Weir Ash 19889 Suction Liner 2.5 X 2 373 - WEIR ASH 19889 SUCTION LINER 2.5 X 2 373. NEW OPEN BOX. Product as pictured. All product part numbers are as pictured. All specs as pictured.
Weir Ash 14852 Drive Pump Liner 2.5 X 2Src 373 - WEIR ASH-14852 DRIVE LINER 2.5 X 2SRC 373. NEW OPEN BOX. Product as pictured. All product part numbers are as pictured. All specs as pictured.
FLOWSERVE 21-175-06 Seal,Pump Shaft - FLOWSERVE 21-175-06. Seal,Pump Shaft. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
DAYTON 3ACF7 Shaft Seal, 5/8 In,Viton,Silicon Carbide - Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
GRAINGER APPROVED 2HZW9 Rod Wiper,Rod Dia. 1",Urethane,PK5 - GRAINGER APPROVED 2HZW9. Rod Wiper,Rod Dia. 1",Urethane,PK5. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZW9. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
DAYTON 12F732 Fuel Hose,1 In NPT - Fuel Hose,1 In NPT. Warning: This product can expose you to chemicals including Lead which is known to the State of California to cause Cancer,and Di-isodecyl phthalate (DIDP) which is known to the State of California to cause birth defects or other reproductive harm.
PALMETTO PACKING 5000W Packing Seal, 5/8 Sq In., 10 Ft - Range (F) -100 to 650, Max. Temp in Steam (F) 1200, Max. Can Use At Low Or Zero Leakoff. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZY7 Rod Wiper,Rod Dia. 1-3/8",Urethane,PK5 - GRAINGER APPROVED 2HZY7. Rod Wiper,Rod Dia. 1-3/8",Urethane,PK5. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZY7. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 4PKK2 PTFE Square Piston Ring Set,Dia. 2-1/2" - GRAINGER APPROVED 4PKK2. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKK2. Polytetrafluoroethylene (PTFE) square ring piston seals are used in double-acting cylinders.
208347 New-No Box; Flowtech 5160 Seal Assembly; Size: 56mm - 208347 New-No Box; Flowtech 5160 Seal Assembly; Size: 56mm; Cozzini Part Number: 07-FLO-5160A. Item is New; unused; no factory packaging. Austin Surplus SKU: 208347 Location: 174178-GRG-R20-P19-S04-H-0000947
GRAINGER APPROVED 4PKH2 Rod Seal Kit,For Rod Dia. 3/4" - GRAINGER APPROVED 4PKH2. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKH2. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
DAYTON 3ACE8 Shaft Seal, 5/8 In,Viton,Silicon Carbide - Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
GRAINGER APPROVED 109-861 Float Ball,Round,Plastic,5 In - GRAINGER APPROVED 109-861. Grainger Part #:3FXE8. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 4PKJ8 PTFE Square Piston Ring Set,Dia. 1-3/4" - GRAINGER APPROVED 4PKJ8. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKJ8. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 4PKH6 Piston Seal Kit,For Bore Dia. 2" - GRAINGER APPROVED 4PKH6. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKH6. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2JBA9 Piston Crown Seal,Bore Dia. 5-1/2" - GRAINGER APPROVED 2JBA9. Grainger reserves the right to accept or reject any order. Grainger Part #:2JBA9. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 4PKH5 Piston Seal Kit,For Bore Dia. 1-1/2" - GRAINGER APPROVED 4PKH5. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKH5. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZG4 Rod Seal,Rod Dia. 1-1/8",Urethane,PK2 - GRAINGER APPROVED 2HZG4. Rod Seal,Rod Dia. 1-1/8",Urethane,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZG4. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
189716 New In Box; John Crane B05595 Pump Seal Kit; 1"in - 189716 New In Box; John Crane B05595 Pump Seal Kit; 1"in; Comes With Washers. Item is New; unused; in factory packaging that may have been opened.. Austin Surplus SKU: 189716 Location: GRG-R09-P09-S02-0001537
Flowserve 001096.825.000 Seat Ring 2” 373 - FLOWSERVE 001096.825.000 SEAT RING 2” 373. NEW OPEN BOX. Product as pictured. All product part numbers are as pictured. All specs as pictured.
191286 New-No Box; Flowtrend 118106 Set-2 Right & Left Block Gasket; 5-3/4"Lx7"W - 191286 New-No Box; Flowtrend 118106 Set-2 Right & Left Block Gasket; 5-3/4"Lx7"W; Flowtrend Mfg. Replacement For: 214.Garlock 2950 Gasket Board. Item is New; unused; no factory packaging. Austin Surplus SKU: 191286 Location: GRG-R11-P13-S04-F-0001186
GRAINGER APPROVED 2JBA3 Piston Crown Seal,Bore Dia. 3-1/2" - GRAINGER APPROVED 2JBA3. Grainger reserves the right to accept or reject any order. Grainger Part #:2JBA3. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
SNYDER INDUSTRIES 5680000N97207 Storage Tank - SNYDER INDUSTRIES 5680000N97207. Storage Tank. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZK3 Rod Seal,Rod Dia. 3",Urethane - GRAINGER APPROVED 2HZK3. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZK3. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
NAUGATUCK GRT70S421A Float Ball,Round,SS,7 In - NAUGATUCK GRT70S421A. Tubed Float Ball, Stainless Steel, Tubed Connection, 7 in Float Dia., Float Weight 25.76 oz, Thread Size 1/4 in, Max. Liquid Temp. 225 Degrees F, For Use With Liquid Level. Float Ball,Round,SS,7 In.
GRAINGER APPROVED 2HZK4 Rod Seal,Rod Dia. 3-1/2",Urethane - GRAINGER APPROVED 2HZK4. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZK4. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 4PKK8 PTFE Square Piston Ring Set,Bore Dia. 4" - GRAINGER APPROVED 4PKK8. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKK8. Polytetrafluoroethylene (PTFE) square ring piston seals are used in double-acting cylinders.
Lot Of 2 Denison Hydraulics 033-70549 Gasket 6.0, New - Lot Of 2 Denison Hydraulics 033-70549 Gasket 6.0. New surplus in factory sealed packaging. The exterior of the factory packaging is dirty from storage. The gaskets are in new condition. What you see in the photos is what you will receive.
226188 New In Box; Berliss 59A555A Pump Shaft Seal Assembly; 3/4"ID - 226188 New In Box; Berliss 59A555A Pump Shaft Seal Assembly; 3/4"ID ; . Item is New; unused; in factory packaging that may have been opened.. Austin Surplus SKU: 226188 Location: GRG-R06-P02-S04-E-0002720
226944 New In Box; Pac-Seal PS-631 Buna Mechanical Pump Seal; SS 1/2" - 226944 New In Box; Pac-Seal PS-631 Buna Mechanical Pump Seal; SS 1/2"; 1/2" Shaft Diameter; 1" Seat OD; Head Type C; Seat Type 1; Buna Pump Seal. Item is New; unused; in factory packaging that may have been opened.. Austin Surplus SKU: 226944 Location: GRG-R15-P07-S04-E-0004009
226811 New-No Box; Hutchison Hayes 7411 Carbon Ring - 226811 New-No Box; Hutchison Hayes 7411 Carbon Ring; HHSI; Alfa Laval PN 523817-01. Item is New; unused; no factory packaging. Austin Surplus SKU: 226811 Location: GRG-R17-P14-S04-A-0001527
GRAINGER APPROVED 2HZZ1 Rod Wiper,Rod Dia. 2",Urethane,PK5 - GRAINGER APPROVED 2HZZ1. Rod Wiper,Rod Dia. 2",Urethane,PK5. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZZ1. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 4PKG6 V-Ring Seal,2.835" ID,Buna N - GRAINGER APPROVED 4PKG6. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKG6. V-Ring Seal,2.835" ID,Buna N. V-Ring Seal, Inside Dia. 2.835 in, Width 0.236 in, Height 0.433 in, Temp.
GRAINGER APPROVED 4PKG7 V-Ring Seal,3.189" ID,Buna N - GRAINGER APPROVED 4PKG7. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKG7. V-Ring Seal,3.189" ID,Buna N. V-Ring Seal, Inside Dia. 3.189 in, Width 0.236 in, Height 0.433 in, Temp.
GRAINGER APPROVED 4PKG8 V-Ring Seal,3.543" ID,Buna N - GRAINGER APPROVED 4PKG8. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKG8. V-Ring Seal,3.543" ID,Buna N. V-Ring Seal, Inside Dia. 3.543 in, Width 0.236 in, Height 0.433 in, Temp.
GRAINGER APPROVED 4PKF4 V-Ring Seal,0.551" ID,Buna N,PK2 - GRAINGER APPROVED 4PKF4. V-Ring Seal,0.551" ID,Buna N,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKF4. V-Ring Seal, Inside Dia. 0.551 in, Width 0.118 in, Height 0.217 in, Temp.
DAYTON 1MCZ8 Chemical Injector,3-4 GPM - 3/8 M, Inlet Port (In.). 3/8 M, Bypass Port (In.). -, Flow Range (GPM) 3 to 4, Max. 2.125 in, Width (In.). 1 in, Height (In.). 3 in, Max. Fluid Temp. Chemical Injector,3-4 GPM.
FLOWSERVE 21-062-152 Seal,Pump Shaft,5/8 In - FLOWSERVE 21-062-152. Seal,Pump Shaft,5/8 In. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
TACO 007-042RP Cartridge, For 4JB22, 4PC90 - TACO 007-042RP. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
GRAINGER APPROVED 4PKG9 Rod Seal Kit,For Rod Dia. 1/2" - GRAINGER APPROVED 4PKG9. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKG9. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
227318 New In Box; Rainsflo Sealing Systems DPD14450.5PTP Sealing Set; - 227318 New In Box; Rainsflo Sealing Systems DPD14450.5PTP Sealing Set; ; Size: 1 1/2" X 1/2"; For Dupps Pressor Tallow Pump; Dupps# 108780. Item is New; unused; in factory packaging that may have been opened.. Austin Surplus SKU: 227318 Location: GRG-R15-P10-S03-0003436
PALMETTO PACKING 1030AF Packing Seal, 7/16 Sq In., 10 Ft - Range (F) -400 to 600, Max. Temp in Steam (F) NR, Max. Shaft Speed (ft/min) 2,000 fpm, pH Range 3 to 11. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZH2 Rod Seal,Rod Dia. 1",Urethane,PK2 - GRAINGER APPROVED 2HZH2. Rod Seal,Rod Dia. 1",Urethane,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZH2. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2JAZ6 Piston Crown Seal,Bore Dia. 2",Urethane - GRAINGER APPROVED 2JAZ6. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAZ6. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
TACO 1400-009RP Flange Kit,For In-Line Circulating Pumps - TACO 1400-009RP. Diversion contrary to U.S. law is prohibited. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
SNYDER INDUSTRIES 1060000N95003 Storage Tank - SNYDER INDUSTRIES 1060000N95003. Storage Tank. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
DAYTON 1MDA1 Valve, Regulating, 2-3 GPM - Valve, Regulating, 2-3 GPM. Valve, Regulating, Flow Range 2-3 GPM, Max. Fluid Temp. 190 F, Body Material Brass, Wetted Materials Brass, Stainless Steel, Buna-N, Plastic, Steel, Inlet Port (In.). 1/2 F, Outlet Port (In.).
TACO 110-252F-1 Flange,1" FNPT,Cast Iron,2PK - Flange,1" FNPT,Cast Iron,2PK. TACO 110-252F-1. Diversion contrary to U.S. law is prohibited. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Order Acceptance.
NEW BB3004-1 864714-1 Valve Stem Plug 18'' OAL - Title: NEW BB3004-1 864714-1 Valve Stem Plug 18" OAL. MPN: 864714-1. Fast Dispatch Service. We're down to earth, easy to work with people.
FLOWSERVE 31-112-10 Seal,Pump Shaft - FLOWSERVE 31-112-10. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.
FLOWSERVE 21-075-99 Seal,Pump Shaft,3/4 In - FLOWSERVE 21-075-99. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.
FLOWSERVE 68-062-48 Seal,Pump Shaft,5/8 In - FLOWSERVE 68-062-48. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Install with the spring-loaded portion pressed into the pump housing and the mating ring rotating with the shaft.
FLOWSERVE 21-075-98 Seal,Pump Shaft,3/4 In - FLOWSERVE 21-075-98. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.
FLOWSERVE 16-062-11 Seal,Pump Shaft,5/8 In - FLOWSERVE 16-062-11. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Replaces US Seal Type A, Crane Type 6, and Sealol Type 6OL.
FLOWSERVE 21-125-04 Seal,Pump Shaft - FLOWSERVE 21-125-04. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.
FLOWSERVE 16-075-10 Seal,Pump Shaft,3/4 In - FLOWSERVE 16-075-10. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Replaces US Seal Type A, Crane Type 6, and Sealol Type 6OL.
FLOWSERVE 16-062-06 Seal,Pump Shaft,5/8 In - FLOWSERVE 16-062-06. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Replaces US Seal Type A, Crane Type 6, and Sealol Type 6OL.
GRAINGER APPROVED 2HZY6 Rod Wiper,Rod Dia. 1-1/4",Urethane,PK5 - GRAINGER APPROVED 2HZY6. Rod Wiper,Rod Dia. 1-1/4",Urethane,PK5. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZY6. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZX4 Rod Wiper,Rod Dia. 1-3/4",Urethane,PK5 - GRAINGER APPROVED 2HZX4. Rod Wiper,Rod Dia. 1-3/4",Urethane,PK5. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZX4. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZJ9 Rod Seal,Rod Dia. 1-3/4",Urethane - GRAINGER APPROVED 2HZJ9. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZJ9. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZF3 Rod Seal,Rod Dia. 3/4",Urethane,PK2 - GRAINGER APPROVED 2HZF3. Rod Seal,Rod Dia. 3/4",Urethane,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZF3. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
TACO 194-1540F-1 Flange,1 1/4" FNPT,Cast Iron - Flange,1 1/4" FNPT,Cast Iron. TACO 194-1540F-1. Diversion contrary to U.S. law is prohibited. Order Acceptance. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
FLOWSERVE 21-062-23 Seal,Pump Shaft,5/8 In - FLOWSERVE 21-062-23. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.
FLOWSERVE 21-087-04 Seal,Pump Shaft,7/8 In - FLOWSERVE 21-087-04. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.
NAUGATUCK GR25S4221A Float Ball,Round,SS,2-1/2 In - NAUGATUCK GR25S4221A. Float Ball, Stainless Steel, Internal Connection, 2 1/2 in Float Dia., Float Weight 2.7 oz, Thread Type Machine Thread, Thread Size 1/4 In.-20, Max. Liquid Temp. 225 Degrees F, For Use With Liquid Level.
FLOWSERVE 21-175-08 Seal,Pump Shaft - FLOWSERVE 21-175-08. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.
DAYTON 12F732 Fuel Hose,1 In NPT PK 4 - Fuel Hose,1 In NPT PK 4. Warning: This product can expose you to chemicals including Lead which is known to the State of California to cause Cancer,and Di-isodecyl phthalate (DIDP) which is known to the State of California to cause birth defects or other reproductive harm.
GRAINGER APPROVED 2HZX2 Rod Wiper,Rod Dia. 1-3/8",Urethane,PK5 - GRAINGER APPROVED 2HZX2. Rod Wiper,Rod Dia. 1-3/8",Urethane,PK5. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZX2. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
195538 New In Box; John Crane M03822 Pump Shaft Seal Kit - 195538 New In Box; John Crane M03822 Pump Shaft Seal Kit; . Item is New; unused; in factory packaging that may have been opened.. Austin Surplus SKU: 195538 Location: GRG-R13-P07-S04-B-0004000
196054 New In Box; Dayton 3ACD7 Impeller; Neoprene; 3-9/16" L - 196054 New In Box; Dayton 3ACD7 Impeller; Neoprene; 3-9/16" L; . Item is New; unused; in factory packaging that may have been opened.. Austin Surplus SKU: 196054 Location: 36045-GRG-R08-P16-S04-0005312
196055 New In Box; Dayton 3ACD6 Impeller; Neoprene; 3-13/16" L - 196055 New In Box; Dayton 3ACD6 Impeller; Neoprene; 3-13/16" L; . Item is New; unused; in factory packaging that may have been opened.. Austin Surplus SKU: 196055 Location: 36046-GRG-R08-P16-S04-0005579
196057 New In Box; Dayton 3ACE3 Impeller Neoprene; 2" L - 196057 New In Box; Dayton 3ACE3 Impeller Neoprene; 2" L; . Item is New; unused; in factory packaging that may have been opened.. Austin Surplus SKU: 196057 Location: 36049-GRG-R07-P09-S04-0003341
196056 New In Box; Dayton 3ACE4 Impeller Neoprene; 2-3/8" L - 196056 New In Box; Dayton 3ACE4 Impeller Neoprene; 2-3/8" L; . Item is New; unused; in factory packaging that may have been opened.. Austin Surplus SKU: 196056 Location: 36048-GRG-R07-P09-S04-0003508
SNYDER INDUSTRIES 1280000N95005 Storage Tank - SNYDER INDUSTRIES 1280000N95005. Storage Tank. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
DAYTON 4KHA2 Relief Valve, 40 GPM, 1 NPT x 3/4 NPT - Valve, Pressure Relief, Max. Fluid Temp. 180 F, Body Material Bronze, Wetted Materials SS, Inlet Port (In.). 1 (M)NPT, Outlet Port (In.). 3/4 (F)NPT, Max. Relief Valve, 40 GPM, 1 NPT x 3/4 NPT. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
DAYTON 4JMY8 Pump Shaft Seal Kit, Seal Type 21 - Pump Shaft Seal Kit, Seal Type 21. Diversion contrary to U.S. law is prohibited. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 4PKH4 Piston Seal Kit,For Bore Dia. 1" PK 10 - GRAINGER APPROVED 4PKH4. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKH4-10. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
196548 New-No Box; Industry-Std 2WY55 Gear Pump Seal Kit - 196548 New-No Box; Industry-Std 2WY55 Gear Pump Seal Kit ; Viton. Item is New; unused; no factory packaging. Austin Surplus SKU: 196548 Location: 39092-GRG-R03-P03-S03-0000677
Bell & Gossett - 186826 - SEAL KIT - 1-3/4 " Shaft - VSC, VSC&S - (NEW in BOX) - MPN: 186826. Bell & Gossett - 186826 - SEAL KIT - 1-3/4 " Shaft - VSC, VSC&S - (NEW in BOX). Bell & Gossett. Shaft Size: 1-3/4". Type: Seal Kit. Seal Body Material: Brass. And don't forget to add us to you favorites if you are on the watch for parts and tooling.
