Termotron S-1.2C Mimi Max Environmental Temperature Test Chamber - Termotron S1.2 Mimi Max Environmental Temperature Test Chamber. Used in great shape was working when pull out of company. We can crate and put on skid drop at your shipper distrudtion center in MN.
Thermotron CDS-5 Cytogenetic Drying Chamber Hood - OEM: Thermotron. Freight quotes will be provided promptly upon request, or one can select Local Pickup and manage the transportation pickup and expense directly. Local Pickup Weight (lbs): 250. Twinsburg, OH 44087.
Thermotron - Temp Range -73 to 177 degrees celcius.
G181865 Delta Design 3900 CS Chamber w/Watlow 942 Control - "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Is there a Dock or Forklift available?.
C181648 Tenney Benchmaster BTC Environmental Test Chamber (208VAC, 1Ph) - This is the extent of my testing of this chamber, and it is being sold as-is. I'm not sure if they chamber is having any other problems. Is there a Dock or Forklift available?. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Tested/Warranty: Blue M Temperature & Humidity Environmental Chamber -18C to 93C - The chamber uses 208 Voltssingle phase 60 Hz power. very low service hours – about 10 months (6,835 hours). The chamber has a. humidity range of 10% to 98%. Different temperatures with different humidity levels were tested, including 81.
Cincinnati Sub-Zero ZH-16-2-2-H/AC ZJ9732706 Environmental (-77°C to 177°C) - Make: Cincinnati Sub-Zero. Temperature Range -77°C to 177°C. Model: ZH-16-2-2-H/AC. Options: 208, H, AC, DAP, W, PH6, F4, PH3, PH6x2.5. Workspace 16.00 cubic feet (30" w x 30" h x 30" d). Humidity Range Humidity Range 20% RH to 95% RH.
Thermotron SE-300-2-2 28910 Environmental Test Chamber, (-70C to 170C) - Make: Thermotron. Thermotron Temperature Test Chamber Model #SE-300-2-2. Temperature Range: -70 to +170 Deg. C (Air Cooled). Over and Under Temperature Protection. Item Specifics/Condition. O.D. 38"W X 67"D X 77"H.
Thermotron SE-300-2-2 29018 Environmental Test Chamber, - Make: Thermotron. Thermotron Temperature Test Chamber Model #SE-300-2-2. Temperature Range: -70 to +170 Deg. C (Air Cooled). Over and Under Temperature Protection. Item Specifics/Condition. O.D. 38"W X 67"D X 77"H.
Thermotron SE-300-2-2 27201 Environmental Test Chamber, - Make: Thermotron. Thermotron Temperature Test Chamber Model #SE-300-2-2. Temperature Range: -70 to +170 Deg. C (Air Cooled). Over and Under Temperature Protection. Item Specifics/Condition. O.D. 38"W X 67"D X 77"H.
Abbess High Vacuum Storage 5 Chambers 24 cube system - We can take your product, in-situ, all the way from cleansing through to its degassed, and even cured, state · With the addition of our liquid feedthroughs and thermal plates, this large-capacity, top-loading, semi-automated vacuum system allows for degas, dose, and thermal-cure processing.
Thermotron WP-393-THCM2-10 Panel Walk-In Chamber -34°C to 85°C - Make: Thermotron. Thermotron WP-393-THCM2-10 Panel Walk-In Chamber. Thermotron panel Walk-In chambers are made from lightweight panels for fast and easy installation. Locating pins ensure an accurate it and the “cam over center” locks securely join panels in place.
Thermotron WP-1632-CHM30-30-LH Panel Walk-In Chamber - Make: Thermotron. Thermotron panel Walk-In chambers are made from lightweight panels for fast and easy installation. Locating pins ensure an accurate it and the “cam over center” locks securely join panels in place.
ESPEC PL-2FPH Environmental Temperature & Humidity Test Chamber - Make: ESPEC. Humidity Range: 20-98% from 70C to 85C. Temperature Range: -40C to +150C. Temperature Heat-up rate: -40 - + 150"C, within 70 minutes. Temperature Consistency: ± 0.3°C (below 100°C). Temperature Pull-down rate: + 20 - -40"C, within 60 minutes.
BMA Bryant AT-102XS Temperature Test Chamber - Make: BMA Bryant. BMA Temperature Test Chamber Model AT-102XS. Temperature Test Chamber. Temperature Range: -35 to +170 Deg. C (Air Cooled). I.D. 15"W X 15"D X 14.5"H.
Thermo Scientific/NESLAB CFT-25 Chiller - The Thermo Neslab CFT-25 Refrigerated Recirculator is a CFC-Free refrigeration system to provide the ultimate solution to the earth's ozone problem. This system eliminates on/off cycling and premature wear of the compressor.
Thermotron SE-1000-3 Environmental Chamber 29448 - Make: Thermotron. Consult an application engineer if hazardous materials are involved. Climatic Chamber performance is based upon laboratory ambient conditions of 23.9°C, and may vary slightly. Custom window sizes are available.
Thermotron SE-1000-3 Environmental Chamber 27178 - Make: Thermotron. Consult an application engineer if hazardous materials are involved. Climatic Chamber performance is based upon laboratory ambient conditions of 23.9°C, and may vary slightly. Custom window sizes are available.
Thermotron SE-1000-3 Environmental Chamber - Make: Thermotron. Consult an application engineer if hazardous materials are involved. Climatic Chamber performance is based upon laboratory ambient conditions of 23.9°C, and may vary slightly. Custom window sizes are available.
Despatch LCC1-54NV-2 Clean Room, Controlled-Atmosphere Oven - Fresh air and nitrogen (noted with an N suffix) models are available. Make: Despatch. insulation side to protect the work chamber from contamination and to permit chamber. (nitrogen models only). - Nitrogen operation (N and NV models only).
