100
Field Tuff Cultipacker - 48in.W
$899.99 Buy It Now
Nichols Tillage RPUZB01CP Ripper Tooth For Unverferth 112, 122, 132 OEM 67949B
$75.00 Buy It Now or Best OfferField Tuff Cultivator - 48in.W, Model# ATV-470
$549.99 Buy It Now
(5) Five 94407, 7" Agricultural Field Cultivator Sweep 1 3/4" CTC 3/8" Bolts
$72.99 Buy It Now
94407 7" 1/4" Thick Agricultural Field Cultivator Sweep 1 3/4" CTC 3/8" Bolts
$24.99 Buy It Now
5105 Fairbanks Morse 1A79 Magneto Frazer Rototillers B1-6 & 7 Rebuilt A555852
$150.00 Buy It Now
1 watcher5105 Fairbanks Morse 1A79 Magneto for B1-6 & 7 Frazer Rototillers Rebuilt
$150.00 Buy It Now
5484 Implement Hitch Bracket for Frazer Rototillers
$95.00 Buy It Now or Best Offer
Complete Pack of all 35 Service Bulletins for Frazer Rototillers
$20.00 Buy It Now or Best Offer
3 Books on CD - Parts Book + Operators Manual + Shop Manual Frazer Rototillers
$30.00 Buy It Now or Best Offer
Lot of 3 Books - Parts Book + Operators Manual + Shop Manual Frazer Rototillers
$40.00 Buy It Now or Best Offer
3-D Drawing of the complete Frazer Rototiller B1-6 thru B1-7
$30.00 Buy It Now or Best Offer
5767 Transmission Oil Seal for Frazer Rototillers NEW
$25.00 Buy It Now or Best Offer
5768 V Belt Pulley (Only) for the B-74A Belt Pulley Drive for Frazer Rototillers
$65.00 Buy It Now or Best Offer
5090 Chrome Fuel Tank Gas Cap NEW for Frazer Rototillers
$15.00 Buy It Now or Best Offer
5089 Used Fuel Tank 9 Quart (Tank is Clean Inside) for Frazer Rototillers
$65.00 Buy It Now or Best Offer
5080 New Fuel Strainer Bowl for Frazer Rototillers
$25.00 Buy It Now or Best Offer
2 watchers5080 USED Refurbished Fuel Strainer Bowl for Frazer Rototillers
$15.00 Buy It Now or Best Offer
5078L Throttle Cable for Tillers with Reverse Gear 82" for Frazer Rototillers
$25.00 Buy It Now or Best Offer
5078S Throttle Cable for Tillers without Reverse Gear 69" for Frazer Rototillers
$20.00 Buy It Now or Best Offer
5033 Carburetor Choke Control Cable for Frazer Rototillers
$20.00 Buy It Now or Best Offer
5013 NEW Crankshaft Bearing for Frazer Rototillers
$20.00 Buy It Now or Best Offer
5009 Used Crankshaft Assy & Connecting Rod with Bearings for Frazer Rototillers
$60.00 Buy It Now or Best Offer
Aeroshell 80 SAE 40 Oil for Gas Mixture - 1 NEW Quart for Frazer Rototillers
$20.00 Buy It Now or Best Offer
HCP Hood Control Rod Plate (NEW) for Frazer Rototillers
$43.00 Buy It Now or Best Offer
Serial Number Plate (NEW) for Frazer Rototillers
$12.00 Buy It Now or Best Offer
Electric / pneumatic Front Starter Housing Assembly for Frazer Rototiller
$300.00 Buy It Now or Best Offer
Complete 18 piece Engine Rebuild Kit for Frazer Rototiller
$200.00 Buy It Now or Best Offer
1 watcherComplete Frazer Rototiller 397 Fastener Replacement Kit for units with Reverse
$90.00 Buy It Now or Best Offer
Complete Frazer Rototiller 339 Fastener Replacement Kit for units with No Revers
$65.00 Buy It Now or Best Offer
Complete Oil Seal Kit Frazer Rototillers (5012 x 2, 5259, 5289 x 2, 5767 x 2)
$125.00 Buy It Now or Best Offer
1 watcher400-12 Firestone 21" OD Tire and Rim for B1-6 & 7 Frazer Rototillers Choice 4
$50.00 Buy It Now or Best Offer
400-12 Firestone 21" OD Tire and Rim for B1-6 & 7 Frazer Rototillers Choice 3
$50.00 Buy It Now or Best Offer
400-12 Tire Goodyear Sure Grip 21" OD for B1-6 & 7 Frazer Rototillers Choice 2
$35.00 Buy It Now or Best Offer
400-12 Tire Goodyear Sure Grip 21" OD for B1-6 & 7 Frazer Rototillers Choice 1
$35.00 Buy It Now or Best Offer
5918 Reverse Shifter Stop Assy & 5919A Lever for B1-6 & 7 Frazer Rototillers
$75.00 Buy It Now or Best Offer
1 watcher5106 Edison Splitdorf Type RM Magneto for B1-6 & 7 Frazer Rototillers sn D25834
$150.00 Buy It Now or Best Offer
1 watcher5106 Edison Splitdorf Type RM Magneto for B1-6 & 7 Frazer Rototillers sn Q20399
$150.00 Buy It Now or Best Offer
1 watcher5106 Edison Splitdorf Type RM Magneto for B1-6 & 7 Frazer Rototillers Rebuilt
$150.00 Buy It Now or Best Offer
5030 Tillotson YC9A Carburetor for B1-6 & 7 Frazer Rototillers - Rebuilt Refurb
$150.00 Buy It Now or Best Offer
1 watcherNEW Agrituf SuperRip 10" Point For Tillage 10" Blade Length Agco # ACP0274050
$200.00 Buy It Now or Best Offer
1 watcher(QTY 1) High Rate Chisel Point Sweep 701177-C ZH-1 *Free Shipping*
$159.99 Buy It Now
6 watchers
Pair of Farmall 1 Row Cultivator Tobacco Hoes Super A 100 130 140 Cub Tractor$200.00 Buy It Now
Kongskilde Vibro Till 5125- 01000835 Cultivator Tine Spring
$50.00 Buy It Now
2 watchersOrganic WEEDPULLER Cultivator Hemp Vegetable Organic Plastic Mulch
$2,500.00 Buy It Now or Best Offer
1 watcherKRESS Finger Weeder cultivator Hemp Vegetable Organic Plastic Mulch
$6,500.00 Buy It Now or Best Offer
Cultivator Pt Heavy Cultivator Steel 2" W 11" L 1/2 thick 169UB *FREE SHIPPING*
$29.95 Buy It Now
1 watcherCultivator Sweep, Row Crop 16" x1/4 55' stem angl 7/16 bolt 2-1/4 cntr E150-16
$22.84 Buy It Now
Row Crop Cultivator Sweep 11" 47 degree 1-3/4 hole cntr 1/4 thick 202-11-4
$20.54 Buy It Now
Row Crop Cultivator Sweep 9" 47 degree 1-3/4 hole cntr 5/16 thick 202-9-5
$19.31 Buy It Now
Jcb Service Genuine Part 510/91800 Toe Plate Cutting Edges-17.48" Long New
$149.99 Buy It Now
Crop Row Deflector And Disk Brackets John Deere N234115
$8.00 Buy It Now or Best Offer
12 watchersBrinly-Hardy Cultivator - 18in. to 40in. Working Width, Model# CC-56BH
$289.00 Buy It Now
3 Qty of Empire IF11OUB Cultivator Points (3 Quantity)
$47.99$42.71 Buy It Now or Best Offer
Case IH 4300 Field Cultivator
