10pcs AXK0821 Needle Roller Thrust Bearing 8x21x2mm with AS0821 Washers - Description:Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.AXK Thrust Bearings can be combined with washers in the AS series in applications where adjacent components cannot serve as raceways.Made of hardened spring steel, both faces of the washers are polished and can be used as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
S51200 Needle Roller Thrust Bearing 10x26x11mm Stainless Steel with Washers - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51200Material: 420 Stainless SteelInner Diameter: 10mmOuter Diameter: 26mmThickness: 11mmDynamic Load Rating (Cr): 12.7kNStatic Load Rating (Cor): 17.1kNLimiting Speed (Grease): 5700rpmLimiting Speed (Oil): 8800rpmPackage Content:1 x Miniature Thrust Ball Bearing.
5pcs Needle Roller Thrust Bearing 12mm Bore 18mm OD 16mm Width - Specification:Drawn Cup Material: ST14 SteelNeedle Roller Material: Chromium Steel (GCr15)Bore Diameter (Fw): 12mmOutside Diameter (D): 18mmWidth: 16mmStatic Load Capacity (Cor): 11.5kNDynamic Load Capacity (Cr): 9.3kNMaximum Rotational Speed (Oil): 20000rpmNumber of Pack: 5 Pcs Description:-Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness.-These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing.-Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore.
51108 Single Direction Needle Roller Thrust Bearing Flat Seat Chromium - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
INA D11 Ball Thrust Bearing,Grooved,1 1/8in Bore - Ball Thrust Bearing,Grooved,1 1/8in Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4ZZR5. Grainger reserves the right to accept or reject any order.
INA/Andrews 2909 Thrust Ball Bearing Lot of 4 - INA/Andrews 2909 Thrust Ball Bearing Lot of 4. Reference #: 1008217-15AAMfr. Part/Model #: 2909Size: 2.625" x 2.625" x .625"Condition: Surplus NewA/Andrews 2909 Thrust Ball Bearing.Bore: 45mmO.D.: 68mmWidth: 16mm The box is Dusty from storage .We strive to provide all information that we have on hand and do our best to describe and photograph every item.Please make sure that this is the correct Item that you need BEFORE you buy. .Any questions please feel free to ask . Thank you
INA AXK1730 Needle Roll Thrust Brg,1730,17mm Bore - INA AXK1730. Needle Roll Thrust Brg,1730,17mm Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4ZZN7. Grainger reserves the right to accept or reject any order.
INA AXK1226 Needle Roll Thrust Brg,1226,12mm Bore - INA AXK1226. Needle Roll Thrust Brg,1226,12mm Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4ZZN5. Grainger reserves the right to accept or reject any order.
INA D25 Ball Thrust Bearing,Grooved,2 in Bore - Ball Thrust Bearing,Grooved,2 in Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order. Grainger Part #:4ZZT5.
4pcs F10 -18M Miniature Thrust Ball Bearings 10x18x5.5mm Chrome Steel - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F10-18MShaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 10mmOuter Diameter (D): 18mmThickness (B): 5.5mmDynamic Load Rating (Cr): 2.23kNStatic Load Rating (Cor): 2.
4pcs F8-16M Miniature Thrust Ball Bearings 8 x 16 x 5mm Chrome Steel - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F8-16MShaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 8mmOuter Diameter (D): 16mmThickness (B): 5mmDynamic Load Rating (Cr): 2.5kNStatic Load Rating (Cor): 3.
2pcs F6-12M Needle Roller Thrust Bearings 6x12x4.5mm Chrome Steel - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F6-12MShaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 6mmOuter Diameter (D): 12mmThickness (B): 4.5mmDynamic Load Rating (Cr): 1.6kNStatic Load Rating (Cor): 1.
INA AXK2035 Needle Roll Thrust Brg,2035,20mm Bore - INA AXK2035. Needle Roll Thrust Brg,2035,20mm Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4ZZN8. Grainger reserves the right to accept or reject any order.
INA AXK0821-TV Needle Roll Thrust Brg,821,8mm Bore - INA AXK0821-TV. Needle Roll Thrust Brg,821,8mm Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4ZZN3. Grainger reserves the right to accept or reject any order.
AXK0819+2AS Needle Roller Thrust Bearings Washers 8mm Bore Diameter 19mm OD - Description:This Uxcell Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.AXK Thrust Bearings can be combined with washers in the AS series in applications where adjacent components cannot serve as raceways.Made of hardened spring steel, both faces of the washers are polished and can be used as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.Specification:Bearing No.: AXK0819Bearing Washer No.
Bearing KH0824B INA A Recirculation Of Ball, New - KH0824B INA recirculating ball bearing New! Description: Recirculating ball bearing Brand = INA Model = KH0824B Number of ball recirculations = 4 Inner diameter = 8mm Outside diameter = 15mm Length = 24mm Datasheets: https://www.faitgroup.it/wp-content/ uploads/2014/10/LINEAR_CATALOGUE.pdf We do not ship to PO Boxes .
2pcs NTA1625 Thrust Needle Roller Bearings 1x1-9/16x5/64" with TRA1625 Washers - Bearing Washer Model: TRA1625. Bearing Model: NTA1625. Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.
Timken T127-904A1 Thrust Tapered Roller Bearing - Timken T127-904A1 Thrust Tapered Roller Bearing SKU#: 3187. Bearing Type: Thrust Tapered Roller Bearings – TTC. D – Bearing O.D.: 2.625 in, 66.675 mm. T – Bearing Width: 0.7656 in, 19.446 mm. R – Fillet Radius Shaft (Max): 0.03 in, 0.8 mm.
INA D15 Ball Thrust Bearing,Grooved,1 3/8in Bore - Ball Thrust Bearing,Grooved,1 3/8in Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4ZZR9. Grainger reserves the right to accept or reject any order.
INA 81109-TV Cylindrical Thrust Brg,81109,45 mm Bore - Cylindrical Thrust Brg,81109,45 mm Bore. INA 81109-TV. Grainger Part #:4ZZK8. Grainger reserves the right to accept or reject any order. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
INA TC411 Needle Roll Thrust Brg,411,1/4in Bore - Needle Roll Thrust Brg,411,1/4in Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4XFL8. Grainger reserves the right to accept or reject any order.
INA TC2840 Needle Roll Thrust Brg,2840,1 3/4in Bore - INA TC2840. Needle Roll Thrust Brg,2840,1 3/4in Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4XFP2. Grainger reserves the right to accept or reject any order.
INA D12 Ball Thrust Bearing,Groove,1 3/16in Bore - Ball Thrust Bearing,Groove,1 3/16in Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4ZZR6. Grainger reserves the right to accept or reject any order.
INA TC2233 Needle Roll Thrust Brg,2233,1 3/8in Bore - INA TC2233. Needle Roll Thrust Brg,2233,1 3/8in Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4XFN9. Grainger reserves the right to accept or reject any order.
INA AXK1528 Needle Roll Thrust Brg,1528,15mm Bore - INA AXK1528. Needle Roll Thrust Brg,1528,15mm Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4ZZN6. Grainger reserves the right to accept or reject any order.
INA D4 Ball Thrust Bearing,Grooved,11/16in Bore - Ball Thrust Bearing,Grooved,11/16in Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4ZZP7. Grainger reserves the right to accept or reject any order.
INA TC2435 Needle Roll Thrust Brg,2435,1 1/2in Bore - INA TC2435. Needle Roll Thrust Brg,2435,1 1/2in Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4XFP1. Grainger reserves the right to accept or reject any order.
INA TC815 Needle Roll Thrust Brg,815,1/2in Bore - Needle Roll Thrust Brg,815,1/2in Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4XFN2. Grainger reserves the right to accept or reject any order.
INA D3 Ball Thrust Bearing,Grooved,5/8 in Bore - Ball Thrust Bearing,Grooved,5/8 in Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order. Grainger Part #:4ZZP6.
INA D10 Ball Thrust Bearing,Groove,1 1/16in Bore - Ball Thrust Bearing,Groove,1 1/16in Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4ZZR4. Grainger reserves the right to accept or reject any order.
INA AXK3047 Needle Roll Thrust Brg,3047,30mm Bore - INA AXK3047. Needle Roll Thrust Brg,3047,30mm Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4ZZP1. Grainger reserves the right to accept or reject any order.
INA TC4052 Needle Roll Thrust Brg,4052,2 1/2in Bore - INA TC4052. Needle Roll Thrust Brg,4052,2 1/2in Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4XFP5. Grainger reserves the right to accept or reject any order.
INA AXK3552 Needle Roll Thrust Brg,3552,35mm Bore - INA AXK3552. Needle Roll Thrust Brg,3552,35mm Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4ZZP2. Grainger reserves the right to accept or reject any order.
INA TC613 Needle Roll Thrust Brg,613,3/8in Bore - Needle Roll Thrust Brg,613,3/8in Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4XFN1. Grainger reserves the right to accept or reject any order.
2x Airplane Pressure Ball Bearing Slot Bearing Hole 10mm ~ 110mm/51100 to 51322 - Bohrung 10 bis 110 mm Ebendruckkugellager Nutenlager 51100 bis 51322 Neu. Hochwertige Materialien, sicher und zuverlässig. Glatte Bewegung, geringe Reibung, geringe Geräuschentwicklung, hohe Präzision, stabil, Korrosionsbeständigkeit, hohe Temperaturbeständigkeit und lange Lebensdauer.
2x Plane Thrust Ball Bearings Grooved Bearings Bore 10mm ~110mm / 51100 to 51322 - Bore 10 to 110 mm Plane Thrust Ball Bearings Grooved Bearings 51100 to 51322 New. 51100 (10x24x9 mm). 51322 (110x190x63 mm). Each option defaults are 2x bearings. Smooth moving, low friction, low noise,wear resistance, high precision, stable, corrosion resistance, high temperature resistance and long life.
10pcs F10-18M Miniature Thrust Ball Bearing Chrome Steel with Washer 10x18x5.5mm - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F10-18MShaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelInner Diameter (d): 10mmOutside Diameter (OD): 18mmThickness (B): 5.
6pcs 51203 Single Direction Thrust Ball Bearings 17mm x 35mm x 12mm Chrome Steel - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: 51203Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 17 mmOuter Diameter (D): 35 mmThickness (B): 12 mmDynamic Load Rating (Cr): 17.
10pcs F8-22M Needle Roller Thrust Bearing 8x22x7mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
uxcell 51103 Miniature Thrust Ball Bearing 17mm x 30mm x 9mm Chrome Steel wit... - This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must be subjected to any radial load.
uxcell 51105 Miniature Thrust Ball Bearing 25mm x 42mm x 11mm Chrome Steel wi... - This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must be subjected to any radial load.
uxcell 51102 Miniature Thrust Ball Bearing 15mm x 28mm x 9mm Chrome Steel wit... - This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must be subjected to any radial load.
INA AXK2542 Needle Roll Thrust Brg,2542,25mm Bore - INA AXK2542. Needle Roll Thrust Brg,2542,25mm Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4ZZN9. Grainger reserves the right to accept or reject any order.
Fag Thrust Ball Bearing 51/53215 - For sale is a FAG THRUST BALL BEARING 51/53215. The unit appears to be new and unused by the previous owner. Overall the unit appears to be in excellent, new, ready to use condition. The unit includes everything shown in photos.
Fag Thrust Ball Bearing 52215 - For sale is a FAG THRUST BALL BEARING 52215. The unit appears to be new and unused by the previous owner. Overall the unit appears to be in excellent, new, ready to use condition. The unit includes everything shown in photos.
INA 81105-TV Cylindrical Thrust Brg,81105,25 mm Bore - Cylindrical Thrust Brg,81105,25 mm Bore. INA 81105-TV. Grainger Part #:4ZZK4. Grainger reserves the right to accept or reject any order. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
INA D19 Ball Thrust Bearing,Grooved,1 5/8in Bore - Ball Thrust Bearing,Grooved,1 5/8in Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4ZZT3. Grainger reserves the right to accept or reject any order.
51200 Single Direction Thrust Ball Bearings 10mm x 26mm x 11mm Chrome Steel - Model: 51200. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.
INA D8 Ball Thrust Bearing,Grooved,15/16in Bore - Ball Thrust Bearing,Grooved,15/16in Bore. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger Part #:4ZZR2. Grainger reserves the right to accept or reject any order.
T1822S Thrust Bearing, New, Shelf RS9 - Priced them lower than any others. ( They do not have any other markings on them other than the part number). Don't be a.
