100
Rake Tooth 7.75" Tine x 3.625" Tine Gap International Rake Tooth IH22-2
$6.00 Buy It Now or Best Offer
Lot Of 5 Rake Teeth 7.75" Tine x 3.625" Tine Gap International Rake Teeth IH22-2
$25.00 Buy It Now or Best Offer
EF1738001 Bearing Assy Fits John Deere 700 705 Model Hay Rake NOS
$18.00 Buy It Now
EF15458003 Flange End Cap Greasable Fits John Deere 700 And 705 Hay Rake NOS JD
$12.00 Buy It Now
Set of 25 New Rake Teeth Hold Down Clip Fits BUSH HOG, Brush Hog
$23.99 Buy It Now
Hay Tedder Tooth Fits Hesston Galfre GT46S R18030616$24.95$8.73 Buy It Now or Best Offer
Farmer Bob's Parts Tedder Tine Rake Tooth 4-1/2" x 12" 2" Coil$24.95$19.96 Buy It Now or Best Offer
850613BDS Twenty (x20) LH Rubber Hay Rake Teeth 96R23
$145.00 Buy It Now
792493 (25) Rake Tooth Hold Down Clips Fits Ford/New Holland Hay Rakes
$34.99 Buy It Now
Set of Ten Rubber Mount Rake Teeth AE47389 Fits John Deere 74 672 660 652 54 64
$48.99 Buy It Now
10 Rubber Mount Rake Teeth Fits John Deere RMT7 RMT-7 700 74 673 672 AE47389
$48.99 Buy It Now
Set of Twenty Rubber Mount Rake Teeth AE47389 Fits John Deere AE24953 74 672 660
$89.99 Buy It Now
Fifty Rubber Mounted Rake Teeth 1-5/8" Fits JD RMT7 RMT-7 700 673 672 AE47389
$202.99 Buy It Now or Best Offer
(10) Rubber Mounted Rake Teeth AE24953 AE47389 Fits John Deere 650 640 660 662
$47.85 Buy It Now
100 Rubber Mounted Rake Teeth AE24953 Fits John Deere 1-5/8" Yoke x 3/8" Holes
$375.99 Buy It Now or Best Offer
Ten Rubber Mounted Rake Teeth 65609 Fits New Holland 256 Fits John Deere 858A 64
$48.99 Buy It Now
Forty Rubber Mounted Teeth Fits AGCO AUS2888001 Fits Ford 850612 Fits JD AE24953
$175.99 Buy It Now
2 watchers(5) Rubber Mounted Rake Teeth 65609 Fits New Holland 256 Fits John Deere 858A 64
$26.99 Buy It Now
Twenty Five New Rubber Mount Rake Teeth Fits JD RMT7 RMT-7 700 673 672 AE47389
$101.99 Buy It Now or Best Offer
Farm Hand 2117 Double Tine Rake Teeth 5.25" Tines x 4.5" Wide Replaces 2117RH
$18.22 Buy It Now
Set Of 4 Farm Hand 2117 Double Tine Rake Teeth 5.25" Tines x 4.5" Wide USA MADE
$38.00 Buy It Now or Best Offer
850614 Ford New Holland Hay Rake Right Hand Teeth 216 & 258 - Set of 5
$41.99 Buy It Now or Best Offer
Rubber Mounted Rake Tooth 65609 Fits New Holland 256 Fits John Deere 858A 350A
$11.99 Buy It Now
One New Rubber Mount Rake Tooth RMT7 Fits John Deere 896A Fits AGCO R21B AE47389
$11.99 Buy It Now or Best Offer
Twenty-Five Rake Teeth 65609 850612 Fits New Holland 1-5/8" Round Bar Rakes
$80.99 Buy It Now
2 watchers25 Hay Rake Tines AE47389 AE24953 Fits John Deere 350 350A 54 64 640 650 652 660
$80.99 Buy It Now
46993 Fifty Rake Teeth With Clips Nuts & Bolts Fits New Holland 55 56 57 792493
$199.45 Buy It Now
Rake Teeth Clip Hold Down Holder Bracket Fits New Holland 56 256 258 64562
$45.99 Buy It Now or Best Offer
Tooth Rh Tine, Wheel Rake, 17 1/4" X 13" X 5" 3013-8145
$27.62 Buy It Now
250 Rake Teeth 64562 With Hardware Fits NH 792493K Kit Fits Rolabars 260 258 259
$1,128.99 Buy It Now
8 watchersTYPHON Attachment Rake Attachments Tools for Mini Excavators Excavator
$450.00 Buy It Now or Best Offer
46993 Eighty Rake Teeth With Clips Nuts & Bolts Fits New Holland 55 56 57 792493
$330.99 Buy It Now or Best Offer
804-792493 ne-Hundred Rake Teeth Hold Down Clips & Hardware 804-64562 Fits NH
$338.95 Buy It Now
1 watcher100 Pack Hay Rake Teeth w/ Clips & Hardware NE400033 Fits New Idea 402 280744
$338.95 Buy It Now
30 792493K & 64562 Rake Teeth Kit Fits 256 258 259 260 Rolabars 792493
$114.45 Buy It Now
46993 Seventy Five Rake Teeth 64562 Fits Ford 96NH1A Fits New Holland 55 56 57
$155.99 Buy It Now
30 Pack Hay Rake Teeth w/ Clips & Hardware NE400033 Fits New Idea 402 280744
$114.45 Buy It Now
804-792493 Eighty Rake Teeth w/ Clips & Hardware 804-64562 Fits New Holland
$330.99 Buy It Now or Best Offer
5 of Tedder Rake Teeth 15.50" Tine x 3.50" Tine Gap x 2.787" Coil GS-1 Farmer
$69.70 Buy It Now
804-792493 Pack of Fifty Rake Teeth Hold Down Clips & Hardware 804-64562 Fits NH
$199.45 Buy It Now
96NH1A Set of 50 Hay Rake Teeth 3-7/8" x 2-3/8" 64562 Fits New Holland 55 56 57
$99.70 Buy It Now
100 Rake Teeth 804-64562 Fits New Holland S55 Fits New Idea 402 49 400033
$231.99 Buy It Now
TENI2D Set of 75 Hay Rake Teeth 3-7/8" x 2-3/8" Fits New Holland 55 TENH1A
$155.99 Buy It Now
TENI2D Set of 100 Hay Rake Teeth 3-7/8" x 2-3/8" Fits New Holland 55 TENH1A
$231.99 Buy It Now
46993 Fifty (50) Rake Teeth 64562 Fits Ford 96NH1A Fits New Holland 55 56 57 256
$111.99 Buy It Now
64562 (25) Twenty Five New Teeth 46993 Fits New Holland Hay Rake 7" Long 400033
$59.70 Buy It Now
Five New Rake Teeth 804-64562 Fits New Holland S55 Fits New Idea 402 400033
$22.99 Buy It Now
Ten New Rake Teeth 804-64562 Fits New Holland S55 Fits New Idea 402 400033
$31.99 Buy It Now
Twenty New Rake Teeth 804-64562 Fits New Holland S55 Fits New Idea 402 400033
$50.99 Buy It Now
580848M1 LH Rake Teeth Forty Pack Fits Massey Ferguson 25 Fits Gearmore HR-0169
$154.99 Buy It Now
LH Rubber Mounted Rake Tooth 10" Tine x 3/8" Holes x 1.8593" Yoke Opening RMT-3
$21.85 Buy It Now
25 New Left Hand Rake Teeth Fits Massey Ferguson 580848M1 Fits Edcor RTIANHL
$96.99 Buy It Now or Best Offer
HR-0169 Pack of Twenty Five (25) Rubber Rake Teeth Fits Gearmore Rake 2030-G2
$96.99 Buy It Now or Best Offer
Five (5) LH Rubber Mounted Rake Teeth 10" Tine x 3/8" Holes x 1.8593" Yoke RMT-3
$37.85 Buy It Now
Rake Teeth 5 Pc Left Hand Fits New Holland 850613 Fits Massey Ferguson 580848M1
$25.99 Buy It Now
Twenty Left Hand Rake Teeth Fits Sitrex BR2030 Fits Massey Ferguson 580848M91
$79.99 Buy It Now
Twenty Five New LH Rubber Mounted Hay Rake Teeth 850613 Fits New Holland 65668
$96.99 Buy It Now
TEOT1E (1) New Rake Tooth Fits Sitrex Models 3737507, 96OT1
$10.99 Buy It Now
OT-1, TES1E One New Hay Rake Tooth Fits OTMA 96OT1$10.99 Buy It Now
Set of 5 New Baler Teeth Fits Ford, Fits New Holland 1048, 1049, 1065, 1281, 128
$23.99 Buy It Now
Rake Tooth 7.75" Tine x 3.625" Tine Gap x 1-13/16" Coil Diameter IH22-2 Farmer
$21.85 Buy It Now
5 of Rubber Mount Rake Teeth 6" Tine x 1.25" Yoke Opening x 5/16" Holes 300411
$39.85 Buy It Now
Rubber Mount Rake Tooth 5.5" Tine x 1.125" Yoke Opening x 5/16" Holes 300411
$21.85 Buy It Now
3 of Double Rake Teeth 6.25" Tine x 2.25" Coil x 5" Tine Gap w/ .244 Wire 146545
$30.00 Buy It Now
Double Rake Tooth 6.25" Tine x 2.25" Coil x 5" Tine Gap w/ 0.244 Wire 146545
$21.85 Buy It Now
Rubber Mount Rake Tooth 6" Tine x 1.25" Yoke Opening x 5/16" Holes 300411 Farmer
$21.85 Buy It Now
Tedder Tooth 9.25" Short Tine x 11" Long Tine x 7.125" Tine Gap x 2.5" Coil
$29.85 Buy It Now
HPBFR31 Complete Rake Wheel Right Hand P20BG003 Fits Frontier WR3315 WR1112
$364.89 Buy It Now or Best Offer
64562 One Hundred (100) New Teeth 46993 Fits New Holland Hay Rake 7" Long 400033
$184.45 Buy It Now
Rake Tooth Clip Kit. 10 each Clip, Bolt, Nut Fits Ford New Holland
$29.85 Buy It Now
Single Universal Rake Tooth Replaces AE24953 AE47389 65609 850612
$15.93 Buy It Now
637507 New (5) Rake Teeth Tine Fits Atlas H&S Koehn Sitrex M&W OTMA
$28.99 Buy It Now or Best Offer
637507 New (1) Rake Tooth Tine Fits Atlas Fits H&S Fits Koehn OTMA Fits Sitrex
$10.99 Buy It Now or Best Offer
1 watcher850614 One Right Hand Rubber Rake Tooth Fits Ford/New Holland 216 258 260
$15.93 Buy It Now
Right Hand Rake Tooth fits Farmhand Morrill New Idea LR-5 LR-6 M-3-P M-5 M-6
$21.85 Buy It Now
VI-1H .275" Wheel Rake Teeth Tine 6" x 10" x 17 1/2" Fits Kuhn Fits Vermeer
$10.99 Buy It Now or Best Offer
1 watcher637507 New (40) Rake Teeth Tine Fits H&S Koehn Atlas Sitrex M&W OTMA
$86.99 Buy It Now or Best Offer
Rake Tooth IH222 (2 pack)
$59.00 Buy It Now or Best Offer
Rake Tooth Fits New Idea 311 312 400 402 403 404 44 45G Rake 49 and 4 Rakes
$21.85 Buy It Now
(5) Double Rubber Mounted Rake Teeth Fits Massey Ferguson 1440 1445 1550
$46.99 Buy It Now or Best Offer
5 of Double Rubber Mounted Rake Teeth 7.25" Tine x 5/16" Bolt Hole w/ 0.25" Wire
$57.70 Buy It Now
46993 Hay Rake Tooth 7" Tine x 3-7/8" x 2-3/8" OD Coil Fits New Idea 256 TENI2D
$21.85 Buy It Now
Rake Tooth Fits 3737507 96OT1 203055 3637507 OT-1 TEOT1 TEOT1E TES1E
$10.99 Buy It Now or Best Offer
Rake Tooth Fits Case/International Harvester Models Replaces 96IH222, 466165R1
$30.00 Buy It Now
New Aftermarket Set Of 10 Rake Teeth Fits John Deere Models 257SE
$33.99 Buy It NowLeft & Right Hay Rake Wheel Set Fits Tonutti P20BG004 P20BG003 Fits Gehl
$617.99 Buy It Now
Complete Rake Wheel (LH) 7mm. Tines 804-P20BG004 Fits Tonutti RTP10 RTP12 RTP8
$446.99 Buy It Now or Best Offer
HPT174 Complete Rake Wheel Left Hand P20BG004 Fits Frontier WR1108 WR1116
$446.99 Buy It Now or Best Offer
Right & Left Hand Rake Wheel Set TEP20BG003 TEP20BG004 Fits Frontier WR1108
$617.99 Buy It Now or Best Offer
Left P20BG004 & Right P20BG003 Rake Wheel Set Fits Tonutti Fits Gehl Fits H&S
$617.99 Buy It Now or Best Offer
HPT174 HPBFR31 RH & LH Rake Wheel Pair with 7 mm. Tines Fits John Deere 702
$617.99 Buy It Now or Best Offer
Complete Rake Wheel (RH) 7mm. Tines 804-P20BG003 Fits Tonutti RTP10 RTP12 V20 T6
$364.89 Buy It Now or Best Offer
257SE New Aftermarket Rake Tooth Fits John Deere 350 851 858 894 896
$9.99 Buy It Now or Best Offer
400 Rubber Mtd Baler Teeth Fits John Deere Vermeer 700 705 R-21 R-23 R-23A R-24
$188.99 Buy It Now
Tedder Tooth Fits Hesston Models
$30.00 Buy It Now
Rake Tooth Fits John Deere Models 257SE TP-257SE TP-257SE-A
$20.00 Buy It Now
10 Rubber Rake Teeth Fits Universal Products 532 542 Models 106000 504-055 7500
$166.99 Buy It Now
Hay Rake Tooth Fits 553 594 594LW BHT90-0050 TP-186SE TP-186SE-A
$11.99 Buy It Now
(1) Tooth Holder 792493 Fits Ford/New Holland Hay Rakes 55 56 256 258 259 2
$7.99 Buy It Now or Best Offer
7500630 Single Rubber Tooth Fits Ford Balers & Henry Windrowers
$40.00 Buy It Now
- NE400033 Rake Teeth 35 Pc. PMNH-1A Fits Ford New Holland Models 258 259 260 NH1A - NE400033 Rake Teeth 35 Pc. PMNH-1A Fits Ford New Holland Models 258 259 260 NH1A. Fits Ford / Fits New Holland Rake: 256, 258, 259, 260, 55, S55, 56, 56, 57. Fits New Idea Rake: 400, 402, 403, 49 (1955 & Later).
- (1) Rake Tooth Fits Hesston Mower Conditioner PT10 PT12 PT7 1012 - PT10, PT12, PT7, 1012. Fits Hesston Mower Conditioner Models Lawn Mower. Ignition Switch for Craftsman Riding Lawn Mower Lawn Tractor STD 365402 5 Spade (# 322401174216 ). Set of 2 42" Riding Lawn Mower Deck Belt for Craftsman #144959 (# 324013691035 ).
