what pictured: nothing more — nothing less.Please check out our other listings for more Greenlee and Ridgid tools.
Greenlee 7304 KnockOut Punch & Die 2-1/2”-4” 7306 7310 **GREAT SHAPE** #3 - Here we have a Greenlee 7304 KnockOut Punch & Die for 2-1/2”-4”.With questions call Alex.You wi receive exactly what pictured: nothing more — nothing less.Please check out our other listings for more Greenlee and Ridgid tools.
Greenlee 7804SB/7806SB Quick Draw Hydraulic Punch Driver Kit #2 - Here we have a Greenlee 7804SB/7806SB Quick Draw Hydraulic Punch Driver Kit.With questions call Alex.You will receive exactly what’s pictured: nothing more — nothing less.Please check out our other listings for more Greenlee and Ridgid tools.
10ton Hydraulic Metal Punch Kit Red - Complete Punch Tools - Hydraulic punch tool kit features 1pc 10-ton pump; 2pcs draw studs; 1pc piston shaft; 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2" and 2" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
15ton Hydraulic Punch Kit w/ 10 Dies Red - Complete Punch Tools - Hydraulic punch tool kit features 1pc 15-ton pump; 2pcs draw studs; 2pcs piston shaft; 2pcs spacers and 10 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2"; 2"; 2 1/2"; 3"; 3 1/2" and 4" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
10ton Hydraulic Metal Punch Kit Red - Complete Punch Tools - Hydraulic punch tool kit features 1pc 10-ton pump; 2pcs draw studs; 1pc piston shaft; 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2" and 2" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
9ton Hydraulic Metal Punch Kit Blue - Complete Punch Tools - Hydraulic punch tool kit features 1pc 9-ton pump; 2pcs draw studs; 1pc piston shaft; 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2" and 2" conduit sizes; can drill different sizes holes on stainless steel; aluminum; steel; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
10 Ton Hydraulic Knockout Punch Driver Tool Kit 6 Dies - Empty punching is strictly prohibited! Two driving bolts are rugged and built to last. Easy seating with the brackets on the bottom of the hydraulic pump. Rotatable ON / OFF Switch for more safety.
15 Ton 1/2 Inch to 4 Inch Hydraulic Knockout Punch Driver Tool Kit with 10 Di... - Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency.
GREENLEE K2P-3/4 Knockout Punch,1 1/8" Size - GREENLEE K2P-3/4. Knockout Punch,1 1/8" Size. Grainger reserves the right to accept or reject any order. Order Acceptance. Diversion contrary to U.S. law is prohibited. Power adapters and other modifications may be necessary for proper operation in other countries.
Greenlee KCC-7674 Replacement case for 1/2" - 4" Ram and Hand Pump - • Strong and durable blow molded case with steel hinge pins, steel latches and integrated handle built to hold up on the jobsite. • Size labels - easily identify and locate knockout parts. • Knockout parts and driver not included.
TH0305 Square 45Mm X 45Mm 1/16 DIN Panel Meter Punch Dies 1.772" X 1.772" - This set requires the use of a hydraulic punch ram with a capacity of at least 12 US Tons. Square DIN Punch Die Set for 45mm x 45 mm (1/16 DIN). Draw studs and spacers are included for all of the above specifications.
15ton Hydraulic Punch Kit w/ 10 Dies Yellow - Complete Punch Tools - Hydraulic punch tool kit features 1pc 15-ton pump; 2pcs draw studs; 2pcs piston shaft; 2pcs spacers and 10 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2"; 2"; 2 1/2"; 3"; 3 1/2" and 4" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
Yescom 10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool W/ 6 - [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
Yescom 10 Ton Hydraulic Knockout Punch Hole Driver Kit Complete Tool Set with 6 - Yescom 10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies. [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
Manual Knockout Punch Driver Kit for 1/2 Inch to 1-1/4 Inch Electrical Conduit H - Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works for use in tight areas. Manual drive knockout punches, for use with ratchet, wrench, or electric driver.
Greenlee 767A 1"-4" Hydraulic Conduit Box Slug Buster Kit - Larger punch die sets are in a different case. Older kit, but in good/fair condition, just dirty. Prefer to pick it up yourself?. Need it urgently?. Call us and we will do what we can to get it to you quickly.
15ton Hydraulic Punch Kit w 10 Dies Red - Complete Punch Tools - Hydraulic punch tool kit features 1pc 15-ton pump; 2pcs draw studs; 2pcs piston shaft; 2pcs spacers and 10 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2"; 2"; 2 1/2"; 3"; 3 1/2" and 4" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
Manual Knockout Punch Driver Kit for 1/2 inch to 1-1/4 inch Electrical Conduit H - Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works for use in tight areas. Manual drive knockout punches, for use with ratchet, wrench, or electric driver.
GREENLEE K2P-1-B Knockout Punch,1 23/64" Size - GREENLEE K2P-1-B. Knockout Punch,1 23/64" Size. Grainger reserves the right to accept or reject any order. Order Acceptance. Power adapters and other modifications may be necessary for proper operation in other countries.
Hydraulic Knockout Punch 6 Die 10 Ton,Holesaw Set Cutter Tool,Saw Electrical - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
GREENLEE Gator® Knockout Punch Kit (LS50L) - it only goes with a battery with number three a charger what you see in the photos I only have those objects with those rants I don't have any more look at the photos and that is what you will receive it is used but it is working well thanks for looking at the photoswe use recycled boxesthis item requires a signature upon deliveryIf you have any questions, you can send me a message and I'll answer as soon as possible.
Newtry CC-100 Manuel Punch Driver - Newtry CC-100 Manuel Punch Driver with 22.2 mm Punch and Die and 34.1 mm Punch and Die. In GREAT condition
6 Ton Manual Knockout Hole Punch Driver Kit 1/2 to 2 Inch 6 Dies Hole Cutter Set - [Smooth Punching]: Slug splitting design punch with 6 tons punching force for smooth punching & easy slug removal, leaving round holes & uniform hole size with clean hole edges. [Complete Hole Cutter Set]: 6 Ton Manual Knockout Hole Punch Driver Kit includes 1 wrench, 1 sleeve, 2 draw studs, 6 punches & 1 carrying case; With 6 punch sizes including 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", it can punch holes in mild steel up to 10 gauge, aluminum, fiberglass & plastics.
10 Ton Hydraulic Knockout Punch Hole Driver Kit Complete Tool Set With 6 Dies - Yescom 10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies. [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
Greenlee 7506 Slug Splitter Hydraulic Knockout Punch Driver Set - Heavy Duty Slug Splitter. Slug Splitter. Cat No: 7506. Hydraulic Knockout Punch Set. Hydraulic Knockout Set With 767 Hand Pump. Cat No: 767. We are here to help and will do our best to resolve any issues.
15ton Hydraulic Punch Kit w 10 Dies Yellow - Complete Punch Tools - Hydraulic punch tool kit features 1pc 15-ton pump; 2pcs draw studs; 2pcs piston shaft; 2pcs spacers and 10 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2"; 2"; 2 1/2"; 3"; 3 1/2" and 4" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
10ton Hydraulic Metal Punch Kit Yellow - Complete Punch Tools - Hydraulic punch tool kit features 1pc 10-ton pump; 2pcs draw studs; 1pc piston shaft; 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2" and 2" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
9ton Hydraulic Metal Punch Kit Blue - Complete Punch Tools - Hydraulic punch tool kit features 1pc 9-ton pump; 2pcs draw studs; 1pc piston shaft; 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2" and 2" conduit sizes; can drill different sizes holes on stainless steel; aluminum; steel; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
9ton Hydraulic Metal Punch Kit Blue - Complete Punch Tools - Hydraulic punch tool kit features 1pc 9-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, aluminum, steel, plastic, etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel, perfect to be used for different drilling projects.
Yescom 10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool W/ 6 - [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
Yescom 10 Ton Hydraulic Knockout Punch Hole Driver Kit Complete Tool Set with 6 - Yescom 10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies. [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
Electric Hydraulic Hole Puncher Hole Cutter Steel Plate Hole Punching Machine - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
Rectangle 22.5mm x 45mm 1/32 DIN Panel Meter Punch Dies 0.886" x 1.772" TH0004 - TH0004 NOT INCLUDED, JUST SPECIFIYING THIS WORKS WITH THAT TOOL . Punch Dies Included (DIN Size): 22.5mm x 45 mm (1/32 DIN). Type: Rectangle DIN Punch Die Set. Draw studs and spacers are included for all of the above specifications.
Temco TH0390 – Manual Knockout Punch Driver Kit (Set) for ½ Inch to 2 Inch Elect - Item model number TH0390. Part Number TH0390. 3/4", 1", 1-1/4", 1-1/2", 2" die sets compatible with THA001 draw stud allowing for use in TEMCo hydraulic drivers TH0004 and TH0037. We believe that any DIYer or professional who works with their hands is doing honorable work and so we do our best to respect the trade or craft.
Manual Knockout Punch Driver Kit for 1/2 Inch to 1-1/4 Inch Electrical Conduit H - Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works for use in tight areas. Style (Conduit Hole Size) 1/2"~1-1/4" Knockout Punch kit.
VEVOR Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - Why Choose VEVOR?. This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
Manual Knockout Punch Driver Kit for 1/2 Inch to 1-1/4 Inch Electrical Conduit H - Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works for use in tight areas. Manual drive knockout punches, for use with ratchet, wrench, or electric driver.
AMZCNC Hydraulic Knockout Hole Punch Driver Kit 1/2 to 4 inch Electrical Cond... - Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency.
AMZCNC Manual Knockout Punch Driver Kit for 1/2 inch to 1-1/4 inch Electrical... - Slug splitting design on punches allows for easier slug removal the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works for use in tight areas. Manual drive knockout punches, for use with ratchet, wrench, or electric driver.
Greenlee Hydraulic Knockout Set 1/2-4 Inch - This Greenlee hydraulic knockout set is an essential tool for any business or industrial setting. It includes punches and dies in sizes ranging from 1/2 inch to 4 inches, making it versatile for a variety of applications. The set is made by a trusted brand, Greenlee, ensuring top quality and durability. The set is suitable for use with various hand tools and knockout punch sets, which makes it an excellent addition to your existing tools. Whether you're a professional contractor or a DIY enthusiast, this Greenlee hydraulic knockout set is a must-have for your toolkit.
10 Ton & 6 Dies Hole 1/2" to 2" Hydraulic Knockout Punch Driver Tool Kit New - Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22mm), 1.115" (27.5mm), 1.362" (34mm), 1.701"(43mm), 1.951"(49mm), 2.416"(60mm) Features: 6 Dies & Punches Interchangeable to Meet Different Needs Rotatable ON / OFF Switch for More Safety Easy Seating with the Brackets on the Bottom of the Hydraulic Pump Plastic Grip at the End of the Long Steel Handle.
9ton Hydraulic Metal Punch Kit Blue - Complete Punch Tools - Hydraulic punch tool kit features 1pc 9-ton pump; 2pcs draw studs; 1pc piston shaft; 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2" and 2" conduit sizes; can drill different sizes holes on stainless steel; aluminum; steel; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
10ton Hydraulic Metal Punch Kit Red - Complete Punch Tools - Hydraulic punch tool kit features 1pc 10-ton pump; 2pcs draw studs; 1pc piston shaft; 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2" and 2" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
Hydraulic Knockout Punch 6 Die 10 Ton Holesaw Set Cutter Tool - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
Greenlee 7506 K/O up to 10 gauge stainless steel Reconditioned - This is a reconditioned product and is in full operational condition. These units have been repainted and the manufacturer's logo may or may not be visible. Slug-Splitter® SC knockout punches with capacities up through 10 gauge stainless steel.
