100
Vintage Ichizuka Optical Kinotel Anastigmat F:2.9 1-1/2 8mm Movie Camera Lens$20.69 Buy It Now
Heavy-Duty Metri-Pack/56 Series Terminal Release Tool #12094430 (1 per pack)$48.56 Buy It Now
24-10 Ga. Wire Stripper/Cutter Tool (1 per pack)$16.45 Buy It Now
3x set suitable for vacuum cleaners Aqua + multi clean x8 parquet, Aqua + pet & O7V3
$13.32 Buy It Now
2x air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black V9C9
$9.48 Buy It Now
Weller 776E 4 1/4 Diagonal Tapered Relieved Head Cutter Super Full Flush Cut
$167.29 Buy It Now
Car motorcycle hand siphon siphon pumps oil gasoline fuel liquid superF5B3
$4.39 Buy It Now
1Set Manual Wire Cable crimping machine and peeling Machine Stripper Stripping
$188.99 Buy It Now or Best Offer
12mm Inner Diameter Replace Blade Copper Wire Strip Machine Peeling Pliers Tool
$21.59 Buy It Now or Best Offer
Platinum Tools PLT-99587 24mm Fp Xl Combination Wrench
$32.11 Buy It Now
Black Stripping machine Fit Cable Peeler Metal Recycle Bearing steel Ball blade$33.25 Buy It Now or Best Offer
Spare Blade For Wire Stripper High-strength Alloy Stripping Machine Replacement$12.00$11.40 Buy It Now
Automatic Scrap Cable Stripper Electric Wire Stripping Machine Copper Recycling$33.00 Buy It Now or Best Offer
PC Building Rubber Anti Static Mat, Green Grounding Roll ESD Floor Mat For Table$58.00 Buy It Now or Best Offer
engineer Code Pliers Electrician Pliers Bare Terminal / Insulated Terminal / Ope
$110.90 Buy It Now
16 Ton Hydraulic Busbar bend 0-90° Bending Angle Busbar bend Tool 150mm 6Inch US$145.01 Buy It Now
SARGENT Tools 3138 CT Weather Pack Terminals 20-18 AWG and 16-14 AWG Crimp Tool$137.25 Buy It Now
Ratchet Crimp Tool for 20-12 Ga. Ferrules (1 per pack)$293.05 Buy It Now
8-Way Pin Housings, DT Series #DT04-08PA (1 per pack)$11.85 Buy It Now
1 watcherFranklin Sensors ProSensor M150 Professional Stud Finder(9 Sensors & 1.5" Depth)
$30.00 Buy It Now or Best Offer
New for HART 140-Piece 1/4 and 3/8-inch Mechanics Tool Set Chrome Finish
$74.95 Buy It Now
Desktop Anti-Static Soldering Mat Electrostatic Discharge Protection ESD Mat$58.00 Buy It Now or Best Offer
Sibille - MP18-10" & MU18-10" Insulated Screw Starters - Rated for 1000 Volts
$22.00 Buy It Now
Delvo DLV8540-MKE Electric Screwdriver #11243
$498.20 Buy It Now or Best Offer
1 watcherKlein Tools 88906 Conduit Scoring Tool
$25.00 Buy It Now
Intl-37330 Hub Buddy Impact Driven Surface and Stud Cleaner-Black/Silver
$49.99 Buy It Now
6-42V Digital Car Circuit Scanner Diagnostic Truck Finder Short Tool Open Repair
$26.13 Buy It Now
TechBrands Two Internal Collars Metal Pin Vice
$21.74 Buy It Now
2 watchersSchleuniger Ct32 Pneumatic Crimping Tool Tested
$1,100.00 Buy It Now
Lineman'S 4-In-1 Insulated Ratcheting Box Wrench
$70.99 Buy It Now
Intl-37330 Hub Buddy Impact Driven Surface and Stud Cleaner-Black/Silver
$45.59 Buy It Now
Greenlee - 796 Ratchet Cable Bender Assembly, Cable Ratchet
$224.95 Buy It Now
IDEAL VOL-CON XL Voltage/Continuity Tester 61-086 600V Tested
$29.99 Buy It Now
3x set suitable for vacuum cleaners Aqua + multi clean x8 parquet, aqua + pet & H7T9
$12.88 Buy It Now
2x air compressor intake filter sound?Mpfer 1/4 BSP 13 mm thread black P6L6
$9.12 Buy It Now
Fiber Optic Cleaver Return Fiber Cleaver Cutter 0.5° Cut Angle For 0.25mm 0.9mm
$108.19$102.78 Buy It Now or Best Offer
Air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black N3K9
$5.84 Buy It Now
GK5225 Automotive Wire Piercing DC Voltage Circuit 6V / 12V Hook Prob...
$26.91 Buy It Now
Car motorcycle hand siphon siphon pumps oil gasoline fuel liquid suction Z7Z4
$4.50 Buy It Now
Anti-Static High Temperature ESD Soldering Mat Roll Fits Workstation Electronic$58.00 Buy It Now or Best Offer
Portable Powered Electric Wire Stripping Machine Cable Stripper Metal Tool Scrap$33.00$31.35 Buy It Now or Best Offer
20050 Ergonomic Super 4 Plus Automatic Wire Stripper for Wires from 0.2mm-6mm...
$40.28 Buy It Now
Vintage Leather Tool Pouch, Electrician, Lineman MAKE OFFER
$10.99 Buy It Now or Best Offer
6-Way Pin Housings, DTM Series #DTM04-6P (1 per pack)$14.08 Buy It Now
No-Clean Soldering Pen And Solder Braided Tape Set For Electronics Welding Parts
$19.24$17.12 Buy It Now
51Pcs Sandpaper Grinding Head Sandpaper Roll Metal Derusting Polishing Roun O1W2
$7.32 Buy It Now
Air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black T9S7
$6.01 Buy It Now
0-3.2mm Cable Stripper Optical Cable Slitter Wire Stripper Pliers Tool
$6.95 Buy It Now or Best Offer
110V Three-in-one Copper Bus Hydraulic Processing Machine Bronze Bending Machine
$2,180.00$2,005.60 Buy It Now or Best Offer
0.5-0.7MPA Pneumatic End Crimping Machine AM-10 Terminal Crimper Pliers Tool
$188.00 Buy It Now or Best Offer
Rubber Anti Static Mat For PC Phone Electronics Building Repair ESD Soldering$58.00$55.10 Buy It Now or Best Offer
Pneumatic End Crimping Machine AM-10 Terminal Crimper Pliers Tool 0.5-0.7MPA
$188.00 Buy It Now or Best Offer
3-in-1 Electric Hydraulic Bus Processing Machine Cutter/Bender/Hole Puncher
$2,215.00 0 Bids or Best Offer 5d 8h
Manual Wire Cable Stripping Peeling Machine Scrap Stripper USA STOCK New$19.99 0 Bids 5d 7h
Fiber Optic Stripper 45-162 Coaxial Cable Stripper Optical Cable Slitter Tool
$6.99 Buy It Now or Best Offer
0mm to 3.2mm Optical Cable Slitter Wire Stripper Pliers Optic Stripping Plier
$6.89 Buy It Now or Best Offer
AM-10 Pneumatic Terminal Crimping Machine Terminal Crimper Pliers Tool
$187.50 Buy It Now or Best Offer
Pneumatic Terminal Crimping Machine Terminal Crimper Pliers Tool AM-10
$187.80 Buy It Now or Best Offer
Cementex 1000v Insulated 12” Water Pump Pliers P12WP-
$33.00 Buy It Now
Lagmaster Plus Pole Retro Fit Kit (LMP-Retro Kit 7pc Electrical, HVAC, Ceilings
$129.00 Buy It Now
Klein Tools 2100-7 Electrician Scissors w/ Wire Stripping Notches-Lot of 2
$15.00 0 Bids or Best Offer 5d 2h
New BASHLIN CO TRAVELING GROUND - 1590C brand new
$650.00 Buy It Now or Best Offer
Ratchet Crimp Tool for 22-10 Ga. Open Barrel Connectors (1 per pack)$75.40 Buy It Now
NEW Enduro BRT-018 SS Extraction Tool
$46.98 Buy It Now
Tyco Jbs-100-A Power Connection Kit (118343)
$399.99 Buy It Now or Best Offer
Cementex Insulated Ratchet Wrench Set (8)
$159.99 Buy It Now or Best Offer
KLEIN TOOLS VDV427-104 Dura-Blade™ 66/110 Cut Punchdown Blade
$14.84 Buy It Now
Lisle 68280 Professional Wire Stripper Crimper - Compact Multi-Function Pliers$36.99 Buy It Now
2 GB GFI-3501 GFI Function Outlet GFCI Tester Circuit Analyzer 3 View Indicator
$16.95 Buy It Now or Best Offer
1/2" Dr, Ratcheting Breaker Bar 18" 12018 Titan 12018 0
$46.99$43.63 Buy It Now
1" Dr. 475 Ft/Lbs Truck Extension 1600P LTI Tools 1600P 0
$76.99$73.20 Buy It Now
Adjustable Angle 1-Sensor (Metal) 300030 AUTEL 300030 0
$33.99$32.04 Buy It Now
Nut Buddy Junior 67301 AME International 67301 0
$119.99$119.00 Buy It Now
BEAD BAZOOKA (Gen 2) 10L GBB10L2 Gaither Equipment GBB10L2 0
$451.99$432.17 Buy It Now
Klein 88906 Heavy Duty Conduit Scoring Cutting Tool 1/2" - 3/4" - 1" EMT
$39.97$34.77 Buy It Now
AMP 90033 / 22-20 26-24 AWG - Ratchet Hand Crimper / Crimping Tool$37.99 Buy It Now or Best Offer
Descalers limescale remover 50g KAMSTOP
$4.29 Buy It Now
1 watcher Molex HT-60901 Extractor$49.99$47.49 Buy It Now or Best Offer
Network Cable Straightening Machine Network Cable Core Wire Twisting Machine
$479.99 Buy It Now
DWYER A-417A Static Pressure Fittng,1/8"to3/16"Tubing
$15.26 Buy It Now
NVENT CADDY RGC Grid Wire Clamp,Steel
$3.51 Buy It Now
Graphic Controls 82-76-3004-03 Green Marking Products (New)
$15.97$15.17 Buy It Now or Best Offer
Spool Dispenser Coil Wire Untangler Electrical Romex Spinner Reel MC Unroller ME
$84.20 Buy It Now
Greenlee Communications Punch Down Tool Model 46020
$17.97$17.07 Buy It Now or Best Offer
Mt20Dl Battery Adapter For Makita 18V Li-Ion Battery For Dewalt 18V 20V Battery`
$15.88 Buy It Now or Best Offer
16 Ton Hydraulic Busbar“6 inch Blade” 0-90° Busbar Bending Tool$145.00 Buy It Now or Best Offer
Coilmaster Machine T41283
$775.00 Buy It Now or Best Offer
Coilmaster Machine T41282
$900.00 Buy It Now or Best Offer
10Pcs Baby Safety Sower Socket Protection Cover Insulation Hole Round
$8.53 Buy It Now
8mm Round Shank Electric Drill Oil/Water Pump Self Priming with Hose Clamps
$13.49 Buy It Now
Jump Start Electric Engine Drill Bit Adapter For Troy-Bilt Plug Button
$11.94 Buy It Now
Universal 12V Quick Release Battery Terminals Clamp for Car Van and More
$11.02 Buy It Now
Electric Hammer Dust Cover Impact Drill Dust Cover Ash Bowl Dust Collector 2PC
$10.07 Buy It Now
Dietze & Schell DS28WS Cross Winding Machine T149551
$800.00 Buy It Now or Best Offer
Projection Screen Canvas Foldable Home Wrinkle
$22.16 Buy It Now
1 watcherBachi Coil Winding Machine T148364
$349.00 Buy It Now or Best Offer
Blue Light Nano Steam Atomizing Fogger Disinfection Sprayer With Battery
$42.19 Buy It Now or Best Offer
Watt Meter Power Energy Monitor Electricity Usage Socket Equipment Plug
$16.75 Buy It Now or Best Offer
Blue Light Nano Steam Atomizing Fogger Disinfection Sprayer With Battery
$34.44 Buy It Now or Best Offer
Arduely relay module with 6 5V high level relay channels
$11.08 Buy It Now or Best Offer
- Anti-Static ESD Soldering Mat Roll Rubber Grounding Mat Electronics Working Pad - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Hydraulic Busbar Bender 16 Ton 6" Bus Bar Bending Tool for Iron Copper Aluminum - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- Hydraulic Busbar Bender 16 T 6in Blade Busbar Bending Tool 0-90° Bus Bar CB-150D - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- Large ESD Anti-static Mat 118" X 23" High Temperature Anti-static Soldering Mat - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Scrap Cable Stripper Manual Wire Stripping Machine Copper Recycling Tool Kits - Product parameters: Package size: 6.00 x 15.00 x 6.00cm (2.36 * 5.91 * 2.36inch) Gross weight: 1.8kg (3.97lb) Applicable wire range: 1-32mm (10.03-1.26inch) Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc. features: 1. Using multiple turrets, multiple wires can be operated at the same time 2. The screw is fixed firmly and durable, easy to disassemble and assemble, and the whole machine is not easy to be scrapped 3. Not all wires will run automatically. The ones with small resistance and hard wire will do. 4. The frame is not loose and has high strength The shaft and side plate hole have no wear and long service life 5. Bearing capacity of body material: 3.5t Packing list: Stripping machine + blade * 3 + small wrench * 2 + screw accessorie.
- Manual Copper Wire Stripping Machine Cable Peeling Stripper Recycling 1-20mm - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Woods Modular 2 Way Crimper Kit Phone Tools - Woods Modular 2 Way Crimper Kit Phone Tools. Tool is new, package shows wear206
- Good Condition Greenlee Flex Splitter 1940 Flexible Conduit Cutter Free Shipping - Greenlee Flex Splitter 1940 Flexible Conduit Cutter Tool With 1941 Blade USA. Good Pre-owned Condition. Exactly as depicted in the photos.
- Lot Of 5 Punch Down Wire Impact Tool with Blades Ideal Evilon - Lot Of 5 Punch Down Wire Impact Tool with Blades Ideal Evilon. Used Wire Impact Punch Down Tools - Lot of 5: (4) Ideal (1) Evilon - blades as shown - CHeck pic for condition No ship P.O. Boxes lower 48 only
- Dracon Harris Lot Of 4 HD D-814 HD8762 Punch Down Wire Impact Tool - Dracon Harris Lot Of 4 HD D-814 HD8762 Punch Down Wire Impact Tool. Dracon Harris D814 Wire Punch Down Impact Tools - Lot of 4 - Used - (3) HD8762 / D814 tools and (1) D814 - blade as shown - Check pics for condition No ship po boxes lower 48 only
- Automotive Cable Wire Tracker Car Tracer Finder Test Short & Open DC 6~42 Vol... - You can also use it in checking for short circuit and exacting open circuit and so on. Diagnose and judge the break point from Slight Change of the continuous audio signal from receiver. Transmitter and receiver LEDs show open or short circuit conditions.
- GRAINGER APPROVED WD03-36B Replacement Cutter Head - RW Rack I3. Country of Origin.
- New Milwaukee Punchdown Tool w/ Regular & Extended Blades, Integrated LED Light - Punchdown tool with Integrated LED light and Extended Reach Punchdown. Experience the best access & visibility when utilizing the Milwaukee Punchdown Tool. Extended reach punchdown blade. Key Features.
- Lot Of 5 Aircraft Tool Wire Bonding Brush Avionics Mechanic Different Sizes Usa - LOT OF 5 AIRCRAFT TOOL WIRE BONDING BRUSH AVIONICS MECHANIC DIFFERENT SIZES USA. 1/8. 5/32. 3/16. 1/4. 5/16.
- 👀 NEW HUBBELL / AB CHANCE 1-1/4" x 10' EPOXIGLAS DISCONNECT STICK H-3046-14 - NEW HUBBELL / AB CHANCE DISCONNECT STICK. ORDERS PUT IN BEFORE 10 AM WILL GO OUT.
- 👀 NEW HUBBELL / AB CHANCE 1-1/4" x 8' EPOXIGLAS DISCONNECT STICK H-3046-13 - NEW HUBBELL / AB CHANCE DISCONNECT STICK. ORDERS PUT IN BEFORE 10 AM WILL GO OUT.
- Vintage Utica Tools BX100 S.P.A.C. Wire Cutters Crimper Pliers Hand Tool - These pliers are in good used condition as seen in photos.
- NLC lineman/electrical tools
- 2x air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black C4P3 - Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff im Inneren, Kompressorschalldämpfer als Zulassungsöffnung.
- Automotive Cable Wire Tracker Car Tracer Finder Test Short & Open DC 6~42 Vol... - You can also use it in checking for short circuit and exacting open circuit and so on. Diagnose and judge the break point from Slight Change of the continuous audio signal from receiver. Transmitter and receiver LEDs show open or short circuit conditions.
- 2x air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black X2L4 - Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff im Inneren, Kompressorschalldämpfer als Zulassungsöffnung.
- Air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black H4T4 - Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff im Inneren, Kompressorschalldämpfer als Zulassungsöffnung.
- Conduit Scoring Tool for 1/2 in. 3/4 in. and 1 inch EMT Easy Replaceable Wheels - Conduit Scoring Tool for 1/2 in. Replaceable scoring wheels also available for 1/2" & 3/4" EMT (Cat. No. 88907) and 1" EMT (Cat. No. 88908). Conduit Scorer scores 1/2 in., 3/4 in. EMT conduits. Compact, enclosed design for use on job sites.
- Manual Wire Stripping Machine For Scrap Cable Stripper Copper Recycling 1-20mm - Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line.
- Steel Manual Wire Stripping Machine, Scrap Cable Stripper Copper Recycle Tool - This product is a wire stripping machine in portable size, which is pretty suitable for home or industrial use. Features: Applicable to 1-20mm dameter wire. Small and compact, easy to use and carry. Sturdy and practical, free to disassemble, free assembly. Can be operated by one person or two person to improve stripping efficiency and output. Portable size, which is pretty suitable for home or industrial use. Fine quality, safe and convenient to operate. Specifications: Material: steel Color: black Stripping range: 1-20mm / 0.04-0.79in Machine total height: 120mm / 4.7in Machine total width: 160mm / 6.3in Steel cutter length: 100mm / 3.9in Machine weight: 1381g / 3.0lb Steel cutter weight: 19g / 0.7ounce Package size: 170 * 145 * 60mm / 6.7 * 5.7 * 2.4in Package weight: 1479g / 3.3lb.
- Conduit Scoring Tool for 1/2 in. 3/4 in. and 1 inch EMT Easy Replaceable Wheels - Conduit Scoring Tool for 1/2 in. Replaceable scoring wheels also available for 1/2" & 3/4" EMT (Cat. No. 88907) and 1" EMT (Cat. No. 88908). Conduit Scorer scores 1/2 in., 3/4 in. EMT conduits. Compact, enclosed design for use on job sites.
- Conduit Scoring Tool for 1/2 in. 3/4 in. and 1 inch EMT Easy Replaceable Wheels - Conduit Scoring Tool for 1/2 in. Replaceable scoring wheels also available for 1/2" & 3/4" EMT (Cat. No. 88907) and 1" EMT (Cat. No. 88908). Conduit Scorer scores 1/2 in., 3/4 in. EMT conduits. Compact, enclosed design for use on job sites.
- ꙮ Harris Dracon Division HD 8762/D-814 Punch Down Wire Impact Tool w/ Pouch Kit
- STUDREEL.COM Spool Dispenser Coil Wire Untangler Electrical Romex Spinner Reel - Spindle spring adjusts to desirable free spool. Rack-A-Tiers' Combo Foldable Stud Reel has a 100lb capacity and easily unfolds and slides on to any stud wall. Rack-A-Tiers2x4 & 2x6 Combo Foldable Stud Reel, 100lb Capacity Features.
- OK Industries Wire Wrapping Tool BW-928-BF no tips TOOL ONLY - OK Industries Wire Wrapping Tool BW-928-BF no tips TOOL ONLY.
- Engineer PAD-11S Interchangable Die Set for PAD Series Open Barrel Crimping - Allows crimping of over 90 different crimp pin types. See more product detailspad-11s die precision plates (size Small) to fit the Engineer Inc. 'Handy Crimp Tool'. The die widths of the pad-11s are 0.7mm, 1.0mm, 1.3mm, 1.6mm, 1.9mm and 2.2mm.
- Brass Standard Top Post Mount Adapter Accessory Bolt (1 per pack) - Overall length 1.44" with a hex bolt head. Accessory stud is 0.4" long with a 5/16"-18 stud. Female end is 5/16"-18. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- 110-220V Pro Handheld Magnet Wire Stripping Stripper Cutter Machine 10000r/min
- Andrew CommScope GKT-BK67 Blade Replacement Kit, Lot of 3 Blades - • If YOU are a Missionary in a Foreign Field or represent a church group whereas your primary goal is in spreading the Gospel/Good News; then we want to Help YOU. Dave and Kitty. Does not include Alaska, Puerto Rico, Guam, Bahamas, Hawaii and any other USA territories.
- Durable Bearing Steel Clamp Stripping Machine Black For 1-20mm Diameter Wire - Characteristic: Stripping Fixture. 1 X Stripping Machine. Clamp Material: Bearing Steel. Shape: Ball Blade. ● the Blade Is Easy to Operate. Style: Stripped of Used Wire and Cable. ● Sturdy and Durable, Free to Disassemble, Free Assembly.
- Roll 118"x23" ESD Anti Static Heat Resistant Table Mat Tech Repair & Soldering - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- 20-30HP Outboard Motor Cover 600D Waterproof Full Outboard Motor Engine Cover - Specification Color: Black Style: Modern Condition: New Material: 600d Oxford Cloth Vehicle Service Type: Boat Applicable Outboard Motor: 20-30hp Cover Circumference: 1.65m/ 5.41ft Cover Height: 1.37m/ 4.49ft Package Size: 20*20*5cm/ 7.87*7.87*1.97in Net Weight: 0.4kg/ 0.882lbs Gross Weight: 0.45kg/ 0.992lbs Package Included 1* Outboard Motor Cover 1* Storage Bag Notes Please Carefully Check the Size of the Motor Cover Before Purchasing. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3 Cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering.
- Klein Tools Lot Pliers, Hammer, Hacksaw,autoclamping,screwdrivers - The only one used is the autoclamping tool the rest are all new Please note that I do everything in my power to photograph and describe any defects. Please review all pictures with EBAY's zoom feature to further describe condition and to show any other imperfections before purchase. My pictures are my description. You will be receiving exactly as pictured. I'm human and a defected item is never intentionally shipped. Please send me a messages if you have questions please Ask All Questions Before You Commit.... All items comes from a pet free smoke free home.Check Out my Other things I have for sell Thank you for looking! Add me to your favorites to see more deals! Thanks And Have A Great Day
- Cable Stripper Blade Cut Replacement Tool For Electric Copper Wire Stripper - It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. 1x Spare Blade for Wire Stripper. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life.
- Scrap Cable Stripper Manual Wire Stripping Machine Copper Recycling Tool Kits - Product parameters: Package size: 6.00 x 15.00 x 6.00cm (2.36 * 5.91 * 2.36inch) Gross weight: 1.8kg (3.97lb) Applicable wire range: 1-32mm (10.03-1.26inch) Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc. features: 1. Using multiple turrets, multiple wires can be operated at the same time 2. The screw is fixed firmly and durable, easy to disassemble and assemble, and the whole machine is not easy to be scrapped 3. Not all wires will run automatically. The ones with small resistance and hard wire will do. 4. The frame is not loose and has high strength The shaft and side plate hole have no wear and long service life 5. Bearing capacity of body material: 3.5t Packing list: Stripping machine + blade * 3 + small wrench * 2 + screw accessorie.
- PC Building Rubber Anti Static Mat, Green Grounding Roll ESD Floor Mat For Table - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- VINTAGE H KLEIN & SONS HAWKBILL ELECTRICIAN KNIFE, 3 Blades, NO RESERVE! - Weight: 7 oz. You may see a 1" standard, a 6" rule, a 12" ruler, or a quarter, and they are NOT included in what you are buying. If it's lost, it's on.
- Teledyne StripAll Standard Thermal Wire Stripper STRIPALL - Teledyne StripAll Standard Thermal Wire Stripper STRIPALL.
- Ideal 11-112 Diamond point electric marker - Ideal 11-112 Diamond point electric marker.ESTATE SALE FIND. THE PHOTOS LOOK GOOD. THIS ITEM LOOKS GOOD.
- Panasonic Charging Multi tool Dual 14.4V/18V compatible OIS/Starlo [Unused] - Condition:[ UNUSED ].
- Conduct Tite Wire Stripper Crimper - Conduct Tite Wire Stripper Crimper.In very good condition. Mild wear from use. Please look at the pictures carefully for overall condition.A5
- 10250 Insulated Stripping Pliers 10-20 AWG, multi, one size
- Hakko G2-1602 Blades,Metal,Thermal Wire Stripper,Pk2 - Knipex 9K 98 98 26 Us Insulated Tool Set,7 Pc. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
- Klein Tools 56335 Wide Steel Fish Tape, 1/4-Inch x 25-Foot - Klein Tools 56335 Wide Steel Fish Tape, 1/4-Inch x 25-Foot.
- OK Industries G-200 Wire Speed Wrap Tool Blue Nice Sturdy Pull - OK Industries G-200 Wire Speed Wrap Tool Blue Nice Sturdy Pull.
- Manual 20mm Stainless Steel Aluminum-Plastic Lid Crimper Flip Off Caps Hand Seal - Manual Crimper, Hand Sealing Machine Tool. Used for Aluminium-Plastic Lid. Made of stainless steel 304. Production capacity: 20-30 bottle / min (Differs from people to people).
- 4 pcs CADWELD TAC2Q2Q 4/0-4/0 TEE 4/0 AWG Stranded New Lot of 4 Boxes - Specializing in the “unusual” and “bulk deals.”. “BUY IN BULK AND SAVE”.
- Manual Aluminum Wire Stripping Machine Hand Crank Drill Operated Cable Stripper - Wire stripping machine is designed to strip and recycle scrap wire with wire diameter from 1/16" to 1". It can be either manually operated by a detachable handle or easily connected to an electric drill for drill-driven operation.
- AT-A-GLANCE K-Kit Level Indicator Repair Kit - Level Indicator Repair Kit. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Power adapters and other modifications may be necessary for proper operation in other countries.
- Manual Wire Stripping Machine Copper Cable Peeling Stripper w/Drill Connector - Wire stripping machine is designed to strip and recycle scrap wire with wire diameter from 1/16" to 1". It can be either manually operated by a detachable handle or easily connected to an electric drill for drill-driven operation.
- Lot of 3 Bachi 116 Winding Machines T141881 - All 3 machines model 116. Racks, Mounts, & Patch Panels. Product Information. Warranty Information. Reference Number. Poor physical condition. Sold as pictured. For parts or repair- This item is being sold as is, as pictured.
- Rare Electric Pliers KUWAHATA DENKI OSAKA JAPAN - Rare electric Pliers.
- Thermoweld Mold CR-3; 2/0 Stranded to 3/4 Ground Rod M-1595 - You will get exactly what you see in the photos. We will do our best to help resolved any issues you may have.
- 20050 Ergonomic Super 4 Plus Automatic Wire Stripper for Wires from 0.2mm-6mm... - Adjustable length stopper and a plier handle design with lockable grip. This tool is a quality Product made in Germany by. produce since more than 40 years specialist tools for a wide range of applications that allow simple, fast, and precise cable stripping.
- 3 PACK Klein Tools Mid-Flex Glow Rod Set 56415 15-Foot New MADE IN USA - We will take care of you!
- Vtg STRIPMASTER Wire Stripper Tool Model K-1853 Ideal Ind. Inc. Sycamore IL USA - Sycamore IL USA.
- Manual Copper Wire Stripper Stripping Machine The Authentic Wire Stripper 210 - Manual Copper Wire Stripper Stripping Machine The Authentic Wire Stripper 210.
- New Sun Microsystems 530-3623-01 Connector Cable - New Sun Microsystems 530-3623-01 Connector Cable.
- Klein Tools 709 4-Inch Magic-Slot (702) Electrician's Cut-In Blade TPI-10 b216 - Fits Magic-Slot compass saw handle (Klein Cat. Getting hard to find these blades for your magic slot cut-in saw. ).
- Greenlee Slugbuster 7238SB 1/2"-2" Knockout Punch Set - Set is complete. Shows normal wear.
- Ok Industries Hw-Uw-224 Manual Wire Wrap/Unwrap Tool,22-24 Awg - OK INDUSTRIES. Dolphin Components Dc-89-2 Cable Coupler,Bnc/Female,Rg59 Coax,Pk10. Justrite 10375 Bench Can,1 Gal.,Galvanized Steel,Red. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures.
- Lagmaster Plus Plug-Ins Telescopic Pole Add Ons - This Lagmaster Plug-Ins kit appears to be unused and in new condition.
- Paladin Tools Punch Down Impact with Cutter & Un-branded Set Of 2 - Paladin Tools Punch Down Impact with Cutter & Un-branded Set Of 2. Both work great!! Very nice condition.
- Harris Dracon 8762/D-814 Punch Down Wire Impact Tool
- Jonard KR-260 - Like new , Jonard KR-260 tool kit … please email me if you have any questions. I only ship to the United States. No over seas shipping. Thanks
- #az163 Platinum Tools PLT-99653 21mm 22mm Double Flex Ratcheting Spline Wrench
- #az162 Platinum Tools PLT-99654 24mm 25mm Double Flex Ratcheting Spline Wrench
- Burndy PENA134 - PENETROX A13 4 OZ. CONT. (1 EA) - Burndy PENA134 - PENETROX A13 4 OZ. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- " Lot of 6 " New Klein Tools Flashlights Wire Stripper Screwdrivers Dual Tester - Various New Klein Tools. 11045 - Wire Stripper/Cutter. 666 - Square Recess Tip Screwdriver #2 - 8". 32562 - Stubby Multi Bit Screwdriver / Nut Driver.
- VAST V399-5 Trolley,Steel,Overall L 3 1/2in,PK5 - Trolley,Steel,Overall L 3 1/2in,PK5. VAST V399-5. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Order Acceptance.
- MONARCH T-5 Tape,Reflective PK 6 - MONARCH T-5. Tape,Reflective PK 6. 60 in, Width (In.). Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- AT-A-GLANCE K-Kit Repair Kit,For Krueger K Level Gauges PK 6 - Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Power adapters and other modifications may be necessary for proper operation in other countries. Grainger reserves the right to accept or reject any order.
- AT-A-GLANCE H-Kit Repair Kit,For Krueger H Level Gauges PK 6 - Administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Power adapters and other modifications may be necessary for proper operation in other countries. Grainger reserves the right to accept or reject any order.
- SHIMPO CONE Cone Adapter, 1/2 In PK 6 - SHIMPO CONE. Cone Adapter, 1/2 In PK 6. Cone Adapter, For Use With DT-105A, DT-105A-S12, DT-107A, DT-107A-S12, DT-205LR, DT-205LR-S12, DT-207LR, DT-207LR-S12, Length (In.). 1 1/2 in, Width (In.). 1/2 in, Height (In.).
- GRAINGER APPROVED 5DPE0 Tamping (Puddling) Rod PK 6 - GRAINGER APPROVED 5DPE0. Tamping (Puddling) Rod PK 6. Grainger reserves the right to accept or reject any order. Grainger Part #:5DPE0-6. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED 4PB61 Brace,Corner,1 1/2 In PK 10 - GRAINGER APPROVED 4PB61. Grainger reserves the right to accept or reject any order. Grainger Part #:4PB61-10. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED FS-200SS GR 120.00 Strut Channel,Steel,Overall L 10ft - GRAINGER APPROVED FS-200SS GR 120.00. Grainger reserves the right to accept or reject any order. Grainger Part #:4A974. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- 3818100 22 Awg Solid Tinnedcopper Bus Bar Wire 100' - Length of reel: 100 feet. 22 AWG wire gauge. Solid, soft drawn annealed bare copper. The order will be processed and completed by automatic warehouse system within 5 minutes. - If you receive an item and it doesn't work properly or you don't like it because of any reason at all.
- Wire wrap tools OK BJW3, OK WSU30M, Utica RW200 - Fourth is a Utica RW-200 with a 18840 481 bit. Second is an OK Industries WSU-30M Manual wire wrap tool. Third is an OK Industries BJW-3 battery operated wire wrap tool. This is a set of four wire wrap tools.
- 1PC W2D250-ED26-18 400V 460V (EMS or DHL 90days Warranty）#H805X DX - This international order may take longer to arrive. Local pick up is not available.
- 1PC Original W2D250-ED26-18 400V 460V (EMS or DHL 90days Warranty）#H806X DX - This international order may take longer to arrive. Local pick up is not available.
- 1PC W2D250-ED26-06 400V 460V (EMS or DHL 90days Warranty）#H807X DX - This international order may take longer to arrive. Local pick up is not available.
- WINTERS PFP712-DRY-45BF Pressure Gauge,4-1/2" Dial Size,Silver - WINTERS PFP712-DRY-45BF. Pressure Gauge,4-1/2" Dial Size,Silver. Grainger reserves the right to accept or reject any order. Power adapters and other modifications may be necessary for proper operation in other countries.
- Malco Products M12RB Replacement Blades For M12 Sheet Metal Shears - Malco Products M12RB Replacement Blades For M12 Sheet Metal Shears. Can be used for M12 or M14. part numbers 4350-2a and 8530. Please see all pictures before ordering. I can provide more pictures upon request of serious buyer
- 7/8" Cementex BEW-28,1000v insulated,Box End Wrench,high voltage tool,electric
- 13/16" Cementex BEW-26,1000v insulated,Box End Wrench,high voltage tool,electric
- High Leverage Diagonal Cutters, 1000V Insulated (7408250SBA), 10 inches - KNIPEX - 74 08 250 SBA - 10"High Leverage Diagonal Cutters-1000V Insulated. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- 98 01 22 Box Wrenches Insulated 22mm - KNIPEX - 98 01 22 - 9" Offset Box Wrench-1000V Insulated 22 mm. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. Insulation standard: IEC 60900 DIN EN 60913.
- 9 1/2"High Leverage Lineman's Pliers New England Head-1000V Insulated - KNIPEX - 09 08 240 SBA - 9 1/2"High Leverage Lineman's Pliers New England Head-1000V Insulated. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- 98 01 17 Box Wrenches Insulated 17mm - KNIPEX - 98 01 17 - 8" Offset Box Wrench-1000V Insulated 17 mm. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. Insulation standard: IEC 60900 DIN EN 60910.
- 02 08 225 SBA Tools 9" High Leverage Combination Pliers, Insulated (0208225SBA) - KNIPEX - 02 08 225 SBA - 9"High Leverage Combination Pliers-1000V Insulated. Mpn: 02 08 225 SBA. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- 1 new Gardner Bender GET-3213 3-Range Voltage Tester, 120 Volt New in pack
- KD Tools 2173 Three-Way Battery Tool - KD Tools 2173 Three-Way Battery Tool.
- 98 01 19 Box Wrenches Insulated 19mm - KNIPEX - 98 01 19 - 9" Offset Box Wrench-1000V Insulated 19 mm. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. Insulation standard: IEC 60900 DIN EN 60912.
- KNIPEX - 03 01 180 Tools - Combination Pliers (301180) - KNIPEX - 03 01 180 - 7 1/4"Combination Pliers. Precision Grade Performance Tools. Comfortable In Use And Quality Assured Design.
- High Leverage Diagonal Cutters, 1000V Insulated (7408200SBA), 8 inches - KNIPEX - 74 08 200 SBA - 8"High Leverage Diagonal Cutters-1000V Insulated. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Eclipse TZ-204N Tweezer, ESD-Safe, Soft-Grip, Fine Tip Curved - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- ECLIPSE 200-016 UTP Universal Stripping Tool - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- #550 Automotive Flashers (1 per pack) - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Klein Tools 267 Self-Locking Handline Block - Blocks without ropes and hooksMade of light galvanized steel and aluminum alloySheaves have bronze bushingsThis item is NOT an occupational protective device; do NOT use for human supportMade in USA
- Klein Tools 259 Swivel Handline Anchor Hook - Swivel clevis on this forged hook will engage with snap on Klein block and tackle Cat. Nos. 1802-30 and H1802-30Swivel prevents twisting and kinking of ropeMaximum safe load 750-pounds (340 kg)1-3/16-Inch x 1-Inch (3 cm x 2.5 cm) Swivel Opening and 1-7/8-Inch (4.8 cm) Throat OpeningMade in USAThese are NOT occupational protective devices. NOT for human support
- Klein Tools 450-100 Cable Stapler - 1/4", 5/16", 19/32", 31/64" - Cable Stapler 450-100. Klein Tools. Use only with Klein staples. Cable guide and channel to protect cable from accidental piercing and crushing.
- Desoutter 6151652280 Erp5Lt Electric Nutrunner - Item is sold as is where is. PD D70 BB51B.
- GENSPEED W7131689 Data Cable,Cat 6,23 AWG,1000ft,White - GENSPEED W7131689. Data Cable,Cat 6,23 AWG,1000ft,White. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
- GENSPEED W7131761 Data Cable,Cat 6,23 AWG,1000ft,White - GENSPEED W7131761. Data Cable,Cat 6,23 AWG,1000ft,White. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
- Car motorcycle hand siphon siphon pumps oil gasoline fuel liquid suction L1H9 - Kann zum Entfernen von Wasser aus verstopften Waschbecken, Wasserbetten, kaputten Waschmaschinen, Booten und Poolabdeckungen verwendet werden. Übertragen Sie den schnell und sicher aus dem Kerosinbehälter in die Heizung.
- Air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black U3O9 - Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff Inneren, Kompressorschalldämpfer als Zulassungsöffnung.
- Cable Stripper Blade Cut Replacement Tool For Wire Stripping Machine HXSMS-25! - Product description: ★The stripping blade is made of high-quality alloy, with an outer diameter of 49.5 mm, an inner diameter of 28 mm, and a thickness of 15 mm. Compared with ordinary steel blades, it has higher hardness and longer service life. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness. It is processed with advanced precision grinder processing equipment to ensure its accuracy. ★The blade of the cable stripper becomes hard, so it can keep sharp for a long time. It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. ★Enhanced trimming and high temperature quenching can effectively reduce the loss of the blade and extend the service life. The peeling is fast, smooth.
- Auto Repair Diagnostic Tool Detector Electrical Short Open Circuit Cable Finder - Pierce and clamp the cable with the thread, your hands.
- Ulta Lit 9 V. Battery Tester 5001 Ulta Lit 5001 784642050011 - Eliminates the disappointment of misjudging battery life. Tricolor meter indicates the battery's strength: High, medium, and low. Tests: C, D, AAA, AA, 9V, N, and button cell batteries. The tester is compact with an adustable arm for the different battery sizes. For Use With: C, D, AAA, AA, 9V, Button Cells .Voltage: .Includes: .
- Electric Copper Wire Stripper Cable Stripper Blade Cut Replacement Tool Cutters - Features: Material: high-strength alloy Outer diameter: 2.5 inches/65 mm Inner diameter: Front: 1.02 inches / 26 mm Back: 1.3 inches / 33mm Blade thickness: 0.59 inches / 15 mm Applicable models: HXSMS-25 and HXSMS-26 The Package Includes: 1x Spare Blade for Wire Stripper.
- Electronics Working Mat Anti-Static ESD Soldering Mat Roll Rubber Grounding Mat - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Pneumatic Crimping Tool AM-10 Air Powered Wire Terminal Crimping Machine - Specification Name: Pneumatic end crimping machine Model: AM-10 Air pressure range: 0.5-0.7MPA Maximum output: 1.3T Dimensions: 10.63x5.71x4.72inch Net weight:8.77lbs Crimping range: non-insulated terminals≤10mm² Insulated terminal≤6mm² Tube terminal≤35mm².
- Portable Pneumatic Air Powered Wire Terminal Crimping Machine Crimp Tool AM-10 - Specification Name: Pneumatic end crimping machine Model: AM-10 Air pressure range: 0.5-0.7MPA Maximum output: 1.3T Dimensions: 10.63x5.71x4.72inch Net weight:8.77lbs Crimping range: non-insulated terminals≤10mm² Insulated terminal≤6mm² Tube terminal≤35mm².
- New AM-10 Pneumatic Crimper Air Powered Wire Terminal Crimping Machine Tool - Specification Name: Pneumatic end crimping machine Model: AM-10 Air pressure range: 0.5-0.7MPA Maximum output: 1.3T Dimensions: 10.63x5.71x4.72inch Net weight:8.77lbs Crimping range: non-insulated terminals≤10mm² Insulated terminal≤6mm² Tube terminal≤35mm².
- Steel Manual Wire Stripping Machine Scrap Cable Stripper Copper Recycle Tool USA - This product is a wire stripping machine in portable size, which is pretty suitable for home or industrial use. Features: Applicable to 1-20mm dameter wire. Small and compact, easy to use and carry. Sturdy and practical, free to disassemble, free assembly. Can be operated by one person or two person to improve stripping efficiency and output. Portable size, which is pretty suitable for home or industrial use. Fine quality, safe and convenient to operate. Specifications: Material: steel Color: black Stripping range: 1-20mm / 0.04-0.79in Machine total height: 120mm / 4.7in Machine total width: 160mm / 6.3in Steel cutter length: 100mm / 3.9in Machine weight: 1381g / 3.0lb Steel cutter weight: 19g / 0.7ounce Package size: 170 * 145 * 60mm / 6.7 * 5.7 * 2.4in Package weight: 1479g / 3.3lb.
- Portable Wire Stripping Machine Manual Cable Stripper W/ Extra Cutter For 1-20mm - Features: Applicable to 1-20mm dameter wire. Small and compact, easy to use and carry. Sturdy and practical, free to disassemble, free assembly. Can be operated by one person or two person to improve stripping efficiency and output. Portable size, which is pretty suitable for home or industrial use. Fine quality, safe and convenient to operate. Specifications: Material: steel Color: black Stripping range: 1-20mm / 0.04-0.79in Machine total height: 120mm / 4.7in Machine total width: 160mm / 6.3in Steel cutter length: 100mm / 3.9in Machine weight: 1381g / 3.0lb Steel cutter weight: 19g / 0.7ounce Package size: 170 * 145 * 60mm / 6.7 * 5.7 * 2.4in Package weight: 1479g / 3.3lb Package list: 1 * Wire Stripping Machine 1 * extra Cutter.
- Electric Copper Wire Stripper Cable Stripper Blade Cut Replacement Tool Copper - Features: Material: high-strength alloy Outer diameter: 2.5 inches/65 mm Inner diameter: Front: 1.02 inches / 26 mm Back: 1.3 inches / 33mm Blade thickness: 0.59 inches / 15 mm Applicable models: HXSMS-25 and HXSMS-26 The Package Includes: 1x Spare Blade for Wire Stripper.
- Automatic Wire Stripping Machine ROMEX 2 Blades Copper Steel New - Many recyclers of copper wires trust this stripper tool. This wire stripper is your partner for practical and economical wire recycling. Efficient Scrap Wire Stripping: This powerful wire stripping machine can handle kinked and twisted cables and wires.
- Steel Manual Wire Stripping Machine Scrap Cable Stripper Copper Recycle Tool New - This product is a wire stripping machine in portable size, which is pretty suitable for home or industrial use. Features: Applicable to 1-20mm dameter wire. Small and compact, easy to use and carry. Sturdy and practical, free to disassemble, free assembly. Can be operated by one person or two person to improve stripping efficiency and output. Portable size, which is pretty suitable for home or industrial use. Fine quality, safe and convenient to operate. Specifications: Material: steel Color: black Stripping range: 1-20mm / 0.04-0.79in Machine total height: 120mm / 4.7in Machine total width: 160mm / 6.3in Steel cutter length: 100mm / 3.9in Machine weight: 1381g / 3.0lb Steel cutter weight: 19g / 0.7ounce Package size: 170 * 145 * 60mm / 6.7 * 5.7 * 2.4in Package weight: 1479g / 3.3lb.
- AM-10 Terminal Crimper Pliers Tool Pneumatic Terminal Crimping Machine - AM-10 Pneumatic crimping tools for crimping 16mm2 max. Applicable for air pressure from0.4~1Mpa. 1 crimping die ( one machine only standard 1 set crimping die. if you want buy extra crimping dies. ).
- AM-10 Pneumatic Terminal Crimping Machine Terminal Crimper Pliers Tool - AM-10 Pneumatic crimping tools for crimping 16mm2 max. Applicable for air pressure from0.4~1Mpa. 1 crimping die ( one machine only standard 1 set crimping die. if you want buy extra crimping dies. ).
- AM-10 Pneumatic Crimping Machine Pneumatic Air Power Tool Wire Terminal Crimper - Specification Name: Pneumatic end crimping machine Model: AM-10 Air pressure range: 0.5-0.7MPA Maximum output: 1.3T Dimensions: 270X 145X 120MM Net weight:3.98kg Crimping range: non-insulated terminals≤10mm2 Insulated terminal≤6mm2 Tube terminal≤35mm2 AM-10 Pneumatic crimping tools for crimping 16mm2 max. Applicable for air pressure from0.4~1Mpa.
- 4X (car motorcycle hand siphon pumps oil gasoline fuel liquid drink5) - Kann zum Entfernen von Wasser aus verstopften Waschbecken, Wasserbetten, kaputten Waschmaschinen, Booten und Poolabdeckungen verwendet werden. Übertragen Sie den schnell und sicher aus dem Kerosinbehälter in die Heizung.
- Anti-Static ESD Soldering Mat Roll Rubber Grounding Mat Electronics Working Mat - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Steel Manual Wire Stripping Machine Scrap Cable Stripper Copper Recycle Tool USA - This product is a wire stripping machine in portable size, which is pretty suitable for home or industrial use. Features: Applicable to 1-20mm dameter wire. Small and compact, easy to use and carry. Sturdy and practical, free to disassemble, free assembly. Can be operated by one person or two person to improve stripping efficiency and output. Portable size, which is pretty suitable for home or industrial use. Fine quality, safe and convenient to operate. Specifications: Material: steel Color: black Stripping range: 1-20mm / 0.04-0.79in Machine total height: 120mm / 4.7in Machine total width: 160mm / 6.3in Steel cutter length: 100mm / 3.9in Machine weight: 1381g / 3.0lb Steel cutter weight: 19g / 0.7ounce Package size: 170 * 145 * 60mm / 6.7 * 5.7 * 2.4in Package weight: 1479g / 3.3lb.
- Carpenter Manufacturing Model 74-B "Swing Blade" Wire Stripper - Easy way to strip wires for crimping etc.
- High-strength Replacealbe Spare Blade For Electric Copper Wire Stripper USA - It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. 1X spare blade for wire stripper. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness.
- ESD Anti Static Heat Resistant Table Mat 2mm Thickness For Tech Repair Soldering - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- PIC GAUGES 6001-4LCC Compound Gauge,Heavy Duty,6 In., 30/0/30 - Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
- RATCH CUT RC1125-7C Tube Cutter Wheel For RC1125,PK2 - Tube Cutter Wheel For RC1125,PK2. RATCH CUT RC1125-7C. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Grainger Part #:5MK95. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- PIC GAUGES PRO-311D-404CF Compound Gauge,Heavy Duty,4 In.,30/160 - Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
- Greenlee 645-002 Pilot Drill Bit, 0.31" - The drill bit features a split-point tip to help prevent walking, and the cobalt steel construction ensures rugged durability. Designed to fit the Greenlee 645-022 arbor from 2.38 to 3" (6.05 to 7.62 cm).
- KNIPEX 12 12 10 Wire Stripper,13 to 7 AWG,16-7/8 In - KNIPEX 12 12 10. Wire Stripper,13 to 7 AWG,16-7/8 In. Grainger reserves the right to accept or reject any order. Power adapters and other modifications may be necessary for proper operation in other countries.
- Vintage Winchester Electronics 107-1001 Removable Contact Insertion Tool
- Vintage Winchester Electronics 107-1004 Removable Contact Insertion Tool
- Ideal 30-429 9-3/4-Inch length Multi-Crimp Tool - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Vintage Vaco USA 8" Wire Stripper Crimper Cutter Bolt Cutter Model No. 1963 - 8" Wire Stripper Crimper Cutter Bolt Cutter. What is pictured is what you get so if you don't see it in the photos it is not included.
- cementex insulated tools - Cementex insulated Socket set Standard sizes - 3/8 to 13/16 Metric sizes - 5mm to 19mm
- Ideal Crimp Tool #429 (1 per pack) - Cutter on end with knife-to-anvil blades never need to be sharpened. Forged steel construction. Weights 15 oz. Ideal 429 Multi-Crimp Tool. 22-10 Gauge. Non-Insulated, Insulated.
- Economical Crimper/Stripper/Cutter Tool (1 per pack) - A good all-around tool. _x000D_ _x000D_ Crimp:_x000D_ insulated connectors, 26-10 gauge_x000D_ non-insulted connectors, 22-10 gauge_x000D_ _x000D_ Strip 26-8 gauge wire. Comfort grip. Includes a helpful 26-8 gauge wire sizing gauge.
- Cementex 236TSD 2-36 in-lbs Torque Screwdriver 1000V 2013 - Cementex 236TSD 2-36 in-lbs Torque Screwdriver 1000V 2013.
- New VICTOR 6003VA VVF VA CABBLE WIRE STRIPPER Free Shipping
- Fluke Networks JR-SYS-UNI-1 JackRapid Punchdown Systimax Uniprise Mps100E m1bh - Conditions is used preowned in working order.
- STAUBER Best Light Bulb Changer Kit - A press-fit steel pin prevents suction cup rotation; patented support prevents bulb wobbling. - A free Bulb Cleaning Device is included for cleaning dusty old bulbs. - A powerful thumb screw with embedded steel nut prevents stripping and locks pole securely.
- 4x (air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black G4H99) - 4X(Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff Inneren, Kompressorschalldämpfer als Zulassungsöffnung. ).
- CablePrep FOC-100 FOCUS Fiber Optic Connector Insertion & Removal Tool - CablePrep FOC-100 FOCUS Fiber Optic Connector Insertion & Removal Tool. The item is brand new in the original packaging. Has some light handling and long term storage markings on the packaging. Ready to ship!
- Eraser IR-2000 Variable Control Power On - Not fully tested / power on.
- 4X (car motorcycle hand siphon pumps oil gasoline fuel liquid drink6) - Kann zum Entfernen von Wasser aus verstopften Waschbecken, Wasserbetten, kaputten Waschmaschinen, Booten und Poolabdeckungen verwendet werden. Übertragen Sie den schnell und sicher aus dem Kerosinbehälter in die Heizung.
- GRAINGER APPROVED FS-500SS PG 120.00 Strut Channel,Steel,Overall L 10ft - GRAINGER APPROVED FS-500SS PG 120.00. Grainger reserves the right to accept or reject any order. Grainger Part #:5YB80. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- PIC GAUGES PRO-311D-402G Pressure Gauge,Heavy Duty,4 In.,200 psi - Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
- Bussman Cooper BP/FP-2 Fuse Puller - Fits fuses from 1A to 60A. Constructed of blue molded plastic. 3" L x 1/2" W. UL listed. Manufacturer: BUSSMANN COOPER. With our dynamic pricing model, our prices are always competitive. Competitive Pricing.
- 4X (air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black L9V22) - 4X(Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff Inneren, Kompressorschalldämpfer als Zulassungsöffnung. ).
- Bar Air Pressure Gauge 13mm 1/4 BSP Thread Double Scale For Air Compressor_USFY - 1 x Compressor Gauge. Material: Iron Shell. - Easy to read dial. Colour: Black. You can follow below process to chontact us. All pictures are for illustration purpose only and Colours may vary slightly.
- P891 Heavy Duty Tweezers 0.6mm Tip - Hozan P-891 Heavy Duty Tweezers, 0.6mm tip. The order will be processed and completed by automatic warehouse system within 5 minutes. Order Cancellation Policy.
- Test Light 5-Bulb Set Fits Snap-On Otc Kent-Moore 12V - 14V Circuit Testers
- 2x air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black O1D7 - Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff Inneren, Kompressorschalldämpfer als Zulassungsöffnung.
- Bar Air Pressure Gauge 13mm 1/4 BSP Thread Double Scale For Air Compressor_USAY - 1 x Compressor Gauge. Material: Iron Shell. - Easy to read dial. Colour: Black.
- Jonard Industries WSU-2224 (NEW BOX) Wire Wrap Tools - Wire Wrap Tools 22-24AWG WIRE WRAP TOOL.
- 2x air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black L9P1 - Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff Inneren, Kompressorschalldämpfer als Zulassungsöffnung.
- Handheld Enameled wire stripper Motor Repair Tools DF-8 Electric Paint Scraper - Application: Wire stripper. Machine Type: Slip Joint Pliers. Rotating speed: 0-10000r/min. Material: Carbon steel. Model: DF-6. Features: Multifunctional Handle. Modified Item Yes.
- 16 Ton Hydraulic Busbar bend 0-90° Bending Angle Busbar bend Tool 150mm 6" - This Hydraulic Busbar bend Is Made of High-quality Iron, Which Is Strong, Durable, and Not Easy to Deform. 1 Hydraulic Busbar. Quick Connector: the Connector of This Product Is a Threaded Zg3/8" Quick Connector with Very Tight Construction.
- Bar Air Pressure Gauge 13mm 1/4 BSP Thread Double Scale For Air Compressor_.AJ
- Ingasole Land Joint R1120-K1 0.25 inch 12 Volt Iqv Ratchet Kit - [ Country of Manufacture ]. [ Release Date(yyyy/mm/dd) ]. the manufacturer will change contents, date and quantity for sale. Depends on custom in your country also. Without trouble.