GRAINGER APPROVED 2JAX5 Piston T-Seal,Bore Dia. 2-3/4",Nitrile - GRAINGER APPROVED 2JAX5. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAX5. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZH9 Rod Seal,Rod Dia. 1-1/2",Urethane,PK2 - GRAINGER APPROVED 2HZH9. Rod Seal,Rod Dia. 1-1/2",Urethane,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZH9. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 4PKJ9 PTFE Square Piston Ring Set,Bore Dia. 2" - GRAINGER APPROVED 4PKJ9. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKJ9. Polytetrafluoroethylene (PTFE) square ring piston seals are used in double-acting cylinders.
GRAINGER APPROVED 4PKF1 V-Ring Seal,0.197" ID,Buna N,PK2 - GRAINGER APPROVED 4PKF1. V-Ring Seal,0.197" ID,Buna N,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKF1. V-Ring Seal, Inside Dia. 0.197 in, Width 0.079 in, Height 0.146 in, Temp.
GRAINGER APPROVED 2HZY8 Rod Wiper,Rod Dia. 1-1/2",Urethane,PK5 - GRAINGER APPROVED 2HZY8. Rod Wiper,Rod Dia. 1-1/2",Urethane,PK5. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZY8. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2JAX4 Piston T-Seal,Bore Dia. 2-1/2",Nitrile - GRAINGER APPROVED 2JAX4. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAX4. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2JAZ7 Piston Crown Seal,Bore Dia. 2-1/4" - GRAINGER APPROVED 2JAZ7. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAZ7. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
DAYTON 3ACF8 Shaft Seal,7/8 In, Buna, Carbon, Ceramic - Shaft Seal,7/8 In, Buna, Carbon, Ceramic. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
GRAINGER APPROVED 4PKG2 V-Ring Seal,1.929" ID,Buna N - GRAINGER APPROVED 4PKG2. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKG2. V-Ring Seal,1.929" ID,Buna N. V-Ring Seal, Inside Dia. 1.929 in, Width 0.197 in, Height 0.354 in, Temp.
GRAINGER APPROVED 4PKF7 V-Ring Seal,1.142" ID,Buna N,PK2 - GRAINGER APPROVED 4PKF7. V-Ring Seal,1.142" ID,Buna N,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKF7. V-Ring Seal, Inside Dia. 1.142 in, Width 0.157 in, Height 0.295 in, Temp.
GRAINGER APPROVED 4PKH3 Rod Seal Kit,For Rod Dia. 1" - GRAINGER APPROVED 4PKH3. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKH3. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 4PKF9 V-Ring Seal,1.575" ID,Buna N,PK2 - GRAINGER APPROVED 4PKF9. V-Ring Seal,1.575" ID,Buna N,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKF9. V-Ring Seal, Inside Dia. 1.575 in, Width 0.197 in, Height 0.354 in, Temp.
SNYDER INDUSTRIES 1000100N97203 Storage Tank - SNYDER INDUSTRIES 1000100N97203. Storage Tank. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
SNYDER INDUSTRIES 1000110N97207 Storage Tank - SNYDER INDUSTRIES 1000110N97207. Storage Tank. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
SNYDER INDUSTRIES 1170000N95003 Storage Tank - SNYDER INDUSTRIES 1170000N95003. Storage Tank. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
SNYDER INDUSTRIES 5680000N97206 Storage Tank - SNYDER INDUSTRIES 5680000N97206. Storage Tank. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZY1 Rod Wiper,Rod Dia. 5/8",Urethane,PK5 - GRAINGER APPROVED 2HZY1. Rod Wiper,Rod Dia. 5/8",Urethane,PK5. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZY1. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZW6 Rod Wiper,Rod Dia. 3/4",Urethane,PK5 - GRAINGER APPROVED 2HZW6. Rod Wiper,Rod Dia. 3/4",Urethane,PK5. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZW6. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 4PKK9 PTFE Square Piston Ring Set,Dia. 4-1/4" - GRAINGER APPROVED 4PKK9. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKK9. Polytetrafluoroethylene (PTFE) square ring piston seals are used in double-acting cylinders.
GRAINGER APPROVED 2HZY4 Rod Wiper,Rod Dia. 1",Urethane,PK5 - GRAINGER APPROVED 2HZY4. Rod Wiper,Rod Dia. 1",Urethane,PK5. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZY4. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZX8 Rod Wiper,Rod Dia. 3",Urethane,PK5 - GRAINGER APPROVED 2HZX8. Rod Wiper,Rod Dia. 3",Urethane,PK5. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZX8. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
PALMETTO PACKING 1030AF Packing Seal, 3/16 Sq In., 10 Ft - Range (F) -400 to 600, Max. Temp in Steam (F) NR, Max. Shaft Speed (ft/min) 2,000 fpm, pH Range 3 to 11. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
PALMETTO PACKING 1382 Packing Seal, 5/16 Sq In., 25 Ft - Range (F) -400 to 550, Max. Temp in Steam (F) NR, Max. Shaft Speed (ft/min) 3,800 fpm, pH Range 0 to 14. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
DAYTON 4KGZ8 Relief Valve, 6 GPM, 1/2 NPT x 1/2 NPT - Valve, Pressure Relief, Max. Fluid Temp. 180 F, Body Material Bronze, Wetted Materials SS, Inlet Port (In.). 1/2 (M)NPT, Outlet Port (In.). 1/2 (F)NPT, Max. Relief Valve, 6 GPM, 1/2 NPT x 1/2 NPT. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
DAYTON 1MDA5 Valve, Regulating,0-9 GPM - Valve, Regulating, Flow Range 0-9 GPM, Max. Fluid Temp. 190 F, Body Material Brass, Wetted Materials Brass, Stainless Steel, Buna-N, Plastic, Steel, Inlet Port (In.). 3/8 M, Outlet Port (In.). 3/8 M, Bypass Port (In.).
DAYTON 1MDA7 Valve, Safety,0-6 GPM - Valve, Safety,0-6 GPM. Fluid Temp. 200 F, Body Material Brass, Wetted Materials Brass, 400 Stainless Steel, Delrin, Inlet Port (In.). 3/8 M, Max. It must always be used with a pressure regulator or unloader.
GRAINGER APPROVED 2JAX2 Piston T-Seal,Bore Dia. 2",Nitrile - GRAINGER APPROVED 2JAX2. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAX2. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2JAX5 Piston T-Seal,Bore Dia. 2-3/4",Nitrile PK 6 - GRAINGER APPROVED 2JAX5. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAX5-6. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
PALMETTO PACKING 1347AF Packing Seal, 7/16 Sq In., 5 Ft - Range (F) -10 to 450, Max. Temp in Steam (F) NR, Max. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
GRAINGER APPROVED 2HZJ8 Rod Seal,Rod Dia. 1-1/2",Urethane - GRAINGER APPROVED 2HZJ8. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZJ8. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
U.s. Seal Ps-560 Mechanical Seal Shaft Od:.937 94118 - SCL #: 94118. Mfg: U.S. SEAL. 2015 Federal Regional Standards for Heating and Cooling Products. IMPORTANT: IF YOUR ITEM IS A LARGE ITEM AND IS MARKED AS GOING FREIGHT. Most problems can be worked out if we just communicate.
GRAINGER APPROVED 2HZL1 Rod Seal,Rod Dia. 3-1/2",Urethane - GRAINGER APPROVED 2HZL1. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZL1. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
NAUGATUCK GR20S4221B Float Ball,Round,SS,2 In - NAUGATUCK GR20S4221B. Float Ball, Stainless Steel, Internal Connection, 2 in Float Dia., Float Weight 1.64 oz, Thread Type Machine Thread, Thread Size 8-32, Max. Liquid Temp. 225 Degrees F, For Use With Liquid Level.
GRAINGER APPROVED 4PKG3 V-Ring Seal,2.283" ID,Buna N - GRAINGER APPROVED 4PKG3. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKG3. V-Ring Seal,2.283" ID,Buna N. V-Ring Seal, Inside Dia. 2.283 in, Width 0.197 in, Height 0.354 in, Temp.
GRAINGER APPROVED 4PKF8 V-Ring Seal,1.417" ID,Buna N,PK2 - GRAINGER APPROVED 4PKF8. V-Ring Seal,1.417" ID,Buna N,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKF8. V-Ring Seal, Inside Dia. 1.417 in, Width 0.197 in, Height 0.354 in, Temp.
Imo Pump 190810 G050 Mechanical Shaft Seal - Part no: 190810. part: imo ab; for stern tube l.o. pump; type acd025n6 ivbp;. 40,5mm; length 35,3mm, dwg. We are here to help and will do our best to resolve any issues. weight: 290 gm.
Burgmann 1.4571 T025 US1 UUV Mechanical Shaft Seal 190810 - Part no.: 190810. type: t025 us1 uuv. g050 shaft seal. acd025,shaft seal. We are here to help and will do our best to resolve any issues. ref no: 76488. weight: 290 gm. made in sweden.
U.S. Seal PS-239 Mechanical Seal - New in box. We do not accept responsibility on the correct application or installation of this item. This item should be installed and maintained by qualified individuals.
U.S. Seal PS-2143 Mechanical Seal - New in box. We do not accept responsibility on the correct application or installation of this item. This item should be installed and maintained by qualified individuals.
GRAINGER APPROVED 2JAY1 Piston T-Seal,Bore Dia. 4",Nitrile - GRAINGER APPROVED 2JAY1. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAY1. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZF8 Rod Seal,Rod Dia. 1/2",Urethane,PK2 - GRAINGER APPROVED 2HZF8. Rod Seal,Rod Dia. 1/2",Urethane,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZF8. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZG3 Rod Seal,Rod Dia. 1",Urethane,PK2 - GRAINGER APPROVED 2HZG3. Rod Seal,Rod Dia. 1",Urethane,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZG3. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZF9 Rod Seal,Rod Dia. 5/8",Urethane,PK2 - GRAINGER APPROVED 2HZF9. Rod Seal,Rod Dia. 5/8",Urethane,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZF9. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
SNYDER INDUSTRIES 1100001C95002 Storage Tank - SNYDER INDUSTRIES 1100001C95002. Storage Tank. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 109-862 Float Ball,Round,Plastic,6 In PK 6 - GRAINGER APPROVED 109-862. Grainger reserves the right to accept or reject any order. Grainger Part #:3FXE2-6. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
DAYTON 1MDA7 Valve, Safety,0-6 GPM PK 5 - Valve, Safety,0-6 GPM PK 5. Fluid Temp. 200 F, Body Material Brass, Wetted Materials Brass, 400 Stainless Steel, Delrin, Inlet Port (In.). 3/8 M, Max. Grainger reserves the right to accept or reject any order.
GRAINGER APPROVED 109-861 Float Ball,Round,Plastic,5 In PK 10 - GRAINGER APPROVED 109-861. Grainger reserves the right to accept or reject any order. Grainger Part #:3FXE8-10. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 4PKF5 V-Ring Seal,0.630" ID,Buna N,PK2 - GRAINGER APPROVED 4PKF5. V-Ring Seal,0.630" ID,Buna N,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKF5. V-Ring Seal, Inside Dia. 0.63 in, Width 0.118 in, Height 0.217 in, Temp.
GRAINGER APPROVED 2HZH5 Rod Seal,Rod Dia. 1-5/8",Urethane,PK2 - GRAINGER APPROVED 2HZH5. Rod Seal,Rod Dia. 1-5/8",Urethane,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZH5. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZJ2 Rod Seal,Rod Dia. 1-3/4",Urethane,PK2 - GRAINGER APPROVED 2HZJ2. Rod Seal,Rod Dia. 1-3/4",Urethane,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZJ2. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
A.R. NORTH AMERICA AL703 Regulating Valve, 3/8 In, 0 to 6.3 GPM - Valve, Regulating, Max. Fluid Temp. 194 F, Body Material Brass, Wetted Materials Brass, 300 Stainless Steel, Buna-N, Inlet Port (In.). 3/8 F, Outlet Port (In.). 3/8 F, Bypass Port (In.). 3/8 F, Max.
Weir B1036-19Mr55 Frame Plate Liner Lot Of 2 373 - WEIR B1036-19MR55 FRAME PLATE LINER LOT OF 2 373. NEW OPEN BOX. Product as pictured. All product part numbers are as pictured. All specs as pictured.
GRAINGER APPROVED 4PKH8 Piston Seal Kit,For Bore Dia. 3-1/4" - GRAINGER APPROVED 4PKH8. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKH8. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZX9 Rod Wiper,Rod Dia. 1/2",Urethane,PK5 - GRAINGER APPROVED 2HZX9. Rod Wiper,Rod Dia. 1/2",Urethane,PK5. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZX9. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
DAYTON 12F731 Fuel Hose,3/4 In NPT - Fuel Hose,3/4 In NPT. Warning: This product can expose you to chemicals including Lead which is known to the State of California to cause Cancer,and Di-isodecyl phthalate (DIDP) which is known to the State of California to cause birth defects or other reproductive harm.
DAYTON 1MDA2 Valve, Regulating,3-5.5 GPM - Valve, Regulating, Flow Range 3-5.5 GPM, Max. Fluid Temp. 190 F, Body Material Brass, Wetted Materials Brass, Stainless Steel, Buna-N, Plastic, Steel, Inlet Port (In.). 1/2 F, Outlet Port (In.). 3/8 M, Max.
New In Box, Centripro 10K92 Gould Pump Shaft Seal Kit - New In Box, Gould centripro 10K92 Pump Shaft Seal Kit. Need this URGENT?. We do our best to accommodate those urgent needs. This item is eligible for pickup unless otherwise stated.
New In Box, Centripro 10K92 Gould Pump Shaft Seal Kit - New In Box, Gould centripro 10K92 Pump Shaft Seal Kit. Missing washer. Need this URGENT?. We do our best to accommodate those urgent needs. This item is eligible for pickup unless otherwise stated.
GRAINGER APPROVED 2JAZ1 Piston Crown Seal,Bore Dia. 1-1/4" - GRAINGER APPROVED 2JAZ1. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAZ1. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZG7 Rod Seal,Rod Dia. 1-1/2",Urethane,PK2 - GRAINGER APPROVED 2HZG7. Rod Seal,Rod Dia. 1-1/2",Urethane,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZG7. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZJ6 Rod Seal,Rod Dia. 1-1/4",Urethane - GRAINGER APPROVED 2HZJ6. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZJ6. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
PALMETTO PACKING 1389 Packing Seal, 1/8 Sq In., 25 Ft - Range (F) -400 to 550, Max. Temp in Steam (F) NR, Max. Shaft Speed (ft/min) 4,300 fpm, pH Range 0 to 14. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2JAZ5 Piston Crown Seal,Bore Dia. 1-3/4" - GRAINGER APPROVED 2JAZ5. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAZ5. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2JAY3 Piston T-Seal,Bore Dia. 4-1/2",Nitrile - GRAINGER APPROVED 2JAY3. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAY3. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZK1 Rod Seal,Rod Dia. 2",Urethane - GRAINGER APPROVED 2HZK1. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZK1. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 4PKK3 PTFE Square Piston Ring Set,Dia. 2-3/4" - GRAINGER APPROVED 4PKK3. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKK3. Polytetrafluoroethylene (PTFE) square ring piston seals are used in double-acting cylinders.
