VWR Lab Oven 1320 with Warranty SEE VIDEO - VWR Lab Oven 1320 ID 18615. This drying oven can be helpful in batch testing, aging tests, electronic burning, preheating process, stability testing, glassware drying, and sterilizing. This laboratory has perforated shelving that allows gentle airflow as the heat rises naturally from the base.
Techne Roller-Blot Hybridiser Oven Model - FHB-3D Lab - This Techne Roller-Blot Hybridiser Oven Model - FHB-3D was removed from a university lab where it was surplus to requirements.The item powers on and has been tested with a digital thermometer (not included).We set the temperature to 37˚c which it reached quickly (the thermometer reading was slightly higher), then we set to it's maximum temperature of 85˚c, which again reached quickly and the thermometer was reading 88˚c.The unit is in reasonably good cosmetic condition with some marks from use.Inside dimensions - L30.5 x W27 x D10cm NOTE: No cables, remotes, accessories, power supplies, consumables or any other item is included unless shown in the item photo or is in the item description. Grade GradeConditionFunction 1 New or As New New or As New.
CEM MDS-2000 Microwave Digestion Oven Model no. 924010 Lab - This CEM MDS-2000 Microwave Digestion Oven Model no. 924010 was removed from a university lab where it was surplus to requirements.The unit powers up, the lights work and the rig rotates. We were unable to test it further as the transducer requires a pressure calibration. An engineer visit is required.External Dimensions (Without Pipe) - D66 W48 H49cmInternal - D37 W40 H23.5cm12 'cups' inside with a diameter of 39.37mm.The item is in a reasonable, used cosmetic condition. The extraction pipe is well-used.The is also a box of spare bits including 20 x Tube holders (18.73mm diameter hole), lids, and a manual. NOTE: No cables, remotes, accessories, power supplies, consumables or any other item is included unless shown in the item photo or is in the item description. This item is only suit.
Corsair Manufacturing Model: CH 306 Laboratory Drying Cabinet Lab - This Corsair Manufacturing Laboratory Drying Cabinet Model: CH 306 was removed from a university lab where it was surplus to requirements.The item is in reasonable cosmetic condition but with marks and stains from use.Internal dimensions:78cm W x 31cm D x cm 42cm HThe unit powered on without issue and was tested with a digital thermometer (not included).When set to 3 on the dial the temperature reached 54.4˚C as measured by the thermometerWhen set to 6/Full on the dial the temperature reached 70.5˚C as measured by the thermometer NOTE: No cables, remotes, accessories, power supplies, consumables or any other item is included unless shown in the item photo or is in the item description. Grade GradeConditionFunction 1 New or As New New or As New 2.
UVP HB-1000 Hybridizer Hybridization Oven P/N 95-0030-02 Lab - This UVP HB-1000 Hybridizer Hybridization Oven was removed from a university lab where it was surplus to requirements.The unit powers up and has been tested with a digital thermometer (not included).It was tested at 37˚C and the thermometer measured 38.5˚C. It was then tested at 99.9˚C. It reached 96.7˚C on the display and the thermometer measured 94.1˚C. The rotary oven is working but there are no tubes included.It is in reasonably good cosmetic condition but there is a scorch mark on the back of the oven inside. NOTE: No cables, remotes, accessories, power supplies, consumables or any other item is included unless shown in the item photo or is in the item description. Grade GradeConditionFunction 1 New or As New New or As New 2 U.
Salvis Thermocenter Laboratory Oven Type TC-40 B Lab - This Salvis Thermocenter Laboratory Oven Type TC-40 B was removed from a university lab where it was surplus to requirements.The unit powers up and has been tested with a digital thermometer (not included).When set to 40˚C the thermometer measured 40.7˚C.When set to 200˚C the thermometer measured 205.5˚C.It is in good cosmetic condition with some surface marks on the back and the sides of the unit. It is missing two feet but could be easily replaced as they screw in. NOTE: No cables, remotes, accessories, power supplies, consumables or any other item is included unless shown in the item photo or is in the item description. Grade GradeConditionFunction 1 New or As New New or As New 2 Used, in excellent condition.
Techne Hybridiser Rotary Hybridisation Oven HB-1D Model - FHB1DE Lab - This Techne Hybridiser HB-1D Model - FHB1DE Rotary Hybridisation Oven was removed from a university lab where it was surplus to requirements.The unit powers up and has been tested with a digital thermometer (not included).When set to 37˚C the display showed 37˚C and the thermometer measured 37˚C.When set to 104˚C the display showed 104˚C and the thermometer measured 104˚C.The unit is in reasonably good cosmetic condition with some marks from use.Inside dimensions - D20.5 W26 H34cm NOTE: No cables, remotes, accessories, power supplies, consumables or any other item is included unless shown in the item photo or is in the item description. Grade GradeConditionFunction 1 New or As New New or As New 2 Used, in excellent condition.
Fisher Scientific OV700F 13-247-725F Precision 3050 Forced Air Oven - Material: OV700F 13-247-725F Precision 3050. OEM: Fisher Scientific. Includes Necessary Power Cords: Yes. Local Pickup Twinsburg, OH 44087. 1755 Enterprise Parkway Suite 400. Evidence of paid in full order and identification are required for local pickup.
101 Series Electric Heating Blower Dryer University College Lab Drying Ovens - Constant temperature mode: forced convection is adopted depending on fan and independent duct. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Vacuum Drying Ovens Lab Powder Drying Ovens 304 Stainless Steel Inner Liner DZF- - It is used for powder drying, baking, disinfection and sterilization, and can pour inert gas into the interior. B stands for 304 stainless steel inner liner A stands for sprayed inner liner. Compared with the ordinary drying relying on air circulation, the powder sample will not be blown or moved by the flowing air.
Vita Vacumat 6000 M - Automatic prevention of condensation in the firing chamber (VITA AntiCon). An automatic cleaning function (VITA SpecialClean). Reduce your energy bills by up to 70 % with VITA Energy Efficiency.
MIHM-VOGT Sinterofen Type HT-S - Dental Furnace Oven  - This unit is in great working condition and was recently removed from a dental lab.This unit will be shipped freight and there is an additional charge if it is not shipped to a commercial address with dock or forklift.
Barnstead Thermolyne 1400 Furnace Model# FB1415M 120V Lab Benchtop Furnace - Barnstead Thermolyne High Temperature Furnace with Ceramic Fiber Insulation. Powers OnVersatile and economical Barnstead/Thermolyne furnaces are specifically designed for ashing organic and inorganic samples, determining volatile and suspended solids, gravimetric analysis, heat treating of small steel parts, and ignition tests.
Genlab Wykeham Farrance Laboratory Oven Model - N50CF Lab - Item condition: Used This Wykeham Farrance Laboratory Oven Model - N50CF was removed from a university lab where it was surplus to requirements.The unit powers up and has been tested with a digital thermometer (not included).It was first set to just under 40˚c. It reached around 37-38˚c very quickly.We then set it to 100˚c which it reached after 10 minutes.Then the maximum temperature of 250˚c. It reached 265˚c after running for an hour.It is in reasonably good cosmetic condition but has marks from use.External Dimensions - D60 W61 H60cmInternal - D29 W49 H33.52 Shelves - 48 x 29cm NOTE: No cables, remotes, accessories, power supplies, consumables or any other item is included unless shown in the item photo or is in the item description. This item is only suitable for pallet deliver.
Townson & Mercer Vacuum Oven - This Townson & Mercer Vacuum Oven was removed from a university lab where it was surplus to requirements.The item is in reasonably good cosmetic condition with marks and scratches from heavy use.Internal dimensions:34cm D x 28cm W x 28cm HThe item powered on without issue but the dial couldn't physically be turned higher than 2.5. We have tested it under a vacuum and it is working as it should. NOTE: No cables, remotes, accessories, power supplies, consumables or any other item is included unless shown in the item photo or is in the item description. The price includes free economy delivery (3-5 working days) to mainland UK addresses excluding Northern Ireland and the following postcodes, where surcharges may apply - please enquire before ordering. AB31-38, AB40-52, AB54-56, AB63 IV1-28.
Sheldon Manufacturing Shel Lab Agilent Hybridization Oven Model: G2545A Lab - This Sheldon Manufacturing Shel Lab Agilent Hybridization Oven Model: G2545A was removed from a university lab where it was surplus to requirements.The item is in good cosmetic condition but there are scratches on the bottom of the door as well as some light stains on the top panel.There are no other noticeable cosmetic issues. The interior is clean with minor signs of prior use and the rotor is in good condition.The item powers on and the rotor sped up and slowed down in accordance with the dial inputs.The oven was tested with a digital thermometer (not included).The temperature was set at 37˚C, the display showed 37˚C and the thermometer 41.6˚CThe temperature was set at 67˚C, the display showed 67.1˚C and the thermometer 70.2˚CThe unit also comes with:14x boxes of slide holders, 5 per bo.
Blue M Mechanical POM-256B-1 Convection Industrial Oven 44" x 33" x 74" - Interior is stainless steel and has two (2)removal/adjustable shelves. This oven has an exhaust port and an adjustable fresh air intake mounted on the left hand side of the oven. Blue M Industrial Oven Model POM-256B-1HP.
Hoskins FD303A Electric Benchtop Tube Furnace 110V 5A - Reads at 21 ohms. The one side will need a simple wiring fix to reattach the wire.Some damage in one side of the tube as shown in the photos. Please ask any questions before buying.
Grieve NB-350 Lab Bench Industrial Drying Oven, 115V / USED !!! - 30 Days Returns for your Money Back! We promise a Great Purchase and Customer Service! Fast Processing, We Usually Package the Same day of Payment. Our customers are important to us, if you have any questions about our product please send us a message and we will be happy to assist you in the best way possible!.
Blue M Convection Curing Oven Cabinet 25x20x20 ID M2576 - Radiation Testers. Tool & Machine Components. Signals & Source Generators. External dims: 42" W X 32" D X 50" H. Stainless Steel Internal Chamber dims: 25" W X 20" D X 20" H. Good physical condition.
Blue M Convection Curing Oven Cabinet 25x20x20 ID M2575 - Radiation Testers. Tool & Machine Components. Signals & Source Generators. External dims: 42" W X 32" D X 50" H. Stainless Steel Internal Chamber dims: 25" W X 20" D X 20" H.Good physical condition. Door, lock and gaskets in excellent condition.
Shimadzu CTO-6A Column Oven Lab - This Shimadzu CTO-6A Column Oven was removed from a university lab where it was surplus to requirements.The unit is in reasonably good cosmetic condition but has some minor marks from use.It has been tested with a digital thermometer at 37 and 98˚C and seems to be working well. NOTE: No cables, remotes, accessories, power supplies, consumables or any other item is included unless shown in the item photo or is in the item description. The price includes free economy delivery (3-5 working days) to mainland UK addresses excluding Northern Ireland and the following postcodes, where surcharges may apply - please enquire before ordering. AB31-38, AB40-52, AB54-56, AB63 IV1-28, IV30-32, IV36-56, IV63, KA27-28, KW1-17, PA20-38, PA41-49, PA60-78, PH4-44, PH49-50, PO30-41, TR21-25, BT, GS, GY, HY.
Townson and Mercer - Laboratory Vacuum Oven Furnace Lab - Item condition: Used This Townson and Mercer Laboratory Vacuum Oven Furnace was removed from a university lab where it was surplus to requirements.The unit powers up but we were unable to test it further at our facility.It is in reasonably good cosmetic condition but has marks from use and age. NOTE: No cables, remotes, accessories, power supplies, consumables or any other item is included unless shown in the item photo or is in the item description. This item is only suitable for pallet delivery. The listed price is for economy delivery (3-5 working days) to mainland UK addresses excluding Northern Ireland and the following postcodes, where surcharges may apply - please enquire before ordering. AB31-38, AB40-52, AB54-56, AB63 IV1-28, IV30-32, IV36-56, IV63, KA27-28, KW1-17, PA20-38.
LEEC Model: LSS Laboratory Drying Cabinet Lab - This LEEC Laboratory Drying Cabinet Model: LSS was removed from a university lab where it was surplus to requirements.The cabinet is in reasonable cosmetic condition but has marks and stains from use. The interior is very clean over all. There are very minor signs of prior use on the 2 shelves.Internal dimensions:100cm W x 40cm D x 54cm HThe item powered on without issue and has been tested with a digital thermometer (not included).When set to 3 on the dial the temperature reached 40.5˚C as measured by the thermometerWhen set to Full on the dial the temperature reached 69.2˚C as measured by the thermometer NOTE: No cables, remotes, accessories, power supplies, consumables or any other item is included unless shown in the item photo or is in the item description. Grade GradeConditionFuncti.
Shel Lab 1445 Vacuum Oven 1.7 CU FT M2500 - Semiconductor & PCB Equip. Chamber vacuum tested for 24 hours without leaks. 36.0000 x26.0000 x36.0000. Reference Number. Tested OK. Excellent condition. This is a used item and has been checked for basic functionality.
Blue M OV-500C-3 Electric Convection Oven 260 Deg C 19x15x18 - Radiation Testers. Temp range 38 to 260 deg C. Tool & Machine Components. Signals & Source Generators. Reference Number. Stainless steel chamber. Door & gaskets checked out OK. Tested at 320 F.
Lab-Line Instruments 500 Series Beckman Industrial Vacuum Oven - Semiconductor & PCB Equip. Racks, Mounts, & Patch Panels. STEP MOTORS. Tested at 90 C. Checked out OK, you are buying the unit pictured. Reference Number. For parts or repair- This item is being sold as is, as pictured.
Lab-Line 3620 Duo-Vac Oven - Material: 3620. 1755 Enterprise Parkway Suite 400. Optional Notes: PAINT PEELING AND SCUFFS ON UNIT. Freight quotes will be provided promptly upon request, or one can select Local Pickup and manage the transportation pickup and expense directly.
Lindberg/Blue M M01490SA Mechanical Oven - Material: M01490SA. 1755 Enterprise Parkway Suite 400. reLink will attempt to replace product prior to issuing credit. Twinsburg, OH 44087. Evidence of paid in full order and identification are required for local pickup.
Shel Lab Bactron Glove Box - Material: Bactron. OEM: Shel Lab. Location: Twinsburg, OH. Freight quotes will be provided promptly upon request, or one can select Local Pickup and manage the transportation pickup and expense directly.
Shimadzu CTO-10A Column Oven M1168 - 20.0000 x22.0000 x15.0000. Reference Number. Temperature very stable at 45 deg c tested ok. Good working condition. Warranty Information. Product Information. STEP MOTORS. Electric/Motors/Breakers/Power.
Shimadzu CTO-10A Column Oven M1167 - 20.0000 x22.0000 x15.0000. Reference Number. Temperature very stable tested ok. Good physical condition. Warranty Information. Product Information. STEP MOTORS. Electric/Motors/Breakers/Power.
Shimadzu CTO-10A Column Oven M1166 - 20.0000 x22.0000 x15.0000. Reference Number. Temperature very stable, tested ok. Good physical working condition. Warranty Information. Product Information. STEP MOTORS. Electric/Motors/Breakers/Power.
Lab-Line Ultra-Clean 100 3499M-3 Oven - 1755 Enterprise Parkway Suite 400. Freight quotes will be provided promptly upon request, or one can select Local Pickup and manage the transportation pickup and expense directly. Material: Ultra-Clean 100 3499M-3.
Nordson BM200 Adhesive Melter Glue Oven for repair - Racks, Mounts, & Patch Panels. STEP MOTORS. For parts or repair- This item is being sold as is, as pictured. Unit does not turn on with main power switch. Reference Number. Unit needs to be fully cleaned.
Nordson BM200 Adhesive Melter Glue Oven - Could not start pump motor. (unit needs to be cleaned-remove adhesive). 72.0000 x54.0000 x106.0000. Reference Number. Unit looks complete. Front panel working good. Warranty Information. Product Information.
Yamato Drying Oven DX402C with Warranty SEE VIDEO - Yamato Drying Oven DX402C ID 18651. This Yamato Constant Temperature Oven has safety features such as warnings for temperature sensor errors and input circuit errors, and protections such as automatic overheating prevention and over-current protection.
202-00T/202-00S Electric Blast Drying Oven Laboratory Oven - 202-00T/202-00S Electric Blast Drying Oven Laboratory Oven Industrial Small Constant Temperature Electric Oven Galvanized Liner. Studio size 25 25 25cm. Timing range 0-999h. Standard number of partitions 2.
Blue M ESP400A Oven (FA2) - It powers on and heats up. We always make things right if there is a problem. If you select Local Pickup, you need to pick the item up within 72 hours of the sale being completed.
DT Paper Science Paper Dryer M0180 - Networking & Communications. 36.0000 x32.0000 x26.0000. Reference Number. 230V, 3 PHASE. This is a used item and has been checked for basic functionality. Warranty Information. Product Information. STEP MOTORS.
EASTEX Conveyor Oven 40x16 In M0160 - 220 V, 3PH, 7 KW. Conveyor dims: 40" L X 16 " W. 48.0000 x40.0000 x54.0000. Reference Number. Belt speed 0 to 45 ft/min. Tested up to 280 deg F. Opening width 19" both dies. Opening Height 9" Both sides.
Ivoclar Vivadent Programat CS Dental Furnace Restoration Lab Oven - FOR PARTS - Item Includes: Programat pump. Model: Programat CS. Manufacturer: Ivoclar Vivadent. The settings button does not work, the start button does not work and the back arrow does not work. Any party that unsuccessfully challenges the enforceability of this Choice of Law and Forum Selection clause shall reimburse the prevailing party for its attorney fees and costs associated with defending against the challenge of said clause.
Mellen SV Series Split Tube Furnace w/ Control System- Model SV11 - Do you have a forklift/loading dock to unload the pallet?. -Powers on. The unit did start to heat up. The thermocouples may need to be replaced. We did not test it to max temperature, just made sure it started to heat up.
Drying oven industrial digital temperature with excellent accuracy - DRYING OVEN INDUSTRIAL. Inner & outer chamber made out of thick mild steel sheet. Heavy duty forced air blowers are provided to constantly circulate hot air to achieve uniform temp. in the whole chamber.
Shimadzu Column Oven Door CTO-10AS VP - (Model CTO-10AS VP. for example, the condition specified is NEW and the item is USED. The main title does not necessarily describe the item specifically. agreed by us. available). wire transfer. requested otherwise.
Hybaid H9360 Laboratory Mini Hybridization Oven Rotisserie 95°C TESTED - This sale is for a Hybaid H9360 Laboratory Mini Hybridization. Oven Rotisserie 95°C. Lab Notes: Verified the incubator powers on, the rotisserie rotates. AVI52973/923/45/18 17 17/wa. The item must be in original condition with all seals intact.
I Square R, Starbar, Heating Element SER 25 X 10 X 0.75 ,0.75 Nominal ohms - I Square R Starbar, Print 1334, SER 25 X 10 X 0.75, 07.50 nominal ohms. The clamp is electrically insulated from the flat braid with high temperature insulation. Manufacturer: I Squared R. Heating industries with application temperatures over 540ºC (1000ºF).
Thermo Scientific Model 664 Compact Oven - Manufacturer: Thermo Scientific. Model: 664. Manufacturer Part Number: 664. We have over 10 years combined experience in Industrial Surplus. We love to hear from you. Serial Numbers must be verified.
Radyne Induction Heating Unit with Payoff and Recoiler - • MOTORIZED RECOILER WITH 3.5” OD DRUM. This unit Is used for coil-to-coil induction heating of your material. • INDUCTION COIL - HEAT ZONE: APPROX. 6” L X 2.25” W X 0.250” H • WATER TO WATER COOLING SYSTEM - S/N: AS2310A.
Ney Vulcan A-130 Dental lab - Jeweler -Dental -Dentist -Burnout Oven. - Ney Vulcan A 130 burnout oven very nice shape as you can see from pics. Fully tested by our in house tech. All works as it should no issues. Ran up to 2000 and held for 30 minutes. If nes sells for over $2400.00
Boekel Scientific Illumina 230402ILL Hybridization Oven - Material: Illumina 230402ILL. OEM: Boekel Scientific. reLink will attempt to replace product prior to issuing credit. Twinsburg, OH 44087. 1755 Enterprise Parkway Suite 400. Evidence of paid in full order and identification are required for local pickup.
Boekel Scientific Illumina 230402ILL Hybridization Oven - Material: Illumina 230402ILL. OEM: Boekel Scientific. reLink will attempt to replace product prior to issuing credit. Twinsburg, OH 44087. 1755 Enterprise Parkway Suite 400. Evidence of paid in full order and identification are required for local pickup.
Marshall 2011S 12 Inch Tube Furnace 1800F - Semiconductor & PCB Equip. Unit in in fair condition, furnace does power on. Racks, Mounts, & Patch Panels. STEP MOTORS. Tool & Machine Components. This is a used item and has been checked for basic functionaly.
Dns 8" Hotplate Oven - ALL CLAIMS MUST BE REPORTED AND ACKNOWLEDGED WITHIN 72 HRS OF RECEIPT. WE HAVE SEVERAL WAREHOUSES. WARRANTY IS NULL VOID IF ANY ITEM IS TAMPERED WITH, OPENED OR DISASSEMBLED. IF THERE ARE ANY PROBLEMS WITH THE ITEM DO NOT TRY TO REPAIR AND INVESTIGATE.
Binder Oven ED23 with Warranty SEE VIDEO - The Binder ED23 Drying Oven is a routine drying oven that can be used for sterilization and warm storage as well. This drying oven uses gravity convection for fast and uniform drying throughout the chamber.
Ney Centurion QEX Dental Furnace Restoration Heating Lab Oven Machine - Model: QEX. Manufacturer: Ney. Furnace Type: Sintering. 8/24/23 Attached unit to power, unit powered on. Ran cycle test, unit reached temp with no error codes thrown. Units cover opens and shuts with no complications.
VWR 89511-420 Gravity Convection Incubator - ReLink will attempt to replace product prior to issuing credit. Twinsburg, OH 44087. 1755 Enterprise Parkway Suite 400. Evidence of paid in full order and identification are required for local pickup.
Thermo Scientific 151030519 60L Gravity Oven - Material: 151030519. OEM: Thermo Scientific. reLink will attempt to replace product prior to issuing credit. Twinsburg, OH 44087. 1755 Enterprise Parkway Suite 400. Evidence of paid in full order and identification are required for local pickup.
Precision Scientific 51201067 CO2 6000 Incubator - Material: 51201067 CO2 6000. OEM: Precision Scientific. reLink will attempt to replace product prior to issuing credit. Twinsburg, OH 44087. 1755 Enterprise Parkway Suite 400. Evidence of paid in full order and identification are required for local pickup.
ToAuto Melting Furnace Model: TMF6000B-V3-Black - Introducing the ToAuto Melting Furnace Model: TMF6000B-V3-Black, perfect for all your smelting needs. Made in China with high-quality materials, this furnace/oven is ideal for use in businesses and industrial settings, as well as in hobbyists metal smelting. Items factory seal is unbroken and is in new condition.
Cm Rapid Temp Furnace - Vertical Tube (#4110) - For us to check rates, we need the following info: 1. We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided.
Kendro Heraeus Cytomat 2 C 450 S Automated Incubator (#4105) - For us to check rates, we need the following info: 1. Powers up! We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Kendro Heraeus Cytomat 2 C 450 S Automated Incubator (#4099) - For us to check rates, we need the following info: 1. Powers up! We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Kendro Heraeus Cytomat 2 C 450 S Automated Incubator (#4098) - For us to check rates, we need the following info: 1. Powers up! We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Fisher Isotemp Oven 516G with Warranty SEE VIDEO - This gravity oven has a temperature range of 5°C over ambient to 210°C with an accuracy of ± 2.0° and a capacity of 1.7 cubic feet. The door to this laboratory oven opens up to 180° for easy unloading and loading of samples.
VWR 1300 Gravity Convection Oven with Warranty SEE VIDEO - VWR 1300 Gravity Convection Oven ID 18638. This dependable drying oven features sturdy construction, a welded steel exterior, and a corrosive-resistant stainless interior sandwiched over 2" fiberglass insulation.
Vacuum Oven Double Walled Construction AjantaExports - Sterilization Tray SS Small AjantaExports. Syringe needle destroyer in stainless steel Healthcare AjantaExports. Vdrl Shaker With Digital Rpm Flask Shaker Blood sample shaker AjantaExports. Advanced Suture Practice Leg Anatomical Human Model AjantaExports.
Lewco Drum Oven EC08L - Frederick, MD 21704. 4845 Governors Way, Suite B. BaneBio is owned and operated by BaneBio.
CEM MARS5 230/60 907500 Microwave Accelerated Reaction System Digestion Oven - The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. No corrosion. A subset of the primary functions of the device that an ordinary user of the device expects to function are verified working through manual or software tests.
Corsair Manufacturing Model CH307 Drying Oven Cabinet Lab Spares/Repairs - This Corsair Manufacturing Model CH307 Drying Cabinet was removed from a university lab where it was surplus to requirements.It is in reasonable cosmetic condition but is missing a knob and a door handle.The unit powers up and has been tested with a digital thermometer. We were unable to set the temperature as it is missing the control knob. It reached 99˚C.Internal measurements L 100cm, H 65cm, W 38cm.Shelf measurements L 98cm, W 34cm.It is sold for spares/repairs due to the missing knob. NOTE: No cables, remotes, accessories, power supplies, consumables or any other item is included unless shown in the item photo or is in the item description. Grade GradeConditionFunction 1 New or As New New or As New 2 Used, in excellent conditio.
Lab Safety Supply 32Ez30 Oven,10 To 200 Deg.,+/- 1 Deg @ 100 Deg - Oven, Convection Type Gravity, Temp. Range (C) Ambient +10 Degrees to 200 Degrees, Overall Height 23.3 in, Overall Width 25.5 in, Overall Depth 33.3 in, Temp. 3.18, Capacity (ML) 90,000, Programmable No, Temp.
VWR Scientific 1400E VACUUM OVEN 9100641 120 V 5.5 A - The VWR 1400E Vacuum Oven features an all stainless steel interior with a temperature range of 40 to 200 Celsius. Model 1400E. We strive for excellence and appreciate the. SEE PHOTOS. All images taken in house of the unit(s) being sold, except for multiple quantities where item received will be in similar or better condition.
Thermcraft 1,200C Box Chamber Furnace - 1200 degrees C max temp industrial /lab furnace as pictured. Appears to be in great condition - see pics. Don’t know anything about this furnace. No guarantees on anything about this furnace - I have no way to test functionality, but it appears to be like new. Located in southwest Charlotte NC. Could possibly do freight shipping but the unit is very heavy.
Chun Yen CY-6623 Paper Testers Drying Oven Tester T87690 - Radiation Testers. Tested good at 220 C, 220 VAC, 1 PH, chamber dims: 17 1/2 W x 15 1/2 H x 17" D, stainless steel, very good physical condition. 34.0000 x32.0000 x38.0000. Reference Number. This is a used item and has been checked for basic functionaly.
T189197 Illumina Boekel 230402ILL Hybridization Oven - 95020 (408)886-3700. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Dental Ceramics Firing Furnace - Meta fire Dental Furnace. Same as Jeneric Pentrons 1200 model. Furnace is in great shape! Comes with pump. Requires 220 volts. Does not run on 120 volts.
Precision Scientific Thelco Model 5DG Laboratory Incubator Local Pick Up Only - Turns on and heats up but have not tested any other functionality. It’s on a media cart that is available for an extra $50. It has normal wear from being used in lab. We can not ship. Please do not ask. We are located 3 miles off I-270 Clarksburg exit.
Lab Companion OF-01E Natural Convection Oven to 220 Degrees C - Forced-air convection with a fan for better uniformity and high drying performance. 10°C above room temperature to 220°C. Pickup by your or carrier (arranged by you) preferred. Temperature Variation at 100°C±3.3°C / ±5.94°F.
CEM Disposable Crucibles 100 mL - This listing is for CEM Disposable Crucibles with a capacity of 100 mL. These crucibles are designed for use in laboratory furnaces and ovens. They are made from high-quality materials and are built to last. The brand of these crucibles is CEM, a trusted name in the industry.These crucibles are perfect for use in a variety of applications in the healthcare, lab, and dental fields. They are ideal for use with medical and lab equipment and devices. These crucibles are new and come in an open box. They are in excellent condition and are ready for immediate use. Thank you for considering this listing.
VWR Sheldon Manufacturing Inc. Shel Lab 1410 Scientific Products Vacuum Oven - Shel Lab 1410 Scientific Products Vacuum Oven. The item up for sale is not tested for functionality as we do not have the capability to test; Unit has been inspected and the results are as follows. Shel Lab 1410 Scientific Products Vacuum Oven. ".
Power Tested VWR Scientific Products Vacuum Oven Model 1400E 9100574 120V AC - The item up for sale is not tested for functionality as we do not have the capability to test; Unit has been inspected and the results are as follows. (Not included). I was able to power on the device using the included power cord.
Quincy Lab 10GC Gravity Convection Lab Oven - Small footprint - fits in any lab; high-quality at an economical price. UL and CSA recognized components in all ovens. Temperature range - Ambient +25°F - 450°F (232°F). This item may be missing necessary hardware / manuals / inserts/ power cords/ box covers/ accessories/ remotes/ wrenches/ chucks/ keys/ warranty cards/ bar codes/etc.
VWR Symphony Vacuum Oven, Cat. No. 414004-578 - (VWR Symphony Vacuum Oven, Cat. No. 414004-578. Dent on top right side. Temperature Range: 25° to 200°C. Electrical 120V, 60Hz. Weight 103.6 lbs. (46.99 kg). x 44.96 x 64.1 cm).
Barnstead Thermolyne Series 9000 0V47315 Oven @ (332512) - ((InvIDs))332512(((InvIDs))). Phone: (410) 782-0444. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. North Carolina 7.00%.
Across international vacuum oven STABLE TEMP-15 - From the latest technology to rare collectibles, and everything in between. Our expert team has vast knowledge across all of these categories. Condition:Used / Fully operational.
Whip Mix/ Inter Tech Pro 100 Porcelain Furnace W Pump Used Dental Lab Equipment - Whip mix inter tech pro 100 porcelain ovens. Complete set up includes pump and all wires and hose needed plus Manuel too. Very nice condition as you can see from pics. Fully tested by our in house tech. Ran thru several programs no problems. If new sold for $4895.00
Thermo Scientific Heratherm Oven, Model Oms100, Code 51028873, 104L, 3.65 Cu.ft - Model OMS100. Order Code 51028873. Perform routine applications simply and safely with Thermo Scientific Heratherm General Protocol Ovens. These ovens provide an ideal heating and drying solution for research, clinical or industrial needs.
Thermo Lindberg / Blue M HTF55342C Split-Hinge Tube Furnace 1200°C good shape - If you require a pallet for transport a fee may apply. We will respond to you within 24 hours and do our best to help you out! material for fragile content. We can have custom ISO certified heat-treated wood pallets, skids and crates built, if necessary.
Shimadzu RF-10A XL HPLC Liquid Chromatography Fluorescence Detector FLD #15984 - Item #15984. Shimadzu RF-10A XL Fluorescence Detector FLD. Shimadzu RF-10A XL Fluorescence Detector. Not tested for any analytical application (liquid) at our facility. Weight: approx. Simply inform the driver that you refuse to accept your item in this condition.
Ney Centurion Q50 Dental Furnace Restoration Heating Lab Oven Machine - Model: Q50. Manufacturer: Ney. Furnace Type: Sintering. 8/28/23 Attached unit to power source and vacuum pump. Unit fired on with no complications or error codes presented. Ran function test on unit to ensure functional.
Ivoclar Vivadent Programat CS Dental Furnace Heating Lab Oven - SOLD AS-IS - Item Includes: Programat. Model: Programat CS. Manufacturer: Ivoclar Vivadent. BUY AT YOUR OWN RISK. Hooked up this unit to power and ran a dehumidification cycle. This unit hits error 800: Final vac value not reached but still finishes the program its running.
Boekel Scientific 241000 InSlide Out Hybridization Oven 75°C w Insert 115 Volt - Boekel Scientific 241000 InSlide Out Hybridization Oven. Temperature Range Ambient +10° C to 75° C. Capacity with plastic slide holder: 18 - 1" x 3" slides only. Capacity with stainless steel rack: 20 - 1" x 3" slides, or various other sizes.
Whip Mix Vacuum Pump-High Efficiency 95015 - If the item is subject to state or FDA regulation, you may need to provide verification that you are an authorized user of this type of device. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Thermo Scientific 658 Gravity Convection Oven ! (332080) - ((InvIDs))332080(((InvIDs))). Phone: (410) 782-0444. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. North Carolina 7.00%.
Carbolite Laboratory Furnace Model - VCF 12/23 Lab Spares/Repairs - This Carbolite Laboratory Furnace Model - VCF 12/23 was removed from a university lab where it was surplus to requirements.The unit was fitted with a 32amp plug (not included) and powers up.We found it to have a "SnSr Fail". We were unable to test it further.it is sold for spares/repairs. NOTE: No cables, remotes, accessories, power supplies, consumables or any other item is included unless shown in the item photo or is in the item description. Grade GradeConditionFunction 0 Not Applicable Not Applicable 1 New or As New New or As New 2 Used, in excellent condition Item has been tested and is working 3 Used, in good condition but with some minor m.
BENCHMARK SCIENTIFIC BSH1002 Digital Dry Bath, 2 Block - BENCHMARK SCIENTIFIC BSH1002. Digital Dry Bath, 2 Block. Digital Dry Bath Block, Material Aluminum, Temp. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
Thermolyne Furnace Type 1300 - This Thermolyne Furnace Type 1300 is the perfect addition to any laboratory looking for reliable and efficient equipment. With its advanced technology and precise temperature control, it is ideal for a variety of applications in the medical and lab equipment industry. The brand Thermolyne is known for its quality products and this furnace does not disappoint. The furnace has been previously used but it is still in working condition. Its sleek design and user-friendly interface make it easy to use and operate. Whether you are a seasoned professional or just starting out in the field, this Thermolyne Furnace Type 1300 is a must-have for your laboratory.
4x4x6 Fully Welded Frame Gas/Propane Powder Coating Batch Oven - 4x4x6 Electric Batch Oven Fully Welded FrameDesigned to be Simple but effective! 12 Minute Ramp time!Mechanical contractor must be used for installation to maintain factory 1 year warrantyUnit comes standard with a SINGLE door. Double walled construction Stainless Steel Sheeting inside and out 12 Gauge plate steel flooringFlame retardent 1300F Rockwool insulation, as well as 8#density ceramic fiber insulation13A @ 120V3/4” supply line 4.6” minimum W.C. These follow NFPA code for safety features Powered 4” exhaust Please message us for Freight costs and current lead times.Thanks!
Boekel Scientific InSlide Out Hybridization Oven & Slide Rack 241000 - Tested - Up for sale is a Boekel Scientific InSlide Out Hybridization Oven, Slide Rack system, power cord and manual. Catalog 241000. Overall, the oven works great! Humidity is maintained by adding a small amount of hybridization solution to the tray.
Fisher Scientific Isotemp Oven - Model 103 Lab Oven - 230V / 4.5 Amp - As is our policy, we will do whatever it takes! WE STRIVE FOR ALL FIVES! If your log in attempts are unsuccessful you'll be automatically redirected to a secure page where you can enter your credit card information.
