100
(5000-Pk) Atlas Copco Rivets K50844AHBB/Z05U$379.95$132.98 Buy It Now or Best Offer
(150-Pk) Carbon Steel Flat Head Rivet Nut Zinc Plated M3$11.50$4.03 Buy It Now or Best Offer
Aluminum Oval Head Semi Tubular Rivets M2 M2.5 M3 M4 M5 M6
$6.23 Buy It Now
Nickeled Steel Oval Head Semi Tubular Rivets M2 M2.5 M3 M4 M5 M6
$9.80 Buy It Now
Riveter Gun with 60-Piece Rivet
$24.68 Buy It Now
PCB Rivet Brass Tubular Hollow Rivet Eyelets Vias M0.9 M1.3 M1.5 M1.7-M6 DIY
$1.75 Buy It Now
100Pcs x PCB Rivet Brass Tubular Hollow Rivet Eyelets Vias M0.9 - M6 DIY
$1.85 Buy It Now
Rivet Nuts 10/32 1/4-20 6/32 10/24 (197 total rivet nuts)$38.00 Buy It Now or Best Offer
M6 M8 M10 Plated Copper Iron Semi-hollow Rivet Countersunk Rivets 18mm-26mm Long
$13.99 Buy It Now
5pcs M6 Copper Semi-hollow Rivet Countersunk Rivets 24mm 30mm 34mm 38mm Length
$13.99 Buy It Now
Brass Hollow Rivets Tubular Eyelet M0.9 M1.3 M1.5 M1.7 M2 M2.3 M2.5 M3 M4 M5 M6
$1.04 Buy It Now
Brass Tubular Rivets Hollow Rivet Eyelet M0.9 - M6 Threadless Rivets Grommets
$1.49 Buy It Now
Rivet Nut Flat Head Thread Blind Rivet Nuts Carbon Steel Bolt Kit M4 to M10
$1.69 Buy It Now
1000PCS Hollow Rivets Grommets Circuit Board PCB Nails Kit (M0.9 .3 .5 .7)
$9.00 Buy It Now
M3 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 3mm-40mm Long
$13.99 Buy It Now
M3-M6 Copper Brass Eyelet Hollow Tubular Rivets Through Nuts Hole Grommets
$1.19 Buy It Now
New Henrob Innovative Joining Solutions Reel Of K-Rivets K50744Ay00/Z05U R32T1
$1,219.95 Buy It Now or Best Offer
M4 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 4mm-23mm Length
$13.99 Buy It Now
100pcs M3 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 3mm-15mm L
$13.99 Buy It Now
100pcs M2.5 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 3mm-20mm
$13.99 Buy It Now
100pcs M2 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 3mm-20mm L
$13.99 Buy It Now
M6 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 6mm-32mm Length
$13.99 Buy It Now
M4 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 24mm-55mm Length
$13.99 Buy It Now
M5 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 29mm-62mm Length
$13.99 Buy It Now
M6 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 33mm-70mm Length
$13.99 Buy It Now
M8 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 8mm-70mm Length
$13.99 Buy It Now
M5 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 4mm-28mm Length
$13.99 Buy It Now
M3 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 16mm-35mm Length
$13.99 Buy It Now
M2 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 3mm-16mm Long
$13.99 Buy It Now
M5 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 5mm-60mm Long
$13.99 Buy It Now
M2.5 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 3mm-25mm Long
$13.99 Buy It Now
Fabory U69136.013.0075 Flanged Rivet Nut (100 Pieces)$35.00$21.00 Buy It Now
M10 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 20mm-40mm Long
$13.99 Buy It Now
M8 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 9mm-60mm Long
$13.99 Buy It Now
M6 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 6mm-50mm Long
$13.99 Buy It Now
M4 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 4mm-50mm Long
$13.99 Buy It Now
M2 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 3mm-16mm Long
$13.99 Buy It Now
M5 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 5mm-60mm Long
$13.99 Buy It Now
M2.5 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 3mm-25mm Long
$13.99 Buy It Now
M3 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 3mm-40mm Long
$13.99 Buy It Now
Tubular Rivet M5 Truss Head Semi Hollow Rivets Nickel Plated For Bind Scrapbook
$1.53 Buy It Now
M0.9-M6 Copper Brass Eyelet Hollow Tubular Rivets Through Nuts Hole Grommets
$1.69 Buy It Now
1 watcherSemi Tubular Rivet Punch 3mm,3.5mm 9/64 Semi Tubular Rivets Brass Lot
$50.00 Buy It Now
25 Qty 1024 X 9/32" Stainless Steel Three Prong Tee Nuts bcp102
$14.98 Buy It Now
M6 M8 M10 Plated Copper Iron Semi-hollow Rivet Countersunk Rivets 18mm-26mm Long
$13.99 Buy It Now
5pcs M6 Copper Semi-hollow Rivet Countersunk Rivets 24mm 30mm 34mm 38mm Length
$13.99 Buy It Now![30pcs Accessories Portable Glazing Clips Home For Greenhouse Glass Pane Garden]](https://www.picclickimg.com/yBQAAOSw9fxkRIfd/30pcs-Accessories-Portable-Glazing-Clips-Home-For-Greenhouse.webp "30pcs Accessories Portable Glazing Clips Home For Greenhouse Glass Pane Garden]")
30pcs Accessories Portable Glazing Clips Home For Greenhouse Glass Pane Garden]
$3.93 Buy It Now
1000xMix Tubular Rivets M0.9 M1.3 M1.5 M1.7 Through Hole Circuit Board PCB Nails
$9.00 Buy It Now
25 Qty #10-24 x 9/32" Stainless Steel Three Prong Tee Nuts (BCP1021)
$24.09 Buy It Now
Hillman The Fastener Center Copper Steel Tubular Rivet (20-Piece) 8007 Pack of
$27.99$26.83 Buy It Now
Tubular Rivets Brass Brake Hollow Rivet Nonmagnetic Lining Nut Grommets M0.9 -M6
$2.95 Buy It Now
Hillman The Fastener Center Copper Steel Tubular Rivet (20-Piece) 8007 HILLMAN
$9.99$8.86 Buy It Now
M10 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 20mm-40mm Long
$13.99 Buy It Now
M8 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 9mm-60mm Long
$13.99 Buy It Now
M6 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 6mm-50mm Long
$13.99 Buy It Now
M5 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 5mm-60mm Long
$13.99 Buy It Now
M4 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 4mm-50mm Long
$13.99 Buy It Now
M3 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 3mm-40mm Long
$13.99 Buy It Now
M2.5 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 3mm-25mm Long
$13.99 Buy It Now
M2 Semi-hollow Rivets SUS304 Steel Extension Big Flat Head Rivet 3mm-16mm Long
$13.99 Buy It Now
Zoro Select Tfc0403-100 Semi-Tubular Rivet, Oval Head, 1/16 In Dia., 3/32 In L,
$17.00 Buy It Now
1000xMix Tubular Rivets M0.9 M1.3 M1.5 M1.7 Through Hole Circuit Board PCB Nails
$8.95 Buy It Now
Tubular Rivets M0.9-M6 Circuit Board PCB Nails Copper Eyelet Hollow Through Nuts
$1.09 Buy It Now
ZORO SELECT Semi-Tubular Rivet, Oval Head, 1/8 in Dia., 5/32 in L, 1HBN7
$15.00 Buy It Now
ZORO SELECT Semi-Tubular Rivet, Oval Head, 1/8 in Dia., 1/8 in L, TAC0804-100
$15.00 Buy It Now
ZORO SELECT Semi-Tubular Rivet, Oval Head, 1/8 in Dia., 1/4 in L, TBC0808-100
$13.00 Buy It Now
M8 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 8mm-70mm Length
$13.99 Buy It Now
M6 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 33mm-70mm Length
$13.99 Buy It NowM6 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 6mm-32mm Length
$13.99 Buy It Now
M5 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 29mm-62mm Length
$13.99 Buy It NowM5 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 4mm-28mm Length
$13.99 Buy It Now
M4 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 24mm-55mm Length
$13.99 Buy It NowM4 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 4mm-23mm Length
$13.99 Buy It Now
M3 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 16mm-35mm Length
$13.99 Buy It Now
100pcs M3 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 3mm-15mm L
$13.99 Buy It Now
100pcs M2.5 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 3mm-20mm
$13.99 Buy It Now
100pcs M2 Nickel Plated Iron Half Hollow Rivets Flat Round Head Rivet 3mm-20mm L
$13.99 Buy It Now
Zoro Select 1Hbt3 Semi-Tubular Rivet, Oval Head, 1/4 In Dia., 5/16 In L, Steel
$16.10 Buy It Now
Brass Eyelet Hollow Tubular Rivets M3 M3.5 M4 M5 M6 Through Hole Rivets
$1.76 Buy It Now
Marson SS-5 Pop Rivet Spacers 5/32 x 1/2 X 1/16 Stainless Steel LOT OF 275
$29.95 Buy It Now
1000 PCS M0.9 M1.3 M1.5 M1.7 Copper Hollow Rivets Circuit Board PCB Nails
$8.95 Buy It Now
uxcell 100 Pcs 2mm x 12mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone
$21.77 Buy It Now
uxcell 200 Pcs 3mm x 4mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone
$25.04 Buy It Now
1 watcheruxcell 200 Pcs 4mm x 8mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone
$24.22 Buy It Now
100 Qty 1/4-20 x 5/16" Zinc Plated Four Prong Tee Nuts BCP680
$22.56 Buy It Now
Binding Barrels And Screws Carbon Steel Ni-plated For Photo Album Leather Craft
$490.00 Buy It Now
M2 M2.3 2mm Copper Brass Vias Rivet Nuts Through Hole Rivets Hollow Grommets
$2.25 Buy It Now
M0.9 - 1.7 Copper Brass Vias Rivet Nuts Through Hole Rivets Hollow Grommets
$2.14 Buy It Now
M2.5 M3 Copper Brass Vias Rivet Nuts Through Hole Rivets Hollow Grommets
$6.59 Buy It Now
Zoro Select Tac0912.1-100 Semi-Tubular Rivet, Truss Head, 9/64 In Dia., 3/8 In
$11.69 Buy It Now
Zoro Select 1Hcl8 Semi-Tubular Rivet, Truss Head, 9/64 In Dia., 5/16 In L,
$14.87 Buy It Now
1 watcherZoro Select Tbc0606-100 Semi-Tubular Rivet, Oval Head, 3/32 In Dia., 3/16 In L,
$9.89 Buy It Now
100 Pack Semi Tubular Flat Head Brass Rivets 3/8 Dia Head 7/8 Long X 3/16 Dia (A
$9.99 Buy It Now
1 watcher100 Pack Semi Tubular Flat Head Brass Rivets 3/8 Dia Head 7/8 Long X 3/16 Dia (C
$9.99 Buy It Now
1 watcher100 Pack Semi Tubular Flat Head Brass Rivets 3/8 Dia Head 7/8 Long X 3/16 Dia (D
$9.99 Buy It Now
100 Pack Semi Tubular Flat Head Brass Rivets 3/8 Dia Head 7/8 Long X 3/16 Dia (B
$9.99 Buy It Now
Zoro Select Tfc0608-100 Semi-Tubular Rivet, Oval Head, 3/32 In Dia., 1/4 In L,
$10.60$9.40 Buy It Now
Zoro Select Tbc1620.1-50 Semi-Tubular Rivet, Oval Head, 1/4 In Dia., 5/8 In L,
$13.94$12.37 Buy It Now
Zoro Select Tbc0906.1-100 Semi-Tubular Rivet, Truss Head, 9/64 In Dia., 3/16 In
$11.75$8.95 Buy It Now
Zoro Select Tfc0916.1-25 Semi-Tubular Rivet, Truss Head, 9/64 In Dia., 1/2 In
$6.19 Buy It Now
- 25 VINTAGE BLACK JAPANNED 9/16" x 1/8" SEMI HOLLOW TUBULAR RIVETS, 5/16" HEAD
- 1/8" diameter x 1/2" long x 7/32 head diameter Nickel Finish Tubular Rivets
- Zoro Select Tac0607-100 Semi-Tubular Rivet, Oval Head, 3/32 In Dia., 7/32 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 3/32 In., Rivet Length 7/32 In., Head Dia. 0.147 In., Head Height 0.023 In., Grip Range 0.151 to 0.180 In., Head Angle (Deg.).
- Zoro Select 1Heg2 Semi-Tubular Rivet, Oval Head, 1/4 In Dia., 5/8 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 1/4 in, Rivet Length 5/8 in, Head Dia. 0.437 in, Head Height 0.078 in, Grip Range 0.443 to 0.505 in, Head Angle (Deg.).
- Zoro Select Tfc0406-100 Semi-Tubular Rivet, Oval Head, 1/16 In Dia., 3/16 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 1/16 In., Rivet Length 3/16 In., Head Dia. 0.109 In., Head Height 0.017 In., Grip Range 0.136 to 0.166 In., Head Angle (Deg.).
- Zoro Select Tac0806-100 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 3/16 In L, - Take a look at the features for Zoro Select Semi-Tubular Rivet. Head Type: Oval, Finish: Plain, Rivet Material: Aluminum. ZORO SELECT. Msa Safety 10206064 Harness, Racing Style, 2Xl, Green. Brady 132436 Floor Marking Tape,Polyester,2Inw,100 Ft.
- Copper Brass Vias Rivet Nuts M4 M5 M6 Through Hole Rivets Hollow Grommets - M4 4 M5 4 M6 4. M4 5 M5 5 M6 5. M4 6 M5 6 M6 6. M4 7 M5 7 M6 8. M4 8 M5 8 M6 10. M4 10 M5 10 M6 12. -Material: Brass. - Choice of size：.