- Rake Tooth Fits Hesston Swather/Windrower 420 620 1014 1070 1090 6600 - Fits Hesston Swather/Windrower Models Fits Hesston Mower Conditioner Models 1014, 1070, 1090, 420, 620, 6600. D36203 Bushing, Tube End, Sold Separate - Fits Case 580B, 580C (# 324450580104 ). Fits Case-Fits International Harvester Mower Conditioner Model: 8330.
- (5) Rake Teeth Fits Hesston Mower Conditioner PT10 PT12 PT7 1012 - PT10, PT12, PT7, 1012. Fits Hesston Mower Conditioner Models Lawn Mower. Ignition Switch for Craftsman Riding Lawn Mower Lawn Tractor STD 365402 5 Spade (# 322401174216 ). Set of 2 42" Riding Lawn Mower Deck Belt for Craftsman #144959 (# 324013691035 ).
- 300312 806-001 Set of 40 Rubber Rake Teeth Fits Heath Bean Windrowers - Sold in Sets of 40 - Order Qty 1 = 40 Rubber Teeth. Hardened-steel tine - High grade rubber, no re-grind - High grade chemical adhesives. Tine Length from Mounting Hole: 8". 10 G70 5/16" Weld On Chain Grab Hooks Bucket Flatbed Trailer Wrecker Tie Down (# 234218580296 ).
- 7500630 H60003 Set of 10 Rubber Teeth Fits Ford Balers & Henry Windrowers - Fits Ford: 7500630. Henry: H60003. Henry Models: Most Windrowers. Lockwood-Innes Models: Most Windrowers. Fits Ford Models: 532 and 542 Balers. Hardened-steel tine - High grade rubber, no re-grind - High grade chemical adhesives.
- 7500630 Set/40 Rubber Teeth Fits Ford Balers & Henry Windrowers H60003 504-055 - Fits Ford: 7500630. Henry: H60003. Henry Models: Most Windrowers. Lockwood-Innes Models: Most Windrowers. Fits Ford Models: 532 and 542 Balers. Hardened-steel tine - High grade rubber, no re-grind - High grade chemical adhesives.
- 637507 New (20) Rake Teeth Tine Fits H&S Koehn Atlas Sitrex M&W OTMA - Never had better service since 2007. 15 AMP STATOR KIT fits KOHLER 237878-S / K301 K321 K341 P7-01710 (# 324066474057 ). D36203 Bushing, Tube End, Sold Separate - Fits Case 580B, 580C (# 324450580104 ).
- R-27997-001 Baler Tooth Fits Massey Ferguson - Fits Massey Ferguson Models: 1440 Baler, 1455 Baler, 1550 Baler, 1565 Baler. D36203 Bushing, Tube End, Sold Separate - Fits Case 580B, 580C (# 324450580104 ). 15 AMP STATOR KIT fits KOHLER 237878-S / K301 K321 K341 P7-01710 (# 324066474057 ).
- 203055 One New Rake Tooth Fits Atlas 3737507 - Replaces Part Number: 203055. Fits Atlas Model -3737507. D36203 Bushing, Tube End, Sold Separate - Fits Case 580B, 580C (# 324450580104 ). Never had better service since 2007. 15 AMP STATOR KIT fits KOHLER 237878-S / K301 K321 K341 P7-01710 (# 324066474057 ).
- 3 Double Teeth Tedder Tines 15.375" Tines x 3.50" Gap x 2.75" Coil - Fits Tonutti Hay Tedder Models Ordering Qty 1 = Three (3) Tedder Teeth. Idler Pulley Square Rail 144C56 for Chamberlain LiftMaster Garage Door Opener (# 232782217305 ). The model numbers listed are for reference only.
- 89847572 Single (1) Baler Rake Double Tooth Fits Ford/New Holland, Fits Case IH - Replaces Part Numbers: 9847572, 89847572. Replaces Part Numbers: 89847572, 9847572. Fits Case IH Baler Models: LB333R, LB433R, LBX331R, LBX332R, LBX421R, LBX431R, LBX432R, RB454, RB464, RB564. Fits Ford/New Holland Baler Models: BB900, BB940AR, BB940P, BB940R, BB940S, BB960AR, BB960R, BB960S, BR7060, BR7070, BR7090, 585.
- New Spring Tine, Baler Tooth Fits Case/IH round baler 8420 1710102 - Fits Case IH Baler Model: 8420. Fits Hesston Round Baler models: 530, 5510, 5530, 5540, 5545, 5585. A5.250"B2.5"C1.5". 20 Yellow Fuel Gas Can Jug Vent Cap Rotopax Gott Rubbermaid Chilton Brigg Anchor (# 232854523484 ).
- (1) Rake Tooth Fits Atlas - Replaces 203055, 3637507, OT-1, TEOT1, TEOT1E, TES1E - Replaces Part Numbers: 203055, 3637507, OT-1, TEOT1, TEOT1E, TES1E. Fits Atlas Models - 3737507, 96OT1. D36203 Bushing, Tube End, Sold Separate - Fits Case 580B, 580C (# 324450580104 ). 15 AMP STATOR KIT fits KOHLER 237878-S / K301 K321 K341 P7-01710 (# 324066474057 ).
- 3637507 Rake Tooth Fits Koehn 3637507 - Fits Koehn Model - 3637507. Replaces Part Number: 3637507. D36203 Bushing, Tube End, Sold Separate - Fits Case 580B, 580C (# 324450580104 ). 15 AMP STATOR KIT fits KOHLER 237878-S / K301 K321 K341 P7-01710 (# 324066474057 ).
- 10457 Tine Arm for Neimeyer tedder - 10457 Tine Arm for Neimeyer tedder.
- 5 Rake Teeth 750075 Fits Hesston Swather Windrower 420 620 1014 1070 1090 6600 - Replaces Part Number: 750075. Fits Hesston Swather/Windrower Models Fits Hesston Mower Conditioner Models 1014, 1070, 1090, 420, 620, 6600. Fits Case-Fits International Harvester Mower Conditioner Model: 8330.
- (1) Rake Tooth Fits Hesston Swather Windrower 420 620 1014 1070 1090 6600 750075 - Fits Hesston Swather/Windrower Models Fits Hesston Mower Conditioner Models Fits Case-Fits International Harvester Mower Conditioner Model: 8330. Replaces Part Number: 750075. Dim B (2) 3.500". Dim A (1) 6.000".
- Set/40 Rubber Baler Teeth 2888001 for Vermeer R-21 R-23 R-23A - Replaces Part Numbers.
- (10) Five International Hay Rake Replacement Tooth Teeth Fits Model 5, 455165R1 - Double rake tooth for models: 5, 1952 & later. 7-3/4" tip to front of coil, 3-5/8" between tines, 1-13/16" O.D. coil. Sale is for 10 rake teeth. Used parts are sold as is unless specified otherwise.
- AE47389 Single Rake Tooth 1-5/8" Yoke Opening Fits John Deere 54 64 650 662 670 - AE47389, AE24953, 96R4, 288-8001, 3298-73518, RTUJHRT-187. Fits John Deere Rake Models: 54, 64, 650, 652, 660, 662, 670, 672, 74. 1-5/8" Yoke Opening. Idler Pulley Square Rail 144C56 for Chamberlain LiftMaster Garage Door Opener (# 232782217305 ).
- 792493 (25) Rake Tooth Hold Down Clips Fits Ford/New Holland Hay Rakes - Replaces Part Numbers: 33970, 792493. Fits Ford/New Holland Hay Rake Models: 55, S55, 56, 56B, 256, 258, 259, 260. Uses 3/8" carriage bolt. D36203 Bushing, Tube End, Sold Separate - Fits Case 580B, 580C (# 324450580104 ).
- hay rake - 8 Wheele Hay Rake. In good working condition, everything works as it should. Replaced Hydraulic hoses in 2022, tires are good. Also comes with two 4 wheele hay rakes, one is in fair condition the other is for parts.
- 10 Rubber Mount Rake Teeth Fits John Deere 1.625" Yoke Opening x 3/8" Holes RMT7 - AE24953, AE47389, RMT7, RMT-7, URMT-7. Fits John Deere Rake Models Dim A (1) 1-5/8" Yoke Opening. Idler Pulley Square Rail 144C56 for Chamberlain LiftMaster Garage Door Opener (# 232782217305 ). 10 G70 5/16" Weld On Chain Grab Hooks Bucket Flatbed Trailer Wrecker Tie Down (# 234218580296 ).
- 50 Rake Teeth 64562 With Mounting Hardware 792493K Kit Fits Rolabars 256 258 259 - Fits New Holland Models: 55, 568 and 57 Rakes & Models 256, 258, 259 and 260 Rolabars. Replaces Part Numbers: 280744, HD38NCNUT, 804792493, 804-792493, 792493, 792493K. Replaces Part Numbers: 400033, 33549, 80464562, 804-64562, PMNH-1A, 46993, 64562, 96NH1A, TENH1A, TENI2D.
- GT46S Hay Tedder Tooth fits Hesston fits Walton fits New Idea fits Galfre - Replaces Part Numbers: GT46S, R18030616, VLH7001. Fits Galfre Rake models: GAT500, GT280. Fits New Idea Hay Tedder models: 4227. D36203 Bushing, Tube End, Sold Separate - Fits Case 580B, 580C (# 324450580104 ).
- (10) - Rubber Rake Teeth Fits Ford New Holland 56 57 256 & 850612 - Fits Ford/New Holland Hay Rake Models Yoke Width 1-11/16". Single tooth for all parallel bar rakes w/ 1 5/8" bar. Replaces Part Numbers.
- (1) Single Round Smooth Trailer Aluminum Fender 37"L x 25"H x 11.5"W - (1) Single Round Smooth Aluminum Cargo Trailer Fender 37"L 25"H 11.5"W, 11 Gauge. 090 ( 2.30mm ) Has a plastic film protective coating on them. you will not find this size any cheaper. Ohio Residents Only.
- 9600020 Daros Hay Tedder Double Yoke Kit for Transmission Drive
- (5) Fits International 5 Bar Hay Rake Tooth Teeth Replaces 457374R1,462978R1 - Idler Pulley Square Rail 144C56 for Chamberlain LiftMaster Garage Door Opener (# 232782217305 ). 20 Yellow Fuel Gas Can Jug Vent Cap Rotopax Gott Rubbermaid Chilton Brigg Anchor (# 232854523484 ). Pair of Fits CAT 1 Quick Hitch Adapter Bushings-Category 1-3 Pt Tractor Busing S (# 233414784534 ).
- 806-001 10 Rubber Teeth For Heath Bean Windrowers 300312 Fits Massey Ferguson - Replaces Part Numbers : 806-001, 300312, 1000-195. Sold in Sets of 10 - Order Qty 1 = 10 Rubber Teeth. 15 AMP STATOR KIT fits KOHLER 237878-S / K301 K321 K341 P7-01710 (# 324066474057 ). GAUGE AMP Fits Case DC DS VAC Tractor (# 233441056278 ).
- (10 Pack) - Hay Rake Teeth 15 x 11.5 for Sitrex H&S Atlas Koehn M&W Otma 3637507 - 10 G70 5/16" Weld On Chain Grab Hooks Bucket Flatbed Trailer Wrecker Tie Down (# 234218580296 ). Set of 2 42" Riding Lawn Mower Deck Belt for Craftsman #144959 (# 324013691035 ). D36203 Bushing, Tube End, Sold Separate - Fits Case 580B, 580C (# 324450580104 ).
- Five (5) Double Rake Teeth Overall Length 7.250" Width 6.500" - Fits Darf Rake - 933, 934. Ordering Qty 1 =Five (5) Double Wire Rubber Rake Teeth. Idler Pulley Square Rail 144C56 for Chamberlain LiftMaster Garage Door Opener (# 232782217305 ). 1124732C94 Lift Angle Cylinder Seal Kit Fits IH Dresser TD7C TD7H TD8H (# 401995948470 ).
- 25 Pack 257SE Steel Rake Tooth Fits John Deere Teeth Fits 350 851 858 896 - Fits Fits John Deere Models 350, 851, 858, 894, 896. 10 G70 5/16" Weld On Chain Grab Hooks Bucket Flatbed Trailer Wrecker Tie Down (# 234218580296 ). D36203 Bushing, Tube End, Sold Separate - Fits Case 580B, 580C (# 324450580104 ).
- 637507 New (10) Rake Teeth Tine Fits Koehn H&S Atlas Sitrex M&W OTMA - Never had better service since 2007. 15 AMP STATOR KIT fits KOHLER 237878-S / K301 K321 K341 P7-01710 (# 324066474057 ). D36203 Bushing, Tube End, Sold Separate - Fits Case 580B, 580C (# 324450580104 ).
- 15x6.00-6 Hay Tedder Farm Implement AG TIRE RIB 10ply T-L 1,015 lbs. wt capacity - FOR: Hay Tedder ; Riding Mowers ; Zero Turn Mowers. Maximum Weight Carrying Capacity: 1,015 lbs. & 10 m.p.h. Tread Depth: 4/32 Load Index: 69 / A3. NOTE:NHS N on H ighway S ervice Tire.
- 15x6.00-6 Hay Tedder Farm Implement AG TIRE RIB 6ply T-L 710 lb wt capacity - FOR: Hay Tedder ; Riding Mowers ; Zero Turn Mowers. Maximum Weight Carrying Capacity: 710 lbs. & 10 m.p.h. Tread Depth: 4/32 Load Index: 69 / A3.
- Set Of 40 Rubber Teeth Fits Heath Fits Massey Ferguson 1000-195 300312 806-001 - Sold in Sets of 40 - Order Qty 1 = 40 Rubber Teeth. Tine Length from Mounting Hole: 8". Hardened-steel tine - High grade rubber, no re-grind - High grade chemical adhesives.
- Twenty (20) New Right Hand Rake Teeth Fits Ford New Holland 216 258 - Fits New Holland Rake Models: 216, 258. Fits Rolabar Rake Model: 260. Tine length is 10". Yoke opening is 1-55/64".
- Right Hand Rake Tooth Fits Ford/New Holland 2027-G2 2030-G2 216 258 259 260 - Fits Ford/New Holland Hay Rake Models May also fit Gearmore Basket Rake Models: 2027-G2, 2030-G2. Allen - Right Hand Rakes. Hardened-steel tine - High grade rubber, no re-grind - High grade chemical adhesives.
- NEW (2) Tedder Teeth 13” Short Tine 14.75” Long Tine 4.5” Coil PZPZ107 UOP=1 GLX - NEW (2) Tedder Teeth 13” Short Tine 14.75” Long Tine 4.5” Coil PZPZ107 UOP=1 GLX. No original packaging.1-2 Storage M
- 40 Wheel Rake Tines fits OTMA 6.5" x 11.5" x 15" Curved End w/ 0.262" Thick Wire - Fits Atlas, Fits H&S, Fits Koehn, Fits OTMA, Fits Sitrex, Fits M&W - Several Rake Models. Idler Pulley Square Rail 144C56 for Chamberlain LiftMaster Garage Door Opener (# 232782217305 ). 20 Yellow Fuel Gas Can Jug Vent Cap Rotopax Gott Rubbermaid Chilton Brigg Anchor (# 232854523484 ).
- Round Baler Tooth 6x Fits Case & Hesston fits IH 8420 5510 5530 5585 - Fits Case, Hesston Hay Baler Models 20 Yellow Fuel Gas Can Jug Vent Cap Rotopax Gott Rubbermaid Chilton Brigg Anchor (# 232854523484 ). POWER STEERING WHEEL CAP Fits IH FARMALL 504 584 656 706 806 856 986 1086 1 (# 233434696998 ).