Dentspy Triad 2000 Used Dental Lab Supply, Dental Office - Dentsply triad 2000. Used for dental labs or dentist office. Cures all types of light curing materials. Very nice shape as you can see from pics. Fully tested by our in house tech. Top has small crack line does not effect operation. Top missing a nut but unit is fine as has other one ( see pics for this) if new sold for over $1595.00
Precision Thelco Lab Oven Cat # 51221147 (#4097) - For us to check rates, we need the following info: 1. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Precision Thelco Lab Oven Cat # 51221147 (#4096) - For us to check rates, we need the following info: 1. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Despatch LND Series Benchtop Oven With Stand - We don't know what it was exposed to before it got to us. This unit is being sold as a PARTS ONLY. You only get what you see in the pictures no power cord, cables, accessories or adapter is included.
Lindberg / Blue M MO1490A-1 Laboratory Mechanical Oven MAX: 260°C MIN: 40°C - - We are unable to test this item, therefore we are selling as is. - Item has some light scratches/scuffs, and other typical signs of use. - Includes only what is shown. - See images for item's detailed condition. - Please feel free to ask any questions or make an offer.
Binder Double Door Laboratory Oven Model - FD 240 Lab - This Binder Double Door Laboratory Oven Model - FD 240 was removed from a university lab where it was surplus to requirements.The unit powers on and is in good cosmetic condition. It is in full working order.It is in good cosmetic condition with some minor marks from use. It has had a brand new control knob and thermostat fitted recently.Inside dimensions - D50 x W80x H60cm2 Shelves - 45 x 79cm NOTE: No cables, remotes, accessories, power supplies, consumables or any other item is included unless shown in the item photo or is in the item description. This item is only suitable for pallet delivery. The listed price is for economy delivery (3-5 working days) to mainland UK addresses excluding Northern Ireland and the following postcodes, where surcharges may apply - please enquire before.
Quincy Lab 10GC Lab Oven - Temperature Range: Ambient +25 F to 450 F (232 C). Sold As Pictured. NOTE: Glass Thermomter is not included. NOTE: Unit has been powered on. Watts: 600.
Quincy Lab 40 GC Lab Oven - NOTE: Unit powers on. Temperature Range: Ambient +25 F to 450 F (232 C). Frequency/HZ: 60. Watts: 1500.
Digital muffle furnace 225x100x100mm WITH DHL SHIPPING - (A) 225x100x100mm (9”X4”X4”). Maximum Temp. 900 Degree C With Working Temp. • Out Side Body Made Up Of Heavy Gauge G.I. Duly Powder Coated Inner Muffle With High Temp. Insulating Material. Muffle Furnace Outer Body Is Made Of Thick Mild Steel Sheet.
Shimadzu CTO-10AS VP Column Oven, #15935 - Item #15935. Our testing very often is limited to power up test or basic functions available on the external keypad of the device (if available). Once you buy this item, it is yours to keep or if you are not satisfy with it you may dispose of it at your own expense.
Digital Forced Air Convection Drying Oven Shelf Load 33lbs Lab Supply 220V 1000W - 220V 101-0AB Digital Forced Air Convection Drying Oven. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
VWR 1430DS Vacuum Oven Stainless Steel - VWR 1430DS Vacuum Oven Stainless Steel - Item did not power on. - We are unable to test this item any further, therefore we are selling it for parts. - Unit is in good cosmetic condition with some light wear. - Chamber 12 x 12 x 20 (Height, Width, Length) - Includes only what is shown.
QUINCY LAB 10GC Analog Oven, 0.7 cu. ft. - QUINCY LAB 10GC. Analog Oven, 0.7 cu. Analog Oven, Convection Type Gravity, Temp. Range (C) Ambient 25 Degrees to 232 Degrees, Temp. Range (F) Ambient +25 Degrees to 450 Degrees, Overall Height 17.5 in, Overall Width 14 in, Overall Depth 12.25 in, Temp.
Espec PVC-212M Vacuum Oven - Our Freight Forwarder is Crystal Freight Services. Local GST for Singapore Sales: 8%.
Espec PH-202M Vacuum Oven - Our Freight Forwarder is Crystal Freight Services. Local GST for Singapore Sales: 8%.
Espec VAC-300PR Vacuum Oven - Our Freight Forwarder is Crystal Freight Services. Local GST for Singapore Sales: 8%.
110V Lab Digital Forced Air Convection Drying Oven Baking Heating Cabinet 1KW - 101-0AB Digital Forced Air Convection Drying Oven. The shell is made of high quality cold-rolled steel plate, surface electrostatic spraying. Large double layer toughened glass window is convenient to observe the changes of contents in the box.
Barnstead Thermolyne 1500 Heavy-Duty Muffle Furnace FD1530M - - This item is being sold as “For Parts/Untested”. No testing has been performed, therefore we are selling as is for parts. - Item has scratches/scuffs, and other typical signs of use. See images for item's detailed condition. - Includes only what is shown. Other accessories not included. - Please feel free to ask any questions or make an offer. - H4" X W4" X L9".
FLAWED Lindberg- Blue M Model BF51766A-1 Box Furnace 120VAC - FLAWED USED. We try to be as descriptive as possible for each item and represent each item in the pictures. 75LBS - 125LBS WITH SKID 40 48 30 CALEDONIA - Z1-D-7E. Our rates may vary from what is shown.
Lindberg- Blue M Model BF51766A-1 Box Furnace 120VAC - We try to be as descriptive as possible for each item and represent each item in the pictures. 75LBS - 125LBS WITH SKID 40 48 30 CALEDONIA - Z1-D-7E. Our rates may vary from what is shown. If you have to get a hold of us, look us up on the net.
VWR 1415M Laboratory Vacuum Oven 9100710 - - Item was pulled from a working environment. - Item tested to power on only. We are unable to test this item any further, therefore we are selling as is for parts. - Item has some light scratches/scuffs, and other typical signs of use. See images for item's detailed condition. - Includes only what is shown. Power adapter and other accessories not included. - Please feel free to ask any questions or make an offer.
VWR 1410 Benchtop Laboratory Vacuum Oven 9" X 9" X 11.5" Chamber - - This item is being sold as “For Parts/Untested”. No testing has been performed, therefore we are selling as is for parts. - Item has scratches/scuffs, and other typical signs of use. See images for item's detailed condition. - Includes only what is shown. Power adapter and other accessories not included. - Please feel free to ask any questions or make an offer.
Renfert Vario basic Recyclable and fine sandblasting unit - Recyclable and fine sandblasting unit. The compact combination of recyclable sandblaster and micro blaster. A cost-effective, for all relevant sandblasting work in the dental laboratory. Vario basic.
R188963 VWR Sheldon 1370FM-2 Horizontal Forced Convection Laboratory Oven 1370FM - It powered on with no problems and was warming up. It appears to have heated to set-point of 240ºc. ( Temperature range: Ambient +40ºC to +240ºC). "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Whip Mix Pro 100 Dental Furnace Restoration Heating Lab Oven Machine 120V - Manufacturer: Whip Mix. Furnace Type: Burnout,Sintering. 8/14/2023 Attached unit to power and vacuum pump from Atlas. Unit succesfully completed with no error. Unit fully functional.-KD. Item Includes: Power cord Firing table Pressure gauge.
Whip Mix Pro 200 Dental Dentistry Furnace Restoration Heating Lab Oven - Manufacturer: Whip Mix. Furnace Type: Burnout,Sintering. We can even help you find a technician in your area. Model: Pro 200. Chamber Shape: Round. We have years of experience and use only the best of materials to ensure you get exactly what you ordered.
TPS Blue M DC-336-C-F4T Mechanical Industrial Convection Oven Chamber - Used industrial oven, we used to heat fittings for a specific job. Unit was used for 317 hrs. In very good condition. We are the original owner, have all documents and original purchase quote and additional maintenance kit.
JKEM J-KEM DVR-200 Digital Vacuum Regulator Controller Rotary Evaporator 120V - This J-KEM DVR-200 Digital Vacuum Regulator Controller Rotary Evaporator is an essential piece of equipment for dental, medical, microbiological, and biological laboratories. With its United States manufacturing and high-quality materials, this unit is reliable and efficient. The vacuum regulator is designed to control the evaporation process, ensuring optimal results for laboratory experiments. The unit comes with a 120V power supply, making it easy to use in any laboratory setting. The J-KEM brand is known for its quality lab equipment, and this vacuum regulator is no exception. Whether you are a professional researcher or a student, this unit will help you achieve accurate and reliable results.
SalvisLab 31A04100 Lab Thermocenter Oven, 40 L Capacity, TC40, 115 VAC (PARTS) - High-quality insulation and Airtight design prevent heat loss. — these ovens heat your samples, not your lab. The heater and blower stop as soon as you open the oven door. Over temperature shutoff sounds an audible alarm to ensure that your samples will never overheat.
Williams Programat P90 IVOCLAR DENTAL CERAMIC FURNACE. - PROGRAMAT P90 Williams IVOCLAR DENTAL CERAMIC FURNACE. Sold as is. I do not have the power to test this machine, you are buying it as is, assuming that it might need parts or repair.
Only 220V Digital Muffle Furnace High Quality 225x100x100mm With Free Shipping - (A) 225x100x100mm (9”X4”X4”). Maximum Temp. 900 Degree C With Working Temp. • Out Side Body Made Up Of Heavy Gauge G.I. Duly Powder Coated Inner Muffle With High Temp. Insulating Material. Muffle Furnace Outer Body Is Made Of Thick Mild Steel Sheet.
Fisher Scientific 3510Fs Gravity Oven - DuBois, PA 15801. KMA Remarketing Corporation. After this information is collected, we will then get quotes from (3) three different carriers and pass on the best-priced quote to you. Does this location have a loading dock?.
Vita Vacumat 6000M Dental Furnace Restoration Heating Lab Oven Machine - Item Includes: Furnace, vac pump, power cord and the vacuum line, Vacumat manual. Model: Vacumat 6000M. Hooked it all together then plugged into power. Let the system run through its boot test, then reset the factory settings.
Fisher Scientific Model 280A Isotemp Vacuum Oven - FISHER SCIENTIFC ISOTEMP VACUUM OVEN MODEL 280A, POWERS UP, THERMOSTAT SEEMS TO BE WORKING PROPERLY. OVEN HEATS TO 375 DEGREES FAHRENHEIT, SEE PICS. OVEN HAS NORMAL SIGNS OF WEAR, SOME PAINT MISSING & RUST IN A FEW SMALL PATCHES, BUT IN OVERALL FAIR TO GOOD CONDITION. OVEN IS SOLD WITH POWER UP WARRANTY ONLY, NO WARRANTY & NO RETURNS ON THIS ITEM. ITEM WILL BE PACKAGED AND PLACED ON A SMALL PALLET, DUE TO WEIGHT AND DIMENSIONS, PLEASE SEND US YOUR COMPLETE SHIPPING ADDRESS, IF YOU'D LIKE SHIPPING COST TO YOUR LOCATION.
Hach Gravity Oven 35gm - This Hach Gravity Oven is a reliable and high-quality piece of equipment for any laboratory or business. Made by the trusted brand Hach, this oven boasts a 35gm capacity and is perfect for a variety of laboratory tasks. It is a great addition for any healthcare, lab, or dental facility and is especially useful for medical and lab equipment and device applications. Additionally, this oven is designed specifically for gravity and has a furnace/oven type that makes it perfect for a wide range of applications. With a unit quantity of one, this Hach Gravity Oven is a great investment for anyone looking for reliable and high-quality lab equipment.
2X Watlow Raymax 1525 Panel Heater - "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. 1988 E. Alpine Ave.
Blue M Electric Lab Oven - Blue M Electric Lab Oven . Condition is Used. Shipped with FedEx Ground or FedEx Home Delivery.
Across International VO-16050m 1.9cf vacuum oven - Used less than 100 hours, minor superficial dents in cabinet as shown in photos. Heats and holds vacuum as new Stainless steel shelves, clips and replacement heating elements included Added LED lighting in door. Transformer attached shown in photos.
Hot Air Oven 14X14X14 S.S. Chamber With Digital Temperature Controller - HOT AIR OVEN - MAKE Temp Range:-Room To 200 Deg.Inner Chamber S.S. And Outer Body Ms Powder Coated Heavy Gauge. (SIZE AND CAP AVAILABLE -350X350X350 Mm 14x14x14" 45Ltr Cap/300x300x300 Mm 1212x12" 28Ltr Cap).
Advanced Cell Diagnostics Acd Hybez Ii Oven 240200Acd Hybridization Oven - This lot is for oneAdvanced Cell Diagnostics ACD HybEZ II Oven 240200ACD Hybridization Oven. This unit will arrive in the condition shown. A signed credit card authorization form is required for all orders paid with credit card.
Ney Miniglaze Porcelain Glazing Oven Used Dental Lab Equipment, Dental Office - Used porcelain oven for glazing crows including zirconium right in dental office without having to send back to lab. Nice shape as you can see from pics. Fully tested by our in house tech. Only thing is door is a little funky, still works good but not original oven door. If new sells for $1495.00
30ml Alu 99% Conical corundum crucible melting furnace crucible metal casting s - 1 x Corundum Crucible. Capacity: 30ml. Casting formation, high density. Material: Aluminium oxide. Good temperature resistant, good chemical resistance. High purity, Al2O3 more than 99%. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing.
Despatch Industries, INC Microwave Module Model M1A. Used Surplus - This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the sale. This item is to be used for its intended purpose.
Digital Muffle furnace Lab Furnaces Heating equipment AjantaExports - Green Natural Artificial Eyes Set of 20 Pieces Human Prosthetics AjantaExports. Indirect ophthalmoscope Binocular Eye examination AjantaExports. Hydraulic Stool Chair with Back and Arm rest hospital furniture AjantaExports.
Bio-Rad Microcentrifuge Model 16K - This Bio-Rad Microcentrifuge Model 16K is a powerful tool for any laboratory. Whether you are looking to upgrade your lab furnaces and ovens or simply need a new microcentrifuge, look no further than this Bio-Rad model.
Precision Scientific Thelco 160DM Laboratory Oven Cat: 51220161, 5.5 Cu Ft, 250 - Precision Scientific Thelco Laboratory Oven Catalog No. 51220161 Model 160DM. Catalog #: 51220161. Model: 160DM. Manufacturer: Thelco. Type: Laboratory Oven. Temperature Range: 40 ° to 250 °C. We want you to feel comfortable buying from us.
Cascade CVO-10 Vacuum Oven on Stand 160°C, 9 Cu. Ft. , 230V - Cascade CVO-10 Vacuum Oven on Stand 160°C, 9 Cu. Ft., 230V. The unit has also been tested in our facility and found to be in good working condition. If the item is listed as working, then it was tested to the best of our ability.
Bectochem 48 Tray Drying Oven - Bectochem 48 tray drying oven. Oven is in good shape. It is constructed from 316 SS. Has a 48 tray drying capacity.
Cana VC-336L Vacuum Drying Oven - Cana VC-336L vacuum drying oven. The top panel of the oven is dented from transportation/ storage this has no mechanical effect. Everything else is complete. Buyer pays for freight shipping.
Cana VC-336L Vacuum Drying Oven - Cana VC-336L vacuum drying oven. Missing the door seal to be able to pull a vacuum on the oven. Everything else is complete. Buyer pays for freight shipping.
Digital muffle furnace made of kanthal wire useful for ashing 225x100x100mm - (A) 225x100x100mm (9”X4”X4”). Maximum Temp. 900 Degree C With Working Temp. Muffle Furnace Outer Body Is Made Of Thick Mild Steel Sheet. Special High Temperature Alloy Wounded On The Outer Surface Of Working Chamber To Work On 220/110volt.
Whip Mix/Intra-Tech Pro 100 Dental Furnace Pro100 - With a muffle furnace type and a unit quantity of 1, this unit was manufactured in Germany and is suitable for a variety of dental laboratory disciplines.
NEY Centurion Qex Dental Porcelain Furnace - Tested by a licensed technicianFully functionalThis dental porcelain furnace is a reliable tool for your laboratory needs. The NEY Centurion Qex model is designed for optimal performance and precision, making it a great addition to your equipment. Its brand and model name ensure quality and durability, and it is specifically intended for use in dental laboratories. This furnace/oven type is ideal for firing porcelain and other dental materials, and it is sure to exceed your expectations in terms of efficiency and effectiveness.
R188708 QL Quincy Lab 30GCE Bench Top Oven - It powered on and I could feel it heating up. It reached original setpoint very quickly, then I set it for as high as it would reach. It quickly reached that temperature also. Clean inside and out.
C188662 Thermo Thermolyne FB1415M Benchtop Box Furnace (120V, 1450W, to 1100°C) - However, this is the extent of my testing of this furnace, and it is being sold as-is. I tested it set to 500°C, 800 °C, and 1100 °C, and the chamber temp remained constant at each set point. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
INRESA Schultheiss GmbH INDUCTION Casting FURNACE - Manufacturer : INRESA. Type : Furnace. We are good people and willing to help. Our assets have certified seals on them. NOT HAPPY: Call us! Give us an opportunity to help. YELLOW TESTED > CONNECTED TO POWER OR ATTEMPT TO START: When possible we attempt to PLUG IN or POWER UP the asset in liquidation.
Lab Muffle Furnace for Heat Treatment, Melting Oven 1400℃ 1700℃ 110V 220V - Technical Specifications of 1200deg.c laboratory sintering muffle furnace. The furnace shell adopts a double-layer air-cooled structure to ensure that the surface temperature of the furnace shell is close to room temperature.
VWR Lab Incubator/Oven, Forced Air, 75c Max temp, 178L(6.3cf), No CO2 - Type: VWR Incubator F Air 6.3CF. Because the incubator is forced air and not water jacketed it reaches 37c from 25c in 45 minutes. No waiting 24 hours like with a water jacketed incubator. Incubator can be placed on the floor or on a bench.
Quincy Lab 10GC Gravity Convection (Amb-213C) Analog Benchtop Lab Oven .7 cu/ft - Godlevsky Enterprises, LLC ~ Cliff Godlevsky ~ Call /Text or whatsapp: 5207090315 This Quincy Lab 10GC Gravity Convection Oven is in excellent cosmetic and tested working condition. Nice space saving benchtop model, that will fit on most workspace counters. When plugged in and set on high, the unit heats quickly & quietly. The temperature dial goes from 1-10, and will set this oven for F or C. (Ambient-213C). See Pics. Metal interior with 1 fixed and 2 adjustable shelves. The interior chamber is 12"w x 10"d x 10" tall (0.7cu/ft). Very nice gravity convection oven, guaranteed not to be DOA.
Whip Mix Pro 200 Dental Lab Furnace KK340 - In working condition, it also looks very clean. Pictures show everything that is included. Made in USA. NO EXCEPTIONS WILL BE MADE UNLESS PREVIOUSLY APPROVED IN WRITING . Doing that is against U. S. and international laws.
110V 17.3*21.6in Lab Digital Forced Air Convection Drying Oven Electric Heat 2KW - 101-2AB Digital Forced Air Convection Drying Oven. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
110V 220V Lab Muffle Furnace for Heat Treatment, Melting Oven 1 1400℃ 1700℃ - Technical Specifications of 1200deg.c laboratory sintering muffle furnace. The furnace shell adopts a double-layer air-cooled structure to ensure that the surface temperature of the furnace shell is close to room temperature.
CEM MDS MDS-2100 Benchtop Laboratory Microwave Digestion Oven - CEM MDS MDS-2100 Benchtop Laboratory Microwave Digestion Oven. SOLD AS IS. Some heating elements not functional however passed power test. NO REFUNDS ACCEPTED. local pickup preferred but we are happy for you to call to arrange shipping.
THERMO SCIENTIFIC F30420C Tabletop Muffle Furnace, THERMOLYNE F30420C Furnace - Furnace is super clean and fully functional. Triple your usable working area with two supplied accessory refractory shelves using Thermo Scientific™ Thermolyne™ Largest Tabletop Muffle Furnace. Chamber Stability at 1000°C±1.2°C.
Labnet Problot 12 Hybridization Oven H1200 Part No. 9050579 Tested Working Video - Labnet Problot 12 Hybridization Oven L12 Part No. 9050579. Labnet Problot 12 Hybridization Oven H1200 Part No. 9050579 (Only). Item has been tested and found fully functional. Video included below ↓. It displays signs of wear, such as minor to moderate scratches or scuffs.
Powder Coating Oven - Grieve Oven - Parts Curing - Manufacturer - Grieve. work area for good uniform heating. A powered exhaust fan is located on top of the oven. are also located above the work area. Heated air is circulated in a full horizontal pattern acros work area for good uniform heating.
R188649 Being Forced Air Drying Oven B0F-120 Amb+10ºC~300ºC - It powered on with no problems and was warming up. It appears to have heated to set-point of 290ºc. During testing the power was interrupted and the internal reset button was tripped and had to be reset.
Jelenko Commodore II VPF Dental Dentistry Porcelain Oven Furnace Unit - Manufacturer: Jelenko. Model: Commodore II. Plugged unit in and ran through cycle. Marks and Scrathes on unit. Any party that unsuccessfully challenges the enforceability of this Choice of Law and Forum Selection clause shall reimburse the prevailing party for its attorney fees and costs associated with defending against the challenge of said clause.
Medilabs DIGITAL MUFFLE FURNANCE MAXIMUM TEMPERATURE 1100 DEGREE 110/220V - Maximum Temp. 900 Degree C With Working Temp. • Out Side Body Made Up Of Heavy Gauge G.I. Duly Powder Coated Inner Muffle With High Temp. Insulating Material. Muffle Furnace Outer Body Is Made Of Thick Mild Steel Sheet.
Only 220V Digital Muffle Furnace High Quality 225x100x100mm With Free Shipping - (A) 225x100x100mm (9”X4”X4”). Maximum Temp. 900 Degree C With Working Temp. • Out Side Body Made Up Of Heavy Gauge G.I. Duly Powder Coated Inner Muffle With High Temp. Insulating Material. Muffle Furnace Outer Body Is Made Of Thick Mild Steel Sheet.
Benchmark Scientific Bsw1520 Block 24X1.5/2.0Ml Centrifuge Tubes - Digital Dry Bath Block, Material Aluminum, Width 24x1.5/2.0mL Centrifuge Tubes. BENCHMARK SCIENTIFIC. Digital Dry Bath Block. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes.
Lindberg/BlueM TF55030COMA-1 Mini-Mite Laboratory Tube Furnace 1100°C w/ RS-485 - Up to 30 units can be connected to one PC. Includes: 9 foot (3m) power cord. Required Accessories: Required process tubes not included. Lindberg/BlueM TF55030COMA-1 Mini-Mite Laboratory Tube Furnace 1100°C w/ RS-485 Digital Communications Port.
Shel Lab VWR 1410 Vacuum Oven - Sanitized with software. D/Repairable for parts only and/or scrap. F5 (High grade equip) and F4 (Low grade equip). Sanitized with software, if applicable.
Industrial Drying Oven Lab Digital Forced Air Convection Drying Oven 1.5 Cu Ft - Large Capacity: The oven has a spacious interior that can accommodate large quantities of samples or materials for drying. Durable Construction: The oven features sturdy stainless steel construction, ensuring long-lasting durability and resistance to corrosion.
2012 Sentry Heat Treating Oven Furnace 18 Inches Deep 440V 3Ph Programmable - This is a2012 Sentry Heat Treating Oven Furnace. Tested and Runs Perfectly! They are subject to withdrawal, change and prior sale without notice. All orders received are binding only when they have been accepted and acknowledged by us in writing.
SXC-1.5-10 Integrated Programmable High Temp Furnace for Ceramic Fiber Lab 220V - The cold plate of the outer shell is sprayed with plastic, with a lightweight appearance and a weight only one fifth of that of an ordinary high-temperature furnace. It can be used when powered on. It is an ideal high-temperature furnace for universities, scientific research institutions, industrial and mining enterprises, and laboratories.
1700℃ 8L Inert Gas Nitrogen Argon Atmosphere Furnace Hydrogen Atmosphere Furnace - 【Internal structure】Adopt international advanced lightweight alumina ceramic fiber, with 30-50 segment programmable PID self-tuning, automatic heating, automatic cooling, no need to be on duty. The optional RS-485 communication interface (connecting to a common computer to start, stop, suspend heating, curve storage, historical curve recording, etc.) 【Product performance】The atmosphere furnace body has good sealing performance, the vacuum degree can reach 600PA, the maximum temperature of the imported resistance wire can reach: 1700 ℃, the operation is simple, and the loading and unloading is convenient. 【Passable gas】The atmosphere furnace is a special furnace type designed for products requiring atmosphere protection. The inert gas, nitrogen gas, or vacuum can also be introduced into the.
Jeio Tech Lab Companion AAH82231K 230V 3.53 Cu Ft Cap Temp And Humidity Chamber - Item Temperature And Humidity Chamber. Capacity 3.53 Cu Ft. My driver will be 100% responsible for the item after it is signed for and released to him/her. We have inspected this item and we do not have the proper outlet on site to fully test it.
CEM MAS 7000 Microwave Furnace - Weight 97.5 lbs (44.2 kg). Temperature Capabilities N/A. Languages English. 8.25 x 4.55 x 3 in (20.96 x 11.56 x 7.62 cm). Minimum Watts 900. 18.17 x 25.75 x 19.6 in (46.15 x 65.4 x 49.78 cm).
1350℃ Vacuum Brazing Furnace Ag/Cr/Ni Base Brazing Furnace with Vacuum Pump Unit - 【Internal structure】Adopt international advanced lightweight alumina ceramic fiber, with 30-50 segment programmable PID self-tuning, automatic heating, automatic cooling, no need to be on duty. The optional RS-485 communication interface (connecting to a common computer to start, stop, suspend heating, curve storage, historical curve recording, etc.) 【Product performance】The atmosphere furnace body has good sealing performance, the vacuum degree can reach 600PA, the maximum temperature of the imported resistance wire can reach: 1700 ℃, the operation is simple, and the loading and unloading is convenient. 【Passable gas】The atmosphere furnace is a special furnace type designed for products requiring atmosphere protection. The inert gas, nitrogen gas, or vacuum can also be introduced into the.
Advanced Cell Diagnostics ACD HybEZ Hybridization Oven Boekel 241000ACD - Advanced Cell Diagnostics ACD HybEZ Hybridization Oven Boekel 241000ACD. This unit was recently purchased along with a lot of other lab equipment from a company that was downsizing. It is in good, functional condition and comes as pictured. The item shown is the one for sale in this listing. Oven and cord are both included. The latch on it is a bit loose from use, but this should not affect utility. Shipped from the USA within five business days of purchase.
Grieve VK-220 Scientific Vacuum Oven Altitude Chamber Tested Working - This Grieve VK-220 Scientific Vacuum Oven Altitude Chamber is used working surplus. It was tested in our facility and is fully functional. The physical condition is good, but there are signs of previous use and handling.
Shenpaz Sintra Plus - Shenpaz Sintra Plus. Condition is Used. Shipped with USPS Ground Advantage.
Thermo Scientific Thermolyne Lab Furnace As-Is - THERE IS WEAR INCLUDING SCRATCHES/SCUFFS/MARKS/RESIDUE ASSOCIATED WITH NORMAL USE. UNIT IS BEING SOLD AS IS. ITEM IS USED AND IS BEING SOLD AS-IS/FOR REPAIR ONLY.
VWR SCIENTIFIC 1685 Oven, 9070918 - Pre-owned - You are purchasing a VWR SCIENTIFIC 1685 Oven. This item is in used and untested condition. Please review the calibration stickers. This is a FREIGHT item and will require a call tag. CN 07/19/23
Blue M Oven MP-336C-1 - You are purchasing a Blue M Oven MP-336C-1. This unit is in used and UNTESTED condition. Last calibration was performed in 2014. There is cosmetic damage to the interior wall of the door as shown. Please review all of the available images carefully before making your purchase. This is a FREIGHT item. CN 6345 07/18/23
KDF Neo Super Cascom Casting Machine 2014 - (1x) KDF Neo Super Cascom Casting Machine. (3x) Denken-Highdental 323027A Carbon Crucible. This item was in good used condition when received and inspected at our facility.
Digital Muffle Furnace - Digital Muffle Furnace BEST DEAL. Maximum Temp. 900 Degree C With Working Temp. • Out Side Body Made Up Of Heavy Gauge G.I. Duly Powder Coated Inner Muffle With High Temp. Insulating Material. Muffle Furnace Outer Body Is Made Of Thick Mild Steel Sheet.
Vita Zyrcomat Zirconia Sintering Oven - Vita Zyrcomat Zirconia Sintering Oven. R2/Ready for ResaleSpecialty items are sold without testing Item has some dings/scratches from age/wearProduct is not guaranteed to function Buyer may return item at no charge within standard eBay return time frame
Carbolite PF60 Fan Convection Laboratory Oven - Fan convection for rapid heating & recovery & excellent uniformity. Compliant with safety standard BS EN 61010-2-010:2003. Holding power (W) 480. Max power (W) 1000. Air changes / hr 21 / 153 . Shelf loading each / total (kg) 10 / 30.
1200℃ Electric Furnace High Temperature Integrated Muffle Furnace 120*200*80mm - Characteristics: 1.Mirror stainless steel mouth, long-term use will not change color. 2.Imported double insulated ceramic liner, stable performance. 3.Vacuum forming polycrystalline mullite fiber furnace, high efficiency insulation. 4.In the double shell, the air sleeve is insulated, and the double guiding air passage. 5.High-precision micro-computer controller and precision sensor are perfectly integrated, and the temperature is accurate. Feature: 1.Import time control system and high precise sensor with sensitive response , high precision and good stability. 2.Adding exhaust devices is beneficial to ashing. 3.Split design, circuit detachable, easy to maintenance and repair. 4.P model is program temperature control type. program temperature controller can programme multistage program, 5.
Instron 3111 Enviromental Test Chamber (#4057) - Powers up! Sold as is for parts or repair! We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Vwr Scientific Products Model 1415M Lab Vacuum Oven (#4050) - Powers up! We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Precision Thelco #51221147 65-250C Lab Oven (#4046) - For us to check rates, we need the following info: 1. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Athena AD-800 Oven, 110v, 200w, 3 Temps 122*, 158*, 194* - Used. With signs of wear. Please make sure to look at all the pictures before placing your bid. All sales are final and no returns or refunds are accepted. Please pay within 24hrs of winning. Thank you.
VWR 1365DP-2 5-CU.FT. Convection/Depyrogenation Oven; 40-260°C, 220V 1PH - VWR 1365DP-2 5-CU. FT. Convection/Depyrogenation Oven; 40-260°C, 220V 1PH. Manufacturer: Sheldon (for VWR). Stainless interior with adjustable shelf. Temperature adjustable from 40°C to 260°C. Operates on 220V 9A 1-Phase Electric with attached power cord.
Used VWR 1350G Gravity Oven - This VWR 1350G gravity convection oven is used, and in very good condition. It's very clean and works great. It was removed from a lab that closed down. It depends on your distance from us (Denver, Colorado).
Laboratory 3L Muffle Furnace Tmax 1700℃ Metal/Ceramic/Titanium Thermal Treatment - The low-temperature box furnace adopts polycrystalline mullite fiber lining, with a total thickness of 120-205mm, which has excellent thermal insulation and energy saving effect. The shell adopts double-layer air-cooled structure, the surface temperature of the shell is below 60 degrees, and the furnace top is a reinforced composite structure, which does not collapse in long-term use and ensures the service life of the electric furnace. This series of electric furnace is specially developed for sintering, melting and analysis of metal, non-metal and other compound materials in laboratories of universities, research institutes and industrial and mining enterprises. Excellent temperature uniformity. Quality heating elements ensure the longest heating element life, best heat radiation proper.
Laboratory 1L Muffle Furnace Tmax 1700℃ Metal/Ceramic/Titanium Thermal Treatment - The low-temperature box furnace adopts polycrystalline mullite fiber lining, with a total thickness of 120-205mm, which has excellent thermal insulation and energy saving effect. The shell adopts double-layer air-cooled structure, the surface temperature of the shell is below 60 degrees, and the furnace top is a reinforced composite structure, which does not collapse in long-term use and ensures the service life of the electric furnace. This series of electric furnace is specially developed for sintering, melting and analysis of metal, non-metal and other compound materials in laboratories of universities, research institutes and industrial and mining enterprises. Excellent temperature uniformity. Quality heating elements ensure the longest heating element life, best heat radiation proper.
Laboratory 8L Muffle Furnace Tmax 1400℃ Metal/Ceramic/Titanium Thermal Treatment - The High-temperature box furnace adopts polycrystalline mullite fiber lining, with a total thickness of 120-205mm, which has excellent thermal insulation and energy saving effect. The shell adopts double-layer air-cooled structure, the surface temperature of the shell is below 60 degrees, and the furnace top is a reinforced composite structure, which does not collapse in long-term use and ensures the service life of the electric furnace. This series of electric furnace is specially developed for sintering, melting and analysis of metal, non-metal and other compound materials in laboratories of universities, research institutes and industrial and mining enterprises. Excellent temperature uniformity. Quality heating elements ensure the longest heating element life, best heat radiation prope.
Laboratory 3L Muffle Furnace Tmax 1400℃ Metal/Ceramic/Titanium Thermal Treatment - The High-temperature box furnace adopts polycrystalline mullite fiber lining, with a total thickness of 120-205mm, which has excellent thermal insulation and energy saving effect. The shell adopts double-layer air-cooled structure, the surface temperature of the shell is below 60 degrees, and the furnace top is a reinforced composite structure, which does not collapse in long-term use and ensures the service life of the electric furnace. This series of electric furnace is specially developed for sintering, melting and analysis of metal, non-metal and other compound materials in laboratories of universities, research institutes and industrial and mining enterprises. Excellent temperature uniformity. Quality heating elements ensure the longest heating element life, best heat radiation prope.
Laboratory 1L Muffle Furnace Tmax 1400℃ Metal/Ceramic/Titanium Thermal Treatment - The High-temperature box furnace adopts polycrystalline mullite fiber lining, with a total thickness of 120-205mm, which has excellent thermal insulation and energy saving effect. The shell adopts double-layer air-cooled structure, the surface temperature of the shell is below 60 degrees, and the furnace top is a reinforced composite structure, which does not collapse in long-term use and ensures the service life of the electric furnace. This series of electric furnace is specially developed for sintering, melting and analysis of metal, non-metal and other compound materials in laboratories of universities, research institutes and industrial and mining enterprises. Excellent temperature uniformity. Quality heating elements ensure the longest heating element life, best heat radiation prope.
Lab Tmax 1400℃ Muffle Furnace Material Treatment Sintering Ovens 200*200*200mm - The High-temperature box furnace adopts polycrystalline mullite fiber lining, with a total thickness of 120-205mm, which has excellent thermal insulation and energy saving effect. The shell adopts double-layer air-cooled structure, the surface temperature of the shell is below 60 degrees, and the furnace top is a reinforced composite structure, which does not collapse in long-term use and ensures the service life of the electric furnace. This series of electric furnace is specially developed for sintering, melting and analysis of metal, non-metal and other compound materials in laboratories of universities, research institutes and industrial and mining enterprises. Excellent temperature uniformity. Quality heating elements ensure the longest heating element life, best heat radiation prope.
90L Vacuum Drying Oven - Lanphan DZF-6090 - Make/Model: Lanphan DZF-6090. 90L Vacuum Drying Oven. Previously used for organic hemp CBD oil. Includes oven unit with heating system. - Vacuum Degree: 0.098Mpa. - Temperature Range: +10-250 degrees C.