- Copper Brass Vias Rivet Nuts M3 M3.5 Through Hole Rivets Hollow Grommets - M3 3 M3 8 M3.5 5. M3 4 M3 9 M3.5 6. M3 5 M3 10 M3.5 7. M3 6 M3 12 M3.5 8. M3 7 M3.5 4. -Material: Brass. - Choice of size：.
- Copper Brass Vias Rivet Nuts M2 M2.3 M2.5 Through Hole Rivets Hollow Grommets - M2 2.5 M2 6 M2.3 4 M2.3 10 M2.5 6. M2 3 M2 7 M2.3 5 M2.5 2.5 M2.5 7. M2 3.5 M2 8 M2.3 6 M2.5 3 M2.5 8. M2 4 M2 10 M2.3 7 M2.5 4 M2.5 9. M2 2 M2 5 M2.3 3. -Material: Brass. - Choice of size：. Product Information.
- Copper Brass Vias Rivet M0.9 M1.3 M1.5 M1.7 Through Hole Rivets Hollow Grommets - M0.9 3 M1.3 4 M1.5 4 M1.7 4. M0.9 2.5 M1.3 3.5 M1.5 3.5. M1.3 2.5 M1.5 2.5 M1.7 2.5. M1.3 3 M1.5 3 M1.7 3. -Material: Brass. - Choice of size：.
- Tubular Rivets Brass Brake Hollow Rivet Nonmagnetic Lining Nut Grommets M0.9 -M6 - ◪ Size： M0.9M1.7M2.3M3M5M6. ◪ Type: Rivet hollow copper rivets. ◪ Shape: tubular. ◪ Material: brass. And due to many factors, flights have been reduced, causing international logistics delays.we realy hope you can understand that-.
- Rivet Nut Flat Head Thread Blind Rivet Nuts Carbon Steel Bolt Kit M4 to M10 - Rivet Nut Flat Head Thread Blind Rivet Nuts Carbon Steel Bolt Kit M4 to M10 🔢Product Manual： Product name: Rivet nut Product material:Carbon Steel Product color: Color Zinc Product category: Rivet/nut Product Shape: Round tube Product features: Hardened high-strength carbon steel material, beautiful and practical, standard Phillips screw, not easy to slip during installation, quick installation, smooth surface of the screw without burrs, durable. Adapt to the scene: construction industry, hardware accessories, furniture industry, shipbuilding industry, medical equipment, factory industry, electronics industry, etc.
- Zoro Select Tbc1214.1-50 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 7/16 In - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 3/16 in, Rivet Length 7/16 in, Head Dia. 0.375 in, Head Height 0.06 in, Grip Range 0.307 to 0.347 in, Head Angle (Deg.).
- 25 Pcs M4 Zinc Plated Carbon Steel Car Flat Head Rivet Nut Threaded Insert - Thread Size: M4. Step 4: Press the rivet nut, withdraw the rivet gun. A rivet nut fastener is a tubular rivet with internal threads. It can be installed in seconds form one side of the work. A hand or power tool pull-up stud engages the threads of the rivet nut fastener and exerts a pull, causing the shank to expand tightly against the material being fastened.
- Zoro Select Tfc1218.3-50 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 9/16 In - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 3/16 In., Rivet Length 9/16 In., Head Dia. 0.375 In., Head Height 0.060 In., Grip Range 0.432 to 0.472 In., Head Angle (Deg.).
- Zoro Select Tfc1610-50 Semi-Tubular Rivet, Oval Head, 1/4 In Dia., 5/16 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 1/4 in, Rivet Length 5/16 in, Head Dia. 0.437 in, Head Height 0.078 in, Grip Range 0.130 to 0.192 in, Head Angle (Deg.).
- Zoro Select Tac1208.1-100 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 1/4 In - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 3/16 in, Rivet Length 1/4 in, Head Dia. 0.375 in, Head Height 0.06 in, Grip Range 0.120 to 0.160 in, Head Angle (Deg.).
- brass tubular rivet / hollow 100 pcs. - Overall length. 170.
- Zoro Select Tbc0908.1-100 Semi-Tubular Rivet, Truss Head, 9/64 In Dia., 1/4 In - Tubular rivets are frequently used with plastics, wood, and fabric. Take a look at the features for Zoro Select Semi-Tubular Rivet. Head Type: Truss, Finish: Plain, Rivet Material: Brass. Zoro Select P-Prp-040X013/038K Caster Wheel,4 In.,250 Lb.,85 Shore A.
- 6 Tubes Vintage Holland Assorted Tubular Rivets 3/4 Ounce Tubes Brass Finish NEW - Holland Assorted Tubular Rivets.
- Zoro Select Tfc0404-100 Semi-Tubular Rivet, Oval Head, 1/16 In Dia., 1/8 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 1/16 In., Rivet Length 1/8 In., Head Dia. 0.109 In., Head Height 0.017 In., Grip Range 0.074 to 0.104 In., Head Angle (Deg.).
- Zoro Select Tsc1218.1-100 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 9/16 In - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 3/16 In., Rivet Length 9/16 In., Head Dia. 0.375 In., Head Height 0.060 In., Grip Range 0.432 to 0.472 In., Head Angle (Deg.).
- Galvanized Steel Oval Head Semi Tubular Rivets M3 M4 M5 M6 - Size:Select M3 M4 M5 M6. Material: Galvanized Steel. Head Style:Oval Head.
- Galvanized Steel Oval Head Semi Tubular Rivets M3 M4 M5 M6 - Size:Select M3 M4 M5 M6. Material: Galvanized Steel. Head Style:Oval Head.
- Zoro Select Tbc1616-50 Semi-Tubular Rivet, Oval Head, 1/4 In Dia., 1/2 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 1/4 in, Rivet Length 1/2 in, Head Dia. 0.437 in, Head Height 0.078 in, Grip Range 0.318 to 0.380 in, Head Angle (Deg.).
- Zoro Select Tbc1208.1-100 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 1/4 In - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 3/16 In., Rivet Length 1/4 In., Head Dia. 0.375 In., Head Height 0.060 In., Grip Range 0.120 to 0.160 In., Head Angle (Deg.).
- Qty 200 Wurth Tubular Rivet Brass C-250321 Free Shipping - QTY 200 WURTH TUBULAR RIVET BRASS /W. 068/.073 HOLE DIA. 070/.086 HOLE DEPTH PER DRAWING #2503-21 REV C MOD HEAD DIA. 179/.195 WITH LEVEL 3 PPAP.
- Copper Brass Vias Rivet Nuts M0.9 - M6 Through Hole Rivets Hollow Grommets - Material: Brass. Due to the differences in shooting scenes and technology, there will be a chromatic aberration between the photos and actual colors.
- Fifty 50 3/8-16 x 7/16" Zinc Plated Four Prong Tee Nuts BCP682 - Tee Nuts are comprised of a long thin body and a flange at one end, resembling a T in profile. The flanges of the T-nuts have hooks or serrations on the prongs that dig into a wooden work piece as the bolt is tightened from the opposite side of the piece, providing better retention.
- Brass Eyelet Hollow Tubular Rivets M0.9 M1.3 M1.5 M1.7 M2 M2.3 M2.5 Through Hole - Sizes: M0.9 M1.3 M1.5 M1.7 M2 M2.3 M2.5. Brass Eyelet Hollow Tubular Rivets. Use :H59-3 brass is widely used to manufacture pins, screws, gasket hardware, pipe fittings, bearing retainers, etc.
- ( 100 ) 1/16 Dia. x 1/8 Long Brass Semi Tubular Rivet *** New Old Stock *** - 1/16" Dia. x 1/8" Semi Tubular Rivet.
- Zoro Select Tfc1612.1-50 Semi-Tubular Rivet, Oval Head, 1/4 In Dia., 3/8 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 1/4 in, Rivet Length 3/8 in, Head Dia. ZORO SELECT. Zoro Select B38130.037.0001 Flat Washer, Fits Bolt Size 3/8 In Steel, Zinc.
- Zoro Select Tfc1618-25 Semi-Tubular Rivet, Oval Head, 1/4 In Dia., 9/16 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 1/4 In., Rivet Length 9/16 In., Head Dia. 0.437 In., Head Height 0.078 In., Grip Range 0.380 to 0.442 In., Head Angle (Deg.).
- Hollow Rivets Brass Crimped Rivet Copper Eyelets Tubular Rivets M0.9 M1.3 M5~M6 - Material : Brass. Product length ：2.5mm~12mm.
- Freight FareDifference Supplement To Make up the difference
- Zoro Select Tac1218.1-100 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 9/16 In - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 3/16 In., Rivet Length 9/16 In., Head Dia. 0.375 In., Head Height 0.060 In., Grip Range 0.432 to 0.472 In., Head Angle (Deg.).
- Zoro Select 1Hbw7 Semi-Tubular Rivet, Truss Head, 9/64 In Dia., 1/2 In L, Brass - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 9/64 In., Rivet Length 1/2 In., Head Dia. 0.312 In., Head Height 0.040 In., Grip Range 0.400 to 0.430 In., Head Angle (Deg.).
- Zoro Select Tbc0809-100 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 9/32 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 1/8 In., Rivet Length 9/32 In., Head Dia. 0.218 In., Head Height 0.034 In., Grip Range 0.192 to 0.223 In., Head Angle (Deg.).
- Zoro Select Tfc0810-50 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 5/16 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 1/8 In., Rivet Length 5/16 In., Head Dia. 0.218 In., Head Height 0.034 In., Grip Range 0.223 to 0.254 In., Head Angle (Deg.).
- Zoro Select Tbc1610.1-50 Semi-Tubular Rivet, Oval Head, 1/4 In Dia., 5/16 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 1/4 In., Rivet Length 5/16 In., Head Dia. 0.437 In., Head Height 0.078 In., Grip Range 0.130 to 0.192 In., Head Angle (Deg.).
- Zoro Select Tbc1618-50 Semi-Tubular Rivet, Oval Head, 1/4 In Dia., 9/16 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 1/4 In., Rivet Length 9/16 In., Head Dia. 0.437 In., Head Height 0.078 In., Grip Range 0.380 to 0.442 In., Head Angle (Deg.).
- Zoro Select Tac0605-100 Semi-Tubular Rivet, Oval Head, 3/32 In Dia., 5/32 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 3/32 In., Rivet Length 5/32 In., Head Dia. 0.147 In., Head Height 0.023 In., Grip Range 0.089 to 0.118 In., Head Angle (Deg.).
- 1/4" X 1/2" Grip Aluminum Pop Rivets ABA88 LOT OF 250 Bulk Rivet King - RIVET KING. GRIP RANGE 1/2". SOLD AS A LOT OF 250! MATERIAL - ALL ALUMINUM. MANUFACTURER PART NUMBER. PHOTO SHOWS ACTUAL PART. MOST HAND TOOLS ARE FULLY COVERED BY MANUFACTURER UNLESS OTHERWISE STATED.
- Zoro Select Tac1214.1-100 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 7/16 In - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 3/16 in, Rivet Length 7/16 in, Head Dia. 0.375 in, Head Height 0.06 in, Grip Range 0.307 to 0.347 in, Head Angle (Deg.).
- Zoro Select Tbc1614-50 Semi-Tubular Rivet, Oval Head, 1/4 In Dia., 7/16 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 1/4 In., Rivet Length 7/16 In., Head Dia. 0.437 In., Head Height 0.078 In., Grip Range 0.255 to 0.317 In., Head Angle (Deg.).
- 3/32" X 1/4 Alum Head ACS34 Steel Ring Shank Pop Rivets 120 Countersunk 1000 LOT - MATERIAL - ALUMINUM HEAD STEEL SHANK. STEEL SHANK HAS RINGS (SERRATED) FOR EXTRA GRIP. SOLD AS A LOT OF 1000! GRIP RANGE 1/4". MANUFACTURER PART NUMBER. FITS MODEL. NEW PARTS AND TOOLS ARE PROVIDED DIRECT BY MANUFACTURER.
- 350 pcs. Semi-Tubular Brass Rivets 3/32" dia. x 1/8"long - Semi-Tubular Brass Rivets 3/32" dia. Ordered the wrong thing and now you can get a deal. FREE scheduling, supersized images. More than just a pretty picture.
- Zoro Select Tsc0605-100 Semi-Tubular Rivet, Oval Head, 3/32 In Dia., 5/32 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 3/32 In., Rivet Length 5/32 In., Head Dia. 0.147 In., Head Height 0.023 In., Grip Range 0.089 to 0.118 In., Head Angle (Deg.).
- 1/8" X 1/8" Grip Large Flange Aluminum Pop Rivets ABA4-2L LOT OF 750 Bulk - SOLD AS A LOT OF 750! GRIP RANGE 1/8". MATERIAL - ALL ALUMINUM. MANUFACTURER PART NUMBER. AIS INVENTORY NUMBER AFABA4-2L. PHOTO SHOWS ACTUAL PART. MOST HAND TOOLS ARE FULLY COVERED BY MANUFACTURER UNLESS OTHERWISE STATED.
- 5/32" X 1/2" Grip Aluminum Pop Rivets ABA5-8 LOT OF 500 Bulk Automatic Fastener - MARSON FASTENER. GRIP RANGE 1/2". SOLD AS A LOT OF 500! MATERIAL - ALL ALUMINUM. MANUFACTURER PART NUMBER. PHOTO SHOWS ACTUAL PART. MOST HAND TOOLS ARE FULLY COVERED BY MANUFACTURER UNLESS OTHERWISE STATED.
- 5/32" X 3/8" Grip Aluminum Pop Rivets ABA5-6 LOT OF 500 Bulk Automatic Fastener - AUTOMATIC FASTENER. GRIP RANGE 3/8". SOLD AS A LOT OF 500! MATERIAL - ALL ALUMINUM. MANUFACTURER PART NUMBER. PHOTO SHOWS ACTUAL PART. MOST HAND TOOLS ARE FULLY COVERED BY MANUFACTURER UNLESS OTHERWISE STATED.
