• Fastener Anchors

• Wedge & Sleeve Anchors

  • PicClick
  • └ Business & Industrial
  •     └ Fasteners & Hardware
  •         └ Fastener Anchors
  •             └ Drywall Anchors
  •             └ Lag Shields
  •             └ Spring Anchors
  •             └ Toggle Bolts
  •             └ Wedge & Sleeve Anchors

• 

  9/16" x 5" Wedge Anchors QTY# 8

  $10.00 Buy It Now
  See Details
• 

  3/4"-10 x 8 1/2" wedge anchor

  $3.00 Buy It Now
  See Details
• 

  100, Powers Wedge-Anchors 3/8"x5"

  $125.00 Buy It Now
  See Details
• 

  95, Powers Wedge-Anchor 1/2"x 3"

  $150.00 Buy It Now
  See Details
• 

  (50-Pk) Hillman Wedge Anchor Zinc 3/8" X 2-1/4" 371926

  $47.95 $38.36 Buy It Now or Best Offer
  See Details
• 

  DeWalt Drop-In Anchor Zinc 3/8"-16 Thread Size, 1/2" Diameter 6306SD-PWR

  $4.95 $3.96 Buy It Now or Best Offer
  See Details
• 

  12" X 7" Concrete Anchor Stainless Steel Heavy Duty Wedge Anchor for...

  $23.83 Buy It Now
  See Details
• 

  TRUBOLT - RED HEAD 1/2" x 4-1/4" CONCRETE EXPANDING WEDGE STUD BOLT ANCHOR 21

  $29.95 Buy It Now or Best Offer
  See Details
• 

  TRUBOLT - RED HEAD 3/8" x 3-3/4" CONCRETE EXPANDING WEDGE STUD BOLT ANCHOR 50

  $39.95 Buy It Now or Best Offer
  See Details
• 

  4 pcs) MKT FASTENING M16310301 Siesmic Wedge Anchor Stud Steel, 18mm Dia, 122mm

  $52.00 Buy It Now or Best Offer
  See Details
• 

  5/8" x 6” 304 Stainless Steel Hex Sleeve Anchor (10 per Box)

  $60.00 0 Bids or Buy It Now 2d 23h
  See Details
• 

  5/8" x 4-1/4" 304 Stainless Steel Hex Sleeve Anchor (10 per Box)

  $60.00 0 Bids or Buy It Now 23h 36m
  See Details
• 

  Drop-In Anchor Zinc Plated 5/8"-11 Anchor Thread Size x 7/8" Anchor Dia.

  $4.95 $3.96 Buy It Now or Best Offer
  See Details
• 

  19 5/8 x 6 DFS Concrete Wedge Anchors Hammer Drive Pin Anchor Bolts

  $40.00 Buy It Now
  See Details
• 

  Zoro Select U70411.062.0500 Wedge Anchor,5/8",5",Zp Carbon Stl,Pk2

  $3.63 Buy It Now
  See Details
• 

  Hillman Power Stud 3/4 In. x 5-1/2 In. Zinc-Plated Wedge Anchor (10 Ct.) 371958

  $40.99 $39.99 Buy It Now
  See Details
• 

  concrete bent anchor bolts 3/4 x 30" ( Lot of 4)

  $80.00 Buy It Now
  See Details
• 

  Hilti 336426 HDI 3/8" Drop-In Threaded Concrete Anchors Box of 50 NEW

  $34.69 Buy It Now
  See Details
• 

  Powers Fasteners Power-Stud5/8" x 4-1/2" Wedge Anchor, Case of 25

  $150.00 $79.99 Buy It Now or Best Offer
  See Details
• 

  Powers/DeWalt 1/2" X 2-3/4 " Power-Stud Carbon Steel Wedge Expansion Anchor

  $39.99 Buy It Now
  See Details
• 

  Dewalt 7420SD1 Power-Stud Carbon Wedge Expansion Anchor (100 Pack)

  $59.99 Buy It Now
  See Details
• 

  Wej-It 1/4" X 1 3/4" Ankr-Tite Wedge Anchor Bolt AT1413 (100/Pkg.)

  $24.99 Buy It Now
  See Details
• 

  Car Roof Car Foot Assist Pedal

  $22.00 Buy It Now
  See Details
• 

  Aerosmith Carbon Steel Wedge Anchor Zinc 5/8″ X 5″ WAG58500 Box Of 25

  $29.99 Buy It Now
  See Details
• 

  Cobra Anchors Galvanized Parawedge Concrete Anchor 1x 1-1/2" x 5-1/2" 503NSG

  $5.00 Buy It Now or Best Offer
  See Details
• 

  (QTY 100) Tie Wire Anchor 1/4" x 2" Closed Eye Expansion Bolts Masonry Eye Hook

  $32.85 Buy It Now
  See Details
• 

  100 Pieces 1/4"-20 X 3 1/4" Wedge Anchors, 316 Stainless Steel

  $85.00 Buy It Now
  See Details
• 

  (100) Mushroom Hd 1/4 x 1-1/4 Hammer Dr Pin Anchors Nail-In Hammer-In Rivet; g3

  $24.95 Buy It Now
  See Details
• 

  Simpson Strong-Tie S11A125RNB 1-1/4" x .120 304SS Ring Shank Roofing Nails...

  $328.37 Buy It Now
  See Details
• 

  3006.6527 BoatTector Vinyl-Coated Navy Anchor - 20 lbs.

  $43.00 Buy It Now
  See Details
• 

  Sleeve Anchor 1/4 In. x 3 1/8 In. Flat Head Drill Size 1/4 Inch Zinc, 100 Pieces

  $56.99 Buy It Now
  See Details
• 

  Box of 10 Fastenal Wedge Expansion Anchors 3/4" x 6-1/4" C51A

  $32.95 Buy It Now or Best Offer
  See Details
• 

  Mkt Fastening 273823S Wedge Anchor,316 Ss,3/8X2 3/4,Pk20

  $83.99 Buy It Now
  See Details
• 

  1 watcher

  Redhead 12029 Wedge Anchor 1/2" X 7" Concrete Hot-Dipped Galvanized read!!