LS Mtron Thrust Ball Bearing TRG400 40031627 - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
Uzelac Industries Inc. Osborn Drum Thrust Roller A188A8 - Uzelac Industries Inc. Osborn Drum Thrust Roller A188A8. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
Uzelac Industries Inc. Osborn Drum Thrust Roller G6AA - Uzelac Industries Inc. Osborn Drum Thrust Roller G6AA. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
(2-Pk) Brg/Seal Combo Roller Bearing A1228 D 1356K - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
Thrust Ball Bearing 51108 - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
MTK Thrust Ball Bearing 40mm Bore x 60mm 51108 - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
Webb Unground Ball Bearing 9572 - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
3pcs 51204 Single Direction Thrust Ball Bearings 20mm x 40mm x 14mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51204 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 20 mm Outer Diameter (D): 40 mm Thickness (B): 14 mm Dynamic Load Rating (Cr): 22.
Ina D19 Banded Ball Thrust Bearing,Bore 1.625 In - This INA Standard Banded Ball Thrust Bearing is a high-quality product that is built to provide you with a long service life. It is ideal for applications where high radial loads are present and where the direction of rotation is axial.
INA Thrust Bearing D135911990 - Hi up for sale is a INA Thrust Bearing D135911990. See photos for details. Lose Ball Bearings,Bearings,Seals,New Ge Floodlights, Chain Hoist, Crane Hoist, Over Head Cranes. Press breaks, Plate Rolls, Sheer, Welders, Stud Welders, Spot Welders, Welding Coolers, 100's of New Welding leads 50' & 100', Plasma Cutters, Band Saws, Hypotherm Burn Table Plasma Units.
INA Thrust Bearing D135911990 - Hi up for sale is a INA Thrust Bearing D135911990. See photos for details. Lose Ball Bearings,Bearings,Seals,New Ge Floodlights, Chain Hoist, Crane Hoist, Over Head Cranes. Press breaks, Plate Rolls, Sheer, Welders, Stud Welders, Spot Welders, Welding Coolers, 100's of New Welding leads 50' & 100', Plasma Cutters, Band Saws, Hypotherm Burn Table Plasma Units.
10Pcs F10-18M Miniature Planar Bearing Thrust Ball Bearings 0.39x0.71x0.22" - Color:Silver & Yellow Material:Steel & Copper Size:1.6x0.5cm/0.63x0.20inch Weight:52g Package list:10Pcs Miniature Plane Bearing Feature: 1.The material of the cage is copper. The plane thrust ball is a separable bearing with a contact angle of 90. It can be installed separately and can only bear load. 2.The limit speed of the thrust bearing is low, and the steel ball is squeezed to the outside of the raceway by centrifugal force, which is easy to scratch, but it is not suitable for high-speed operation..
10Pcs F5-10M Miniature Planar Bearing Thrust Ball Bearings 0.20x0.39x0.16" - Color:Silver & Yellow Material:Steel & Copper Size:1x0.4cm/0.39x0.16inch Weight:16g Package list:10Pcs Miniature Plane Bearing Feature: 1.The material of the cage is copper. The plane thrust ball is a separable bearing with a contact angle of 90. It can be installed separately and can only bear load. 2.The limit speed of the thrust bearing is low, and the steel ball is squeezed to the outside of the raceway by centrifugal force, which is easy to scratch, but it is not suitable for high-speed operation..
INA Thrust Bearing D135911990 - Hi up for sale is a INA Thrust Bearing D135911990. See photos for details. Lose Ball Bearings,Bearings,Seals,New Ge Floodlights, Chain Hoist, Crane Hoist, Over Head Cranes. Press breaks, Plate Rolls, Sheer, Welders, Stud Welders, Spot Welders, Welding Coolers, 100's of New Welding leads 50' & 100', Plasma Cutters, Band Saws, Hypotherm Burn Table Plasma Units.
10Pcs F5-10M Miniature Planar Bearing Thrust Axial Ball Bearings 5x10x4mm - Note: The color of the item may vary slightly due to photography and your own computer Feature: 1.Hardened and tempered,steel and copper construction. 2.High quality and great for eliminating installation errors. 3.Designed to make lasting performance. 4.Used in replacing the damaged Ball Bearings in devices to improve efficiency and save energy. 5.Can be installed separately and only bear load,the touch angle is 90 degree. 6.With less coefficient of friction, less vibration and noise. Note:The outer ring is made of bearing steel, and the cage is made of copper Specification: Product Name: Thrust Bearings Material: Steel and Copper.
(6-Pk) Corken Thrust Bearing Z2000/Z3200 4432 - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
New NOS INA Thrust Bearing Part Number 4110AW - Part number 4110AW. INA thrust bearing. In original box (box shows wear). Signs of wear / dirty from storage. We may have it in inventory that hasn't been added yet.
51100 Series Needle Roller Thrust Bearing Complete With 2 AS Washers-Choose Size - Product Information: Name: 304 stainless steel thrust ball bearing Number of scroll columns: single column Material of rolling bearing seat: 304 stainless steel Package Including: According to your choice. Other accessories are not included.
Lot of 2 PCS of 51104 Single Direction Thrust Ball Bearings Flat Seat Chromium 2 - Model: 51104. Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. The separable components of thrust ball bearings are interchangeable.
American Sanders Stem Bearing 51128A - The product image is the actual item you will receive including all contents unless otherwise noted. We are not an authorized dealer of this product. This product has no manufacturers warranty.
Eaton Thrust Bearing 220HC104 - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
FAG Self-Aligning Thrust Bearing Single Row 5700LBF Dynamic Load Cap 53206 - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
898E MRC New Thrust Ball Bearing - We will respond promptly and get you the answers you need. Everything is sold as is as seen. · Instant transfer from your bank account (if eligible).
Andrews MPB Thrust Bearing FT016 - We will respond promptly and get you the answers you need. Everything is sold as is as seen. · Instant transfer from your bank account (if eligible).
Lot of 4 PCS of 51104 Single Direction Thrust Ball Bearings Flat Seat... - Model: 51104. Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. The separable components of thrust ball bearings are interchangeable.
Ina Tc1828 Needle Thrust Bearing,Bore 1.125 In - Zoro Select 3Zrv1 Tarp, 12 X 16 Ft, 5.1 Mil, Polyethylene, Standard Duty. Zoro Select 6Ba28 Class 8.8, M10-1.25 Hex Head Cap Screw, Zinc Plated Steel, 35. Zoro Select U08280.037.0200 Lag Screws, 3/8 In X 2 In, Zinc Plated Steel Hex.
4pcs F5-10M Miniature Needle Roller Thrust Ball Bearings 5x10x4mm Chrome Steel - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F5-10MShaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 5mmOuter Diameter (D): 10mmThickness (B): 4mmDynamic Load Rating (Cr): 0.95kNStatic Load Rating (Cor): 0.
10pcs AXK1226 Thrust Needle Roller Bearings 12x26x2mm with AS1226 Washers - Description:Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.AXK Thrust Bearings can be combined with washers in the AS series in applications where adjacent components cannot serve as raceways.Made of hardened spring steel, both faces of the washers are polished and can be used as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
AXK80105+2AS Needle Roller Thrust Bearings Washers 80mm Bore Dia 105mm OD - Description:These Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings accommodate heavy peak loads due to the small diameter deviation of the rollers within one assembly.Thrust Bearings can be combined with washers in applications where adjacent components cannot serve as raceways.Made of hardened spring steel, both faces of the washers are polished and can be used as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.Specification:Bearing No.: AXK80105Bearing Washer No.
5pcs RC081208 Needle Roller Thrust Bearing 1/2" Bore 3/4" OD 1/2" Width - Specification:Model: RC081208Drawn Cup Material: ST14 SteelNeedle Roller Material: Chromium Steel (GCr15)Bore Diameter (Fw): 1/2"Outside Diameter (D): 3/4"Width: 1/2"Torque: 7.9N*mNumber of Pack: 5 Pcs Description:-Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness.-These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing.-Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore.-For various applications such as agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.
2pcs AXK1024+2AS Needle Roller Thrust Bearings with 2 Washers 10x24x4mm - 1.This Uxcell Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.2.These bearings to accommodate heavy loads and peak loads due to small diameter deviation of the rollers within one assembly.3.AXK Thrust Bearings can be combined with washers in the AS series in applications where adjacent components cannot serve as raceways.4.Made of hardened spring steel, both faces of the washers are polished and can be used as raceways.5.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
3pcs TC512 Needle Roller Thrust Bearings with Washers 5/16" Bore 3/4" OD 5/64" - Description:This Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.Thrust Bearings can be combined with washers in applications where adjacent components cannot serve as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others. Specification:Bearing No.: TC512+2TRANeedle Roller Material: Chromium Steel (GCr15)Cage Material: ST14 SteelBore Diameter (d): 5/16" / 7.92mmOutside Diameter (D): 3/4" / 19.
5pcs Needle Roller Thrust Bearing 10mm Bore 14mm OD 12mm Width - Specification:Drawn Cup Material: SteelCage Material: SteelNeedle Roller Material: Chrome SteelBore Diameter: 10mmOutside Diameter: 14mmWidth: 12mmTorque: 5.3N*mRotating Shaft Limiting Speed: 14000rpmRotating Outer Ring Limiting Speed: 11000rpmPackage Contents: 5pcs Description:-They are compact bearings with high load carrying capacity and stiffness.-Suitable for high dynamic loads or radial-limited installation. They are mounted in housings with a tight interference fit.-Used in a variety of applications such as agricultural and construction equipment, pumps and compressors, and two-stroke engines.Notice: Use a press or special tool (not a hammer) for installation, as the run out may cause local deformation or brittle breakage.
5pcs Needle Roller Thrust Bearing 16mm Bore 22mm OD 16mm Width - Specification:Drawn Cup Material: SteelCage Material: SteelNeedle Roller Material: Chrome SteelBore Diameter: 16mmOutside Diameter: 22mmWidth: 16mmTorque: 20.5N*mRotating Shaft Limiting Speed: 8500rpmRotating Outer Ring Limiting Speed: 7500rpmPackage Contents: 5pcs Description:-They are compact bearings with high load carrying capacity and stiffness.-Suitable for high dynamic loads or radial-limited installation. They are mounted in housings with a tight interference fit.-Used in a variety of applications such as agricultural and construction equipment, pumps and compressors, and two-stroke engines.Notice: Use a press or special tool (not a hammer) for installation, as the run out may cause local deformation or brittle breakage.
5pcs AXK0619 Needle Roller Thrust Bearings 6x19x2mm with AS0619 Washers - Description:Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.AXK Thrust Bearings can be combined with washers in the AS series in applications where adjacent components cannot serve as raceways.Made of hardened spring steel, both faces of the washers are polished and can be used as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
2pcs S51103 Needle Roller Thrust Bearing 17x30x9mm Stainless Steel with Washers - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51103Material: 420 Stainless SteelInner Diameter: 17mmOuter Diameter: 30mmThickness: 9mmDynamic Load Rating (Cr): 10.8NStatic Load Rating (Cor): 18.2NLimiting Speed (Grease): 6100rpmLimiting Speed (Oil): 9400rpmPackage Content:2 x Miniature Thrust Ball Bearings.
5pcs AXK0821 Needle Roller Thrust Bearings 8x21x2mm with AS0821 Washers - Description:Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.AXK Thrust Bearings can be combined with washers in the AS series in applications where adjacent components cannot serve as raceways.Made of hardened spring steel, both faces of the washers are polished and can be used as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
10pcs Needle Roller Thrust Bearing 6mm Bore 10mm OD 8mm Width - Specification:Drawn Cup Material: PA66Cage Material: SteelNeedle Roller Material: Chrome SteelBore Diameter: 6mmOutside Diameter: 10mmWidth: 8mmTorque: 1.5N*mRotating Shaft Limiting Speed: 20000rpmRotating Outer Ring Limiting Speed: 11000rpmPackage Contents: 10pcs Description:-They are compact bearings with high load carrying capacity and stiffness.-Suitable for high dynamic loads or radial-limited installation. They are mounted in housings with a tight interference fit.-Used in a variety of applications such as agricultural and construction equipment, pumps and compressors, and two-stroke engines.Notice: Use a press or special tool (not a hammer) for installation, as the run out may cause local deformation or brittle breakage.
10pcs F6-12M Needle Roller Thrust Bearing 6x12x4.5mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F6-12MShaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelInner Diameter (d): 6mmOutside Diameter (OD): 12mmThickness (B): 4.
uxcell F8-19M Thrust Ball Bearings 8mm x 19mm x 7mm Chrome Steel Single 10pcs - Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. [FEATURES] - The separable components of thrust ball bearings are interchangeable. Low noise and long service life, easy to maintain.