- 5/32" X 3/16" Grip Marson Aluminum Pop Rivets AB5-3A LOT OF 500 Pc Bulk 40234 - MARSON FASTENER. GRIP RANGE 3/16". POP RIVET AISLE. SOLD AS A LOT OF 500! MATERIAL - ALL ALUMINUM. MANUFACTURER PART NUMBER. PHOTO SHOWS ACTUAL PART. MOST HAND TOOLS ARE FULLY COVERED BY MANUFACTURER UNLESS OTHERWISE STATED.
- 5/32" X 1/4" Grip Marson Aluminum Pop Rivets AB5-4A LOT OF 500 Pc Bulk 40235 - MARSON FASTENER. AB5-4A MARSON 5/32 X 1/4 GRIP MUSHROOM HEAD POP OR BREAK RIVETS LOT OF 500. GRIP RANGE 1/4". POP RIVET AISLE. SOLD AS A LOT OF 500! MATERIAL - ALL ALUMINUM. MANUFACTURER PART NUMBER.
- Zoro Select Tfc0405-100 Semi-Tubular Rivet, Oval Head, 1/16 In Dia., 5/32 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 1/16 In., Rivet Length 5/32 In., Head Dia. 0.109 In., Head Height 0.017 In., Grip Range 0.105 to 0.135 In., Head Angle (Deg.).
- Zoro Select Tac1610.1-100 Semi-Tubular Rivet, Oval Head, 1/4 In Dia., 5/16 In - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 1/4 In., Rivet Length 5/16 In., Head Dia. 0.437 In., Head Height 0.078 In., Grip Range 0.130 to 0.192 In., Head Angle (Deg.).
- Zoro Select Tsc1216.1-100 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 1/2 In - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 3/16 in, Rivet Length 1/2 in, Head Dia. 0.375 in, Head Height 0.06 in, Grip Range 0.370 to 0.410 in, Head Angle (Deg.).
- Zoro Select Tsc0406-100 Semi-Tubular Rivet, Oval Head, 1/16 In Dia., 3/16 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 1/16 in, Rivet Length 3/16 in, Head Dia. 0.109 in, Head Height 0.017 in, Grip Range 0.136 to 0.166 in, Head Angle (Deg.).
- Hollow Rivets DIY Through Hole Brass Decorative Hollow Rivets(4.8x2.3x4.5mm)↑ - Item Type: Hollow Rivets. Feature: 1. Material: Made of high quality brass material, it has excellent corrosion resistance and excellent elasticity, and is sturdy and durable. Material: Brass.
- Zoro Select U69136.013.0075 Flanged Rivet Nut, #6-32 Dia./Thread Size, 0.325 In - ZORO SELECT U69136.013.0075 Flanged Rivet Nut, #6-32 Dia. /Thread Size, 0.325 in. /Thread Size #6-32, Length 0.438 in, Drill Size #12, Grip Range 0.010 in to 0.075 in, Hole Size 0.189 in, Head Height 0.032 in, Head Dia.
- Zoro Select Tbc0912.1-100 Semi-Tubular Rivet, Truss Head, 9/64 In Dia., 3/8 In - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 9/64 In., Rivet Length 3/8 In., Head Dia. 0.312 In., Head Height 0.040 In., Grip Range 0.275 to 0.305 In., Head Angle (Deg.).
- Zoro Select Tsc0812-100 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 3/8 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 1/8 In., Rivet Length 3/8 In., Head Dia. 0.218 In., Head Height 0.034 In., Grip Range 0.286 to 0.317 In., Head Angle (Deg.).
- Zoro Select Tsc0608-100 Semi-Tubular Rivet, Oval Head, 3/32 In Dia., 1/4 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 3/32 In., Rivet Length 1/4 In., Head Dia. 0.147 In., Head Height 0.023 In., Grip Range 0.183 to 0.212 In., Head Angle (Deg.).
- Zoro Select Tsc0814-100 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 7/16 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 1/8 In., Rivet Length 7/16 In., Head Dia. 0.218 In., Head Height 0.034 In., Grip Range 0.348 to 0.379 In., Head Angle (Deg.).
- Zoro Select Tsc0403-100 Semi-Tubular Rivet, Oval Head, 1/16 In Dia., 3/32 In L, - Take a look at the features for Zoro Select Semi-Tubular Rivet. Head Type: Oval, Finish: zinc, Rivet Material: Steel. ZORO SELECT. Westward 31Ng29 Anchor Pins, Steel, 6 In. X 1 In., Pk500. General Purpose.
- 50Pcs 5mm x 22mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 10mpack of Steel Semi-Tubular Flat Head Rivets 5/8 Head, 3/8 And 5/16 - 10mpack of Steel Semi-Tubular Flat Head Rivets 5/8 Head, 3/8 And 5/16.
- ZORO SELECT 5ZVL7 Liner Rivet, 3/16 x 7/16 In.,PK500 - Liner Rivet, Anchor Head Style Dome, Anchor Body Material Aluminum, Anchor Body Finish Plain, Pin Material Aluminum, Anchor Dia. 3/16 in, Anchor Length 7/16 in, Package Quantity 500.
- Zoro Select Tbc0604-100 Semi-Tubular Rivet, Oval Head, 3/32 In Dia., 1/8 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 3/32 in, Rivet Length 1/8 in, Head Dia. 0.147 in, Head Height 0.023 in, Grip Range 0.058 to 0.087 in, Head Angle (Deg.).
- Jay-Cee 1/4 X 1-1/2” Semi-tubular Rivets Steel 7/16 Oval Hd Hollow-End (25 Pc) - A & L Industries or tooltimes2 brings you another item. This just came in and we have thousands of these. 1/4 X 1-1/2” Semi-tubular Rivets Steel 7/16 Oval Head Hollow-end (25 Pieces).
- Used POWERFAST Swivel Head Hand Riveter Rivet Gun #446 - Used POWERFAST Swivel Head Hand Riveter Rivet Gun #446.
- Hillman FP Tubular Copper Rivets - Copper Rivets 3/8 - 3/4, 10 cards per box. 20 pcs per card. This ad is for the entire box.
- ZORO SELECT 5ZVL4 Driven Rivet, Aluminum, Plain, Aluminum Pin, 1/4 in Anchor - Driven Rivet, Anchor Head Style Brazier, Anchor Body Material Aluminum, Anchor Body Finish Plain, Pin Material Aluminum, Anchor Dia. 1/4 in, Anchor Length 17/32 in, Package Quantity 500.
- M0.9 - M6 Brass Eyelet Hollow Tubular Rivets Vias Through Nuts Hole Grommets - Sizes: M0.9 M1.3 M1.5 M1.7 M2 M2.3 M2.5 M3 M3.5 M4 M5 M6. Material: Brass.
- Through Hole Rivet M0.9~M6 Brass Eyelet Button Rivet Brass Rivet Length2.5~12mm - M0.9 ~ M6 Through Hole Rivet. M0.9 2.5 M2 2 M2.3 3 M3 3 M4 4 M6 4. M0.9 3 M2 2.5 M2.3 4 M3 4 M4 5 M6 5. M1.3 2.5 M2 3 M2.3 5 M3 5 M4 6 M6 6. M1.3 3 M2 3.5 M2.3 6 M3 6 M4 7 M6 8. M1.3 3.5 M2 4 M2.3 7 M3 7 M4 8 M6 10.
- 40159 SB6-12 3/16" Diameter Buttonhead Rivets Grip Range 5/8"-3/4" Steel (500pc) - You are buying one box of five hundred rivets. We will do our best to describe each item to the best of our ability.
- ZORO SELECT 5ZVL2 Driven Rivet, Aluminum, Plain, Aluminum Pin, 3/16 in Anchor - Driven Rivet, Anchor Head Style Brazier, Anchor Body Material Aluminum, Anchor Body Finish Plain, Pin Material Aluminum, Anchor Dia. 3/16 in, Anchor Length 19/32 in, Package Quantity 500.
- 10 pieces tubular rivets 1/8 x 3/8 P/N 8448697 steel oxide coated 5320010637635
- Black Steel Oval Head Semi Tubular Rivets M2.5 M3 M4 M5 M6 - Size:Select M2.5 M3 M4 M5 M6. Head Style:Oval Head.
- Black Steel Oval Head Semi Tubular Rivets M2.5 M3 M4 M5 M6 - Size:Select M2.5 M3 M4 M5 M6. Head Style:Oval Head.
- 25 Snug Fasteners 3/8-16 x 7/16" Zinc Plated Four Prong Tee Nuts (SNG679) Sealed - 25 quantity Snug Fasteners 3/8-16 x 7/16" Zinc Plated Four Prong Tee Nuts (SNG679) Sealed. C8
- Nickeled Steel Oval Head Semi Tubular Rivets M2 M2.5 M3 M4 M5 M6 - Material: Nickeled Steel. Size:Select M2 M2.5 M3 M4 M5 M6.
- Nickeled Steel Oval Head Semi Tubular Rivets M2 M2.5 M3 M4 M5 M6 - Material: Nickeled Steel. Size:Select M2 M2.5 M3 M4 M5 M6.
- Aluminum Thin Flat Head Semi Tubular Rivets M2 M2.5 M3 M4 M5 M6 - Size:Select M2 M2.5 M3 M4 M5 M6. Head Style:Thin Head.
- Aluminum Thin Flat Head Semi Tubular Rivets M2 M2.5 M3 M4 M5 M6 - Size:Select M2 M2.5 M3 M4 M5 M6. Head Style:Thin Head.
- 304 Stainless Steel Thin Flat Head Semi Tubular Rivets M2 M2.5 M3 M4 M5 M6 - Size:Select M2 M2.5 M3 M4 M5 M6. Head Style:Thin Head.
- 304 Stainless Steel Thin Flat Head Semi Tubular Rivets M2 M2.5 M3 M4 M5 M6 - Size:Select M2 M2.5 M3 M4 M5 M6. Head Style:Thin Head.
- Aluminum Oval Head Semi Tubular Rivets M2 M2.5 M3 M4 M5 M6 - Size:Select M2 M2.5 M3 M4 M5 M6. Head Style:Oval Head.
- Aluminum Oval Head Semi Tubular Rivets M2 M2.5 M3 M4 M5 M6 - Size:Select M2 M2.5 M3 M4 M5 M6. Head Style:Oval Head.
- Zoro Select U69136.037.0200 Flanged Rivet Nut, 3/8"-16 Dia./Thread Size, 0.781 - ZORO SELECT U69136.037.0200 Flanged Rivet Nut, 3/8"-16 Dia. /Thread Size, 0.781. /Thread Size 3/8 In.-16, Length 0.938 in, Drill Size 1/2 in, Grip Range 0.115 in to 0.200 in, Hole Size 0.49 in, Head Height 0.088 in, Head Dia.
- 1000 PCS Tubular Rivets M0.9 M1.3 M1.5 M1.7 Hollow Rivet Nuts Assortment Kit - Tubular Rivets M0.9 M1.3 M1.5 M1.7 Mix Circuit Board PCB Nails Copper Hollow Rivet Nuts Kit. size：M0.9 M1.3 M1.5 M1.7. Via can easily be ground down if required to the desired length and center punched on the shaft side of the circuit board to spread that side of the shaft.
- 10/50X M2-M6 GB875 Aluminum Flat Thin Head Semi Hollow Tubular Shank Punch Rivet - There are 10/50pcs high quality GB875 flat head semi-hollow rivet. M2 (2mm) / M2.5 (2.5mm) / M3 (3mm) / M4 (4mm) / M5 (5mm) / M6(6mm). Shank length.
- (5,000) 3/32 X 1/8" Semi Tubular Rivet Aluminum Truss Head .0875x.125" Head=.19" - 3/32 x 1/8 Semi Tubular Rivet Aluminum Truss Head. The head is 3/16" wide.
- (1,000) 3/32 X 1/8" Semi Tubular Rivet Aluminum Truss Head .0875x.125" Head=.19" - 3/32 x 1/8 Semi Tubular Rivet Aluminum Truss Head. 1000 pieces.
- (200) 3/32 X 1/8" Semi Tubular Rivet Aluminum Truss Head .0875x.125" Head=.19" - 3/32 x 1/8 Semi Tubular Rivet Aluminum Truss Head. 200 pieces.
- ZORO SELECT Semi-Tubular Rivet, 1/4x5/16 In, PK100 1HBT3 - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 1/4 In., Rivet Length 5/16 In., Head Dia. 0.437 In., Head Height 0.078 In., Grip Range 0.130 to 0.192 In., Head Angle (Deg.).
- ZORO SELECT Semi-Tubular Rivet, 1/8x3/16 In, PK100 TBC0806-100 - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 1/8 In., Rivet Length 3/16 In., Head Dia. 0.218 In., Head Height 0.034 In., Grip Range 0.098 to 0.129 In., Head Angle (Deg.).
- 100Pcs 2.5mm x 6mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2.5mm x 5mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2.5mm x 16mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- Align Aerospace Rivets 3,000+ - Align Aerospace Rivet. Approx 3,400 rivets.
- 100Pcs 3mm x 16mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- M4 M5 M6 Copper Brass Vias Rivet Nuts Through Hole Rivets Hollow Grommets - Type: Brass Rivet Nuts. Material: Brass.
- M2.5 M3 Copper Brass Vias Rivet Nuts Through Hole Rivets Hollow Grommets - Type: Brass Rivet Nuts. Material: Brass.
- 1000xMix Tubular Rivets M0.9 M1.3 M1.5 M1.7 Through Hole Circuit Board PCB Nails - Tubular Rivets M0.9 M1.3 M1.5 M1.7 Mix Circuit Board PCB Nails Copper Hollow Rivet Nuts Kit. size：M0.9 M1.3 M1.5 M1.7. Via can easily be ground down if required to the desired length and center punched on the shaft side of the circuit board to spread that side of the shaft.