  $25.00 Buy It Now
  See Details
• 

  Dewalt Wedge Anchors And Nuts Diameter: 3/4" Tc: 10 *** Lot Of 20 ***

  $40.00 Buy It Now
  See Details
• 

  Dewalt Wedge Anchors And Nuts Diameter: 5/8" Tc: 11-1/2 *** Lot Of 52 ***

  $40.00 Buy It Now
  See Details
• 

  Red Head SS Expansion Wedge Anchor 3-3/4" x 1/2" Anchor Dia SWW-1236

  $256.95 $64.24 Buy It Now or Best Offer
  See Details
• 

  (25-Pk) Brighton-Best Ultrawedge Wedge Anchor Stainless Steel 5/8" x 4-1/2"

  $348.25 $87.06 Buy It Now or Best Offer
  See Details
• 

  Red Head WS-3822 Trubolt Carbon Steel Wedge 3/8" by 2-1/4" Anchor (50 per box)

  $29.99 Buy It Now
  See Details
• 

  Red Head LDT-3816 Large Diameter Tapcon 3/8-Inch by 1-3/4-Inch Anchor 50 per Box

  $67.01 Buy It Now
  See Details
• 

  Carbon Steel 1/2"X5.5" Wedge Anchors

  $48.00 0 Bids or Buy It Now 6d 11h
  See Details
• 

  Hilti HSL-3 M16/10

  $32.00 0 Bids or Best Offer 6d 10h
  See Details
• 

  Hilti KB-TZ2 1/2-3” Qty 11

  $15.00 0 Bids or Best Offer 6d 9h
  See Details
• 

  Red Head 3/8 in. x 3-3/4 in. Wedge Anchor 15CT

  $29.15 Buy It Now
  See Details
• 

  TACO Marine V12-4155BKA50-1 Flexible Rub Rail Vinyl Insert - 3/4" X 3/8"

  $157.99 Buy It Now
  See Details
• 

  New Hilti 5/8"x 4 3/4" KB-TZ2 Wedge Anchors #2210271 90 PCS, 6 Boxes of 15 PCS

  $300.00 Buy It Now or Best Offer
  See Details
• 

  Concrete Anchors 5/8 Star Loxin

  $50.00 Buy It Now
  See Details
• 

  25 Count Box of Concrete Inserts PZI 36

  $9.00 0 Bids or Best Offer 5d 7h
  See Details
• 

  New 100-Pack Metallics 1/4" x 1" Hand Drive Pins Steel Zinc-Plated DP3

  $12.99 $12.34 Buy It Now or Best Offer
  See Details
• 

  Tapcon Concrete Anchor Screw White Phillips Flat Head 1/4 x 3 1/4 Inch 75 Pack

  $50.98 Buy It Now
  See Details
• 

  Powers 7436SD2 Power Stud Wedge Expansion Anchor 7 in, 5/8 in Thread, 25 Pack

  $99.99 $64.99 Buy It Now or Best Offer
  See Details
• 

  1 watcher

  Pack of 50 Dewalt 7413SD1 Concrete Wedge Anchor SDI 3/8 x 3-Inch

  $24.99 Buy It Now
  See Details
• 

  (10-Pk) Lawson Wej-It Anchors Zinc Plated Steel 1/2" x 3-1/2" 92860

  $24.99 $19.99 Buy It Now or Best Offer
  See Details
• 

  Hillman Power Stud 3/4 In. x 7 In. Zinc-Plated Wedge Anchor (10 Ct.) 371960

  $58.99 $58.15 Buy It Now
  See Details
• 

  RED HEAD 50093 3/8-in x 3-3/4-in Steel Concrete Wedge Anchors Set of 5

  $19.99 Buy It Now or Best Offer
  See Details
• 

  (30) Simpson Strong-Tie 3/8 Drop-In Anchors DIA37P1 + (2) Drop In Setting Tools

  $29.99 Buy It Now
  See Details
• 

  Lot of (10) ATG3461 Wej-It 3/4 x 6-1/4" Ankr-Tite Wedge Anchors w/ Hardware NIB!

  $49.99 Buy It Now or Best Offer
  See Details
• 

  Dewalt 07340-PWR Wedge Anchor, 3/4" Anchor Dia., Stainless Steel, PK 20

  $149.99 Buy It Now
  See Details
• 

  Red Head 3/8 in. x 3-3/4 in. WEDGE ANCHOR 15CT

  $19.17 Buy It Now
  See Details
• 

  TACO Marine V12-4155BKA50-1 Flexible Rub Rail Vinyl Insert - 3/4″ X 3/8″

  $154.99 Buy It Now
  See Details
• 

  Zoro Select B09100.037.0350 Sleeve Anchor,Hex Nut,3/8" Dia.,Pk200

  $76.46 $67.82 Buy It Now
  See Details
• 

  2 watchers

  Wedge Steel 8" x 3/4" 04/19T

  $16.95 $13.56 Buy It Now or Best Offer
  See Details
• 

  Wedge Steel 8" x 3/4" 06/22T

  $14.95 $11.96 Buy It Now or Best Offer
  See Details
• 

  3/8" x 2-1/2" - 20 Pieces Wedge Anchor Zinc Plated Heavy Duty Fastener for Co...

  $26.34 Buy It Now
  See Details
• 

  12 Hilti Kwik Bolt Expansion Anchor 1/2" x 2-3/4" - 282509 w/ 20 washers 13 nuts

  $25.00 0 Bids or Best Offer 4d 13h
  See Details
• 

  (25-Pk) DeWalt Expansion Anchor Stainless Steel 5/8"-11 x 2-1/2" 06230

  $229.95 $183.96 Buy It Now or Best Offer
  See Details
• 

  Red Head Ws-1244 Wedge Anchor,Carb. Steel,1/2X4-1/2,Pk25

  $52.17 Buy It Now
  See Details
• 

  DEWALT Wedge Anchor: Steel, Zinc Plated, 3/4 in Anchor #7449SD1-PWR

  $40.00 Buy It Now or Best Offer
  See Details
• 

  1/4 X 3/4 Hammer Drive (Nail-in) Anchors for masonry - 100 Pak NEW!