- SMA Holland Rake and Baller Tooth 804-86551419 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
- SMA Rake and Baler Tooth 804-257SE - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
- Hay Rake Tooth Yellow .262 Wire 1.25" 804-64562 - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
- (5-Pk) Left Hand Summer Debarker Tooth P112-1B - We are not an authorized dealer of this product. This product has no manufacturers warranty. The product image is the actual item you will receive including all contents unless otherwise noted.
- (5-Pk) Summer Center Debarker Tooth P112-1C - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted. We are not an authorized dealer of this product. This product has no manufacturers warranty.
- Set of 25 New Rake Teeth Hold Down Clip Fits BUSH HOG, Brush Hog, Fits Ford - Fits Bush Hog, Brush Hog, Fits Ford, Fits John Deere, Fits New Holland. Fits all models using steel coil tooth # 64562 . Fits Models: 1495, 1496, 1499, 256, 258, 259, 260, 495.
- Tine Tedder Teeth Fits Kuhn KT-3 Disc Mower Rake 847810087582 804-57609000 - This item is:_______________Tine Tedder Teeth Fits Kuhn KT-3 Disc Mower Rake 847810087582 804-57609000___________________________________________________ This item is new, however, it may have scratches and marks from handling.
- (10) Fits International 5 Bar Hay Rake Tooth Teeth Replaces 457374R1,462978R1 - Idler Pulley Square Rail 144C56 for Chamberlain LiftMaster Garage Door Opener (# 232782217305 ). 20 Yellow Fuel Gas Can Jug Vent Cap Rotopax Gott Rubbermaid Chilton Brigg Anchor (# 232854523484 ). Pair of Fits CAT 1 Quick Hitch Adapter Bushings-Category 1-3 Pt Tractor Busing S (# 233414784534 ).
- 10pk Hay Rake Tooth 6" Double Tine x 3.5" Tine Gap x 1.875" Coil 611181 Farmer - 611181, PMHE-2, TEHE2, 750057, 750075, 96HE2. 3.5" Tine Gap. 6" Double Tine. (2) 130794 Craftsman Spindle Mandrel For Poulan Fits Husqvarna 36" 38" 42" (# 323974857819 ). Ignition Switch for Craftsman Riding Lawn Mower Lawn Tractor STD 365402 5 Spade (# 322401174216 ).
- Set of 10 Fits JD Rake Teeth 7.5" Tine x 3.6875 Tine Gap x 1.75" Coil 186-SE - 3.6875" Tine Gap. Fits John Deere Rake Models 553, 594. Sold in Sets of 10 - Order Qty 1 = 10 Rake Teeth. 1.75" Coil. 10 G70 5/16" Weld On Chain Grab Hooks Bucket Flatbed Trailer Wrecker Tie Down (# 234218580296 ).
- New Holland 216 Unitized Rake Steering Link Adj Strap & Basket Frame Bracket - Cleaning out the shed and found a couple of parts that went on the NH 216 rake. One is a steering link strap and the other is a bracket for the basket frame. Maybe someone can use these? I have no idea if they fit other models off rakes but the part numbers are 848125 on the strap, and 86510223 on the bracket. Returns aren't accepted so please look the pictures and ask any questions prior to purchase. Thanks
- 10 LH Rubber Mounted Teeth Fits Ford Holland 216 256 258 259 Models 580848M1 - 580848M1, 65668, 65668K, 850613, AE47389, AE24593. Fits Ford/Fits New Holland - 216, 258 with Left Hand Hook; 259 Rolabar Rake. Fits John Deere Models 650, 652, 660, 662, 70 and 71 Rakes. High grade rubber, no re-grind - High grade chemical adhesives - Hardened-steel tineLife-cycle tested to OEM-type Specifications.
- Set of 10 Rake Teeth Fits John Deere Hay Rake 350 350A 54 64 640 650 - 350, 350A, 54, 64, 640, 650, 652, 660, 662, 670, 673, 74, 851, 858A, 894, 894A, 896, 896A. Fits John Deere Hay Rake Models Single tooth for all parallel bar rakes w/ 1 5/8" bar.
- 6 Double Teeth Tedder Tines 15.375" Tines x 3.50" Gap x 2.75" Coil - Ordering Qty 1 = Six (6) Tedder Teeth. Idler Pulley Square Rail 144C56 for Chamberlain LiftMaster Garage Door Opener (# 232782217305 ). 1124732C94 Lift Angle Cylinder Seal Kit Fits IH Dresser TD7C TD7H TD8H (# 401995948470 ).
- E126673 - Pin for Tedder - This part fits the following models.
- GT46S Pack of 5 Rake Tedder Teeth Fits Galfre Fits Hesston Fits New Idea - Replaces Part Numbers: GT46S, R18030616, VLH7001. Fits Galfre Rake Models: 280 (1995>), GTS280 (1995>), GT280 (1995>). Fits Galfre Hay Tedder Models : Several (All models with Black Tines). 10 G70 5/16" Weld On Chain Grab Hooks Bucket Flatbed Trailer Wrecker Tie Down (# 234218580296 ).
- SMA Rake and Baler Tooth Fits John Deere 804-257SE - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
- 4PK NOS Tine Double Rake Teeth (B330)
- 50 Pack Hay Rake Teeth w/ Clips & Hardware NE400033 Fits New Idea 402 280744 - Fits Ford & Fits New Holland Hay Rake / Tedder Model(s): 256, 258, 259, 260, 55, 56, 56B, 57, S55. Fits New Idea Hay Rake / Tedder Model(s): 49 (1955>), 403 (1955>), 402 (1955>), 400 (1955>). (50) Rake Teeth - Tech Info.
- 804-792493 Thirty Rake Teeth w/ Clips & Hardware 804-64562 Fits New Holland - Replaces Part Numbers: TENH1A, TENI2D, 400033, 33549, 80464562, 804-64562, PMNH-1A, 46993, 64562, 96NH1A. Fits New Holland Rake Models: 256, 258, 259, 260, 55, 56, 57. Fits New Idea Rake / Tedder Models: 49, 402, 403 (1955 & Later).
- 46993 Thirty Rake Teeth With Clips Nuts & Bolts Fits New Holland 55 56 57 792493 - Replaces Part Numbers: 80464562, 804-64562, PMNH-1A, 46993, 64562, 96NH1A, TENH1A, TENI2D, 400033, 33549. Fits Ford / Fits New Holland Rake: 256, 258, 259, 260, 55, S55, 56, 56, 57. Fits New Idea Rake: 400, 402, 403, 49 (1955>).
- 46993 Twenty Rake Teeth With Clips Nuts & Bolts Fits New Holland 55 56 57 792493 - Replaces Part Numbers: 80464562, 804-64562, PMNH-1A, 46993, 64562, 96NH1A, TENH1A, TENI2D, 400033, 33549. Fits Ford / Fits New Holland Rake: 256, 258, 259, 260, 55, S55, 56, 56, 57. Fits New Idea Rake: 400, 402, 403, 49 (1955>).
- 50 Rake Teeth 64562 With Hardware Fits NH 792493K Kit Fits Rolabars 260 258 259 - 280744, HD38NCNUT, 804792493, 804-792493, 792493, 792493K. 400033, 33549, 80464562, 804-64562, PMNH-1A, 46993, 64562, 96NH1A, TENH1A, TENI2D. Rake Teeth Specifications Includes Fifty (50). Includes Fifty (50) of Each.
- Twenty-Five Rake Teeth 804-64562 Fits New Holland S55 Fits New Idea 402 400033 - Fits New Holland: PMNH-1A, 46993, 64562. Fits New Holland Hay Rake / Tedder Model(s) Fits New Idea Hay Rake / Tedder Model(s) 256, 258, 259, 260, 55, 56, 56B, 57, S55. Fits Ford / Fits New Holland: 804-64562.
- 850614 96R24 Set/25 RH Rubber Mounted Teeth Fits New Holland 258 260 Balers - 850614,850614-IMP, 96R24. 216, 258, 259, 260 Rolabar, 56B. Fits Models.
- HR-0169 Pack of Twenty (20) Rubber Rake Teeth Fits Gearmore Tedder/Rake 2030-G2 - Fits Gearmore Rake Model(s): 2027-G2, 2030-G2. Fits Allen Model(s): Left Hand Rake. Fits Ford New Holland Rake Model(s): 216, 230, 256, 258, 259, 260, 56, 56B, 57. Fits Massey Ferguson Rake Model(s): 25 (SN 419009907>), 36 (SN 012159>), 37.
- LH Rubber Mounted Hay Rake Teeth Set of Forty 850613 Fits New Holland 65668 - T16-0154, URMT-3, SHN-352038, 300114, 469850613, 469-850613, 850613, 580848M1, RTIANHL, HR-0169. 65668K, NH850613, 65668, BR65668IMP, 65668-K, RMT3, 9000-999, 469850614, RMT-3, 127-1302, 352038. Fits New Holland Hay Rake Models.
- 40 Pk Left Hand Rubber Mounted Rake Teeth Fits Ford New Holland 216 258 259 - Fits New Holland Hay Rake Models: 216 & 258 With Left Hand Hook, & 259 Rolabar Rake. Fits Allen Hay Rake Models: Left Hand Rake. Ordering Qty 1 = Forty (40) Rubber Mounted Rake Teeth. 10 G70 5/16" Weld On Chain Grab Hooks Bucket Flatbed Trailer Wrecker Tie Down (# 234218580296 ).
- Right Hand Rake Tooth Fits Edcor Fits Ford Gearmore Holland 2027-G2 2030-G2 216 - May also fit Gearmore Basket Rake Models: 2027-G2, 2030-G2. Fits Ford/Fits New Holland Hay Rake Models: 216, 258, 259, 260 Rolabar, 56B. Allen - Right Hand Rakes. Fits Massey Ferguson - 25, 36, 37. Tine length is 10".
- International Hay Rake Replacement Tooth Teeth Fits Model 5, 455165R1 IH-22-2 - International Hay Rake Replacement Tooth Teeth Fits Model 5, 455165R1 IH-22-2.
- 10 Rubber Rake Teeth Fits John Deere & Vermeer R-9 R-23 R24 700 705 AE56204 - Fits John Deere Models: 700, 705. High grade rubber, no re-grind - High grade chemical adhesives - Hardened-steel tine. 15 AMP STATOR KIT fits KOHLER 237878-S / K301 K321 K341 P7-01710 (# 324066474057 ).
- 60 Double Teeth Fits Ford/Holland & Fits Case IH 89847572 9847572 - Replaces Part Numbers: 89847572, 9847572. Fits Case IH Baler Models: LB333R, LB433R, LBX331R, LBX332R, LBX421R, LBX431R, LBX432R, RB454, RB464, RB564. 20 Yellow Fuel Gas Can Jug Vent Cap Rotopax Gott Rubbermaid Chilton Brigg Anchor (# 232854523484 ).
- John Deere loose hay elevator - John Deere loose hay elevator. Have equipment on site to load.
- 15 NH-1A Hay Rake Teeth new old stock - NEW as seen in pictures.
- 8 United Spring IH-1 IH-1A Hay Rake Teeth 45737 new old stock - 8 pieces as seen in pictures.
- Brand New (25) Rake Tooth Hold Down Clips 792493 Fits Ford/New Holland Hay Rakes - Replaces Part Numbers: 33970, 792493. Fits Ford/New Holland Hay Rake Models: 55, S55, 56, 56B, 256, 258, 259, 260.
- New 25 Rubber Mounted RH 850614 96R24 Teeth Fits New Holland 258 260 Balers - 850614, 96R24, PMNH850614R, RTIANH-R, RTIANHR, HR-0168, 850614-IMP. 216, 258, 259, 260 Rolabar, 56B. Fits Massey Ferguson - 25, 36, 37. Fits Models 10" Tine Length From Mounting Hole. May also fit Gearmore Basket Rake Models: 2027-G2, 2030-G2.
- New 40 Pk Left Hand Rubber Mounted Rake Teeth Fits Ford New Holland 216 258 259 - Fits Ford/New Holland - 216, 258 with Left Hand Hook; 259 Rolabar Rake. High grade rubber, no re-grind - High grade chemical adhesives - Hardened-steel tine. Allen - Left Hand Rakes. Fits Massey Ferguson - 25, 36, 37.
- (20) Fits International 5 Bar Hay Rake Tooth Teeth Replaces 457374R1,462978R1 - Used parts are sold as is unless specified otherwise.
- Da Ros 6900002 Tedder Tine for GEX GL Tedders - Part Number: 6900002. Used on 2 basket, 4 basket and six basket Hay Tedders. Fits 2,4 and 6 basket Da Ros Hay Tedders. Mount Orab, Ohio 45154. Ohio Residents Only.
- 5 of Pollard Hay Rake Teeth 6.25" Tine x 1.687" Coil x 3.75" Hook w/0.262" Wire - Replaces Pollard OEM #: 1706 Tine Length: 6.250". Coil Diameter: 1.687".
- (5) Five International Hay Rake Replacement Tooth Teeth Fits Model 5, 455165R1 - Double rake tooth for models: 5, 1952 & later. 7-3/4" tip to front of coil, 3-5/8" between tines, 1-13/16" O.D. coil. Sale is for 5 rake teeth. Used parts are sold as is unless specified otherwise.
- 6 of Hay Rake Teeth 6" Double Tine x 3.5" Tine Gap x 1.875" Coil 611181 Farmer - Mower conditioners/windrowers 475, 555, 575, 650, 655, 1075, 1150, 1255, 8320, 8330, 8340, 8820 and 8830. Conditioners 2130, 2160, 2230 and 2262. Conditioners/windrowers PT-7, PT-10, PT-12, 320, 420, 500, 520, 620, 1010, 1014, 1070, 1085, 1090, 1091, 1095, 1110, 1120, 1130, 1150, 1160, 6200, 6400, 6450, 6465, 6566, 6600, 6610, 8100 and 8200. Replaces - No 750075 Replaces - No 6111181 Replaces - No 750075, 611181.
- 30 of 792493K & NH1A Rake Teeth Kit Fits 256, 258, 259 & 260 Roto Bars 792493K - - One New Aftermarket Replacement Set of 50 Hay Rake Teeth / Tines and 50 Hold Down Clips, Nuts & Bolts made to fit Rake models: 55, 56, 57, 256, 258, 259, 260. 6.625" Tine Length 3.875" Coil to Hook 2.50" Tooth Coil Teeth Mounting Clip Kit Includes: Clips (# 792492), Bolts (# 280744), and Nuts & Lock-washers for each 1-prong Tooth. Replaces Part Numbers: 64562, 792493K.
- 100 of 792493K & NH1A Rake Teeth Kit Fits 256, 258, 259 & 260 Roto Bars 792493K - One New Aftermarket Replacement Set of 50 Hay Rake Teeth / Tines and 50 Hold Down Clips, Nuts & Bolts made to fit Rake models: 55, 56, 57, 256, 258, 259, 260. 6.625" Tine Length 3.875" Coil to Hook 2.50" Tooth Coil Teeth Mounting Clip Kit Includes: Clips (# 792492), Bolts (# 280744), and Nuts & Lock-washers for each 1-prong Tooth. Replaces Part Numbers: 64562, 792493K.