Precision Model 10 Laboratory Lab Bench Table Top Vacuum Oven Metal Heat Works - General Used Condition as Pictured. This originally had two bars as opposed to just the one on the right side. So it is missing that other bar. I didn't have a pump to pull a vacuum so I don't know if the vacuum works without that but I would guess that it does.
C188374 Despatch LCC1-B7-2 Lab Oven (230VAC, 1Ph, 41.9A, 50/60Hz; to 260C/500F) - This is the extent of my testing of this oven, and it is being sold as-is. I tested it set at 100°C (stabilized at ~94 °C), 150°C (stabilized at ~143 °C), 200°C (stabilized at ~191 °C), and 260°C (stabilized at ~244 °C), and since it was not up to the max temp when set to 260 °, I also set it at 275°C (stabilized at ~263 °C), and since it was still heating, I also set it to 300°C (stabilized at ~283 °C).
C188376 Sikama Int'l UP2000 Ultra Profile 2000 Reflow Oven Furnace w/ Chiller - It powers up, as shown, and the various digital displays flash numbers, which start to increase, but after a few minutes, the alarm starts going off, and "H2O" starts flashing on one of the displays, possibly because I did not have the chiller hooked up to it (?).
Lab Tmax 1400℃ Muffle Furnace Material Treatment Sintering Ovens 150*150*150mm - The High-temperature box furnace adopts polycrystalline mullite fiber lining, with a total thickness of 120-205mm, which has excellent thermal insulation and energy saving effect. The shell adopts double-layer air-cooled structure, the surface temperature of the shell is below 60 degrees, and the furnace top is a reinforced composite structure, which does not collapse in long-term use and ensures the service life of the electric furnace. This series of electric furnace is specially developed for sintering, melting and analysis of metal, non-metal and other compound materials in laboratories of universities, research institutes and industrial and mining enterprises. Excellent temperature uniformity. Quality heating elements ensure the longest heating element life, best heat radiation prope.
Thermo Scientific 11175739 20x1.5 AC.14 For Centrifuge CR3I, C3I 14500 NEW - Compatible CR3I, C3I. Max Load 0.080 kg / max rpm 14500. Thermo Scientific Samco. Thermo Electron Corporation. (A new, unused item with minor signs of wear. Furthermore, any noticeable issue will describe with the item specification above before this portion. ).
1200℃ 12L Electric Furnace High Temperature Box Muffle Furnace 200mm*200mm*300mm - The low-temperature box furnace adopts polycrystalline mullite fiber lining, with a total thickness of 120-205mm, which has excellent thermal insulation and energy saving effect. The shell adopts double-layer air-cooled structure, the surface temperature of the shell is below 60 degrees, and the furnace top is a reinforced composite structure, which does not collapse in long-term use and ensures the service life of the electric furnace. This series of electric furnace is specially developed for sintering, melting and analysis of metal, non-metal and other compound materials in laboratories of universities, research institutes and industrial and mining enterprises. Excellent temperature uniformity. Quality heating elements ensure the longest heating element life, best heat radiation proper.
Laboratory 8L Muffle Furnace Tmax 1200℃ Metal/Ceramic/Titanium Thermal Treatment - The low-temperature box furnace adopts polycrystalline mullite fiber lining, with a total thickness of 120-205mm, which has excellent thermal insulation and energy saving effect. The shell adopts double-layer air-cooled structure, the surface temperature of the shell is below 60 degrees, and the furnace top is a reinforced composite structure, which does not collapse in long-term use and ensures the service life of the electric furnace. This series of electric furnace is specially developed for sintering, melting and analysis of metal, non-metal and other compound materials in laboratories of universities, research institutes and industrial and mining enterprises. Excellent temperature uniformity. Quality heating elements ensure the longest heating element life, best heat radiation proper.
DZF-6020A Laboratory vacuum drying oven 0.3kw sprayed inner liner 300×300×275mm - It is used for powder drying, baking, disinfection and sterilization, and can pour inert gas into the interior. Compared with the ordinary drying relying on air circulation, the powder sample will not be blown or moved by the flowing air.
Laboratory 3L Muffle Furnace Tmax 1200℃ Metal/Ceramic/Titanium Thermal Treatment - The low-temperature box furnace adopts polycrystalline mullite fiber lining, with a total thickness of 120-205mm, which has excellent thermal insulation and energy saving effect. The shell adopts double-layer air-cooled structure, the surface temperature of the shell is below 60 degrees, and the furnace top is a reinforced composite structure, which does not collapse in long-term use and ensures the service life of the electric furnace. This series of electric furnace is specially developed for sintering, melting and analysis of metal, non-metal and other compound materials in laboratories of universities, research institutes and industrial and mining enterprises. Excellent temperature uniformity. Quality heating elements ensure the longest heating element life, best heat radiation proper.
Laboratory 1L Muffle Furnace Tmax 1200℃ Metal/Ceramic/Titanium Thermal Treatment - The low-temperature box furnace adopts polycrystalline mullite fiber lining, with a total thickness of 120-205mm, which has excellent thermal insulation and energy saving effect. The shell adopts double-layer air-cooled structure, the surface temperature of the shell is below 60 degrees, and the furnace top is a reinforced composite structure, which does not collapse in long-term use and ensures the service life of the electric furnace. This series of electric furnace is specially developed for sintering, melting and analysis of metal, non-metal and other compound materials in laboratories of universities, research institutes and industrial and mining enterprises. Excellent temperature uniformity. Quality heating elements ensure the longest heating element life, best heat radiation proper.
Binder 9090-0019 Heating Drying Oven Forced Convection 2022 FOR PARTS READ - Binder 9090-0019 Heating Drying Oven Forced Convection 2022 FOR PARTS READ. 2022 oven / never used / cane defective from factory I beleive. Was purchased from a electronic recycler. Control unit is defective. For parts / repair
Hotpack 434304 Humidity Chamber Incubator Test Oven Lab Furnaces - Part Number 434304. Model 434304. LET'S STAY IN TOUCH. We are dedicated to understanding the unique challenges and opportunities that each industry faces. Warehouse Storage Location : ND-09-04. Our mission is to empower industries with the tools and solutions they need to thrive in a dynamic and ever-evolving marketplace.
Forma Scientific 3236DU Forma-Vac Vacuum Oven 115V 10A 0.8 Cu-Ft - Part Number 3236DU. Model 3236DU. Forma Scientific 3236DU Forma-Vac Vacuum Oven 115V 10A 0.8 Cu-Ft Forma Scientific. We are dedicated to understanding the unique challenges and opportunities that each industry faces.
Despatch LAC1-67-8 High Performance Laboratory Oven, 6.7 Cubic Feet 40c to 260c - For Your Consideration One Despatch LAC1-67-8 High Performance Lab Oven. Oven is super nice and ready for work. Sale includes the oven with two racks. The Despatch LAC high-performance bench-top oven uses horizontal recirculating airflow to ensure uniform temperatures throughout the oven.
Gravity Convection Oven - Unused - This Lab Oven has a wide temperature range of between 50° and 250 °C, heating up to 150 in just 24 minutes and recovering in 8 minutes after openings. This drying oven also features over-temperature protection, dual-sensor safety sensors, and an RS-232 connection for data monitoring through a PC.
Labconco FreeZone 4.5 Liter Benchtop Freeze Dry System 7750020 - This item is fully tested and in excellent working order. Item will come with a 30 Day Warranty. Cosmetically in good condition showing minor scuffs / scratches / blemishes from previous use. The front panel has a large scuff across the refrigeration buttons. Includes Benchtop Freeze as pictured. No additional items or accessories are included. Unless pictured, no power adapter / power cable included. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have..
Shel-Lab SVAC2E Economy Vacuum Oven - Model: SVAC2E. C9 = New, Open Box. C8 = Unused. ⦁ No missing parts. ⦁ Fully cleanes with all non-original labels removed. F4 = Hardware Functional (Appendix C – Test and Repair). ⦁ May have light scratches or other minor blemishes from normal wear.
AjantaExports Vacuum Oven Digital Lab Furnaces & Ovens - AjantaExports Dental Care Model Small Dental anatomy Oral health Teeth model. AjantaExports Gynecological Examination Models. AjantaExports Distillation apparatus All glass Electrically heated. AjantaExports Giant Eye Model Anatomy Ocular structure Education Teaching.
QUINCY LAB 30GC OVEN Analog Oven, 2.0 cu. ft. - QUINCY LAB 30GC OVEN. Analog Oven, 2.0 cu. Analog Oven, Convection Type Gravity, Temp. Range (C) Ambient 25 Degrees to 232 Degrees, Temp. Range (F) Ambient +25 Degrees to 450 Degrees, Overall Height 25.5 in, Overall Width 20 in, Overall Depth 14.25 in, Temp.
USA Lab 0.9 CuFt Vacuum Drying Oven w/ 4 Shelves (8 Slots) 200°C 110V 4 Sided... - Our USA Lab vacuum ovens are a top of the line product compared to others that are currently on the market while maintaining an affordable price. We also provide an all stainless-steel tubing interior, oil filled vacuum gauge, stainless steel vacuum vent & valve, and a 1-year warranty.
(4-Pk) Quincy Lab Rubber Feet 201-1209 - Item Details(4-Pk) Quincy Lab Rubber Feet 201-1209. Explore Endless Deals! We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty. Specialty Services.
Quincy Lab 101-2223 Hydraulic Thermostat for Bench Oven Z828470048 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty. Specialty Services. Pottery & Glass. Movies & TV. Everything Else. Coins & Paper Money.
AjantaExports Digital Jar Testing Apparatus 2 Spindle - AjantaExports Ampoule Clarity Test Apparatus Ampoule clarity tester. AjantaExports Cream Separator 100lph Hand Operated. AjantaExports Disintegrator Double Basket Apparatus. AjantaExports Glass Prism Diy Reflection Prisms Equilateral Prism 50 X 50 Mm.
PRECISION FREAS HIGH PERFORMANCE MECHANICAL CONVECTION OVEN 645 51221140 15C to - All pictures shown above are of actual product(s) sold. Item(s) are sold-as-is as shown in pictures above. Unit powers on, WORKS. it was used previously at a local university. Sold as shown in pictures below, only includes what is shown in pictures below.
Applied Test Systems Split Tube Furnace - Never used ATS split tube furnace. 1530watts, 120 volt, max temp 1850F Ask questions no returns. It has never been turned on. I have no way to test it. I have taken 5 screws out so its in 2 pieces now. Very easy to do. It will ship in 2 separate boxes.
Shimadzu CTO-20AC Prominence Column Oven - This Shimadzu Prominence Column Sampler is invery good condition. Includes everything in the pictures and nothing else. "The sale of this item may be subject to strict regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Sirona Cerec Speedfire Dental Furnace Restoration Heating Lab Oven Machine - Item Includes: Power Tablet Speedfire. Model: Speedfire. Manufacturer: Sirona. Hooked this unit up correctly and ran one of the cycle on this tablet. This unit is fully functional. Any party that unsuccessfully challenges the enforceability of this Choice of Law and Forum Selection clause shall reimburse the prevailing party for its attorney fees and costs associated with defending against the challenge of said clause.
Hybaid Hybridization Oven Incubator Labnet Mini MK II Rotisserie - It powers on, heats up (tested to 50C), and rotisserie spins as it should. Barnstead International Lab-Line Model 3511 LC Laboratory Oven. Entech 3108 Canister Cleaning System Oven. of quality and service.
Digital muffle furnace made of kanthal wire useful for ashing 225x100x100mm - (A) 225x100x100mm (9”X4”X4”). Maximum Temp. 900 Degree C With Working Temp. Muffle Furnace Outer Body Is Made Of Thick Mild Steel Sheet. Special High Temperature Alloy Wounded On The Outer Surface Of Working Chamber To Work On 220/110volt.
Quincy Lab Model 21-350 Oven - This Quincy Lab convection oven, model 21-350, is an essential piece of equipment for any laboratory. With a spacious interior and reliable temperature control, it is ideal for a variety of applications. The oven is manufactured by Quincy Lab, a renowned brand in the industry, and comes with a unique model Designed for professional use, this oven is perfect for heat-treating, baking, and drying applications. It is classified under the categories of Business & Industrial, Healthcare, Lab & Dental, and Medical & Lab Equipment, Devices. Whether you are a researcher, scientist, or medical professional, this oven will meet your requirements and take care of your needs.I can put it on a pallet if buyer arranges shipping
Coltene D.I.-500 DI-500 Dental Furnace Oven Curing Oven - Coltene D.I.-500 DI-500 Dental Furnace Oven Curing OvenGot this at a estate, clean out and have no use for it or have ever used it. Selling it as is and will be shipped out fast and safe in 24 hours or less
Thermo 6074.0200 UltiMate 3000 VWD Detector Analytical Flow Cell, Dionex #15251 - Item #15251. for UltiMate 3000 Variable Wavelength Detector. Type Analytical Flow Cell. Not tested for any analytical application (liquid) at our facility. Product Line UltiMate. Our testing very often is limited to power up test or basic functions available on the external keypad of the device (if available).
Dionex Uci-50 Universal Chromatography Interface, P/N 5911.0005, #15250 - DIONEX UCI-50: 2 CHANNELS UNIVERSAL CHROMATOGRAPHY INTERFACE, P/N 5911.0005. Location: North 1. Not tested for any analytical application (liquid) at our facility. Our testing very often is limited to power up test or basic functions available on the external keypad of the device (if available).
Blue M Constant Temperature Cabinet Lab Oven 0V-475A-2 (6/23) - Item: Blue M Constant Temperature Cabinet Lab Oven. Temperature Range: 38°C to 260°C (500°F). Location: R0. This item is USED. Asset #140194. Local pickup is available in San Diego.
15L Lab Drying Box Digital Electric Constant Temperature Blast Drying Oven - LC-101-00BS 15L Digital Electric Constant Temperature Blast Drying Oven Lab Drying Box 300℃ 110V/220V. - This electric thermostatic drying oven with constant temperature and a digital display. Electric Thermostatic Drying Oven.
Thermolyne 10500 Industrial Benchtop Furnace FA10525P-1 With Themocouple - This item is fully tested and in excellent working order. Item will come with a 30 Day Warranty. Cosmetically in good condition showing minor scuffs / scratches / blemishes from previous use. Includes Benchtop Furnace and thermocouple as pictured. No additional items or accessories are included. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have..
Blue M Oven Model CR07-206B/C (6/23) - Item: Blue M Oven. A low temperature filter is installed into this unit, giving this oven a max temperature of 250°C / 482°F. Chamber Size: 20" x 18" x 17". Model Number: CR07-206B/C Serial Number: P40-659.
Appligene Mini Hybridisation Hybridization Oven Four A Hybridation HYBRID2 324 - Appligene Mini Hybridization Hybridization Oven FOUR A HYBRIDATION HYBRID2 324 We offer repairs for various assemblies and manufacturers of the industrial electronics PLC assemblies - servo motors - converters - inverters - controls - robotics - control panels - rectifiers - circuit boards - servo amplifiers - etc... maybe you can save postage. Apply for a combined payment. Enjoy shopping in our store. WIf you don't want to bid on any of our other items, please use the E-Bay message to automatically bid stored account data to request. In order to receive feedback on the receipt of the goods and customer satisfaction, we ask for a rating on EBAY. Should it disagreements give please Clarify by email before an evaluation. We're here to help. Ask us. The free setting tool. List your items qu.
Lunaire Limited Chamber CE205 (6/23) - Model Number: CE205. Item: Lunaire Limited Chamber. Local pickup is available in San Diego. Temperature Range: 225°C (437°F).
Thermo Precision Oven with Warranty SEE VIDEO - This drying oven has a capacity of 2.5 cu ft and takes up a footprint of less than 2 sq ft. The exterior of the Precision Scientific oven is epoxy-coated stainless to resist corrosion, with an easy-to-clean aluminum interior with removable shelves.
Qfix RapidHeat Hot Air Oven RT-2075-110 for Aquaplast RT Fibreplast & Bolus - Qfix RapidHeat Hot Air Oven RT-2075-110. After its initial disinfection and inspection, our technicians tested the Qfix RapidHeat Hot Air Oven with the following results - Two (2) oven racks. - Interior oven lights: PASSED.
Lab 1L 1400℃ High Temperature Benchtop Muffle Furnace Material Sintering Ovens - The High-temperature box furnace adopts polycrystalline mullite fiber lining, with a total thickness of 120-205mm, which has excellent thermal insulation and energy saving effect. The shell adopts double-layer air-cooled structure, the surface temperature of the shell is below 60 degrees, and the furnace top is a reinforced composite structure, which does not collapse in long-term use and ensures the service life of the electric furnace. This series of electric furnace is specially developed for sintering, melting and analysis of metal, non-metal and other compound materials in laboratories of universities, research institutes and industrial and mining enterprises. Excellent temperature uniformity. Quality heating elements ensure the longest heating element life, best heat radiation prope.
Lab 3L Muffle Furnace Oven Heat Treatment Sintering Analysis 1700℃ 150*150*150mm - The low-temperature box furnace adopts polycrystalline mullite fiber lining, with a total thickness of 120-205mm, which has excellent thermal insulation and energy saving effect. The shell adopts double-layer air-cooled structure, the surface temperature of the shell is below 60 degrees, and the furnace top is a reinforced composite structure, which does not collapse in long-term use and ensures the service life of the electric furnace. This series of electric furnace is specially developed for sintering, melting and analysis of metal, non-metal and other compound materials in laboratories of universities, research institutes and industrial and mining enterprises. Excellent temperature uniformity. Quality heating elements ensure the longest heating element life, best heat radiation proper.
Fisher Model 126 Cat # 10-750-126 Lab Furnace (#4029) - Powers up. For us to check rates, we need the following info: 1. We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided.
Thermolyne Type 1500 Benchtop Laboratory Furnace Ceramic Oven Model FD1525M - Thermolyne Type 1500 Benchtop Laboratory Furnace Ceramic Oven Model FD1525M. Does power on, but I believe there is an issue with the safety switch or something else. You have to make sure the switch is fully engaged, and then once you select percent time on it comes on, but seems to cycle back off. Sold as is, not sure if the heating elements work, but may be a wiring/safety switch issue.
Neytech Dentsply Vulcan 3-1750 Benchtop Lab Dental Furnace Muffle #9493409 - Part #: 9493409. The Vulcan 3-1750, like all Vulcan benchtop furnaces, have a maximum temperature of 1100 Celsius or 2012 Fahrenheit. The Vulcan 3-1750 features High Performance Hybrid Muffle Technology exclusive to Vulcan benchtop furnaces for faster heating and cooling than full firebrick furnaces.
Ney Centurion Q50 Dental Furnace Restoration Heating Lab oven AND Vacuum Pump - eBay doesn’t allow me to list two products at once, but for this price you are receiving the:Ney Centurion Q50 Dental Furnace Restoration Heating Lab Oven Machine 100 - 230VANDDensply Neytech Max vac Dental Porcelain Oven Vacuum PumpONE WILL NOT WORK WITHOUT THE OTHER. In extremely good condition. Can confirm that it does turn on and work. My father had a dental lab and this item is only gently used and in great condition. Smoke free home.Flat shipping rate because it is big and bulky, and I will have it professionally packaged and shipped to make sure you receive it in perfect condition.
Barnstead Lab-Line 3513ENT L-C Oven for Cannister System - This is a Barnstead Lab-Line 3513ENT L-C Oven. It was set-up with an entire cannister cleaning system. The manifold assembly are included in the inside of the Oven. Oven Heats up and holds temperature well.
Blue M 0V-472A-2 Stabil-Therm Benchtop Utility Oven 1000W 120VAC 11.6A 100-500°F - Blue M Stabil-Therm Benchtop Utility Oven. Heater Power: 1000W. Temperature Range: 100-500°F. Maple Grove, MN 55369. 9472 Hemlock Lane N. your account number during checkout. SKU# SB-174109. Full size truck access and forklift is acceptable.
Thermo Heratherm OGS180 Oven - Tested and performs to manufacture specifications. This unit was in a laboratory for 2 months before it was decommissioned, it has very little use on it. Doors can be opened at over 180°C. Large, easy to read vacuum fluorescent display.
ZEBRA Slurry Shabo 2000 (Emulsion 2C + 0.5SP) Wine P P-SB27-WR - Write to us. Nothing is more important than your concerns and frustrations; we will do our endeavor to solve your issues. It is important for us! 1 ~ 6 weeks. Standard --- Currently not available.
AjantaExports peltier temperature controller with sipper system - AjantaExports Nasal Cavity Model Nasal passage anatomy model Human. AjantaExports Infant Obstruction & CPR Simulator Infant CPR training model. AjantaExports Laboratory Jack Lab jack Adjustable lab stand Scissor jack.
Lab-Line L-C Oven 3511 (6/23) - Model Number: 3511. Item: Lab-Line L-C Oven. Location: X1. Serial Number: 0999-0704.
Ney Diaphragm Vac Pump (For A Porcelain Furnace Not Included) - NEY DIAPHRAGM OIL LESS VACUUM PUMP E.U.C. (FOR A PORCELAIN FURNACE NOT INCLUDED). NEY DAA-V176-EB Diaphragm Vacuum Pump 115VAC 3.5A 50/60Hz. NEY Diaphragm Vacuum Pump for Use with Firing Porcelain Furnaces.
Digital Forced Air Convection Laboratory Drying Oven 220V Items Heat Treatment - 1 220V 101-2AB Digital Forced Air Convection Drying Oven (160170). Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Jelenko Vacuum Pump For Porcelain Ovens. Used Dental Lab Equipment - Jelenko Vacuum Pump For Porcelain Ovens. Used Dental Lab Equipment. Fully tested by our in house tech, works as it should. Will work with most dental porcelain ovens. If new sells for over $695.00
Muffle Furnace Manuale Rectangular with Free Expedite Shipping - Inner Muffle With High Temp. Insulating Material. Muffle Furnace Outer Body Made Of Thick Mild Steel Sheet. Working Temperature 900°C. A Uniform Heat Distribution Through All 4 Side With Kental Wire.
Brooks Cryotiger Polycold System Compressor P/N 1102-01-000-14 ~ 31972 - Item: Brooks Cryotiger Polycold System Compressor P/N 1102-01-000-14. Manufacturer Brooks. To the best of our knowledge any one can buy this item. This item is not a prescription drug or a prescription device.
Dentsply Sirona Multimat NTX 2018 Dental Furnace Restoration Heating Lab Oven - Model: Multimat NTX. Manufacturer: Dentsply Sirona. Year: 2018. Item Includes: Furnace pump power hose. Furnace Type: Burnout. Hooked up unit to power and ran a dehumidification cycle, This unit worked flawlessly without issues.
Lab Digital Forced Air Convection Drying Ovenad Ajustable Speed Fan 110V/1000W - Item inclued:101-0AB Digital Forced Air Convection Drying Oven 1. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Thermo Scientific Lindberg Blue M Tube Furnace HTF55322A **1200 C Max** - Thermo Scientific Lindberg Blue M Tube Furnace HTF55322A **1200 C Max**. Thermo Scientific Lindberg/Blue M Tube Furnace HTF55322A - 1200 CelsiusModel Number: HTF55322A120V 23A 2.67 kW50/60 HzSN: W20V-525415-WVWe got this unit from a local chip company. I do not know how to use this or power it on, it has some special wiring. Local pickup, but we can ship in a crate since it’s very delicate for about ~$300.
Thermo Scientific Lindberg Blue M Tube Furnace HTF55322C **1200 C Max** - Thermo Scientific Lindberg/Blue M Tube Furnace HTF55322C - 1200 CelsiusModel Number: HTF55322C208V/240V 12A 2.67 kW50/60 HzSN: K26B-463525-KBWe got this unit from a local chip company. I do not know how to use this or power it on, it has some special wiring. Local pickup, but we can ship in a crate since it’s very delicate for about ~$300.
THELCO Laboratory Oven - GCA/Precision Scientific - Powers On - 12.5X 13 Oven - THELCO Laboratory Oven - GCA/Precision Scientific - Powers On. Used item has blemishes - powers on & warms otherwise untested.Control / safety / on light does not workSee photos for detailsSold as picturedThe absence of any mention of defects does not mean there are none
J-Kem Gemini Two Channel Temperature Controller, w/ USB Port - Includes USB interface port, which was not tested. Powered on both channels out put with Type K Thermocouple(not included) installed. If there are multiple available for sale you may not receive the one photoed, but they are all in similar condition.
Lab 1700℃ Muffle Furnace Oven Heat Treatment Sintering Analysis 100*100*100mm 1L - The low-temperature box furnace adopts polycrystalline mullite fiber lining, with a total thickness of 120-205mm, which has excellent thermal insulation and energy saving effect. The shell adopts double-layer air-cooled structure, the surface temperature of the shell is below 60 degrees, and the furnace top is a reinforced composite structure, which does not collapse in long-term use and ensures the service life of the electric furnace. This series of electric furnace is specially developed for sintering, melting and analysis of metal, non-metal and other compound materials in laboratories of universities, research institutes and industrial and mining enterprises. Excellent temperature uniformity. Quality heating elements ensure the longest heating element life, best heat radiation proper.
1200℃ 8L Electric Furnace High Temperature Box Muffle Furnace 200mm*200mm*200mm - The low-temperature box furnace adopts polycrystalline mullite fiber lining, with a total thickness of 120-205mm, which has excellent thermal insulation and energy saving effect. The shell adopts double-layer air-cooled structure, the surface temperature of the shell is below 60 degrees, and the furnace top is a reinforced composite structure, which does not collapse in long-term use and ensures the service life of the electric furnace. This series of electric furnace is specially developed for sintering, melting and analysis of metal, non-metal and other compound materials in laboratories of universities, research institutes and industrial and mining enterprises. Excellent temperature uniformity. Quality heating elements ensure the longest heating element life, best heat radiation proper.
Lab 3L Muffle Furnace Oven Heat Treatment Sintering Analysis 1200℃ 150*150*150mm - The low-temperature box furnace adopts polycrystalline mullite fiber lining, with a total thickness of 120-205mm, which has excellent thermal insulation and energy saving effect. The shell adopts double-layer air-cooled structure, the surface temperature of the shell is below 60 degrees, and the furnace top is a reinforced composite structure, which does not collapse in long-term use and ensures the service life of the electric furnace. This series of electric furnace is specially developed for sintering, melting and analysis of metal, non-metal and other compound materials in laboratories of universities, research institutes and industrial and mining enterprises. Excellent temperature uniformity. Quality heating elements ensure the longest heating element life, best heat radiation proper.
Laboratory 1L Benchtop Muffle Furnace 1200℃ Material Sintering & Analysis PID - The low-temperature box furnace adopts polycrystalline mullite fiber lining, with a total thickness of 120-205mm, which has excellent thermal insulation and energy saving effect. The shell adopts double-layer air-cooled structure, the surface temperature of the shell is below 60 degrees, and the furnace top is a reinforced composite structure, which does not collapse in long-term use and ensures the service life of the electric furnace. This series of electric furnace is specially developed for sintering, melting and analysis of metal, non-metal and other compound materials in laboratories of universities, research institutes and industrial and mining enterprises. Excellent temperature uniformity. Quality heating elements ensure the longest heating element life, best heat radiation proper.
C188069 Test Equity FH5 Forced Air Lab Oven (208-240VAC, 1Ph, 12A, to 300°C) - However, this is the extent of my testing of this oven, and it is being sold as-is. I tested it at 100°C, 150°C, 200°C, 250°C and 300 °C, and it remained stable at each of the set points. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Binder VD23 Vacuum Drying Chamber / Oven 200°C W/ KNF LABOPORT SR810 240 V - This Binder VD23 Vacuum Drying Chamber / Oven is a high-quality item for any lab or industrial setting. With a maximum temperature of 200°C, it is perfect for a variety of applications. The included KNF LABOPORT SR810 provides excellent vacuum capabilities to ensure proper drying of your samples. This item is a must-have for any lab looking to improve their drying processes.
Despatch RFD1-42-2E RAD/RFD Industrial Cabinet Oven SEE NOTES - DESPATCH Manufacturer DESPATCH Item Condition Missing accessories (Software, cables, manual, remote, etc.) Box Condition No Original box. Item(s) will have a 4"x2" internal inventory label, see pictures.
Electric Heating Blast Constant Temperature Drying Oven Digital Digital Display - Characteristics: 1.Horizontal air circularly by double air ducts, high efficiency and high uniformity. 2.PID controller, with over-temperature protection function. 3.With fan switch,LED digital display,high temperature blast motor. 4.New anti-hot handle WGLL-BE series have the following characteristics other than the above functions. 1.LCD temperature controller. 2.4 grades speed fan, adjustable for different requirements. 3.Over-temperature protection system. 4.High precision digital independent temperature limiter. 5.304:SUS304 Stainless Steel Body.
Jelrus Vista Wizard Porcelain Oven. Manual Included - The pictures you see are the exact item you will receive with only accessories you see and item in the pictures. If not in the pictures it is not included in this particular item. Item is being sold Used.
Arbin Instruments Oxford Lasers AVS - Pellentesque dui purus, convallis in odio nec, egestas tincidunt ligula. Integer id orci nec neque mattis tincidunt.
Jelrus Vista Wizard Porcelain Furnace - LED lights are dim. Pellentesque dui purus, convallis in odio nec, egestas tincidunt ligula. Integer id orci nec neque mattis tincidunt.
Lee Production Pot Four Furnace - 20 minutes. We will work with you to resolve any problem you may have. Weight: 3.59 lb. Item Specification. Capable of Reaching 900 Degrees Fahrenheit.
QUINCY LAB 20GC Analog Oven, 1.3 cu. ft. - QUINCY LAB 20GC. Analog Oven, 1.3 cu. Analog Oven, Convection Type Gravity, Temp. Range (C) Ambient 25 Degrees to 232 Degrees, Temp. Range (F) Ambient +25 Degrees to 450 Degrees, Overall Height 20.5 in, Overall Width 15 in, Overall Depth 15.25 in, Temp.
Thermal Technology Inc. 2100C Vacuum Heat Treating Furnace - 16" x 16" x 32" ELECTRIC VACUUM FURNACE. Professionally dissembled, all wires and piping match marked for reassembly. This furnace was used in a GE facility with impeccable maintenance and care. Was fully functioning when taken out of service in 2023.
Marshall by Thermcraft Tube furnace model 1026 - Light weight ceramic fiber insulation allows for rapid heat up, recovery, and cool down. Insulating vestibules allow for maximum temperature uniformity. Furnace size OD X OBL 10" X 22".
LINDBERG 54032 Tube Furnace and controller - We have a forklift on this end to assist with loading so a list gate may not be needed. 105 warehouse. For internal use Serial #737110. Volts 120/240.
K.H. Huppert Co. KLW-201C Electric Thermal Drying Oven 60Hz 120VAC 1PH - K.H. Huppert Co. KLW-201C Electric Thermal Drying Oven 60Hz 120VAC 1PH. Manufacturer:K.H. Huppert Co. (1) K.H. HUPPERT CO. KLW-201C Electric Thermal Drying Oven. Manufacturer: K.H. Huppert Co. Notes:This oven has been plugged in and turned on.
K.H. HUPPERT CO. KLW-201C Electric Thermal Drying Oven 120VAC 1PH 60Hz - K.H. HUPPERT CO. KLW-201C Electric Thermal Drying Oven 120VAC 1PH 60Hz. Manufacturer:K.H. Huppert Co. (1) K.H. HUPPERT CO. KLW-201C Electric Thermal Drying Oven. Manufacturer: K.H. Huppert Co. Notes:This oven has been plugged in and turned on.
Beckman GS-15R Refrigerated Benchtop Centrifuge - Waunakee, WI. Blackstar Science. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Free local pickup available!
U.S. Solid 15KW High Frequency Induction Heater Furnace 110V, 16:2 Turns Ratio - With 100% load design, can work in 24 hours without stop. Turns Ratio (the ratio of the number of turns in the primary to the number of turns in the secondary) 16:2. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
C188070 Test Equity FH5 Forced Air Lab Oven (208-240VAC, 1Ph, 12A, to 300°C) - However, this is the extent of my testing of this oven, and it is being sold as-is. I tested it at 100°C, 150°C, 200°C, 250°C and 300 °C, and it remained stable at each of the set points. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
VWR 1415M Laboratory Vacuum Oven - WARRANTY IS NULL VOID IF ANY ITEM IS TAMPERED WITH, OPENED OR DISASSEMBLED. ALL CLAIMS MUST BE REPORTED AND ACKNOWLEDGED WITHIN 72 HRS OF RECEIPT. WE HAVE SEVERAL WAREHOUSES. IF THERE ARE ANY PROBLEMS WITH THE ITEM DO NOT TRY TO REPAIR AND INVESTIGATE.
Blue M Electric 206 Drying Oven - Blue M Electric 206 Drying Oven. Item has cosmetic damage as seen in pictures. Was told it worked have not tested personally. See pictures for more specifications. Listed for local pick up but message us to work out freight shipment or to set up your own shipping.Check out our store for industrial surplus and more!
Precision Scientific 31102 HTM85 Mechanical Convection Laboratory Oven 300C 120V - Used Precision Scientific Group Precision Mechanical Convection Laboratory Oven Came from Aerovox Corporation Single Phase 120 V, 1.5 AMP, 1600 Watts, 50/60 HZ Catalog Number 31102 18" x 15" x 19" Inside diameter Digital Temperature 12 Hour Maximum Set Timer .
220V Lab Digital Forced Air Convection Drying Oven Adjustable Speed Fan 1KW New - 220V 101-0AB Digital Forced Air Convection Drying Oven. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Ney Barometer Mark III - Ney Barometer Mark III Dental Porcelain Oven. In extremely good condition. Can confirm that it does turn on. My father had a dental lab and this item is only gently used and in great condition. Smoke free home. Flat shipping rate because it is big and bulky, and I will have it professionally packaged and shipped to make sure you receive it in perfect condition.
Vita zyrcomat thermacouple - Vita zyrcomat thermacouple. Used in working condition. Save a lot compared to buying it new.
Quincy Lab Digital Bench Oven 31-350ER, 120V - Temperature Range. Blackstar Science. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Free local pickup available!
Lab Oven 0.9 CuFt Vacuum Drying Oven Drying Cabinet 11.8x11x11.8inch 25L - Vacuum Drying Oven is designed for heat sensitive, labile and readily oxidization materials to do drying tests, baking tests, heat treatment tests, disinfecting test, etc. Vacuum Drying Oven has a chamber volume of between 8 and 430 liters and a temperature range starting at between +10°C above room temperature up to +200°C. The drying oven interiors are made of corrosion-free stainless steel 304.It can be filled with inert gas and dry some ingredient complex materials quickly. Normally the oven is widely used in the fields of Electrics, Electronics, Instruments, Materials, Education, Medicine, chemical industry or other Scientific Research Organizations and Production Units. Feature1: (1)Heat treatment of combustible and explosive solvents (2)Specially for the drying of lacquers and.
Lab 0.9 CuFt 25L Vacuum Drying Oven Drying Cabinet 11.8x11x11.8 RT~200℃ US Stock - Vacuum Drying Oven is designed for heat sensitive, labile and readily oxidization materials to do drying tests, baking tests, heat treatment tests, disinfecting test, etc. Vacuum Drying Oven has a chamber volume of between 8 and 430 liters and a temperature range starting at between +10°C above room temperature up to +200°C. The drying oven interiors are made of corrosion-free stainless steel 304.It can be filled with inert gas and dry some ingredient complex materials quickly. Normally the oven is widely used in the fields of Electrics, Electronics, Instruments, Materials, Education, Medicine, chemical industry or other Scientific Research Organizations and Production Units. Feature1: (1)Heat treatment of combustible and explosive solvents (2)Specially for the drying of lacquers and.