PALMETTO PACKING 5000W Packing Seal, 5/8 Sq In., 5 Ft - Range (F) -100 to 650, Max. Temp in Steam (F) 1200, Max. Can Use At Low Or Zero Leakoff. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZL8 Rod Seal,Rod Dia. 4-1/2",Urethane - GRAINGER APPROVED 2HZL8. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZL8. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
PALMETTO PACKING 1347AF Packing Seal, 3/4 Sq In., 5 Ft - Range (F) -10 to 450, Max. Temp in Steam (F) NR, Max. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
GRAINGER APPROVED 2HZX3 Rod Wiper,Rod Dia. 1-1/2",Urethane,PK5 - GRAINGER APPROVED 2HZX3. Rod Wiper,Rod Dia. 1-1/2",Urethane,PK5. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZX3. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2JAW8 Piston T-Seal,Bore Dia. 1-1/2",Nitrile - GRAINGER APPROVED 2JAW8. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAW8. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZF5 Rod Seal,Rod Dia. 1-1/4",Urethane,PK2 - GRAINGER APPROVED 2HZF5. Rod Seal,Rod Dia. 1-1/4",Urethane,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZF5. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
PALMETTO PACKING 1030AF Packing Seal, 5/8 Sq In., 5 Ft - Range (F) -400 to 600, Max. Temp in Steam (F) NR, Max. Shaft Speed (ft/min) 2,000 fpm, pH Range 3 to 11. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2JAZ9 Piston Crown Seal,Bore Dia. 2-3/4" - GRAINGER APPROVED 2JAZ9. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAZ9. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
WATTS 11 Float Rod,1/4-20,10 In L,Brass - Float Rod, Material of Construction Brass, Thread Size 1/4 in -20, Length 10 in, Rod Dia. 1/4 in, For Use With Float Balls and Float Valves. Float Rod,1/4-20,10 In L,Brass. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZG5 Rod Seal,Rod Dia. 1-1/4",Urethane,PK2 - GRAINGER APPROVED 2HZG5. Rod Seal,Rod Dia. 1-1/4",Urethane,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZG5. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2JAZ4 Piston Crown Seal,Bore Dia. 1-5/8" - GRAINGER APPROVED 2JAZ4. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAZ4. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZF7 Rod Seal,Rod Dia. 3/8",Urethane,PK2 - GRAINGER APPROVED 2HZF7. Rod Seal,Rod Dia. 3/8",Urethane,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZF7. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2JAZ3 Piston Crown Seal,Bore Dia. 1-1/2" - GRAINGER APPROVED 2JAZ3. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAZ3. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2JAX8 Piston T-Seal,Bore Dia. 3-1/2",Nitrile - GRAINGER APPROVED 2JAX8. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAX8. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2JAZ2 Piston Crown Seal,Bore Dia. 1-3/8" - GRAINGER APPROVED 2JAZ2. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAZ2. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2JBA1 Piston Crown Seal,Bore Dia. 3",Urethane - GRAINGER APPROVED 2JBA1. Grainger reserves the right to accept or reject any order. Grainger Part #:2JBA1. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2JAX1 Piston T-Seal,Bore Dia. 1-3/4",Nitrile - GRAINGER APPROVED 2JAX1. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAX1. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
PALMETTO PACKING 1389 Packing Seal, 1/8 Sq In., 10 Ft - Range (F) -400 to 550, Max. Temp in Steam (F) NR, Max. Shaft Speed (ft/min) 4,300 fpm, pH Range 0 to 14. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZG6 Rod Seal,Rod Dia. 1-3/8",Urethane,PK2 - GRAINGER APPROVED 2HZG6. Rod Seal,Rod Dia. 1-3/8",Urethane,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZG6. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZX5 Rod Wiper,Rod Dia. 1-7/8",Urethane,PK5 - GRAINGER APPROVED 2HZX5. Rod Wiper,Rod Dia. 1-7/8",Urethane,PK5. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZX5. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
New In Box, Centripro 10K92 Gould Pump Shaft Seal Kit - New In Box, Gould centripro 10K92 Pump Shaft Seal Kit. Need this URGENT?. We do our best to accommodate those urgent needs. This item is eligible for pickup unless otherwise stated.
GRAINGER APPROVED 4PKH1 Rod Seal Kit,For Rod Dia. 5/8" - GRAINGER APPROVED 4PKH1. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKH1. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 4PKG1 V-Ring Seal,1.772" ID,Buna N - GRAINGER APPROVED 4PKG1. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKG1. V-Ring Seal,1.772" ID,Buna N. V-Ring Seal, Inside Dia. 1.772 in, Width 0.197 in, Height 0.354 in, Temp.
TACO 110-254SF-1 Flange Kit,1 1/2" FNPT,SS - Flange Kit,1 1/2" FNPT,SS. TACO 110-254SF-1. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
FLOWSERVE 21-112-04 Seal,Pump Shaft - FLOWSERVE 21-112-04. Seal,Pump Shaft. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
GRAINGER APPROVED 2HZH3 Rod Seal,Rod Dia. 1-1/4",Urethane,PK2 - GRAINGER APPROVED 2HZH3. Rod Seal,Rod Dia. 1-1/4",Urethane,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZH3. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
Grundfos 96479922, CHI, CHIE 2,4 BUUE Model B-C Shaft Seal Kit - If there are multiple available for sale you may not receive the one photoed, but they are all in similar condition. The item is in new condition. Everything included is shown in the photos.
FLOWSERVE 21-137-04 Seal,Pump Shaft - FLOWSERVE 21-137-04. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.
GRAINGER APPROVED 2JAY9 Piston Crown Seal,Bore Dia. 1-1/8" - GRAINGER APPROVED 2JAY9. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAY9. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
Weir Cam3036-19Mr55 Liner Frame Plate Seal Rubber 373 - WEIR CAM3036-19MR55 LINER FRAME PLATE SEAL RUBBER 373. New - Open box old stock. Product as pictured. All product part numbers are as pictured. All specs as pictured.
Alcatel Adixen Vacuum Pump Maintenance Repair Gasket Kit - It is also subject to change during peak periods. We work hard to include a lot of pictures of each item. We take joy in helping you get the gear you want at the price you need.
Weir E4018Tl1R55 Cover Plate Liner Slurry Pump 373 - WEIR E4018TL1R55 COVER PLATE LINER SLURRY PUMP 373. New - Open box old stock. Product as pictured. All product part numbers are as pictured. All specs as pictured.
GRAINGER APPROVED 5UWG5 Container - GRAINGER APPROVED 5UWG5. Grainger reserves the right to accept or reject any order. Grainger Part #:5UWG5. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
Aesseal AQCSSC12L01 Patronenmontierte Doppeldichtung CDM 1.500 Aes Seal - Designation: Cartridge-mounted double seal with self-aligning counter rings Can be used in agitators with top drive, also with long shaft overhang Bulky goods are sent by us via a forwarding agency. Shipping is "free curb". It is of course our goal that your goods are delivered quickly and in perfect condition. If this is not the case, please contact us so that we can find a solution immediately. Please do not be hasty with a negative rating! If you are not satisfied with the delivered product, please contact us first to find a mutual solution. When shipping to non-EU countries, additional taxes or costs (e.g. customs duties) are incurred as part of your order, which we do not pay or cover. shall be invoiced by us, but shall be paid directly by you to the relevant customs or tax authori.
Ge U606P325L2987 Tap Stud 373 - GE U606P325L2987 TAP STUD 373. NEW OPEN BOX. Product as pictured. All product part numbers are as pictured. All specs as pictured.LOCAL PICK UP OR FREIGHT AVAILABLE. MESSAGE FOR FREIGHT QUOTE.
GRAINGER APPROVED 4PKH9 Piston Seal Kit,For Bore Dia. 4" - GRAINGER APPROVED 4PKH9. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKH9. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
TACO 110-253F-1 Flange,1 1/4" FNPT,Cast Iron - Flange,1 1/4" FNPT,Cast Iron. TACO 110-253F-1. Diversion contrary to U.S. law is prohibited. Order Acceptance. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
Gorman Rupp 83 B.r. Brass Pump Seal Liner..nos - But when available in multiple quantity, the photo shown is representative of the item. What's Included?. See photos. We try our best to provide full details of each item and any included accessories, but if it's not shown in the photos then it will not be included with the item.
Hercules Rod Seal 94A Urethane RTU25-3.00-37 - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted. We are not an authorized dealer of this product. This product has no manufacturers warranty.
Stationary Seal Carbon 736 - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted. We are not an authorized dealer of this product. This product has no manufacturers warranty.
GRAINGER APPROVED 2HZJ7 Rod Seal,Rod Dia. 1-3/8",Urethane - GRAINGER APPROVED 2HZJ7. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZJ7. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZG1 Rod Seal,Rod Dia. 3/4",Urethane,PK2 - GRAINGER APPROVED 2HZG1. Rod Seal,Rod Dia. 3/4",Urethane,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZG1. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
Taco Silver Cast Iron Comfort Solution Replacement Cartridge Assembly Used - This item has been professionally inspected and is authentic. Taco Silver Cast Iron Comfort Solution Replacement Cartridge Assembly Used Condition: Used - Has blemishes - Includes what's pictured - Returns accepted - Please see photos before purchasing Brand: Taco Type: Cartridge Assembly Color: Silver Features: High Quality .
328E-80-1A 328E801A Tri Clover Carbon Seal - Manufacturer's Warranty and Support DO NOT apply. We are NOT Authorized Distributor of this item. Condition USED. MPN 328E-80-1A. UPC DOES NOT APPLY.
Snyder Industries 5710102N95705 Storage Tank,Closed Top,Vertical,150 Gal - SNYDER INDUSTRIES. Storage Tank, Closed Top, Vertical Double Wall, Tank (Gal.). 33-3/4, Height (In.). 61-5/8, Tank Bottom Dia. 31, Fill Opening Dia. 12, Connection (In.). 2, Fitting Type Polyproylene, Wall Thickness (In.).
GRAINGER APPROVED 2JAX3 Piston T-Seal,Bore Dia. 2-1/4",Nitrile - GRAINGER APPROVED 2JAX3. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAX3. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
FLOWSERVE 21-062-50 Seal,Pump Shaft,5/8 In PK 6 - FLOWSERVE 21-062-50. Seal,Pump Shaft,5/8 In PK 6. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
GRAINGER APPROVED 2JAX6 Piston T-Seal,Bore Dia. 3",Nitrile - GRAINGER APPROVED 2JAX6. Grainger reserves the right to accept or reject any order. Grainger Part #:2JAX6. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 2HZH4 Rod Seal,Rod Dia. 1-1/2",Urethane,PK2 - GRAINGER APPROVED 2HZH4. Rod Seal,Rod Dia. 1-1/2",Urethane,PK2. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZH4. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
GRAINGER APPROVED 4PKJ7 PTFE Square Piston Ring Set,Dia. 1-1/2" - GRAINGER APPROVED 4PKJ7. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKJ7. Polytetrafluoroethylene (PTFE) square ring piston seals are used in double-acting cylinders.
NEW Timken 415379 Nitrile Oil Seal - Solid, 3.750 in Shaft, 4.756 in OD, 0.500 i - NEW Timken 415379 Nitrile Oil Seal - Solid, 3.750 in Shaft, 4.756 in OD, 0.500 in Width, 41 Design, Nitrile Lip Material. Title: NEW Timken 415379 Nitrile Oil Seal - Solid, 3.750 in Shaft, 4.756 in OD, 0.500 in Width, 41 Design, Nitrile Lip Material.
NEW C26 Sleeve Shaft Pump Long 4-1/4'' OAL - Title: NEW C26 Sleeve Shaft Pump Long 4-1/4" OAL. Model: C26. We're down to earth, easy to work with people. Fast Dispatch Service.
FLOWSERVE 21-062-50 Seal,Pump Shaft,5/8 In - FLOWSERVE 21-062-50. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.
FLOWSERVE 21-100-04 Seal,Pump Shaft,1 In - FLOWSERVE 21-100-04. Seal,Pump Shaft,1 In. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
FLOWSERVE 21-125-13 Seal,Pump Shaft - FLOWSERVE 21-125-13. Seal,Pump Shaft. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
FLOWSERVE 21-125-06 Seal,Pump Shaft - FLOWSERVE 21-125-06. Seal,Pump Shaft. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
GRAINGER APPROVED 4PKK1 PTFE Square Piston Ring Set,Dia. 2-1/4" - GRAINGER APPROVED 4PKK1. Grainger reserves the right to accept or reject any order. Grainger Part #:4PKK1. Polytetrafluoroethylene (PTFE) square ring piston seals are used in double-acting cylinders.
FLOWSERVE 21-075-98 Seal,Pump Shaft,3/4 In PK 5 - FLOWSERVE 21-075-98. Seal,Pump Shaft,3/4 In PK 5. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
FLOWSERVE 68-062-13 Seal,Pump Shaft,5/8 In PK 6 - FLOWSERVE 68-062-13. Seal,Pump Shaft,5/8 In PK 6. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
FLOWSERVE 21-062-22 Seal,Pump Shaft,5/8 In PK 5 - FLOWSERVE 21-062-22. Seal,Pump Shaft,5/8 In PK 5. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
FLOWSERVE 21-062-23 Seal,Pump Shaft,5/8 In PK 5 - FLOWSERVE 21-062-23. Seal,Pump Shaft,5/8 In PK 5. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
FLOWSERVE 21-125-04 Seal,Pump Shaft PK 5 - FLOWSERVE 21-125-04. Seal,Pump Shaft PK 5. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
GRAINGER APPROVED 109-862 Float Ball,Round,Plastic,6 In - GRAINGER APPROVED 109-862. Grainger Part #:3FXE2. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
FLOWSERVE 16-062-03 Seal,Pump Shaft,5/8 In PK 10 - FLOWSERVE 16-062-03. Seal,Pump Shaft,5/8 In PK 10. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
Flowserve 51-125-05 Seal,Pump Shaft - Trim-Lok Egb7/16-250 Black Vinyl Edge Guard 250 Ft. L, 7/16" H. General Purpose. Zoro Select 32Tl82 Moving Harness,700 Lb.,Pk2. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes.
NEW PumpWorks 760-00108-0000 Locknut Lock Nut N9 CA - NEW EagleBurgmann 760-00108-0000 Locknut Lock Nut N9 CA. We're down to earth, easy to work with people. Quality Products at Lowest Prices. Fast Dispatch Service.
NEW Timken 473474 Nitrile Oil Seal - Solid, 2.375 in Shaft, 3.066 in OD, 0.375 i - NEW Timken 473474 Nitrile Oil Seal - Solid, 2.375 in Shaft, 3.066 in OD, 0.375 in Width, 47 Design, Nitrile Lip Material. Title: NEW Timken 473474 Nitrile Oil Seal - Solid, 2.375 in Shaft, 3.066 in OD, 0.375 in Width, 47 Design, Nitrile Lip Material.
Lot of 2 NEW SKF N 07 N Series Bearing Lock Nut - 1.376-18 in Thread Size, 2-1/1 - Lot of 2 NEW SKF N 07 N Series Bearing Lock Nut - 1.376-18 in Thread Size, 2-1/16 in OD, 1.813 in Face Dia., 7/16 in Width, Steel. Title: Lot of 2 NEW SKF N 07 N Series Bearing Lock Nut - 1.376-18 in Thread Size, 2-1/16 in OD, 1.813 in Face Dia., 7/16 in Width, Steel.
New Skf 22015 Oil Seal 56X70X8 - Model: 22015. MPN: 22015. Fast Dispatch Service. We're down to earth, easy to work with people.
FLOWSERVE 21-087-04 Seal,Pump Shaft,7/8 In PK 4 - FLOWSERVE 21-087-04. Seal,Pump Shaft,7/8 In PK 4. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
FLOWSERVE 16-100-03 Seal,Pump Shaft - FLOWSERVE 16-100-03. Seal,Pump Shaft. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose. Certain products may not be available for sale in all areas.
Dayton 1Mpp2 Unloader Valve,Flow Range .25-7.8 Gpm - Unloader Valve, Regulating, Flow Range. 25-7.8 GPM, Max. Fluid Temp. 190 F, Body Material 303 Stainless Steel, Inlet Port (In.). 3/8 Female, Outlet Port (In.). 3/8 Female, Max. Light Industrial. & Recepticles.
Cornell Pump Lip Seal A17073A-18 - NEW - Cornell Pump Lip Seal A17073A-18 - NEW, sold by the each. Shipped FREE to the USA. Offers on multi-unit purchases only please. Thanks for looking.
Aesseal Doppeldichtung Seal for Hochviskose Schlämme AZT05657TTTCV01 - Aesseal double seal seal for high viscosity slurries AZT05657TTTCV01 Aesseal double seal for high viscosity slurries AZT05657TTTCV01 Aesseal double seal for high viscosity slurries AZT05657TTTCV01 1 x Aesseal High Viscosity Slurry Double Seal AZT05657TTTCV01 Do you have any questions about our offers? Contact us via the eBay contact form. If your item is to be sent by a forwarding agent, we need a telephone number on which you can be reached during the day so that the item can be handed over to the forwarding agent and the forwarding agent can notify you of the delivery. After the purchase, you will automatically receive a separate e-mail in which you will be asked to provide a telephone number. It is not possible to agree a fixed date in advance. Please ensure that someone is avail.
Parker Seal Black 1375-2445-469 - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
Wärtsilä Centrifugal Filter Seal Kit FM200DS - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
Federal-Mogul Mechanical Face Seal 76.97H-09 - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
Taco Freedom Flange Iron 2" NPT 194-2348 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
12729VA Banjo Viton Acid Seal For 2” And 3” Banjo Poly Pumps - 12729VA Banjo Viton Acid Seal For 2” And 3” Banjo Poly Pumps. This seal is built different then the normal poly Banjo pump seal , this Viton Acid seal has the spring built to the inside of the seal so that the spring is not exposed to what ever is being pumped and the seal housing is made of a poly material,not metal. Ideal for pumping more aggressive material or a really long lasting seal if your pumping normal fluids .
PALMETTO PACKING Packing Seal, 5/16 Sq In., 10 Ft 1389 - Range (F) -400 to 550, Max. Temp in Steam (F) NR, Max. Shaft Speed (ft/min) 4,300 fpm, pH Range 0 to 14. Length : 10 ft. Length (Straight Wireway) : 10 ft. Material : 100% GFO(TM) Expanded PTFE with Graphite.
Taco 194-1540Sf-1 Flange Kit,Pipe Size 1 1/4 In.Npt,Ss,Pk2 - Eaton Weatherhead 1461X12 Nut,3/4 In Tube Sz,Pk10. Zoro Select L04121.100.0001 Hex Nut,Gr Class 10,M10-1.50,Zp,Pk1000. Zoro Select Zusa-Pu-155 Foam Sheet, Open Cell, 24 In W, 72 In L, 3 In Thick. Wiegmann Rsc101206gnk Nema 3R 12.0 In H X 10.0 In W X 6.0 In D Wall Mount.
