Stealth Storm Wind Turbine Blade Set 28 Inch (5 Pcs) Wind Generator Blades - Large ratio of tip section chord to root section chord and variable chord airfoil blade ensures rotor start-up easily and running smoothly with high torque & RPM at low wind conditions Aerodynamic blades designed with over-speed dynamic blade braking systems ensure the generator is well protected in higher winds.
Rectifier Three Phase for AC Wind Turbine Generator Heavy 100A Spade Terminals - Heavy 100 Amp Rectifier with Spade Terminals and Heat Shrink Includes: 1 - Heavy 100 Amp Rectifier 5 - Spade Terminals 3/8 Inch 0.375 UL Listed 5 - 1/2 Inch Heat Shrink Tubing (1 Inch Length) Heavy 100A Rectifier: ---Heavy quality rectifier intended for wind turbine rated for 100 amps continuous usage ---This item is used to convert 3 phase AC to DC. This heavy rectifier is built into a heat sink body that allows unit to keep cool ---Rectifier has spade terminals which will make for a clean and secure installation. No wondering if your wiring is going to come loose ---Two mounting holes to secure the body of the rectifier to your mounting box ---This item is not to me confused with a blocking diode to be used in DC motor applications or with solar Spade Terminals 3/8 Inch 0.
Wind Turbine Blades, 7.5M, Matched set of 3 - This is a set of 3 matched and balanced Wind Turbine Blades for a Nordtank or Micon 65. They were professionally rebuilt in California by a reputable Wind Farm Service facility. Reinforced leading edge with overspeed tip brakes.
Wind Turbine Nordtank 50 kW, Single Phase, 240 Volt - Nacelle w/remanufactured rotor, gearbox, brake, yaw system and. Blade set- rebuilt, good deflections, includes nosecone. Low Hours on Sales Demonstrator Model. Engineered Foundation Prints, Erection Plan, Operation Manual.
Heavy 2 Phase Wind Turbine Generator Slip Ring 30 Amp Per Conductor / Wire - Stop getting twisted!! Gold Plated Contacts Heavy 30 amp Per conductor slip ring total 60 amps....Great for even heavy 12 volt environment Specs ---30 amps per conductor --- 250 volts AC/DC per circuit ---2200 watts per conductor --- rpms 0-300 ---Gold Plated Contacts ---Operational Lifespan: 80,000,000 revolutions depending on temperature, rotation speed and enviroment ---DC applications by using two conductors to cut down on the resistance. If you have application specific questions feel free to ask me before buying. Has 3 mounting holes in collar and long wires for easy installation. To International buyers: the sales price does not include customs or duties that your country may include. Hurricane Wind Power does not know the policies of every customs department worldwide nor their tax schedules.
Heavy 3 Phase Wind Turbine Generator Slip Ring 30 Amp Per Conductor / Wire - Stop getting twisted!! Gold Plated Contacts Heavy 30 amp Per conductor slip ring total 90 amps....Great for even heavy 12 volt environment wind generators as used in our Hurricane XP turbines Specs ---30 amps per conductor --- 250 volts AC/DC per circuit ---2200 watts per conductor --- rpms 0-300 ---Gold Plated Contacts ---Operational Lifespan: 80,000,000 revolutions depending on temperature, rotation speed and enviroment This rotating connector will be great for the wind generator. The current can be split up in DC applications by using two conductors to cut down on the resistance. If you have application specific questions feel free to ask me before buying. Has 3 mounting holes in colar and long wires for easy installation. To International buyers: the sales price does not include customs or duties that your country may include.
Midnite Solar Clipper DC MNCLIP1.5KDC2.4 Wind or Hydro 1,500W 2.4 Ohm USA Made - Midnite DC Clipper MNCLIP1.5KDC2.4 Used with Midnite Classic MPPT Charge Controllers Please note that there is a 3 week lead time on this item. Each unit is built per order and shipped direct from the manufacturer The MidNite Clipper is designed to control Wind or Hydro turbines and work with the Classic to charge your battery. The Clipper communicates with the Classic to slow the turbine when the batteries are full, and also contains a standalone self-powered adjustable max VOC limiting circuit. The DC Clipper is designed to work with DC turbines and was designed for up to 1.5kw maximum turbines. The 1.5K DC Clipper comes standard with 2.4 ohms of resistance. We can order custom other resistance values upon request. 1,500 watt DC Clipper for Wind or Hydro designed to work with the MidNite Classic.
Met One 083C-1-35 Relative Humidity Sensor Temperature Little Use SALE $99 - The sensor looks intact. The long cable is attached. This is the only one available on the internet. There shows very light surface wear from use. KEEP IN MIND ALL OUR PRODUCTS HAVE NON REMOVABLE TAMPER PROOF HOLOGRAMS AND WE KEEP SERIAL NUMBERS AND DIGITAL PHOTOS OF THE PRODUCT ON FILE!
RARE 170.41 Metone anemometer cup 170.41 Used Wind Calibrator NICE $59 - Check it out! The stem is 3/8" across by 1/2" long. 2 are black and one is clear. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
Windmill turbine blade wind mill fin power big fiberglass farm part generator - These are some blades I got that came from a government sale I believe. They are made of fiberglass. They are not broken and In good shape. I'm not sure exactly what they fit. They are 128 inches long and at the widest part are 29.5 inches wide. I will load them but buyer pays shipping. If need addisional information please ask.
WIND TURBINE Patch - They are the sew on type. This is a Clipper Liberty wind turbine. 1800 available. Would make a great addition to your wind power clothing, or hats!