- 16 Ton Hydraulic Busbar Bender w/ 6 in Blade Bending Tool 0-90° Bus Bar CB-150D - Hydraulic Busbar Bender 16 Ton w/ 6 in Blade Bending Tool 0-90° Bus Bar CB-150D. Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- 1-20mm Manual Wire Stripper Cable Stripping Machine Stripper Separator Tool US - Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the difference display,pls understand. 2. Pls allow 1-3mm error due to manual measurement,pls understand.
- Hydraulic Busbar Bender 16 Ton 6in Blade 0-90° Bender Bus Bar Bending Tool Equip - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- Bar Air Pressure Gauge 13mm 1/4 BSP Thread Double Scale For Air Compressor_USMJ - 1 x Compressor Gauge. Material: Iron Shell. - Easy to read dial. Colour: Black.
- Car motorcycle hand siphon siphon pumps oil gasoline fuel liquid suction D4X8 - Kann zum Entfernen von Wasser aus verstopften Waschbecken, Wasserbetten, kaputten Waschmaschinen, Booten und Poolabdeckungen verwendet werden. Übertragen Sie den schnell und sicher aus dem Kerosinbehälter in die Heizung.
- Air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black N3B9 - Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff Inneren, Kompressorschalldämpfer als Zulassungsöffnung.
- DF-8 handheld enameled wire Stripping Machine stripper Cutter 110V+Free ship USA - Pro DF-8 handheld Magnet wire Stripping Machine / stripper Cutter 110V. Output Speed. Your satis faction is our ultimate goal.
- Telemaster Crimp Tool, For RJ-11/12/14 & RJ-45 modular plugs, 30-496 - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Jonard ~ JIC-4366 ~ Optical Fiber Cable Sheath Stripper & Ring Tool ~ Blue - Jonard ~ JIC-4366 ~ Optical Fiber Cable Sheath Stripper & Ring Tool ~ Blue. Used without the box
- AMP 59824-1-M *USED* Crimping Tool Crimper Tyco - AMP 59824-1-M *USED* Crimping Tool Crimper Tyco. Part of plastic cover on handle missing but does not affect the performance of tool.
- STAUBER Best Light Bulb Changer Kit
- Samsung DirecTV Receiver SIR-S300W Multi-Satellite - Included Components Product manual.
- Bayco Bulb Extractor
- Nitto Kohki Jet Chisel Ejc-32A 230V Electric Needle Scaler Sclaing Tool - GREAT CONDITION. MINOR WEAR. SEE PICTURES.
- GRAINGER APPROVED V321EG Corner Connector, 90 Degrees,Steel - GRAINGER APPROVED V321EG. Grainger reserves the right to accept or reject any order. Grainger Part #:5YE32. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- WESTWARD GGS_51214 Drawer Slides - WESTWARD GGS_51214. Drawer Slides, Closed Length 16 in, Compatible with Grainger Part Number 31CE51, 31CE53, 31CE55, Compatible with Manufacturer Model No. BTE-270031D-01, BTE-270051S-01, BTE-271041S-03A, Drawer Slide Function Ball Bearing, Drawer Slide Type Ball Bearing, Includes Mounting Hardware No, Load Capacity per Pair 66 lb, Open Length 31 1/2 in, 1 Pair.
- ROPER WHITNEY XX KIT Hole Punch Kit,15,16 ga. Steel - ROPER WHITNEY XX KIT. Hole Punch Kit,15,16 ga. Grainger reserves the right to accept or reject any order. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- 88VF Electrician Fully Automatic Wall Threading Machine Cable Threading Machine - Battery: 88vf 10000mah. Lead wire: wire lead spring lead. Pulling force: 65kg. Line speed: 40m / min.
- 3/4" Dia. Red Heavy Duty Adhesive-Lined Shrink Tubing - (1 ft. piece) - 3/4" ID (before shrink) red heavy duty adhesive-lined shrink tubing. Made of polyolefin. Has 3 to 1 shrink ratio. Polyolefin is the standard-bearer in the shrink tubing market. It heats evenly, doesn't bubble or split, and is self-extinguishing.
- Metri-Pack/Pack-Con Crimping Tool #12070947 (1 per pack) - Made in the USA. 12-10 Gauge.
- VESSEL NO.9902 JIS 3 Piece + - Precision Micro Screwdriver Set Import JAPAN - If you have any questions, please feel free to contact us before purchasing.
- *NEW .. Sibille 26205 Lineman's Insulated Screwdriver's IC18 (Set of 8) - *NEW .. Sibille 26205 Lineman's Insulated Screwdriver's IC18 (Set of 8).
- TRENDnet Professional Punch Down Tool model TC-PDT - 110 66 & KR Krone Blades - TRENDnet Professional Punch Down Tool model TC-PDT - 110 66 & KR Krone Blades. See pics for details on condition.
- Morris Swivel Mount Pencil Type Photocontrols 120V 39060 - Explore Endless Deals Wide Variety of Products & Outstanding Prices! We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty. Clothing, Shoes & Accessories.
- Beam Clamp Malleable Iron 1/4" â500-SC - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty. Specialty Services. Pottery & Glass. Movies & TV. Everything Else. Coins & Paper Money.
- NEW Benner-Nawman UP-B36 Drop Wire Cable Slitter - NEW Benner-Nawman UP-B36 Drop Wire Cable Slitter.
- General Machine Products 72680 D CABLE BLOCK B-190150
- Wiha 10250 Insulated Stripping Pliers 10-20 AWG multi size - Wide long head with ridged gripping surface, shears blade and firm wire stripping stations.
- Deutsch Pick Removal Tool #DT-RT1 (1 per pack) - Deutsch DT-RT1 Pick Removal Tool The DT-RT1 Removal Tool is a compact and durable tool designed specifically for Deutsch DT connectors. It features an ergonomic design that allows for a comfortable grip and precise control during use. The tool's specialized tips fit perfectly into the connector housing, ensuring a secure grip and preventing slippage. With the DT-RT1, you can effortlessly release the retention tabs and remove connectors with ease. This reliable tool is a must-have for automotive technicians, electricians, and hobbyists working with Deutsch DT connectors, making connector removal a breeze.
- Stanley Assembly Technologies E33LA19-60 Angle Nutrunner 3/8" Drive 570 RPM 60Nm
- VEVOR 4 Cable Stripper Blades Cut Replacement Tool for Copper Stripping Machine - Compared with the ordinary steel blade, it has higher hardness and longer service life. 【CUTTING SHARP】 - Hardened cable stripper blade edge, so that can long-lasting sharpness. It is perfectly suitable to cut wires of different materials and remove plastic and rubber insulation layers.
- 2x air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black H8U7 - Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff Inneren, Kompressorschalldämpfer als Zulassungsöffnung.
- Southwire 4.5mm W. x 75 Ft. L. Polymer Fish Tape 59897040 Southwire 59897040 - Polymer fish tape with a flexible metal leader and a large case. Spiral extruded polymer design reduces the amount of effort required to push or pull the fish tape through EMT (electrical metal tube) or PVC (polyvinyl chloride) conduit. Versatile design works great in either filled or empty conduit. for use in up to 2-inch conduit. Includes a 360-degree swiveling flexible metal leader (380 -pound strength) or a non-conductive glow in the dark leader (220-pound strength). Low friction design allows the tape to easily glide through the conduit without binding at turns, joints, or couplings. Does not break when folded. Tape Width: 4.5 mm .Length: 75 Ft.
- 5-5/8 In. Static-dissipative Heavy Duty Shear Cutter | Xcelite Micro Awg By On - The Xcelite 5-5/8 in. The cutter is designed to flush cut wire up to 14 AWG (1.6 mm). Superior blades by-pass for a shear cutting action. Shear cut blades. Blade material: steel. Single handed operation.
- 9 In. Circuit Alert Volt Sensing Linemen's Pliers | Voltage Gardner Bender Oal - Hand tools are a part of every toolbox. Circuit Alert pliers combine common electrician needs with the Gardner Bender over-molded, comfort grip. Hand Tool Type Linesman Pliers. Includes volt detection module.
- Steel Manual Wire Stripping Machine Scrap Cable Stripper Copper Recycle Tool USA - This product is a wire stripping machine in portable size, which is pretty suitable for home or industrial use. Features: Applicable to 1-20mm dameter wire. Small and compact, easy to use and carry. Sturdy and practical, free to disassemble, free assembly. Can be operated by one person or two person to improve stripping efficiency and output. Portable size, which is pretty suitable for home or industrial use. Fine quality, safe and convenient to operate. Specifications: Material: steel Color: black Stripping range: 1-20mm / 0.04-0.79in Machine total height: 120mm / 4.7in Machine total width: 160mm / 6.3in Steel cutter length: 100mm / 3.9in Machine weight: 1381g / 3.0lb Steel cutter weight: 19g / 0.7ounce Package size: 170 * 145 * 60mm / 6.7 * 5.7 * 2.4in Package weight: 1479g / 3.3lb.
- Hydraulic Busbar Bender 16 Tons (6in) BusBar Bending Tool Copper Aluminum Metal - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- Hydraulic Busbar Cutter Bender 0-90° 16 Tons Bending Tool w/ 6 in Straight Blade - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- Hydraulic Busbar Bender 16 Ton With 6" Straight Blade 0-90° Bus Bar Bending Tool - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- 16-Ton Hydraulic Busbar Bender w/ 6 in Straight Blade 0-90° Bus Bar Bending Tool - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- 16-Ton Hydraulic Busbar Bender w/ 6 in Straight Blade Bus Bar Bending Tool 0-90° - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- 16-Ton Hydraulic Busbar Bender w/ 6 in Straight Blade Bus Bar Bending Tool 0-90° - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- Hydraulic Busbar Bender 16 Ton w/ 6 in Straight Blade 0-90° Bus Bar Bending Tool - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- Hydraulic Busbar Bender 16 Ton w/ 6 in Straight Blade Bus Bar Bending Tool 0-90° - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- 16 Ton Hydraulic Busbar Bender 6" Blade 0-90°Bus Bar Bending Tool Bender CB-150D - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- Hydraulic Busbar bending 16 Ton 6" Blade Split Bus Bar Bending Tool 0-90° Bender - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- Hydraulic Busbar Bender w/ 6" Straight Blade 16 Ton 0-90° Bus Bar Bending Tool - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- Hydraulic Busbar Bender 16 Ton 6 inch Bus Bar Bending Tool 0-90° Bender CB-150D - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- Hydraulic Busbar Bender 16 Ton 6" Bus Bar Bending Tool for Copper Aluminum Metal - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- Bar Air Pressure Gauge 13mm 1/4 BSP Thread Double Scale For Air CompressorA F u - Easy to read dial. Colour: Black. 1 x Compressor Gauge. Material: Plastic shell.
- Blue Green Anti-Static ESD Rubber Table Floor Mat 118" x 23" For Workbench US - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Cable Stripper Blade Cut Replacement Tool Fits Wire Stripping Machine HXSMS-25 - It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. 1x Spare Blade for Wire Stripper. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life.
- Makita AS180DZ Dust Blower Air Pump 18V Li-ion Cordless Brushless Tool [Unused] - Model number:AS180DZ. Condition:[ UNUSED ]. We sincerely hope you will find good products! ~Caustions~.
- 0.6*3m Anti Static Floor ESD Table Rubber Roll Grounding Mat For Workshop TOP - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- 1-20mm Manual Copper Wire Stripping Machine Scrap Cable Peel Tool w/Extra Cutter - Features: Applicable to 1-20mm dameter wire. Small and compact, easy to use and carry. Sturdy and practical, free to disassemble, free assembly. Can be operated by one person or two person to improve stripping efficiency and output. Portable size, which is pretty suitable for home or industrial use. Fine quality, safe and convenient to operate. Specifications: Material: steel Color: black Stripping range: 1-20mm / 0.04-0.79in Machine total height: 120mm / 4.7in Machine total width: 160mm / 6.3in Steel cutter length: 100mm / 3.9in Machine weight: 1381g / 3.0lb Steel cutter weight: 19g / 0.7ounce Package size: 170 * 145 * 60mm / 6.7 * 5.7 * 2.4in Package weight: 1479g / 3.3lb Package list: 1 * Wire Stripping Machine 1 * extra Cutter.
- For 1-20mm Portable Manual Wire stripping Machine Scrap Cable Stripper Compact - Features: Applicable to 1-20mm dameter wire. Small and compact, easy to use and carry. Sturdy and practical, free to disassemble, free assembly. Can be operated by one person or two person to improve stripping efficiency and output. Portable size, which is pretty suitable for home or industrial use. Fine quality, safe and convenient to operate. Specifications: Material: steel Color: black Stripping range: 1-20mm / 0.04-0.79in Machine total height: 120mm / 4.7in Machine total width: 160mm / 6.3in Steel cutter length: 100mm / 3.9in Machine weight: 1381g / 3.0lb Steel cutter weight: 19g / 0.7ounce Package size: 170 * 145 * 60mm / 6.7 * 5.7 * 2.4in Package weight: 1479g / 3.3lb Package list: 1 * Wire Stripping Machine 1 * extra Cutter.
- Cable Stripper Blade Cut Replacement Tool Fits Wire Stripping Machine HXSMS-25 - It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. 1x Spare Blade for Wire Stripper. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life.
- Hydraulic Busbar bend 0-90 Bending Busbar bend Tool for Iron Copper USA - Hydraulic Busbar Bender 0-90° for Iron Copper Aluminum Bending 16T Output Force. 1 Hydraulic Busbar bender. This hydraulic bus bar bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- Klein Tools Impact Punchdown Tool VDV427-013 - Klein Tools Impact Punchdown Tool VDV427-013.
- Pneumatic Terminal Crimping Machine AM-10 Terminal Crimper Pliers Tool - Specification Name: Pneumatic end crimping machine Model: AM-10 Air pressure range: 0.5-0.7MPA Maximum output: 1.3T Dimensions: 10.63x5.71x4.72inch Net weight:8.77lbs Crimping range: non-insulated terminals≤10mm² Insulated terminal≤6mm² Tube terminal≤35mm².
- Scrap Cable Stripper Manual Wire Stripping Machine Copper Recycling Tool Kits - Product parameters: Package size: 6.00 x 15.00 x 6.00cm (2.36 * 5.91 * 2.36inch) Gross weight: 1.8kg (3.97lb) Applicable wire range: 1-32mm (10.03-1.26inch) Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc. features: 1. Using multiple turrets, multiple wires can be operated at the same time 2. The screw is fixed firmly and durable, easy to disassemble and assemble, and the whole machine is not easy to be scrapped 3. Not all wires will run automatically. The ones with small resistance and hard wire will do. 4. The frame is not loose and has high strength The shaft and side plate hole have no wear and long service life 5. Bearing capacity of body material: 3.5t Packing list: Stripping machine + blade * 3 + small wrench * 2 + screw accessorie.
- 1.95" 65mm Electric Wire Stripper Spare Blade For Copper /Cable Wire Stripping - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- IDEAL INDUSTRIES 45-164 Coaxial Cable Ringer Stripper 1/4" to 9/16" Diameter NEW - IDEAL INDUSTRIES 45-164 Coaxial Cable Ringer Stripper 1/4" to 9/16" Diameter NEW.
- Used Greenlee Flex Splitter 1940 Flexible Metal Conduit/BX Cutter - Used in very good vintage condition, Greenlee Flex Splitter 1940 Flexible Metal Conduit/BX Cutter. This is a used Greenlee Flex Splitter 1940 Flexible Metal Conduit/BX Cutter - Good condition and works great.
- Amp 90136-1 Sadaht Type C Ratchet Hand Crimp Tool 18-16 Awg - B - This lot is for oneAMP 90136-1 SADAHT Type C Ratchet Hand Crimp Tool 18-16 AWG. This unit will arrive in the condition shown, requires two hands squeezing to release the crimp action. Sold on an "As-Is" basis for parts only.
- Klein Tools 85091 Power Conduit Reamer for 1/2" 3/4" & 1" Conduit - Klein Tools 85091 Power Conduit Reamer for 1/2" 3/4" & 1" Conduit.
- PVC Rubber Coiled Material Linen Sports Floor Electric Slotting Machine
- Fluke Networks 11291000 IS40 Pro-Tool Kit w/D814, D-Snips, Stripper - Fluke Networks 11291000 IS40 Pro-Tool Kit w/D814, D-Snips, Stripper. Condition is new. Please feel free to message me with any questions before buying. No returns. Thank you! Unfortunately for some international/US territories regions, eBay shipping does not work properly. If this is the case for your region, your order will be cancelled and you will be refunded in full. US states should not be affected by this.
- Harris Dracon Division HD 8762 D-814 Punch Down Wire Impact Tool Made in USA - Harris Dracon Division HD 8762 D-814 Punch Down Wire Impact Tool Made in USA.
- (QTY 10) ERICO CADWELD WELDING MATERIAL, F20 200 (one shot) CU-CU CU-STL WELD - (QTY 10) ERICO CADWELD WELDING MATERIAL, F20 200 (one shot) CU-CU CU-STL WELD.
- AMP 90302-1-J Ratcheting Crimper Hand Crimp Tool - Missing 1 Pin Attaching Head - Great used condition but it is missing one of the pins that attach the head to the ratcheting handle.
- Gardner Denver 27669AB8 Wire Wrap Tool - Model: 27669AB8. Gardner Denver Wire Wrap Tool. No warranty.
- Slip And Grip Standard Tire Bags 250/Roll Tire Cover - SLIP AND GRIP STANDARD TIRE BAGS 250/ROLL TIRE COVER.
- Compression Terminal By Burndy Catalog ID: YAZV6C2TC10E2FX (LOT OF 12 PIECES) - 6 Flex G,H,I,K,M,DLO, 6 AWG CU, Two Hole, #10 Stud Size, 3/4 Hole Spacing, Long Barrel, Inspection Window, Internal Chamfer, Tin Plated, UL/CSA, 90°C, Up to 35kV, Blue Color Code, 7 or 374 Die Index.
- Lot of 2 Jonard terminator tool - TT-7V and TT4, 8" and 4" - Jonard tool lot of 2 - TT-7V and TT4. 8" and 4" long.
- Cable Pro/Digicon Linear Compliant Connector Assembler Tool LCCT-1 (21-1)
- Cable Pro/Digicon Linear Compliant Connector Assembler Tool LCCT-1 (21-2) - (Bin 21-2).
- Franklin Sensors M10 Stud Finder (3 Sensors & 1" Max Detection Depth) - Franklin Sensors M10 Stud Finder (3 Sensors & 1" Max Detection Depth).
- Klein 5164 8-Pocket Tool Pouch
- Gardner Bender - Cable Snake - Steel Fish Tape 240’ x 1/8'' - FTS-200GR - GARDNER BENDER FTS-200GR CABLE SNAKE. 24' X 1/8".
- No-Clean Soldering Pen And Solder Braided Tape Set For Electronics Welding Parts
- No Clean Soldering Pen And Solder-Braided Tape Set For-Electronics-Welding
- MONOPRICE 2126 Patch Cord,Cat 5e,Booted,Green,1.0 ft. - MONOPRICE 2126. Patch Cord,Cat 5e,Booted,Green,1.0 ft. Voice and Data Patch Cord. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Raychem Tyco IR-1759-MK3 Heat Gun
- Car motorcycle hand siphon siphon pumps oil gasoline fuel liquid superJ7L5 - Kann zum Entfernen von Wasser aus verstopften Waschbecken, Wasserbetten, kaputten Waschmaschinen, Booten und Poolabdeckungen verwendet werden. Übertragen Sie den schnell und sicher aus dem Kerosinbehälter in die Heizung.
- Car motorcycle hand siphon siphon pumps oil gasoline fuel liquid superV1S8 - Kann zum Entfernen von Wasser aus verstopften Waschbecken, Wasserbetten, kaputten Waschmaschinen, Booten und Poolabdeckungen verwendet werden. Übertragen Sie den schnell und sicher aus dem Kerosinbehälter in die Heizung.
- Heavy Duty Wire Stripper Machine Scrap Cable and Copper Recycle Stripping 220V O - This Wire Cutter is perfect for Copper Recycling and Other Electric Wire Industries. L550 x W520 x H840MMWeight: appr. 70kgWorks great for copper wires, single core wires, multi-core wires, aluminum wires and sheet cable wires.
- Southwire 40150N Advanced Dual Range Voltage Tester 63020740 Southwire 63020740 - Advanced dual range non-contact AC voltage detector with a convenient work light. Features audible and visual indication of AC voltage on two ranges: 12 to 1000V and 100 to 1000V. Bi-color LED (light emitting diode) verifies tester is on and range selected, red LED and beeper indicates voltage is detected. The yellow LED light indicates that the tic tester is in low voltage mode. Features a rugged IP67 waterproof and dust tight housing, along with a built-in forward and rear facing flashlight for user convenience in dim lighting. With electricity safety is paramount so it features CAT IV rating at 1000V and is UL (Underwriter's Laboratories) listed. This unit is not designed for use with tamper resistant (TR) outlets. Built to help electricians have a great indicator of live power.
- Manual Waste Cable Wire Stripping Machine Ball Blade Black Bearing Steel Clamp - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- 1.95in 65mm Wire Stripper Spare Blade For Copper /Cable Wire Stripping USA New - It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. 1X spare blade for wire stripper. Compared with ordinary steel blades, it has higher hardness and longer service life.
- Cable Stripper Blade Replacement Blade Cutter Fit Copper Wire Stripping Machine - Product description: ★The stripping blade is made of high-quality alloy, with an outer diameter of 49.5 mm, an inner diameter of 28 mm, and a thickness of 15 mm. Compared with ordinary steel blades, it has higher hardness and longer service life. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness. It is processed with advanced precision grinder processing equipment to ensure its accuracy. ★The blade of the cable stripper becomes hard, so it can keep sharp for a long time. It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. ★Enhanced trimming and high temperature quenching can effectively reduce the loss of the blade and extend the service life. The peeling is fast, smooth.
- Dust Free Room Anti Dust Working Bench Cleaning Room Phone Repair Workbench TOP! - Description This Clean Workbench Features a Negative Ion Filter That Effectively Filters Harmful Substances Such As Pm2.5. This Clean Workbench Has Two Light Modes, Including Incandescent and Green Fluorescent Dust Light. the Incandescent Light Is Used for Work Lighting, Illuminating Tiny Bubbles and Small Parts to Make Your Job Easier. the Green Fluorescent Dust Light Makes Small Dust Visible. This Clean Workbench Is Suitable for Cell Phone Protective Film Replacement, Cell Phone Precision Parts Repair, Etc. Package Included 1*Clean Workbench 1*Power Cord Specification Material: Aluminum Alloy Voltage: 110v Product Size: 37.5*31*30cm/14.76*12.2*11.8in Package Size: 40*33*31cm/15.74*12.99*12.20in Product Weight: 5kg/11.02lbs Package Weight: 5.9kg/13.00lbs.
- Black Manual Wire Cable Stripping Peeling MachineIron Handle Scrap Metal Recycle - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Alloy Cable Stripper Blade Cut Replacement Tool For Electric Copper Wire Strippe - It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. 1x Spare Blade for Wire Stripper. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life.
- Lot Wire Wrap Tools - OK Industries WSU-30-M , ST 100-30 Cambion Vector - Cambion Vector etc. OK Industries WSU-30-M. Big Lot Wire Wrap Tools as shown. NOT use COD, 3rd party, or bill to account numbers. If you need it faster. WHAT WE FOUND: NA. We generally do. LOCAL PICKUP .
- Anti Static ESD Mat High Temperature Rubber Table Mat 118" x 23" 2mm Thickness - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- TechBrands Pin Extractor Tool (0.3mm) - Take the frustration out of removing Molex connector pins with these time save tools. Simply slide the tool over the connector and push the plunger to effortlessly remove the pin. Both male and female pin extractors available Product Specifications: Packaged Volume : 0.2l Packaged Weight : 0.04kg Packaged Length : 22cm Packaged Width : 4.5cm Packaged Height : 2cm.
- STANDARD TechBrands Cat-5 Punch-down Tool - This versatile little tool will strip wire up to 5-6mm, and doubles as a punch-down tool for 110/88-type terminals, with blade. Made from poly-resin plastic, with steel cutters this lightweight tool could easily fit in the pocket, or tool-kit. Product Specifications: Packaged Volume : 0.11l Packaged Weight : 0.02kg Packaged Length : 14.5cm Packaged Width : 7.6cm Packaged Height : 1cm Type of crimp terminal : 8 Pin RJ Modular (RJ45) Crimp Mechanism : Compression.
- ADJUSTABLE TechBrands Cat-5 Punch-down Tool - This punch-down tool has the same functions as the tool above, but has extra features to achieve the perfect`punch' for different wire sizes. It has a turnable body, adjustable impact pressure, and a storage compartment within the handle for holding a spare blade. Frame made of polyacepal resin with fibre glass orange in colour. Supplied with 88 blade. Specifications: Impact pressure: Low: 10 +/- 2 Kg (standard wire) High: 15 +/- 2 Kg (larger wire) Product Specifications: Length : 152mm Packaged Volume : 0.64l Packaged Weight : 0.15kg Packaged Length : 25cm Packaged Width : 8.6cm Packaged Height : 3cm Type of crimp terminal : 8 Pin RJ Modular (RJ45) Crimp Mechanism : Compression.
- TechBrands Two Internal Collars Metal Pin Vice - A handy addition to any tool case. All metal construction with two internal collars. The head rotates freely making it ideal for drilling delicate PCBs or plastic cases. Product Specifications: Packaged Volume : 0.12l Packaged Weight : 0.05kg Packaged Length : 16cm Packaged Width : 5cm Packaged Height : 1.5cm Tool kit contents : Reversible Collar-1, Supports Drill Bits 0.1mm - 1.0mm (dia) Reverse 1.4mm - 2.6mm (dia)Reversible Collar-2, Supports Drill Bits 1.1mm - 1.9mm (dia) Reverse 2.6mm - 3.2mm (dia).
- Protech Heavy Base Third Hand PCB Holder Tool with 2 Clips - Ideal aid for PCB assembly, soldering work, model making, crafts and any application where a third hand is needed. The two strong alligator clips firmly hold parts in place, and six ball joints on moveable arms lock at any angle for the optimum position while you work. A heavy cast iron base ensures added stability. Product Specifications: Dimension details : Base Length : 52mm Width : 52mm Height : 55mm Weight : 300g Packaged Volume : 0.65l Packaged Weight : 0.34kg Packaged Length : 12.1cm Packaged Width : 7cm Packaged Height : 7.7cm Tool Type : Vice Hand tool composition : Metal Dimensions details : Aligator Clip Length : 60mm Dimension details : Main Boom Arm Length : 120mm.
- TechBrands Plasterboard Saw with Spare Blade 150mm - This 150mm Wallboard Saw is designed specifically to make small cuts in plasterboard, wood, and plastic. It is ideal for the home handyman or professional tradesman who needs to get into small, tight spaces. With its double-sided tempered hardened teeth, the Wallboard Saw makes sharp straight cuts on both pull and push strokes, saving you time and effort. This saw includes a soft grip handle for comfortable long-term use. Product Specifications: Length : 150mm Packaged Volume : 1.22l Packaged Weight : 0.19kg Packaged Length : 34.7cm Packaged Width : 8.6cm Packaged Height : 4.1cm.
- 6P/6C RJ11 RJ12 TechBrands Quick Change Crimp Tool Die - Quick Interchangeable Crimp Tool Die - 6P6C RJ11/12 To suit TH-2000 Product Specifications: Ergonomic handle : true Packaged Volume : 0.16l Packaged Weight : 0.08kg Packaged Length : 10cm Packaged Width : 8.2cm Packaged Height : 2cm Tool Type : Crimper Type of crimp terminal : 6 Pin RJ Modular (RJ11 6P/ RJ12) Crimp Mechanism : Ratchet Standard Wire Size : RG58RG59.
- NON-IN 26-18AWG TechBrands Quick Change Crimp Tool Die - TH-2006 Quick Interchangeable Crimp Tool Die - Non-Insulated Terminals 26-18AWG To suit TH-2000 Product Specifications: Packaged Volume : 0.13l Packaged Weight : 0.07kg Packaged Length : 10cm Packaged Width : 8.5cm Packaged Height : 1.5cm Tool Type : Crimper Type of crimp terminal : Non Insulated Crimp Fittings Crimp Mechanism : Ratchet Gauge Size : 26AWG, 18AWG Standard Wire Size : RG58RG59.
- NON-IN 20-10AWG TechBrands Quick Change Crimp Tool Die - TH-2007 Quick Interchangeable Crimp Tool Die - Non-Insulated Terminals 20-10AWG To suit TH-2000 Product Specifications: Packaged Volume : 0.13l Packaged Weight : 0.07kg Packaged Length : 10cm Packaged Width : 8.5cm Packaged Height : 1.5cm Tool Type : Crimper Type of crimp terminal : Non Insulated Crimp Fittings Crimp Mechanism : Ratchet Gauge Size : 20AWG Standard Wire Size : RG58RG59.
- SMA/FIBRE OPTIC TechBrands Quick Change Crimp Tool Die - TH-2009 Quick Interchangeable Crimp Tool Die - SMA/Fibre Optic 1.07-4.52mm To suit TH-2000 Product Specifications: Packaged Volume : 0.13l Packaged Weight : 0.07kg Packaged Length : 10cm Packaged Width : 8.5cm Packaged Height : 1.5cm Tool Type : Crimper Type of crimp terminal : SMA Crimp Mechanism : Ratchet.
- Salisbury S22TCI75FRN - Insulated Torque Wrench - 3/8" Drive 5- 75 Ft Lbs - Salisbury S22TCI75FRN - Insulated Torque Wrench - 3/8" Drive 5- 75 Ft Lbs. (5nm-105nm). The torque wrench you see in the pictures is what you are getting, please look at all the pictures for the condition, please ask all questions before bidding. Thank you.
- Klein Tools OEM 56009 50' Fiberglass Laser Etched Fish Tape Reel 50' x 3/16" - Works Great. Good, Preowned Condition.
- Vintage Gardner Bender 931,3/4" Thin Wall,1/2" Ridgid, No Vial
- StripMeister Automatic Wire Stripping Machine ROMEX 2 Blades Copper Steel New - This wire stripper is your partner for practical and economical wire recycling. Many recyclers of copper wires trust this stripper tool. Efficient Scrap Wire Stripping: This powerful wire stripping machine can handle kinked and twisted and wires.
- Amp 220009-1 Hand Crimp Tool 50-Ohm Bnc Connector - B - This lot is for oneAMP 220009-1 Hand Crimp tool. A signed credit card authorization form is required for all orders paid with credit card. This unit will arrive in the condition shown. ALWAYS HERE TO HELP.
- Micro-Electronics Micro-Strip Soft-Strip .006 Ms-Rhm-2 Holder - A signed credit card authorization form is required for all orders paid with credit card. ALWAYS HERE TO HELP. We directly accept US issued credit cards. SKU: I553246.
- Erico Cadweld Plus Control Unit Pluscu 12V - ERICO CADWELD PLUS CONTROL UNIT PLUSCU 12V. No cord just unit, works.
- Stripping Machine Bearing Steel Clamp Sturdy & Durable For 1-20mm Diameter Wire - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Cementex Open End Wrench Set of 5- 1000V Electrician Tools
- Bayco Bulb Extractor
- Wire Cable Scrap Blade Stripper Replacealbe Spare Blade High-strength Alloy - It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. 1X spare blade for wire stripper. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness.
- No-Clean Soldering Pen And Solder Braided Tape Set For Electronics Welding Parts
- No-Clean Soldering Pen And Solder Braided Tape Set For Electronics Welding Parts
- Gardner Bender M6000 6" Plastic Carrier - GARDNER BENDER M6000 6" PLASTIC CARRIER. Thank you very much for considering purchasing from my store. I’m a small business and I really appreciate you taking the time to shop my store. If you have any questions or concerns about this item, please message me and I will be glad to help in anyway, I can.
- Anti Dust Working Bench Dust Free Room Cleaning Room Phone Repair Workbench 110V - Description This Clean Workbench Features a Negative Ion Filter That Effectively Filters Harmful Substances Such As Pm2.5. This Clean Workbench Has Two Light Modes, Including Incandescent and Green Fluorescent Dust Light. the Incandescent Light Is Used for Work Lighting, Illuminating Tiny Bubbles and Small Parts to Make Your Job Easier. the Green Fluorescent Dust Light Makes Small Dust Visible. This Clean Workbench Is Suitable for Cell Phone Protective Film Replacement, Cell Phone Precision Parts Repair, Etc. Package Included 1*Clean Workbench 1*Power Cord Specification Material: Aluminum Alloy Voltage: 110v Product Size: 37.5*31*30cm/14.76*12.2*11.8in Package Size: 40*33*31cm/15.74*12.99*12.20in Product Weight: 5kg/11.02lbs Package Weight: 5.9kg/13.00lbs.
- 2.5" 65mm Wire Stripper Spare Blade For Rubber Insulation/CableWire Stripping - Product description: ★The stripping blade is made of high-quality alloy, with an outer diameter of 49.5 mm, an inner diameter of 28 mm, and a thickness of 15 mm. Compared with ordinary steel blades, it has higher hardness and longer service life. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness. It is processed with advanced precision grinder processing equipment to ensure its accuracy. ★The blade of the cable stripper becomes hard, so it can keep sharp for a long time. It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. ★Enhanced trimming and high temperature quenching can effectively reduce the loss of the blade and extend the service life. The peeling is fast, smooth.
- 220V Handheld Electric Wire Scraper Painting Machine Paint Scraper Tool DF-6-II - With 3 special blade make wire scraper easier. 1 x Electric Handheld Wire Scraper Painting Machine. Suit for: Round copper wire/Aluminum wire. Put the wire in the middle hole between the cutting blade.
- 1-20mm Manual Wire Stripping Machine Cable Stripper Tool Scrap Metal Recycle - Characteristic: Stripping fixture. 1 X Stripping machine. Clamp material: Bearing steel. Style: Stripped of used wire and cable. Handle materia: Iron. The cutter head is a fragile accessory. The cutter head can be sharped with a sharpening stone.
- Black Manual Wire Stripping Machine Scrap Cable Peeling Copper Recycle Tool US - Characteristic: Stripping Fixture. 1 X Stripping Machine. Clamp Material: Bearing Steel. Style: Stripped of Used Wire and Cable. Handle Materia: Iron. The Cutter Head Is a Fragile Accessory. The Cutter Head Can Be Sharped with a Sharpening Stone.
- Manual Waste Cable Wire Stripping Machine Scrap Metal Recycle Tool Durable New - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Manual Wire Stripping Cable Machine Scrap Stripper Metal Recycle Tool Black NEW - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Electric Replacealbe Spare Blade High-quality For Electric Wire Stripper - It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. 1x Spare Blade for Wire Stripper. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life.
- 15mm Spare Stripper Blade Fit HXSMS-25 & HXSMS-26 Wire Stripping Machine Durable - Durable 15mm Spare Stripper Blade For HXSMS-25 & HXSMS-26 Wire Stripping Machine. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. 1x Spare Blade for Wire Stripper.
- Manual Wire Stripping Machine Copper Cable Peeling Stripper Bearing Steel Black - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Alloy Cable Stripper Blade Cut Replace Tool For Copper Wire Stripping Machine - It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. 1x Spare Blade for Wire Stripper. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life.
- High-Strength Alloy Cable Stripper Blade Cut Replacement Tool For Wire Stripper - It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. 1x Spare Blade for Wire Stripper. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness.
- High-strength Alloy Electric Replacealbe Spare Blade For Copper Wire Stripper - It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. 1X spare blade for wire stripper. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness.
- High-strength Replacealbe Spare Blade For Electric Copper Wire Stripper - It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. 1X spare blade for wire stripper. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness.
- Black Wire Stripping Machine Scrap Cable Peeling Stripper Copper Recycle Tool US - Characteristic: Stripping Fixture. 1 X Stripping Machine. Clamp Material: Bearing Steel. Style: Stripped of Used Wire and Cable. Handle Materia: Iron. The Cutter Head Is a Fragile Accessory. The Cutter Head Can Be Sharped with a Sharpening Stone.
- KLIEN TOOLS 1656-20 Line Puller - High strength cable puller - 4500 Ib - KLIEN TOOLS 1656-20 Line Puller - High strength cable puller - 4500 Ib.
- Outboard Motor Cover 20-30 HP, Full Outboard Engine Cover, Black 600D Waterproof - Specification Color: Black Style: Modern Condition: New Material: 600D Oxford Cloth Vehicle Service Type: Boat Applicable Outboard Motor: 20-30HP Cover Circumference: 1.65m/ 5.41ft Cover Height: 1.37m/ 4.49ft Package Size: 20*20*5cm/ 7.87*7.87*1.97in Net Weight: 0.4kg/ 0.882lbs Gross Weight: 0.45kg/ 0.992lbs Package Included 1* Outboard Motor Cover 1* Storage Bag.
- Wire Cable Scrap Blade Stripping Machine High-strength Alloy Blade Replace Tools - ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness. Compared with ordinary steel blades, it has higher hardness and longer service life. ★Our round blades are suitable for HXSMS-25 and HXSMS-26 wire stripping machines.
- Industrial Manual Waste Cable and Wire Stripper Stripping Machine Black 1-20mm - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- High-quality Alloy Electric Replacealbe Spare Blade For Copper Wire Stripper - It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. 1X spare blade for wire stripper. Compared with ordinary steel blades, it has higher hardness and longer service life.
- High-strength Alloy Replacealbe Round Spare Blade For Wire Stripper Smooth - It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. 1X spare blade for wire stripper. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness.
- Industrial Manual Waste Cable and Wire Stripper Machine Black Tool 1-20mm New - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Klein Tools 85091 Power Conduit Reamer for 1/2" 3/4" & 1" Conduit - Klein Tools 85091 Power Conduit Reamer for 1/2" 3/4" & 1" Conduit. Please see pictures for condition & details.If you have any questions, feel free to contact us.Electronics & games untested, unless stated. Check our eBay inventory for more products as well! We buy from pallet returns, estate sales, auctions and markets. Thank you
- ESD Anti-Static Hi-Temp Grounding Mat Electrostatic Discharge Protection Mat - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Electric Copper Wire Stripping Machine Cable Stripper Blade Replacement Cutters - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- 3M 2360 - DUAL CONDUCTOR COIL CORD = grey 5' Feet
- Bussmann Cooper 15-Amp Time Delay Cartridge Fuse BP/FRS-R-15 NEW. B1 - Bussmann Cooper 15-Amp Time Delay Cartridge Fuse BP/FRS-R-15 NEW. B1.
- STAUBER Best Light Bulb Changer Kit - A press-fit steel pin prevents suction cup rotation; patented support prevents bulb wobbling. - A free Bulb Cleaning Device is included for cleaning dusty old bulbs. - A powerful thumb screw with embedded steel nut prevents stripping and locks pole securely.
- Franklin Sensors ProSensor M150 Professional Stud Finder(9 Sensors & 1.5" Depth)
- Aimco SPC-A27038 18V 3/8" Drive Cordless Nutrunner Precision Clutch Shut Off - If it doesn't, I won't leave you hanging. ~ We found it so you don't have to.
- GRAINGER APPROVED V310ZEG Outlet Body,Steel,Overall L 3 3/4in - GRAINGER APPROVED V310ZEG. Grainger reserves the right to accept or reject any order. Grainger Part #:5YE46. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Klein Tools 5190 Leather 10 Pocket Tool Pouch Vintage Barely Used - Klein Tools 5190 Leather 10 Pocket Tool Pouch Vintage Barely Used.
- UL Listed Ratchet Crimp Tool for 22-10 Ga. Insulated Connectors (1 per pack) - This UL Listed ratchet crimp tool features a cushion grip handle, quick release, and three crimp zones. Each crimp zone is clearly labeled. Weighs 0.9 lbs. UL Listed Ratchet Crimp Tool for 22-10 Ga.
- GRAINGER APPROVED WWG-DISP-EC144 Crimp Conn Kit,Cu,Vinyl,22 AWG,10 AWG - GRAINGER APPROVED WWG-DISP-EC144. Grainger reserves the right to accept or reject any order. Grainger Part #:3KUN1. Crimp Conn Kit,Cu,Vinyl,22 AWG,10 AWG. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Easiax Replacement Blades - COMMSCOPE Replacement Blade Kit for 470164 (MCPT-1412) and 411530 (MCPT-3812) cutting tools. .
- H.f. Wilson # W4496A Electric Wire Wrap Tool, ( Set Of 3 ) - H.F. WILSON # W4496A ELECTRIC WIRE WRAP TOOL, ( SET OF 3 ).
- Tajima Mukichoppa (cable stripper) DK-MC40 Free Ship w/Tracking# New Japan from - If you have any questions, please feel free to contact us before purchasing.
- CablePrep Cobra 360 Dual Compression Tool New
- Ideal True Rms Meter - Used Ideal True RMS Meter
- H.F. WILSON EnG. SPEED WRAP WIRE TOOL MANUAL SOLDER LESS WO322 - H.F. WILSON EnG. SPEED WRAP WIRE TOOL MANUAL SOLDER LESS WO322.
- Standard Pneumatic Model 6600HD Wire Wrap Tool 120V Nice Condition - Standard Pneumatic Model 6600HD Wire Wrap Tool 120V Nice Condition.
- Standard Pneumatic model 625 Electric UNWRAP Tool 120v USA Double Insulated - Standard Pneumatic model 625 Electric UNWRAP Tool 120v USA Double Insulated.
- Siemon S714 Punch Down Tool A1
- IDEAL E-Z Stripper USA Wire Stripper B1 - IDEAL E-Z Stripper USA Wire Stripper
- TRACEABLE 5045 Timer Plus,Traceable - TRACEABLE 5045. In countdown mode, program in in 1 sec. and then repeats in stopwatch mode. Product Compliance and Suitability. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V300ZY Outlet Body, Z-Shape Connector,Steel - GRAINGER APPROVED V300ZY. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAU8. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Panasonic Charging Multi Tool EZ46A5 Dual Main unit only - ● Active in versatile use with one unit. Style: Body only. ● ON lock switch that the body is easy to hold.
- DOWELL 10-22 AWG WIRE STRIPPING TOOL 2 Piece Wire Stripper Cutter Pliers Tool - New DOWELL 10-22 AWG WIRE STRIPPING TOOL 2 Piece Wire Stripper Cutter Pliers Tool Multi-function Hand Tool For Electrician. Wire Strippers: Stripping 10-22 AWG solid & stranded wires. Serrated Nose & Safety Lock: Strong-gripping serrated nose for easy bending, shaping, looping and pulling wire.
- ONE Manual Wire Cable Stripping Machine Peeling Machine Cable Wire Stripper - 1 Manual Wire Stripper.
- 1pcs Manual Wire Cable Stripping Off Machine Exfoliating Cable Wire Stripper - (Wir werden uns freuen, Ihnen behilflich zu sein. Sonne und Sonne. Ausgeschlossen.). Sehr geehrter Freund, mir ist Ihr Glückwunsch sehr wichtig! wir stehen hinter jedem Produkt, das wir verkaufen.
- ONE YQK-300 Hydraulic Crimping Tools For Cable Connectors 10-300MM2 Crimper - Hydraulic crimping tool is a professional tool for crimping copper and aluminum lugs with different types, a wide range of crimping dies from 4mm2 to 1000mm2 to suit for different size demand. The main crimping shape is hexagonal, special shape design is provided.
- ONE YQK-300 Hydraulic Crimping Tools For Cable Connectors 10-300MM2 Crimper - Hydraulic crimping tool is a professional tool for crimping copper and aluminum lugs with different types, a wide range of crimping dies from 4mm2 to 1000mm2 to suit for different size demand. The main crimping shape is hexagonal, special shape design is provided.
- Manual Copper Wire Stripper Stripping Machine The Authentic Wire Stripper 210 - Manual Copper Wire Stripper Stripping Machine The Authentic Wire Stripper 210. Comes with everything you need Features:Good for wires from 24 AWG to 250 kcm, either solid or strandedIndependently adjustable blade and rollers―smoothly strips wires of ANY shape (Romex, square, parallel, triangle, etc)High speed steel blade is durable and can be resharpened easily with a sharpening stone or a Dremel.Clamp-mount on the corner of your bench quickly or bolt down permanently, no extra hardware neededAll-steel construction lasts a life timeAll adjustments are easy to turn by hand yet self-lockingBall-bearings on all moving partsDimensions: 9" x 12-1/4" x 2" excluding the blade
- GRAINGER APPROVED V355Y Flat Plates,Steel,Overall L 7 1/4in - GRAINGER APPROVED V355Y. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAJ8. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- TRACEABLE 1043 Stopwatch,Traceable,Digital NIST - Appropriate for easy-duty, occasional-use needs. The stopwatch includes a lanyard and battery. Stopwatch,Traceable,Digital NIST. TRACEABLE 1043. Governing Law; Limitations. Diversion contrary to U.S. law is prohibited.
- POWER FIRST 22EZ39 Long-Barrel Spl,TinPltd,Long,Yellow - Long-Barrel Spl,TinPltd,Long,Yellow. POWER FIRST 22EZ39. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
- Automotive Cable Wire Tracker Car Tracer Finder Test Short & Open DC 6~42 Vol... - You can also use it in checking for short circuit and exacting open circuit and so on. Diagnose and judge the break point from Slight Change of the continuous audio signal from receiver. Transmitter and receiver LEDs show open or short circuit conditions.
- Benner Nawman Replacement Slitter Blades for UP-B36, 5-Pack, UP-5047-5
- NEW Benner Nawman UP-B36 Telephone Cable Drop Slitter Tool - The UP-B36 Slitter is a small hand tool used for slitting 1, 2, and 5-pair buried or overhead drop-wire and for sheathing up to 25-pair communication cable. This sturdy slitter is only 4″ long and attaches conveniently onto a utility belt.
- No Clean Soldering Pen And Solder-Braided Tape Set For-Electronics-Welding - High-Quality Material: Our solder wick is made of quality copper wire and precise weaving technology, enhancing tension on the surface to absorb excess solder. The solder remover wick features good thermal conductivity and absorption, reducing the risk of thermal injury to circuit boards.
- Amp Tyco 90274-2-E Type F SAHT Ratchet Hand Crimp Tool 18 22-20 AWG 90274-2 - Amp Tyco 90274-2-E Type F SAHT Ratchet Hand Crimp Tool 18 22-20 AWG 90274-2.
- No-Clean Soldering Pen And Solder Braided Tape Set For Electronics Welding Parts
- Klein Tools 1716-60 Parallel Jaw Grip, 0.7 To 1.3" Hdpe Wire Puller
- 13/32" Dia. Red Heavy Duty Adhesive-Lined Shrink Tubing, (4) 6" pcs, 2 Ft total - 13/32" ID (before shrink) red heavy duty adhesive-lined shrink tubing. Made of polyolefin. Has 3 to 1 shrink ratio. Polyolefin is the standard-bearer in the shrink tubing market. It heats evenly, doesn't bubble or split, and is self-extinguishing.
- IDEAL Electrical 44-104 46-90 Wire Marker Booklet (Lot of 18 Booklets)
- Aimco SPC-A27038 18V 3/8" Drive Cordless Precision Clutch Shut Off Nutrunner - If it doesn't, I won't leave you hanging. ~ We found it so you don't have to.
- HALDER SIMPLEX 3244050 Hammer Handle,Wood,10 13/16 In - HALDER SIMPLEX 3244050. Power adapters and other modifications may be necessary for proper operation in other countries. Grainger reserves the right to accept or reject any order. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- Cementex Wrenches Insulated (4)
- 51Pcs Sandpaper Grinding Head Sandpaper Roll Metal Derusting Polishing Roun Y4M7 - 51 x Sandpaper ring. It can be used for jade carving machine, grinding mill, hanging mill. Type: Abrasive Disc.
- Steel Manual Wire Stripping Machine Scrap Cable Stripper Copper Recycle Tool USA - This product is a wire stripping machine in portable size, which is pretty suitable for home or industrial use. Features: Applicable to 1-20mm dameter wire. Small and compact, easy to use and carry. Sturdy and practical, free to disassemble, free assembly. Can be operated by one person or two person to improve stripping efficiency and output. Portable size, which is pretty suitable for home or industrial use. Fine quality, safe and convenient to operate. Specifications: Material: steel Color: black Stripping range: 1-20mm / 0.04-0.79in Machine total height: 120mm / 4.7in Machine total width: 160mm / 6.3in Steel cutter length: 100mm / 3.9in Machine weight: 1381g / 3.0lb Steel cutter weight: 19g / 0.7ounce Package size: 170 * 145 * 60mm / 6.7 * 5.7 * 2.4in Package weight: 1479g / 3.3lb.
- Manual Wire Cable Stripping Peeling Machine Scrap Stripper for 1-20mm Wire - Can be operated by one person or two person to improve stripping efficiency and output. Stripping range: 1-20mm / 0.04-0.79in. 1 Wire Stripping Machine. Small and compact, easy to use and carry. Machine total height: 120mm / 4.7in.
- Manual Copper Wire Stripping Machine Cable Stripper Scrap Metal Recycle Tool - Manual Wire Cable Stripping Peeling Machine Scrap Stripper for 1-20mm Wire USA. Can be operated by one person or two person to improve stripping efficiency and output. Stripping range: 1-20mm / 0.04-0.79in.
- Portable Manual Wire Stripping Machine Scrap Cable Stripper for Copper Recycling - Manual Wire Cable Stripping Peeling Machine Scrap Stripper for 1-20mm Wire USA. Can be operated by one person or two person to improve stripping efficiency and output. Stripping range: 1-20mm / 0.04-0.79in.
- Steel Manual Wire Stripping Machine Scrap Cable Stripper Copper Recycle Tool US - This product is a wire stripping machine in portable size, which is pretty suitable for home or industrial use. Features: Applicable to 1-20mm dameter wire. Small and compact, easy to use and carry. Sturdy and practical, free to disassemble, free assembly. Can be operated by one person or two person to improve stripping efficiency and output. Portable size, which is pretty suitable for home or industrial use. Fine quality, safe and convenient to operate. Specifications: Material: steel Color: black Stripping range: 1-20mm / 0.04-0.79in Machine total height: 120mm / 4.7in Machine total width: 160mm / 6.3in Steel cutter length: 100mm / 3.9in Machine weight: 1381g / 3.0lb Steel cutter weight: 19g / 0.7ounce Package size: 170 * 145 * 60mm / 6.7 * 5.7 * 2.4in Package weight: 1479g / 3.3lb.
- 3M Tc-24 Integrated Circuit Test Clip 923714-I - Aarr - 3M TC-24 INTEGRATED CIRCUIT TEST CLIP 923714-I - AARR.
- 3M Tc-22 Integrated Circuit Test Clip 923705-I - Aarr - 3M TC-22 INTEGRATED CIRCUIT TEST CLIP 923705-I - AARR.
- Hakko Packing A1319 for Replacement parts for 809 Made in Japan Black color NEW - CONDITION : NEW.
- Cable Stripper Blade Cut Replacement Tool For Wire Stripping Machine HXSMS-25 - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Hydraulic Busbar Bender 16 Tons w/ 6in Straight Blade Bus Bar Bending Tool 0-90° - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- C. K Tools 495001 Automatic Wire Stripper Range 24 to 10 AWG - Features hardened steel blades for a longer life.
- Φ1-20mm Manual Wire Cable Stripping Peeling Machine Copper Wires Stripper Peeler - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Steel Manual Wire Stripping Machine Scrap Cable Stripper Copper Recycle Tool USA - This product is a wire stripping machine in portable size, which is pretty suitable for home or industrial use. Features: Applicable to 1-20mm dameter wire. Small and compact, easy to use and carry. Sturdy and practical, free to disassemble, free assembly. Can be operated by one person or two person to improve stripping efficiency and output. Portable size, which is pretty suitable for home or industrial use. Fine quality, safe and convenient to operate. Specifications: Material: steel Color: black Stripping range: 1-20mm / 0.04-0.79in Machine total height: 120mm / 4.7in Machine total width: 160mm / 6.3in Steel cutter length: 100mm / 3.9in Machine weight: 1381g / 3.0lb Steel cutter weight: 19g / 0.7ounce Package size: 170 * 145 * 60mm / 6.7 * 5.7 * 2.4in Package weight: 1479g / 3.3lb.
- Steel Manual Wire Stripping Machine Scrap Cable Stripper Copper Recycle Tool USA - This product is a wire stripping machine in portable size, which is pretty suitable for home or industrial use. Features: Applicable to 1-20mm dameter wire. Small and compact, easy to use and carry. Sturdy and practical, free to disassemble, free assembly. Can be operated by one person or two person to improve stripping efficiency and output. Portable size, which is pretty suitable for home or industrial use. Fine quality, safe and convenient to operate. Specifications: Material: steel Color: black Stripping range: 1-20mm / 0.04-0.79in Machine total height: 120mm / 4.7in Machine total width: 160mm / 6.3in Steel cutter length: 100mm / 3.9in Machine weight: 1381g / 3.0lb Steel cutter weight: 19g / 0.7ounce Package size: 170 * 145 * 60mm / 6.7 * 5.7 * 2.4in Package weight: 1479g / 3.3lb.
- Fluke Networks DSX-PLA804S DSX-8000 Cat 8/Class Permanent Link Adapter Set - Cat 8/Class Permanent Link Adapter Set. For DSX-8000 Cable Analyzer Series. Local pick up is not available. We do not accept P.O. BOXES. Photos are greatly appreciated! If your item appears defective, a call to the manufacturer may solve your issue.
- GRAINGER APPROVED V120NEO 1-1/8Y Pipe Cushion Clamp,Steel - GRAINGER APPROVED V120NEO 1-1/8Y. Grainger reserves the right to accept or reject any order. Grainger Part #:5YE18. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GENSPEED W2131673E Data Cable,Cat 5e,24 AWG,1000ft,Gray - GENSPEED W2131673E. Data Cable,Cat 5e,24 AWG,1000ft,Gray. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
- BURNDY Q3A344N MechConn,Copper,1/2 in,Hex - BURNDY Q3A344N. It features copper alloy body construction. Power adapters and other modifications may be necessary for proper operation in other countries. Grainger reserves the right to accept or reject any order.