- 100 of 7" Tine x 3-7/8" x 2-3/8" Diameter Coil Hay Rake Teeth 64562 Farmer Bob's - Hay Rake Tooth, 262 wire, yellow, Fits Models 55, 56 and 57 Rakes and Models 256, 258, 259 and 260 Rotobars.
- 10 of Hay Rake Teeth 5.25" Double Tine x 2.5" Tine Gap x 1.50" Coil HE-6 Farmer - Fits Baler(s) 8420 Fits Baler(s) RB34 Fits Baler(s) 530, 730, 830, 1734, 5134, 5510, 5530, 5540, 5545, 5580, 5580E, 5585 Replaces OEM nos 1710102, 2700222 Fits Baler(s) 1734 Fits Baler(s) 4643, 6243, 6343 Replaces OEM nos 96HE6, TEHE6, 01710102 (A) Overall Length: 6.750" (B) Tine Gap: 2.5" (C) Coil Diameter: 1.5".
- 5 of Kuhn Hay Rake Tedder Tooth 12.875" Tines x 2.75" Coil x 3.625" Tine Gap - Kuhn Rake / Tedder tooth. The tine length is 12.750". Coil O.D. is 2.750" and tine gap measures 3.625". Fits Kuhn hay tedders and rakes.
- 10 of Kuhn Hay Rake Tedder Tooth 12.875" Tines x 2.75" Coil x 3.625" Tine Gap - Kuhn Rake / Tedder tooth. The tine length is 12.750". Coil O.D. is 2.750" and tine gap measures 3.625". Fits Kuhn hay tedders and rakes.
- 50 of Pollard Hay Rake Teeth 6.25" Tine x 1.687" Coil x 3.75" Hook w/0.262" Wire - Replaces Pollard OEM #: 1706 Tine Length: 6.250". Coil Diameter: 1.687".
- 25 of Pollard Hay Rake Teeth 6.25" Tine x 1.687" Coil x 3.75" Hook w/0.262" Wire - Replaces Pollard OEM #: 1706 Tine Length: 6.250". Coil Diameter: 1.687".
- 20 of Pollard Hay Rake Teeth 6.25" Tine x 1.687" Coil x 3.75" Hook w/0.262" Wire - Replaces Pollard OEM #: 1706 Tine Length: 6.250". Coil Diameter: 1.687".
- Walton / Galfre (NEW) Vertical Gear for Hay Tedder 35 Tooth with 4 bolt flange - This gear may fit Galfre used on GTS 280, GTS 420, GTS 480, and GTS 520 Series. Walton WT9. Walton WT21. 1.75 - 35 Tooth vertical output gear. 4 Bolt Flange Gear. 1.75 – 35 Tooth Gear. Vertical gear.
- Galfre / Walton 0020NGTS End Gear For Hay Tedder, 20 Tooth 1-3/8" Bore - P/N 0020NGTS. This gear may fit Galfre used on GTS 280, GTS 420, GTS 480 and GTS 520 Series. Walton WT9. Walton WT21. 1-1.75:1 20 Tooth. 1.75:1 20 Tooth Gear. 1 3/8” bore (35mm).
- Walton and Galfre GTS series 20 tooth end gear - Walton and Galfre GTS series 20 tooth end gear. I have a Walton Wt9 hay tedder for salvage message me if you need something I don’t have listed and I may have it.
- Set of 60 Double-Tine Teeth Fits Ford/New Holland Balers Hayheads 9847572 - Replaces Part Numbers: 9847572, 89847572. Replaces Part Numbers: 89847572, 9847572. Gold Series, Double Tine. Tine Length from Bottom of Yoke: 7-3/4. Fits Ford/New Holland Header Models: 27P, 29P, 340W, 345W, 346W, 350W, 355W, 356W, 365W, 366W, 900W.
- TWO BOTTOM FARM PLOW for parts or repair - Two bottom plow is not in horrible condition. Repairable.Thanks for looking.
- (25) Rake Tooth Hold Down Clips 792493 Fits Ford/New Holland Hay Rakes - Replaces Part Numbers: 33970, 792493. Fits Ford/New Holland Hay Rake Models: 55, S55, 56, 56B, 256, 258, 259, 260. Uses 3/8" carriage bolt. D36203 Bushing, Tube End, Sold Separate - Fits Case 580B, 580C (# 324450580104 ).
- Set Of 25 Rake Tooth Hold Down Clip Fits Various Application 1495 1496 1499 256 - Fits Bush Hog, Brush Hog, Fits Ford, Fits John Deere, Fits New Holland. Fits all models using steel coil tooth # 64562 . Fits Models: 1495, 1496, 1499, 256, 258, 259, 260, 495.
- 2021 Kuhn 110SR 8wheels with a kicker wheel. Selling due to injury. - 2021 Kuhn 110SR 8wheels with a kicker wheel. Selling due to injury..used once.
- New Holland Rubber Rake Tooth - 10 Pack Replaces AE47389 850612 65609 AE24953 - Replaces codes: AE47389 850612 65609 AE24953. Single tooth for all parallel bar rakes w/ 1 5/8" bar.
- New Holland Rubber Rake Tooth - 30 Pack Replaces AE47389 850612 65609 AE24953 - Replaces codes: AE47389 850612 65609 AE24953. Single tooth for all parallel bar rakes w/ 1 5/8" bar. We are located at: Brooks Ag Parts LLC.
- Early model farmhand tractor loader vintage original - Village farm hand tractor mounted stacker. The tractor is not included. Loader has been removed and is ready to load out. Mount are for Farmall.regular,f20,f30
- Spacer Bushing for DaRos Hay Tedder Leg, replaces code 6300140 - Part Number: 6300140. This bushing has an OD of 42mm, ID or 30mm and height of 21mm. Ohio Residents Only.
- 3630233 Weldment,Support Sector Fit's Rhino Econo V-Rake ER8, ER10, ER12,
- Input Shaft with Gear for Walton / Galfre GTS Series Hay Tedder - The GTS series Hay Tedder has cast steel round housing with flat bar tine arms. Will not fit the GS Series Hay Tedders with a square steel housing with a removable lid. make sure we have the right item for your needs!
- Blade Bolt for Morra MF22 & MF25 Disc Mowers Code 01665 - Includes one bolt and one nut. Part Number 01665. Ohio Residents Only.
- Tedder Teeth 9.25" Short Tine x 10.75" Long Tine x 7.125" Tine Gap x 1.625" Coil - Fits: Hay Tedder Model 3700 (LH Side; Narrow Tine); Fits: Hay Tedder Models: HS360, Haybob 300, Hay Bob 300; Two Basket Rake Tedder; (LH Side; Narrow Tine); Replaces: PZ107, ZPZ107. Fits: Hay Tedder Model HS360; Replaces: 510.01.287, 51001287,.
- Tedder Teeth 7" Short Tine x 9.25" Long Tine x 4.5" Tine Gap x 2.5" Coil pz106 - Fits: Hay Tedder Model 3700 (RH Side; Narrow Tine); Fits: Hay Tedder Models: HS360, Haybob 300, Hay Bob 300; Two Basket Rake Tedder; (RH Side; Narrow Tine). Replaces: PZ106, ZPZ224 Fits: Hay Tedder Model HS360; Replaces: 510.01.286, 510.01.367, 51001286, 51001367.
- Tedder Tooth 9.25" Short Tine x 11" Long Tine x 7.125" Tine Gap x 2.5" Coil - Compatible with Rake / Tedder(s) 3700 Compatible with Rake / Tedder(s) HS360 Compatible with Rake / Tedder(s) Haybob 300, HS360 Replaces OEM nos PZ110, 510.01.288, 51001288, 96PZ3, PZPZ110, ZPZ110Z Short Tine Length: 9.25" Tine Gap: 7.125" Long Tine Length: 11.00" Center of Coil to Top of Tine: 2.5".
- 3 of Tedder Teeth 9.25" Short Tine x 11" Long Tine x 7.125" Tine Gap x 2.5" Coil - Compatible with Rake / Tedder(s) 3700 Compatible with Rake / Tedder(s) HS360 Compatible with Rake / Tedder(s) Haybob 300, HS360 Replaces OEM nos PZ110, 510.01.288, 51001288, 96PZ3, PZPZ110, ZPZ110Z Short Tine Length: 9.25" Tine Gap: 7.125" Long Tine Length: 11.00" Center of Coil to Top of Tine: 2.5".
- Galfre Hay Tedder Tine Mounting Kit, Includes 0045NGTS Washer with Bolt and Nut - 0045NGTS Tine Washer with 0044NGTS Tine Mounting Bolt and 0035NGTS Hex Nut. Replaces Part Number: 0045NGTS, 0044NGTS, 0035NGTS. Tine Mounting Kit for Galfre Tedders, fits most GTS and GS Model Hay Tedders.
- 89847572 Set of 12 Fits New Holland Baler Rake Teeth Fits BB900 BB960R BR7060 - Fits Ford/New Holland Balers: 585, BB900, BB930AR, BB940R, BB940AR, BB960R, BB960AR, BB9050R, BB9060R, BB9070R, BB9080R, BR7060, BR7070, BR7080, BR7090. Compatible w/ Fits Ford/NH Part Number: 89847572.
- 16 X 6.50 X 8 6 Ply Rated Morra Hay Tedder Tire and Wheel, fits Model MH530 - Features a wide flotation 6 ply rated tire with tube, replaceable ball bearings with a 25mm bearing bore and 54mm (2.125") bearing width with and extended lip for trailer axle type dust cover (Included).
- 6100270 Fixed Tine Arm for DaRos Hay Tedder with One Mounting Hole and One Mount - Part Numbers: 6100270. Fits both 2 Basket GL and 4 Basket GEX Series Hay Tedders, Will Not fit the Befco version of this machine. One 14mm mounting hole and one 14mm pin. Mounting Hole and Pin are 3" on Center.
- 6100280 Adjustable Tine Arm for DaRos Hay Tedder with One Threaded Hole - Part Numbers: 6100280. This is the arm with one plain mounting hole and one threaded mounting hole and is the arm that can fold back for transporting giving the tedder a narrower profile. Fits both 2 Basket GL and 4 Basket GEX Series Hay Tedders, Will Not fit the Befco version of this machine.
- KUHN 57759500 Bearing Housing + 2 64757518700F Bushings Rotary Rakes See List
- 3 of Tedder Rake Teeth 16.75" x 3.5" x 2.75" Coil Diameter Replaces 109040 T2 - Overall Length: 16.75" Tine Gap: 3.50" Coil Diameter: 2.75".
- New Holland Hay Rake 55 PULL TYPE GROUND DRIVE 5 Bar - New Holland Hay Rake 55 PULL TYPE GROUND DRIVE 5 Bar
- John Deere 894 PULL TYPE HAY RAKE GROUND DRIVE 4 Bar
- TWO 15x6.00-6 Hay Tedder Farm Implement AG TIRE RIB 10 Ply Rate 1015 lb capacity
- 139050 New Holland Universal Fits 55, 256, 258, 259, and 260 Rakes - New Holland 260. The universal fits New Holland 55. New Holland 256.
- Rugg Buddy Bee 31 in. L x 12 in. W Steel Leaf Rake Wood Handle (Pack of 12) - Rugg Buddy Bee 31 in. L x 12 in. W Steel Rake. Smooth finished 30 in hardwood handle. Product Type: Leaf Rake. Paint And Paint Supplies. Lawn / Garden / Farm Supplies. Handle Material: Wood Handle.
- John Deere PULL TYPE HAY RAKE GROUND DRIVE 4 Bar
- New Holland 256 hay rake, roller bar, 273 baler and conditioner, 515 Ford cycle - New Holland 256 hay rake/ roller bar, New Holland baler #273, New Holland conditioner #157, and 7 ft. Ford cycle #515. All in good running condition.
- Lunette Ring / Tow Ring / Pintle Ring Weld-On - New Weld On Pintle Ring with 2-3/8" ID. Mount Orab, Ohio 45154. 1-0 toll free. These have a little surface rust on them but are fine, we have about a 100 of them if you are looking for more than 1. Ohio Residents Only.
- Lunette Ring / Tow Ring / Pintle Ring Weld-On - New Pintle Ring with 2-3/8" ID, This item has been in a crate inside the warehouse for 15 years or more, we have about 100 of them if you are looking for more than one. Part Number - Pintle Ring. Mount Orab, Ohio 45154.
- 6-Way Round Trailer Connectors for Trailer end and Vehicle end, - Part Number - 5401-Kit.
- hay rake - hay rake. Vermeer hay rake
- International Hay Rake Replacement Tooth Teeth Fits Model 5, 455165R1 IH-22-2 - Double rake tooth for models: 5, 1952 & later. 7-3/4" tip to front of coil, 3-5/8" between tines, 1-13/16" O.D. coil. Used parts are sold as is unless specified otherwise.
- 15x6.00-6 15x600-6 15/6.00-6 15/600-6 15x6-6 15/6-6 10ply Hay Tedder TIRE RIB - 15x6.00-6 15x600-6 15/6.00-6 15/600-6 15x6-6 15/6-6 10ply Hay Tedder TIRE RIB T-L 1,015 lb capacity. FOR: Hay Tedder ; Riding Mowers ; Zero Turn Mowers. Maximum Weight Carrying Capacity: 1,015 lbs. & 10 m.p.h.
- Tedder Tine Rake Tooth 15.50" Tine x 3.50" Tine Gap x 2.787" Coil GS-1 Farmer - Models: WT16 WT19 WT21 WT9 21046. Models: 280, GS280, GST280, All up to 1995.
- Tedder Teeth 12.75" Tine x 3.125" Gap x 3.125" Coil Diameter FT1 Farmer Bob's - Tedder Teeth 12.75" Tine x 3.125" Gap x 3.125" Coil Diameter 5HPT82 T82.
- 850614 Right Hand Rake Tooth for Gearmore New Holland 2027-G2 2030-G2 216 258 ++ - We can search quickly and confirm or find you the correct one! Just let us know and our. parts specialist will help right away! Not sure will this part fit?.
- 89847572 Set of 12 New Holland Baler Rake Teeth Fits BB900 BB960R BR7060 27P etc - New Holland Balers: 585, BB900, BB930AR, BB940R, BB940AR, BB960R, BB960AR, BB9050R, BB9060R, BB9070R, BB9080R, BR7060, BR7070, BR7080, BR7090. Replaces New Holland Part Number: 89847572. New Holland Windrower Pick-up Headers: 27P, 270FP, 280FP, 290FP, 340W, 345W, 346W, 350W, 355W, 356W, 365W, 366W, 890W, 990W.
- 850614 Ford New Holland Hay Rake Right Hand Teeth 216 & 258 - Set of 10 - Replaces New Holland Part Numbers: 139041, 850614. New Holland Balers: 216, 258 with right-hand hook, 259 Rolabar Rake. Right-hand rake teeth. Tine length from mounting hole: 10". Heat treated tines for long lasting performance.
- Universal Rake Tooth Replaces AE24953 AE47389 65609 and 850612 -Set of 10 - Replaces John Deere Part Numbers: AE24953, AE47389. Replaces New Holland Part Numbers: 65609, 850612. Most Round Bar and Parallel Bar Rakes with 1-5/8" bar. Tine length from mounting hole: 10". Heat treated tines for long lasting performance.