Tenney TJR 2704410 Environmental Test Chamber - Make: Tenney. Temperature Range: -75c to +200c. Ambient to -75°C Ultimate. Ambient to -73°C 55 minutes. Ambient to -65°C 40 minutes. Ambient to -54°C 30 minutes. Ambient to -40°C 20 minutes. Ambient to -15°C 10 minutes.
ESPEC ETS04-3SW 254313 Thermal Shock Chamber (-75⁰C ~ 200⁰C) AS-IS - Make: ESPEC. This ESPEC Thermal Shock Chamber is currently not in working condition as it sits. There are a few issues with the thermal shock chamber, including a broken compressor and there is a possible issue within the programing of the machine to where it does not shut off the compressors when it reaches the desired temperature, causing them to overheat and malfunction the shock chamber.
Sigma System M-26 Temperature Chamber with model C controller. Coolant: CO2 - Sigma System M-26 Temperature Chamber with model C controller. Overtemp failsafe adjustment. 120 VAC. 50/60 Hz. 15 Amps. Coolant: 300 psig CO2. Operating temperature range: -60 deg. C to +199 deg. C. The custom power supply for DUTs (Devices Under Test) in the chamber, ribbon cables and connector can be removed upon request. Item overall dimensions (net, approx.): 22 1/8"x28"x14 1/4". Chamber interior dimensions (approx.): 14.5"x10.5"x11".
Thermotron S-16 Mini-Max S-16C Environmental Temperature Test Chamber 16 cu. ft. - Thermotron S-16 Mini-Max S-16C Environmental Temperature Test Chamber 16 cu. ft.. Lightly used working chamber. Used about 100 hours in last 8 years. Recently tested. See decal for manufacture date and power requirements. Ignore ship info in this posting. It will go freight. Estimate provided if interested. 16 cubic feet. (30” x 30” x 30”)-73 to 177c
Nuaire NU-S425-600 Fume Hood / Biological Safety Cabinet 115V - • Local pick up. We think good. When we receive the product we will confirm item is. Let us know what’s going on. are more than happy to rectify any problems by replacing. received in a different condition than stated (DOA, not. ).
Thermotron Environmental Chamber with FastTRAC model 620 JC Systems control+Book - Thermotron Environmental Chamber with FastTRAC model 620 JC Systems control with manual. Came out working, In good physical condition. I'm sure needs attention and calibration prior to new operation. Sold as is. Freight will need to be set up by buyer, we can help load. Absolutely no return, please make sure this unit is correct for your application before buying, it is VERY heavy. Thanks for looking.
Sigma Systems S/N 3710 - New - This is being sold as a personal item. What you see is what you get. Be sure to refer to pictures in regards to the specific item for sale.
Thermotron CDS-5 Cytogenetic Environmental Chamber SEE NOTES - Thermotron Manufacturer Thermotron Item Condition Missing panel and chamber glass. Item(s) will have a 4"x2" internal inventory label, see pictures. Does Not Apply Manufacturer Part Number Weight (lbs): 504.00.
Nuaire NU-S425-600 Fume Hood / Biological Safety Cabinet 115VAC - • Local pick up. We think good. When we receive the product we will confirm item is. Let us know what’s going on. are more than happy to rectify any problems by replacing. received in a different condition than stated (DOA, not. ).
Sanyo MLR-351H Versatile Plant Culture Environmental Test Chamber 294L 50C 115V - Unit fully powers up and display reads clearly. Buttons are responsive. We were able to run a few cycles and unit successfully reached the temperature we set. The platic coating for the wire rack/shelf shows wear and tear, see photos for detail.
Honeywell Environmental Specialties Chart Recorder Model DR4300 - This unit was previously utilized at a public US institute, and saw routine technical support. This item was taken out of service in working condition, however we, as the third party, are unable to test this unit's full functionality first hand. Please view the photos above for more insight, or message us regarding your questions prior to purchasing for full satisfaction.
Thermotron SM-8C Digital Temperature/Humidity Environmental Chamber - Manufacturer THERMOTRON. (1) Thermotron therm alarm system. Categories Humidity Chambers, Production Chambers, Temperature Humidity Chambers. Humidity Range 20% to 95%. Humidity Range: 20% to 95%. Temperature Range -70°C to 170.0°C.
Ransco 7207-1M Temperature Humidity Chamber -70°C to 200°C - If the item is listed as working, then it was tested to the best of our ability. Unless a resale certificate is provided. WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING PRODUCTS AND SERVICE. This item is as seen in pictures.
Coy Lab Products Vinyl Anaerobic Chamber Model- AALC - Used, in good cosmetic condition with some scuffs, scratches and staining from normal use and storage. Unfortunately we did not receive any gloves for this chamber. We had to seal of the holes where the gloves attach so we could pressurize the chamber and for any leaks. We did not find any holes in the vinyl whatsoever. Unfortunately we do not have a vacuum pump, oxygen or nitrogen to fully test this unit. We are very confident after our inspection that this chamber will function properly. The heated incubation chamber was fully tested to heat and comes with 2 shelves. Unfortunately one of the glued on handles to the door is missing.
Lab-Line Environmental Plant Growth Chamber Fan Temperature Lighting Control Box - Has a bit of rust marks inside. Missing 1 of the florescent bulbs. Removable 4" Deep Water Collection Tray in Bottom w/ Outside Drain Spout Access. (3) Incandescent Bulbs Standard Size Socket (Blue Red & White are included)LED bulbs could be used as well.
Thermotron 7800CM 1045778B Environment Test Chamber Control Module Circuit Board - The board appears to have been mounted as there are indications of a lock washer but the cover was never installed (no indications on 6 of the 8 screws, screws in a bag). We do not know if this was mounted during testing or assembly but our information was that it is a new part.