- 100 Qty #10-24 x 9/32" Stainless Steel Three Prong Tee Nuts (SNG1070) Sealed - 100 Qty #10-24 x 9/32" Stainless Steel Three Prong Tee Nuts (SNG1070) Sealed.
- Rivet, 3/16 dia, solid brass, Semi tubular, 11/32 long, bag of 500 - Solid Brass Rivet, 100 pcs/bag - 3/16 dia. x 11/32 long, semi tubular, 7/16 D x. 06 Truss Head.
- Rivet, 3/16 dia, solid brass, Semi tubular, 11/32 long, bag of 100 - Solid Brass Rivet, 100 pcs/bag - 3/16 dia. x 11/32 long, semi tubular, 7/16 D x. 06 Truss Head.
- VVG Nuts To Crimp IN Blind Sfm-R Steel Head Flat Serrated Of M4 A M12 - The history of the VVG company begins in the 1930s in Germany. Alfred Honsel founded in Fröndenberg in the Ruhr, the company „Alfred Honsel Nieten- und Metallwarenfabrik GmbH & Co.” which first produced aluminum pots and pans, whose handles and handles were fixed with rivets. It quickly became apparent that there was great potential there. Also, in 1945 the production of household items was discontinued and the focus was entirely on the development and production of rivets. In order to supply customers quickly and reliably on a daily basis, VVG Besfestigungstechnik was founded in 1994 as a commercial distribution company specializing in riveting technology. With a well-stocked warehouse, know-how from many years of experience and production, it can meet customers' different demands. The co.
- VVG Nuts To Crimp IN Blind Cavity Sfm-H Steel Head Flat Of M4 A M6 - The history of the VVG company begins in the 1930s in Germany. Alfred Honsel founded in Fröndenberg in the Ruhr, the company „Alfred Honsel Nieten- und Metallwarenfabrik GmbH & Co.” which first produced aluminum pots and pans, whose handles and handles were fixed with rivets. It quickly became apparent that there was great potential there. Also, in 1945 the production of household items was discontinued and the focus was entirely on the development and production of rivets. In order to supply customers quickly and reliably on a daily basis, VVG Besfestigungstechnik was founded in 1994 as a commercial distribution company specializing in riveting technology. With a well-stocked warehouse, know-how from many years of experience and production, it can meet customers' different demands. The co.
- Nuts Á Crimp IN Blind Ssm-R Steel Head Countersunk Serrated M6X16 VVG - Blind rivet nuts SSM-R Steel Notched countersunk head M6X16 Vvg Head diameter (dk): 11.3mm Head height (k): 1.5mm Barrel diameter (D): 9.0mm Drilling diameter: 9.1mm Min. axial tensile force: 15000 N Body length: 16mm Clamping range: 1.5-4.5mm The notching makes it possible to increase the resistance to rotation of the blind crimp nut in the support part. These nuts are preferably used on low resistance supports (Constituent material of the support less "hard" than that of the blind rivet nut) Crimping pliers for sale in our EBay shop .
- 25 Nut A Crimp Rivet Threaded M6 Steel Zinc Plated BOLLHOFF - LOT OF 25 M6 CRIMPING NUTS zinc-plated steel Condition: new BOLLHOFF crimp nut Benefits Double function: nut and rivet Automation possible for high speeds Installation possible at all stages of the assembly line Resists frequent loosening. Low exposure time: 2 seconds crimping time Reduced equipment cost The pose a RIVKLE® crimp nut Example of installation by traction Dimensions in mm No screws Length thickness to crimp Drilling diameter Barrel diameter Head diameter head thickness M5 13 0.5 - 3.0 7.0 - 7.1 6.9 10 1.1 M6 16 0.5 - 3.0 9.0 - 9.1 8.9 12 1.6 M8 17.5 0.5 - 3.0 11.0 - 11.1 10.9 15 1.6 I also sell pliers cri.
- Batch Of 2 Nut Rivet A Crimp M10 Aluminum - LOT OF 10 CRIMP NUTS M10 aluminum Condition: new Dimensions in mm No screws Length crimping thickness Drilling diameter Barrel diameter Head diameter head thickness M5 13 0.5 - 3.0 7.0 - 7.1 6.9 10 1.1 M6 16 0.5 - 3.0 9.0 - 9.1 8.9 12 1.6 M8 17.5 0.5 - 3.0 11.0 - 11.1 10.9 15 1.6.
- Nut A Crimp Insert Threaded M4 M5 M6 M8 Steel Zinc Plated BOLLHOFF Rivkle Plus - BOLLHOFF crimp nut The RIVKLE® crimp nuts easily adapt to all materials: metal, plastic ... Benefits Double function: nut and rivet No deterioration of the support (mounting possible on painted or coated sheets) Automation possible for high speeds Installation possible at all stages of the assembly line Resists frequent loosening. Low exposure time: 2 seconds crimping time Reduced equipment cost Also on sale in my EBay shop pliers for the application of crimp nuts Dimensions in mm No screws Length thickness to crimp Drilling diameter Barrel diameter Head diameter head thickness M5 13 0.5 - 3.0 7.0 - 7.1 6.9 10 1.1 M6 16 0.5 - 3.0 9.0 - 9.1 8.9 12 1.6 M8.
- Nut A Crimp Starry Fut Split M8 M6 Steel Zinc Plated VVG - VVG Socket blind blind rivet nuts SFM-PL Zinc plated steel flat head On the other hand, the blind blind star nuts offer a very large crimp range. M8 nut (10,816,080,710) Body length 28.8mm Clamping range 0.5 to 7.1 · Head diameter (dk): 19.6mm · Head height (k): 1.6 mm · Barrel diameter (D): 11.1 mm · Drilling diameter: 11.2mm · Torque: 21 Nm · Min. axial tensile force: 27000 N M6 nut (10,816,060,710) Body length 29.6mm Clamping range 0.5 to 7.
- 10/50X M2-M6 GB875 Aluminum Flat Thin Head Semi Hollow Tubular Shank Punch Rivet - There are 10/50pcs high quality GB875 flat head semi-hollow rivet. M2 (2mm) / M2.5 (2.5mm) / M3 (3mm) / M4 (4mm) / M5 (5mm) / M6(6mm). Shank length.
- Steel Rivets Lot of 150 Assorted Sizes - LOT OF 150 RIVETS.
- Aluminum Rivets Lot of 300 Assorted Sizes - LOT OF 300+ ALUMINUM RIVETS.
- 100Pcs 5mm x 16mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 4mm x 18mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions:Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 50Pcs 5mm x 30mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 5mm x 16mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 50Pcs 5mm x 22mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2.5mm x 10mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 4mm x 14mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 200Pcs 4mm x 10mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2.5mm x 14mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- Zoro Select 1Hbt4 Semi-Tubular Rivet, Oval Head, 1/4 In Dia., 3/8 In L, Steel - In many cases, if the material to be penetrated is soft enough, the edge of the tubular rivet will "self-pierce" through the material. Head Type: Oval, Finish: zinc, Rivet Material: Steel. ZORO SELECT.
- 50Pcs 6mm x 14mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2mm x 10mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 3mm x 7mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 5mm x 12mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 3mm x 12mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2mm x 18mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 50Pcs 5mm x 30mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 3mm x 18mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- DISCO 18130PK Tubular Rivet, 5.3 mm Dia., 7.5 mm L, Steel Body, 100 PK - Self Piercing Rivet,18130PK,PK100, Package Quantity 100.
- DISCO 18131PK Tubular Rivet, 5.3 mm Dia., 8 mm L, Steel Body, 100 PK - Self Piercing Rivet,18131PK,PK100, Package Quantity 100.
- DISCO 18125PK Tubular Rivet, 5.3 mm Dia., 4 mm L, Steel Body, 100 PK - Self Piercing Rivet,18125PK,PK100, Package Quantity 100.
- DISCO 18127PK Tubular Rivet, 5.3 mm Dia., 6 mm L, Steel Body, 100 PK - Self Piercing Rivet,18127PK,PK100, Package Quantity 100.
- DISCO 18122PK Tubular Rivet, 3.35 mm Dia., 4 mm L, Steel Body, 200 PK - Self Piercing Rivet,18122PK,PK200, Package Quantity 200.
- DISCO 18123PK Tubular Rivet, 3.35 mm Dia., 5 mm L, Steel Body, 200 PK - Self Piercing Rivet,18123PK,PK200, Package Quantity 200.
- DISCO 18133PK Tubular Rivet, 5.3 mm Dia., 10 mm L, Steel Body, 100 PK - Self Piercing Rivet,18133PK,PK100, Package Quantity 100.
- ZORO SELECT 5ZVN0 Liner Rivet, 3/16 x 5/8 In.,PK500 - Liner Rivet, Anchor Head Style Dome, Anchor Body Material Aluminum, Anchor Body Finish Plain, Pin Material Aluminum, Anchor Dia. 3/16 in, Anchor Length 5/8 in, Package Quantity 500.
- ZORO SELECT 5ZVL5 Driven Rivet, 1/4 x 19/32 In.,PK500 - Driven Rivet, Anchor Head Style Brazier, Anchor Body Material Aluminum, Anchor Body Finish Plain, Pin Material Aluminum, Anchor Dia. 1/4 in, Anchor Length 19/32 in, Package Quantity 500.
- 40 Pcs RIVET NUT Flat Head Threaded Insert 1/4-20 UNC Carbon Steel SAE - Rivet nuts can be installed in many different kinds of material, including steel, plastic and fiberglass. Thread Type : Unc. Thread Size： 1/4-20 UNC. Material: Carbon Steel (Zinc Plated). Material : Zinc plated, Aluminum, Carbon Steel, Zinc_yellow_plating, Plastic, Steel.
- Zoro Select Tac0606-100 Semi-Tubular Rivet, Oval Head, 3/32 In Dia., 3/16 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 3/32 In., Rivet Length 3/16 In., Head Dia. 0.147 In., Head Height 0.023 In., Grip Range 0.120 to 0.149 In., Head Angle (Deg.).
- Zoro Select Tac1210.1-100 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 5/16 In - Zoro Select Semi-Tubular Rivet include characteristics like: Head Type: Truss, Finish: Plain, Rivet Material: Aluminum. ZORO SELECT. Redhat 8262H260 120V Ac Brass Solenoid Valve, Normally Open, 1/4 In Pipe Size.
- Zoro Select Tac0914.1-100 Semi-Tubular Rivet, Truss Head, 9/64 In Dia., 7/16 In - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 9/64 In., Rivet Length 7/16 In., Head Dia. 0.312 In., Head Height 0.040 In., Grip Range 0.337 to 0.367 In., Head Angle (Deg.).
- Zoro Select Tbc1218.1-50 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 9/16 In - ZORO SELECT. Zoro Select U20300.075.2400 Fully Threaded Rod, 3/4"-10, 2 Ft, Steel, Grade A. Zoro Select 109-862 Float Ball,Round,Plastic,6 In. Tamper-Pruf Screw 400440 1/4"-20 X 2 1/2 In Torx Button Machine Screw, Zinc.
- Zoro Select Tac0406-100 Semi-Tubular Rivet, Oval Head, 1/16 In Dia., 3/16 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 1/16 In., Rivet Length 3/16 In., Head Dia. 0.109 In., Head Height 0.017 In., Grip Range 0.136 to 0.166 In., Head Angle (Deg.).
- Zoro Select Tfc0607-100 Semi-Tubular Rivet, Oval Head, 3/32 In Dia., 7/32 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 3/32 In., Rivet Length 7/32 In., Head Dia. 0.147 In., Head Height 0.023 In., Grip Range 0.151 to 0.180 In., Head Angle (Deg.).
- Zoro Select Tfc0914.1-25 Semi-Tubular Rivet, Truss Head, 9/64 In Dia., 7/16 In - Take a look at the features for Zoro Select Semi-Tubular Rivet. Head Type: Truss, Finish: Plain, Rivet Material: Stainless Steel. ZORO SELECT. Zoro Select 72320Np Locking Plug,Black/White,347/600Vac,20A.
- Zoro Select Tac0808-100 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 1/4 In L, - In many cases, if the material to be penetrated is soft enough, the edge of the tubular rivet will "self-pierce" through the material. Take a look at the features for Zoro Select Semi-Tubular Rivet.
- Zoro Select Tfc1206.0-50 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 3/16 In - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 3/16 in, Rivet Length 3/16 in, Head Dia. 0.375 in, Head Height 0.06 in, Grip Range 0.057 to 0.097 in, Head Angle (Deg.).
- Zoro Select 1Hbr1 Semi-Tubular Rivet, Truss Head, 9/64 In Dia., 3/8 In L, Steel - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 9/64 in, Rivet Length 3/8 in, Head Dia. 0.312 in, Head Height 0.04 in, Grip Range 0.275 to 0.305 in, Head Angle (Deg.).
- New Section Rivets Oval Head #5-1/2 (.211 in.) 491-R10625 1203805 5/8 Inch Long - New Section Rivets Oval Head 491-R10625.
- 100Pcs 4mm x 25mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2mm x 5mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2.5mm x 8mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2.5mm x 10mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 4mm x 20mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 25Pcs 5mm x 32mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2mm x 18mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 50Pcs 5mm x 28mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2mm x 16mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 3mm x 9mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 6mm x 20mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 3mm x 10mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 50Pcs 6mm x 30mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 6mm x 10mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2.5mm x 14mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 4mm x 22mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 4mm x 12mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 3mm x 18mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 6mm x 12mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 50Pcs 6mm x 14mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 25Pcs 6mm x 18mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 5mm x 20mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2mm x 12mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 4mm x 16mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 3mm x 14mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2mm x 14mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs M0.9/1.3/1.5/1.7/2/2.3/2.5/3/4/5/6 Brass Hollow Tubular Rivets Eyelet DIY - 100Pcs Brass Hollow Tubular Rivets Eyelet Lining Rivets. ● Material: Brass.