  $5.00 Buy It Now
  See Details
• 

  10ct Wej-It AT5850 5/8"x5" Carbon Steel High Performance Wedge Anchors, Silver

  $29.95 Buy It Now or Best Offer
  See Details
• 

  Red Head LDT-5850 Large Diameter Tapcon 5/8-Inch by 5-Inch Anchor 10 per Box

  $69.99 Buy It Now
  See Details
• 

  Red Head LDT-3840 Large Diameter Tapcon 3/8-Inch by 4-Inch Anchor 50 per Box

  $109.92 Buy It Now
  See Details
• 

  Red Head LDT-1230 Large Diameter Tapcon 1/2-Inch by 3-Inch Anchor 25 per Box

  $82.48 Buy It Now
  See Details
• 

  ITW Red Head LDT-3830 Large Diameter Tapcon 3/8-Inch by 3-Inch Anchor 50 per Box

  $99.17 Buy It Now
  See Details
• 

  Red Head LDT-3850 Large Diameter Tapcon 3/8-Inch by 5-Inch Anchor 40 per Box

  $101.65 Buy It Now
  See Details
• 

  Red Head LDT-3824 Large Diameter Tapcon 3/8-Inch by 2-1/2-Inch Anchor 50 per Box

  $94.92 Buy It Now
  See Details
• 

  French Creek Roofing 3/4" Hole Reusable Concrete Anchor Safety

  $18.99 0 Bids or Best Offer 2d 12h
  See Details
• 

  Red Head 3/8 in. x 3-3/4 in. WEDGE ANCHOR 50CT

  $36.03 Buy It Now
  See Details
• 

  Hilti 3/4 X 6 1/4 Kb-Tz2 Kwik Bolt Wedge Anchor Qty 10

  $50.00 Buy It Now
  See Details
• 

  Lot of 50ea. Stainless Steel 3/8"-16 x 2-5/8" OAL Sleeve Anchors -new, open bag

  $27.90 Buy It Now or Best Offer
  See Details
• 

  OPEN BOX 50 PACK - HILTI KB-TZ SS304 Wedge Anchors 3/8 x 3 3/4 #387524

  $280.00 Buy It Now
  See Details
• 

  10 PIECE - HILTI KB-TZ SS304 Wedge Anchors 3/8 x 3 3/4 #387524

  $55.00 Buy It Now
  See Details
• 

  50 PACK - HILTI KB-TZ SS304 Wedge Anchors 3/8 x 3 3/4 #387524

  $295.00 Buy It Now
  See Details
• 

  Industrial Rubber Wedge Black 2 Pack 6.5X6 Inches

  $30.12 Buy It Now
  See Details
• 

  Red Head 3/8 in. x 5 in. WEDGE ANCHOR 15CT

  $21.48 Buy It Now
  See Details
• 

  Mkt Fastening 2738234 Wedge Anchor,303/304 Ss,3/8X2 3/4,Pk20

  $31.00 Buy It Now
  See Details
• 

  DBI.  sala    saflok concrete wedge anchor

  $99.00 Buy It Now or Best Offer
  See Details
• 

  Box of 48 - Red Head Drop In Concrete Anchors 1/2" - 13 Bolt Model RM-12

  $48.00 Buy It Now
  See Details
• 

  Box of 50 - Red Head Drop In Concrete Anchors 1/2" - 13 Bolt Model RM-12

  $50.00 Buy It Now
  See Details
• 

  Extreme Max 3006.6557 BoatTector Vinyl-Coated River Anchor - 18 lbs.

  $78.06 Buy It Now
  See Details
• 

  Lot 58 Powers Power-Stud Wedge Expansion Anchor 5/8" x 5" 3" Thread Zinc Plated

  $199.99 Buy It Now
  See Details
• 

  10 Pack Mkt Fastening 1" Dia x 9. L Wedge Anchor 2519000 *MISSING NUTS WASHERS

  $79.00 Buy It Now or Best Offer
  See Details
• 

  Mkt Fastening 2512700 Wedge Anchor,Gr 5,1/2 X 7 In,Pk25

  $50.48 Buy It Now
  See Details
• 

  Titen THD757000H HD Heavy Duty Screw Anchor Masonary/Concrete 5 Pack 3/4” X 7”