NTN Bearing 51100 Thrust Ball Bearing 10 mm Bore ID 24 mm OD 9 mm Width - This is a new NTN Bearing 51100 Thrust Ball Bearing, Extra Light Series, Single Direction, Flat Seat, Steel Cage, 10 mm Bore ID, 24 mm OD, 9 mm Width, Open. Bearing Number 51100. Dynamic Load Capacity 10000 kilograms.
MRC Bearing Thrust Bearing , MRC7219PDU - Model: MRC7219PDU. MPN: MRC7219PDU. Small orders are no problem. Be sure to add us to yourfavorites list ! Lot# BK114 C40.
New Ina Bearing Sch1612 - INA BEARING. NEW, in box. NEW, no box. NEW, old inventory. When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Warranty Information.
2pcs 51100 Single Direction Thrust Ball Bearings 10mm x 24mm x 9mm Chrome Steel - Specification: Model: 51100 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 10 mm Outer Diameter (D): 24 mm Thickness (B): 9 mm Dynamic Load Rating (Cr): 10kN Static Load Rating (Cor): 14kN Limiting Speed (Grease): 6500rpm Limiting Speed (Oil): 10000rpm Accuracy Class: P5 Number of Pack: 2 Pcs.
Benelli Fifth Wheel Cage Axial 0400070018000 Qty 6 - MON-FRI 8: 30-12: 00 13: 30-17: 30 FOR MESSAGES SENT AFTER 5 PM WE WILL REPLY THE DAY AFTER BENELLI Axial cage washer 0400070018000 qty 6 BENELLI Axial cage washer 0400070018000 qty 6 For combined shipments, add the products to the cart and click on "request invoice from seller". Payment Payment options are specified on the order page. Contact us if you have any questions or concerns about it. .
51101 SKF New Thrust Ball Bearing - We will respond promptly and get you the answers you need. Everything is sold as is as seen. · Instant transfer from your bank account (if eligible).
AXK3047 Needle Roller Thrust Bearings 30x47x2mm with 2 Washers Chrome Steel - Description:This Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings to accommodate heavy axial loads and peak loads due to the small diameter deviation of the rollers within one assembly.AXK Thrust Bearings can be combined with washers in the AS series in applications where adjacent components cannot serve as raceways.Made of hardened spring steel, both faces of the washers are polished and can be used as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, ect.
Ezo F5-12M Thrust Bearing,5Mmbore Dia,Grooved,204Lb - Tanis Rpvc311036 Stapled Set Strip Brush,Pvc,Length 36 In. Zoro Select Ctb 18B Protective Leg Tip,Slipon,Rd,3/4",Pk25. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes.
Ina Tc1018/0-5-Hla Needle Thrust Bearing,Bore.625 In - Bessey Lc4 4 In Bar Clamp Steel Handle And 2 3/8 In Throat Depth. Ideal 30-3029 Diagonal Cutters,8 In. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose.
Ina D10 Banded Ball Thrust Bearing,Bore 1.053 In - Hart 3102-4 Stem Insert,1/4 In. Techniks 04546Is Collet Set,Er32,1/32 In.,18 Pcs. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose.
T101/904A1 Thrust Tapered Roller Bearings 1.01" Bore 2" O.D. 0.625" Width - Description:Tapered roller thrust bearings are designed to accommodate heavy loads and peak loads.These bearings are very stiff and require little space.This bearing is for use in high-load, moderate-speed applications that include conveyor systems.Specification:Model: T101/904A1Material: Chrome SteelBore Diameter: 25.654mm / 1.01"Outside Diameter: 50.8mm / 2"Total Thickness: 15.875mm / 0.625".
(5) 12x26x2mm Thrust Needle Roller Bearing AXK1226 ABEC-1 Each With 2 Washers - Product Item:12x26x2mm Thrust Needle Roller Bearing AXK1226 Each With Two Washers. Width/Thickness(Bearing with two washers):4mm. One Bearing Set:(1 bearing + 2washers). Width/Thickness(Bearing):2mm. All products are quality checked.
K242810 24 x 28 x 10mm ABEC1 Radial Needle Bearing Needle Cages Bearings - Product Item:ABEC1 K242810 Radial Needle Bearing K 24 x 28 x 10mm Needle Cages Bearings. Accuracy Class:ABEC1. Width/Thickness(Bearing):10mm. Otherwise deal is final. We will be happy to resolve any issues you may have in a cordial and friendly manner.
K252917 25 x 29 x 17mm ABEC1 Radial Needle Bearing Needle Cages Bearings - Product Item:ABEC1 K252917 Radial Needle Bearing K 25 x 29 x 17mm Needle Cages Bearings. Accuracy Class:ABEC1. Width/Thickness(Bearing):17mm. Otherwise deal is final. We will be happy to resolve any issues you may have in a cordial and friendly manner.
K202410 20 x 24 x 10mm ABEC1 Radial Needle Bearing Needle Cages Bearings - Product Item:ABEC1 K202410 Radial Needle Bearing K 20 x 24 x 10mm Needle Cages Bearings. Accuracy Class:ABEC1. Width/Thickness(Bearing):10mm. Otherwise deal is final. We will be happy to resolve any issues you may have in a cordial and friendly manner.
K162010 16 x 20 x 10mm ABEC1 Radial Needle Bearing Needle Cages Bearings - Product Item:ABEC1 K162010 Radial Needle Bearing K 16 x 20 x 10mm Needle Cages Bearings. Accuracy Class:ABEC1. Width/Thickness(Bearing):10mm. Otherwise deal is final. We will be happy to resolve any issues you may have in a cordial and friendly manner.
5pcs K081110 8 x 11 x 10mm ABEC1Radial Needle Bearing Needle Cages Bearings - Product Item:ABEC1 K081110 Radial Needle Bearing K 8 x 11 x 10mm Needle Cages Bearings. Width/Thickness(Bearing):10mm. Otherwise deal is final. We will be happy to resolve any issues you may have in a cordial and friendly manner.
K505520 50 x 55 x 20mm Radial Needle Bearing ABEC1 K Needle Cages Bearings - Product Item:ABEC1 K505520 Radial Needle Bearing K 50 x 55 x 20mm Needle Cages Bearings. Accuracy Class:ABEC1. Width/Thickness(Bearing):20mm. Otherwise deal is final. We will be happy to resolve any issues you may have in a cordial and friendly manner.
K303718 30 x 37 x 18mm ABEC1 Radial Needle Bearing Needle Cages Bearings - Product Item:ABEC1 K303718 Radial Needle Bearing K 30 x 37 x 18mm Needle Cages Bearings. Accuracy Class:ABEC1. Width/Thickness(Bearing):18mm. Otherwise deal is final. We will be happy to resolve any issues you may have in a cordial and friendly manner.
K253216 25 x 32 x 16mm ABEC1 Radial Needle Bearing Needle Cages Bearings - Product Item:ABEC1 K253216 Radial Needle Bearing K 25 x 32 x 16mm Needle Cages Bearings. Accuracy Class:ABEC1. Width/Thickness(Bearing):16mm. Otherwise deal is final. We will be happy to resolve any issues you may have in a cordial and friendly manner.
Ina D1 Banded Ball Thrust Bearing,Bore 1/2 In - Zoro Select 8Vuj6 Hazard Marking Tape,Roll,4In W,180 Ft. L. Zoro Select 2Erp5 Warning Light,Strobe Tube,Amber,120Vac. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes.
Nib Aetna 1009 Thrust Bearing (278-3) - NOTE All drives must to be connected to power for at least 4 hours prior to operation. If this action is not taken, it can ruin the drive. Be sure to add us to your favorites list !
Ina Akl.D25-Hlg Banded Ball Thrust Bearing,Bore 2 In - Buckhorn Sw4815080201000 Straight Wall Container, Gray, Polyethylene, 48 In L. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
51117 51220 51318 51414 51217 Series Thrust Bearing 3 Parts Bearing High Quality - The material is bearing steel, durable, high temperature resistance, high speed, low chestnut sound. Material: bearing steel. Product material: bearing steel. Product size: full range of countries. There are related products below this product.
51110 - 51314 Thrust Bearing Series 3 Parts Bearing High Quality Thrust Bearing - The material is bearing steel, durable, high temperature resistance, high speed, low chestnut sound. Material: bearing steel. Product material: bearing steel. Product size: full range of countries. There are related products below this product.
3 Parts Bearing Axial Thrust Ball Bearings F3 F4 F5 F6 F7 F8 F9 F10High Quality - Types: F3 F4 F5 F6 F7 F8 F9 F10. The material is bearing steel, durable, high temperature resistance, high speed, low chestnut sound. Material: bearing steel. Product material: bearing steel. There are related products below this product.
Ina Axk4565/0-5-Hla Needle Thrust Roller Bearing,Bore 45Mm - Flex-Hone Tool Bc30018 Bc30018 Flex-Hone, 3.000" (76.2Mm) Bore, 8" Oal, 180. Wiegmann N1c121206 Nema 1 12.0 In H X 12.0 In W X 6.0 In D Wall Mount Enclosure. & Recepticles. Electrical Outlets. Light Industrial.
51100 - 51218 Thrust Ball Bearings - ALL SIZES IN HERE - Available in all sizes from small 51100 to large 51218. New range of high quality thrust ball bearings. Thrust ball bearing. 1X THRUST BALL BEARING. -Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.
Thrust Ball Bearing Miniature High Precision Flat Steel Bearings 3 Part-ALL Size - Product Information: Name: Flat Thrust Ball Bearings Product size: complete size, please contact customer service for details. Product material: bearing steel Product use: general Size:Please refer to the table below for specification details, or contact customer service! Package Including: According to your choice. Other accessories are not included.
Ina D9 Banded Ball Thrust Bearing,Bore 1.000 In - Ntn 6010Lluc3/L627 Radial Bearing,Double Seal,50Mm Bore. Usa Sealing Zbolt-393 1/2"-13 Hex Head Cap Screw, Plain 18-8 Stainless Steel. Usa Sealing Zbolt-390 Class 2A, 3/8"-16 Hex Head Cap Screw, Plain 18-8.
SKF - 7230 BG222M Angular Contact Bearing, 270 x 150 x 45mm, 40° Angle (NEW) - PN: 7230 BG222B. We can not get an accurate freight quote without out all this information. Pre-Load: 500 Lb. Outer Ring Width: 45 mm. Baltimore and surrounding areas since 1996. But with our eyes now open we put a lot of effort in bringing you high end industrial and electrical parts as well.
AXK3552+2AS Needle Roller Thrust Bearing Washers 35mm Bore Diameter 52mm OD - Description:These Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings accommodate heavy peak loads due to the small diameter deviation of the rollers within one assembly.Thrust Bearings can be combined with washers in applications where adjacent components cannot serve as raceways.Made of hardened spring steel, both faces of the washers are polished and can be used as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.Specification:Bearing No.: AXK3552Bearing Washer No.
2pcs 51101 Needle Roller Thrust Bearing 12mm x 26mm x 9mm Chrome Steel - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: 51101Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 12 mmOuter Diameter (D): 26 mmThickness (B): 9 mmDynamic Load Rating (Cr): 10.
AXK5578+2AS Needle Roller Thrust Bearings Washers 55mm Bore Diameter 78mm OD - Description:These Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings accommodate heavy peak loads due to the small diameter deviation of the rollers within one assembly.Thrust Bearings can be combined with washers in applications where adjacent components cannot serve as raceways.Made of hardened spring steel, both faces of the washers are polished and can be used as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.Specification:Bearing No.: AXK5578Bearing Washer No.
5pcs HK2512 Needle Roller Thrust Bearing 25mm Bore Dia 32mm OD 12mm Width - Description:Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness.These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing.Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore.For various applications such as agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.NOTE: Install with press machine or special tools instead of hammers because beating may lead to local deformation.
4pcs F12-21M Thrust Ball Bearings 12mm x 21mm x 5mm Chrome Steel - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F12-21MShaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 12mmOuter Diameter (D): 21mmThickness (B): 5mmDynamic Load Rating (Cr): 2.1kNStatic Load Rating (Cor): 2.
3pcs TC411 Thrust Needle Roller Bearings with Washers 1/4" Bore 11/16" OD 5/64" - Description:This Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.Thrust Bearings can be combined with washers in applications where adjacent components cannot serve as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others. Specification:Bearing No.: TC411+2TRANeedle Roller Material: Chromium Steel (GCr15)Cage Material: ST14 SteelBore Diameter (d): 1/4" / 6.35mmOutside Diameter (D): 11/16" / 17.