- 9 1/2" OD X 2 5/8" Wide Pulley - New Pulley. Weight: 3.7 Lbs. with 4 mounting holes.
- 9 1/2" OD X 1 1/8" Wide Pulley - New Pulley. Weight: 5.95 Lbs.
- 9" OD X 3 1/8" Wide Pulley - New Pulley. Weight: 6.27 Lbs.
- 6" OD X 1 5/8" Wide Pulley - New Pulley. Weight: 2 Lbs. Inside groove 1 1/8" wid.
- 5" OD X 7/8" Wide Single Groove Pulley - New Pulley. Weight: 1.54 Lbs. Key-Way 5/16" width.
- 2) 15x6.00-6 Hay Tedder Farm Implement AG TIRE RIB 10ply T-L 1,015 lb capacity - Maximum Weight Carrying Capacity: 1,015 lbs. & 10 m.p.h. Tread Depth: 4/32 Load Index: 69 / A3. NOTE:NHS N on H ighway S ervice Tire.
- Sitrex Hay Tedder Tine Arm Code S200.403 Fits ST520 Hay Tedder - Mounting holes 4-1/4" on center, center of first hole 5/8" from edge. Radiused tine mounting end for extra strength. Part Number: Replaces S200.403. Ohio Residents Only.
- New Holland 68 Hayliner Decals
- Sitrex Hay Tedder Tine Arm fits 2GL Tedders Code 200.404 - These are the old Style Tine Arms without the added brace. Mounting holes 6-1/4" on center, center of first hole 5/8" from edge. Radiused tine mounting end for extra strength, powder coated paint. Ohio Residents Only.
- Sitrex Hay Tedder Tine Arm New Style With Brace 230.926 Fits RT5800H - These are the New Style Tine Arms with the added brace to help with breakage and twisting. Mounting holes 6-1/4" on center, center of first hole 5/8" from edge. Radiused tine mounting end for extra strength, powder coated paint.
- Sitrex Hay Tedder Tine Arm New Style With Brace S250.402 Fits 5200 Series - These are the New Style Tine Arms with the added brace to help with breakage and twisting. Mounting holes 6-1/4" on center, center of first hole 5/8" from edge. Radiused tine mounting end for extra strength, powder coated paint.
- R18030627 Tine Washer, Fits Hesston Model 3710, 3717, 3740 and 3750 Hay Tedders - R18030627 Tine Washer. Replaces Part Number: R18030627. This trapezoid shaped tine washer is 38mm long and 36mm wide at the front and 38mm wide at the rear with a 12mm center hole and is 7mm thick. Tine Washer Specifications.
- R18030627 Tine Washer, Fits New Idea Model 4210, 4217, 4227, 4240 Hay Tedders - R18030627 Tine Washer. Replaces Part Number: R18030627. This trapezoid shaped tine washer is 38mm long and 36mm wide at the front and 38mm wide at the rear with a 12mm center hole and is 7mm thick. Tine Washer Specifications.
- R18030627 Tine Washer, Fits Massey Ferguson Models 1610 & 1617 Hay Tedders - R18030627 Tine Washer. Replaces Part Number: R18030627. This trapezoid shaped tine washer is 38mm long and 36mm wide at the front and 38mm wide at the rear with a 12mm center hole and is 7mm thick. Tine Washer Specifications.
- Galfre Double Yoke for Hay Tedders Fits GTS 480/ GTS 520 Series Code 0057NGTS - One side is 1-3/8" with 6 Splines the other is a 30mm smooth bore with key. Replaces Code 0057NGTS.
- 48138 Hay Rake Cam Follower Bearing Fits New Holland,Massey Ferguson,JD TB7623 - Massey Ferguson Models. New Holland Models. OD: 1-7/8", OL: 2-1/8", Thread length: 1-1/2", Thread: 3/4". Tine Bar Bearing for Rakes. 700 for early models; rakes with bearing/flange update use 114683.
- S200.402 Sitrex Hay Tedder Tine Washer, Fits Model St, RT, G & GL Hay Tedders - This trapezoid shaped tine washer is 38mm long and 36mm wide at the front and 38mm wide at the rear with a 12mm center hole and is 7mm thick. S200.4023 Tine Washer. Tine Washer Specifications Replaces Part Number: S200.402.
- Heavy Duty Circlip for DaRos Hay Tedder, replaces code 9130012 - Part Number: 9600012. Ohio Residents Only.
- Kuhn Hay Rake Tedder Tooth 12.875" Tines x 2.75" Coil x 3.625" Tine Gap 58561900 - Kuhn Rake / Tedder tooth. The tine length is 12.750". Coil O.D. is 2.750" and tine gap measures 3.625". Fits Kuhn hay tedders and rakes.
- Rake Tooth 8.75" Tine x 3.5" Tine Gap x 1-11/16" Tine Spring Hole R15080 Farmer - Replaces OEM #: R15080. Replaces OEM #: 96IH22A. Tine length: 8.75". Tine gap: 3.5".
- Rake Tooth 7.75" Tine x 3.625" Tine Gap x 1-13/16" Coil Diameter IH22-2 Farmer - Fits Model 5 Side 1952 - Later. Replaces OEM #: 455165R1.
- Double Tine Rake Tooth 5.25" Tines x 4.5" Wide w/ 1.845" Coil 400341 Farmer - FH2 Double Tine Rake Teeth 5.25" Tines x 4.5" Wide w/ 1.845" Coil. Fits Farmhand F76 Morrell.
- Double Rake Tooth 6.25" Tine x 2.25" Coil x 5" Tine Gap w/ 0.244 Wire 146545 - Double Rake Teeth 6.25" Tine x 2.25" Coil x 5" Tine Gap w/ 0.244 Wire.
- Single Tine Rake Tooth 6-3/4" Tine x 2-7/16" Coil w/ 3-11/16" Hook 107058 Farmer - Single prong Rakes: 508 Series: 14-185, 14-186, 14-187, 14-201, 14-202.
- Double Rake Tooth 7.5" Tine x 4.125" Tine Gap x 1.5" Coil w/ 0.225 Wire R740S - Hay Rake Parts: 169. Mower Conditioner Parts: 170 (MY 1939>). Replaces Part # R-740S. Fits 169 Rake. Fits 70 Rake (1939 & Newer). Tooth length measures 7.5" Tine gap is 4.125" Coil O.D. is 1.5".
- Rake Tooth 7.125" Tine x 2.1875" Coil x 3.75" Hook w/ 0.244" Wire T17350 Farmer - Fits Rake / Tedder(s) 281. Replaces OEM #'s: 96C1. Replaces OEM #'s: T17350, TEC1. Tine length: 7.125". End of hook to end of coil: 3.75". Coil diameter: 2.187".
- Rake Tooth 7.25" Tine x 0.9375" Coil x 2.5" Hook w/ 0.262 Wire MF-1 Farmer Bob's - Fits Models 25, 36 & 37 rakes Replaces part # 66753MO 9-7/16 in. L x 1-1/16 in. W 0.262 wire Black.
- Double Rubber Mount Rake Tooth 5.25" Tines x 2.375" Tine Gap RMT883 Farmer Bob's - Double Rubber Mount Rake Teeth 5.25" Tines x 2.375" Tine Gap x (2) - 5/16" Holes x (1) - 3/8" Hole. RMT883 Tine Balers LB333R, LB433R, LBX331R, LBX332R, LBX421R, LBX431R, LBX432R. Windrower pick-up head HDX20P. Balers 585, BB900, BB930AR, BB940R, BB940AR, BB960R, BB960AR, BB9050R, BB9060R, BB9070R, BB9080R. Windrower pickup heads 29P, 270FP, 280FP, 290FP, 340W, 345W, 346W, 350W, 355W, 356W, 365W, 366W, 990W.
- Rubber Mount Rake Tooth 7" Tine x 1.625" Yoke Opening x 3/8" Holes RMT8 Farmer - Hay Rake Parts: 700, 705. Hay Rake Parts: R-21, R-23, R-23A, R-24, R-24A, R-9. Heat treated tines for long lasting performance. Consistent rubber quality assured by injection molding. Hook style head for maximum rubber adhesion. Yoke opening: 1-5/8". Bolt hole diameter: 3/8". Tine length from mounting hole: 10". Tine diameter: 9/32". Models: 700, 705.
- Double Rubber Mounted Rake Tooth 7.25" Tine x 5/16" Bolt Hole w/ 0.25" Wire - • Heat treated tines for long lasting performance • Consistent rubber quality assured by injection molding • Hook style head for maximum rubber adhesion • Yoke height: 1-3/8" • Bolt hole diameter: 5/16" • Tine length from bottom of yoke: 7-1/4" • Tine diameter: 1/4".
- 5 of Rubber Mount Rake Teeth 6" Tine x 1.25" Yoke Opening x 5/16" Holes 300411 - Gold Series - Specialty. Life-cycle tested to OEM-type Specifications. Hardened-steel tine - High grade rubber, no re-grind - High grade chemical adhesives. Yoke opening: 1-1/4". Bolt hole diameter: 5/16". Tine length from mounting hole: 8".
- Rubber Mount Rake Tooth 6" Tine x 1.25" Yoke Opening x 5/16" Holes 300411 Farmer - Gold Series - Specialty. Life-cycle tested to OEM-type Specifications. Hardened-steel tine - High grade rubber, no re-grind - High grade chemical adhesives. Yoke opening: 1-1/4". Bolt hole diameter: 5/16". Tine length from mounting hole: 8".
- 5 of Rubber Mount Rake Teeth 5.5" Tine x 1.125" Yoke Opening x 5/16" Holes - Fits Lockwood, Innes, Picket for Bean Windrowers. Yoke Opening is 1-1/8" Yoke Opening x 5/16" Yoke Hole Diameter x 1/4" Diameter.
- Rubber Mount Rake Tooth 5.5" Tine x 1.125" Yoke Opening x 5/16" Holes 300411 - Fits Lockwood, Innes, Picket for Bean Windrowers. Yoke Opening is 1-1/8" Yoke Opening x 5/16" Yoke Hole Diameter x 1/4" Diameter.
- RH Rubber Mounted Rake Tooth 10" Tine x 3/8" Holes x 1.8593" Yoke Opening RMT-2 - RMT-2 Rubber Tooth • Heat treated tines for long lasting performance. • Consistent rubber quality assured by injection molding. • Hook style head for maximum rubber adhesion. • Yoke opening: 1-55/64". • Bolt hole diameter: 3/8". • Tine length from mounting hole: 10". • Tine diameter: 9/32. Applications • Models: 216 & 258 with Right Hand Hook, 260 Rolabar Rake.
- LH Rubber Mounted Rake Tooth 10" Tine x 3/8" Holes x 1.8593" Yoke Opening RMT-3 - RMT-3 Rubber Rake Tooth • Heat treated tines for long lasting performance • Consistent rubber quality assured by injection molding • Hook style head for maximum rubber adhesion • Yoke opening: 1-55/64". • Bolt hole diameter: 3/8". • Tine length from mounting hole: 10". • Tine diameter: 9/32. Applications • Models: 216 & 258 with Left Hand Hook, 259 Rolabar Rake.
- 5 of LH Rubber Mounted Rake Teeth 10" Tine x 3/8" Holes x 1.8593" Yoke Opening - RMT-3 Rubber Rake Tooth • Heat treated tines for long lasting performance • Consistent rubber quality assured by injection molding • Hook style head for maximum rubber adhesion • Yoke opening: 1-55/64". • Bolt hole diameter: 3/8". • Tine length from mounting hole: 10". • Tine diameter: 9/32. Applications • Models: 216 & 258 with Left Hand Hook, 259 Rolabar Rake.
- Rubber Mount Rake Tooth 7" Tine x 1.625" Hook x 3/8" Hole x 3/8" Slot Hole UST-1 - Fits most round bar and parallel bar rakes with 1 5/8" bar. Yoke is punched with 3/8'' diameter hole on one side and 3/8'' diameter slotted hole on other side for a universal fit. JD Models: 54, 64, 74, 350, 640, 650, 652, 660, 662, 670, 672, 858A, 894, 894A, 896, 896A Not for use on models with Vertical Mounting Studs JD Models: 56, 57, 256 Also fits many other models. Will replace OEM#s: 65609, 850612.
- Hay Rake Tooth 5.25" Double Tine x 2.5" Tine Gap x 1.50" Coil HE-6 Farmer Bob's - Fits Baler(s) 8420 Fits Baler(s) RB34 Fits Baler(s) 530, 730, 830, 1734, 5134, 5510, 5530, 5540, 5545, 5580, 5580E, 5585 Replaces OEM nos 1710102, 2700222 Fits Baler(s) 1734 Fits Baler(s) 4643, 6243, 6343 Replaces OEM nos 96HE6, TEHE6, 01710102 (A) Overall Length: 6.750" (B) Tine Gap: 2.5" (C) Coil Diameter: 1.5".
- Hay Rake Tooth 6" Double Tine x 3.5" Tine Gap x 1.875" Coil 611181 Farmer Bob's - Mower conditioners/windrowers 475, 555, 575, 650, 655, 1075, 1150, 1255, 8320, 8330, 8340, 8820 and 8830. Conditioners 2130, 2160, 2230 and 2262. Conditioners/windrowers PT-7, PT-10, PT-12, 320, 420, 500, 520, 620, 1010, 1014, 1070, 1085, 1090, 1091, 1095, 1110, 1120, 1130, 1150, 1160, 6200, 6400, 6450, 6465, 6566, 6600, 6610, 8100 and 8200. Replaces No 750075 Replaces No 6111181 Replaces No 750075, 611181.
- Hay Rake 6.125" Double Tine x 4.3125" Gap x 1.5" Coil F-2C Farmer Bob's Parts - Fits 350, 504, 506, 509, 520, 532, 540 & 541 Balers. 0.187" Thickness.
- 10 of Replacement Hay Rake 6.125" Double Tine x 4.3125" Gap x 1.5" Coil F-2C - Fits 350, 504, 506, 509, 520, 532, 540 & 541 Balers. 0.187" Thickness.
- Hay Rake Tooth 7.5" Tines x 3.625" Gap x 1.562" Coil x 0.244 Wire NI-2 Farmer - Fits Rake(s) 4, 44, 45G Replaces OEM #'s: 96NI2, 048ME, PMNI-2, TENI2, TENI2C Tine Length: 7.5" Tine Gap: 3.625" Coil Diameter O.D.: 1-9/16".
- Hay Rake Tooth 7" Tine x 3.625" Hook x 2.25" Coil x 0.244 Wire NI-1 Farmer Bob's - Hay Rake Teeth 7" Tine x 3.625" Hook x 2.25" Coil x 0.244 Wire.
- 40 of Tonutti LH Wheel Rake Tine 5.25" x 13" x 17.25" Curved End w/ 0.250 Wire - 40 of Tonutti LH Wheel Rake Tine 5.25" x 13" x 17.25" Curved End w/ 0.250 Thick Wire.
- Tonutti LH Wheel Rake Tine 5.25" x 13" x 17.25" Curved End w/ 0.250 Thick Wire - Tonutti LH Wheel Rake Tine 5.25" x 13" x 17.25" Curved End w/ 0.250 Thick Wire.
- 40 of Tonutti RH Wheel Rake Tine 5.25" x 13" x 17.25" Curved End w/0.250 Wire - 40 of Tonutti RH Wheel Rake Tine 5.25" x 13" x 17.25" Curved End w/ 0.250 Wire.