  $25.00 Buy It Now or Best Offer
  See Details
• 

  Red Head Trubolt Carbon Steel Wedge 3/4-Inch by 4-1/4-Inch Anchor, Case of 60

  $249.00 $74.99 Buy It Now or Best Offer
  See Details
• 

  (24-Pk) Hillman Wedge Anchor 1/2" x 3-3/4" 371938

  $58.95 $44.21 Buy It Now or Best Offer
  See Details
• 

  (29-Pk) Powers Fasteners Wedge Anchor 1/2" x 3-3/4" 371938

  $61.95 $46.46 Buy It Now or Best Offer
  See Details
• 

  (50-Pk) Hillman Strike Anchor 5/16" x 2-3/4" 375656

  $80.80 $60.60 Buy It Now or Best Offer
  See Details
• 

  Red Head 3/8 in. x 3-3/4 in. Wedge Anchor 15CT

  $19.99 Buy It Now
  See Details
• 

  Internally Threaded Expansion Anchors 304 Stainless Steel 5/8" 06210

  $9.01 $4.05 Buy It Now or Best Offer
  See Details

• (2-Pk) Drop-In Anchors Zinc Plated Steel 1/2"-13 - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
• Single Eye Rod Anchor 5/8" x 15" - We are not an authorized dealer of this product. This product has no manufacturers warranty.
• (5-Pk) Wedge Expansion Anchor SD1 Carbon Steel Zinc Plated 3/4" x 4-1/4" - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Galvanized Anchor Nut 1"-8 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Galvanized L-Bolt Anchor 1/2"-13 x 12" - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• (10-Pk) Powers Fasteners Concrete Anchors 3/4" Dia. x 3/4" x 2-3/4" OAL - (10-Pk) Powers Fasteners Concrete Anchors 3/4" Dia. x 3/4" x 2-3/4" OAL 05050S-PWR. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Large Diameter Tapcon 3/8-Inch by 4-Inch Anchor 50 per Box Finished Hex Washer - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• ITW Red Head WW-1236 1/2 x 3 -3/4" Trubolt Stainless steal Wedge Anchor 25 New - ITW Red Head WS-1236 3/4" x 8-1/2" Trubolt Carbon Wedge Anchor 25 Per Box. Please let me know if you have any questions or concerns
• Red Head WS-5860 Trubolt Carbon Steel Wedge 5/8-Inch by 6-Inch Anchor 10 per Box - Made of -plated carbon steel--standard anchor for all structural and in-plant uses. Versatile fully threaded design. piece stainless steel expander clip resists corrosion. Complete with nut and washer.
• Nortel Concrete Anchor Kit ( lot of 2 kits) - You will get 2 kits for a total of 8 anchors. Each anchor is 5" long and has a 7/16 nut. Look at photos for condition and description or contact me for questions.
• Ramset SFS-1430 1/4 X 3 1/8 Flat Head Stainless Sleeve Anchor - Ramset SFS-1430 1/4 X 3 1/8 Flat Head Stainless Sleeve Anchor.
• Dewalt Wedge Anchor 3/4" x 5.5" Qty. pack 20 - Wedge Anchor Type. Expansion Wedge Anchor. Anchor Material. Anchor Dia. Anchor Length. Thread Length. Thread Size. Nut and Washer.
• 20 Pack Hilti 273662 HIT-SC 22x50 Composite Mesh Sleeve Masonry Chemical Anchor - Part Number: 273662. Hilti Composite Anchor Sleeves. For use with Hilti HY270, HY170, HY70 MM PLUS, HY10 PLUS, HY 10, HFX.
• (23-Pk) Hillman Wedge Anchor Zinc 0.375" x 5" 371934 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• TACO Marine V12-4155BKA50-1 Flexible Rub Rail Vinyl Insert - 3/4″ X 3/8″ - TACO Marine's V12-4155BKA50-1 Flexible Rub Rail Vinyl Insert is sold in 50' lengths. It is designed for use with flexible rub rails. Its soft PVC insert provides a cushion effect to absorb impact. for use with flexible rub rail.
• (5-Pk) Stud Anchor For Wet Concrete 3/4" x 3-3/16" 90578A561
• Simpson Strong-Tie Strong-Bolt Wedge Anchor 50PK 3/8" x 3-3/4" Concrete/Masonry - Simpson Strong-Tie Strong-Bolt Wedge Anchor 50PK 3/8" x 3-3/4" Concrete/Masonry.
• Hillman Wedge Anchor 5/8 " X 6 " Zinc Plated Steel - RAWL POWER STUD WEDGE ANCHOR 10 Pack, 5/8 x 6, Power Stud Wedge Anchor, Carbon Steel/Zinc, Thread Length 4-3/8, Minimum Embedment 2-3/4, Ultimate Tension 4,000 PSI Concrete 8,365 LB, Ultimate Shear 4,000 PSI 11,895 LB. Features:- Size: 5/8 x 6 Finish: Carbon Steel/Zinc Drill Size: 5/8 Min. Embedment: 2-3/4 Thread Length: 4-3/8 Base Material: Concrete Ultimate Tension (4,000 PSI Concrete): 8,365 Lbs. Ultimate Shear (4,000 PSI Concrete): 11,895 Lbs. ICC-ES Report #ESR-2818 COLA Report #LARR-25787 UL Listed - File #EX1289 Factory mutual approved Various DOT Approvals - Including CalTrans listing for Stud Mechanical Expansion Anchors Federal GSA Specification - Meets the proof load requirements of FF-S-325C, Group II, Type 4, Class 1 (superseded) and CID A-A 1923A, Type 4 10 per pack.
• Hillman Wedge Anchor 5/8 " X 6 " Zinc Plated Steel - Sold as 2 UNITS at $22.01 per unit. (1 unit = Bx/10.) Bit size = rawl stud dia. Min imbed- 1/4"=1-1/8", 3/8" =1-3/4", 1/2"= 2-14", 5/8"= 2-7/8",3/4" = 3-3/8". Zinc plated steel. Boxed. 5/8" x 6". Manufacturer number: 371950. SKU #: 5305248. Country of origin: Taiwan. Distributed by Hillman Group Rsc.
• The Hillman Group 371932 Wedge Anchor, 3/8 X 3-3/4-Inch, 50-Pack - The Power-Stud is a torque controlled, wedge expansion anchor that is designed for concrete applications. Has various DOT approvals including Cal Trans listing for "Stud Mechanical Expansion Anchors". It is building code approved and can also be used with treated lumber.
• The Hillman Group 371928 Wedge Anchor, 3/8 X 2-3/4-Inch, 50-Pack - The Power-Stud is a torque controlled, wedge expansion anchor that is designed for concrete applications. Has various DOT approvals including Cal Trans listing for "Stud Mechanical Expansion Anchors". It is building code approved and can also be used with treated lumber.
• The Hillman Group 371947 Wedge Anchor, 5/8 X 4-1/2-Inch, 10-Pack - Power fasteners power stud anchor. Steel/zinc-plated. For use in concrete, stone, brick, and Block. Ideal for medium to heavy-duty loads. Drill hole same diameter as anchor. Exact hole depth is not required.
• The Hillman Group 371940 Wedge Anchor, 1/2 X 4-1/2-Inch, 25-Pack - The Power-Stud is a torque controlled, wedge expansion anchor that is designed for concrete applications. Has various DOT approvals including Cal Trans listing for "Stud Mechanical Expansion Anchors". It is building code approved and can also be used with treated lumber.
• Red Head LDT-3840 Large Diameter Tapcon 3/8-Inch by 4-Inch Anchor 50 per Box - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• HILTI 2018455 HIT-Z-R 1/2 X 6-1/2, 316 SS, X30 anchor BOLTS only - HILTI 2018455 HIT-Z-R 1/2 X 6-1/2, 316 SS, X30 anchor BOLTS only. No nut or washer included. Comes just as pictured. If you have any questions please feel free to contact me. I usually ship the day after payment clears. Thanks for looking!