WHEELER-REX 3917 Output Hose,High Pressure,10 Ft,1/4 In - WHEELER-REX 3917. Output Hose,High Pressure,10 Ft,1/4 In. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order.
Poolrite 22230 Pool Pump Replacement Mechanical Seals 10 x included - Poolrite - Enduro EP-550,EP-750,EP-930,EP-1100,EP-1500. This Seal Fits the Following Pump Models. Suitable for the following Onga Pump Models. Fits Onga Centrifugal Pump Models. Carbon vs Ceramic. MC55,MC65-B/SHAFT.
GRAINGER APPROVED 2HZW5 Rod Wiper,Rod Dia. 5/8",Urethane,PK5 - GRAINGER APPROVED 2HZW5. Rod Wiper,Rod Dia. 5/8",Urethane,PK5. Grainger reserves the right to accept or reject any order. Grainger Part #:2HZW5. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
TACO Cartridge, For 4JB22, 4PC90 007-042RP - For Use With Grainger Item Number : 4JB22, 4PC90. For Pump Number : 4JB22, 4PC90. Compatible with Grainger Part Number : 4JB22, 4PC90. Compatible with Series : 007. Model Number : 007-F5, 007-F5-7IFC.
FLOWSERVE 21-100-250 Seal,Pump Shaft,1 In - FLOWSERVE 21-100-250. Rotary unit has a crimped head to withstand higher pressures and shaft speeds; stays in-place during installation and protects against being dislodged by foreign material. Hex-shaped outer shell reduces stress on components.
Flowserve Guide Retainer 009326.150.000 2.00 Stem - Guide Retainer. The item you receive may be different from the actual item in the photo in the case of multiple quantity lots. 316 Stainless Steel.
U.s. Seal Ps-231 Mechanical Seal Shaft Od .75 78106 - SCL #: 78106. Mfg: U.S. SEAL. 2015 Federal Regional Standards for Heating and Cooling Products. IMPORTANT: IF YOUR ITEM IS A LARGE ITEM AND IS MARKED AS GOING FREIGHT. Most problems can be worked out if we just communicate.
U.s. Seal Ps-372 Mechanical Seal Shaft Ow:.625 - Mfg: U.S. SEAL. 2015 Federal Regional Standards for Heating and Cooling Products. IMPORTANT: IF YOUR ITEM IS A LARGE ITEM AND IS MARKED AS GOING FREIGHT. World’s Largest Distributor of Excess Air Conditioning.
Garlock Bronze 29699-0674 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
Buna Shaft Seal 5/8" Shaft 1000 - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you!
Complete Seal Kit LF 20280 - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
Flowserve 31-075-10 Seal,Pump Shaft,3/4 In - Zoro Select B38130.037.0001 Flat Washer, Fits Bolt Size 3/8 In Steel, Zinc. Kuriyama Fire Products Ghi1armtr50n Fire Hose,50 Ft. L,Red,1" Dia,Rocker Lug. General Purpose. & Recepticles. Electrical Outlets.
FLOWSERVE Seal, Pump Shaft, 1/2 In 21-050-04 - Shaft Size (In.). Seal Type : 21. Seal Material : -. Standard Industry Seal Number : 1002, 168. Gasket Material : Rubber. Seat Bore : 1.0 in. Seat Thickness : 0.312 in. Seal Type Designation : 21.
DAYTON Fuel Hose, 3/4 In NPT 12F731 - Inlet : 3/4 in NPT. Outlet : 3/4 in NPT. Item : Fuel Hose. Accessory Type : Fuel Hose. Length : 12 ft. Length (Straight Wireway) : 12 ft. Best Match. Size : 3/4 in.
JOHN CRANE - CFD-1105 - CF-D-1105 - 1" Mechanical Seal Complete - (NEW in BOX) - JOHN CRANE INC. Baltimore and surrounding areas since 1996. But with our eyes now open we put a lot of effort in bringing you high end industrial and electrical parts as well. We literally have NO idea what we have coming around corner, so make sure you add us to your favorites and check back often.
TACO 110-251SF-1 Flange Kit,3/4" FNPT,SS - Flange Kit,3/4" FNPT,SS. TACO 110-251SF-1. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
U.S. Seal Manufacturing PS-163V 1/2" Pump Shaft Seal, Viton - Viton Secondary Seals. Carbon Primary Rings. Seal Size1/2". Stainless Steel Springs. Mfg. Part #. You may be asked to provide pictures or to send the incorrect product(s) back to us (at our expense).
Mechanical Water Pump Seal Blower Diving 1 3/4" 44.45MM TiC Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
John Crane Pump Seal Kit 2-477-019-999-00 - The unit appears to be new and unused by the previous owner. Overall the unit appears to be in excellent, new, ready to use condition. The unit includes everything shown in photos. Pump Seal Kit.
Lot of 5 NEW Eriks Shaft Seal 2x35x7mm - For sale is a Lot of 5 NEW Eriks Shaft Seal 2x35x7mm. The unit appears to be new and unused by the previous owner. Overall the unit appears to be in excellent, new, ready to use condition. The unit includes everything shown in photos.
Snyder Industries 1170000N95003 Storage Tank, Rectangular, 50 Gal. - SNYDER INDUSTRIES. Zoro Select 5Dtd0 12" X 8" Open Poly Bags, 1.25 Mil, Clear, Pk 1000. Morse Zweg083c1014mat-11' 3 Band Saw Blade, 11 Ft. 3 In L, 1" W, 10/14 Tpi. & Recepticles. Electrical Outlets. Light Industrial.
FLOWSERVE Seal, Pump Shaft 31-112-10 - Shaft Size (In.). : 1 1/8 in. Seal Type : 21. Seal Material : -. Seat Bore : 1.75 in. Seat Thickness : 0.437 in. Best Match. Nominal Working Length (In.).
Roper Rotary Pump Mechanical Seal 678 - ROPER ROTARY PUMP MECHANICAL SEAL 678. New Old stock. Product as pictured. All product part numbers are as pictured. All specs as pictured. Box has been exposed to the elements.
Snyder Industries 5700000N97208 Storage Tank,Vertical Open Top, 120 Gal. - SNYDER INDUSTRIES. Zoro Select 5Tpd2 Single Rod Pegboard Hook,4 In,Pk10. Zoro Select 5Tpg4 Single Rod Pegboard Hook,6 In,Pk10. Zoro Select 5Tpg6 Double Rod Pegboard Hook,2-13/16 In,Pk10. Zoro Select 5Tpd8 Double Rod Pegboard Hook,8-1/4 In,Pk5.
New Milton Roy 56525 Union End 1/2 Npt Female Pvc - We try to be as descriptive as possible for each item and represent each item in the pictures. If you have to get a hold of us, look us up on the net. What is your phone number and extension if you have one?.
Taco 110-252F-1 Flange,1 In Flanged, Cast Iron,Pk2 - Dasco Pro 337 Flat Utility Chisel, 1-1/4" Tip X 12" L. Norton Abrasives 66623325941 Hook/Loop Disc,No Hole,5 In.,Xf,320G. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes.
New In Box, Centripro 10K170 Gould Pump Shaft Seal Kit - New In Box, Gould centripro 10K170 Pump Shaft Seal Kit. Need this URGENT?. We do our best to accommodate those urgent needs. This item is eligible for pickup unless otherwise stated.
Watts 11 Float Rod,1/4-20,10 In L,Brass - Float Rod, Material of Construction Brass, Thread Size 1/4 in -20, Length 10 in, Rod Dia. 1/4 in, For Use With Float Balls and Float Valves. Zoro Select B08450.075.1200 Lag Screw, 3/4 In, 12 In, Steel, Hot Dipped.
Denison Hydraulics 035-11826 Shoe Plate, Refurbished - Denison Hydraulics 035-11826 Shoe Plate For Hydraulic Pump. Surplus part from a hydraulic repair shop. The plate has been refurbished. It’s coated in cosmoline. What you see in the photos is what you will receive.
Sauer Danfoss 151B1072 Disc Valve, Used - Sauer Danfoss 151B1072 Disc Valve. Looks like it’s been installed but it’s in very good condition. What you see in the photos is what you will receive.
Union 806A0138201 E11500 Impeller Wear Ring 678 - UNION 806A02382-01 A643-CA15 IMPELLER WEAR RING 678. 806A0138201 E11500NEW OPEN BOX. Box has been exposed to the elements. Product as pictured. All product part numbers are as pictured. All specs as pictured.
Grundfos 96525457 Shaft Seal Kit Cr/N 32-150 Hqbe. - ONLY " GRUNDFOS 96525457 SHAFT SEAL KIT CR/N 32-150 HQBE. ". NO OTHER ACCESSORIES ARE INCLUDED. DO NOT REMOVE SECURITY SEAL. See the Pictures before Order. You will get what you see in the pictures.
Grundfos 96525457 Shaft Seal Kit Cr/N 32-150 Hqbe. - ONLY " GRUNDFOS 96525457 SHAFT SEAL KIT CR/N 32-150 HQBE. ". NO OTHER ACCESSORIES ARE INCLUDED. DO NOT REMOVE SECURITY SEAL. See the Pictures before Order. You will get what you see in the pictures.
Union Pump 808B0177300G11500 Back Case Ring 678 - UNION PUMP 808B0177300G11500 BACK CASE RING 678. NEW OPEN BOX. Box has been exposed to the elements. Product as pictured. All product part numbers are as pictured. All specs as pictured.
Union 808B0184100E11501 Ring 416 Sstl 678 - UNION 808B0184100E11501 RING 416 SSTL 678. NEW OPEN BOX. Box has been exposed to the elements. Product as pictured. All product part numbers are as pictured. All specs as pictured.
Union 806B0184000E11500 Impeller Ring 678 Lot Of 2 - UNION 806B0184000E11500 IMPELLER RING 678 LOT OF 2. UNTESTED. Product as pictured. All product part numbers are as pictured. All specs as pictured.
Union 808B0177301G11500 Front Case Ring 678 - UNION 808B0177301G11500 FRONT CASE RING 678. NEW OPEN BOX. Box has been exposed to the elements. Product as pictured. All product part numbers are as pictured. All specs as pictured.
Union Pump 806B0191103R53 Front Impeller Wear Ring 678 - UNION PUMP 806B0191103R53 FRONT IMPELKER WEAR RING 678. NEW OPEN BOX. Box has been exposed to the elements. Product as pictured. All product part numbers are as pictured. All specs as pictured.
Union Pump 808A0196500 E11501 Wear Ring 678 - UNION PUMP 808A0196500 E11501 WEAR RING 678. NEW OPEN BOX. Box has been exposed to the elements. Product as pictured. All product part numbers are as pictured. All specs as pictured.
Union Pump 808Ap237N00E501 Back Case Ring 678 - UNION PUMP 808AP237N00E501 BACK CASE RING 678. NEW OPEN BOX. Product as pictured. All product part numbers are as pictured. All specs as pictured.
Union Pump 806A0243301 E11500 Wear Ring 678 - UNION PUMP 806A0243301 E11500 WEAR RING 678. NEW OPEN BOX. Product as pictured. All product part numbers are as pictured. All specs as pictured.
Union Pump 808A02370/00 E11501 Ring Case 678 - UNION PUMP 808A02370/00 E11501 RING CASE 678. NEW OPEN BOX. Product as pictured. All product part numbers are as pictured. All specs as pictured.
Union Pump 806A0196700E11500 Front Impeller Ring 678 - UNION PUMP 806A0196700E11500 FRONT IMPELLER RING 678. NEW OPEN BOX. Box has been exposed to the elements. Product as pictured. All product part numbers are as pictured. All specs as pictured.
U.S. Seal PS-1905 5/8" Pump Shaft Seal, SCS Series - Seal Size5/8". Stainless Steel Springs. Gecko Alliance, IncA Series. Mfg. Part #. HP Series U109-136SS. Astral PoolAstramax Series 1600. A & B Series. You may be asked to provide pictures or to send the incorrect product(s) back to us (at our expense).
Denison Hydraulics 035-72176-0 Retaining Ring, New - Denison Hydraulics 035-72176-0 Retaining Ring. New surplus with factory packaging. The exterior of the factory packaging is dirty from storage, but the ring is in new condition. What you see in the photos is what you will receive.
Lot Of 3 Denison Hydraulics 350-10067 Finger Spring Washer, New - Lot Of 3 Denison Hydraulics 350-10067 Finger Spring Washer. New surplus with factory packaging. The exterior of the factory packaging is dirty from storage, but the washers are in new condition. What you see in the photos is what you will receive.
Denison Hydraulics 034-49975 Felt Wiper For M4C Hydraulic Pump, New - Denison Hydraulics 034-49975 Felt Wiper For M4C Hydraulic Pump. New surplus in factory sealed packaging. The exterior of the factory packaging is dirty from storage, but the wiper is in new condition. What you see in the photos is what you will receive.
Denison Hydraulics 605-10020 Felt Wiper For M4D Hydraulic Pump, New - Denison Hydraulics 605-10020 Felt Wiper For M4D Hydraulic Pump. New surplus with factory packaging. The exterior of the factory packaging is dirty from storage, but the wiper is in new condition. What you see in the photos is what you will receive.
Harwal Type ADL 40 x 90 x 8 NBR Oil Seal - MPN: Type ADL. We choose the carrier. Prefer to pick it up yourself?. To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly.
Harwal Type A 18 x 26 x 04 NBR Oil Seal Lot Of 4 - MPN: Type A. We choose the carrier. Prefer to pick it up yourself?. Warehouse Location: M43215. To get a freight quote we will need to know the following Country of Manufacture: N/A. Need it urgently?.
FLOWSERVE Seal, Pump Shaft 21-125-04 - Shaft Size (In.). : 1 1/4 in. Seal Material : -. Seal Type : 21. Standard Industry Seal Number : 11204, 185, 786. Seat Bore : 1.875 in. Seat Thickness : 0.437 in. Best Match.
ZORO SELECT Float Ball, Round, Copper, 6 In 109-872 - Float Ball, Copper, Internal Connection, 6 in Float Dia., Thread Size 1/4 in -20, Max. Liquid Temp. 180 Degrees F, For Use With 3FXF3, 3FXF4, 3FXF7. Item : Float Ball. Float Dia. Product Type : Float Ball.
Flowserve 657235 746729 1" Shaft - Holden Steel Components, LLC. We do not buy direct from the manufacturers or from authorized dealers. The serial numbers in the pictures are covered to prevent mischief by hackers or others that want to cause harm.
FLOWSERVE Seal, Pump Shaft, 1 In, 21-100-04 - Shaft Size (In.). Seal Type : 21. Seal Material : -. Standard Industry Seal Number : 235, 380, 813. Seat Bore : 1.625 in. Seat Thickness : 0.437 in. Best Match. Nominal Working Length (In.).
FLOWSERVE Seal, Pump Shaft, 5/8 In 21-062-23 - Shaft Size (In.). Seal Type : 21. Seal Material : -. Standard Industry Seal Number : 359V. Seat Bore : 1.25 in. Seat Thickness : 0.406 in. Best Match. Nominal Working Length (In.).
AESSEAL 3AVCT14A01 Single Cartridge Seal 1.750-14 - · Zero defects. · Hardware required for key functions to be tested may have been removed after testing (e.g. Hard Drive). · All missing components or parts will be listed for each item. · Repaired with OEM original parts.
U.S. Seal Manufacturing PS-671 3/8" Pump Shaft Seal - Seal Size3/8". Stainless Steel Springs. Mfg. Part #. You may be asked to provide pictures or to send the incorrect product(s) back to us (at our expense). (starting at the date you received the product).
Dayton 4JMY8 Pump Shaft Seal Kit 3/4" Shaft - Item Pump Shaft Seal Kit. Shaft Size (In.). Seal Type 21. Seal Bore (In.). Seal Material Carbon, Ceramic, Viton. Includes Seal and O-Ring. Seat Bore 1.375 in.
Grundfos 495078 Kit Shaft Seal Umt/Upt Bube 16Mm - Product real images uploaded, you will get what is shown in the images. We 4_Square deals in all type of Industrial & Marine Automation, Electrical, Hydraulic and Generator Spares. No dings, no dents.
PARKER 22-A0310-400 FILTER 10 INCH 40um - These products are subject to export restrictions under U.S. law. Item Condition: NEW, OPEN BOX, as seen in pictures.
Flowserve 160156 Seal Shaft Springload - These products are subject to export restrictions under U.S. law. Item Condition: NEW, OPEN BOX, as seen in pictures.
LOT OF 2 Mechanical Shaft Pump Seals 0625 0718 NEW - No manufacturer markings. One rubber part is stamped 0625 and 0718. See photos for details. You can also request an estimate before buying as well!
Mechanical Shaft Seal Replacement for Pool Spa Pump 104-20 - Specifications:Seal Size:Height: 21.5mm / 0.85-inchInner Diameter: 20.3mm / 0.8-inchOuter Diameter(Max.): 33.1mm / 1.3-inch Ring Size:Inner Diameter: 22.2mm / 0.87-inchOutter Diameter: 36.3mm / 1.43-inchHeight: 7.3mm / 0.29-inch Model: 104-20Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C) Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures. .
Mechanical Shaft Seal Replacement Part for Pool Spa Pump 103-17 - Specifications:Seal Size:Height: 18mm / 0.71-inchInner Diameter: 18.8mm / 0.74-inchOuter Diameter(Max.): 29.6mm / 1.17-inch Ring Size:Inner Diameter: 20.6mm / 0.81-inchOuter Diameter: 35.3mm / 1.39-inchHeight: 6.9mm / 0.27-inch Model: 103-17Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C) Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures. .