Portable Hydraulic Angle Iron Steel Hole Punch Down Tools +7 Dies - Throat : 40mm. Hydraulic angle iron hole punch tool. Dies : Φ6.5,Φ8.5,Φ10.5,Φ12.5,Φ14.5,Φ16.5,Φ18.5mm. 1 x Angle Iron Steel Hole Punch Down Tools. Punching Range: angle iron thickness below 5mm(3 3mm-5 5mm).
7646 Ram and Hand Pump Hydraulic Driver Kit - Driver with hand pump, draw studs, spacer and plastic case. Fast, easy and simple to operate. Compact design for field use on construction sites and maintenance jobs. Will also drive 751 cable Cutter head.
Greenlee NSB 2113B Power Tools EA - MPN (Manufacturer Part Number): 2113B. Product Condition: NSB. OEM ,NSB, NNB, NWD, andREF. We strive for excellence and will do anything in our power to keep you satisfied. We will respond to you within 24 hours and do our best to help you out!
GREENLEE 746A Knock Out Hydraulic Ram - GREENLEE 746A. Knock Out Hydraulic Ram. Diversion contrary to U.S. law is prohibited. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
7646 Ram and Hand Pump Hydraulic Driver Kit - Item model number 7646. Part Number 7646. Included Components, 7646, 11 ton, 746, 746A, ram, ram and pump, hand pump, ram and hand pump, manual-hydraulic, manual-hydraulic knockout, knockout kit, knockout, knock out, knock-out, tool, draw stud, pipe, conduit, mild steel, stainless steel.
GREENLEE 746 Hydraulic Knockout Punch Ram,1 - GREENLEE 746. Hydraulic Knockout Punch Ram,1. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
TEMCo 2" HYDRAULIC KNOCKOUT PUNCH Electrical Conduit Hole Cutter Set KO Tool Kit - Warranty: (TEMCO WARRANTY IS NO LONGER APPLICABLE WITH THIS PRODUCT). Type: Hydraulic Knockout Punch. Punch Dies Included (Conduit Fitting Size): ½", ¾", 1", 1 ¼", 1 ½", 2". Construction Material: Steel pump and cylinder, hardened tool steel die sets.
Greenlee K2p-1/2 Knock Out Set - Knock Out Set. Tsubaki 60B10f-1 Single Strand Sprocket, 60 Chain Size, 1 Bore Dia., 10 # Of. Westward 12F848 Hand File,Dbl Cut,14 In.,Black Oxide. Lyle T1-6207-Eg_12X18 Parking Sign,18"H,12"W,Aluminum, T1-6207-Eg_12X18.
Eclipse 902-481-Sbs Shaft And Bearing,3-15/32 In. L,Steel - Lift-All Ee2801tfx3 Web Sling, Flat Eye And Eye, 3 Ft L, 1 In W, Tuff-Edge. Pic Gauges 201L-208A Vacuum Gauge,1/8 In. and Enclosures. & Recepticles. Electrical Outlets. Light Industrial. Electrical Boxes.
Temco TH0390 – Manual Knockout Punch Driver Kit (Set) for ½ Inch to 2 Inch Elect - Item model number TH0390. Part Number TH0390. 3/4", 1", 1-1/4", 1-1/2", 2" die sets compatible with THA001 draw stud allowing for use in TEMCo hydraulic drivers TH0004 and TH0037. We believe that any DIYer or professional who works with their hands is doing honorable work and so we do our best to respect the trade or craft.
SYK-8B Manual Hydraulic punching Machine 22-60mm Perforating Hole Puncher Digger - Manual portable hydraulic punching machine mini stainless steel hole puncher with six sets of molds (22-60mm) black plastic box. 1 Hydraulic Punching Machine. Sturdy steel structure: steel mold and steel pump body ensure high strength, strong and durable, stable structure suitable for frequent stamping work.
Temco TH0390 – Manual Knockout Punch Driver Kit (Set) for ½ Inch to 2 Inch Elect - Item model number TH0390. Part Number TH0390. 3/4", 1", 1-1/4", 1-1/2", 2" die sets compatible with THA001 draw stud allowing for use in TEMCo hydraulic drivers TH0004 and TH0037. We believe that any DIYer or professional who works with their hands is doing honorable work and so we do our best to respect the trade or craft.
TH0305 Square 45Mm X 45Mm 1/16 DIN Panel Meter Punch Dies 1.772" X 1.772" - This set requires the use of a hydraulic punch ram with a capacity of at least 12 US Tons. Square DIN Punch Die Set for 45mm x 45 mm (1/16 DIN). Draw studs and spacers are included for all of the above specifications.
AMZCNC Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool Ki... - Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency.
Greenlee 7906SB Quick 90 Hydraulic Punch Kit Knockout 1/2"-2-1/2" Elect. Tools - Greenlee 7906SB Quick 90 Hydraulic Punch Kit Knockout 1/2" - 2-1/2". The 2-1/2" knockout has previous owner mark on it. You Know what they say "A Pictured worth a 1000 Words". Not Original case. In addition, I can not predict how you may like your guitars set up.
DAVCO #404-C-2-A 40TON HYDRAULIC IRONWORKER - Punch 1" Hole in 1/2" - DAVCO #404-C-2-A 40TON HYD. -- PUNCH 1" DIA X 1/2" THICK. We have a loading dock and fork lifts with the ability to load any type of truck. -- ANGLE SHEAR: 3 1/2 X 3 1/2 X 1/4". we can either use your account number or provide a rate quote.
Metal Hole Punch, Portable 6 Ton Hydraulic Hole Punching Machine Kit with 4 Dies - Description This hydraulic hole punching machine is made of high-quality steel and plastic, which is strong, durable, and not easy to deform. It has a tonnage of 6T/13227.7lbs, which is large enough to meet your daily needs. It is suitable for processing stainless steel tubes within 1 mm/0.03inch and iron plates within 1.5 mm/0.05inch.
GREENLEE 7806SB Hydraulic Punch Driver Set,10 ga. Steel - GREENLEE 7806SB. Hydraulic Punch Driver Set, Number of Pieces 15, Capacity 10 ga Steel, Conduit and Pipe Size 1/2 in to 2 in, Workpiece Material Mild Steel, For Use With Quick Draw Flex Driver, Includes Quick Draw Hydraulic Driver, 1/2, 3/4, 1, 1-1/4, 1-1/2, 2 in Slug Buster Punches and Dies, (2) Draw Studs, (1) Adapter, (1) Spacer and Plastic Carrying Case.
GREENLEE H4802-3 Pole Tamper,72 In - GREENLEE H4802-3. Pole Tamper, Hydraulic, Hydraulic System Type Open or Closed Center, Blows per Minute 1160@5GPM, Pressure Port 9/16 In. - 16 SAE O-Ring, Min. 140 F, Sound Level dB 103, Foot Size 2-1/2 In.
15ton Hydraulic Punch Kit w 10 Dies Red - Complete Punch Tools - Hydraulic punch tool kit features 1pc 15-ton pump; 2pcs draw studs; 2pcs piston shaft; 2pcs spacers and 10 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2"; 2"; 2 1/2"; 3"; 3 1/2" and 4" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
10ton Hydraulic Metal Punch Kit Red - Complete Punch Tools - Hydraulic punch tool kit features 1pc 10-ton pump; 2pcs draw studs; 1pc piston shaft; 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2" and 2" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
GREENLEE DSBB-3/4 Knock Out Draw Stud - GREENLEE DSBB-3/4. Knock Out Draw Stud. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Grainger Part #:793R56. Power adapters and other modifications may be necessary for proper operation in other countries.
Portable Metal Hole Digger Hydraulic Punch Kit Hydraulic Hole Punching Device US - Description This hydraulic hole punching machine is made of high-quality steel and plastic, which is strong, durable, and not easy to deform. It has a tonnage of 6T/13227.7lbs, which is large enough to meet your daily needs. It is suitable for processing stainless steel tubes within 1 mm/0.03inch and iron plates within 1.5 mm/0.05inch.
2 complete sets Greenlee ½"-2" slugbuster / knockout die sets - (1) Good used Greenlee slugbuster type set 1/2" -2". My pump and ram are rebuilt. (5) Good greenlee spacers the 3 different sizes. (2) Greenlee 3/8" draw stud. (2) Sets of knockout die sets1/2" -2".
TH0305 Square 45Mm X 45Mm 1/16 DIN Panel Meter Punch Dies 1.772" X 1.772" - This set requires the use of a hydraulic punch ram with a capacity of at least 12 US Tons. Square DIN Punch Die Set for 45mm x 45 mm (1/16 DIN). Draw studs and spacers are included for all of the above specifications.
Temco TH0390 – Manual Knockout Punch Driver Kit (Set) for ½ Inch to 2 Inch Elect - Item model number TH0390. Part Number TH0390. 3/4", 1", 1-1/4", 1-1/2", 2" die sets compatible with THA001 draw stud allowing for use in TEMCo hydraulic drivers TH0004 and TH0037. We believe that any DIYer or professional who works with their hands is doing honorable work and so we do our best to respect the trade or craft.
Manual Knockout Hole Punch Driver Kit 1/2 to 2 inch Electrical Conduit Hole C... - Manual Knockout Hole Punch Driver Kit. 【Durable Dies & Punches Set】 ½", ¾", 1", 1¼", 1½", 2". fits ½", ¾", 1", 1¼", 1½", 2" Conduit Size. Operation: Battery,hydraulic,ratchet or manual drivers, when used with ratchet, hydraulic or battery drivers,buy the punch and die only,the draw stud is part of the driver kit.
AMZCNC 15 Ton 1/2 Inch to 4 Inch Hydraulic Knockout Punch Driver Tool Kit wit... - Manufacturer : AMZCNC. 10 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2",2-1/2",3"3-1/2",4". Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass, Plastic Convenient Operation: The knockout set is fast and easy to operate.
AMZCNC Hydraulic Knockout Hole Punch Driver Kit 1/2 to 4 inch Electrical Cond... - Manufacturer : AMZCNC. Punches: Steel, Stainless Steel, Brass, Copper, Aluminum (soft alloys only), Fiberglass, Plastic Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole.
9ton Hydraulic Metal Punch Kit Blue - Complete Punch Tools - Hydraulic punch tool kit features 1pc 9-ton pump; 2pcs draw studs; 1pc piston shaft; 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2" and 2" conduit sizes; can drill different sizes holes on stainless steel; aluminum; steel; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
10ton Hydraulic Metal Punch Kit Yellow - Complete Punch Tools - Hydraulic punch tool kit features 1pc 10-ton pump; 2pcs draw studs; 1pc piston shaft; 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2" and 2" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
10ton Hydraulic Metal Punch Kit Red - Complete Punch Tools - Hydraulic punch tool kit features 1pc 10-ton pump; 2pcs draw studs; 1pc piston shaft; 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2" and 2" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
15ton Hydraulic Punch Kit w 10 Dies Red - Complete Punch Tools - Hydraulic punch tool kit features 1pc 15-ton pump; 2pcs draw studs; 2pcs piston shaft; 2pcs spacers and 10 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2"; 2"; 2 1/2"; 3"; 3 1/2" and 4" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
9ton Hydraulic Metal Punch Kit Blue - Complete Punch Tools - Hydraulic punch tool kit features 1pc 9-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, aluminum, steel, plastic, etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel, perfect to be used for different drilling projects.
15ton Hydraulic Punch Kit w 10 Dies Red - Complete Punch Tools - Hydraulic punch tool kit features 1pc 15-ton pump; 2pcs draw studs; 2pcs piston shaft; 2pcs spacers and 10 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2"; 2"; 2 1/2"; 3"; 3 1/2" and 4" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
Hydraulic Knockout Punch 6 Die 10 Ton, Holesaw Set Cutter Tool - This hydraulic knockout hole punch driver kit features a compact and durable structure with high hardness and great quality, easy to operate to get a perfect, uniform hole. It is suitable for construction site and maintenance work.