- 3/4" Dia. Black Heavy Duty Adhesive-Lined Shrink Tubing - (1 ft. piece) - 3/4" ID (before shrink) black heavy duty adhesive-lined shrink tubing. Made of polyolefin. Has 3 to 1 shrink ratio. Polyolefin is the standard-bearer in the shrink tubing market. It heats evenly, doesn't bubble or split, and is self-extinguishing.
- Electric Vibrating Screen Powder Filter Vibration Screening Machine 200W 220V - Model: B0-300 - s. Power: 200 w.
- VESSEL Professional VA Wire stripping pliers 3200VA-1 - VESSEL Professional VA Wire stripping pliers 3200VA-1 (JAPAN IMPORT). Applicable wire: VVF (VA wire) / 1.6 mm x 2 core / 1.6 mm x 3 core, EM - EEF (Eco wire) / 2.0 mm x 2 core - 2.0 mm x 3 core. See more product details●Eco wires（EM-EEF）can also be cleanly stripped.
- Atlas Copco ETD M 80 ABL V2, Power Screw Gun, 24V, USED - P/N ETD M 80 ABL V2. Type: Power Screw Gun. Condition: USED.
- Ascend Tools 5/127mm Two In One Electrical Wire Cutter 26AWG/14AWG - Ascend Tools 5/127mm Two In One Electrical Wire Cutter 26AWG/14AWG.
- 6 Standard Pneumatic Wire Wrapper New In Boxes - 6 Standard Pneumatic Wire Wrapper New In Boxes. Six units Brand new in boxes. Old stock.. Will ship FedEx ground fully insured with tracking shipping to the lower 48 states only. No Alaska Hawaii, Puerto Rico, Guam or PO boxes international shipping provided by eBay global.
- Ideal 45-124 T8 stripper - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Plate Mount Indexing Plunger - Non Lock-Out Type Steel .24"x.55" Pin J.W. Winco, - THIS INDEXING PLUNGER IS USED IN APPLICATIONS WHICH REQUIRE SURFACE MOUNTING. THE SERIES HAS BEEN EXPANDED WITH ADDITIONAL PLUNGER PIN LENGTHS TO WIDEN THE APPLICATION OPPORTUNITIES. MAXIMUM HEAT RESISTANCE OF NYLON PLASTIC HAND KNOB IS 230 degreesF.
- Klein Tools 88906 Electric Conduit Scoring Tool - NEW - Klein Tools 88906 Electric Conduit Scoring Tool - NEW.
- Z5004 Official HIOKI Strap with magnet / for LR5001/LR5011/LR5021/LR5031 Other - LR5001, LR5011, LR5021, LR5031, LR5041, LR5042, LR5043, LR5051, LR5061, DT4281, DT4282, DT42 51, DT4252, DT4253, DT4254, DT4255, DT4255, DT4221, DT4222, LR8512, LR8513, LR8514, LR8515. Strap LR5001 with magnet, LR5011, LR5021, LR5031, LR5041, LR5042, LR5043, LR5051, LR5061, DT4281, DT4282, DT4252, DT4253, DT4254, DT4254, DT4254 55, DT4256, DT4221, DT4222, LR8512, LR8513, LR8514, LR8515.
- New Cementex P6CN High Voltage Double Insulated Needle Nose Pliers MADE IN USA - This needle nose plier is perfect for looping, cutting and forming wires. Made of precision high carbon drop forged steel, the tool features cross-hatching on the jaws to grab work tightly and induction hardened cutting edges for long life.
- Southwire SIMpull 4.5mm W. x 125 Ft. L. Flexible Polymer Fish Tape 59896940 - Flexible polymer fish tape with a metal leader. Features a large case which has a spiral extruded polymer design and reduces the amount of effort required to push or pull the fish tape through EMT (electrical metal tube) or PVC (Polyvinyl chloride) conduit. Versatile design works great in either filled or empty conduit. for use in up to 2-inch conduit. Includes a 360-degree swiveling flexible metal leader (380-pound strength) or a non-conductive glow in the dark leader (220-pound strength). Low friction design allows the tape to easily glide through the conduit without binding at turns, joints, or couplings. Does not break when folded. Tape Width: 4.5mm .Length: 125 Ft.
- Astro Tool ATBX5588 Plier - Astro Tool ATBX558 Insertion Extraction PlierSold as is
- Astro Tool ATBX5395 Plier - Astro Tool ATBX5395 Insertion Extraction Plier Sold as is
- ALLOSUN Automotive Cable Wire Tracker Car Tracer Finder Test Short & Open DC 6~4 - You can also use it in checking for short circuit and exacting open circuit and so on. Diagnose and judge the break point from Slight Change of the continuous audio signal from receiver. Transmitter and receiver LEDs show open or short circuit conditions.
- Docs Screw Gun Pole Tool Telescopic 3'-6' DeWalt, Milwaukee, Hilti,Makita SGP-3 - We do not represent or make any claim regarding any manufacturers warranty.
- Cable Tie Fastener Automatic Nylon Cable Tie Tension Gun | Hanlong HT-218 - HANLONG HT-218 AUTOMATIC CABLE TIE FASTENER. Hanlong HT-218 Automatic Cable Tie Fastening Tool, Model; HT-218. Equipped with an adjustable tension wheel with 4 levels bundling pressure for quick setting and reduces operator fatigue.
- Manual Wire Cable Stripping Peeling Machine Scrap Stripper Metal Recycle Tool - Product parameters: Package size: 6.00 x 15.00 x 6.00cm (2.36 * 5.91 * 2.36inch) Gross weight: 1.8kg (3.97lb) Applicable wire range: 1-32mm (10.03-1.26inch) Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc. features: 1. Using multiple turrets, multiple wires can be operated at the same time 2. The screw is fixed firmly and durable, easy to disassemble and assemble, and the whole machine is not easy to be scrapped 3. Not all wires will run automatically. The ones with small resistance and hard wire will do. 4. The frame is not loose and has high strength The shaft and side plate hole have no wear and long service life 5. Bearing capacity of body material: 3.5t Packing list: Stripping machine + blade * 3 + small wrench * 2 + screw accessorie.
- PC Building Rubber Anti Static Mat, Green Grounding Roll ESD Floor Mat For Table - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- HIOKI K thermocouple DT4910 for DT4251/DT4252/DT4253/DT4254/DT4255/DT4256/DT4281
- Scrap Cable Stripper Manual Wire Stripping Machine Copper Recycling Tool Kits❕ - Product parameters: Package size: 6.00 x 15.00 x 6.00cm (2.36 * 5.91 * 2.36inch) Gross weight: 1.8kg (3.97lb) Applicable wire range: 1-32mm (10.03-1.26inch) Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc. features: 1. Using multiple turrets, multiple wires can be operated at the same time 2. The screw is fixed firmly and durable, easy to disassemble and assemble, and the whole machine is not easy to be scrapped 3. Not all wires will run automatically. The ones with small resistance and hard wire will do. 4. The frame is not loose and has high strength The shaft and side plate hole have no wear and long service life 5. Bearing capacity of body material: 3.5t Packing list: Stripping machine + blade * 3 + small wrench * 2 + screw accessorie.
- Hydraulic Busbar Bender 0-90° 16 Tons 6-inch Iron,Copper,Aluminum Metal Bender - Quick Connector: The connector of this product is a threaded ZG3/8" quick connector with very tight construction. It can be connected tightly and quickly with the connector on the hydraulic pump. Gross Weight: 18kg/39.68lbs.
- Hydraulic Busbar Bender 0-90° 16 Tons 6-inch Iron,Copper,Aluminum Metal Bender - Quick Connector: The connector of this product is a threaded ZG3/8" quick connector with very tight construction. It can be connected tightly and quickly with the connector on the hydraulic pump. Gross Weight: 18kg/39.68lbs.
- Hydraulic Busbar Bender 16 Tons w/ 6in Straight Blade Bus Bar Bending Tool 0-90° - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- Cementex Insulated 1000V 4" Round Shank 1/4" Flat Tip - Usa - CEMENTEX INSULATED 1000V 4" ROUND SHANK 1/4" FLAT TIP - USA.
- Deutsch 114008 Removal Tool 4 Pieces - Deutsch 114008 Removal Tool 4 Pieces. New green 10-08 ga, open box.
- Cable Pro/Digicon Linear Compliant Connector Assembler Tool (LCCT-1-S)
- 118" x 23" ESD Anti Static Heat Resistant Table Mat Tech Repair & Soldering Mat - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Waterproof 20-30HP Outboard Motor Cover Outboard Engine Cover 600D Oxford Cloth - Specification Color: Black Style: Modern Condition: New Material: 600D Oxford Cloth Vehicle Service Type: Boat Applicable Outboard Motor: 20-30HP Cover Circumference: 1.65m/ 5.41ft Cover Height: 1.37m/ 4.49ft Package Size: 20*20*5cm/ 7.87*7.87*1.97in Net Weight: 0.4kg/ 0.882lbs Gross Weight: 0.45kg/ 0.992lbs Package Included 1* Outboard Motor Cover 1* Storage Bag.
- Scrap Cable Stripper Manual Wire Stripping Machine Copper Recycling Tool Kits - Product parameters: Package size: 6.00 x 15.00 x 6.00cm (2.36 * 5.91 * 2.36inch) Gross weight: 1.8kg (3.97lb) Applicable wire range: 1-32mm (10.03-1.26inch) Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc. features: 1. Using multiple turrets, multiple wires can be operated at the same time 2. The screw is fixed firmly and durable, easy to disassemble and assemble, and the whole machine is not easy to be scrapped 3. Not all wires will run automatically. The ones with small resistance and hard wire will do. 4. The frame is not loose and has high strength The shaft and side plate hole have no wear and long service life 5. Bearing capacity of body material: 3.5t Packing list: Stripping machine + blade * 3 + small wrench * 2 + screw accessorie.
- Hydraulic Busbar Bender 16 Tons w/ 6in Straight Blade Bus Bar Bending Tool 0-90° - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- Applicable Replacement Cutter Blade For Electric Copper Wire Stripping Machine - Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Round Blades Are Suitable for Hxsms-25 and Hxsms-26 Wire Stripping Machines. with Built-in Bearings, There Is No Need to Replace Blade Bearings When Replacing Parts.
- Durable Manual Wire Stripping Machine Metal Recycle Cable Stripper Tool Black - Characteristic: Stripping Fixture. 1 X Stripping Machine. Clamp Material: Bearing Steel. Style: Stripped of Used Wire and Cable. Handle Materia: Iron. The Cutter Head Is a Fragile Accessory. ● Sturdy and Durable, Free to Disassemble, Free Assembly.
- 0.6*3m Anti Static Floor ESD Table Rubber Roll Grounding Mat For Workshop US - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Cable Winding Machine T81642 - Semiconductor & PCB Equip. Tool & Machine Components. Reference Number. This item powers on but we are unable to confirm functionality. This item is being sold as is, as pictured. Warranty Information.
- 1/2" Dia. Black Heavy Duty Adhesive-Lined Shrink Tubing, (4) 6" pcs, 2 Ft total - 1/2" ID (before shrink) black heavy duty adhesive-lined shrink tubing. Made of polyolefin. Has 3 to 1 shrink ratio. Polyolefin is the standard-bearer in the shrink tubing market. It heats evenly, doesn't bubble or split, and is self-extinguishing.
- OK Industries G-100 Wire Speed Wrap Tool Blue WORKS GREAT
- Flat Angle Cleaning Machine Woodworking Electric Tools Door And Window Tools - Weight: 2.8 kg. Input power: 500W.
- Klein Tools screwdriver mixed lot 22 pieces includes 627-20 tap driver and awls - Mixed lot of 22 pieces Klein screwdrivers, tap driver, and scratch awls! 650 scratch awl. 627 - 20 tap driver with 8-32/6-32 and 10-24/12-24 tap sides. 602 - 4 - 5/16". 601 - 4 - 3/16". 605 - 4 - 1/4".
- Thermocube Non-Polarized 2 Outlet Converter Surge White - The Thermo Cube is a unique, patented electrical device that plugs into a standard 15 amp electrical outlet and turns power on automatically according to ambient air temperature, saving money by using power only when temperatures require heating or cooling. There are five models available with different temperature ranges to choose from. Each unit has two receptacles for use with more than one electrical device. Cold weather model TC-1 turns on at approximately 0°F, and turns off as temperature rises above 10°F. It is ideal for automotive applications, including engine and battery heaters. One year limited warranty.
- Klein Tools 11095 Wire Stripper and Cutter - Klein-Kurve Wire Stripper and Cutter, for 8-18 AWG Solid and 10-20 AWG Stranded Wire. Wire Stripper with six precision ground stripping holes for 8-18 AWG Solid and 10-20 AWG Stranded wire. This Wire Stripper/Cutter features six stripping holes and a shear-cutting knife to handle 8-18 AWG Solid and 10-20 AWG Stranded wire, plus shearing holes for 6-32 and 8-32 bolts.
- Ideal 22-10 Ga. Wire Stripper/Cutter Tool (1 per pack) - Strip and cut solid or stranded 20-10 gauge wire. Tool is made of black oxide steel for added corrosion resistance. The tool has plier nose ends for extra griping strength and built-in wire cutters.
- Ide35-926 Conduit Wiring Kit - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Ideal 45-121 T6 Stripper & Ideal 45-120 T5 T-Stripper Wire Stripper - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- MONOPRICE 9862 Patch Cord,Cat 6,Flexboot,Orange,25 ft. - Patch Cord,Cat 6,Flexboot,Orange,25 ft. MONOPRICE 9862. Voice and Data Patch Cord. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Ok Industries - G100/R3278 Speed Wrap Tool - Industrial Strength Wire Tool
- Brand New handheld Magnet wire Stripping Machine 220V/110V USG T - Weight 0.5KG.
- No-Clean Soldering Pen And Solder Braided Tape Set For Electronics Welding Parts - High-Quality Material: Our solder wick is made of quality copper wire and precise weaving technology, enhancing tension on the surface to absorb excess solder. The solder remover wick features good thermal conductivity and absorption, reducing the risk of thermal injury to circuit boards.
- AME Intl- Hub Buddy Impact Driven Surface and Stud Cleaner-Black/Silver - Strong steel construction with low pickup height. Model Hub Buddy. corrosion and other build-up from wheel stud. Designed to be used with 1/2" impact wrench. Material Alloy Steel. We do not accept P.O. Boxes.
- Lemo Dce.91.075.Bvc Crimper B-Series Male Positioner ~ Fgg.5B.557.Zzc - LEMO DCE.91.072. BVC CRIMPER B-SERIES MALE POSITIONER 2B & 2K FOR M22520/7-01. LEMO DCE.91.075. This lot is for oneLEMO DCE.91.075. BVC Crimper B-Series Male Positioner. ALWAYS HERE TO HELP. A signed credit card authorization form is required for all orders paid with credit card.
- Sibille MS76-S 1000V Insulated Ratcheting Electrical Cable Cutter - Military surplus tool. Shows wear from use, and is in good operating condition. Thank you for looking.
- System Of Remote Control Fm Fobloq 2 Channels, 433MHz, Reach 196 11/12ft RF - FOBLOQ FM REMOTE CONTROL SYSTEM 2 CHANNEL, 433MHz, 60m RF RANGE dsbl-fobloqf-2.
- Spool Dispenser Coil Wire Untangler Electrical Romex Spinner Reel MC Unroller ME - Smoothly dispenses coils of armored cable or NM-B cable. Includes 2 brackets to mount to floor or stud. Convenient carry handle now included. WIRESMART CABLE DISPENSER. Madison Electric is now part of the Southwire family.
- Tajima Mukichoppa (cable stripper) DK-MC40 Free Ship w/Tracking# New from Japan - Application: C. and CVT cable coating.
- Durable Manual Wire Stripping Machine Scrap Cable Peeling Stripper Recycle Tool - Characteristic: Stripping Fixture. 1 X Stripping Machine. Clamp Material: Bearing Steel. Style: Stripped of Used Wire and Cable. Handle Materia: Iron. ● Sturdy and Durable, Free to Disassemble, Free Assembly.
- 4" Electric Circular Saw Trimmer Machine Guide Positioning Cutting Board Tool - Description: Type: Cutting bracket Cutting range: 2-60cm, it suit for 4inch (10cm) saws Cutting objects: wood, plasterboard, ceramic tiles, etc. Feature: ☆ Stainless steel material, light, accurate, durable and efficient ☆ Quick operation, easy to use: flexible adjustment, convenient operation, improve work efficiency ☆ Bilateral scale, precise measurement: Bilateral high-precision scale, accurate to every millimeter ☆ Quick positioning, free adjustment: Hexagonal rotation positioning, the width of the cutting board can be adjusted freely from 2-60cm ☆ Adjustable angle and depth: bevel angle up to 45°, cutting depth up to 30mm Detail: ①Handle design: long-term work is not tired, easy to carry. ②Quick positioning: Quick positioning of the handle, fixed and stable, accurate blanking, n.
- Manual Wire Stripping Machine Scrap Peeling Stripper Electrical Recycle Tool NEW - Stripping machine + blade 3 + small wrench 2 + screw accessories. Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc. The shaft and side plate hole have no wear and long service life.
- Scrap Cable Stripper Manual Wire Stripping Machine Copper Recycling Tool Kits - Product parameters: Package size: 6.00 x 15.00 x 6.00cm (2.36 * 5.91 * 2.36inch) Gross weight: 1.8kg (3.97lb) Applicable wire range: 1-32mm (10.03-1.26inch) Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc. features: 1. Using multiple turrets, multiple wires can be operated at the same time 2. The screw is fixed firmly and durable, easy to disassemble and assemble, and the whole machine is not easy to be scrapped 3. Not all wires will run automatically. The ones with small resistance and hard wire will do. 4. The frame is not loose and has high strength The shaft and side plate hole have no wear and long service life 5. Bearing capacity of body material: 3.5t Packing list: Stripping machine + blade * 3 + small wrench * 2 + screw accessorie.
- Manual Stripping Machine Metal Recycle Tool Ball blade Stripping Fixture Black - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Manual Wire Stripping Machine Scrap Cable Stripper Copper Recycle Tool 1-20mm US - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- High-quality High-strength Alloy Electrica Spare Blade For Wire Stripper Smooth - It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. 1X spare blade for wire stripper. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness.
- Round Blade Smooth High-strength For HXSMS-25 & HXSMS-26 Wire Stripping Machines - ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness. Compared with ordinary steel blades, it has higher hardness and longer service life. ★Our round blades are suitable for HXSMS-25 and HXSMS-26 wire stripping machines.
- Manual Wire Stripping Machine Handheld Scrap Cable Peeling Stripper 1-32mm USA - Manual Wire Stripping Machine 1-32mm Wire Stripper Tool with Hand Crank Wire USA. Stripping machine + blade 3 + small wrench 2 + screw accessories. Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc.
- High-quality Alloy Spare Round Blade For Wire Stripper High Hardness Durable New - It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. 1X spare blade for wire stripper. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness.
- Manual Wire Stripping Cable Machine Scrap Stripper Bearing steel For 1-20mm - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Black Manual Copper Wire Stripping Machine Cable Stripper Scrap Metal Recycle US - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- OK MACHINE & TOOL CORP Speed Wrap Bit KB 224 22-24 AWG - OK MACHINE & TOOL CORP Speed Wrap Bit KB 224 22-24 AWG. In Like New Condition. FAST SHIPPING! Thanks for your interest. Please check out my other items. I combine shipping! 1122-0500
- HIOKI Extension Cable L4931 - HIOKI Hioki Electric Extension cable L4931. 1.5m with connecting connector mountable at the end of extension cable L4930. III 1000V,CAT IV 600V cable. Most products are Japanese products and the manuals are in Japanese.
- New Panasonic EZ46A5X-B brushless multi-tool body only black free shipping
- Black Ball blade Wire Stripping Machine Cable Stripper Scrap Metal Recycle Tool - Characteristic: Stripping Fixture. 1 X Stripping Machine. The Cutter Head Is a Fragile Accessory. The Cutter Head Can Be Sharped with a Sharpening Stone. Clamp Material: Bearing Steel. Shape: Ball Blade.
- Stripping Machine Bearing Steel Manual Scrap Wire Cable Strippers Stripping Peel - The Cutter Head Is a Fragile Accessory. It Can Also Be Purchased Separately. the Price Is $10 for Free Shipping. The Cutter Head Can Be Sharped with a Sharpening Stone. Remember Not to Be Too Hard. Specification: Clamp Material: Bearing Steel Handle Materia: Iron Clamp Material: Bearing Steel Style: Stripped of Used Wire and Cable Color: Black Characteristic: Stripping Fixture Shape: Ball Blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping Diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm Diameter Wire, Greatly Enhance the Scissors with More than 3-5 Times the Line Feature: ● Sturdy and Durable, Free to Disassemble, Free Assembly. ● the Blade Is Easy to Operate. Package Included: 1 X Stripping Machine ☞Notice: 1.the Color May Have Different As the.
- Handheld Magnet Wire Stripping Machine / Stripper Cutter 110V fast shipping New - Pro DF-8 handheld Magnet wire Stripping Machine / stripper Cutter 110V. Output Speed. Your satis faction is our ultimate goal. 0.3 ~ 2.5mm.
- 2mm Green Anti-Static Grounding Mat ESD Table Rubber Matting Roll 0.02G/cm² - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Scrap Cable Stripper Manual Wire Stripping Machine Copper Recycling Tool Kits - Product parameters: Package size: 6.00 x 15.00 x 6.00cm (2.36 * 5.91 * 2.36inch) Gross weight: 1.8kg (3.97lb) Applicable wire range: 1-32mm (10.03-1.26inch) Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc. features: 1. Using multiple turrets, multiple wires can be operated at the same time 2. The screw is fixed firmly and durable, easy to disassemble and assemble, and the whole machine is not easy to be scrapped 3. Not all wires will run automatically. The ones with small resistance and hard wire will do. 4. The frame is not loose and has high strength The shaft and side plate hole have no wear and long service life 5. Bearing capacity of body material: 3.5t Packing list: Stripping machine + blade * 3 + small wrench * 2 + screw accessorie.
- Bulb 1 FEIT Electric 8 watts T5 12 in.Linear Soft White Fluorescent Bulb
- Product ID: 23-40-6001 Milwaukee Rotor Assembly New - Product ID: 23-40-6001 Milwaukee Rotor Assembly New.
- 3/16" Dia. Black Adhesive-Lined Shrink Tubing - ((4) 6" pcs - 2 ft. total) - 3/16" ID (before shrink) black adhesive-lined shrink tubing. Made of polyolefin. Has 3 to 1 shrink ratio. Polyolefin is the standard-bearer in the shrink tubing market. It heats evenly, doesn't bubble or split, and is self-extinguishing.
- Parallax 32400 XBee USB Adapter Board for XBee or XBee Pro - This adapter board can provide an easy interface to the XBee or XBee Pro modules by converting the 2 mm pin spacing to breadboard friendly 0.100” spacing. The adapter board also provides a way to connect pluggable wires or solder connections and also provides mounting holes.
- Rapid-Air R3FT Winding Machine - Tool & Machine Components. Power Supplies. Electric/Motors/Breakers/Power. Unit is missing communication components. Reference Number. Motors, clutch and transmission checked out OK. For parts or repair- This item is being sold as is, as pictured.
- New Klein Tools 50350 13 1/2 Inch Flexible Fish Tape Leader for Fish Tape - Klein Tools 50350 13 1/2 Inch Flexible Fish Tape Leader for Fish Tape *NIB. F.
- Cadweld Parallel Vertical Type Cable Mold PHJ3D2Q - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
- **NEW SEALED** Klein Tools 450-100 Loose Cable Stapler
- CONDUIT PULLING EYES (3) Three pieces - 1 - 1 1/4" conduit fixed head - You are looking at a total of three conduit pulling eyes for 1 - 1 1/4" conduit. (size shown in photos) Obvious wear showing but still many miles of pulling left.
- Deutsch 16-14 Ga. Green Removal Tool #0411-291-1405 (1 per pack) - Deutsch 16-14 Ga. Works with DRC Series, HD Series, HDP Series, and HD10 Series. Tool is made of plastic. Deutsch 0411-291-1405 Green Removal Tool. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Vault Key by Journeyman Gear - Lineman's tool - Introducing the Vault-Key. Like all of our tools, this one solves a very common problem we all have experienced out in the field. The Vault-Key is laser cut out of 3/8" steel plate and powder coated Hi-Viz orange.
- Vintage Ideal Industries Wire Guide For 3/4 Inch Conduit 31 232 Instructions - Vintage Ideal Industries Wire Guide For 3/4 Inch Conduit 31 232 with Instructions sheet Some surface rust from years of storage
- No Clean Soldering Pen And Solder-Braided Tape Set For Electronics-Welding
- Gardner-Denver Wire Wrap Tool 14H-1C Manual Hand - Gardner-Denver Wire Wrap Tool 14H-1C
- USA Wire Stripping Machine Drill Handle Cable Stripper Scrap Copper 1.5mm-20mm - Collecting copper wire for scrap isn't an easy thing to do – nor is it quick. The copper wire stripper can remove the plastic and rubber insulation without damaging the inner conductor, and help to categorize the recyclable part and clear your place up.
- NEW Wire Stripping Machine Drill Handle Cable Stripper Scrap Copper 1.5mm-20mm - Collecting copper wire for scrap isn't an easy thing to do – nor is it quick. The copper wire stripper can remove the plastic and rubber insulation without damaging the inner conductor, and help to categorize the recyclable part and clear your place up.
- Cast Master STP 5000 USA Drill Operated Copper Wire Stripping Machine for Scr... - Cast Master STP 5000 USA Drill Operated Copper Wire Stripping Machine for Scrap Copper Recycling Don't miss this amazing DEAL! Ideally, you want to harness this copper wire stripping device to a stabilized bench clamp in your work and/or you garage.
- Cable Stripper Blade Cut Replacement Tool For Wire Stripping Machine HXSMS-25! - Product description: ★The stripping blade is made of high-quality alloy, with an outer diameter of 49.5 mm, an inner diameter of 28 mm, and a thickness of 15 mm. Compared with ordinary steel blades, it has higher hardness and longer service life. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness. It is processed with advanced precision grinder processing equipment to ensure its accuracy. ★The blade of the cable stripper becomes hard, so it can keep sharp for a long time. It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. ★Enhanced trimming and high temperature quenching can effectively reduce the loss of the blade and extend the service life. The peeling is fast, smooth.
- Lisle Single Pilot Pin Wheel Hanging Stud 14mm x 1.5" 13930 - The product image is the actual item you will receive including all contents unless otherwise noted. We are not an authorized dealer of this product. This product has no manufacturers warranty.
- Manual Wire Cable Stripping Peeling Machine Automatic Scrap Stripper US - Automatic Scrap Cable Stripper Electric Wire Stripping Machine Copper Recycling. Can Be Operated by One Person or Two Person to Improve Stripping Efficiency and Output. Stripping Range: 1-20mm / 0.04-0.79in.
- High-strength Replacealbe Spare Blade For Electric Copper Wire Stripper - It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. 1X spare blade for wire stripper. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness.
- Manual Wire Stripping Machine Scrap Cable Peeling Stripper Recycle Tools 1-20mm - Characteristic: Stripping Fixture. 1 X Stripping Machine. Clamp Material: Bearing Steel. Style: Stripped of Used Wire and Cable. The Cutter Head Is a Fragile Accessory. The Cutter Head Can Be Sharped with a Sharpening Stone.
- *NEW* Snap-On Tools 61CF HI VIZ TalonGrip™ 8" Duck Bill Pliers FREE SHIPPING - Hello my friends.
- NEW Snap On 29ACF HI VIZ Handle - 9" Wire Terminal Crimping Tool - FREE SHIPPING - Hello my friends.
- Durable Manual Scrap Wire Cable Stripping Machine Black for 1-20mm Diameter Wire - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Electrician's Scissors, Nickel Plated | Klein Tools Stripping Scissors Notches - They cut wire, cable and cordage including electrical communication 19 AWG and 23 AWG wire. The upper blade features wire stripping notches. The serrated lower blade allows for non-slip cutting action.
- US Manual Wire Stripping Machine Cable Peeler Metal Recycle Tool Scrap Stripper - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- *NEW* Snap On 388ACF POWER BLUE 8" High Leverage Diagonal Cutter - FREE SHIPPING - Up for grabs is a New set of Snap-on Tools 388ACFPOWER BLUE 8" High Leverage Diagonal Cutter.
- NEW Snap On 29ACF POWER BLUE Handle - 9" Wire Terminal Crimping Tool - Free Ship
- *NEW* Snap On 61CF POWER BLUE TalonGrip™ 8" Duck Bill Pliers FREE SHIPPING
- *NEW* Snap On PWCS7ACF Power Blue Grips Wire Cutter, Stripper & Crimper Pliers - Up for grabs is a New set of Snap On PWCSS7ACF Power Blue Handle - Wire Cutter, Stripper And Crimper Pliers.
- Cable Stripper Blade Cut Replacement Tool For Wire Stripping Machine HXSMS-25 - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- *NEW* Snap On PWCS7ACF HI VIZ Handle - Wire Cutter, Stripper And Crimper Pliers. - Up for grabs is a New set of Snap On PWCS7ACF HI VIZ YELLOW Handle - Wire Cutter, Stripper And Crimper Pliers. Hello my friends.
- Cable Stripper Blade Cut Replacement Tool For Wire Stripping Machine HXSMS-25 - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Workbench Table Mat High Temperature Resistance Anti-Static ESD Mat 118" x 23" - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Cementex 1000v Insulated Wrench 7/16" lot of 3 - Cementex 1000v Insulated Wrench 7/16" lot of 3.
- MONARCH 6241-010 Digital Stroboscope,3400 Lux,0.001 FPM - Digital Stroboscope,3400 Lux,0.001 FPM. MONARCH 6241-010. Governing Law; Limitations. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- Bayco Bulb Extractor
- 9-Amp 14-Inch Electric Chainsaw Electric Motor Rotates The Included Chain - Simply plug the cord into the power source of your choice and start chopping. The auto-oiling system lubricates the guide bar and chain as you cut to elongate the life of both the chain and the saw itself.
- 10-Amp 7" Variable Speed Polisher with Digital Readout USA - The onboard screen illuminates the current speed to help users know the exact RPM while the hook-and-loop base makes switching polishing pads easier than ever. The 10A motor gives reliability and power required by professional and specialty car communities.
- Ims Company Heated Gate Cutters W/ Controller Fhc-3 - I am not here to piss people off, in fact, I believe a good deal is when both parties are happy!
- No-Clean Soldering Pen And Solder Braided Tape Set For Electronics Welding Parts
- AMP 90417-1 Ratcheting Crimper Hand Crimp Tool - Missing 1 Pin Attaching Head
- AMP 90066-7 Ratcheting Crimper Hand Crimp Tool for Type III Type VI & MATE-N-LOK
- Ideal 11-200 Carbide Point for 11-100, 11-102, 11-111, 11-113 - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- L-4994 - Blades 45-097 16-26 AWG - (Pack of 1) - IDEAL #L-4994 - Blades 45-097 16-26 AWG. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Ideal 44-103 - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- No-Clean Soldering Pen And Solder Braided Tape Set For Electronics Welding Parts
- Cementex Insulated Torque Wrenches with Ratchet Extension & Sockets
- Vintage Wiss Electrician Scissors USA Made 5.25” Model 175E Wire Cutting Steel - Vintage Wiss Electrician Scissors USA Made 5.25” Model 175E Wire Cutting Steel. These are a unrestored vintage pair of wiss scissors. Please see all photos for complete description of this item. The pivotal pin action works perfectly fine but scissors could benefit from a good cleaning and sharpening.
- CAL-HAWK CWS07 - 6-1/2 In Automatic Wire Stripper Crimping Tool delayed cutting - The Automatic Wire Stripper Pliers features delayed cutting to prevent crushing or cutting even the finest wire or wire filaments! Just insert your wire, squeeze handles and you have a perfectly stripped wire!! Great tool to keep handy in the tool box for around the house and garage uses! FEATURES: ---Just insert your wire, squeeze handles and you have a perfectly stripped wire ---Great tool to keep handy in the tool box for around the house and garage uses ---Features delayed cutting to prevent crushing or cutting even the finest wire or wire filaments Note: Specifications are approximate and subject to change. BRAND......................... Cal-Hawl ITEM Number............. CWS07 UPC Number............... 091044325303 SHIPPING Weight....... 11 oz MADE IN...................... China LOCATION................... [ S2-2 ].
- 3/4" Dia. Black Heavy Duty Adhesive-Lined Shrink Tubing - (4 ft. piece) - 3/4" ID (before shrink) black heavy duty adhesive-lined shrink tubing. Made of polyolefin. Has 3 to 1 shrink ratio. Polyolefin is the standard-bearer in the shrink tubing market. It heats evenly, doesn't bubble or split, and is self-extinguishing.
- Klein Tools 63364 - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- vintage Thin Profile Pliers 6” - Nice pliers.No owners marks.Joint tight.0.2” thick jaws.vintage Thin Profile Pliers 6”. Wgfc7-3
- Vintage Boker Tree Brand Electrical/Networking/Splicing Scissors (Aka Snips) - (sEE ALL 3 PICTURES).
- Reinforced Steel Bar Bender Portable Electric Steel Bar Bending machine
- GRAINGER APPROVED 3LP62 Connector,Steel,Overall L 1 7/8in - GRAINGER APPROVED 3LP62. Grainger reserves the right to accept or reject any order. Grainger Part #:3LP62. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- RAYCHEM CPGI-CRSM-34/10-1200 Spl Kit,1000 V,8 AWG,2/0 AWG - RAYCHEM CPGI-CRSM-34/10-1200. Spl Kit,1000 V,8 AWG,2/0 AWG. Grainger reserves the right to accept or reject any order. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- Ball blade Manual Waste Cable Wire Stripping Machine Black Bearing Steel Clamp - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- VEVOR Wire Stripping Machine Drill Handle Cable Stripper Scrap Copper 1.5mm-20mm - Why Choose VEVOR?. Collecting copper wire for scrap isn't an easy thing to do – nor is it quick. The copper wire stripper can remove the plastic and rubber insulation without damaging the inner conductor, and help to categorize the recyclable part and clear your place up.
- 10-60mm Seperate Wire Twisting Machine Brush Wire Twisting Wire Machine 220V - Twisting wire length: 10-60mm. Winding range: 0.1-2㎡.
- PC Building Rubber Anti Static Mat, Green Grounding Roll ESD Floor Mat For Table - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- 3X (air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black L7E2) - 3X(Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff Inneren, Kompressorschalldämpfer als Zulassungsöffnung. ).
- 2x (air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black M3O2) - 2X(Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff Inneren, Kompressorschalldämpfer als Zulassungsöffnung. ).
- Cable Stripper Replacement Blade Cable Stripper Blade Cutter For Wire Stripper - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- 0.59'' Thickness Wire Stripper Blade for Electric Copper Cable Stripping Machine - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Cable Stripper Blade Alloy Spare Blade For Hxsms-25 & 26 Wire Stripping Machine - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Wire Peeler Blade Replacement Blade 15mm Alloy for Copper Wire Stripping Machine - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Cable Stripping Blade F/Hxsms-25 & Hxsms-26 Electric Cable Stripping Machine USA - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Cable Stripper Blade Cutter Replacement For Copper Wire Stripping Machine - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Wire Stripper Blade 15mm Thickness for Hxsms-25 & 26 Wire Stripping Machine NEW - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Stripper Blade Alloy Spare Blade for Hxsms-25 & Hxsms-26 Wire Stripping Machine - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Stripper Blade High-quality Replacement Blade F/Hxsms-25& Hxsms26 Wire Stripper - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- For Wire Stripper Spare Blade Replacement Blade for Wire Stripping Machine NEW - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Cable Stripping Replacement Blade Durable For Hxsms-25 & Hxsms-26 Cable Stripper - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Durable 15mm Spare Stripper Blade For HXSMS-25 & HXSMS-26 Wire Stripping Machine - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Cable Stripper Blade Cutter for Electric Copper Wire Stripping Machine 15mm - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Cable Peeler Blade Durable Wire Scraper Blade for Wire Stripping Machine NEW - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Cable Peeler Blade Wire Scrapping Blade for Alloy/Copper Wire Stripping Machine - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Spare Stripping Blade Electric Cable Stripper Blade for Wire Stripper Machine - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Round Spare Blade Cable Stripper Blade Stripping Cutter for HXSMS-25 HXSMS-26 - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Cable Stripper Blade Alloy Replacement Blade Durable for Copper Wire Stripper - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Alloy Stripper Spare Blade Round for Wire Stripping Machine Replacement Blade - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- 0.59'' Wire Stripper Blade Spare Blade for Hxsms-25&26 Wire Stripping Machine - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Wire Stripper Blade Durable Blade Fits Hxsms-25 &Hxsms-26 Wire Stripping Machine - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- 15mm Cable Stripper Blade for Hxsms-25 & Hxsms-26 Copper Wire Stripping Machine - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Cable Stripper Copper Wire Stripping Machine Replacement Blade 15mm NEW - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Stripper Blade Replacement Blade for Electric Copper Wire Stripping Machine NEW - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Cable Stripping Blade Durable 15mm Fits Hxsms-25 & 26 Wire Stripping Machine - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Cable Stripper Blade Alloy 15mm for HXSMS-25 & HXSMS-26 Wire Stripping Machine - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- 1.95" 65mm Wire Stripper Spare Blade For Copper /Cable Wire Stripping USA - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Cable Stripper Blade for Hxsms-25 & Hxsms-26 Wire Stripping Machine Spare Blade - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Cable Scraper Blade Replacement Blade Durable Blade for Wire Stripping Machine - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Cable Peeler Blade Fits for Hxsms-25 & 26 Wire Stripping Machine Spare Blade - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Cable Stripper Blade Round Replacement Blade for Electtic Wire Stripping Machine - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Wire Cable Stripper Blade Replacement 15mm for Copper Wire Stripping Machine - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Wire Stripper Replacement Blade 0.59'' Thickness Cable Stripping Machine Blade - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- 110V Hand-enameled Magnet Wire Stripping Stripper Cutter Machine Compat Durable - Pro DF-8 handheld Magnet wire Stripping Machine / stripper Cutter 110V. Output Speed. Your satis faction is our ultimate goal. length 5 ~ 50mm. 0.3 ~ 2.5mm.
- Manual Wire Cable Stripping Peeling Machine Peeling Stripper Bearing Steel New - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Manual Wire Cable Stripping Machine Copper Peeling Stripper Bearing Steel Black - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Electric Cable Stripper Copper Wire Stripping Machine Replacement Blade Cutter - Product description: ★The stripping blade is made of high-quality alloy, with an outer diameter of 49.5 mm, an inner diameter of 28 mm, and a thickness of 15 mm. Compared with ordinary steel blades, it has higher hardness and longer service life. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness. It is processed with advanced precision grinder processing equipment to ensure its accuracy. ★The blade of the cable stripper becomes hard, so it can keep sharp for a long time. It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. ★Enhanced trimming and high temperature quenching can effectively reduce the loss of the blade and extend the service life. The peeling is fast, smooth.
- Energizer Eveready 50 lumens Floating Lantern LED D Red Red - . Energizer Sub Brand. Eveready Lumens. 50 lumens Product Type. Floating Lantern Bulb Type. LED Battery Size. D Color Family. Red Batteries Included. Yes Casing Material. Plastic Number of Batteries Required. 2 Impact Resistant. No Battery Type. Alkaline Pivoting Light. No Packaging Type. Carded Rechargeable. No ReadyFlex floating lantern *ReadyFlex technology runs on two or four D batteries *Powerful beam and extraordinary runtime up to 160 hours (4 CZ batteries) or 350 hours (4 Alkaline batteries) *Shines up to four times brighter than standard LED technology.
- Meisei M-20 Hotweezers Wire Strippers - Meisei M-20 Hotweezers. For wire stripping. This was used only a handful of times. No longer needed. Work excellent. In full working order. Plug and play ready. This is an excellent deal. Tweezers alone run over $300 each.
- Manual Wire Stripping Machine Scrap Peeling Stripper Electrical Recycle Tool USA - Stripping machine + blade 3 + small wrench 2 + screw accessories. Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc. The shaft and side plate hole have no wear and long service life.
- Ball blade Manual Waste Cable Wire Stripping Machine Cable Stripper Black New - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- High-strength Alloy Electric Replacealbe Spare Blade For Wire Stripper Smooth US - It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. 1X spare blade for wire stripper. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness.
- 15mm Spare Stripper Blade Fit HXSMS-25 & HXSMS-26 Wire Stripping Machine New - Durable 15mm Spare Stripper Blade For HXSMS-25 & HXSMS-26 Wire Stripping Machine. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. 1x Spare Blade for Wire Stripper.
- Manual Wire Stripping Machine Cable Peeling Stripper Scrap Metal Recycle Tool - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Jokari 20050 Ergonomic Super 4 Plus Automatic Wire Stripper for Wires from 0.... - Original JOKARI quality Product made in Germany. Adjustable length stopper and a plier handle design with lockable grip.
- NEW Bearing Steel Clamp Stripping Machine Black Durable For 1-20mm Diameter Wire - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Bayco Bulb Extractor - NOT FOR INTERNATIONAL .
- Wiha Tools 12852 Insulated Ratchet, 3/8" x 190 mm - Wiha Tools 12852 Insulated Ratchet, 3/8" x 190 mm.
- Malco MBL Leg Set with Bases and Fasteners - The Mini Brake Portable Leg Kit, MBL, includes: Legs and Mounting Hardware, bases and fasteners. THE MBL is for use with the Malco MB48A Mini Brake and the Malco MB48B Mini Pan Brake. The optional leg kit for the Malco Mini Brake is quick and easy to install.
- Cable Stripper Blade Cut Electric Copper Wire Stripping Machine Replacement Tool - It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. 1X spare blade for wire stripper. Compared with ordinary steel blades, it has higher hardness and longer service life.
- Dewalt D28114N 4 1/2"/ 5" Angle Grinder - Dewalt D28114N 4 1/2"/ 5" Angle Grinder.
- ⭐⭐TWO X Daniels DMC⭐⭐ M81969/17-05 DAK12A Insertion Tool **GOVERNMENTSURPLUS** - DAK12A Insertion Tool.
- Pro'sKit TC-267 Heavy Duty Waterproof Case, 33lb. capacity, 13" x 9" x 6.7" Size - Pro'sKit TC-267 Heavy Duty Waterproof Case, 33lb. capacity, 13" x 9" x 6.7" Size. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Heavy Duty Deutsch 12 Ga. Yellow Metal Removal Tool (1 per pack) - Works with DTP Series, DTCE Series, DTHD Series, HD10 Series, and HD30 Series. Tool has a stainless steel shaft and aluminum handle. Heavy Duty Deutsch 12 Ga. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- VDV999-076 Replacement Blades, Crimper Blades, for Use with Pass Thru Modular C - Durable and heat treated. For use with Pass-Thru Crimper vdv226-110. Durable, heat treated blades. Klein's Pass-Thru Crimper blade lasts over 2, 000 cuts. For voice and data applications tool. Blades cut paired-conductor cables (round STP/UTP and flat-satin phone cables).
- U.S. Safety Grinder Guard Assembly With Lens 5 X 6 And 2 Spare Lens ***NEW *** - U.S. Safety Grinder Guard Assembly With Lens 5 x 6 . *** NEW *** In Box. This unit comes with one (1) lens and also includes two (2) spare lens.THANKS for looking
- U.S. Safety Grinder Guard Assembly With Lens 6X8. *** NEW *** In Box - U.S. Safety Grinder Guard Assembly With Lens 6X8. *** NEW *** In Box. I have 3 of these units size 6 x 8. ANDI have 1 unit 5 x 6 with 2 spare clear lens….. (also listed)THANKS for looking
- Wire Stripper Cutter Electrical Installer Industrial Pro Heavy Duty - Industrial Pro Heavy Duty Wire Stripper Cutter Electrical InstallerGet your tools for the right job.Great gift..
- MONARCH 6245-011 Digital Stroboscope Kit,5500 Lux - Digital Stroboscope Kit,5500 Lux. MONARCH 6245-011. Grainger reserves the right to accept or reject any order. Governing Law; Limitations. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion.
- GRAINGER APPROVED 5DPD5 Slump Cone Test Set - GRAINGER APPROVED 5DPD5. Slump Cone Test Set, Complies With ASTM C31, C143, C172, C192, C232, AASHTO T23, T119, T126, T141, T158, Includes H-3636 (5DPD6) Base Plate, H-3638 Funnel, H-3639.20 Brush, H-3640 (5DPD8) Slump Cone, H-3651 (5DPE1) Tamping Rod, H-3731 Scoop.
- Black Manual Wire Stripping Cable Machine Scrap Stripper Metal Recycle Tool SALE - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Continuity Tester | Gardner Bender Economy Circuit Integrity Of Gb Inc Total - Tests fuses, extension cords, light bulbs, point-to-point wiring, and even trailer harnesses. Equipped wih a 1 year warranty. Bright indicator bulb lights if continuity exists. insulated test lead with alligator clip.
- Used Hubbard & Co. 1240 Dies for Pushing Bushings for 69 kv Line Structures ???? - Dies for pushing bushings for 69 kv line structures. (At least that is what I was told.). Used Hubbard & Co. Power Line Tools. See the last picture. You get what's in the pictures.
- Tallman DDIN AHB-4, Tower Block, Used - Tallman DDIN AHB-4, Tower Block, Used.
- IWS-10WF(0.5-10MM)Ratchet Terminal Crimping Tool For Wire Ferrules And End Slee - The components of the ratchet crimping tools are made of special steel. Range of Application: For wire Ferrules, End Sleeves. Due to best handle grasping position,light and compact structure and handle design ensure perfect crimping effect.
- HS-35WF(10-35MM2) Ratchet Terminal Crimping Tool For Wire Ferrules And End Slee - The components of the ratchet crimping tools are made of special steel. Range of Application: For wire Ferrules, End Sleeves. Due to best handle grasping position,light and compact structure and handle design ensure perfect crimping effect.
- Xcelite 378MN 5-1/2" Electronic Pliers Thin Profile - For your consideration is aXcelite 378MN 5-1/2" Electronic Pliers Thin Profile.
- Eaton Bussmann FP-2 Buss Fuse Puller - Eaton Bussmann FP-2 Buss Fuse Puller.
- Ratchet Crimp Tool for 24-10 Ga. Ferrules (1 per pack) - Will also crimp DIN 46228 Pt#1 & #4 or EN 60947-1 type wire ferrules. Tool features an ultra-smooth ratcheting system with quick release. A unique rotating die design allows for front and side wire ferrule insertion.
- GRAINGER APPROVED V500 1/4Y Washer,Steel,Overall W 1 5/8in,PK25 - Washer,Steel,Overall W 1 5/8in,PK25. GRAINGER APPROVED V500 1/4Y. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAK5. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Car motorcycle hand siphon siphon pumps oil gasoline fuel liquid suction D8U9 - Kann zum Entfernen von Wasser aus verstopften Waschbecken, Wasserbetten, kaputten Waschmaschinen, Booten und Poolabdeckungen verwendet werden. Übertragen Sie den schnell und sicher aus dem Kerosinbehälter in die Heizung.
- Original Drill-Powered Wire Stripper Machine - Manual Wire Stripping Made Eas... - Ultra-Grip Wire Stripper Technology: Our stripping machine improved with ultra-grip wire feeder technology. This technology massively increases torque, reduces slippage and straightens mangled wires to get them through the drill-powered wire stripper tool.
- PC Building Rubber Anti Static Mat, Green Grounding Roll ESD Floor Mat For Table - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Halex 32606B Solderless Terminal Lug - Halex 32606B Solderless Terminal Lug New.
- WESTWARD TTPPB26G Black,Caster,5 in Dia.,PR - TTPPB26G, Finish Galvanized (hardware), Includes Screws, Washers, Number of Casters 2, 1 Pair. WESTWARD TTPPB26G. Black,Caster,5 in Dia.,PR. Power adapters and other modifications may be necessary for proper operation in other countries.
- WESTWARD TTPPF26G Black,Caster,5 in Dia.,PK2 - WESTWARD TTPPF26G. Black,Caster,5 in Dia.,PK2. Power adapters and other modifications may be necessary for proper operation in other countries. Grainger reserves the right to accept or reject any order.
- Knipex Automatic Wire Insulation Stripper - - Strips cables with standard materials without any need for manual adjustment - Narrow head style for use in confined areas - Precise stripping from 0.2 up to 6.0 mm - Made in Germany.
- Crimper DMC M300-25A Adjustable Crimping Daniels Tool Aviation USED - Crimper DMC M300-25A Adjustable Crimping Daniels Tool Aviation USED. Comes as pictured, nothing more or less. Works great and in great condition. Doesn’t have any accessories or paperwork. (C4)
- 3m Scotch Super 88 Lot Of 3 Vinyl Electrical Tape. Heaven- Duty Grade -BRAND NEW - 3m Scotch Super 88 - Lot Of 3 Rolls of Vinyl Electrical Tape. Heaven- Duty Grade -BRAND NEW. 3/4 IN x 66 FT(22YD)x .0085IN
- L-7486 - Replacement Blades 45-128 - 2/PK
- Bussmann Plug Fuse 20 amps 125 volts-Mfg# BP/S-20 - 2 PK - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- 3/16" Dia. Clear Adhesive-Lined Shrink Tubing - ((4) 6" pcs - 2 ft. total) - 3/16" ID (before shrink) clear adhesive-lined shrink tubing. Made of polyolefin. Has 3 to 1 shrink ratio. Polyolefin is the standard-bearer in the shrink tubing market. It heats evenly, doesn't bubble or split, and is self-extinguishing.
- Waldom Electronics W-HTR-1719C Crimping tool Patent PAT. 3157075, 698241 M7 - Waldom Electronics Crimping Tool Patent Number PAT. 3157075, 698241 M7.
- Fiberglass Cloth Tape | 6 oz | 2" Wide by 50 Yards - Woven fiberglass cloth, ideal for wrapping tubular structures, electrical cables, or machinery. Great for electronics, waterproofing, insulation, heat resistance, fire resistance, anti-rust. - 6 oz per square yard, 2” wide x 150 feet long (50 yards).
- Blastrac 1-8DM shot blaster 8” 220v - Blastrac 1-8DM shot blaster 8”. It runs on single phase 220 power. This was only used on one job and is like new in excellent condition. Sells new for $9000. Local pick up preferred but can calculate freight if needed. Please see our other options for more used equipment..
- Lot of 17 Bachi Sarcem Coil Winding Cable Guides T19807 - Removed from a sarcem BO69 Multispindle winding machine, 1 lot of 17. Semiconductor & PCB Equip. Racks, Mounts, & Patch Panels. Tool & Machine Components. Product Information. Warranty Information. Power Supplies.
- Hastings Voltage Hot Stick 8206 6' 6" (Used) - HASTINGS VOLTAGE HOT STICK 8206 6' 6" (USED). Unit 2
- Car Circuit Scanner Digital Diagnostic ToolTracker Truck Tractor SUV Wire Tester - It is designed to identify and trace-wires or cables-without damaging the insulation. It also can be used in checking short circuit, locating open circuit, wire tracing, wire identification and more.
- Westward Ttlk002g Lock Set For Chest Series - Light Industrial. & Recepticles. Electrical Outlets. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
- BOSCH GST 135 BCE Professional Jigsaw 230 Volts - Used and in good working condition. Kindly refer all images. Heavy duty industrial jigsaw. 230 Volts.
- Cable Stripper Blade Cut Replacement Tool For Wire Stripping Machine HXSMS-25 - Product description: ★The stripping blade is made of high-quality alloy, with an outer diameter of 49.5 mm, an inner diameter of 28 mm, and a thickness of 15 mm. Compared with ordinary steel blades, it has higher hardness and longer service life. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness. It is processed with advanced precision grinder processing equipment to ensure its accuracy. ★The blade of the cable stripper becomes hard, so it can keep sharp for a long time. It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. ★Enhanced trimming and high temperature quenching can effectively reduce the loss of the blade and extend the service life. The peeling is fast, smooth.
- Manual Copper Wire Stripping Machine Cable Wire Stripper Recycling 1-20mm USA - Manual Wire Cable Stripping Peeling Machine Scrap Stripper for 1-20mm Wire USA. Can be operated by one person or two person to improve stripping efficiency and output. Stripping range: 1-20mm / 0.04-0.79in.
- Gardner Bender Sperry 600V AC Digital Compact Clamp Meter GCM-221 Gardner Bender - Voltage range: AC voltage 600V; Current range: AC current 600A; Functions: Resistance 200 ohm. Specifications: Auto ranging. Total functions: 3. Total Ranges: 3. Display count: 1000. Jaw size: 1-1/4". Accuracy: AC V: + 1.5%, AC A: + 2.0%, ohm: + 1.0%. Uses (1) AA battery (included) and includes 1 spare. 5A/250V fuses. UL (Underwriter's Laboratories) listed. 1 year limited warranty. Voltage: 600V AC .Battery Type: (1) AA (Included) .Certification: .
- Gardner Bender Sperry 2-Probe Single Indication Voltage Tester ET6102 Gardner - High visibility voltage tester. Tests 80V to 25V AC/DC. Twin probe. Easy-to-see indicator light. Test lead holder built into the case for added convenience. Fits a standard outlet. UL listed. Type: Contact, Single Indiation .AC Voltage: 80V to 250V AC .DC Voltage: 80V to 250V DC .Power Source: .Lead Length: 3 In. .Certification: UL Listed .
- HIOKI DC high voltage probe DC2000V measurement Photovoltaic maintenan P2000 - Is there anything else you're looking for in Japan?.
- Manual Wire Stripping Machine f/ Scrap Cable Stripper Copper Recycling Tool 32mm - Manual Wire Stripping Machine 3 blades Scrap Cable Peeling Stripper Machine 32mm. Stripping machine + blade 3 + small wrench 2 + screw accessories. Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc.