- Tonutti RH Wheel Rake Tine 5.25" x 13" x 17.25" Curved End w/ 0.250 Thick Wire - Tonutti RH Wheel Rake Tine 5.25" x 13" x 17.25" Curved End w/ 0.250 Wire.
- 40 of OTMA Wheel Rake Tine 6.5" x 11.5" x 15" Curved End w/ 0.281 Thick Wire - Replaces Atlas OEM nos 203055 Replaces H+S OEM nos 96OT1 Replaces Koehn OEM nos 3737507, 3637507 Replaces Otma OEM nos OT-1, OT1 Replaces Sitrex OEM nos TEOT1E, TEOT1, TES1E (A) Hook to offset length: 15" (B) Offset length: 11.5" (C) Bottom tine length: 6.5" Tooth diameter: 0.262".
- OTMA Wheel Rake Tine 6.5" x 11.5" x 15" Curved End w/ 0.281 Thick Wire OT1A - OT-1A Wheel Rake Replacement Tooth. Has .281 wire, cream color, measures 6.5" x 11.5" x 15". Fits Otma, H&S, Sitrex, and Atlas wheel rakes.
- OTMA Wheel Rake Tine 6.5" x 11.5" x 15" Curved End w/ 0.262 Thick Wire OT1 - Replaces Atlas OEM nos 203055 Replaces H+S OEM nos 96OT1 Replaces Koehn OEM nos 3737507, 3637507 Replaces Otma OEM nos OT-1, OT1 Replaces Sitrex OEM nos TEOT1E, TEOT1, TES1E (A) Hook to offset length: 15" (B) Offset length: 11.5" (C) Bottom tine length: 6.5" Tooth diameter: 0.262".
- Tonutti Tedder Tine Arm, Haymaster Tedder Tine Arm Gt540 Tedder - Ohio Residents Only.
- Double Teeth Tedder Tines 15.375" Tines x 3.50" Gap x 2.75" Coil KT-1 Farmer - Replacement Tedder Teeth. 3.50" Tine Gap 15.375" x 3.50" Tine Gap x 2.75" Coil Width Replaces Part Number: 0109040.
- Single Steel Rake Tooth Replaces 850, 858, 896, 851, 24 & 216 257SE Farmer Bob's - Tooth coil measures 2.187" tine length is 7" coil to hook measures 3.625". Fits rakes 350, 851, 858, 894, 896.
- 25 Right Hand Rake Teeth Fits Ford/Fits New Holland 216 258 259 260 56B - May also fit Gearmore Basket Rake Models: 2027-G2, 2030-G2. Fits Massey Ferguson - 25, 36, 37. Allen - Right Hand Rakes. Replaces Part Numbers 10" Tine Length From Mounting Hole. 1-55/64" Yoke Opening.
- Rubber Mount Rake Tooth 7" Tine x 1.625" Yoke Opening x 3/8" Holes RMT7 Farmer - RMT-7 Rubber Rake Tooth • Heat treated tines for long lasting performance. • Consistent rubber quality assured by injection molding. • Hook style head for maximum rubber adhesion. • Yoke opening: 1-5/8". • Bolt hole diameter: 3/8". • Tine length from mounting hole: 10". • Tine diameter: 9/32". Replaces Models: 70, 71, 640, 650, 652, 660, 662, 670, 671, 672, 673, 896A.
- Double Rake Tooth 16.5" Tine x 15.43" Tine x 1.65" Coil x 4.37" Tine Gap PZ-6 - Double Rake Teeth 16.5" Tine x 15.43" Tine x 1.65" Coil x 4.37" Tine Gap w/ 0.375" Wire.
- Rake Tooth 7" Tine x 2.25" Coil x 3.75" Hook w/ 0.244" Wire AC-1 Farmer Bob's - Single Rake Tooth Side Delivery Parallel Bar Replaces 531727, NI2D, 0782ME, 400033, 531727, AC-1 & 0633ME.
- Rake Tooth 6.625" Tine x 1.812" Coil x 3.25" Hook w/ 0.262 Wire 500629E Farmer - Replaces Part# 500629E Tine: 6.625" Hook: 3.250" Coil: 1.812" Fits 107 Rotor Bar Rakes.
- Double Rake Tooth 5.25" Tine x 1.845" Coil x 4.5" Tine Gap w/ 0.281" Wire 2117RH - Fits Rake / Tedder(s) F-76 Replaces OEM nos 2117RH, L2117R Fits Rake / Tedder(s) 404 (1065-later) Replaces OEM nos 400341 Replaces OEM nos 491478R1 Replaces OEM nos 96FH2 Tine Length: 5.25" Tine Gap: 4.50" Coil Diameter: 1.845" Bolt Hole Diameter: .375" Tine Diameter: 0.281".
- Pollard Hay Rake Tooth 6.25" Tine x 1.6875" Coil x 3.75" Hook w/ 0.262" Wire - Replaces Pollard OEM #: 1706 Tine Length: 6.250". Coil Diameter: 1.687".
- Kuhn Tedder Teeth 12.5" Tine x 2.75" Coil x 3.625" Hook w/ 0.375 Wire 576 090 00 - Kuhn Models 24T, GF22N, GF4000, GR5000, GRS24, GRS24T, GF222T, GF22NP, GF22NT, GF3701, GF4000M, GF4000T, GF4201MH, GF440M, GF440P, GF440S, GF440SRP, GF440T, GF5000H, GF5000M, GF5000MH, GF5000MHA, GF5000T, GF5001MH, GF5001MHA, GF5001T, GF5001VT, GF5001VTH, GF6000, GF6000MH, GF6001MH, GF6301MH, GF6301MHO, GF7000T, GF7001T, GRS24, GRS24T.
- New Idea 404 Hay Rake Arm Adjustment Washer - Good useable part They do have some light wear. Still have lots of life left. This is for the arm adjustment and to hold arm on the frame.
- Caroni Finish Mower TC590N, TC710N 135mm Double belt Pulley w/ 25mm bore - Caroni 59010500 for Finish Mowers TC590N, TC710N. Also replaces SICMA, Phoenix, First Choice, Kioti, WAC, 130 mm Central Driven Double Pulley for 60" & 72" Finish mowers. Phoenix - for M60 and M72 finish mowers 5002717.
- 7" Tine x 3-7/8" x 2-3/8" Diameter Coil Hay Rake Tooth 64562 Farmer Bob's Parts - Hay Rake Tooth, 262 wire, yellow, Fits Models 55, 56 and 57 Rakes and Models 256, 258, 259 and 260 Rotobars.
- Farmhand Hay Rake Wheel Cap - Good useable part came off a f5 farmhand rake will fit other models also. They do have some wear. Still have lots of life left.
- Befco Oil Seal ReplacesCode 000-2295 - Tornado RMD-260 & 272. Ohio Residents Only. We are located at: Brooks Ag Parts LLC. Cyclone Super Flex 417 & 420. Turbo-Hop 302.
- Galfre / WAC Replacement Grease Seal Code 0016NGST - Ohio Residents Only.
- Ball Bearing- 30x55x13 code: 6006-2RSR - This bearing is for use in applications that involve combined radial and axial loads, and a need for high running accuracy at high rotational speeds.
- Bearing for Galfre Hay Tedder, replaces codes 0063GS - These bearings are rubber sealed on both sides They are used on the vertical shaft that runs through each spinner of the tedder and two are used in each spinner or basket gear. Ohio Residents Only.
- 25 Rubber Mounted RH 850614 96R24 Teeth Fits New Holland 258 260 Balers - 850614, 96R24, PMNH850614R, RTIANH-R, RTIANHR, HR-0168, 850614-IMP. 216, 258, 259, 260 Rolabar, 56B. Hardened-steel tine - High grade rubber, no re-grind - High grade chemical adhesives. Oil Plug SBA398430560 Fits Ford Fits New Holland 1000 1500 1600 1700 1900 1910 2 (# 401706136181 ).
- Bearing for Galfre Hay Tedder, replaces codes 0033GS and 0099GS - Part Number 0033GS / 0099GS. They are used on the horizontal shaft that runs through the body of the tedder and are installed in each of the inside gearbox housings. There are the new style bearings for the housing or bearing support that use this larger bearing.
- HR-0169 Pack of Forty Rake Teeth Fits Gearmore 2030-G2 Fits MF 580848M91 96R23 - Fits Gearmore Rake Model(s): 2027-G2, 2030-G2. HR-0169, RTIANH-L, RTIANHL, 580848M1, 580848M91, 65668, 65668NHGV, 80850613, 850613, 850613BDS, 850613DS, PMNH850613L. Fits Allen Model(s): Left-Hand Rake.
- (10) - Rubber Rake Teeth Fits Ford New Holland 56 57 256 & 850612 - Fits Ford/New Holland Hay Rake Models Yoke Width 1-11/16". Oil Plug SBA398430560 Fits Ford Fits New Holland 1000 1500 1600 1700 1900 1910 2 (# 401706136181 ). Never had better service since 2007. 15 AMP STATOR KIT fits KOHLER 237878-S / K301 K321 K341 P7-01710 (# 324066474057 ).
- Series 2 Torque Limiter PTO shaft 1-3/8" X 6 Spline TE and 1-3/8" X 6 Spline IE - Made in Italy. Part Number: TX2-711-LN2. Ohio Residents Only.
- Nut and Washer to Mount Tires and Wheels to Galfre Tedder 0042NGTS / 0043NGTS - We are located at: Brooks Ag Parts LLC.
- 15.0 X 6.0-6 Tedder Tire and Wheel, Fits Hay Master Hay Tedders - Features a wide flotation 6 ply rated tire with tube, replaceable ball bearings with a 25mm bearing bore and 2" bearing width that are positioned flush with the ends of the hub. Fits most Hay Master Hay Tedders with 2" wide wheel hub.
- Farmhand Wheel Rake Wheel Mounting Arms. #2 - Farmhand Wheel Rake Wheel Mounting Arms are A different style. Condition is Used. They do have some light wear but still very useable. They have been built up by welding since they had some wear Take a look at the photos. will give shipping discount if you buy more than one. Shipped with USPS First Class Package.
- 35mm External Circlip Standard Duty Set of 5 - Make sure we have the right item for your needs!
- Circlip for Galfre DIsc Mowers code 02.0004.0012.00 - Galfre Disc Mower circlip code 02.0004.0012.00 used on All Galfre Disc Mowers. The circlip can be seen in position 20 of the exploded view. make sure we have the right item for your needs!
- Circlip for Galfre / First Choice GS Series Hay Tedder code 0088GS - Galfre Hay Tedder circlip code 0088GS used on GS Series Galfre Hay Tedders and First Choice Hay Tedders. This circlip is shown in position 88 in the exploded view of the tedder manual.
- Circlip for Galfre / Walton GTS Series Hay Tedder code 0064NGTS - Galfre Hay Tedder circlip code 0064NGTS used on GTS Series Galfre Hay Tedders and WT Series Walton Hay Tedders. This circlip is shown in position 64 in the exploded view of the tedder manual. make sure we have the right item for your needs!
- Circlip for Galfre / Walton GTS Series Hay Tedder code 0004NGTS - Galfre Hay Tedder circlip code 0004NGTS used on GTS Series Galfre Hay Tedders and WT Series Walton Hay Tedders. This circlip is shown in position 4 in the exploded view of the tedder manual. make sure we have the right item for your needs!
- 2888001 Set/40 Rubber Baler Teeth for Vermeer R-21 R-23 R-23A Fits John Deere 70 - BHM90-0001, 2888001, 96R5, AE56204. Fits John Deere Models 3/8" Bolt Hole. 10" Tine Length from Mounting Hole. High grade rubber, no re-grind - High grade chemical adhesives - Hardened-steel tine. 15 AMP STATOR KIT fits KOHLER 237878-S / K301 K321 K341 P7-01710 (# 324066474057 ).
- Key for Befco Hay Tedder Transmission Shaft code 502 605B - See position 30 in the parts schematic drawing.
- Key for Galfre / First Choice GS Series Tedder Transmission Shaft Code 0030GS - See position 30 in the parts schematic drawing.
- 502 627B Flat Oval Tine Washer for Befco Hay Tedder - This oval shaped tine washer is 30mm x 40mm with a 12mm center hole and is 6.3mm thick. Replaces Part Number: 502 627B. Tine Washer Specifications Oval Shaped. Ohio Residents Only. Thickness: 6.3MM.
- Vertical Gear for Befco Hay Tedder Model 320, 400 & 500 - This gear has 22 teeth with a flange with 4 threaded holes for the pan to mount that holds the tine arms. The axle assembly mounts to the shaft (not included) that runs through this gear. make sure we have the right item for your needs!
- Split Pin for Galfre Hay Tedder, Code 0055NGTS Holds Yoke to Transmission Shaft - Replaces code 0055NGTS.
- 100 Rake Teeth 64562 w/ Mounting Hardware 792493K Kit Fits Rolabars 256 258 259 - Fits New Holland Models: 55, 568 and 57 Rakes & Models 256, 258, 259 and 260 Rolabars. Replaces Part Numbers: 280744, HD38NCNUT, 804792493, 804-792493, 792493, 792493K. Replaces Part Numbers: 400033, 33549, 80464562, 804-64562, PMNH-1A, 46993, 64562, 96NH1A, TENH1A, TENI2D.
- Farmhand Wheel Rake Hub And Spindle - Farmhand Wheel Rake Hub And Spindle. Condition is Used. Is off an older farmhand wheel rake. Has some light surface rust bearings are in good condition don’t sound dry. Threads in hub are good Shipped with USPS First Class Package.
- (25) VI-1 .262" Wheel Rake Teeth Tine 6" X 10" X 17 1/2" Fits John Deere - (25) Twenty Five VI-1. 262" Wheel Rake Teeth Tine 6" X 10" X 17 1/2" Fits John Deere. These are new wheel rake teeth. They are 6"X 10 X 17 1/2". This sale is for 25 teeth. Used parts are sold as is unless specified otherwise.
- (10) VI-1 .262" Wheel Rake Teeth Tine 6" X 10" X 17 1/2" Fits Vicon,John Deere - These are new wheel rake teeth. They are 6"X 10 X 17 1/2". This sale is for 10 teeth. Used parts are sold as is unless specified otherwise.
- 36133 VI-1 .262" Wheel Rake Teeth Tine 6" X 10" X 17 1/2" Fits Vicon,John Deere - These are new wheel rake teeth. They are 6"X 10 X 17 1/2". Used parts are sold as is unless specified otherwise.
- (25) Twenty-Five VI-1H .275" Wheel Rake Teeth Tine 6" X 10" X 17 1/2" Fits Kuhn - These are new wheel rake teeth. They are 6"X 10 X 17 1/2". This sale is for 25 teeth. Used parts are sold as is unless specified otherwise.
- (10) VI-1H .275" Wheel Rake Replacement Teeth Tine 6" X 10" X 17 1/2" Fits Kuhn - These are new wheel rake teeth. They are 6"X 10 X 17 1/2". This sale is for 10 teeth. Used parts are sold as is unless specified otherwise.