900W Electric Hydraulic Hole Punch MHP-20 With Die Set Electro Steel Local - 【 ULTRA-HIGH POWER 】 - Equipped w ith a 900W high power motor, the electric hydraulic hole puncher features high efficiency and quickly enters the hole. It is suitable for an iron/steel plate no higher than 6 mm and a copper/aluminum plate no higher than 8 mm.
15ton Hydraulic Punch Kit w 10 Dies Red - Complete Punch Tools - Hydraulic punch tool kit features 1pc 15-ton pump; 2pcs draw studs; 2pcs piston shaft; 2pcs spacers and 10 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2"; 2"; 2 1/2"; 3"; 3 1/2" and 4" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
10ton Hydraulic Metal Punch Kit Yellow - Complete Punch Tools - Hydraulic punch tool kit features 1pc 10-ton pump; 2pcs draw studs; 1pc piston shaft; 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2" and 2" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
9ton Hydraulic Metal Punch Kit Blue - Complete Punch Tools - Hydraulic punch tool kit features 1pc 9-ton pump; 2pcs draw studs; 1pc piston shaft; 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2" and 2" conduit sizes; can drill different sizes holes on stainless steel; aluminum; steel; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
15ton Hydraulic Punch Kit w 10 Dies Yellow - Complete Punch Tools - Hydraulic punch tool kit features 1pc 15-ton pump; 2pcs draw studs; 2pcs piston shaft; 2pcs spacers and 10 sets of interchangeable dies & punches fitting for 1/2"; 3/4"; 1"; 1 1/4"; 1 1/2"; 2"; 2 1/2"; 3"; 3 1/2" and 4" conduit sizes; can drill different sizes holes on stainless steel; iron; steel; aluminum; plastic; etc; 1/8' (11 gauge) max punching thickness for iron and 1/16' (16 gauge) for stainless steel; perfect to be used for different drilling projects.
Manual Knockout Hole Punch Driver Kit 1/2 to 2 Inch Electrical Conduit Hole Cutt - Style (Conduit Hole Size) 1/2"~2" Knockout Punch kit. Manual Knockout Hole Punch Driver Kit. 【Durable Dies & Punches Set】 ½", ¾", 1", 1¼", 1½", 2". fits ½", ¾", 1", 1¼", 1½", 2" Conduit Size. Operation: Battery,hydraulic,ratchet or manual drivers, when used with ratchet, hydraulic or battery drivers,buy the punch and die only,the draw stud is part of the driver kit.
Greenlee K2p-1-B Knockout Punch,1 23/64" Size - This Greenlee K2P-1-B Knockout Punch is the ideal tool for punching holes in thin steel, including conduit and pipe. It has a 1 23/64" hole size and a 1" conduit and pipe size. This splitting knockout punch is designed for 10/12 gauge mild steel.
TH0305 Square 45Mm X 45Mm 1/16 DIN Panel Meter Punch Dies 1.772" X 1.772" - This set requires the use of a hydraulic punch ram with a capacity of at least 12 US Tons. Square DIN Punch Die Set for 45mm x 45 mm (1/16 DIN). Draw studs and spacers are included for all of the above specifications.
Black Hydraulic Hole Opener Fittings with Gasket Knockout Puncher Parts - Specification: Material: Iron Color: Black Size: Small tie rod: Thread diameter of 20mm/10mm, length of 98mm Lock cap: 24mm Gasket: 41.5mm Weight: 189g Feature: 1.Note: The diameter of the mold is less than 27.5mm, use a small pull bar. 2.Use: hydraulic hole opener accessories. 3.Every product has a unique manufacturing part number label on the inner package that proves it has been qualified,which include Part Number,model number and inspection date information. Package Include: 1 x Hydraulic Drivers Draw Stud 1 x Lock Cap 1 x Gasket".
TH0305 Square 45Mm X 45Mm 1/16 DIN Panel Meter Punch Dies 1.772" X 1.772" - This set requires the use of a hydraulic punch ram with a capacity of at least 12 US Tons. Square DIN Punch Die Set for 45mm x 45 mm (1/16 DIN). Draw studs and spacers are included for all of the above specifications.
Temco TH0390 – Manual Knockout Punch Driver Kit (Set) for ½ Inch to 2 Inch Elect - 3/4", 1", 1-1/4", 1-1/2", 2" die sets compatible with THA001 draw stud allowing for use in TEMCo hydraulic drivers TH0004 and TH0037. We believe that any DIYer or professional who works with their hands is doing honorable work and so we do our best to respect the trade or craft.
Yescom 10 Ton Hydraulic Knockout Punch Hole Driver Kit Complete Tool Set with 6 - Yescom 10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies. [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
Yescom 10 Ton Hydraulic Knockout Punch Hole Driver Kit Complete Tool Set with 6 - Yescom 10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies. [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
Greenlee LS100X11SBSP4 Intelli-PUNCH 11-Ton Battery-Hydraulic Knockout Package - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee KCC4-LS Slug-Buster 1/2" - 4" for Battery-Hydraulic Drivers - • Use this knockout upgrade set to upgrade your knockouts and case to fit your existing Greenlee LS50L2 or LS100X. • Slug-Buster® punch profile splits slugs for easy slug removal. • Knurled edge on punch for better grip.
Greenlee KCC4-767 Slug-Buster 1/2" - 4" for Ram and Hand Pump - • Use this knockout upgrade set to upgrade your knockouts and case to fit your existing Greenlee Ram and Hand Pump. • Slug-Buster® punch profile splits slugs for easy slug removal. • (1) 7/16" Draw Stud.
10 Ton Hydraulic Knockout Punch Hole Driver Kit Complete Tool Set with 6 Dies - Yescom 10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies. [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
GREENLEE 3" DIAMETER Punch, die,& draw stud Cat# 5004258 ED4U #3123-A - (Good preowned condition. Cutting edges are still sharp. Minor wear from normal use. I am happy to drive to catch the Regional Truck if necessary; mileage fee will apply. :) ELECTRICDEALSFORYOU # 3123-A SHELF: 4-C.
110V Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine 1800W New - A powerful tool is indispensable in punching work. Excellent performance(1800W) allows you to complete your work faster and more conveniently. Power: 1800W. 1 Electric Hydraulic Hole Puncher. Solid Base: The large square base increases the stress area, making the product more stable.
Greenlee Kcc4-767 Knock Out Set - Knock Out Set. Husky 009952 Low Level Drum Alarm. Zoro Select L01200.160.0170 Class 8.8, M16-2.00 Hex Head Cap Screw, Zinc Plated. Light Industrial. Zoro Select Uv14 Masking Tape,Paper,Blue,2". & Recepticles.
Temco TH0390 – Manual Knockout Punch Driver Kit (Set) for ½ Inch to 2 Inch Elect - 3/4", 1", 1-1/4", 1-1/2", 2" die sets compatible with THA001 draw stud allowing for use in TEMCo hydraulic drivers TH0004 and TH0037. We believe that any DIYer or professional who works with their hands is doing honorable work and so we do our best to respect the trade or craft.
Greenlee 746A Knock Out Hydraulic Ram - Knock Out Hydraulic Ram. Yellow Jacket 69341 Electronic Leak Detector,Nitrogen. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose.
110V Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine 1300W10T - 110V Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine 1300W10T with Quick-Plug Foot Switch for Steel/Angle Steel/Iron/Copper/Aluminum Plate with 5 Punch Dies. ✅portable electric punching machine:2-3 seconds fast punching with high efficiency;.
Hydraulic Knockout Punch Driver 10 Ton 1/2" to 2" With 6 Dies Tool Kit - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) Features: 6 Dies & Punches Interchangeable to Meet Different Needs.
Hydraulic Drive Draw Stud with Gasket 20x10mm Knockout Puncher Parts - Features: 1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information; 2.If you have any questions about the item,please provide us the Manufacturing Part Number for checking,your profits will be guaranteed. 3.The excellent material makes the product wear-resistant and durable. 4.Replacement draw studs for hydraulic drivers and please confirm the model number carefully to ensure that you can buy the correct parts. 5.Unique punch profile Also splits slugs for easier slug removal. 6.Suitable for hydraulic knockout die less than 32.6MM. Specifications:.
Greenlee 767 Hydraulic Knockout Set - MAKE: GREENLEE. MODEL: 767 KNOCKOUT SE. INCLUDED: MAIN PUMP, 2 KNOCKOUT PULLERS, A FEW DIFFERENT SIZE CONDUITS, RATCHET. LOWER 48 OF THE UNITED STATES ONLY. YOU GET WHAT YOU SEE IN THE PICTURES. LOVELAND,CO 80537.
Conduit Size Knockout Die 3-1/2" KD-3-1/2 - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
Milwaukee 2677-23 M18 FORCELOGIC 6T Knockout Tool 1/2" - 4" Kit - This knockout punch tool is specifically designed to be the ideal mild steel punching tool. It is powerful enough to punch up to 4” holes in 14 gauge mild steel. It is also 40% lighter weight than other 6T knockouts available.
VEVOR CH-60 Hydraulic Busbar Hole Puncher 31 Ton Knockout Punch Set Max 10mm - 【EXCELLENT PUNCHING & CH-60】 - Punching force: 31T/310KN; Depth of throat: 3.74"/95 mm; Puncher Aperture(4 pairs): 3/8"(ф10.5 mm), 1/2"(ф13.8 mm), 5/8"(ф17.5 mm), 3/4"(ф20.5 mm). The punch dies are made of high carbon tungsten steel and not easy to wear off.
Greenlee 7646-A hydraulic knockout punch with extra punches ect. - Multiple punches including a 2.5" and 3" Extra bolts, punches. I think these are for manual knockouts. Punches from 1/2" to 2". I tested the pump after I emptied and filled it up with fresh hydraulic oil.
TEMCo Hydraulic Knockout Punch TH0004 - Electrical Conduit Hole Cutter Set KO... - Its compact design is especially designed for field use on construction sites and maintenance jobs. Quick, effortless and simple to operate. The TH0004 punch has a 5 Year Warranty. 6 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2".
Greenlee Speed Punch 7212SP-2P 2” - New from distressed packaging 30 day seller paid return policy Buy with confidence Will receive exactly as pictured and only what is pictured. Please see photosGreenlee Speed Punch 7212SP-2P 2”. Location C-1D-5-4
Knockout Draw Stud for Hydraulic Hole Opener Thread Dia 20MM/10MM - Features: 1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information; 2.If you have any questions about the item,please provide us the Manufacturing Part Number for checking,your profits will be guaranteed. 3.The excellent material makes the product wear-resistant and durable. 4.Replacement draw studs for hydraulic drivers and please confirm the model number carefully to ensure that you can buy the correct parts. 5.Unique punch profile Also splits slugs for easier slug removal. 6.Suitable for hydraulic knockout die less than 32.6MM. Specifications:.
Black Hydraulic Drivers Draw Stud for Hydraulic Hole Opener Thread Dia 20MM/10MM - Features: 1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information; 2.If you have any questions about the item,please provide us the Manufacturing Part Number for checking,your profits will be guaranteed. 3.The excellent material makes the product wear-resistant and durable. 4.Replacement draw studs for hydraulic drivers and please confirm the model number carefully to ensure that you can buy the correct parts. 5.Unique punch profile Also splits slugs for easier slug removal. 6.Suitable for hydraulic knockout die less than 32.6MM. Specifications:.