- 100Pcs 6mm x 8mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions:Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward.The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 6mm x 8mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions:Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward.The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 16 Pcs RIVET NUT Flat Head Threaded Insert 1/4-20 UNC Carbon Steel SAE - Rivet nuts can be installed in many different kinds of material, including steel, plastic and fiberglass. Thread Type : Unc. Thread Size： 1/4-20 UNC. Material: Carbon Steel (Zinc Plated). Material : Zinc plated, Aluminum, Carbon Steel, Zinc_yellow_plating, Plastic, Steel.
- 12 Pcs RIVET NUT Flat Head Threaded Insert 1/4-20 UNC Carbon Steel SAE - Rivet nuts can be installed in many different kinds of material, including steel, plastic and fiberglass. Thread Type : Unc. Thread Size： 1/4-20 UNC. Material: Carbon Steel (Zinc Plated). Material : Zinc plated, Aluminum, Carbon Steel, Zinc_yellow_plating, Plastic, Steel.
- 8 Pcs RIVET NUT Flat Head Threaded Insert 1/4-20 UNC Carbon Steel SAE - Rivet nuts can be installed in many different kinds of material, including steel, plastic and fiberglass. Thread Type : Unc. Thread Size： 1/4-20 UNC. Material: Carbon Steel (Zinc Plated). Material : Zinc plated, Aluminum, Carbon Steel, Zinc_yellow_plating, Plastic, Steel.
- 304 Stainless Steel Oval Head Semi Tubular Rivets M5 M6 M8 - Size:Select M5 M6 M8. Head Style:Oval Head.
- 304 Stainless Steel Oval Head Semi - Tubular Rivets M5 M6 M8 - Size:Select M5 M6 M8. Head Style:Oval Head.
- 304 Stainless Steel Oval Head Semi - Tubular Rivets M5 M6 M8 - Size:Select M5 M6 M8. Head Style:Oval Head.
- 304 Stainless Steel Oval Head Semi Tubular Rivets M2 M2.5 M3 M4 - Size:Select M2 M2.5 M3 M4. Head Style:Oval Head.
- 304 Stainless Steel Oval Head Semi Tubular Rivets M2 M2.5 M3 M4 - Size:Select M2 M2.5 M3 M4. Head Style:Oval Head.
- Brass Tubular Rivets Hollow Rivet Eyelet M0.9 - M6 Threadless Rivets Grommets - Size:M0.9 M1.3 M1.5 M1.7 M2 M2.3 M2.5 M3 M3.5 M4 M5 M6. Material: Brass. Size=（d x L）.
- M0.9 - M6 Copper Brass Eyelet Hollow Tubular Rivets Through Nuts Hole Grommets - Size: M0.9/M1.3/M1.5/M1.7/M2/M2.3/M2.5/M3/M3.5/M4/M5/M6. Model: Eyelet Hollow Tubular Rivets. Material: Brass.
- Zoro Select Tbc0814-100 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 7/16 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 1/8 in, Rivet Length 7/16 in, Head Dia. 0.218 in, Head Height 0.034 in, Grip Range 0.348 to 0.379 in, Head Angle (Deg.).
- M3 M3.5 M4 M5 M6 Brass Eyelet Hollow Tubular Rivets Through Nuts Hole Grommets - Type: Tubular Rivets. Material: Brass.
- M0.9 - M2.5 Brass Eyelet Hollow Tubular Rivets Through Nuts Hole Grommets - Type: Tubular Rivets. Material: Brass.
- M0.9 to M6 Copper Brass Eyelet Hollow Tubular Rivets Through Nuts Hole Grommets - Size Classification : M0.9-M6.
- M0.9 - M6 Copper Brass Eyelet Hollow Tubular Rivets Through Nuts Hole Grommets - Size: M0.9/M1.3/M1.5/M1.7/M2/M2.3/M2.5/M3/M3.5/M4/M5/M6. Model: Eyelet Hollow Tubular Rivets. Material: Brass.
- 9/64" x 1/4" Semi Tubular Steel Rivets Tin Plated 100 Pcs. U.S.A. #1161 - 9/64" x 1/4" Semi Tubular Steel Rivets Tin Plated 100 Pcs. Finish: Tin Plated. Material: Steel. Make: Cobb & Drew Co. Massachusetts, U.S.A. ( Closed ).
- Lot 100 Truss Head Semi-Tubular Steel Rivet 3/16" x 3/4" Long x 5/8" Grip Length - There was no manufacturer or part number, but they were probably made in the USA. They are non-plated steel, so you do not have to worry about zinc flakes falling into your devices when spinning these.
- 1/8" x 3/16" Semi Tubular Aluminum Truss Hd. Rivets Vintage 100 Pcs. - Judson L. Thomson 1/8" x 3/16" Semi Tubular Aluminum Truss Hd. Style Head: Truss Head. trade making bifurcated and tubular rivets. Type: Semi Tubular. Material: Aluminum. My Family has been in the hardware.
- 100Pcs 6mm x 10mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- Brass Eyelet Button Rivets M0.9~M6 Hollow Brass Rivet Through Hole Rivets - Material: Brass. Length not including the cap.
- Nutsert Inserts Alloy Steel M3 - M10 Packs of 10 - Nutsert Inserts. Sizes M3, M4, M5, M6, M8, M10. Made from Alloy Steel.
- 100Pcs 4mm x 18mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions:Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 200Pcs 4mm x 8mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2mm x 14mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 50Pcs 5mm x 25mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 6mm x 20mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 5mm x 20mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100 ~ 085 / .089 Diameter x 1/2" long x 9/64 Pure Brass Semi Tubular Rivets
- .50 ~ 085 / .089 Diameter x 1/2" long x 9/64 Pure Brass Semi Tubular Rivets
- 50Pcs 6mm x 30mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2.5mm x 6mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 3mm x 14mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 25Pcs 5mm x 32mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 200Pcs 3mm x 8mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- Zoro Select Tsc1206.2-100 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 3/16 In - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 3/16 In., Rivet Length 3/16 In., Head Dia. 0.375 In., Head Height 0.060 In., Grip Range 0.057 to 0.097 In., Head Angle (Deg.).
- Zoro Select Tsc0816-100 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 1/2 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 1/8 In., Rivet Length 1/2 In., Head Dia. 0.218 In., Head Height 0.034 In., Grip Range 0.411 to 0.442 In., Head Angle (Deg.).
- Zoro Select Tac0906.1-100 Semi-Tubular Rivet, Truss Head, 9/64 In Dia., 3/16 In - Take a look at the features for Zoro Select Semi-Tubular Rivet. Head Type: Truss, Finish: Plain, Rivet Material: Aluminum. ZORO SELECT. Stanley Engineered Fastening Sd46bslf201 Blind Rivet, Large Flanged Head, 1/8.
- Zoro Select Tac0816-100 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 1/2 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 1/8 In., Rivet Length 1/2 In., Head Dia. 0.218 In., Head Height 0.034 In., Grip Range 0.411 to 0.442 In., Head Angle (Deg.).
- Zoro Select Tfc0908.2-50 Semi-Tubular Rivet, Truss Head, 9/64 In Dia., 1/4 In - This Semi-Tubular Rivet includes characteristics like: HEAD TYPE: Truss, FINISH: Plain, RIVET MATERIAL: Stainless Steel. ZORO SELECT. Zoro Select 10E752 Parts Tray,Magnetic,5-1/2X9-1/2X1-1/2,Ss. Peerless 3-010-38-86- Center Board Pulley Block, Fibrous Rope, 3/8" Max Cable.
- Zoro Select Tfc0804-100 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 1/8 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 1/8 in, Rivet Length 1/8 in, Head Dia. 0.218 in, Head Height 0.034 in, Grip Range 0.036 to 0.067 in, Head Angle (Deg.).
- Zoro Select Tfc0605-100 Semi-Tubular Rivet, Oval Head, 3/32 In Dia., 5/32 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 3/32 In., Rivet Length 5/32 In., Head Dia. 0.147 In., Head Height 0.023 In., Grip Range 0.089 to 0.118 In., Head Angle (Deg.).
- Zoro Select Tfc0910.4-50 Semi-Tubular Rivet, Truss Head, 9/64 In Dia., 5/16 In - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 9/64 in, Rivet Length 5/16 in, Head Dia. 0.312 in, Head Height 0.04 in, Grip Range 0.212 to 0.242 in, Head Angle (Deg.).
- Zoro Select 1Hbp2 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 9/32 In L, Steel - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 1/8 in, Rivet Length 9/32 in, Head Dia. 0.218 in, Head Height 0.034 in, Grip Range 0.192 to 0.223 in, Head Angle (Deg.).
- Zoro Select 1Hbr6 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 5/16 In L, - ZORO SELECT. Zoro Select 4Fmk3 Vacuum Gauge,Test,2 In. General Purpose. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes.
- Zoro Select Tac1616.1-50 Semi-Tubular Rivet, Oval Head, 1/4 In Dia., 1/2 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 1/4 in, Rivet Length 1/2 in, Head Dia. 0.437 in, Head Height 0.078 in, Grip Range 0.318 to 0.380 in, Head Angle (Deg.).
- Zoro Select Tsc1208.1-100 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 1/4 In - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 3/16 in, Rivet Length 1/4 in, Head Dia. 0.375 in, Head Height 0.06 in, Grip Range 0.120 to 0.160 in, Head Angle (Deg.).
- Zoro Select Tsc0606-9-100 Semi-Tubular Rivet, Oval Head, 3/32 In Dia., 3/16 In - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 3/32 in, Rivet Length 3/16 in, Head Dia. 0.147 in, Head Height 0.023 in, Grip Range 0.120 to 0.149 in, Head Angle (Deg.).
- Zoro Select Tac1206.1-100 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 3/16 In - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 3/16 in, Rivet Length 3/16 in, Head Dia. 0.375 in, Head Height 0.06 in, Grip Range 0.057 to 0.097 in, Head Angle (Deg.).
- Zoro Select 1Hbp8 Semi-Tubular Rivet, Truss Head, 9/64 In Dia., 1/4 In L, Steel - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 9/64 In., Rivet Length 1/4 In., Head Dia. 0.312 In., Head Height 0.040 In., Grip Range 0.150 to 0.180 In., Head Angle (Deg.).
- Zoro Select Tbc0804.1-100 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 1/8 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 1/8 in, Rivet Length 1/8 in, Head Dia. 0.218 in, Head Height 0.034 in, Grip Range 0.036 to 0.067 in, Head Angle (Deg.).
- Zoro Select Tac1212.1-100 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 3/8 In - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 3/16 In., Rivet Length 3/8 In., Head Dia. 0.375 In., Head Height 0.060 In., Grip Range 0.245 to 0.285 In., Head Angle (Deg.).
- Zoro Select 1Hee8 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 1/4 In L, - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 3/16 In., Rivet Length 1/4 In., Head Dia. 0.375 In., Head Height 0.060 In., Grip Range 0.120 to 0.160 In., Head Angle (Deg.).
- Zoro Select Tac1620-50 Semi-Tubular Rivet, Oval Head, 1/4 In Dia., 5/8 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 1/4 in, Rivet Length 5/8 in, Head Dia. 0.437 in, Head Height 0.078 in, Grip Range 0.443 to 0.505 in, Head Angle (Deg.).
- Zoro Select Tsc1618.1-50 Semi-Tubular Rivet, Oval Head, 1/4 In Dia., 9/16 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 1/4 In., Rivet Length 9/16 In., Head Dia. 0.437 In., Head Height 0.078 In., Grip Range 0.380 to 0.442 In., Head Angle (Deg.).
- 100 Plain Steel Truss Head Semi-Tubular Rivets 3/16" Dia x 7/8" Long / 3/4" Grip - There was no manufacturer or part number, but they were probably made in the USA. They are non-plated steel, so you do not have to worry about zinc flakes falling into your devices when spinning these.
- Lot 100 Plain Steel Truss Head Semi-Tubular Rivet 3/16" x 3/4" Long / 5/8" Grip - There was no manufacturer or part number, but they were probably made in the USA. They are non-plated steel, so you do not have to worry about zinc flakes falling into your devices when spinning these.
- Brass Eyelet Hollow Tubular Rivets Through Nut Hole Grommets M3 M3.5 M4 M5 M6 - Types: Tubular Rivets. -Material: Brass.
- Brass Eyelet Hollow Tubular Rivets Through Nut Grommets M0.9 M1.3 M1.5 M1.7-M2.5 - Types: Tubular Rivets. -Material: Brass.
- Blind Brass Threaded Rivet Nuts Knurled Head Nutserts M3 M4 M5 M6 Copper - Knurled - Serrated - Steel Large Head Rivnuts Rivet Nuts Nutserts Blind. M4 4/M4 5/M4 6/M4 7/M4 8/M4 10/. M6 4/M6 5/M6 6/M6 8/M6 10/M6 12. M5 4/M5 5/M5 6/M5 7/M5 8/M5 10/M5 12/. M3 3/M3 4/M3 5/M3 6/M3 7/M3 8/M3 9/M3 10/M3 12/.
- M3 M4 M5 M6 Blind Brass Threaded Rivet Nuts Knurled Head Nutserts Copper - Blind Brass Threaded Rivet Nuts Knurled Head Nutserts M3 M4 M5 M6 Copper. Knurled - Serrated - Steel Large Head Rivnuts Rivet Nuts Nutserts Blind. M4 4/M4 5/M4 6/M4 7/M4 8/M4 10/. M6 4/M6 5/M6 6/M6 8/M6 10/M6 12.
- 50 Pieces 3/16" x 3/4" Alum Rivets 5/8" Head Semi-Tubular - To be sure of size.
- FlowServe 1014887 STL Hex Screw 1.125"x2.750" Lot of 8 ! NWB !