10pcs F3-8M Miniature Thrust Ball Bearing 3x8x3.5mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F3-8MShaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelInner Diameter (d): 3mmOutside Diameter (OD): 8mmThickness (B): 3.
10pcs F8-19M Needle Roller Thrust Bearing 8x19x7mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
S51101 Needle Roller Thrust Bearing 12x26x9mm Stainless Steel with Washers - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51101Material: 420 Stainless SteelInner Diameter: 12mmOuter Diameter: 26mmThickness: 9mmDynamic Load Rating (Cr): 10.3kNStatic Load Rating (Cor): 15.4kNLimiting Speed (Grease): 6500rpmLimiting Speed (Oil): 10000rpmPackage Content:1 x Miniature Thrust Ball Bearing.
S51107 Needle Roller Thrust Bearing 35x52x12mm Stainless Steel with Washers - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51107Material: 420 Stainless SteelInner Diameter: 35mmOuter Diameter: 52mmThickness: 12mmDynamic Load Rating (Cr): 20.4kNStatic Load Rating (Cor): 44.7kNLimiting Speed (Grease): 3900rpmLimiting Speed (Oil): 6000rpmPackage Content:1 x Miniature Thrust Ball Bearing.
S51205 Needle Roller Thrust Bearing 25x47x15mm Stainless Steel with Washers - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51205Material: 420 Stainless SteelInner Diameter: 25mmOuter Diameter: 47mmThickness: 15mmDynamic Load Rating (Cr): 27.8kNStatic Load Rating (Cor): 50.4kNLimiting Speed (Grease): 3600rpmLimiting Speed (Oil): 5500rpmPackage Content:1 x Miniature Thrust Ball Bearing.
2pcs Thrust Ball Bearings 15mm x 28mm x 9mm Chrome Steel ABEC3 Single Row Roller - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: 51102Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 15 mmOuter Diameter (D): 28 mmThickness (B): 9 mmDynamic Load Rating (Cr): 10.5kNStatic Load Rating (Cor): 16.
5pcs Needle Roller Thrust Bearing 8mm Bore 12mm OD 12mm Width - Specification:Drawn Cup Material: SteelCage Material: SteelNeedle Roller Material: Chrome SteelBore Diameter: 8mmOutside Diameter: 12mmWidth: 12mmTorque: 3.15N*mRotating Shaft Limiting Speed: 17000rpmRotating Outer Ring Limiting Speed: 12000rpmPackage Contents: 5pcs Description:-They are compact bearings with high load carrying capacity and stiffness.-Suitable for high dynamic loads or radial-limited installation. They are mounted in housings with a tight interference fit.-Used in a variety of applications such as agricultural and construction equipment, pumps and compressors, and two-stroke engines.Notice: Use a press or special tool (not a hammer) for installation, as the run out may cause local deformation or brittle breakage.
5pcs F4-10M Thrust Ball Bearings Chrome Steel Single Direction 4mm x 10mm x 4mm - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
1-5pcs AXK0619 AXK0821 to AXK5578 Thrust Needle Roller Bearing with 2AS Washers - Model: AXK0619 to AXK5578. AXK0619 6x19x2mm. AXK0821 8x21x2mm. AXK5578 55x78x3mm. Thrust Needle Roller Bearing with 2AS Washers. Size: ID OD Thickness(without 2 washers). Material:Bearing Steel. We can work together to resolve and dispute.
NTA1423 Needle Roller Thrust Bearing 7/8x1-7/16x5/64" with TRA1423 Washers - Description:Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.AXK Thrust Bearings can be combined with washers in the TRA series in applications where adjacent components cannot serve as raceways.Made of hardened spring steel, both faces of the washers are polished and can be used as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
3pcs TC613+2TRA Needle Roller Thrust Bearing with Washers 3/8"x13/16"x5/64" - Description:This Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.Thrust Bearings can be combined with washers in applications where adjacent components cannot serve as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others. Specification:Bearing No.: TC613+2TRANeedle Roller Material: Chromium Steel (GCr15)Cage Material: ST14 SteelBore Diameter (d): 3/8" / 9.525mmOutside Diameter (D): 13/16" / 20.
AXK2035+2AS Needle Roller Thrust Bearings Washers 20mm Bore Diameter 35mm OD - Specification:Bearing Model: AXK2035Bearing Washer Model: AS2035Needle Roller Material: Chromium Steel (GCr15)Cage Material: ST13 SteelBearing Washer Material: 65Mn Spring SteelBore Diameter (d): 20mmOutside Diameter (D): 35mmBearing Thickness (T1): 2mmWasher Thickness (T2): 1mmTotal Thickness: 4mmDynamic Load Capacity (Cr): 12.9kNStatic Load Capacity (Cor): 45.6kNMaximum Rotational Speed (Oil): 8500rpmPackage Contents:1 x Bearings2 x Bearing WashersDescription:Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.
AXK1528+2AS Needle Roller Thrust Bearings Washers 15mm Bore Diameter 28mm OD - Description:This Uxcell Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.AXK Thrust Bearings can be combined with washers in the AS series in applications where adjacent components cannot serve as raceways.Made of hardened spring steel, both faces of the washers are polished and can be used as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others. Specification:Bearing No.: AXK1528Bearing Washer No.
F6000 ZZ Miniature Flanged Deep Groove Ball Bearings 12*26*8mm - Product Information: Name: Bearing with flange Material: bearing steel Model: complete specifications made in China Features: high precision, low noise Usage scenarios: all kinds of industrial equipment Package Including: According to your choice. Other accessories are not included.
Auburn Ball Thrust Bearing T101 | ACG 1-3/4 - Auburn Ball Thrust Bearing. Very Old Box but Bearing in new working condition. Bearing was sealed in anti-rust wrap after pictures.
5pcs AXK1024 Needle Roller Thrust Bearings with Washers 10mm Bore 24mm OD 2mm - Description:Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.AXK Thrust Bearings can be combined with washers in the AS series in applications where adjacent components cannot serve as raceways.Made of hardened spring steel, both faces of the washers are polished and can be used as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
T-311 Thrust Bearing - T-311 Timken Thrust Bearing. Missing one roller. Ships from a USA Warehouse!
10pcs AXK0819 Needle Roller Thrust Bearings with Washers 8mm x 19mm x 2mm - Description:Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.AXK Thrust Bearings can be combined with washers in the AS series in applications where adjacent components cannot serve as raceways.Made of hardened spring steel, both faces of the washers are polished and can be used as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
3pcs Thrust Ball Bearings 15mm x 28mm x 9mm Chrome Steel ABEC3 Single Row Roller - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: 51102Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 15 mmOuter Diameter (D): 28 mmThickness (B): 9 mmDynamic Load Rating (Cr): 10.5kNStatic Load Rating (Cor): 16.
Thrust Bearings Ball 60mm x 85mm x 17mm Chrome Steel ABEC3 Single Row Roller - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: 51112Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 60 mmOuter Diameter (D): 85 mmThickness (B): 17 mmDynamic Load Rating (Cr): 41.
2pcs Thrust Ball Bearings 35mm x 52mm x 12mm Chrome Steel Single Row Roller - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: 51107Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 35 mmOuter Diameter (D): 52 mmThickness (B): 12 mmDynamic Load Rating (Cr): 20.4kNStatic Load Rating (Cor): 44.
10pcs AXK1024 Needle Roller Thrust Bearings 10x24x2mm with AS1024 Washers - Description:Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.AXK Thrust Bearings can be combined with washers in the AS series in applications where adjacent components cannot serve as raceways.Made of hardened spring steel, both faces of the washers are polished and can be used as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
4pcs AXK1226 Needle Roller Thrust Bearings with Washers 12mm x 26mm x 2mm - Description:Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.AXK Thrust Bearings can be combined with washers in the AS series in applications where adjacent components cannot serve as raceways.Made of hardened spring steel, both faces of the washers are polished and can be used as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
2pcs NTA1625 Thrust Needle Roller Bearings 1x1-9/16x5/64" with TRA1625 Washers - Description:Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.AXK Thrust Bearings can be combined with washers in the TRA series in applications where adjacent components cannot serve as raceways.Made of hardened spring steel, both faces of the washers are polished and can be used as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others.
2pcs Thrust Ball Bearings 40mm x 60mm x 13mm Chrome Steel Single Row Roller - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: 51108Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 40 mmOuter Diameter (D): 60 mmThickness (B): 13 mmDynamic Load Rating (Cr): 26.9kNStatic Load Rating (Cor): 62.
51103 Miniature Thrust Ball Bearing 17x30x9mm Chrome Steel with Washer 10pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F2-6M Miniature Thrust Ball Bearing 2x6x3mm Chrome Steel with Washer 10Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
*New*Kingsbury Ki-002154 A-3383 Shoe Thrust Bearing*Warranty* - Award winning products and world class customer service! Buy with SUPREME CONFIDENCE. We pride ourselves on our INTEGRITY and HONESTY. As always WARRANTY on every product. NO HASSLE GUARANTEED. View our HUGE selection or contact us ANYTIME by checking out our store. Thanks for viewing! WE CONSIDER REASONABLE OFFERS WITH BUY IT NOW!
10pcs F5-10M Miniature Thrust Bearing Ball 5x10x4mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
3pcs Thrust Ball Bearings 17mm x 30mm x 9mm Chrome Steel ABEC3 Single Row Roller - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: 51103Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 17 mmOuter Diameter (D): 30 mmThickness (B): 9 mmDynamic Load Rating (Cr): 10.8kNStatic Load Rating (Cor): 18.
2pcs TC411 Thrust Needle Roller Bearings with Washers 1/4" Bore 11/16" OD 5/64" - Description:This Needle Roller Thrust Bearings provide a high degree of stiffness within a minimum axial space. It has a smaller cross-section than a standard thrust bearing for use in restricted spaces.These bearings to accommodate heavy axial loads and peak loads due to small diameter deviation of the rollers within one assembly.Thrust Bearings can be combined with washers in applications where adjacent components cannot serve as raceways.Rolling bearings are used in a range of applications from agricultural machinery to conveying equipment, robotics, elevators, rolling mills, ship rudder shafts, and aggregate crushers, among others. Specification:Bearing No.: TC411+2TRANeedle Roller Material: Chromium Steel (GCr15)Cage Material: ST14 SteelBore Diameter (d): 1/4" / 6.35mmOutside Diameter (D): 11/16" / 17.
2pcs Single Direction Thrust Ball Bearings 20mm x 35mm x 10mm Chrome Steel - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: 51104Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 20 mmOuter Diameter (D): 35 mmThickness (B): 10 mmDynamic Load Rating (Cr): 14.2kNStatic Load Rating (Cor): 24.
SKF - 6216 NRJEM - Radial/DEEP GROOVE Ball Bearing - 80mm x 140mm x 26mm - (NEW) - Part #: 6216 NRJEM. Radial / Deep Groove Ball Bearing. Radial/Deep Groove Ball Bearing - Round Bore, 80 mm ID, 140 mm OD, 26 mm Width, Open, C3 Internal Clearance. Single Row Deep Groove Ball Bearing, open, steel cage, C3 fit, snap ring and grove, Electric Motor Quality.
SKF - 6214 2ZJEM - Radial/DEEP GROOVE Ball Bearing - 70mm x 125mm x 24mm - (NEW) - Part #: 6214 2ZJEM. 6214 2ZJEM. Radial / Deep Groove Ball Bearing. Radial/Deep Groove Ball Bearing - Round Bore, 70 mm ID, 125 mm OD, 24 mm Width, Double Shielded, C3 Internal Clearance. Single Row Deep Groove Ball Bearing, steel cage, C3 fit, 2 shields, Electric Motor Quality.
51203 Single Direction Thrust Ball Bearings Flat Seat Chromium,17x35x12mm 3pcs - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
Nsk Thrust Ball Bearing 51204 - LOAD DIRECTION - THRUST. BEARING STYLE - OPEN TYPE. TYPE-THUST BALL. YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE.
Precision Consolidated Thrust Bearing 51105 - MODEL NO. 51105. BASIC DYNAMIC LOAD - STANDARD. YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE. OUTER ING SHAPE - FLAT.
F8-16M Miniature Thrust Ball Bearings 8x16x5mm Chrome Steel with Washers 2 Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F8-16MShaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15)Cage Material: Stamping SteelInner Diameter (d): 8mmOutside Diameter (OD): 16mmThickness (B): 5mmDynamic Load Rating (Cr): 1.6kNStatic Load Rating (Cor): 1.