$4,800.00 Buy It Now or Best Offer
1 watcherConical Nut & Spring Washer For Lely Power Harrow Tines
$8.65 Buy It Now
Row Crop Cultivator Sweep 18" x 6.35 MM (0.25") Thick w/ 2 - 7/16" Bolt Holes
$35.00 Buy It Now or Best Offer
Set of 3 OMNI Mfg 9-1/2" Ductile Iron Cultipacker Wheels
$99.00 Buy It Now
1 watcherJohn Deere Killefer agriculture disk cultivator
$1,800.00 Buy It Now or Best Offer
1 watcher(5) 92407H 7" Hardfaced Agricultural Field Cultivator Sweep 1 3/4" CTC 7/16"
$114.99 Buy It Now
92407H 7" Hardfaced Agricultural Field Cultivator Sweep 1 3/4" CTC 7/16" Bolts
$36.99 Buy It Now
(5) STS06 6" 1/4" Thick Springtooth Cultivator Sweeps 2" CTC Uses 3/8" Bolts
$46.99 Buy It Now
1 watcherSTS06 6" 1/4" Thick Springtooth Cultivator Sweep 2" CTC Uses 3/8" Bolts
$19.99 Buy It Now
3 watchersroller for cultivators v ring roller Ø600 3m
$2,566.95 Buy It Now
A-178647C2 Main Drive Coupling Fits Case/Ih Corn Head Series 824 833 843 844 853
$59.99 Buy It Now
8 watchersNew Farm & Garden Replacement Cultivator,Harrow 2-Hole "C" Shank 16-7/8" Long
$46.99 Buy It Now
Bed Shaper | Used Ag Equipment
$3,900.00 Buy It Now or Best Offer
10 Field Cultivator Sweeps Never Narrows (47 degree stem angle 7/16 bolt holes)
$325.00 Buy It Now or Best Offer
(5) Five 92407, 7" Agricultural Field Cultivator Sweep 1 3/4" CTC 7/16" Bolts
$78.99 Buy It Now
CAT 2 LOWER LINK IMPLEMENT PIN (28mm x 159mm) FOR TRACTOR PLOUGH POWER HARROW
$19.91 Buy It Now
3 watchers(QTY 2) NEW NICHOLS C81 Cultivator reversible point 11' X 2" Ships FAST/FREE
$26.99 Buy It Now or Best Offer
2 watchersChisel Plow Point w/ chrome cap 13" x 2" x 3/4" THICK. 2-1/4-2 1/2" CNTR CB-75
$33.16 Buy It Now
1 watcherGreen Earth 4-Row Inter-Row TillerCultivator:Mechanical Organic Weed Termination
$25,999.00 Buy It Now
1 watcherGreen Earth 3Row Inner-Row Tiller,Cultivator CS3075: Herbicide Free Weed Control
$17,999.00 Buy It Now
Green Earth Inner-Row Tiller,2-Row Cultivator, CS3075: Organic,Mech Weed Control
$12,999.00 Buy It Now
4 watchersFIELD CULTIVATOR POINTS, CULTIVATOR PARTS, 2"x11-1/2"x3/8" Part 108020
$7.77 Buy It Now
1 watcherWil-rich Field Cultivator coil time harrow frame bracket
$24.99 Buy It Now or Best Offer
1 watcherWil-rich Field Cultivator Shank Mounting shank to frame bracket 11512
$39.99 Buy It Now
1 watcher2 of 9-1/2" Cultipacker Wheel to Replace Broken & Worn Out Wheels 62078 Farmer
$84.95 Buy It Now
9-1/2" Cultipacker Wheel to Replace Broken & Worn Out Wheels 62078 Farmer Bob's
$49.95 Buy It Now
9 watchersJohn Deere Field Cultivator, Model 1100 With Harrow
$750.00 Buy It Now
6 watchersForged Steel Cultivator "C" Shank 2 Hole 16-7/8 Inch Long Wedge or V Shaped
$65.50 Buy It Now
6 watchersS-tine Sweep, 5 point Danish, 1/4" x 4" Danish Type, single bolt hole
$7.72 Buy It Now
2 watchersPlow Hiller & Bed Shaper / Mounding Equipment for Christmas Trees Strawberries
$8,500.00 Buy It Now or Best Offer
4 watchersjohn deere gauge wheels
$100.00 Buy It Now
12 watchersPittsburgh Attachments Cultivator with Steel Shanks 3 Point two row
$425.00 Buy It Now or Best Offer
3 watchersIHC 4400 Style 3 Point Mulch Finisher/Vibrashank Field Cultivator
$6,500.00 Buy It Now or Best Offer
Landoll coil tine Part # 164315 Field cultivator 9630 9650 8530 8550 Finisher
$24.99 Buy It Now or Best Offer
5 watchersMakita Cultivator Couple Shaft Attachment
$500.00$319.00 Buy It Now
1 watcher14 Osmundson OK-4D Danish S Time Sweep or Shovel - BRAND NEW
$52.50 Buy It Now
4 Osmundson OK-2 3/4” Danish S Time Sweep or Shovel
$12.00 Buy It Now
1 watcher4 Osmundson 7” OK-7 Danish Tine NEW
$20.00 Buy It Now
1 watcher2 Osmundson 7” Field Cultivator Sweeps 7FCH 4-40 NEW
$15.00 Buy It Now
1 watcher Spring Tooth Cultivator Point 2-1/2" Wide x 11" Long w/ 1" to 2" Hole Spacing$32.95 Buy It Now
3 watchers 5 Spring Tooth Cultivator Points 2-1/2" Wide x 11" Long w/ 1" to 2" Hole Spacing$84.95 Buy It Now
NEW Early Farmall Cub brake anchor pin replaces 360040R1
$34.95 Buy It Now
cultivator sweep #93411
$36.69 Buy It Now
1 watcherCultivator Point Alfalfa Spike 1-1/2 X 12 X 5/8 Thick Heavy Duty 75UB-H
$18.31 Buy It Now or Best Offer
Row Crop Cultivator Sweep 4" x 6 MM (0.236") Thickness w/ 2 - 7/16" Bolt Holes$38.95 Buy It Now
Cultivator Parts, Cresent Hoe 6 X 1/4 Right Hand S1016R
$18.94 Buy It Now or Best Offer
- Ball Joint, Spherical Ball 1" ID 2-3/4 OD 5526 - Danuser Ball Joints are manufactured for use in a variety of applications.
- Ball Joint, Spherical Ball 7/8 ID 2-1/4 OD 5088 - Danuser Ball Joints are manufactured for use in a variety of applications.
- Brillion (Landoll) 8C384 Spring Tooth Clamp LND-8C384 - Brillion Spring Tooth Clamp # 8C384.
- John Deere A13855 Landside fits 4200 and 4600 Integral Moldboard Plow - John Deere A13855 Landside fits 4200 and 4600 Integral Moldboard Plow.
- One Row Cultivator Implement County line Used Twice Extra Points And Shanks - One Row Cultivator Implement County line Used Twice Extra Points And Shanks. Great item! Gently used. Extra points and shanks included.
- Navigator Cultivating Tractor 3 Pt. Guidance System - Guidance System.
- Bearcat Cultimulcher - Hitch is unbolted for transport. Hydraulic cylinder does not go with it and will be removed. If you have a way to get this onto your truck or trailer that would be fantastic, otherwise I should be able to lift it on with a wrecker.
- Cultivator Point, Crop Cultivators 2" wide 10" long 5/16 thick IF210UB - Cultivator Point, Row Crop Cultivators 2" wide 10" long 5/16 thick IF210UB.