• Zoro Select B70420.050.0550 Wedge Anchor,Ss,303 And 304,Plain,Pk75 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 5 1/2 in, Max. Work Thickness 2 in, Thread Length 3 3/4 in, Thread Size 1/2 In.-13, Min.
• Zoro Select B09100.037.0300 Sleeve Anchor,Hex Nut,3/8" Dia.,Pk225 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 3/8 in, Anchor Length 3 in, Thread Size 5/16, Min. ZORO SELECT. Zoro Select U39797.025.0400 Clevis Pin,Steel,1/4 In. General Purpose.
• Zoro Select B09150.050.0225 Sleeve Anchor,Hex Nut,1/2" Dia.,Pk180 - Sleeve Anchor, Stainless Steel, Material Grade 304, Anchor Dia. 1/2 in, Anchor Length 2 1/4 in, Thread Size 3/8, Min. ZORO SELECT. Zoro Select 36Fl15 Cube Truck,7/16 Cu. Yd.,600 Lb. General Purpose.
• 3 Pack Double Shield Expansion Anchors 5/8" bolt 1" drill 09530-PWR - This achor expands fully, has high gripping power, and is idealwhere there are shear loads or where the bolt is subject to side pressure or vibration. p/n 09530-PWR.
• ⚡️(QTY 100) Dewalt Rod Hanger 50378-PWR .300 Head Pin X 1 1/4” W/90 CC Post Nut - New in box!
• Hillman Power Stud 5/8 In. x 6 In. Zinc-Plated Wedge Anchor (10 Ct.) 371950 - Power Fasteners Power Stud anchor . Steel/zinc-plated. For use in concrete, stone, brick, and block. for medium to heavy-duty loads. Drill hole same diameter as anchor. Exact hole depth is not required. Diameter: 5/8 In. .Length: 6 In. .Finish: Zinc .Minimum Embedment: 2-3/4 In. .Material: Steel .Size: .Color: Silver .Screws Included: .
• Hillman Power Stud 1/2 In. x 5-1/2 In. Zinc-Plated Wedge Anchor (25 Ct.) 371942 - Power Fasteners Power Stud anchor . Steel/zinc-plated. For use in concrete, stone, brick, and block. for medium to heavy-duty loads. Drill hole same diameter as anchor. Exact hole depth is not required. Diameter: 1/2 In. .Length: 5-1/2 In. .Finish: Zinc .Minimum Embedment: 2-1/4 In. .Material: Steel .Size: .Color: Silver .Screws Included: .
• PACK OF 10 MKT FASTENING 2812414 WEDGE ANCHOR, GALV. STEEL, 1/2" x 4-1/4", S0363
• Glarks 6Pcs 3/4" x 7" Wedge Anchors Zinc Plated Heavy Duty Fastener for Concrete - √ Great for use in CONCRETE only, and should never be used in block or brick base material. ※The color may exist slight difference due to different screen display. ➤[Suitable Occasion]: The concrete anchor is for heavy duty fastening applications where high pull out values in concrete are needed.
• Glarks 6Pcs 3/4" x 6-1/4" Wedge Anchors Zinc Plated Heavy Duty Fastener for C... - √ Great for use in CONCRETE only, and should never be used in block or brick base material. ※The color may exist slight difference due to different screen display. ➤[Wide Applications]: Wedge anchors are great to have around for when you need them most!
• Wej-IT 5/8 x 5" Ankr-TITE Wedge Anchors - Zinc Plated - 10/BX - Wej-It 5/8 x 5" ankr-tite wedge anchors, Zinc plated carbon steel with steel clip, 10 per box. We are always working hard for maintain high standards of excellence and resolve your problem in best way.
• Wej-IT 5/8 x 4-1/4" Ankr-TITE Wedge Anchors - Zinc Plated - 10/BX - Wej-It 5/8 x 4-1/4" ankr-tite wedge anchors, Zinc plated carbon steel with steel clip, 10 per box. We are always working hard for maintain high standards of excellence and resolve your problem in best way.
• Red Head 3/8 in. x 3-3/4 in. Wedge Anchor 15CT - Red Head 3/8 in. Wedge Anchor 15CT. Red Head Wedge anchors are heavy-duty anchors designed for fastening into solid concrete. Steel construction with zinc plating for added durability. Fully threaded design accommodates various fixture thicknesses.
• Wej-it FSAX1420 304SS Flat Head SLEEVE-TITE Sleeve Anchors 1/4" x 2" 100ct - Wej-it FSAX1420 304SS Stainless Steel Flat Head SLEEVE-TITE Sleeve Anchors 1/4" x 2" 100ct. The SLEEVE-TITE sleeve anchor is a high-strength pre-assembled expansion anchor designed for anchoring into concrete, masonry, and brick.
• 2 Simpson Heavy Duty Stud Shoe HSS2-3-SDS3 - 2 Simpson Heavy Duty Stud Shoe HSS2-3-SDS3. See pictures
• Cobra 1/2 in. x 7 in. Parawedge Anchor, 25 Pack Box - The Parawedge anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at one end, and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360° one-piece clip that functions as a two-piece clip for more contact, a torque controlled expansion, and can be installed into a bottomless hole.
• 1/2'' x 4-1/2'' 50 PCs Wedge Concrete Wall Anchors Bolt Zinc Plated Heavy Dut... - 1/2" x 4-1/2" 50 PCs Wedge Concrete Wall Anchors Bolt Zinc Plated Heavy Duty Fastener for Concrete (1/2" x 4-1/2", 50). Wedge Anchor. Material: Made of carbon steel & zinc plated surface for corrosion resistant.
• (50PK) DEWALT Wedge Anchor 07313-PWR, SS, 3/8 in Anchor Dia., 3 in (G) - Wedge Anchor Type. Expansion Wedge Anchor. Anchor Dia. Anchor Material. Anchor Length. Work Thickness. ASTM E488; GSA: CID-A-A-1923A Type 4; UL and FM Approved. Agency Compliance.
• Wejit Concrete Wedge Anchor XBG1010 1 X 10 25.4mm X 254mm - Wejit Concrete Wedge Anchor XBG1010 1 X 10 25.4mm X 254mm.
• Hilti HSL 4 Heavy Duty Wedge Anchor Bolt M10 15x109 20 - Hilti Hsl 4 Heavy Duty Wedge Anchors 20 count. Hilti Kwik Bolt TZ2 CS Wedge Stud Anchor 5/8"x6" 15/Anchors Bx. Heavy-duty fastenings in high safety-relevant or dynamic applications, including applications in nuclear power plants.
• Red Head 3/8 in. x 3-3/4 in. Wedge Anchor 15CT - Red Head 3/8 in. Wedge Anchor 15CT. Red Head Wedge anchors are heavy-duty anchors designed for fastening into solid concrete. Steel construction with zinc plating for added durability. Fully threaded design accommodates various fixture thicknesses.
• SP12-38 Asphalt Anchor 6 Pack - SP12-38 Asphalt Anchor 6 Pack.
• Red Head LDT-3840 Large Diameter Tapcon 3/8-Inch by 4-Inch Anchor (50 per Box) - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• Red Head LDT-3840 Large Diameter Tapcon 3/8-Inch by 4-Inch Anchor (50 per Box) - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• Red Head LDT-3840 Large Diameter Tapcon 3/8-Inch by 4-Inch Anchor (50 per Box) - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• J-Hook Anchor Bolts Concrete Bent 0.37" X 12" LOT OF 4
• Red Head LDT-3840 Large Diameter Tapcon 3/8-Inch by 4-Inch Anchor (50 per Box) - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• Concrete Bent Anchor Bolts 0.48" x 16 " Hot Galvanized LOT OF 6