Brand New digital muffle furnace High Quality 225x100x100mm With Free Shipping - (A) 225x100x100mm (9”X4”X4”). Maximum Temp. 900 Degree C With Working Temp. • Out Side Body Made Up Of Heavy Gauge G.I. Duly Powder Coated Inner Muffle With High Temp. Insulating Material. Muffle Furnace Outer Body Is Made Of Thick Mild Steel Sheet.
Thermcraft Tube Furnace 156" long 4.125" ID can be 5" diameter - Heated Chamber 5” ID x 156” L (end vestibules 4.125” ID to fit 4” tube). Also five internal tube support piers. Six 7,800W 240V zones = 48,800 total watts, 112.7A, Three Phase 240VAC. Can be used on 208V three phase service with lower max temp.
Sheldon Manufacturing SHEL LAB SMO Series SMO3 Forced Air Oven, 3 CuFt, 115V - Typical applications for the oven include aging, asphalt testing, curing, drying, pre-heating, conditioning, and life cycle testing. Horizontal Forced Airflow. This unit is equipped with a stainless-steel interior for long-life operation and easy cleaning.
R187860 Shel Lab Sheldon SI6R Incubator Repair - No Power - However, this is all the testing that was done, so it is being sold as-is for parts or repair. I could not get it to power on and noticed the fuse was out and there is a hole where it appears should be.
Being Scientific BOV-90 3.2 Cu Ft Capacity 120V Vacuum Convection Oven - This is a Being Scientific vacuum convection oven. Convection Type Vacuum. We have inspected this item and it powers on when plugged in. We do not have the capability to test the unit any further. Capacity (Cu.-Ft.).
AC110V Lab Digital Forced Air Convection Drying Oven with Temperature Controller - AC110V 60HZ. 101-2AB Digital Forced Air Convection Drying Oven. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Thermo Scientific Lab-Line 3608-5 Vacuum Chamber Laboratory Oven - Unit is missing all 4 feet. MPN DOES NOT APPLY. Item is in good condition. • The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
110V 2KW 17.3*21.6*21.6in Lab Digital Forced Air Convection Drying Baking Oven - 101-2AB Digital Forced Air Convection Drying Oven. Exterior size (D×W×H). Large double layer toughened glass window is convenient to observe the changes of contents in the box. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Thermolyne Furnace Type 1300 - Thermolyne Furnace Type 1300. Small bench top, muffle furnace. I would rather do local pickup near Fresno Ca. (Have truck, will travel). I will ship for $100 flat to anywhere in the lower 48, but only if the BIN price is reached.
J-Kem Gemini Two Channel Temperature Controller - Powered on both channels out put with Type K Thermocouple(not included) installed. If there are multiple available for sale you may not receive the one photoed, but they are all in similar condition.
BioCare Medical Desert Chamber Pro, CAT # DRY2008US, Slide Heating & Drying Oven - MFG Cat #: DRY2008US. MFG Model: Desert Chamber Pro. Buzzer alert when drying program is complete. Five preset programs for most standard drying protocols. Temperature range from 25º to 100º C. User-defined programmable multi-step protocols.
VWR Shel Lab Sheldon Mfg Model 1430 Vacuum Oven Part - cut cable , did not power on when we connected a cable to it, sold as is, unaware of what all could be wrong, unaware if repairable or not, no returns accepted on this item, has scuffs and scratches as well, latch seems to not work well .
Quincy Lab 30GC Gravity Convection Oven - This Quincy Lab 30GC Gravity Convection Oven has been fully cleaned, decontaminated, tested, inspected and verified to be in great working condition. Model: 30GC. Cabinets are as attractive as they are durable.
15KW High Frequency Induction Heater Furnace Quenching Furnace Treatment Forging - Model: 15kw. output power: 15kw. Fluctuating Frequency : 30-100KHZ. the flow rate of cooling water :0.06-0.12Mpa 7.5L/min. The integrated filter capacitor is used after the technology upgrade, the performance is more stable, the power output is larger, and the fault caused by the manual plug-in is effectively reduced.
1.9 Cu Ft 55L Vacuum Drying Oven Drying Cabinet 16.1x15.7x13.4 RT~250℃ 0.098Mpa - Vacuum Drying Oven is designed for heat sensitive, labile and readily oxidization materials to do drying tests, baking tests, heat treatment tests, disinfecting test, etc. Vacuum Drying Oven has a chamber volume of between 8 and 430 liters and a temperature range starting at between +10°C above room temperature up to +250°C. The drying oven interiors are made of corrosion-free stainless steel 304.It can be filled with inert gas and dry some ingredient complex materials quickly. Normally the oven is widely used in the fields of Electrics, Electronics, Instruments, Materials, Education, Medicine, chemical industry or other Scientific Research Organizations and Production Units. Feature1: (1)Heat treatment of combustible and explosive solvents (2)Specially for the drying of lacquers and.
Lab 0.9 CuFt 25L Vacuum Drying Oven Drying Cabinet 11.8x11x11.8 RT~250℃ 0.098Mpa - Vacuum Drying Oven is designed for heat sensitive, labile and readily oxidization materials to do drying tests, baking tests, heat treatment tests, disinfecting test, etc. Vacuum Drying Oven has a chamber volume of between 8 and 430 liters and a temperature range starting at between +10°C above room temperature up to +250°C. The drying oven interiors are made of corrosion-free stainless steel 304.It can be filled with inert gas and dry some ingredient complex materials quickly. Normally the oven is widely used in the fields of Electrics, Electronics, Instruments, Materials, Education, Medicine, chemical industry or other Scientific Research Organizations and Production Units. Feature1: (1)Heat treatment of combustible and explosive solvents (2)Specially for the drying of lacquers and.
Memmert Ufp800 Universal Drying Oven 220 Deg C. - UNIVERSAL DRYING OVEN. 220 DEG C. Walden Industrial Surplus Co. is not a distributor or the manufacturer of this item and does not warrant this item's suitability for any application. 48" W X 28" D X 64" H.
digital muffle furnace High Quality 225x100x100mm With Free Shipping - (A) 225x100x100mm (9”X4”X4”). Maximum Temp. 900 Degree C With Working Temp. • Out Side Body Made Up Of Heavy Gauge G.I. Duly Powder Coated Inner Muffle With High Temp. Insulating Material. Muffle Furnace Outer Body Is Made Of Thick Mild Steel Sheet.
Lab 1L 1700 °C Muffle Furnace for Heat Treatment Resistance Reactor Melting Oven - Features 1. The furnace body is a one-piece structure with a double-layer furnace shell, which can realize air circulation and heat insulation; the surface of high-quality carbon steel is used for rust removal and electrostatic spraying. 2. The furnace is made of light and high-purity alumina, sintered at high temperature without volatile matter. 3. The heating elements adopt high-quality molybdenum-containing resistance wires, silicon carbide rods, silicon molybdenum rods and other heating elements. The rods are reasonably distributed according to the size of the furnace and the furnace temperature is uniform. 4. When the instrument program setting is completed, just press the run button, the next heating and cooling work will be completed automatically, without manual waiting. 5. The mac.
Espec PH-101 Horizontal Oven 45°C - 200°C 3.2 cu ft Temperature Chamber - Temperature Range: +20~ 200°C. Power: AC 200V 50/60Hz 10 A. This item is large and oversized. It can only be handled by a freight truck. We can’t do it all. Products are not covered under warranty unless specified in the Ad.
Tube furnaces (lot of two ) - Both of these furnaces are two zoned. as seen in pictures. We can no longer use it because of breaking. But others may be able to alter the surface of furnace for their use. but the collars can be cut away easily if needed.
Blue M Oven Trays - WE HAVE SEVERAL WAREHOUSES. WARRANTY IS NULL VOID IF ANY ITEM IS TAMPERED WITH, OPENED OR DISASSEMBLED. IF THERE ARE ANY PROBLEMS WITH THE ITEM DO NOT TRY TO REPAIR AND INVESTIGATE.
VWR Scientific / Sheldon 1430M (9100657) Stainless Steel Vacuum Oven - This sale is for aVWR Scientific / Sheldon 1430M (9100657) Stainless Steel Vacuum Oven. The unit is really clean inside. There is sticker residue on every side of it except the back of it. This sale is for the United States ONLY.
1.9 CuFt Vacuum Oven with 12 Shelf, Pump, Tube - The DZF-6050 features a 1.9 Cu-Ft stainless steel chamber, large enough to accommodate large samples on multiple shelves. This new model featured integrated LED lighted and capability to hold up to 12 shelves.
Vacuum Oven 1.9 CuFt with 12 Shelf LCD Display - Very easy to put together and start using. Includes all necessary parts for a full system. DZF-6050 Oven. 1/2" safety glass viewing window. KF-25 Clamp, Centering Ring, 3/8" Tube Connector, 1/2" Tube Connector.
T187501 Agilent G2545A Hybridization Oven Sheldon Mfg 1012AG - 95020 (408)886-3700. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Is there a Dock or Forklift available?.
AjanDigital Muffle Furnace Made Of Kanthal Wire Useful For Ashing 225x100x100mm - (A) 225x100x100mm (9”X4”X4”). Maximum Temp. 900 Degree C With Working Temp. Muffle Furnace Outer Body Is Made Of Thick Mild Steel Sheet. Special High Temperature Alloy Wounded On The Outer Surface Of Working Chamber To Work On 220/110volt.
Fisher 718F Isotemp Oven (#4002) - APRIL 2023. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
VWR 1470 Vacuum Oven Temperature Range 9100841 - Fair Condition - This item is fully tested and in excellent working order. Item will come with a 30 Day Warranty. Cosmetically in fair condition showing moderate to heavier scuffs / scratches / blemishes from previous use. Unit is missing screws from the side. Includes Vacuum Oven as pictured. No additional items or accessories are included. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have..
Incubator laboratory Lab bacteriological incubator Lab Furnaces & Ovens - LAB INCUBATOR. AjantaExports Manual suction Machine Foot Operated Lab & Dental Other Healthcare. The product images shown are for illustration purposes only and may not be an exact representation of the product.
Across International AI T80 -80°C Cold Trap - Across International AI T80 -80°C Cold Trap. Works great. Seem like new inside. Small dent in side cover. Have crate to ship it LTL or local pick up in RI
AjantaExports Digital Muffle furnace High-temperature furnace - AjantaExports Reflection of Sound Apparatus Small. AjantaExports Manual suction Machine Foot Operated Lab & Dental Other Healthcare. AjantaExports New Style Brain Model 9 Parts Anotomical Human Model.
AjantaExports Rectangular Muffle Furnace High-temperature furnace - AjantaExports Reflection of Sound Apparatus Small. AjantaExports New Style Brain Model 9 Parts Anotomical Human Model. AjantaExports Giant Ear Model Anotomical Human Model. AjantaExports Magnified Pulmonary Alveoli Model Anotomical Human Model.
VWR Sheldon Manufacturing 1450MS Stainless Steel Vacuum Oven 9100824 *GUARANTEED - The stainless steel chamber is constructed of Type 302 stainless for corrosion-resistant, contamination free service. The VWR 1450MS has a 0.75” thick tempered glass inner door and an insulated outer door with silicone gasket that serves as a heat barrier.
1500W Dental Vacuum Porcelain Oven Furnace Veneers Ceramic Porcelain Furnace - Power: max 1500w. Use real color touch screen.simple and easy to operate. PHOENIX porcelain furnace desktop providesfour shortcut program button, the user can save the common program in it. PHOENIX both in the porcelaintransparency degree, porcelain shape retention, have a very perfect performance, using Sr-3 soft fire reaenerationtechnology, the strength of the tooth body do better performance.
Lab Oven, Cascade CDO-5 Dry, Cascade Sciences Decarb Oven, 5 cu ft, 120V, - Mistakes may happen and might go above and beyond to resolve any issues. We always reply within a few hours. We will respond and resolve any issue very shortly. What you see in the photos is what exactly you receive.
Shimadzu LC-20AD Prominence Liquid Chromatograph Pump #15116 - Item #15116. Not tested for any analytical application (liquid) at our facility. Local pickup: allowed (handling fee applies). No escrows. Weight: approx. Our testing very often is limited to power up test or basic functions available on the external keypad of the device (if available).
Shimadzu DGU-14A Degasser #15113 - Shimadzu DGU-14A Degasser. Item #15113. If you received incorrect item, it is our fault and we will take full responsibility. Your full cooperation in this matter is required and appreciated. We hope this is understandable.
Quincy Lab 40GCE Gravity Convection Oven 1500 Watts, 12.5 Amps - Fair Condition - This item is fully tested and in excellent working order. Item will come with a 30 Day Warranty. Cosmetically in fair condition showing moderate to heavier scuffs / scratches / blemishes from previous use One of the racks is missing one rack holder. Includes Gravity Convection Oven and 2 racks as pictured. No additional items or accessories are included. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have..
Shimadzu RF-10A XL HPLC Liquid Chromatography Fluorescence Detector FLD #15112 - Item #15112. Shimadzu RF-10A XL Fluorescence Detector FLD. Shimadzu RF-10A XL Fluorescence Detector. Not tested for any analytical application (liquid) at our facility. Weight: approx. Simply inform the driver that you refuse to accept your item in this condition.
Quincy Lab 30AFE-LT Mechanical Convection Oven - This item is fully tested and in excellent working order. Item will come with a 30 Day Warranty. Cosmetically in good condition showing minor scuffs / scratches / blemishes from previous use. Includes Convection Oven as pictured. No additional items or accessories are included. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have..
30ml Alu 99% Conical corundum crucible melting furnace crucible metal casting h - 1 x Corundum Crucible. Capacity: 30ml. Casting formation, high density. Material: Aluminium oxide. Good temperature resistant, good resistance. High, Al2O3 more than 99%. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing.
Electric thermostatic drying oven Temperature Adjustable Two Layer 50-480℉ 220v - 220V Digital Forced Air Convection Drying Oven. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
220V Digital Forced Air Convection Drying Oven Drying Heat CabinetAdjust Fan 1KW - 220V 101-0AB Digital Forced Air Convection Drying Oven. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
1700℃ Max Vacuum Resistance Atmosphere Furnace Intelligent Temperature Control - 【Internal structure】Adopt international advanced lightweight alumina ceramic fiber, with 30-50 segment programmable PID self-tuning, automatic heating, automatic cooling, no need to be on duty. The optional RS-485 communication interface (connecting to a common computer to start, stop, suspend heating, curve storage, historical curve recording, etc.) 【Product performance】The atmosphere furnace body has good sealing performance, the vacuum degree can reach 600PA, the maximum temperature of the imported resistance wire can reach: 1700 ℃, the operation is simple, and the loading and unloading is convenient. 【Passable gas】The atmosphere furnace is a special furnace type designed for products requiring atmosphere protection. The inert gas, nitrogen gas, or vacuum can also be introduced into the.
Metalox 200-C High Temperature Column Oven - Metalox 200-C High Temperature Column Oven. Powers on. All buttons responsive. Tested to 80C and seems to function as intended.
Thermolyne Lab Furnace F6010 Thermo Scientific - Thermolyne Lab Furnace Muffle F6010. Conduct industrial applications including ashing organic and inorganic samples and conducting gravimetric analysis with Thermo Scientific™ Thermolyne™ Premium Large Muffle Furnaces. Unit has four heating elements, which are located on the chamber top, bottom and sides for enhanced temperature uniformity. Built-in vent port removes undesirable contaminants and moisture to extend the life of the element and unit.Max Temp 1200CBuyer responsible for arranging freight.
Lindberg 55122-1 Hinged Tube Furnace W/ Lindberg 58114 Controller - This item is fully tested and in excellent working order. Item will come with a 30 Day Warranty. Cosmetically in good condition showing minor scuffs / scratches / blemishes from previous use. Includes Hinged Tube Furnace and Lindberg 58114 Controller as pictured. No additional items or accessories are included. One of the screws on the exterior have some rust. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have..
Lab-Line model 3476M Imperial V Lab Oven. - Lab-Line model 3476M Imperial V Lab Oven.has been used previously. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Precision Scientific FREAS Lab Oven Model 645 - Model: FREAS 645. MPN: FREAS 645. Available for sale is a Precision Scientific FREAS Lab Oven Model 645. This oven has been tested and does reach the intended temp of 160 as shown in the photos. This oven is 208/230v single phase.
U.S. Solid 25KW High Frequency Induction Heater Furnace 480V, 18:1 Turns Ratio - With 100% load design, can work in 24 hours without stop. Turns Ratio (the ratio of the number of turns in the primary to the number of turns in the secondary) 18:1. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
U.S. Solid 15KW High Frequency Induction Heater Furnace 220V, 16:2 Turns Ratio - With 100% load design, can work in 24 hours without stop. Turns Ratio (the ratio of the number of turns in the primary to the number of turns in the secondary) 16:2. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
Amersham Pharmacia Hybridization Oven /Shaker - (#3978) - We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Amersham Pharmacia Hybridization Oven /Shaker - (#3977) - We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Labnet Hybaid Model H9320- (#3975) - Powers up! We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Vita Vacumat 40 Dental Porcelain Oven Dental Lab oven-AS/IS - Vita Vacumat 40 Dental Porcelain Oven Dental Lab oven Used Selling AS/IS. See photos carefully before purchase since photos are part of the description and condition on item.Please check my other listings for more available items.Any questions call 626)494-7857
DESPATCH 12kW Oven, PBC 2-24, 210° C. Max, 208V, 2’ x 3’ x 4’ - For sale is a used DESPATCH 12kW Oven, PBC 2-24, 210° C. Max, 208V, 2’ x 3’ x 4’. It’s listed as for parts or not working only because there is no warranty. It’s a used piece of equipment and was pulled from a working environment about 8 years ago. Message me for a freight quote. It might take several days for me to get a pallet built and get it ready to ship so please have patience. Storage: BLUE B 50
T187115 MTI DZF-6020-HT/500 High Temperature Compact Vacuum Oven - Didn't match the temperature setting. The interior has significant. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
220V Digital Forced Air Convection Drying Oven Dryer Heat Treatment Cabinet 2KW - 220V 101-2AB Digital Forced Air Convection Drying Oven. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Ambrell Ekoheat 30/100 Solid State Induction Power Supply CE rated - Remote Workhead, EKOHEAT. Input: 360-520 VAC, 50/60 Hz, 3 Phase. Never been used. requires external heat station. two 1/2" OD quick disconnect water fittings for capacitor cooling I/O (water lines not included).
Tube Lab Furnace Electro Heat Systems 115V. Used Surplus - This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the sale. This item is to be used for its intended purpose.
Across International Vacuum Drying Oven 1.9 cubic ft. - In a vacuum drying oven, thermal processes occur in an airtight chamber where a desired level of vacuum has been applied using an external vacuum pump. Vacuum ovens are used in a variety of ways. Such as helping to prevent surface reactions (such as oxidation), sample decontamination (such as removing lubricants), as well as for speeding up the out gassing process.
VWR Scientific Model 1510E Bench Top Gravity Convention Incubator (#3962) - Powers up, and heats! We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Image Press pressing/porcelain oven combo with vacuum pump works well. - Image Press pressing/porcelain oven combo with vacuum pump. Works well just change the program and the base for pressing or porcelain firing. One recommendation for best results is to run any program to preheat the pressing base. Loved this oven but we are retiring and time to let go of everything. The oven will be shipped from Florida.
Precision Scientific FREAS Lab Oven Model 645 - MPN: FREAS 645. Available for sale is a Precision Scientific FREAS Lab Oven Model 645. Model: 645. This oven has been tested and does reach the intended temp of 160 as shown in the photos. This oven is 208/230v 3phase.
USA Lab 3.2 CuFt Vacuum Drying Oven w/ 6 Shelves (12 Slots) 150°C 110V 5 Side... - Our USA Lab vacuum ovens are a top of the line product compared to others that are currently on the market while maintaining an affordable price. We also provide an all stainless-steel tubing interior, oil filled vacuum gauge, stainless steel vacuum vent & valve, and a 1-year warranty.
USA Lab 1.9 CuFt Vacuum Drying Oven w/ 5 Shelves (10 Slots) 200°C 110V 4 Side... - Our USA Lab vacuum drying oven is a top of the line product compared to others that are currently on the market while maintaining an affordable price. We also provide an all stainless-steel tubing interior, oil filled vacuum gauge, stainless steel vacuum vent & valve, and a 1-year warranty.
VWR Shel Lab 1430M Stainless Steel Vacuum Oven Part# CQ-429-02 - Heats up to set temp 50C per last lab user but did not test at highest temp, unable to check vacuum. Or ask for freight quote. available with affordable mileage fee. Free local pickup.
Barnstead International / High-Temperature Oven F21135. Used Surplus - This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the sale. This item is to be used for its intended purpose.
Fisher Scientific Isotemp 13-247-10 Rotisserie Oven - Fisher Scientific Isotemp 13-247-10 Rotisserie Oven Being sold as is as pictured for parts or repair. 13003 Murphy Rd. #E1. EquipD LLC. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Tint Unit BPI 9Qt - 9 quart tint unit used for optical lens manufacturing. Heat elements are used. Tank is sealed therefore, doesn't leak. Picture doesn't show all 9 tanks but will ship complete. Hand tank remover is included. Holds two gradient lens timers. Works great. Closed lab and retiring.
Digital Air Convection Drying Oven Lab Heating Cabinet 17.3*21.6*21.6in 110V 2KW - 101-2AB Digital Forced Air Convection Drying Oven. The shell is made of high quality cold-rolled steel plate, surface electrostatic spraying. Large double layer toughened glass window is convenient to observe the changes of contents in the box.
Despatch Oven Lxd Series Lxd1-42-2 - System was de-installed in working operational condition. WE HAVE SEVERAL WAREHOUSES. WARRANTY IS NULL VOID IF ANY ITEM IS TAMPERED WITH, OPENED OR DISASSEMBLED. IF THERE ARE ANY PROBLEMS WITH THE ITEM DO NOT TRY TO REPAIR AND INVESTIGATE.
Lindberg/Blue M CC58114PBC with Eurotherm 2416 Control Consoles *Parts/Repair* - MODEL NUMBER: CC58114PBC. We do not have the connection or accessory to test the unit, so the unit is being sold for parts/repair. Review pictures for more details. INCLUDED: Unit only. No accessory/part is included in the sale; including but not limited to power cord, power adapter, and batteries.
Barnstead Lab-Line Model 495 Incubator - The exact serial number shown in the photos. However, we are only photographing one. You may not receive. We are 305consumables located at 13700 NW 19th Av, Bay 12, Opa Locka, FL, 33054. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
ACROSS INTERNATIONAL 1.9 CF Vacuum Oven w/ 110/220V 9 cfm 2-Stage Pump - I think I even have a T shirt. I don't think this unit even has 25 hours on it. It is basically new and fully tested, ready to go. AccuTemp-19 series digital desktop vacuum ovens feature a 1.9 cubic foot easy-to-clean stainless steel chamber with a large dual-layer tempered glass safety window and small footprint.
Defective Sheldon Shel Lab VWR Model 1340 Lab Oven AS-IS - For parts or not working Defective Sheldon Shel Lab VWR Model 1340 Lab Oven AS-IS. Well, I will give you a few reasons:1. You ended up on this page because you are searching for aSheldon Laboratory Systems 1340.
T186767 Lindberg Blue M MO1490A-1 Mechanical Oven 260ºC Max - Point that was set at 290ºC. This unit has scuffs and scratches present, as well as staining and discoloration. I was able to power on this unit and it heated up but kept heating beyond the 260ºC set point, until it hit the alarm.
Lab-Line 3478 Imperial V Convection oven (#3949) - Powers up. For us to check rates, we need the following info: 1. We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided.
TORREY PINES Echotherm Chilling Incubator MODEL # IN45 (#3943) - We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Lab-Line Imperial III 305 Incubator (#3941) - Powers up. For us to check rates, we need the following info: 1. We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided.
Ritehete melting pot, 6 quart capacity - One (1) used Ritehete melting pot, 6 quart capacity, 18 gauge stainless steel crucible, 20 gauge stainless steel shell, loose aluminum lid with heat resistant knob, analog controls, type VRS, 110-volts, 5 amps
UVP Lab Products HL-2000 Hybrilinker Hybridzation Oven UV Crosslinker - You are bidding on one good used UVP Hybrilinker combination Hybridization oven and UV crosslinker. This unit is in good cosmetic and working condition. I pack carefully and ship promptly from central Pennsylvania. Free shipping is to the continental US.
LINDBERG FURNACE Stove Type 51894 - LINDBERG FURNACE Stove Type 51894. Listed for parts because I am not able to test it. See pictures or ask questions. It is 220 v
Lab Safety Supply Forced Air Oven Model 32EZ24 - Never used. Minor scratching from storage. See Specs below. Forced Air. Overall Depth. Chamber Depth. Capacity (Cu.-Ft.). Capacity (ML).
Lab 1200℃ Vacuum Tube Muffle Furnace 51 Programmable Electric Heat 40mm x 300mm - The vacuum tube furnace adopts high purity quartz tube or high purity alumina tube as the furnace tube. The working temperature range is 300℃ to 1600℃. Customers can choose and buy according to the actual needs. The control system of this series of equipment is internationally advanced, with safe and reliable, simple operation, high temperature control precision, good thermal insulation effect, high furnace temperature uniformity, can be vacuum through the atmosphere and other characteristics. Product application: Widely used in enterprises and institutions scientific research and small batch production, as well as colleges and universities involved in scientific research and teaching of ceramics, metallurgy, electronics, glass, chemical, machinery, refractory materials, new material.
THERMOLYNE EL 11X3 MUFFLE FURNACE HEATER ELEMENT CERAMIC 12759 5" x 9" NOS - This listing is for 1 new old stock Thermolyne Muffle Furnace Heater Element part # EL11X3 . Approximately 5" width x 9" length. Shows some minor storage wear, dirtiness or very minor chipping along very outer edges. Box was opened to take these pictures. See the 16 expanding pictures provided for more detail information and conditions. Please make sure that this is what you need before purchasing, as it is non-returnable item.
Sheldon Shel-Lab 1320 Gravity Convention Oven ! (314382) - ((InvIDs))314382(((InvIDs))). Item Location: tekyard MN Warehouse. Is your location semi-truck accessible?. A White Glove service can also install the freight in many instances. (We are not providing White Glove Services).
Quincy Labs Inc. 10-100 Oven - Quincy Labs Inc. 10-100 Oven. Unit powers on but on/off light flickers, may be a loose wire or connection. heat is felt Listed as parts or repair. Shipping cost is for lower U.S 48
BLUE M VO-19C VACUUM OVEN - 17"L x 16" Daimeter Chamber - BLUE M VO-19C VACUUM OVEN. We have a loading dock and fork lifts with the ability to load any type of truck. -- 16" DIA X 17.5" DEEP. We can provide freight quotes. we can either use your account number or provide a rate quote.
Lab 1700℃ Electric Lift Muffle Furnace Dental Zirconia Ceramic Sintering Oven - This Zirconia sintering furnaces is perfectly suited for sintering zirconia crown. The special high purity Molybdenum disilicide heating elements offer best possible protection against chemical interaction between charge and heating elements. The zirconia crown are positioned in ceramic sintering trays. Up to three sintering trays can be stacked into the furnace. FEATURES: Max temperature: 1700℃ Working temperature: 1600℃ Automatic program for heating, platform moving. It’s very convenient for dental crown firing. Touch screen panel which can store 50pcs different programs 30 programmable segments for precise control. Built in protection for over-heated and broken Thermal couple. 6pcs high purity MoSi2 heating element can achieve 30℃/min fast heating rate. 1 year limited w.
Lab Dental Sintering Muffle Furnace Ceramic Sintering Oven Touch Screen 1700℃ - FEATURES: Max temperature: 1700℃ Working temperature: 1600℃ Automatic program for heating, platform moving. It’s very convenient for dental crown firing. Touch screen panel which can store 50pcs different programs 30 programmable segments for precise control. Built in protection for over-heated and broken Thermal couple. 6pcs high purity MoSi2 heating element can achieve 30℃/min fast heating rate. 1 year limited warranty (Consumable parts such as thermocouple, o-rings and heating elements are not covered by the warranty.).
Boekel Scientific Ccc 5.0A Cat No 139400 Incubator (#3936) - Powers up. Power cord is not included. We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Fisher Scientific 650D Incubator Oven (#3934) - MARCH 2023. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Sheldon Model Sm12 Shel-Lab Oven (#3933) - Powers up. We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Sheldon Model Sm12 Shel-Lab Oven (#3932) - Powers up. We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Fisher Scientific 650F Incubator (#3931) - MARCH 2023. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Fisher Scientific 655D Incubator (#3930) - MARCH 2023. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Thermo Scientific Model 637D Isotemp Incubator (#3924) - Powers up. We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Vwr Sheldon Model 1315U Gravity Oven Incubator (#3923) - Powers up. We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Thermo Scientific Model 3727 Lab Incubator (#3922) - Powers up. For us to check rates, we need the following info: 1. We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided.
New Brunswick Scientific Model Innova 4200 Incubator (#3919) - We are quick to respond and resolve. Powers up. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Barnstead Thermolyne Model 153325 Oven Incubator (#3918) - We are quick to respond and resolve. MARCH 2023. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Heller Reflow Oven 1088 (3/23) - Item: Heller Reflow Oven. Model Number: 1088. Location: Container 17. This item seems to have missing cards in the rear. The unit's electrical may have been tampered with. Asset #001990. Local pickup is available in San Diego.
Sirona Cerec lower door insulation NEW 6581750, D3639 - Sirona Cerec lower door insulation NEW 6581750, D3639. Comes as pictured. Box has been opened for pictures only, part is still sealed. Free shipping to the continental United states, ships same or next business day.
Baxter Scientific Products DP-61 Vacuum Oven 210°C, 8 Cu. Ft. w/ Vacuum Pump - Baxter Scientific Products DP-61 Vacuum Oven 210°C, 8 Cu. Ft. w/ Vacuum Pump. The unit has also been tested in our facility and found to be in good working condition. WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING PRODUCTS AND SERVICE.
TECHTONGDA 1.9 Cu Ft Industrial Laboratory Digital Vacuum Drying Oven 110V 1400W - Force adjustable door handle and one-piece door sealing gasket maintain consistent vacuum level. Vacuum degree. Pumping rate of matching vacuum pump 2L. Pump not included. Easy-to-clean heavy duty 304 stainless steel interior for exceptional durability and ease of maintenance.
Lab-Line Squaroid Vacuum Oven 1400W Duo-Vac 100°C 1.7 Cu.Ft. 120 VAC - You are purchasing one used good working condition Lab-Line Squaroid Vacuum Oven 1400W Duo-Vac 100°C 1.7 Cu.Ft. 120 VAC. With vacuum pump as pictured, oven draws down and holds good vacuum for several hours Uven heats good but Tempature settings have not been callibrated or reset, you will need to do that when you recieved your oven This unit is shipped by freight from 05454 use our shipping or send call tag with local pickup 5837-LED-03-08-23
Lab-Line 273-772 Equatherm Laboratory Oven - There is a slight dent o the top front of this oven (see photos). Good working condition showing signs of normal previous use. 22" x 18" x 13".
Vacuum Drying Heat Treat Oven 110V 1.9 Cu Ft Digital Temperature Control - 110V 1.9 Cu Ft Digital Vacuum Drying Oven Industrial Lab Air Convection. This device is used for drying and heating processes under vacuum conditions at laboratories in enterprises, schools and scientific institutions.
Blue M Single Wall Gravity Convection Laboratory Oven Sw-11Ta (Dep59) - No accessories including standard power cord/cable. Powers up! Sold as is for parts or repair! We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided.
Mihm-Vogt Type KM3 Preheating Furnace - Mihm-Vogt type KM3 preheating furnace Mihm-Vogt type KM3 preheating furnace The device is in very good condition Execution/equipment/condition according to photos! -Laboratory setup & expansion -Furthermore, we offer you plenty of micromotors, whether used or new - Purchase and disposal of devices whether new, old or defective Visitation on site by appointment possible and desired All offers are tested goods, as we attach great importance to the satisfaction of our customers. Since this is a used device, we cannot rule out signs of use. Please read our shop policies before you bid! If you have any questions about this device, call us! You get a bill with designated value-added tax. Please inquire about international shipping costs beforehand. / Please ask international shipment costs be.
antique Barkmeyer dental oven - It is Untested, due to the old frayed cord, The cord can be easily replaced, but we will leave that up to the new owner.
Fisher Scientific Isotemp Oven Model 750-58;10-750-58 #2100TTFML - Fisher Scientific Isotemp Oven Model 750-58;10-750-58 #2100TTFML. **Door is slightly bent but still closes good and locks**If you have any questions please contact us To a business with a dock or fork lift access Only
Jelrus Radiance multistage Burn out oven CASH ONLY- NO SHIPPING - NO SHIPPING . Please contact me before purchasing. This is an older furnace and can be damaged by shipping companies. LOCAL PICKUP ONLY Jelrus Radiance multistage Burn out oven. Excellent working condition. If you are in Southwest Florida, we can make arrangements to meet at a specific location.
VWR 1535 Digital Incubator 2-Shelf ID 24x24x20" OD 30x30x32" AS/IS - (1) VWR 1535 Digital Incubator 2-Shelf ID 24x24x20" OD 30x30x32" 115V 50/60Hz 5A. OD 30x30x32". ID 24x24x20". Manufacturer:VWR Scientific. Manufacturer: VWR Scientific. Condition:For Parts or Not Working.
Baxter Lab-Line Instruments J1450-4 TempCon Incubator OD 30.5" x 22" x 31.5" - Notes:We plugged in this incubator and observed the temperature reach and maintain ~140 degrees F. The doors are a bit janky and do not close very well or tightly. They seem to sit closed but do not lock tight or hold tight to the oven.
Make Offer DENTAL LAB Ney 660 Modular Oven Furnace Jewelry READ - Needs resoldered switch /. re-riveted rear aux plug /. door latch it may need more but unaware and not skilled enough to say it doesn’t. WE DO NOT ALTER CUSTOM FORMS. I’m not sure what vacuum does as I do not have an external vacuum to test with.
Blue M Model Ov-12A Gravity Oven (#3874) - We are quick to respond and resolve. February 2023. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Lindberg Blue M GO1350A-1 Gravity Convection Oven - Lindberg Blue M GO1350A-1 Gravity Convection Oven. Unit is tested and in good working condition. Couple scratches throughout the casing. Selling as is, no returns. ALL SELLS ARE FINAL.
15KW 220V High-frequency Induction Heating Machine Silver Gold Melting Furnace - Model: 15kw. output power: 15kw. Work power : single phase 220V 50/60hz. Fluctuating Frequency : 30-100KHZ. the flow rate of cooling water :0.2Mpa. The integrated filter capacitor is used after the technology upgrade, the performance is more stable, the power output is larger, and the fault caused by the manual plug-in is effectively reduced.
VWR Shel Lab 1330FM PN: 9071047 Signature Forced Air Safety Oven 1.6 Cu. Ft. - (1) VWR Shel Lab 1330FM PN: 9071047 Signature Forced Air Safety Oven. Model: 1330FM. PN: 9071047. Manufacturer: VWR / Shel Lab. Notes:We plugged in this oven and powered it on. The power light, temp indicator lights, and temperature readout light are illuminated.