- Green Earth Inner-Row Tiller 2-Row Cultivator ZS40120: Organic,Mech Weed Control - Model ZS40120 2-Row Inter-Row Tiller. Inter-Row Tiller Ridger Moves Loose Soil Between Plants For Weed Suppression & Stalk Support., Quick Hitch Compatible. Excellent Performance & Efficiency That Contributes To Your Bottom Line!
- Green Earth 3Row Inner-Row Tiller,Cultivator ZS40120:Herbicide Free Weed Control - 3-Row Inter-Row Tiller. Use The Optional Fertilizer Box For Efficient, Row Specific Fertilizer Application! Inter-Row Tiller Ridger Moves Loose Soil Between Plants For Weed Suppression & Stalk Support.
- Makita KR401MP Cultivator Attachment (AUTHORIZED DEALER) - It has a 9” 6-tine steel blade for efficient rejuvenation of planting areas and has a compact design for work in tight spaces. It quickly attaches to the Makita power head for easy operation, and the steel drive shaft is engineered for lower vibration and longer service life.
- Green Earth 4-Row Inter-Row TillerCultivator:Organic,Mechanical Weed Termination - Ridger Moves Loose Soil Between Plants For Weed Suppression & Stalk Support., Quick Hitch Compatible. Clevis Style, Cat 1 or 2, Quick Hitch Compatible 3-Point! Green Earth Inter-Row Tillers Are Available To List From 1 to 20 Row Units!
- CULTIVATOR PACKER Commercial - Presses Seeds into Ground - 48" Working Width - Working Width: 48".
- Spring Tooth Reversible Cultivator Point 1-1/2" Wide x 5/16" Thick x 10.5" Long - Reversible points for Field & Row Cultivators & Spring Tooth Harrows. Oil quenched and heat treated. Plated and sharpened for better performance. Manufactured from High-Grade Heat-Treated Steel (1) 7/16" Square Hole and 1 Slotted Hold. 1-1/4" to 2-1/4" Hole Spacing. Uses 7/16" Bolt. Hardware not included. Style 2 Cultivator Point.
- 5 Spring Tooth Reversible Cultivator Points 1.5" Wide x 5/16" Thick x 10.5" Long - Reversible points for Field & Row Cultivators & Spring Tooth Harrows. Oil quenched and heat treated. Plated and sharpened for better performance. Manufactured from High-Grade Heat-Treated Steel (1) 7/16" Square Hole and 1 Slotted Hold. 1-1/4" to 2-1/4" Hole Spacing. Uses 7/16" Bolt. Hardware not included. Style 2 Cultivator Point.
- Makita KR401MP Cultivator Couple Shaft Attachment, Black - It has a 9?. 6-tine steel blade for efficient rejuvenation of planting areas & has a compact design for work in tight spaces. It quickly attaches to the Makita power head for easy operation, & the steel drive shaft is engineered for lower vibration & longer service life.
- 6 ft Cultipacker - Cat 1 - 3 Pt Quick Hitch Compatible - Steel - Commercial Duty - 3 Point Quick Hitch: Yes. Working Width (in): 72" (6 ft). Wheel Type: Steel Press. Construction: Steel. Wheel Quantity: 12. Top Link Opening (in): 2-1/4". Overall Depth (in): 24-1/4". Overall Height (in): 22-3/4".
- 30592Ba Right Hand Tobacco Hoe Ih 144 Cultivators Farmall Cub Super A 100 130 - GOOD CONDITION. Marshall's Tractor Service.
- 30593Ba Left Hand Tobacco Hoe Ih 144 Cultivators Farmall Cub Super A 100 130 140 - Marshall's Tractor Service. Cynthiana, Ky 41031.
- 1930Ba Ih 144 Right Hand Rear Cultivator Mount Farmall Super A 100 130 140 - USED GOOD CONDITION. Marshall's Tractor Service.
- 1929Ba Ih 144 Left Hand Rear Cultivator Mount Farmall Super A 100 130 140 - Marshall's Tractor Service. Cynthiana, Ky 41031.
- 4819D Oil Fill Cap Fits Farmall H M Super H Super M W4 W6 W9 300 350 400 450 - Cynthiana, Ky 41031. 571 Ky hwy 36 west.
- A-312870 Rh Drag Link End Fits 600 Series 800 Series 2000 Series 4000 Series - DIM A: 34.25" DIM B: 1". 813 THREAD. Cynthiana, Ky 41031.
- 360040R1 Brake Band Anchor Pin Fits Mccormick/ Farmall Cub 1947-1953 - Cynthiana, Ky 41031. 571 Ky hwy 36 west.
- 528837R1 Clevis Fits International 674 474 574 685 695 884 2400 2500 - Cynthiana, Ky 41031. 571 Ky hwy 36 west.
- 369026R1 Transmission Retainer Seal Plate Ih/Farmall 140 130 Super A 100 Super C - Cynthiana, Ky 41031. 571 Ky hwy 36 west.
- Spring Tooth Reversible Cultivator Point 1-3/4" Wide x 1/4" Thick x 11" Long - Reversible points for Field & Row Cultivators & Spring Tooth Harrows. Oil quenched and heat treated. Plated and sharpened for better performance. Manufactured from High-Grade Heat-Treated Steel 7/16" Square Hole and Slotted Hole 1-1/4" to 2-1/4" Hole Spacing. Uses 7/16" Bolt. Hardware not included. Style 5 Cultivator Point.
- 5 Spring Tooth Reversible Cultivator Points 1-3/4" Wide x 1/4" Thick x 11" Long - Reversible points for Field & Row Cultivators & Spring Tooth Harrows. Oil quenched and heat treated. Plated and sharpened for better performance. Manufactured from High-Grade Heat-Treated Steel 7/16" Square Hole and Slotted Hole 1-1/4" to 2-1/4" Hole Spacing. Uses 7/16" Bolt. Hardware not included. Style 5 Cultivator Point.
- Spring Tooth Reversible Cultivator Point 1-3/4" Wide x 1/4" Thick x 11" Long - Reversible points for Field & Row Cultivators & Spring Tooth Harrows. Oil quenched and heat treated. Plated and sharpened for better performance. Manufactured from High-Grade Heat-Treated Steel 2 Square Holes. 1-5/8" to 1-3/4" Hole Spacing. Uses 3/8" Bolt. Hardware not included. Style 4 Cultivator Point.
- 5 Spring Tooth Reversible Cultivator Points 1-3/4" Wide x 1/4" Thick x 11" Long - Reversible points for Field & Row Cultivators & Spring Tooth Harrows. Oil quenched and heat treated. Plated and sharpened for better performance. Manufactured from High-Grade Heat-Treated Steel 2 Square Holes. 1-5/8" to 1-3/4" Hole Spacing. Uses 3/8" Bolt. Hardware not included. Style 4 Cultivator Point.
- 5 Spring Tooth Reversible Cultivator Point 1-3/4" Wide x 1/4" Thick x 11" Long - Reversible points for Field & Row Cultivators & Spring Tooth Harrows. Oil quenched and heat treated. Plated and sharpened for better performance. Manufactured from High-Grade Heat-Treated Steel 3/8" Square Hole and Slotted Hole 1-1/4" to 2-1/4" Hole Spacing. Uses 3/8" Bolt. Hardware not included. Style 5 Cultivator Point.
- Spring Tooth Reversible Cultivator Point 1-3/4" Wide x 1/4" Thick x 11" Long - Reversible points for Field & Row Cultivators & Spring Tooth Harrows. Oil quenched and heat treated. Plated and sharpened for better performance. Manufactured from High-Grade Heat-Treated Steel 3/8" Square Hole and Slotted Hole 1-1/4" to 2-1/4" Hole Spacing. Uses 3/8" Bolt. Hardware not included. Style 5 Cultivator Point.