Bell & Gossett Seal Bearing Assembly Series 100 Model # 118844LF G91 - Bell & Gossett Seal Bearing Assembly Series 100 Model # 118844LF G91. Local pickup in Utah is accepted by seller. See pictures to see actual part you will receive. As shown in the photographs. Message me with any questions.
Dayton 12F732 Fuel Hose,1 In Npt - Zoro Select Cq3005l Open Head Transport Drum, Steel, 30 Gal, Lined, Black. Council Tool Bo875 Back-Out Punch,W/ Handle,7/8 X 15 In L. Te-Co 40950 Double-End Threaded Stud, 3/4"-10 Thread To 3/4"-10 Thread, 3 In.
U.S. Seal Manufacturing PS-702 5/8" Pump Shaft Seal - Seal Size0.625. U.S. Seal Mfg Cross Reference. Temperature°F to °F. Stainless Steel Springs. Mating Ring Bore1.187”. Ceramic Mating Rings. Molded Plastic Primary Rings.
Mechanical Shaft Seal Replacement for Pool Spa Pump 104-16, Pack of 2 - Specifications:Seal Size:Height: 19.5mm / 0.77-inchInner Diameter: 16.6mm / 0.65-inchOuter Diameter(Max.): 26.7mm / 1.05-inch Ring Size:Inner Diameter: 18.5mm / 0.73-inchOuter Diameter: 28.3mm / 1.11-inchHeight: 7mm / 0.28-inch Model: 104-16Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C) Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures. .
Mechanical Shaft Seal Replacement for Pool Spa Pump 108-12 - Specifications:Seal Size:Height: 24.5mm / 0.96-inchInner Diameter: 12.4mm / 0.49-inchOuter Diameter(Max.): 22mm / 0.87-inch Ring Size:Inner Diameter: 13.1mm / 0.52-inchOutter Diameter: 26.3mm / 1.04-inchHeight: 6.1mm / 0.24-inch Model: 108-12Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C) Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures. .
2pcs 108 8mm-30mm Inner Dia Mechanical Shaft Seal Replacement for Pool Spa Pump - Specifications:Model: 108Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C)Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures.
Crane Packing Type 1 (T1-1 3/4) Mechanical Seal - For 1 3/4" shaft w/ Collar, less End Plate & Gasket. If you don't see what you are looking for call us and we will try to locate it. When you receive the item and sign for it, you own it. Local pickup is also available.
Othmro Mechanical Shaft Seal Replacement 104-12 for Pump Shaft Water Pumps Sh... - Sealing Chamber Pressure (MPA): 0 ~ 0.6; Sealed Chamber Temperature (C): -20 ~ 80. Temperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C). It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures.
10mm-25mm Inner Diameter Mechanical Shaft Seal Replacement for Pool Spa Pump - Specifications:Model: 103 / 202 / 301Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C)Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures.
PALMETTO PACKING 1382 Packing Seal, 3/4 Sq In., 25 Ft - Compression Packing Seal, Chemical, General Service, Waste/Water Treatment, For Use In - Packing Seals Pumps, Square (In.) 3/4 in, Length 25 ft, Expanded PTFE with Graphite, Lubrication - Packing Seals Yes, Max. Pressure for Pumps (PSI) 300 psi, Max. Pressure for Valves (PSI) NR, Dull Black Color, Ambient Temp. Range (F) -400 to 550, Max. Temp in Steam (F) NR, Max. Shaft Speed (ft/min) 3,800 fpm, pH Range 0 to 14.
PALMETTO PACKING Chekseals 981 Shaft Seal,Axial Lip,1-3/4 In,PK6 - Shaft Seal, For Shaft Diameter 1 7/8 in, Gasket Material Nitrile, Compatible with Media Type Water, Water-Glycol, Water-Soluble Oil, Shaft Seal Type Axial Lip Seal, Standards ANAB Accredited, ISO 9001:2000, UL Listed, Maximum Temperature 225 Degrees F, Minimum Temperature -20 Degrees F, Package Quantity 6.
Mechanical Shaft Seal Replacement for Pool Spa Pump 3pcs 103-12 - Specifications:Seal Size:Height: 17mm / 0.67-inchInner Diameter: 12mm / 0.47-inchOuter Diameter(Max.): 22.4mm / 0.88-inch Ring Size:Inner Diameter: 13.7mm / 0.54-inchOutter Diameter: 26.2mm / 1.03-inchHeight: 5.8mm / 0.23-inch Model: 103-12Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C) Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures. .
Mechanical Shaft Seal Replacement for Pool Spa Pump 3pcs 108-19 - Specifications:Seal Size:Height: 34.9mm / 1.37-inchInner Diameter: 20.5mm / 0.81-inchOuter Diameter(Max.): 32mm / 1.26-inch Ring Size:Inner Diameter: 20.5mm / 0.81-inchOutter Diameter: 35.2mm / 1.39-inchHeight: 5.4mm / 0.21-inch Model: 108-19Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C) Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures. .
Mechanical Shaft Seal Replacement for Pool Spa Pump 2pcs XJ-25 - Specifications:Seal Size:Height: 25.5mm / 1-inchInner Diameter: 28.7mm / 1.13-inchOuter Diameter(Max.): 42.8mm / 1.69-inch Ring Size:Inner Diameter: 26mm / 1.02-inchOutter Diameter: 40.9mm / 1.61-inchHeight: 10.7mm / 0.42-inch Model: XJ-25Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C) Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures. .
Mechanical Shaft Seal Replacement for Pool Spa Pump 3pcs 108-30 - Specifications:Seal Size:Height: 44mm / 1.73-inchInner Diameter: 30.8mm / 1.21-inchOuter Diameter(Max.): 44.7mm / 1.76-inch Ring Size:Inner Diameter: 31mm / 1.22-inchOuter Diameter: 45.4mm / 1.79-inchHeight: 7.8mm / 0.31-inch Model: 108-30Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C) Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures. .
Mechanical Shaft Seal Replacement for Pool Spa Pump 2pcs 108-19 - Specifications:Seal Size:Height: 34.9mm / 1.37-inchInner Diameter: 20.5mm / 0.81-inchOuter Diameter(Max.): 32mm / 1.26-inch Ring Size:Inner Diameter: 20.5mm / 0.81-inchOutter Diameter: 35.2mm / 1.39-inchHeight: 5.4mm / 0.21-inch Model: 108-19Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C) Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures. .
Mechanical Shaft Seal Replacement for Pool Spa Pump 3pcs 108-25 - Specifications:Seal Size:Height: 40.8mm / 1.61-inchInner Diameter: 25.8mm / 1.02-inchOuter Diameter(Max.): 38.7mm / 1.52-inch Ring Size:Inner Diameter: 26mm / 1.02-inchOutter Diameter: 40.2mm / 1.58-inchHeight: 7.8mm / 0.31-inch Model: 108-25Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C) Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures. .
Aeroquip 29348 00 3” Buna Seal - PART NUMBER : 29348 00. SEAL TYPE : 3” BUNA SEAL. The item you receive may be different from the actual item in the photo in the case of multiple quantity lots.
Tri-Clover Carbon Rotating Seal - MATERIAL : CARBON. TYPE : SANITARY SEAL. The item you receive may be different from the actual item in the photo in the case of multiple quantity lots.
U.S. Seal Manufacturing PS-3960 5/8" Pump Shaft Seal - Carbon Primary Rings. Seal Size5/8". Cornell Pump Co. Stainless Steel Springs. Mfg. Part #. You may be asked to provide pictures or to send the incorrect product(s) back to us (at our expense). (starting at the date you received the product).
Grundfos 96416597 Kit Gasket Cr(N)32 1-15 Epdm - CR(N)32 1-15 EPDM. KIT GASKET. Bank Wire Transfer Accepted on large orders. 100% Genuine Product | You will get what you see in pictures.
Grundfos 96416574 Bearings Kit Cr(N)32 3-7 - GRUNDFOS 96416574 BEARINGS KIT CR(N)32 3-7 (NEW OPEN BOX). CR(N)32 3-7. BEARINGS KIT. Bank Wire Transfer Accepted on large orders.
3/4" Pool Pump Shaft Mechanical Seal - Fits the Onga and Davey Pump - Suitable for the following Onga Pump Models. Fits Onga Centrifugal Pump Models. This Seal Fits the Following Pump Models. MC55,MC65-B/SHAFT. OP1,0P1-1,OP10,OP10-1,252,OP2,OP3,SP10,SP10-1,SP25,SP26,SP30,SP50,SP50-1,150,151,152,153.
3/4" Onga Astral Pool Pump Mechanical Seal BX/TX/CX/E/CTX/P3 Part Number 75508 - Suitable for the following Onga Pump Models. Fits Onga Centrifugal Pump Models. Astral Hurlcon -- BX - CTX, CX, - E Series, FX,TX, Viron EVO series. This Seal Fits the Following Pump Models. Series SQI-300,SQI-400,SQI-500,SQI-600,SQI-700, SQI Gemini series.
Flowserve Relacement Mechanical Seals Frame Group 10 Thompson Kelly Lewis Pump - 50 x 32 - 250, 65 x 40 - 250, 65 x 40 - 250, 80 x 50 - 250, 80 x 50 - 315. Fits The Following Pump Models. 100 x 80 -160, 100 x 65 - 200, 100 x 65 - 250, 100 x 65 - 315, 125 x 80 - 250. 125 x 80 - 315, 125 x 80 - 400, 125 x 100 - 200, 125 x 100 - 250, 125 x 100 - 315.
Onga Pool Pump Shaft Mechanical Shaft Seal Onga OEM PN - 700270 Homemaster - Suitable for the following Onga Pump Models. Fits Onga Centrifugal Pump Models. This Seal Fits the Following Pump Models. MC55,MC65-B/SHAFT. OP1,0P1-1,OP10,OP10-1,252,OP2,OP3,SP10,SP10-1,SP25,SP26,SP30,SP50,SP50-1,150,151,152,153.
Onga Pump Astral Hurlcon Onga Poolrite Pump, Onga Pump Seal - Astral Hurlcon -- BX - CTX, CX, - E Series, FX,TX, Viron EVO series. Poolrite - Enduro EP-550,EP-750,EP-930,EP-1100,EP-1500. Suitable for the following Onga Pump Models. Fits Onga Centrifugal Pump Models.
Onga Pantera PPP750 Pool Pump Mechanical Seal - Fits Pantera PPP1100 & PPP1500 - Suitable for the following Onga Pump Models. Fits Onga Centrifugal Pump Models. This Seal Fits the Following Pump Models. 140,141,142,142-1,143,146,MC15,MC25,MC27,MC35,MC45. 122,MA2,MA20,MA3,MA5,MA50,MA50-1,MA6-HD2/HD2,112,TC16,TC16-1,TC25,TC26,TC27,TC30,TC40,TC46,TC50,TC56.
Onga Shallow Well Jet Pump Seal ONGA Part No 700270 503,504,JJ0,JJ1,JJ10,JJ20 - 503,504,JJ0,JJ1,JJ10. Suitable for the following Onga Pump Models. Fits Onga Centrifugal Pump Models. 140,141,142,142-1,143,146,MC15,MC25,MC27,MC35,MC45. 122,MA2,MA20,MA3,MA5,MA50,MA50-1,MA6-HD2/HD2,112,TC16,TC16-1,TC25,TC26,TC27,TC30,TC40,TC46,TC50,TC56.
Mechanical Shaft Seal Replacement for Pool Spa Pump 108-12 - Specifications:Seal Size:Height: 24.5mm / 0.96-inchInner Diameter: 12.4mm / 0.49-inchOuter Diameter(Max.): 22mm / 0.87-inch Ring Size:Inner Diameter: 13.1mm / 0.52-inchOutter Diameter: 26.3mm / 1.04-inchHeight: 6.1mm / 0.24-inch Model: 108-12Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C) Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures. .
Garlock Bronze 29699-0674 - Garlock Bronze. We appreciate your cooperation. We will make every attempt possible to resolve the issue if we made a mistake, (It happens).
Mechanical Water Pump Seal Blower Diving 40MM TS560A Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 50MM TS560A Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
MEZIERE WPX816 Hose Adapter,I.D. 1-1/2 In,1-1/2 In NPT - Hose Adapter, Connection Size 1 1/2 in x 1 1/2 in, Connection Gender Male, Compatible with Pump Type Straight Centrifugal, Compatible with Manufacturer Model Number WPX752, WPX753, WPX755, Compatible with Grainger Part Number 21C953, 21C954, 21C955, Shut Off Pressure (Maximum) 100 psi, Hose Inside Diameter 1 1/2 in.
U.S. Seal Manufacturing PS-702 5/8" Pump Shaft Seal - Seal Size5/8". Stainless Steel Springs. Mfg. Part #. You may be asked to provide pictures or to send the incorrect product(s) back to us (at our expense). (starting at the date you received the product).
U.S. Seal Manufacturing PS-501 5/8" Pump Shaft Seal - Seal Size5/8". Decatur Pump 20888. Scot Pump 118.000.340D. Teel Pump 1R315. Stainless Steel Springs. Fairbanks MorseH500, 649, 650 Shallow Well. McDonald A-Y3000, 4000 and 4100 Jet Well 5MCD4. Mfg. Part #.
Mechanical Shaft Seal with 1.5” Pipe Used - The seal is made of stainless steel. The top face is 10 3/8”. There are 8 bolt holes that are. 7” on the top face. The bottom face is 7”. The hole around the pipe is 3 3/16”. The pipe is 1.5”. NO WARRANTY.
GLE single cartridge mechanical seal for 1.75" shaft - G.L.C.+F. - Unused - Description: GLE single cartridge mechanical seal for 1.75" shaft - G.L.C.+F. - UnusedSuits 1-3/4-inch diameter shaft. Condition: Pre-owned, unused. There is no packaging.The item is fine - clean and unused. There are no instructions.
Fluiten C2S2038011507 single cartridge mechanical seal for 1.5" shaft - Unused - Description: Fluiten C2S2038011507 single cartridge mechanical seal for 1.5" shaft - UnusedSuits 1-1/2-inch diameter shaft. Condition: Pre-owned, unused. There is no packaging.The item is fine - clean and unused. There are no instructions.
Mechanical Shaft Seal Replacement for Pool Spa Pump 104-30 - Specifications:Seal Size:Height: 34mm / 1.34-inchInner Diameter: 30.8mm / 1.21-inchOuter Diameter(Max.): 45.2mm / 1.78-inch Ring Size:Inner Diameter: 31mm / 1.22-inchOutter Diameter: 46mm / 1.81-inchHeight: 8.3mm / 0.33-inch Model: 104-30Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C) Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures. .
Mechanical Shaft Seal Replacement for Pool Spa Pump 3pcs 108-30 - Specifications:Seal Size:Height: 44mm / 1.73-inchInner Diameter: 30.8mm / 1.21-inchOuter Diameter(Max.): 44.7mm / 1.76-inch Ring Size:Inner Diameter: 31mm / 1.22-inchOuter Diameter: 45.4mm / 1.79-inchHeight: 7.8mm / 0.31-inch Model: 108-30Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C) Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures. .
Mechanical Shaft Seal Replacement 22.3mm ID for Pool Spa Pump 202-20 - Specifications:Seal Size:Height: 40.8mm / 1.61-inchInner Diameter: 20.8mm / 0.82-inchOuter Diameter(Max.): 32.9mm / 1.3-inch Ring Size:Inner Diameter: 22.3mm / 0.88-inchOutter Diameter: 36.4mm / 1.43-inchHeight: 7.3mm / 0.29-inch Model: 202-20Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C) Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures. .
Rexa Koyo K05002-001 SEAL & O-RING KIT - 1.50 ROD Seal (NEW in SEALED BAG) - We can not get an accurate freight quote without out all this information. Baltimore and surrounding areas since 1996. But with our eyes now open we put a lot of effort in bringing you high end industrial and electrical parts as well.
U.S. Seal Manufacturing PS-447 5/8" Pump Shaft Seal - NotesMounts on Shaft. Carbon Primary Rings. Seal Size5/8". Seal HeadStyle B. Hydromatic Pump Co. 75480001. Lancaster Pump Co.570. Zoeller Pump Co. 001017. Stainless Steel Springs.
Taco 007-042Rp Cartridge, For 4Jb22, 4Pc90 - & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial. Rust-Oleum 249340 12 Oz.
Flowserve 21-062-22 Seal,Pump Shaft,5/8 In - Young Bros Stamp Works 02 Master Locksmith Stamp,3/32 In.,Master. General Purpose. See All Industries Tp-Dhaza Floor Stand Safety Sign,12 X 20. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures.
Flowserve 21-125-04 Seal,Pump Shaft - General Purpose. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. & Industrial.
Flowserve 16-062-15 Seal,Pump Shaft,5/8 In - Vibra-Tite 42050 Thread Sealant,White,Tube,50Ml. Versa-Matic 476. V015.000 E1 A Air Side Kit. General Purpose. Dmi 632-6204-1924 Abdominal Binder, 3-Panel, 46-62 In. & Recepticles. Electrical Outlets.
Flowserve 21-112-41 Seal,Pump Shaft - Zoro Select 5Dta6 21-1/2" X 11-1/2" Open Poly Bags, 1 Mil, Clear, Pk 1000. Zoro Select M20130.220.1000 Fully Threaded Rod, M22-2.5Mm, 1 M, Steel, Class. General Purpose. & Recepticles. Electrical Outlets.
Flowserve 21-150-04 Seal,Pump Shaft - General Purpose. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. & Industrial.
Flowserve 21-175-08 Seal,Pump Shaft - General Purpose. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. & Industrial.