VWR Shel Lab 1330FM PN: 9071047 Signature Forced Air Safety Oven AS/IS - Parts - Model: 1330FM. PN: 9071047. Manufacturer: VWR / Shel Lab. Notes:We replaced the fuse from another unit in our inventory and we were able to power up this oven. The indicator lights and LED display functioned, but as we adjusted the temperature it would continually revert back to a setting of LOW and the oven would not heat up.
SPX Blue M Electric Double Oven - Model No. STK-05W-G-MP550 Gently used overall very nice condition. Professionally replaced the control panel with all new parts approximately 5 years ago. Only used every couple of months, not a daily used machine. Professionally maintained. Used for R&D for large dental firm, not for daily production. Has RS485 communications. Local pickup preferred but will ship freight.
VWR Scientific 1410 Industrial Benchtop Laboratory Vacuum Oven AS/IS - Manufacturer:VWR Scientific. Manufacturer: VWR Scientific. Model: 1410. Condition:For Parts or Not Working. This vacuum oven is in AS/IS condition with scuffs and scratches from previous use. Lab & Test.
15KW High Frequency Induction Heater Furnace Quenching Melting Furnace Iron Weld - Model: 15kw. output power: 15kw. Fluctuating Frequency : 30-100KHZ. the flow rate of cooling water :0.06-0.12Mpa 7.5L/min. The integrated filter capacitor is used after the technology upgrade, the performance is more stable, the power output is larger, and the fault caused by the manual plug-in is effectively reduced.
Therm Scientific Heratherm Oms180 51028875 Oven - MODEL : OMS180 51028875. MANUFACTUER: THERM SCIENTIFIC. TEMPERATURE RANGE: 50°C TO 250°C. WEIGHT: 146lbs. MAX SHELF LOAD: 55lbs. SHELVES: 19.
Precision Quincy X2-3-202020 350°F Horizontal Airflow Cabinet Laboratory Oven - This item is fully tested and in excellent working order. Item will come with a 30 Day Warranty. Cosmetically in good condition showing moderate scuffs / scratches / blemishes from previous use. Unit is missing the cabinet key. The ducting at the top is a bit bent out of shape. Includes oven as pictured. No additional items or accessories are included. Unless pictured, no power adapter / power cable included. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have. .
Fisher Scientific Model 110 Lab Oven UNKNOWN - Outside is pretty clean considering the age of the oven. Unit does need a new power cord as the age of the rubber cord has cracked itself. Unit overall is pretty good.
Carbolite ELF 11/14 Muffle Furnace - Materials such as wet paints or powder paints can be hardened with this muffle furnace. Temperature range: up to 1100 ºC.
Benchmark Scientific BSH1002 Double Position Digital Dry Bath Incubator, 20 W... - The cavities of the high grade aluminum blocks are precision machined to match the conical size and shape of 0.5, 1.5, 2.0, 15 and 50ml tube sizes, providing unsurpassed temperature uniformity. Nine assorted blocks are available in total for compatibility with nearly all common tube sizes.
15KW High Frequency Induction Heater Furnace Quenching Melting Furnace Iron Weld - Model: 15kw. output power: 15kw. Fluctuating Frequency : 30-100KHZ. the flow rate of cooling water :0.06-0.12Mpa 7.5L/min. The integrated filter capacitor is used after the technology upgrade, the performance is more stable, the power output is larger, and the fault caused by the manual plug-in is effectively reduced.
Thermal Technology Model 1000-2560-Fp20 220V Furnace (#3833) - No accessories, no cords, no power cord. Sold as is for parts or repair! Let us know if you want to arrange your own freight or would like us to get you a quote. We are quick to respond and resolve.
Centor Vacuum Industries Vacuum Furnace 220V Model 3X8 (#3832) - No accessories, no cords, no power cord. Sold as is for parts or repair! Let us know if you want to arrange your own freight or would like us to get you a quote. We are quick to respond and resolve.
Dentsply Sirona Multimat Cube Ceramic Furnace (As-Is) - MODEL Multimat Cube. • The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. MPN Does Not Apply.
Lot of 4 Barber-Colman 590 Controllers For Oven/Heat Laboratory-Untested-S7168 R - They are connected together in a mounting bracket. We do not have the knowledge to test these units. Dan Batson, DGD Inc. The sale if this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Despatch Oven, Test Oven, Lab Oven, process oven, LCC2-14V-3 - Despatch LCC2-14V-3. Programmable door lock prevents operators from opening oven door when cycle is in process. Available with HEPA filtration - Recirculated airflow is 100% HEPA (High Efficiency Particulate Air) filtered for operation at ISO Class 5 (Class 100) throughout the cycle.
Fisher Scientific 281 Isotemp Vacuum Oven Cat# 13-261-50 - Appears to be in good to fair external condition. Heats up but did not test at highest temp, unable to check vacuum. Or ask for freight quote. available with affordable mileage fee. Free local pickup.
Thermo Scientific VWR Industrial Lab Vacuum Oven, Model 6290, 12.5L/0.44cf - The unit features a top-mounted independent evacuation and venting vacuum fittings. Heating system optimizes chamber space for drying, curing, vacuum embedding, and plating applications. Vacuum level is displayed on gauges from 0 to 30 in Hg.
Ney Centurion Q50 Dental Furnace Restoration Heating Lab Oven Machine 100 - 230V - The Centurion Q50 is a dental ceramic oven used during the production of ceramic dental restorations such as crowns, bridges, inlays and onlays. Dental ceramic ovens employ high temperatures and pressures to process ceramic materials into a hardened, final state.
Lucifer Furnaces DL7-O48/DL7-048 18" W x 18" H x 48" D 2000˚F Furnace 460 VAC - Lucifer Furnaces DL7-O48 18" W x 18" H x 48" D 2000°F Furnace. Specifications are from Lucifer and may vary slightly due to upgrades, options, or revisions this unit may or may not have. The 7000 series furnace can be used for hardening, drawing, preheating, annealing, brazing, normalizing and special applications in air atmosphere.
Agilent Technologies G2545A Hybridization Oven - DuBois, PA 15801. KMA Remarketing Corporation. After this information is collected, we will then get quotes from (3) three different carriers and pass on the best-priced quote to you. Does this location have a loading dock?.
BARNSTEAD LAB-LINE Vacuum Oven 3606 - Middle East. We are here to help! I want to see your happy face. We will reply you within 24 hours. However, I learned that there are many people who need Japanese goods all over the world.
Jelrus Vista Wizard Porcelain Oven. Pump & Manual Included. Works Great! - Jelrus Vista Wizard Porcelain vacuum Oven. Pump, manual, calibrator & stone. Used But Well Maintained and Works Great! Suitable for all kinds of ceramic materials. 115 volts 15 Amps50-60 HzThis oven is over $3000 when bought new - this is a steal!!!!
Across International HP7 Magnetic Stirrer with 7" Heated Plate, PID Control. - Across International 350C 2000RPM 1-Gallon PID Magnetic Stirrer with 7" Heated Plate, HP7. The rotating field may be created either by a rotating magnet or a set of stationary electromagnets, placed beneath the vessel with the liquid.
SunFire 10 Plus Porcelain Oven - SunFire 10 Plus Porcelain Oven. It was build by NEY in America! This unit has not been used a lot. It was a back up - used but in good working condition. Clean firing chamber. Lots of hours left to fire your porcelain - Local pick up only - can meet in central MA, or close to Lockport NY -
ATS Applied Test Systems Lab Furnace / Creep Machine - Series 3000 - High Temp - Facility, I think it is basocally complete?. The cross bar shown goes with another furnace and that furnace has this units cross bar, I just need to switch them out. I have more to be listed that are shown in the last 2 photos, except the one that has the rocker arm and it was sold to Space-X about 2 years ago.
Fisher 10-750-14A Isotemp Benchtop Programmable Muffle Furnace 950C/1742F Max. - Isotemp programmable muffle furnace. Benchtop furnace. (1) Fisher 10-750-14A Muffle Furnace. Notes:This unit is in mostly-working condition. The fan works. The door needs to be closed firmly for it to be able to latch, but the latch holds.
Lindberg 55035 Tube Furnace (Thy115) - We are quick to respond and resolve. January 2023. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Shenpaz Sintra Plus - Shenpaz Sintra Plus. New oven, bent from shipping and missing one heating element and firing table. This is a work house for your lab!
Carbolite High Temperature Modified Atmosphere Oven / HTMA 6/28 /600C -4 mo wrty - Model HTMA 6/28. Carbolite High Temperature Modified Atmosphere Oven. Oxygen Sensor Option. N&R Scientific Co. of 200 Roosevelt Place in Palisades Park, New Jersey. We are minutes from Manhattan, and local to all 3 New York City Area Airports.
Ship Now! Mint-Demo VWR Safety Oven - Model 1350FMS / 4 c.f / 240C / 6 mo wrty - Model 1350FMS. Specifications for VWR Signature Forced Air Safety Ovens 1350FMS VWR / Shellab Safety Oven. VWR® Two-Year Limited Parts and Labor Warranty. Light use as drying oven. Clean Chamber - no corrosion, no chemical residue.
Tenney Bench Top Lab Oven Model TBO-1 tested and running excellent 572 F max. - This is a Tenney Bench Top Lab Oven, tested and running excellent! 572 F max temp. They are subject to withdrawal, change and prior sale without notice. All orders received are binding only when they have been accepted and acknowledged by us in writing.
Quincy Lab 10Gc Analog Oven, 0.7 Cu. Ft. - QUINCY LAB. Analog Oven, Convection Type Gravity, Temp. Range (C) Ambient 25 Degrees to 232 Degrees, Temp. Range (F) Ambient +25 Degrees to 450 Degrees, Overall Height 17.5 in, Overall Width 14 in, Overall Depth 12.25 in, Temp.
Napco Vacuum Oven Model 5851 (#3814) - No accessories including standard power cord/cable. Powers up! Sold as is for parts or repair! Let us know if you want to arrange your own freight or would like us to get you a quote. We are quick to respond and resolve.
Dako Hybridizer for Molecular Pathology - Dako Hybridizer for Molecular Pathology - tested working. This goes for Hawaii, Alaska, Puerto Rico, Guam and the Virgin Islands. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Orca Dekema Basic Sintering oven 220 Volt. - Orca Dekema Basic Sintering oven. This unit is in great shape. It runs on 220 Volt. Made in Germany!Originally paid 15,000 dollars for this unit
*TESTED* Fisher Scientific Isotemp 400 Forced Draft Oven Model 412, 120v 10A - *TESTED* Fisher Scientific Isotemp 400 Forced Draft Oven Model 412, 120v 10A. Temperature sensor not included in purchase. Very clean oven, reaches 150°C with no problem and can go higher- I just didn't have time for a longer test. Works on 120v power. Due to large size and weight, will need to be shipped via freight. Buyer is responsible for paying for freight shipping costs.
Uvp Hb-1000 Hybridizer Hybridization Oven ! (316168) - ((InvIDs))316168(((InvIDs))). "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. North Carolina 7.00%. Maryland 6.00%.
Techne Roller Blot Hybridiser HB-3D Model FHB3DP Lab Oven - These pieces are often used but in good working condition. Baton Rouge, Louisiana. Drago's Antiques LLC. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Shenpaz Sintra Plus - Shenpaz Sintra Plus. Like new used around 100hrs. This furnace in mint condition bought brand new in order to fabricate in house but didn't get enough work so sat in my sintering room for 3 yrs. I would say i used it less than what a lab use in a month over the 3yrs. NOTE: buyer pay shipping cost this is very heavy item ,what eBay recommend will not cover shipping and handling cost. Message me for shipping cost
1200℃ Multifunctional Laboratory High Temperature Electric Furnace 2000W/1000W - 1X electric furnace host. Nickel-chromium resistance wire heating, heating up quickly, up to 1200℃. Refractory brick tray, high temperature resistance without cracking. 1X Electric stove cover. With refractory brick cover, less heat loss and high heating efficiency.
Ney Centurion Q50 Furnace Oven w/Vac Pump by Dentsply - Ney Centurion Q50 Furnace Oven w/Vacumm Pump. A lift gate is provided with the truck to lower the pallet to the ground. > Fast heat rates of up to 400°F/minute. We are committed to provide everything you need for your dental office from the front door to the back door.
VITA VACUMAT 250 PORCELAIN FURNACE dental lab laboratory office - VITA VACUMAT 250 PORCELAIN FURNACE dental lab laboratory office. In working condition Selling AS-ISSEE photos carefully before purchase since photos are part of the description and condition on item Any questions call 626)494-7857
Vita Inceramat Ceramic Oven,For Dental - - VITA INCERAMAT CERAMIC OVEN,FOR DENTAL -. Used In working condition Please see photos carefully before purchase since photos are part of the description and condition on item Any questions call 626)494-7857Selling AS-IS
BAKER Furnace electronic oven EBO 40-40-62 - This oven is in great shape. It was formerly owned by Toyota racing development used to heat engine blocks. It is a 480 volt machine. Baker furnace is still in business and able to consult or provide service parts for this item. This item is located in Rolla, Missouri ... loading is free of charge. I'm happy to arrange shipping, buyer pays. Reasonable offers entertained.
Digital Forced Air Convection Drying Oven Heat Treatment Box Fan Switch 220V 1KW - 220V 101-0AB Digital Forced Air Convection Drying Oven. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Lab Dryer Forced Air Oven Hot Air Circulation Drying Oven for Sterilization 250℃ - Product introduction Blast Drying Oven is designed to do drying test, baking test, heat treatment test, disinfecting test, etc. It can be filed with inert gas and dry some ingredient complex materials quickly. 1. It is applicable to such test as drying, cure melting, sterilizing in industrial and mining enterprises as well as in laboratory and scientific research institutes. 2. Used for drying, baking wax-melting and sterilization for industrial in mining enterprises, laboratories, research units, etc. 3. It is applicable for drying, cure, melting and sterilization in industrial and mining enterprises, laboratories and scientific research institutes. Features 1. The oven body of inside adopts mirror stainless steel (or wire drawing board)argon arc-welding, shell adopts high quality s.
Dental Crucible for Zirconia Crowns Sintered Crucible with Cover Holding Bead - 3, opened mouth conducive to heat transfer through the heat crown will not heat evenly uneven temperature warpage. 5,thickness of wall: 3.5mm or so. 2, apertures strong high thermal conductivity and thermal shock resistance can be repeatedly used strong.
Dental Crucible for Zirconia Crowns Sintered Crucible with Cover Holding Bead - 3, opened mouth conducive to heat transfer through the heat crown will not heat evenly uneven temperature warpage. 5,thickness of wall: 3.5mm or so. 2, apertures strong high thermal conductivity and thermal shock resistance can be repeatedly used strong.
Lab-Line EquaTherm Oven 299-739 - Title: Lab-Line EquaTherm Oven 299-739. Model: EquaTherm Oven. Item Information: Lab-Line EquaTherm Oven 299-739. Item Powers On When Connected to AC. Item Shown in Pictures is What You Will Recieve, Nothing More, Nothing Less.
bench top furnace - up to 1100C - Includes graphite crucible, gloves, specially designed tongs, and manual. Up to 2012 degrees Fahrenheit (1100 degrees Celsius). Good price compared to new.
Hotpack 2133024 Industrial Forced Convection Oven 208V 1Ph Parts or Repair - Model: 2133024. 208V Single Phase. BULLSEYE INDUSTRIAL SALES, LLC. Sold as is for parts or repair. Need it urgently?. Call us and we will do what we can to get it to you quickly. To get a freight quote we will need to know the following.
SB Lindberg Hevi-Duty 59344 Controller - Up for sale is a Pre-owned SB Lindberg Hevi-Duty 59344 Controller. Unit shows signs of shelf wear, dents and scratches. Please look at the pictures. Shipped with USPS Priority Mail Package or similar service.Location: A1-SR-08
Blue-M CC-05-C-P-B Clean Room Mechanical Convection Oven 250°C 5 cu. ft. - The unit's maximum temperature is 350°C without the HEPA filter installed. The HEPA filter installed is used. Epoxy curing. It has been redesigned with care to maintain all of its superior qualities and improved to provide greater performance characteristics in a number of important areas.
Thickened Digital Forced Air Convection Drying Oven Multipurpose (101-0AB) 220V - Large double layer toughened glass window is convenient to observe the changes of contents in the box. 220V 101-0AB Digital Forced Air Convection Drying Oven (160110). Application: This device is used for drying and heating processes through hot air circulation system at laboratories in enterprises,schools and scientific institutions.
Laboratory Digital Forced Air Convection Drying Oven 220V Adjustable Speed Fan - 220V Industrial Laboratory Digital Forced Air Convection Drying Oven Adjustable Speed Fan Stainless Steel Inner Chamber. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
2017 Sheldon SHEL LAB SMO3 Forced Air Oven 3 CuFt, 150 Deg C, 115V - Model: SMO3. New: August 2017. Make: Sheldon Mfg Laboratory Oven. Type: Forced Air Oven. This is fresh from a lab that closed as a result of Covid. Didn't see regular use when it was in the lab. Overall great condition.
Digital Forced Air Convection Drying Oven 2-Layer Tempered Glass Window 220V US - Large double layer toughened glass window is convenient to observe the changes of contents in the box. 220V 101-0AB Digital Forced Air Convection Drying Oven (160110). Application: This device is used for drying and heating processes through hot air circulation system at laboratories in enterprises,schools and scientific institutions.
Fisher ISOtemp Model 281 Vacuum Lab Oven 120v W/trays -30 Day Warranty👍🇺🇸 - Fisher ISOtemp Model 281 Vacuum Oven Laboratory 120v W/trays -30 Day Warranty👍🇺🇸. Oven has cosmetic scratches please see pictures . Tested working . Does not come with a vacuum pump those are installed outside of your oven . Low temperature cure
220V Digital Forced Air Convection Drying Oven Heat Treatment Adjust Fan 1000W - 220V 101-0AB Digital Forced Air Convection Drying Oven. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
6 Bpi color tint unit pans - 6 BPI Color Tint Unit PANS. Pans in photo are no longer available. Pans shipped will need to be cleaned Stainless steel Buyer will receive pans available Items sold as is returns accepted. Please review returned policy before purchasing. Immediate same day payment required.
VWR Scientific Model 1430 Vacuum Oven 9.2 AMP 1200 WATT 120 Volt - IT is a VWR Scientific model 1430 Vacuum Oven as pictured. It is marked 120 volt, 9.2 AMP, 1200 Watt. From printers & plotters to floor scrubbers & Oscilloscope. We are located in LOCKPORT IL, about 35 miles SW of Chicago IL.
Yamato Scientific DP-61 Vacuum Drying Oven 8 cu ft 200C - Unit is fully tested and working. Holds vacuum and gets up to temperature. This unit has 14 shelves in the unit as well as a shelf at the bottom of the unit for convenience. Local pickup in Toronto.
R185047 Shel-Lab Sheldon 1510E Lab Oven - 95020 (408)886-3700. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Thermo Scientific SC-100-S45 - 41 Liter Stainless Steel Heated Bath Circulator - Stainless steel - rugged and corrosion-resistant for high-temperature applications. Bath Circulator, Heating; Thermo Scientific; SAHARA series; Stainless Steel; Model S45 With SC100 thermostat. The Thermo Scientific heating bath circulators are ergoniomically designed with the user in mind and are UL/CSA/CE compliant for safe operation.
Boekel ACD HyBEZ II Hybridization Oven 240200ACD - For Sale This ACD 240200ACD HyBEZ II Hybridization Oven tested working properly. Pellentesque dui purus, convallis in odio nec, egestas tincidunt ligula. Integer id orci nec neque mattis tincidunt.
Fisher Scientific Isotemp 500 Series Model 526G lab oven tested working - Fisher Scientific Isotemp 500 Series Model 526G. This lab oven is pre-owned and it appears to be in good physical and working condition. Local pick-up can also be arranged if you prefer. The pictures depict the actual unit that you will receive.
Boekel Scientific InSlide Out Hybridization Oven 241000 - Prepared slides are placed into the InSlide Out's™ uniquely sealed aluminum tray for incubation, which maintains humidity and prevents the slides from drying out. The InSlide Out's™ rapid heat-up and excellent temperature stability ensure consistency from test to test, making it ideal for use in hybridization and immunohistochemical procedures.
Lindberg Blue M Moldatherm Box Furnace BF51848A-1 - Moldatherm Box Furnace. Lindberg Blue M. MAKE: LINDBERG BLUE M. ITEM: BOX FURNACE. FUNCTIONALITY: USED - SEE PHOTOS OF UNIT HEATING. MODEL: BF51848A-1.
Fisher Isotemp Oven 516G TESTED with warranty SEE Video - This gravity oven has a temperature range of 5°C over ambient to 210°C with an accuracy of ± 2.0° and a capacity of 1.7 cubic feet. The door to this laboratory oven opens up to 180° for easy unloading and loading of samples.
VWR 1415M Vacuum Oven TESTED with Warranty SEE VIDEO - The VWR 1415M Vacuum Oven is dependable and long-lasting, with sturdy construction and excellent uniformity. VWR Vacuum Oven | CAT# 1415M. With over a decade of industry experience both owners have brought a variety of unique skill sets to The Lab World Group.
TestEquity Chambers FH5 Forced Air Oven, Tested Functional - • Forced Air Convection. • Air Intake and Exhaust Ports. • 430 Mirror Finish Stainless Steel Interior. Horizontal air flow provides fast heat-up and recovery and ensures rapid drying. • Temperature Uniformity 2°C @ 150°C.
25KW 1500° High Frequency Induction Heating Melting Furnace Machine Welding - 1 x 25KW 1500° High Frequency Induction Heating furnace Machine. With 100%load design, can work in 24 hours without stop. Induction Heating Power:25KW. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
INTBUYING® Digital Forced Air Convection Drying Oven Heat Treatment 220V 160170 - INTBUYING ®. 1 Set ofDigital Forced Air Convection Drying Oven 160170. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan,ensuring that the fan service life is longer and the temperature in the box is more uniform.
BLUE M No. IGF 6680F-3 Max Temp 1100 F INERT GAS FORCED AIR OVEN - This is aBLUE M No. IGF 6680F-3 20" x 18" x 20", 1100 F INERT GAS FORCED AIR OVEN. Tested and Runs Excellent! Part # IGF 6680F-3. 593 Degrees C / 1100 Degrees F. Three Phase. They are subject to withdrawal, change and prior sale without notice.
Fisherbrand Isotemp Heating Blocks Vanlab VWR -Unused Vintag - For Isotemp digital models 125DQ, 145DQ and analog dry-bath incubators. Choose from blocks that hold 6 to 25mm O.D. standard tubes, 15mL or 50mL conical-bottom tubes, microcentrifuge tubes. Sample wells are shaped so that heat is evenly transmitted to all parts of the sample tube.
Hotpack 2133024-1 Industrial Forced Convection Oven 208V 1Ph - BULLSEYE INDUSTRIAL SALES, LLC. Tested and Heats up fans work208V single Phase. implied or. Need it urgently?. Call us and we will do what we can to get it to you quickly. Unless otherwise specifically agreed to in writing by.
Lab Companion AAH14016U, OF-01E Forced Convection Oven, 1.8 CF - This model is a fast drying bench oven with vertical air-flow. Forced air convection generated by a circular fan providing high and uniform drying performance. Range (C / F):Amb. +10 to 220 / Amb. +18 to 428.
PRECISION SCIENTIFIC #625 325C LAB OVEN - 19" x 19" x 19" SEE VIDEO - PRECISION SCIENTIFIC #625 325C LAB OVEN. Precision 325C Oven. -- 15 - 325C. -- 19" X 19" X 19" - INSIDE. Video will open in a new window. We have a loading dock and fork lifts with the ability to load any type of truck.
Thermcraft 1,200C Lab Split Tube Furnace - We have a loading dock and fork lifts with the ability to load any type of truck. we can either use your account number or provide a rate quote. -- WGT: 200LBS. We can provide freight quotes.
Grieve Oven Model SA-350 Class A 250F Max Temp - Grieve Oven Model SA-350 Convection Oven. With 4 shelves for oven. Oven for sale as-is. -Class A rated for up to 0.2 Gallons of solvent to 250F.
Thermotron S-16-H 16 cu.ft. 453 liters Oven Incubator 130*C 208V 3phase 19A - Thermotron S-16-H 16 cu.ft. 453 liters Oven Incubator 130 C 208V 3phase 19A. (1) Thermotron S-16-H Oven/Incubator. Manufacturer: Thermotron. The interior light does not have a bulb. The temperature rises quickly to a few degrees from set point, then settles slowly in at the set temperature and holds steady.
Blue M OV-8A Stabil-Therm Gravity Oven- Tested - Blue M OV-8A Stabil-Therm Gravity Oven- Tested. Cord needs to be changed out but does power on and heat. Listing as parts because do not know how to properly test it. Missing one knob.
Boekel ILLUMINA 230402ILL Laboratory Hybridization Oven SEE NOTES - 230402ILL Product Condition Boekel Manufacturer Boekel Item Condition Hybridization Oven Manufacturer Part Number Item(s) will have a 4"x2" internal inventory label, see pictures. Weight (lbs): 53.00.
Digital Forced Air Convection Drying Oven 220V Lab Drying Machinery 101-2AB US - 1 Set of Digital Forced Air Convection Drying Oven 160170. Large double layer toughened glass window is convenient to observe the changes of contents in the box. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan,ensuring that the fan service life is longer and the temperature in the box is more uniform.
Cole Parmer Digital Oven Forced Air Drying Oven BPG-7016 - Oven has never actually been used. However it does have significant amount of cosmetic scuffs, dents, scratches, blemishes, and imperfections. Please see all pictures for exact cosmetic condition. Also see last picture for exact specs. Includes ONLY what is in the pictures. No other accessories will be included. Will NOT ship to Hawaii, Puerto Rico, Alaska, a PO Box, or a APO / FPO (please contact me before hand and maybe we can arrange something). Unit will be shipped after payment with signature confirmation upon delivery.
Jeneric Pentron JP 1200 Porcelain Furnace Complete Used Dental Lab Equipment,... - Jeneric Pentron JP 1200 Porcelain Furnace Complete Used Dental Lab Equipment,.... Comes w pump, owners Manuel, all plugs wires and hoses needed to run right out of box. Very nice shape as you can see from pics. Fully tested by our in house tech. Ran several programs w no issues If new sold for $4895.00
Sirona D3497 InFire HTC Speed Sintering Furnace REF 6401272 - The unit includes a power cord. There is chipped paint and scratch marks around the furnace. Includes everything in the pictures and nothing else. "The sale of this item may be subject to strict regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Elconap Stainless Steel Oven, Furnace (AH-1). For Repair. - Elconap Stainless Steel Oven (AH-1).The Elconap oven is a type of electrical oven containing a metal carcass with double doors, a metal exterior door and glass interior door. The top of the carcass contains a thermostat control and two air vents. A socket for a bulb is located near the bottom of the carcass. It measures 15"x16"x20". It needs Resistance wire on the elements replaced. Wires are sold on eBay. WARNING ⚠️. IF YOU DON'T KNOW HOW TO FIX IT, DON'T TOUCH IT. IT COULD BE DANGEROUS MESSING WITH IT.
Cress Model C1228Dw / F4Hlc Bench Top Tempering Furnace - C1228DW 12" x 17" x 8" 25" x 43" x 28" 1250° F 1000° F 3.5 400 lbs. "Draw Furnaces" also known as annealing, tempering or forced. They are used for such purposes as tempering, annealing and stress relieving.
jeio Lab Companion Universal Attachment SKC-7000SA-7012 - Laboratory shakers agitate liquids during laboratory procedures. These devices can be analog or digital and are typically an automated, electrically powered, countertop unit that shakes liquid in lab containers, such as flasks, funnels, or test tubes.
Thermo Lindberg Blue Mbf51866A Box Furnace 120V 1100C Max ( Missing Part ) - Good shape with light wear and tear. What you see is what you get. No accessories or adapters. I have only tested this item to power on. It heats up. I think it is missing an interior part to seal the front side of the oven.
Kiln - thermo scientific 240v atmosphere controled ashing furnace - Programmable thermo scientific 240v atmosphere controled ashing furnace. Lightly used in a professional setting. Model No. F2060C-33-60-80Capacity- 14 L / 0.5 Cubic FtTemperature Range- 100 to 975°CChamber- 6.8"H x 12.8"W x 10"DStability- 3°C at 1000°CDimensions- 21"H x 19.1"W x 20"DElectrical- 240 V / 60 Hz / 19.5 ampsPower- 4000 Watts
Cascade CDO-5 Dry & Decarb Oven, 5 cu ft, 120V, Brand New!! - Temperature Range: +2°C (36°F) above room temp to 180°C (350°F). Impact at cold temperatures is likely to cause strand cracking or breakage. Heat Deflection Temperature: 90°C (194°F). Softening Point: 152°C (305°F).
Blue M Gravity Convection Oven SW-11TA-1 - used but in good working condition, comes only as pictured, no other kind of accessories included apart from what is pictured, has some scuffs and scratches as well .
VWR 414004-584 Vacuum Oven 25-200ºC, 120V w/ Shelves - The unit has also been tested in our facility and found to be in good working condition. WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING PRODUCTS AND SERVICE. If the item is listed as working, then it was tested to the best of our ability.
New 17.32*21.6*21.6"Chamber101-2AB Lab Digital Forced Air Convection Drying Oven - TECHTONGDA®17.32" 21.6" 21.6"Chamber 101-2AB Lab Digital Forced Air Convection Drying Oven 110V. 17.32" 21.6" 21.6"Chamber 101-2AB Lab Digital Forced Air Convection Drying Oven 110V. Large double layer toughened glass window is convenient to observe the changes of contents in the box.
700°F Wisconsin Oven Model SWT-4066-G7 Gas Fired Batch Type Oven - 72” x 48” x 72” Interior. It is complete with lift door and drive in / roll in interior. The interior appears to be in very good condition. No containers. Electrics 3 Phase, 60 Cycle, 460 Volt. Exhaust 900 CFM 1-1/2 HP.
Gelman Little Giant model 13154 Pressure vacuum Pump - Model: 13154. - Manufacturer: Gelman. - Pressure Vacuum Pump. - Vacuum Gauge. - Type: Pressure/Vacuum Pump. - Pressure Gauge. Doesn’t Turn On. - Power Cord.
VWR Scientific Boekel 230500V Model 5400 Hibridization Oven - 1841 W Carriage House Dr, Baton Rouge, LA 70815. This item is sold by Kandara, LLC. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Digital Forced Air Convection Drying Oven,1.5 cu ft, 110V,13.78''×13.4''×13.78'' - 101-0AB Digital Forced Air Convection Drying Oven. Large double layer toughened glass window is convenient to observe the changes of contents in the box. Exterior size (D×W×H). Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
C184301 PRiNTA Systems 990 CC Convection Curing Oven 14" Conveyer Belt (450°F) - This PRiNTA Systems 990 CC Convection Curing Oven features a 14"-wide Conveyer Belt. It powers up, and the digital display is bright and clear, and the conveyer belt moves in both directions, and the speed is adjustable, and the oven heats up fine.
Digital Forced Air Convection Drying Oven 2.7HP Heat Treat Lab Dryed Oven SALES - 110V101-2AB Digital Forced Air Convection Drying Oven (160144). Handle :The opening door of the machine is equipped with a handle,which is convenient for opening the door.The tightness of the door handle can be adjusted,which is easy to use,more stable in closing,and better in sealing.
Alliance Pressurized Stainless Oven Roll to Roll Film Dryer Convection Blowers - Here is a custom stainless steel roll to roll dryer which appears to be either for film or thin wafers. This has what appears to be infrared heaters in the top of the chamber. There are supporting rollers on both sides and in the center of the chamber. The chamber is insulated, and the blowers appear to create positive differential pressure in the interior. The side slots are just under 8". It seems easily adaptable to any thin object under that width.
Applied Test Systems Series 3210 Split Furnace Max 700°C 800W Great Condition! - Applied Test Systems Series 3210 Split Furnace Max 700°C 800W Great Condition!Furnace has not been tested but was removed from a working system and is believed to be functional. However, I cannot offer any returns or refunds. Thanks for looking!Any and all offers are welcome and reviewed!Shipped via USPS priority mail.
Electric Heating Constant Drying Oven Automatic Digital Display Pressure - Electric Heating Constant Temperature Vacuum Drying Oven 300w Automatic Digital Display Pressure Regulating Heating Oven. Liner material: cold-rolled plate high temperature spray. Power: 300W. Model: DZF6020/DZF6020Z.
GCA Gravity Convection Oven Heating Coil Assembly - These pieces are often used but in good working condition. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Baton Rouge, Louisiana.
Industrial Laboratory Digital Forced Air Convection Drying Oven 220V 1KW - Power: 1KW. Industrial Laboratory Digital Forced Air Convection Drying Oven 220V Adjustable Speed Fan Stainless Steel Inner Chamber. Large double layer toughened glass window is convenient to observe the changes of contents in the box.
5x5x8 Electric Powder Coating Batch Oven - 5x5x8 Electric Batch Oven. G 90 Galvanized Sheeting inside and out. Available as Electric as well. Double walled construction.
Lindberg Oven Blue M - Gravity Convection- 1 cu ft- TESTED with Warranty SEE VID - The Thermo Lindberg Blue Oven is Gravity convection lab oven with uniform heating throughout. Lindberg Oven Blue M mo1420a ID 16396. Lindberg Oven Blue M | CAT# MO1420A. Capacity 1 cu ft. (28.31 L). With over a decade of industry experience both owners have brought a variety of unique skill sets to The Lab World Group.
Across International Vacuum Oven Accutemp-160 w/Pump - ONE Oven & Pump per order! Heating: 250 watts x 6, built into 6 aluminum shelves, for the fastest, most energy efficient and uniform heating. Ultimate vacuum level: better than 500 microns/millitorrs.
Lab 0.9CuFt 25L Vacuum Drying Oven 5-Side Heating 7 Shelves 0~250℃ 0.098Mpa 110V - Voltage:110V 60HZ,Input Power:800W Stainless steel working chamber. Air convection oven made of high-quality cold-rolled steel with electrostatic spray on surface;Easy-to-clean and heavy-duty electropolished vacuum chamber, Rectangular chamber, ensuring maximum sufficient volume Vacuum drying oven uses microcomputer temperature controller, High-performance MCU-based temperature controller with advanced PID algorithm to maintain temperature uniformity (+/- 1 °F) from low temperature to 480 °F (ca. 249 °C). Large LCD screen display, able to show multi-group data. The menu-style user interface, easy to understand and operate.Force adjustable door handle and one-piece door sealing gasket maintain consistent vacuum level.
Lab 0.9 Cu Ft 12x12x11" Vacuum Drying Oven Digital 5-Side Heating 7 Shelves 110V - Voltage:110V 60HZ,Input Power:800W Stainless steel working chamber. Air convection oven made of high-quality cold-rolled steel with electrostatic spray on surface;Easy-to-clean and heavy-duty electropolished vacuum chamber, Rectangular chamber, ensuring maximum sufficient volume Vacuum drying oven uses microcomputer temperature controller, High-performance MCU-based temperature controller with advanced PID algorithm to maintain temperature uniformity (+/- 1 °F) from low temperature to 480 °F (ca. 249 °C). Large LCD screen display, able to show multi-group data. The menu-style user interface, easy to understand and operate.Force adjustable door handle and one-piece door sealing gasket maintain consistent vacuum level.