• Concrete Bent Anchor Bolts 0.61" x 18 " LOT OF 6
• Concrete Bent Anchor Bolts 0.74" x 18 " Hot Galvanized LOT OF 4
• Concrete Bent Anchor Bolts 0.74" x 18 " Hot Galvanized LOT OF 6
• Glarks 6Pcs 3/4" x 6" Wedge Anchors Zinc Plated Heavy Duty Fastener for Concrete - √ Great for use in CONCRETE only, and should never be used in block or brick base material. ※The color may exist slight difference due to different screen display. ➤[Suitable Occasion]: The concrete anchor is for heavy duty fastening applications where high pull out values in concrete are needed.
• Glarks 12Pcs 1/2" x 5-1/2" Wedge Anchors Zinc Plated Heavy Duty Fastener for ... - √ Great for use in CONCRETE only, and should never be used in block or brick base material. ※The color may exist slight difference due to different screen display. ➤[Wide Applications]: Wedge anchors are great to have around for when you need them most!
• Glarks 20Pcs 5/16" x 3-1/2" Wedge Anchors Zinc Plated Heavy Duty Fastener for... - √ Great for use in CONCRETE only, and should never be used in block or brick base material. ※The color may exist slight difference due to different screen display. ➤ [Wide Applications]: Wedge anchors are great to have around for when you need them most!
• Glarks 20Pcs 3/8" x 3" Wedge Anchors Zinc Plated Heavy Duty Fastener for Conc... - √ Great for use in CONCRETE only, and should never be used in block or brick base material. ※The color may exist slight difference due to different screen display. ➤ [Wide Applications]: Wedge anchors are great to have around for when you need them most!
• Wedge Anchors 304 Stainless Steel Concrete Expansion Anchors - 3/8"- 3.3/4 X16 - New anchors as pictured,,,16 of them
• The Hillman Group 371958 Wedge Anchor, 3/4 X 5-1/2-Inch, 10-Pack , Zinc
• 1/2 " concrete wedge anchors Stainless Steel - 1/2 " concrete wedge anchors Stainless Steel. 4 Anchors included
• Wedge Anchor WA1210 Concrete Fastner 1/2" x 10" Confast  - Wedge Anchor WA1210 Concrete Fastner 1/2" x 10" Confast.
• MKT Fastening 2112412 Seismic Wedge Anchor 1/2 X 4-1/2 Pack Of 10 - MKT Fastening 2112412 Seismic Wedge Anchor, 1/2 X 4-1/2, Pack Of 10.
• Red Head LDT-3840 Large Diameter Tapcon 3/8-Inch by 4-Inch Anchor 50 per Box - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• Red Head LDT-3840 Large Diameter Tapcon 3/8-Inch by 4-Inch Anchor 50 per Box - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• Red Head LDT-3840 Large Diameter Tapcon 3/8-Inch by 4-Inch Anchor 50 per Box - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• Steel Concrete Wedge Anchors 1/2" x 5-1/2" - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• WEJ-IT 3/4" x 4 1/4" CONCRETE WEDGE ANCHOR BOLTS AT3441 carbon steel ANKR-TITE - Full box of 10 WEJ-IT 3/4" x 4 1/4" CONCRETE WEDGE ANCHOR BOLTS AT3441 carbon steel ANKR-TITE. These anchors retail for $10 each save yourself a bundle buy a box of 10!👍🏻
• Red Head LDT-3840 Large Diameter Tapcon 3/8-Inch by 4-Inch Anchor 50 per Box - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• Hilti HSL-3-G Wedge Expansion Anchor Size M20/30 - Includes 1 Anchor. Unused anchor.
• Hilti Kh- 3/8" ×4"Concrete Screw Anchors 50 Piece - Hilti Kh- 3/8" ×4"Concrete Screw Anchors 50 Piece.
• Hilti Kb-tz 5/8" × 4- 3/4" Concrete Anchors 18 Piece - Hilti Kb-tz 5/8" × 4- 3/4" Concrete Anchors 18 Piece. The Box comes with 15 pieces normally but I threw three extra ones inside for a total of 18 anchors
• 33 pcs Long 5/16" Lag Bolt Shields 5/16 x 1-3/4 Concrete Anchors 1/2" Drill - Drill a 1/2" O.D. hole about 2" deep in a concrete or masonry surface and insert this sleeve. Then, you can thread a standard 5/16" x 2" lag screw into the sleeve for a secure friction grip in the concrete.
• Zoro Select U70411.100.1200 Wedge Anchor,1",12",Zp Carbon Stl, - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1 in, Anchor Length 12 in, Max. Work Thickness 4 in, Thread Length 3 7/8 in, Thread Size 1 In.-8, Min.
• ITW Red Head TRUBOLT Wedge Anchor Stainless Steel 1/4 x 2 1/4" WW-1422 - Red Head® - Concrete Anchor - 1/4in. dia, 1/4in. Drill, 2-1/4in. Oal, 2-1/2in. • Wedge Anchor Type- Expansion Wedge Anchor. Item- Wedge Anchor. Features:• 1/4 x 2-1/4in. 304 Stainless Steel Wedge Anchor.
• Zoro Select B70420.100.0600 Wedge Anchor,Ss,303 And 304,Plain,Pk15 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 1 in, Anchor Length 6 in, Max. Work Thickness 1 in, Thread Length 2 7/8 in, Thread Size 1 In.-8, Min.
• /2 in. x 3-3/4 in. Wedge Anchor (25-Pack) - The Parawedge anchor stud is cold formed and consists of a threaded section with standard coarse bolt threads at 1 end and a parabolic mandrel at the opposite end for a smoother expansion. It has a 360° 1-piece clip that functions as a 2-piece clip for more contact, a torque controlled expansion and can be installed into a bottomless hole. 3 head styles are available: Hex Nut, Wire Hanger and Tie Down Hook. More than 39 sizes are available, in 2 types of material: Carbon steel and 304 Stainless steel.
• Red Head Sww-5850 Wedge Anchor,316 Ss,5/8X5,Pk10 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 5/8 in, Anchor Length 5 in, Max. Work Thickness 1 5/8 in, Thread Length 3 1/4 in, Thread Size 5/8 In.-11, Min.
• Red Head 3/8 in. x 3-3/4 in. Wedge Anchor 15CT - Red Head 3/8 in. Wedge Anchor 15CT. Steel construction with zinc plating for added durability.
• Red Head 1/2 in. x 7 in. HOT Dipped Galvanized Wedge Anchor 10CT - Red Head 1/2 in. HOT Dipped Galvanized Wedge Anchor 10CT. Steel construction with zinc plating for added durability.
• 1/2" x 5" Sleeve Anchor | Hot Dip Galvanized | Hex Head | 20pcs per Box - Hot Dip Galvanized Finish, Hex Head Type. 20 pcs per Box.
• Simpson Titan HD Heavy Duty Screw Anchor 3/4"×5"# Thd75500h (5 pcs) - Simpson Titan HD Heavy Duty Screw Anchor 3/4"×5"# Thd75500h (5 pcs).
• Hilti Carbon Steel Zinc Plated Concrete Wedge Anchor Kb-tz 5/8" × 4 - 3/4" - Hilti Carbon Steel Zinc Plated Concrete Wedge Anchor Kb-tz 5/8" × 4 - 3/4".
• Simpson Wedge All Wedge Anchor 1/2"×7" #Wa50700 (25 Pack) - Simpson Wedge All Wedge Anchor 1/2"×7" #Wa50700 (25 Pack).
• New 100-Pack Metallics 1/4" x 2" Hand Drive Pins Steel Zinc Plated JDP6 - 1/4" head, 2" long. Fruit Ridge Tools, LLC.