- Spring Tooth Reversible Cultivator Point 2" Wide x 5/16" Thick x 10.5" Long - Reversible points for Field & Row Cultivators & Spring Tooth Harrows. Oil quenched and heat treated. Plated and sharpened for better performance. Manufactured from High-Grade Heat-Treated Steel (1) 7/16" Square Hole and 1 Slotted Hold. 1-1/4" to 2-1/4" Hole Spacing. Uses 7/16" Bolt. Hardware not included. Style 2 Cultivator Point.
- 5 Spring Tooth Reversible Cultivator Points 2" Wide x 5/16" Thick x 10.5" Long - Reversible points for Field & Row Cultivators & Spring Tooth Harrows. Oil quenched and heat treated. Plated and sharpened for better performance. Manufactured from High-Grade Heat-Treated Steel (1) 7/16" Square Hole and 1 Slotted Hold. 1-1/4" to 2-1/4" Hole Spacing. Uses 7/16" Bolt. Hardware not included. Style 2 Cultivator Point.
- 5 of Spring Tooth Reversible Cultivator Point 3" Wide x 5/16" Thick x 10.5" Long - Reversible points for Field & Row Cultivators & Spring Tooth Harrows. Oil quenched and heat treated. Plated and sharpened for better performance. Manufactured from High-Grade Heat-Treated Steel (1) 7/16" Square Hole and 1 Slotted Hold. 1-3/4" Hole Spacing. Uses 7/16" Bolt. Hardware not included. Style 2 Cultivator Point.
- Spring Tooth Reversible Cultivator Point 3" Wide x 5/16" Thick x 10.5" Long - Reversible points for Field & Row Cultivators & Spring Tooth Harrows. Oil quenched and heat treated. Plated and sharpened for better performance. Manufactured from High-Grade Heat-Treated Steel (1) 7/16" Square Hole and 1 Slotted Hold. 1-3/4" Hole Spacing. Uses 7/16" Bolt. Hardware not included. Style 2 Cultivator Point.
- Spring Tooth Reversible Cultivator Point 2" Wide x 5/16" Thick x 10.5" Long - Reversible points for Field & Row Cultivators & Spring Tooth Harrows. Oil quenched and heat treated. Plated and sharpened for better performance. Manufactured from High-Grade Heat-Treated Steel 2 Square Holes. 1-3/4" Hole Spacing. Uses 7/16" Bolt. Hardware not included. Style 1 Cultivator Point.
- 5 of Spring Tooth Reversible Cultivator Point 2" Wide x 5/16" Thick x 10.5" Long - Reversible points for Field & Row Cultivators & Spring Tooth Harrows. Oil quenched and heat treated. Plated and sharpened for better performance. Manufactured from High-Grade Heat-Treated Steel 2 Square Holes. 1-3/4" Hole Spacing. Uses 7/16" Bolt. Hardware not included. Style 1 Cultivator Point.
- Spring Tooth Reversible Cultivator Point 1-1/2" Wide x 5/16" Thick x 10.5" Long - Reversible points for Field & Row Cultivators & Spring Tooth Harrows. Oil quenched and heat treated. Plated and sharpened for better performance. Manufactured from High-Grade Heat-Treated Steel 2 Square Holes. 1-3/4" Hole Spacing. Uses 7/16" Bolt. Hardware not included. Style 1 Cultivator Point.
- 5 Spring Tooth Reversible Cultivator Points 1.5" Wide x 5/16" Thick x 10.5" Long - Reversible points for Field & Row Cultivators & Spring Tooth Harrows. Oil quenched and heat treated. Plated and sharpened for better performance. Manufactured from High-Grade Heat-Treated Steel 2 Square Holes. 1-3/4" Hole Spacing. Uses 7/16" Bolt. Hardware not included. Style 1 Cultivator Point.
- 5 Osmundson 10M447 Marathon Field Cultivator 10" Sweep 1/4" Thickness New
- 370159R91 Cylinder Kit Fits Ih/Farmall130 140 230 240 - Cynthiana, Ky 41031.
- 830641M91 Cylinder Kit Fits Massey Ferguson Te20 Tea20 To20 To30 - Cynthiana, Ky 41031. 571 Ky hwy 36 west.
- Ih Cylinder Kit Fits Case/Ih 1466 1486 1566 1586 3388 4166 4186 5088 6388 - Cynthiana, Ky 41031.
- Pipe Tube Assy Fits Case 3220 3230 4210 4230 4240 595 695 895 995 - Cynthiana, Ky 41031.
- 278544A4 Right Control Console Fits Case Cx Diesel Series Cx100 Cx50 Cx60 Cx70 - GOOD USABLE CONDITION. Marshall's Tractor Service.
- 540 Rear Pto Assembly Fits Farmall Tractors Super A 100 130 140 - Cynthiana, Ky 41031.
- Cultivator Point, Reversible 2" wide 11" long 1/4 thick ST12 - Cultivator point Fits hole centers from 1-1/4 to 2-1/4, 7/16 bolts 2x1/4x10-1/2
- 5299 Frazer Rototiller Tine Holder Spring Used Refurbished Has Pitting - 5299 Frazer Rototiller Tine Holder Spring. This is for One Used Frazer Rototiller Tine Spring. I have every part new and used for any Frazer Rototiller. Goes on the Tine Holder in Back. Fit B1-6 thru B1-7 Frazer Rototillers.
- 5299 Frazer Rototiller Tine Holder Spring Used Refurbished Little Pitting - 5299 Frazer Rototiller Tine Holder Spring. This is for One New Frazer Rototiller Tine Spring. I have every part new and used for any Frazer Rototiller. Goes on the Tine Holder in Back. Fit B1-6 thru B1-7 Frazer Rototillers.
- 5300 Frazer Rototiller Spade Point Tine Used - This is for One Used Frazer Rototiller Spade Point Tine. I have every part new and used for any Frazer Rototiller. Goes on the Tine Holder in Back.
- 5300 Frazer Rototiller Hook Point Tine Used - This is for One Used Frazer Rototiller Hook Point Tine. I have every part new and used for any Frazer Rototiller. Goes on the Tine Holder in Back.
- 5300 Frazer Rototiller Diamond Point Tine Used - This is for One Used Frazer Rototiller Diamond Point Tine. I have every part new and used for any Frazer Rototiller. Goes on the Tine Holder in Back.
- 5300 Frazer Rototiller Chisel Tine Used with Welded Strength Seam - This is for One Used Frazer Rototiller Chisel Tine. I have every part new and used for any Frazer Rototiller. Goes on the Tine Holder in Back.
- 5300 Frazer Rototiller Chisel Tine Slightly Used Rounded Corners - This is for One Used Frazer Rototiller Chisel Tine. I have every part new and used for any Frazer Rototiller. Goes on the Tine Holder in Back.
- 5300 Frazer Rototiller Chisel Tine Slightly Used - This is for One Slightly Used Frazer Rototiller Chisel Tine. I have every part new and used for any Frazer Rototiller. Goes on the Tine Holder in Back.
- 5300 Frazer Rototiller Chisel Tine NEW - This is for One New Frazer Rototiller Chisel Tine. I have every part new and used for any Frazer Rototiller. Goes on the Tine Holder in Back.
- (5) White Plastic Field Cultivator Sweep Harrow Tooth Shank Protector 2" X 10" - Will replace JD TY15991.
- Drill Shoe for International IHC IDS331 - Drill shoe.