Dayton 1Mda7 Valve, Safety,0-6 Gpm - Fluid Temp. 200 F, Body Material Brass, Wetted Materials Brass, 400 Stainless Steel, Delrin, Inlet Port (In.). 3/8 M, Max. Light Industrial. & Recepticles. Electrical Outlets. and Enclosures. Electrical Boxes.
Flowserve 21-050-04 Seal,Pump Shaft,1/2 In - Zoro Select 5Dta6 21-1/2" X 11-1/2" Open Poly Bags, 1 Mil, Clear, Pk 1000. General Purpose. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. & Industrial.
Flowserve 21-075-98 Seal,Pump Shaft,3/4 In - Olfa A1160b Snap Art Blade,Pk10. Zoro Select N04160.050.0750 Grade 8, 1/2"-20 Hex Head Cap Screw, Black Oxide. General Purpose. Dia.,Tialn,2Fl. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures.
Flowserve 68-062-48 Seal,Pump Shaft,5/8 In - Ge Thhql2130 Miniature Circuit Breaker, 30 A, 120/240V Ac, 2 Pole, Plug In. Olfa A1160b Snap Art Blade,Pk10. Zoro Select N04160.050.0750 Grade 8, 1/2"-20 Hex Head Cap Screw, Black Oxide. General Purpose.
Flowserve 21-125-06 Seal,Pump Shaft - General Purpose. Zoro Select U34181.012.0043 Blind Rivet, Large Flanged Head, 1/8 In Dia., 0.337. Zoro Select U34124.018.6668 Blind Rivet, Large Flanged Head, 3/16 In Dia.. Tough Guy 3Hgw8 Condenser,Dia 5/8,12 24 (F) Thread,L 6.
Flowserve 21-125-13 Seal,Pump Shaft - Ge Thhql2130 Miniature Circuit Breaker, 30 A, 120/240V Ac, 2 Pole, Plug In. Zoro Select N04160.050.0750 Grade 8, 1/2"-20 Hex Head Cap Screw, Black Oxide. General Purpose. & Recepticles. Electrical Outlets.
Flowserve 16-075-03 Seal,Pump Shaft,3/4 In - General Purpose. Zoro Select 4Hur7 Picnic Table,96" W X62" D,Blue. Kennedy 348Xb 34"W Tool Cabinet 8 Drawers, Brown, 20"D X 39"H. Ashcroft 1188S Pressure Gauge, 0 To 100 In Wc, 1/2 In Mnpt, Plastic, Black.
Palmetto Packing 1389 Packing Seal, 5/8 Sq In., 25 Ft - Range (F) -400 to 550, Max. Temp in Steam (F) NR, Max. Shaft Speed (ft/min) 4,300 fpm, pH Range 0 to 14. Parker 4A-Pr4-Vt-B Rotary Plug Valve,1/4 In,Brass,1/4 Turn. Legris 3805 60 18 316 Stainless Steel Male Connector, 3/8 In Tube Size.
Flowserve 16-062-03 Seal,Pump Shaft,5/8 In - Asco 302276 Valve Rebuild Kit,With Instructions. General Purpose. Zoro Select 48Jr87 Lockout Padlock,Kd,Orange,2"H. Durham Mfg 363-95 Pigeonhole Bin Unit, 72 Bins, 33-3/4 X 12 X 42 In. Quickcable 6014-360-025 Hardware Fastener,5/16-18 X 1-1/4In,Pk25.
Flowserve 21-062-152 Seal,Pump Shaft,5/8 In - Norton Abrasives 66261126296 Abrasive Roll,2"W X 150 Ft. L,150G,Brown. Eklind 25570 7 Piece Torx?. Fold-Up Torx?. Key Set, 25570. General Purpose. & Recepticles. Electrical Outlets. Light Industrial.
Flowserve 21-100-04 Seal,Pump Shaft,1 In - Zoro Select U33192.025.0088 Blind Rivet, Countersunk Head, 1/4 In Dia., 0.75 In. General Purpose. Tb Woods Bk30 1/2" To 1-1/2" Quick Detachable Bushed Bore 1 Groove 3.15 In Od. & Recepticles. Electrical Outlets.
Palmetto Packing 1382 Packing Seal, 3/8 Sq In., 5 Ft - Range (F) -400 to 550, Max. Temp in Steam (F) NR, Max. Shaft Speed (ft/min) 3,800 fpm, pH Range 0 to 14. General Purpose. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures.
Palmetto Packing 5000 Packing Seal, 3/8 Sq In., 10 Ft - Range (F) -450 to 650, Max. Temp in Steam (F) 1200, Max. Fill-Rite Fr1211h Fuel Transfer Pump, 12Vdc, 15 Gpm, 1/4 Hp, Cast Iron, 1" Npt. General Purpose. & Recepticles. Electrical Outlets. Light Industrial.
NEW Stainless Steel Shaft Pump 9'' OAL 3/4'' Dia. - Title: NEW Stainless Steel Shaft Pump 9" OAL 3/4" Dia. Model: Does Not Apply. MPN: Does Not Apply. We're down to earth, easy to work with people. PRODUCT INFORMATION Fast Dispatch Service.
U.S. Seal Manufacturing PS-3890 5/8" Pump Shaft Seal - Carbon Primary Rings. Carbon Upgrade. Stainless Steel Springs. Mfg. Part #. You may be asked to provide pictures or to send the incorrect product(s) back to us (at our expense). (starting at the date you received the product).
NEW M05246 Adapter Shaft Pump 6-1/4'' OAL - Title: NEW M05246 Adapter Shaft Pump 6-1/4" OAL. Model: M05246. MPN: M05246. We're down to earth, easy to work with people. Fast Dispatch Service.
NEW Gardner Denver 01760260 0012 (OEM) RING-CARRIER, 13.5'' - Title: NEW Gardner Denver 01760260 0012 (OEM) RING-CARRIER, 13.5". MPN: 01760260 0012. PRODUCT INFORMATION Fast Dispatch Service. We're down to earth, easy to work with people.
NEW 26837-051 Sylp. Bont Assembly - NEW 26837-051 Sylp. Bont Assembly. Title: NEW 26837-051 Sylp. Fast Dispatch Service. We're down to earth, easy to work with people.
Lot of 4 NEW Blind Flange Gaskets 6'' OD x 5/8'' - Title: Lot of 4 NEW Blind Flange Gaskets 6" OD x 5/8". We're down to earth, easy to work with people. Model: Does Not Apply. MPN: Does Not Apply. PRODUCT INFORMATION.
NEW Rotor Vacuum Pump M06098 3'' OAL - Title: NEW Rotor Vacuum Pump M06098 3" OAL. Model: M06098. MPN: M06098. We're down to earth, easy to work with people. Fast Dispatch Service.
NEW Door Gasket RB709 1'' x 1/2'' - Title: NEW Door Gasket RB709 1" x 1/2". Model: RB709. MPN: RB709. Fast Dispatch Service. We're down to earth, easy to work with people.
NEW 1/4'' comp x 10/32'' Elbow Fitting - Title: NEW 1/4" comp x 10/32" Elbow Fitting. Fast Dispatch Service. We're down to earth, easy to work with people.
NEW Nut Capper 8mm Dia x 1.25mm - Title: NEW Nut Capper 8mm Dia x 1.25mm. Fast Dispatch Service. We're down to earth, easy to work with people.
NEW Pall Filter Housing Gasket 4-1/4'' OD - Title: NEW Pall Filter Housing Gasket 4-1/4" OD. Model: Does Not Apply. MPN: Does Not Apply. We're down to earth, easy to work with people.
NEW 525666 Stator Intake 4-1/2'' OD - Title: NEW 525666 Stator Intake 4-1/2" OD. Model: 525666. MPN: 525666. Fast Dispatch Service. We're down to earth, easy to work with people.
NEW Stem Valve M03308 14-3/4'' OAL - Title: NEW Stem Valve M03308 14-3/4" OAL. MPN: Does Not Apply. Fast Dispatch Service. We're down to earth, easy to work with people.
NEW EG&G SEALOL 4350 Seal Kit - Title: NEW EG&G SEALOL 4350 Seal Kit. Model: 4350. Fast Dispatch Service. We're down to earth, easy to work with people.
Ps-200 Seals - (2-Pack) By Liberty Seals - An American Company - Buna Secondary Seals. Hayward ® SPX1250Z2 Cast Iron Hayward ® SPX2700SA Max-FloTM II Jacuzzi ® 10-0002-06-R Cygnet-Pirahna. Mating Ring Bore1.25". Mating Ring Thickness0.406". Pac Fab 200. Baker Hydro 35B1178.
NEW 7'' Teflon Diaphragm Gasket Seal - Title: NEW 7" Teflon Diaphragm Gasket Seal. Fast Dispatch Service. We're down to earth, easy to work with people.
NEW M04407 GC-16-01A Pump Diaphragm - Title: NEW M04407 GC-16-01A Pump Diaphragm. MPN: M04407. We're down to earth, easy to work with people. PRODUCT INFORMATION Fast Dispatch Service.
NEW M01600-GL-12-06C Pump Diaphragm 5'' OD - Title: NEW M01600-GL-12-06C Pump Diaphragm 5" OD. We're down to earth, easy to work with people. PRODUCT INFORMATION Fast Dispatch Service.
NEW M08256-DS-05-04B Piston Assembly 6-3/4'' OAL - Title: NEW M08256-DS-05-04B Piston Assembly 6-3/4" OAL. MPN: M08256-DS-05-04B. Fast Dispatch Service. We're down to earth, easy to work with people.
John Crane C826250180550 Balanced Cartridge Seal Repair Kit -NIB - Has a way to unload the pallet/item or if we need to arrange for a lift. (DOA, not working properly etc. We are more than happy to rectify any. • Local pick up. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY. ).
Mechanical Water Pump Seal AR 40MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 32MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 35MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 28MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 30MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 26MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 25MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 22MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 24MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 20MM Blower Diving Spring Carbon SiC TC Ring 42MM - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 20MM Blower Diving Spring Carbon SiC TC Ring 45MM - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 19MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 18MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 17MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 16MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 15MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 14MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 13MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 12MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 11MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 10MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 30MM Rotary Ring TiC Carbon 45MM Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 25MM Rotary Ring TiC Carbon 44MM Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving WIN 1" 25.4MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 11MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving TS155 R3 38MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 15 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 18MM TS560A Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 12MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving TS155 R3 35MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 15 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 22MM TS560A Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 20MM Blower Diving Spring Carbon SiC TC Ring 42MM - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving TS155 R3 40MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 15 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 28MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 32MM TS560A Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 10MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 25MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 1 7/8" TS560A Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 14MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 13MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 1 3/8" Rotary Ring Carbon 51MM Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 25MM Rotary Ring Carbon 45.5MM Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 32MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 1 1/4" 31.75MM TiC Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 30MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 26MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 24MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 18MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 16MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 35MM TS560A Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving TS155 R3 30MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 15 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 24MM TS560A Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving TS155 R3 32MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 15 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 35MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 19MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 15MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 15MM TS560A Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 20MM Blower Diving Spring Carbon SiC TC Ring 45MM - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 30MM Rotary Ring TiC Carbon 50MM Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 40MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 22MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal AR 17MM Blower Diving Ring Carbon TC Spring Cermaic - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 0.6MPa, Speed: less or equal 10 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving TS155 R3 10MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 15 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving TS155 R3 11MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 15 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 2" 50.8MM Rotary Ring TiC Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 28MM TS560A Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 7/8" 0.875" Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving TS155 R3 17MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 15 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving TS155 R3 13MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 15 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving TS155 R3 24MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 15 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 5/8" TS560A Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 1 5/8" 1.625" Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 38MM 1 1/2" Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving TS155 R3 25MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 15 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 1 1/8" 1.125" Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving TS155 R3 12MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 15 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 20MM TS560A Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 19MM TS560A Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving TS155 R3 22MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 15 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving TS155 R3 20MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 15 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving TS155 R3 15MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 15 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving 14MM TS560A Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 12 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving TS155 R3 18MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 15 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving TS155 R3 16MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 15 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving TS155 R3 19MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 15 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Mechanical Water Pump Seal Blower Diving TS155 R3 14MM Rotary Ring Carbon Spring - Rotary Ring(Plastic Carbon/Carbon/Sic/tc), Stationary Ring(Ceramic/Sic/Tc), Secondary Seal(nbr/Epdm/VITON), Spring & Other Parts(Sus304/Sus316). Pressure: less or equal 1MPa, Speed: less or equal 15 m/s, Temperature: -30 degree celsius to +200 degree celsius.
Cornell BME175A-A00 Pump Seal Kit NWB - Check-Out Now! Warranty Policy. Due to the multiple quantities available, you may not receive the item pictured in the ad above.
Zoro Select 4Pkg7 V-Ring Seal,Stretch,Blk,81Mm Id - V-Ring Seal, Inside Dia. 3.189 in, Width 0.236 in, Height 0.433 in, Temp. Range -20 Degrees to 230 Degrees F, Seal Material Buna N, Seal Durometer 60 Shore A, Color Black.
Little Giant 928002, Seal Ring, 4.718 X .078 - Little Giant 928002, Seal Ring, 4.718 X .078, for use with Pump Model 6EN-CIA-SFS, 6EN-CIM, 6EN-CIA-RF, 9EN-CIA-SFS, 9ENH-CIA-SFS, 9SN-CIA-SFS, 10EN-CIA-SFS, 10EN-CIM, 10EN-CIA-RF, 10EN-CBA, 10EN-CBA-SFS, 10ENH-CIA-SFS, 10SN-CIA-SFS, 5.5-ASP, Series 6EN, 9EN, 9ENH, 9SN, 10EN, 10ENH, 10SN, 5.5.
Little Giant 928039, Seal Ring, 7.928 X .078 - Little Giant 928039, Seal Ring, 7.928 X .078, for use with Pump Model 6EN-CIA-SFS, 6EN-CIM, 6EN-CIA-RF, 10EN-CIA-SFS, 10EN-CIM, 10EN-CIA-RF, 10EN-CBA, 10EN-CBA-SFS, Series 6EN, 10EN.
Zoeller 31-1935, Simplex Polyethylene Basin (24" x 24") with 4" Inlet Pipe Seal - Zoeller Simplex Polyethylene Sewage Basin. 4" stub out inlet (connection is molded into the basin). Barrel basin. Basins are not designed to be installed where saturated soil hydrostatic pressure extends above the top of the pit unless the pressure is relieved by an independent drainage system.
Zoeller 31-0158, Simplex Polyethylene Sewage Basin with 4" Pipe Seal Inlet Hub - Zoeller Simplex Polyethylene Sewage Basin. Includes a 4" pipe seal inlet hub. Basins are not designed to be installed where saturated soil hydrostatic pressure extends above the top of the pit unless the pressure is relieved by an independent drainage system.
Bell & Gossett 118680LF Seal Assembly, Lead Free - For use with: Bell & Gosset Series 100, HV, 2", PR, 2-1/2", LD-3, HD-3, PD-35, PD-37, 60 "AA", 1522, Obs. 1", Obs. 1-1/4", Obs. 1-1/2", Obs. 2", Obs. HV, MF 60 with 5-1/4" x 6-1/4" impellers. Seal less seat insert.
Zoeller 4270-0004 Waste-Mate Double Seal Sewage Pump, 1 HP, 230 V, 1 Ph,7.5 Amps - This durable cast iron pump includes a powder-coated epoxy finish to prevent corrosion and is designed to provide great heat dissipation from the motor, ensuring a long service life. For unusual conditions, a reserve safety factor is engineered into the design of every Zoeller pump.
Palmetto Packing 1613 Flaxim Packing Seal, 1/4Sq In., 25ft - Palmetto Packing 1613 Packing Seal, 1/4Sq In., 25 Ft Flaxim. Condition is "New". Please check Data on Palmetto web site before buying What you get is what you see in the pictures NO RETURNS thank you
Dayton Pp2115250-05G Capacitor - Capacitor, For Use With Grainger Item Number 2JGA6. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
Dayton Pp5621011g Shaft Seal - General Purpose. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. & Industrial.
Taco 110-251Sf-1 Flange Kit, Pipe Size 3/4 In. Npt,Ss,Pk2 - TACO 110-251SF-1 Flange Kit, Pipe Size 3/4 In. NPT,SS,PK2. Zoro Select U22080.062.0425 Fully Threaded Stud, 5/8"-11, 4 1/4 In, Steel. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures.
Flowserve 21-137-04 Seal,Pump Shaft - Zoro Select 4Wrd7 Test Lead Kit. General Purpose. Zoro Select Za0250-Al28 Standoff Cap,Rnd,Al,3/4 Dx1/2,Pk2. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes.
Flowserve 16-100-03 Seal,Pump Shaft - Bradley S19-270Bl Deck Mounted Eyewash Station No Bowl. General Purpose. Zoro Select 600U111sw010 1" Socket Weld 316 Ss Union. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes.
Snyder Industries 5680000N97206 Storage Tank,Vertical Closed Top,60 Gal. - SNYDER INDUSTRIES. Simple Green 0600000119055 Liquid 55 Gal. Cleaner And Degreaser, Drum. Te-Co 40950 Double-End Threaded Stud, 3/4"-10 Thread To 3/4"-10 Thread, 3 In. Zoro Select 4Kca4 Evaporative Cooling Pad,12X6x72 In.
Palmetto Packing 1389 Packing Seal, 3/16 Sq In., 5 Ft - Compression Packing Seal, Waste/Water Treatment, Chemical, General Service, For Use In - Packing Seals Pumps, Square (In.) 3/16 in, Length 5 ft, 100 Percent GFO(TM) Expanded PTFE with Graphite, Lubrication - Packing Seals Yes, Max. Pressure for Pumps (PSI) 300, Max. Pressure for Valves (PSI) NR, Ambient Temp. Range (F) -400 to 550, Max. Temp in Steam (F) NR, Max. Shaft Speed (ft/min) 4,300, pH Range 0 to 14.