Thermotron SE-600-10-10 35608 Environmental Chamber (-70ºC to 180ºC) - Make: Thermotron. Inlet Water Gal / Liters per Minute 13ºC / 55ºF: 6 / 23. Inlet Water Gal / Liters per Minute 29ºC / 85ºF: 16 / 60. Inlet Water Gal / Liters per Minute 18ºC / 65ºF: 7.5 / 28. Heating Performance in Minutes -65º to 180ºC: 19.
Thermotron SE-300-4-4 34878 Environmental Chamber - Make: Thermotron. Climate Chamber performance is based upon laboratory ambient conditions of 23.9°C, and may vary slightly. Custom window sizes are available. Air-cooled indicates that an onboard condenser is standard and a water-cooled condenser is optional.
Thermotron SE-600-6-6 Environmental Chamber for Repair - Make: Thermotron. Temperature Range: -70ºC to 180ºC. Unit needs repair, sold as-is! (-94ºF to 356ºF). Model: SE-600-6-6. Temperature Uniformity: ±0.5ºC (±0.9ºF).
Anaerobe Systems AS-580 Gloveless Anaerobic Chamber 120VAC - The unit has also been tested in our facility for power on only. If the item is listed as working, then it was tested to the best of our ability. This item is as seen in pictures.
Tenney T20C-4 40128 Environmental Test Chamber, -73C to 200C, - Model: T20C. Make: Tenney. Automatic defrost for door gaskets. Temperature & Humidity: -73°C to +200°C. Workspace (W x D x H): 30" x 32" x 36". Low water protection. Non-corroding parts on all humidity capable units.
Thermotron S1.2 Mini Max Environmental Temperature Test Chamber 13339S - Make: Thermotron. Benchtop Chambers provide superior performance over a wide range of applications. Engineering ecpertise assures optimum temperature change rates. Engineering expertise assures optimum temperature change rates.
ESPEC PSL-4FPA Temperature & Humidity Chamber - 20-98% Relative Humidity.Overall unit is very clean inside and out with a clear window. Includes Manuals. Has 7100 Hours on it. Unit was unplugged in December 2021. Excellent working Unit.
Delta 9023 23282 Environmental Chamber - Model: 9023. Make: Delta. Temperature Range. Air Circulation : Vertical air flow pattern. LCO2 Consumption : 5.6 lbs/hr at -53°C (-65°F). Cool-down Rate : 31°C / Minute. Heat-up Rate : 24°C / Minute. OPTION -184°C (-300°F) With optional LN2.
ESPEC PXA-4AP Temperature & Humidity Chamber READ!! - All parts are there except the new heater. Overall unit is very clean inside and out with a clear window. I have a loading dock and a forklift and can assist in loading. Temp Range -70 to 150 Degrees C. 3 Phase 230V.
Tenney JR Environmental Test Chamber - Make: Tenney. Temperature Range: -75c to +200c. Ambient to -65°C 40 minutes. Ambient to -54°C 30 minutes. Ambient to -40°C 20 minutes. Ambient to -15°C 10 minutes. Ambient to 25°C 0 minutes. Ambient to 70°C 10 minutes.
Temptronic TPO4100A-1 Thermosteam Thermal Inducing System -20°C to 225°C - Thermosteam Thermal Inducing System Temperature Range -20°C to 225°C. Make: Temptronic. Create up to 10 ramp/soak/cycle thermal test routines. Handheld thermal wand for flexibility in bringing temperature to device; optional bench stand for hands-free operation.
Thermonics T-2500E Temperature Forcing System, -80C to +225C - Make: Thermonics. Thermonics T-2500E. Temperature Forcing System. Temperature Forcing System T-2500 products are ideal for temperature cycling per MIL STD-883C for thermal stressing of semiconductor devices.
ESPEC ETS4-2SW Two Zone Thermal Shock Chamber - Refurbished! - Espec ETS4 is a Two Zone Thermal Shock Chamber. Make: ESPEC. Two Zone Thermal Shock Chamber. Refrigerant Type R507 & R508. Dual 7.5 HP compressors. Input Power: 460V, 3Ph, 90A. Temperature Range: -75C to +200C.
Tenney BTRS Environmental Test Chamber with Humidity, -34C to 200C - Model: BTRS. Make: Tenney. These well-received test chambers are capable of simulating a wide range of temperature and humidity conditions. Humidity Range: 20% to 85% RH. Temperature Range: -34 to +200 deg C.
ESPEC EWST80-CCW Large Environmental Chamber, Fast Ramp, Thermotron AGREE - Make: ESPEC. Temperature Gradient ±2°C (±3.6°F), empty chamber after stabilization. Exterior Chamber. 15C per minute ramp rate. Interior Room. From -40 to 85°C within 8.3 minutes. From 85 to -40°C within 8.3 minutes.
Thermotron SM-8C 29451 Environmental Test Chamber with Humidity, - Make: Thermotron. Humidity Range Humidity Range 20% RH to 95% RH. Temperature Range -77°C to 177°C. Workspace 8.00 cubic feet (24" w x 24" h x 24" d). Item Specifics/Condition. Options: W, 208, H, AC, PH2, 2800.
Tenney T20C Environmental Test Chamber, -73C to 200C 29004 - Model: T20C. Make: Tenney. Automatic defrost for door gaskets. Temperature & Humidity: -73°C to +200°C. Workspace (W x D x H): 30" x 32" x 36". Low water protection. Non-corroding parts on all humidity capable units.
ESPEC EWST80-CCW 3213608 Low Temperature Walk In Chamber (-50 to 100°C) - Make: ESPEC. Temperature Gradient ±2°C (±3.6°F), empty chamber after stabilization. Exterior Chamber. Temperature Range -50 to 100°C (-58 to 212°F). Temperature Performance. From 85 to -40°C within 8.3 minutes.