- (25) Twenty Five 6.5"x11.5"x15" Wheel Rake Teeth Tine Fits Otma,H & S,Sitrex,M&W - .262 6.5"x11.5"x15" Wheel Rake Tooth Tine Fits Otma,H & S,Sitrex,M&W,Rossi,Koehn. These are new wheel rake teeth.Teeth are 6 1/2" X 11 1/2" X 15". 262 wire,Painted Beige. Fits Otma, H & S, M&W, Rossi, Sitrex, Atlas and Koehn Wheel Rakes.
- (10) Ten 6.5"x11.5"x15" Wheel Rake Teeth Tine Fits Otma,H & S,Sitrex,M&W,Rossi - .262 6.5"x11.5"x15" Wheel Rake Tooth Tine Fits Otma,H & S,Sitrex,M&W,Rossi,Koehn. These are new wheel rake teeth.Teeth are 6 1/2" X 11 1/2" X 15". 262 wire,Painted Beige. Fits Otma, H & S, M&W, Rossi, Sitrex, Atlas and Koehn Wheel Rakes.
- Rake Tooth LH Rubber 40 Pack Fits New Holland 850613 Fits Massey Ferguson 25 36 - 850613, 65668, 580848M1, 580848M91, 96R23, HR-0169, PMNH850613L, RTIANHL, RTIANH-L, 65668K, 65668-IMP. Fits New Holland Rake / Tedder(s) 216, 258, 259, 56 Bean Rake, 57. Fits Massey Ferguson Rake / Tedder(s) 25 (S/N 419009907 & Later), 36 (S/N 012159 & Later), 37.
- 89847572 Set of 12 Baler Rake Double Teeth Fits Ford/New Holland, Fits Case IH - Replaces Part Numbers: 9847572, 89847572. Replaces Part Numbers: 89847572, 9847572. Fits Case IH Baler Models: LB333R, LB433R, LBX331R, LBX332R, LBX421R, LBX431R, LBX432R, RB454, RB464, RB564. Fits Ford/New Holland Baler Models: BB900, BB940AR, BB940P, BB940R, BB940S, BB960AR, BB960R, BB960S, BR7060, BR7070, BR7090, 585.
- International Harvester McCormick PULL TYPE HAY RAKE GROUND DRIVE 5 Bar
- 10 of Rake Teeth 7.75" Tine x 3.625" Tine Gap x 1-13/16" Coil Diameter IH22-2 - Fits Model 5 Side 1952 - Later. Replaces OEM #: 455165R1.
- New Holland 326 Baler Decals - These decals are yellow vinyl cut.
- (10) Fits International 5 Bar Hay Rake Tooth Teeth Replaces 457374R1,462978R1 - Used parts are sold as is unless specified otherwise.
- (5) Fits International 5 Bar Hay Rake Tooth Teeth Replaces 457374R1,462978R1 - Used parts are sold as is unless specified otherwise.
- Qty of 5 96R45 John Deere Vermeer Rubber Rake Tooth VR2888001 - John Deere Balers: 700, 705. Replaces John Deere Part Number: AE56204.
- Qty 10 850614, 139041-K, 139041-KGV, 139041KGV, BR850614IMP Rubber Rake Teeth - Replaces Part Numbers: 850614, 139041-K, 139041-KGV, 139041KGV, BR850614IMP. Ford New Holland Rake Models: 256 (late, With heavy bar), 258, 259, 260, 56B. Also made to fit Massey Ferguson Rake Models: 25, 36, 37.
- 65668-IMP 850613-IMP Left Hand Rubber Rake Teeth Qty of 10 - Rubber rake tooth, fits New Holland 259 Rolobar rakes. Also fits New Holland 216 and 258 rakes; Allen and TwinStar rakes with left hand hook. Tine length from mounting hole: 10".
- 10 of Rake Teeth 8.75" Tine x 3.5" Tine Gap x 1-11/16" Tine Spring Hole R15080 - Replaces OEM #: R15080. Replaces OEM #: 96IH22A. Tine length: 8.75". Tine gap: 3.5".
- Bull Dog 500338 Drop Leg Pin New, Replacement - Replaces Bull Dog Part Number 500338. Part Number - 500338. 1-0 toll free.
- New Holland 55 Rake Decals
- SICMA FIRST CHOICE 130 mm PULLEY for 60" & 72" Finish mowers, 5002718 - NEW SICMA, Phoenix, First Choice, Kioti, WAC, 130 mm Side Driven Single Pulley for 60" & 72" Finish mowers, Part number 5002718. Part number 5002718. Phoenix - fit M60 and M72 finish mowers. First Choice - fit model GM30-60 and GM-RD60 finish mowers.
- SICMA FIRST CHOICE 130mm Double belt Pulley for 60" & 72" Finish mowers, 5002717 - NEW SICMA, Phoenix, First Choice, Kioti, WAC, 130 mm Central Driven Double Pulley for 60" & 72" Finish mowers, Part number 5002717. Part number 5002717. Phoenix - for M60 and M72 finish mowers. First Choice - for model GM30-60 and GM-RD60 finish mowers.
- Tonutti Tedder Tine Arm, Haymaster Tedder Tine Arm Gt500 Tedder - Ohio Residents Only.
- Tonutti Tedder Tine Arm, Haymaster Tedder Tine Arm 2 Baskett Tedder - REPLACES OLD CODE 603061010 AND NEW CODE 2599200. Ohio Residents Only.
- New Holland 276 Rake Decals
- Farmhand Hay Rake Adjustment Washer - Good useable part came off a f5 farmhand rake will fit other models also. They do have some wear. Still have lots of life left.
- TUBE fits some Hay Tedder Bailer Tiller 3.50-8 350-8 4.00-8 400-8 TR-87 Valve - To avoid confusion we list All Tire sizes a tube will fit in the add for that tube. If you do not see your tire size listed in this add this tube will not fit your tire size. Can be used in one or two piece rims.
- 3 of Double Tine Rake Teeth 5.25" Tines x 4.5" Wide w/ 1.845" Coil 400341 Farmer - 3 of FH2 Double Tine Rake Teeth 5.25" Tines x 4.5" Wide w/ 1.845" Coil Fits Farmhand F76 Morrell.
- 3 Double Teeth Tedder Tines 15.375" Tines x 3.50" Gap x 2.75" Coil KT-1 Farmer - Set of 3 Replacement Tedder Teeth. 3.50" Tine Gap 15.375" x 3.50" Tine Gap x 2.75" Coil Width Replaces Part Number: 0109040.
- 2) 15x6.00-6 Hay Tedder Farm Implement AG TIRE RIB 6ply T-L 710 lb wt capacity - Maximum Weight Carrying Capacity: 710 lbs. & 10 m.p.h. Tread Depth: 4/32 Load Index: 69 / A3. NOTE:NHS N on H ighway S ervice Tire.
- 5 of Rubber Mount Rake Teeth 7" Tine x 1.625" Yoke Opening x 3/8" Holes RMT8 - Hay Rake Parts: 700, 705. Hay Rake Parts: R-21, R-23, R-23A, R-24, R-24A, R-9. Heat treated tines for long lasting performance. Consistent rubber quality assured by injection molding. Hook style head for maximum rubber adhesion. Yoke opening: 1-5/8". Bolt hole diameter: 3/8". Tine length from mounting hole: 10". Tine diameter: 9/32". Models: 700, 705.
- 5 of Double Rubber Mounted Rake Teeth 7.25" Tine x 5/16" Bolt Hole w/ 0.25" Wire - • Heat treated tines for long lasting performance • Consistent rubber quality assured by injection molding • Hook style head for maximum rubber adhesion • Yoke height: 1-3/8" • Bolt hole diameter: 5/16" • Tine length from bottom of yoke: 7-1/4" • Tine diameter: 1/4".
- 5 of Tedder Teeth 12.75" Tine x 3.125" Gap x 3.125" Coil Diameter FT1 Farmer - 5 of Tedder Teeth 12.75" Tine x 3.125" Gap x 3.125" Coil Diameter 5HPT82 T82 700003657.
- 5 of RH Rubber Mounted Rake Teeth 10" Tine x 3/8" Holes x 1.8593" Yoke Opening - RMT-2 Rubber Tooth • Heat treated tines for long lasting performance. • Consistent rubber quality assured by injection molding. • Hook style head for maximum rubber adhesion. • Yoke opening: 1-55/64". • Bolt hole diameter: 3/8". • Tine length from mounting hole: 10". • Tine diameter: 9/32. Applications • Models: 216 & 258 with Right Hand Hook, 260 Rolabar Rake.
- 10 of Hay Rake Teeth 6" Double Tine x 3.5" Tine Gap x 1.875" Coil 611181 Farmer - Mower conditioners/windrowers 475, 555, 575, 650, 655, 1075, 1150, 1255, 8320, 8330, 8340, 8820 and 8830. Conditioners 2130, 2160, 2230 and 2262. Conditioners/windrowers PT-7, PT-10, PT-12, 320, 420, 500, 520, 620, 1010, 1014, 1070, 1085, 1090, 1091, 1095, 1110, 1120, 1130, 1150, 1160, 6200, 6400, 6450, 6465, 6566, 6600, 6610, 8100 and 8200. Replaces - No 750075 Replaces - No 6111181 Replaces - No 750075, 611181.
- 10 of Pollard Hay Rake Teeth 6.25" Tine x 1.687" Coil x 3.75" Hook w/0.262" Wire - Replaces Pollard OEM #: 1706 Tine Length: 6.250". Coil Diameter: 1.687".
- 10 of Rake Teeth 6.625" Tine x 1.812" Coil x 3.25" Hook w/ 0.262 Wire 500629E - Replaces Part# 500629E Tine: 6.625" Hook: 3.250" Coil: 1.812" Fits 107 Rotor Bar Rakes.
- 10 of Rake Teeth 7.25" Tine x 0.9375" Coil x 2.5" Hook w/ 0.262 Wire 66753MO - Fits Models 25, 36 & 37 rakes Replaces part # 66753MO 10 of Rake Teeth 7.25" Tine x 0.9375" Coil x 2.5" Hook w/ 0.262 Wire.
- 3 of Double Rake Teeth 6.25" Tine x 2.25" Coil x 5" Tine Gap w/ .244 Wire 146545 - 3 of Double Rake Teeth 6.25" Tine x 2.25" Coil x 5" Tine Gap w/ .244 Wire.
- 10 of Single Tine Rake Teeth 6-3/4" Tine x 2-7/16" Coil w/ 3-11/16" Hook 107058 - Single prong Rakes: 508 Series: 14-185, 14-186, 14-187, 14-201, 14-202.
- 3 of Double Rake Teeth 7.5" Tine x 4.125" Tine Gap x 1.5" Coil w/ 0.225 Wire - Mower Conditioner Parts: 170 (MY 1939>). Replaces Part # R-740S. Fits 169 Rake. Fits 170 Rake (1939 & Newer). Tooth length measures 7.5" Tine gap is 4.125" Coil O.D. is 1.5".
- 10 of Rake Teeth 7.125" Tine x 2.1875" Coil x 3.75" Hook w/ 0.244" Wire T17350 - Fits Rake / Tedder(s) 281. Replaces OEM #'s: 96C1. Replaces OEM #'s: T17350, TEC1. Tine length: 7.125". End of hook to end of coil: 3.75". Coil diameter: 2.187".
- 15 of Rake Teeth 7" Tine x 2.25" Coil x 3.75" Hook w/ 0.244" Wire AC-1 Farmer - 15 of Single Rake Tooth Side Delivery Parallel Bar Replaces 531727, NI2D, 0782ME, 400033, 531727, AC-1 & 0633ME.
- 3 of Right Handed Tedder Teeth Fits Sitrex & More Tedders 210574 Farmer Bob's - 3 of Right Handed Tedder Teeth Fits Sitrex & More Tedders. Replaces: 200401SITREX 210.574SITREX 210574SITREX 3013-8107ATLANTIC QUALITY PARTS Crossed From: 0300116MISCELLANEOUS Fits the following makes and models: Sitrex HAY TEDDER: RT5200.
- 3 of Double Rake Teeth 16.5" Tine x 15.43" Tine x 1.65" Coil x 4.37" Tine Gap w/ - 3 of Double Rake Teeth 16.5" Tine x 15.43" Tine x 1.65" Coil x 4.37" Tine Gap w/ 0.375" Wire.
- 3 Kuhn Tedder Teeth 12.5" Tine x 2.75" Coil x 3.625" Hook w/ 0.375 Wire 576 090 - Kuhn Models 24T, GF22N, GF4000, GR5000, GRS24, GRS24T, GF222T, GF22NP, GF22NT, GF3701, GF4000M, GF4000T, GF4201MH, GF440M, GF440P, GF440S, GF440SRP, GF440T, GF5000H, GF5000M, GF5000MH, GF5000MHA, GF5000T, GF5001MH, GF5001MHA, GF5001T, GF5001VT, GF5001VTH, GF6000, GF6000MH, GF6001MH, GF6301MH, GF6301MHO, GF7000T, GF7001T, GRS24, GRS24T.
- 3 of Kuhn Hay Rake Tedder Tooth 12.875" Tines x 2.75" Coil x 3.625" Tine Gap - Kuhn Rake / Tedder tooth. The tine length is 12.750". Coil O.D. is 2.750" and tine gap measures 3.625". Fits Kuhn hay tedders and rakes.
- 10 of Double Rubber Mount Rake Teeth 5.25" Tines x 2.375" Tine Gap RMT883 Farmer - 10 of Double Rubber Mount Rake Teeth 5.25" Tines x 2.375" Tine Gap x (2) - 5/16" Holes x (1) - 3/8" Hole. RMT883 Tine Balers LB333R, LB433R, LBX331R, LBX332R, LBX421R, LBX431R, LBX432R. Windrower pick-up head HDX20P. Balers 585, BB900, BB930AR, BB940R, BB940AR, BB960R, BB960AR, BB9050R, BB9060R, BB9070R, BB9080R. Windrower pickup heads 29P, 270FP, 280FP, 290FP, 340W, 345W, 346W, 350W, 355W, 356W, 365W, 366W, 990W.
- 10 Pack Replacement Rake Teeth Clip Kit Clips, Bolts, Nuts & Lock Washers - Kit is for 1 prong teeth Models: 55, S55, 56, 57, 256, 259, 260, 495; Replaces: 792493, 33970, 691699.
- 50 of 792493K & NH1A Rake Teeth Kit Fits 256, 258, 259 & 260 Roto Bars 792493K - - One New Aftermarket Replacement Set of 50 Hay Rake Teeth / Tines and 50 Hold Down Clips, Nuts & Bolts made to fit Rake models: 55, 56, 57, 256, 258, 259, 260. 6.625" Tine Length 3.875" Coil to Hook 2.50" Tooth Coil Teeth Mounting Clip Kit Includes: Clips (# 792492), Bolts (# 280744), and Nuts & Lock-washers for each 1-prong Tooth. Replaces Part Numbers: 64562, 792493K.
- (1) Fits International 5 Bar Hay Rake Tooth Teeth Replaces 457374R1,462978R1 - Used parts are sold as is unless specified otherwise.
- 0045NGTS Flat Oval Tine Washer for Flat Bar Hay Tedders - 0045NGTS Tine Washer. Replaces Part Number: 0045NGTS. This oval shaped tine washer is 30mm x 40mm with a 12mm center hole and is 6.3mm thick. Tine Washer Specifications Oval Shaped. Ohio Residents Only.