10 Ton 1/2" to 2" Hydraulic Knockout Punch Driver Tool With 6 Dies Kit - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) Features: 6 Dies & Punches Interchangeable to Meet Different Needs.
Greenlee 7238SB Slug-Buster Knockout Kit Ratchet Punch Set - Greenlee 7238SB Slug-Buster Knockout Kit Ratchet Wrench Punch Set. See photos for complete details and condition. Look closely at the Imperfections and surface rust. Please note the 1/2” draw stud is damaged the bearing does not stay on the stud. Also note screw holding hinge together on box, sold as is.
10T Hydraulic Knockout Hole Punch Driver Kit 1/2 to 2 Inch With 6 Dies Hole New - Specifications: Punching Die Material: Steel Stroke: 25 mm / 1" Stroke: 25 Mm / 1" Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22mm), 1.115" (27.5mm), 1.362" (34mm), 1.701"(43mm), 1.951"(49mm), 2.416"(60mm) Punches materials: Steel, stainless steel, brass, copper, aluminum (soft alloys only, not for use with 7075 or other superalloys), fiberglass, plastic, and more. Product Description:.
^^ GREENLEE 7806SB Quick Draw Punch Driver Kit (RFU61) - No accessories including standard power cord/cable. We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided.
GREENLEE 5 Pieces Conduit Knockout Punch And Die Set (sizes below) - For sale I have GREENLEE 5 Pieces Conduit Knockout Punch And Die Set (sizes below). Item Condition: In good shape. Sizes include 3/4", 1", 1 1/2", 2", 2 1/2. With an inventory that is changing daily, our philosophy is that no tool should be discarded.
Hydraulic Hole Opener Fittings with Gasket Knockout Puncher Parts 188g - Specification: Material: Iron Color: Black Size: Small tie rod: Thread diameter of 20mm/10mm, length of 98mm Lock cap: 24mm Gasket: 41.5mm Weight: 189g Feature: 1.Note: The diameter of the mold is less than 27.5mm, use a small pull bar. 2.Use: hydraulic hole opener accessories. 3.Every product has a unique manufacturing part number label on the inner package that proves it has been qualified,which include Part Number,model number and inspection date information. Package Include: 1 x Hydraulic Drivers Draw Stud 1 x Lock Cap 1 x Gasket".
Black Hydraulic Hole Opener Fittings with Gasket Knockout Puncher Parts - Specification: Material: Iron Color: Black Size: Small tie rod: Thread diameter of 20mm/10mm, length of 98mm Lock cap: 24mm Gasket: 41.5mm Weight: 189g Feature: 1.Note: The diameter of the mold is less than 27.5mm, use a small pull bar. 2.Use: hydraulic hole opener accessories. 3.Every product has a unique manufacturing part number label on the inner package that proves it has been qualified,which include Part Number,model number and inspection date information. Package Include: 1 x Hydraulic Drivers Draw Stud 1 x Lock Cap 1 x Gasket.
Milwaukee 10-Ton Knockout Tool Set 2676-20 - - Milwaukee 10-Ton Knockout Tool Set 2676-20 -.SOLD FOR PARTS OR REPAIR The motor is working, but missing the buttonPARTS MISSING SEE PICTURES FOR DETAILSBATTERY NOT INCLUDED
Portable Metal Hole Digger Hydraulic Punch Kit Hydraulic Hole Punching Device US - Description This hydraulic hole punching machine is made of high-quality steel and plastic, which is strong, durable, and not easy to deform. It has a tonnage of 6T/13227.7lbs, which is large enough to meet your daily needs. It is suitable for processing stainless steel tubes within 1 mm/0.03inch and iron plates within 1.5 mm/0.05inch.
1/2 to 2 Inch Electrical Conduit Hole Cutter Set KO Tool Kit Metal Sheet Puncher - 💎Round Knockout Punches: 1/2",3/4",1",1 1/4", 1 1/2",2". 💎Allow unlimited driver orientation to simplify access to work area. Sheet Count 8. 💎Made of aluminum alloy, lightweight design for portable and fast work,make one-person operation easier.
Greenlee Kcc-Qd2 Knock Out Case - Hassay Savage Co 21544 Plain Bushing,# Iv,Id2-1/4 In,L 5 In. Knock Out Case. Cleveland C15063 Screw Machine Drill Bit, 17/64 In Size, 135 Degrees Point. General Purpose. & Recepticles. Electrical Outlets.
13 Tons KO Hydraulic Knockout Punch Driver Electrical Conduit Hole Cutter Tool - Type: Hydraulic Knockout Punch Driver and Cylinder. Compatible With: TEMCo, Greenlee, and other draw studs/arbors, and punch and die sets. Punching Force: 13 US Tons. You will need a suitable adapter to use the item in your country.
Eclipse Tools 902-482 Tuff Punch with Swivel Head and Type C Punch/Die Sets - Hydraulic Knockout Punch with Swivel Head and Type C punch/die sets. Lightweight design for fast, easy one-person operation. Allows unlimited driver orientation to simplify access to work area. Round knockout punches type C: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2".
Greenlee 767 746 Hydraulic Hand Pump for Knockout Punch (parts only) ED4U #2201 - Was leaking oil into case. Ram moves until pump runs out of fluid. Likely needs seals. AMB Serial #. See pics for actual item you will receive.Shelf #A2D ElectricDealsForYou Item #3007A. I am happy to drive to catch the Regional Truck if necessary; mileage fee will apply.
Enerpac 10 Piece Knockout Punch Set w/ P-142 Hydraulic Hand Pump - Used, in good condition with some scuffs and scratches from normal use and storage. We have tested this unit and found it to be in good working condition. We do not have any manuals or accessories other than what is shown in the photos. We are not the end user of this item so we are not sure if this kit is complete so be sure to look at all the photos to see what you will receive.\ We are offering free shipping to the 48 contiguous states in the USA.
TEMCo TH0397 – Manual Knockout Punch Driver Kit for ½ inch to 1-1/4” inch Ele... - Draw Stud threads are compatible with THA001 and THA013 draw studs, allowing for use on TEMCo hydraulic drivers TH0004 and TH0037 or equivalent. Slug splitting design on punches allows for easier slug removal the smooth operation leaves the round hole with clean edges and a uniform size.
🔥Greenlee Hydraulic Punch Driver W/ 25 Pin Panel Punch 7806Sb 34420 - 🔥GREENLEE 7806SB HYDRAULIC PUNCH DRIVER. 34420 IN CASE. W/ RS232 25 PIN D-SUBMINIATURE PANEL PUNCH. ORDERS PUT IN BEFORE 8 AM WILL GO OUT. WE ARE ALWAYS HERE TO HELP YOU. WE ARE HAPPY TO HELP! GREY SHELF #2 SHELF 10 CMR.
Greenlee 730BB-1-1/4 1-1/4" Hole Size Standard Round Knockout Punch Unit - Greenlee 730BB-1-1/4 Specifications Greenlee 730BB-1-1/4 Features • Operation -Operate with battery-powered, hydraulic, ratchet or manual drivers. • When used with battery-powered, hydraulic or ratchet drivers buy the punch and die only; the draw stud is part of the driver kit.
Heavy-duty Hydraulic Hole Punching Tool Copper Hole Puncher CH-60A Type 148027 - 1 Set of Hydraulic Hole Punching Tool Copper Hole Puncher CH-60A (148027). It is split hole puncher. It is popular in electricity industry, construction,etc. It need to work with a pump. It could punch 0.41"(ф10.5mm), 0.54"(ф13.8mm), 0.67"(ф17mm), 0.81"(ф20.5mm).
Greenlee 730 Round Radio Chassis Punch 1-7/8" - Greenlee 730 Round Radio Chassis Punch 1-7/8". See the pictures for the condition. For additional questions or pictures please reach out.
Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set 1/2-2" Metal Sheet - Knockout Punch Driver Kit: Standard Output Pressure: 6.6 tons. The maximum output pressure is 8 tons. 6 Die Sets for conduit fitting size: ½, ¾, 1, 1¼, 1 ½, 2". Allow unlimited driver orientation to simplify access to work area.Lightweight design for portable and fast work,make one-person operation easier.
Eclipse Tools 902-482 Tuff Punch with Swivel Head and Type C Punch/Die Sets - Hydraulic Knockout Punch with Swivel Head and Type C punch/die sets. Lightweight design for fast, easy one-person operation. Allows unlimited driver orientation to simplify access to work area. Round knockout punches type C: 1/2", 3/4", 1", 1-1/4", 1-1/2", 2".
TEMCo Hydraulic Knockout Punch TH0004 - Electrical Conduit Hole Cutter Set KO... - TEMCo Hydraulic Knockout Punch TH0004 - Electrical Conduit Hole Cutter Set KO Tool Kit 5 Year Warranty. Part Number: TH0004. Item model number: TH0004. Manufacturer: TEMCo. 6 Die Sets for conduit fitting size: 12, 34, 1, 114, 1 12, 2".
SEEKONK 1-1/8 Día Radio Chassis Punch Knockout 5110-293-0105 - Further research may be required to properly insure that you are getting the item that you want. With signs of being used, such as scuffs, scratches, from age, use, storage and handling.
TEMCo TH0397 – Manual Knockout Punch Driver Kit for ½ inch to 1-1/4” inch Ele... - Draw Stud threads are compatible with THA001 and THA013 draw studs, allowing for use on TEMCo hydraulic drivers TH0004 and TH0037 or equivalent. Manufacturer : TEMCo. Slug splitting design on punches allows for easier slug removal the smooth operation leaves the round hole with clean edges and a uniform size.
Mophorn 10 Ton 1/2" to 2" Hydraulic Knockout Punch Driver Tool Kit Electrical... - Mophorn 10 Ton 1/2" to 2" Hydraulic Knockout Punch Driver Tool Kit Electrical Conduit Hole Cutter Set KO Tool Kit with 6 Dies Hole Complete Tool (Knockout Punches). Manufacturer: Mophorn. Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump.
Intbuying 110V Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine - Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine 110V. Used for punching on steel plate, angle steel plate, iron plate, copper plate, aluminum plate, etc. Portable, small, easy to operate, saving power and quick to punch.
Milwaukee 10-Ton Knockout Tool Set 2676-20 - - Milwaukee 10-Ton Knockout Tool Set 2676-20 -. SOLD FOR PARTS OR REPAIR PARTS MISSING SEE PICTURES FOR DETAILS BATTERY NOT INCLUDED
Knockout Punch Drivers for 1/2-2” Electrical Conduit Hole Metal Sheet Mild Steel - Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works for use in tight areas. Manual drive knockout punches, for use with ratchet, wrench, or electric driver.
Greenlee 7304 KnockOut Punch & Die 2-1/2”-4” 7306 7310 **GREAT SHAPE** #2 - Here we have a Greenlee 7304 KnockOut Punch & Die for 2-1/2”-4”.With questions call Alex.You wi receive exactly what pictured: nothing more — nothing less.Please check out our other listings for more Greenlee and Ridgid tools.
10T Hydraulic Knockout Punch Hand Pump 6 Dies Hole Tool Driver Kit w/ Metal Case - This 10-ton hydraulic punch driver kit features hydraulic mechanism for powerful drilling holes on different material such as steel and stainless steel. It comes with 6 sets of interchangeable dies & punches of 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" for any installation and repairment on wire pipelines and instruments in metallurgy, petrol, electronics, etc.
9 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies - This 9-ton hydraulic punch driver kit features hydraulic mechanism for powerful drilling holes on different material such as steel and stainless steel. It comes with 6 sets of interchangeable dies & punches of 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" for any installation and repairment on wire pipelines and instruments of metallurgy, petrol, electronics, etc.