- Ih 144 Cultivator Front Right Lifting Frame Mount. Farmall / Ih Cub Tractor - FARMALL / IH CUB TRACTOR. Marshall's Tractor Service. GOOD USEABLE CONDITION. NO BREAKS OR NON FACTORY WELDS.
- Allis Chalmers Cultivator, fits Allis Chalmers CA Tractor B C - Condition is "Used".
- Field Cultivator Sweep 12" x 6 MM (0.236") Thickness w/ 2 - 3/8" Bolt Holes - Field Cultivator Sweep "41° WC" Series • High-Carbon, Heat-Treated Steel. • 41° Stem Angle. • 3/8” Bolt holes (2). • 1-5/8" to 1-3/4" Hole spacing. Stay-Wide design maintains the specified cutting width throughout the life of the sweep.
- Field Cultivator Sweep 10" x 6 MM (0.236") Thickness w/ 2 - 3/8" Bolt Holes - Field Cultivator Sweep "41° WC" Series • High-Carbon, Heat-Treated Steel. • 41° Stem Angle. • 3/8” Bolt holes (2). • 1-5/8" to 1-3/4" Hole spacing. Stay-Wide design maintains the specified cutting width throughout the life of the sweep.
- Field Cultivator Sweep 8" x 6 MM (0.236") Thickness w/ 2 - 3/8" Bolt Holes - Field Cultivator Sweep "41° WC" Series • High-Carbon, Heat-Treated Steel. • 41° Stem Angle. • 3/8” Bolt holes (2). • 1-5/8" to 1-3/4" Hole spacing. Stay-Wide design maintains the specified cutting width throughout the life of the sweep.
- Field Cultivator Sweep 9" x 6 MM (0.236") Thickness w/ 2 - 3/8" Bolt Holes - Field Cultivator Sweep "41° WC" Series • High-Carbon, Heat-Treated Steel. • 41° Stem Angle. • 3/8” Bolt holes (2). • 1-5/8" to 1-3/4" Hole spacing. Stay-Wide design maintains the specified cutting width throughout the life of the sweep.
- Field Cultivator Sweep 7" x 6 MM (0.236") Thickness w/ 2 - 3/8" Bolt Holes - Field Cultivator Sweep "41° WC" Series • High-Carbon, Heat-Treated Steel. • 41° Stem Angle. • 3/8” Bolt holes (2). • 1-5/8" to 1-3/4" Hole spacing. Stay-Wide design maintains the specified cutting width throughout the life of the sweep.
- Field Cultivator Sweep 6" x 6 MM (0.236") Thickness w/ 2 - 3/8" Bolt Holes - Field Cultivator Sweep "41° WC" Series • High-Carbon, Heat-Treated Steel. • 41° Stem Angle. • 3/8” Bolt holes (2). • 1-5/8" to 1-3/4" Hole spacing. Stay-Wide design maintains the specified cutting width throughout the life of the sweep.
- Field Cultivator Sweep 4" x 6 MM (0.236") Thickness w/ 2 - 3/8" Bolt Holes - Field Cultivator Sweep "41° WC" Series • High-Carbon, Heat-Treated Steel. • 41° Stem Angle. • 3/8” Bolt holes (2). • 1-5/8" to 1-3/4" Hole spacing. Stay-Wide design maintains the specified cutting width throughout the life of the sweep.
- Field Cultivator Sweep 7" x 6 MM (0.236") Thickness w/ 2 - 3/8" Bolt Holes - Field Cultivator Sweep "47° WCC" Series • High-Carbon, Heat-Treated Steel. • 47° Stem Angle. • 3/8” Bolt holes (2). • 1-5/8" to 1-3/4" Hole spacing. Stay-Wide design maintains the specified cutting width throughout the life of the sweep.
- Field Cultivator Sweep 6" x 6 MM (0.236") Thickness w/ 2 - 3/8" Bolt Holes - Field Cultivator Sweep "47° WCC" Series • High-Carbon, Heat-Treated Steel. • 47° Stem Angle. • 3/8” Bolt holes (2). • 1-5/8" to 1-3/4" Hole spacing. Stay-Wide design maintains the specified cutting width throughout the life of the sweep.
- Field Cultivator Sweep 4" x 6 MM (0.236") Thickness w/ 2 - 3/8" Bolt Holes - Field Cultivator Sweep "47° WCC" Series • High-Carbon, Heat-Treated Steel. • 47° Stem Angle. • 3/8” Bolt holes (2). • 1-5/8" to 1-3/4" Hole spacing. Stay-Wide design maintains the specified cutting width throughout the life of the sweep.
- Field Cultivator Sweep 9.25" x 7.5 MM Thick w/ 2 - 7/16" Bolt Holes Viper Series - Field Cultivator Sweep "47° WCC" Viper Series • High-Carbon, Heat-Treated Steel. • Flanged Wing. • 47° Stem Angle. • 7/16” Bolt holes (2). • 1-5/8" to 1-3/4" Hole spacing. Stay-Wide design maintains the specified cutting width throughout the life of the sweep.
- Field Cultivator Sweep 9" x 6 MM (0.236") Thickness w/ 2 - 7/16" Bolt Holes - Field Cultivator Sweep "47° WCC" Series • High-Carbon, Heat-Treated Steel. • 47° Stem Angle. • 7/16” Bolt holes (2). • 1-5/8" to 1-3/4" Hole spacing. Stay-Wide design maintains the specified cutting width throughout the life of the sweep.
- Field Cultivator Sweep 8" x 6 MM (0.236") Thickness w/ 2 - 7/16" Bolt Holes - Field Cultivator Sweep "47° WCC" Series • High-Carbon, Heat-Treated Steel. • 47° Stem Angle. • 7/16” Bolt holes (2). • 1-5/8" to 1-3/4" Hole spacing. Stay-Wide design maintains the specified cutting width throughout the life of the sweep.
- Field Cultivator Sweep 7.25" x 7.5 MM Thick w/ 2 - 7/16" Bolt Holes Viper Series - Field Cultivator Sweep "47° WCC" Viper Series • High-Carbon, Heat-Treated Steel. • Flanged Wing. • 47° Stem Angle. • 7/16” Bolt holes (2). • 1-5/8" to 1-3/4" Hole spacing. Stay-Wide design maintains the specified cutting width throughout the life of the sweep.
- Field Cultivator Sweep 7" x 6 MM (0.236") Thickness w/ 2 - 7/16" Bolt Holes - Field Cultivator Sweep "47° WCC" Series • High-Carbon, Heat-Treated Steel. • 47° Stem Angle. • 7/16” Bolt holes (2). • 1-5/8" to 1-3/4" Hole spacing. Stay-Wide design maintains the specified cutting width throughout the life of the sweep.
- Field Cultivator Sweep 6" x 6 MM (0.236") Thickness w/ 2 - 7/16" Bolt Holes - Field Cultivator Sweep "47° WCC" Series • High-Carbon, Heat-Treated Steel. • 47° Stem Angle. • 7/16” Bolt holes (2). • 1-5/8" to 1-3/4" Hole spacing. Stay-Wide design maintains the specified cutting width throughout the life of the sweep.
- Field Cultivator Sweep 4.5" x 7.5 MM Thick w/ 2 - 7/16" Bolt Holes Viper Series - Field Cultivator Sweep "47° WCC" Viper Series • High-Carbon, Heat-Treated Steel. • Flanged Wing. • 47° Stem Angle. • 7/16” Bolt holes (2). • 1-5/8" to 1-3/4" Hole spacing. Stay-Wide design maintains the specified cutting width throughout the life of the sweep.