- Fiberglass Cloth Tape | 6 oz | 2" Wide by 50 Yards
- Cooper Tools Wire Wrap 28000AC1 - Aviation
- Cable Stripper Blade Electric Copper Wire Stripping Machine Replacement Cutters - It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. 1X spare blade for wire stripper. Compared with ordinary steel blades, it has higher hardness and longer service life.
- Himalayan Glow SPT-2 Original Replacement Electric Cord with ETL Certified
- No-Clean Soldering Pen And Solder Braided Tape Set For Electronics Welding Parts - High-Quality Material: Our solder wick is made of quality copper wire and precise weaving technology, enhancing tension on the surface to absorb excess solder. The solder remover wick features good thermal conductivity and absorption, reducing the risk of thermal injury to circuit boards.
- No-Clean Soldering Pen And Solder Braided Tape Set For Electronics Welding Parts - High-Quality Material: Our solder wick is made of quality copper wire and precise weaving technology, enhancing tension on the surface to absorb excess solder. The solder remover wick features good thermal conductivity and absorption, reducing the risk of thermal injury to circuit boards.
- Maquina De Pelar Cables Electricos Extraccion De Cables para Centro de Reciclaje - Uso amplio: esta máquina es ideal para cualquier cable duro o cable suave. Este reciclador de alambre de cobre separará el aislamiento de plástico y goma del alambre de chatarra sin daños, un imprescindible para el reciclaje de alambre de cobre.
- Manual Wire Stripping Machine Scrap Peeling Stripper Electrical Recycle Tool USA - Stripping machine + blade 3 + small wrench 2 + screw accessories. Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc. The shaft and side plate hole have no wear and long service life.
- Alloy Electric Replacealbe Spare Blade For Electric Copper Wire Stripper USA - It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. 1X spare blade for wire stripper. Compared with ordinary steel blades, it has higher hardness and longer service life.
- Anti-Static ESD Soldering Mat Roll Rubber Grounding Mat Electronics Working Pad - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- New SQL10-6 Rectifier For Generator - 1 Pieces New SQL10-6 Rectifier For Generator.
- ESD Anti Static Heat Resistant Table Mat ~ 118" x23.6" for Tech Repair & Solder - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Agc 3 Bus Coupling Assembly Single Phase
- RUBBER ANTI STATIC ESD HI-TEMP SOLDERING MAT GROUND MAT Electronics Working Mat - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Lot of Two (2pcs) HUBBELL PREMISE WIRING 1) 3' White & 1) 7' Yellow Cord Cat. 6 - (New - Lot of Two: 1) 3' White and 1) 7' Yellow Category 6 patch cords.
- PC Building Rubber Anti Static Mat, Green Grounding Roll ESD Floor Mat For Table - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Lot of Three (3pcs) HUBBELL PREMISE WIRING 3-Foot Blue Patch Cord Cat 5E - New - Lot of Three 3 ft Category 5E patch cords - Blue.
- Lot of Eleven (11pcs) HUBBELL PREMISE WIRING 1-Foot White Patch Cord Cat 5E - New - Lot of Eleven 1 ft Category 5E patch cords.
- Ideal Tools Giant Safe-T-Grip Fuse Puller 34-003 Made in USA - Giant Size Fuse Puller Catalog #34-003. Ideal Fuse Puller. Made in USA!
- Greenlee 56270 4' CAT IV 600V CAT III 1000V Optical Cable for FF200 FishFinder - CABLE ONLY.
- Fiberglass Cloth Tape | 6 oz | 2" Wide by 50 Yards - 2" Fiberglass Cloth Tape is a narrow woven fiberglass cloth. It is ideal for wrapping tubular structures. Also great for reinforcing corners and edges. The tape is made with e-glass. The tape is NOT adhesive backed.
- Ideal Industries 45-133B Thermo-Strip Thermal Wire Stripper In Great Condition. - IDEAL INDUSTRIES 45-133B THERMO-STRIP THERMAL WIRE STRIPPER Base unit. In unknown working condition, light comes on when power is applied. Does not include stripper tool.
- Klein Tools KT223X4INS Lineman's 4-In-1 Insulating Box Wrench Made In The USA
- Vintage Channellock No. 337-W Electricians Diagonal Cutting Pliers - Usa - (sEE ALL 5 PICTURES).
- Fluke Networks DSX-PLA004S CAT 6A/CLASS EA Permanent Link Adapter Set - Fluke Networks DSX-PLA004S CAT 6A/CLASS EA Permanent Link Adapter Set.
- New Fluke Networks DSX-PLA804S DSX-8000 Cat 8/Class Permanent Link Adapter Set - New Fluke Networks DSX-PLA804S DSX-8000 Cat 8/Class Permanent Link Adapter Set.
- Electronic apparatus tool mixed lot. - A mixed lot of testing apparatus for any electronic. all included. the wait is about over 4 LB.
- WESTWARD TTTPRF42G Black,Caster,5 in Dia. - TTTPRF42G, Finish Galvanized (hardware), Includes Screws, Washers, Number of Casters 2. WESTWARD TTTPRF42G. Black,Caster,5 in Dia. Power adapters and other modifications may be necessary for proper operation in other countries.
- KNIPEX Tools - Open End Wrench, 7/16", 1000V Insulated(98 00 7/16") - KNIPEX - 98 00 7/16" - 4 1/4" Open End Wrench-1000V Insulated 7/16". WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. Made in Germany.
- GREENLEE Gangbox USED - In very good shape. Inside is very clean with almost no wear. Have multiple available. • Depth: 30". • Width: 48".
- Cementex 1000V+ Insulated 3/8” Drive Ratchet - Lightly used. Still in great condition.
- Automatic Wire Stripping Machine Electricians DIY Cable Stripper Tool w Casters - The sturdy casters lock securely and hold everything stable while remaining easy to maneuver anywhere you want for easy storage and quick transport when your work is done. AUTOMATIC STRIPPING : This automated wire stripper removes plastic and rubber insulation from old electrical wiring at speeds of up to 98 feet per minute, powering its fifteen blades with a highly efficient 2200W motor.
- Cable Stripping Tool w 3HP Motor & 12 Channels for 0.04-1.57 Inch Cords Wires - The sturdy casters lock securely and hold everything stable while remaining easy to maneuver anywhere you want for easy storage and quick transport when your work is done. AUTOMATIC STRIPPING : This automated wire stripper removes plastic and rubber insulation from old electrical wiring at speeds of up to 98 feet per minute, powering its fifteen blades with a highly efficient 2200W motor.
- Automatic Wire Stripper 7/0 to 18 Gauge Industrial Copper Wiring Stripping Tool - The sturdy casters lock securely and hold everything stable while remaining easy to maneuver anywhere you want for easy storage and quick transport when your work is done. AUTOMATIC STRIPPING : This automated wire stripper removes plastic and rubber insulation from old electrical wiring at speeds of up to 98 feet per minute, powering its fifteen blades with a highly efficient 2200W motor.
- Industrial Wire Stripper with 12 Channels and 15 Blades for Scrap Copper Wire - The sturdy casters lock securely and hold everything stable while remaining easy to maneuver anywhere you want for easy storage and quick transport when your work is done. AUTOMATIC STRIPPING : This automated wire stripper removes plastic and rubber insulation from old electrical wiring at speeds of up to 98 feet per minute, powering its fifteen blades with a highly efficient 2200W motor.
- Auto Wire Stripper Electric Cable Stripping Machine Tool for 7/0 - 18 Gauge Wire - The sturdy casters lock securely and hold everything stable while remaining easy to maneuver anywhere you want for easy storage and quick transport when your work is done. AUTOMATIC STRIPPING : This automated wire stripper removes plastic and rubber insulation from old electrical wiring at speeds of up to 98 feet per minute, powering its fifteen blades with a highly efficient 2200W motor.
- Eaton 200 amps 120/240 volts Surface Ringless Meter Grey - . Eaton Amps. 200 amps Volts. 120/240 volts Mounting Type. Surface Circuit Protection Type. Ringless Product Type. Meter Socket Assembled Depth. 5 in. Packaging Type. Boxed UL Listed. Yes Indoor and Outdoor. Outdoor Breakers Included. No Assembled Height. 15-3/4 in. Length. 15.75 Assembled Width. 8-1/2 in. Single meter socket with cover. OH with horn bypass. Barrel lock provision. #250 kcmil connectors. Small hub opening. AEP approved.
- Industrial Wire Stripping Machine 7/0 - 18 Gauge Electric Copper Wiring Stripper - The sturdy casters lock securely and hold everything stable while remaining easy to maneuver anywhere you want for easy storage and quick transport when your work is done. AUTOMATIC STRIPPING : This automated wire stripper removes plastic and rubber insulation from old electrical wiring at speeds of up to 98 feet per minute, powering its fifteen blades with a highly efficient 2200W motor.
- Electric Wire Stripper 3HP Automatic Cable Stripping Machine 1mm - 40mm Wires - The sturdy casters lock securely and hold everything stable while remaining easy to maneuver anywhere you want for easy storage and quick transport when your work is done. AUTOMATIC STRIPPING : This automated wire stripper removes plastic and rubber insulation from old electrical wiring at speeds of up to 98 feet per minute, powering its fifteen blades with a highly efficient 2200W motor.
- Klein Tools Power Conduit Reamer 1/2",3/4", 1" Conduit 85091 Factory Sealed - FACTORY SEALED AS SEEN IN PICS.
- Milwaukee 48-22-2167 66/110 Punchdown Blade - Punchdown Blade. ~~Milwaukee ~~. ⚫ CONDITION: NEW, NEVER USED.
- Handheld Magnet Wire Stripping Machine / Stripper Cutter 110V fast shipping - Pro DF-8 handheld Magnet wire Stripping Machine / stripper Cutter 110V. Output Speed. Your satis faction is our ultimate goal. length 5 ~ 50mm. 0.3 ~ 2.5mm.
- PC Building Rubber Anti Static Mat, Green Grounding Roll ESD Floor Mat For Table - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Cementex OEW-34 Insulated open End Wrench, 1-1/16 Excellent condition - Cementex OEW-34 Insulated open End Wrench, 1-1/16 Excellent condition , good used condition , please see pics for details and condition , please ask all questions prior to purchase , shipping lower 48 states only , no third party shippers , international shipping completed thru ebay
- Cementex Wrench Set Insulated 8 pieces
- Hastings Body Rescue Hook With Spliced End A30429
- GRAINGER APPROVED FS-200SL GD 120.00 Strut Channel,Steel,Overall L 10ft - GRAINGER APPROVED FS-200SL GD 120.00. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAN6. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Gardner Bender GS-40 Wire Stripper & Looper with Spring 10-24 AWG, 5" - Hi I'm Phillip. Neko is a cat lover fascinated with all things from Japan. Aces is a spirited teenager with a flawless poker face. Nana is a big Harry Potter fan who lives to read, watch movies & sew.
- Manual Wire Cable Stripping Peeling Machine Scrap Stripper Recycle Tool Portable - Manual Wire Cable Stripping Peeling Machine Scrap Stripper for 1-20mm Wire USA. Can be operated by one person or two person to improve stripping efficiency and output. Stripping range: 1-20mm / 0.04-0.79in.
- Waterproof 20-30HP Outboard Motor Cover Outboard Engine Cover 600D Oxford Cloth - Specification Color: Black Style: Modern Condition: New Material: 600D Oxford Cloth Vehicle Service Type: Boat Applicable Outboard Motor: 20-30HP Cover Circumference: 1.65m/ 5.41ft Cover Height: 1.37m/ 4.49ft Package Size: 20*20*5cm/ 7.87*7.87*1.97in Net Weight: 0.4kg/ 0.882lbs Gross Weight: 0.45kg/ 0.992lbs Package Included 1* Outboard Motor Cover 1* Storage Bag.
- PC Building Rubber Anti Static Mat, Green Grounding Roll ESD Floor Mat For Table - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Scrap Cable Stripper Manual Wire Stripping Machine Copper Recycling Tool Kits - Product parameters: Package size: 6.00 x 15.00 x 6.00cm (2.36 * 5.91 * 2.36inch) Gross weight: 1.8kg (3.97lb) Applicable wire range: 1-32mm (10.03-1.26inch) Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc. features: 1. Using multiple turrets, multiple wires can be operated at the same time 2. The screw is fixed firmly and durable, easy to disassemble and assemble, and the whole machine is not easy to be scrapped 3. Not all wires will run automatically. The ones with small resistance and hard wire will do. 4. The frame is not loose and has high strength The shaft and side plate hole have no wear and long service life 5. Bearing capacity of body material: 3.5t Packing list: Stripping machine + blade * 3 + small wrench * 2 + screw accessorie.
- Weller Erem 776E 4 1/4 Diagonal Tapered Relieved Head Cutter Super Full Flush - Item model number: 776E. Another quality Erem product. These micro cutters are suitable for SMD and leads (670EP, 670EPF). The cutters are made from high grade tool steel with cutting edges hardened to 63-65HRc.
- Anti Static ESD Soldering Mat Roll Rubber Grounding Mat Electronics Working Mat - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- PC Building Rubber Anti Static Mat, Green Grounding Roll ESD Floor Mat For Table - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Handheld Magnet Wire Stripping Machine / Stripper Cutter 110V fast shipping - Pro DF-8 handheld Magnet wire Stripping Machine / stripper Cutter 110V. Output Speed. Your satis faction is our ultimate goal. length 5 ~ 50mm. 0.3 ~ 2.5mm.
- Deutsch 20-12 Ga. Crimp Tool (1 per pack) - An inexpensive field crimper for solid Deutsch connectors. The tool features an adjustable pin height locator. Deutsch 20-12 Ga. 4 Way Indent Crimping Tool 20-12 Gauge for Deutsch Connectors. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- 5/8" Dia. Black High-Shrink-Ratio Adhesive-Lined Shrink Tubing - (1 ft. piece) - 5/8" ID (before shrink) black high-shrink-ratio adhesive-lined shrink tubing. Made of polyolefin. Has 4 to 1 shrink ratio. Polyolefin is the standard-bearer in the shrink tubing market. It heats evenly, doesn't bubble or split, and is self-extinguishing.
- 3/4" Dia. Yellow Adhesive-Lined Shrink Tubing - (1 ft. piece) - 3/4" ID (before shrink) yellow adhesive-lined shrink tubing. Made of polyolefin. Has 3 to 1 shrink ratio. Polyolefin is the standard-bearer in the shrink tubing market. It heats evenly, doesn't bubble or split, and is self-extinguishing.
- (Lot of 2) Weller WSA350 Benchmark Smoke Absorbers 120VAC w/ (3) WSA350F Filters - (2) Weller WSA350 Benchmark Smoke Absorber. (3) Weller WSA350F Carbon Filters. Model: WSA350. Manufacturer: Weller. Benchmark Smoke Absorbers. Notes:We plugged these Smoke Absorbers in and the turned on with the switch.
- Anti-Static ESD Soldering Mat Roll Rubber Grounding Mat, Electronics Working Mat - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Portable Household Wire Stripper Stainless Steel Manual Electric Wire Q7L5 - This product is suitable for household wires, soft wires, scatted wires, cable lines and so on. You can use it as a manual wire stripper or connect to the to use as an electric wire stripping tool. Preferred Material: This wire stripper is made of stainless steel material, which is not easy to break and can provide a long service.
- ---Klein Tools CAT 3146 lineman’s 4-way wrench tool USA - All supplies are substantial enough in quality to perform in this second life. Used tool. It is not bent or wanged out of shape. Location : downstairs wall. Mistakes do happen. If you need to do so, do it yourself.
- New 110V DF-8 handheld Magnet wire Stripping Machine /stripper Cutter 12500r/min - DF-8 handheld Magnet wire Stripping Machine /stripper Cutter 110V 12500r/min. Output Speed. Your satis faction is our ultimate goal. length 5 ~ 50mm. 0.3 ~ 2.5mm.
- Soldering Mat Rubber ESD Anti-Static Electrical Grounding Desk Protect Pad - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- PIC GAUGES PRO-311D-404W Pressure Gauge,Heavy Duty,4 In.,20K psi - Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
- Chance Hot Stick Wiping Cloth M1904 18"x18" Silicone Impregnated
- IDEAL 61-360 Multimeter Phase Rotation True RMS HZ-MFD-Auto Off Tester (929-2) - IDEAL 61-360 Multimeter Phase Rotation True RMS HZ-MFD-Auto Off Tester (929-2).
- Platinum Tools 15015C Category 5 6 Cable Jacket Stripper Cat5 Cat6 PVC Wire - Platinum Tools 15015C Category 5 6 Cable Jacket Stripper Cat5 Cat6 PVC Wire
- Vintage Gardner-Denver Wire Wrap Tool Model 27272AA1 - Vintage Gardner-Denver Wire Wrap Tool Model 27272AA1. I plugged it in and it works fine. Very clean. Shipping in the US for $10.95. No sale internationally.
- IDEAL 61-360 Multimeter Phase Rotation True RMS HZ-MFD-Auto Off Tester TESTED - ACCEPTED BACK UNDER ANY CIRCUMSTANCE. MOST OUR ITEM ARE USED UNLESS OTHERWISE STATED.
- Vaco USA Cushion Grip Wire Cutter Crimper Pliers Bolt Cutter Tool No. 1963
- Ls81-740 - Royrods Quick Connect Rod System - (8) 3' Quick Connect Rod Kit - This rod kit combines the shorter 3ft. 1 - Ball Chain Quick Connect Tipp. 2 - Whisk Quick Connect Tip (glow in the dark).
- 3/4" Dia. Red Heavy Duty Adhesive-Lined Shrink Tubing - (4 ft. piece) - 3/4" ID (before shrink) red heavy duty adhesive-lined shrink tubing. Made of polyolefin. Has 3 to 1 shrink ratio. Polyolefin is the standard-bearer in the shrink tubing market. It heats evenly, doesn't bubble or split, and is self-extinguishing.
- Portable Manual Wire Stripping Machine Cable Peeling Tool Industrial Stripper - Manual Wire Cable Stripping Peeling Machine Scrap Stripper for 1-20mm Wire USA. Can be operated by one person or two person to improve stripping efficiency and output. Stripping range: 1-20mm / 0.04-0.79in.
- Manual Copper Wire Stripping Machine Cable Peeling Stripper 1-20mm +Extra Cutter - Manual Wire Cable Stripping Peeling Machine Scrap Stripper for 1-20mm Wire USA. Can be operated by one person or two person to improve stripping efficiency and output. Stripping range: 1-20mm / 0.04-0.79in.
- 1-20mm Manual Copper Wire Stripping Machine Scrap Cable Stripper Recycle Tool - Manual Wire Cable Stripping Peeling Machine Scrap Stripper for 1-20mm Wire USA. Can be operated by one person or two person to improve stripping efficiency and output. Stripping range: 1-20mm / 0.04-0.79in.
- Portable Manual Wire Stripping Machine Scrap Cable Peeling Cutter Recycle Tool - Manual Wire Cable Stripping Peeling Machine Scrap Stripper for 1-20mm Wire USA. Can be operated by one person or two person to improve stripping efficiency and output. Stripping range: 1-20mm / 0.04-0.79in.
- 574L Linemen Staple Stick
- United States Machinery 2200-TU-30 Winding, Winder Machine M3179 - Winding shaft moving correctly. Winding motor is 120/240 Vac. Network Analyzers. Tool & Machine Components. Motor working good. Small clutches are 24VDC. Main big clutch is 90VDC. Networking & Communications.
- Reel Takeup,Wire & Cable Spool Winding, Winder Machine M3176 - Semiconductor & PCB Equip. Tool & Machine Components. STEP MOTORS. Main components are in good working condition. Reference Number. Good overall physical condition. For parts or repair- This item is being sold as is, as pictured.
- Xcelite 1178M 5-5/8" Heavy Duty Shearcutter, Wire Cutters, Made in USA BRAND NEW - Xcelite - Heavy Duty Wire Cutters. Sheer Cutters, Micro Series. Made in USA.
- Lot of Datamax Corporation DMX-REW1 Label Rewinder M0017 - Racks, Mounts, & Patch Panels. Product Information. Warranty Information. Reference Number. Includes AC Adapter. Tested Good. This is a used item and has been checked for basic functionality. Power Supplies.
- Power Probe Car Electric Circuit Tester Short Open Finder Tester Checker Tools - Pierce and clamp the cable with the thread, your hands. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Color:Yellow+Black.
- Electrical Wire Fish Tape Marr 40 ft / 12.2 m. Wire Pulling Electrical Tool
- New 110V DF-8 handheld Magnet wire Stripping Machine /stripper Cutter 12500r/min - DF-8 handheld Magnet wire Stripping Machine /stripper Cutter 110V 12500r/min New. DF-8 handheld Magnet wire Stripping Machine /stripper Cutter 110V 12500r/min. Output Speed. Your satis faction is our ultimate goal.
- Jovil JV200WI Toroidal Winding Machine - Tool & Machine Components. Unit tested for basic functionality. We found that the load switch is not starting the rotation of the wheel, all other functions look OK. Video of unit is available. Reference Number.
- Erico Cadweld PLUSCU Plus Igniter Control Unit w/ Cord - Erico Cadweld PLUSCU Plus Igniter Control Unit w/ Cord. The unit is in perfect condition.
- Upgraded Replacement Wire Passing Wheel for Copper Wire Stripper Machi... - 👍NICKEL-PLATED MATERIAL: The wire passing wheel appearance is nickel-plated material is very nice.
- NEW I GE GE1039-3UPS 43180-57184 RECEPTACLE SURFACE MOUNT 125/250v 30a - NEW I GE GE1039-3UPS 43180-57184 RECEPTACLE SURFACE MOUNT 125/250v 30a.
- Scrap Cable Stripper Manual Wire Stripping Machine Copper Recycling Tool Kits US - Product parameters: Package size: 6.00 x 15.00 x 6.00cm (2.36 * 5.91 * 2.36inch) Gross weight: 1.8kg (3.97lb) Applicable wire range: 1-32mm (10.03-1.26inch) Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc. features: 1. Using multiple turrets, multiple wires can be operated at the same time 2. The screw is fixed firmly and durable, easy to disassemble and assemble, and the whole machine is not easy to be scrapped 3. Not all wires will run automatically. The ones with small resistance and hard wire will do. 4. The frame is not loose and has high strength The shaft and side plate hole have no wear and long service life 5. Bearing capacity of body material: 3.5t Packing list: Stripping machine + blade * 3 + small wrench * 2 + screw accessorie.
- 20-30HP Outboard Motor Cover 600D Waterproof Full Outboard Motor Engine Cover - Specification Color: Black Style: Modern Condition: New Material: 600d Oxford Cloth Vehicle Service Type: Boat Applicable Outboard Motor: 20-30hp Cover Circumference: 1.65m/ 5.41ft Cover Height: 1.37m/ 4.49ft Package Size: 20*20*5cm/ 7.87*7.87*1.97in Net Weight: 0.4kg/ 0.882lbs Gross Weight: 0.45kg/ 0.992lbs Package Included 1* Outboard Motor Cover 1* Storage Bag Notes Please Carefully Check the Size of the Motor Cover Before Purchasing. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3 Cm Error Due to Manual Measurement, and Make Sure You Do Not Mind Before Ordering.
- Two Layers Anti-static ESD Floor Mat Grounding Mats For Phone Electronics Repair - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Lot of 2 Ecci For Bachi 040-670-52 Automatic Winding Machines T16985 - You are buying 1 lot of 2 Winding Machines, for spare parts or repair. Racks, Mounts, & Patch Panels. You are buying a lot of2 units per order. Product Information. Warranty Information. For parts or repair- This item is being sold as is, as pictured.
- Bachi 110 Winding Machine T13155 - Tool & Machine Components. Reference Number. For parts or repair- This item is being sold as is, as pictured. Warranty Information. Product Information. STEP MOTORS. Electric/Motors/Breakers/Power. Racks, Mounts, & Patch Panels.
- Lot of 15 Bachi 160/ Magtrol HB-120-2 Guide Feeder motor brake/clutch - They were removed from a Bachi 160 machine. Racks, Mounts, & Patch Panels. Tool & Machine Components. STEP MOTORS. For parts or repair- This item is being sold as is, as pictured. You are buying a-lot of 15 units.
- *EURO* Stage Junk Ultimate Ratcheting Focus Tool AND Ratcheting 3/8" Adapter - It still works perfectly, including the lamp tester.
- Klein Tools 5189 Tradesman Pro™ Hard Case Large - Klein Tools 5189 Tradesman Pro™ Hard Case Large.
- BRAND NEW GREENLEE #830 HOLESAW KIT (1/2" to 2" Conduit)
- Harris Dracon D814 Impact Tool Punch Down Wire Made in USA - Harris Dracon D814 Impact Tool Punch Down Wire Made in USA. Shipped usps first class mail.
- Wiss 175E + Klein 2100 Electrical Scissors - Lot Of 5 - LISTED ARE THREE PAIR OF WISS AND TWO PAIR OF KLEIN SNIPS PLUS TWO LEATHER CARRY SHEATHS. TWO OF THE SETS ARE IN EXCELLENT CONDITION. TWO MORE PAIR ARE IN GOOD CONDITION AND SHOW MODERATE WEAR. THE LAST SET IS IN FAIR CONDITION AND SHOWS A LOT OF WEAR.
- Benner Nawman UP-B36 Telephone Cable Drop Slitter Tool #F27 - Photographs – Photographs are taken in bright lighting and as clear as possible to try to show the item’s condition.
- Wiss Electrician's Scissors 175E-5B with Leather Sheath Holder #F27 - We will do our best to resolve your concerns. Photographs – Photographs are taken in bright lighting and as clear as possible to try to show the item’s condition.
- Klein Tools Electrician's Scissors 2100-7 with Leather Sheath Holder #F27 - We will do our best to resolve your concerns. Photographs – Photographs are taken in bright lighting and as clear as possible to try to show the item’s condition.
- IDEAL VOL-CON XL Voltage/Continuity Tester 61-086 NEW
- Teledyne Interconnect Devices STRIPALL Thermal Wire Stripper TW-1 w/ Free Ship - Included only is the pictured stripper. The Strip All is in good condition with normal signs of usage.
- Bussman BP/FRN-R-60 60 Amp 250 Volt Time Delay Cartridge Fuses 2 Count - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Buckingham 574L Linemen Staple Stick - Item model number 574L. Holds 10 staples. Slots are 1/8″ W x 1″ L. Color Green. Number of Fasteners 10. We do not accept P.O. Boxes. We're happy to help. Country of Origin USA.
- Schleuniger 8400 style Replacement blades, 1 set of 4 pieces - New set of blades for Schleuniger 8400 ,set of 4.
- SEYMOUR MIDWEST LINK 64128GRA Hammer Handle,1 Wood,2 Steel Wedges - SEYMOUR MIDWEST LINK 64128GRA. Power adapters and other modifications may be necessary for proper operation in other countries. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- 1PCS USB Hand Crank Charger Generator Manual Dynamo Mobile Emergency Charge
- Practical 24V/Flat/Yellow DC 12V/24V DIY Liquid Stripping Damaged Helicoil
- DC 12V 24V Dosing Pump Peristal With Connection DIY Liquid Power - - Durchflussrichtung des Mediums: Die Durchflussrichtung der Peristaltikpumpe hängt von den positiven und negativen Stufen der Stromversorgung ab, und die positiven und negativen Stufen können for die Anschlüsse beliebig gewählt werden. Es dauert ungefähr 7-15 Werktage nach Kanada; ungefähr 10-30 arbeitstage zu anderen ländern. Die Transitzeit kann sich aufgrund des schlechten Wetters und der Zollkontrolle etwas verzögern. Wenn Sie Ihren Artikel nicht innerhalb von 30 Werktagen nach Abschluss der Zahlung erhalten, kontaktieren Sie uns bitte umgehend for weitere Unterstützung. Wir streben for 100% Kundenzufriedenheit! Positives Feedback ist uns sehr wichtig. Wenn Sie Fragen haben, können Sie uns gerne über "Frage an den Verkäufer" kontaktieren. Wir werden Ihre E-Mail innerhalb von 24 Arbeit.
- Rothenberger Collins E-Z Cutter Wheel 3.875" OD x 1.848" ID x .187" Thick - Rothenberger Collins E-Z Cutter Wheel 3.875" OD x 1.848" ID x. 187" Thick w/ Bushing. The product image is the actual item you will receive including all contents unless otherwise noted. We are not an authorized dealer of this product.
- Practical 24V/Flat/Yellow DC 12V/24V DIY Liquid Stripping Damaged Helicoil
- DC 12V 24V Metering Pump Peristaltic Pump with Connector DIY Liquid Power Tools
- Practical 24V/Flat/Yellow DC 12V/24V DIY Liquid Stripping Damaged Helicoil
- Practical 24V/Flat/Yellow DC 12V/24V DIY Liquid Stripping Damaged Helicoil
- Cable Stripper Blade Electric Copper Wire Stripping Machine Alloy HXSMS-25/26 - ★The stripping blade is made of high-quality alloy, with an outer diameter of 65 mm, an inner diameter of 26 mm, and a thickness of 15 mm. Compared with ordinary steel blades, it has higher hardness and longer service life. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness. It is processed with advanced precision grinder processing equipment to ensure its accuracy. ★The blade of the cable stripper becomes hard, so it can keep sharp for a long time. It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. ★Enhanced trimming and high temperature quenching can effectively reduce the loss of the blade and extend the service life. The peeling is fast, smooth and without burrs.
- MAKITA Chisel groove cutting cutter Blade 6mm, 9mm set
- No Clean Solder Pens Soldering Pen Computer Home Repairs 2.5mm 3.0mm 3.5mm - High-Quality Material: Our solder wick is made of quality copper wire and precise weaving technology, enhancing tension on the surface to absorb excess solder. The solder remover wick features good thermal conductivity and absorption, reducing the risk of thermal injury to circuit boards.
- DC 12V 24V Metering Pump Peristaltic Pump with Connector DIY Liquid Power Tools
- Burndy-BURNDYWeld 10048480 B-2566 Exothermic Grounding Mold (Open Box) - Burndy-BURNDYWeld 10048480 B-2566 Exothermic Grounding Mold (Open Box) Burndy-BURNDYWeld 10048480 B-2566 Exothermic Grounding Mold, 4/0 STR to 3/4" Ground, New-Open Box-Item/Box May Show Signs of Wear From Storage-See Pictures.
- Cable Stripper Blade Replacement Blade Cutter for Copper Wire Stripping Machine - Product description: ★The stripping blade is made of high-quality alloy, with an outer diameter of 49.5 mm, an inner diameter of 28 mm, and a thickness of 15 mm. Compared with ordinary steel blades, it has higher hardness and longer service life. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness. It is processed with advanced precision grinder processing equipment to ensure its accuracy. ★The blade of the cable stripper becomes hard, so it can keep sharp for a long time. It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. ★Enhanced trimming and high temperature quenching can effectively reduce the loss of the blade and extend the service life. The peeling is fast, smooth.
- OLD Vintage BONNEY RF23 1/4" Refrigeration Ratchet Wrench USA UNIQUE VERSION RF - Made in USA.
- 2mm Anti-Static Grounding Mat ESD Table Rubber Matting Roll Workbench Mat - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Cementex Water Pump Pliers Cam Action 12" P12WP-CA - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
- Lot Of 6 S66M1-50 Siemon Type 66 50 Pair Telco Punch Block - THIS SALE IS FOR.
- Professional Equipment 4106732 Water Pressure Gauge,Freeze Proof - Professional Equipment 4106732 Water Pressure Gauge,Freeze Proof.
- New HOZAN / CRIMPERS / CRIMPING TOOLS / P-732 / free shipping
- Professional Metri-Pack 150/280 Sealed Crimper (12155975) and Pick (12094429) - Crimp Tool #12155975 (made in the USA). The crimping tool is designed to crimp the core & insulation wings in a separate motion. Set includes crimp tool and pick.
- Metri-Pack Crimping Tool #12155975 (1 per pack) - Made in the USA. 20-14 Gauge.
- Greenlee 1-1/2" and 2" Counduit Knockout Set *USED* 500-4063, 500-4062, 500-6978 - The item available here is a used lot of two Greenlee knockout sets. Part No: 2" set: 500-4063 and 500-4062.
- Engineer Cord pliers Electric pliers Bare terminals PA-01 - We do our best for you!! [ Multiple sizes and colors ].
- Brand New handheld Magnet wire Stripping Machine 220V/110V USG T - Weight 0.5KG.
- LX-70(25-70MM2) Ratchet Terminal Crimping Tool For Wire Ferrules And End Slee em - The components of the ratchet crimping tools are made of special steel. Range of Application: For wire Ferrules, End Sleeves. Due to best handle grasping position,light and compact structure and handle design ensure perfect crimping effect.
- Handheld Magnet Wire Stripping Machine / Stripper Cutter 110V fast shipping - Pro DF-8 handheld Magnet wire Stripping Machine / stripper Cutter 110V. Output Speed. Your satis faction is our ultimate goal. 0.3 ~ 2.5mm.
- ESD Anti-static Mat Soldering Mat Rubber Grounding Mat Electronics Working Mat - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Manual Wire Stripping Cable Machine Scrap Stripper Metal Recycle Tool Black - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Sperry Volt Check Voltage and Continuity Tester VC61000 - NEW SEALED - Sperry Volt Check Voltage and Continuity Tester VC61000 - used but excellent condition, new batteries and tested.
- Engineer Code Pliers Electric Pliers Bare Insulated Open Barrel Terminal Japan - Multi-functional crimping pliers that can be used in all fields of crimping work. ● Multi-functional crimping pliers that compactly summarize various functions required for precision wiring work. Cuts will scatter, so make sure there are no people or fragile objects around you before starting work.
- 1/2" Dr, Ratcheting Breaker Bar, 24" 12024 Titan 12024 0 - 1/2" Dr, Ratcheting Breaker Bar, 24" 1/2 drive ratchet head swivels 180_. Heavy duty chrome vanadium steel construction. Maximum torque: 376 ft/lbs. (52 kg/m). 3-way ratcheting action: right-hand thread, left-hand thread or lock. Chrome plated bar and black oxide finish on head to resist corrosion 12024.
- Dispenser Spool Coil Reel Wire Electrical Untangle Romex Spinner - Max weight: 50 lbs. With arms; 100 lbs. Includes 2-brackets to mount to floor or stud. Convenient carry handles now included.
- HOZAN Crimping tool Crimping pliers Stripper、 built-in cutter P-722 Japan - Built-in wire stripper and cutter. Don't Miss This Chance!
- Cooper Bussmann BP-FP-2 Cartridge Carded Fuse Puller by Cooper Bussmann - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Side Mount to Positive Standard Top Post Adapter (1 per pack) - 3/8"-16 thread. Negative and positive clearly marked on adapter. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Cooper Bussmann BP-FP-2 Cartridge Carded Fuse Puller - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- TZ-225N Ergo-Grip Tweezer (Super Fine Tip Straight) 120.5mm - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Durable 24V/Flat/Yellow Metering Pump DIY Liquid Damaged Engine M6 X 8mm
- Seekonk Calibrated SMA Connector Torque Driver Set MC-200 MC-10
- AW SPERRY INSTRUMENTS GST-70M Wire Stripper,20 to 8 AWG - Wire Stripper,20 to 8 AWG. Grainger reserves the right to accept or reject any order. Power adapters and other modifications may be necessary for proper operation in other countries. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- MONARCH ROLS-P Rols-p Sensor With Phone Plug - MONARCH ROLS-P. ROLS-W Sensor, 1-250,000 RPM, Laser Sighted, Max. Sensing Distance 25 ft, Temp. Range -10 to 176 F, Material Stainless Steel, Length (In.). 3.12 in, Width (In.). 0.71 in, Height (In.).
- GRAINGER APPROVED V683Y Splice Connector, U-Shape,Steel - GRAINGER APPROVED V683Y. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAK7. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V500 3/8Y Washer,Steel,Overall W 1 5/8in,PK25 - Washer,Steel,Overall W 1 5/8in,PK25. GRAINGER APPROVED V500 3/8Y. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAK8. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- High Quality 24V/Flat/Yellow Metering Pump DIY Liquid M6 X 8mm Engine Helicoil
- GoGreen Power 6 Outlet Swivel Wall Tap, White White - The GoGreen Power Swivel Wall Tap features 6 outlets conveniently designed to fit behind furniture and appliances. Excellent for use as a charging station, and perfect for use with larger electronics such as computers, printers, smartphones, tablets & theater systems. Look no further than the 6 outlet wall tap adapter for all your home electrical needs! It's unique swivelling design can quickly turn two outlets into six outlets, of which three outlets swivel, and other three outlets are stationary. Each outlet fits a three pronged, polarized plug securely. The wall tap power adapter is rated at 1875 watts and can be used with polarized plugs. Look no further than the 6 outlet wall adapter for all your home electrical needs! Our wall tap unit is extremely versatile, and can be plugged into.
- Klein Tools 56383 Multi-Groove Fiberglass Fish Tape with Nylon Tip, 100-Foot - Klein Tools 56383 Multi-Groove Fiberglass Fish Tape with Nylon Tip, 100-Foot. Free shipping. No shipping to PR or Guam VI AS
- Handheld Magnet Wire Stripping Machine / Stripper Cutter 110V fast shipping NEW - Pro DF-8 handheld Magnet wire Stripping Machine / stripper Cutter 110V. Output Speed. Your satis faction is our ultimate goal. length 5 ~ 50mm. 0.3 ~ 2.5mm.
- Knife for Automatic Computer Wire Peeling Stripping Cutting Machine SWT508-SD/E - Material:White steel.
- Shrimp Ring Sleeve (E) For Mini Crimping Tool Use Range (X 1.6), Small, Medium - Japan Usage Item. [ Condition ]. We do our best for you!!
- (1) NEW Greenlee 0151-09D 9" High Leverage Side Cutting Lineman Pliers - Item removed from a new Greenlee 0159-27 Wiring Kit.
- (2) NEW Greenlee 0151-09D 9" High Leverage Side Cutting Lineman Pliers - Item removed from a new Greenlee 0159-27 Wiring Kit.
- 574L Linemen Staple Stick Light Green 574L Linemen Staple Stick Light Green - Holds 10 staples. Slots are 1/8″ W x 1″ L.
- Monarch 6241-011 Digital Stroboscope Kit,3400 Lux - Digital Stroboscope Kit. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
- Stripmeister Automatic Wire Stripping Machine ROMEX 2 Blades Copper Steel New - This wire stripper is your partner for practical and economical wire recycling. Our drill-powered wire stripper is constructed from solid aircraft-grade aluminum alloy, with the drive shaft crafted from heavy-duty steel.
- Stripmeister Automatic Wire Stripping Machine ROMEX 2 Blades Copper Steel New - This wire stripper is your partner for practical and economical wire recycling. Our drill-powered wire stripper is constructed from solid aircraft-grade aluminum alloy, with the drive shaft crafted from heavy-duty steel.
- Multi-Purpose Electrician golden Scissors 9 inch Cutting Stripping Wires - Rugged and durable: Our electrician's scissors are forged from high-quality thick stainless steel, with fine serrated high-carbon stainless steel blades, high hardness, strong wear resistance and long service life.
- Parallel Connection, #2 Solid to 2 Solid - ULTRAWELD standard mold for parallel connection of 2 solid to 2 solid ground wire. Requires MH-1 handle clamp and UMW65 weld metal. .
- Harris Dracon Division HD 8762/D-814/66 Blade Punch Down Wire Impact Tool - Harris Dracon Division HD 8762/D-814/66 Blade Punch Down Wire Impact Tool.
- Deutsch DTM Series Kit - Kit includes: 39A12001 20 Ga. Pin DTM Series #0460-202-20141 25 EA 39A12002 20 Ga. Socket DTM Series #0462-201-20141 25 EA 39A12027 18-16 Ga. Pin DTM Series #0460-010-20141 25 EA 39A12028 18-16 Ga.
- No Clean Soldering Pen and Solder Braided Tape Set for Electronics Welding
- Cadweld Erico Exolon Battery Pack XLB971A1 For Cadweld Mold Electric Welding - Cadweld Erico Exolon XLB971A1 Battery Pack For CADWELD MOLD ELECTRIC WELDING. Appears in really good condition. I have no way to test. Comes with charging instructions. Thank you for your interest.
- Vintage Wiss Electrician Scissors USA Made 5.25” Model 175E5 Wire Cutting Steel - Vintage Wiss Electrician Scissors USA Made 5.25” Model 175E5 Wire Cutting Steel.
- Harris Dracon Division HD 8762/D-814/66 Blade Punch Down Wire Impact Tool - Harris Dracon Division HD 8762/D-814/66 Blade Punch Down Wire Impact Tool. Comes only with what is shown
- KLEIN TOOLS VDV427-300 Punch Down Tool,110/66,Manual - KLEIN TOOLS VDV427-300. Punch Down Tool,110/66,Manual. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
- Southwire Tools THEX6-1/2 1/2" Hexagonal T-Handle With 6" Shank Forged Steel - Southwire Tools THEX6-1/2 1/2" Hexagonal T-Handle With 6" Shank Forged Steel. Unopened
- Parallel Connection, 4/0 Strand to #2 Solid - ULTRAWELD standard mold for parallel connection of 4/0 strand to 2 solid ground wire. Requires MH-1 handle clamp and UMW150 weld metal. .
- 7.1-8.5 GHz Waveguide EW77 - ANDREW 7.125-8.500 GHz (EW77) elliptical wave guide, standard jacket. **Use sku 485745 if ordering cable w/out attached connectors. .
- MAKITA Chisel Three-sided finish groove cutting cutter Blade width 21 mm New
- Rack-A-Tiers Nut Blaster - Universal Wire Connector Drill Bit XXL (72102) - Nut Blaster - XXL Blue.
- Commercial Electric Wire Cutter Ignition Terminals Green Black - Commercial Electric Wire Cutter Ignition Terminals Green Black.
- GRAINGER APPROVED V329-45Y Angle Connector - Open & Closed,Steel - GRAINGER APPROVED V329-45Y. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAE7. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- MONARCH CC-7 Latching Carrying Case - Latching Carrying Case. Latching Carrying Case, For Use With 1UFK8, 1UFK9, 1ULF1, 1ULF2. MONARCH CC-7. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Ratchet Crimping Tool HT-301A F BNC TNC N TEFLON THINNET PVC FIBER OPTIC CONN. - HEX HT-301A RATCHET CRIMPING TOOL F BNC TNC TEFLON THINNET PVC FIBER OPTIC CONNECTORS. I do my best to describe and picture its condition.
- B&K Precision 1623A Single Output DC Power Supplies, Digital Display, 60V, 1.5A - Condition is Used.
- Cable Pro/Digicon Linear Compliant Connector Assembler Tool LCCT-1 FREE SHIPPING - Cable Pro/Digicon Linear Compliant Connector Assembler Tool LCCT-1 FREE SHIPPING. See pictures.
- Enameled Wire Electric Paint Squeegee Hand-Held Paint Scraper 0.3-3.0MM DF-8 - Line length: 3-50MM. Model: DF-8.
- Harris Dracon Division HD 8762/D-814 Punch Down Wire Impact Tool - Used with signs of use. Good working condition.
- GRAINGER APPROVED 07-32 Cylindrical Lock/Key Set - Grainger reserves the right to accept or reject any order. GRAINGER APPROVED 07-32. Grainger Part #:34RR40. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- THOMAS & BETTS MD8F-1 MotorLeadDisconnect,Red,Female,Copper - MotorLeadDisconnect,Red,Female,Copper. THOMAS & BETTS MD8F-1. These motor pigtail connectors feature tin-plated copper construction. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- Gardner Bender GFI-3501 Ground Fault Receptacle Tester & Circuit Analyzer, - The Ground Fault Receptacle Tester and Circuit Analyzer tests ground fault receptacles by overloading circuit and tripping the GFCI. From the Manufacturer Tests ground fault receptacles by overloading circuit and tripping GFCI.
- 3pc Lot Vintage AC DC Volt Tester Vaco Waxman Eagle - About when you will get your item.
- 3F Pneumatic Peeling Machine Flat Ribbon Cable Wire Stripping Peeling Machine - Special structure of speed, all kinds of wire can be stripped and a half, full stripping, adjust easily. Pole design, tangent peeling a shape, remove the cutter can be used single-handedly. XC-3F Vertical Peeling Machine.
- Fluke 80pk-10 Pipe Clamp Thermocouple, Excellent Condition - This item is in excellent pre-owned condition. May show light signs of use or wear.
- Fiberglass Cloth Tape | 6 oz | 2"e; Wide by 50 Yards - 6 oz per square yard, 2” wide x 150 feet long (50 yards). Great for electronics, waterproofing, insulation, heat resistance, fire resistance, anti-rustNo adhesive backing, selvage edge to prevent unraveling.
- Weber & Scher Winding Machine - Tool & Machine Components. Unit is sold as is, for parts or repair. Reference Number. For parts or repair- This item is being sold as is, as pictured. Warranty Information. Product Information. STEP MOTORS.
- Davis-Standard PA-16 Dual Reel Clipper Takeups Wire/Cable Winding Machine - Semiconductor & PCB Equip. Tool & Machine Components. STEP MOTORS. Unit being sold for parts, as is. Reference Number. For parts or repair- This item is being sold as is, as pictured. Warranty Information.
- Webscher/Weber & Scher Winding Machine T180781 - Tool & Machine Components. Unit being sold as is, for parts or repair. Reference Number. For parts or repair- This item is being sold as is, as pictured. Warranty Information. Product Information. STEP MOTORS.
- Hydra Tension Inc TPL-45SK Wheel Tensioner W/ Hydraulic Pressure Braking - Front reel misaligned with support bent. Missing Hydraulic Pump. STEP MOTORS. Power Supplies. For parts or repair- This item is being sold as is, as pictured. Electric/Motors/Breakers/Power. Tool & Machine Components.
- Cooper Power Systems #404 2500 lb. Aluminum Snatch Block Pulley - Cooper Power Systems #404 2500 lb. Aluminum Snatch Block Pulley.
- Car motorcycle hand siphon siphon pumps oil gasoline fuel liquid suction K7W9 - Kann zum Entfernen von Wasser aus verstopften Waschbecken, Wasserbetten, kaputten Waschmaschinen, Booten und Poolabdeckungen verwendet werden. Übertragen Sie den schnell und sicher aus dem Kerosinbehälter in die Heizung.
- Buckingham 574L Linemen Staple Stick - Item model number 574L. Holds 10 staples. Slots are 1/8″ W x 1″ L. Color Light Green. Number of Fasteners 10.
- Maruto Hasegawa Kosakusho KEIBA Wire Stripper for Coaxial Cable WS-008 - Maruto Hasegawa Kosakusho. Corresponding wire: S-5C-FB. Head thickness: 19mm. the manufacturer will change contents, date and quantity for sale. For work without noise trouble and speeding up TV installation.
- Black Wire and Cable Stripping Machine Scrap Stripper Free Assembly Fixture - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Two Layers ESD Floor Mat Grounding Mats Anti-static For Phone Electronics Repair - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- B&K Precision 1623A Single Output DC Power Supplies Digital Display - B&K Precision 1623A Single Output DC Power Supplies, Digital Display, 60V, 1.5A. Condition is for parts or repair. Comes as pictured. Not powering on. Missing switch. Shipped with Standard Shipping.
- Greenlee Fish Finder Vision System (FF100) - CAT IV Rated inspection camera - Used and works perfectly It does have some scratches and normal wear from useThe hard case has scratches and is dirty The inspection camera orange cable is CAT rated
- Rubber Mat Electronic Components Ground Zero Protection ESD Anti-Static 2mm - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Cylinder Ram Head for TEMCo TH0037 Hydraulic Knockout Punch Driver - TEMCo ID: SP0010. "I have always been delighted with the service from TEMCo. About TEMCo. Or if you just changed your mind. Calculated by location. Lower 48 States: FREE! | Local Pickup Available: FREE!
- RATCH CUT RC1125-7C Replacement Tube Cutter Wheels For RC1125 - NEW IN BOX - RATCH CUT RC1125-7C Replacement Tube Cutter Wheels For RC1125 2 Wheels per Pack
- Gardner Bender Sperry 36 In. Continuity Tester CT6101 Gardner Bender CT6101 - Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. The Continuity Tester is very easy to use and is used to test for breaks in non-energized wires or cords. Continuity has a bright 360 visual indicator located near the tip along with a flexible lead for ease of use. Probe Length: .Handle Length: .
- Gardner Bender Sperry Scan-Test 5-in-1 Multimeter PD6902 Gardner Bender Sperry - Locate studs, metal or AC voltage behind the wall before cutting or nailing. Whether searching for studs or simply installing bracing, knowing what lies beneath the surface can ensure a safe work environment. The Scan-Test integrates multiple technologies into one easy to use tool. Scan the wall to find either wood or metal studs for secure installations, while avoiding metal pipes or other metal objects behind the wall. Cuts or nicks in the insulation of wiring can cause long-term problems in electrical systems and even cause unsafe working conditions, so avoid nailing to a live wire behind the wall by scanning for AC voltage with Circuit Alert technology. Correctly wired receptacles are a must, and this 5-in-1 multi-scanner includes an integrated outlet tester with GFCI test.
- Gardner Bender 80V to 140V Circuit Breaker Finder CS550A Gardner Bender CS550A - Locates AC circuits quickly and easily. Simply plug the transmitter into a wall outlet on the circuit you are trying to locate, then run the receiver over the circuit breakers or fuses in your load center. Receiver will beep and flash when the correct circuit is located. No need to interrupt power. Does not interfere with sensitive electronic equipment. Receiver uses one 9-volt battery (not included). UL (Underwriter's Laboratories) listed. Voltage: 80V to 140V .Battery Type: 9V .Batteries Included: No .
- Heritage Cutlery 100C Electrician Scissors USA - In good condition - blade needs cleaned and sharpened.
- 20050 Ergonomic Super 4 Plus Automatic Wire Stripper for Wires from 0.... - Jokari 20050 Ergonomic Super 4 Plus Automatic Wire Stripper for Wires from 0.2mm-6mm, 16.5cm L x 14cm W x 2.7cm H. Adjustable length stopper and a plier handle design with lockable grip. This tool is a quality Product made in Germany by JOKARI.
- Cementex BEW-10 Insulated Box End Wrench, 5/16" - Cementex BEW-10 Insulated Box End Wrench, 5/16". Used like new
- Cablemate Baseboard Cord Organizer CMK90 Wiremold Legrand (White) - Cablemate Baseboard Cord Organizer CMK90 Wiremold Legrand (White). Brand new.Free shipping.30 day warranty for return of unopened item only.
- Cementex Open End Wrench Set of 10- 1000V Electrician Tools - 3/8 - 1 1/16 read
- Cementex Insulated tool Ratchet with Ratchet Extension & Sockets...pls read
- OK Industries Wire Wrapping Tool BW-928-BF no tips TOOL ONLY - OK Industries Wire Wrapping Tool BW-928-BF no tips TOOL ONLY.
- Spool Dispenser Coil Wire Electrical Spinner Reel Unroller Floor or Stud Mount - Smoothly dispenses coils of armored cable or NM-B cable. Includes 2 brackets to mount to floor or stud. Convenient carry handle now included. WIRESMART CABLE DISPENSER. Includes 2-brackets to mount to floor or stud.
- 51Pcs Sandpaper Grinding Head Sandpaper Roll Metal Derusting Polishing RouV7 - 51 x Sandpaper ring. It can be used for jade carving machine, grinding mill, hanging mill. Type: Abrasive Disc.
- Gardner Bender GFI-3501 Ground Fault outlet Receptacle Tester & Circuit Analyzer - Ground Fault Receptacle Tester & Circuit Analyzer tests ground fault receptacles by overloading circuit and tripping GFCI. Tests standard outlets, GFCI outlets, and extension cords. Simply plug tester into any circuit protected by a ground fault receptacle (110 - 125 V AC) and press black button to overload circuit.Tests for seven conditions: ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse, and correct wiring.
- Stripmeister Automatic Wire Stripping Machine ROMEX 2 Blades Copper Steel New - This wire stripper is your partner for practical and economical wire recycling. Our drill-powered wire stripper is constructed from solid aircraft-grade aluminum alloy, with the drive shaft crafted from heavy-duty steel.
- Ratch-Cut - RC11257C Spare Wheels for RC1125 Series, Set of 2, RC1125-7C - We want you to be totally satisfied with your order. Product Type: Tools.
- 1* 5.5V USB Hand Crank-Charger Generator Manual Dynamo Mobile Charge
- Portable Manual Wire Stripping Machine 1-20mm Scrap Cable Wire Stripper NEW - This product is a wire stripping machine in portable size, which is pretty suitable for home or industrial use. Features: Applicable to 1-20mm dameter wire. Small and compact, easy to use and carry. Sturdy and practical, free to disassemble, free assembly. Can be operated by one person or two person to improve stripping efficiency and output. Portable size, which is pretty suitable for home or industrial use. Fine quality, safe and convenient to operate. Specifications: Material: steel Color: black Stripping range: 1-20mm / 0.04-0.79in Machine total height: 120mm / 4.7in Machine total width: 160mm / 6.3in Steel cutter length: 100mm / 3.9in Machine weight: 1381g / 3.0lb Steel cutter weight: 19g / 0.7ounce Package size: 170 * 145 * 60mm / 6.7 * 5.7 * 2.4in Package weight: 1479g / 3.3lb.
- Electronic Components Ground Zero Protection ESD Anti-Static Mat Floor Protect - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- GRAINGER APPROVED V349EG Cross Plates,Steel - GRAINGER APPROVED V349EG. Grainger reserves the right to accept or reject any order. Grainger Part #:5YE35. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- DWYER A3001 Pressure Gauge,0 to 1 In H2O - DWYER A3001. Pressure Gauge,0 to 1 In H2O. Range 20 Degrees to 120 Degrees F. Power adapters and other modifications may be necessary for proper operation in other countries. Grainger reserves the right to accept or reject any order.