- Dresser Rand EAZP1001 Crankshaft Wall Bearing Liner 7-3/4"OD 7"ID 4"W NEW - Check-Out Now! Due to the multiple quantities available, you may not receive the item pictured in the ad above. Part Number 100020153 35171.
- FlowServe 95105573 314 Hex Cap Screw .750" x 4.500" Lot of 8 ! NWB !
- Dresser Rand EAZP1001 Crankshaft Wall Bearing Liner 7-3/4"OD 7"ID 4"W ! NEW !
- 250 Pcs RIVET NUT Flat Head Threaded Insert 1/4-20 UNC Carbon Steel SAE - Rivet nuts can be installed in many different kinds of material, including steel, plastic and fiberglass. Thread Type : Unc. Thread Size： 1/4-20 UNC. Material: Carbon Steel (Zinc Plated). Material : Zinc plated, Aluminum, Carbon Steel, Zinc_yellow_plating, Plastic, Steel.
- 100 Pcs RIVET NUT Flat Head Threaded Insert 1/4-20 UNC Carbon Steel SAE - 100pcs rivet nut. Rivet nuts can be installed in many different kinds of material, including steel, plastic and fiberglass. Thread Type : Unc. Thread Size： 1/4-20 UNC. Material: Carbon Steel (Zinc Plated).
- 200 Rivets 1/16"x1/8"Stainless Steel Semi-Tubular
- Forty (40) 3/8-16 UNC Rivet Nuts - Zinc Plated Carbon Steel Flat Head Threaded I - This one-piece threaded counter-bored tubular rivet can be anchored entirely from one side of the material in which it's installed. Rivet nuts can be installed in many different material types including steel, plastic and fiberglass.
- Brass Hollow Rivet Single Tube Rivets Through The Hole Sleeves M0.9 M1.3 M2-M6
- Zoro Select Tsc1616.1-100 Semi-Tubular Rivet, Oval Head, 1/4 In Dia., 1/2 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 1/4 in, Rivet Length 1/2 in, Head Dia. 0.437 in, Head Height 0.078 in, Grip Range 0.318 to 0.380 in, Head Angle (Deg.).
- Zoro Select 1Hef1 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 3/8 In L, - Zoro Select Semi-Tubular Rivet include characteristics like: Head Type: Truss, Finish: Plain, Rivet Material: Stainless Steel. ZORO SELECT. Zoro Select 4Rwd9 Plow Bolt,Plain,5/8-11X4-1/2,Gr 8,Pk110. Zoro Select 2Fdj9 Wallpaper Brush,Wood,Length 12 In.
- M0.9M2.0M2.3M2.5M3 Brass Tubular Hollow Rivet Eyelets Vias Grommets, PCB Rivet - Size: M0.9M2.0M2.3M2.5M3. Material: Brass.
- Zoro Select 1Hed2 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 3/16 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 1/8 In., Rivet Length 3/16 In., Head Dia. 0.218 In., Head Height 0.034 In., Grip Range 0.098 to 0.129 In., Head Angle (Deg.).
- DISCO 18124PK Tubular Rivet, 3.35 mm Dia., 6 mm L, Steel Body, 200 PK - Self Piercing Rivet,18124PK,PK200, Package Quantity 200.
- DISCO 18128PK Tubular Rivet, 5.3 mm Dia., 6.5 mm L, Steel Body, 100 PK - Self Piercing Rivet,18128PK,PK100, Package Quantity 100.
- DISCO 18126PK Tubular Rivet, 5.3 mm Dia., 5 mm L, Steel Body, 100 PK - Self Piercing Rivet,18126PK,PK100, Package Quantity 100.
- DISCO 18129PK Tubular Rivet, 5.3 mm Dia., 7 mm L, Steel Body, 100 PK - Self Piercing Rivet,18129PK,PK100, Package Quantity 100.
- DISCO 18132PK Tubular Rivet, 5.3 mm Dia., 9 mm L, Steel Body, 100 PK - Self Piercing Rivet,18132PK,PK100, Package Quantity 100.
- DISCO 18121PK Tubular Rivet, 3.35 mm Dia., 3.5 mm L, Steel Body, 200 PK - Self Piercing Rivet,18121PK,PK200, Package Quantity 200.
- DISCO 18134PK Tubular Rivet, 5.3 mm Dia., 12 mm L, Steel Body, 100 PK - Self Piercing Rivet,18134PK,PK100, Package Quantity 100.
- M4 M5 M6 Copper Brass Vias Rivet Nuts Through Hole Rivets Hollow Grommets - Type: Brass Rivet Nuts. Material: Brass.
- M0.9 - 1.7 Copper Brass Vias Rivet Nuts Through Hole Rivets Hollow Grommets - Type: Brass Rivet Nuts. Material: Brass.
- M2 M2.3 2mm Copper Brass Vias Rivet Nuts Through Hole Rivets Hollow Grommets - Type: Brass Rivet Nuts. Material: Brass.
- 100Pcs M0.9/1.3/1.5/1.7/2/2.3/2.5/3/4/5/6 Brass Hollow Tubular Rivets Eyelet DIY - 100Pcs Brass Hollow Tubular Rivets Eyelet Lining Rivets. ● Material: Brass.
- 350 Rivets Steel NICKEL Semi Tubular 9/64" Dia x 9/32" Grip Lgth, 5/16" Head Dia - One Lot = One hundred seventy five (175) Rivets. Grip length (underside of head to beginning of tubular interior).281" / 7.14 MM. Shank length (underside of head to tip).568" / 14.43 MM.
- 100Pcs 4mm x 14mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- Brass Hollow Rivets Tubular Eyelet M0.9 M1.3 M1.5 M1.7 M2 M2.3 M2.5 M3 M4 M5 M6 - Size: M0.9 M1.3 M1.5 M1.7 M2 M2.3 M2.5 M3 M4 M5 M6. Model: Brass Hollow Rivets Tubular Eyelet. Material: Brass.
- Album Purse Copper Plated Binding Chicago Screw Post M5 Leather Rivets 6mm-100mm - For example: M5 100 (The pole is 5mm thick and the pole length is 100mm). Material: Copper Plated.
- Zoro Select Tbc0603-100 Semi-Tubular Rivet, Oval Head, 3/32 In Dia., 3/32 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 3/32 In., Rivet Length 3/32 In., Head Dia. 0.147 In., Head Height 0.023 In., Grip Range 0.027 to 0.056 In., Head Angle (Deg.).
- 25Pcs 5mm x 35mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- Zoro Select Tac0810-100 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 5/16 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 1/8 In., Rivet Length 5/16 In., Head Dia. 0.218 In., Head Height 0.034 In., Grip Range 0.223 to 0.254 In., Head Angle (Deg.).
- Zoro Select Tsc0808-3-100 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 1/4 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 1/8 in, Rivet Length 1/4 in, Head Dia. 0.218 in, Head Height 0.034 in, Grip Range 0.161 to 0.192 in, Head Angle (Deg.).
- Zoro Select Tbc0404-100 Semi-Tubular Rivet, Oval Head, 1/16 In Dia., 1/8 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 1/16 In., Rivet Length 1/8 In., Head Dia. 0.109 In., Head Height 0.017 In., Grip Range 0.074 to 0.104 In., Head Angle (Deg.).
- Zoro Select Tsc0404-100 Semi-Tubular Rivet, Oval Head, 1/16 In Dia., 1/8 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 1/16 In., Rivet Length 1/8 In., Head Dia. 0.109 In., Head Height 0.017 In., Grip Range 0.074 to 0.104 In., Head Angle (Deg.).
- Zoro Select 1Hcl7 Semi-Tubular Rivet, Truss Head, 9/64 In Dia., 1/4 In L, - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 9/64 in, Rivet Length 1/4 in, Head Dia. 0.312 in, Head Height 0.04 in, Grip Range 0.150 to 0.180 in, Head Angle (Deg.).
- Zoro Select Tsc0607-100 Semi-Tubular Rivet, Oval Head, 3/32 In Dia., 7/32 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 3/32 In., Rivet Length 7/32 In., Head Dia. 0.147 In., Head Height 0.023 In., Grip Range 0.151 to 0.180 In., Head Angle (Deg.).
- Zoro Select 1Hbn7 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 5/32 In L, Steel - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 1/8 in, Rivet Length 5/32 in, Head Dia. 0.218 in, Head Height 0.034 in, Grip Range 0.067 to 0.098 in, Head Angle (Deg.).
- Zoro Select Tbc1220.1-50 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 5/8 In - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 3/16 in, Rivet Length 5/8 in, Head Dia. 0.375 in, Head Height 0.06 in, Grip Range 0.495 to 0.535 in, Head Angle (Deg.).
- Zoro Select Bsz03-100 Semi-Tubular Rivet, Truss Head, 9/64 In Dia., 3/16 In L, - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 9/64 in, Rivet Length 3/16 in, Head Dia. 0.312 in, Head Height 0.04 in, Grip Range 0.087 to 0.117 in, Head Angle (Deg.).
- Zoro Select Bscn06-100 Tubular Rivet, Countersunk Head, 9/64 In Dia., 3/8 In L, - Tubular Rivet, Rivet Head Style Countersunk, Rivet Body Material Steel, Fastener Finish Nickel Plated, Rivet Dia. 9/64 in, Rivet Length 3/8 in, Head Dia. 0.313 in, Head Height 0.04 in, Grip Range 0.235 to 0.304 in, Head Angle (Deg.).
- Zoro Select Tac0804-100 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 1/8 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 1/8 in, Rivet Length 1/8 in, Head Dia. 0.218 in, Head Height 0.034 in, Grip Range 0.036 to 0.067 in, Head Angle (Deg.).
- Zoro Select Tac0809-100 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 9/32 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 1/8 in, Rivet Length 9/32 in, Head Dia. 0.218 in, Head Height 0.034 in, Grip Range 0.192 to 0.223 in, Head Angle (Deg.).
- Zoro Select Tbc0406-100 Semi-Tubular Rivet, Oval Head, 1/16 In Dia., 3/16 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 1/16 in, Rivet Length 3/16 in, Head Dia. 0.109 in, Head Height 0.017 in, Grip Range 0.136 to 0.166 in, Head Angle (Deg.).
- 100 Qty #10-32 x 5/16" Zinc Plated Three Prong Tee Nuts - 3 prong coarse thread plated.
- Zoro Select Tfc1220.3-50 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 5/8 In - Take a look at the features for this Semi-Tubular Rivet : HEAD TYPE: Truss, FINISH: Plain, RIVET MATERIAL: Stainless Steel. ZORO SELECT. Zoro Select Zusa-Ht-27 Reinforced Clear Pvc Tubing, 1/2" Id X 3/4" Od X 50 Ft. L.
- Zoro Select Tac0604-100 Semi-Tubular Rivet, Oval Head, 3/32 In Dia., 1/8 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 3/32 in, Rivet Length 1/8 in, Head Dia. 0.147 in, Head Height 0.023 in, Grip Range 0.058 to 0.087 in, Head Angle (Deg.).
- Zoro Select Tac0608-100 Semi-Tubular Rivet, Oval Head, 3/32 In Dia., 1/4 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 3/32 In., Rivet Length 1/4 In., Head Dia. 0.147 In., Head Height 0.023 In., Grip Range 0.183 to 0.212 In., Head Angle (Deg.).
- Zoro Select Tac0603-100 Semi-Tubular Rivet, Oval Head, 3/32 In Dia., 3/32 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 3/32 in, Rivet Length 3/32 in, Head Dia. 0.147 in, Head Height 0.023 in, Grip Range 0.027 to 0.056 in, Head Angle (Deg.).
- M0.9 M1.3-M6 Brass Hollow Rivet Single Tube Rivets Through The Hole Sleeves
- Copper Brass Vias Rivet Nuts M0.9 - M6 Through Hole Rivets Hollow Grommets - Material: Brass. Due to the differences in shooting scenes and technology, there will be a chromatic aberration between the photos and actual colors.
- Zoro Select Tbc0810-100 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 5/16 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 1/8 in, Rivet Length 5/16 in, Head Dia. 0.218 in, Head Height 0.034 in, Grip Range 0.223 to 0.254 in, Head Angle (Deg.).
- Zoro Select Tac1216.1-100 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 1/2 In - Take a look at the features for this Semi-Tubular Rivet : HEAD TYPE: Truss, FINISH: Plain, RIVET MATERIAL: Aluminum. ZORO SELECT. Faztek 13Ft9025-72 Framing Extrusion,Single Channel,L 72 In. Stanley Engineered Fastening 5402-9 Thread Repair Kit,304 Ss,9/16-18,6 Pcs.
- Zoro Select Tfc0606-100 Semi-Tubular Rivet, Oval Head, 3/32 In Dia., 3/16 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 3/32 in, Rivet Length 3/16 in, Head Dia. 0.147 in, Head Height 0.023 in, Grip Range 0.120 to 0.149 in, Head Angle (Deg.).
- Zoro Select 1Hbw4 Semi-Tubular Rivet, Truss Head, 9/64 In Dia., 5/16 In L, - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 9/64 In., Rivet Length 5/16 In., Head Dia. 0.312 In., Head Height 0.040 In., Grip Range 0.212 to 0.242 In., Head Angle (Deg.).
- Zoro Select Tfc0604-100 Semi-Tubular Rivet, Oval Head, 3/32 In Dia., 1/8 In L, - Product specs for this Semi-Tubular Rivet include the following: HEAD TYPE: Oval, FINISH: Plain, RIVET MATERIAL: Stainless Steel. ZORO SELECT. Zoro Select B38130.037.0001 Flat Washer, Fits Bolt Size 3/8 In Steel, Zinc.