- Field Cultivator Sweep 4" x 6 MM (0.236") Thickness w/ 2 - 7/16" Bolt Holes - Field Cultivator Sweep "47° WCC" Series • High-Carbon, Heat-Treated Steel. • 47° Stem Angle. • 7/16” Bolt holes (2). • 1-5/8" to 1-3/4" Hole spacing. Stay-Wide design maintains the specified cutting width throughout the life of the sweep.
- Row Crop Cultivator Sweep 18" x 6.35 MM (0.25") Thick w/ 2 - 7/16" Bolt Holes - Row Crop Cultivator Sweep • High-Carbon, Heat-Treated Steel. • 54° Stem Angle. • 7/16” Bolt holes (2). • 2” Hole spacing. • Center hole for 5/8" carriage bolt. Patented design utilizes 70% of the cutting blade/edge inclined at an optimum angle of 30°. Requires 35% - 50% less load weight on the machine to penetrate hard soil zones when compared to conventional chisel plow sweeps. Designed for high-speed cultivation of growing crops.
- Row Crop Cultivator Sweep 16" x 6.35 MM (0.25") Thick w/ 2 - 7/16" Bolt Holes - Row Crop Cultivator Sweep • High-Carbon, Heat-Treated Steel. • 54° Stem Angle. • 7/16” Bolt holes (2). • 2” Hole spacing. • Center hole for 5/8" carriage bolt. Patented design utilizes 70% of the cutting blade/edge inclined at an optimum angle of 30°. Requires 35% - 50% less load weight on the machine to penetrate hard soil zones when compared to conventional chisel plow sweeps. Designed for high-speed cultivation of growing crops.
- Row Crop Cultivator Sweep 14" x 6.35 MM (0.25") Thick w/ 2 - 7/16" Bolt Holes - Row Crop Cultivator Sweep • High-Carbon, Heat-Treated Steel. • 54° Stem Angle. • 7/16” Bolt holes (2). • 2” Hole spacing. • Center hole for 5/8" carriage bolt. Patented design utilizes 70% of the cutting blade/edge inclined at an optimum angle of 30°. Requires 35% - 50% less load weight on the machine to penetrate hard soil zones when compared to conventional chisel plow sweeps. Designed for high-speed cultivation of growing crops.
- Row Crop Cultivator Sweep 12" x 6.35 MM (0.25") Thick w/ 2 - 7/16" Bolt Holes - Row Crop Cultivator Sweep • High-Carbon, Heat-Treated Steel. • 54° Stem Angle. • 7/16” Bolt holes (2). • 2” Hole spacing. • Center hole for 5/8" carriage bolt. Patented design utilizes 70% of the cutting blade/edge inclined at an optimum angle of 30°. Requires 35% - 50% less load weight on the machine to penetrate hard soil zones when compared to conventional chisel plow sweeps. Designed for high-speed cultivation of growing crops.
- Row Crop Cultivator Sweep 10" x 6 MM (0.236") Thickness w/ 2 - 7/16" Bolt Holes - Row Crop Cultivator Sweep • High-Carbon, Heat-Treated Steel. • 54° Stem Angle. • 7/16” Bolt holes (2). • 2” Hole spacing. • Center hole for 5/8" carriage bolt. Patented design utilizes 70% of the cutting blade/edge inclined at an optimum angle of 30°. Requires 35% - 50% less load weight on the machine to penetrate hard soil zones when compared to conventional chisel plow sweeps. Designed for high-speed cultivation of growing crops.
- Row Crop Cultivator Sweep 8" x 6 MM (0.236") Thickness w/ 2 - 7/16" Bolt Holes - Row Crop Cultivator Sweep • High-Carbon, Heat-Treated Steel. • 54° Stem Angle. • 7/16” Bolt holes (2). • 2” Hole spacing. • Center hole for 5/8" carriage bolt. Patented design utilizes 70% of the cutting blade/edge inclined at an optimum angle of 30°. Requires 35% - 50% less load weight on the machine to penetrate hard soil zones when compared to conventional chisel plow sweeps. Designed for high-speed cultivation of growing crops.
- Row Crop Cultivator Sweep 6" x 6 MM (0.236") Thickness w/ 2 - 7/16" Bolt Holes - Row Crop Cultivator Sweep • High-Carbon, Heat-Treated Steel. • 54° Stem Angle. • 7/16” Bolt holes (2). • 2” Hole spacing. • Center hole for 5/8" carriage bolt. Patented design utilizes 70% of the cutting blade/edge inclined at an optimum angle of 30°. Requires 35% - 50% less load weight on the machine to penetrate hard soil zones when compared to conventional chisel plow sweeps. Designed for high-speed cultivation of growing crops.
- Culti Vision Cultivating Tractor for John Deere IH Ford New Holland Case
- Wil-rich Field Cultivator Shank Mounting To Tube AssemblyFor A 2-5/8 Square Tube - Item is in very good condition some light surface rust bolt holes are in good condition for 2-5/8” square tube.
- Wil-rich field cultivator flat shank 9/16” thick x 1-3/4” wide - Good usable shank not bent broken or welded has a single down pressure spring used prior to 1998.
- Heavy Machinery Machine Part Plow Combine ?? - I don't know what it is. The largest marking on it says RC47.
- The Guide Cultivating Tractor 3 Pt. Guidance System - Guidance System.
- Precision Cultivator Units - SUKUP Replacement - PRECISION CULTIVATOR UNITS - SUKUP REPLACEMENTUpgrade your old Sukup cultivator with the new and improved Renyson cultivator units. They are more resistant and durable than the original ones, all the pieces are thicker and reinforcements have been placed in weak points. Bushing-Pins are thicker, made with T1 steel and machined with CNC precision, that guarantees you a precise cultivation.Features:16" Gauge wheels20" Coulter disc13" Front border discs2- Side ShieldsRear wings with adjustable widthReplacement for Sukup cultivators parts, Sukup 9400, Sukup 4200, Sukup 600
- Replacement JD Hub Disc 630, 637, Cultivator 1810, 1820, 1890 & 1895 AN183318 - Replacement JD Hub Disc 630 637, Cultivator 1810 1820 1890 1895.
- Spring Loaded Heavy Duty Field Cultivator - Support For Heavy Harrow - Most relevant conversion 383 mm - 15 5/64. 817 mm - 32 11/64.
- Makita String Trimmer Grass Cutter Couple Shaft Power Head Attachment Equipment - : 8.2 in Product Height (in.). : 5.1 in Product Width (in.). It quickly attaches to the power head for easy operation. The steel drive shaft is engineered for lower vibration and longer service life.
- S-Tine Sweep, Danish style Cultivator 1/4" x 2-3/4" single hole VS2E (lot of 10)
- Will Rich 24' Field Cultivator - Not sure of the model number. Could be a 2500 from what I see online. Replace 95% of the sweep shovels with new shovels and bolts. Only ones we didn't replace were still in great condition. tires have a range of 40-70% tread on them as there are 6 total tires with age cracks on a couple of the tires.
- Cultivator Parts, Cresent Hoe 6 X 1/4 Left Hand S1017L - Vegetable crescent hoe left hand.
- PITTSBURGH CULTIVATOR TOOLBAR SHANK with CLAMP - It is in good usable condition with no breaks or welds.
- (10) M12-1.5 Or M12 Fine Thread Nylon Insert Lock / Stop Nut Zinc Plated 8.8 - Zinc Plated. M12-1.5 Fine Pitch. Quantity: 10 nuts. Part Number: M12-1.5LHN. We are located at: Brooks Ag Parts LLC.
- (10) M12-1.75 Or M12 Coarse Thread Nylon Insert Lock / Stop Nut Zinc Plated 8.8 - Zinc Plated. Quantity: 10 nuts. Part Number: M12-1.75SL.