- 5 of Double Rake Teeth 5.25" Tine x 1.845" Coil x 4.5" Tine Gap w/ 0.281" Wire - Fits Rake / Tedder(s) F-76 Replaces OEM nos 2117RH, L2117R Fits Rake / Tedder(s) 404 (1065-later) Replaces OEM nos 400341 Replaces OEM nos 491478R1 Replaces OEM nos 96FH2 Tine Length: 5.25" Tine Gap: 4.50" Coil Diameter: 1.845" Bolt Hole Diameter: .375" Tine Diameter: 0.281".
- NEW! 5' Medium Duty Landscape Rake Tractor Attachment Category 1!! - The units have 5 forward and 5 reverse settings and can be quickly changed to pull or push depending on the chore being done. Suggested for 20-50 HP tractors. Optional wheel Kit available for all models.
- NEW! 6' Medium Duty Landscape Rake Tractor Attachment Category 1!! - The units have 5 forward and 5 reverse settings and can be quickly changed to pull or push depending on the chore being done. Suggested for 20-50 HP tractors. Optional wheel Kit available for all models.
- New Holland 56 Rake Decals
- Walton / Galfre (NEW) Vertical Gear for Hay Tedder 35 Tooth with 4 bolt flange - We are a Galfre US Distributor and carry many Galfre Parts. Vertical 35 Tooth 4 Bolt FlangeGear for Hay Tedder. Will fit the Walton WT 9 and WT 21, Galfre Models GTS-280 - GTS 520 and WAC -9 machines.
- 110SV Tedder Tine Clamp, fits Round Bar Tine Arms, Galfre Tedders and Hay Rakes - Fits Galfre Model B350, C250, Walton B350 and C250, Galfre AG Series Hay Rake, Maschio Rotary Rakes and several more. Replaces Part Number: 110SV. Tine Clamp Specifications Fits Round Tine Arms.
- Replacement Hay Tedder PTO with Torque Liniter, Series 4 with 47" Overall Length - Series 4 (40HP) x 1200mm overall length (47") maximum extended length of 63". Includes enclosed torque limiter. Made in Italy. Part Number: TX4-1200-LN. Ohio Residents Only.
- 850614 Ford New Holland Hay Rake Right Hand Tooth 216 & 258 - Single - - Replaces New Holland Part Numbers: 139041, 850614. New Holland Balers: 216, 258 with right-hand hook, 259 Rolabar Rake. Right-hand rake tooth. Sold as a single tooth. Hook style head for maximum rubber adhesion.
- Universal Rake Tooth Replaces AE24953 AE47389 65609 and 850612 -Single - - Replaces John Deere Part Numbers: AE24953, AE47389. Replaces New Holland Part Numbers: 65609, 850612. Sold as a single tooth. Hook style head for maximum rubber adhesion. Tine length from mounting hole: 10".
- 3 of Tedder Teeth 7" Short Tine x 9.25" Long Tine x 4.5" Tine Gap x 2.5" Coil - Fits: Hay Tedder Model 3700 (RH Side; Narrow Tine); Fits: Hay Tedder Models: HS360, Haybob 300, Hay Bob 300; Two Basket Rake Tedder; (RH Side; Narrow Tine). Replaces: PZ106, ZPZ224 Fits: Hay Tedder Model HS360; Replaces: 510.01.286, 510.01.367, 51001286, 51001367.
- 10 of JD Rubber Mount Rake Teeth 7" Tine x 1.625" Yoke Opening x 3/8" Holes RMT7 - RMT-7 Rubber Rake Tooth JD AE47389 OR AE24953 • Heat treated tines for long lasting performance. • Consistent rubber quality assured by injection molding. • Hook style head for maximum rubber adhesion. • Yoke opening: 1-5/8". • Bolt hole diameter: 3/8". • Tine length from mounting hole: 10". • Tine diameter: 9/32". Replaces JD Models: 70, 71, 640, 650, 652, 660, 662, 670, 671, 672, 673, 896A.
- 10 of Rake Teeth 7" Tine x 2.25" Coil x 3.75" Hook w/ 0.244" Wire AC-1 Farmer - Single Rake Tooth Side Delivery Parallel Bar Replaces 531727, NI2D, 0782ME, 400033, 531727, AC-1 & 0633ME.
- 6 of KT-1 - Double Teeth Tedder Tines 15.375" Tines x 3.50" Gap x 2.75" Coil - Set of Six Replacement Tedder Teeth. 3.50" Tine Gap 15.375" x 3.50" Tine Gap x 2.75" Coil Width Replaces Part Number: 0109040.
- 3 of Tedder Teeth 9.25" Short Tine x 10.75" Long Tine x 7.125" Gap x 1.625" Coil - Fits: Hay Tedder Model 3700 (LH Side; Narrow Tine); Fits: Hay Tedder Models: HS360, Haybob 300, Hay Bob 300; Two Basket Rake Tedder; (LH Side; Narrow Tine); Replaces: PZ107, ZPZ107. Fits: Hay Tedder Model HS360; Replaces: 510.01.287, 51001287,.
- 5 of Tedder Rake Teeth 15.50" Tine x 3.50" Tine Gap x 2.787" Coil GS-1 Farmer - Models: WT16 WT19 WT21 WT9 21046. Models: 280, GS280, GST280, All up to 1995.
- 10 of Rubber Mount Rake Teeth 7" Tine x 1.625" Hook x 3/8" Hole x 3/8" Slot Hole - Fits most round bar and parallel bar rakes with 1 5/8" bar. Yoke is punched with 3/8'' diameter hole on one side and 3/8'' diameter slotted hole on other side for a universal fit. JD Models: 54, 64, 74, 350, 640, 650, 652, 660, 662, 670, 672, 858A, 894, 894A, 896, 896A Not for use on models with Vertical Mounting Studs JD Models: 56, 57, 256 Also fits many other models. Will replace OEM#s: 65609, 850612.
- 10 of Hay Rake Teeth 7" Tine x 3.625" Hook x 2.25" Coil x 0.244 Wire NI-1 Farmer - 10 of Hay Rake Teeth 7" Tine x 3.625" Hook x 2.25" Coil x 0.244 Wire.
- 10 of Hay Rake Teeth 7.5" Tines x 3.625" Gap x 1.562" Coil x 0.244 Wire NI-2 - Fits Rake(s) 4, 44, 45G ReplacesOEM #'s: 96NI2, 048ME, PMNI-2, TENI2, TENI2C Tine Length: 7.5" Tine Gap: 3.625" Coil Diameter O.D.: 1-9/16".
- 6 of Hay Rake Teeth 5.25" Double Tine x 2.5" Tine Gap x 1.50" Coil HE-6 Farmer - Fits Baler(s) 8420 Fits Baler(s) RB34 Fits Baler(s) 530, 730, 830, 1734, 5134, 5510, 5530, 5540, 5545, 5580, 5580E, 5585 Replaces OEM nos 1710102, 2700222 Fits Baler(s) 1734 Fits Baler(s) 4643, 6243, 6343 Replaces OEM nos 96HE6, TEHE6, 01710102 (A) Overall Length: 6.750" (B) Tine Gap: 2.5" (C) Coil Diameter: 1.5".
- 25 of Single Steel Rake Teeth Replaces JD 850, 858, 896, 851, 24 & 216 257SE - 25 of New rake tooth. Fits rakes 350, 851, 858, 894, 896.
- Flyer For The Advance Hay Tedder 1890 - ALWAYS WALK AWAY WITH A DEAL. 2 panel foldout with a brief detail on construction and the warranty.
- Heavy Duty Lifting Bracket - Heavy Duty lifting Bracket,Weld on or bolt on,Dimensions are 8" by 8" made out of 3/8 thick steel.Thanks for viewing.
- 50 of 7" Tine x 3-7/8" x 2-3/8" Diameter Coil Hay Rake Teeth 64562 Farmer Bob's - Hay Rake Tooth, 262 wire, yellow, Fits Models 55, 56 and 57 Rakes and Models 256, 258, 259 and 260 Rotobars.
- 25 Replacement 7" Tine x 3-7/8" x 2-3/8" Diameter Coil Hay Rake Teeth 64562 - Hay Rake Tooth, 262 wire, yellow, Fits Models 55, 56 and 57 Rakes and Models 256, 258, 259 and 260 Rotobars.
- New Holland 259 Hay Rake Decals
- New Holland 258 Rake Decals
- New Holland 256 Hay Rake decals
- New Holland 260 Hay Rake Decals
- 5 pack Hesston Galfre New Idea Hay Tedder tine tooth fluffer teeth GT46S - Galfre Rake 280. Galfre Rake GT280. Galfre Rake GTS280. Hesston Hay Tedder 3710. Hesston Hay Tedder 3717. Hesston Hay Tedder 3727. New Idea Hay Tedder 4210. New Idea Hay Tedder 4217.
- 15.0 X 6.0-6 Tedder Tire and Wheel, Fits Late Model Galfre and Morra Hay Tedder - Features a wide flotation 6 ply rated tire with tube, replaceable ball bearings with a 25mm bearing bore and 2" bearing width with hub for trailer axle type dust cover (Included). Fits late model Galfre GTS420, GTS480, GTS520 with 2" wide wheel hub and trailer axle type dust cap.
- 15.0 X 6.0-6 Tedder Tire and Wheel Fits Galfre Walton and First Choice Tedders - Features a wide flotation 6 ply rated tire with tube, replaceable ball bearings with a 25mm bearing bore and 3" bearing width. Fits First Choice models GS2400, GS420, GS480. GS500, GS520, Galfre models GTS420, GTS480, GTS520 and Walton WT21 Hay Tedders.
- 3.50 X 6 Tedder Tire and Wheel, Fits Tonutti GT230 GT250 GT310 GT380 GT440 GT500 - Features a 3-Rib Agricultural 4 ply rated tire with tube, replaceable ball bearings with a 25mm bearing bore and 2.28" bearing width. Fits Tonutti Models GT230, GT250, GT310, GT380, GT440, GT500, GT510, PL015 and PR015 hay machines with a 3.50 X 6 Tire and Wheel.
- 3.50 X 6 Tedder Tire and Wheel, Fits Galfre Walton and First Choice Hay Tedders - Features a 3-Rib Agricultural 4 ply rated tire with tube, replaceable ball bearings with a 25mm bearing bore and 58mm bearing width.
- VI-1H .275" Wheel Rake Replacement Teeth Tine 6"X10" X 17 1/2" Fits Kuhn,Vermeer - These are new wheel rake teeth. They are 6"X 10 X 17 1/2". Used parts are sold as is unless specified otherwise.
- Gt46S Hay Tedder Tooth Hesston /Walton/ New Idea/ Galfre/ Befco "Free Shipping" - HAY TEDDER TOOTH GT46S. Galfre Rake 280. Galfre Rake GT280. Galfre Rake GTS280. Befco Rake GAT320. Befco Rake GAT500. Hesston Hay Tedder 3710. Hesston Hay Tedder 3717.
- Two New 4.00-12 Carlisle Rib Tires & Tubes fit Farmall Cub Tractor - The price is for TWO tires, you may buy more by changing the quantity when you Buy-it-now. Two New Hard-To-Find.
- Galfre 0020NGTS End Gear For Hay Tedder, 20 Tooth 1-3/8" Bore Also fits Walton - This is the gear that mounts on the horizontal shaft that runs through the body of the hay tedder. It has 20 teeth, 1 3/8" bore and has a 10mm key way. Part Number 0020NGTS.
- Galfre 0057NGTS Hay Tedder Double Universal Joint for NGTS Series - Double yoke assembly for Galfre NGTS series hay tedder. Used where the wings on a four basket hay tedder fold up for transport. This yoke assembly will fit the NGTS 280 and 520 model hay tedders. Part Number: 0057NGTS.
- Vertical Gear for First Choice / Galfre GS Tedder 22 Tooth, with flange 0064GS - Part Number 0064GS / BAF-0064GS. This gear has 22 teeth with a flange with 4 threaded holes for the pan to mount that holds the tine arms. The axle assembly mounts to the shaft (not included) that runs through this gear.
- New Idea Pull Type Hay Rake Ground Drive - NEW IDEA PULL TYPE HAY RAKE GROUND DRIVE works Good.
- Kodiak GR-5800 Series Tiller Tines 18 Each Left and Right Hand - Fits all Kodiak models including GR-5800-4', GR-5800-5', GR-5800-6'. This sale is for eighteen (18) left and eighteen(18) right hand tines. This is a complete set of tines for the 4' wide machine. These tines are 1/4" thick and 2-1/2" wide at the cutting edge.
- End Gear for Walton / Galfre Hay Tedder 20 Tooth, 1-3/8" Bore with key slot - This gear has 20 teeth with a 1-3/8" bore (35mm). Also used in RG Series Drum Mower gearbox and drives. make sure we have the right item for your needs!
- One New 4.00-12 Carlisle Rib Implement Farm Tire & Tube - The price is for ONE tire & tube, you may buy two or more by changing the quantity when you Buy-it-now. One New Hard-To-Find.
- Da Ros 6100270 Tine Arm for Hay Tedder; One Stud/ Pin - Part Number: 6100270. Tine mounting hole is 2" on center from end of tine arm. Tine arm is flat Bar, 26 3/4" long overall, 1/2" thick, 1 1/2" wide with one 14mm mounting hole and one stud. Single 14mm hole on tine mounting side.
- 6100280 DaRos Tine Arm for Hay Tedder One Threaded Hole Style - Part Number: 6100280. Tine mounting hole is 2" on center from end of tine arm. Tine arm is flat Bar, 26 3/4" long overall, 1/2" thick, 1 1/2" wide with two 14mm mounting holes, one threaded. Single 14mm hole on tine mounting side.
- One New 4.00-9 Carlisle Hay Rake Rib Implement Tire & Tube - Also fits old HAY MOWERS manufactured by. 4.00-9 Carlisle. The price is for ONE tire & tube, you may buy two or more by changing the quantity when you Buy-it-now. One New Hard-To-Find. International Harvester.
- Input Shaft for Galfre GTS Series Hay Tedder - This shaft has the pinion gear machined directly on the shaft. This gear will fit the model GTS 280, GTS 420, GTS 480 and GTS 520 hay tedders. The overall length of the shaft is 9 3/4", there is a circlip groove cut into the shaft 4 1/2" from the 6 splined end.
- Galfre Bevel Gear for GTS Series Hay Tedder - This gear will fit the model GTS 280, GTS 420, GTS 480 and GTS 520 hay tedders. Part Number 0012NGTS. 1-0 toll free.
- Galfre 0039GS Universal Joint for Galfre Hay Tedder GS Series - Part Number: 0039GS. Double yoke assembly for Galfre GS series hay tedder. Used where the wings on a four basket hay tedder fold up for transport. This yoke assembly will fit the GS420, GS 480 and GS 520 model hay tedders.
- Trailer Leaf Spring Equalizer With 9/16" Bolt Holes and Nylon Bushings Set of 2 - (2) New 3.5K tandem axle trailer axle suspension equalizer, 7 3/4" on center 9/16" spring mounting holes, tandem axle trailers. Mount Orab, Ohio 45154. Part Number - 4101-1.
- TUBE fits some Hay Tedder Bailer Tiller 3.50-8 350-8 4.00-8 400-8 TR-13 - To avoid confusion we list All Tire sizes a tube will fit in the add for that tube. If you do not see your tire size listed in this add this tube will not fit your tire size. Can be used in one or two piece rims.