15 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 10 Dies - This 15-ton hydraulic punch driver kit features hydraulic mechanism for powerful drilling holes on different material such as steel and stainless steel. It comes with 10 sets of interchangeable dies & punches of 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 3 1/2" and 4" for any installation and repairment on wire pipelines and instruments of construction sites, metallurgy, petrol, electronics, etc.
15 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 10 Dies - This 15-ton hydraulic punch driver kit features hydraulic mechanism for powerful drilling holes on different material such as steel and stainless steel. It comes with 10 sets of interchangeable dies & punches of 1/2", 3/4", 1", 1 1/4", 1 1/2", 2", 2 1/2", 3", 3 1/2" and 4" for any installation and repairment on wire pipelines and instruments of construction sites, metallurgy, petrol, electronics, etc.
GREENLEE No. 731 5/8" Square Radio Chassis Punch. ED4U #2182-G - GREENLEE No. 731 5/8" Square Radio Chassis Punch. No box. Good pre-owned condition. Threads are good and cutting edges are still sharp. See pictures for actual item(s) you will receive. ED4U #2182-G. Shelf# A4C.
Greenlee/Current Tools C7310Sb Slugbuster Knockout Punch Set 1/2" - 4" Conduit - Greenlee hydraulic "Slug Buster" knock-out punch and die set. Model: 7310SB / 154PM. Sizes include 1/2" to 4". All parts are Greenlee except: 3 1/2" punch and die, 3" punch and die, 2 1/2" punch, 1 1/2" punch and die, 1 1/4" punch and die, 1" punch, and the tool case.
CGOLDENWALL JP-20 Short Electric handy hydraulic hole puncher - CGOLDENWALL JP-20 Short Electric handy hydraulic hole puncher punching 6mm thickness Iron/steel plate and 8mm thickness copper/aluminum plate Certificate CE ROHS (JP-20C: 3mm-6mm width angle steel). New in open case.
4 Prong Leather Prong Punch Tool 4mm Steel Prong Row Round Hole Stitching Chisel - Features1. Made of 45# steel, fine polishing, sharp edge, durable and long-lasting. 2. With anti-slip handles, and sharp teeth to make smooth accurate line spacing.3. Special design, save energy, can easily cut through multiple layers of fabric. 4. The prong row is used to punch straight lines for wallets, card-holders, shoes, bags, etc. SpecificationMaterial: 45# steelProng pitch: Approx 4mmHandle width:8mmTotal width:22mmTotal length: (Approx) 124mm/5-inch.
2 Prong Leather Prong Punch Tool 6mm Steel Prong Row Round Hole Stitching Chisel - Features1. Made of 45# steel, fine polishing, sharp edge, durable and long-lasting. 2. With anti-slip handles, and sharp teeth to make smooth accurate line spacing.3. Special design, save energy, can easily cut through multiple layers of fabric. 4. The prong row is used to punch straight lines for wallets, card-holders, shoes, bags, etc. SpecificationMaterial: 45# steelProng pitch: Approx 6mmHandle width:8mmTotal width:16mmTotal length: (Approx) 126mm/5-inch.
6 Prong Leather Prong Punch Tool 8mm Steel Prong Row Round Hole Stitching Chisel - Features1. Made of 45# steel, fine polishing, sharp edge, durable and long-lasting. 2. With anti-slip handles, and sharp teeth to make smooth accurate line spacing.3. Special design, save energy, can easily cut through multiple layers of fabric. 4. The prong row is used to punch straight lines for wallets, card-holders, shoes, bags, etc. SpecificationMaterial: 45# steelProng pitch: Approx 8mmHandle width:8mmTotal width:51mmTotal length: (Approx) 128mm/5-inch.
4 Prong Leather Prong Punch Tool 6mm Steel Prong Row Round Hole Stitching Chisel - Features1. Made of 45# steel, fine polishing, sharp edge, durable and long-lasting. 2. With anti-slip handles, and sharp teeth to make smooth accurate line spacing.3. Special design, save energy, can easily cut through multiple layers of fabric. 4. The prong row is used to punch straight lines for wallets, card-holders, shoes, bags, etc. SpecificationMaterial: 45# steelProng pitch: Approx 6mmHandle width:8mmTotal width:28mmTotal length: (Approx) 126mm/5-inch.
2/4/6 Prong Leather Prong Punch 6mm Steel Prong Row Round Hole Stitching Chisel - Features1. Made of 45# steel, fine polishing, sharp edge, durable and long-lasting. 2. With anti-slip handles, and sharp teeth to make smooth accurate line spacing.3. Special design, save energy, can easily cut through multiple layers of fabric. 4. The prong row is used to punch straight lines for wallets, card-holders, shoes, bags, etc. SpecificationMaterial: 45# steelProng pitch: Approx 6mmHandle width:8mmTotal width:16/28/40mmTotal length: (Approx) 126mm/5-inch.
4 Prong Leather Prong Punch Tool 8mm Steel Prong Row Round Hole Stitching Chisel - Features1. Made of 45# steel, fine polishing, sharp edge, durable and long-lasting. 2. With anti-slip handles, and sharp teeth to make smooth accurate line spacing.3. Special design, save energy, can easily cut through multiple layers of fabric. 4. The prong row is used to punch straight lines for wallets, card-holders, shoes, bags, etc. SpecificationMaterial: 45# steelProng pitch: Approx 8mmHandle width:8mmTotal width:35mmTotal length: (Approx) 128mm/5-inch.
6 Prong Leather Prong Punch Tool 6mm Steel Prong Row Round Hole Stitching Chisel - Features1. Made of 45# steel, fine polishing, sharp edge, durable and long-lasting. 2. With anti-slip handles, and sharp teeth to make smooth accurate line spacing.3. Special design, save energy, can easily cut through multiple layers of fabric. 4. The prong row is used to punch straight lines for wallets, card-holders, shoes, bags, etc. SpecificationMaterial: 45# steelProng pitch: Approx 6mmHandle width:8mmTotal width:40mmTotal length: (Approx) 126mm/5-inch.
2/4/6 Prong Leather Prong Punch 5mm Steel Prong Row Round Hole Stitching Chisel - Features1. Made of 45# steel, fine polishing, sharp edge, durable and long-lasting. 2. With anti-slip handles, and sharp teeth to make smooth accurate line spacing.3. Special design, save energy, can easily cut through multiple layers of fabric. 4. The prong row is used to punch straight lines for wallets, card-holders, shoes, bags, etc. SpecificationMaterial: 45# steelProng pitch: Approx 5mmHandle width:8mmTotal width:16/25/35mmTotal length: (Approx) 125mm/5-inch.
2 Prong Leather Prong Punch Tool 8mm Steel Prong Row Round Hole Stitching Chisel - Features1. Made of 45# steel, fine polishing, sharp edge, durable and long-lasting. 2. With anti-slip handles, and sharp teeth to make smooth accurate line spacing.3. Special design, save energy, can easily cut through multiple layers of fabric. 4. The prong row is used to punch straight lines for wallets, card-holders, shoes, bags, etc. SpecificationMaterial: 45# steelProng pitch: Approx 8mmHandle width:8mmTotal width:17mmTotal length: (Approx) 128mm/5-inch.
6 Prong Leather Prong Punch Tool 5mm Steel Prong Row Round Hole Stitching Chisel - Features1. Made of 45# steel, fine polishing, sharp edge, durable and long-lasting. 2. With anti-slip handles, and sharp teeth to make smooth accurate line spacing.3. Special design, save energy, can easily cut through multiple layers of fabric. 4. The prong row is used to punch straight lines for wallets, card-holders, shoes, bags, etc. SpecificationMaterial: 45# steelProng pitch: Approx 5mmHandle width:8mmTotal width:35mmTotal length: (Approx) 125mm/5-inch.
4 Prong Leather Prong Punch Tool 5mm Steel Prong Row Round Hole Stitching Chisel - Features1. Made of 45# steel, fine polishing, sharp edge, durable and long-lasting. 2. With anti-slip handles, and sharp teeth to make smooth accurate line spacing.3. Special design, save energy, can easily cut through multiple layers of fabric. 4. The prong row is used to punch straight lines for wallets, card-holders, shoes, bags, etc. SpecificationMaterial: 45# steelProng pitch: Approx 5mmHandle width:8mmTotal width:25mmTotal length: (Approx) 125mm/5-inch.
2 Prong Leather Prong Punch Tool 4mm Steel Prong Row Round Hole Stitching Chisel - Features1. Made of 45# steel, fine polishing, sharp edge, durable and long-lasting. 2. With anti-slip handles, and sharp teeth to make smooth accurate line spacing.3. Special design, save energy, can easily cut through multiple layers of fabric. 4. The prong row is used to punch straight lines for wallets, card-holders, shoes, bags, etc. SpecificationMaterial: 45# steelProng pitch: Approx 4mmHandle width:8mmTotal width:16mmTotal length: (Approx) 124mm/5-inch.
2 Prong Leather Prong Punch Tool 5mm Steel Prong Row Round Hole Stitching Chisel - Features1. Made of 45# steel, fine polishing, sharp edge, durable and long-lasting. 2. With anti-slip handles, and sharp teeth to make smooth accurate line spacing.3. Special design, save energy, can easily cut through multiple layers of fabric. 4. The prong row is used to punch straight lines for wallets, card-holders, shoes, bags, etc. SpecificationMaterial: 45# steelProng pitch: Approx 5mmHandle width:8mmTotal width:16mmTotal length: (Approx) 125mm/5-inch.
6 Prong Leather Prong Punch Tool 4mm Steel Prong Row Round Hole Stitching Chisel - Features1. Made of 45# steel, fine polishing, sharp edge, durable and long-lasting. 2. With anti-slip handles, and sharp teeth to make smooth accurate line spacing.3. Special design, save energy, can easily cut through multiple layers of fabric. 4. The prong row is used to punch straight lines for wallets, card-holders, shoes, bags, etc. SpecificationMaterial: 45# steelProng pitch: Approx 4mmHandle width:8mmTotal width:29mmTotal length: (Approx) 124mm/5-inch.
2/4/6 Prong Leather Prong Punch 4mm Steel Prong Row Round Hole Stitching Chisel - Features1. Made of 45# steel, fine polishing, sharp edge, durable and long-lasting. 2. With anti-slip handles, and sharp teeth to make smooth accurate line spacing.3. Special design, save energy, can easily cut through multiple layers of fabric. 4. The prong row is used to punch straight lines for wallets, card-holders, shoes, bags, etc. SpecificationMaterial: 45# steelProng pitch: Approx 4mmHandle width:8mmTotal width:16/22/29mmTotal length: (Approx) 124mm/5-inch.
Greenlee 7906Sb 9 Piece Hydraulic Punch Driver Set, 10 Ga. - You can use this hydraulic punch driver set on 1/2" to 2" conduit and pipe size. With Greenlee's 7906SB 9 Piece Hydraulic Punch Driver Set, you can make quick work of your punching needs. Walter Prototyp Ep2221302-Unc1/4 Spiral Point Tap, 1/4"-20, Taper, Unc, 3.
10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) .
Greenlee 7906Sb Set Of 8 Knock Out Punches 1/2" To 2" - We do not buy direct from the manufacturers or from authorized dealers. The serial numbers in the pictures are covered to prevent mischief by hackers or others that want to cause harm. The item is sold as is.
Hydraulic Punch Driver Kit Manual Holesaw Knockout Puncher Tool Electrical Condu - 10 Ton 1/2" to 2" Hydraulic Knockout Punch Driver Tool Kit Electrical Conduit Hole Cutter Set KO Tool Kit with 6 Dies Hole Complete Tool (Knockout Punches). Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump.