- Zoro Select Tfc0906.2-50 Semi-Tubular Rivet, Truss Head, 9/64 In Dia., 3/16 In - Zoro Select Semi-Tubular Rivet include characteristics like: Head Type: Truss, Finish: Plain, Rivet Material: Stainless Steel. ZORO SELECT. Zoro Select 2Rzj1 Caster Wheel,450 Lb.,6 D X 2 In. General Purpose.
- Zoro Select Tfc0812.0-50 Semi-Tubular Rivet, Oval Head, 1/8 In Dia., 3/8 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 1/8 in, Rivet Length 3/8 in, Head Dia. 0.218 in, Head Height 0.034 in, Grip Range 0.286 to 0.317 in, Head Angle (Deg.).
- Zoro Select Tbc1612-50 Semi-Tubular Rivet, Oval Head, 1/4 In Dia., 3/8 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Brass, Fastener Finish Plain, Rivet Dia. 1/4 in, Rivet Length 3/8 in, Head Dia. 0.437 in, Head Height 0.078 in, Grip Range 0.193 to 0.255 in, Head Angle (Deg.).
- Zoro Select Tfc1616.3-25 Semi-Tubular Rivet, Oval Head, 1/4 In Dia., 1/2 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 1/4 in, Rivet Length 1/2 in, Head Dia. 0.437 in, Head Height 0.078 in, Grip Range 0.318 to 0.380 in, Head Angle (Deg.).
- Zoro Select Tac1618.1-50 Semi-Tubular Rivet, Oval Head, 1/4 In Dia., 9/16 In L, - Semi-Tubular Rivet, Rivet Head Style Oval, Rivet Body Material Aluminum, Fastener Finish Plain, Rivet Dia. 1/4 In., Rivet Length 9/16 In., Head Dia. 0.437 In., Head Height 0.078 In., Grip Range 0.380 to 0.442 In., Head Angle (Deg.).
- Zoro Select Tfc1210.1-50 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 5/16 In - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Stainless Steel, Fastener Finish Plain, Rivet Dia. 3/16 in, Rivet Length 5/16 in, Head Dia. 0.375 in, Head Height 0.06 in, Grip Range 0.182 to 0.222 in, Head Angle (Deg.).
- Zoro Select Tbc0914.0-100 Semi-Tubular Rivet, Truss Head, 9/64 In Dia., 7/16 In - In many cases, if the material to be penetrated is soft enough, the edge of the tubular rivet will "self-pierce" through the material. Head Type: Truss, Finish: Plain, Rivet Material: Brass. ZORO SELECT.
- Zoro Select Tsc1212.0-100 Semi-Tubular Rivet, Truss Head, 3/16 In Dia., 3/8 In - Semi-Tubular Rivet, Rivet Head Style Truss, Rivet Body Material Steel, Fastener Finish Zinc Plated, Rivet Dia. 3/16 in, Rivet Length 3/8 in, Head Dia. ZORO SELECT. Zoro Select M55050.060.0010 M6-1.00 Socket Head Cap Screw, Plain Stainless.
- aluminum semi-tubular rivet(s) 25 pcs. 1 7/16" X 3/16" - 1 7/16" X 3/16". Lot of 25 pieces as pictured.
- M0.9-M6 Metric Brass Eyelet Hollow Tubular Rivets Through Nuts Hole Grommets - Material: Brass.
- M0.9-M3 Brass Hollow Rivet Eyelet Hollow Tubular Rivet Through Nut Grommets - Specification：M0.9 M1.3 M1.5 M1.7 M2 M2.3 M2.5 M3. Material: Brass.
- 9/64" X 1/16" Grip Semi-Tubular Rivet Steel .315" Truss Head LOT OF 500 Pc Bulk - SOLD AS A LOT OF 500! MATERIAL - ZINC PLATED STEEL. LOCATION - BOX #1047. MANUFACTURER PART NUMBER. FITS MODEL. NEW PARTS AND TOOLS ARE PROVIDED DIRECT BY MANUFACTURER. ALL TOOLS AND SUPPLIES HAVE BEEN CHECKED FOR FLAWS, CRACKS, DEFECTS, ETC.
- Lot Of 500 Brass Rivets - Lot Of 500 Brass Rivets. Im not very familiar with these so check out the photos for size. Theyre stamped on the end. Appears to say B&B. I have thousands of these so if youre intersted in quantity message me. Check out the photos and message me with any questions you might have.
- Brass Eyelets Vias Hollow Tubular Rivets M0.9 1.3 1.5 1.7 2 2.3 2.5 3 3.5 4 5 M6 - Material: Brass.
- Thirty (30) M12 Rivet Nuts - Zinc Plated Carbon Steel Flat Head Threaded Metric - This one-piece threaded counter-bored tubular rivet can be anchored entirely from one side of the material in which it's installed. Rivet nuts can be installed in many different material types including steel, plastic and fiberglass.
- Fifty (50) M8 Rivet Nuts - Zinc Plated Carbon Steel Flat Head Threaded Metric In - This one-piece threaded counter-bored tubular rivet can be anchored entirely from one side of the material in which it's installed. Rivet nuts can be installed in many different material types including steel, plastic and fiberglass.
- Fifty (50) 3/8-16 x 7/16" Zinc Plated Four Prong Tee Nuts (BCP682) - Tee Nuts are comprised of a long thin body and a flange at one end, resembling a T in profile. The flanges of the T-nuts have hooks or serrations on the prongs that dig into a wooden work piece as the bolt is tightened from the opposite side of the piece, providing better retention.
- Forty (40) M10 Rivet Nuts - Zinc Plated Carbon Steel Flat Head Threaded Metric I - This one-piece threaded counter-bored tubular rivet can be anchored entirely from one side of the material in which it's installed. Rivet nuts can be installed in many different material types including steel, plastic and fiberglass.
- 25 VINTAGE COPPERED 5/16" x 1/8" SEMI HOLLOW TUBULAR RIVETS, 3/8" HEAD
- 25 VINTAGE COPPERED 7/16" x 1/8" SEMI HOLLOW TUBULAR RIVETS, 3/8" HEAD
- M5 Brass Tubular Rivets Vias Rivet Nuts Through Hole Rivets Hollow Grommets - Model: Tubular Rivets. Material: Brass. We will do our best to solve the problems.
- M1.5 M1.7 M2 M2.5 Brass Tubular Rivets Nuts Through Hole Rivets Hollow Grommets - Size: M1.5 M1.7 M2 M2.5. Model: Tubular Rivets. Material: Brass. We will do our best to solve the problems.
- M4 Brass Tubular Rivets Vias Rivet Nuts Through Hole Rivets Hollow Grommets - Model: Tubular Rivets. Material: Brass. We will do our best to solve the problems.
- M3 Brass Tubular Rivets Vias Rivet Nuts Through Hole Rivets Hollow Grommets - Model: Tubular Rivets. Material: Brass. We will do our best to solve the problems.
- 50-pack of 1018 Steel Semi-Tubular Rivets - 1018 Steel.
- 95-pack of 1010 Steel Semi-Tubular Rivets - Zinc & Clear Trivalent Chromate 384/96 Hrs Salt Spray (.008 Minimum Thick). Shoulder Length: 9.25 mm. Length Under Head: 26.35 mm.
- 30-pack of 1010 Steel Double End Rivets - 1010 Steel. 1st Shoulder Length: 1.81 mm. 2nd Shoulder Length: 9.9 mm.
- 5-pack of 1010 Steel Semi-Tubular Rivets, Zinc Yellow Coated - Zinc Yellow Dichromate Plated.
- 50-pack of 1018 Steel Cap Rivets Pickle and Seal Coating - Pickle and Seal Coating. 1018 Steel.
- 30-pack of 1022 Steel Cap Rivets with Zinc & Clear Coating - 1022 Steel. Zinc & Clear Trivalent Coating.
- 100-pack of 1022 Steel Cap Rivets with Phos & Dry to Touch Oil - Phos & Dry to Touch Oil. 1022 Steel.
- 20-pack of 1010 Steel Cap Rivets with Black Finish over Zinc - 1010 Steel. Black Finish over Zinc.
- 80-pack of 1018 Steel Cap Rivets with Zinc and Clear Coating - 1018 Steel. Zinc and Clear Trivalent Chromate 120/240 Salt Spray (.0003 Minimum Thickness). 2nd Shoulder Length (Including 3rd Shoulder): 3.4 to 3.5 mm. 1st Shoulder Length: 4.5 to 5.0 mm.
- 25-pack of 1010 Steel Solid Shoulder Rivets with Zinc and Clear Coating - 1010 Steel. Zinc and Clear Coating (.0003 Minimum Thickness).
- 40-pack of 1010 Steel Rivets with Rust Inhibiting Coating - 1010 Steel. Rust Inhibitor Coating. Small End Length: 4.8 to 5.2 mm.
- 10-pack of 1010 Steel Rivets Zinc & Clear Coating - 1010 Steel. Zinc & Clear Trivalent Chromate Coating. Large Shoulder Length: 11.1 to 11.3mm.
- 30-pack of 1018 Steel Rivets with Rust Inhibiting Coating - 1018 Steel. Rust Inhibitor Coating. Large Shoulder Length: 7.75 to 8.25mm.
- 50-pack of 1010 Steel Semi-Tubular Flat Head Rivets - Zinc and Clear Trivalent Coated. Indent Depth: 3.4 to 4.0 mm.
- 28-pack of 1022 Steel Zinc & Trivalent Chromate Pins - Zinc & Trivalent Chromate Coating. 1022 Steel.
- 10-pack of 1010 Steel Tubular Rivets/Bushings/Pins, Zinc and Olive Drab Plated - Zinc and Olive Drab Plated.
- 35-pack of 1010 Steel Semi-Tubular Rivets, Nickel Plated - Zinc Nickel and Clear Trivalent coated.
- 75-pack of 1010 Steel Semi-Tubular Rivets, Nickel Plated - Electroless Nickel plated (.0002 to. 0005 thick).
- 100-pack of 1010 Steel Semi-Tubular shouldered rivets - Indent Depth: 2.7 to 3.0 mm.
- M0.9 - 1.7 Copper Brass Vias Rivet Nuts Through Hole Rivets Hollow Grommets - Type: Brass Rivet Nuts. Material: Brass.
- Valley Fastener Group RIVETS 5/32" X 5/16" X .166 bag of 2000 - Valley Fastener Group.
- Rivet, Stainless Steel, .140" diameter, .250" long, Semi-hollow (1,000 pcs)
- Rivet, Aluminum, 9/64 diameter, 7/16 long, hollow (1,000 pcs)
- BOOT HOOKS Large SOLID BRASS Boot LACING HOOKS BRASS & STEEL TYPES - BOOT HOOKS. # 110 Large solid brass. Other sizes and finishes available soon.
- 25 Qty #10-24 x 9/32" Stainless Steel Three Prong Tee Nuts (BCP1021) - Tee Nuts are comprised of a long thin body and a flange at one end, resembling a T in profile. The flanges of the T-nuts have hooks or serrations on the prongs that dig into a wooden work piece as the bolt is tightened from the opposite side of the piece, providing better retention.
- 25 Qty #8-32 x 1/4" Stainless Steel Three Prong Tee Nuts (BCP1019) - Tee Nuts are comprised of a long thin body and a flange at one end, resembling a T in profile. The flanges of the T-nuts have hooks or serrations on the prongs that dig into a wooden work piece as the bolt is tightened from the opposite side of the piece, providing better retention.
- 25 Qty 5/16-18 x 3/8" Stainless Steel Four Prong Tee Nuts (BCP1023) - Tee Nuts are comprised of a long thin body and a flange at one end, resembling a T in profile. The flanges of the T-nuts have hooks or serrations on the prongs that dig into a wooden work piece as the bolt is tightened from the opposite side of the piece, providing better retention.
- M3 M4 M5 Copper Brass Eyelet Hollow Tubular Rivets Through Nuts Hole Grommets - Model: Eyelet Hollow Tubular Rivets. Material: Brass. Size: M3/M3.5/M4/M5. We will do our best to solve the problems.
- M3 M4 M5 M6 Copper Brass Eyelet Hollow Tubular Rivets Through Nuts Hole Grommets - Model: Eyelet Hollow Tubular Rivets. Material: Brass. Size: M3/M3.5/M4/M5/M6. We will do our best to solve the problems.
- 100Pcs 3mm x 7mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2mm x 4mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2mm x 6mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- Hillman 2-Pack Tee Nuts 3/8"-16 Thread Zinc Plated Four Prong - Tee Nuts are comprised of a long thin body and a flange at one end, resembling a T in profile. The flanges of the T-nuts have hooks or serrations on the prongs that dig into a wooden work piece as the bolt is tightened from the opposite side of the piece, providing better retention.
- Sherex Fastening M10 Small Flange Steel Threaded River Nut Insert *Pack of 100* - Gates G3H High-Temperature 2-Fiber Braid 1" Hydraulic Hose Sold By The Foot . PICK UP OPTION. Top Biz Buy's. Buy now and save!
- Sherex Fastening M10 Small Flange Steel Threaded River Nut Insert *Pack of 20* - Gates G3H High-Temperature 2-Fiber Braid 1" Hydraulic Hose Sold By The Foot . PICK UP OPTION. Top Biz Buy's. Buy now and save!
- Semi TUBULAR Truss head RIVET 250 & 312 solid Steel NICKEL pl. & BLACK OXIDE pl. - # M312 TRUSS head Semi Tubular Rivet. # L250 (smaller) TRUSS head Semi Tubular Rivet. TUBULAR RIVET Nickel Pl. or Black Oxide Pl. TRUSS head Semi Tubular Rivet. SEMI TUBULAR …DEEP DRILLED. Semi tubular drilled down aprox.