- 1PCS USB Hand Crank Charger Generator Manual Dynamo Mobile Emergency Charge
- Knipex Tools 12 40 200 Self Adjusting Insulation Wire Stripper 8" 32 to 7 AWG - Knipex Self Adjusting Insulation Wire Stripper 8" 32 to 7 AWG. With wire cutter for copper and aluminium wires, multiple stranded up to 7 AWG (10 mm²) and single stranded up to 10 AWG (6 mm²). Blade: Spfor thin ribbon cables up to 7 AWG (10.0 mm) width in a single.
- Gardner Bender GRT-3500 Wall Outlet Receptacle Tester & Circuit Analyzer - Tests standard receptacles to ensure proper wiring. Neon indicators give positive indication of circuit status. Compact unit simply plugs into any standard 3-wire/grounded receptacle (110 - 125 V AC circuits).
- 13/32" Dia. Black Heavy Duty Adhesive-Lined Shrink Tubing, (4) 6" pcs, 2' total - 13/32" ID (before shrink) black heavy duty adhesive-lined shrink tubing. Made of polyolefin. Has 3 to 1 shrink ratio. Polyolefin is the standard-bearer in the shrink tubing market. It heats evenly, doesn't bubble or split, and is self-extinguishing.
- Cooper Wiring BP914 Circuit Tester Amber, 90 To 600 Volt - Cooper Wiring BP914 Circuit Tester Amber, 90 To 600 Volt. Highlights:For testing AC-DC electric circuitsDetects presence of power on either AC or DC circuitsIdentifies circuit conductorsRugged polycarbonate plastic constructionAmber
- VINTAGE -- WISS -- 175 E -- Electrician Scissors -- USA🇺🇸 - WISS -- 175 E -- Electrician Scissors. Made in USA🇺🇸. The pivot screw is adjustable.
- NEW General Tools Drive-Pin Punch 8-Pc Set + Vinyl Case 4"
- NEW General Tools Drive-Pin Punch 8-Pc Set + Vinyl Case 4" - We can help you find the right gear. Heat-treated tool steel with centerless-ground ends.
- 4-Way Pin Housings, DT Series #DT04-4P - (Pack of 5) - 4-way pin housings, Deutsch DT Series #DT04-4P. Works with DT Series. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. Product Details.
- LB-1421 - Stripmaster Lite No Blades - (Pack of 1) - IDEAL #LB-1421 - Stripmaster Lite No Blades. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Metri-Pack/Pack-Con Crimping Tool #12085271 (1 per pack) - Tool features five crimping zones (three for seals, two for core wings) and has a quick release. Made in the USA. 20-14 Gauge.
- Link Handles 64136 Axe Handle Wedges 1 Wood Wedge And 2 Steel Wedges Per Pack - Long lasting construction. All handles are carefully graded and sorted by log quality. Includes 1 wood and 2 steel. - If you receive an item and it doesn't work properly or you don't like it because of any reason at all.
- Pro DF-8 Handheld Magnet Wire Stripping Machine Stripper Cutter Scraper 110V USA - Output Speed. Your satis faction is our ultimate goal. 0.3 ~ 2.5mm.
- Greenlee 06-03-54B D'VersiBIT Type B Combination with Screw Point Bit, 3/8 by 54 - The D'VersiBIT System makes it possible to easily accomplish even complex installations. This patented system attaches a quality drill bit to a long flexible spring steel shaft. After drilling, attach a D'VersiGRIP to the hole in the drill and pull wire or cable back through the wall.
- Stripmeister Automatic Wire Stripping Machine ROMEX 2 Blades Copper Steel New - This wire stripper is your partner for practical and economical wire recycling. Our drill-powered wire stripper is constructed from solid aircraft-grade aluminum alloy, with the drive shaft crafted from heavy-duty steel.
- Outboard Motor Cover Full Outboard Engine 20-30 HP Cover, Black 600D Waterproof - Specification Color: Black Style: Modern Condition: New Material: 600D Oxford Cloth Vehicle Service Type: Boat Applicable Outboard Motor: 20-30HP Cover Circumference: 1.65m/ 5.41ft Cover Height: 1.37m/ 4.49ft Package Size: 20*20*5cm/ 7.87*7.87*1.97in Net Weight: 0.4kg/ 0.882lbs Gross Weight: 0.45kg/ 0.992lbs Package Included 1* Outboard Motor Cover 1* Storage Bag.
- Wide Müller wire stripper STRIPAX 9.01E + 09 from japan - Wide Müller wire stripper STRIPAX 9.01E 09. Applicable wire (mm [[square of]]): 0.08 to 6 (10). Cutting capacity: 0.08 to 6 (10) mm [square of []] (AWG 28 - 7). Stripping ability: 0.08 to 6 (10) mm [square of []] (AWG 28 - 7).
- KLEIN TOOLS 6-in-1 TAPPING TOOL, 627-20, USA - 6-in-1 TAPPING TOOL. KLEIN TOOLS. MADE IN USA. GOOD USED CONDITION!
- B&K 48 Inch Diameter Single Reel Industrial Uncoiler w/out motor - STEP MOTORS. No motor installed. For parts or repair- This item is being sold as is, as pictured. For parts or repair only. Mandrel in good condition. Signals & Source Generators. Radiation Testers.
- Vintage Klein 3 Ring Binder parts catalog  - Vintage Klein 3 Ring Binder parts catalog .
- NEW Manual Wire Cable Stripping Machine Peeling Machine Cable Wire Stripper - (Excluded.).
- Steel Manual Wire Stripping Machine Scrap Cable Stripper Copper Recycle Tool USA - This product is a wire stripping machine in portable size, which is pretty suitable for home or industrial use. Features: Applicable to 1-20mm dameter wire. Small and compact, easy to use and carry. Sturdy and practical, free to disassemble, free assembly. Can be operated by one person or two person to improve stripping efficiency and output. Portable size, which is pretty suitable for home or industrial use. Fine quality, safe and convenient to operate. Specifications: Material: steel Color: black Stripping range: 1-20mm / 0.04-0.79in Machine total height: 120mm / 4.7in Machine total width: 160mm / 6.3in Steel cutter length: 100mm / 3.9in Machine weight: 1381g / 3.0lb Steel cutter weight: 19g / 0.7ounce Package size: 170 * 145 * 60mm / 6.7 * 5.7 * 2.4in Package weight: 1479g / 3.3lb.
- New No Clean Soldering Pen & Solder Braided Tape Set For Electronics Welding Hot - High-Quality Material: Our solder wick is made of quality copper wire and precise weaving technology, enhancing tension on the surface to absorb excess solder. The solder remover wick features good thermal conductivity and absorption, reducing the risk of thermal injury to circuit boards.
- AMP 755331-1 Crimper for Mini-Universal MATE-N-LOK Pin and Socket Contacts - TE Connectivity AMP 755331-1.
- 2mm Anti-Slip Anti-static Rubber Pad ESD Table Mat High-Temperature Resistance - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- GRAINGER APPROVED 29YK70 OneHoleLugCmprsnConn,Short,Gold,45 - OneHoleLugCmprsnConn,Short,Gold,45. GRAINGER APPROVED 29YK70. Grainger Part #:29YK70. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- AMP 90066-7 ASSY SAHT, Hand Crimp Tool to crimp Type III, Type VI & MATE-N-LOK - TE Connectivity AMP 90066-7 ASSY SAHT. Manufacturer: AMP Tyco. This tool has small etched information.
- AMP 58342-1 Hand Crimp Tool Rectangular Contacts S.A.H.T. to crimp AMPMODU MTE - This tool has small etched information.
- Klein Tools 627-20 tapping driver 1/4"-20 , 12-24, 10-24 - Here we have a Klein Tools 627-20 tapping tool.
- 3M Super 88 Heavy Duty Black Electrical Tape, 3/4" X 66' (1 per pack) - 3M Super 88 Heavy Duty Black Electrical Tape, 3/4" X 66' Super 88 electrical tape is the heavy duty version of the classic Super 33 electrical tape. 66' length. Electrical Tape. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- BEAMNOVA Upgraded Replacement Blade for Copper Wire Stripping Machine Powered Ca - Made of High strength special alloy. Check the video at the picture column to see how to replace the blade. If the original blade size is smaller than BEAMNOVA'S, this blade may not be suitable for your machine.
- Sperry Volt Check Voltage and Continuity Tester VC61000 - NEW SEALED - Hammond Super Pawn. If there are. New sealed! always acceptable. Local pickup is.
- Smart Electrician® 5-1/2" Nickel-Plated Residential Cable Ripper - Tool pierces and splits wire jacket to verify gauge size. Our other warehouses is in HongKong, shanghai china.
- Sperry Instruments Commercial Line Splitter
- Trilithic 360 DSP Home Certification Meter **BROKEN SCREEN**
- No Clean Soldering Pen And Solder-Braided Tape Set For-Electronics-Welding
- Deutsch 24-20 Ga. Red Removal Tool #0411-240-2005 (1 per pack) - Deutsch 24-20 Ga. Works with DTM Series, DRC20 Series, HDP Series, and HD30 Series. Tool is made of plastic. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- CAL-HAWK ( CWSO7 ) Automatic Wire Stripper Crimping Tool delayed cut 6-1/2 In. - Super Handle grasping position to Ensure Perfect Crimping Effect. Just insert your wire, squeeze handles and you have a perfectly stripped wire! Great tool to keep handy in the tool box for around the house and garage uses!
- Vintage 8" Vaco USA Wire Stripper Crimper Cutter Bolt Cutter Model No. 1963
- WESTWARD TTLK001G Slot Lock/Key Set - WESTWARD TTLK001G. Slot Lock/Key Set. Grainger reserves the right to accept or reject any order. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Power adapters and other modifications may be necessary for proper operation in other countries.
- 30.5mm (1-7/32") Dia, Pushbutton TCT Tipped Hole Saw for Stainless or Mild Steel - (1) hex wrench for replacing pilot drill. Solid ½” solid integral shank with flats to prevent spinning in the drill chuck. Pilot drill starts and centers the hole. (1) pilot drill. Solid steel one piece design.
- 2-1/2" Diameter (2" Conduit) TCT Tipped Hole Saw for Stainless or Mild Steel - (1) hex wrench for replacing pilot drill. Solid ½” solid integral shank with flats to prevent spinning in the drill chuck. Pilot drill starts and centers the hole. (1) pilot drill.
- 2" Diameter (1-1/2" Conduit) TCT Tipped Hole Saw for Stainless or Mild Steel - (1) hex wrench for replacing pilot drill. Solid ½” solid integral shank with flats to prevent spinning in the drill chuck. Pilot drill starts and centers the hole. (1) pilot drill.
- 1-3/4" Diameter (1-1/4" Conduit) TCT Tipped Hole Saw for Stainless or Mild Steel - (1) hex wrench for replacing pilot drill. Solid ½” solid integral shank with flats to prevent spinning in the drill chuck. Pilot drill starts and centers the hole. (1) pilot drill.
- 1-3/8" Diameter (1" Conduit) TCT Tipped Hole Saw for Stainless or Mild Steel - (1) hex wrench for replacing pilot drill. Solid ½” solid integral shank with flats to prevent spinning in the drill chuck. Pilot drill starts and centers the hole. (1) pilot drill.
- 1-1/8" Diameter (3/4" Conduit) TCT Tipped Hole Saw for Stainless or Mild Steel - (1) hex wrench for replacing pilot drill. Solid ½” solid integral shank with flats to prevent spinning in the drill chuck. Pilot drill starts and centers the hole. (1) pilot drill.
- 7/8" Diameter (1/2" Conduit) TCT Tipped Hole Saw for Stainless or Mild Steel - (1) hex wrench for replacing pilot drill. Solid ½” solid integral shank with flats to prevent spinning in the drill chuck. Pilot drill starts and centers the hole. (1) pilot drill.
- 1pcs Manual Wire Cable Stripping Machine Peeling Machine Cable Wire Stripper - 1 Manual Wire Stripper. However, we will try our best to minimize it. Easy & Secure. 100% Money Back.
- Elenco E-T10 IC Puller - Manufacturer: Elenco. Stainless Steel Construction for Removing IC's Insulated Vinyl Grip. Color may vary. IC's Insulated Vinyl Grip. About the Manufacturer. Made in USA.
- 1-30mm Manual Copper Wire Stripping Machine Scrap Cable Peeling Stripper Fixture - 1 x Wire Stripping Machine. Can be operated by one person or two person to improve stripping efficiency and output. Can connect the hand drill to assist the incoming line, making stripping easier. Stripping range: 1-30mm / 0.04-1.18in.
- Manual Copper Wire Stripping Machine 1-30mm Scrap Cable Peeling Stripper Fixture - 1 x Wire Stripping Machine. Can be operated by one person or two person to improve stripping efficiency and output. Can connect the hand drill to assist the incoming line, making stripping easier. Stripping range: 1-30mm / 0.04-1.18in.
- 20050 Ergonomic Super 4 Plus Automatic Wire Stripper for Wires from 0.2mm-6mm... - Adjustable length stopper and a plier handle design with lockable grip. This tool is a quality Product made in Germany by. produce since more than 40 years specialist tools for a wide range of applications that allow simple, fast, and precise cable stripping.
- AMP 59528-1 Hand Crimp Tool designed to crimp the AMP FASTON terminals - This tool has small etched information.
- AMP 90202-2 * Hand Crimp Tool * GOOD CONDITION * - This tool has small etched information.
- Automatic Scrap Cable Stripper Electric Wire Stripping Machine Copper Recycling - Manual Wire Cable Stripping Peeling Machine Scrap Stripper for 1-20mm Wire USA. Can be operated by one person or two person to improve stripping efficiency and output. Stripping range: 1-20mm / 0.04-0.79in.
- Automatic Scrap Cable Stripper Electric Wire Stripping Machine Copper Recycling - Can Be Operated by One Person or Two Person to Improve Stripping Efficiency and Output. Stripping Range: 1-20mm / 0.04-0.79in. 1 Wire Stripping Machine. Stripping range1-20mm / 0.04-0.79in. Small and Compact, Easy to Use and Carry.
- Rubber Pad Desk Work Mat Phone Repair Soldering Heat Insulation ESD Anti-Static - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- WINTERS PFQ1274-DRY Pressure Gauge,4" Dial Size,Silver - WINTERS PFQ1274-DRY. Pressure Gauge,4" Dial Size,Silver. Grainger reserves the right to accept or reject any order. Power adapters and other modifications may be necessary for proper operation in other countries.
- 3/8" Dia. Red Adhesive-Lined Shrink Tubing - ((4) 6" pcs - 2 ft. total) - 3/8" ID (before shrink) red adhesive-lined shrink tubing. Made of polyolefin. Has 3 to 1 shrink ratio. Polyolefin is the standard-bearer in the shrink tubing market. It heats evenly, doesn't bubble or split, and is self-extinguishing.
- Klein Tools Bell Systems Specialty Pliers, D234-6 & 203-8 - SPECIALTY PLIERS. D234-6, CRIMPING PLIERS. 203-8, NEEDLE NOSE PLIERS. KLEIN TOOLS. BELL SYSTEMS.
- ALLOSUN Automotive Cable Wire Tracker Car Tracer Finder Test Short & Open DC 6~4 - You can also use it in checking for short circuit and exacting open circuit and so on. Diagnose and judge the break point from Slight Change of the continuous audio signal from receiver. Transmitter and receiver LEDs show open or short circuit conditions.
- Atrix Omega Plus HEPA Filter Cartridge -Model# OF612HE - The Atrix Omega Plus HEPA Filter Cartridge is designed for use with the Atrix Omega Plus HEPA Vacuum Item# 56948, sold separately. The cartridge is 99.97 efficient at 0.3 microns, providing very fine filtration. Can be used for lead paint, pest control, and more. Product Weight lbs. 1.75, Capacity gal. 1, Dimensions L x W x H in. 11.75 x 5.5 x 5.5 Packaged dimensions 112.5 x 6.5 x 6, Product Style Filter. Super fine filtration is 99.97 efficient at 0.3 microns Designed especially to fit the Atrix Omega Plus HEPA Vacuum Item# 56948, sold separately Quick and easy replacement.
- A.W. Sperry Earth Tester Model 4102, For Parts /Repair - S ale Includ es: A.W. Sperry Earth Tester Model 4102, For Parts /Repair. No exceptions. Sorry, no other parts or accessories included. Function: Sold AS-IS FOR PARTS/REPAIR.
- Starbar T100 Snap Ring Pliers - Starbar T100 Snap Ring Pliers USED. Used, some signs of wear Any questions please feel free to ask Thank you for looking
- Crimp Supply Metri-Pack and Weather-Pack Pick Set (12094429, 12094430) - Narrow width pick tapers to a 0.035" width. Wide width pick tapers to a 0.09" width.
- Crimp Supply Metri-Pack 150/280 Sealed Series Crimp Tool and Release Tool Set - This kit is designed for economic field service. The crimp tool is designed to crimp the core & insulation wings in a separate motion. For wire size 22-10.
- 1,000VAC Cementex TR-9BEK-CA-C Insulated 9 Piece Electricians Kit w/Robertsons - 7-1/2" Diagonal Cutting Pliers. Tested to 10,000 VAC and rated for 1,000 VAC when working on live parts. Comply with the IEC 900 standard.
- 3/4" Dia. Yellow Adhesive-Lined Shrink Tubing - (4 ft. piece) - 3/4" ID (before shrink) yellow adhesive-lined shrink tubing. Made of polyolefin. Has 3 to 1 shrink ratio. Polyolefin is the standard-bearer in the shrink tubing market. It heats evenly, doesn't bubble or split, and is self-extinguishing.
- 1/2" Dia. Red Heavy Duty Adhesive-Lined Shrink Tubing, (4) 6" pcs, 2 ft. total - 1/2" ID (before shrink) red heavy duty adhesive-lined shrink tubing. Made of polyolefin. Has 3 to 1 shrink ratio. Polyolefin is the standard-bearer in the shrink tubing market. It heats evenly, doesn't bubble or split, and is self-extinguishing.
- 3-Way Pin Housings, DT Series #DT04-3P - (Pack of 5) - 3-way pin housings, Deutsch DT Series #DT04-3P. Works with DT Series. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. Product Details.
- Lineman's Skinning Knife with Hook Blade and Notch 1EA - 1570-3LR Linemans Skinning Knife, Ergnomic Handle with Finger Grooves, 3in Fixed Hook Blade with Notch. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- 2T39656 - IDEAL T-5 T-Stripper Wire Stripper - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. Color - Black Features - Corrosion Resistant Manufacturer - IDEAL Industries, Inc Application/usage - Stripping Manufacturer_Part_Number - 45-120.
- 33-719 Telephone/Data Cable Splice Kit Crimp Ur/Uy/Ub Idc Splice Connector - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Ideal 35-922 Six in One Tap Tool - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Ideal(r) 33-719 Idc Kinetic(tm) Telephone/data Cable Splice Repair Kit - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- 33-719 Telephone/Data Cable Splice Repair Kit Consumer Electronics Accessories - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Ideal 45-163 Coaxial Stripper with 1/8 to 7/32-Inch Range - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- 33-719 IDC Kinetic(TM) Telephone/Data Cable Splice Repair Kit - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Cementex Double Insulated Socket 3/4 (IS38-14) - For sale today is a Cementex Double Insulated Socket size 3/4... 12 point...3/8" Drive... This item is used but in great condition.
- 451-00210 Bag Tire Balancing Beads 10 oz - For truck tires, trailer tires, mud tires, all terrain tires or any vehicles that present a minimum of 1/2 ton suspension. This product is not for use with motorcycles or passenger cars because the suspension is too soft.
- Jonard Tools S-340 DIP/IC Insulated Spring Steel Extractor Tool, 4" Length - This DIP/IC Extractor features the following INCLUDES: (1) Insulated Extractor Tool. SPECIAL DESIGN: Designed to extract internal components from DIP Sockets as well as LSI, MSI, and SSI Devices with 8-24 pins.
- GRAINGER APPROVED V300UEG Connector, U-Shape,Steel - GRAINGER APPROVED V300UEG. Grainger reserves the right to accept or reject any order. Grainger Part #:5YE15. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V344Y Corner Plates,Steel - GRAINGER APPROVED V344Y. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAK1. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- SUPERSTRUT B1400HS 20 Strut Channel,Steel,Overall L 20ft - SUPERSTRUT B1400HS 20. Strut Channel,Steel,Overall L 20ft. Strut Channel - Slotted, Slot Type Slotted, Size 1 5/8 in x 13/16 in, Slot Length 1 1/8 in, Slot Width 9/16 in, Overall Length 20 ft, Overall Height 13/16 in, Overall Width 1 5/8 in, Steel, Gauge 14 ga, Hole Size 9/16 in x 1 1/8 in, Hole Spacing 2 in Center to Center, Style Single, Channel Type Slotted, Slot Spacing 2 in, Silver, Finish Zinc-Plated, Weight 0.87 lb.
- GRAINGER APPROVED V120NEO 1-3/8Y Pipe Cushion Clamp,Steel,Overall L 8ft - GRAINGER APPROVED V120NEO 1-3/8Y. Grainger reserves the right to accept or reject any order. Grainger Part #:2HCG8. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Used LOBSTER CRIMPING PLIERS AK22A From Japan - It works properly.
- Automotive Cable Wire Tracker Car Tracer Finder Test Short & Open DC 6~42 Volts, - You can also use it in checking for short circuit and exacting open circuit and so on. Diagnose and judge the break point from Slight Change of the continuous audio signal from receiver. Transmitter and receiver LEDs show open or short circuit conditions.
- Bar Air Manometer 13mm 1/4 BSP Gewinde Double Scale für Luftkompressor ❤.ac Wa - Easy to read dial. Material: Plastic shell. 1 x Compressor Gauge. Colour: Black.
- ESD Anti-static Mat Soldering Mat Roll Rubber Grounding Electronics Working Mat - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Manual Wire Cable Stripping Machine Peeling Machine Cable Wire Stripper New
- Great Manual Wire Cable Stripping Off Machine Exfoliating Cable Wire Stripper - (Excluded.).
- NEW Manual Wire Cable Stripping Machine Peeling Machine Cable Wire Stripper - 1 Manual Wire Stripper. Scrive Knife:White steel knife.
- Manual Wire Stripping Machine Portable Scrap Cable Peeling Stripper Machine Tool - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- 2Pcs 110V Pro 10000 r/min Handheld Magnet Wire Stripping Stripper Cutter Machine - 2 x Handheld Magnet Wire Stripping Machines. Output Speed 0 ~ 10000 r / min. This item only supports 110V.
- PC Building Rubber Anti Static Mat, Green Grounding Roll ESD Floor Mat For Table - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Manual Wire Cable Stripping Peeling Machine Scrap Stripper Metal Recycle Tool - Product parameters: Package size: 6.00 x 15.00 x 6.00cm (2.36 * 5.91 * 2.36inch) Gross weight: 1.8kg (3.97lb) Applicable wire range: 1-32mm (10.03-1.26inch) Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc. features: 1. Using multiple turrets, multiple wires can be operated at the same time 2. The screw is fixed firmly and durable, easy to disassemble and assemble, and the whole machine is not easy to be scrapped 3. Not all wires will run automatically. The ones with small resistance and hard wire will do. 4. The frame is not loose and has high strength The shaft and side plate hole have no wear and long service life 5. Bearing capacity of body material: 3.5t Packing list: Stripping machine + blade * 3 + small wrench * 2 + screw accessorie.
- Handheld Magnet Wire Stripping Machine / Stripper Cutter 110V fast shipping - Pro DF-8 handheld Magnet wire Stripping Machine / stripper Cutter 110V. Output Speed. Your satis faction is our ultimate goal. 0.3 ~ 2.5mm.
- GMP General Machine Products Splicers Snips Electrician Scissors w Leather Pouch
- Anti-Static ESD Soldering Mat, Roll Rubber Grounding Mat Electronics Working Mat - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- ESD Anti Static Work Bench Desktop Mat/ Floor Rubber Mat Discharge Protection - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Vintage Wal Adjustable Wire Strippers Electrician Tool 595-GC-760 Used - We will do our best to work with you and to resolve this issue.
- Anti Static ESD Soldering Mat Roll Rubber Grounding Mat Electronics Working Mat - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Duct-O-Bar Electrification Systems Electrical Bus Tool With Tips - CLEAN! - Electrification Systems. Electrical Bus Tool.
- Anti-Static ESD Soldering Mat Roll Rubber Grounding Mat Electronics Working Mat - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- GRAINGER APPROVED V355EG Splice Flat Plates,Steel - GRAINGER APPROVED V355EG. Grainger reserves the right to accept or reject any order. Grainger Part #:5YE56. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Some Sort Of Clamp On Wire , String Or Thread Dispenser Reel - LOOK AT THE PICTURES. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION.
- No-Dog Offset Level (Gold) - No-Dog Offset Level (Gold).
- B-LINE 2-Hole 30 Degree Zinc Electroplated Open Angle 9/16" Hole Mounting B162 - B-Line #B162 2-hole 30 degree open angle fitting. Made of zinc electroplated steel for long lasting performance. Hot rolled pickled oiled process. Features 9/16" hole mounting and 7/32" thickness.
- Ratchet Crimp Tool for 8-2 Ga. Non-Insulated Connectors (1 per pack) - This is one of the few ratchet tools that crimp 8-2 gauge non-insulated connectors, compression lugs, and standard lugs. Weighs 1.5 lbs. and is 10.5" long. Made in the USA. Ratchet Crimp Tool for 8-2 Ga.
- BLACKBURN BTC3511 MechConn,Copper,13/32 in,Hex - BLACKBURN BTC3511. Power adapters and other modifications may be necessary for proper operation in other countries. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- 2 Pcs Ferrule Removal Tool Olive Puller Compression Sleeve Puller Olive Remover - 2 x Olive pullers. Material: solid brass.
- 574L Linemen Staple Stick Light Green - Holds 10 staples. Slots are 1/8″ W x 1″ L.
- Fanttik Cordless Screwdriver Kit 14Pcs, Digital Screen, Li-Ion 2000Mah, 6 Gears - Fanttik Cordless Screwdriver Kit. Regardless of electronics repair, bike assembly or furniture installation, hard work is made easy with this handy screwdriver. Durable & Safe: Every part is strictly selected to put together premium quality.
- Rubber ESD Anti-Static Soldering Mat 0.6×3m For Circuit Phone PC Tablet Repair - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Cable Stripper Blade Cut Replacement Tool For Wire Stripping Machine HXSMS-25! - Product description: ★The stripping blade is made of high-quality alloy, with an outer diameter of 49.5 mm, an inner diameter of 28 mm, and a thickness of 15 mm. Compared with ordinary steel blades, it has higher hardness and longer service life. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness. It is processed with advanced precision grinder processing equipment to ensure its accuracy. ★The blade of the cable stripper becomes hard, so it can keep sharp for a long time. It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. ★Enhanced trimming and high temperature quenching can effectively reduce the loss of the blade and extend the service life. The peeling is fast, smooth.
- GRAINGER APPROVED V346EG Tee Plates,Steel - GRAINGER APPROVED V346EG. Grainger reserves the right to accept or reject any order. Grainger Part #:5YE23. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GREENLEE 45058 Power Talk 2000 Telephone Line Communication New Warehouse Stock - GREENLEE 45058 Power Talk 2000 Telephone Line Communication New Warehouse Stock. Shipped with USPS Priority Mail.
- Woods Modular 2 Way Crimper Kit Phone Tools - Woods Modular 2 Way Crimper Kit Phone Tools. Package has been opened. Not used. Bought wrong item. PLEASE SEE PICTURES. Thank you
- Klein Tools 88906 Conduit Scoring Tool - Klein Tools 88906 Conduit Scoring Tool.
- Jonard ~ JIC-4366 ~ Optical Fiber Cable Sheath Stripper & Ring Tool ~ Blue - What you see in the photos is what exactly you receive. If it's not pictured it's not included.
- Pollak 54250PLP Tow Wiring 50 Amp Circuit Breaker - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Pollak (54250PLP) 50-Amp Circuit Breaker (4) - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- POLLAK (54250PLP 50-Amp Circuit Breaker - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- WESTWARD GGS_51211 Drawer Slides - WESTWARD GGS_51211. Drawer Slides, Closed Length 10 in, Compatible with Grainger Part Number 48RJ69, 48RJ70, 48RJ71, 48RJ72, Compatible with Manufacturer Model No. Drawer Slides. Power adapters and other modifications may be necessary for proper operation in other countries.
- Wheel Tire Balancing 14 Ounce Counteract Beads - Four Pack of Counteract 14 oz - Click here to see description.
- New Sioux Chief Combo 305-23CPK Crimping Tool for Pex & RB Crimp Rings - Combo does 3/4" & 1/2".
- B-Line Strut Fitting 3-Hole Zinc Plated Steel Support Angle 9/16" Diameter B105 - B-Line #B-105 strut fitting 3-hole zinc plated steel support angle. Z-Support is ideal for B22 channel applications. Features include Zinc plated steel. (SKU # BLB-105-EA; Weight: 0.5000 lbs.).
- B-Line Zinc-Plated Carbon Steel Finish 1/2" Rigid Strut Strap Pipe Clamp B2008 - B-Line #B2008 rigid strut strap pipe clamp. Made of zinc-plated carbon steel material for long lasting performance. Has a square nut, slotted hex head machine screw. Features include 1/2" nominal pipe size.
- Vintage 8" Vaco USA Wire Stripper Crimper Cutter Bolt Cutter Model No. 1963 - The tool opens and closes smoothly.
- Ok Industries Speed Wrap Wire Tool Manual Solderless - OK INDUSTRIES SPEED WRAP WIRE TOOL MANUAL SOLDERLESS.
- New 8 Piece TCT Tipped Hole Saw Electrical Conduit Kit - 8 Piece TCT Hole Saw Electrical Conduit Kit. Conduit Size.
- Sperry Instruments CS61200P Electrical 120V AC 60Hz Includes CS61200AS Light ... - When used with CS61200AS accessory kit, unit can trace switches, light fixtures, and other energized wiring. Trace circuits to detect appropriate breaker. Sperry makes the job of locating electrical circuits (AC circuits of 110-125 volts) quick and easy.
- GENSPEED W2133496E Data Cable,Cat 5e,24 AWG,1000ft,Blue - GENSPEED W2133496E. Data Cable,Cat 5e,24 AWG,1000ft,Blue. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
- Bar Air Pressure Gauge 13mm 1/4 BSP Thread Double Scale For Air Compressor_U`c - 1 x Compressor Gauge. Material: Iron Shell. - Easy to read dial. Colour: Black.
- 16t Hydraulic Busbar W/“6 inch Blade”Straight 0-90° Metal Material - This Hydraulic Busbar Cutter Is Made of High-quality Iron, Which Is Strong, Durable, and Not Easy to Deform. 1 Hydraulic Busbar Cutter. Quick Connector: The connector of this product is a threaded ZG3/8" quick connector with very tight construction.
- Hydraulic Busbar 16t W/6-inch Straight Blade 0-90° Bending Busbar - This Hydraulic Busbar Cutter Is Made of High-quality Iron, Which Is Strong, Durable, and Not Easy to Deform. 1 Hydraulic Busbar Cutter. Bending Object: Iron, Copper, Aluminum. Quick Connector: The connector of this product is a threaded ZG3/8" quick connector with very tight construction.
- Steel Manual Wire Stripping Machine Scrap Cable Stripper Copper Recycle Tool USA - This product is a wire stripping machine in portable size, which is pretty suitable for home or industrial use. Features: Applicable to 1-20mm dameter wire. Small and compact, easy to use and carry. Sturdy and practical, free to disassemble, free assembly. Can be operated by one person or two person to improve stripping efficiency and output. Portable size, which is pretty suitable for home or industrial use. Fine quality, safe and convenient to operate. Specifications: Material: steel Color: black Stripping range: 1-20mm / 0.04-0.79in Machine total height: 120mm / 4.7in Machine total width: 160mm / 6.3in Steel cutter length: 100mm / 3.9in Machine weight: 1381g / 3.0lb Steel cutter weight: 19g / 0.7ounce Package size: 170 * 145 * 60mm / 6.7 * 5.7 * 2.4in Package weight: 1479g / 3.3lb.
- UTICA Stub Nose Side Cutters. 5" Spring Loaded Flush Cut. Electronics Jewelry - UTICA Stub Nose Side Cutters. 5" Spring Loaded Flush Cut. Electronics Jewelry. No Issues. Strong Cutting. Smooth Operation. Solid Vintage Tool..
- ENGINEER SS-33 Pin Extractor Tool Housing Connector Pin Removal Tip: Φ0.1 inch - Japanese tool manufacturer Engineer.
- Heat Resistant Rubber Repair Table Grounding Roll ESD Mat For Workbench Floor - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- KNIPEX 16 30 135 SB Cable Stripper,1-9/64 In,7-1/2 In - KNIPEX 16 30 135 SB. Cable Stripper,1-9/64 In,7-1/2 In. Power adapters and other modifications may be necessary for proper operation in other countries. Grainger reserves the right to accept or reject any order.
- AT-A-GLANCE DG-Kit-ALN Level Indicator Repair Kit - Level Indicator Repair Kit. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Power adapters and other modifications may be necessary for proper operation in other countries.
- GRAINGER APPROVED V500 1/4SS Washer,304 SS,Overall W 1 5/8in,PK25 - Washer,304 SS,Overall W 1 5/8in,PK25. GRAINGER APPROVED V500 1/4SS. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAN7. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- TE CONNECTIVITY/AMP 69454 -F Hand Crimping tool PIDG 22-18 - TE CONNECTIVITY/AMP 69454 -F Hand Crimping tool PIDG 22-18. Condition is used. There are some MARKS on the item. Does not come with anything else. Please see the pictures for what you are getting. 2H.
- Gardner Bender LED Portable Work Light w/Bluetooth- 2200 Lumens 20W - This Gardner Bender LED Work Light delivers up to 2200 Lumens of brilliant LED illumination, plus features two built-in 3 watt Bluetooth speakers. , Bulb qty. 40, Power Supply Battery, Watts 20, Di.
- 451-00210 Bag Tire Balancing Beads 10 oz - For truck tires, trailer tires, mud tires, all terrain tires or any vehicles that present a minimum of 1/2 ton suspension. This product is not for use with motorcycles or passenger cars because the suspension is too soft.
- 451-00210 Bag Tire Balancing Beads 10 oz - For truck tires, trailer tires, mud tires, all terrain tires or any vehicles that present a minimum of 1/2 ton suspension. This product is not for use with motorcycles or passenger cars because the suspension is too soft.
- ESD Anti Static Heat Resistant Table Mat 16" x 24" Tech Repair & Soldering Grd B - 193709509353 - Anti static Antistatic ESD Ground Strap Wrist Band Grounding Bracelet Kit. 114462891776 - ESD Ground Socket Dual Banana Plug Anti Static Wrist Strap Band Grounding. 193715912119 - Desktop Anti StaticESD Mat Grounding Kit Snap, Wire, and Alligator Clip.
- Jokari 20050 Ergonomic Super 4 Plus Automatic Wire Stripper for Wires from 0.... - Original JOKARI quality Product made in Germany. Adjustable length stopper and a plier handle design with lockable grip.
- DT06-4S-P012 DT Series Contact Size 16 4 Way Black Plug - 10 item(s) - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Eclipse TZ-225N Tweezer, ESD-Safe, Soft-Grip, Super Fine Tip - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Long-Handle Ratchet Crimp Tool for 16-6 Ga. Non-Insulated Connectors, 1EA - Long Handled Ratchet Crimper Non-Insulated Connectors. Tools features a spring loaded handle that provides an automatic release after the crimp cycle is complete. It also has a comfort grip and four crimp zones.
- #577 Automotive Flashers (1 per pack) - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Ratchet Crimp Tool for 22-8 Ga. Non-Insulated Connectors (1 per pack) - Ratchet Crimper Non-Insulated Connectors. Ratchet Crimp Tool for 22-8 Ga. Weighs 1.1 lbs. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- 8-Way Pin Housings, DTM Series #DTM04-08PA (1 per pack) - 8-way pin housings, Deutsch DTM Series #DTM04-08PA. The Deutsch DTM Series is smaller than the DT Series. Works with DTM Series. 20-16 Gauge. Product Details.
- Side Mount to Negative Standard Top Post Adapter (1 per pack) - 3/8"-16 thread. Negative and positive clearly marked on adapter. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Short-Handled Universal Crimper Tool, 8-1/0 Ga. (1 per pack) - Use this portable, professional-grade tool rather than a bench-mount or hydraulic-assist crimp tool. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- 3/4" Dia. Blue Adhesive-Lined Shrink Tubing - (4 ft. piece) - 3/4" ID (before shrink) blue adhesive-lined shrink tubing. Made of polyolefin. Has 3 to 1 shrink ratio. Polyolefin is the standard-bearer in the shrink tubing market. It heats evenly, doesn't bubble or split, and is self-extinguishing.
- Circuit Testing Tool, 12/24 Volt, Hook Style (1 per pack) - Test 12 and 24 volt vehicle systems with this tool. If the circuit is live the bulb will illuminate. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Heavy Duty Deutsch 6 Ga. Green Metal Removal Tool - 114009HD (1 per pack) - Heavy Duty Deutsch 6 Ga. Works with DTHD, DTCE, HD, and HDP Series. Replaces 114009 plastic tool. Tool has a stainless steel shaft and aluminum handle. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- #EF-41 Automotive Flashers (1 per pack) - #EF-41 automotive flashers. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Lightweight 28-10 Ga. Stripper/Cutter Tool (1 per pack) - Stripper lightweight 28-10 Gauge. Not for use with Teflon. This lightweight tool is made of reinforced fiberglass. Features a settable strip depth up to 3/4" and a built in cutter. German precision engineering.
- #EF-32H Automotive Flashers (1 per pack) - #EF-32H automotive flashers. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Crimp Tool for 20-12 Ga. Ferrules (1 per pack) - Will crimp DIN 46228 Pt#1 & #4 type wire ferrules. This lightweight tool is great for field service. German precision engineered. Ferrule Crimper 20-12 Gauge. Crimp Tool for 20-12 Ga. Wire Ferrules.
- #EL-16 Automotive Flashers (1 per pack) - #EL-16 automotive flashers. Product Details.
- Auto-Feed Ferrule Crimp Tool (1 per pack) - Strapped Ferrule Crimper. Accepts 22-14 gauge strip ferrules. The tool is also capable of cutting and stripping 22-14 gauge wire. Economical alternative to a ferrule crimping machine. Speeds application by 200-300% over standard ferrule crimping tools.
- #EF32 Automotive Flashers (1 per pack) - #EF32 automotive flashers. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- #EL-12 Automotive Flashers (1 per pack) - #EL-12 automotive flashers. Product Details.
- Deutsch 6 Ga. White Removal Tool #114009 (1 per pack) - Deutsch 6 Ga. Works with DTHD Series, DTCE Series, HD Series, and HDP Series. Tool is made of plastic. Deutsch 114009 White Removal Tool. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- 3 3/4" Dia. Black Heavy Duty Adhesive-Lined Shrink Tubing - (1 ft. piece) - 3 3/4" ID (before shrink) black heavy duty adhesive-lined shrink tubing. Made of polyolefin. Has 3 to 1 shrink ratio. Polyolefin is the standard-bearer in the shrink tubing market. It heats evenly, doesn't bubble or split, and is self-extinguishing.
- Weather-Pack/Metri-Pack Crimping Tool (1 per pack) - 22-14 Gauge.
- 1/2" Dia. Red Adhesive-Lined Shrink Tubing - ((4) 6" pcs - 2 ft. total) - 1/2" ID (before shrink) red adhesive-lined shrink tubing. Made of polyolefin. Has 3 to 1 shrink ratio. Polyolefin is the standard-bearer in the shrink tubing market. It heats evenly, doesn't bubble or split, and is self-extinguishing.
- 4-Way Pin Housings, DTP Series #DTP04-4P (1 per pack) - 4-way pin housings, Deutsch DTP Series #DTP04-4P. Works with DTP Series. 14-12 Gauge. Product Details.
- Bar Air Manometer 13mm 1/4 BSP Gewinde Double Scale für Luftkompressor .di - Material: Iron Shell. - Easy to read dial. 1 x Compressor Gauge. You can follow below process to chontact us.
- 3-Way Pin Housings, DTM Series #DTM04-3P (1 per pack) - 3-way pin housings, Deutsch DTM Series #DTM04-3P. The Deutsch DTM Series is smaller than the DT Series. Works with DTM Series. 20-16 Gauge. Product Details.
- #EL-13 Automotive Flashers (1 per pack) - #EL-13 automotive flashers. Product Details.
- Ratchet Crimp Tool for 8-1 Ga. Ferrules (1 per pack) - Tool features a quick release, an extra-long handle for greater leverage, and five crimp zones. Tool is 13" long. Ferrule Crimper Ratchet 8-1 Gauge. Ratchet Crimp Tool for 8-1 Ga. Wire Ferrules. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Bar Air Pressure Gauge 13mm 1/4 BSP Thread Double Scale For Air Compressor_.'.
- Etcon LT130 Lamp/Voltage Tester with Holster - Batteries not included. Sold as is
- TESTED See Video -Standard Pneumatic Model 615 Wire Wrap Tool Wrapping free ship - Here is a Standard Pneumatic Model 615 Wire Wrap Tool. Appears to be in good working order. Sticker missing?. Very tip where you would insert wire has a flare to it. Not sure if this is supposed to be like this or not, but shouldn't effect operation.
- Multilink 30105K MDU Demarcation Enclosure - OTN Cabinets, and custom specification solutions. Products are available in plastic, steel, stainless. Six Sigma quality standards.
- GENSPEED W2133774E Data Cable,Cat 5e,24 AWG,1000ft,White - GENSPEED W2133774E. Data Cable,Cat 5e,24 AWG,1000ft,White. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
- JONARD TOOLS WBK-100 Panel Knockout Kit,2 Pc - JONARD TOOLS WBK-100. Panel Knockout Kit,2 Pc. Grainger reserves the right to accept or reject any order. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- GRAINGER APPROVED BRY70520NC Locking Connector,Black/White,125VAC,20A - GRAINGER APPROVED BRY70520NC. Grainger reserves the right to accept or reject any order. Grainger Part #:49YW93. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GENSPEED W7131760 Data Cable,Cat 6,23 AWG,1000ft,Blue - GENSPEED W7131760. Data Cable,Cat 6,23 AWG,1000ft,Blue. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
- Commscope Cr-540-Mss Mss Mid-Span Cable Stripping Tool 1/2" - I will do my best to resolve any and all issues.
- Commscope Cr-1070 Mss Mid-Span Cable Stripping Tool 7/8" - I will do my best to resolve any and all issues.
- Air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black U9E2 - Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff Inneren, Kompressorschalldämpfer als Zulassungsöffnung.
- HIOKI K thermocouple DT4910 Free Shipping with Tracking number New from Japan
- ENGINEER Universal Micro Conector Crimpers Precision PA-20 F/S w/Tracking# Japan - Each reference for wires: #28~22, #24~#20, #22~#18, #20~#18. Corresponds to the #28~#16 AWG wire. Product weight: 136 g. Batteries included: no. Each die thickness: 2.5 tmm, tmm 2.5, 2.5 tmm, tmm 2.5.
- Modern Hydraulic Busbar “6 inch Blade”0-90°Bus Bar Tool - 16 Tons Hydraulic Busbar Cutter 0-90° Bus Bar Tool Split Bending Machine Hydraulic Busbar Cutter (6inch/150mm Straight Blade) 0-90° Bus Bar Tool CB-150D Description This Hydraulic Busbar Cutter Is Made of High-quality Iron, Which Is Strong, Durable, and Not Easy to Deform. It Is Equipped with a Scale That Allows You to Accurately Read the Bending Angle Within the Range of 0-90°. Key Features 1) Precise Bending Angle: This product is equipped with a scale within the range of 0-90° that allows you to accurately read the bending angle and bend the metal to the angle you want. 2) Easy to Bend: It has 16T/35273lbs output force, which is very strong and can easily bend different metal materials. 3) Easy to Remove: The pin can be pulled off after bending the metal, and the w.
- Modern Hydraulic Busbar 0-90° Bus Bar Tool (16 Ton “6 inch Blade” ) - This Hydraulic Busbar Cutter Is Made of High-quality Iron, Which Is Strong, Durable, and Not Easy to Deform. 1 Hydraulic Busbar Cutter. Quick Connector: The connector of this product is a threaded ZG3/8" quick connector with very tight construction.
- Hydraulic Busbar bend 0-90° Bending Busbar bend Tool (16 Tons 6/in Blade) - This Hydraulic Busbar bend Is Made of High-quality Iron, Which Is Strong, Durable, and Not Easy to Deform. 1 Hydraulic Busbar. Bending Object: Iron, Copper, Aluminum. Quick Connector: The connector of this product is a threaded ZG3/8" quick connector with very tight construction.
- 2x (air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black A2C77) - 2X(Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff Inneren, Kompressorschalldämpfer als Zulassungsöffnung. ).
- 2x (car motorcycle hand siphon siphon pumps oil gasoline fuel liquid drink1) - Kann zum Entfernen von Wasser aus verstopften Waschbecken, Wasserbetten, kaputten Waschmaschinen, Booten und Poolabdeckungen verwendet werden. Übertragen Sie den schnell und sicher aus dem Kerosinbehälter in die Heizung.
- Hozan Parts Clip Lock function P-843
- P.k. Neuses Curved Notched Cable Sewing Needle, N287 - CURVED HOOKED CABLE SEWING NEEDLE. GOOD USED CONDITION!
- Air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black H6J4J4 - Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff Inneren, Kompressorschalldämpfer als Zulassungsöffnung.
- Air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black R5L1 - Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff Inneren, Kompressorschalldämpfer als Zulassungsöffnung.
- Ideal 45-930 STP Shielded Twisted Pair Cable Stripping System AS/IS Almost Works - (1) Ideal 45-930 STP Stripping System. STP Stripping System. Notes:This stripper is NOT working properly. The cycle almost completes successfully. After re-insertion (to remove the insulation), the machine won't let go!
- Ideal 45-930 STP Shielded Twisted Pair Cable Stripping System AS-IS Bad Control - (1) Ideal 45-930 STP Stripping System. STP Stripping System. Notes:This stripper is NOT working properly. We are not sure why. We tried to remove one of the blades, but the hardware is corroded together, and the ceramic mounting pad is broken in a way that prevents the removal of the blade.
- DF-8 12500RPM Handheld Enameled Wire Peeling Machine Stripping Stripper Cutter - Pro DF-8 handheld Magnet wire Stripping Machine / stripper Cutter 110V. Output Speed. Your satis faction is our ultimate goal. length 5 ~ 50mm. 0.3 ~ 2.5mm.
- Car motorcycle hand siphon siphon pumps oil gasoline fuel liquid siphon superBertrB6 - Kann zum Entfernen von Wasser aus verstopften Waschbecken, Wasserbetten, kaputten Waschmaschinen, Booten und Poolabdeckungen verwendet werden. Übertragen Sie den schnell und sicher aus dem Kerosinbehälter in die Heizung.
- GC Electronics Nibbler Tool - For sale a used GC Electronics Nibbler Tool. As pictured.
- HALDER SUPERCRAFT 3566.081 Repl Hammer Hndle,Sledge,Hickry,31-1/2" - HALDER SUPERCRAFT 3566.081. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- Greenlee Wire Cart #38733 - Price $225.00 - Great shape. Contractor retiring.
- Monarch 6180-012 Sensor,Magnetic - Sensing Distance 0.005 in, Temp. Range - 100 to 225 F, -73 to 107 C, Length (In.). ACT-1B/115, ACT-3/115. Light Industrial. & Recepticles. Electrical Outlets. and Enclosures. Electrical Boxes.
- Fischer DeltaScope FMP10C Coating Thickness Gauge - Rental option available.
- Monarch 6280-040 Latching Carrying Case - Latching Carrying Case, For Use With 1UFK8, 1UFK9, 1ULF1, 1ULF2. Parker 8-8-8 Obz-Ss 3/4" X 1/2" Fnpt X Cpi 316 Ss Female Branch Tee. General Purpose. & Recepticles. Electrical Outlets. Light Industrial.
- CablePrep CPT-1100-Single - CablePrep CPT-1100-Single.
- B-Line Strut Mounting Clamp Strap For 1-1/4" Pipe/Rigid Conduit NO BOLT B2011 - Capacity: 1-1/4" Rigid conduit or pipe. B-Line #B2011 1-1/4" rigid pipe strut/strap fitting. Features include Design load: 600 Lbs. Lateral/75 Lbs. (SKU # BLB2011-NOBOLT-EA; Weight: 0.2000 lbs.).
- B-Line Zinc-Electroplated Steel EMT 1-1/4" Strut Strap Pipe Clamp Fitting B2004 - EMT strut strap. 2 B-Line #B2004-ZN strut strap pipe clamp fittings. Made of zinc-electroplated steel for long lasting performance. Features include Made of zinc-plated steel. (SKU # BLB2004-NOBOLT-EA; Weight: 0.1000 lbs.).
- Ideal 45-174 Tools, Wire Strippers - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Deutsch 16-14 Ga. Green Removal Tool #0411-291-1405 - Deutsch 0411-291-1405 Green Removal Tool Deutsch 16-14 Gauge. Deutsch 16-14 Ga. Green Removal Tool #0411-291-1405. Works with DRC Series, HD Series, HDP Series, and HD10 Series. Tool is made of plastic.
- 451-00210 Bag Tire Balancing Beads 10 oz - For truck tires, trailer tires, mud tires, all terrain tires or any vehicles that present a minimum of 1/2 ton suspension. This product is not for use with motorcycles or passenger cars because the suspension is too soft.
- 2.5-6mm2 B-2546 A-2546b Crimping Tool Crimping Plier 2 Multi Tool Tools Hands - Crimping range: 2.5/4/6mm². Material: carbon steel. ★Anti-rust coating: The transparent anti-rust coating can extend the effective service life of these pliers and keep their edges and smoothness. Due to the differences between different monitors, the picture may not reflect the actual color of the item.
- Air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black M3X8 - Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff Inneren, Kompressorschalldämpfer als Zulassungsöffnung.
- Indoor Outdoor Thermometer Large Wall Thermometer-Hygrometer Waterproof Does not - Temperature range from -40 to 60°C, -40 to 140℉, both Celsius and Fahrenheit are available; humidity range from 0 to 100% RH to suit all climates. Temperature and Humidity are Important Conditions for Flower Survival.
- Air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black Q2T6 - Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff Inneren, Kompressorschalldämpfer als Zulassungsöffnung.
- Air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black M7L2 - Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff Inneren, Kompressorschalldämpfer als Zulassungsöffnung.
- Eagle No 642 Blade Clamp Buss Fuse Puller - Non-Conductive - USA - Pre Owned - We will do our best to work with you and to resolve this issue.
- Benner Nawman UP-B36 Telephone Cable Drop Slitter Tool - Benner Nawman UP-B36 Telephone Cable Drop Slitter Tool In good condition - see pics.
- Gardner Bender Sperry 2-Probe Single Indication Voltage Tester ET6102 Pack of 5 - High visibility voltage tester. Tests 80V to 25V AC/DC. Twin probe. Easy-to-see indicator light. Test lead holder built into the case for added convenience. Fits a standard outlet. UL listed. 1 per card. Type: Contact, Single Indiation .AC Voltage: 80V to 250V AC .DC Voltage: 80V to 250V DC .Power Source: .Lead Length: 3 In. .Certification: UL Listed . pack of 5.
- Wire Stripper 6.5" - New, Sealed! - Wire Stripper 6.5" - New, Sealed!You will receive the same item shown in photos.
- GRAINGER APPROVED V110 4Y Conduit Strap Clamp,Steel,PK10 - GRAINGER APPROVED V110 4Y. Conduit Strap Clamp,Steel,PK10. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAR8. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V110 3-1/2Y Clamp,Steel,Over L 9in,PK10 - GRAINGER APPROVED V110 3-1/2Y. Clamp,Steel,Over L 9in,PK10. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAR7. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- General Tools Drive-Pin Punch 8-Pc Set + Vinyl Case, 4" - - Heat-treated tool steel with centerless-ground ends - 4" long with knurled bodies offer solid grip - First (4) have 3/4" drive length, last (4) have 1" drive length - Contains 8 individual punch sizes: 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16", and a vinyl case.
- Tire Balance Beads - One 12 Ounce Pack of Counteract Beads - TA Truck Service... - Wheel Balancing Beads. Reduce Maintenance Costs, Increase Tire Life. We take our reputation seriously.
- CP Techmotive SD25I020MAQ2 Electric Screwdriver 1/4" Hex Drive with grip + cable - 1841 W Carriage House Dr, Baton Rouge, LA 70815. For all others, there will be extra. We acquired the unit in a state surplus sale. We don’t know the prior usage history.
- POWER FIRST 22EZ36 Long-Barrel Spl,TinPltd,Long,Black - Long-Barrel Spl,TinPltd,Long,Black. POWER FIRST 22EZ36. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
- Scotchlok® tool crimper pliers large scotchlock scotchloc - This will be for 1set of large crimpers.
- Fujiya Wire Striper A type 165mm black gold / with spring PP323A-165-BG - Adaptive wire size (AWG): 10-20 ■ adaptive electric wire size (corresponding SQ size): 0.5 to 5.5 ■ Total length: 167mm ■ Weight: 120g ■ Material: Special steel. We do our best for you!! Japan Usage Item.
- Fujiya Wire Striper B type 165mm black gold / with spring PP323B-165-BG Black - Adaptive wire size (AWG): 16-30 ■ adaptive electric wire size (corresponding SQ size): 0.05-1.25 ■ Total length: 167mm ■ Weight: 120g ■ Material: Special steel. We do our best for you!! Japan Usage Item.