Set of 5 Pcs Long & 8Pcs Short Drive Bolt Catch Roll Pin Punch Set-Ship From USA - All pins are hardened & Ground. Long Pin Drive set of 5 Pcs Long and 8" Short length. All Lathe Tools Asseccories Milling Machine Tool Vices & work Holding Jewelry & Watch Making Do It Yourself (DIY Tools) HSS Cutting & Finishing Tools Other.
Iron Hydraulic Drivers Draw Stud Knockout Punches Pull Rod with Gasket - Features: 1.The excellent material makes the product wear-resistant and durable. 2.Replacement draw studs for hydraulic drivers and please confirm the model number carefully to ensure that you can buy the correct parts. 3.Unique punch profile Also splits slugs for easier slug removal. 4.Suitable for hydraulic knockout die less than 32.6MM. Specifications: Material: Iron Color: Black Size:Thread Dia:20 x 10mm/0.79 x 0.39inch Lock cap: 24mm Gasket: 41.5mm Length:98mm/3.86inch Weight: 189 g Package include: 1 x Hydraulic Drivers Draw Stud 1 x Lock Cap .
Current SB ½"-2" slugbuster knockout pump ram Greenlee 746,767, - My pump and ram are rebuilt. all in a VG plastic carrying case as pictured. Knockout set, Pump and ram are in very good condition No leaks. (1) Lightly used ,Klein slugbuster type set 1/2" -2". (3) nice Current greenlee spacers the 3 different sizes.
Manual Knockout Punch Driver Set Electrical Conduit Hole Size Copper Aluminum Br - Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works great in tight areas. Manual drive knockout punches, for use with ratchet, wrench, or electric driver.
Greenlee 7646 Hydraulic Driver-Punch, 10 ga, Stainless Steel - Catalog Number 7646. Manufacturer Greenlee Textron. Material Punch up to 10 ga mild steel or 12 ga stainless steel. Consist Of 2 7/16" hydraulic draw stud. Consist Of 3 3/4" hydraulic draw stud. For Max Stainless Steel Thickness 10 ga.
Greenlee 2 1/2" Conduit Sz Knockout Punch/Die Set Ed4U #2029-C - GREENLEE 2 1/2" CONDUIT SZ KNOCKOUT PUNCH/DIE SET. Excellent preowned item, appears used very little?. See pics for actual item you will receive.Shelf # A4C.ElectricDealsForYou Item # 2029. I am happy to drive to catch the Regional Truck if necessary; mileage fee will apply.
Yescom 6 Ton Manual Knockout Hole Punch Driver Kit 1/2" to 2" 6 Dies Hole Cutter - 6 Ton Manual Knockout Hole Punch Driver Kit consists of 1 wrench, 1 sleeve, 2 draw studs, 6 punches, and 1 carrying case. With 6 punch sizes including 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" and a long wrench, it's easy to punch holes in mild steel up to 10 gauge, aluminum, fiberglass, and plastics.
Yessources 6 Ton Knockout Puncher Tool Kit 6 Punch Dies 1/2 to 2 Inch Repairing - 6 Ton Manual Knockout Hole Punch Driver Kit consists of 1 wrench, 1 sleeve, 2 draw studs, 6 punches, and 1 carrying case. With 6 punch sizes including 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" and a long wrench, it's easy to punch holes in mild steel up to 10 gauge, aluminum, fiberglass, and plastics.
Lkf Syk-15 Tl29225 Hydraulic Knockout Punch Kit - Part Number: TL29225. MPN: TL29225. LKF SYK-15 TL29225 HYDRAULIC KNOCKOUT PUNCH KIT This item is new in a open box. The box is very lightly freight worn. Manufacturer: LKF. Type: HOLE PUNCHER. Notes: This item is new in a open box.
10 Ton 1/2" to 2" Hydraulic Knockout Punch Driver Tool With 6 Dies Kit - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) .
Labwork Hydraulic Knockout Hole Punch Driver Kit 10 Ton 1/2" to 2" With 6 Dies - Fitment: Wide Application: This Manual Metal Stud Punch Tool Can Be Used For Professional Equipment Drilling, Punching 11 Ga Mild Steel, Iron Plate, And Also Can Be Used For Personal Diy, Furniture Installation, Etc. Description: -Punching Die Material: Steel -Stroke: 25 Mm / 1" -Max Pressure:10 ton -6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" -Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) -Max Thickness for Steel: 3.2 mm ( 11 gauge ) -2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam.
Findmall 10 Ton 1/2" - 2" Hydraulic Knockout Punch Driver Tool Kit With 6 Dies - Specification: Punching Die Material: Steel Stroke: 25 mm / 1" Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22mm), 1.115" (27.5mm), 1.362" (34mm), 1.701"(43mm), 1.951"(49mm), 2.416"(60mm) Punches materials: Steel, stainless steel, brass, copper, aluminum (soft alloys only, not for use with 7075 or other superalloys), fiberglass, plastic, and more. Feature:.
Hydraulic Knockout Punch Driver 10 Ton 1/2" to 2" With 6 Dies Tool Kit - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) .
10 Ton Hydraulic Knockout Hole Punch Driver Kit 1/2 to 2 inch with 6 Dies - Description: 10 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set Specifications: Max Pressure:10 ton 6 x Dies: 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" Max Thickness for Stainless Steel: 2 mm ( 14 gauge ) Max Thickness for Steel: 3.2 mm ( 11 gauge ) 2 x Draw Studs: 3.1"L x 0.31"Diam & 3.2"L x 0.3"Diam Actual Hole Size: 0.885" (22.5mm), 1.115" (28.3mm), 1.362" (34.6mm), 1.701"(43.2mm), 1.951"(49.6mm), 2.416"(61.5mm) .
Knockout Punch Driver Kit for 1/2" to 1-1/4” Electrical Conduit Hole Metal Sheet - Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size. Manual punch works for use in tight areas. Manual drive knockout punches, for use with ratchet, wrench, or electric driver.
Eclipse 902-545 TuffPunch 15 Ton Hydraulic Knockout Punch - The TuffPunch 15 Ton Hydraulic Knockout Set provides 15 tons hydraulic force with an easy, one-person operation. Hydraulic tools provide a greater level of force than hand tools, and the punch/die sets are easily changed and leave no burns or rough/sharp edges.
Greenlee LS100XB INTELLIPUNCH 11-Ton Tool with Case - Model GREE LS100XB. • 360° Rotating Head - Rugged, patent-pending swivel design to punch at any angle. • Application : Punch conduit size holes in mild steel, stainless steel, aluminum, fiberglass and plastic.
Hydraulic Knockout Punch Electrical Conduit Hole Cutter Set KO Tool Kit 1/2 to 2 - Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency.
Hydraulic Punch Driver Kit 14 Pc - 14 Piece Hydraulic Punch. This 14 piece hydraulic punch kit. hydraulic punch kit is faster than. makes it quick and easy to punch holes. need to punch a bunch of holes, this. Punch holes up to 2-3/8 in.
Greenlee Dsh-S3/4 3/4 In Round Knockout Draw Stud, Steel - Sandusky Lee Ic00461866-07 Wood Cubbie Cabinet, 18 In D X 66 In H X 46 In W, 4. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
Blechlocher Stanzensatz Tristar Plus Set - M 16 bis M 40 Hydraulic punch heads - Blechlocher Ergänzungs Stanzensatz Tristar Plus Set. Stanzensatz aus 5 Tristar Plus Stempel und Matrizen komplett im TransportkastenTechnische Daten. Tristar Plus Stempel und Matrizen M 16 bis M 40, 16,2 mm, 20,4 mm, 25,4 mm, 32,5 mm, 40,5 mm.
CH-60 Hydraulic Busbar Hole Puncher 31 Ton Knockout Punch Set Max 10mm - 【EXCELLENT PUNCHING & CH-60】 - Punching force: 31T/310KN; Depth of throat: 3.74"/95 mm; Puncher Aperture(4 pairs): 3/8"(ф10.5 mm), 1/2"(ф13.8 mm), 5/8"(ф17.5 mm), 3/4"(ф20.5 mm). The punch dies are made of high carbon tungsten steel and not easy to wear off.
Greenlee Knock Out - 1/2" Conduit PN: 14722 - Greenlee Knock Out Die - 1/2". 1/2" Conduit Size Die. Punches and dies are marked with catalog numbers and sizes for quick part identification.
Hole Puncher Die Set 22-60mm, 7/8"-2 3/8" (B-set) - Plate thickness (steel): 0.06" Max. plate thickness (iron): 0.12" Weight: 7 lbs. Hole Puncher Die Set 22-60mm, 7/8"-2 3/8" (B-set). Hole Puncher Die Set 22 - 60 mm. Thread type (22, 27 mm dies): No thread (holding nut).
Hole Puncher Die Set 16-51 mm, 5/8"-2" (A-set) - Plate thickness (steel): 0.08" Max. plate thickness (iron): 0.16" Weight: 10 lbs. Hole Puncher Die Set 16 - 51 mm. Thread type (16, 20, 26 mm dies): No thread (holding nut). Die size: 16, 20, 26, 32, 39, 51 mm.
20x10mm Hydraulic Driver Draw Stud Knockout Punches Pull Rod with Lock Cap - Features: 1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information; 2.If you have any questions about the item,please provide us the Manufacturing Part Number for checking,your profits will be guaranteed. 3.The excellent material makes the product wear-resistant and durable. 4.Replacement draw studs for hydraulic drivers and please confirm the model number carefully to ensure that you can buy the correct parts. 5.Unique punch profile Also splits slugs for easier slug removal. 6.Suitable for hydraulic knockout die less than 32.6MM. Specifications:.
GREENLEE 1 1/4" 43.2mm CONDUIT KNOCKOUT DIE (NO PUNCH) 5004013 PREOWNED - Greenlee conduit knock-out die. Punch is not included. Size: 1 1/4". No. 5004013. Preowned in good usable condition. Sharp die edge. Three are available. You will be getting one of these pictured in the fourth picture.
Greenlee Hydraulic Punch Driver Set 767 - HI up for sale is this Greenlee Hydraulic Punch Driver Set 767, this set is incomplete and is being sold as seen in the photos.
Gardner Bender 2-Speed Hand Pump, 10000PSI (700BAR Max), PH-20 - Gardner Bender 2-Speed Hand Pump. NOT an attempt to deceive or mislead. NOT allow DHL. ALL photos. An oversight or lack of knowledge on our part is. NO FURTHER INFORMATION ON THIS PRODUCT. We are committed to work with you on a resolution.
Greenlee 767 Knock Out Hydraulic Punch & Die Set 1/2 to 4" Free Ship - Greenlee 767 Knock Out Hydraulic Punch & Die Set 1/2 to 4" Free Ship. Came from a local shop. Pump and ram both have some paint loss. Both function as they should. Does are in nice shape, comes with the extra bushings and adaptors. Sizes are 4”, 3 1/2” 3”, 2 1/2”, 2”, 1 1/2”, 1 1/4”, 1”, 3/4”, and 1/2”. The 2” die and cup is made by ENERPAC. All the rest are Greenlee. Comes as seen in photos free shipping to LOWER 48 STATES ONLYC-3 box #3
6 Greenlee Current Enerpac Conduit Knockout Punch & Die Set 1 1/2” 1 1/4” 1” - 6 GREENLEE CURRENT ENERPAC CONDUIT KNOCKOUT PUNCH & DIE SET 1 1/2” 1 1/4” 1”. The top row is Current 1 1/2” 1 1/4” Greenlee 1”. The bottom row is ENERPAC 1 1/2”, 1 1/2”, Greenlee 1”. Good used shape comes a sseen in photos free shippingC-3
Hydraulic Hole Punching Tool Kit with Double Acting Pump Copper Hole Puncher Set - It is split hole puncher. It is popular in electricity industry, construction, etc. It need to work with a pump. Electric Hydraulic Hole Punching Tool & Pump Set. 1set Hydraulic Hole Punching Tool with four dies (one of the four is in the puncher).