- 25Pcs 6mm x 18mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 4mm x 6mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 200Pcs 4mm x 8mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 4mm x 6mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 4mm x 12mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2mm x 6mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 4mm x 20mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 5mm x 12mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 4mm x 16mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 5mm x 18mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2mm x 16mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 4mm x 25mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 200Pcs 3mm x 8mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2mm x 10mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 6mm x 12mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 3mm x 9mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2mm x 5mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 200Pcs 3mm x 4mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 200Pcs 4mm x 10mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 200Pcs 3mm x 4mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 3mm x 12mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 5mm x 18mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2.5mm x 8mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2mm x 12mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2mm x 4mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2.5mm x 16mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 3mm x 16mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 25Pcs 5mm x 35mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 50Pcs 5mm x 28mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 4mm x 22mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 50Pcs 5mm x 25mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2.5mm x 5mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 3mm x 10mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2.5mm x 12mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 100Pcs 2.5mm x 12mm Aluminum Flat Head Semi-Tubular Rivets Silver Tone - Descriptions: Semi-Tubular Rivets (also known as Tubular Rivets) are similar to solid rivets, except they have a partial hole (opposite the head) at the tip. The purpose of this hole is to reduce the amount of force needed for application by rolling the tubular portion outward. The force needed to apply a semi-tubular rivet is about 1/4 of the amount needed to apply a solid rivet. Tubular Rivets can also be used as pivot points (a joint where movement is preferred) since the swelling of the rivet is only at the tail. Permanent fastener with good joint strength.Rivet clinches can be roll-clinched, segmented (star set), spun, flared or press clinched.Tubular-hole rivets often used to pierce and clinch materials (leather-corrugated-plastic-rubber-fabric) without a pre-drilled or punched work-piece hole.
- 20PCS - Copper Hollow Hole Rivets M0.9 M1.3 M1.5 M1.7 M2 - Hollow Hole Rivets.
- 175 Rivets Steel Black Semi Tubular 9/64" Dia x 9/32" Grip Lgth, 5/16" Head Dia - Grip length (underside of head to beginning of tubular interior).281" / 7.14 MM. Shank length (underside of head to tip).568" / 14.43 MM.
- 225 Steel Black Semi Tubular Rivets 9/64" Dia x 3/16" Grip Lgth, 5/16" Head Dia. - Grip length (underside of head to beginning of tubular interior).187" / 4.76 MM. Shank length (underside of head to tip).437" / 11.11 MM. Head height.045" / 1.10 MM.
- 200PCs Steel White Semi Tubular Rivets 9/64" Diax 5/16" Grip Length, 5/16" Head - Grip length (underside of head to beginning of tubular interior).312" / 7.95 MM. Shank length (underside of head to tip).563" / 14.28 MM. Head height.046" / 1.19 MM.
- 1940 ATLAS #10 COPPER PLATED RIVET BURRS 3/8 DIAMETER 1/8 HOLE 1Lb BOX 600 BURRS - THEY ARE APPROX. THE BOX IS DATED 1940. THERE IS OVER 600 BURRS PER BOX.
- 1940 ATLAS #9 GALVANIZED RIVETS & BURRS 1/2 Lb BOX ASSORTED 3/8, 1/2, 3/4, & 7/8 - THEY ARE ASSORTED 3/8, 1/2, 3/4, & 7/8 LONG. THE BOX IS DATED 1940. THERE IS APPROX. 70 SETS PER BOX.
- 1940 ATLAS #7 COPPER PLATED RIVET BURRS 1/2 DIAMETER 3/16 HOLE 1Lb BOX 420 BURRS - THE BOX IS DATED 1940. THERE IS APPROX. 420 BURRS PER BOX.
- 1940 ATLAS #8 COPPER PLATED RIVET BURRS 1/2 DIAMETER 1/8" HOLE 1Lb BOX 420 BURRS - THE BOX IS DATED 1940. THERE IS APPROX. 420 BURRS PER BOX.
- A2 304 Stainless Steel - Threaded Inserts Rivet Nuts M3 M4 M5 M6 M8 M10 M12 - Threaded Inserts Rivet Nuts. Internally threaded. Material: 304 Stainless Steel. Manufactured from A2 stainless steel for increased corrosion resistance. Grip range 0.5mm~3.5mm. Serrated body to help prevent rotation.
- 100 ct Steel Semi Tubular Rivets 3/16" Diameter x 2" Length, 3/8" Head Dia. - They have slight surface rust from storage (as seen in photos).
- 100 ct Steel Semi Tubular Rivets 3/16" Diameter x 1 1/2" Length, 3/8" Head Dia. - They have surface rust from storage (as seen in photos).
- Aluminum 1 15/16" Pop Rivet Set Of (68) - I am selling a set of (68) aluminum pop rivets. They are new out of the package and come as shown in the pictures. They measure roughly 1 15/16" long overall, above the lip it is roughly 13/16" long with the OD of roughly 1/8" and below the lip it is roughly 1 1/16" long with the OD of roughly 1/16". For more information please contact a dealer in your area. ( HMB / 111 C / 9069611 ) Shipping cost is for the continental United States (lower 48 states) only. For shipping outside of the continental United States please inquire about shipping cost before bidding.
- 5mm Nickel Plated Chicago Screw Posts Binding Screws Binder Posts Leather Rivets
- 5mm Brass Plated Chicago Screw Posts Binding Screws Binder Posts Leather Rivets
- 25 VINTAGE COPPER TONE 1/2" x 1/8" SEMI HOLLOW TUBULAR RIVETS, 3/8" HEAD
- 60pc M6 x (4mm-12mm) Copper Brass Eyelet Hollow Tubular Rivets Through Nuts Kit - Model: Eyelet Hollow Tubular Rivets. M6 12mm x 10PCS. M6 4mm x 10PCS. M6 5mm x 10PCS. M6 6mm x 10PCS. M6 8mm x 10PCS. M6 10mm x 10PCS. Material: Brass.
- 50pc M3.5 x (4mm-8mm) Copper Brass Eyelet Hollow Tubular Rivets Through Nuts Kit - Model: Eyelet Hollow Tubular Rivets. M3.5 4mm x 10PCS. M3.5 8mm x 10PCS. M3.5 5mm x 10PCS. M3.5 6mm x 10PCS. M3.5 7mm x 10PCS. Material: Brass. Standard: GB.
- 100 Qty 3/8-16 x 7/16" Zinc Plated Four Prong Tee Nuts (BCP683) - Tee Nuts are comprised of a long thin body and a flange at one end, resembling a T in profile. The flanges of the T-nuts have hooks or serrations on the prongs that dig into a wooden work piece as the bolt is tightened from the opposite side of the piece, providing better retention.
- 0.089 x 0.094 Semi-Tubular Oval Head Rivet Zinc Plated - Fastener Type: Semi-Tubular Oval Head Rivet. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Don't see what you need?. Part #: 0000-194547.
- M0.9-M2.5 Copper Brass Eyelet Hollow Tubular Rivets Through Nuts Hole Grommets - Size: M0.9/M1.3/M1.5/M1.7/M2/M2.3/M2.5. Model: Eyelet Hollow Tubular Rivets. Material: Brass.
- M3-M6 Copper Brass Eyelet Hollow Tubular Rivets Through Nuts Hole Grommets - Model: Eyelet Hollow Tubular Rivets. Material: Brass. Size: M3/M3.5/M4/M5/M6.
- 100 Qty #8-32 UNC Rivet Nuts - Zinc Plated Carbon Steel Flat Head Threaded Inser - This one-piece threaded counter-bored tubular rivet can be anchored entirely from one side of the material in which it's installed. Rivet nuts can be installed in many different material types including steel, plastic and fiberglass.
- 100 Qty M3 Rivet Nuts - Zinc Plated Carbon Steel Flat Head Threaded Metric Inser - This one-piece threaded counter-bored tubular rivet can be anchored entirely from one side of the material in which it's installed. Rivet nuts can be installed in many different material types including steel, plastic and fiberglass.
- 10 brass tubular rivets vintage jeans military 3/16 x 3/8 long x 3/8 head 1/2
- 1/8 X 7/32 Semi Tubular Rivet Brass Nickel Oval Head (10 pieces) - Parts are Brass with Nickel Plating.
- M2.5 M3 Copper Brass Vias Rivet Nuts Through Hole Rivets Hollow Grommets - Type: Brass Rivet Nuts. Material: Brass. Asia ( Korea,Japan,Philippines,Malaysia,Singapore). Oceania (Australia,New Zealand).
- M4 M5 M6 Copper Brass Vias Rivet Nuts Through Hole Rivets Hollow Grommets - Type: Brass Rivet Nuts. Material: Brass. Asia ( Korea,Japan,Philippines,Malaysia,Singapore). Oceania (Australia,New Zealand).
- 10 Pk Hillman 20 Piece Copper Steel Assorted Length Tubular Rivets 8007 - Tubular Rivet Copper-steel. Assorted lengths. Head: 5/16 to 9/64. Body: 1/4 to 1/2.
- 6 Pk Hillman 20 Piece Copper Steel Assorted Length Tubular Rivets 8007 - Tubular Rivet Copper-steel. Assorted lengths. Head: 5/16 to 9/64. Body: 1/4 to 1/2.
- 1/4 X 1-3/8” Semi-tubular Rivets Steel 7/16 Oval Head Hollow-end (100 Pieces) - 100 pieces 1/4 X 1-3/8” Semi-tubular Rivets Steel 7/16 Wide Oval Round Head (100 Pieces)7/16 Head 1/4” internal hole depth 1-3/8” Long measured from under the head
- 1/4 X 1-3/8” Semi-tubular Rivets Steel 7/16 Oval Head Hollow-end (50 Pieces) - 50 pieces 1/4 X 1-3/8” Semi-tubular Rivets Steel 7/16 Wide Oval Round Head (50 Pieces)7/16 Head 1/4” internal hole depth 1-3/8” Long measured from under the head
- 1/4 X 1-3/8” Semi-tubular Rivets Steel 7/16 Oval Head Hollow-end (25 Pieces) - 25 pieces 1/4 X 1-3/8” Semi-tubular Rivets Steel 7/16 Wide Oval Round Head (25 Pieces)7/16 Head 1/4” internal hole depth 1-3/8” Long measured from under the head
- Holland Assorted Tubular Rivets - Many available.
- 1/8 X 7/32 Semi Tubular Rivet Brass Nickel Oval Head (100) - 1/8 X 7/32 Semi Tubular Rivet Solid Brass Nickel Oval Head. Parts are Brass with Nickel Plating.
- 1/8 X 7/32 Semi Tubular Rivet Brass Nickel Oval Head (250) - 250 pieces 1/8 X 7/32 Semi Tubular Rivet Brass Nickel Oval Head 7/32 long measured from under the head The head is 7/32 wide Made in USAParts are Brass with Nickel Plating
- 1/8 X 7/32 Semi Tubular Rivet Brass Nickel Oval Head (500) - Parts are Brass with Nickel Plating. 500 pieces.
- OHTR180140, Stainless Steel Oval Head Semi-tubular Rivets - 1/8"X1/4" - 100pcs - Top Quality Stainless Steel Oval Head Semi-tubular Rivets. Material: Stainless Steel. Surface Finish: Clean. Head Dia.: 0.218".
- (1000) 3/16 X 7/16 Semi Tubular Rivet Brass Brake Lining .187 x .437 (3/8" Head) - 3/16 X 7/16 Semi Tubular Rivet Brass Brake Lining rivets.
- HILLMAN Assorted Tubular Rivets - Assorted lengths. Head: 5/16 to 9/64. Body: 1/4 to 1/2. SKU# 740390.
- M3 Brass Tubular Rivets Vias Rivet Nuts Through Hole Rivets Hollow Grommets - Tubular Rivets.
- Chicago R4012x1/4 Semi-Tubular Rivet 1/8 x 1/4 Aluminum Lot of Lot of 100 #4564 - Chicago Rivet. Material Aluminum. Head Type Oval. Lot of 100.
- tubular rivet 20-pack .100 long - AAZF SHANK STYLE TUBULAR. AASK HEAD STYLE FLUSH (FLAT) COUNTERSUNK (INCLUDED ANGLE - LESS THAN 135 DEG W OR W/O CHAMFER).
- (200) 3/16 X 7/16" Semi Tubular Rivet BRASS Brake Lining Flat 3/8 Head 3/16X7/16 - 3/16 X 7/16 Semi Tubular Rivet Brass Brake Lining rivets. 200 pieces.
- OHTR180516, Steel Zinc Oval Head Semi-tubular Rivets - 1/8"X5/16" - 100pcs - Top Quality Steel Oval Head Semi-tubular Rivets. Surface Finish: Zinc Plated. Head Dia.: 0.218". Material: Steel.
- OHTR332332, Stainless Steel Oval Head Semi-tubular Rivets - 3/32"X3/32" - 100pcs - Top Quality Stainless Steel Oval Head Semi-tubular Rivets. Material: Stainless Steel. Surface Finish: Clean. Head Dia.: 0.147".
- OHTR116316, Stainless Steel Oval Head Semi-tubular Rivets - 1/16"X3/16" - 100pcs - Top Quality Stainless Steel Oval Head Semi-tubular Rivets. Material: Stainless Steel. Surface Finish: Clean. Head Dia.: 0.109".
- OHTR116532, Stainless Steel Oval Head Semi-tubular Rivets - 1/16"X5/32" - 100pcs - Top Quality Stainless Steel Oval Head Semi-tubular Rivets. Material: Stainless Steel. Surface Finish: Clean. Head Dia.: 0.109".
- OHTR116180, Stainless Steel Oval Head Semi-tubular Rivets - 1/16"X1/8" - 100pcs - Top Quality Stainless Steel Oval Head Semi-tubular Rivets. Material: Stainless Steel. Surface Finish: Clean. Head Dia.: 0.109".
- OHTR116332,Stainless Steel Oval Head Semi-tubular Rivets - 1/16"X3/32" - 100pcs - Top Quality Stainless Steel Oval Head Semi-tubular Rivets. Material: Stainless Steel. Surface Finish: Clean. Head Dia.: 0.109".