Sun Systems EC01 Environmental Chamber, 12"x10.5"x9.75, -73 C -315 C - Model: EC01. The chamber has a temperature range from -184°C to 314°C (using LN2) or -73°C to 314°C (using LCO2) and may be equipped withoptions such as 1" to 4" circular ports, shelves, electronic failsafe, hinged and window doors.
Thermotron SM-32C Environmental Test Chamber with Humidity - Make: Thermotron. Humidity Range: 20% to 95% Relative Humidity. Temperature Range: -70 to +170 Deg. C (Air-Cooled). PICTURED IS A SAMPLE UNIT, ANY UNIT WILL BE IN IDENTICAL OR BETTER CONDITION .
Thermotron S1.2 Mini Max Environmental Temperature Test Chamber - Make: Thermotron. Benchtop Chambers provide superior performance over a wide range of applications. Engineering expertise assures optimum temperature change rates. It conveniently plugs into a 110 Volt outlet.
ESPEC ETS4-2SW 25039201 Two Zone Thermal Shock Chamber - As-is - Espec ETS4 is a Two Zone Thermal Shock Chamber. Make: ESPEC. If item is subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. It will need repair. Sale is as-is.
ThermoFisher Scientific SL8 Small Benchtop Centrifuge (No Rotor) - Model: SL8. Maximized swing-out capacity up to 8 x 50mL conical tubes, 24 x 5/7mL blood tubes, microplates and microtubes, all in one versatile centrifuge. This Centrifuge also features Ensure a peaceful laboratory with low noise levels, including just 52 dBA at performance of 17,850rpm/ 30,279 x g (with SL 8R centrifuge).
VWR Scientific True GDM-49 Two Sections Display Freezer W/Swing Doors Model GD - Series GDM Series. Door Design Swing. Sections 2. Compressor Location Bottom. What you see in the photos is what exactly you receive. If it's not pictured it's not included. Mistakes may happen and might go above and beyond to resolve any issues.
Tenney TUJR Junior Environmental Test Chamber - AS IS - Unit powers on, and watlow temp controller Series 942 comes on for a few seconds and then shuts off completely. The alarm sounds on the TempGard IV side and it throws error 2 on the Watlow 93 meter. For this reason, we are selling the unit AS-IS for parts/repair as a non-working or incomplete unit. We have not tested any further, item may have unknown issues we are not aware of. See all item photos for the condition of the unit. The unit is on hand and ready to ship. Please feel free to message us with any questions you may have. Thank you for checking out our listing. .
Eurotherm 940D Temperature Controller 900 EPC Mattson 514-08358-00 w/Manual New - Includes factory manual and pictured accessories. The physical condition is great. Mattson Technology Part No: 514-08358-00. Model No: 900 EPC. Input 1: LP1/IC/PAC//AAB//0/10/V/0/1200/C/00. Part No: 940D/LP1/IV/PDV//ADR/LP2/IV/PDV///VH/XS/LE///.
VWR Model 1500E Bench Top Incubator +5 to 70°C, 1 Cu Ft., 120V - The unit has also been tested in our facility and found to be in good working condition. If the item is listed as working, then it was tested to the best of our ability. WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING PRODUCTS AND SERVICE.
Ets-Lindgren Basic 2X2X2 Enclosure Pn 1696268-12 Free Shipping - No EXPORT of any kind. We reserve the right to cancel the sale based on suspicion of export via individual or third party. We deal in military surplus (Mainly 2-way radios and various other communication and electrical systems.).
Technical Associates FM7-ABNI Air Monitor MGA-5P FIL-7D - For Parts - Detector canister. Tech Associates. It may be used to monitor stack effluent down to EPA levels as well as hoods, glove box or workplace air. Iodine Air Monitor System For Parts. Included inside the monitor.
Laboratory Environmental Test Chamber 28" X 18" X 27" 0-90°C 1PH - We are happy to accommodate, but thismust be taken care of. We think good. has been made. received in a different condition than stated (DOA, not. different condition than stated in the ad. If your item is. ).
Cincinnati Sub-Zero CT-27-2-2-S/AC Environmental Test Chamber - Cincinnati Sub-Zero CT-27-2-2-S/AC 440 Volt 3ph Inside chamber measures 36" x 36" x 36". We put power to this unit and the fans and the compressor started but I do not know how to operate the temperature controller. Contact us for a freight quote or set up your own Skid size is 68" long 66" wide 97" tall 1750 lbs. .
MAN TURBO SURGE CARD/OVS-TEST 482107 OVS TEST SWITCH SRGOVS/30/49 New - 482107 OVS TEST SWITCH. MAN TURBO SURGE CARD/OVS-TEST. ( A new, unused item with minor signs of wear. Furthermore, any noticeable issue will describe with the item specification above before this portion. ).
Espec TPC-412MD HAST Highly Accelerated Stress Test Chamber - 1 Each | Box of Fine Wick for ESPEC chambers. Battery Test. Materials Test. Item will be made available for pick up at our San Diego, CA, USA location by the carrier you arrange transportation with.
Q-Lab XE-1-B 25-50°C Dark/45-90°C Light Black Panel Xenon Arc Test Chamber - Q-Lab XE-1-B Q-Sun 25-50°C Dark/45-90°C Light Black Panel Arc Chamber, 9.9Dx18W", 208V 1ø 60Hz 12A. Item will be made available for pick up at our San Diego, CA, USA location by the carrier you arrange transportation with.
Tenney TTC-112350 Ten Environmental Chamber AS-IS NOT Fully Functional! - Manufacturer: Tenney Engineering, Inc. Condition:For Parts or Not Working. The switch chamber light is broken. One of the compressors is visibly stained from an oil leak. There are large flakes of paint coming loose on the bottom of the compressor mounting panel, and these are covering big rusty areas on the panel.