• New 99-Pack Rawl Fastening Threaded Stud 1/4"-20 x 1-3/4" Hammer Drive Pins 1524 - For concrete and block. Features include Fruit Ridge Tools, LLC. Should not be used overhead.
• Hillman Wedge Anchor Zinc 1/2" x 5-1/2" 371942 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Red Head LDT-5860 Large Diameter Tapcon 5/8-Inch by 6-Inch Anchor (10 per Box) - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• Red Head 3/8 in. x 3-3/4 in. Wedge Anchor 15CT - Wedge Anchor 15CT. Red Head Wedge anchors are heavy-duty anchors designed for fastening into solid concrete. Steel construction with zinc plating for added durability. We take our reputation seriously.
• Dewalt #06210 Expansion Anchor Plain 304 S.S. 5/8"×2-1/2" 25 Pack - Dewalt #06210 Expansion Anchor Plain 304 S.S. 5/8"×2-1/2" 25 Pack New Open box free shipping
• Red Head 1/2 in. x 5-1/2 in. Wedge Anchor 10CT - Wedge Anchor 10CT. Red Head Wedge anchors are heavy-duty anchors designed for fastening into solid concrete. Steel construction with zinc plating for added durability. We take our reputation seriously.
• Hillman Power Stud 5/8 In. x 6 In. Zinc-Plated Wedge Anchor (10 Ct.) 371950 Pack - Power Fasteners Power Stud anchor . Steel/zinc-plated. For use in concrete, stone, brick, and block. for medium to heavy-duty loads. Drill hole same diameter as anchor. Exact hole depth is not required. Diameter: 5/8 In. .Length: 6 In. .Finish: Zinc .Minimum Embedment: 2-3/4 In. .Material: Steel .Size: .Color: .Screws Included: .Maximum Weight (Drywall): .Maximum Weight (Concrete): .Head Type: . pack of 4.
• One 5/8" x 6" Hex Nut Expansion Heavy Duty Concrete Wedge Anchor
• Red Head LDT-3840 Large Diameter Tapcon 3/8-Inch by 4-Inch Anchor 50 per Box - The anchor bodies are made of hardened carbon steel and plated, 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• QTY=15:ANCHOR 1/2"-13x5 1/2" WEDGE+ ANCHOR STEEL ZINC CR+3 - QTY=15:ANCHOR 1/2"-13x5 1/2" WEDGE+ ANCHOR STEEL ZINC CR+3.
• Simpson Strong Tie Strong Bolt 2 STB2-62500 Wedge Anchors 5/8” X 5” Anchor 20pc
• Tapcon Concrete Anchor Screw White Phillips Flat Head 1/4 x 3 1/4 Inch 75 Pack - Tapcon Concrete screw anchors draw from its unique ability to TAP its threads into Concrete, making it an excellent alternative to expansion anchors, plugs and lag shields. To install, use a 3/16 in.
• Hillman Heavy duty Concrete Anchor Bolts 6”, 4”, 3”, 2”, 1/2”,3/8” LOT of 100 - New - Hillman Heavy duty Concrete Anchor Bolts Lot contains over 100 various size anchor bolts6”x1/2” - 12 bolts 4”x1/2” - 12 bolts 3”x1/2” - roughly 50 bolts2”x3/8” - roughly 30 bolts 3”x3/8” - roughly 20 bolts See all photos for pictures of each bag of bolts separated by size! I did a quick count of each bag during photographs and listed above ! I did not have the original storage trays for the 3/8” bolts to show them in photos … as you see I only show photos of the 3 different 1/2” bolt storage / retail tray stickers. Buy now price includes everything shown in photos / listed in description!
• (4 anchors) 1/2-13 x 5-1/2" Concrete Wedge Anchor Bolts Hot Dipped Galvanized - (4 anchors) 1/2-13 x 5-1/2" Concrete Wedge Anchor Bolts Hot Dipped Galvanized.
• 3/8" x 4" (10pc Lot) Flat Head Sleeve Anchors Zinc Plated Steel Factory New - Sleeve Anchor (10pc LOT). Factory New.
• 3/8" x 4" (4pc Lot) Flat Head Sleeve Anchors Zinc Plated Steel Factory New - Sleeve Anchor (4pc LOT). Factory New.
• Kwik Bolt 3/4 X 10in Concrete Anchor Qty 4 New Without Package - Kwik Bolt 3/4 X 10in Concrete Anchor Qty 4 New Without Package.
• 50 Dewalt 3/8 In. X 3-3/4 In. Power-Stud+Stainless Steel Wedge Expansion Anchor - 50 Dewalt 3/8 In. X 3-3/4 In. Power-Stud+Stainless Steel Wedge Expansion Anchor.
• Brass plated mending brackets, 2 in., by Brainerd, pack of 4 unopened - Brass plated mending brackets, 2 in., by Brainerd, pack of 4 unopened.
• 50pc DEWALT Wedge Anchor 1/2 in X 3 3/4 in Lg, Stainless Steel 304, 07322-PWR - 50pc DEWALT Wedge Anchor 1/2 in X 3 3/4 in Lg, Stainless Steel 304, 07322-PWR.
• 3/8x3 Red Head Sleeve Anchors 3/8x3 Concrete Anchor 3/8 x 3 - Red Head Sleeve Anchors. It is a lot easier to resolve problems one on one. We will do our best to work out any issues there may be. Material: Steel. Finish:Yellow Zinc Plating. NOT previously rejected for quality issues or rescued from a scrap yard.
• 1/2x6 Red Head Sleeve Anchors 1/2x6 Concrete Anchor 1/2 x 6 - Red Head Sleeve Anchors. It is a lot easier to resolve problems one on one. We will do our best to work out any issues there may be. Material: Steel. Finish:Yellow Zinc Plating. NOT previously rejected for quality issues or rescued from a scrap yard.
• 3/4x5-1/2 Red Head Wedge Anchors 3/4x10x5-1/2 Concrete Anchor 3/4-10 x 5.5 - Red Head Wedge Anchors. Thread:10 (Coarse Thread). Nut Wrench Size:1-1/8. It is a lot easier to resolve problems one on one. We will do our best to work out any issues there may be. Material: Steel.
• 5/8x5 Red Head Wedge Anchors 5/8x11x5 Stainless Concrete Anchor 5/8-11 x 5 - Red Head Wedge Anchors. Thread:11 (Coarse Thread). Nut Wrench Size:3/4. Material: Stainless Steel. Finish:Stainless Steel. It is a lot easier to resolve problems one on one. We will do our best to work out any issues there may be.
• 5/8x5 Red Head Wedge Anchors 5/8x11x5 Concrete Anchor 5/8-11 x 5 - Red Head Wedge Anchors. Thread:11 (Coarse Thread). Nut Wrench Size:3/4. It is a lot easier to resolve problems one on one. We will do our best to work out any issues there may be. Material: Steel. NOT previously rejected for quality issues or rescued from a scrap yard.
• 1/2x4-1/4 Red Head Wedge Concrete Anchors 1/2x13x4-1/4 Stainless 1/2-13 x 4-1/4 - Red Head Wedge Anchors. Thread:13 (Coarse Thread). Nut Wrench Size:3/4. Material: Stainless Steel. Finish:Stainless Steel. It is a lot easier to resolve problems one on one. We will do our best to work out any issues there may be.
• 1/2x4-1/4 Red Head Wedge Anchors 1/2x13x4-1/4 Concrete Anchor 1/2-13 x 4.25 - Red Head Wedge Anchors. Thread:13 (Coarse Thread). Nut Wrench Size:3/4. It is a lot easier to resolve problems one on one. We will do our best to work out any issues there may be. Material: Steel. NOT previously rejected for quality issues or rescued from a scrap yard.