Greenlee 3-1/2" C-Punch & Die Set Assembly- 5004653/5004652-USED ONE TIME - Greenlee 3-1/2" C-Punch & Die Set Assembly- 5004653/5004652-USED ONE TIME. PREOWNED SO HAS THE EXPECTED BLEMISHES AND SCRATCHES BUT NOTHING MAJOR. STILL IN GOOD SHAPE. I SEE ONE SMALL KNICK ON THE OUTSIDE. WAS MY DADS. DONT MISS IT. YOU CAN BUY IT NOW. FAST FREE SHIPPING.
NEW 110V Electric Hydraulic Hole Puncher Steel Plate Machine 1300W Hand Tool - Electric Hydraulic Hole Puncher Steel Plate Hole Punching Machine 110V. Used for punching on steel plate, angle steel plate, iron plate, copper plate, aluminum plate, etc. Portable, small, easy to operate, saving power and quick to punch.
Ridgid Knockout Punch Set Metal Box 16"X9"X5" - We do not buy direct from the manufacturers or from authorized dealers. The serial numbers in the pictures are covered to prevent mischief by hackers or others that want to cause harm. The item is sold as is.
Greenlee 746 Hydraulic Knockout Ram And 767 Hand Pump Slug Buster - We do not buy direct from the manufacturers or from authorized dealers. The serial numbers in the pictures are covered to prevent mischief by hackers or others that want to cause harm. The item is sold as is.
Greenlee Av439 1 1/2" Conduit Punch Die Set - Model: AV439. Fork Lift or Loading Dock. We work hard to provide you with the lowest freight rates. Light surface rust. Local Pick Up Phone Number.
Enerpac Hydraulic Knockout Punch with 8 punches - YOU ARE PURCHASING THE KNOCKOUT SET THAT IS PICTURED. SET IS MISSING HYDRAULIC DRAW BAR. I GET A PRETTY GOOD PRICE NORMALLY 175.00 EAST OF THE MISSISSIPPI. OR I CAN PUT IT ON A PALLET AND GET IT READY FOR.
Milwaukee 2677-23 M18 1/2" to 4" 18-Volt Lithium-Ion Cordless Force Logic 6T - The M18 FORCE LOGIC 6 Ton Knockout Tool carries these benefits forward to service applications. It is powerful enough to punch up to 4 holes in 14-Gauge mild steel and 40% lighter weight. The EXACT punches and dies are rated for both mild and stainless steel punching.
Greenlee Gator ECCX tool hydraulic punch driver UA6PGL knockout - Greenlee UA6PGL knockout punch driver used with Gator ECCX tools. This adapter will accept the standard ¾ draw stud. Made in Germany by Klauke so you know that you are getting a quality piece.
Blackhawk Z1054,5 3-1/2" Knockout Set - BLACKHAWK Z1054,5 3-1/2" KNOCKOUT SET. Condition is "Used" in good condition. Z1054,5, $72.15 Each SET. + SHIPPING.
VEVOR 5 Ton Hydraulic Knockout Punch Driver Kit Conduit Hole 0.63"-0.98" 5 Dies - Why Choose VEVOR?. VEVOR CH-70 Hydraulic Busbar Hole Puncher 35 Ton Knockout Punch Set Max 12mm. VEVOR CH-60 Hydraulic Busbar Hole Puncher 31 Ton Knockout Punch Set Max 10mm. VEVOR Hydraulic Knockout Punch Set Hole Knockout Kit 6 Dies 1/2" to 2" 98KN 10T.
Greenlee 7646 Ram & Hand Pump Hydraulic Knockout Punch Driver Kit - Greenlee 7646 Includes Model GREE 7646. Greenlee 7646 Features • 767 Hydraulic Hand Pump. • Powerful 11-ton hydraulic ram. • 2113AA Draw Stud - 3/4" x 5-3/8". • 1614SS Draw Stud - 3/8" x 2-13/16" (Qty. ).
Greenlee 711C Stud Bushings (100 count) - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee DSBB-3/4 3/4" Manual Draw Stud - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee K2P-1 1" Conduit Size Slug-Buster® Knockout Punch Regular price - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee K2P-1-1/2 1-1/2" Conduit Size Slug-Buster® Knockout Punch - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee K2P-1-1/2-B 1-1/2" Conduit Size Slug-Buster® Knockout Punch - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee K2P-1-1/2 1-1/2" Conduit Size Slug-Buster® Knockout Punch - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee K2P-1-1/2-B 1-1/2" Conduit Size Slug-Buster® Knockout Punch - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee K2P-1-1/4 1-1/4" Conduit Size Slug-Buster® Knockout Punch - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee K2P-1-1/4-B 1-1/4" Conduit Size Slug-Buster® Knockout Punch - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee K2P-1-B 1" Conduit Size Slug-Buster® Knockout Punch - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Milwaukee 2677-23 M18 FORCELOGIC 6T Knockout Tool 1/2" - 4" Kit - • (1) M18 2.0 Compact Battery. • (2) Carrying Case. • (1) 3/4" Exact Rapid Reset Draw Stud. • Exact punches and dies are rated for both mild and stainless steel punching. • (1) 7/16" Exact Draw Stud.
Greenlee K3BB-3/4 3/4" Conduit Size Standard Round Manual Knockout Set - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee KCC-7672 Replacement case for 1/2" to 2" Ram and Hand Pump - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee KCC-7674 Replacement case for 1/2" to 4" Ram and Hand Pump - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee KCC-BB1-1/4 Replacement case for 1/2", 1-1/4" manual sets - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee KCC-BB2 Replacement case for 1-1/2", 2" manual sets - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee KCC-LD4 Replacement case for 2-1/2" - 4" Knockout Set - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee KD-1/2 1/2" Conduit Size Knockout Die - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee KD-2-1/2 2-1/2" Conduit Size Knockout Die - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee 36173 Replacement Die, 54mm - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee 35162G Replacement Die, 16.2mm - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Hedland flow tester nice unit - WE DO OUR VERY BEST TO DESCRIBE EACH ITEM AND ITS CONDITION. WE ARE OPEN 8AM TO 6PM MON-SAT. WE ARE LOCATED AT 3521 VICTORY BLVD STATEN ISLAND NY 10314.
Greenlee 3208AV Replacement Die, 1-1/2" - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee 32008 Replacement Die, 37mm - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee 32003 Replacement Die, 18.6" - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee 29451 Replacement Draw Stud, 7/16" - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee 1796AV Replacement Die, 2-5/8" - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee 1761AV Replacement Die, 15/16" - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee 1757AV Replacement Die, 2-1/2" - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee 12353G Replacement Die, 2-1/4" - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
Greenlee 12339 Replacement Die, 15/16" - Founded in 1862, Greenlee Tools got its start as a toolmaker when two brothers needed to manufacture their invention (a special drill surrounded by chisels). Greenlee is widely recognized as an industry leader for quality hand and industrial tools.
20x10mm Puncher Draw Stud with Lock Cap Hydraulic Knockout Accessories - Features: 1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information; 2.If you have any questions about the item,please provide us the Manufacturing Part Number for checking,your profits will be guaranteed. 3.The excellent material makes the product wear-resistant and durable. 4.Replacement draw studs for hydraulic drivers and please confirm the model number carefully to ensure that you can buy the correct parts. 5.Unique punch profile Also splits slugs for easier slug removal. 6.Suitable for hydraulic knockout die less than 32.6MM. Specifications:.
Hydraulic Knockout Punch Set Hole Punches 11 Piece Set New - Punches have three cutting edges, work on mild steel up to 11 gauge and stainless steel up to 16 gauge. These are high quality punches, made of heat treated carbon steel! You are not getting the hydraulic punch ram in the last picture, this is for reference only.
TEMCo THA100 Long English Knock Out Punch Draw Stud 3/4"-16 Thread - TEMCo ID: THA100. Designed for use with: the TEMCo TH0004 and TH0037 hydraulic knock out punches. "I have always been delighted with the service from TEMCo. About TEMCo. Type: 3/4"-16 English Thread draw stud.
TPA-8 6-ton Hydraulic Hole Opener Stainless Steel Metal Plate Drilling Tool 22mm - 【Travel】22mm. Screw the piston rod into the screw hole of the piston cylinder, and then insert the washer into the piston rod and then into the die. Then the piston rod is extended into the guide hole of the workpiece, and finally screwed into the punch to make the knife edge of the punch and the processing surface tightly combined, and the punch, workpiece and concave mold are reliably fixed.
VEVOR CH-60 Hydraulic Busbar Hole Puncher 31 Ton Knockout Punch Set Max 10mm - Why Choose VEVOR?. VEVOR Hydraulic Knockout Punch Set Hole Knockout Kit 6 Dies 1/2" to 2" 98KN 10T. VEVOR 15 Ton Hydraulic Knockout Punch Driver Kit Hole Tool 1/2"-4" with 10 Dies. VEVOR 10 Ton Hydraulic Knockout Punch Driver Kit 1/2"-2" Conduit Hole 6 Dies.
VEVOR CH-70 Hydraulic Busbar Hole Puncher 35 Ton Knockout Punch Set Max 12mm - Why Choose VEVOR?. VEVOR Hydraulic Knockout Punch Set Hole Knockout Kit 6 Dies 1/2" to 2" 98KN 10T. VEVOR 15 Ton Hydraulic Knockout Punch Driver Kit Hole Tool 1/2"-4" with 10 Dies. VEVOR 10 Ton Hydraulic Knockout Punch Driver Kit Hole Tool 1/2"-2" with 6 Dies.
TEMCo TH0397 Manual knockout Punch Kit ½” - 1-1/4” Electrical Conduit Hole sizes - Draw Stud threads are compatible with THA001 and THA013 draw studs, allowing for use on TEMCo hydraulic drivers TH0004 and TH0037 or equivalent. Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size.
Greenlee 1731 C-Frame Hydraulic Knockout Punch Driver #1 - Here we have a Greenlee 1731 C-Frame Hydraulic Knockout Punch Driver.With questions call Alex.You will receive exactly what’s pictured: nothing more — nothing less.Please check out our other listings for more Greenlee and Ridgid tools.
TEMCo TH0390 Manual knockout Punch Kit ½” to 2” Electrical Conduit Hole sizes - 3/4", 1", 1-1/4", 1-1/2", 2" die sets compatible with THA001 draw stud allowing for use in TEMCo hydraulic drivers TH0004 and TH0037. Slug splitting design on punches allows for easier slug removal – the smooth operation leaves the round hole with clean edges and a uniform size.
10 Ton Hydraulic Knockout Punch Hole Driver Kit Complete Tool Set with 6 Dies - [Complete Punch Tools]: Hydraulic punch tool kit features 1pc 10-ton pump, 2pcs draw studs, 1pc piston shaft, 2pcs spacers and 6 sets of interchangeable dies & punches fitting for 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2" conduit sizes, can drill different sizes holes on stainless steel, iron, steel, aluminum, plastic, etc; 1/8” (11 gauge) max punching thickness for iron and 1/16” (16 gauge) for stainless steel, perfect to be used for different drilling projects.
NEW TEMCo Double D Punch Die Unit Set 0.769" x 0.642" Knockout Hole w/ Case - TEMCo ID: TH0358. Draw studs and spacers are included for all of the above specifications. "I have always been delighted with the service from TEMCo.". About TEMCo. TEMCo Industrial. Requires Hydraulic Punch Cylinder Thread Size.