Tenney T6C-1.0 6 cu. ft. -73°C to +200°C Environmental Temperature Test Chamber - Tenney T6C-1.0 6 cu. Specifications are from Tenney and may vary slightly due to upgrades, options, or revisions this unit may or may not have. Uniform conditions are assured through the use of a vertical-down recirculating conditioning system.
Norlake BOD Incubator with Heating/Cooling with Warranty SEE VIDEO - Applications such as BOD assays, testing shelf life and drug stability, plant growth and tissue culture studies, chromatography tests, genetic studies, and more. Norlake Stability Test Chamber ID 13889.
Blue M VO1218SA 40 - 260°C 1.5cu-ft Vacuum Oven, 12"Wx18"Dx12"H - Item will be made available for pick up at our San Diego, CA, USA location by the carrier you arrange transportation with. Power Supplies. 2 Each | 3-3/4" Shelf Assembly for V01218SA. 1 Each | 7/8" Shelf Assembly for V01218SA.
Satec Creep rupture furnace -120 to 350 deg F model FO-3 NO CONTROLLER - The chamber is in good condition and the interior insulation shows no signs it was ever overheated. MFG: SATEC System Inc. -120 to 350 Deg F (-38 to 177C). Volts: 120. With these two sources of information you will have as much information as possible without being physically here to inspect the machine.
WEISS WT 120/70 Test Chamber (5/22) - Item: WEISS WT 120/70 Test Chamber. Model Number: WT 120/70. Temp range -70 to +180 C. Cool down rate: 2.0 K/min. Heat up rate: 2.0 K/min. Local pickup is available in San Diego. This item is USED.
ESPEC EML4-7PWC Environmental Laboratory Test Chamber, -40 Deg. C to 150 Deg. C - Used test chamber as seen in the images. This unit was fully functioning until it was powered off in 2019. The unit has been powered off since them. Unit is located in Elkhart Indiana. If you are not able to pick up locally, we are able to get competitive freight quotes as well.
NAPCO National Appliance 5851 Vacuum Oven / Power On Only - This item has been tested to power on only. We could not perform a full function test on this item. No other accessories will be included unless otherwise stated. See pictures for more details.
Blue M WSP-109C-3 Dual Thermal Shock Chamber oven - Blue M WSP-109C-3 Dual Thermal Shock Chamber. A local business no longer needed this equipment and we hate to see it sit. Shipping can be arranged by buyer and we will assist in loading.
THERMOTRON SE*300 S/S SHELF used - THERMOTRON SE*300 S/S SHELF used. Stainless steel We can make new shelves (any size) , double frame, or sway bars for extra support.
Cincinnati Sub Zero CT-64-3-H/AC Environmental Test Chamber (Temperature Only) - Chamber: 4'W x 4'H x 4'’D. The photos provided are of the actual chamber. You will only receive what is actually shown in the photos. Therefore, we are not familiar with all the parts or accessories that would be included from the manufacturer.
Tenney BTC Benchtop Environmental Test Chamber -70C to 200C USED (9088)R - Tenney BTC Benchtop Environmental Test Chamber -70C to 200C USED (9084)R In fair cosmetic condition. Has a few minor scuff marks. Powers on, digital screen and buttons respond well to input. The chamber reaches temperatures ranging from -69C to 200C. See pictures for more detail. Manufacturer: Tenney Model #/ Model: BTC Specifications: Temperature Range: -70ºC to 200ºC Power Requirements: 208V / 1PH / 60Hz Options Included: GN2 purge system Viewing window Interior Lighting Redundant thermal protection and alarm system Dimensions: Actual Weight: Workspace Dimensions: 20x20x22" Outside Dimension: 65x34x38" Shipping Dimensions: Shipping Weight: Crating Fee: Ask for a Quote.
Espec EZO30-WA 10-60C Temperature/Humidity Stability Environmental Chamber AS-IS - (1) Espec EZO30-WA. Manufacturer: ESPEC. Notes:This chamber is in PARTIAL working condition. We were able to run it all the way to the maximum high temperature and humidity. We found in later testing that it is able to increase the humidity, but NOT able to decrease humidity.
Tenny TUJR Test Chamber (6/22) - Item: Tenny TUJR Test Chamber. Model Number:TUJR. - Temperature Range: -70 to +170 Deg. C - Air Cooled. Local pickup is available in San Diego.
Sigma Systems M600MMC3.5 -100° to 200°C Cryogenic Temperature Chamber - Sigma Systems M600MMC3.5 -100° to 200°C Cryogenic Chamber, 34Wx29Dx35H", 208V 1ø 60Hz. 1 Each | Rack, oven, for Sigma M600. Item will be made available for pick up at our San Diego, CA, USA location by the carrier you arrange transportation with.
Environmental Chamber Humidity Cabinet - Arm : Counter balanced pantographic arm with 320 degree rotation. Vertical Range of Counter Balanced Arm : 250mm to 300mm. -10 to 50degC (14 to 122degF). DC / 150mA Max. Power Consumption. 1 Vp-p / 75 Ohms.
Bio Dynamics Model 4405 Small Environmental Chamber 35 Degree Celsius Unibac - Bio Dynamics Model 4405 Small Environmental Chamber 35 Degree Celsius Unibac. This is a light weight plastic environmental chamber set at 35 degrees Celsius. It maintains a perfect temperature. Condition is "Used". Shipped with USPS Priority Mail or FedEx depending on shipping destination.*** Free shipping does not apply to Hawaii, Puerto Rico, Guam or Alaska. No overseas shipping ***
Barnstead Thermolyne D5835 DI Water Cooling Varian 115689001 Rev. 5 Surplus - Part No: D5835. Varian Ion Implant Systems Part No: 115689001, Rev. 5. This Barnstead Thermolyne D5835 DI Water Cooling is used working surplus. The physical condition is good, but there are signs of previous use and handling.