Flowserve 21-112-04 Seal,Pump Shaft - General Purpose. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. & Industrial.
Flowserve 51-225-05 Seal,Pump Shaft - S & W Bsnylb26-El Level Mount,Swivel Stud,1/2-13,2In Base. General Purpose. Zoro Select 1Lae3 1/4-20X5/16 Weld Nut Project.750 Rd Plain. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures.
Palmetto Packing 1347Af Packing Seal, 1/2 Sq In., 10 Ft - Compression Packing Seal, Waste/Water Treatment, General Service, For Use In - Packing Seals Pumps, Valves, Square (In.) 1/2 in, Length 10 ft, Acrylic/PTFE, Lubrication - Packing Seals Yes, Max. Pressure for Pumps (PSI) 300, Max. Pressure for Valves (PSI) NR, Petrolatum External Coating - Packing Seals, White Color, Ambient Temp. Range (F) -10 to 450, Max. Temp in Steam (F) NR, Max. Shaft Speed (ft/min) 2,300, pH Range 2 to 12, Features Inexpensive White Acryllic Packing.
Palmetto Packing 1367H Packing Seal, 1/2 Sq In., 5 Ft - Compression Packing Seal, Food/Pharmaceutical, Potable Water, For Use In - Packing Seals Valves, Square (In.) 1/2 in, Length 5 ft, PTFE, Lubrication - Packing Seals No, Max. Pressure for Pumps (PSI) NR, Max. Pressure for Valves (PSI) 2000, White Color, Ambient Temp. Range (F) -400 to 500, Max. Temp in Steam (F) NR, Max. Shaft Speed (ft/min) 1,200, pH Range 0 to 14, Features Contains No Lubrication, Good for High Pressure Chemical Service, Application Industry Standard for Non-Steam Valves.
Palmetto Packing 1347Af Packing Seal, 5/16 Sq In., 10 Ft - Compression Packing Seal, Waste/Water Treatment, General Service, For Use In - Packing Seals Pumps, Valves, Square (In.) 5/16 in, Length 10 ft, Acrylic/PTFE, Lubrication - Packing Seals Yes, Max. Pressure for Pumps (PSI) 300, Max. Pressure for Valves (PSI) NR, Petrolatum External Coating - Packing Seals, White Color, Ambient Temp. Range (F) -10 to 450, Max. Temp in Steam (F) NR, Max. Shaft Speed (ft/min) 2,300, pH Range 2 to 12, Features Inexpensive White Acryllic Packing.
Palmetto Packing 1382 Packing Seal, 5/8 Sq In., 25 Ft - Compression Packing Seal, Waste/Water Treatment, Chemical, General Service, For Use In - Packing Seals Pumps, Square (In.) 5/8 in, Length 25 ft, Expanded PTFE with Graphite, Lubrication - Packing Seals Yes, Max. Pressure for Pumps (PSI) 300, Max. Pressure for Valves (PSI) NR, Dull Black Color, Ambient Temp. Range (F) -400 to 550, Max. Temp in Steam (F) NR, Max. Shaft Speed (ft/min) 3,800, pH Range 0 to 14.
Palmetto Packing 5000 Packing Seal, 3/16 Sq In., 25 Ft - Compression Packing Seal, Power Generation, For Use In - Packing Seals Pumps, Valves, Square (In.) 3/16 in, Length 25 ft, Flexible Graphite, Lubrication - Packing Seals Yes, Max. Pressure for Pumps (PSI) 250, Max. Pressure for Valves (PSI) 2500, Shiny Gray Color, Ambient Temp. Range (F) -450 to 650, Max. Temp in Steam (F) 1200, Max. Shaft Speed (ft/min) 4,000, pH Range 0 to 14, Features High Temperature Packing That Can Be Used In Pumps and Steam Valves.
Flowserve 4R11684YI Rotary Face Pump Seal-NIB - Has a way to unload the pallet/item or if we need to arrange for a lift. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY. • Freight, etc.
FALK 1015G GV20/52 Gear Coupling Sleeve -NIB - WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY. (DOA, not working properly etc. We are more than happy to rectify any. If your item is received in a different condition than stated. has a way to unload the pallet/item or if we need to arrange for a lift. ).
Flowserve 3R22046YY-01 Seal 3R20222DB -NIB - WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY. (DOA, not working properly etc. We are more than happy to rectify any. If your item is received in a different condition than stated. has a way to unload the pallet/item or if we need to arrange for a lift. ).
Miller Fluid Power 051-KR015-138, ROD GLAND KIT, 1-3/8'', BOLTED - Title: Miller Fluid Power 051-KR015-138, ROD GLAND KIT, 1-3/8", BOLTED. Miller 051-KR015-138, ROD GLAND KIT, 1-3/8", BOLTED. PRODUCT INFORMATION We're down to earth, easy to work with people.
U.S. Seal Manufacturing PS-800 5/8" Pump Seal - Seal Size5/8". Mfg. Part #. You may be asked to provide pictures or to send the incorrect product(s) back to us (at our expense). (starting at the date you received the product). 1.156" Bore. NotesSpring Holder Not Included.
U.S. Seal Manufacturing PS-235 1" Pump Seal - Bell & Gossett. Seal Size1". Carbon Primary Rings. BSM Pump Corp. Hydromatic Pump CoHPLX200 3000001. Price Pump Co. Roper Pump Co. Franklin Pump Systems.
Burgmann Industries GmbH AX25DC-030 Seal Kit - It is not tested. The photos provided are of the actual item. You will only receive what is actually shown in the photos. Therefore, we are not familiar with all the parts or accessories that would be included from the manufacturer.
U.S. Seal Manufacturing PS-701 5/8" Pump / Spa Shaft Seal - Seal Size5/8". Buna Secondary Seal. Temperature Range-40° to +400°F. VIC Cleaning Machine. Stainless Steel Springs. You may be asked to provide pictures or to send the incorrect product(s) back to us (at our expense).
NEW 1/4'' 1000 WOG CF8M Valve Assembly - Title: NEW 1/4" 1000 WOG CF8M Valve Assembly. Model: CF8M. Fast Dispatch Service. We're down to earth, easy to work with people.
Mechanical Shaft Seal Replacement for Pool Spa Pump 108-16 - Specifications:Seal Size:Height: 27mm / 1.06-inchInner Diameter: 16.7mm / 0.66-inchOuter Diameter(Max.): 26.6mm / 1.05-inch Ring Size:Inner Diameter: 16.5mm / 0.65-inchOutter Diameter: 27.3mm / 1.07-inchHeight: 5.6mm / 0.22-inch Model: 108-16Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C) Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures. .
Smc, Air Filter ,Al50-No6-3Z - SMC, AIR FILTER. MODULAR AIR FILTER. IMPROVED WATER SEPERATION EFFIENCY EXTENDS SERVICE LIFE. APPROXIMATE WEIGHT: 4 LBS.
Smc, Air Filter ,Af40-No3-2-X64 - SMC, AIR FILTER. MODULAR AIR FILTER. IMPROVED WATER SEPERATION EFFIENCY EXTENDS SERVICE LIFE. APPROXIMATE WEIGHT: 2 LBS. YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE.
CHESTERTON 123 Cartridge PN-048041 SELF ALIGHNING Single Seal -26, 3.250, CB/TP - PN: 048041. The seal is still in plastic and in NEW Condition. SELF ALIGNING SEAL. Seal: -26. zip code . you may choose at check out. Baltimore and surrounding areas since 1996. But with our eyes now open we put a lot of effort in bringing you high end industrial and electrical parts as well.
CHESTERTON 123 Cartridge PN-048041 SELF ALIGHNING Single Seal -26, 3.250, CB/TP - PN: 048041. SELF ALIGNING SEAL. Seal: -26. zip code . you may choose at check out. Baltimore and surrounding areas since 1996. But with our eyes now open we put a lot of effort in bringing you high end industrial and electrical parts as well.
NEW MB10A01MAZZ Belleville Spring 1-1/16'' , INC718/HT - Title: NEW MB10A01MAZZ Belleville Spring 1-1/16", INC718/HT. Model: MB10A01MAZZ. MPN: MB10A01MAZZ. Fast Dispatch Service. We're down to earth, easy to work with people.
NEW U10HA01F1KA Seat STD 1'' HP F22/QPQ - Title: NEW U10HA01F1KA Seat STD 1" HP F22/QPQ. Model: U10HA01F1KA. MPN: U10HA01F1KA. We're down to earth, easy to work with people. Fast Dispatch Service.
NEW SPX V286660 Valve Gasket 3-1/4'' OD x 2-3/4'' ID - Title: NEW SPX V286660 Valve Gasket 3-1/4" OD x 2-3/4" ID. Model: V286660. MPN: V286660. Fast Dispatch Service. We're down to earth, easy to work with people.
45mm Flygt replacement plug-in seal for pump model:3171, 4650, 4660, 5100.250 - Now, we, Headquartered in Beijing, have three modern factories in China. Q:I do not have drawing or picture available for custom products, Could you design it ?. P/N of seal :619 64 30/619 64 31. Q:I can not find our products in your website, Can you make customized products for us.
NEW SPX V387160 Cage Spacer 1-3/8'' Bore - Title: NEW SPX V387160 Cage Spacer 1-3/8" Bore. Model: V387160. MPN: V387160. Fast Dispatch Service. We're down to earth, easy to work with people.
NEW Chesterton 035211 Seal - Title: NEW Chesterton 035211 Seal. Model: 035211. MPN: 035211. Fast Dispatch Service. We're down to earth, easy to work with people.
Lot of 3 NEW Ruhrpumpen 20W1652 Wear Ring - Model: 20W1652. MPN: 20W1652. Unused does have surface rust as shown. We're down to earth, easy to work with people. PRODUCT INFORMATION.
NEW GE A16Y1C2 000.37D Turbine Packing - Model: A16Y1C2 000.37D. MPN: A16Y1C2 000.37D. We're down to earth, easy to work with people. Fast Dispatch Service.
NEW Flowserve 00718.C2M.000 O-Ring #331 ECO 15655 Rubber - NEW Flowserve 00718. C2M.000 O-Ring #331 ECO 15655 Rubber. Title: NEW Flowserve 00718. Model: 00718. MPN: 00718. Fast Dispatch Service. We're down to earth, easy to work with people.
NEW 74476490 Nozzle Turbine - Title: NEW 74476490 Nozzle Turbine. Model: 74476490. MPN: 74476490. Fast Dispatch Service. We're down to earth, easy to work with people.
NEW Milton Roy 106780 Pump Head 6-3/4'' OD - Title: NEW Milton Roy 106780 Pump Head 6-3/4" OD. Model: 106780. MPN: 106780. We're down to earth, easy to work with people. PRODUCT INFORMATION.
Milton Roy 106780 Pump Head 6-3/4'' OD - Title: Milton Roy 106780 Pump Head 6-3/4" OD. Model: 106780. MPN: 106780. We're down to earth, easy to work with people. PRODUCT INFORMATION.
Griffco Valve Kit, Item Number RK002 - When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact.
NEW GE 204-29-1059 Turbine Sleeve Bearing LO-3 Shaft GR. Grade AC-236 - NEW GE 204-29-1059 Turbine Sleeve Bearing LO-3 Shaft GR. Grade AC-236. Title: NEW GE 204-29-1059 Turbine Sleeve Bearing LO-3 Shaft GR. Quality Products at Lowest Prices. Fast Dispatch Service. We're down to earth, easy to work with people.
Lot of 6 NEW GE 231-11-1028 Gasket - Title: Lot of 6 NEW GE 231-11-1028 Gasket. We're down to earth, easy to work with people. PRODUCT INFORMATION.
NEW Goulds 4K11 - Impeller Key - 3656 S - Title: NEW Goulds 4K11 - Impeller Key - 3656 S. Model: 4K11. Fast Dispatch Service. We're down to earth, easy to work with people.
NEW MPW Emerson Process Valve Plug 1L343735162 3/4-1 - Model: 1L343735162. MPN: 1L343735162. Valve Plug, 316SS, 3/4"-1" Type 98H. We're down to earth, easy to work with people. PRODUCT INFORMATION Fast Dispatch Service.
JOHN CRANE Primary Ring TYPE: 9, 3.50 in, Mat: 7510, A935000447510 (NEW in BOX) - PN: A935000447510. JOHN CRANE. We can not get an accurate freight quote without out all this information. PRIMARY RING. Baltimore and surrounding areas since 1996. But with our eyes now open we put a lot of effort in bringing you high end industrial and electrical parts as well.
NEW Fabory 1KML5 O-Ring Kit - 5 Pieces - Title: NEW Fabory 1KML5 O-Ring Kit - 5 Pieces. Model: 1KML5. MPN: 1KML5. Fast Dispatch Service. We're down to earth, easy to work with people.
John Crane A822501829051 Primary Ring - Make sure the item is the correct one, and it will work for your particular application. Exceptions can be made at our discretion.
(2) John Crane D-1000-998 Seal Assemblies - 2" OD, 1" ID. Make sure the item is the correct one, and it will work for your particular application. Exceptions can be made at our discretion. VALUES WILL NOT BE LOWERED ON CUSTOM FORMS OR MARKED AS GIFTS.
60mm Flygt replacement plug in seal for pump 3202, 4670, 4680, 5100.300, 5100.31 - Now, we, Headquartered in Beijing, have three modern factories in China. Shaft size:60mm. Q:I can not find our products in your website, Can you make customized products for us. Q:I do not have drawing or picture available for custom products, Could you design it ?.
Capp Usa Capp-41-173A Dial Assembly Kit - The item you receive may be different from the actual item in the photo in the case of multiple quantity lots. Inventory Location : MP 32-3.
NEW AP Services, Part: 1000055754, Gaskets - Title: NEW AP Services, Part: 1000055754, Gaskets. Model: 1000055754. MPN: 1000055754. We're down to earth, easy to work with people. Fast Dispatch Service.
U.s. Seal Ps-299 Mechanical Seal Shaft Od:.625 - Mfg: U.S. SEAL. 2015 Federal Regional Standards for Heating and Cooling Products. IMPORTANT: IF YOUR ITEM IS A LARGE ITEM AND IS MARKED AS GOING FREIGHT. World’s Largest Distributor of Excess Air Conditioning.
Vulcan VSF37080 Seal TYPE 06S T.C./T.C./VIT Replaces US Seal VGF37080 - Vulcan VSF37080. Seal TYPE 06S T.C./T.C./VIT Replaces US Seal VGF37080. We will make every attempt possible to resolve the issue if we made a mistake, (It happens). If the item up for sale is tested, we will state so clearly.
5/8" Pump Shaft Seal & Stationary .625" SIC/SIC/VIT/304SS Vulcan VS7547 - .625" SIC/SIC/VIT/304SS VS7547. 5/8" Pump Shaft Seal & Stationary. We will make every attempt possible to resolve the issue if we made a mistake, (It happens). If the item up for sale is tested, we will state so clearly.
Vulcan VSF33060 60MM Seal & Stationary TC/TC/VIT - Vulcan VSF33060 60MM. Seal & Stationary TC/TC/VIT. We will make every attempt possible to resolve the issue if we made a mistake, (It happens). If the item up for sale is tested, we will state so clearly.
2-1/4" SEAL 2.25" CAR/CER/BUNA/304SS Pump Shaft Seal & Stationary Vulcan VS323 - Pump Shaft Seal & Stationary Vulcan VS323. 2-1/4" SEAL 2.25" CAR/CER/BUNA/304SS. Let us know when you're coming so we can get your item ready. We will make every attempt possible to resolve the issue if we made a mistake, (It happens).
Vulcan VSF36090 90MM Seal TC/TC/NIT FLYGT Replacement - Vulcan VSF36090. We will make every attempt possible to resolve the issue if we made a mistake, (It happens). If the item up for sale is tested, we will state so clearly.
2-1/4" Pump Shaft Seal & Stationary 2.25" CAR/CER/NITRILE/304SS Vulcan VS1679 TY - 2.25" CAR/CER/NITRILE/304SS Vulcan VS1679 TYPE U11. 2-1/4" Pump Shaft Seal & Stationary. Let us know when you're coming so we can get your item ready. We will make every attempt possible to resolve the issue if we made a mistake, (It happens).
Vulcan VSF29045 45MM TYPE 06O Rotary & Seat T.C./T.C./VIT - Vulcan VSF29045. 45MM TYPE 06O Rotary & Seat T.C./T.C./VIT. We will make every attempt possible to resolve the issue if we made a mistake, (It happens). If the item up for sale is tested, we will state so clearly.
2-1/4" Pump Shaft Seal & Stationary 2.25" CAR/NI-RES/BUNA/304SS Vulcan VS1676 - 2.25" CAR/NI-RES/BUNA/304SS Vulcan VS1676. 2-1/4" Pump Shaft Seal & Stationary. We will make every attempt possible to resolve the issue if we made a mistake, (It happens). If the item up for sale is tested, we will state so clearly.
2-3/8" Pump Shaft Seal & Stationary 2.375" CAR/CER/NITRLE/304SS Vulcan VS268-CMS - 2.375" CAR/CER/NITRLE/304SS Vulcan VS268-CMS Type U11. 2-3/8" Pump Shaft Seal & Stationary. Let us know when you're coming so we can get your item ready. We will make every attempt possible to resolve the issue if we made a mistake, (It happens).