Locking Collar Fits 1 1/2" Pipe for Wind Turbine Generator Inside Dia.1-15/16" - Locking Collar Fits 1 1/2" Pipe for Wind Turbine Generator Inside Diameter 1-15/16" Outside Diameter 3" Features: ---High Quality Steel Construction ---Zinc Plated to Prevent Rusting ---Single Allen Set Screw [FREE TRIAL Add a map to your own listings FREE Trial!] (https://newage.mystoremaps.com//echo/tagLine?sid=cea073c8-fc6f-494f-9ca5-610e8850a127&tid=3) Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application.
Flexcharge NC25A-48 Solar Wind Hydro Turbine Charge Controller Hybrid 48 volt US - Flexcharge Solar Wind Hydro Turbine Charge Controller NC25A-48 hybrid 48 volt US Manufactured Long Service Life and Performance History We are a stocking Flexcharge dealer and these controllers come with the manufacturer's Five Year warranty. You can see us listed here on Flexcharge's dealer page: [http://www.flexcharge.com/Where-to-buy.html] (http://www.flexcharge.com/Where-to-buy.html) SES Flexcharge model NC-25A/48 charge controller - 48 volt d.c. The following is copyrighted by SES Flexcharge. NC25A Ultra High Efficiency 25 Ampere Solar and Wind System Charging System Controller The NC25A-(X) is series regulator designed for alternative energy charging systems ranging in size from 0.1A to 25A. It is the ideal regulator for Solar (PV) and Permanent Magnet Generators (Including outboard motors and smaller wind generators).
Flexcharge NC25A-36 Solar Wind Hydro Turbine Charge Controller Hybrid 36 volt US - Flexcharge Solar Wind Hydro Turbine Charge Controller NC25A-36 hybrid 36 volt US Manufactured Long Service Life and Performance History We are a stocking Flexcharge dealer and these controllers come with the manufacturer's Five Year warranty. You can see us listed here on Flexcharge's dealer page: [http://www.flexcharge.com/Where-to-buy.html] (http://www.flexcharge.com/Where-to-buy.html) SES Flexcharge model NC-25A/36 charge controller - 36 volt d.c. The following is copyrighted by SES Flexcharge. NC25A Ultra High Efficiency 25 Ampere Solar and Wind System Charging System Controller The NC25A-(X) is series regulator designed for alternative energy charging systems ranging in size from 0.1A to 25A. It is the ideal regulator for Solar (PV) and Permanent Magnet Generators (Including outboard motors and smaller wind generators).
Flexcharge NC25A-24 Solar Wind Hydro Turbine Charge Controller Hybrid 24 volt US - Flexcharge Solar Wind Hydro Turbine Charge Controller NC25A-24 hybrid 24 volt US Manufactured Long Service Life and Performance History We are a stocking Flexcharge dealer and these controllers come with the manufacturer's Five Year warranty. You can see us listed here on Flexcharge's dealer page: [http://www.flexcharge.com/Where-to-buy.html] (http://www.flexcharge.com/Where-to-buy.html) SES Flexcharge model NC-25A/24 charge controller - 24 volt d.c. The following is copyrighted by SES Flexcharge. NC25A Ultra High Efficiency 25 Ampere Solar and Wind System Charging System Controller The NC25A-(X) is series regulator designed for alternative energy charging systems ranging in size from 0.1A to 25A. It is the ideal regulator for Solar (PV) and Permanent Magnet Generators (Including outboard motors and smaller wind generators).
Rectifier for 3-Three Phase AC Wind Turbine Generator Heavy 100 Amp - This listing is for: One Heavy 100 Amp Rectifier ---Heavy quality rectifier intended for wind turbine rated for 100 amps continuous usage. ---This item is used to convert 3 phase AC to DC. This heavy rectifier is built into a heat sink body that allows unit to keep cool. ---Rectifier has spade terminals which will make for a clean and secure installation. No wondering if your wiring is going to come loose. ---Two mounting holes to secure the body of the rectifier to your mounting box ---This item is not to me confused with a blocking diode to be used in DC motor applications or with solar. Powered by [eBay Turbo Lister] (http://pages.ebay.com/turbo_lister/) The free listing tool. List your items fast and easy and manage your active items. Froo www.froo.
Flexcharge NC25A-12 Solar Wind Hydro Turbine Charge Controller Hybrid 12 Volt US - Flexcharge Solar Wind Hydro Turbine Charge Controller NC25A-12 hybrid 12 volt US Manufactured Long Service Life and Performance History We are a stocking Flexcharge dealer and these controllers come with the manufacturer's Five Year warranty. You can see us listed here on Flexcharge's dealer page: [http://www.flexcharge.com/Where-to-buy.html] (http://www.flexcharge.com/Where-to-buy.html) SES Flexcharge model NC-25A/12 charge controller - 12 volt d.c. The following is copyrighted by SES Flexcharge. NC25A Ultra High Efficiency 25 Ampere Solar and Wind System Charging System Controller The NC25A-(X) is series regulator designed for alternative energy charging systems ranging in size from 0.1A to 25A. It is the ideal regulator for Solar (PV) and Permanent Magnet Generators (Including outboard motors and smaller wind generators).
Zip line Trolley - zip line pulley NEW Improved TESA - Build your own gear, this trolley Pulley system is both light and strong. Steel sheaves NOT aluminum. This trolley is made for running on steel cable, but can also be used on rope. Build your own Zip line with this high quality Trolley.