Barnstead Thermolyne D5835 DI Water Cooling Varian 115689001 Rev. 6 Working - Part No: D5835. Varian Ion Implant Systems Part No: 115689001, Rev. 6. This Barnstead Thermolyne D5835 DI Water Cooling is used working surplus. The physical condition is good, but there are signs of previous use and handling.
Bryant Manufacturing BMA ECL - 10 Environmental Test Chamber Low/High Temp - The model ECL - 10 is a low temperature / high temperature test chamber that has 10 cubic feet of working space. Unit is located Glendale Heights, IL. for pickup. 24" wide, 24" deep, 30" tall. 37" wide, 36" deep, 52" tall.
Wolf Sub-Zero Dual Fuel Range 30" Kickplate - If the item is listed as working, then it was tested to the best of our ability. WE LOOK FORWARD TO PROVIDING YOU WITH OUTSTANDING PRODUCTS AND SERVICE. Unless a resale certificate is provided.
ESPEC BTL-433 Criterion Temperature Humidity Chamber ~ Repair - ESPEC BTL-433 Criterion Temperature Humidity Chamber Serial# 0613676. This chamber has been tested and found to be in non working condition. Could be a great source of parts for your current chamber!
Komatsu 20001920 Thermo Module MCU-02TM TEL Lithius Interface Block IRAM Working - Part No: 20001920. This Komatsu 20001920 Thermo Module is used working surplus. The physical condition is good, but there are signs of previous use and handling. Komatsu Module Part No: BAAA161800. Komatsu PCB Part Part No: 30005300, CADK0036.
Cincinnati Sub Zero CTS-16-5-5 Thermal Chamber - Condition is "Used". I do not have 460V to test or operate the chamber, so condition is as-is. Stainless Steel Interior and Exterior; Window in Door;.
Thermotron SE 600 Stainless steel Wire Rack - Thermotron SE 600 Stainless steel Wire Rack. Condition is "New". We can make new shelves (any size) , double frame, or sway bars for extra support.
Tabai Espec MC-81 Mini-Subzero Ultralow Temperature Chamber -85°-180°C w/THP-811 - This is a very nice Tabai Espec Ultra Low Temperature Test Chamber. Working temperature range is rated for -85°C to 180°C. Includes the matched THP-811 Monitor and Programming Unit. Operates on either 208 or 220 VAC, 3 phase, pulling about 12A.
Caron 6011-1 Environmental Test Chamber Refrigerated Incubator New - Temperature Range Work Space The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Model Number Serial Number Number of Shelves Included.
Tenney Jr Temperature Test Chamber W/ VersaTenn II and Temp Guard III - This Temperature Chamber has been tested working onsite and is guaranteed. The unit is in fair condition and has heavy wear from previous use including blemishes, scuffs, and scratches. Also, the controller buttons are worn. The wear is only physical and does not affect the functionality of the unit. Includes only the Temperature Chamber, VersaTenn II and Temp Guard III. No additional accessories. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us any questions you may have. Thank you for checking out our listing.
Blue M FRP-13B Full Range Programmable Humidity Chamber - Tested working onsite and is guaranteed fully function. Cosmetically has wear from previous use including scuffs and scratches. Includes Humidity Chamber as pictured. No additional items or accessories are included. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have. Thank you for checking out our listing. .
Blue M FRP-13B Full Range Programmable Humidity Chamber - See Details - Tested working onsite and is guaranteed fully function. Set for 86c and it got up to 82c in a couple of hours. The recorder moves but the ink is out. Cosmetically has wear from previous use including scuffs and scratches. Includes Humidity Chamber as pictured. No additional items or accessories are included. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us with any questions you may have. Thank you for checking out our listing. .
Edwards Y14204000 TMS Temperature Management System No Decal Working Surplus - Part No: Y14204000. The side interface panel is missing the decal and the plastic surround on the circuit breaker is broken but this does not interfere with normal operation (see photos). The physical condition is good, but there are signs of previous use and handling.
Espec SH-241 Benchtop Type Temperature & Humidity Chamber - Humidity range: 30% to 95%RH per humidity chart, ±3% fluctuation. Chamber Design Features Removable humidity water tank. Temperature range: -40°C to 150°C, ±0.3°C fluctuation to 100°C. Unit was removed from a fully functioning lab.
Figaro Engineering 120V Gas Sensor Test Chamber SR3 - This compact bench-top test chamber from Figaro for use in the evaluation and testing of gas sensors. Main material of chamber: Acrylic resin. Ideal for quick testing of gas sensors. Model Number: SR-3.
Hitachi EC2 TEMP Left Block Heater Temperature Module CTE11-01 M-712E Working - Part No: EC2 TEMP. This Hitachi EC2 TEMP Left Block Heater Temperature Module is used working surplus. The physical condition is good, but there are signs of previous use and handling. Removed from a Hitachi M-712E Shallow Trench Etcher.
Delta Design Precision Series Temperature Test Chamber 208 VAC - Serial#: 7203-4502. Internal Depth = 18" but 17" when the door is closed due to the insulation panel on the door. Provisions for cooling hookup (hoses coming out of the unit; seems it would be easy to change them out if needed).
Kinetics TJ-80C-2 FTS Systems Temperature Forcing System TURBO-JET - Kinetics TJ-80C-2 FTS Systems Temperature Forcing System TURBO-JET Tested As-Is. This Kinetics TJ-80C-2 FTS Systems Temperature Forcing System is used surplus. No further testing could be completed and is sold as-is.