- 4" x 1/4" x 47° Stem Cultivator Sweep with 1-3/4 in. bolt centers - It has a 1-3/4 in. bolt center and requires 7/16 in. Stem angle: 47°. Mounting pattern: 1-3/4" bolt center. Requires two 7/16" grade 5 plow bolts with # 3 head. Part Number: 15515. Ohio Residents Only.
- Cultivator Reversible Point , 3/8Bolt on 1-1/2 to 1-3/4 cntrs
- Vintage cultivator point nearly new old stock 8 inch
- Heavy Steel B5299 Row Crop Cultivator 8HSSUW4 Osmundson Field Cultivator Sweep - Dust and Dirt but in good working condition.
- Field Cultivator Sweep Harrow Tooth 1/4" Steel Shank Protector 1 3/4"" X 11"
- Agricultural Field Cultivator Sweep Harrow Tooth Shank Protector 2" X 10"
- Pittsburgh Cultivator Shank
- Knock on point adapters for cultivatoir shanks
- S Tine Sweep 2 Hole 2-3/4" Wide 7/16" Holes 1/4" Thick Cultivator set of 8 - This is for EIGHT 2 Hole S Tine Sweep. This sweep is 2-3/4" wide, 1/4" thick steel, 7" from the back of the blade to the front tip, and has 2 7/16" holes for 3/8" bolts.
- S Tine Sweep 2 Hole 2-3/4" Wide 7/16" Holes 1/4" Thick Cultivator set of 6 - This is for SIX 2 Hole S Tine Sweep. This sweep is 2-3/4" wide, 1/4" thick steel, 7" from the back of the blade to the front tip, and has 2 7/16" holes for 3/8" bolts.
- 92407 7" 1/4" Thick Agricultural Field Cultivator Sweep 1 3/4" CTC 7/16" Bolts - To keep cost down we try and use flat rate boxes whenever possible.
- Heavy S-Tine Sweep,5/16" x 4 Danish Cultivator,Two 7/16 Holes (lot of 10) - Bolt holes 7/16".
- (2) 9" shovels for field cultivator(1 bolt mount) Part # PAF4787462 (DK) Tag#325
- (2) John Deere coil tine harrow teeth (DK) Tag #147 - 2 John Deere coil tine harrow teeth. Hours of Operation (EST).
- (6) Miscellaneous cultivator sweeps (DK) Tag #125 - Sat: 8:00am - noon. Hours of Operation (EST).
- (4) 13" double coil tine spring loaded double points (DK) Tag #128 - Hours of Operation (EST).
- JD 750 no till drill blade opener 18" straight Part # K187500 (DK) Tag #334 - John Deere 750 no till drill blade opener 18" straight Part # K187500. Sat: 8:00am - noon.
- John Deere 20 series tractor coweling w/ 1 small handle Tag #327 - John Deere 20 series tractor coweling with one small handle. Sat: 8:00am - noon.
- (2) New Holland left side panels & screen (DK) Tag #329 - (2) New Holland left side panels and screen. Sat: 8:00am - noon.
- New Chisel Points Plow Type AGRICARB SCK6064B To fit : Kockerling - THIS ITEM IS SURPLUS. BOX/ITEM MAY SHOW SIGNS OF DUST / WEAR / WRITING / SCRATCHES / GREASE FROM STORAGE. You will receive a response within 24 hours.
- John Deere Vibrating Shank Field Cultivator, Model C11 With Gauge Wheels - John Deere vibrating shank 3 point field cultivator. Cat 2 or cat 3 tractors. Located in 75468 area of southeast Lamar County. Can load.About 13 feet wide.
- John Deere 4 Row RG4 Cultivator W/ Rolling Shields - Expect many more increases until he leaves office.
- 4-CNH 6100323128 Bolts & Nuts Kit Vibro Till 8200 DF Kongskilde Cultivator Tine - CNH # 6100323128. 50 bolts and nuts per box 12mm 1.75 X 1-1/2in long.
- Cultiva Marker LT GPS Cultivator Cultivating
- Cultivator Point Nichols Creaser #1 5/16x5x7 - Creaser 5/16x5x7.
- Cultivator Point, 2-1/2" wide 10 long, 1-1/4 to 2-1/4 cetnters IF110UB - Fits hole centers 1-1/4 to 1-3/4 hole centers.
- Cultivator Point,Row Crop Cultivator 2-1/2" wide 10 long, 1-3/4 cntrs IF110
- Cultivator Point, Row Crop Cultivators 2" wide 10" long 5/16 thick IF210
- Furrower 6" Buster 2-1/4 centers holes, 7/16 bolt size, 3/16 thick F27-3-06 - Furrower and Busters punch with two holes on 2-1/4 Centers for 7/16 plowbolts and one square hole for 5/8 carriage bolt.
- Cultivator S Tine Danish Style THE BEST ON THE MARKET *NEW SUPER FAST SHIPPING*
- NEW! One Row Cultivator Implement W/Heavy Angle Iron Frame Cat. 1 - WEIGHT LBS. LIMITED WARRANTY 1 Year. HITCH TYPE 3-pt. CONSTRUCTION Steel. CATEGORY TYPE 1.
- CHISEL PLOW POINTS WELD ON CHROME CAP 2" lot of 10
- NEW! 6' Gear Driven Rotary Tiller Implement with Adjustable Feet Category 1!! - Behlen Country Rotary Tiller is the answer to your large are tilling needs. The heavy duty cast iron gearboxes feature 100% gear driven reliability with the protection of oil lubrication and a slip clutch PTO drive shaft.
- NEW! 4' Gear Driven Rotary Tiller Implement with Adjustable Feet Category 1!! - Behlen Country Rotary Tiller is the answer to your large are tilling needs. The heavy duty cast iron gearboxes feature 100% gear driven reliability with the protection of oil lubrication and a slip clutch PTO drive shaft.
- NEW! 5' Gear Driven Rotary Tiller Implement with Adjustable Feet Category 1!! - Behlen Country Rotary Tiller is the answer to your large are tilling needs. The heavy duty cast iron gearboxes feature 100% gear driven reliability with the protection of oil lubrication and a slip clutch PTO drive shaft.
- Reversible point, S-tine cultivator HD 60x6x260 (2" wide x10 long) 20ea - Used with 45 mm (1-3/4) wide tines.
- Cultivator point 10-1/2x1-3/4x5/16 1-3/4 hole cntrs CC3
- Sweep, Row Crop,Joyce Cotton 8x1/4 2-1/4 hole cntrs 55 degree 112-08 - Center hole for 5/8 carriage bolt.
- Cultivator Point, Heavy Cultivator Steels 2" wide 11" long 1/2 thick. 169UB
- Ball Joint, Spherical Ball 1 ID 2 OD 7466 - Danuser Ball Joints are manufactured for use in a variety of applications.
- Ball Joint, Spherical Ball 1-1/4 ID 3-1/8 OD 5925 - Danuser Ball Joints are manufactured for use in a variety of applications.
- Ball Joint, Spherical Ball 3/4 ID 2 OD 5868 - Danuser Ball Joints are manufactured for use in a variety of applications.
- S-tine Clamp 2x2 Heavy Duty Unpainted, Danish Style. 1/4 thick. - Clamp fits 2x2 bar and 1-1/4(32mm) wide S-tine.
- Cultivator Sweep, Row Crop 4" x1/4 55' stem angl 7/16 bolt 2-1/4 hl cntr E150-4 - Universal Sweep 4".
- Point Cultivator CC33 - Reversible Point.
- DT3 WIESE Dual Tillage Cultivator Knife - Note picture for lots of rust on the knife. Ours does not have any tubes and we do not have any tubes available. We are happy to help.