- Gardner Bender Sperry Scan-Test 5-in-1 Multimeter PD6902 Pack of 5 Gardner - Locate studs, metal or AC voltage behind the wall before cutting or nailing. Whether searching for studs or simply installing bracing, knowing what lies beneath the surface can ensure a safe work environment. The Scan-Test integrates multiple technologies into one easy to use tool. Scan the wall to find either wood or metal studs for secure installations, while avoiding metal pipes or other metal objects behind the wall. Cuts or nicks in the insulation of wiring can cause long-term problems in electrical systems and even cause unsafe working conditions, so avoid nailing to a live wire behind the wall by scanning for AC voltage with Circuit Alert technology. Correctly wired receptacles are a must, and this 5-in-1 multi-scanner includes an integrated outlet tester with GFCI test.
- Gardner Bender 80V to 140V Circuit Breaker Finder CS550A Pack of 6 Gardner - Locates AC circuits quickly and easily. Simply plug the transmitter into a wall outlet on the circuit you are trying to locate, then run the receiver over the circuit breakers or fuses in your load center. Receiver will beep and flash when the correct circuit is located. No need to interrupt power. Does not interfere with sensitive electronic equipment. Receiver uses one 9-volt battery (not included). UL (Underwriter's Laboratories) listed. Voltage: 80V to 140V .Battery Type: 9V .Batteries Included: No . pack of 6.
- Gardner Bender Sperry 36 In. Continuity Tester CT6101 Pack of 5 Gardner Bender - Testing equipment can be put to good use ensuring that electrical equipment is properly installed and safe to operate. Faulty installations can be lethal; the condition of electrical installations can be established when contractors use test equipment. Gardner Bender is pleased to offer an innovative full feature line of test equipment designed to make electrical work faster and safer. The Continuity Tester is very easy to use and is used to test for breaks in non-energized wires or cords. Continuity has a bright 360 visual indicator located near the tip along with a flexible lead for ease of use. Probe Length: .Handle Length: .Lead Length: 36 In. .Battery Type: 2 AAA, Included .Crush Rating: .Pocket Clip: . pack of 5.
- Gardner Bender Sperry 600V AC Digital Compact Clamp Meter GCM-221 Pack of 2 - Voltage range: AC voltage 600V; Current range: AC current 600A; Functions: Resistance 200 ohm. Specifications: Auto ranging. Total functions: 3. Total Ranges: 3. Display count: 1000. Jaw size: 1-1/4". Accuracy: AC V: + 1.5%, AC A: + 2.0%, ohm: + 1.0%. Uses (1) AA battery (included) and includes 1 spare. 5A/250V fuses. UL (Underwriter's Laboratories) listed. 1 year limited warranty. Voltage: 600V AC .Battery Type: (1) AA (Included) .Certification: . pack of 2.
- Gardner Bender Heavy-Duty 3-Way Voltage Tester GET-3213 Pack of 5 Gardner Bender - Heavy-duty 3-way voltage tester tests AC/DC Voltage at 120, 240 and 277V. Individual indicators for each voltage range assures reliability. 24-inch test lead is long enough for convenient testing. Unit is both durable and compact. Testing applications include outlets, panels, light fixtures, switches, circuit breakers and more. Type: Contact, Twin Lead .AC Voltage: 480V AC .DC Voltage: 110V DC .Power Source: .Lead Length: 24 In. .Certification: ETL Listed . pack of 5.
- Mr Longarm PAR Flood Bulb Changer 3001 Pack of 12 Mr Longarm 3001 039932030014 - Reduce time and effort when changing hard-to-reach PAR floodlight bulbs. Quick release design. Attaches to any broom, mop, or extension pole handle. Bulb Type: PAR pack of 12.
- Automotive Cable Wire Tracker Car Tracer Finder Test Short & Open DC 6~42 Volts, - You can also use it in checking for short circuit and exacting open circuit and so on. Diagnose and judge the break point from Slight Change of the continuous audio signal from receiver. Transmitter and receiver LEDs show open or short circuit conditions.
- Molex HTR 8519A Hand Crimping Tool CLEAN! - Molex HTR 8519A Hand Crimping Tool CLEAN!. This item is preowned and shows light signs of wear and use but in great overall cosmetic condition and perfect working order. What you see in the pictures is what you get, nothing more is included. Please check out all of the great pictures of different angles for any questions or doubts about the condition of the item.
- Cable Stripper Blade Replacement Blade for Copper Wire Stripping Machine 15 mm - Product description: ★The stripping blade is made of high-quality alloy, with an outer diameter of 49.5 mm, an inner diameter of 28 mm, and a thickness of 15 mm. Compared with ordinary steel blades, it has higher hardness and longer service life. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness. It is processed with advanced precision grinder processing equipment to ensure its accuracy. ★The blade of the cable stripper becomes hard, so it can keep sharp for a long time. It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. ★Enhanced trimming and high temperature quenching can effectively reduce the loss of the blade and extend the service life. The peeling is fast, smooth.
- VESSEL 9000 2.6 x 30 Ceramic Trimmer Tool 2-Each NEW OLD STOCK - Retired electronics tech with a myriad of obsolete. VESSEL 9000. (All US Military designations). ~USA PROUD ~. ~ ~ ~ ~ ~ ~ ~ ~ ~.
- Bar Air Pressure Gauge 13mm 1/4 BSP Thread Double Scale For Air Compressor_USJN - 1 x Compressor Gauge. Material: Iron Shell. - Easy to read dial. Colour: Black.
- Bar Air Pressure Gauge 13mm 1/4 BSP Thread Double Scale For Air Compressor_USIT - 1 x Compressor Gauge. Material: Iron Shell. - Easy to read dial. Colour: Black.
- Proto J194 Safety Wire Twister Plier Set
- Commercial Electric 7-Piece Electricians Tool Set With Pouch 997722 (P24002978) - VISTA PAWN.
- Teledyne Stripall Thermal Wire Stripper 117V Model Tw-1
- Rack-A-Tiers The Jimbo Wire Pull Bracket - Rack-A-Tiers The Jimbo Wire Pull Bracket.
- Jameson Style C A1 Electrician's Scissors / Shears Made in U.S.A. 5" Overall - Condition is used/pre-owned. As of February 1.
- Ratchet with Bit Case and 6 Bits - The Victorinox SwissTool Ratchet with bitcase and 6 bits is a Spare Part for the Original Victorinox SwissTool Collection Product Specifications: Spare Part for Victorinox Swisstool Stainless Steel Limited lifetime Warranty Tools: Ratchet (30 Nm) Bit Hex 3 Bit Hex 4 Bit Phillips 0 Bit Phillips 3 Bit Torx 10 Bit Torx 15 Space for additional bits.
- Ideal 30-496 Telemaster Crimp Tool RJ-11 and RJ-45 Modular Plugs - Model Number: 30-496. NEW!Box has been opened and inspected. This product may contain a chemical known to the state of California to cause cancer and birth defects or other reproductive harm .
- BLACKHAWK CHASSIS PUNCH Hole Cutter Z1056 & Die Z1057 4-1/2" - BLACKHAWK CHASSIS PUNCH Hole Cutter Z1056 & Die Z1057 4-1/2"., WILL FIT WITH GREENLEE DRAW BOLT NOT INCLUDED NOT. SALE IS FOR PUNCH AND DIE 4.5", RETIRED ELECTRICIAN, NO LONGER NEEDED THIS IS BLACKHAWK NOT GREENLEE. THANK YOU PROMPT SHIPPING
- Curien N2 Neuron - Built-in One on One training & community resources. Built-in Parasitic Draw Testing (for fuses and more). Product Details.
- Ideal Ratchet Crimp Tool for 22-10 Ga. Insulated Connectors (1 per pack) - Ideal Ratchet Crimper Insulated Connectors. Weighs 1.5 lbs. Ideal Ratchet Crimp Tool for 22-10 Ga. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Ratchet Crimp Tool for 10-6 Ga. Ferrules (1 per pack) - Will crimp US or DIN type wire ferrules, and conforms to DIN 46228 Pt#1 & #4 or EN 60947-1 type wire ferrules. Tool features an ultra-smooth ratcheting system with quick release. Also features a comfort grip and requires minimal hand force to crimp.
- WIRE WRAPPING BIT Wire Wrap OK M&T P-2224 UB 22-24 awg - I am not positive what the other item is but the bit fits in it perfectly.
- WIRE WRAPPING BIT Wire Wrap OK M&T 2026 UB 20-26 awg - I am not positive what the other item is but the bit fits in it perfectly.
- WIRE WRAPPING BIT Wire Wrap OK M&T R 3217 22 GA - I am not positive what the other item is but the bit fits in it perfectly.
- Quick Hydraulic Pressure Pliers Wire Cable Lug Terminal Crimper Crimping Tool - Press Joint Range : 4 -70mm². Hex Die Used : 4, 6, 10, 16, 25, 35, 50, 70. Deadweight : 2.5kg.
- No Clean Soldering Pen And Solder-Braided Tape Set For-Electronics-Welding - High-Quality Material: Our solder wick is made of quality copper wire and precise weaving technology, enhancing tension on the surface to absorb excess solder. The solder remover wick features good thermal conductivity and absorption, reducing the risk of thermal injury to circuit boards.
- Vintage Klein Tools 1570-3 Cable/Lineman's Skinning Knife Hook Blade With Ring
- Fluke Networks RJ45/11 Modular Adapter (CIQRJA) - Product Title Fluke Networks RJ45/11 Modular Adapter (CIQRJA). Fluke Networks CIQ-RJA RJ45/11 Modular Adapter for CableIQ Network Cable Tester. Compatibility: Fluke Networks CableIQ Residential Qualifier.
- GRAINGER APPROVED V111 1/2EG Conduit Strap Clamp,Steel,PK10 - GRAINGER APPROVED V111 1/2EG. Conduit Strap Clamp,Steel,PK10. Grainger reserves the right to accept or reject any order. Grainger Part #:4A982. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- DWYER A3025 Pressure Gauge,0 to 25 In H2O - DWYER A3025. Pressure Gauge,0 to 25 In H2O. Range 20 Degrees to 120 Degrees F. Power adapters and other modifications may be necessary for proper operation in other countries. Grainger reserves the right to accept or reject any order.
- GRAINGER APPROVED V220 3/8 Stand Nut,Steel,Overall W 1 3/8in,PK25 - Stand Nut,Steel,Overall W 1 3/8in,PK25. GRAINGER APPROVED V220 3/8. Grainger reserves the right to accept or reject any order. Grainger Part #:5YE29. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- No Clean Soldering Pen And Solder-Braided Tape Set For-Electronics-Welding
- Gk5225 Automotive Wire Piercing Dc Voltage Circuit 6v / 12v Hook Probe Tester 59 - If you have ever stabbed your own finger trying to get a regular tester into a wire, you will appreciate the ALLOSUN Wire Piercing Circuit Tester. This device identifies wiring issues such as short circuits, fuses, test connections, wiring harnesses, and more.
- Harris Dracon Division HD 8762/D-814 Punch Down Wire Impact Cutter Tool - Includes one double-ended punch blade.
- HIOKI LAN cable HiTESTER 3665
- Amp 69959 Hand Crimp Tool Ampli-Bond Series Terminals & Splices Te Connectivity - A signed credit card authorization form is required for all orders paid with credit card. ALWAYS HERE TO HELP. SKU: I620396. We directly accept US issued credit cards.
- Astro / Davo 827D Microdot Inc Ratchet Hand Crimp Tool 010-0161-0000 - This lot is for oneAstro / Davo 827D Microdot Inc Ratchet Hand Crimp Tool 010-0161-0000. A signed credit card authorization form is required for all orders paid with credit card. ALWAYS HERE TO HELP.
- 3x IDEAL INDUSTRIES 45-164 COAXIAL CABLE STRIPPER 1/4" TO 9/16" DIAMETER - BLUE - This unit will arrive in the condition shown. ALWAYS HERE TO HELP. Two blades installed. A signed credit card authorization form is required for all orders paid with credit card.
- AMP 46121 Hand Crimp Tool DAHT PIDG 26 - 22 AWG TE CONNECTIVITY TYCO - AMP 46121 Hand Crimp Tool DAHT PIDG 26 - 22 AWG. This lot is for oneAMP 46121 DAHT PG PIDG 26-22 AWG Hand Crimp Tool. # 26-22 AWG. A signed credit card authorization form is required for all orders paid with credit card.
- Mountz Stc 96010143 Torque Tool Power Supply Output - 20 Or 30Vdc @ 2.5A Max - Output - 20 or 30VDC @ 2.5A max. Input: 120 or 240V. ALWAYS HERE TO HELP. This unit will arrive in the condition shown.
- Amp 46121 Aht Pg Pidg 26-22 Awg Hand Crimp Tool Assembly Te Connectivity Tyco - This lot is for oneAMP 46121 AHT PG PIDG 26-22 AWG Hand Crimp Tool. # 26-22 AWG. A signed credit card authorization form is required for all orders paid with credit card. ALWAYS HERE TO HELP. This unit will arrive in the condition shown.
- Amp 220009-1 Hand Crimp Tool 50-Ohm Bnc Connector - 50-Ohm BNC connector. A signed credit card authorization form is required for all orders paid with credit card. This lot is for oneAMP 220009-1. This unit will arrive in the condition shown. ALWAYS HERE TO HELP.
- Harris Dracon Division HD 8762/D-814 Blade Punch Down Wire Impact Tool+CRIMPER - Harris Dracon Division HD 8762/D-814 Blade Punch Down Wire Impact Tool+ no name CRIMPER. You get everything shown, exactly as shown.
- Hastings Telescopic Fiberglass Electrical Hot Stick 50’ - Hastings Telescopic Fiberglass Electrical Hot Stick 50’. Telescoping. Sold as is. Please review item condition in pictures as pictures are part of the description. No returns.
- Knipex Electricians Folding Pocket Knife Cable Stripper 162050 Germany
- Lobster / Crimping Pliers / Ak22A - We are always happy to help you and happy to find what you are looking for. Depends on custom in your country also.
- GE G635 Silicone Dielectric Compound 8.0oz 227g Tube - It also has good oxidation resistance at higher temperature. The lubrication consistency of the grease is good as are its penetration properties. Its excellent adherence makes it stick well on the surface.
- Bussmann Cooper 15-Amp Time Delay Cartridge Fuse BP/FRS-R-15 NEW - Bussmann Cooper 15-Amp Time Delay Cartridge Fuse BP/FRS-R-15 NEW.
- Wiha Insulated 1000v 6.5" Wire Strpper 32860 - Wiha Insulated 1000v 6.5" Wire Strpper 32860. Excellent condition.
- KNIPEX Tools - Electronics Wire Stripping Shears, Multi-Component (1182130) - KNIPEX - 11 82 130 - 5 1/4"Electronics Wire Stripping Shears. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- 16 Ton Hydraulic Busbar“6 inch Blade” 0-90° Busbar Bending Tool - This Hydraulic Busbar Cutter Is Made of High-quality Iron, Which Is Strong, Durable, and Not Easy to Deform. 1 Hydraulic Busbar Cutter. Machine TypeHydraulic Busbar Cutter. Quick Connector: The connector of this product is a threaded ZG3/8" quick connector with very tight construction.
- 16 Ton Hydraulic Busbar“6 inch Blade” 0-90° Busbar Bending Tool - This Hydraulic Busbar Cutter Is Made of High-quality Iron, Which Is Strong, Durable, and Not Easy to Deform. 1 Hydraulic Busbar Cutter. Machine TypeHydraulic Busbar Cutter. Quick Connector: The connector of this product is a threaded ZG3/8" quick connector with very tight construction.
- 16 Ton Hydraulic Busbar“6 inch Blade” 0-90° Busbar Bending Tool - This Hydraulic Busbar Cutter Is Made of High-quality Iron, Which Is Strong, Durable, and Not Easy to Deform. 1 Hydraulic Busbar Cutter. Machine TypeHydraulic Busbar Cutter. Quick Connector: The connector of this product is a threaded ZG3/8" quick connector with very tight construction.
- 16 Ton Hydraulic Busbar“6 inch Blade” 0-90° Busbar Bending Tool - This Hydraulic Busbar Cutter Is Made of High-quality Iron, Which Is Strong, Durable, and Not Easy to Deform. 1 Hydraulic Busbar Cutter. Machine TypeHydraulic Busbar Cutter. Quick Connector: The connector of this product is a threaded ZG3/8" quick connector with very tight construction.
- 3M Idc 925980 Assembly Tool - New - 3M IDC 925980. ASSEMBLY TOOL.
- WE Lampholder 600 Volt 1500W 1G52 - The product image is the actual item you will receive including all contents unless otherwise noted. We are not an authorized dealer of this product. This product has no manufacturers warranty. We will take care of you!
- Weather Pack Terminal Remover Tool #12014012 - Made in the USA. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- cementex insulated tools - cementex insulated tools.
- Electric Tape Binding Machine Air Conditioning Copper Pipe Binding Machine
- Rack-A-Tiers® 99300 Ferret WiFi Inspection Tool - Rack-A-Tiers® 99300 Ferret WiFi Inspection Tool.
- ALLOSUN GK5225 Automotive Wire Piercing DC Voltage Circuit 6V / 12V Hook Probe T - Item model number GK5225. Part Number GK5225. Size GK5225. If you have ever stabbed your own finger trying to get a regular tester into a wire, you will appreciate the ALLOSUN Wire Piercing Circuit Tester.
- Crescent Apex Eshok-Guard Hex Bit Isolator/insulator 1/4'' X 2-1/4'' - Protect yourself from electric shock with Crescent APEX’s new patented isolated technology; eSHOK-GUARD; providing insulation of up to 1,000 volts. Combining safety and convenience for a revolutionary experience when working around potential live wire applications; eSHOK-GUARD’s impact-rated design withstands heavy-use; impact tool applications; so you never have to sacrifice protection when using power tools.
- Feit Electric 017801008623 Bulb Fluor Cir Ww 4Pin 8In 22W - Feit Electric 017801008623 Bulb Fluor Cir Ww 4Pin 8In 22W.
- Anti Static Wrist Straps - 3 Pack - Reusable Anti-Static Wrist Straps Equipped - The adjustable strap fits your wrist comfortably.
- Carpenter model 42B Compu-Cut Wire and tubing cutter - This machine has been used before and has some scratches on the clear plastic shield.
- Bashlin traveling ground Aerial Telecom - Bashlin traveling ground Aerial Telecom.
- GRAINGER APPROVED FS-500 ST4 120.00 Strut Channel,SS,Overall L 10ft - GRAINGER APPROVED FS-500 ST4 120.00. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAL6. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V500 1/2SS Washer,304 SS,Overall W 1 5/8in,PK25 - Washer,304 SS,Overall W 1 5/8in,PK25. GRAINGER APPROVED V500 1/2SS. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAP4. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Automatic Scrap Cable Stripper Electric Wire Stripping Machine Copper Recycling - Can Be Operated by One Person or Two Person to Improve Stripping Efficiency and Output. Stripping Range: 1-20mm / 0.04-0.79in. 1 Wire Stripping Machine. Small and Compact, Easy to Use and Carry. Machine Total Height: 120mm / 4.7in.
- Fluke Networks 11293000 IS60 Pro-Tool Kit w/D914S, D-Snips, Sharpie - The D914S SoftTouch Punch Down Tool will accept all industry standard twist and lock blades and has a comfortable handle that enables technicians to make connections with much less effort. The D914S is a unique all-in-one punch-down tool that is compatible with all industry standard twist and lock style blades.
- Klein Tools 88906 Electrician's Conduit Scoring Tool. Missing Original Box - KLEIN TOOLS 88906 ELECTRICIAN'S CONDUIT SCORING TOOL. MISSING ORIGINAL BOX.
- SWT508-NX2 Computer Cable Wire Peeling Stripping Cutting and Twistin - Jacket stripping length: thread 0.1 - 250mm, tail 0.1-150mm. The middle of peeling: 13 stripping. Stripping speed: 4000 - 10000/h. Cutting tolerance: 0.002 L or less (L = Cutting length). Cutting line core cross-sectional area: 0.1 - 6mm2 the AWG (12 # -32 #).
- Buchanan Crimper Tool Kit 5180-00-937-6846 167-53 Dmc350
- Woods Modular 2 Way Crimper Kit - 2 way crimper Kit, includes modular connectors for both base cord and handset
- SWT508-NX2 Computer Cable Wire Peeling Stripping Cutting and Twistin - Jacket stripping length: thread 0.1 - 250mm, tail 0.1-150mm. The middle of peeling: 13 stripping. Stripping speed: 4000 - 10000/h. Cutting tolerance: 0.002 L or less (L = Cutting length). Cutting line core cross-sectional area: 0.1 - 6mm2 the AWG (12 # -32 #).
- Panduit Pbtmt Battery Powered Banding Tool Cable Tie Cordless Tool - PANDUIT PBTMT BATTERY POWERED BANDING TOOL CABLE TIE CORDLESS TOOL. Very little use (about 50 metal ties)
- JAMESON Splicer Snips Electrician Scissors w/ Snip Grip Made in USA - JAMESON Splicer Snips Electrician Scissors w/ Snip Grip Made in USA.
- Heavy Duty Deutsch 10-8 Ga. Gray Metal Removal Tool -114008HD (1 per pack) - Works with DTHD, DTCE, HD, and HDP Series. Replaces 114008 plastic tool. Tool has a stainless steel shaft and aluminum handle. Heavy Duty Deutsch 10-8 Ga. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Chance 4' Epoxiglass Electrical Hot Stick , E4060520 - Model: E4060520. MPN: E4060520. Small orders are no problem. Your Best Work Starts Here™. Be sure to add us to yourfavorites list ! Lot# BY249 3.11.
- Hubbell SD-2050-C1 50ft Static Discharge Cable Gleason Reel for Grounding
- MONOPRICE 148 Patch Cord,Cat 5e,Booted,White,100 ft. - MONOPRICE 148. Patch Cord,Cat 5e,Booted,White,100 ft. Voice and Data Patch Cord. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- ALLOSUN Automotive Cable Wire Tracker Car Tracer Finder Test Short & Open DC 6~4 - Diagnose and judge the break point from Slight Change of the continuous audio signal from receiver. Transmitter and receiver LEDs show open or short circuit conditions. Widely applied in Checking Short Circuit, Locating Open Circuit, Wire Tracing, Wire Identification etc.
- Air compressor intake filter soundproof muffler 1/4 BSP 13 mm thread black B1S3 - Dies ist ein Luftkompressor-Schalldämpfer, der am Einlassanschluss des Luftkompressors verwendet wird. Schwarze Kunststoffkonstruktion, Schaumstoff Inneren, Kompressorschalldämpfer als Zulassungsöffnung.
- Rack-A-Tiers MAG6589 Wire Python Magnafish Fish Tool - Rack-A-Tiers MAG6589 Wire Python Magnafish Fish Tool. Used, see pictures. All pieces there.
- Electric Cable Stripper Blade Copper Wire Stripping Machine Replacement Blade - Product Description: ★the Stripping Blade Is Made of High-quality Alloy, with an Outer Diameter of 65 Mm, an Inner Diameter of 26 Mm, and a Thickness of 15 Mm. Compared with Ordinary Steel Blades, It Has Higher Hardness and Longer Service Life. ★Our Cable Stripping Blades Are Quenched at High Temperature to Enhance Their Hardness and Toughness. It Is Processed with Advanced Precision Grinder Processing Equipment to Ensure Its Accuracy. ★the Blade of the Cable Stripper Becomes Hard, so It Can Keep Sharp for a Long Time. It Is Very Suitable for Cutting Wires of Different Materials and Removing Plastic and Rubber Insulation. ★Enhanced Trimming and High Temperature Quenching Can Effectively Reduce the Loss of the Blade and Extend the Service Life. the Peeling Is Fast, Smooth and Without Burrs.
- Cable Stripper Blade Cut Replacement Tool For Wire Stripping Machine HXSMS-25 - Product description: ★The stripping blade is made of high-quality alloy, with an outer diameter of 49.5 mm, an inner diameter of 28 mm, and a thickness of 15 mm. Compared with ordinary steel blades, it has higher hardness and longer service life. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness. It is processed with advanced precision grinder processing equipment to ensure its accuracy. ★The blade of the cable stripper becomes hard, so it can keep sharp for a long time. It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. ★Enhanced trimming and high temperature quenching can effectively reduce the loss of the blade and extend the service life. The peeling is fast, smooth.
- TREND Networks SecuriTEST IP - Digital/Analog/HD Coax CCTV Tester - Product Line SecuriTEST. Manufacturer TREND Networks. Serial Port Yes. Manufacturers change colors and item details frequently and often do not update pictures. We have no personal knowledge or experience with this product or ability to customize it.
- Manual Wire Stripping Machine Scrap Cable Stripper Scrap Metal Recycling Tool US - Manual Wire Cable Stripping Machine Stripper Tool Scrap Metal Recycle 1-20mm USA The cutter head is a fragile accessory. It can also be purchased separately. The price is $8 for free shipping. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine.
- Copper Wire Stripping Machine Cable Stripper Tool Automatic Scrap Metal Recycle - Manual Wire Cable Stripping Peeling Machine Scrap Stripper for 1-20mm Wire USA. Can be operated by one person or two person to improve stripping efficiency and output. Stripping range: 1-20mm / 0.04-0.79in.
- Pro Handheld Magnet Wire Stripping Stripper Cutter Machine 12500 r / min 110V - 0 ~ 12500 r / minTechnical. Output Speed. Your satis faction is our ultimate goal.
- Wire Stripper Spare Blade Cable Copper Wire Stripping Machine Replacement Blade - Product description: ★The stripping blade is made of high-quality alloy, with an outer diameter of 49.5 mm, an inner diameter of 28 mm, and a thickness of 15 mm. Compared with ordinary steel blades, it has higher hardness and longer service life. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness. It is processed with advanced precision grinder processing equipment to ensure its accuracy. ★The blade of the cable stripper becomes hard, so it can keep sharp for a long time. It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. ★Enhanced trimming and high temperature quenching can effectively reduce the loss of the blade and extend the service life. The peeling is fast, smooth.
- Milwaukee 48-22-2167 66/110 Punchdown Blade - Milwaukee 48-22-2167 66/110 Punchdown Blade.
- Electric Wire Stripping Machine Automatic Scrap Cable Stripper Copper Recycling - Can Be Operated by One Person or Two Person to Improve Stripping Efficiency and Output. Stripping Range: 1-20mm / 0.04-0.79in. 1 Wire Stripping Machine. Small and Compact, Easy to Use and Carry. Machine Total Height: 120mm / 4.7in.
- Structured Medi Amp Accessories with Mass Termination Multi-Pair Tool Handle - The Wire Punchdown Tool enables 1-step punchdown of 110-Style or 66 Connecting Block IDCs with a single push on the handle. Specialized blades, stripping and crimping tools and other accessories complete the collection.
- ^^ Gardner-Denver A605301 Wire Wrapping Tool With Bit (Pam22) - No accessories or power cords. This powers up. See pictures for more details. This powers up, but it is labeled not working correctly. SOLD AS IS FOR PARTS OR REPAIR! APRIL 2023. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided.
- Aimco Torque Driver Electric Screwdriver With Aim Electra Ae-4010 35V Dc - TESTED GOOD DRIVER -- WHAT YOU SEE IS WHAT YOU GET. If for any reason you are not satisfied or receive an item DOA.
- B-Line Green Steel 2-Hole Closed 52 1/2 Degree Angle 9/16" Hole Mounting B160GRN - B-Line #B160GRN green steel 2-hole closed angle. Features 9/16" mounting holes and a 1/4"thickness. Hot rolled pickled and oiled process. Provides strength and stability to various support system applications.
- Dura-Blade 110/66 Cut Punchdown Blade Klein Tools VDV427-104 - Klein Tools - Dura-Blade 110/66 Cut Punchdown Blade Klein Tools VDV427-104. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- NEW Handheld Enameled Wire Scraping Paint/Stripper Cutter 12500r/Min Detachable - Pro DF-8 handheld Magnet wire Stripping Machine / stripper Cutter 110V. Your satis faction is our ultimate goal.
- JDV WG800 Manual Wire Wrap Gun Tool - JDV Wire Wrap Gun Tool.
- Vintage 8 1/2-inch SL5-8 Lineman Pliers cutters used is in good condition - There are no burn marks or nicks in the cutting teeth. I won’t list things for less than I want for it, but I will list with no reserve so you can own them without guessing.
- 2mm Thickness Green Anti-Fatigue Floor Anti-Static Workbench 2 Layers ESD Mat - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Hand Cable Stripper Copper Wire Stripping Peeling Machine Seperator Recycle Tool - Manual Wire Stripping Machine 3 blades Scrap Cable Peeling Stripper Machine 32mm. Stripping machine + blade 3 + small wrench 2 + screw accessories. Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc.
- Manual Wire Stripping Machine Scrap Cable Stripper For Scrap Copper Recycling US - Stripping machine + blade 3 + small wrench 2 + screw accessories. Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc. The shaft and side plate hole have no wear and long service life.
- Portable Manual Wire Stripping Machine Scrap Cable Stripper FIT 1-32mm - Stripping machine + blade 3 + small wrench 2 + screw accessories. Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc. The shaft and side plate hole have no wear and long service life.
- Ratchet Crimp Tool for 6-2 Ga. Ferrules (1 per pack) - Ferrule Crimper Ratchet 6-2 Gauge. Ratchet Crimp Tool for 6-2 Ga. Wire Ferrules. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Outboard Motor Cover 20-30 HP, Full Outboard Engine Cover, Black 600D Waterproof - Specification Color: Black Style: Modern Condition: New Material: 600D Oxford Cloth Vehicle Service Type: Boat Applicable Outboard Motor: 20-30HP Cover Circumference: 1.65m/ 5.41ft Cover Height: 1.37m/ 4.49ft Package Size: 20*20*5cm/ 7.87*7.87*1.97in Net Weight: 0.4kg/ 0.882lbs Gross Weight: 0.45kg/ 0.992lbs Package Included 1* Outboard Motor Cover 1* Storage Bag.
- Greenlee 796 Ratchet Cable Bender ED4U #3091 - (:) ELECTRICDEALSFORYOU #3091 SHELF: 1-C. Greenlee 796 Ratchet Cable Bender. Good pre-owned condition.
- US Durable Copper Wire Stripping Machine Hand Drill Operated Cable Stripper SALE - Can be operated by one person or two person to improve stripping efficiency and output. Stripping range: 1-20mm / 0.04-0.79in. 1 Wire Stripping Machine. Stripping range1-20mm / 0.04-0.79in. Small and compact, easy to use and carry.
- Wire Stripping Machine 1-20mm Manual Copper Cable Peeling Peeler Stripper+Cutter - Features: Applicable to 1-20mm dameter wire. Small and compact, easy to use and carry. Sturdy and practical, free to disassemble, free assembly. Can be operated by one person or two person to improve stripping efficiency and output. Portable size, which is pretty suitable for home or industrial use. Fine quality, safe and convenient to operate. Specifications: - Material: steel - Color: black - Stripping range: 1-20mm / 0.04-0.79in - Machine total height: 120mm / 4.7in - Machine total width: 160mm / 6.3in - Steel cutter length: 100mm / 3.9in - Machine weight: 1381g / 3.0lb - Steel cutter weight: 19g / 0.7ounce - Package size: 170 * 145 * 60mm / 6.7 * 5.7 * 2.4in - Package weight: 1479g / 3.3lb Package list: 1 * Wire Stripping Machine 1 * extra Cutter.
- 16 Ton Hydraulic Busbar bend 0-90° Bending Angle Busbar bend Tool 150mm 6" Iron - Hydraulic Busbar bend (6inch/150mm Straight Blade) 0-90° Bus bar bend Tool Cb-150d Description This Hydraulic Busbar bend Is Made of High-quality Iron, Which Is Strong, Durable, and Not Easy to Deform. It Is Equipped with a Scale That Allows You to Accurately Read the Bending Angle Within the Range of 0-90°. Key Features 1) Precise Bending Angle: This Product Is Equipped with a Scale Within the Range of 0-90° That Allows You to Accurately Read the Bending Angle and Bend the Metal to the Angle You Want. 2) Easy to Bend: It Has 16t/35273lbs Output Force, Which Is Very Strong and Can Easily Bend Different Metal Materials. 3) Easy to Remove: the Pin Can Be Pulled off After Bending the Metal, and the Workpiece Can Be Easily Removed Without the Influence of the Metal Length.
- Cementex 8-Pc Double-insulated Tool Kit Plier, Cutter, Screwdriver & Wrench Set - If you have any problem with your order.
- Bussmann 60 amps 250 volts Fiberglass Dual Element Time Delay Fuse 2 pk
- Hastings EV-35 Telescopic Fiberglass Hot Stick/ Measuring Stick - Hastings EV-35 Telescopic Fiberglass Hot Stick/ Measuring Stick.
- Hastings EV-35 Telescopic Fiberglass Hot Stick/ Measuring Stick - Hastings EV-35 Telescopic Fiberglass Hot Stick/ Measuring Stick.
- No Clean Soldering Pen and Solder Braided Tape Set for Electronics Welding
- bathea industrial aluminum Block Pulley w berings 2500LB big heavy duty crane ? - It looks like it’s made of aluminum but I’m not sure. It has bearings and it spins nicely. So the most important thing is to look at all of the photographs because this item will arrive to you exactly as pictured in used condition.
- Xcelite 378MN 5-1/2" Electronic Pliers - Xcelite 378MN 5-1/2" Electronic Pliers. Ships via FedEx, UPS or USPS depending on location.
- Lead Wire cutter Heat Shrinkable Tube Positioning Cutter Hose Cutting Machine - New Lead Wire cutter Heat Shrinkable Tube Positioning Cutter Hose Cutting Machine Tube Cutting Knife Set Positioning Scissors.
- 220V Automatic Cutting Machine,Wire Pay-Off Automatic Terminal Machine Wire Reel - Material: iron rod + high temperature paint.
- Spool Dispenser Coil Wire Untangler Electrical Romex Spinner Reel MC Unroller ME - Mounting brackets have the Capacity to support 1000' Reels. Floor or Stud Mount Cable Dispenser. Easy loading, dispensing and changing of armored cable (BX/MC) or NM-B. Item model number MH8110. Weight: 6.39 lb.
- Wire Stripping Machine Manual Cable Peeling Machine Wire Stripper Cutter(1~20mm) - Characteristic: Stripping Fixture. 1 X Stripping Machine. The Cutter Head Is a Fragile Accessory. The Cutter Head Can Be Sharped with a Sharpening Stone. Clamp Material: Bearing Steel. Shape: Ball Blade.
- Daniels DMC Install Tool DAK95-22MA (M81969/8-01 REV A) - Daniels DMC Removal Tool DAK95-22MA (M81969/8-01 REV A). Item is in good conditionNo damage. Tip is in good condition. Does not have original packaging or box.
- GRAINGER APPROVED V220 5/16 Stand Nut,Steel,Overall W 1 3/8in,PK25 - Stand Nut,Steel,Overall W 1 3/8in,PK25. GRAINGER APPROVED V220 5/16. Grainger reserves the right to accept or reject any order. Grainger Part #:5YE30. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- DEFELSKO ULTRASONIC COUPLANT Couplant,4 Oz,PK12 - Couplant,4 Oz,PK12. DEFELSKO ULTRASONIC COUPLANT. Governing Law; Limitations. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- OK MACHINE & TOOL CORP KB22 Speed Wrap Bit 22 AWG Standard, 3" - OK MACHINE & TOOL CORP KB22 Speed Wrap Bit 22 AWG. In Like New Condition. FAST SHIPPING! Thanks for your interest. Please check out my other items. I combine shipping! 1122-0500
- OK MACHINE & TOOL CORP WB-28SHM Speed Wrap Bit 28 AWG 3" Mod. NEW - In Like New Condition.
- OK MACHINE & TOOL CORP KB26 Speed Wrap Bit 26 AWG Standard, 3" - OK MACHINE & TOOL CORP KB26 Speed Wrap Bit 26 AWG. In Like New Condition. FAST SHIPPING! Thanks for your interest. Please check out my other items. I combine shipping! 1122-0500
- OK MACHINE & TOOL CORP KB24 Speed Wrap Bit 24 AWG Standard, 3" - OK MACHINE & TOOL CORP KB24 Speed Wrap Bit 24 AWG. In Like New Condition. FAST SHIPPING! Thanks for your interest. Please check out my other items. I combine shipping! 1122-0500
- NH3G 50W Smart CNC Drilling Machine Glasses Rimless Punching Machine 220V - Power: 50W. - Speed: Drilling 0 - 5000 RPM. - Drilling Bits eccentricity 'tolerance: 0.03mm The. - Suction force Clutch (Max.). Clamping capacity of the clamp: = 0.7kg. - of the encoder: less than 0.07mm Resolution.
- DF-8 Handheld Enameled Wire Stripping Peeling Machine stripper Cutter 12500RPM - Pro DF-8 handheld Magnet wire Stripping Machine / stripper Cutter 110V. Output Speed. Your satis faction is our ultimate goal. length 5 ~ 50mm. 0.3 ~ 2.5mm.
- 22/22.5mm Chrome Cap Buster 1260 LTI Tools 1260 0 - 22/22.5mm Chrome Cap Buster Dual flip 1/2 drive socket design . Works on Chrysler and Dodge 21mm chrome cap lugnuts . These lugnuts become easily distorted due to improper leverage using the factory supplied tire iron . Removing over-torqued lugnuts during extreme cold/heat also distorts lugnut cap . Use this dedicated socket every time you remove 21mm lugnuts 1260.
- Bead Wedge 20397 ESCO 20397 0 - Bead Wedge BackProduct Details: Bead Wedge 20397.
- Super Golden Buddy Tire Changing System 71055 AME International 71055 0 - Super Golden Buddy Tire Changing System Demount and Mount tool assembly to for super singles 215 to 445. Will remove both top and bottom beads. Includes bead saver. Heavy duty steel construction. Nylon rollers protect the bead. Sold as a complete set. Weight: 28 lbs. (12.7 kg) 71055.
- Valve Stem and Core Removers 51070 AME International 51070 0 - Valve Stem and Core Removers for quick removal of valve stems and for seating newly installed valve stems. Heavy Duty Polymer to resist scratching alloy wheels 51070.
- 5.7IN Long Valve Core Tool 15190 Lisle 15190 0 - 5.7IN Long Valve Core Tool Heat-treated steel tip for removing and installing standard valve cores. A dual durometer handle for comfort with a rotating knob on the end allowing the tool to turn smoothly while applying pressure with the palm of your hand. The 5.7IN long tool can reach valve stems on the inner dual wheels. Includes a handy pocket clip 15190.
- NH3G Smart CNC Drilling Machine Glasses Rimless Punching Machine 220V 50W - Power: 50W. - Speed: Drilling 0 - 5000 RPM. - Drilling Bits eccentricity 'tolerance: 0.03mm The. - Suction force Clutch (Max.). Clamping capacity of the clamp: = 0.7kg. - of the encoder: less than 0.07mm Resolution.
- Outboard Motor Cover 20-30 HP, Full Outboard Engine Cover, 600D Waterproof Black - Specification Color: Black Style: Modern Condition: New Material: 600D Oxford Cloth Vehicle Service Type: Boat Applicable Outboard Motor: 20-30HP Cover Circumference: 1.65m/ 5.41ft Cover Height: 1.37m/ 4.49ft Package Size: 20*20*5cm/ 7.87*7.87*1.97in Net Weight: 0.4kg/ 0.882lbs Gross Weight: 0.45kg/ 0.992lbs Package Included 1* Outboard Motor Cover 1* Storage Bag.
- Manual Wire Cable Stripping Peeling Machine Scrap Stripper Metal Recycle Tools - Product parameters: Package size: 6.00 x 15.00 x 6.00cm (2.36 * 5.91 * 2.36inch) Gross weight: 1.8kg (3.97lb) Applicable wire range: 1-32mm (10.03-1.26inch) Applicable materials: waste wire, single core wire, loose wire, armored flat wire, etc. features: 1. Using multiple turrets, multiple wires can be operated at the same time 2. The screw is fixed firmly and durable, easy to disassemble and assemble, and the whole machine is not easy to be scrapped 3. Not all wires will run automatically. The ones with small resistance and hard wire will do. 4. The frame is not loose and has high strength The shaft and side plate hole have no wear and long service life 5. Bearing capacity of body material: 3.5t Packing list: Stripping machine + blade * 3 + small wrench * 2 + screw accessorie.
- MONOPRICE 133 Patch Cord,Cat 5e,Booted,White,3.0 ft. - MONOPRICE 133. Patch Cord,Cat 5e,Booted,White,3.0 ft. Voice and Data Patch Cord. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Southwire MM01 Marksman Conduit Spacer - The Marksman conduit layout tool is constructed of tough, durable anodized aluminum. It's markings are etched for maximum durability. This conduit layout tool will pinpoint a center knockout in seconds.
- Wire Stripper Pliers 5in1 Multi Tool Crimper Cable Cutter Reamer Comfort Grip - These pliers combine the features of several tools in one compact design. Wire Stripper Pliers 5in1 Multi Tool Features We promise we can make you happy if you give us a fair chance. All efforts have been made to reproduce accurate colors, however variations in color may occur due to different computer monitor types and photography.
- Jonard Tools EPD-91461 Manual Punchdown Tool with 110 & 66 Blade - Jonard Tools EPD-91461 Manual Punchdown Tool with 110 & 66 Blade.
- New No Clean Soldering Pen & Solder Braided Tape Set For Electronics Welding Hot
- New No Clean Soldering Pen & Solder Braided Tape Set For Electronics Welding Hot
- HIOKI (Hioki Electric) AC clamp meter 3280-10F
- Platinum Tools 100061 EXO Crimp Frame with EXO-EX Die NEW - The ezEX-RJ45 connectors are an RJ45 pass through connector, developed for larger cables and conductors. PLATINUM TOOLS.
- Hastings 8106 Fixed Length Shotgun Stick (6 ft 6") With External Operating Rod
- 10 Pack IC Extractor for Removing ICs and Components from DIP Sockets, Sturdy... - These convenient IC extractor tools remove all types of ICs and components from DIP sockets without bending pins. Sturdy steel construction.
- Electrician Phones, Continuity Test Phones, Loop Check, Journeyman Electrician - Continuity Test Phones -. Continuity Test Phones. 12V battery and carrying bag included! -On/off switch. -Multiple color choices. -Bright LED indicator light. -Soldered joints. -6Ft. Leads.
- Electrician Phones, Continuity Test Phones, Loop Check, Journeyman Electrician - Continuity Test Phones -. Continuity Test Phones. 12V battery and carrying bag included! -On/off switch. -Multiple color choices. -Bright LED indicator light. -Soldered joints. -6Ft. Leads.
- No Clean Soldering Pen and Solder Braided Tape Set for Electronics Welding
- Bar Air Manometer 13mm 1/4 BSP Gewinde Double Scale für Luftkompressor ❤.ac Qo - Easy to read dial. Material: Plastic shell. 1 x Compressor Gauge.
- Cable Stripper Blade Cut Replacement Tool For Wire Stripping Machine HXSMS-25 - Product description: ★The stripping blade is made of high-quality alloy, with an outer diameter of 49.5 mm, an inner diameter of 28 mm, and a thickness of 15 mm. Compared with ordinary steel blades, it has higher hardness and longer service life. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness. It is processed with advanced precision grinder processing equipment to ensure its accuracy. ★The blade of the cable stripper becomes hard, so it can keep sharp for a long time. It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. ★Enhanced trimming and high temperature quenching can effectively reduce the loss of the blade and extend the service life. The peeling is fast, smooth.
- Anti-Static ESD Soldering Mat Roll Rubber Grounding Mat Electronics Working Mat - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Large Anti-Static Heat Insulation 300℃ Rubber Repair Work Mat For Phone PC - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Anti Static Soldering Mat ESD Safe Mats High Temperature Table Workbench Pad - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Anti-Static High Temperature ESD Soldering Mat Roll For Workstation Electronic - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Anti Static ESD Heat Resistant Table Mat 23*118in Phone PC Tablet Tech Repair - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Green 2 Layers 2mm Thick Anti-Static Rubber Sheet Anti-Static Mat ESD Mat - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Blue Green Anti-Static ESD Rubber Table Floor Mat 118" x 23" For Workbench - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Anti-static ESD Rubber Table Mat Garage Flooring Mat Flooring Mats Workshop Pad - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Anti-Static Table Mat In Rubber ESD Mat Microelectronic Maintenance Table Mats - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Green Color 0.6m x 3m Anti Static Table Mat ESD Mats Anti-Static Rubber Mats - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Anti-static Mat Thickness 2Mm Rubber Anti-Static ESD Table Mat For Phone Repair - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- ESD Mat Industrial Clean Room Anti-Static Desk Anti Static Table Mats Roll - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- ESD Table Desk Floor Mat Roll Sheet Anti-Static Mat ESD Safe For Electronic - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Anti Static Matting Anti-Static Flooring ESD Double Rubber Table Mat Work Pad - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- High Temperature ESD Matting Roll Anti Static Table Mat ESD Rubber Mat 0.6*3m - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- High Quality Floor Mat Rubber Bench Anti-static ESD Mat For Electronic Productio - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- ESD Flooring Mat Insulation Composite Anti-Static Rubber Sheet For Electronic - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Anti Static Rubber ESD Flooring Matting Soldering Mat Roll Rubber Grounding Mat - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Anti-Static Table Top Mat Rubber Mat Electric Heat-Conducting Rubber Mats 2mm - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- 0.6*3m Anti Static Floor ESD Table Rubber Roll Grounding Mat For Workshop - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- 2mm 2 Layers Green Anti-Static Rubber ESD Mat Roll For Electronics Production - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Rubber Anti Static ESD Hi-Temperature Soldering Mat Discharge Protection Pad - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Anti Static ESD Mat High Temperature Rubber Table Mat 23*118in Green Black - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Double Rubber Matting ESD Anti-Static Electronic Components Ground Zero Mat - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Anti Static ESD Mat For Circuit Phone PC Tablet Repair Discharge Protection - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- 0.6*3m Anti Static ESD Heat Insulation Work Mat For Phone PC Tablet Repair - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Anti Static ESD Heat Resistant Grounding Mat 0.6*3m/ 23*118in For Phone Repair - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- ESD Anti Static Heat Resistant Table Mat 0.6*3m For Tech Repair & Soldering - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- American Casting & Manufacturing "Lite Wate" Seal Plate Press Vintage - American Casting & Manufacturing "Lite Wate" Seal Plate Press Vintage.
- Power Probe Car Electric Circuit Tester Short Open Finder Tester Checker Tools - Pierce and clamp the cable with the thread, free your hands. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Color:Yellow+Black.
- Roll 118"x23" ESD Anti Static Heat Resistant Table Mat Tech Repair & Soldering - Description If you work with parts that are sensitive to electrostatic discharge, then an anti-static mat will be essential. Our ESD anti-static mat has great performance to keep you away from static buildup and help you do your job better! Application It is suitable for electronic semiconductor devices, electronic computers, electronic communication equipment, integrated circuits, and other microelectronic maintenance table mats and floor mats.
- Lot of 5 - Cooper Wiring G-TOOL-L Multi-Gang Installation Tool, Part #5175286 - Lot of 5 - Cooper Wiring G-TOOL-L Multi-Gang Installation Tool, Part #5175286.
- HIOKI Digital multimeter DT4224 Most Function General purpose NEW F/S - ■ Condition : New.
- Sperry Volt Check Voltage and Continuity Tester VC61000 - VC61000 - NEW SEALED.
- Gardner Bender GST-55M Circuit Alert Wire Stripper - Plier nose for gripping and pulling. Stainless steel body for maximum corrosion resistance. Double bevel cutting blades for superior nick resistance. Easy-to-read stamped markings. Dual gripping positions for traditional or forward hand positions.
- Gardner Bender GBP-60N ArmorEdge Long Nose Curved Handle Wire Stripper, 8" - Cushion Grip Handles: Yes. Designed to strip and cut solid and stranded wire. Maximum Wire Size: 12". Cuts and rethreads bolt sizes 6-32 and 8-32. Strip 10-18 AWG solid and 12-20 stranded wire.
- Gardner Bender GBIK-4 Split Bolt 8-4 AWG, Copper - Wire size: 8-4 AWG. Copper split bolt. Color: Copper.
- WINTERS PFQ1275 Pressure Gauge,4" Dial Size,Silver - WINTERS PFQ1275. Pressure Gauge,4" Dial Size,Silver. Grainger reserves the right to accept or reject any order. Power adapters and other modifications may be necessary for proper operation in other countries.
- Digital Car Circuit Scanner Diagnostic Tool Track Cable Truck Wire Break Tester - It is designed to identify and trace-wires or cables-without damaging the insulation. It also can be used in checking short circuit, locating open circuit, wire tracing, wire identification and more.
- ALLOSUN Automotive Cable Wire Tracker Car Tracer Finder Test Short & Open DC 6~4 - Diagnose and judge the break point from Slight Change of the continuous audio signal from receiver. Transmitter and receiver LEDs show open or short circuit conditions. Widely applied in Checking Short Circuit, Locating Open Circuit, Wire Tracing, Wire Identification etc.
- Reinforced Steel Bar Cutter Electric Hydraulic Steel Bar Cutting Machine 4-25mm - Reinforced Steel bar cutter Portable Electric Hy draulic steel bar cutting machine Rebar Steel cutting Construction tools 4-25mm.
- 7-Way Trailer Plug Tester (1 per pack) - Test your 7-way trailer plug with this tester from the seat of your cab. Each LED on tool is labeled for function and number. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Mechanical Indent Crimp Tool, 8-2 Ga. (1 per pack) - A good tool for bench crimping. Tool can easily be operated while resting head on work bench. Has 4 rotating dies to match your wire size between 8-2 gauge. Made of steel for durability. Weighs 6 lbs.
- SnapOn/BluePoint 1/4" Drive Flexible Adjusting Tool 21", TM-65 - Small orders are no problem. Your Best Work Starts Here™. Lot# BY167 3.3.
- MAC Tools 1/4" Drive Carburetor Flexible Adjusting Tool 21", FD4 - Model: FD4. Small orders are no problem. Your Best Work Starts Here™. Be sure to add us to yourfavorites list ! Lot# BY168 3.3.
- GRAINGER APPROVED V111 1-1/2Y Conduit Strap Clamp,Steel,PK10 - GRAINGER APPROVED V111 1-1/2Y. Conduit Strap Clamp,Steel,PK10. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAP9. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Wire Stripper Pliers 5in1 Multi Tool Crimper Cable Cutter Reamer Comfort Grip - These pliers combine the features of several tools in one compact design. Wire Stripper Pliers 5in1 Multi Tool Features We promise we can make you happy if you give us a fair chance. All efforts have been made to reproduce accurate colors, however variations in color may occur due to different computer monitor types and photography.
- New SWT508-HT2 Computer Sheathed Cable Wire Stripping Cutting Peeling Machine BI - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- 2 Pcs Ferrule Removal Tool Olive Puller Compression Sleeve Puller Olive Remover - 2 x Olive pullers. Weight: 1.17 lb. Manufacturer Part Number -Puller-0043. Country of Origin China.
- Scrap Cable Stripper Automatic Electric Wire Stripping Machine Copper Recycling - Specifications: Material: Steel Color: Black Stripping Range: 1-20mm / 0.04-0.79in Machine Total Height: 120mm / 4.7in Machine Total Width: 160mm / 6.3in Steel Cutter Length: 100mm / 3.9in Machine Weight: 1381g / 3.0lb Steel Cutter Weight: 19g / 0.7ounce Package Size: 170 * 145 * 60mm / 6.7 * 5.7 * 2.4in Package Weight: 1479g / 3.3lb Package List: 1 * Wire Stripping Machine 1 * Extra Cutter.
- ETCON LT130 LAMP/VOLTAGE TESTER with Leather Case - ETCON LT130 LAMP/VOLTAGE TESTER with Leather Case.
- No Clean Soldering Pen and Solder Braided Tape Set for Electronics Welding - High-Quality Material: Our solder wick is made of quality copper wire and precise weaving technology, enhancing tension on the surface to absorb excess solder. The solder remover wick features good thermal conductivity and absorption, reducing the risk of thermal injury to circuit boards.
- No Clean Soldering Pen and Solder Braided Tape Set for Electronics Welding - High-Quality Material: Our solder wick is made of quality copper wire and precise weaving technology, enhancing tension on the surface to absorb excess solder. The solder remover wick features good thermal conductivity and absorption, reducing the risk of thermal injury to circuit boards.
- NEW Greenlee 0151-09D 9" High Leverage Side Cutting Lineman Pliers - WE WILL MAKE EVERY REASONABLE EFFORT TO ACCOMMODATE.
- Lot of 2 Vintage Voltmeters for the Collector - Lot of 2 Vintage Voltmeters for the Collector. These are estate finds, untested. This estate had a large number of vintage electronics, most of which have turned out to be in working order. These voltmeters are in fair to good vintage condition, see pictures and feel free to contact me with any questions.
- Southwire M400TP Professional Data Cable Mapper 58744840 Southwire 58744840 - Professional Data cable mapper. Quickly tests twisted pair data cable for common wiring faults including split pairs, even sends tone. Built to last with a double molded housing and silicone port covers as well as a backlit LCD (liquid crystal display) screen. Port cover protects RJ45 port from dust and debris. Built in tone generator for cable tracing (separate amplifier probe required). Rugged double-molded housing with snap-in remote. Type: .AC Voltage: 55V AC .DC Voltage: 60V DC .Power Source: (2) AAA 1.5V Batteries .
- 5 B-Line Steel Strut Mounting Clamps Straps For 1-1/4" Pipe/Rigid Conduit B2011 - Capacity: 1-1/4" Rigid conduit or pipe. 5 B-Line #B2011 1-1/4" rigid pipe strut/strap fittings. Features include Design load: 600 Lbs. Lateral/75 Lbs. Machine screw and square nut included. (SKU # BLB2011-5PK; Weight: 0.9000 lbs.).
- BES Manufacturing Magnetic Universal Fish Finder FIB213 - This magnetic fish finder is used to locate fish rods and ball chains within walls and direct them to an opening. (SKU # BESFIB213-EA; Weight: 0.0500 lbs.).