C174178 Lot 2 Sigma Systems Thermal Platform Temp Controller (Delta DTB4848) - However, I do not have thermal platforms for them, so I have no way of powering them up or testing them, and they are being sold as-is. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
110V 110L Salt Spray Test Chamber for Corrosion Salt Fog Test Timing Function - The fog nozzle cannot spray the test liquid directly to the sample, the solution at the top of the spraying chamber cannot drop on the test piece. Salt spray testing chamber 110V. The concentration of the Sodium Chloride Solution should be maintained at 40~60g/L.
Environmental Chamber Humidity Cabinet - (Inner working chamber is made out of stainless steel. C ± 2°C and humidity from 55% to 95% ± 5% RH Temperature. Temperature & Humidity combined. ii) Microprocessor PID digital temp. below the unit.
Lunaire Limited Tenney TUJR Temperature Test Chamber (5/22) - Model Number:TUJR. - Temperature Range: -75°C - 200°C. - Internal Workspace: 15" x 11" x 11". Local pickup is available in San Diego. Serial Number: 27895-09. - Vapor tight interior made of 100% stainless steel.
Tenney T6RC Temp/Humidity Chamber, -70C to +170C w/ Synergy Controller - Tenney T6RC Temperature/Humidity Chamber, -70C to +170C, 230VAC 60Hz 23A Input, 22"x21"x23". 2 Each | Rubber Plug for T6RC. for Tenney Test Chambers. Item will be made available for pick up at our San Diego, CA, USA location by the carrier you arrange transportation with.
Thermotron Model SM-4S Mini-Max environmental chamber - This unit is in good condition. Cooling works good, down to -2.0C and probably lower (currently under testing), heating works good, up to 200C. - Back panel is missing (pic to follow). - The humidity system was not tested and believed to be non functional.
Satra 903 Environmental Ozone Test Chamber Cabinet - Make: Satra. Model: 903. Type: Ozone Test Chamber. The chamber is exactly as pictured. We do not have the ability to fully test the unit at our facilities. Manufacturer specs can be found at the below website.
ESPEC EWST80-CCW Large Environmental Chamber, Fast Ramp, Thermotron AGREE - Make: ESPEC. Temperature Gradient ±2°C (±3.6°F), empty chamber after stabilization. Exterior Chamber. 15C per minute ramp rate. Interior Room. From -40 to 85°C within 8.3 minutes. From 85 to -40°C within 8.3 minutes.
Low Humidity System- Model Lhs-300 (#3195) - For us to check rates, we need the following info: 1. 208-240 VOLT. Due to the size and weight, sold as is. We are quick to respond and resolve.
Envirotronics FLX900-2-3.5-AC-T-X Environmental Chamber - The order cannot be combined or modified after checkout has been completed. -Tested/Evaluated and Non-functioning. -Used Working. -Tested for Key Functions. R2/Ready for Resale -Used Fully Functional.
BEMCO Environmental Test Oven Chamber FTU 3.2-100/600 - Condition : This unit turns on and so do the fans. but we do not have the liquid nitrogen needed to properly test it. Our 30,000 Sq. Inventory ID: Floor. Exterior Height.
ASM 1058-637-01 Heater-Source 1 E730 220V 318W Heater Jacket Kit Watlow New - HEATER-SOURCE 1 E730 220V 318W. This ASM 1058-637-01 Heater-Source 1 E730 220V 318W Heater Jacket Kit is new surplus. The physical condition is great. Part No: 1058-637-01. Serial numbers or country of manufacture may vary.
Thermotron SE-300-2 Environmental Chamber *USED* - Used Fully Functional. The order cannot be combined or modified after checkout has been completed. -Used Working. -Tested for Key Functions. R2/Ready for Resale. The Actual item(s) shown in the picture(s)!
Blue M OV- 8A Stabil-Therm Gravity Oven - 1078 Blue M OV- 8A Stabil-Therm Gravity Oven. Condition is Used. Shipped with Fedex.Item is working. Priced lower becuase power cable needs replacing and interior needs deep cleaning.
Tenney T10RC-1.5 Environmental Chamber For Parts, -73°C to 200°C - Make: Tenney. Its quite clean inside and out as shown. This fee will vary depending on the size of the item. Cables for Automation. Heating/Cooling for Automation. Motors For Automation. Safety Hardware for Automation.
Tenney Engineering, Inc. TTRS Temperature Humidity Cycle Environmental Chamber - Tenney Engineering, Inc. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Are you the end-user of this item?. Used – Removed from Service in Working Condition – Been in Storage – Sold As-Is As Pictured – Sold For Parts or Not Working.
Tenney Engineering, Inc. TTC Environmental Test Chamber - Tenney Engineering, Inc. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. Model Number Serial Number Used – Removed from Service in Working Condition – Been in Storage – Sold As-Is As Pictured – Sold For Parts or Not Working.
Humidity chamber ,environmental chamber humidity control Fabricated Of Stainless - A reservoir water tank is provided which is fitted with float valve to maintain the water level in the steam generator tank. Chamber interior is fabricated of stainless steel with dull finish and exterior is of stainless steel / G.I. Powder coated.
And a Dirty little secret about Air Purification for Asthma, COPD or Virus - The way UV-C light air purifier’s work is quite simple. Depending on the material of the emitter (e.g., phosphor or quartz,) this light may be bluish or may not be visible to the human eye. Most importantly, the air scrubber process does not produce ozone, as verified by an independent ozone emission test report.
Giant Force Instrument GCT-17-40-SP Bench Top Temperature Chamber -40°C to 100°C - Chamber Capacity: ~ 0.62 cu. ft. (17.56 l). Convenient operation - Shift between fixed temperature and program. There are 3 modes; Hot, Cold and Stop for restarting the machine. Heat extraction from the top of the unit, which reduces the amount of space needed and allows maximum extraction efficiency.