- S-tine Clamp fits 2" square bar C41-0004 - Danish style s-tine clamp fits 2x2 bar or tube.
- Danish Sweep Single Hole Lot of 2 - 7” 1/4" Thick 7/16" Square Hole Cultivator - This is for TWO 7" Single Hole Danish Sweep. This is for 2 - 7" Single Hole Danish Sweep. This sweep is 7" wide, 1/4" thick steel, 5-1/2" from the back of the blade to the front tip, and has a single 7/16" hole for a 3/8" bolt.
- Chisel Plow Point Chromium Carbide 3" Cap Weld on
- Hoe, Tender Plant Cultivator 9 X 3/16 Right Hand S1124R - Tender Plant Hoe 9" x 3/16 Left Hand Mfg part #S1124R.
- Hoe,Tender Plant Cultivator 9 X 3/16 Left Hand S1125L - Tender Plant Hoe 9" x 3/16 Left Hand Mfg part #S1125L.
- CULTIVATOR PACKER - Commercial - 48" Working Width - Presses Seeds into Ground - Working Width: 48". Lower 48 United States. within the Lower 48 United States. Model Number Construction: 3/16" Steel. Minimum Horsepower to Operate: 15 Hp. Phone (Toll Free): 1-.
- Cultivator Point, 9" Row Crop Cultivator Sweep 47 degree 1-3/4 hole cntr 924-9H - Fits hole centers 1-3/4. Bourgault, Crustbuster, D.M.I., Harris, Ingham, John Deere 960 Series, Kewanee, Landoll, Sunflower.
- Cultivator Point,Fertilizer Point 2" Wide 9-1/2 Long 5/16 thick. IF021 - 1-1/2X5/16X9-1/2.
- Row Crop Cultivator 24" Sweep 55 degree 7/16 bolts 2" hole centers 224-24 - Fits hole centers 2".
- Peanut Sweep 16" Wing Span 1/4 Thick 7/16 bolts 1-1/4-2" Centers 824-16 - 16" Peanut Sweep.
- CHISEL PLOW PARTS,PLOW TRIP SPRING 2.36" diameter 14" free length - Chisel plow shank assembly spring. Originally manufactured for the Hess plow, but is similar to other manufactures.
- Cultivator Point,Row Crop Cultivators 3" wide 10" long, 1-3/4 centers IF310 - Fits hole centers 1-3/4.
- Irrigation Shovel 7", Cultivator Parts, Single 3/8 hole, 3/16 thick S1027 - 7" Irrigation Shovel.
- Irrigation Shovel 6", Cultivator Parts, Single 3/8 hole, 3/16 thick S1026 - 6" Irrigation Shovel.
- S-Tine,Danish Style Cultivator Heavy Duty Tine. 32X12X560 MM (1-1/4X1/2X22") - Standard S-tine without point, single hole.
- S Tine, Danish Style Standard Tine.1-1/4X3/8X22" (32X10X560 mm) Cultivator Shank - Standard S-tine without point, single hole.
- Row Crop Cultivator Sweep 9" 47 degree 1-3/4 hole cntr 1/4 thick 202-9-4 - Fits hole centers 1-3/4. IHC, Kent, Vibrashank, Winpower, Will-Rich, Bourgault, Hiniker, Massey Ferguson 259, Heston.
- Chisel Plow Point, 16" Sweep 5/16 Thick- Heavy Duty 2 1/4 Hole Cntr F50-16-5Kp - Takes 1/2 plow bolts on 2 1/4 spacing.
- New Hss Threading Tool Straight Shank 1 1/8-7 - HSS THREADING TOOL STRAIGHT SHANK. NEW, in box. NEW, no box. NEW, old inventory. When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Warranty Information.
- Cultivator Row Crop Sweep, 12" x 1/4" with 54 Degree Stem Angle - Wide and 1/4 in. It also has the popular three hole pattern that is consistent with most machines and allows for a steady row or weed ripper. This low sweep moves less soil for low tillage work and has a 54 ° stem angle.
- Cultivator Row Crop Sweep, 10" x 1/4" with 54 Degree Stem Angle - Wide and 1/4 in. It also has the popular three hole pattern that is consistent with most machines and allows for a steady row or weed ripper. This low sweep moves less soil for low tillage work and has a 54 ° stem angle.
- Cultivator Row Crop Sweep, 4" x 1/4" with 54 Degree Stem Angle - Wide and 1/4 in. It also has the popular three hole pattern that is consistent with most machines and allows for a steady row or weed ripper. This low sweep moves less soil for low tillage work and has a 54 ° stem angle.
- S-tine Sweep, Danish, 1/4" x 4" DANISH TYPE, SINGLE BOLT HOLE
- FIELD CULTIVATOR PARTS, S-TINE SWEEP, 1/4" x 7" DANISH TYPE, SINGLE BOLT HOLE
- S-Tine Sweep, Danish style Cultivator 1/4" x 10" DANISH TYPE, SINGLE BOLT VS10
- Weeder Or Thatcher Replacement Teeth- 18"" Long- Curved Style Hookup- King Style - Curve wrapped end for hookup / king style. We also carry the tooth with the wrap hookup. 18" long with 3/8" square mounting hole. I hope this makes sense to you. This will automatically calculate at checkout.
- FIELD CULTIVATOR PARTS, S-TINE SWEEP, 1/4" x 9" SWEEP, SINGLE BOLT HOLE - Here are the specs for the S-tine sweep. uses a 3/8" elliptical bolt. 1 mounting hole. I hope this makes sense to you. YOUR #1 PARTS DISTRIBUTOR.
- FIELD CULTIVATOR PARTS, S-TINE SWEEP, 1/4" x 7" SWEEP, SINGLE BOLT HOLE - Here are the specs for the S-tine sweep. uses a 3/8" elliptical bolt. 1 mounting hole. I hope this makes sense to you.
- Field Cultivator Parts, S-Tine Sweep, 2-3/4" X 3/16" Thick, Single Bolt Hole - Here are the specs for the S-tine sweep. uses a 3/8" elliptical bolt. 1 mounting hole.
- (6) 7/16" X 1-1/2" Plow Bolt, Plow Bolts, Grade 5-We Carry All Sizes - This sale is for (6) 1-1/2" x 7/16" PLOW BOLTS, LOCK WASHERS & NUTS grade 5.
- (6)-- 7/16" X 2" Plow Bolt, Plow Bolts, Grade 5-We Carry All Sizes - This sale is for (6) 2" x 7/16" PLOW BOLTS, LOCK WASHERS & NUTS grade 5.
- (6) 3" 7/16" X 3" Plow Bolts, Plow Bolts, Grade 5-We Carry All Size Plow Bolts - This sale is for (6) 3" x 7/16" PLOW BOLTS, LOCK WASHERS & NUTS grade 5.
- Cultivator Parts,12 Alligator Washers,Covington Dpe8, Cultivator Washers - This sale is for (12) ALLIGATOR WASHERS. They have grooves cut in them to lock into the grooves on the brackets.
- Cultivator Parts,6 Alligator Washers,Covington Dpe8, Cultivator Washers For Most - This sale is for (6) ALLIGATOR WASHERS. They have grooves cut in them to lock into the grooves on the brackets.
- Field Cultivator Parts, S-Tine Sweep, 8-1/8" X 1-3/8" X 1/4", Cultivator Sweeps - Here are the specs for the S-tine sweep. uses a 3/8" elliptical bolt. I hope this makes sense to you. Our part number SC008. 1 mounting hole.
- Operators Manual Allis-Chalmers 101 & 201 Cultivators - Genuine Factory Manual in excellent used condition. Dated August, 1976.