- Siecor 2104272-01 Single Fiber UniCam Connector Installation Tool - Broken Post - Siecor 2104272-01 Single Fiber UniCam Connector Installation Tool - Broken Post/Hinge. Untested.
- Siecor 2104272-01 Single Fiber UniCam Connector Installation Tool - Untested - Siecor 2104272-01 Single Fiber UniCam Connector Installation Tool - Untested.
- 1 x New for HART 140-Piece 1/4 and 3/8-inch Mechanics Tool Set Chrome Finish - The HART 140 Pc. The quick release provides superior socket hold while the easy-release button and the reverse lever allows for the changing of sockets or working direction to be quick and easy while being done with one hand.
- Multifunctional Wire Crimping Clamp Tools for XH2.54 XH2.5 PH2.0OR - A designated quick release lever can open the jaws in any position. The ratchet function allows for fixing when the wire is inserted into the crimper.
- Wire Cable Scrap Blade Stripper Stripping Machine Blade Tool Replacement - It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. 1X spare blade for wire stripper. Compared with ordinary steel blades, it has higher hardness and longer service life.
- "Sanwa (Nibra) Keystone Cutter PN201-0 - Since "Nibra" is marked on the case with magic, we will set it a little cheaper.
- Portable Powered Electric Wire Stripping Machine 1-20mm Cable Stripper New - Manual Wire Cable Stripping Peeling Machine Scrap Stripper for 1-20mm Wire USA. Can be operated by one person or two person to improve stripping efficiency and output. Stripping range: 1-20mm / 0.04-0.79in.
- Manual Cable&Wire Stripping Machine 1-20 mm Portable Scrap Cable Stripper Tool - Characteristic: Stripping fixture. 1 X Stripping machine. Clamp material: Bearing steel. Style: Stripped of used wire and cable. Handle materia: Iron. The cutter head is a fragile accessory. The cutter head can be sharped with a sharpening stone.
- Hydraulic Busbar Bender 0-90° 16 Tons 6in Iron,Copper,Aluminum Metal Bender SALE - Specification Model: CB-150D Connector Model: ZG 3/8'' Color: Black, Yellow Material: Iron Style: Modern Output Force: 16T/35273lbs Bending Object: Iron, Copper, Aluminum Bending Angle: 0-90° Product Size: 360*240mm/14.1*9.4inch Gross Weight: 18kg/39.68lbs Package Size: 19*29*41cm/7.4*11.4*16.1inch Package Included 1* Hydraulic Busbar 6 inch Blade .
- Southwire 2 In. Conduit Fitting & Reaming Screwdriver 58283740 Southwire - This heavy-duty, hard-pointed awl, scribes metal, starts screw holes, and performs a variety of piercing and punching jobs. De-burs thin wall conduit with speed and ease. Removable reaming head can be removed and used with a power drill. Perfectly reams and smooths 1/2 In., 3/4 In., and 1 In. thin-wall conduit ends to protect wire and and permit correct installation of fittings. Reams inside and outside of conduit simultaneously. Comfortable cushioned grip allows a firm grip and greater torque. Reaming head can be removed and used with a power drill. Tip Size(s): 2 In. .Shank Length: 7.5 In. .Overall Length: 7.5 In.
- Klein Tools 85091 Power Conduit Reamer for 1/2" 3/4" & 1" Conduit - Klein Tools 85091 Power Conduit Reamer for 1/2" 3/4" & 1" Conduit.
- Astro Insertion Tool Lot of 3 M81969/17-03 17-04 17-05 - This is a Lot of 3 Astro Insertion Tools. M81969 17-03 17-04 17-05. Great for adding to your outfit. See lots of photos of what you are getting.
- Wire stripper disasember germany F21 - Wire stripper disasember germany F21. High quality tool. With clip (pen type) Sold as it is, with signs of wear and age so,no returns expected.please check all pics.Any question , please ask. EUROPE please
- Ok Industries Wire Wrapping Bit KB18 - NEW - Ok Industries Wire Wrapping Bit KB18 - NEW.
- Genspeed W7131688 Cable,Cat 6,23 Awg,1000 Ft,Blue - Gems Sensors Fs-200, 26838 1" Fnpt Spdt Liquid Flow Switch 2 To 8 Gpm. Zoro Select M01000.220.0240 Class 8.8, M22-2.50 Hex Head Cap Screw, Black Oxide. Steiner 317-4X6 Welding Blanket,4 Ft. W,6 Ft.,Black.
- (2) Gardner Bender PDT-110LC Punch Down Tool
- ERASER DCFV 1 Magnet & Enamel Wire Stripper - This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the sale. This item is to be used for its intended purpose.
- ERASER IR7000 / IR 7000 Variable Speed Control - This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the sale. This item is to be used for its intended purpose.
- B-Line Zinc-Plated Steel 4-Hole 9/16" Channel Corner Gusset Flat Plate LTD B-137 - B-Line #B-137 4-hole channel corner gusset flat plate. Made of zinc-plated steel for long lasting performance. Features a slotted angle and a hot rolled pickled oiled process. Features include Zinc electroplated finish.
- #EF-33H Automotive Flashers (1 per pack) - #EF-33H automotive flashers. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- GRAINGER APPROVED V351Y Tee Plates,Steel - GRAINGER APPROVED V351Y. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAJ2. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V971RY Wing Connector, One-Way,Steel - GRAINGER APPROVED V971RY. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAF3. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED 5DPD8 Steel Slump Cone - GRAINGER APPROVED 5DPD8. Steel Slump Cone. Steel Slump Cone, For Use With H-3636 (5DPD6). Grainger reserves the right to accept or reject any order. Grainger Part #:5DPD8. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- electrical testing tools - Megger MIT525 5KV insulation tester with leads
- Master Lock 411 7-Pc Zenex Thermoplastic Safety Lockout Padlock Red 1-1/2" X 3" - Thermoplastic Safety Padlock. Key retaining - ensures that padlock is not left unlocked. 1-1/2in (38mm) wide 3in (76mm) tall Thermoplastic red body, shackle with 1-1/2in (38mm) clearance. Durable, lightweight, non-conductive Thermoplastic lock body.
- HUBBELL HBL29W81BK Connector,L21-30R,30A,120/208VAC,Black - HUBBELL HBL29W81BK. Connector,L21-30R,30A,120/208VAC,Black. The strain relief nut seals on the body, eliminating areas of debris collection, and provides impact resistance. Unique cone seal prevents dirt and debris from collecting at cable entrance.
- Ideal Tape-Pak Model #31-025 200' X 1/8" Steel Fish Tape -Made in USA- - Ideal Tape-Pak Model #31-025 200' X 1/8" Steel Fish Tape -Made in USA-. Lightly used, in good shape.
- Hastings HV-240 Telescopic Fiberglass Hot Stick 69"- 39'-6" - Everything included is shown in the photos. There is a truck height loading dock at our facility. Local pick up is an option. Handling Cost If there are multiple available for sale you may not receive the one photoed, but they are all in similar condition.
- Vintage NOVA # K7, m/m, French Electricians Conduit Bending Pliers, VGC - The pliers look in very good condition.
- GRAINGER APPROVED FS-500SS ST4 120.00 Strut Channel,SS,Overall L 10ft - GRAINGER APPROVED FS-500SS ST4 120.00. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAL3. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- VESSEL VA line stripper 3200VA-1 Procon NEW - Through all over the world.
- Ideal Industries 45-133B Thermo-Strip Thermal Wire Stripper In Great Condition. - IDEAL INDUSTRIES 45-133B THERMO-STRIP THERMAL WIRE STRIPPER IN GREAT CONDITION..
- 1 x HART 140-Piece 1/4 and 3/8-inch Mechanics Tool Set Chrome Finish New - The HART 140 Pc. The quick release provides superior socket hold while the easy-release button and the reverse lever allows for the changing of sockets or working direction to be quick and easy while being done with one hand.
- Short Open Finder Circuit Detector-Tracker The Cable Wires Circuit Tester 6-42V - You-can quickly locate short circuits, open connections, broken wires. It is designed to identify and trace-wires or cables-without damaging the insulation. It also can be used in checking short circuit, locating open circuit, wire tracing, wire identification and more.
- Hydraulic Busbar Bender 0-90° w/ 6in Straight Blade Bus Bar Bending Tool 16 Tons - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- 16 Ton 6in Hydraulic Busbar Bender Bus Bar Bending Tool for Copper Aluminum Iron - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- 16 Ton 6" Hydraulic Busbar Bender Bus Bar Bending Tool for Copper Aluminum Metal - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- Hydraulic Busbar Bender 16 Ton 6 inch 0-90° Bus Bar Bending Tool Bender CB-150D - 16 Ton Hydraulic Busbar Bender 6"Blade 0-90° Bus Bar Bending Tool Bender CB-150D. Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- Original Drill-Powered Wire Stripper Machine - Manual Wire Stripping Made Easy - With a powerful Ultra-Grip wire feeder that cuts through kinked and twisted wires and cables, you’ll be able to strip wires faster than ever before. Our drill-powered wire stripper is constructed from solid aircraft-grade aluminum alloy, with the drive shaft crafted from heavy-duty steel.
- Hydraulic Busbar Bender 16 Ton 6in Blade 0-90° Bender Bus Bar Bending Tool 150mm - Hydraulic Busbar Bender 16 Ton (6"/150mm Straight Blade) 0-90° Bus Bar Bending Tool CB-150D. ThisHydraulic Busbar Bender is made of high-quality iron, which is strong, durable, and not easy to deform.
- 2.5" Cable Stripper Blade Replace Cutters Electric Copper Wire Stripping Machine - Features: Material: high-strength alloy Outer diameter: 2.5 inches/65 mm Inner diameter: Front: 1.02 inches / 26 mm Back: 1.3 inches / 33mm Blade thickness: 0.59 inches / 15 mm Applicable models: HXSMS-25 and HXSMS-26 The Package Includes: 1x Spare Blade for Wire Stripper.
- Titan Tools 11476 - 3 Piece Mini Electrical Tool Set in Yellow - Titan Tools 11476 - 3 Piece Mini Electrical Tool Set in Yellow (Cutter, Stripper & Crimper).
- GENSPEED W7131688 Data Cable,Cat 6,23 AWG,1000ft,Blue - GENSPEED W7131688. Data Cable,Cat 6,23 AWG,1000ft,Blue. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
- GENSPEED W5136101 Data Cable,Cat 5e,24 AWG,1000ft,Black - GENSPEED W5136101. Data Cable,Cat 5e,24 AWG,1000ft,Black. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
- Ampco Safety Tools W-13 Flange Wedge 2" x 2" x 8" Non-Sparking Non-Magnetic
- AMP Tyco 2-231652-0 Crimp Crimper Wire Strip Modular Network Plug Hand tool - AMP Tyco 2-231652-0 Crimp Crimper Wire Strip Modular Network Plug Hand tool.
- Signal Corps U.S. Army Field Strength Meter model I-95-A, WWII Collectable! - We will not declare a lower value or a COO different than where the item was manufactured. No accessories or other parts are included if they are not listed or pictured. Great condition and includes the front cover.
- CP Techmotive SD25I050MAQ2 Hex Drive 1/4" Inline Screwdriver W/pistol grip - We have, however, described each item to the best of our abilities. If you do not like what you see, that is ok too. COULD DOUBLE AS A SPACE LASER PISTOL . GREAT QUALITY TOOL. NEVER TESTED. REMOVED FROM SERVICE.
- Wheel Weight Balance Hammer Pliers 9507 Astro Pneumatic 9507 0 - Wheel Weight Balance Hammer Pliers 7 -In-1 Design. Hidden Spring Mechanism. Made from Precision Forged CR-V 9507.
- Vector Electric Wire Wrap Tool, model P160-CT-AC - Clean - Vector, Electric Wire Wrap Tool - Clean. We will not declare a lower value or a COO different than where the item was manufactured. While we aim to achieve 100% accuracy, mistakes do happen. No accessories or other parts are included if they are not listed or pictured.
- CP Techmotive SD25I050MAQ2 Hex Drive 1/4" Inline Electric Screwdriver - We have, however, described each item to the best of our abilities. If you do not like what you see, that is ok too. GREAT QUALITY TOOL. NEVER TESTED. REMOVED FROM SERVICE. I DONT HAVE THE POWER OR CABLES TO TEST THEM.
- Vessel (Vessel) Wire Stripper Single track A 3000A - A wire stripper that can quickly remove the coating with one operation. - With strip gauge.
- Vessel Wire Stripper 3500E-2
- Engineer PAD-11 ~ 13 replacement dice PAD-11s - Surprising finish, like a dedicated tool. The pressure finish is beautiful with a high -precision dice. Can be attached to the body of Pad-11, 12, and 13.
- Astro Removal Tool M81969/19-02 - This is an Astro Removal Tool. Adjusts smoothly. Great for adding to your outfit. See lots of photos of what you are getting. Includes the tool and end cap seen above. Nothing else is included.
- Astro Removal Tool M81969/19-11 - This is an Astro Removal Tool. Adjusts smoothly. Great for adding to your outfit. See lots of photos of what you are getting. Includes the tool with one end cap seen above. Nothing else is included.
- Siemens 200 amps Overhead/Underground Meter Socket Grey - . Siemens Amperage. 200 amps Service Feed Type. Overhead/Underground Product Type. Meter Socket Socket Type. Ringless Voltage. 600 volts Volts. 600 volts Assembled Width. 8.7 in. Assembled Depth. 15.8 in. Packaging Type. Pack Assembled Length. 5.5 in. Amps. 200 Amp.
- GRAINGER APPROVED V100 2-1/8Y Conduit Strap Clamp,Steel,Overall L 15in - GRAINGER APPROVED V100 2-1/8Y. Grainger reserves the right to accept or reject any order. Grainger Part #:2HCH5. Conduit Strap Clamp,Steel,Overall L 15in. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- OK INDUSTRIES G200/R3278 Wire Wrap Tool,Green,18-32 AWG,Manual - Manual Wire Wrap Tool, Product Type Wire Wrap Gun, Maximum Wire Capacity 18 AWG, Minimum Wire Capacity 32 AWG, Wrapping Type Regular, Includes Light No, Body Material Lexan, Features Compatible with All Our Wire Wrapping Bits and Sleeves, Durable, Good for Field Service or Production Line Use, Lightweight and More Economical Wire Wrapping Tool, Includes -, Insulated No, Revolutions Per Squeeze 10, Tool Function Wrap, Tool Length 5 1/4 in, Tool Weight 0.61 lb.
- HIOKI LAN cable HiTESTER 3665 used - We mainly handle products for the Japanese market. It may be necessary to replace the plug.
- Automatic Scrap Cable Stripper Electric Wire Stripping Machine Copper Recycling - Can Be Operated by One Person or Two Person to Improve Stripping Efficiency and Output. Stripping Range: 1-20mm / 0.04-0.79in. 1 Wire Stripping Machine. Small and Compact, Easy to Use and Carry. Machine Total Height: 120mm / 4.7in.
- ✨ 110V DF-8 handheld Magnet wire Stripping Machine /stripper Cutter 12500r/min! - DF-8 handheld Magnet wire Stripping Machine /stripper Cutter 110V 12500r/min New. Output Speed. Your satis faction is our ultimate goal. 0.3 ~ 2.5mm.
- Manual Wire Stripping Machine Scrap Cable Stripper Copper Recycling 1-20mm USA - Manual Cable Wire Stripper Copper Wire Stripping Machine Metal Recycle Tool The cutter head is a fragile accessory. It can also be purchased separately. The price is $8 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Package included: 1 X Stripping machine Notice: 1.The color may have different as the difference display,pls understand. 2. Pls allow 1-3mm error due to manual measurement,pls understand.
- Ratchet Crimp Tool for 16-10 Ga. Insulated Flag Connectors (1 per pack) - Ratchet Crimp Tool for 16-10 Ga. Weighs 1.4 lbs. Insulated Flag. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- New 110V DF-8 handheld Magnet wire Stripping Machine /stripper Cutter 12500r/min - DF-8 handheld Magnet wire Stripping Machine /stripper Cutter 110V 12500r/min. Output Speed. Your satis faction is our ultimate goal. length 5 ~ 50mm. 0.3 ~ 2.5mm.
- New 110V DF-8 handheld Magnet wire Stripping Machine /stripper Cutter 12500r/min - DF-8 handheld Magnet wire Stripping Machine /stripper Cutter 110V 12500r/min New. DF-8 handheld Magnet wire Stripping Machine /stripper Cutter 110V 12500r/min. Output Speed. Your satis faction is our ultimate goal.
- Desoutter Angle Head Nutrunner Eral1.5-25 3/8" Drive Dc Electric Power - I HAVE A DESOUTTER ERAL 1.5-25 DC POWERED ANGLE HEAD 3/8" DRIVE NUTRUNNER. We have, however, described each item to the best of our abilities. If you do not like what you see, that is ok too. GREAT QUALITY TOOL.
- Southwire XS-C1 Coax Cutter and Stripper - Southwire XS-C1 Coax Cutter and Stripper. Used them once , and never again, just like used !
- VINTAGE WISS -- J-7 Light Metal Cutting Snips -- Made in USA🇺🇸 Jewelers - Cut good as is but may need sharpening. One handle is slightly higher than the other when closed, but work fine.
- New SWT508-HT2 Computer Sheathed Cable Wire Stripping Cutting Peeling Machine BI - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- ACE Coaxial Cable Crimp Tool & Gardner Bender Compression Tool New In Package!
- Cementex IOWES-11 11 piece insulated electrician wrenches
- VESSEL Wire Stripper No.3500E-1 Peeling Work Wire Cutting Electrical Tools Japan
- Manual Wire Stripping Cable Machine Scrap Stripper Metal Recycle Tool 1-20mm NEW - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Cementex 30150TW38I Torque Wrench - Model: 30150TW38I. Order No: 30150TW38I. Double-Insulated Torque Wrench, tested to 10,000 volts and rated for use up to 1,000 volts AC and 1,500 volts DC. Local pick up is not available.
- StripMeister Automatic Wire Stripping Machine ROMEX 2 Blades Copper Steel New - This wire stripper is your partner for practical and economical wire recycling. Many recyclers of copper wires trust this stripper tool. Efficient Scrap Wire Stripping: This powerful wire stripping machine can handle kinked and twisted cables and wires.
- Cable Stripper Blade Electric Copper Wire Stripping Machine Replacement Cutters - It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. 1X spare blade for wire stripper. Compared with ordinary steel blades, it has higher hardness and longer service life.
- 90W Semi-automatic RJ45 Wire Crimping Machine RJ11 RJ12 Cable Crimper 2P-8P S - Suitable range: 2P - 8P(Customized). Crimping force: 150kg. Power: 90W. The removable corresponding mold is optional, and easy to replace. Model: TD-90W. Weight: 12kg.
- Modern Hydraulic Busbar Bender 0-90° Bending Bus Bar Bending Tool 16 Tons 6" - Quick Connector: The connector of this product is a threaded ZG3/8" quick connector with very tight construction. It can be connected tightly and quickly with the connector on the hydraulic pump. Bending Object: Iron, Copper, Aluminum.
- Jameson Insulated Slotted Electricians Screwdriver Blade 3/16" x 6" USC01890 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
- 90W Semi-automatic RJ45 Wire Crimping Machine RJ11 RJ12 Cable Crimper 2P-8P O - Suitable range: 2P - 8P(Customized). Crimping force: 150kg. Power: 90W. The removable corresponding mold is optional, and easy to replace. Model: TD-90W.
- Manual Wire Cable Stripping Machine Peeling Machine Cable Wire Stripper - (1 Manual Wire Stripper. excluded.).
- 1pcs Manual Wire Cable Stripping Machine Peeling Machine Cable Wire Stripper - (1 Manual Wire Stripper. excluded.).
- ONE Manual Wire Cable Stripping Machine Peeling Machine Cable Wire Stripper - (1 Manual Wire Stripper. excluded.).
- NEW Manual Wire Cable Stripping Machine Peeling Machine Cable Wire Stripper - 1 Manual Wire Stripper. we very glad to solve all problem with you. However, we will try our best to minimize it. Gross Weight: 1.5kg.
- Great Manual Wire Cable Stripping Machine Peeling Machine Cable Wire Stripper - 1 Manual Wire Stripper. Gross Weight: 1.5kg.
- ONE Manual Wire Cable Stripping Machine Peeling Machine Cable Wire Stripper - (1 Manual Wire Stripper. Scrive Knife:White steel knife. Gross Weight: 1.5kg. excluded.). Scope of application: 1～25mm.
- Manual Wire Cable Stripping Machine Peeling Machine Cable Wire Stripper - 1 Manual Wire Stripper. Gross Weight: 1.5kg.
- Manual Wire Cable Stripping Machine Peeling Machine Cable Wire Stripper New - 1 Manual Wire Stripper. Gross Weight: 1.5kg.
- Cementex Double Insulated 6 Piece Wrench Set Very Clean - Cementex Double Insulated 6 Piece Wrench Set Very Clean
- Cementex Double Insulated Box Wrenches 7 Piece Set Open - Ended Wrench
- Jokari 20050 Ergonomic Super 4 Plus Automatic Wire Stripper for Wires from 0.... - Original JOKARI quality Product made in Germany. Adjustable length stopper and a plier handle design with lockable grip.
- Vintage XCELITE MS54 Diagonal Cutter, 4", Green, USA
- Copper Buckle Butt Machine Semi-automatic Silent Copper Strip Machine 250W - Power: 250W. Humanized design, easy to operate. The headphone cable is buckled and the fixed card position is not loose, the apple round wire is wrapped, and the flat wire noodle wire is buckled. The connection between the slide switch and the wire.
- Lead bender tool for forming resitor or capacitor leads Works for many types - Lead bender Great little tool for neatly forming resistors or capacitors.Makes your work look neat and clean.This is made in USA. High quality, impact resistant plastic. This size works for many resistor and capacitor sizes. I’ve used this for 1/2w carbón comp resistors and also 5w cement power resistors.Condition is "New". Ships first class mail.Upgrade to Priority if you want it faster.
- KLEIN TOOLS 450-003 Cable Staples 11/32in x 19/32in Insulated - 300 Pack - NEW - For exclusive use with Klein's Loose Cable Stapler (Cat. No. 450-100). UL listed insulated staples are designed with plastic insulation to protect cable. Fit Klein Tools Loose Cable Stapler (Cat. No. 450-100) exclusively.
- KLEIN TOOLS 450-002 Cable Staples 5/16in x 5/16in Insulated - 300 Pack - NEW - For exclusive use with Klein's Loose Cable Stapler (Cat. No. 450-100). UL listed insulated staples are designed with plastic insulation to protect cable. For sole use with Klein Tools Loose Cable Stapler (Cat. ).
- KLEIN TOOLS 450-001 Cable Staples 1/4in x 5/16in Insulated - 300 Pack - NEW - For exclusive use with Klein's Loose Cable Stapler (Cat. No. 450-100). UL listed insulated staples are designed with plastic insulation to protect cable. For sole use with Klein Tools Loose Cable Stapler (Cat. ).
- New Leviton UTP Telephone Cable Strip Tool Phone Wire Stripper 49660-C Carded - Leviton 49660-C stripping tool. Used for stripping unshielded twisted pair (UTP) cable. (SKU # L49660-C-EA; Weight: 0.1600 lbs.).
- Huskie Tools REC-54GRB Gear Drive Ground Rod Bender - HUSKIE GEAR-DRIVE GROUND ROD BENDER FEATURES. Huskie Tools. Copper Ground Rod up to 5/8 in. Safety Lockout Switch. Weight13.45 lbs.
- Gardner Bender GS-3589 Coaxial Cable Stripper, Black/Red - Grip - precision ground plier nose and coax cable gripping station. Cut - copper, aluminum and copper-coated steel wire. Double bevel cutting blades for superior nick resistance. Cushion Grip Handles: Yes.
- Durable Metering Pump DIY Liquid Damaged Engine Helicoil M6 X 8mm Stripper
- Electrical Connections 2508 Solenoid Connector 200-240VAC/DC *Opened* NWB - Warranty Policy.
- Electrical Connections 008369 2508 Solenoid Connector 200-240V AC/DC NWB - Warranty Policy.
- Electrical Connections 2508 Solenoid Connector 200-240VAC/DC *Opened* NWB
- Electrical Connections 008369 2508 Solenoid Connector 200-240V AC/DC NWB
- SEYMOUR MIDWEST LINK 66004GRA Sledge Hammer Handle,12",Fire,Contractor - SEYMOUR MIDWEST LINK 66004GRA. Diversion contrary to U.S. law is prohibited. Power adapters and other modifications may be necessary for proper operation in other countries. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- Klein Tools 85091 Power Conduit Reamer
- 574L Linemen Staple Stick - Holds 10 staples. Slots are 1/8″ W x 1″ L.
- Morse 1/2-13Nc Gh11 Hss 350530 - This item is:_____________MORSE 1/2-13NC GH11 HSS 350530_____________________________________________________ This item is new, however, it may have scratches and marks from handling. See photos. Most boxes have been opened for inspection and photos.
- Klein Tools® 6-in-1 Multi-Purpose Wire Stripping & Cutting Tool - This item is:___________Klein Tools® 6-in-1 Multi-Purpose Wire Stripping & Cutting Tool_______________________________________________________ This item is new, however, it may have scratches and marks from handling.
- 35W Manual Wire Cable crimping machine and peeling Machine Stripper Stripping - 1 set of Wire Cable Crimping Machine. Easily connects to drill for automatic wire stripping or use Handle for manual stripping. This machine is automatic Wire Stripping Machine, Which uses drill or handle to strip scrap copper wire.
- Manual Wire Stripping Machine Scrap Cable Stripper Scrap Copper Recycle 1-20mm - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Cementex 1000V Insulated 4 Piece Open End Wrench Set Free Shipping - 1/2 OEW-16.
- GREENLEE 45058 Power Talk 2000 Telephone Line Communication New Warehouse Stock - GREENLEE 45058 Power Talk 2000 Telephone Line Communication New Warehouse Stock.
- BURNDY KA31U MechConn,Aluminum,3/8 in,Hex - BURNDY KA31U. It features aluminum alloy construction. Power adapters and other modifications may be necessary for proper operation in other countries. Grainger reserves the right to accept or reject any order.
- ^^ Ok Wire Wrap Tool- Model Ew-8 Bf (Tgx68) - No accessories including standard power cord/cable. POWERS UP! We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided.
- Ideal Industries Blue Coaxial Cable Stripper, 1/4" to 9/16" Cutting Diameter - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- LB-1195 - Wire-Stop For Custom Stripmaster Lite - (Pack of 1) - IDEAL #LB-1195 - Wire-Stop For Custom Stripmaster Lite. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Ideal 22-10 Ga. Wire Stripper Tool (1 per pack) - Ideal 45-092 wire stripper requires 1/3 less hand pressure than a traditional stripping tool. Knife type blades are die cast and replaceable. Eliminates nicking, cutting and fraying of wire with its clean strip.
- 3-pc SUV/LT Spline Plus Kit 68025 AME International 68025 843198105115 - 3-pc SUV/LT Spline Plus Kit Works in cases of corrosion, rounded lug heads, thin walls for specialty aluminum wheels, etc. Works on at least 6 different fastener types: Spline, 6-Point, 12-Point, Star, Square, 50% Rounded Off Heads. Manufactured using quality Chrome Molybdenum alloy steel for hightorque nd durability. Color-coded protective sleeves for easy identification which helps to prevent damage to custom wheels. rated 68025.
- 50pcs Metal Cutting Discs - Quantity: 50pcs. Wear-resistant ultra-thin cutting piece, no broken edge and low dissipation for processed materials. Made of high quality fiber, more sharp and durable. Made of low loss materials with a sharp blade, in good shape and without broken edges.
- SWT508C-II Computer Stripping Machine Automatic Cable and Wire Stripping Machine
- B-Line 1/2" Zinc Plated Steel EMT Conduit Strap Pipe Clamp Fitting No Bolt B2001 - B-Line #B2001 EMT conduit strut strap pipe clamp fitting. Made of zinc electroplated steel for long lasting durability. Features a square nut, slotted hex head machine screw. Features include Zinc electroplated steel.
- 2 Pcs Ferrule Removal Tool Olive Puller Compression Sleeve Puller Olive Remover - 2 x Olive pullers. we're a little working hard for giving the higher quality service possible and our goal is to give to you the best service possible. Material: solid brass. NOTE: After a order placed our system will send automatically the request to the warehouses and will be not possible to cancel.
- Conduit Scoring Tool for 1/2 in. 3/4 in. and 1 inch EMT Easy Replaceable Wheels - Replaceable scoring wheels also available for 1/2" & 3/4" EMT (Cat. No. 88907) and 1" EMT (Cat. No. 88908). Conduit Scoring Tool for 1/2 in. Conduit Scorer scores 1/2 in., 3/4 in. EMT conduits. Compact, enclosed design for use on job sites.
- Facom r.400 AVSE 10 pcs 1/4 inch insulated socket set, 6 point, 1000V - Facom r.400 AVSE 10 pcs 1/4 inch insulated socket set, 6 point, 1000V.
- Genesis GLSD08B 8-Volt Li-Ion 2-Speed Cordless Screwdriver - • Ideal for cordless drilling and screwdriving;• 1/4 in. Height: 2.10".
- IDEAL 33-632 LinearX3 Compression Tool - • Linear stroke for consistent compression results & easy operations ;• 4 RTQ(TM) F-connectors ;• Adjustable for F/BNC/RCA ;• Durable & rugged zinc die-cast body ;• Made in the USA of US & global components ;• Includes 4 RTQ(TM) RG6 F-connectors;.
- IDEAL 33-507 Feed-Thru RJ-45 Installation Kit - • Tool installation kit for terminating RJ-45 modular plugs to twisted pair cable;• Crimps standard, Feed-Thru and shielded CAT5e, CAT6 and CAT6A modular plugs;• Spare slot in pouch to hold 35-485 Punch Down Tool;• Includes FT-45(TM) Feed-Thru Modular Plug Crimp Tool (30-495), PrepPRO(R) stripper (45-605), scissors (35-088) and pouch with clip;Length: 10.00"Width: 6.15"Height: 3.75"
- Wood Shelf 3Pcs Wall Mounted Floating Shelves Home Funiture Gift Book Display US - 3Pcs Wall Mounted Floating Shelves Description： 3xWall Mounted Floating Shelves A set of fine workmanship, beautiful modern wall shelves, easy to hang, through a variety of positioning methods, match your home . Specification: Material: wood Color：white Shape: Hexagon Diagonal * Width * Depth: 30*15*9.2cm;24*12*9.2cm;18*9*9.2cm Features: 1. High-quality baking paint treatment 2. High Density Environmental Protection Sheet 3.Comfort in use, seamless installation Package Included: 3pcs Wall Shelves Note: Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding. Due to different producing batches, product details might be a little different. If you minding the difference, please buy it carefully.
- Cable Stripper Blade Cut Replacement Tool for Copper Stripping Machine H8O3 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Replacement Blade for Copper Wire Stripping Machine Powered Cable Strip J0T0 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. After being driven by an external hand drill, it can be changed to an electric wire stripping machine to increase wire stripping capacity.
- Cable Stripper Replacement Blade Cutter for Wire Stripping Machine G2V6 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Replacement Blade For Copper Wire Stripping Machine Cable Stripper Cutters Z8D1 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Cable Stripper Blade Cut Replacement Tool for Copper Stripping Machine V8N2 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Cable Stripper Copper Wire Stripping Machine Blade Cutter Replacement C9A9 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Replacement Blade for Copper Wire Stripping Machine Powered Cable Strip U2G3 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. After being driven by an external hand drill, it can be changed to an electric wire stripping machine to increase wire stripping capacity.
- Replacement Blade For Copper Wire Stripping Tool Cable Cutters Tool N0I6 - After being driven by an external hand drill, it can be changed to an electric wire stripping machine to increase wire stripping capacity. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Cable Stripper Replacement Blade Cutter for Wire Stripping Machine C1P9 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Replacement Blade for Copper Wire Stripping Machine Powered Cable Cutter C3J1 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. After being driven by an external hand drill, it can be changed to an electric wire stripping machine to increase wire stripping capacity.
- Replacement Blade For Copper Wire Stripping Machine Cable Stripper Cutters O6K6 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Cable Stripper Blade Cut Replacement Tool for Copper Stripping Machine Q4H4 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Cable Stripper Copper Wire Stripping Machine Blade Cutter Replacement N8G3 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Replacement Blade for Copper Wire Stripping Machine Powered Cable Strip Q0R4 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. After being driven by an external hand drill, it can be changed to an electric wire stripping machine to increase wire stripping capacity.
- Replacement Blade For Copper Wire Stripping Tool Cable Cutters Tool Z7U8 - After being driven by an external hand drill, it can be changed to an electric wire stripping machine to increase wire stripping capacity. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Cable Stripper Replacement Blade Cutter for Wire Stripping Machine O6S1 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Replacement Blade for Copper Wire Stripping Machine Powered Cable Cutter F0A8 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. After being driven by an external hand drill, it can be changed to an electric wire stripping machine to increase wire stripping capacity.
- Replacement Blade For Copper Wire Stripping Machine Cable Stripper Cutters J9U0 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Replacement Blade for Copper Wire Stripping Tool Cable Stripper Cutters A4V8 - This product is suitable for household wires, soft wires, scatted wires, cable lines and so on. You can use it as a manual wire stripper or connect to the electric drill to use as an electric wire stripping tool.
- Cable Stripper Blade Cut Replacement Tool for Copper Stripping Machine G4S5 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Cable Stripper Copper Wire Stripping Machine Blade Cutter Replacement C4U1 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Replacement Blade for Copper Wire Stripping Machine Powered Cable Strip R7F9 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. After being driven by an external hand drill, it can be changed to an electric wire stripping machine to increase wire stripping capacity.
- Replacement Blade For Copper Wire Stripping Tool Cable Cutters Tool Y3J9 - After being driven by an external hand drill, it can be changed to an electric wire stripping machine to increase wire stripping capacity. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Cable Stripper Replacement Blade Cutter for Wire Stripping Machine F7T7 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Replacement Blade for Copper Wire Stripping Machine Powered Cable Cutter B5T8 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. After being driven by an external hand drill, it can be changed to an electric wire stripping machine to increase wire stripping capacity.
- Replacement Blade For Copper Wire Stripping Machine Cable Stripper Cutters W5P7 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Replacement Blade for Copper Wire Stripping Tool Cable Stripper Cutters S9Q9 - This product is suitable for household wires, soft wires, scatted wires, cable lines and so on. You can use it as a manual wire stripper or connect to the electric drill to use as an electric wire stripping tool.
- Cable Stripper Blade Cut Replacement Tool for Copper Stripping Machine R9C2 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Replacement Blade for Copper Wire Stripping Machine Powered Cable Strip G7Y6 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. After being driven by an external hand drill, it can be changed to an electric wire stripping machine to increase wire stripping capacity.
- Cable Stripper Replacement Blade Cutter for Wire Stripping Machine K4N0 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Replacement Blade for Copper Wire Stripping Machine Powered Cable Cutter J5J3 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. After being driven by an external hand drill, it can be changed to an electric wire stripping machine to increase wire stripping capacity.
- Replacement Blade For Copper Wire Stripping Machine Cable Stripper Cutters T2J8 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Replacement Blade for Copper Wire Stripping Tool Cable Stripper Cutters S9O0 - This product is suitable for household wires, soft wires, scatted wires, cable lines and so on. You can use it as a manual wire stripper or connect to the electric drill to use as an electric wire stripping tool.
- Cable Stripper Blade Cut Replacement Tool for Copper Stripping Machine P5V7 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Cable Stripper Copper Wire Stripping Machine Blade Cutter Replacement O1A7 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Replacement Blade for Copper Wire Stripping Machine Powered Cable Strip U9V8 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. After being driven by an external hand drill, it can be changed to an electric wire stripping machine to increase wire stripping capacity.
- Replacement Blade For Copper Wire Stripping Tool Cable Cutters Tool A0M5 - After being driven by an external hand drill, it can be changed to an electric wire stripping machine to increase wire stripping capacity. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Cable Stripper Replacement Blade Cutter for Wire Stripping Machine M6R4 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Replacement Blade for Copper Wire Stripping Machine Powered Cable Cutter O3P1 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. After being driven by an external hand drill, it can be changed to an electric wire stripping machine to increase wire stripping capacity.
- Replacement Blade For Copper Wire Stripping Machine Cable Stripper Cutters V3B8 - The splint can be fixed with screws, you can fix it on the corner of the table and the machine will be more stable for you to use. This product is suitable for household wires, soft wires, scatted wires, cable lines and so on.
- Replacement Blade for Copper Wire Stripping Tool Cable Stripper Cutters Z7F3 - This product is suitable for household wires, soft wires, scatted wires, cable lines and so on. You can use it as a manual wire stripper or connect to the electric drill to use as an electric wire stripping tool.
- Replacement Blade for Copper Wire Stripping Tool Cable Stripper Cutters E0E8 - This product is suitable for household wires, soft wires, scatted wires, cable lines and so on. You can use it as a manual wire stripper or connect to the electric drill to use as an electric wire stripping tool.
- KLIEN-TOOL 1613-30B Line Puller.kleins Chicago grip - KLIEN-TOOL 1613-30B Line Puller.kleins Chicago grip. SELLS IN GOOD USED CONDITION PLEASE VIEW THE PHOTOS
- Carol Cr6.30.02 Cable,Cat 6,23 Awg,1000 Ft,White - Hubbell Wiring Device-Kellems Ig2810 30A Isolated Ground Locking Receptacle 4P. Zoro Select P21s-Ry080kp-16-Wb-Dl Plate Caster,600 Lb. Load,Black Wheel. Light Industrial. & Recepticles. Electrical Outlets.
- Everhard Roller, Used - Everhard. Condition: Used. end cut as photo #3.
- B-Line Steel Zinc Four Hole Flat Tee Plate Connector 9/16" Hole Mounting B133-ZN - B-Line #B133-ZN four hole flat tee plate connector. Made of steel that provides long lasting durability and strength. It is designed to use with channels. Bracket has four 9/16" holes mounting for convenient installation.
- GRAINGER APPROVED V351EG Tee Plates,Steel - GRAINGER APPROVED V351EG. Grainger reserves the right to accept or reject any order. Grainger Part #:5YE37. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- ST X-NUCLEO-IKS01A1 MEMS Inertial and Environmental Nucleo Expansion Board - Compatible with STM32 Nucleo boards.
- Craftsman Stud Sensor: Scans up to 3/4" Wood + Metal Studs! Model #CMHT77633 - Craftsman Stud Sensor: Scans up to 3/4" Wood + Metal Studs! Model #CMHT77633.
- Gardner Bender SE-92 Strip-Easy Automatic Wire Stripper 8-22 AWG - Gardner Bender SE-92 Strip-Easy Automatic Wire Stripper 8-22 AWG.
- GRAINGER APPROVED FS-500SL GR 120.00 Strut Channel,Steel,Overall L 10ft - GRAINGER APPROVED FS-500SL GR 120.00. Grainger reserves the right to accept or reject any order. Grainger Part #:3ULW7. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GENSPEED W7131763 Data Cable,Cat 6,23 AWG,1000ft,Gray - GENSPEED W7131763. Data Cable,Cat 6,23 AWG,1000ft,Gray. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
- GRAINGER APPROVED FS-200SL PG 120.00 Strut Channel,Steel,Overall L 10ft - GRAINGER APPROVED FS-200SL PG 120.00. Grainger reserves the right to accept or reject any order. Grainger Part #:3ULW4. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V110 4EG Conduit Strap Clamp,Steel,PK10 - GRAINGER APPROVED V110 4EG. Conduit Strap Clamp,Steel,PK10. Grainger reserves the right to accept or reject any order. Grainger Part #:5YB96. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED FS-200 PG 120.00 Strut Channel,Steel,Overall L 10ft - GRAINGER APPROVED FS-200 PG 120.00. Grainger reserves the right to accept or reject any order. Grainger Part #:5YB82. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Lineman'S 4-In-1 Insulated Ratcheting Box Wrench - The Milwaukee Lineman's 4-in-1 Ratcheting Insulated Box Wrench is 1000V UL Classified. High contrast size markings let users identify size easier. The box wrench features twelve point sockets that fit 1/2 in., 9/16 in., 5/8 in.
- SWT-508Eautomatic peeling and cutting line computer stripping machine 0.1 to 8mm - SWT-508E Automatic strip wire machine skinning cutting wire computer strip Wire stripping machine0.1 to 8mm with one set blade. Our product is to use LCD screen man-machine dialogue mode, with nice appearance, simple operation, convenient maintenance, stable performance, speed, precision higher main features.
- PARGRIP 1207-0004 Gripper,PFA, PTFE, ETFE,Comp,3/4In - For use with Pargrip PFA compression fitttings. PARGRIP 1207-0004. Gripper,PFA, PTFE, ETFE,Comp,3/4In. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- Huskie ECO-EZ Transmission Part of EZ-09 Power Unit - Transmission from Huskie ECO-EZ crimping tool. You can just pull your motor out of your old bad transmission and install it into this one.
- Vtg Insulated Tools Co Cohardite Screwdriver Three Nut Drivers 1/2" and 3/8" - Insulated Tools Co Cohardite Screwdriver Three Nut Drivers 1/2" and 3/8". Screwdriver slotted tip 16 SWTwo 1/2" nut drivers 27 SWOne 3/8" nut driver 24 SW
- Torque Sockets,21mm - 80 Ft/Lb, Orange 1500B LTI Tools 1500B 0 - Torque Sockets,21mm - 80 Ft/Lb, Orange Wheel Torque Master Sockets will torque wheel nuts to the correct torque the first time, every time, on most makes and models of Foreign and Domestic cars, light trucks, SUV's and vans. Torque Master Sockets are easy to use and are color coded for quick identification. Using a torque socket avoids over-torquing wheel nuts and prevents major wheel and brake damage. These tools are designed for use with a ½ drive wrench. 1500B.
- MX 1-Sensor 1SENSOR AUTEL 1SENSOR 0 - MX 1-Sensor PRESS RELEASE: Exclusive press release valve provides the interchangeable rubber & metal valve stems easy removal and replacement by hand without a tool. 98% COVERAGE: Programmable 1-Sensor updates during installation for current coverage and service nearly every TPMS-equipped vehicle. MAX SIGNAL STRENGTH: Maximum sensor signal strength to program up to 16 sensors wirelessly including sensors already mounted on the wheel. QUALITY CONTROL: Tested & certified to meet SAE standards. Series numbers provide quality control ensuring only high quality parts are used and guaranteed defect-free. LOWER WEIGHT: 12g Lower MX-Sensor weight is significantly lighter than most sensors ensures greater security and stability for durable use. BATTERY RELIABILITY: Superior sensor battery power.
- 1Set Manual Wire Cable crimping machine and peeling Machine Stripper Stripping - Mounts easily to any bench or work station. High quality light weight construction made of durable aluminum. Easily connects to drill for automatic wire stripping or use Handle for manual stripping.
- GRAINGER APPROVED V200 1/2 Spring Nut,Steel,Overall W 1 3/8in,PK25 - Spring Nut,Steel,Overall W 1 3/8in,PK25. GRAINGER APPROVED V200 1/2. Grainger reserves the right to accept or reject any order. Grainger Part #:4A985. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V120NEO 3/8Y Pipe Cushion Clamp,Steel,Over L 4 1/2ft - GRAINGER APPROVED V120NEO 3/8Y. Grainger reserves the right to accept or reject any order. Grainger Part #:2HCG6. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- HALDER SUPERCRAFT 3566.025 Hammer Handle,Mallet,Hickory,9-13/16 in - HALDER SUPERCRAFT 3566.025. Power adapters and other modifications may be necessary for proper operation in other countries. Grainger reserves the right to accept or reject any order. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- GENSPEED W7133764 Data Cable,Cat 6,23 AWG,1000ft,Blue - GENSPEED W7133764. Data Cable,Cat 6,23 AWG,1000ft,Blue. Sequential foot markings. Solid conductor. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
- GRAINGER APPROVED V683EG Connector,Steel,Overall L 7 1/4in - GRAINGER APPROVED V683EG. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAL1. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Allen Bradley 440E-A17105 Ser. A Lifeline Rope Tensioner System (Uk) - LIFELINE ROPE TENSIONER SYSTEM. LIFELINE TENSIONER. 1 TENSIONER. 1 ALLEN WRENCH. ALLEN KEY ONLY. CABLE PULL. HARDWARE KIT. IFS: BOX 6E.
- Klein Tools 85091 Power Conduit Reamer for 1/2" 3/4" & 1" Conduit NEW - Klein Tools 85091 Power Conduit Reamer for 1/2" 3/4" & 1" Conduit NEW.
- 2pcs Blade SWT508 Computer Wire Stripping Peeling Tungsten Carbide Blade - Toy & Hobbies. Jewelry & Watches. Helpful Links.
- 20050 Ergonomic Super 4 Plus Automatic Wire Stripper for Wires from 0.2mm-6mm... - 20050 Ergonomic Super 4 Plus Automatic Wire Stripper for Wires from 0.2mm-6mm, 16.5cm L x 14cm W x 2.7cm H. Adjustable length stopper and a plier handle design with lockable grip. This tool is a quality Product made in Germany by.
- Handheld Enameled Wire Stripping Peeling Machine Wire Stripper For 0.3mm~2.5mm - Pro DF-8 handheld Magnet wire Stripping Machine / stripper Cutter 110V. Output Speed. Your satis faction is our ultimate goal. 0.3 ~ 2.5mm.
- Cable Stripper Blade Replacement Blade Cutter for Copper Wire Stripping Machine - Product description: ★The stripping blade is made of high-quality alloy, with an outer diameter of 49.5 mm, an inner diameter of 28 mm, and a thickness of 15 mm. Compared with ordinary steel blades, it has higher hardness and longer service life. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness. It is processed with advanced precision grinder processing equipment to ensure its accuracy. ★The blade of the cable stripper becomes hard, so it can keep sharp for a long time. It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. ★Enhanced trimming and high temperature quenching can effectively reduce the loss of the blade and extend the service life. The peeling is fast, smooth.
- AMP 58259-1 MTE Terminating Crimp Head Assembly
- Robertshaw Controls Lux Time Division 2350 Series Motor 45-1465 M78T - The photos are of the actual item you will receive.
- PARGRIP 1207-0023 Gripper,PFA, PTFE, ETFE,Comp,1/8In - For use with Pargrip PFA compression fitttings. PARGRIP 1207-0023. Gripper,PFA, PTFE, ETFE,Comp,1/8In. Governing Law; Limitations. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion.
- WESTWARD GGS_51246 Drawer Slides - WESTWARD GGS_51246. Drawer Slides, Compatible with Grainger Part Number 32H864, 32H865, 32H866, 32H885, 32H886, 32H887, 32H888, 32H889, 32H890, 32H894, 32H895, 32H896, 32H897, 32H898, 32H899, Drawer Slide Function Ball Bearing, Drawer Slide Type Ball Bearing, Includes Mounting Hardware No, Load Capacity per Pair 100 lb, Open Length 31 1/2 in, 1 Pair.
- Cementex insulated tool set wrench sockets ratchet used screw/nut driver in case
- KNIPEX Tools 12 85 110 SBA Stripping Tool for Fiber Optics Cable, 4-1/4" - Stripping tool to remove primary coating of fiber optic cables with Ø 0.125 mm.
- Southwire 4.5mm W. x 75 Ft. L. Polymer Fish Tape 63029840 Southwire 63029840 - Polymer fish tape with a non-conductive tip. Features a spiral extruded polymer design that reduces the amount of effort required to push or pull the fish tape through EMT (electrical metal tube) or PVC (polyvinyl chloride) conduit. It also features a non-conductive leader. Versatile design works great in either filled or empty conduit. for use in up to 2 In. conduit. Includes a 360-degree swiveling flexible metal leader (380-pound strength) or a non-conductive glow in the dark leader (220-pound strength). Low friction design allows the tape to easily glide through the conduit without binding at turns, joints, or couplings. Non-conductive, glow-in-the-dark leader allows for easy install over existing wires. Does not break when folded.
- OK INDUSTRIES Wire Wrapping Kit, G200/R3278, HW-UW224 & Leather Case - FOR SALE USED OK INDUSTRIES Wire Wrapping Kit, G200/R3278, HW-UW224 & Leather Case.
- Sperry Instruments Gst-70M Wire Stripper,20 To 8 Awg - Ideal 45-415 Reflex T-5 Stripper. Zoro Select U07230.019.0150 #10-32 Socket Head Cap Screw, Black Oxide Steel. Zoro Select U01000.037.0300 Grade 5, 3/8"-16 Hex Head Cap Screw, Black Oxide. Beck 0331006007 1/4" Mnpt X 3-1/2" Tbe Galvanized Steel Pipe Nipple Sch 40.
- STARRETT. Bi-Metal Fast Cut Hole Saw 160mm. - Starret hole saw.
- Daniels G125 GO NO-GO Gauge M22520/3-1 .0390-.044 Aviation Repair Handpiece - Pictures are a representation of what you will receive with identical or similar condition. Light scratches and scuffs from typical use, but very clean overall. We allow local pick up. The item is sold AS-IS Where is.
- BURNDY YA6C2TC14E1 TwoHoleLugCmprsnConn,Long,Blue,374/7 - TwoHoleLugCmprsnConn,Long,Blue,374/7. BURNDY YA6C2TC14E1. Each features high-conductivity copper construction and electro-tin plating to resist overheating and corrosion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- Deutsch Metal Removal Tool Set, 16-14, 18-16, 24-20 Ga. (1 per pack) - Tool has a stainless steel shaft and aluminum handle. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. Product Details.
- LOBTEX Wire Stripper LS55 - [Applicable electric wire: 0.1 to 5.5 mm [[square of]] stranded wire. Applicable electric wire: 0.1 to 5.5 mm [[square of]] ]] Stranded wire Total length (mm): 170 Grip color: Black. Nothing is more important than your concerns and frustrations; we will do our endeavor to solve your issues.
- Handheld thinning machine peeling machine DIY leather dispenser leather tool - The position of the leather should be in the middle of the roller, and the digital tablet can press the leather on the surface of the roller. From the front, the relative positions of the blade and the roller should be parallel.
- GRAINGER APPROVED V800NEOCPW End Caps,Neoprene,Overall L 1 5/8in,PK25 - GRAINGER APPROVED V800NEOCPW. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAK9. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V971LY Wing Connector, One-Way,Steel - GRAINGER APPROVED V971LY. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAF1. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- AMP 1-231666-1 Modular Plug Hand Tool Kit w/ Wire Stripper and Hardware - If you are not able to pick up locally, we are able to get competitive freight quotes as well.
- CablePrep Gator Cable Center Conductor Cleaner Replacement Teeth - The Gator teeth remove all traces of the bonded dielectric without scoring the center conductor.
- Channellock 908 Wiring Tool - Made in the USA.Laser etched marking for lasting indication of wire gauges.
- (1800-Pk) Wire Ferrules with Crimpers Pliers Kit - Pliers Not Included - The product image is the actual item you will receive including all contents unless otherwise noted. We are not an authorized dealer of this product. This product has no manufacturers warranty. We will take care of you!
- Cementex 11 Piece High Voltage Insulated Tool Set 1575TW38F Torque Wrench - The set includes the 1575TW38F model torque wrench that is still in the plastic sleeve and the entire set looks to have never been used and is in excellent and clean condition. The set includes the IGW-18 '9/16', IGW-16 '1/2', IGW-14 '7/16' & the IGW-10M '10mm' wrenches, the IS38-18 '9/16', IS38-18 '1/2', IS38-14 '7/16' and the IS38-10M '10mm' sockets, and the IB38-6 & IB38-3 extensions.
- Cooper Bussmann BP-FP-3 Cartridge Carded Fuse Puller by Cooper Bussmann - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Cooper Bussmann BP-FP-3 Cartridge Carded Fuse Puller - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- [1piece] EXSO Manual Wire Cable Wrap Unwrap Tool Hand Driver 22AWG 0.65mm - [Hand Wire Wrapping and Unwrapping in Double ended One Tool. ※ Sortation and content. We provide a range of Korean products at top quality and reasonable prices. hello kr ].
- Gardner Bender 110-120 VAC Outlet Tester - New - Gardner Bender 110-120 VAC Outlet Tester. Condition is new. Fast shipping.
- Manual Wire Stripping Cable Machine Scrap Stripper Scrap Metal Recycle ToolBlack - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Manual Cable Stripper Metal Recycle Tool Wire Cable Stripping Peeling Machine - Characteristic: Stripping fixture. 1 X Stripping machine. Clamp material: Bearing steel. Style: Stripped of used wire and cable. Handle materia: Iron. The cutter head is a fragile accessory. The cutter head can be sharped with a sharpening stone.
- Wire Stripping Machine Manual Wire Cable Stripping Peeling Machine 1-20mm USA - Characteristic: Stripping Fixture. 1 X Stripping Machine. Clamp Material: Bearing Steel. Style: Stripped of Used Wire and Cable. The Cutter Head Is a Fragile Accessory. The Cutter Head Can Be Sharped with a Sharpening Stone.
- Facom r.400 AVSE 10 pcs 1/4 inch insulated socket set, 6 point, 1000V - Including: - 5 sockets 6, 7, 8, 10, 12 mm. - 3 6-point bit sockets 4, 5, 6 mm. - 1 ratchet R.151AVSE. - 1 extension R.210AVSE. This is a new but open box item.
- WINTERS PFQ1552 Pressure Gauge,4" Dial Size,Silver PK 4 - WINTERS PFQ1552. Pressure Gauge,4" Dial Size,Silver PK 4. Grainger reserves the right to accept or reject any order. Power adapters and other modifications may be necessary for proper operation in other countries.