Envirotronics Sh13-Rs Enviromental Chamber (#3106) - For us to check rates, we need the following info: 1. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Thermotron 7825 Controller #1035969 - Thermotron 7825 Controller. Condition is Used. Came from working ATS/320. Can be configured for any ATS model. #1035969
Tenney BTC Environmental Test Chamber,-70 to +170 Degrees, 208V 1 Phase 60 Hz - Here is a late model, excellent condition and all working Tenney Model: BTC Enviornmental Chamber. Operates on 208V 1 Phase 60H. Chamber dimensions 20x19x72. Unit shows very little use. Comes with manual and schematics. Includes one shelf, power cord, and pictured stand if desired. Chamber dimensions 20x19x72.
Vaisala HMT330 5L0A004BCAX100A01CGBAA1 Humidity & Temperature Transmitter HMT335 - Part No: HMT330 5L0A004BCAX100A01CGBAA1. This Vaisala HMT330 5L0A004BCAX100A01CGBAA1 Humidity and Temperature Transmitter is new surplus. The physical condition is great. Model No: HMT335. Serial numbers or country of manufacture may vary.
Thermotron 2800 Display - Thermotron 2800 Display. Condition is Used. In great working condition part # 753726
Thermotron 7800 Rack Mount Controller - Thermotron 7800 Rack Mount Controller. Condition is Used. Came from working Thermotron unit. In great condition. Part # 1033454
VAC Vacuum Atmospheric Chamber Alarm AA-1 - We have for sale a VAC Vacuum Atmospheric Chamber Alarm Model AA-1. (19 x 5 1/2 x 13 1/2"D). We do accept University PO's from all major Colleges and Universities in the USA, ONLY!
Barnes Engineering Company 19-003 Power Supply Variable Temperature Chamber - This Power Supply Variable Temperature Chamber has been tested working onsite and is guaranteed. The unit has wear from previous use including scuffs and scratches. Includes only the Power Supply Variable Temperature Chamber, and 0019-002. No additional accessories. Photos are of the actual unit for sale. Inventory is on hand and ready to ship. Please feel free to message us any questions you may have. Thank you for checking out our listing. .
^^ Mts 409.80 Temperature Controller Eurotherm & Watlow Controllers Built In (B) - We are quick to respond and resolve. We do not have power cords to provide unless they are attached to the item or unless stated that they are provided. If one is pictured it is for testing purposes only unless it is attached or stated that it will be included.
Terra Universal 300 Stainless Steel HEPA filtered Dual Vestibule Glove Box - Open-loop filtration module with ULPA HEPA filters. 31" overhead light accessible from outside the chamber. or palletize, shrink wrap for LTL carrier - FREE. You can use whatever carrier you want. We have a forklift and can load onto your truck FREE.
Polyvinylidene Fluoride PVDF Piezoelectric Film, 18 um t 200x280mm soft robotics - Uniaxially oriented PVDF piezoelectric film with thickness of 18 um, size 200 mm x 280 mm. d33 and d31 >24 pC/N. other thickness available upon request for different thickness. Piezoelectric PVDF & PVDF-TrFE film, from 3 um to 500 um thick.
Tenney TJR Environmental Test Chamber SN# 28047-05 - USED TENNEY SURPLUS MODEL TJR. ABOUT THE MANUFACTURER TENNEY. Watlow F4T Temperature Only. Withdraws: We are generally reasonable with requests for withdraws.
Input/power supply, 30755156-001, DC3003-0-10B-1-00-0111, Honeywell - MFG: Honeywell. With these two sources of information you will have as much information as possible without being physically here to inspect the machine. Location: R5BL. Condition: Used. Inventory #: 8137.
Thermotron Industries PR-CH-2 Environmental Test Chamber Host - Specifications are from manufacturer and may vary slightly due to upgrades, options, or revisions this unit may or may not have. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
4.5 ft Dia x 12 ft. L 190.1 Cubic Foot 6061 Aluminum Vacuum/Pressure Chamber - There is a black coating inside that I am not sure what it is material wise. Material: Aluminum 6061 (there is a paint/glue on the outside from where they had insulation attached). 2: 6" O.D. x 2.375" I.D. (on pipes that go to Side 2).
LACO Technologies VDS1218006HS 12" Dia x 18" D Vacuum Degassing Chamber System - Specifications are from LACO Technologies and for a VDS1218006HS (This has an X at the end, I believe it is the chamber lid type that is different) and may vary slightly due to upgrades, options, or revisions this unit may or may not have.
Temperature Chamber Cincinnati CT-12 -73 to 177deg C, CSZ, Needs refrig work - This is a used temperature chamber made by Cincinatti Sub Zero, model CT-12-2-2-LN2-H/AC. Temp range: -73C to 177C. With these two sources of information you will have as much information as possible without being physically here to inspect the machine.
Altitude Environmental Chamber Thermal Vacuum Chamber - Capabilities: 70,000 feet altitude, 100,000 structurally capable. (requires secondary pump). Location: St Petersburg, Florida. Will Export. Call us to discuss your application. Optional: DO160 rapid decompression / icing.
Tabai Espec, Circuit Board, 13178H1177Y2BP IO-STD-A - This is a used circuit board made by Tabai Espec, part number 13178H1177Y2BP IO-STD-A. Model: 13178H1177Y2BP IO-STD-A. MFG: Tabai Espec. With these two sources of information you will have as much information as possible without being physically here to inspect the machine.
Ransco Environmental Test Chamber Despatch 16635 Temperature & Humidity - Model 16635. We never needed it so never turned it on. Sold as is where is. We have a laoding dock and it's available for local pickup. Temperature range -73° to 177° W/O. Electric Heater Cap. 3 KW 1MM 4 KW AIR.