45MM Pump Shaft Rotary & Seat TYPE 06O CAR/T.C./BUNA M3 VSF28045 - TYPE 06O CAR/T. C./BUNA M3 VSF28045. 45MM Pump Shaft Rotary & Seat. We will make every attempt possible to resolve the issue if we made a mistake, (It happens). If the item up for sale is tested, we will state so clearly.
1-7/8" Pump Shaft Seal & Stationary 1.875" CAR/CER/NITRILE/304SS VS340 - 1.875" CAR/CER/NITRILE/304SS VS340. 1-7/8" Pump Shaft Seal & Stationary. Let us know when you're coming so we can get your item ready. We will make every attempt possible to resolve the issue if we made a mistake, (It happens).
1-7/8" Pump Shaft Seal & Stationary 1.875" CAR/CER/BUNA/304SS VS2069 - 1.875" CAR/CER/BUNA/304SS VS2069. 1-7/8" Pump Shaft Seal & Stationary. Let us know when you're coming so we can get your item ready. We will make every attempt possible to resolve the issue if we made a mistake, (It happens).
2" TYPE AS Pump Shaft Seal & Stationary CARB/CER/NIT VS479 - CARB/CER/NIT VS479. 2" TYPE AS Pump Shaft Seal & Stationary. We will make every attempt possible to resolve the issue if we made a mistake, (It happens). If the item up for sale is tested, we will state so clearly.
1-3/4" Pump Shaft Seal & Stationary 1.75" Type U11 CAR/NITRLE/304SS VS446 - 1.75" Type U11 CAR/NITRLE/304SS VS446. 1-3/4" Pump Shaft Seal & Stationary. We will make every attempt possible to resolve the issue if we made a mistake, (It happens). If the item up for sale is tested, we will state so clearly.
Vulcan VS268 2.375" Seal 2-3/8 CAR/CER/BUNA/304SS Seal & Stationary - Vulcan VS268. 2.375" Seal 2-3/8 CAR/CER/BUNA/304SS Seal & Stationary. Let us know when you're coming so we can get your item ready. We will make every attempt possible to resolve the issue if we made a mistake, (It happens).
Pump Shaft Seal 4380262060N 1-1/2 x 2 1/4 x 3.619 - Pump Shaft Seal 4380262060N. We will make every attempt possible to resolve the issue if we made a mistake, (It happens). If the item up for sale is tested, we will state so clearly.
Brass Coupling, Part: 78-P-247, 2'' OD, 1'' ID - Brass Coupling, Part: 78-P-247, 2" OD, 1" ID. Title: Brass Coupling, Part: 78-P-247, 2" OD, 1" ID. We're down to earth, easy to work with people. Fast Dispatch Service.
HP, Chemical Feed Pump, Handel, 2H - Title: HP, Chemical Feed Pump, Handel, 2H. We're down to earth, easy to work with people. PRODUCT INFORMATION Fast Dispatch Service.
New, Fisher, 1D348306992, O-Ring - Title: NEW, FISHER, 1D348306992, O-RING. Model: 1D348306992. MPN: 1D348306992. Fast Dispatch Service. We're down to earth, easy to work with people.
NEW John Crane Inc. Part: 1920 3-3/4'' Type 1-A Spring Stainless Steel - NEW John Crane Inc. Part: 1920 3-3/4" Type 1-A Spring Stainless Steel. Title: NEW John Crane Inc. Part: 1920 3-3/4" Type 1-A Spring Stainless Steel. Model: 1920. We're down to earth, easy to work with people.
NEW, Fisher, 16a6903x012, O-Ring - Title: NEW, Fisher, 16a6903x012, O-Ring. Model: 16a6903x012. MPN: 16a6903x012. Fast Dispatch Service. We're down to earth, easy to work with people.
35mm plug-in seal for Flygt pump 2670, 3153,5100.210, 5100.211,Aluminium Version - Now, we, Headquartered in Beijing, have three modern factories in China. P/N of seal. Shaft size:35mm. Q:I can not find our products in your website, Can you make customized products for us. Q:I do not have drawing or picture available for custom products, Could you design it ?.
25mm Flygt replacement plug in seal - for Flygt pump model :2660.180,4630,4640 - Now, we, Headquartered in Beijing, have three modern factories in China. Q:I do not have drawing or picture available for custom products, Could you design it ?. Q:I can not find our products in your website, Can you make customized products for us.
Flygt replacement plug in seal -For Flygt pump model: 2610/2620/2630/2640/461 - Now, we, Headquartered in Beijing, have three modern factories in China. Q:I do not have drawing or picture available for custom products, Could you design it ?. Q:I can not find our products in your website, Can you make customized products for us.
XJ/104 12mm-30mm Inner Dia Mechanical Shaft Seal Replacement for Pool Spa Pump - Specifications:Model: XJ / 104Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C)Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures.
2pc XJ/104 12-30mm Inner Dia Mechanical Shaft Seal Replacement for Pool Spa Pump - Specifications:Model: XJ / 104Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C)Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures.
3pc 104/XJ 12-25mm Inner Dia Mechanical Shaft Seal Replacement for Pool Spa Pump - Specifications:Model: 104 / XJPressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C)Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures.
2pcs 12mm-25mm Inner Dia Mechanical Shaft Seal Replacement for Pool Spa Pump - Specifications:Model: 103 / 202 / 301Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C)Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures.
3pcs 108 8mm-30mm Inner Dia Mechanical Shaft Seal Replacement for Pool Spa Pump - Specifications:Model: 108Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C)Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures.
3pcs 10mm-25mm Inner Dia Mechanical Shaft Seal Replacement for Pool Spa Pump - Specifications:Model: 103 / 202 / 301Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C)Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures.
New Alfa Laval 5381.305 Joint Ring Epdm Usp Vi Sx3 Elastomer - Be sure to see our full inventory of Rosemount, MicroMotion, Yokogawa, Allen-Bradley, Endress Hauser, etc. All products are sold without an existing warranty. UNLESS OTHERWISE STATED.
Mechanical Shaft Seal Replacement 22.3mm ID for Pool Spa Pump 202-20 - Specifications:Seal Size:Height: 40.8mm / 1.61-inchInner Diameter: 20.8mm / 0.82-inchOuter Diameter(Max.): 32.9mm / 1.3-inch Ring Size:Inner Diameter: 22.3mm / 0.88-inchOutter Diameter: 36.4mm / 1.43-inchHeight: 7.3mm / 0.29-inch Model: 202-20Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C) Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures. .
Mechanical Shaft Seal Replacement for Pool Spa Pump 104-30 - Specifications:Seal Size:Height: 34mm / 1.34-inchInner Diameter: 30.8mm / 1.21-inchOuter Diameter(Max.): 45.2mm / 1.78-inch Ring Size:Inner Diameter: 31mm / 1.22-inchOutter Diameter: 46mm / 1.81-inchHeight: 8.3mm / 0.33-inch Model: 104-30Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C) Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures. .
Mechanical Shaft Seal Replacement for Pool Spa Pump 2pcs 301-12 - Specifications:Seal Size:Height: 17.2mm / 0.68-inchInner Diameter: 14.5mm / 0.57-inchOuter Diameter(Max.): 23.9mm / 0.94-inch Ring Size:Inner Diameter: 13mm / 0.51-inchOutter Diameter: 26.3mm / 1.04-inchHeight: 6.6mm / 0.26-inch Model: 301-12Pressure: 0-0.6MpaLine Speed: less than or equal to 8m/sTemperature: -4 degrees F (-20 degrees C) to 176 degrees F (80 degrees C) Description:Mechanical seals for pumps.Includes two seals made of ceramic and graphite.Can work in water, oil, and other weakly corrosive media.It is necessary to prevent aging, cracking, stickiness and loss of elasticity due to high temperatures. .
Wilden 10" Pump Shaft 365 - We apologize in advance for any inconvenience this may cause you. The color of the photo may vary from the actual product due to translation and reproduction limitations of photography. If you are not 100% satisfied.
Parker RK2AHL0301 3-inch Bunan Rod Seal Kit - Unused - Description: Parker RK2AHL0301 3-inch Bunan Rod Seal Kit - NewCondition: Pre-owned, unused.The packaging is clean - and sealed. The item inside is fine - clean, new and unused. There are instructions. There are no accessories. Item dimensions: 23 x 15 x 3 cm (boxed). Item weight: 40 g.
Parker RK2AHL0171 1-3/4-inch Bunan Rod Seal Kit - Unused - The item inside is fine - clean, new and unused. Pre-owned, unused. If the item itself has scuffs or scratches we will clearly state so (but any such wear due to handling is purely superficial and will not interfere with the correct functioning of the device).
Parker RK2AHL0201 2-inch Bunan Rod Seal Kit - Unused - Pre-owned, unused. If the item itself has scuffs or scratches we will clearly state so (but any such wear due to handling is purely superficial and will not interfere with the correct functioning of the device).
Parker RK2AHL0251 Cylinder Service Rod Seal Kit 2-1/2-inch Bunan - Unused - Pre-owned, unused. The last photo shows all of them, to confirm condition. We believe the listed price is a fair valuation. Inventory location - Trays. We don't know how long it was in possession of the original owner.
Flowserve Relacement Mechanical Seals Frame Group 10 Thompson Kelly Lewis Pump - 50 x 32 - 250, 65 x 40 - 250, 65 x 40 - 250, 80 x 50 - 250, 80 x 50 - 315. Fits The Following Pump Models. 100 x 80 -160, 100 x 65 - 200, 100 x 65 - 250, 100 x 65 - 315, 125 x 80 - 250. 125 x 80 - 315, 125 x 80 - 400, 125 x 100 - 200, 125 x 100 - 250, 125 x 100 - 315.
NEW ServTek 5476044 Pump Shaft, 1.248 Dia. x 9.0LG - NEW ServTek 5476044 Pump Shaft, 1.248 Dia. Title: NEW ServTek 5476044 Pump Shaft, 1.248 Dia. Model: 5476044. MPN: 5476044. We're down to earth, easy to work with people.
U.S. Seal Manufacturing PS-800 Pump Seal, 5/8", BMFJF - Seal Size0.625. U.S. Seal Mfg Cross Reference. Teel Pump 1P-849-850-879, 3P547-550, 571-599-648 1P979-984, 2P019-280, PC-18-2PC56 1R307, 5P387, 5P421. Temperature°F to °F. CROSS REFERENCE. Mating Ring Thickness5/16”.
U.S. Seal Manufacturing PS-702 Pump Seal, 5/8", BMFJF - Seal Size0.625. U.S. Seal Mfg Cross Reference. Goulds Pump (ITT Industries) Balanced Flow BF-03 Series G, LD, LS, M, O, XS05, 15, 20, 30, 50 Jetomatic Fig. 3642, 3672, 3742, 10K1, 10K6, 20831100 704705062, 725981062.
U.S. Seal Manufacturing PS-493 5/8" Pump Seal - Seal Size0.625. Carbon rimary Rings. U.S. Seal Mfg Cross Reference. Temperature°F to °F. CROSS REFERENCE. Material CodeBCFKF. Mating Ring Thickness0.288”.
U.S. Seal Manufacturing PS-235 1" Pump Seal, Carbon Upgrade - Carbon Upgrade. Carbon Primary Rings. Bell & Gossett 180011. Seal Size1". BSM Pump Corporation 466-137-1. Temperature°F to °F. CROSS REFERENCE. Franklin Pump Systems (Jacuzzi) 10129906.
Mechalock MJ-25 Mechanical Seal 2006040002 - New - Description: Mechalock MJ-25 Mechanical Seal 2006040002 - New Please note - this is pre-owned, surplus stock purchased at auction and resold. Condition: New, pre-owned, unused. The re is no exterior packaging (i.e., no box). The interior packaging is still sealed. The item inside is a little dusty, but otherwise is clean and unused. There are instructions. There are no accessories.
Mechalock MA-38-60 Mechanical Seal 2005120017 - New - Description: Mechalock MA-38-60 Mechanical Seal 2005120017 - New Please note - this is pre-owned, surplus stock purchased at auction and resold. Condition: New, pre-owned, unused. The packaging is lightly worn and dusty; the box is dented, with tape and labels and handwriting on it. The interior packaging is still sealed. The item inside is a little dusty, but otherwise is clean and unused. There are instructions.
Mechalock MA-65-87 Mechanical Seal 2005120003 - New - Description: Mechalock MA-65-87 Mechanical Seal 2005120003 - New Please note - this is pre-owned, surplus stock purchased at auction and resold. Condition: New, pre-owned, unused. The packaging is lightly worn and dusty; the box is dented, with tape and labels and handwriting on it. The interior packaging is still sealed. The item inside is a little dusty, but otherwise is clean and unused. There are no instructions.
Mechalock MA-24-42 Mechanical Seal 2005120594 - Qty 2 - New - Description: Mechalock MA-24-42 Mechanical Seal 2005120594 - Qty 2 - New Please note - this is pre-owned, surplus stock purchased at auction and resold. Condition: New, pre-owned, unused. The packaging is lightly worn and dusty; the box is dented, with tape and labels and handwriting on it. The packaging is still sealed. The item inside is a little dusty, but otherwise is clean and unused. There are no instructions.
Mechalock MA-16-30 Mechanical Seal - Qty 2 - New - Description: Mechalock MA-16-30 Mechanical Seal - Qty 2 - New Please note - this is pre-owned, surplus stock purchased at auction and resold. Condition: New, pre-owned, unused. There is no exterior packaging (i.e., no box). The interior packaging was never sealed. The item inside is a little dusty, but otherwise is clean and unused. There are no instructions. There are no accessories.
3/4" Onga Astral Pool Pump Mechanical Seal BX/TX/CX/E/CTX/P3 Part Number 75508 - Suitable for the following Onga Pump Models. Fits Onga Centrifugal Pump Models. Astral Hurlcon -- BX - CTX, CX, - E Series, FX,TX, Viron EVO series. This Seal Fits the Following Pump Models. Series SQI-300,SQI-400,SQI-500,SQI-600,SQI-700, SQI Gemini series.
3/4" Pool Pump Shaft Mechanical Seal - Fits the Onga and Davey Pump - Suitable for the following Onga Pump Models. Fits Onga Centrifugal Pump Models. This Seal Fits the Following Pump Models. MC55,MC65-B/SHAFT. OP1,0P1-1,OP10,OP10-1,252,OP2,OP3,SP10,SP10-1,SP25,SP26,SP30,SP50,SP50-1,150,151,152,153.
New Genuine FLOWSERVE Single INSERT RA DURA SEAL 1.00" 144061 316 SS New in Box - INSERT RA DURA SEAL. Baltimore and surrounding areas since 1996. But with our eyes now open we put a lot of effort in bringing you high end industrial and electrical parts as well. We literally have NO idea what we have coming around corner, so make sure you add us to your favorites and check back often.
Genuine New - FLOWSERVE KEPA4500FE3 - DURACHROME SEAL RG - ss316 - NEW in BOX - Baltimore and surrounding areas since 1996. But with our eyes now open we put a lot of effort in bringing you high end industrial and electrical parts as well. We literally have NO idea what we have coming around corner, so make sure you add us to your favorites and check back often.
Genuine New - FLOWSERVE AA3V250P33-6 - TUNGSTEN CARBIDE A INSERT - NEW in BOX - TUNGSTEN CARBON. Baltimore and surrounding areas since 1996. But with our eyes now open we put a lot of effort in bringing you high end industrial and electrical parts as well. We literally have NO idea what we have coming around corner, so make sure you add us to your favorites and check back often.
Poolrite 22230 pump seal Seal, Poolrite Enduro SQI range - Poolrite - Enduro EP-550,EP-750,EP-930,EP-1100,EP-1500. Series SQI-300,SQI-400,SQI-500,SQI-600,SQI-700, SQI Gemini series. This Seal Fits the Following Pump Models. Suitable for the following Onga Pump Models.
YORK - (NEW) - SHAFT SEAL ASSEMBLY - PN: 015 02358 017, 01502358017 - NEW in BOX - SHAFT SEAL ASSEMBLY. Baltimore and surrounding areas since 1996. But with our eyes now open we put a lot of effort in bringing you high end industrial and electrical parts as well. We literally have NO idea what we have coming around corner, so make sure you add us to your favorites and check back often.
AstralPool Hurlcon 75508 Pool Pump Mechanical seal. BX, CTX,CX, FX - Astrol Hurlcon - BX, CTX, CX, E Series, FX, Viron EVO Series. Astral Hurlcon - BX, CTX, CX, E Series, FX,TX, Viron EVO Series. Carbon - Ceramic. Hayward, Monarch. Spa-Quip, Questa. Stroud, Quiptron.
Onga Pantera PPP750 Pool Pump Mechanical Seal - Fits Pantera PPP1100 & PPP1500 - Suitable for the following Onga Pump Models. Fits Onga Centrifugal Pump Models. This Seal Fits the Following Pump Models. 140,141,142,142-1,143,146,MC15,MC25,MC27,MC35,MC45. 122,MA2,MA20,MA3,MA5,MA50,MA50-1,MA6-HD2/HD2,112,TC16,TC16-1,TC25,TC26,TC27,TC30,TC40,TC46,TC50,TC56.
Onga Shallow Well Jet Pump Seal ONGA Part No 700270 503,504,JJ0,JJ1,JJ10,JJ20 - 503,504,JJ0,JJ1,JJ10. Suitable for the following Onga Pump Models. Fits Onga Centrifugal Pump Models. 140,141,142,142-1,143,146,MC15,MC25,MC27,MC35,MC45. 122,MA2,MA20,MA3,MA5,MA50,MA50-1,MA6-HD2/HD2,112,TC16,TC16-1,TC25,TC26,TC27,TC30,TC40,TC46,TC50,TC56.