- PIC GAUGES PRO-311D-402C Pressure Gauge,Heavy Duty,4 In.,30 psi - Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
- GENSPEED W5133448E Data Cable,Cat 5e,24 AWG,1000ft,Yellow - GENSPEED W5133448E. Data Cable,Cat 5e,24 AWG,1000ft,Yellow. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
- MONOPRICE 9814 Patch Cord,Cat 6,Flexboot,White,20 ft. - Patch Cord,Cat 6,Flexboot,White,20 ft. MONOPRICE 9814. Voice and Data Patch Cord. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Amazon TOOLS 6" 1000V INSULATED DIAGONAL CUTTERS - Amazon TOOLS 6" 1000V INSULATED DIAGONAL CUTTERS.
- BURNDY YAZ382NNTFX TwoHoleLugCmprsnConn,Long,Pink,L99 - TwoHoleLugCmprsnConn,Long,Pink,L99. BURNDY YAZ382NNTFX. Governing Law; Limitations. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- GENSPEED W2131611E Data Cable,Cat 5e,24 AWG,1000ft,Blue - GENSPEED W2131611E. Data Cable,Cat 5e,24 AWG,1000ft,Blue. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
- BURNDY K2A36U2N MechConn,Aluminum,1/2 in,Slotted - BURNDY K2A36U2N. It features aluminum alloy construction. Power adapters and other modifications may be necessary for proper operation in other countries. Grainger reserves the right to accept or reject any order.
- PIC GAUGES 4501-SC-4LE Gauge,Process,0 to 100 psi - Gauges can be dry or filled, see below. PIC GAUGES 4501-SC-4LE. Diversion contrary to U.S. law is prohibited. Power adapters and other modifications may be necessary for proper operation in other countries.
- Signode Corp Steel Strapping Hand Cutter 2" Cut Width - Country of Manufacture: United States. Will there be a dock or forklift. Size: Length: 26 in. Width: 4 in. Height: 3 in. To get a freight quote we will need to know the following Need it urgently?.
- Circuit Testing Tool, 6/12 Volt, Pick Style (1 per pack) - Test 6 and 12 volt systems, including under the hood and in the dashboard with this ice pick style circuit tester. If the circuit is live the bulb will illuminate inside handle. Tool features a ground wire that is highly flexible even in cold temperatures, special overbite insulated alligator clip designed to stay put and a sharp nickel plated probe.
- BURNDY YAD33M12E12 Ring Terminal,Bare,400 kcmil,450 kcmil - BURNDY YAD33M12E12. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Order Acceptance. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- Gardner Bender Black Metal SAE Locknut Wrench Set Of 1 (1/2") & 1 (3/4") 2.2" L - The Locknut Wrench has been designed to end frustration. It can be used to loosen or tighten a locknut by rotating the wrench in the direction of the arrows marked on both ends. LOCKNUT WRENCH. Locknut Wrench Set.
- Craftsman Stud Sensor: Scans up to 3/4" Wood + Metal Studs! Model #CMHT77633
- 2 Pcs Ferrule Removal Tool Olive Puller Compression Sleeve Puller Olive Remover - 2 x Olive pullers. All of our products are of high quality and selected from the best suppliers and wharehouse. Main color: gold. Material: solid brass.
- HIOKI Communication Base 3912
- HIOKI Communication Base 3912
- HIOKI Infrared Thermometer FT3700 Radiation Temperature HiTESTER
- HIOKI Clamp on Sensor 9291
- OK INDUSTRIES UW2832C Manual Unwrapping Tool,28-32 AWG - OK INDUSTRIES UW2832C. Manual Unwrapping Tool,28-32 AWG. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
- GRAINGER APPROVED 29YK93 OneHoleLugCmprsnConn,Short,Ruby,60 - OneHoleLugCmprsnConn,Short,Ruby,60. GRAINGER APPROVED 29YK93. Grainger Part #:29YK93. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Handheld Magnet Wire Stripping Machine / Stripper Cutter 110V fast shipping 🔥 - Pro DF-8 handheld Magnet wire Stripping Machine / stripper Cutter 110V. Output Speed. Your satis faction is our ultimate goal. 0.3 ~ 2.5mm.
- Lock Set for Cabinet Series Includes (1) Lock, (8) Keys TTLK003G - 1 Each - Item model number TTLK003G. Part Number TTLK003G. Lock Type Key Lock. We will work together to find a suitable solution. We belive that mutual trust and collaborative work can solve any problem. Especially for flammable liquids.
- Automatic Scrap Cable Stripper Electric Wire Stripping Machine Copper Recycling - Manual Wire Cable Stripping Peeling Machine Scrap Stripper for 1-20mm Wire USA. Can be operated by one person or two person to improve stripping efficiency and output. Stripping range: 1-20mm / 0.04-0.79in.
- Automatic Scrap Cable Stripper Electric Wire Stripping Machine Copper Recycling - Manual Wire Cable Stripping Peeling Machine Scrap Stripper for 1-20mm Wire USA. Can be operated by one person or two person to improve stripping efficiency and output. Stripping range: 1-20mm / 0.04-0.79in.
- Hughes Pull-Thru Assembly Procedures Insertion Tool - Good shape! The foam in the box has started to disintegrate. HUGHES PULL-THRU ASSEMBLY PROCEDURES INSERTION TOOL.
- Gardner Bender GB GS-86 6" Vintage Diagonal Cutting Pliers - Gardner Bender GB GS-86 6" Vintage Diagonal Cutting Pliers. Diagnal cutters are in great used condition.
- Cooper Tools Wire-Wrap Gun 27300Ac6 (Iet68) - No accessories or power cords. This powers up. See pictures for more details. This powers up, but it is labeled not working correctly. SOLD AS IS FOR PARTS OR REPAIR! We are quick to respond and resolve.
- Standard Pneumatic Wire Wrapping Sleeves & Bits 60341 + More - Lot Of 25 (Iet42) - No accessories or power cords. See pictures for more details. This powers up, but it is labeled not working correctly. SOLD AS IS FOR PARTS OR REPAIR! We do not have power cords to provide unless they are attached to the item or unless stated that they are provided.
- The Cooper Group Wire-Wrap Sleeves & Bits 509278 + More -- Lot Of 25 (Iet41) - No accessories or power cords. See pictures for more details. This powers up, but it is labeled not working correctly. SOLD AS IS FOR PARTS OR REPAIR! We do not have power cords to provide unless they are attached to the item or unless stated that they are provided.
- Sinclair SM800 Junior Groover Flooring Saw with Case & Manual (Used)- Germany - Made in Germany. Manual indicates this saw is used for PVC and Linoleum Flooring. I have run the saw and it powers up and runs well. The power cord has been replaced. There is a blade and tools included.
- Greenlee 650 Hook Type Cable Sheave 4,000 lbs Excellent Condition!
- 3/16" Dia. Red Adhesive-Lined Shrink Tubing - ((4) 6" pcs - 2 ft. total) - 3/16" ID (before shrink) red adhesive-lined shrink tubing. Made of polyolefin. Has 3 to 1 shrink ratio. Polyolefin is the standard-bearer in the shrink tubing market. It heats evenly, doesn't bubble or split, and is self-extinguishing.
- GB General Purpose Duct Seal 1 lb. Bar Grey - . GB Grease Lube Type. General Purpose Product Type. Conduit Seal Container Size. 1 lb. Packaging Type. Bar Non-hardening *Non-combustible * Seals electrical conduit openings against drafts, dust, moisture and noise * Dark gray * Bar.
- Deutsch Pick Removal Tool #Dt-Rt1 (1 Per Pack) - Best Deal. Overall Excellent Condition.
- Metra Car Stereo Wire Harness CF-WHFD5 Ford Lincoln Mercury Radio Installation
- Bar Air Pressure Gauge 13mm 1/4 BSP Thread Double Scale For Air Compressor_:WR - 1 x Compressor Gauge. Material: Iron Shell. - Easy to read dial. Colour: Black.
- Engineer Interchangeable Die plate set PAD-11S for PAD-11,12,13 japan - Each die width: 0.7, 1.0 mm, 1.3 mm, 1.6 mm, 1.9 mm, 2.2 mm. Each die thickness: 1.0 mm and 1.5 mm, 2.0 mm. In a surprise finish, as if that special tool. More than 90 matches. PAD-11, 12, and 13 bodies can be mounted.
- VESSEL 3500E-2 Wire Stripper universal mini micro crimping tool F/S w/Tracking# - Cutting of various types of electronic wire represented KV to strip. Product weight: 99.8 g.
- Bar Air Pressure Gauge 13mm 1/4 BSP Thread Double Scale For Air Compressor_^;d
- Bar Air Pressure Gauge 13mm 1/4 BSP Thread Double Scale For Air Compressor_U:kx - 1 x Compressor Gauge. Material: Iron Shell. - Easy to read dial. Colour: Black.
- Bar Air Manometer 13mm 1/4 BSP Gewinde Double Scale für Luftkompressor ❤A:yx - Material: Iron Shell. - Easy to read dial. 1 x Compressor Gauge.
- ONE NEW YQK-300 Hydraulic Crimping Tools For Cable Connectors 10-300MM2 Crimper - Hydraulic crimping tool is a professional tool for crimping copper and aluminum lugs with different types, a wide range of crimping dies from 4mm2 to 1000mm2 to suit for different size demand. The main crimping shape is hexagonal, special shape design is provided.
- YQK-300 Hydraulic Crimping Tools For Cable Connectors 10-300MM2 Crimper - Hydraulic crimping tool is a professional tool for crimping copper and aluminum lugs with different types, a wide range of crimping dies from 4mm2 to 1000mm2 to suit for different size demand. The main crimping shape is hexagonal, special shape design is provided.
- ONE NEW YQK-300 Hydraulic Crimping Tools For Cable Connectors 10-300MM2 Crimper - Hydraulic crimping tool is a professional tool for crimping copper and aluminum lugs with different types, a wide range of crimping dies from 4mm2 to 1000mm2 to suit for different size demand. The main crimping shape is hexagonal, special shape design is provided.
- NEW YQK-300 Hydraulic Crimping Tools For Cable Connectors 10-300MM2 Crimper - Hydraulic crimping tool is a professional tool for crimping copper and aluminum lugs with different types, a wide range of crimping dies from 4mm2 to 1000mm2 to suit for different size demand. The main crimping shape is hexagonal, special shape design is provided.
- 1PCS New Manual Copper Wire Stripping Machine Cables Wire Stripper - The peeling function can be easily completed. Before operation, the machine should be fixed to avoid shaking to affect the effect of using. It can also operate the stripping. Hand version: 0.5-30 square rubber line.
- 1.5-25mm Wire Machine Stripping Copper Stripper Cable Scrap Manual Recycle Tool - Mounts easily to any bench or work station. High quality light weight construction made of durable aluminum. Easily connects to drill for automatic wire stripping or use Handle for manual stripping.
- ONE New Manual Copper Wire Stripping Machine Cables Wire Stripper - The peeling function can be easily completed. Before operation, the machine should be fixed to avoid shaking to affect the effect of using. It can also operate the stripping. Hand version: 0.5-30 square rubber line.
- Durable Copper Wire Stripping Machine Hand Crank Drill Operated Cable Stripper - Mounts easily to any bench or work station. High quality light weight construction made of durable aluminum. Easily connects to drill for automatic wire stripping or use Handle for manual stripping.
- 1pcs Manual Wire Cable Stripping Machine Peeling Machine Cable Wire Stripper - (1 Manual Wire Stripper. Scrive Knife:White steel knife. Gross Weight: 1.5kg. excluded.). Scope of application: 1～25mm.
- Great Manual Wire Cable Stripping Machine Peeling Machine Cable Wire Stripper - 1 Manual Wire Stripper. However, we will try our best to minimize it. Scope of application: 1～25mm.
- Stanley 55-099 FatMax Extreme Fubar - Stanley 55-099 FatMax Extreme Fubar 55-099Please read descriptions carefully before ordering.Please do not hesitate to contact the seller if you need additional details of this product.
- Automatic Scrap Cable Stripper Electric Wire Stripping Machine Copper Recycling - Can Be Operated by One Person or Two Person to Improve Stripping Efficiency and Output. Stripping Range: 1-20mm / 0.04-0.79in. 1 Wire Stripping Machine. Small and Compact, Easy to Use and Carry. Machine Total Height: 120mm / 4.7in.
- MAKITA Chisel groove cutting cutter Blade Unused width 4.5 mm
- (Hozan) wire stripper fine line for optical fiber for single AWG34 ~ 26 more F/S - Wire stripper for Pro professional pursuing usability, have evolved further. For optical fiber. Tip pliers is the bending of wires and can be used to pull. Fine line for optical fiber available. Pliers, wire bending or pulling handy tip with cutter with excellent sharpness in the basal part.
- Heated Auto Electric Windshield Ice & Snow Scraper 12V - Heated Car Window Windshield Ice & Snow Shovel Scraper. What's in the Box: Scraper with Manual. DC 12V Output Socket. Coming soon. Health & Beauty. Sporting Goods. Condition: New. Grip Handle.
- Frameless Lens Punching And Notching Machine All-In-One Machine Drilling Machine
- Fluke Banjo, Used, No adapter - Fluke Banjo, Used, No adapter.
- ENGINEER Universal Micro Conector Crimpers Precision PA-20 F/S w/Tracking# Japan - Each reference for wires: #28~22, #24~#20, #22~#18, #20~#18. Corresponds to the #28~#16 AWG wire. Product weight: 136 g. Batteries included: no. Each die thickness: 2.5 tmm, tmm 2.5, 2.5 tmm, tmm 2.5.
- Fujiya wire stripper A type (AWG / mm display) PP323A-165 F/S w/Tracking# Japan - Length: 164 mm. Weight: 140 g. Product weight: 141 g.
- Ohms Law 24" X 36" Poster Electrician Classroom - OHMS LAW POSTER PRINTED WITH UV SOLVENT INK ON PROFESSIONAL 8 MIL HEAVY POSTER PAPER.
- Antec Digicon Compression Tool Coaxial Cable Connectors - Antec Digicon Compression Tool Coaxial Cable Connectors. Good working condition, has numbers etched on the side, see photo 2.
- 3/8" Dia. Clear Adhesive-Lined Shrink Tubing - ((4) 6" pcs - 2 ft. total) - 3/8" ID (before shrink) clear adhesive-lined shrink tubing. Made of polyolefin. Has 3 to 1 shrink ratio. Polyolefin is the standard-bearer in the shrink tubing market. It heats evenly, doesn't bubble or split, and is self-extinguishing.
- LA-4102 - Repl Blade Set For 30-696 - (Pack of 1) - IDEAL #LA-4102 - Repl Blade Set For 30-696. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- REPLACEMENT FISH TAPE (LOT OF 4) 3 - 1/8" x 50' & 1 - 1/8"x100' - TOPAZ & GLOBAL - GRT8100 / TOPAZ 890.
- KLEIN TOOLS 85091 Power Conduit Reamer for 1/2" 3/4" & 1" Conduit - NEW - Includes replaceable No. 2 square recess bit for installing conduit fittings. Conduit Size: 1/2", 3/4", 1" (1.3 cm, 1.9 cm, 2.5 cm). Designed to fit into power drill chucks and quick release adapters with improved bit retention.
- Buckingham 574L Linemen Staple Stick - Item model number 574L. Holds 10 staples. Slots are 1/8″ W x 1″ L. Weight: 0.32 lb. Color Light Green. Number of Fasteners 10. We will work with you to resolve any problem you may have.
- (1) Greenlee 909 6 Spindle Wire Cart Dispenser Caddy Dolly 13 Avail ED4U #3080 - (13 available, all are in similiar & useable condition. Scroll through pics for actual item(s) you may receive. I will work with you to find a solution. :) electricdealsforyou #3080 SHELF: SEMI-1. There may also be a Fastenal to Fastenal option.
- Gardner Bender GS-387 7 1/2" Linemen's Pliers - Gardner Bender GS-387 7 1/2" Linemen's Pliers.
- (2) Current tools 670 Screw type reel stand s - (2) Current tools 670 Screw type real stands In good pre own condition comes as shown local pick up only
- Cementex Insulated Tool Kit - Cementex Insulated Tool Kit. Socket, ratchets, nut drivers, scwrew drivers and 2 sets of wrenches.
- PROFESSIONAL EQUIPMENT 4106732 Water Pressure Gauge,Freeze Proof - Water Pressure Gauge,Freeze Proof. This gauge features plastic case construction to resist corrosion and impact in demanding applications. Diversion contrary to U.S. law is prohibited. Power adapters and other modifications may be necessary for proper operation in other countries.
- VESSEL wire stripper for single wireA 3000A Free Ship w/Tracking# New from Japan - Wire stripper that can rip off the coating perfectly quickly in one operation. -IV, to the strip of various wires and cords, including VSF.
- Lobster Wire Stripper 0.2-5.5Mm2 Ls55 Free Shipping with Tracking# New Japan - Applicable wire: 0.1 to 5.5 mm [[squared]] from wire. It is with a sharp cutter.
- GB SE-98 Coaxial Cutter and Stripper Coaxial Cable Wire Black Handle NOS - GB SE-98 Coaxial Cutter and Stripper Coaxial Cable Wire Black Handle NOS.
- Knipex 98-99-11-S3 10 piece SAE insulated 3/8 inch socket set - Knipex 98-99-11-S3 10 piece SAE insulated 3/8 inch socket set.
- Jonard Tools Connector Removal Tool Kit, KR-260, Extraction Tools, 3 PC Set - Pin Extraction Removal Tool Kit. Color Code: Yellow, Blue, Red. Includes Leather Case.
- HOZAN / WOOD GRIP ELECTRICIAN'S KNIFE / Z-682 / Free Ship w/Tracking# New Japan - Made in Japan using natural wood using carbon steel for knife sharpener works and feels better non-slip handle electric knife. Country of origin: Japan. Contoured wooden handle. Product weight: 81.6 g.
- Parker 18 x 15 x 10 Hard Case With Jensen Tools Kits Jtk -17xr Rrt - Parker 18 x 15 x 10 Hard Case With Jensen Tools Kits Jtk -17xr Rrt.
- ALLOSUN Automotive Cable Wire Tracker Car Tracer Finder Test Short & Open DC - Click here to see description.
- GRAINGER APPROVED FS-200SS PG 60.00 Strut Channel,Steel,Overall L 5ft - GRAINGER APPROVED FS-200SS PG 60.00. Grainger reserves the right to accept or reject any order. Grainger Part #:5YB88. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- BURNDY KPA4CTP MechConn,Copper,1/4 in,Slotted - BURNDY KPA4CTP. It features copper alloy body construction. Power adapters and other modifications may be necessary for proper operation in other countries. Grainger reserves the right to accept or reject any order.
- Gardner Bender GFI-3501 Ground Fault outlet Receptacle Tester & Circuit Analyzer - Style Ground Fault Receptacle Tester & Circuit Analyzer (GFIC). Succession of yellow and red lights provide indication of circuit status or specifies wiring errors. Tests for ground fault interruption, open ground, open neutral, open hot, hot/ground reverse, hot/neutral reverse and correct wiring.
- Lobtex Shrimp Wire Stripper LS55 916 - Applicable wire: 0.1 to 5.5 mm [[squared]] stranded wire Total length (mm): 170 Grip color: Black. Write to us. Nothing is more important than your concerns and frustrations; we will do our endeavor to solve your issues.
- 1PC NEW HS-22 Wire Crimp Tools For Crimping AWG 10-4 Terminals - (HS-22 Crimping tool. excluded.). Capacity:5.5-25mm².
- Electrician Scissors for Cutting, Stripe, File anElectrical Repair Tool 5.25" - Electrician Scissors for Cutting, Stripe, File anElectrical Repair Tool 5.25". New open box with pouch check pictures Check out my store over 1000 items clothing household tools and vintage items
- CablePrep FOC-300 Fiber Optic Scissor Tool - Click here to see description.
- MONOPRICE 2289 Patch Cord,Cat 6,Booted,Green,1.0 ft. - MONOPRICE 2289. Patch Cord,Cat 6,Booted,Green,1.0 ft. Voice and Data Patch Cord. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- BURNDY YA6CL3BOX OneHoleLugCmprsnConn,STD,Blue,374/7 - OneHoleLugCmprsnConn,STD,Blue,374/7. BURNDY YA6CL3BOX. Each features high-conductivity copper construction and electro-tin plating to resist overheating and corrosion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- GE General Electric 50-233391AGAA2 Line to Ground High Voltage Tester Clamp - Warehouse Storage Location: AB-23-03. Condition: Used. Model: 50-233391AGAA2.
- NEW Enduro BRT-018 SS Extraction Tool - AB-90091: tool for use with the Enduro hub bearing press (AB-9055) to press bearings into BB90 bottom bracket. AB-9009: tool for removal or installation of 6806 bearings into any model BB30 bottom bracket.
- Eclipse Tools CP-301G Pro'sKit Precision Wire Stripper, 30-20 AWG - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- FLUKE T5-600 Cat III Digital Electrical Multimeter T5 600V 100A - This Fluke T5-600 works perfectly, though. Does everything it is supposed to do, when it's supposed to. I have trusted my life with Fluke products my entire electrical career. Because of it's slender profile, makes it easy to troubleshoot in tight electrical panels, the leads exiting at the base make just simply tucking it into a hip pocket easy, the auto-ranging capability, and the "fork" instead of the clamp to check amp draw, current loads add to the convenience of the T5-600.
- Milwaukee 48-22-2167 66/110 Punchdown Blade - Milwaukee 48-22-2167 66/110 Punchdown Blade.
- 20 Rolls WarriorWrap 7mil General Vinyl Electrical Tape White 60'x3/4" WW-716-WT
- 10 Rolls WarriorWrap 7mil Select Vinyl Electrical Tape Green 60'x 3/4" WW-722-GN
- B-LINE 1/4" Stud Nut with Spring For B22/B24/B26/B32 Channel 3/4" Bolt SN224 - B-Line #SN224-3/4 stud nut with attached spring. Fits B22, B24, B26, B32 strut channel. 1/4" x 20 tpi 3/4" stud. 1/4" thick nut. Fruit Ridge Tools, LLC. (SKU # BLSN224-3/4-EA; Weight: 0.1000 lbs.).
- B-Line Green Epoxy Steel Channel Square Washer 3/8" and 5/16" Bolt Sizes B200GRN - B-Line #B200GRN green channel square washer. Made of epoxy steel long lasting performance. Features include Fruit Ridge Tools, LLC. Bolt Size: 3/8" and 5/16". Made of steel.
- B-LINE 1/2" Channel Nut 5/8" x 11 tpi For B22/B24/B26/B32 Strut N255 - NO SPRING - B-Line #N255 channel nut. Fits B22/B24/B26/B32 strut channel. Fruit Ridge Tools, LLC. (SKU # BLN255-EA; Weight: 0.1500 lbs.).
- B-LINE Twirl Nut 13 tpi x 1/2" Fits B11, B12, B22, B24, B26, B32 Channel TN225 - B-Line #TN225 twirl nut. Fits B11, B12, B22, B24, B26 and B32 channel. 1/2" thick nut with 1/2" x 13 tpi threaded hole. (SKU # BLTN225-EA; Weight: 0.1000 lbs.).
- B-LINE 3/8" Channel Nut w/Spring 1/2" x 13 tpi For B42/B52/B54/B56 Strut N525 - B-Line #N525 channel nut. Fits B42/B52/B54/B56 strut channel. Nut has attached spring and 3/8" thick with 1/2" x 13 tpi threaded hole for attaching threaded rod. Fruit Ridge Tools, LLC. (SKU # BLN-525-EA; Weight: 0.1000 lbs.).
- B-LINE Steel Zinc-Plated Channel Twirl Nut 18 tpi x 5/16" Hole 1/4" Thick TN223 - B-Line #TN223 twirl nut. Fits all channel sizes except B62 and B72. 1/4" thick nut with 5/16" x 18 tpi threaded hole. (SKU # BLTN223-EA; Weight: 0.1500 lbs.).
- B-LINE 1/2" Channel Nut w/Spring 1/2" x 13 tpi For B22/B24/B26/B32 Strut N225 - B-Line #N225 channel nut. Fits B22/B24/B26/B32 strut channel. Nut has attached spring and 1/2" thick with 1/2" x 13 tpi threaded hole for attaching threaded rod. Fruit Ridge Tools, LLC. (SKU # BLN225-EA; Weight: 0.1000 lbs.).
- B-Line Strut Mounting Clamp Strap For 2" EMT/IMC/Pipe/Rigid Conduit B2213 - Capacity: 2" thinwall EMT, IMC, rigid conduit, pipe (fits 2.192"-2.4" O.D. pipe). Design load: 600 Lbs. Lateral/75 Lbs. Machine screw and square nut included. (SKU # BLB2213-EA; Weight: 0.3000 lbs.).
- New B-Line 3/4" Zinc-Plated Thinwall EMT Conduit to Strut Strap Pipe Clamp B2002 - B-Line #B2002 strut strap 3/4" pipe clamp. Made of zinc-electroplated steel for long lasting performance. Features include Includes combination recess hex head machine screw and square nut. Trade size 3/4".
- B-LINE 1/4" Channel Nut w/Spring 1/4" x 20 tpi For B42/B52/B54/B56 Strut N524 - B-Line #N524 channel nut. Fits B42/B52/B54/B56 strut channel. Nut has attached spring and 1/4" thick with 1/4" x 20 tpi threaded hole for attaching threaded rod. Fruit Ridge Tools, LLC. (SKU # BLN524-EA; Weight: 0.1000 lbs.).
- New B-Line Zinc-Electroplated Steel EMT 1-1/4" Strut Strap Pipe Clamp Fittings - EMT strut strap. B-Line #B2004-ZN strut strap pipe clamp fitting. Made of zinc-electroplated steel for long lasting performance. Features include Made of zinc-plated steel. (SKU # BLB2004-EA; Weight: 0.2000 lbs.).
- B-Line Strut Mounting Clamp Strap For 3-1/2" Pipe/Rigid Conduit NO BOLT B2016 - Capacity: 3-1/2" Rigid conduit or pipe (fits 4" O.D. pipe). B-Line #B2016 3-1/2" rigid pipe strut/strap fitting. Features include Design load: 1000 Lbs. Lateral/150 Lbs. Machine screw and square nut included.
- PIC GAUGES PRO-311D-402L Pressure Gauge,Heavy Duty,4 In.,800 psi - Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
- BURNDY YA31LB OneHoleLugCmprsnConn,STD,Red,1025/18 - OneHoleLugCmprsnConn,STD,Red,1025/18. BURNDY YA31LB. One-Hole Lug Compression Connector, Color Code Red, Die Code 1,025, Material Copper, Standards CSA Certified, UL Listed, UL467, Connector Type Belled Straight Barrel.
- ROPER WHITNEY 16 Hole Punch,9/32" Compatible Die - ROPER WHITNEY 16. Hole Punch,9/32" Compatible Die. Grainger Part #:22JK73. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V110 3-1/2EG Clamp,Steel,Over L 9ft,PK10 - GRAINGER APPROVED V110 3-1/2EG. Clamp,Steel,Over L 9ft,PK10. Grainger reserves the right to accept or reject any order. Grainger Part #:2HCH6. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- RADIATION ALERT WTPRA Wipe Test Plates,Reusable Type,1 qty. - RADIATION ALERT WTPRA. Wipe Test Plates,Reusable Type,1 qty. Wipe Test Plates, Reusable. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED 29YK87 OneHoleLugCmprsnConn,Short,Gold,45 - OneHoleLugCmprsnConn,Short,Gold,45. GRAINGER APPROVED 29YK87. Grainger Part #:29YK87. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- MONOPRICE 9840 Patch Cord,Cat 6,Flexboot,Yellow,30 ft. - Patch Cord,Cat 6,Flexboot,Yellow,30 ft. MONOPRICE 9840. Voice and Data Patch Cord. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V325Y Corner Connector, 90 Degrees,Steel - GRAINGER APPROVED V325Y. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAF2. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Global Machinery Company BJ9AUL Biscuit Joiner Used Complete Tools Case 120 VAC - This Biscuit Joiner has a no load speed of 10,000 RPM, depth cut of 5/16", 13/32", 15/32"& 17/32". It will accommodate Biscuit size #0, #10 & #20.
- GREENLEE 909 Steel Welded Frame 6 Spindle Wire Dispenser Caddy 39”-30”-31” 93Lbs - GREENLEE 909 Steel Welded Frame 6 Spindle Wire Dispenser Caddy 39”-30”-31” 93Lbs.
- Cementex Insulated Tool Kit - Cementex Insulated Tool Kit. All are in excellent slightly used conditionShipping is free using USPS Priority
- 2 Pcs Ferrule Removal Tool Olive Puller Compression Sleeve Puller Olive Remover - 2 x Olive pullers. Material: solid brass.
- AT-A-GLANCE HG-Kit-ALN Level Indicator Repair Kit - Level Indicator Repair Kit. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Power adapters and other modifications may be necessary for proper operation in other countries.
- PIC GAUGES PRO-311D-404CC Compound Gauge,Heavy Duty,4 In.,30/30 - Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
- Channellock 908 Wiring Tool - Made in the USA.Laser etched marking for lasting indication of wire gauges.
- Wire wrap gun - Wire wrap gun - hand held electric - 30 awg wire bit include. Wraps 30-24 awg Light weight - high speed motor - heavy duty electrical cord
- wire wrap gun - electric - Wire wrap gun - OK Industries. OK-20-BF electric - Hand held - High speed motor. Designed for 30-24 gage wire
- GRAINGER APPROVED V120NEO 5/8Y Pipe Cushion Clamp,Steel - GRAINGER APPROVED V120NEO 5/8Y. Grainger reserves the right to accept or reject any order. Grainger Part #:5YE21. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED FS-500 PG 120.00 Strut Channel,Steel,Overall L 10ft - GRAINGER APPROVED FS-500 PG 120.00. Grainger reserves the right to accept or reject any order. Grainger Part #:5YB83. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- MONOPRICE 143 Patch Cord,Cat 5e,Booted,Blue,50 ft. - MONOPRICE 143. Patch Cord,Cat 5e,Booted,Blue,50 ft. Voice and Data Patch Cord. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
- MONOPRICE 146 Patch Cord,Cat 5e,Booted,Blue,100 ft. - MONOPRICE 146. Patch Cord,Cat 5e,Booted,Blue,100 ft. Voice and Data Patch Cord. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
- MONOPRICE 147 Patch Cord,Cat 5e,Booted,Gray,100 ft. - MONOPRICE 147. Patch Cord,Cat 5e,Booted,Gray,100 ft. Voice and Data Patch Cord. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
- MONOPRICE 140 Patch Cord,Cat 5e,Booted,Blue,25 ft. - MONOPRICE 140. Patch Cord,Cat 5e,Booted,Blue,25 ft. Voice and Data Patch Cord. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
- MONOPRICE 137 Patch Cord,Cat 5e,Booted,Blue,14 ft. - MONOPRICE 137. Patch Cord,Cat 5e,Booted,Blue,14 ft. Voice and Data Patch Cord. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
- WESTWARD 07-27B Lock/Key Set - WESTWARD 07-27B. Grainger reserves the right to accept or reject any order. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Power adapters and other modifications may be necessary for proper operation in other countries.
- GRAINGER APPROVED FS-500SL PG 120.00 Strut Channel,Steel,Overall L 10ft - GRAINGER APPROVED FS-500SL PG 120.00. Grainger reserves the right to accept or reject any order. Grainger Part #:3ULW6. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- PANDUIT FSD82-18-C Ferrule,Tin,Copper,10 AWG,PK100 - Ferrule,Tin,Copper,10 AWG,PK100. PANDUIT FSD82-18-C. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- BLACKBURN AMTTC4 InsulMultitapCon,14 AWG,4 AWG - InsulMultitapCon,14 AWG,4 AWG. BLACKBURN AMTTC4. Aluminum Dual Rated Connectors are intended for use with aluminum, copper-clad aluminum, and copper conductors, rated 90 Degrees C or less. The space-saving design includes multiple cable entries with oxidation protection.
- GRAINGER APPROVED V620 3/8WB Channel Beam C-Clamp,Iron - GRAINGER APPROVED V620 3/8WB. Channel beam C-clamp is used under roof installations with bar joist construction. Grainger reserves the right to accept or reject any order. Grainger Part #:2HCK3. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V339EG Splice Flat Plates,Steel - GRAINGER APPROVED V339EG. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAJ7. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V111 2Y Conduit Strap Clamp,Steel,PK10 - GRAINGER APPROVED V111 2Y. Conduit Strap Clamp,Steel,PK10. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAR2. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- POWER FIRST 22EZ35 Long-Barrel Spl,TinPltd,Long,Pink - Long-Barrel Spl,TinPltd,Long,Pink. POWER FIRST 22EZ35. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
- GRAINGER APPROVED V111 1Y Conduit Strap Clamp,Steel,PK10 - GRAINGER APPROVED V111 1Y. Conduit Strap Clamp,Steel,PK10. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAP5. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V111 1/2Y Conduit Strap Clamp,Steel,PK10 - GRAINGER APPROVED V111 1/2Y. Conduit Strap Clamp,Steel,PK10. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAN8. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V321Y Angle Connector - Open & Closed,Steel - GRAINGER APPROVED V321Y. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAE9. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- BURNDY KLU35TP MechConn,Copper,#10,Slotted - BURNDY KLU35TP. It features copper alloy body construction. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- BURNDY YA1CLB OneHoleLugCmprsnConn,STD,Green,1018/11 - OneHoleLugCmprsnConn,STD,Green,1018/11. BURNDY YA1CLB. Each features high-conductivity copper construction and electro-tin plating to resist overheating and corrosion. One-Hole Lug Compression Connector, Color Code Green, Die Code 1,018, Material Copper, Standards CSA Certified, UL Listed, UL467, Connector Type Belled Straight Barrel.
- BURNDY 1PL42 InsulMultitapCon,Unplated,14 AWG,4 AWG - InsulMultitapCon,Unplated,14 AWG,4 AWG. BURNDY 1PL42. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- BURNDY KA6U MechConn,Aluminum,1/4 in,Slotted - BURNDY KA6U. It features aluminum alloy construction. Power adapters and other modifications may be necessary for proper operation in other countries. Grainger reserves the right to accept or reject any order.
- BURNDY SC4 Plastic Cover,600 V AC - BURNDY SC4. Plastic Cover,600 V AC. Split-Bolt Connector is highly resistant to cracking and corrosion. Provides maximum pressure and a secure connection on all combinations of run and tap conductors.
- Intercable 16020-F1 Cable Cutter and Crimper Electrician Scissors 2K + Safetybox - With slot to crimp insulated or non insulated end sleeves from 0,5 to 4 mm2. Loose-free screw/pin hinge. High cutting performance.
- 1pc SWT508-SD Computer Wire Peeling Stripping Cutting Machine New
- Manual Wire Stripping Cable Machine Scrap Stripper Metal Recycle Tool Black - The cutter head is a fragile accessory. It can also be purchased separately. The price is $10 for free shipping. The cutter head can be sharped with a sharpening stone. Remember not to be too hard. Specification: Clamp material: Bearing steel Handle materia: Iron Clamp material: Bearing steel Style: Stripped of used wire and cable Color: Black Characteristic: Stripping fixture Shape: Ball blade Size: Length: 130mm/5'' Height: 140mm/5.5'' Stripping diameter: 1-20mm/0.03-0.78'' Application: Applicable to 1-20mm diameter wire, greatly enhance the scissors with more than 3-5 times the line Feature: ● Sturdy and durable, free to disassemble, free assembly. ● The blade is easy to operate. Package included: 1 X Stripping machine ☞Notice: 1.The color may have different as the d.
- Round Cable Stripper Blade Stripping Cutter Spare Blade for HXSMS-25 HXSMS-26 - Product description: ★The stripping blade is made of high-quality alloy, with an outer diameter of 65 mm, an inner diameter of 26 mm, and a thickness of 15 mm. Compared with ordinary steel blades, it has higher hardness and longer service life. ★Our cable stripping blades are quenched at high temperature to enhance their hardness and toughness. It is processed with advanced precision grinder processing equipment to ensure its accuracy. ★The blade of the cable stripper becomes hard, so it can keep sharp for a long time. It is very suitable for cutting wires of different materials and removing plastic and rubber insulation. ★Enhanced trimming and high temperature quenching can effectively reduce the loss of the blade and extend the service life. The peeling is fast, smooth and without burrs.
- SPM MDRZX110NC/M Headphones,For Use With 4PJV6 - Headphones with Ear Defenders, Enables User to Listen to Internal Machine Noise with a 4PJV6, Frequency Range 8 levels of amplification Hz, For Use With 4PJV6. Headphones,For Use With 4PJV6. SPM MDRZX110NC/M.
- OK INDUSTRIES WSU-30M Wrap/Strip/Unwrap Tool,30 AWG,Blue - Wrap/Strip/Unwrap Tool,30 AWG,Blue. OK INDUSTRIES WSU-30M. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- OK INDUSTRIES HW-224LH Manual Wire Wrap Tool,LH,22-24 AWG - Our 30,000 Sq.
- American Lighting AD56-5CCT-DB Recessed Trims Recessed Lights
- Klein Tools 11082 - WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- OK INDUSTRIES WD-30-B Wire Wrap Wire w/Disp,30 AWG,Blu,50ft - This conductive, oxygen-free copper wire is used to create electronic circuit boards without any soldering. It is suitable for cut, strip, and wrap applications, such as on a production line.Wire wrapping wire is a conductive, oxygen-free copper wire that connects and distributes power to electronic components, typically in a circuit board.
- GRAINGER APPROVED V120NEO 7/8Y Pipe Cushion Clamp,Steel - GRAINGER APPROVED V120NEO 7/8Y. Grainger reserves the right to accept or reject any order. Grainger Part #:5YE22. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V200 5/8 Spring Nut,Steel,Overall W 1 3/8in,PK25 - Spring Nut,Steel,Overall W 1 3/8in,PK25. GRAINGER APPROVED V200 5/8. Grainger reserves the right to accept or reject any order. Grainger Part #:5YE13. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED FS-200SS GR 60.00 Strut Channel,Steel,Overall L 5ft - GRAINGER APPROVED FS-200SS GR 60.00. Grainger reserves the right to accept or reject any order. Grainger Part #:5YB87. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V110 2-1/2EG Conduit Strap Clamp,Steel,PK10 - GRAINGER APPROVED V110 2-1/2EG. Conduit Strap Clamp,Steel,PK10. Grainger reserves the right to accept or reject any order. Grainger Part #:5YB94. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V500 1/4EG Washer,Steel,Overall W 1 5/8in,PK25 - Washer,Steel,Overall W 1 5/8in,PK25. GRAINGER APPROVED V500 1/4EG. Grainger reserves the right to accept or reject any order. Grainger Part #:5YE58. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V211 1/2 Spring Nut,Steel,Overall W 1 1/4in,PK25 - GRAINGER APPROVED V211 1/2. Spring Nut,Steel,Overall W 1 1/4in,PK25. Grainger reserves the right to accept or reject any order. Grainger Part #:5YE43. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V353EG Corner Plates,Steel - GRAINGER APPROVED V353EG. Grainger reserves the right to accept or reject any order. Grainger Part #:5YE39. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- MONOPRICE 134 Patch Cord,Cat 5e,Booted,Blue,7.0 ft. - MONOPRICE 134. Patch Cord,Cat 5e,Booted,Blue,7.0 ft. Voice and Data Patch Cord. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
- HUBBELL PREMISE WIRING HC6AB40 Patch Cord,Cat 6A,Clear Boot,Blue,40 ft. - Patch Cord,Cat 6A,Clear Boot,Blue,40 ft. Voice and Data Patch Cord. Ethernet cable features snagless, RJ45 connectors. Temp range -40 Degrees - 167 Degrees F. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- HUBBELL PREMISE WIRING HC6AB01 Patch Cord,Cat 6A,Clear Boot,Blue,1 ft. - Patch Cord,Cat 6A,Clear Boot,Blue,1 ft. Voice and Data Patch Cord. Ethernet cable features snagless, RJ45 connectors. Temp range -40 Degrees - 167 Degrees F. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- ECLIPSE 902-488 Knockout Punch and Die Kit,1 45/64" Size - Knockout Punch and Die Kit,1 45/64" Size. Grainger reserves the right to accept or reject any order. Order Acceptance. Grainger Part #:48YD21. Diversion contrary to U.S. law is prohibited. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- ECLIPSE 902-486 Knockout Punch and Die Kit,1 7/64" Size - Knockout Punch and Die Kit,1 7/64" Size. Grainger reserves the right to accept or reject any order. Order Acceptance. Grainger Part #:48YD19. Diversion contrary to U.S. law is prohibited. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- ECLIPSE 902-487 Knockout Punch and Die Kit,1 23/64" Size - Knockout Punch and Die Kit,1 23/64" Size. Grainger reserves the right to accept or reject any order. Order Acceptance. Grainger Part #:48YD20. Diversion contrary to U.S. law is prohibited. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- JOHNSON CONTROLS WHA-PKD3-200C Wiring Harness,6-1/2 Ft. - Water-regulating valve opens on pressure to increase to regulate the flow of water or glycol to water-cooled condenser refrigeration systems. Wiring Harness,6-1/2 Ft. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- WESTWARD 39CE85 Hydraulic Punch Driver Set,Steel Plate - WESTWARD 39CE85. Hydraulic Punch Driver Set, Number of Pieces 13, Capacity 11 ga Steel, Conduit and Pipe Size 1/2 in to 2 in, Workpiece Material Steel, Driver Angle 180 Degrees, Includes (6) Hydraulic Punch Dies, (3) Adaptors, (2) Power Screws, Drill Bit, Carrying Case.
- GRAINGER APPROVED V111 3/4Y Conduit Strap Clamp,Steel,PK10 - GRAINGER APPROVED V111 3/4Y. Conduit Strap Clamp,Steel,PK10. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAP2. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V623 3/8Y Channel Beam C-Clamp,Steel - GRAINGER APPROVED V623 3/8Y. Grainger reserves the right to accept or reject any order. Grainger Part #:2HCJ8. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V349Y Cross Plates,Steel - GRAINGER APPROVED V349Y. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAF8. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- GRAINGER APPROVED V530 3/8Y Channel Bolt,Steel,Overall W 3/4in,PK50 - Channel Bolt,Steel,Overall W 3/4in,PK50. GRAINGER APPROVED V530 3/8Y. Grainger reserves the right to accept or reject any order. Grainger Part #:2HAK3. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- ONE SWT508-SD Computer Wire Peeling Stripping Cutting Machine NEW - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- ONE SWT508-SD Computer Wire Peeling Stripping Cutting Machine Brand new - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- ONE NEW SWT508-SD Computer Wire Peeling Stripping Cutting Machine - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- 1PCS SWT508-SD Computer Wire Peeling Stripping Cutting Machine Brand new - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- ONE NEW SWT508-SD Computer Wire Peeling Stripping Cutting Machine - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- 1PCS NEW SWT508-SD Computer Wire Peeling Stripping Cutting Machine - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- ONE SWT508-SD Computer Wire Peeling Stripping Cutting Machine NEW - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- ONE SWT508-SD Computer Wire Peeling Stripping Cutting Machine NEW - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- 1PCS SWT508-SD Computer Wire Peeling Stripping Cutting Machine Brand new - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- 1PC SWT508-SD Computer Wire Peeling Stripping Cutting Machine NEW - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- ONE NEW SWT508-SD Computer Wire Peeling Stripping Cutting Machine - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- 1PCS SWT508-SD Computer Wire Peeling Stripping Cutting Machine Brand new - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- ONE SWT508-SD Computer Wire Peeling Stripping Cutting Machine NEW - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- 1PC SWT508-SD Computer Wire Peeling Stripping Cutting Machine NEW - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- ONE SWT508-SD Computer Wire Peeling Stripping Cutting Machine Brand new - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- 1PCS SWT508-SD Computer Wire Peeling Stripping Cutting Machine Brand new - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- 1PCS NEW SWT508-SD Computer Wire Peeling Stripping Cutting Machine - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- ONE SWT508-SD Computer Wire Peeling Stripping Cutting Machine NEW - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- 1PCS NEW SWT508-SD Computer Wire Peeling Stripping Cutting Machine - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- 1PC SWT508-SD Computer Wire Peeling Stripping Cutting Machine NEW - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- 1PCS SWT508-SD Computer Wire Peeling Stripping Cutting Machine Brand new - Appropriate stripping wire PVC / Teflon / silicone wire / glass fiber and so on. This product uses the LCD screen dialogue mode, with beautiful appearance, simple operation, maintenance, stable performance, speed, high accuracy and other main features of.
- BURNDY YAD2CM6E14 Ring Terminal,Bare,2 AWG,2 AWG,PK5 - BURNDY YAD2CM6E14. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Order Acceptance. Power adapters and other modifications may be necessary for proper operation in other countries.
- Ratchet Crimp Tool for 22-8 Ga. Heat Shrink Connectors (1 per pack) - Weighs 1.4 lbs. Ratchet Crimp Tool for 22-8 Ga. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. 22-8 Gauge.
- Panduit Rswt75-2 Spiral Wrapping Tool New Sealed Bag - PANDUIT RSWT75-2 SPIRAL WRAPPING TOOL.
- Greenlee 911 Wirecart - Greenlee 911 Wirecart.
- Platinum Tools 13107C PRO Punchdown Impact Tool with 110 & 66 EZ-Data Cut Blade - You are buying a Platinum Tools 13107C PRO Punchdown Impact Tool with 110 & 66 EZ-Data Cut Blade. These were part of a volume purchase and come in a generic box. They have never been used and are in great condition. Have been in a temperature controlled environment. Note: Separate shipping cost for buying multiple quantities at one time MAY apply. We will try to package as many together to save you on shipping for volume customers. Please contact ahead of time to coordinate shipping cost for multiple purchases.
- KNIPEX VDE Socket with Screwdriver Handle 98 03 Inner Hex SELECTION - Steckschlüssel mit Schraubendreher-Griff 98 03. Ergonomisch optimierter 2-Komponenten-Griff für.
- KNIPEX VDE Mouth Wrench, Single Mouth Wrench 98 00 Metric +" TO CHOOSE - Maulschlüssel 98 00. Grundwerkzeug verchromt.
- KNIPEX VDE Socket with T-Handle 98 04 / 98 05 Inner Hex TO CHOOSE - Steckschlüssel mit T-Griff. Spezial-Werkzeugstahl, ölgehärtet.
- PIC GAUGES PRO-301L-402U-01 Pressure Gauge,Stainless Steel,10,000psi - PIC GAUGES PRO-301L-402U-01. This gauge features stainless steel case construction to resist corrosion and impact in demanding applications. Power adapters and other modifications may be necessary for proper operation in other countries.
- PIC GAUGES PRO-301L-402B-01 Pressure Gauge,Stainless Steel,15 psi - PIC GAUGES PRO-301L-402B-01. This gauge features stainless steel case construction to resist corrosion and impact in demanding applications. Power adapters and other modifications may be necessary for proper operation in other countries.
- PIC GAUGES PRO-301L-402V-01 Pressure Gauge,Stainless Steel,15,000psi - PIC GAUGES PRO-301L-402V-01. This gauge features stainless steel case construction to resist corrosion and impact in demanding applications. Power adapters and other modifications may be necessary for proper operation in other countries.
- MONARCH 6281-012 Battery Charging Station,9" H - MONARCH 6281-012. 7 in, Width (In.). 4 in, Height (In.). Battery Charging Station,9" H. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
- ASHCROFT 251009AW02L600# Gauge,Pressure,0 to 600 psi,2-1/2 in. - ASHCROFT 251009AW02L600#. Power adapters and other modifications may be necessary for proper operation in other countries. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited.
- MONOPRICE 9545 Patch Cord,Cat 5e,Flexboot,Black,1.0 ft. - Patch Cord,Cat 5e,Flexboot,Black,1.0 ft. MONOPRICE 9545. Voice and Data Patch Cord. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- DOLPHIN COMPONENTS CORP DC-100-S InsulDsplConn,Blue,Run Tap,PVC,PK100 - InsulDsplConn,Blue,Run Tap,PVC,PK100. DOLPHIN COMPONENTS CORP DC-100-S. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Each of these super B-wire connectors are designed to help users crimp 4 #22 gauge insulated wires in a single step.
- STA-KON B14-6FL Fork Terminal,Tin,Copper,Bare,PK100 - Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- STA-KON 18RA-47PT Pin Terminal,Red,22 AWG,18 AWG,PK100 - Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- HUBBELL HBL23002GB Locking Connector,10A,2P,3W,Gray - HUBBELL HBL23002GB. Locking Connector,10A,2P,3W,Gray. Designed for use with the Hubbellock(R) device, this industrial Hubbellock connector body features a spring-loaded safety shutter to eject the plug if it is not properly locked in.
- BURNDY KSA1/0 Split-Bolt Conn,Tin Pltd,Al,Square Head - Split-Bolt Conn,Tin Pltd,Al,Square Head. BURNDY KSA1/0. Split-Bolt Connector is highly resistant to cracking and corrosion. Provides maximum pressure and a secure connection on all combinations of run and tap conductors.
- BURNDY YA8CTC14 OneHoleLugCmprsnConn,Long,Red,49 - OneHoleLugCmprsnConn,Long,Red,49. BURNDY YA8CTC14. Governing Law; Limitations. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- BURNDY 1PLD2/03 InsulMultitapCon,Unplated,14 AWG,2/0 AWG - InsulMultitapCon,Unplated,14 AWG,2/0 AWG. BURNDY 1PLD2/03. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- BURNDY K3A26U2N MechConn,Aluminum,1/2 in,Slotted - BURNDY K3A26U2N. It features aluminum alloy construction. Power adapters and other modifications may be necessary for proper operation in other countries. Grainger reserves the right to accept or reject any order.
- BURNDY KSA6 Split-Bolt Conn,Tin Pltd,Al,Square Head - BURNDY KSA6. Split-Bolt Conn,Tin Pltd,Al,Square Head. Split-Bolt Connector is highly resistant to cracking and corrosion. Provides maximum pressure and a secure connection on all combinations of run and tap conductors.
- BURNDY 1PL6002 InsulMultitapCon,Unpltd,4 AWG,600 kcmil - InsulMultitapCon,Unpltd,4 AWG,600 kcmil. BURNDY 1PL6002. Governing Law; Limitations. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- BURNDY QDA34 MechConn,Copper,3/4 in,Hex - BURNDY QDA34. It features copper alloy body construction. Power adapters and other modifications may be necessary for proper operation in other countries. Grainger reserves the right to accept or reject any order.
- BURNDY KSA2/0 Split-Bolt Conn,Tin Pltd,Al,Square Head - Split-Bolt Conn,Tin Pltd,Al,Square Head. BURNDY KSA2/0. Split-Bolt Connector is highly resistant to cracking and corrosion. Provides maximum pressure and a secure connection on all combinations of run and tap conductors.
- BURNDY YAD30M20E34 Ring Terminal,Bare,250 kcmil,300 kcmil - BURNDY YAD30M20E34. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Order Acceptance. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- BURNDY YAD8CM4E8 Ring Terminal,Bare,8 AWG,8 AWG,PK10 - BURNDY YAD8CM4E8. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Order Acceptance. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- BURNDY YAD2CM10E38 Ring Terminal,Bare,2 AWG,2 AWG,PK5 - BURNDY YAD2CM10E38. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Order Acceptance. Power adapters and other modifications may be necessary for proper operation in other countries.
- BURNDY YAD2CM16E58 Ring Terminal,Bare,2 AWG,2 AWG,PK5 - BURNDY YAD2CM16E58. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Order Acceptance. Power adapters and other modifications may be necessary for proper operation in other countries.
- BURNDY YAD2CM8E516 Ring Terminal,Bare,2 AWG,2 AWG,PK5 - BURNDY YAD2CM8E516. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Order Acceptance. Power adapters and other modifications may be necessary for proper operation in other countries.
- BURNDY YAD2CM20E34 Ring Terminal,Bare,2 AWG,2 AWG,PK5 - BURNDY YAD2CM20E34. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Order Acceptance. Power adapters and other modifications may be necessary for proper operation in other countries.
- BURNDY YAD30M12E12 Ring Terminal,Bare,250 kcmil,300 kcmil - BURNDY YAD30M12E12. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Order Acceptance. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- BURNDY KSU31 Split-Bolt Conn,Tin Pltd,Cu,Square Head - BURNDY KSU31. Split-Bolt Conn,Tin Pltd,Cu,Square Head. Split-Bolt Connector is highly resistant to cracking and corrosion. Provides maximum pressure and a secure connection on all combinations of run and tap conductors.
- BURNDY YAD27M20E34 Ring Terminal,Bare,3/0 AWG,3/0 AWG - BURNDY YAD27M20E34. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Order Acceptance. Power adapters and other modifications may be necessary for proper operation in other countries.
- BURNDY KSU17 Split-Bolt Conn,Tin Pltd,Cu,Square Head - BURNDY KSU17. Split-Bolt Conn,Tin Pltd,Cu,Square Head. Split-Bolt Connector is highly resistant to cracking and corrosion. Provides maximum pressure and a secure connection on all combinations of run and tap conductors.
- BURNDY YAD1CM16E58 Ring Terminal,Bare,1 AWG,1 AWG - BURNDY YAD1CM16E58. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Order Acceptance. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- THOMAS & BETTS 54715 C Tap,Gray,Copper,600V - THOMAS & BETTS 54715. This C Tap features high-conductivity wrought copper construction, with heavy reinforcing ribs to help locate the compression dies and strengthen the compression joint. They also help to ensure positive, all-around compression with low resistance and high pullout values.
- 20050 Ergonomic Super 4 plus Automatic Wire Stripper for Wires from 0.2Mm-6Mm, 1 - 20050 Ergonomic Super 4 plus Automatic Wire Stripper for Wires from 0.2Mm-6Mm, 16.5Cm L X 14Cm W X 2.7Cm H. Item model number 20050. Adjustable length stopper and a plier handle design with lockable grip.
- DF-8 Handheld Wire Stripping Tool Peeling Machine Stripper Cutter 0-12500RPM - Pro DF-8 handheld Magnet wire Stripping Machine / stripper Cutter 110V. Output Speed. Your satis faction is our ultimate goal. length 5 ~ 50mm. 0.3 ~ 2.5mm.