SKF - 6210-ZJEM - Deep Groove Ball Bearing 50 mm x 90 mm x 20 mm (NEW in BOX) - PN: 6210 ZJEM. Radial/Deep Groove Ball Bearing - Round Bore, 50 mm ID, 90 mm OD, 20 mm Width, Single Shielded, C3 Internal Clearance. Deep Groove Ball Bearing. Single Row Deep Groove Ball Bearing, steel cage, C3 fit, 1 shield, Electic Motor Quality.
SKF - 6207-2RSJEM - Deep Groove Ball Bearing 35 mm x 72 mm x 17 mm (NEW in BOX) - 6207 2RSJEM. Radial/Deep Groove Ball Bearing - Round Bore, 35 mm ID, 72 mm OD, 17 mm Width, Double Sealed, C3 Internal Clearance. Deep Groove Ball Bearing. Single Row Deep Groove Ball Bearing, steel cage, C3 fit, 2 seals, Electric Motor Quality.
SKF - 6012 2RSJEM - Deep Groove Ball Bearing 60 mm x 95 mm x 18 mm (NEW in BOX) - PN: 6012 2RSJEM. 6012 2RSJEM. Radial/Deep Groove Ball Bearing - Round Bore, 60 mm ID, 95 mm OD, 18 mm Width, Double Sealed, C3 Internal Clearance. Deep Groove Ball Bearing. Single Row Deep Groove Ball Bearing, steel cage, C3 fit, 2 seals, Electric Motor Quality.
INA ZKLN0624-2RS Ball Thrust Bearing - 1 Piece - NEW - New, Quantity listing with reference photo. You may not receive the actual unit pictured, however each unit is in the same condition and will come as pictured.
ZKL 51307 68mm OD x 35mm ID Thrust Bearing - MPN: 51307. Prefer to pick it up yourself?. Box is worn from age. To get a freight quote we will need to know the following We choose the carrier. Warehouse Location: S3434. Condition: New/Other. LOCAL PICK-UP.
FAG 51 52407 80mm x 35mm Thrust Ball Bearing 34mm Thick - MPN: 51 52407. Prefer to pick it up yourself?. To get a freight quote we will need to know the following We choose the carrier. Warehouse Location: S3434. Condition: New/Other. LOCAL PICK-UP.
51201 Miniature Thrust Ball Bearing 12x28x11mm Chrome Steel with Washer 5Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F4-10M Miniature Thrust Ball Bearing 4x10x4mm Chrome Steel with Washer 2Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
S51201 Thrust Ball Bearing 12x28x11mm Stainless Steel with Washers - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51201Material: 420 Stainless SteelInner Diameter: 12mmOuter Diameter: 28mmThickness: 11mmDynamic Load Rating (Cr): 13.2kNStatic Load Rating (Cor): 19kNLimiting Speed (Grease): 5400rpmLimiting Speed (Oil): 8300rpmPackage Content:1 x Miniature Thrust Ball Bearing.
S51100 Thrust Ball Bearing 10x24x9mm Stainless Steel with Washers 2pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51100Material: 420 Stainless SteelInner Diameter: 10mmOuter Diameter: 24mmThickness: 9mmDynamic Load Rating (Cr): 10000NStatic Load Rating (Cor): 14000NLimiting Speed (Grease): 6500rpmLimiting Speed (Oil): 10000rpmPackage Content:2 x Miniature Thrust Ball Bearings.
S51101 Thrust Ball Bearing 12x26x9mm Stainless Steel with Washers 2pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51101Material: 420 Stainless SteelInner Diameter: 12mmOuter Diameter: 26mmThickness: 9mmDynamic Load Rating (Cr): 10.3kNStatic Load Rating (Cor): 15.4kNLimiting Speed (Grease): 6500rpmLimiting Speed (Oil): 10000rpmPackage Content:2 x Miniature Thrust Ball Bearings.
S51105 Thrust Ball Bearing 25x42x11mm Stainless Steel with Washers 2pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51105Material: 420 Stainless SteelInner Diameter: 25mmOuter Diameter: 42mmThickness: 11mmDynamic Load Rating (Cr): 19.5kNStatic Load Rating (Cor): 37.2NLimiting Speed (Grease): 4400rpmLimiting Speed (Oil): 6800rpmPackage Content:2 x Miniature Thrust Ball Bearings.
F5-10M Miniature Thrust Ball Bearings 5x10x4mm Chrome Steel with Washers 1 Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F12-21M Miniature Thrust Ball Bearings 12x21x5mm Chrome Steel with Washers 1 Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
SKF - 6216 NRJEM - Radial/DEEP GROOVE Ball Bearing - 80mm x 140mm x 26mm - (NEW) - Part #: 6216 NRJEM. Radial / Deep Groove Ball Bearing. Radial/Deep Groove Ball Bearing - Round Bore, 80 mm ID, 140 mm OD, 26 mm Width, Open, C3 Internal Clearance. Single Row Deep Groove Ball Bearing, open, steel cage, C3 fit, snap ring and grove, Electric Motor Quality.
51118 Miniature Thrust Ball Bearing 90x120x22mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F7-15M Miniature Thrust Ball Bearings 7x15x5mm Chrome Steel 4pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F7-15MShaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 7mmOuter Diameter (D): 15mmThickness (B): 5mmDynamic Load Rating (Cr): 2.2kNStatic Load Rating (Cor): 2.
S51103 Thrust Ball Bearing 17x30x9mm Stainless Steel with Washers - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51103Material: 420 Stainless SteelInner Diameter: 17mmOuter Diameter: 30mmThickness: 9mmDynamic Load Rating (Cr): 10.8NStatic Load Rating (Cor): 18.2NLimiting Speed (Grease): 6100rpmLimiting Speed (Oil): 9400rpmPackage Content:1 x Miniature Thrust Ball Bearing.
S51106 Thrust Ball Bearing 30x47x11mm Stainless Steel with Washers - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51106Material: 420 Stainless SteelInner Diameter: 30mmOuter Diameter: 47mmThickness: 11mmDynamic Load Rating (Cr): 20.4kNStatic Load Rating (Cor): 42.2kNLimiting Speed (Grease): 4300rpmLimiting Speed (Oil): 6600rpmPackage Content:1 x Miniature Thrust Ball Bearing.
F7-17M Miniature Thrust Ball Bearing 7x17x6mm Chrome Steel with Washer 2Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F2.5-6M Miniature Thrust Ball Bearings 2.5x6x3mm Chrome Steel 2pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F2.5-6MShaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 2.5mmOuter Diameter (D): 6mmThickness (B):3mmDynamic Load Rating (Cr): 0.1kNStatic Load Rating (Cor): 0.
51202 Miniature Thrust Ball Bearing 15x32x12mm Chrome Steel with Washer 4pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51204 Single Direction Thrust Ball Bearings Flat Seat Chromium,20x40x14mm 1pcs - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51120 Miniature Thrust Ball Bearing 100x135x25mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51201 Miniature Thrust Ball Bearing 12x28x11mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51113 Miniature Thrust Ball Bearing 65x90x18mm Chrome Steel with Washer 2pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51102 Miniature Thrust Ball Bearing 15x28x9mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51103 Miniature Thrust Ball Bearing 17x30x9mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51101 Miniature Thrust Ball Bearing 12x26x9mm Chrome Steel with Washer 4pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51117 Miniature Thrust Ball Bearing 85x110x19mm Chrome Steel with Washer 2pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F6-14M Miniature Thrust Ball Bearing 6x14x5mm Chrome Steel with Washer 2Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51202 Miniature Thrust Ball Bearing 15x32x12mm Chrome Steel with Washer 4pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
Kingsbury Face Mounted Thrust Bearing - This bearing is a Babbitt style thrust bearing. May have old oil in oil well. is not a clearing house. Unknown how many shoes it has.
F8-19M Miniature Thrust Ball Bearing 8x19x7mm Chrome Steel with Washer 5Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51118 Miniature Thrust Ball Bearing 90x120x22mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F7-17M Miniature Thrust Ball Bearing 7x17x6mm Chrome Steel with Washer 2Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51103 Miniature Thrust Ball Bearing 17x30x9mm Chrome Steel with Washer 4Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51120 Miniature Thrust Ball Bearing 100x135x25mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F2-6M Miniature Thrust Ball Bearing 2x6x3mm Chrome Steel with Washer 5Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51201 Miniature Thrust Ball Bearing 12x28x11mm Chrome Steel with Washer 5Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F12-21M Miniature Thrust Ball Bearings 12x21x5mm Chrome Steel 4pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F12-21MShaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 12mmOuter Diameter (D): 21mmThickness (B): 5mmDynamic Load Rating (Cr): 2.1kNStatic Load Rating (Cor): 2.
F5-11M Miniature Thrust Ball Bearing 5x11x4.5mm Chrome Steel with Washer 10Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F5-11MShaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15)Cage Material: Stamping SteelInner Diameter (d): 5mmOutside Diameter (OD): 11mmThickness (B): 4.
F8-19M Miniature Thrust Ball Bearing 8x19x7mm Chrome Steel with Washer 10Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51115 Miniature Thrust Ball Bearing 75x100x19mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F6-12M Miniature Thrust Ball Bearing 6x12x4.5mm Chrome Steel with Washer 5Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F6-12MShaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15)Cage Material: Stamping SteelInner Diameter (d): 6mmOutside Diameter (OD): 12mmThickness (B): 4.
2pcs 51100 Single Direction Thrust Ball Bearings 10mm x 24mm x 9mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
Plane Thrust Ball Bearings Grooved Bearings Bore 10mm to 110mm No.51100 to 51322 - Bore 10 to 110 mm Plane Thrust Ball Bearings Grooved Bearings 51100 to 51322 New. 51100 (10x24x9 mm). 51322 (110x190x63 mm). Smooth moving, low friction, low noise,wear resistance, high precision, stable, corrosion resistance, high temperature resistance and long life.
3mm - 10mm Bore Miniature Plane Thrust Ball Bearings with Grooved F3-8 to F10-18 - Bore 3mm -10mm Plane Thrust Ball Bearings Miniature with Grooved F3-8 to F10-18. F7-17 (7 x 17 x 6 mm). F8-19 (8 x 19 x 7 mm). F9-17 (9 x 17 x 5 mm). Smooth moving, low friction, low noise,wear resistance, high precision, stable, corrosion resistance, high temperature resistance and long life.
51209 Thrust Bearing - 51209 These are 3 part bearings consisting of a shaft and housing washer then assembled with a caged ball bearing between the two. They support axial loads in one direction with the clearance provided in the bore of one of the raceways to ensure alignment. These bearings are used for many applications including: Agricultural, pumps and mining, Heavy engineering usage, Printing equipment, Steel rolling and transmissions. Dimension Bore:45 Dimension OD:73 Dimension Width:20.
51103 Thrust Bearing - 51103 These are 3 part bearings consisting of a shaft and housing washer then assembled with a caged ball bearing between the two. They support axial loads in one direction with the clearance provided in the bore of one of the raceways to ensure alignment. These bearings are used for many applications including: Agricultural, pumps and mining, Heavy engineering usage, Printing equipment, Steel rolling and transmissions. Dimension Bore:17 Dimension OD:30 Dimension Width:9.
51124 Thrust Bearing - 51124 These are 3 part bearings consisting of a shaft and housing washer then assembled with a caged ball bearing between the two. They support axial loads in one direction with the clearance provided in the bore of one of the raceways to ensure alignment. These bearings are used for many applications including: Agricultural, pumps and mining, Heavy engineering usage, Printing equipment, Steel rolling and transmissions. Dimension Bore:120 Dimension OD:155 Dimension Width:25.
1 set 51112 Full Ceramic plane thrust Bearing ZrO2 60 x 85 x 17 mm - Because of no magnetic, magnetic dust absorption, can reduce premature bearing flaking, big noise. Available in the demagnetization device. 51111 55 78 16. high temperature resistant: use the temperature at 100 degrees to 600 degrees between the generated due to the range of temperature expansion.
1 set 51111 Full Ceramic plane thrust Bearing ZrO2 55 x 78 x 16 mm - Because of no magnetic, magnetic dust absorption, can reduce premature bearing flaking, big noise. Available in the demagnetization device. high temperature resistant: use the temperature at 100 degrees to 600 degrees between the generated due to the range of temperature expansion.
1 set 51110 Full Ceramic plane thrust Bearing ZrO2 50 x 70 x 14 mm - Because of no magnetic, magnetic dust absorption, can reduce premature bearing flaking, big noise. Available in the demagnetization device. 51111 55 78 16. high temperature resistant: use the temperature at 100 degrees to 600 degrees between the generated due to the range of temperature expansion.