Square 45mm x 45mm 1/16 DIN Panel Meter Punch Dies 1.772" x 1.772" - Punch Dies Included (DIN Size): 45mm x 45 mm (1/16 DIN). Type: Squaree DIN Punch Die Set. Draw studs and spacers are included for all of the above specifications. This set requires the use of a hydraulic punch ram with a capacity of at least 12 US Tons.
Rectangle 22.5mm x 45mm 1/32 DIN Panel Meter Punch Dies 0.886" x 1.772" - Punch Dies Included (DIN Size): 22.5mm x 45 mm (1/32 DIN). Type: Rectangle DIN Punch Die Set. Draw studs and spacers are included for all of the above specifications. This set requires the use of a hydraulic punch ram with a capacity of at least 12 US Tons.
9 Ton 6 Dies Hydraulic Knockout Punch Driver Kit Hand Pump Hole Tool Free Case - This 9-ton hydraulic punch driver kit features hydraulic mechanism for powerful drilling holes on different material such as steel and stainless steel. It comes with 6 sets of interchangeable dies & punches of 1/2", 3/4", 1", 1 1/4", 1 1/2", 2" for any installation and repairment on wire pipelines and instruments of metallurgy, petrol, electronics, etc.
Greenlee Hydraulic Knockout Driver Set with Pump, Cat No. 1731, Pump 767A - Greenlee One Shot Hydraulic Knockout Driver with 767A Pump, Cat. Includes 767A Pump, Punch Junction Boxes and Small Enclosures Through 10 Gauge Mild Steel, No Predrilling Required, Throat 8" Deep, No Dies Included, Made in USA.
Alfra Hand Actuated Notching Tool - The ALFRA Notch Pliers punches notched grooves in sheet steel up to 2.0 mm thick, simply and quickly. Alfra 03015 Notching Pliers. Replaceable notched groove punch. Easy punching due to large lever arm.
Currents Tools 90 Deg Hydraulic Punch Driver , Model: 1790 - Model: Model: 1790. MPN: Model: 1790. Joseph Fazzio Inc. Joseph Fazzio, Inc. Surplus Division. Be sure to add us to yourfavorites list ! Your Best Work Starts Here™. Small orders are no problem.
Currents Tools 90 Deg Hydraulic Punch Driver , Model: 1790 - Model: Model: 1790. MPN: Model: 1790. Joseph Fazzio Inc. Joseph Fazzio, Inc. Surplus Division. Be sure to add us to yourfavorites list ! Your Best Work Starts Here™. Small orders are no problem.
Greenlee C- Frame Knockout Punch Driver , 1731 - Model: 1731. Small orders are no problem. Joseph Fazzio, Inc. Surplus Division. Be sure to add us to yourfavorites list ! Your Best Work Starts Here™. Joseph Fazzio Inc.
Greenlee 15 Ton Remote Crimping Tool , RK1550 - Model: RK1550. MPN: RK1550. Small orders are no problem. Joseph Fazzio, Inc. Surplus Division. Be sure to add us to yourfavorites list ! Your Best Work Starts Here™. Joseph Fazzio Inc.
Ricoh 3 Hole 8MM Die 7713946 - (· Zero defects. REC Functional Condition Field. · Hardware required for key functions to be tested may have been removed after testing (e.g. Hard Drive). (e)(3)(A)). C9 = New Open Box. · Part numbers and serial numbers verified accurate.
Spx Hydraulic Stud Driver Px9026097 244-1097 - This item is:_____________SPX HYDRAULIC STUD DRIVER PX9026097 244-1097_______________________________________________________. Most boxes have been opened for inspection and photos. In the event that any clauses or phrases contained here within are ruled out by a judge, the law, a lawyer, jurors, and or any other entity all others remain in effect.
Greenlee 7306 Sb Knockout Set 1/2 X 2', Good Condition, Free Watch, Fast Ship - GREENLEE 7306 SB KNOCKOUT SET 1/2 X 2". THIS GREENLEE KNOCKOUT SET IS REAL IN GOOD CONDITION, L@@KS NEW, IT IS READY TO WORK. GREENLEE 7306SB KNOCKOUT SET 1/2 X 2". • Dies and draw studs for 1/2" through 2" through 4" standard conduit size punches.
NEW TEMCo Double D Punch Die Set 1-3/8" x 1-1/8" Knockout Hole w/ Case - TEMCo ID: TH0359. Draw studs and spacers are included for all of the above specifications. "I have always been delighted with the service from TEMCo.". About TEMCo. TEMCo Industrial. Requires Hydraulic Punch Cylinder Thread Size.
TEMCo THA013 Small English Knock Out Punch Draw Stud 3/8"-24 Thread + nut - TEMCo ID: THA013. THA013 3/8"-24 English Thread. These draw studs are used for our TEMCo TH0004 and TH0037 hydraulic knock out punches, but can also be used for any other knockout punch set. We're constantly improving our products, and our hydraulic knockout punches have gone through a few iterations over the years.
TEMCo THA012 Small Metric Knock Out Punch Draw Stud M10 x 1mm Thread + nut - TEMCo ID: THA012. These draw studs are used for our TEMCo TH0004 and TH0037 hydraulic knock out punches, but can also be used for any other knockout punch set. We're constantly improving our products, and our hydraulic knockout punches have gone through a few iterations over the years.
TEMCo THA011 Short Metric Knock Out Punch Draw Stud M20 x 1.5mm Thread - TEMCo ID: THA011. These draw studs are used for our TEMCo TH0004 and TH0037 hydraulic knock out punches, but can also be used for any other knockout punch set. We're constantly improving our products, and our hydraulic knockout punches have gone through a few iterations over the years.
TEMCo THA001 Long English Knock Out Punch Draw Stud 3/4"-16 Thread - TEMCo ID: THA001. THA001 3/4"-16 English Thread. These draw studs are used for our TEMCo TH0004 and TH0037 hydraulic knock out punches, but can also be used for any other knockout punch set. We're constantly improving our products, and our hydraulic knockout punches have gone through a few iterations over the years.
Alfra CompactFlex Manual Hydraulic Punching Tool Kit - ALFRA Hand Hydraulics Compact Flex Hand Hydraulic Punch Kit w/Draw Bolts, Pre-Drill, Bushings. ALFRA Hand Hydraulic punches can tackle round up to 152 mm, square up to 92 mm, rectangular up to 46 x 86 mm and special shape punch and die with its effortless 750 bar pressure.
Alfra CompactCombi Manual 90 Degree Punching Tool Kit - ALFRA Hand Hydraulics Compact Combi Swivel Head Hand Hydraylic Punch Kit w/Draw Bolts, Pre-Drill, Bushings. ALFRA Hand Hydraulic punches can tackle round up to 152 mm, square up to 92 mm, rectangular up to 46 x 86 mm and special shape punch and die with its effortless 750 bar pressure.
Alfra Compact Manual Straight Punching Tool Kit - ALFRA Hand Hydraulics Compact Hydraulic Punch Kit w/Draw Bolts, Pre-Drill, Bushings. ALFRA Hand Hydraulic punches can tackle round up to 152 mm, square up to 92 mm, rectangular up to 46 x 86 mm and special shape punch and die with its effortless 750 bar pressure.
Alfra 02140 LHP-700 Air Hydraulic Pump [HW] - We accept no substitutes, neither should you. To achieve these goals, we at Precision Zone consistently improve our technological capabilities without losing personal touch. We apologize in advance for this possible inconvenience.
Alfra 02120 AEP-1 Hydraulic Puncher w/Foot Pump [PZ3] - We accept no substitutes, neither should you. We apologize in advance for this possible inconvenience. Free evaluation of repairs (excluding rush orders). To achieve these goals, we at Precision Zone consistently improve our technological capabilities without losing personal touch.
Alfra 02050 Compact Combi Hand Hydraulic Punch Kit [PZ3] - We accept no substitutes, neither should you. We apologize in advance for this possible inconvenience. Free technical support. To achieve these goals, we at Precision Zone consistently improve our technological capabilities without losing personal touch.
Alfra 02005 Compact Hand Hydraulic Punch, tool only [PZ3] - We accept no substitutes, neither should you. We apologize in advance for this possible inconvenience. Free technical support. To achieve these goals, we at Precision Zone consistently improve our technological capabilities without losing personal touch.
Alfra 02055 Compact Combi Swivel Head Punch Driver [PZ3] - We accept no substitutes, neither should you. To achieve these goals, we at Precision Zone consistently improve our technological capabilities without losing personal touch. ABOUT PRECISION ZONE. We apologize in advance for this possible inconvenience.
Hydraulic Knockout Punch Driver Kit 6 Ton 6 Dies Hand Pump Hole Tool 11-gauge - Complete Punch Tools - Hydraulic punch tool kit features 1pc 6-ton pump, 2pcs draw studs, 1 set of spacers and 6 sets of interchangeable dies & punches for conduit fitting size of 1/2", 3/4", 1", 1 1/4", 1 1/2" and 2", can drill different sizes holes on stainless steel, aluminum, steel, plastic, etc; 1/8” (11 gauge) max punching thickness for steel and 1/16” (14 gauge) for stainless steel, perfect to be used for different drilling projects.
Hydraulic Knockout Punch Studs & Free Punch Set 10 Ton 13 Pc New - The punches are heavy dutyand have three cutting edges, made of heat treated carbon steel. They work on mild steel up to 11 gauge and stainless steel up to 16 gauge. Similar to Greenlee, check out the five sizes.
10 Ton 6 Dies Hydraulic Knockout Punch Driver Kit Hand Pump Hole Tool Metal Case - 10-ton Hydraulic Punch Driver Kit features a highly efficient hydraulic mechanism with high accuracy and speed, suitable for punching iron up to 11 gauge thick, or stainless steel up to 16 gauge thick. It is ideal for drilling holes on stainless steel, iron, steel, aluminum, plastic, etc.
Electrical Conduit Pipe Metal Steel Knock Out Knockout Punch Tool Hole Puncher - This knockout punch kit is constructed of forged, machined and heat-treated high carbon steel for durability that can't be beat. Knockout Punch Kit. Put clean holes in steel, aluminum, fiberglass and plastic with this knockout punch kit!
Hydraulic Knockout Punch Studs 3/4-16 Heavy Duty One Pair New - (two studs) One with 3/4"-16 threads by 5" long and one with 3/4"-16 threads on one end and 7/16"-20 threads on the other end by 4 1/8" long. Studs are for use on up to 11 gauge mild steel and up to 16 gauge stainless steel.
10 Ton Hydraulic Punch Driver Kit Manual Hole Knockout Puncher Tool w/ 6 Dies - 10-ton Hydraulic Punch Driver Kit features a highly efficient hydraulic mechanism with high accuracy and speed, suitable for punching iron up to 11 gauge thick, or stainless steel up to 16 gauge thick. It is ideal for drilling holes on stainless steel, iron, steel, aluminum, plastic, etc.
6 Dies 6 Ton Hydraulic Knockout Punch Driver Kit Hand Pump Hole Tool 11-gauge - 6 dies & punches interchangeable to meet different needs. Plastic grip at the end of the long handle. On/off switch for more safety. Portable plastic case for convenient traveling. Cylinder can be rotated 360 degrees. Click for Full Description.
TEMCo 2" HYDRAULIC KNOCKOUT PUNCH Electrical Conduit Hole Cutter Set KO Tool Kit - TEMCo ID: TH0004. Type: Hydraulic Knockout Punch. Punch Dies Included (Conduit Fitting Size): ½", ¾", 1", 1 ¼", 1 ½", 2". "I have always been delighted with the service from TEMCo. About TEMCo. Construction Material: Steel pump and cylinder, hardened tool steel die sets.