350C 2000RPM 0.8-Gallon PID Magnetic Stirrer 5.5" Heated Plate - The rotating field may be created either by a rotating magnet or a set of stationary electromagnets placed beneath the vessel with the liquid. Since glass does not affect a magnetic field appreciably it is transparent to magnetism and most chemical reactions take place in glass vessels i.e. see beaker glassware or laboratory flasks magnetic stir bars work well in glass vessels.
Blue M / Lindberg Unknown Model Oven 5.6 Cu. Ft. 120V - Blue M / Lindberg Unknown Model Oven 5.6 Cu. The unit has also been tested in our facility and found to be in good working condition. This item is as seen in pictures. HOURS OF OPERATION. If the item is listed as working, then it was tested to the best of our ability.
T183997 Blue M OV-490A-3 Lab Oven w/ 1 Shelf 19"Wx15"Dx18"H Chamber - I was able to power on this oven and heard the fan running. a few minutes. The oven didn't seem to heat very much after being left on for a couple of hours. Is there a Dock or Forklift available?. drilled holes next to one of the side ports as shown.
Sage Comfort 7937 Personal Cleansing Warmer @ (303740) - ((InvIDs))303740(((InvIDs))). Minnesota 7.125%. This fee covers both heat treated and non heat treated crates. Item Location: tekyard NC Warehouse. Accessories / Cables / Stand International / Other Locations.
Hardware Factory Store HFS DZF-6050-T Vacuum Oven 1.9 Cu Ft, 482°F - The unit has also been tested in our facility and found to be in good working condition. If the item is listed as working, then it was tested to the best of our ability. This item is as seen in pictures.
memmert UNB 100 Universal Laboratory Oven - The chamber is made from. Laboratory Oven. HighTemperature scientific oven. Industrial Single Board Computers. fault finding. Manually adjustable air valve for recirculation or fresh air operation.
Lab 1.9 CuFt Vacuum Drying Oven 55L Tray Dryer 5-Side Heating 10 Shelves Black - Voltage:110V 60HZ,Input Power:1400W Stainless steel working chamber. Air convection oven made of high-quality cold-rolled steel with electrostatic spray on surface;Easy-to-clean and heavy-duty electropolished vacuum chamber, Rectangular chamber, ensuring maximum sufficient volume Vacuum drying oven uses microcomputer temperature controller, High-performance MCU-based temperature controller with advanced PID algorithm to maintain temperature uniformity (+/- 1 °F) from low temperature to 480 °F (ca. 249 °C). Large LCD screen display, able to show multi-group data. The menu-style user interface, easy to understand and operate.Force adjustable door handle and one-piece door sealing gasket maintain consistent vacuum level.
101-0AB Lab Digital Forced Air Convection Drying Oven 110V 1KW 25.6×17.7×20.5in - 101-0AB Digital Forced Air Convection Drying Oven. Large double layer toughened glass window is convenient to observe the changes of contents in the box. Exterior size (D×W×H). Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Omi Fmc Cr-38120 7727 - If you are not able to pick up locally, we are able to get competitive freight quotes as well.
Boekel Big SHOT III Hybridization Oven - Model 230402 - Detailed Overview: Unit has been tested and is fully functional. Heats up, carousel spins, buttons are all tactile and functional. Working Condition: Great.
Napco 5831 Laboratory Benchtop Vacuum Oven - Napco 5831 Vacuum Oven. For applications using corrosive vapors, aromatic hydrocarbons, production of semiconductors, storage of vacuum tubes, or electronic parts that need to remain contamination-free.
Dentsply Model 904979 Dental Lab Furnace (As-Is) - MODEL 904979. • The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Item powers on and heats up (unsure if it reaches max temp).
Carbolite AAF 11/18 Muffle Furnace - Used - Two tier rack system doubling sample capacity. 2 sided heating. Sample tray and loading handle. Preheating of air before it enters the chamber gives excellent uniformity. Low chamber height holds airflow close to samples for optimum combustion.
Vacuum Drying Oven.. 1.9cf - Brand new WTVO vacuum drying oven. This was bought and set on a bench but never used. 1.9 cubic ft. Includes 10 drying shelves. Shipping can be aranged if buyer cant pickup locally.
Dental Burnout Furnace High Temperature Burnout Oven Wax Muffle Furnace - The burnout furnace designed for dental casting, this machine uses high-quality furnace materials and high-quality furnace wire for longer life and faster heating. Dental MuffleBurnout Furnace. This machine uses high-quality furnace materials and high-quality furnace wire for longer life and faster heating.
Sentro Tech SVT-1300C Vacuum Furnace - Sentro Tech 1300C Vaccum Furnace. 16 KW208 single phase 90A Rigid ceramic insulation With high temperature alloy heating elements. Amazingly clean like new condition with very little use. Very simple operation with integrated transformer, vacuum pump and temperature controller. Perfect for a lab setting or pilot production. Loaded onto your truck.
WEST TUNE RT+ 20~150 ℉ 5 shelves 1.9cf Vacuum Oven With 10 Shelves - WTVO vacuum ovens are specially designed for degassing or purification of essential oil extracts. Using the technique of cold boiling, the oven works in a delicate ambient temp. heat atmosphere under reduced pressure conditions to expedite solvent degassing while perfectly preserving color, aroma, and overall solute quality.
30ml Alu 99% Conical corundum crucible melting furnace crucible metal casting h - 1 x Corundum Crucible. Capacity: 30ml. Casting formation, high density. Material: Aluminium oxide. Good temperature resistant, good chemical resistance. High purity, Al2O3 more than 99%. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing.
Precision 45EM Scientific Lab Incubator 51221135 Gravity Oven 50-210C 4.5 cu.ft. - Part # : 51221135. (1) Precision Model 45EM Scientific Laboratory Oven 50 To 210C 4.5 Cubic Ft. Model: 45EM. Notes:We powered the oven on and tested it at the 4th and max settings. At dial setting 4 the oven successfully stabilized at 110 celsius, and at the max dial setting, it stabilized at 210 celsius.
TESTED- WORKS VWR Scientific 1430 120v 10A 1.5 Cu. Ft. Vacuum Oven w/ Shelf - TESTED- WORKS VWR Scientific 1430 120v 10A 1.5 Cu. Ft. Vacuum Oven w/ Shelf. Works well. Tested to 175° C, goes higher. Temperature sensor not included. Due to large size, will be shipped freight. Buyer responsible for cost of freight shipping and palletization.
Despatch Model LCC1-11-2 Clean Room Oven 260C / 500F Max Bench Top Single Phase - Despatch lfd1-42-2 oven used in good condition everything worked as it should I used it for powder coating upgraded to a bigger oven I had it hardwired in so it will need to be hardwired again or a plug put on it’s a nice little oven that worked great.
NEW CM Inc High Temperatures Furnace Controller 170468 - 1841 W Carriage House Dr, Baton Rouge, LA 70815. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. For all others, there will be extra.
Grieve Vent/Welding Oven Ebs-350 (#3687) - For us to check rates, we need the following info: 1. August 2022. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Grieve Vent/Welding Oven Ebs-350 (#3688) - For us to check rates, we need the following info: 1. August 2022. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Baxter DN-43 Oven TESTED with Warranty SEE VIDEO - The Baxter DN-43 Oven is a constant temperature drying oven with forced air circulation. The 3.2 cu ft interior also uses a 10w condenser motor blower fan to circulate heat throughout the space, for a temperature uniformity of 0.75°C within a set point.
PHOENIX-9C CAD CAM Oven Dental Lab Furnace Zirconia Fast Sintering Furnace - Fast sintering of the fully form. Maximum sintering temperature 1530 C. Program selection prompt to prevent using wrong program. VOICE PROMPT. We'd like to settle any problem in a friendly manner. Operation range:100-120V 50/60HZ 230V 50/60HZ.
Precision Scientific Gca Gravity Convection Oven Economy Model 16Eg 31576710 - All pictures shown above are of actual product(s) sold. Item(s) are sold-as-is as shown in pictures above. It was previously used at a local university, Unit powers on, heats up and works. Only includes what is shown in pictures below.
Thermo Scientific Thermolyne FB1418M Muffle Furnace (208V) - Power 208V 50/60 Hz / 7.30A / 1520W. INCLUDED IN YOUR INVOICE. Approvals CSA. Chamber Stability at 1000°C ±0.5°C. Chamber Uniformity at 1000°C ±5.0°C. Drop-down door doubles as a convenient shelf for loading and unloading.
Thermolyne F6028C-60 Furnace - THERMOLYNE F6028C-60 FURNACE. The cord was cut off of this unit. So if you know how to fix that then get it cheap. Local pick up is free or message me about shipping BR Gr
Napco Industrial Laboratory Benchtop Vacuum Oven Heater - Model: 5831 - 1841 W Carriage House Dr, Baton Rouge, LA 70815. This item is sold by Kandara, LLC. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Grieve Corp Laboratory Oven - Grieve Corp Laboratory Oven.Grieve Corp laboratory oven model LR270C, power light comes on, does not heat, may need heating element replacement.
TESTED- WORKS Napco 320 Incubator 120v 265W - TESTED- WORKS Napco 320 Incubator 120v 265W. Used. In good condition. Only includes 1 shelf. Tested up to about 54°C, does go higher as well. Has to be shipped via freight due to the large size. Buyer responsible paying for freight charges.
VWR 1330F Forced Air Batch Convection Oven - Recently removed from working Laboratory and guaranteed functional. Cosmetically in good condition showing minor scuffs / scratches / blemishes from previous use. Includes Convection Oven as pictured. No additional items or accessories are included. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have. .
Lab Furnaces Digital Forced Air Convection Drying Oven Adjust Speed Temperature - 13.7" x 13.7" Digital Forced Air Convection Drying Oven. 101-0AB Digital Forced Air Convection Drying Oven. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
TECHTONGDA® Digital Forced Air Convection Drying Oven 13.8"*13.4"*13.8"110V 1KW - TECHTONGDA®. 13.78" 13.4" 13.78" Lab Digital Forced Air Convection Drying Oven 110V. 110V Adjust Speed Fan 13.78" 13.4" 13.78" Lab Digital Forced Air Convection Drying Oven. Large double layer toughened glass window is convenient to observe the changes of contents in the box.
Enhanced Net Rack for 1.9 Cu Ft Drying Oven Stainless Steel Net Rack 1 PC - Net Rack for 1.9 Cu Ft Drying Oven Stainless Steel Net Rack. 1 Set of Net Rack for 1.9 Cu Ft Drying Oven (160448). Made of stainless steel,durable and safe. Hope for your understanding. ▲ 6 months' warranty for the machines, not for the consumables.
Mti ksl 1200x furnace - I have a total of 7 units. All are similar in cosmetic condition. All are being sold as is for parts. I know the one pictured does not work. However, the others have not been test, but probably don’t work or may need some work to get to properly function. I will send out the best looking one in cosmetic condition first. The one pictured will be mailed out last unless buyer wants the one pictured. Thanks for the look and the buy!
INTBUYING® 1.9 Cuft Vacuum Oven 2 Stainless Shelves Vacuum Drying Oven 7-160452 - INTBUYING ®. 1 Set of 110V Vacuum Drying Oven 1.9Cu ft 110V Powered Lab Vacuum Drying Oven(160452). Vacuum Drying Oven 1.9Cu ft 110V Powered Lab Vacuum Drying Oven with 2 Layers Stainless Steel Bracket Desktop Digital Vacuum Oven 50~250℃.
350C 1500RPM 0.8-Gallon Magnetic Stirrer with 6" Heated Plate - The rotating field may be created either by a rotating magnet or a set of stationary electromagnets placed beneath the vessel with the liquid. Since glass does not affect a magnetic field appreciably it is transparent to magnetism and most chemical reactions take place in glass vessels i.e. see beaker glassware or laboratory flasks magnetic stir bars work well in glass vessels.
15KW All Solid State Mid-frequency Induction Heater Furnace A - Model: 15KW. Mould heating. With high efficient and energy-saving, and it has high factor and power efficiency. Oscillation Frequency: 1-10 KHz. Duty Cycle: 100%. Output Current: 200A-1500A.
Lindberg / Blue M Mechanical Lab Oven MO1440SA-1 (300 C Max Temp) - This lab oven was recently retired from a local university lab. It has been tested to 300 degrees C and is in good working order. There are a few small dents around the edges and various scuffs/scratches from previous use.
Xh-600-Nm-He Modern Equipment Exothermic Inert Atmospheric Gas Generator - 29737 - NOTE: An Exothermic Atmosphere Generator Is One That Converts A. Combustion Reaction Is Self-Supporting, Giving Off Heat (i.e. exothermic). ATMOSPHERIC GAS GENERATOR. Water Separator. Combustibles As Hydrogen And Carbon Monoxide With Traces.
FOR PARTS Thelco Precision 120v 51221144 Laboratory Oven - Thelco Precision 120v 51221144 Laboratory Oven. Includes everything pictured. Does not appear to power on when plugged in. May be a circuitry issue. Fuse is not blown and that was the only attempt made at repair. For Parts or not working. Will be shipped via freight. Buyer is responsible for the cost of freight shipping.
T183073 Sheldon Shel Lab CR1-2 Clean Room Oven 9071305 - The oven heated to an. Model/Serial number label is very faded as shown. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
BINDER Oven: Series E Classic Line with mechanical adjustment, model E028-120V - · Outstanding thermal insulation saves operation costs. · Identical test conditions throughout the chamber interior independent of sample size and quantity. · Temperature range: 60 °C to 230 °C. · Class 1 temperature limitation device (Model E028-230V-T).
1pc Investment Ring embedding ring Dental Lab Porcelain Furnace Accessary - For Porcelain Furnace For Press. Compatible with Ivoclar Furnace. 1 Full set 28 1 Dental Acrylic Teeth VITA Color A2 Size 503 Denture New On SALE. 2000pcs Barrier Envelopes Size 2 Dental Digital X-Ray ScanX for Phosphor Plate.
Ibex Summit Press Porcelain Furnace w/ Pump & Accessories Dental Restoration - Manufacturer: Ibex. Model: Summit Press. No manufacture warranty included. Vacuum Pump Status: Included. Any party that unsuccessfully challenges the enforceability of this Choice of Law and Forum Selection clause shall reimburse the prevailing party for its attorney fees and costs associated with defending against the challenge of said clause.
BEST 50KW High Frequency Induction Heater Furnace - 50KW High Frequency Induction Heating Machine. GP-50AB frequency induction machine saves the expenses for you. GP-50AB high frequency induction machine is simple to be installed and operated. Only by connecting corresponding water, the electricity and induction machine you can start shooting to use without need to preheat and waiting, the simple heating regulation knob will let you find result of heating quickly that you need, Anyone can operate it conveniently without training.
BEST 50KW High Frequency Induction Heater Furnace - 50KW High Frequency Induction Heating Machine. GP-50AB frequency induction machine saves the expenses for you. GP-50AB high frequency induction machine is simple to be installed and operated. Only by connecting corresponding water, the electricity and induction machine you can start shooting to use without need to preheat and waiting, the simple heating regulation knob will let you find result of heating quickly that you need, Anyone can operate it conveniently without training.
BEST 50KW High Frequency Induction Heater Furnace - 50KW High Frequency Induction Heating Machine. GP-50AB frequency induction machine saves the expenses for you. GP-50AB high frequency induction machine is simple to be installed and operated. Only by connecting corresponding water, the electricity and induction machine you can start shooting to use without need to preheat and waiting, the simple heating regulation knob will let you find result of heating quickly that you need, Anyone can operate it conveniently without training.
BEST 50KW High Frequency Induction Heater Furnace - 50KW High Frequency Induction Heating Machine. GP-50AB frequency induction machine saves the expenses for you. GP-50AB high frequency induction machine is simple to be installed and operated. Only by connecting corresponding water, the electricity and induction machine you can start shooting to use without need to preheat and waiting, the simple heating regulation knob will let you find result of heating quickly that you need, Anyone can operate it conveniently without training.
BEST 50KW High Frequency Induction Heater Furnace - 50KW High Frequency Induction Heating Machine. GP-50AB frequency induction machine saves the expenses for you. GP-50AB high frequency induction machine is simple to be installed and operated. Only by connecting corresponding water, the electricity and induction machine you can start shooting to use without need to preheat and waiting, the simple heating regulation knob will let you find result of heating quickly that you need, Anyone can operate it conveniently without training.
BEST 50KW High Frequency Induction Heater Furnace - 50KW High Frequency Induction Heating Machine. GP-50AB frequency induction machine saves the expenses for you. GP-50AB high frequency induction machine is simple to be installed and operated. Only by connecting corresponding water, the electricity and induction machine you can start shooting to use without need to preheat and waiting, the simple heating regulation knob will let you find result of heating quickly that you need, Anyone can operate it conveniently without training.
BEST 50KW High Frequency Induction Heater Furnace - 50KW High Frequency Induction Heating Machine. GP-50AB frequency induction machine saves the expenses for you. GP-50AB high frequency induction machine is simple to be installed and operated. Only by connecting corresponding water, the electricity and induction machine you can start shooting to use without need to preheat and waiting, the simple heating regulation knob will let you find result of heating quickly that you need, Anyone can operate it conveniently without training.
BEST 50KW High Frequency Induction Heater Furnace - 50KW High Frequency Induction Heating Machine. GP-50AB frequency induction machine saves the expenses for you. GP-50AB high frequency induction machine is simple to be installed and operated. Only by connecting corresponding water, the electricity and induction machine you can start shooting to use without need to preheat and waiting, the simple heating regulation knob will let you find result of heating quickly that you need, Anyone can operate it conveniently without training.
50KW High Frequency Induction Heater Furnace eh - 50KW High Frequency Induction Heating Machine. GP-50AB frequency induction machine saves the expenses for you. GP-50AB high frequency induction machine is simple to be installed and operated. Only by connecting corresponding water, the electricity and induction machine you can start shooting to use without need to preheat and waiting, the simple heating regulation knob will let you find result of heating quickly that you need, Anyone can operate it conveniently without training.
T183074 Sheldon Shel Lab CR1-2 Clean Room Oven 9071305 - The oven heated to an. The built-in door latch doesn't hold the door closed, so the door is prone to opening by itself. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Binder 9010-0175 UL Drying Oven - 17491 - Our Inventory # 17491. Binder 9010-0175 UL Programmable Drying Oven. Make: Binder. Is a Loading dock and/or forklift available?.
Lindberg/Blue M CC-09S-M-B-WAS 208v 60hz PH 1 OVEN 25x25x25 high temp 750f 400c - Lindberg/Blue M CC-09S-M-B-WAS 208-60- PH 1 OVEN 25x25x25 general signal. Internal dimensions 25inch x 25inch x 25in External dimensions 60x38x37in deep Temperature max 750f or 400c Used condition. Crated and ready to go. Door gasket seal appears worn. May ship freight for actual cost , to lower 48 only, please discuss shipping prior to purchase or local pickup required.
1200° Zirconia Sintering Porcelain Furnace Oven Automatic for Porcelain Drying - High-quality quartz tubes are used as the furnace chamber, and the resistance heating element is a high-quality resistance wire to ensure uniformity of heating and better results in baking porcelain. Fast heating speed, adjustable from 0-150℃/minute A high-quality oil-free vacuum pump with a multi-layer filter structure of a vacuum tube can ensure the stability and life of related parts. 10-inch large screen for easy operation. Suitable for universities, research institutes, and industrial and mining enterprises to do high-temperature sintering and metal annealing.
Atwood Machine - Atwood Machine atwood machine apparatus is attached with a rod havine two pulley on both ends. a base is also fitted with the rod to fix the apparatus on the wall, provided with two weights for balancing or unbalancing.
Vacuum Oven - Includes : Vacuum Oven, Attached Cord, Vacuum Gauge & Warranty. This Vacuum Oven has been fully tested, inspected and verified to be in great working condition. Vacuum Range Atmosphere to 10 microns (depending on pump selection).
220V 13.8*13.8in Digital Forced Air Convection Drying Oven Heat/Bake Adjust Fan - 220V 101-0AB Digital Forced Air Convection Drying Oven 1. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Carbolite PIF200 Fan Convection Lab Oven Incubator Drying Medical - This is aCarbolite Fan Convection Laboratory Oven Incubator. tested and running well! They are subject to withdrawal, change and prior sale without notice. All orders received are binding only when they have been accepted and acknowledged by us in writing.
VWR Hybridization Oven Boekel (230402V) - Hybridization Ovens are designed to provide rapid heat-up, excellent temperature stability, and efficient mixing for all types of hybridization and incubation applications. VWR® Two-Year Limited Parts and Labor Warranty.
Thermo Scientific Precision Laboratory Gravity Convention Oven Model 658 - All pictures shown above are of actual product(s) sold. Item(s) are sold-as-is as shown in pictures above. It was previously used at a local university,Unit powers on. Only includes what is shown in pictures below.
Lab-Line Imperial Iii Heat Oven Model # 3445M (#2473) - Powers up, heats up but only appears to heat to 45 degrees. Due to size and weight, sold as is. Let us know if you want to arrange your own freight or would like us to get you a quote. Most cords pictured are for testing purposes only.
Jeneric/Pentron Inc. Auto Press Plus Pressing Furnace - Pentron Laboratory Technologies - Auto Press Plus Pressing Furnace. 13 user programmable pressing programs. It has been checked over, tested, and verified to be in perfect working condition. Model: H76A.
Thermolyne Sybron CP-13310 Furnace Single Phase 1 Temperature Control SOLD AS IS - unable to test, sold as is, unaware if working or not, no returns accepted on this item, comes only as pictured, does have scuffs and scratches as well, unaware if repairable or not should it not work This unit is being sold as not working, it is untested, we cannot confirm the unit will work or any of its parts are able to be used in anyway, no returns will be accepted for this item, Sold as is without warranty. Since we do not open our items, we cannot guarantee that there is or is not any type of internal damage, or any missing parts that are essential.
Fisher Scientific 281A Isotemp Vacuum Oven Cat# 13-261-50 - Appears to be in good to fair external condition. Heats up but did not test at highest temp, unable to check vacuum. Or ask for freight quote. available with affordable mileage fee. Free local pickup.
T182593 Boekel Bambino Hybridization Oven Model 230300 - This unit has scuffs and scratches present especially on the chamber cover. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Fisher Scientific IsoTemp Vacuum Oven 285A - sold as is, unable to test, no returns accepted on this item, door does not close. Has scuffs and scratches as pictured as well. Unaware if repairable or not should it not work. This unit is being sold as not working, it is untested, we cannot confirm the unit will work or any of its parts are able to be used in anyway, no returns will be accepted for this item, Sold as is without warranty. Since we do not open our items, we cannot guarantee that there is or is not any type of internal damage, or any missing parts that are essential.
AMAT Applied Materials 0010-35511 P5000 Etch PID Controller Precision 5000 Spare - The Watlow unit is missing the face but the unit did power on and display functioned (see photos). The physical condition is good, but there are signs of previous use and handling. Removed from a AMAT Applied Materials Precision 5000 P5000 CVD Etcher System.
Fisher Isotemp 0V6600G Oven -Fully Tested And Calibrated - FISHER ISOTEMP OV600G LABORATORY OVEN - FULLY RECONDITIONED. This laboratory oven is gorgeous and in perfect working order. It is in tip-top shape. It has a temperature range of 40 to 220 degrees C.
2500W Manual Electric Dental Burnout Furnace with Refractory Bricks - Max 1000℃ - The AX-2.5-10 Burnout Furnace has all the basic functions. It features low maintenance and low price. AX-4-2.5 Burnout Furnace (Manual). This unit is used for the wax elimination of casting rings and preheating the crucible in dental laboratory.
Enhenced Intelligent Dental Burnout Furnaces for Denture Sintering - Max 1200℃ - This machine is used in dentistry, it is updated from traditional burnout furnaces. The case of this burnout furnace is made of thin bent and welded steel sheets. The inside of the furnace is a complete whole and it is made of high-alumina refractory materials.
Despatch Model Leb-1-20 Laboratory Oven Sold As Is Read Description - Condition: For parts or not working sold as is, unable to test, handle is broken so it does not close or stay in place. SOLD AS IS, no returns accepted on this item. Unaware if working or not. This unit is being sold as not working, it is untested, we cannot confirm the unit will work or any of its parts are able to be used in anyway, no returns will be accepted for this item, Sold as is without warranty. Since we do not open our items, we cannot guarantee that there is or is not any type of internal damage, or any missing parts that are essential. .
Barnstead International / Lab-Line Vacuum Oven 3618P - Here is a Barnstead International / Lab-Line Vacuum Oven 3618P. This item is being sold for parts as is due to some damage to the control panel and siding that happened during transit. Other than that the item is in good overall condition.
Thelco Precision 2.5 cu. ft Laboratory Oven - It is ideal for general laboratory use. ft. (70.8L). Temperature Range: 65° to 210°C. Exterior L x W x H ( 3): 21x24x26 in. (54x61x66cm) Includes door thickness; does not include handle. Chamber D x W x H: 18.5x15.25x15.25 in.
Shel Lab Oven CE5G TESTED with warranty SEE Video - Shel Lab Oven CE5G ID 15464. The Shel Lab Oven CE5G provides gentle, efficient heating for delicate samples such as powders, films, and granular materials. This gravity convection lab oven is ideal for applications such as batch testing, aging tests, sterilizing, preheating process, components processing, stability testing, glassware drying, and electronic burning applications.
T182398 Blue M IGF-146B Mechanical Convection Oven 343ºC Max - I was able to power on this unit and it began heating as shown. This unit has scuffs and scratches present, as well as staining. 95020 (408)886-3700. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
BLUE M High Temperature Clean Room Oven 250°C DCC-206B (6/22) - Stainless Steel clean room high temperature oven. Item: BLUE M Oven. - Temperature Range: to 482°F(to 250.0°C). Model Number:DCC-206B Serial Number: U19F-307143-VF. Local pickup is available in San Diego.
Sheldon Laboratory / VWR 1370GM Microprocessor Control Gravity Convection Oven - Model: 1370GM. 3D Printers Air Compressors Air Cooling & Heating Equip. Benders Boring Mills Broaches Chemical & Processing Equip. We also reserve the right to correct any stenographic errors. Napco 5861 24 x 18 x 18 Vacuum Oven with Busch Pump.
Lunaire CE205 Industrial Chamber Oven - Heat Up Issues - This unit has been tested, and we set the oven to 300C, but unit was able to only go up to 246C and it would just stay on 246C. Cosmetically in fair/poor condition showing moderate to heavier scuffs / scratches / blemishes from previous use. Includes Chamber Oven and 2x Rail Racks as pictured. No additional items or accessories are included. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have. .
Lunaire CE205 Industrial Chamber Oven - Tested working and is guaranteed functional. We set the oven to 300 C but unit was able to go up to 294 C. Cosmetically in fair condition showing moderate to heavier scuffs / scratches / blemishes from previous use. Paint is starting to come out. Includes Chamber Oven, and 2x Rail Racks as pictured. No additional items or accessories are included. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have. .
Lab Furnace 0.9 Cu Ft Vacuum Drying Oven Digital 5-Side Heating 5 Shelves 110V - Feature1: (1)Heat treatment of combustible and explosive solvents (2)Specially for the drying of lacquers and other coating materials (3)Square design, make full use of space, more economic, affordable (4)Natural convection and forced air circulation (5)High quality materials Feature2: Equipped with high performance MCU-based temperature controller with advanced PID algorithm to maintain temperature uniformity (+/- 1°F) from low temperature to 480°F (250°C). Vacuum drying oven with large LCD screen display, able to show multi-group data. Menu-style user interface, easy to understand and operate. Vacuum drying oven has adjustable tightness door. Integrated forming silicone rubber door gasket maintains constant vacuum level even for long-term operation. The toughened double glass door can.
101-2AB Digital Forced Air Convection Drying Oven,110V, 2000W,Up to 300 Degree C - Digital Forced Air Convection Drying Oven. 101-2AB Digital Forced Air Convection Drying Oven. Tem.range RT+10-250℃(the highest 300℃). Exterior size (D×W×H). Large double layer toughened glass window is convenient to observe the changes of contents in the box. ).
Mellen Microtherm Box Furnace Mtb12-8X8X8-1Z Volts: 208 Temp Range1200 Deg. C. - BRICK 6” X 6” X 2”. TEMPERATURE RANGE: 0-1200 DEG. IT IS DESIGNED FOR HORIZONTAL ORIENTATION AND HAS AN AIR-COOLED DOUBLE-WALL SHELL TO PROVIDE A COOLER EXTERIOR. THE FURNACE HAS A DOUBLE-PIVOTING INSULATED DOOR TO KEEP THE HOT FACE SAFELY AWAY FROM THE OPERATOR, AND A DOOR INTERLOCK SWITCH TO INTERRUPT POWER TO THE FURNACE WHEN OPEN.
Biometra Compact Line OV4 052-490 Hybridisation Oven w/Adjustable Rotor - Ability to stop the rotor in any position. 4 different rotor speeds. This device has been tested to power on. Efficient heating system with a powerful circulating fan eliminates the need for preheating the furnace.
Carbolite RHF 1600 Laboratory High Temperature Furnace Oven - Carbolite RHF 1600 Laboratory High Temperature Furnace OvenShipping cost covers only the 48 continental states, for the rest of the locations please contact us prior to placing your orderSTK# 30
15KW High Frequency Induction Heater Furnace Quenching Melting Furnace Iron Weld - Output power: 15kw. Fluctuating Frequency : 30-100KHZ. the flow rate of cooling water :0.06-0.12Mpa 7.5L/min. The integrated filter capacitor is used after the technology upgrade, the performance is more stable, the power output is larger, and the fault caused by the manual plug-in is effectively reduced.
4x4x6 Electric Powder Coating Batch Oven - 4x4x6 Electric Batch Oven. G 90 Galvanized Sheeting inside and out. Available as Electric as well. 12 Gauge plate steel flooring.
Paragon Industries TNF11-52 Electric Kiln 2300 Def F - Max temp: 2300 Deg F. 48.0000 x40.0000 x48.0000. Reference Number. Signals & Source Generators. inside dims: 22 In Diam x 29 In Ht. 208 V, 1 PH 60 A. This item powers on but we are unable to confirm functionality.
Dental Holding Furnace Ceramic Firing Pegs Pges Porcelain Oven Tray 8 Types - Ceramic firing pegs are used for holding crowns and bridges in a porcelain furnace. 8 Types for choice. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Dental Ceramic Lab Firing Pegs Pges Porcelain Oven Tray Holding Bicuspid 5 Pcs - 5 Pcs Ceramic Firing Pegs Dental Lab for Porcelain Oven Tray. Ceramic firing pegs are used for holding crowns and bridges in a porcelain furnace. 5 Pcs Bicuspids Type Ceramic Firing Pegs. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
OSI Thermosi SR 1000 oven Model EBV 55 - Model EBV 55, serial # 91/5060, 55L cap, 220 volt 1 phase 200 watt, 19" W by 13" D by 13" H chamber. Inspections available at Morgan Hill, CA 95037. Doubles may require the driver to unhook 1 trailer.
Blue M model OV-472A-2 oven - Inspections available at Morgan Hill, CA 95037. Serial # LT-700, 120 volt single phase 1/6 hp motor draws 4 amp, 120 volt heater is 1 KW, 12" D by 12" W by 12" H chamber. Doubles may require the driver to unhook 1 trailer.
Sybron Thermolyne F-D1525M type 1500 Lab Muffle Furnace (212-2192 F) - AS-IS, WHERE-IS?. This item may be missing necessary hardware / manuals / inserts/ power cords/ box covers/ accessories/ remotes/ wrenches/ chucks/ keys/ warranty cards/ bar codes/etc. Doubles may require the driver to unhook 1 trailer.
UVP HL-2000 Hybrilinker Oven W/ UV Crosslinker - Tested working and is guaranteed functional. Cosmetically in good condition showing minor scuffs / scratches / blemishes from previous use. Plastic covering on the UV crosslinker has been taped on Includes UV Crosslinker as pictured. No additional items or accessories are included. Unless pictured, no power adapter / power cable included Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have. .
USED (1) Zirconia Sintering Furnace, Shenpaz Sintra 1650 + TEST RESULTS - 2 sintering firing table (no). furnace gets very hot, MUST be put on a non-combustible surface. furnace runs on a normal, 120 volt, 15 amp line but it should be the only item plugged into the line. at 1,500 C the platform support was hot to the touch, the rest of the furnace was only warm to the touch.
Lab 0.9 Cu Ft 12x12x11" Vacuum Drying Oven Digital 5-Side Heating 7 Shelves 110V - Voltage:110V 60HZ,Input Power:800W Stainless steel working chamber. Air convection oven made of high-quality cold-rolled steel with electrostatic spray on surface;Easy-to-clean and heavy-duty electropolished vacuum chamber, Rectangular chamber, ensuring maximum sufficient volume Vacuum drying oven uses microcomputer temperature controller, High-performance MCU-based temperature controller with advanced PID algorithm to maintain temperature uniformity (+/- 1 °F) from low temperature to 480 °F (ca. 249 °C). Large LCD screen display, able to show multi-group data. The menu-style user interface, easy to understand and operate.Force adjustable door handle and one-piece door sealing gasket maintain consistent vacuum level.
Lindberg Tube Furnace, Mass Flow Remote Electronic Units Re- 01 & D6 Meters - LINDBERG TUBE FURNACE, MASS FLOW REMOTE ELECTRONIC UNITS RE- 01 & D6 METERSTube furnace model 55122S/N 919009 120 V1330 watts Max temp 1200CMass flow sensor H006S100(2) Micro Motion mass flow meters model D6(2) Mass flow remote electronic units RE-01Shipping cost covers only the 48 continental states, for the rest of the locations please contact us prior to placing your order.STK# (T)
Lab 1.9 CuFt 16x16x13" Vacuum Drying Oven Digital 5-Side Heating 10 Shelves 110V - Voltage:110V 60HZ,Input Power:1400W Stainless steel working chamber. Air convection oven made of high-quality cold-rolled steel with electrostatic spray on surface;Easy-to-clean and heavy-duty electropolished vacuum chamber, Rectangular chamber, ensuring maximum sufficient volume Vacuum drying oven uses microcomputer temperature controller, High-performance MCU-based temperature controller with advanced PID algorithm to maintain temperature uniformity (+/- 1 °F) from low temperature to 480 °F (ca. 249 °C). Large LCD screen display, able to show multi-group data. The menu-style user interface, easy to understand and operate.Force adjustable door handle and one-piece door sealing gasket maintain consistent vacuum level.
T181840 Shanghai Espec LC-213 Blast Drying Oven Chamber 230V 50Hz - The top right vent spins easily enough to potentially be knocked. Is there a Dock or Forklift available?. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Lab 27L Muffle Furnace Heat Treatment Melting Oven PID Control MoSi2 1700℃ 220V - The high-temperature box furnace integrates the control system and the furnace chamber into a whole, with a compact and beautiful structure. The furnace lining is made of vacuum-formed high-purity alumina poly-light material, which has low heat storage, good heat preservation and energy saving effect, and reduces the overall weight of the electric furnace. The furnace shell adopts a double-layer air-cooled structure to ensure that the surface temperature of the furnace shell is close to room temperature. The temperature control system adopts an industrial precision 0.2-level intelligent instrument, PID control, 51-segment programmable heating curve, and a high degree of automation. This series of electric furnaces are widely used in the laboratories of universities, scientific research ins.