1 set 51109 Full Ceramic plane thrust Bearing ZrO2 45 x 65 x 14 mm - Because of no magnetic, magnetic dust absorption, can reduce premature bearing flaking, big noise. Available in the demagnetization device. 51111 55 78 16. 51113 65 90 18. high temperature resistant: use the temperature at 100 degrees to 600 degrees between the generated due to the range of temperature expansion.
1 set 51108 Full Ceramic plane thrust Bearing ZrO2 40 x 60 x 13 mm - Because of no magnetic, magnetic dust absorption, can reduce premature bearing flaking, big noise. Available in the demagnetization device. 51111 55 78 16. high temperature resistant: use the temperature at 100 degrees to 600 degrees between the generated due to the range of temperature expansion.
1 set 51107 Full Ceramic plane thrust Bearing ZrO2 35 x 52 x 12 mm - Because of no magnetic, magnetic dust absorption, can reduce premature bearing flaking, big noise. Available in the demagnetization device. 51111 55 78 16. high temperature resistant: use the temperature at 100 degrees to 600 degrees between the generated due to the range of temperature expansion.
1 set 51106 Full Ceramic plane thrust Bearing ZrO2 30 x 47 x 11 mm - Because of no magnetic, magnetic dust absorption, can reduce premature bearing flaking, big noise. Available in the demagnetization device. 51111 55 78 16. high temperature resistant: use the temperature at 100 degrees to 600 degrees between the generated due to the range of temperature expansion.
1 set 51105 Full Ceramic plane thrust Bearing ZrO2 25 x 42 x 11 mm - Because of no magnetic, magnetic dust absorption, can reduce premature bearing flaking, big noise. Available in the demagnetization device. 51111 55 78 16. high temperature resistant: use the temperature at 100 degrees to 600 degrees between the generated due to the range of temperature expansion.
1 set 51104 Full Ceramic plane thrust Bearing ZrO2 20 x 35 x 10 mm - Because of no magnetic, magnetic dust absorption, can reduce premature bearing flaking, big noise. Available in the demagnetization device. 51111 55 78 16. high temperature resistant: use the temperature at 100 degrees to 600 degrees between the generated due to the range of temperature expansion.
1 set 51103 Full Ceramic plane thrust Bearing ZrO2 17 x 30 x 9 mm - Because of no magnetic, magnetic dust absorption, can reduce premature bearing flaking, big noise. Available in the demagnetization device. 51111 55 78 16. high temperature resistant: use the temperature at 100 degrees to 600 degrees between the generated due to the range of temperature expansion.
1 set 51102 Full Ceramic plane thrust Bearing ZrO2 15 x 28 x 9 mm - Because of no magnetic, magnetic dust absorption, can reduce premature bearing flaking, big noise. Available in the demagnetization device. 51111 55 78 16. high temperature resistant: use the temperature at 100 degrees to 600 degrees between the generated due to the range of temperature expansion.
1 set 51101 Full Ceramic plane thrust Bearing ZrO2 12 x 26 x 9 mm - Because of no magnetic, magnetic dust absorption, can reduce premature bearing flaking, big noise. Available in the demagnetization device. 51111 55 78 16. high temperature resistant: use the temperature at 100 degrees to 600 degrees between the generated due to the range of temperature expansion.
1 set 51100 Full Ceramic plane thrust Bearing ZrO2 10 x 24 x 9 mm - Because of no magnetic, magnetic dust absorption, can reduce premature bearing flaking, big noise. Available in the demagnetization device. 51111 55 78 16. high temperature resistant: use the temperature at 100 degrees to 600 degrees between the generated due to the range of temperature expansion.
Timken A-7094-A Thrust Bearing "New" A7094A - For Sale is a new Timken A-7094-A thrust bearing. The box is aged and label is difficult to read but parts are in good condition.
51216 Thrust Bearing - 51216 These are 3 part bearings consisting of a shaft and housing washer then assembled with a caged ball bearing between the two. They support axial loads in one direction with the clearance provided in the bore of one of the raceways to ensure alignment. These bearings are used for many applications including: Agricultural, pumps and mining, Heavy engineering usage, Printing equipment, Steel rolling and transmissions. Dimension Bore:80 Dimension OD:115 Dimension Width:28.
Nachi 7311BMUC3 Thrust Bearing New Old Stock - 1 1/8” wide, 2 1/4” ID, and 4 13/16” OD. NO WARRANTY. WITH ALL FAULTS?. GOVERNING LAW. WARNING OF HAZARDS. Parts Washers. Material Handling / Crane.
Aetna Thrust Bearing F37 New - USED, but in good working condition. Removed from closed plant. NEW, in box. NEW, no box. NEW, old inventory. • Freight, etc. • Local pick up.
53217 Thrust Bearing - 53217 Single direction, with spherical housing locating washer, separable. Bearings of series 532 and 533 have a spherical housing locating washer. With an appropriate housing design and in conjunction with seating washers U2 and U3, they allow angular adjustment and can therefore compensate static misalignments between the shaft and housing. Dimension Bore:85 Dimension OD:125 Dimension Width:37.
10mm-90mm Miniature Thrust Ball Bearing with Washer Ball Bearings 51100 to 51218 - Planar thrust ball bearing is a kind of rolling bearing that bears axial load. Type:Miniature Thrust Ball Bearing. Using high-speed hot forging machine forging technology, the material utilization rate is increased by 18%, and a low-noise and long-life flat thrust ball bearing is manufactured.
51112 Thrust Bearing - 51112 These are 3 part bearings consisting of a shaft and housing washer then assembled with a caged ball bearing between the two. They support axial loads in one direction with the clearance provided in the bore of one of the raceways to ensure alignment. These bearings are used for many applications including: Agricultural, pumps and mining, Heavy engineering usage, Printing equipment, Steel rolling and transmissions. Dimension Bore:60 Dimension OD:85 Dimension Width:17.
4Pcs/ set Miniature Thrust Bearing F8-16M 8X 16 X 5mm Axial Metal Ball in US - High performance, low noise, long life, adopts hydrogen nitriding process, high tensile strength. High precision, fast speed, long life, uniformly load distributed, can withstand high thrust loads. 4 x Miniature Thrust ball bearings.
GEDORE 234205 Pressire piece, 4556870 - Part Number: 4556870. The Dowidat brothers, Otto, Karl, and Willi started Gedore in Remscheid, Germany in 1919. A vast majority of Gedore tools are made in Germany with their pliers being forged in Austria, and other tools being manufactured in Slovenia, Italy, and Poland.
S51100 Thrust Ball Bearing 10x24x9mm Stainless Steel with Washers - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51100Material: 420 Stainless SteelInner Diameter: 10mmOuter Diameter: 24mmThickness: 9mmDynamic Load Rating (Cr): 10000NStatic Load Rating (Cor): 14000NLimiting Speed (Grease): 6500rpmLimiting Speed (Oil): 10000rpmPackage Content:1 x Miniature Thrust Ball Bearing.
S51202 Thrust Ball Bearing 15x32x12mm Stainless Steel with Washers - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51202Material: 420 Stainless SteelInner Diameter: 15mmOuter Diameter: 32mmThickness: 12mmDynamic Load Rating (Cr): 6.6kNStatic Load Rating (Cor): 24.8kNLimiting Speed (Grease): 4900rpmLimiting Speed (Oil): 7500rpmPackage Content:1 x Miniature Thrust Ball Bearing.
S51108 Thrust Ball Bearing 40x60x13mm Stainless Steel with Washers - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51108Material: 420 Stainless SteelInner Diameter: 40mmOuter Diameter: 60mmThickness: 13mmDynamic Load Rating (Cr): 26.9kNStatic Load Rating (Cor): 62.8kNLimiting Speed (Grease): 3400rpmLimiting Speed (Oil): 5300rpmPackage Content:1 x Miniature Thrust Ball Bearing.
S51104 Thrust Ball Bearing 20x35x10mm Stainless Steel with Washers - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51104Material: 420 Stainless SteelInner Diameter: 20mmOuter Diameter: 35mmThickness: 10mmDynamic Load Rating (Cr): 14.2NStatic Load Rating (Cor): 24.7NLimiting Speed (Grease): 5100rpmLimiting Speed (Oil): 7900rpmPackage Content:1 x Miniature Thrust Ball Bearing.
S51203 Thrust Ball Bearing 17x35x12mm Stainless Steel with Washers - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51203Material: 420 Stainless SteelInner Diameter: 17mmOuter Diameter: 35mmThickness: 12mmDynamic Load Rating (Cr): 17.2kNStatic Load Rating (Cor): 27.3kNLimiting Speed (Grease): 4900rpmLimiting Speed (Oil): 7500rpmPackage Content:1 x Miniature Thrust Ball Bearing.
S51102 Thrust Ball Bearing 15x28x9mm Stainless Steel with Washers 2pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51102Material: 420 Stainless SteelInner Diameter: 15mmOuter Diameter: 28mmThickness: 9mmDynamic Load Rating (Cr): 10.5NStatic Load Rating (Cor): 16.8NLimiting Speed (Grease): 6100rpmLimiting Speed (Oil): 9400rpmPackage Content:2 x Miniature Thrust Ball Bearings.
S51105 Thrust Ball Bearing 25x42x11mm Stainless Steel with Washers - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51105Material: 420 Stainless SteelInner Diameter: 25mmOuter Diameter: 42mmThickness: 11mmDynamic Load Rating (Cr): 19.5kNStatic Load Rating (Cor): 37.2NLimiting Speed (Grease): 4400rpmLimiting Speed (Oil): 6800rpmPackage Content:1 x Miniature Thrust Ball Bearing.
S51102 Thrust Ball Bearing 15x28x9mm Stainless Steel with Washers - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51102Material: 420 Stainless SteelInner Diameter: 15mmOuter Diameter: 28mmThickness: 9mmDynamic Load Rating (Cr): 10.5NStatic Load Rating (Cor): 16.8NLimiting Speed (Grease): 6100rpmLimiting Speed (Oil): 9400rpmPackage Content:1 x Miniature Thrust Ball Bearing.
S51104 Thrust Ball Bearing 20x35x10mm Stainless Steel with Washers 2pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and maintenance inspections.Thrust Ball Bearings consist of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.420 Stainless Steel Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: S51104Material: 420 Stainless SteelInner Diameter: 20mmOuter Diameter: 35mmThickness: 10mmDynamic Load Rating (Cr): 14.2NStatic Load Rating (Cor): 24.7NLimiting Speed (Grease): 5100rpmLimiting Speed (Oil): 7900rpmPackage Content:2 x Miniature Thrust Ball Bearings.
INA 51108 Thrust Ball Bearing - Static Load Capacity. These bearings consist of three parts, a shaft and housing washer that have angular grooves in them and a caged ball bearing assembly that is sandwiched in between them. Fillet Radius.
51100 ~ 51310 Single Direction Thrust Axial Ball Bearings - They are mainly used in automotive industry and machine tool. Single direction thrust ball bearings consist of a shaft washer, a housing washer and a ball and cage thrust assembly, they can sustain axial loads in one direction and thus locate a shaft axially in one direction.
51207 Single Direction Thrust Ball Bearings 35mm x 62mm x 18mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51207 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 35 mm Outer Diameter (D): 62 mm Thickness (B): 18 mm Dynamic Load Rating (Cr): 39.
3pcs 51202 Single Direction Thrust Ball Bearings 15mm x 32mm x 12mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51202 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 15 mm Outer Diameter (D): 32 mm Thickness (B): 12 mm Dynamic Load Rating (Cr): 16.
10pcs F9-20M Miniature Thrust Ball Bearing Chrome Steel with Washer 9x20x7mm - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51109 Single Direction Thrust Ball Bearings 45mm x 65mm x 14mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51109 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 45 mm Outer Diameter (D): 65 mm Thickness (B): 14 mm Dynamic Load Rating (Cr): 27.
51209 Single Direction Thrust Ball Bearings 45mm x 73mm x 20mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51209 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 45 mm Outer Diameter (D): 73 mm Thickness (B): 20 mm Dynamic Load Rating (Cr): 47.
51211 Single Direction Thrust Ball Bearings 55mm x 90mm x 25mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51211 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 55 mm Outer Diameter (D): 90 mm Thickness (B): 25 mm Dynamic Load Rating (Cr): 69.
3pcs 51108 Single Direction Thrust Ball Bearings 40mm x 60mm x 13mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51108 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 40 mm Outer Diameter (D): 60 mm Thickness (B): 13 mm Dynamic Load Rating (Cr): 26.
51100 Single Direction Thrust Ball Bearings 10mm x 24mm x 9mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51206 Single Direction Thrust Ball Bearings 30mm x 52mm x 16mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51206 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 30 mm Outer Diameter (D): 52 mm Thickness (B): 16 mm Dynamic Load Rating (Cr): 29.
51202 Single Direction Thrust Ball Bearings 15mm x 32mm x 12mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51202 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 15 mm Outer Diameter (D): 32 mm Thickness (B): 12 mm Dynamic Load Rating (Cr): 16.
2pcs 51205 Single Direction Thrust Ball Bearings Chrome Steel 25mm x 47mm x 15mm - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: 51205Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 25 mmOuter Diameter (D): 47 mmThickness (B): 15 mmDynamic Load Rating (Cr): 27.
51306 Single Direction Thrust Ball Bearings 30mm x 60mm x 21mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51306 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 30 mm Outer Diameter (D): 60 mm Thickness (B): 21 mm Dynamic Load Rating (Cr): 42.
51304 Single Direction Thrust Ball Bearings 20mm x 47mm x 18mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
2pcs 51206 Single Direction Thrust Ball Bearings 30mm x 52mm x 16mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51206 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 30 mm Outer Diameter (D): 52 mm Thickness (B): 16 mm Dynamic Load Rating (Cr): 29.
51116 Single Direction Thrust Ball Bearings 80mm x 105mm x 19mm Chrome Steel - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification:Model: 51116Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 80 mmOuter Diameter (D): 105 mmThickness (B): 19 mmDynamic Load Rating (Cr): 44.
51114 Single Direction Thrust Ball Bearings 70mm x 95mm x 18mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
2pcs 51105 Single Direction Thrust Ball Bearings 25mm x 42mm x 11mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51105 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 25 mm Outer Diameter (D): 42 mm Thickness (B): 11 mm Dynamic Load Rating (Cr): 19.
5pcs 51100 Single Direction Thrust Ball Bearings Chrome Steel ABEC3 Single Row - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51208 Single Direction Thrust Ball Bearings 40mm x 68mm x 19mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51208 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 40 mm Outer Diameter (D): 68 mm Thickness (B): 19 mm Dynamic Load Rating (Cr): 46.
2pcs 51110 Single Direction Thrust Ball Bearings 50mm x 70mm x 14mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51110 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 50 mm Outer Diameter (D): 70 mm Thickness (B): 14 mm Dynamic Load Rating (Cr): 28.
51200 Single Direction Thrust Ball Bearings 10mm x 26mm x 11mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51200 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 10 mm Outer Diameter (D): 26 mm Thickness (B): 11 mm Dynamic Load Rating (Cr): 12.
51104 Single Direction Thrust Ball Bearings 20mm x 35mm x 10mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51104 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 20 mm Outer Diameter (D): 35 mm Thickness (B): 10 mm Dynamic Load Rating (Cr): 14.
3pcs 51201 Single Direction Thrust Ball Bearings 12mm x 28mm x 11mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51201 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 12 mm Outer Diameter (D): 28 mm Thickness (B): 11 mm Dynamic Load Rating (Cr): 13.
51113 Single Direction Thrust Ball Bearings 65mm x 90mm x 18mm Chrome Steel - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: 51113Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 65 mmOuter Diameter (D): 90 mmThickness (B): 18 mmDynamic Load Rating (Cr): 41.
51101 Single Direction Thrust Ball Bearings 12mm x 26mm x 9mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51101 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 12 mm Outer Diameter (D): 26 mm Thickness (B): 9 mm Dynamic Load Rating (Cr): 10.
51111 Single Direction Thrust Ball Bearings 55mm x 78mm x 16mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51111 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 55 mm Outer Diameter (D): 78 mm Thickness (B): 16 mm Dynamic Load Rating (Cr): 34.
2pcs 51106 Single Direction Thrust Ball Bearings Chrome Steel 30mm x 47mm x 11mm - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: 51106Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 30 mmOuter Diameter (D): 47 mmThickness (B): 11 mmDynamic Load Rating (Cr): 20.
3pcs 51100 Single Direction Thrust Ball Bearings 10mm x 24mm x 9mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51105 Single Direction Thrust Ball Bearings Chrome Steel 25mm x 42mm x 11mm - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: 51105Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Material: Chromium Steel (GCr15)Cage Material: Stamping SteelBore Diameter (d): 25 mmOuter Diameter (D): 42 mmThickness (B): 11 mmDynamic Load Rating (Cr): 19.
51305 Single Direction Thrust Ball Bearings 25mm x 52mm x 18mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51305 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 25 mm Outer Diameter (D): 52 mm Thickness (B): 18 mm Dynamic Load Rating (Cr): 35.
2pcs 51203 Single Direction Thrust Ball Bearings 17mm x 35mm x 12mm Chrome Steel - Description: Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series. The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections. Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly. They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load. Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance. Specification: Model: 51203 Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15) Cage Material: Stamping Steel Bore Diameter (d): 17 mm Outer Diameter (D): 35 mm Thickness (B): 12 mm Dynamic Load Rating (Cr): 17.
51100 Miniature Thrust Ball Bearing 10x24x9mm Chrome Steel with Washer 10Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
53208 Thrust Bearing - 53208 Single direction, with spherical housing locating washer, separable. Bearings of series 532 and 533 have a spherical housing locating washer. With an appropriate housing design and in conjunction with seating washers U2 and U3, they allow angular adjustment and can therefore compensate static misalignments between the shaft and housing. Dimension Bore:40 Dimension OD:68 Dimension Width:23.
51105 Single Direction Thrust Ball Bearings Flat Seat Chromium,25x42x11mm 3pcs - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F5-12M Miniature Thrust Ball Bearings 5x12x4mm Chrome Steel with Washers 1 Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F4-9M Miniature Thrust Ball Bearings 4x9x4mm Chrome Steel with Washers 1 Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F6-14 Miniature Thrust Ball Bearings 6x14x4.5mm Chrome Steel with Washers 1 Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F6-14Shaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15)Cage Material: Stamping SteelInner Diameter (d): 6mmOutside Diameter (OD): 14mmThickness (B): 5mmDynamic Load Rating (Cr): 1.6kNStatic Load Rating (Cor): 1.
F6-14M Miniature Thrust Ball Bearing 6x14x5mm Chrome Steel with Washer 2Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F2-6M Miniature Thrust Ball Bearing 2x6x3mm Chrome Steel with Washer 5Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F6-14M Miniature Thrust Ball Bearing 6x14x5mm Chrome Steel with Washer 10Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51200 Miniature Thrust Ball Bearing 10x26x11mm Chrome Steel with Washer 2Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F7-17M Miniature Thrust Ball Bearing 7x17x6mm Chrome Steel with Washer 4Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F8-19M Miniature Thrust Ball Bearing 8x19x7mm Chrome Steel with Washer 5Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F6-12M Miniature Thrust Ball Bearing 6x12x4.5mm Chrome Steel with Washer 5Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F6-12MShaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15)Cage Material: Stamping SteelInner Diameter (d): 6mmOutside Diameter (OD): 12mmThickness (B): 4.
F10-18M Miniature Thrust Ball Bearing 10x18x5.5mm Chrome Steel with Washer 2Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F10-18MShaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15)Cage Material: Stamping SteelInner Diameter (d): 10mmOutside Diameter (OD): 18mmThickness (B): 5.
51308 Single Direction Thrust Ball Bearings Flat Seat Chromium,40x78x26mm 1pcs - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51204 Single Direction Thrust Ball Bearings Flat Seat Chromium,22x40x14mm 3pcs - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F8-19M Miniature Thrust Ball Bearings 8x19x7.2mm Chrome Steel with Washers 1 Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F8-19MShaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15)Cage Material: Stamping SteelInner Diameter (d): 8mmOutside Diameter (OD): 19mmThickness (B): 7.2mmDynamic Load Rating (Cr): 1.6kNStatic Load Rating (Cor): 1.
51102 Single Direction Thrust Ball Bearings Flat Seat Chromium,15x28x9mm 3pcs - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F5-10M Miniature Thrust Ball Bearings 5x10x4mm Chrome Steel with Washers 2 Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51110 Single Direction Thrust Ball Bearings Flat Seat Chromium 50x70x14mm - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51203 Single Direction Thrust Ball Bearings Flat Seat Chromium,17x35x12mm 1pcs - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
2pcs F9-20M Miniature Thrust Ball Bearing Chrome Steel with Washer 9x20x7mm - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51104 Single Direction Thrust Ball Bearings Flat Seat Chromium,20x35x10mm 1pcs - Description:Uxcell provide P5 Tolerance Single Direction Thrust Ball Bearings of all series.The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F8-16M Miniature Thrust Ball Bearings 8x16x5mm Chrome Steel with Washers 1 Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F8-16MShaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15)Cage Material: Stamping SteelInner Diameter (d): 8mmOutside Diameter (OD): 16mmThickness (B): 5mmDynamic Load Rating (Cr): 1.6kNStatic Load Rating (Cor): 1.
51117 Miniature Thrust Ball Bearing 85x110x19mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51105 Miniature Thrust Ball Bearing 25x42x11mm Chrome Steel with Washer 4pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51204 Miniature Thrust Ball Bearing 20x40x14mm Chrome Steel with Washer 2pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51100 Miniature Thrust Ball Bearing 10x24x9mm Chrome Steel with Washer 4pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51120 Miniature Thrust Ball Bearing P0 100x135x25mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51201 Miniature Thrust Ball Bearing 12x28x11mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51103 Miniature Thrust Ball Bearing 17x30x9mm Chrome Steel with Washer 10pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51102 Miniature Thrust Ball Bearing 15x28x9mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51118 Miniature Thrust Ball Bearing P0 90x120x22mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51115 Miniature Thrust Ball Bearing 75x100x19mm Chrome Steel with Washer 2pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51200 Miniature Thrust Ball Bearing 10x26x11mm Chrome Steel with Washer 10pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51117 Miniature Thrust Ball Bearing 85x110x19mm Chrome Steel with Washer 2pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51113 Miniature Thrust Ball Bearing 65x90x18mm Chrome Steel with Washer 2pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51105 Miniature Thrust Ball Bearing 25x42x11mm Chrome Steel with Washer 10pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51103 Miniature Thrust Ball Bearing 17x30x9mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51201 Miniature Thrust Ball Bearing 12x28x11mm Chrome Steel with Washer 2pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51102 Miniature Thrust Ball Bearing 15x28x9mm Chrome Steel with Washer 4pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F4-9M Miniature Thrust Ball Bearings 4x9x4mm Chrome Steel with Washers 2 Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
F5-11M Miniature Thrust Ball Bearing 5x11x4.5mm Chrome Steel with Washer 2Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.Specification:Model: F5-11MShaft/Housing Washer Material: Chromium Steel (GCr15) Bearing Ball Meterial: Chromium Steel (GCr15)Cage Material: Stamping SteelInner Diameter (d): 5mmOutside Diameter (OD): 11mmThickness (B): 4.
2pcs F8-22M Miniature Thrust Ball Bearing Chrome Steel with Washer 8x22x7mm - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
Ina Tc2840/0-5-Hla Needle Thrust Bearing,Bore 1.750 In - Zoro Select Z5425 Arch Barrel, 5/16"-18, 2 1/16 In Brl Lg, 1/2 In Brl Dia, 18-8. Zoro Select 24C373 One Hole Lug Compress Connector,4/0 Awg. Zoro Select E-15Ss External-E E-Clip, Stainless Steel, Plain Finish, 5/32 In.
Ina Axk2035 Needle Thrust Roller Bearing,Bore 20Mm - & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial. Zoro Select U01060.075.0450 Grade 5, 3/4"-16 Hex Head Cap Screw, Black Oxide.
Ina Tc1625/0-5-Hla Needle Thrust Bearing,Bore 1 In - Dia.,Tialn,2Fl. Olfa A1160b Snap Art Blade,Pk10. Zoro Select N04160.050.0750 Grade 8, 1/2"-20 Hex Head Cap Screw, Black Oxide. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes.
Ina D4 Banded Ball Thrust Bearing,Bore .688 In - Dia.,Tialn,2Fl. Olfa A1160b Snap Art Blade,Pk10. Zoro Select N04160.050.0750 Grade 8, 1/2"-20 Hex Head Cap Screw, Black Oxide. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes.
Ina Tc4052/0-5-Hla Needle Thrust Bearing,Bore 2.500 In - Zoro Select M04132.080.0025 Class 10.9, M8-1.25 Flange Bolt, Plain Steel, 22 Mm. Zoro Select U55000.050.0450 1/2"-13 Hex Head Cap Screw, Plain 316 Stainless. & Recepticles. Electrical Outlets. Light Industrial.