Cole Parmer 03405-20 StableTemp Digital Hot Plate - Used, fair to good condition. Powers on and heats up. The aluminum plate is stained (see pictures) and it is missing the feet. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
LINDBERG BLUE M 1cuFt/28.3Liter/260°C GRAVITY CONVECTION INCUBATOR OVEN FREESHIP - (Ft/28.3Liter/260°C) GRAVITY CONVECTION LAB INCUBATOR as can be seen in the pictures. Lindberg Blue M Gravity Convection Oven, 1 cu.ft., G01300A (P/N 9071025), +40°C to 260°C, 120VAC. With a capacity of 1.0 cu.ft., the Blue M gravity convection oven, GO1300A, P/N 9071025, is a compact benchtop model.
INTSUPERMAI 1KW Digital Forced Air Convection Drying Oven W/7.8"*9.8" Window - INTSUPERMAI ®. 110V101-0AB Digital Forced Air Convection Drying Oven (160143). 【Application】This device is used for drying and heating processes through hot aircirculation system at laboratories in enterprises,schools and scientific institutions.
SHIP NOW!!! Shel Lab / Shellab SMO14-2 Oven / 14 cf / 260°C 4 month wrty - ShelLab SMO14-2 14 Cubic Foot Oven. The SHEL LAB SMO14-2 features 14 cubic feet of economical oven space. These SHEL LAB Ovens Feature SHEL LAB Forced Air Oven,13. 7 Cu. Ft. (387 L) 220 V. Ambient + 15°C to 260°C.
Double Heating Dental Vacuum Furnace Oven for Ceramic Zirconia/Glazing Sintering - There is no need to preheat the sintering furnace in advance. Up to 8-20 restorations (60mm tray) can be sintered. Fast sintering zirconia with full anatomical morphology. The maximum temperature can be set to 1530 ℃, fast glazing is finished in 9 minutes.
21.6"x21.6" Lab Furnace Drying Oven Cabinet Forced Air Convection Digital Panel - Digital Forced Air Convection Drying Oven 21.6" x 21.6". 101-2AB Digital Forced Air Convection Drying Oven. The shell is made of high quality cold-rolled steel plate, surface electrostatic spraying. Large double layer toughened glass window is convenient to observe the changes of contents in the box.
Jelenko Jelcraft Auto-Glazer - Jelenko Jelcraft Auto-Glazer. Used in a dentist's office until retirement in 2019. Was in perfect working order when packed away. Sold as-is..
Lucifer RD7-KHE24 Bench-Style Box Furnace 2200* F Max Temp 7 kW Power - Red Devil Series box furnaces can be fitted with optional accessories, including an over temperature safety system, gas spring vertical lift door and a base stand. An all-purpose general bench unit, Lucifer’s RD7 series can be purposed to various heat treating operations including hardening, drawing, tempering or annealing of steel.
Electric Digital Forced Air Convection Drying Oven 110V 1KW Adjust Fan US Stock! - 101-0AB Digital Forced Air Convection Drying Oven. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Electric Drying Oven Forced Air Convection Drying Oven Adjustable Temperature - Digital Forced Air Convection Drying Oven. 101-0AB Digital Forced Air Convection Drying Oven. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Napco Precision Scientific Vacuum Oven, Model 5831 - Model 5831. Napco Precision Scientific. Vacuum Range: 1 atmosphere to 10 microns(1.3Pa) absolute pressure, with adequate pump. Vacuum Oven. Stainless-steel interior, 1/2" thick (13mm) tempered glass window provides excellent visibility.
Thermo Scientific Gravity Oven; 1.7 cu ft, PR305220G - Thermo Scientific PR305220G Compact Gravity Oven; 1.7 cu foot. Compact Ovens are ideal for basic drying and baking applications with a temperature range of ambient +5 to 210°C. The small footprint conserves valuable bench top space or may be placed under laboratory counters.
TECHTONGDA 13.78"*13.4"*13.78" Lab Digital Forced Air Convection Drying Oven110V - TECHTONGDA®. 13.78" 13.4" 13.78" Lab Digital Forced Air Convection Drying Oven 110V. 110V Adjust Speed Fan 13.78" 13.4" 13.78" Lab Digital Forced Air Convection Drying Oven. Large double layer toughened glass window is convenient to observe the changes of contents in the box.
21.6" x 21.6" Forced Air Convection Drying Oven Cabinet Digital Panel 2000W - Digital Forced Air Convection Drying Oven. 101-2AB Digital Forced Air Convection Drying Oven. The shell is made of high quality cold-rolled steel plate, surface electrostatic spraying. Large double layer toughened glass window is convenient to observe the changes of contents in the box.
INTSUPERMAI Digital Forced Air Convection Drying Oven Powerful Lab Dryed Oven - INTSUPERMAI ®. 110V101-2AB Digital Forced Air Convection Drying Oven (160144). The opening door of the machine is equipped with a handle, which is convenient for opening the door. The tightness of the door handle can be adjusted, which is easy to use, more stable in closing, and better in sealing.
110V 2KW Lab Digital Forced Air Convection Drying Oven 17.32*21.6*21.6In 101-2AB - Large double layer toughened glass window is convenient to observe the changes of contents in the box. Exterior size (D×W×H). Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
110V Industrial Lab Digital Forced Air Convection Drying Oven w/ View Window - Large double layer toughened glass window is convenient to observe the changes of contents in the box. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
13.7" Digital Forced Air Convection Drying Oven electrothermal blowing dry box - 101-0AB Digital Forced Air Convection Drying Oven. Large double layer toughened glass window is convenient to observe the changes of contents in the box. The device is equipped with an independent fan switch that can be turn on or off as needed.
TECHTONGDA 101-2AB Digital Forced Air Convection Drying Oven Lab Equipment 110V - TECHTONGDA®. Large double layer toughened glass window is convenient to observe the changes of contents in the box. Exterior size (D×W×H). Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
110V 1KW Digital Forced Air Convection Drying Oven Adjust Speed Fan Inner 13.78" - 101-0AB Digital Forced Air Convection Drying Oven. 1 Set 101-0AB Digital Forced Air Convection Drying Oven. A is galvanized steel inner chamber, AB is stainless steel inner chamber. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
110V Digital Forced Air Convection Laboratory Drying Oven w/ Temperature Control - This product is equipped with a speed regulator, which can be adjusted to 3 gears. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Despatch Oven LCC1-51-3 TESTED with Warranty SEE VIDEO - The Despatch Oven LCC1-51-3 brings users a stackable lab oven with HEPA filtration to provide a constant flow of 99.97% clean air to the product being heated. Up to 3 lab ovens can be connected to operate in tandem through a Modbus communication option, to maximize the productivity of the footprint.
ivoclar vivadent programat - Optimised shrinkage behaviour giving high stability during the firing of the materials.
Nuaire Dh Autoflow Laboratory Incubator -Fully Tested And Calibrated - NUAIRE DH AUTOFLOW LABORATORY INCUBATOR (MODEL NO. NU-5500- FULLY RECONDITIONED. This laboratory incubator is gorgeous and in perfect working order. It is in tip-top shape. This laboratory incubator has three levels and two doors (internal glass door). ).
TESTED Marshall Varian Scientific 1013 2000 Deg. F 110v Furnace 760 KVA 1 Phase - TESTED Marshall Scientific 1013 2000 Deg. F 110v Furnace 760 KVA 1 Phase. Varian brand. In good condition. Resistive wire is all in functioning condition. Used. What is pictured is included. Has 6 shunts for even multi-zone heating. 1-1/2" Inner chamber diameter. Inner length is about 11".
Hybaid Micro-4 HB-MCR4 Hybridization Oven HBMCR4110 *Tested* - Unless otherwise stated, this has been tested for key functionality. By purchasing this product, you are confirming that it will be used for its originally intended purpose. This has been tested and it is in good working order.
Thermolyne Fb1415M Furnace - Small size, 16"x9"x9" Set temperature to 700, got up to temperature in about 15 minutes.
ST. JOHN ASSOCIATES Bio-Oven III Bio-Therm / 30-202 - The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. There’s no other parts, manuals, software include. Other Notes of Interest.
15KW 1500° High Frequency Induction Heating Melting Furnace Machine Welding - 1 x 15KW 1500° High Frequency Induction Heating furnace Machine. With 100%load design, can work in 24 hours without stop. Induction Heating Power:15KW. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
SHENPAZ SINTRA PRO 90ZR SINTERING FURNACE ***read*** - SHENPAZ SINTRA PRO 90ZR ULTRA FAST SINTERING FURNACE. Shenpaz Sintra Pro. SINTRA PRO/90zr & SINTRA PRO/120zrf are at the forefront of the rapid evolution of sintering zirconia. SINTRA PRO/90zr tested and validated fast 90 minutes with specific ZrO2 materials.
Furnace Control Panel Heating Driver Board For Lab Furnace - Furnace Control Panel Heating Driver Board For Lab Furnace. Panel was removed from a fully functional lab over . Shenpaz industries heating driver board. Free shipping and returns. Broken plastic around main multi pin connector
Furnace Control Panel Heating Driver Board For Lab Furnace - Furnace Control Panel Heating Driver Board For Lab Furnace. Panel was removed from a fully functional lab over . Shenpaz industries heating driver board. Free shipping and returns.
220V Digital Forced Air Convection Lab Drying Oven w/ Temperature Controller - 1 220V 101-2AB Digital Forced Air Convection Drying Oven (160170). Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Blue M DCC-256C Clean Room Oven 250°C / 482°F 20" x 22" x 20" - The unit has also been tested in our facility and found to be in good working condition. If the item is listed as working, then it was tested to the best of our ability. WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING PRODUCTS AND SERVICE.
LAB-LINE IMPERIAL IV ULTRA CLEAN MICROPROCESSOR OVEN p/n 3481M (#3624) - For us to check rates, we need the following info: 1. Powers up! We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided.
THERMO BF51828C-1 Box Furnace 1100C Modaltherm RS485 - Capacity: 42.5L (1.5cu ft). Temperature Range: 100 to 1100°C. Display: LED actual vs. setpoint (in °C or °F). Power Consumption: 5600w. Certifications: UL. Warranty: 12 Month. Thermo Scientific® ELED #: BF51828C-1.
Despatch / Wakefield Special Dual Chamber 27" x 24" x 24" 6kW, 260°C - The unit has also been tested in our facility and found to be in good working condition. WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING PRODUCTS AND SERVICE. If the item is listed as working, then it was tested to the best of our ability.
Blue M CR07-256CX Clean Room Oven 50°C to 250°C 20" x 21 1/2" x 20" - The unit has also been tested in our facility and found to be in good working condition. If the item is listed as working, then it was tested to the best of our ability. Unless a resale certificate is provided.
Lab Muffle Furnace Science MoSi2 Heating Equipment Integrated PID Control 27L US - Product Introduction The high-temperature box furnace integrates the control system and the furnace chamber into a whole, with a compact and beautiful structure. The furnace lining is made of vacuum-formed high-purity alumina poly-light material, which has low heat storage, good heat preservation and energy saving effect, and reduces the overall weight of the electric furnace. The furnace shell adopts a double-layer air-cooled structure to ensure that the surface temperature of the furnace shell is close to room temperature. The temperature control system adopts an industrial precision 0.2-level intelligent instrument, PID control, 51-segment programmable heating curve, and a high degree of automation. This series of electric furnaces are widely used in the laboratories of universities, s.
27L Muffle Furnace for Heat Treatment Melting Oven 1700℃ 30*30*30cm Chamber 220V - Maximum energy efficiency is achieved by surrounding the chamber with thermal-efficient alumina fiber ceramic insulation High quality MoSi2 heating elements for fast and uniform heating. Heavy duty double layer structure with cooling fan. Lower temperature outside case. B type thermocouple installed for immediate use PID automatic control via current limiting phase angle fired the resistor. The high-temperature box furnace integrates the control system and the furnace chamber into a whole, with a compact and beautiful structure. The furnace lining is made of vacuum-formed high-purity alumina poly-light material, which has low heat storage, good heat preservation and energy saving effect, and reduces the overall weight of the electric furnace. The furnace shell adopts a double .
Despatch / Wakefield PBC2-16 Burn In Oven 210°C w/ Wakefield Equipment Rack - The unit has also been tested in our facility and found to be in good working condition. If the item is listed as working, then it was tested to the best of our ability. WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING PRODUCTS AND SERVICE.
Blue M STF54233C Tube Furnace w/ CC58125C Controller 208/240V *Parts/Repair* - It powers on and then displays "0r". It has scuff marks, scratches, and general wear from use. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Despatch / Wakefield PBC1-80 Burn In Oven 210°C, 60 HZ, 26" x 25" x 24" - Despatch PBC1-80 Burn In Oven 210°C, 60 HZ, 26" x 25" x 24". The unit has also been tested in our facility and found to be in good working condition. WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING PRODUCTS AND SERVICE.
Despatch / Wakefield PBC1-80 Burn In Oven 210°C, 60 HZ, 26" x 25" x 24" - Despatch PBC1-80 Burn In Oven 210°C, 60 HZ, 26" x 25" x 24". The unit has also been tested in our facility and found to be in good working condition. WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING PRODUCTS AND SERVICE.
Automatic Dental Lab Porcelain Oven Ceramic Furnace with Vacuum Pump - 1600W - Porcelain Furnace is suitable for all kinds of porcelain powder on the market, such as IVOCLAR, VITA, NORITAKE, etc. Long service life, low-noise, oil-free vacuum pump, don’t need to maintain;. Unique vacuum pipeline filtration design improves the service life of internal components;.
Despatch / Wakefield PBC1-80 Burn In Oven 210°C, 60 HZ, 26" x 25" x 24" - Despatch PBC1-80 Burn In Oven 210°C, 60 HZ, 26" x 25" x 24". The unit has also been tested in our facility and found to be in good working condition. WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING PRODUCTS AND SERVICE.
^^ United Electric Model D972J39 Range 0-1000F -15 To +535C (Nw50) - We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is atta.
Despatch LAC1-67-2 Burn In Oven 260°C / 500°F on Stand 21" x 24" x 24" - The unit has also been tested in our facility and found to be in good working condition. If the item is listed as working, then it was tested to the best of our ability. WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING PRODUCTS AND SERVICE.
Labnet Hybaid Laboratory Benchtop Rotisserie Incubator Oven - Labnet Hybaid Laboratory Benchtop Rotisserie Incubator Oven. Good working condition. Unit comes from a working environment. Unit powered on and tested to be functional as shown here in photos. Unit comes exactly as shown here in photos. FREE SHIPPING across the US.
TPS LO-27-P Convection Lab Oven Temp Limit +260 Degrees Celsius - Tested working and is guaranteed functional. Cosmetically in good condition showing minor scuffs / scratches / blemishes from previous use. Includes Lab Oven as pictured. No additional items or accessories are included. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have. .
Induction Heater, FOR PARTS, 10kW, SP-15/S, 999-31501, Ameritherm - We powered up the machine without a pendant,heat station or coil connected and the ready light flashed with code 57.4 flashing on display. This was the extent of the testing. Unit appears in fair physical condition but is being sold AS-IS with only what is shown.
Quartz Infrared, Panel Heater, Research Inc, 16x12", 9K to 19K watts - Used Quartz Infrared heater panel on stand. Total heated panel area is 12 x 16". Heater can be positioned over a conveyor belt for inline process heating. Highly adjustable, heavy-duty mounting brackets.
Despatch LCC1-54N-2 Clean Room Oven 500°F 240V - Type: Clean Room Oven. The oven is exactly as pictured. Electrical: 240V, 1 Ph, 60 HZ. Clean Room Class: 100. Max Temperature: 500°F (260°C).
Despatch LAC1-38B-7 Burn-In Oven 260°C / 500°F on Stand 18" x 18" x 18" - The unit has also been tested in our facility and found to be in good working condition. If the item is listed as working, then it was tested to the best of our ability. WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING PRODUCTS AND SERVICE.
Despatch LAC1-38B-7 Burn-In Oven 260°C / 500°F on Stand 18" x 18" x 18" - The unit has also been tested in our facility and found to be in good working condition. If the item is listed as working, then it was tested to the best of our ability. WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING PRODUCTS AND SERVICE.
Despatch LAC1-38B-7 Burn-In Oven 260°C / 500°F on Stand 18" x 18" x 18" - The unit has also been tested in our facility and found to be in good working condition. If the item is listed as working, then it was tested to the best of our ability. WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING PRODUCTS AND SERVICE.
Despatch LAC1-38B-7 Burn-In Oven 260°C / 500°F on Stand 18" x 18" x 18" - The unit has also been tested in our facility and found to be in good working condition. If the item is listed as working, then it was tested to the best of our ability. WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING PRODUCTS AND SERVICE.
Powered Heat Treatment Equipment 220V Digital Forced Air Convection Drying Oven - 220V 101-2AB Digital Forced Air Convection Drying Oven. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Blue M CR07-256C Clean Room Oven 50°C to 250°C - The unit has also been tested in our facility and found to be in good working condition. If the item is listed as working, then it was tested to the best of our ability. Unless a resale certificate is provided.
Vita Vacumat 40T Dental Porcelain Oven Dental Lab oven-AS/IS - Info: Actual Picture of the Item Provided, What You See in the Picture(s), is What You get. Info: what you see in the pictures, is what you get. No more accessories, cable,software,vacuum pum.
Hybaid Micro-4 HB-MCR4 Hybridization Oven - Baton Rouge, Louisiana. Drago's Antiques LLC. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Bellco Glass Autoblot Micro Hybridization Oven ! (293668) - ((InvIDs))293668(((InvIDs))). You will get nothing more or less. • For the power cord, if you can see a separate picture of power cord then you'll get it otherwise we used power cord to test the item.
Best Value Vacs 1.9 cu ft ECO Vacuum Drying Oven V0-16050 w/HVAC Hose - For degassing and purging light hydrocarbon solvents, the ECO Vacuum Oven is an efficient option. Purpose-built with the best materials, this vacuum oven is a no-brainer for anyone looking for an indispensable tool in making the highest quality extracts.
Fisher Scientific Isotemp Vacuum Oven Model- 282A - Used, in good cosmetic condition with some scuffs and scratches from normal use and storage. We have tested this oven to power up and heat up only as we do not have a vacuum pump to fully test. We are very confident that this is a fully functional vacuum oven that will operate as expected. We completely replaced the power cord because the original was completely torn up. The digital display is bright and in great condition. All the knobs and buttons work great and are responsive. Unfortunately we do not have any manuals or accessories for this oven. There is 2 racks that are included in this listing.
DigiVac Vapor Pressure Controller - It can also be used to prevent bumping by gradually changing the pressure. The vacuum regulator is particularly useful when you are looking to maintain pressure at a certain level as needed for botanical processing and rotary evaporation or ideal for any vacuum process that involves vapors.
Grant Boekel HIR12 Hybridization Oven Hybridisierungsofen - Temperature adjustable up to 99°C Temperature deviation up to 4°C rotatable sample carrier (for up to 10 samples) Dimensions: 440mm x 400mm x 44mm (H x W x D) digital temperature display Push button for temperature setting is missing (can still be operated)good, little used condition,.
Upgraded Dental Vacuum Zirconia/Glazing Sintering Porcelain Furnace - PHOENIX-9C - There is no need to preheat the sintering furnace in advance. Up to 8-20 restorations (60mm tray) can be sintered. Fast sintering zirconia with full anatomical morphology. • 1 PHOENIX 9C furnace. The maximum temperature can be set to 1530 ℃, fast glazing is finished in 9 minutes.
Digital Forced Air Convection Drying Oven Electrothermal blowing dry box 22"x33" - 220V Digital Forced Air Convection Drying Oven. Large double layer toughened glass window is convenient to observe the changes of contents in the box. The device is equipped with an independent fan switch that can be turn on or off as needed.
Electric thermostatic drying oven Temperature Adjustable Two Layer 50-480℉ - 220V Digital Forced Air Convection Drying Oven. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Hybaid HS9360 Hybridization Oven - Tested working and is guaranteed functional. Cosmetically in good condition showing minor scuffs / scratches / blemishes from previous use. Includes Hybridization Oven as pictured. No additional items or accessories are included. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have. Thank you for checking out our listing. .
Digital Forced Air Convection Drying Oven Electrothermal Blowing Dry Box 220V - 220V Digital Forced Air Convection Drying Oven. Large double layer toughened glass window is convenient to observe the changes of contents in the box. The device is equipped with an independent fan switch that can be turn on or off as needed.
15KW High Frequency Induction Heater Furnace Quenching Furnace Treatment Forging - Model: 15kw. output power: 15kw. Fluctuating Frequency : 30-100KHZ. the flow rate of cooling water :0.06-0.12Mpa 7.5L/min. The integrated filter capacitor is used after the technology upgrade, the performance is more stable, the power output is larger, and the fault caused by the manual plug-in is effectively reduced.
Shel Lab 1370GX General Purpose Gravity/Natural Convection Oven 5CFT, 40-250°C - Model # : 1370GX. Chamber Capacity: 5CFT. Shel Lab General Purpose Gravity/Natural Convection Oven. Temperature Range: 40-250°C. Full size truck access and forklift is acceptable. The Original Manufacturer's warranty does not apply.
Thermo Hera-Therm Lab Incubator / Oven (#3594) - For us to check rates, we need the following info: 1. We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided.
220V Lab Digital Forced Air Convection Drying Ove with Temperature Controller - 220V Digital Forced Air Convection Drying Oven. 220V 101-2AB Digital Forced Air Convection Drying Oven. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Easy Operate 220VDigital Forced Air Convection Drying Oven Baking Heat Treatment - 220V 101-2AB Digital Forced Air Convection Drying Oven. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Quincy Lab Model 30 Gc Electric Laboratory Oven - (THIS SALE IS FOR 1-) QUINCY LAB MODEL 30 GC ELECTRIC LABORATORY OVEN. • The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Heat Treatment Equipment 220V 2KW Digital Forced Air Convection Drying Oven New - 220V 101-2AB Digital Forced Air Convection Drying Oven. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Stovall 640 (H01011106) Genechip Hybridization Oven - Model: 640 (H01011106). Genechip Hybridization Oven. Genechip Hybridization Oven, ID: 14"x8.75"x10", 115V. Genechip Hybridization Oven. An ergonomic front-panel display contains system status indicators and buttons for adjusting the set point temperature and the rotisserie speed.
Fisher Scientific Isotemp Oven with Warranty SEE VIDEO - This gravity convection oven features adjustable shelves, a wide swinging door for unobstructed use, and a smooth corrosion-resistant stainless interior. Fisher Scientific Isotemp Oven with Warranty ID 14597-14560.
Updated Industry Lab Digital Forced Air Convection Drying Oven 101-2AB 220V 2KW - 220V 101-2AB Digital Forced Air Convection Drying Oven. Large double layer toughened glass window is convenient to observe the changes of contents in the box. Exterior size (D×W×H). Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Digital Muffle Furnace Made Of Kanthal Wire Useful For Ashing 225x100x100mm - (A) 225x100x100mm (9”X4”X4”). Maximum Temp. 900 Degree C With Working Temp. Muffle Furnace Outer Body Is Made Of Thick Mild Steel Sheet. Special High Temperature Alloy Wounded On The Outer Surface Of Working Chamber To Work On 220/110volt.
digital muffle furnace 225x100x100mm - (A) 225x100x100mm (9”X4”X4”). Maximum Temp. 900 Degree C With Working Temp. • Out Side Body Made Up Of Heavy Gauge G.I. Duly Powder Coated Inner Muffle With High Temp. Insulating Material. Muffle Furnace Outer Body Is Made Of Thick Mild Steel Sheet.
Rectangular Muffle Furnace 9x4x4 Maximum Temp. 900 Degree C With Working Temp - Rectangular Muffle Furnace 9x4x4. Digital Muffle furnace is Outer shell made out of thick. Maximum Temp. 900 Degree C With Working Temp. The product images shown are for illustration purposes only and may not be an exact representation of the product.
Thermel heater, 425W, 110V Hot Plate w/ control, 4" Dia. Lab distillation 957A - Thermel heater, 425W, 110V Hot Plate w/ control, 4" Dia. Lab distillation 957A. This appears to be New Old Stock in original box. Replacement 4" heater plate with mechanical temp control. Thia was a spare part for a distillation heater in a lab. Tgus is untested but appears to be in new condition. Sold as is, no warranty or returns. Box has writing on end: 18-6542-01
Global Vac Brand Commercial Grade Vacuum Pump - Global Vac. Maximum Vacuum ( in "HG) 29.63 ". specs believed to be: capacity / pump System: 10.6. Model: GPR-14. motor type: D80 by 4 P. motor number: 282201129. delta: 190-255 / 190/290V 6,0/6,0 A. 50/60 Hz: 0,75/ 0,90KW.
Harvest Pro Commercial Vacuum Oven - Harvest Pro Vacuum Ovens are designed from the ground up for botanical extraction purposes. Other products on the market have been simply adapted from existing industrial and lab uses. Our ovens warm to set temperature within 15 minutes (at ambient temperature) and do not overshoot set temperature.
TECHTONGDA 110V 1.9 Cu Ft Digital Vacuum Drying Oven for Laboratory etc. - 110V 1.9 Cu Ft Digital Vacuum Drying Oven. This device is used for drying and heating processes under vacuum conditions at laboratories in enterprises, schools and scientific institutions. a. Drying temperature can be lowered.
Fisher Isotemp 0V6600G Oven -Fully Tested And Calibrated - FISHER ISOTEMP OV600G LABORATORY OVEN - FULLY RECONDITIONED. This laboratory oven is gorgeous and in perfect working order. It is in tip-top shape. It has a temperature range of 40 to 220 degrees C.
National Labnet 211-Ds Shaking Incubator 9120865 For Laboratory Use - All pictures shown above are of actual product(s) sold. Item(s) are sold-as-is as shown in pictures above. It was previously used at a local university,Unit powers on. Only includes what is shown in pictures below.
Dental Lab Wax Burnout Furnace NEW - With its unbeatable price/performance ratio, the compact burnout furnace is optimally suited for burnout in the dental laboratory. Main Features of Wax Burnout Furnace Technical Data ofWax Burnout Furnace .
INTBUYING AC 220V Digital Forced Air Convection Drying Oven w/Shelves 160110 - 220V 101-0AB Digital Forced Air Convection Drying Oven (160110). Desktop Digital Forced Air Convection Drying Oven 220V Lab Drying Oven Electric Drying Oven Incubator w/Windows. 【Application】This device is used for drying and heating processes through hot air circulation system at laboratories in enterprises, schools and scientific institutions.
Theta Industries Inc. Rheotronic, Furnace Power Controller - Used, in good cosmetic condition with some scuffs/scratches from normal use and storage. We have tested this unit to power up only as we do not have the means or knowledge to properly test. The digital displays are bright and in great condition. Unfortunately we do not have any manuals or accessories for this unit. We are not familiar with this equipment so please refer closely to all photos to see exactly what you will receive. We are offering free shipping to the contiguous 48 states in the USA.
Jisico J-300S Forced Convection Oven 3.2 cu. ft./91 l 260°C w/Rotary Holder - Jisico J-300S Forced Convection Oven 3.2 cu. ft./91 l 260°C with a 0-200 RPM Variable Speed Rotary Holder. Specifications are from Jisico and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
Asbestos Square Rod for Furnace Medical & Lab Equipment Devices - However, that is why is most cases the unit/item is listed "AS-IS for parts or repair", leaving you to draw your own conclusions about the unit/item. If the item sealed with a temper evident tape or stickers, these must be left intact as you inspect the unit/item.
Omega Engineering Model Cn1204-Pr-Rsp-Ramp Controller (Cq10) - We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is atta.
Lindberg 54233, 59545 1500ºC Heavy Duty Tube Furnace - They have not been tested. You will only receive what is actually shown in the photos. Therefore, we are not familiar with all the parts or accessories that would be included from the manufacturer.
Stack Cooler Dw , Mc04-01-Rev G. S/N 7393 -Ln 287109(16355-11) - STACK COOLER DW, MC04-01-REV G. S/N 7393 -LN 287109. Check your settings and spam folder. NO EXCEPTIONS. IN GOOD WORKING ORDER. For local pick up Cash Only. Since 1991, Laserlink International, Inc. has been providing its expertise and service!
EGPL 081 Miele Dental Thermal Disinfector G 7881 Control Board - All parts are previously used unless otherwise stated. They are inspected here in-house and are individually pictured. What you see in the picture is what you will be receiving. We do our best to ensure everything is in working order.
G179185 MTI Corp. DZF-6020-HT/500 Hi-Temp Compact Vacuum Oven - G179185 MTI Corp. DZF-6020-HT/500 Hi-Temp Compact Vacuum Oven. This is for a used high-temp compact vacuum oven. It was used in a clean working lab. IF THE MISTAKE IS MUTUAL (I.E. NO EXCEPTIONS! ).
Forced Air Laboratory Drying Oven TESTED with warranty SEE Video - The VWR Forced Air Oven has a durable powder coated exterior, glass wool installation between panels and chamber, along with the stainless-steel interior. The oven chamber is constructed out of polished stainless steel making clean up, quick and painless.
Bachofer 400 HY-E Lab Hybidization Oven Laboratoriumgeräte Germany *Parts/Repair - We tested the oven by plugging it in and powering it on. The rotor rod spins when the motor is turned on. We had to open the side and re-attach the drive chain to its sprocket as the plate that centers the rod inside the chamber is missing.
Hot Air Oven 14X14X14 S.S. Chamber With Digital Temperature Controller - Hot Air Oven - MAKE Temp Range:-Room To 200 Deg.Inner Chamber S.S. And Outer Body Ms Powder Coated Heavy Gauge. (SIZE AND CAP AVAILABLE -350X350X350 Mm 14x14x14" 45Ltr Cap/300x300x300 Mm 1212x12" 28Ltr Cap).
VWR Sheldon 1400E Laboratory Vacuum Drying Oven Lab *Parts/Repair* - We borrowed a gasket from another oven. With the gasket secured in place, we then locked the door and connected a JB DV-200N vacuum pump. After opening the valve and powering on the pump, a vacuum began to form.The gauge indicates it successfully reached a vacuum of 28 in.Hg during our testing.
Hybaid Hs9320 Rotisserie Hybridization Oven ! (287385) - ((InvIDs))287385(((InvIDs))). A White Glove service can also install the freight in many instances. (We are not providing White Glove Services). We do not provide White Glove Services . Phone: (410) 782-0444.
Precision Laboratory Oven Model 1025 51220126 - All pictures shown above are of actual product(s) sold. Item(s) are sold-as-is as shown in pictures above. Previously used at a local university, Powers on heats and works. Only includes what is shown in pictures below.
1.5 cu ft Digital Forced Air Convection Drying Oven Temperature Control 1900W - 220V 101-0AB Digital Forced Air Convection Drying Oven. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
INTSUPERMAI Updated Digital Forced Air Convection Drying Oven 220V 20cm Window - INTSUPERMAI ®. Desktop Digital Forced Air Convection Drying Oven 220V Lab Drying Oven Electric Drying Oven Incubator w/Windows. 220V 101-0AB Digital Forced Air Convection Drying Oven (160110). Large double layer toughened glass window is convenient to observe the changes of contents in the box.
Digital Forced Air Convection Drying Oven 1900W 1.5 cu ft Temperature Controller - 220V 101-0AB Digital Forced Air Convection Drying Oven. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
Sheldon Lab VWR 1012AG Hybridization Oven w/Carousel, #38704 - This unit has been thoroughly tested. It was very lightly used.VWR Sheldon Labs 1012AG Hybridization Oven with Carousel S/N: 03033004Temperature Range: Amb. +5 to 65C in 7 min.Temperature Uniformity: +/- 0.25CTemperature Precision: 0.1CRotational Speed Control: Manually adjustable control maintains carousel speed from 0 to 15 RPMDimensions: Exterior: 18"W x 12"D x 21"HInterior: 12.5"W x 12"D x 14.5"HElectrical Requirements: 115V, 60Hz, 4.5A
14x13.5x14" 1.5 Cu Ft Digital Forced Air Convection Drying Sterilizing Oven 220V - 220V 101-0AB Digital Forced Air Convection Drying Oven. Large double layer toughened glass window is convenient to observe the changes of contents in the box. Exterior size (D×W×H). Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
1.5 Cu Ft Forced Air Convection Drying Oven Two Layers 20-572 F Lab Equipment - 220V 101-0AB Digital Forced Air Convection Drying Oven. Large double layer toughened glass window is convenient to observe the changes of contents in the box. The device is equipped with an independent fan switch that can be turn on or off as needed.
Updated 220V 1KW 101-0AB Industry Lab Digital Forced Air Convection Drying Oven - Large double layer toughened glass window is convenient to observe the changes of contents in the box. Exterior size (D×W×H). Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
220V Industrial Digital Forced Air Convection Drying Oven for Lab Drying Baking - 220V 101-0AB Digital Forced Air Convection Drying Oven. Large double layer toughened glass window is convenient to observe the changes of contents in the box. Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
TECHTONGDA 220V Laboratory Digital Forced Air Convection Drying Oven - 220V 101-0AB Digital Forced Air Convection Drying Oven. Large double layer toughened glass window is convenient to observe the changes of contents in the box. Exterior size (D×W×H). Hot air circulation system adopts the double air duct circulation of high temperature resistant and low noise fan, ensuring that the fan service life is longer and the temperature in the box is more uniform.
UniTherm Hybridization Oven 6/12 - Temp Range: ambient plus 5° C to 90° C. Holds 6 large or 12 small hybridizations bottles. Rotor capacity: 6 tubes 300 x 35mm or 12 tubes 150 x 35mm. Electrical: 120V, 50 Hz, 2.6 A, 550 W.
Fisher Scientific Isotemp Warmer/ Oven Model 516G, For Parts/ Repair - S ale Includ es: Fisher Scientific Isotemp Oven model 516G, For Parts/ Repair. Function: This item is for PARTS/ REPAIR. Unit has NOT been tested. Sold AS-IS. Sorry, no other parts, wiring or accessories included.
Ovens Heratherm OMH60-S - Thermo scientific Ovens Heratherm OMH60-S We have 7 available. These incubators are an effective and flexible tool in the lab, to be used for multiple applications. Intuitive user interface for setting temperature.
^^ Eurotherm Lindberg Digital Power Controller 818P P/N 103355 (Mu60) - We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is atta.
Kulzer Siloc oven - Kulzer Siloc oven. Used silicone curing unit in great condition FREE UPS ground shipping in continental US
^^Honeywell Furnace Temperature Cotroller W/ Variac (Wk31) - We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is atta.
Alpha PC Jelrus - Refurbished Jelrus Alpha PC for the Dental Lab. The ALPHA PC Porcelain Furnace brings the power of the modern microcomputer to the dental laboratory. In addition,it clearly displays all the program information.
Boekel VWR Hybridization Rotisserie Oven Model 230500 NICE!!! - Here is a used but very nice VWR Scientific Products hybridization rotisserie oven model 230500. Tested working great and getting right up to temperature. Variable speed rotisserie works well also.
Unitek Ultra Mat CDF dental porcelain oven - Unitek Ultra Mat CDF dental porcelain oven. Well cared for porcelain furnace. No longer needed. I have no way to ship. Must pick up in person
Biotherm BioOven III 30-202 - 115V, 50/60Hz. Flexible Programming. Ergonomic Display. User-Friendly Operation. High Speeds.