Ina Axk1528 Needle Thrust Roller Bearing,Bore 15Mm - Zoro Select M04132.080.0025 Class 10.9, M8-1.25 Flange Bolt, Plain Steel, 22 Mm. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
Ina Akl.D3 Banded Ball Thrust Bearing,Bore .625 In - Railhead Gear Ke-Fl1087 Penlight,Aluminum,150 Lm. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
Ina Tc3244/0-5-Hla Needle Thrust Bearing,Bore 2 In - Zoro Select U34181.012.0043 Blind Rivet, Large Flanged Head, 1/8 In Dia., 0.337. Lyle U1-1051-Ra_10X7 Safety Sign,10X7 In.,English. Zoro Select M51250.160.0070 Set Screw,M16 X 2Mm,70Mm L,Pk10. & Recepticles.
Ina Tc613/0-5-Hla Needle Thrust Bearing,Bore.375 In - Dia.,Tialn,2Fl. Ge Thhql2130 Miniature Circuit Breaker, 30 A, 120/240V Ac, 2 Pole, Plug In. Olfa A1160b Snap Art Blade,Pk10. Zoro Select N04160.050.0750 Grade 8, 1/2"-20 Hex Head Cap Screw, Black Oxide.
Ina Axk3047-A/0-10 Needle Thrust Roller Bearing,Bore 30Mm - Zoro Select 5Cnh9 Reclosable Poly Bag Zipper Seal 3" X 2-1/2", 4 Mil, Clear. Lyle U1-1001-Rd_10X14 Admittance Sign,14X10 In.,English. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures.
Andrews MPB Thrust Bearing FT016 Lot of 2 New - Andrews MPB Thrust Bearing. NEW, in box. NEW, no box. NEW, old inventory. If your item is received in a different condition than stated (DOA, not working properly etc. • Freight, etc. • Local pick up. ).
51208 Thrust Bearing - 51208 These are 3 part bearings consisting of a shaft and housing washer then assembled with a caged ball bearing between the two. They support axial loads in one direction with the clearance provided in the bore of one of the raceways to ensure alignment. These bearings are used for many applications including: Agricultural, pumps and mining, Heavy engineering usage, Printing equipment, Steel rolling and transmissions. Dimension Bore:40 Dimension OD:68 Dimension Width:19.
Fag Thrust Ball Bearing Nnb - SHELF 51-2533(6) . The photos that are provided are a representation, of the item. The color of the photo may vary from the actual product due to translation and reproduction limitations of photography.
51109 Thrust Bearing - 51109 These are 3 part bearings consisting of a shaft and housing washer then assembled with a caged ball bearing between the two. They support axial loads in one direction with the clearance provided in the bore of one of the raceways to ensure alignment. These bearings are used for many applications including: Agricultural, pumps and mining, Heavy engineering usage, Printing equipment, Steel rolling and transmissions. Dimension Bore:45 Dimension OD:65 Dimension Width:14.
51126 Thrust Bearing - 51126 These are 3 part bearings consisting of a shaft and housing washer then assembled with a caged ball bearing between the two. They support axial loads in one direction with the clearance provided in the bore of one of the raceways to ensure alignment. These bearings are used for many applications including: Agricultural, pumps and mining, Heavy engineering usage, Printing equipment, Steel rolling and transmissions. Dimension Bore:130 Dimension OD:170 Dimension Width:30.
53216 Thrust Bearing - 53216 Single direction, with spherical housing locating washer, separable. Bearings of series 532 and 533 have a spherical housing locating washer. With an appropriate housing design and in conjunction with seating washers U2 and U3, they allow angular adjustment and can therefore compensate static misalignments between the shaft and housing. Dimension Bore:80 Dimension OD:115 Dimension Width:33.
51107 Thrust Bearing - 51107 These are 3 part bearings consisting of a shaft and housing washer then assembled with a caged ball bearing between the two. They support axial loads in one direction with the clearance provided in the bore of one of the raceways to ensure alignment. These bearings are used for many applications including: Agricultural, pumps and mining, Heavy engineering usage, Printing equipment, Steel rolling and transmissions. Dimension Bore:35 Dimension OD:52 Dimension Width:12.
F175-2 Kilian New Unground Ball Bearing torrington co. - F175-2 Kilian New Unground Ball Bearing. By the torrington company . Condition is "New". Shipped FREE . As all my listings and with free shipping all salrs are final i offer no warranty , no returns, no Exceptions !. Any qiestions please ask . Quantity pricing available upon request.
Nice 400-33 Unground Radial Ball Bearing - Unground Radial Ball Bearing - Round Bore, 0.6250 in ID, 1.5000 in OD, 0.5000 in Width, Double Sealed, C0 Internal Clearance. Bearing Material 52100 Bearing Quality Steel. Dynamic Load Capacity 400 lbf.
SKF 51405 Thrust Ball Bearing - You are purchasing one, at random, from quantity in inventory > SKF 51405 Thrust Ball Bearing. New/old stock, box has shelf wear. Shipped with USPS Priority Mail. CN. MR-0000-4039
INA Thrust Bearing GT12 - New Open Box INA Thrust Bearing. Part Number GT12. (LL-B-Box 108).
Plane Thrust Ball Bearings Grooved Bearings Bore 10mm to 110mm No.51100 to 51322 - Bore 10 to 110 mm Plane Thrust Ball Bearings Grooved Bearings 51100 to 51322 New. 51100 (10x24x9 mm). 51322 (110x190x63 mm). Smooth moving, low friction, low noise,wear resistance, high precision, stable, corrosion resistance, high temperature resistance and long life.
3mm - 10mm Bore Miniature Plane Thrust Ball Bearings with Grooved F3-8 to F10-18 - Bore 3mm -10mm Plane Thrust Ball Bearings Miniature with Grooved F3-8 to F10-18. F7-17 (7 x 17 x 6 mm). F8-19 (8 x 19 x 7 mm). F9-17 (9 x 17 x 5 mm). Smooth moving, low friction, low noise,wear resistance, high precision, stable, corrosion resistance, high temperature resistance and long life.
Fafnir - Super Precision - 2Mmf9110Pmm9110Pe9666 - (New In Box) - PN: 2MMF9110PMM9110PE9666. Precision Ball Bearing. Baltimore and surrounding areas since 1996. But with our eyes now open we put a lot of effort in bringing you high end industrial and electrical parts as well.
FAFNIR - 9310K-CR Precision Deep Groove Single Row Bearing 72 x 50 x 12mm (NEW) - (Manufacturer Part Number (MPN): 9310K. Item Number: 9310K-CR Fafnir. Cage Type: CR - Composite Cage. Precision: Standard Precision. It does not have the original manufactures box. ). Heat Stabilization: No Heat Stabilization - Temperatures up to 120°C.
FAFNIR - SUPER PRECISION - MM9310WI-2 - Duplex Angular Contact Bearing - (Duplex Type Face to Face. Precision Ball Bearing. What looks like rust is just grease on bearing and bag. The bearing is new, sealed and unused and ready to install. ). However, the bearing is sealed in the manufactures plastic bag.
Ina Axk3552 Needle Thrust Roller Bearing,Bore 35Mm - Power First 52Ny42 Surge Protector Outlet Strip,White. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
Ina Tc1220/0-5-Hla Needle Thrust Bearing,Bore.750 In - Honeywell 26-0913B/10Xl Cut-Resistant Gloves,Xl,13 Gauge,A6,Pr. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
Andrews 904 Ball Thrust Bearing D81 - You are purchasing one, at random, from quantity in inventory > Andrews 904 Ball Thrust Bearing D81. New/old stock, box has shelf wear. Shipped with FedEx Standard Overnight. CN. PH-0200-1008
Andrews W1 Ball Thrust Bearing E81 - You are purchasing one, at random, from quantity in inventory > Andrews W1 Ball Thrust Bearing E81. New/old stock, box has shelf wear. Shipped with FedEx Standard Overnight. CN. PH-0200-1006
STEYR 51309 Ball Thrust Bearing 52/51309 - You are purchasing one, at random, from quantity in inventory > STEYR 51309 Ball Thrust Bearing 52/51309. New/old stock, no box. Shipped with FedEx Standard Overnight. CN. PH-0000-3769
FAG 51405 Ball Thrust Bearing A TK - You are purchasing one, at random, from quantity in inventory > FAG 51405 Ball Thrust Bearing A TK. New/old stock, box has shelf wear. Shipped with FedEx Standard Overnight. CN. PH-0000-3768
FAFNIR - 7212W SU Thrust Bearing, 60 x 110 x 22mm, 212K (NEW, Old Stock) - (PN: 7212W SU. Thrust Bearing. 110mm x 60mm x 22mm. The box is in good shape with a little fading and wear on the outside from storage. The bearing is new, wrapped protective paper with the original mounting instructions. ).
Ina Akl.D15 Banded Ball Thrust Bearing,Bore 1.375 In - Miles Lubricants Msf1434007 16 Oz Gear Oil Bottle 150 Iso Viscosity, 90W Sae. Miles Lubricants Msf1302007 16 Oz Gear Oil Bottle 46 Iso Viscosity, Slight. & Recepticles. Electrical Outlets. Light Industrial.
51102 Miniature Thrust Ball Bearing 15x28x9mm Chrome Steel with Washer 4pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51101 Miniature Thrust Ball Bearing 12x26x9mm Chrome Steel with Washer 10pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51101 Miniature Thrust Ball Bearing 12x26x9mm Chrome Steel with Washer 10pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51100 Miniature Thrust Ball Bearing 10x24x9mm Chrome Steel with Washer 10Pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51104 Miniature Thrust Ball Bearing 20x35x10mm Chrome Steel with Washer 5pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51104 Miniature Thrust Ball Bearing 20x35x10mm Chrome Steel with Washer 5pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51105 Miniature Thrust Ball Bearing 25x42x11mm Chrome Steel with Washer 10pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51120 Miniature Thrust Ball Bearing P0 100x135x25mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51100 Miniature Thrust Ball Bearing 10x24x9mm Chrome Steel with Washer 4pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51201 Miniature Thrust Ball Bearing 12x28x11mm Chrome Steel with Washer 2pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51204 Miniature Thrust Ball Bearing 20x40x14mm Chrome Steel with Washer 2pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51118 Miniature Thrust Ball Bearing P0 90x120x22mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51200 Miniature Thrust Ball Bearing 10x26x11mm Chrome Steel with Washer 10pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51105 Miniature Thrust Ball Bearing 25x42x11mm Chrome Steel with Washer 4pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51101 Miniature Thrust Ball Bearing 12x26x9mm Chrome Steel with Washer 4pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51115 Miniature Thrust Ball Bearing 75x100x19mm Chrome Steel with Washer 2pcs - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
51117 Miniature Thrust Ball Bearing 85x110x19mm Chrome Steel with Washer - Description:The separable components of thrust ball bearings are interchangeable. This facilitates mounting and dismounting, and maintenance inspections.Thrust Ball Bearings are consisted of a shaft washer, a housing washer and a ball and cage assembly.They are designed to accommodate axial loads and locate a shaft axially, in one direction only, and must not be subjected to any radial load.Chromium Steel (GCr15) Shaft and Housing Washer provide high and uniform hardness, good wear resistance.
Thrust Bearing Shoe Ki-015387 B-1251 53-608 Plus Unbranded, Lot Of 13 - One has "53-608 R-1251" written on it. Another has "53-608 B-1251 KI-015387". The final one has " 53-608 B-1251 KI-015387". The thirteen are in slightly dirty condition. The thirteen do have visible scratches.
AXK2035 Thrust Needle Roller Bearing With Two Washers 20mm x 35mm x 2mm - Item: AXK2035 Bearing. 1 AXK2035 Thrust Needle Roller bearing. Type: Thrust Needle Roller Bearing. A=2mm B=35mm C=20mm D=4mm F=1mm. Thickness (with 2 AS washers) : 4mm. Material: Bearing Steel. We will try our best to save your problem ASAP.
Consolidated 234406 MS P/5 New Thrust Ball Bearing Size 30 x 55 x 32 mm NOS - CONSOLIDATED 234406 MS P/5 New Thrust Ball Bearing.30 x 55 x 32 mm 234406 M. We do not buy direct from the manufacturers or from authorized dealers. The serial numbers in the pictures are covered to prevent mischief by hackers or others that want to cause harm.
Hess-bright thrust ball bearing N.O.S. 908 - Up for your consideration is a N.O.S. Hess-Bright thrust bearing 2 15/32" X 1 19/32' X 21/32" There is surface rust however there is no rust on the bearing surfaces and what you see is old grease which is protecting the bearing surface and will need to be clean it also roll smoothly.