Dental Crucible for Zirconia Crowns Sintered with Cover Round Shape Holding Bead - 3, opened mouth conducive to heat transfer through the heat crown will not heat evenly uneven temperature warpage. 5,thickness of wall: 3.5mm or so. 2, apertures strong high thermal conductivity and thermal shock resistance can be repeatedly used strong.
Thermo Scientific 664 Compact Oven ! (265482) - ((InvIDs))265482(((InvIDs))). Look at the pictures these are of the actual. item that you will be getting. A White Glove service can also install the freight in many instances. (We are not providing White Glove Services).
Lab-Line 3490M Imperial IV Microprocessor Oven - Lab-Line 3490M Imperial IV Microprocessor Oven. Condition is “Used”. Local pickup. Used condition Local pickup or message me to arrange shipping. 5000 KW
Despatch LEB1-21-3 Despatch Oven - 16814 - Our Inventory: 16814. Despatch LEB1-21-3 Despatch Oven Power 120 volts, 1 PH, 60 Hz Max Temp. - 204 C / 400F Make: Despatch Model: LEB1-21-3. If more than one Quantity is available, photos may be similar and not exact.
Ceramic Fiber LAB Electric Furnace High Temperature Small Lab Furnace 220V - Furnace size 165 120 105mm. Furnace structure and materials. 3.1 Furnace shell material: The outer box shell is made of high-quality cold plate, treated with phosphoric acid film salt, and sprayed at high temperature, and the color is computer gray;.
Ceramic Fiber LAB Electric Furnace Integrated Program-Controlled Furnace 220V - Furnace size 165 120 105mm. Furnace structure and materials. 3.1 Furnace shell material: The outer box shell is made of high-quality cold plate, treated with phosphoric acid film salt, and sprayed at high temperature, and the color is computer gray;.
Ceramic Fiber Laboratory Electric Furnace Integrated Program-Controlled Furnace - Furnace size 165 120 105mm. Furnace structure and materials. 3.1 Furnace shell material: The outer box shell is made of high-quality cold plate, treated with phosphoric acid film salt, and sprayed at high temperature, and the color is computer gray;.
Inductotherm Power-Trak 225-30 225Kw Vip Induction Control Furnace (#3492) - 460 V 3 PH 60 HZ. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Drying Oven Industrial Big Size D24 - DRYING OVEN INDUSTRIAL. Inner & outer chamber made out of thick mild steel sheet. Heavy duty forced air blowers are provided to constantly circulate hot air to achieve uniform temp. in the whole chamber.
G161997 SierraTherm LTCC16-24-4A Forced Convection Elevator Batch Oven - The advertised temperature achievable is 1050°C. One computer has the SierraTherm Furnace Monitoring System Software loaded on it, as shown. Each of the computers power-up although only one has the SierraTherm Furnace Monitoring System Software loaded on it.
Advanced Bio-Surfaces (ABS) 9024 Time Cycle Oven (Mini Incubator) - Model: 9024. Type:Incubator, Oven. Electric-motor powered rotisserie function. We make every attempt to describe each item correctly and provide pictures for your review. Make: Advanced Bio-Surfaces (ABS).
Lab-Line 309 Hybridization Incubator Oven - Lab-Line Hybridization Incubator Serial# 0597-0120. Attached AC Power Cord. Very good working condition showing few signs of previous use. in very good working condition.
Mti Ksl 1800x Muffle Furnace - It is an ideal tool for materials annealing and sintering in your research laboratory. Furnace Construction. • +/- 2 °C over 80 mm (3") @ 1700 °C. • +/- 5 °C over 120 mm (5") @ 1700 °C. Accuracy: +/- 1 °C.
Lindberg Furnace Type 54233 1500 Deg C Parts Or Repair - LINDBERG FURNACE TYPE 54233 1500 DEG C. This unit was used in an engineering lab. This unit is sold for part and/or repair. This unit will need inspection and service by qualified personnel prior to use for any purposes.
Tenny JR Versa Lab Oven - You are buying one (1) used Tenny JR Versa Lab Oven in good condition.
Vwr Scientific 1430 6.5A 1.5 Cu-Ft Vacuum Oven - APPROXIMATE INSIDE DIM: 19-1/4" x 11-3/4" x 12". The item you receive may be different from the actual item in the photo in the case of multiple quantity lotsa. APPROXIMATE OUTSIDE DIM: 24-5/8" x 23" x 19".
Vwr Scientific 1430 9A 1.5 Cu-Ft Vacuum Oven - APPROXIMATE INSIDE DIM: 19-1/4" x 11-3/4" x 12". The item you receive may be different from the actual item in the photo in the case of multiple quantity lotsa. APPROXIMATE OUTSIDE DIM: 24-5/8" x 23" x 19".
Heraeus Hera Cell Incubator (#3049) - APRIL 2020. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Fisher Scientific Oven Model 203Fs 11-690-5160 - All pictures shown above are of actual product(s) sold. Item(s) are sold-as-is as shown in pictures above. Previously used at a local university, Powers on and works. Only includes what is shown in pictures below.
Shel Lab/Sheldon CR1-2 HF° 3.7 cu. ft. 250°C Class 100 Cleanroom Oven - Shel Lab/Sheldon CR1-2 HF° 3.7 cu. ft. 250°C Class 100 Cleanroom Oven. This model includes are the features noted for the High Performance Horizontal Airflow Ovens. Filters are easily removed and replaced.
Lab Muffle Furnace for Heat Treatment, Melting Oven 1200℃ 1400℃ 1700℃ 110V 220V - a) The use of advanced AI artificial intelligence adjustment algorithm, no overshoot, with self-tuning function, can achieve any slope of the rise and fall control, with jump (cycle) ﹑ ﹑ running ﹑ pause and stop programmable / operable commands. b) input and output using digital correction system, accurate measurement and stability, can be extended using any sub-degree of non-linear sensor. c) second-order digital filtering and watchdog circuit, in a strong interference environment can also maintain accurate measurement and stable work. d) measurement accuracy: 0.2 level e) Alarm function: upper limit, input open circuit. f) automatic / manual no disturbance switch, 50 program control function. Post by DHL/FedEx/UPS; Delivery whthin 7-14 business days; Wooden box packaging.
Blue M OV-475A-1X Stabil-Therm Electric Convection Utility Oven - Specifications are from manufacturer and may vary slightly due to upgrades, options, or revisions this unit may or may not have. The Item may vary from picture as manufacture may change model appearance.
VWR Sheldon Laboratory Gravity Oven, Model 1326-2, 220V - VWR Sheldon Laboratory Gravity Oven, Model 1326-2, 220V. 5A, 50/60hz. Working as it should , can be used for it's intended purpose(s). Some minor cosmetic scratched and dents that not not effect use. Unit powers on when plugged into a 220V receptacle, however, the power button does not switch off.
VWR 1350FM-2 Forced Air Oven - 12777 - Our Inventory: 12777. If more than one Quantity is available, photos may be similar and not exact. Is a Loading dock and/or forklift available?.
National Appliance Company 5851 Oven For Parts/Repair - ITEM IS FOR PARTS OR REPAIR. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Maple Grove, MN 55369-4551. 8808 Monticello Lane North.
Steel Horizontal Constant Drying Oven 250°C 14*14*14" Lab Stainless rortd - Horizontal Constant Temperature Drying Oven. Door with silicon rubber seal ensures good sealability. 5.Low-noise fan enables long continuous working. Cold rolling steel electrostatic spraying exterior; stainless steel or cold rolling steel corrosion-resistant inner chamber.
Lab Forced Air Drying Oven 250°C 18*14*18" New eleo-tool - Force air DRYING OVEN. Forced Air: 2.5% Thermostatic: 3.5%. Cold rolling steel electrostatic spraying exterior, novelty and nice. RT+10~250℃. Digital display of temperature inside makes read easily. Heating Power.
Steel Horizontal Constant Drying Oven 250°C 14*14*14" Lab Stainless hlxe - Horizontal Constant Temperature Drying Oven. Door with silicon rubber seal ensures good sealability. 5.Low-noise fan enables long continuous working. Cold rolling steel electrostatic spraying exterior; stainless steel or cold rolling steel corrosion-resistant inner chamber.
Lab Forced Air Drying Oven 250°C 18*14*18" New hlxe - Force air DRYING OVEN. Forced Air: 2.5% Thermostatic: 3.5%. Cold rolling steel electrostatic spraying exterior, novelty and nice. RT+10~250℃. Digital display of temperature inside makes read easily. Heating Power.
Steel Horizontal Constant Drying Oven 250°C 14*14*14" Lab Stainless ehhqqq - Horizontal Constant Temperature Drying Oven. Door with silicon rubber seal ensures good sealability. 5.Low-noise fan enables long continuous working. Cold rolling steel electrostatic spraying exterior; stainless steel or cold rolling steel corrosion-resistant inner chamber.
Lab Forced Air Drying Oven 250°C 18*14*18" New ehhqqq - Force air DRYING OVEN. Forced Air: 2.5% Thermostatic: 3.5%. Cold rolling steel electrostatic spraying exterior, novelty and nice. RT+10~250℃. Digital display of temperature inside makes read easily. Heating Power.
Steel Horizontal Constant Drying Oven 250°C 14*14*14" Lab Stainless ddffhh - Horizontal Constant Temperature Drying Oven. Door with silicon rubber seal ensures good sealability. 5.Low-noise fan enables long continuous working. Cold rolling steel electrostatic spraying exterior; stainless steel or cold rolling steel corrosion-resistant inner chamber.
Lab Forced Air Drying Oven 250°C 18*14*18" New ddffhh - Force air DRYING OVEN. Forced Air: 2.5% Thermostatic: 3.5%. Cold rolling steel electrostatic spraying exterior, novelty and nice. RT+10~250℃. Digital display of temperature inside makes read easily. Heating Power.
Steel Horizontal Constant Drying Oven 250°C 14*14*14" Lab Stainless dcdr - Horizontal Constant Temperature Drying Oven. Door with silicon rubber seal ensures good sealability. 5.Low-noise fan enables long continuous working. Cold rolling steel electrostatic spraying exterior; stainless steel or cold rolling steel corrosion-resistant inner chamber.
Lab Forced Air Drying Oven 250°C 18*14*18" New dcdr - Force air DRYING OVEN. Forced Air: 2.5% Thermostatic: 3.5%. Cold rolling steel electrostatic spraying exterior, novelty and nice. RT+10~250℃. Digital display of temperature inside makes read easily. Heating Power.
Steel Horizontal Constant Drying Oven 250°C 14*14*14" Lab Stainless enpod - Horizontal Constant Temperature Drying Oven. Door with silicon rubber seal ensures good sealability. 5.Low-noise fan enables long continuous working. Cold rolling steel electrostatic spraying exterior; stainless steel or cold rolling steel corrosion-resistant inner chamber.
Lab Forced Air Drying Oven 250°C 18*14*18" New enpod - Force air DRYING OVEN. Forced Air: 2.5% Thermostatic: 3.5%. Cold rolling steel electrostatic spraying exterior, novelty and nice. RT+10~250℃. Digital display of temperature inside makes read easily. Heating Power.
220V 30L Digital Forced Air Drying Oven 12×12×12″ New eleo-tool - Forced Air Oven. Well coordinated bottom air blower and heater and vertical hot air circulation ensure the temperature evenness. Vertical type, cold rolling steel electrostatic spraying exterior. Range ( ℃ ).
220V 30L Digital Forced Air Drying Oven 12×12×12″ New hlxe - Forced Air Oven. Well coordinated bottom air blower and heater and vertical hot air circulation ensure the temperature evenness. Vertical type, cold rolling steel electrostatic spraying exterior. Range ( ℃ ).
220V 30L Digital Forced Air Drying Oven 12×12×12″ New ehhqqq - Forced Air Oven. Well coordinated bottom air blower and heater and vertical hot air circulation ensure the temperature evenness. Vertical type, cold rolling steel electrostatic spraying exterior. Range ( ℃ ).
220V 30L Digital Forced Air Drying Oven 12×12×12″ New ddffhh - Forced Air Oven. Well coordinated bottom air blower and heater and vertical hot air circulation ensure the temperature evenness. Vertical type, cold rolling steel electrostatic spraying exterior. Range ( ℃ ).
220V 30L Digital Forced Air Drying Oven 12×12×12″ New dcdr - Forced Air Oven. Well coordinated bottom air blower and heater and vertical hot air circulation ensure the temperature evenness. Vertical type, cold rolling steel electrostatic spraying exterior. Range ( ℃ ).
220V 30L Digital Forced Air Drying Oven 12×12×12″ New enpod - Forced Air Oven. Well coordinated bottom air blower and heater and vertical hot air circulation ensure the temperature evenness. Vertical type, cold rolling steel electrostatic spraying exterior. Range ( ℃ ).
New 65L Digital Forced Air Drying Oven 16×14×18″ 40×36×45cm 1600W New WGL eleo - Forced Air Oven. Well coordinated bottom air blower and heater and vertical hot air circulation ensure the temperature evenness. Vertical type, cold rolling steel electrostatic spraying exterior. Exterior Size (mm): 540×540×830 21.25×21.25×32.67 ″.
New 65L Digital Forced Air Drying Oven 16×14×18″ 40×36×45cm 1600W New WGL hlxe - Forced Air Oven. Well coordinated bottom air blower and heater and vertical hot air circulation ensure the temperature evenness. Vertical type, cold rolling steel electrostatic spraying exterior. Exterior Size (mm): 540×540×830 21.25×21.25×32.67 ″.
New 65L Digital Forced Air Drying Oven 16×14×18″ 40×36×45cm 1600W New WGL ehhqqq - Forced Air Oven. Well coordinated bottom air blower and heater and vertical hot air circulation ensure the temperature evenness. Vertical type, cold rolling steel electrostatic spraying exterior. Exterior Size (mm): 540×540×830 21.25×21.25×32.67 ″.
30KW High Frequency Induction Heater Furnace eleo-tool - 30KW High Frequency Induction Heating Machine. Oscillation frequency output. Tks for your understanding and cooperation. Water flow>6L/MIN. Constant current mode. Cooling water pressure. Cooling water temperature<40°C.
New 65L Digital Forced Air Drying Oven 16×14×18″ 40×36×45cm 1600W New WGL ddffhh - Forced Air Oven. Well coordinated bottom air blower and heater and vertical hot air circulation ensure the temperature evenness. Vertical type, cold rolling steel electrostatic spraying exterior. Exterior Size (mm): 540×540×830 21.25×21.25×32.67 ″.
30KW High Frequency Induction Heater Furnace hlxe - 30KW High Frequency Induction Heating Machine. Oscillation frequency output. Tks for your understanding and cooperation. Water flow>6L/MIN. Constant current mode. Heating current oscillation. The comprehensive full load design is avaiabe for 24-hour continuous operation.
30KW High Frequency Induction Heater Furnace ehhqqq - 30KW High Frequency Induction Heating Machine. Oscillation frequency output. Tks for your understanding and cooperation. Water flow>6L/MIN. Constant current mode. Heating current oscillation. The comprehensive full load design is avaiabe for 24-hour continuous operation.
New 65L Digital Forced Air Drying Oven 16×14×18″ 40×36×45cm 1600W New WGL dcdr - Forced Air Oven. Well coordinated bottom air blower and heater and vertical hot air circulation ensure the temperature evenness. Vertical type, cold rolling steel electrostatic spraying exterior. Exterior Size (mm): 540×540×830 21.25×21.25×32.67 ″.
30KW High Frequency Induction Heater Furnace ddffhh - 30KW High Frequency Induction Heating Machine. Oscillation frequency output. Tks for your understanding and cooperation. Water flow>6L/MIN. Constant current mode. Heating current oscillation. The comprehensive full load design is avaiabe for 24-hour continuous operation.
New 65L Digital Forced Air Drying Oven 16×14×18″ 40×36×45cm 1600W New WGL enpod - Forced Air Oven. Well coordinated bottom air blower and heater and vertical hot air circulation ensure the temperature evenness. Vertical type, cold rolling steel electrostatic spraying exterior. Exterior Size (mm): 540×540×830 21.25×21.25×32.67 ″.
30KW High Frequency Induction Heater Furnace dcdr - 30KW High Frequency Induction Heating Machine. Oscillation frequency output. Tks for your understanding and cooperation. Water flow>6L/MIN. Constant current mode. Heating current oscillation. The comprehensive full load design is avaiabe for 24-hour continuous operation.
New LCD Constant-temperature Thermostatic Drying Oven 14×14×14″ eleo-tool - Constant-temperature Drying Oven. Cold rolling steel electrostatic spraying exterior. LCD digital screen. No blowing, natural convection heating circulation ensures temperature evenness and prevents tiny and powdery substances blowing away.
30KW High Frequency Induction Heater Furnace enpod - 30KW High Frequency Induction Heating Machine. Oscillation frequency output. Tks for your understanding and cooperation. Water flow>6L/MIN. Constant current mode. Heating current oscillation. The comprehensive full load design is avaiabe for 24-hour continuous operation.
New LCD Constant-temperature Thermostatic Drying Oven 14×14×14″ hlxe - Constant-temperature Drying Oven. Cold rolling steel electrostatic spraying exterior. LCD digital screen. No blowing, natural convection heating circulation ensures temperature evenness and prevents tiny and powdery substances blowing away.
New LCD Constant-temperature Thermostatic Drying Oven 14×14×14″ ehhqqq - Constant-temperature Drying Oven. Cold rolling steel electrostatic spraying exterior. LCD digital screen. No blowing, natural convection heating circulation ensures temperature evenness and prevents tiny and powdery substances blowing away.
New LCD Constant-temperature Thermostatic Drying Oven 14×14×14″ ddffhh - Constant-temperature Drying Oven. Cold rolling steel electrostatic spraying exterior. LCD digital screen. No blowing, natural convection heating circulation ensures temperature evenness and prevents tiny and powdery substances blowing away.
New LCD Constant-temperature Thermostatic Drying Oven 14×14×14″ dcdr - Constant-temperature Drying Oven. Cold rolling steel electrostatic spraying exterior. LCD digital screen. No blowing, natural convection heating circulation ensures temperature evenness and prevents tiny and powdery substances blowing away.
New LCD Constant-temperature Thermostatic Drying Oven 14×14×14″ enpod - Constant-temperature Drying Oven. Cold rolling steel electrostatic spraying exterior. LCD digital screen. No blowing, natural convection heating circulation ensures temperature evenness and prevents tiny and powdery substances blowing away.
New 2 in 1 Drying Oven & Incubator 12×12×12″ Fast Shipping eleo-tool - Double Function Drying Oven & Incubator. Range ( ℃ ): A: as Incubator :RT+5 ~80 ℃B: as Drying Oven :80 ~250 ℃. Power as Drying oven: 800W Power as Incubator: 300W. Timing range: 1-9999min. We will do our best to help solve the problem.
New 2 in 1 Drying Oven & Incubator 12×12×12″ Fast Shipping hlxe - Double Function Drying Oven & Incubator. Range ( ℃ ): A: as Incubator :RT+5 ~80 ℃B: as Drying Oven :80 ~250 ℃. Power as Drying oven: 800W Power as Incubator: 300W. Timing range: 1-9999min. Australia ,New Zealand ,Korea South, Malaysia, Thailand, Philippines ,Singapore, Bruniei ,Taiwan, Macau, Indonesia.
New 2 in 1 Drying Oven & Incubator 12×12×12″ Fast Shipping ehhqqq - Double Function Drying Oven & Incubator. Range ( ℃ ): A: as Incubator :RT+5 ~80 ℃B: as Drying Oven :80 ~250 ℃. Power as Drying oven: 800W Power as Incubator: 300W. Timing range: 1-9999min. Australia ,New Zealand ,Korea South, Malaysia, Thailand, Philippines ,Singapore, Bruniei ,Taiwan, Macau, Indonesia.
New 2 in 1 Drying Oven & Incubator 12×12×12″ Fast Shipping ddffhh - Double Function Drying Oven & Incubator. Range ( ℃ ): A: as Incubator :RT+5 ~80 ℃B: as Drying Oven :80 ~250 ℃. Power as Drying oven: 800W Power as Incubator: 300W. Timing range: 1-9999min. Australia ,New Zealand ,Korea South, Malaysia, Thailand, Philippines ,Singapore, Bruniei ,Taiwan, Macau, Indonesia.
New 2 in 1 Drying Oven & Incubator 12×12×12″ Fast Shipping dcdr - Double Function Drying Oven & Incubator. Range ( ℃ ): A: as Incubator :RT+5 ~80 ℃B: as Drying Oven :80 ~250 ℃. Power as Drying oven: 800W Power as Incubator: 300W. Timing range: 1-9999min. Australia ,New Zealand ,Korea South, Malaysia, Thailand, Philippines ,Singapore, Bruniei ,Taiwan, Macau, Indonesia.
New 2 in 1 Drying Oven & Incubator 12×12×12″ Fast Shipping enpod - Double Function Drying Oven & Incubator. Range ( ℃ ): A: as Incubator :RT+5 ~80 ℃B: as Drying Oven :80 ~250 ℃. Power as Drying oven: 800W Power as Incubator: 300W. Timing range: 1-9999min. Australia ,New Zealand ,Korea South, Malaysia, Thailand, Philippines ,Singapore, Bruniei ,Taiwan, Macau, Indonesia.
New Digital Vacuum Drying Oven 250°C 16x15x13" 41.5x37x34cm hlxe - VACUUM DRYING OVEN. (%) Vacuum degree. Optional air inflating port for insert gas replenishing. Australia ,New Zealand ,Korea South, Malaysia, Thailand, Philippines ,Singapore, Bruniei ,Taiwan, Macau, Indonesia.
New Digital Vacuum Drying Oven 250°C 16x15x13" 41.5x37x34cm ehhqqq - VACUUM DRYING OVEN. (%) Vacuum degree. Optional air inflating port for insert gas replenishing. Australia ,New Zealand ,Korea South, Malaysia, Thailand, Philippines ,Singapore, Bruniei ,Taiwan, Macau, Indonesia.
New Digital Vacuum Drying Oven 250°C 16x15x13" 41.5x37x34cm ddffhh - VACUUM DRYING OVEN. (%) Vacuum degree. Optional air inflating port for insert gas replenishing. Australia ,New Zealand ,Korea South, Malaysia, Thailand, Philippines ,Singapore, Bruniei ,Taiwan, Macau, Indonesia.
New Digital Vacuum Drying Oven 250°C 16x15x13" 41.5x37x34cm dcdr - VACUUM DRYING OVEN. (%) Vacuum degree. Optional air inflating port for insert gas replenishing. Australia ,New Zealand ,Korea South, Malaysia, Thailand, Philippines ,Singapore, Bruniei ,Taiwan, Macau, Indonesia.
New Digital Vacuum Drying Oven 250°C 16x15x13" 41.5x37x34cm enpod - VACUUM DRYING OVEN. (%) Vacuum degree. Optional air inflating port for insert gas replenishing. Australia ,New Zealand ,Korea South, Malaysia, Thailand, Philippines ,Singapore, Bruniei ,Taiwan, Macau, Indonesia.
VWR S/P 1430 Vacuum Oven (9100585) 120 Volts 750 Watts - Used Working. -New or Like New. Tested/Evaluated and Non-functioning. -Tested for Key Functions. -Tested for Full Function. Collectible Electronic. Specialty Electronic. R2/Ready for Repair.
Harper Model Hou- 4D-30-T-28 Industrial Tube Furnace 1500 Degrees C 4 Inch Dia. - Harper International is a global leader in complete thermal processing solutions and technical services essential for the production of advanced materials. We specialize in first-of-a-kind solutions using our exceptional depth and breadth of knowledge in material science and engineering.
New 25KW 30-80KHz Dual High Frequency Induction Heater LH-25AB eleo-tool - With 100% load design, can work in 24 hours without stop. 25 KW Dual Station High Frequency Induction Heater Furnace. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
New 25KW 30-80KHz Dual High Frequency Induction Heater LH-25AB hlxe - With 100% load design, can work in 24 hours without stop. 25 KW Dual Station High Frequency Induction Heater Furnace. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
New 25KW 30-80KHz Dual High Frequency Induction Heater LH-25AB ehhqqq - With 100% load design, can work in 24 hours without stop. 25 KW Dual Station High Frequency Induction Heater Furnace. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
New 25KW 30-80KHz Dual High Frequency Induction Heater LH-25AB ddffhh - With 100% load design, can work in 24 hours without stop. 25 KW Dual Station High Frequency Induction Heater Furnace. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
New 25KW 30-80KHz Dual High Frequency Induction Heater LH-25AB enpod - With 100% load design, can work in 24 hours without stop. 25 KW Dual Station High Frequency Induction Heater Furnace. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
25KW 30-80KHz High Frequency Induction Heater Furnace LH-25A eleo-tool - 25 KW 30-80 KHz High Frequency Induction Heater Furnace. With 100% load design, can work in 24 hours without stop. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
25KW 30-80KHz High Frequency Induction Heater Furnace LH-25A hlxe - 25 KW 30-80 KHz High Frequency Induction Heater Furnace. With 100% load design, can work in 24 hours without stop. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
25KW 30-80KHz High Frequency Induction Heater Furnace LH-25A ehhqqq - 25 KW 30-80 KHz High Frequency Induction Heater Furnace. With 100% load design, can work in 24 hours without stop. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
25KW 30-80KHz High Frequency Induction Heater Furnace LH-25A ddffhh - 25 KW 30-80 KHz High Frequency Induction Heater Furnace. With 100% load design, can work in 24 hours without stop. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
25KW 30-80KHz High Frequency Induction Heater Furnace LH-25A enpod - 25 KW 30-80 KHz High Frequency Induction Heater Furnace. With 100% load design, can work in 24 hours without stop. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
Lab Dryer 36L 72L Forced Air Oven Hot Air Circulation Drying Oven ±1℃ RT+10~250℃ - Product introduction Blast Drying Oven is designed to do drying test, baking test, heat treatment test, disinfecting test, etc. It can be filed with inert gas and dry some ingredient complex materials quickly. 1. It is applicable to such test as drying, cure melting, sterilizing in industrial and mining enterprises as well as in laboratory and scientific research institutes. 2. Used for drying, baking wax-melting and sterilization for industrial in mining enterprises, laboratories, research units, etc. 3. It is applicable for drying, cure, melting and sterilization in industrial and mining enterprises, laboratories and scientific research institutes. Features 1. The oven body of inside adopts mirror stainless steel (or wire drawing board)argon arc-welding, shell adopts high quality s.
Benchmark Scientific BSH1002, Two-Block Digital Dry Bath 115V - BSH1002, Two-Block Digital Dry Bath 115V. Safety Products. If we don't have enough units listed, we may be able to acquire more. Subject to availability. Digital accuracy and convenience. Add to Favorite.
Lipshaw 218 electric laboratory drier - Not Working?. Sparta TN 38583. 2067 Roberts Matthews Hwy. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Let our family help yours!
20KW 30-100KHz 3-Phase High Frequency Induction Heater Furnace Melting Heating - Model 20KW. 1x 20KW High Frequency Induction Heater Furnace. With 100% load design, can work in 24 hours without stop. Induction Heating Power 20 KW. if you need Single phase 220V, plz let us know. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
Lab 0.28 - 15.2 cu.ft Stainless Steel Vacuum Drying Oven Heating Range RT~200℃ - Vacuum Drying Oven is designed for heat sensitive, labile and readily oxidization materials to do drying tests, baking tests, heat treatment tests, disinfecting test, etc. Normally the oven is widely used in the fields of Electrics, Electronics, Instruments, Materials, Education, Medicine, chemical industry or other Scientific Research Organizations and Production Units. Feature (1)Heat treatment of combustible and explosive solvents (2)Specially for the drying of lacquers and other coating materials (3)Square design, make full use of space, more economic, affordable (4)Natural convection and forced air circulation (5)High quality materials.
VWR 1600 Series HAFO laboratory oven - VWR 1600 Series HAFO laboratory oven, model 1675. Used, in good condition, the discoloration is from the product that was analyzed.
(1) Thermco Products MINI BRUTE. LARGE TUBE FURNACE TYPE MB/71 - Thermco Products MINI BRUTE. LARGE TUBE FURNACE TYPE MB/71. You will get one unit. These were purchased from a lab that closed. I do not know how to test them but was told they work fine. They are in great condition. These are very large/heavy. So pickup is free or message me about shipping. If you just want one unit please message me. Thanks.
BEST Lab Digital Vacuum Drying Oven 250°C 12x12x11" Cold Rolling Steel - VACUUM DRYING OVEN. Cold rolling steel inner chamber treated by anti-corrosion technology ensures the longevity of the product. Vacuum degree(Pa) < 133Pa. range RT+10~250℃. Exterior Size(mm) 480×480×605(18.89×18.89×23.81″).
FAST Lab Digital Vacuum Drying Oven 250°C 12x12x11" Cold Rolling Steel - VACUUM DRYING OVEN. Cold rolling steel inner chamber treated by anti-corrosion technology ensures the longevity of the product. Vacuum degree(Pa) < 133Pa. range RT+10~250℃. Exterior Size(mm) 480×480×605(18.89×18.89×23.81″).
General Signal GS Lindberg Blue M Electric Oven MO-406C - Large - 240 Volts - 1 Phase - Frequency 60. We will do everything we can to resolve your issue. We can’t test this item so it will be sold in unknown working condition. You will receive exactly the item you see in the pictures.
Explosion Proof Enclosure with Scientific Gold Vacuum Oven Bebco 2003-STD-STD-CI - We powered up this unit with 220v single phase and the Bebco unit powers up fine as you can see in the video. I tried to use the bypass switch on the bebco but that again requires enough air to pressure to keep the unit in the safe zone for 5 minutes before it will power.
25KW 30-100KHz 3-Phase High Frequency Induction Heater Furnace Melting Heating - Model 25KW. 1x 25KW High Frequency Induction Heater Furnace. With 100% load design, can work in 24 hours without stop. Induction Heating Power 25 KW. if you need Single phase 220V, plz let us know. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the diathermancy.
NICE 15KW High Frequency Induction Heating Machine Heater Furnace DHL/Fedex - 15KW High Frequency Induction Heater Furnace. Oscillation frequency output 30-100KHZ. Tt is available for ultraviolet temperature detection. which can realize the automatic ciontol of temperature ,improve the heating performance and simplify the manual operation.
LASTEST 15KW High Frequency Induction Heating Machine Heater Furnace DHL/Fedex - 15KW High Frequency Induction Heater Furnace. Oscillation frequency output 30-100KHZ. Tt is available for ultraviolet temperature detection. which can realize the automatic ciontol of temperature ,improve the heating performance and simplify the manual operation.
GOOD 15KW High Frequency Induction Heating Machine Heater Furnace DHL/Fedex - 15KW High Frequency Induction Heater Furnace. Oscillation frequency output 30-100KHZ. Tt is available for ultraviolet temperature detection. which can realize the automatic ciontol of temperature ,improve the heating performance and simplify the manual operation.
NEW 15KW High Frequency Induction Heating Machine Heater Furnace DHL/Fedex - 15KW High Frequency Induction Heater Furnace. Oscillation frequency output 30-100KHZ. Tt is available for ultraviolet temperature detection. which can realize the automatic ciontol of temperature ,improve the heating performance and simplify the manual operation.
VWR Hybridization Oven Model 5400 230501v For Parts /Repair - Sale Includes: VWR Hybridization Oven Model 5400, 230501v. For Parts/ Repair. Function: This item is UNTESTED. Sold for parts/ repair. Powers on. No further testing was done. Power cord is NOT INCLUDED.
BEST 15KW 30~100KHz Dual Station Induction Heater Furnace Fast Shipping - 15KW Dual Station Induction Heating Machine. Weight(Gross). Current heating. Current Insulation. Input current. Cooling water pressure. Work Power. Wire material industry (annealing of wire material and sheet band).
Cole-Parmer StableTemp Digital Mechanical Convection Oven 52412-77 AS IS - This item functions properly as a convection oven for the lab. The door and seal could both easily be replaced or this unit could easily be used for spare parts. This item is sold. The dual-wall door opens 180° for greater access to the chamber.
I Squared R U68x48x17.5x1.25 U Type Starbar - The LRE (low resistance ends) have a high (15:1) electrical resistance ratio to the hot zone section. The electrical connections are made using flat aluminum braids held in compression to the circumference by a stainless-steel spring clamp.
Portable 220V 6KW Ultrahigh Frequency Induction Heater Furnace 100~200KHZ - Portable Ultrahigh Frequency Induction Heating Machine 6KW. This item only has 220V single phase 50-60HZ. Output Oscillation Frequency 100-200KHZ. Duty cycle >80%(30℃ room temperature). This machine is specially designed for soldering of diamond impregnated cutting and grinding tools which includes.
HOT SALE 220V 6KW Ultrahigh Frequency Induction Heater Furnace 100~200KHZ - Portable Ultrahigh Frequency Induction Heating Machine 6KW. This item only has 220V single phase 50-60HZ. Output Oscillation Frequency 100-200KHZ. Duty cycle >80%(30℃ room temperature). This machine is specially designed for soldering of diamond impregnated cutting and grinding tools which includes.
220V Portable 6KW Ultrahigh Frequency Induction Heater Furnace 100~200KHZ NEW - Portable Ultrahigh Frequency Induction Heating Machine 6KW. This item only has 220V single phase 50-60HZ. Output Oscillation Frequency 100-200KHZ. Duty cycle >80%(30℃ room temperature). This machine is specially designed for soldering of diamond impregnated cutting and grinding tools which includes.
NEW 220V Portable 6KW Ultrahigh Frequency Induction Heater Furnace 100~200KHZ - Portable Ultrahigh Frequency Induction Heating Machine 6KW. This item only has 220V single phase 50-60HZ. Output Oscillation Frequency 100-200KHZ. Duty cycle >80%(30℃ room temperature). This machine is specially designed for soldering of diamond impregnated cutting and grinding tools which includes.
Lab Drying Oven Electric Constant Temperature Blast Drying Oven 220v 30L FAST - Temperature range: RT+10~200℃ (RT+10℃~250℃ for option). Temperature Stability: ±1℃. Temperature uniformity: ±3% (testpoint is 100℃). Ambient Temperature: RT+5~40℃. Timing Range: 1 - 5 999min. We will do our best to help solve the problem.
Shandon Lipshaw Therma-Centre 70 - The sale of this item may be subject to regulation by the U.S. Food & Drug Administration & state & local regulatory agencies. No warranty applies after acceptance.
SalvisLab SwissTEQ Vacucenter VC50 - AS IS - The SalvisLab Vacucenter is the optimal solution for oxidation-sensitive substances and thermally instable products. It provides precise thermal conditions in dust-free vacuum atmosphere. The SalvisLab Vacucenter is renowned for its compact formfactor, reliability and durability.
Lab Forced Air Drying Oven 250°C 14×14×14" - Force air DRYING OVEN. Uniformity Forced Air: 2.5% Thermostatic: 3.5%. Cold rolling steel electrostatic spraying exterior, novelty and nice. Exterior Size. Digital display of temperature inside makes read easily.
high quality Lab Forced Air Drying Oven 250°C 14×14×14" New - Force air DRYING OVEN. Uniformity Forced Air: 2.5% Thermostatic: 3.5%. Cold rolling steel electrostatic spraying exterior, novelty and nice. Exterior Size. Digital display of temperature inside makes read easily.