• 1/2x3-3/4 Red Head Wedge Anchors 1/2x13x3-3/4 Concrete Anchor 1/2-13 x 3.75 - Red Head Wedge Anchors. Thread:13 (Coarse Thread). Nut Wrench Size:3/4. It is a lot easier to resolve problems one on one. We will do our best to work out any issues there may be. Material: Steel. NOT previously rejected for quality issues or rescued from a scrap yard.
• 5 X Hilti 387064 Anchor Rod Hit -V 19ft16 X 150 Galv. Zinc Plated - Flexible anchoring depths for maximum performance and maximum economy Higher productivity - optimal anchor rod lengths and diameters save time and money in your fastening Universality - simplified storage of anchor rods by using the same rod for different applications Approvals – System with ETA approval for flexible anchoring depths with anchor rods M16 Marking on the head - easy check of the anchorage after installation (marking on the head indicates rod length and steel grade)  Fastenings in concrete and masonry in conjunction with Hilti HIT injection mortar Applications where flexible anchorage depths are required Head marked for easy verification of st.
• (50-Pk) The Hillman Group Wedge Anchor 3/8" X 3-3/4" 371932 - As Shown - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• 3/8x5 Red Head Stainless Steel Wedge Anchors 3/8x16x5 Concrete Anchor 3/8-16 x 5 - Red Head Wedge Anchors. Thread:16 (Coarse Thread). Nut Wrench Size:7/16. Material: Stainless Steel. Finish:Stainless Steel. It is a lot easier to resolve problems one on one. We will do our best to work out any issues there may be.
• 3/8x2-3/4 Red Head Wedge Anchors 3/8x16x2-3/4 Concrete Anchor 3/8-16 x 2.75 - Red Head Wedge Anchors. Thread:16 (Coarse Thread). Nut Wrench Size:7/16. It is a lot easier to resolve problems one on one. We will do our best to work out any issues there may be. Material: Steel. NOT previously rejected for quality issues or rescued from a scrap yard.
• 3/8x2-1/4 Red Head Wedge Anchors 3/8x16x2-1/4 Concrete Anchor 3/8-16 x 2.25 - Red Head Wedge Anchors. Thread:16 (Coarse Thread). Nut Wrench Size:7/16. It is a lot easier to resolve problems one on one. We will do our best to work out any issues there may be. Material: Steel. NOT previously rejected for quality issues or rescued from a scrap yard.
• 1/4x2-1/4 Red Head Wedge Anchors 1/4x20x2-1/4 Concrete Anchor 1/4x20 x 2.25 - Red Head Wedge Anchors. Thread:20 (Coarse Thread). Nut Wrench Size:7/16. It is a lot easier to resolve problems one on one. We will do our best to work out any issues there may be. Material: Steel. NOT previously rejected for quality issues or rescued from a scrap yard.
• 1/4x1-3/4 Red Head Wedge Anchors 1/4x20x1-3/4 Concrete Anchor 1/4x20 x 1.75 - Red Head Wedge Anchors. Thread:20 (Coarse Thread). Nut Wrench Size:7/16. It is a lot easier to resolve problems one on one. We will do our best to work out any issues there may be. Material: Steel. NOT previously rejected for quality issues or rescued from a scrap yard.
• 10 Pack DEWALT 1" x 9" Wedge Anchor Zinc-Plated Steel 7463SD1-PWR - New without original packaging 10 Pack DEWALT 1" x 9" Wedge Anchor: Steel Zinc Plated 7463SD1-PWR. DEWALT Wedge Anchor: Steel, Seismic Approved, Zinc Plated, 1 in Anchor Dia., 9 in Anchor Lg, 10 PK
• 12 Pack - Simpson Titen HD Concrete Anchor 3/4 x 7" Hex/Flange Anchor Bolt
• 5/8x6 Wedge Anchors Zinc Plated Steel 5/8-11x6 Concrete Anchor 5/8x11 x 6 - Concrete Wedge Anchors. Finish:Zinc Plating. Nut Wrench Size:15/16. Material: Steel. NOT previously rejected for quality issues or rescued from a scrap yard. It is a lot easier to resolve problems one on one.
• 13 Stainless Steel Wedge Anchors with Nuts & Washers 316 Grand
• Parawedge Concrete Anchors 1/4" X 2*1/4" (25 Qty) By Cobra #491M
• Lot of 4 Concrete Anchor Bolts 5/8" x 6" - As the history of the item is not always known. 042623EP Warehouse. Love this item?.
• Powers Fasteners 7416SD1-PWR 3/8 X 5 Wedge Anchors Sd1 50Pk - Model POWR 7416SD1. • (50) Wedge Expansion Anchors. • Evaluated and qualifi ed by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors).
• Powers Fasteners 7404SD1-PWR 1/4 x 3-1/4 Wedge Anchors SD1 100 Pack - Model POWR 7404SD1. Suitable base materials are normal-weight and sand-lightweight concrete. The anchor is manufactured with carbon steel body and expansion clip or a stainless stee. • (100) Wedge Anchors.
• Red Head Hammer-Set nail Drive Concrete Drive Anchors 1-1/4" X 2" 30 PCS - X 1-1/2 in. LTL (Less than Truck Load) Freight Information. We do our best to select the pieces that we would love to own ourselves and list any noticeable flaws or problems.
• DeWalt Power Stud 7413SD1 41 Pcs
• Uline H-2121 Concrete Installation Kit H2121! 4 one inch Anchors! Brand NEW Set! - Uline H-2121 Concrete Installation Kit H2121! 4 one inch Anchors! Brand NEW Set!.
• Hilti 282524 KB3 3/8x5 - 3/8"" x 5" Wedge Anchors - Box of 18 Anchors - Hilti 282524. Wedge Anchors. Box of 18 Anchors. Local pickup is OKAY. WEBBER'S TREASURES.
• Hilti 2210257 KB-TZ2 - 1/2" x 7" Wedge Anchors - Box of 11 Anchors - Hilti 2210257. 1/2" x 7" Wedge Anchors. Box of 11 Anchors. Local pickup is OKAY. WEBBER'S TREASURES.
• Hilti 387509 KB-TZ - 3/8"" x 3" Wedge Anchors - Box of 26 Anchors - Hilti 387509. Wedge Anchors. Box of 26 Anchors. Local pickup is OKAY. WEBBER'S TREASURES.
• Hilti 2210256 KB-TZ2 - 1/2" x 5-1/2" Wedge Anchors - Box of 18 Anchors - Hilti 2210256. 1/2" x 5-1/2" Wedge Anchors. Box of 18 Anchors. Local pickup is OKAY. WEBBER'S TREASURES.
• Red Head Concrete Anchoring System 50PK - 6 Boxes (New Open Box) - 6 Boxes of 50 ea. that's 300 total for one great price!
• Wedge Anchor Kit for Floor Ground Concrete - 1/2' x 2 3/4" - Wedge Anchor Kit
• 10x. Bolt Anchor 316 Stainless Steel M20x160 - 10x. Bolt Anchor 316 Stainless Steel M20x160.
• Wej-it PD58 Concrete Anchors 7/8 x 3-13/16 (5 pack) - Wej-it Toggler Concrete Anchors, Works for many applications including Max-Jax and other Automotive Lifts
• Dewalt Power-Stud SD1 Concrete Anchor 10Pk 7/8" Dia x 6" Long 7450SD NEW - 7/8" Dia x 6" Long 7450SD Box of 10pc Including Nuts and Washers. The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Consistent performance in high and low strength concrete.
• Hilti Kwik Bolt TZ2 CS Wedge Carbon Steel Stud Anchor 5/8"x6" Box/15 - The Hilti KB-TZ2 CS Wedge Anchor Bolt Hilti's newest generation of Kwik Bolts and successor to the KB-TZ The KB TZ2 Carbon Steel Expansion Anchor is raising the industry standard for stud anchors. Hilti Kwik Bolt TZ2 CS Wedge Stud Anchor 5/8"x6" 15/Anchors Bx.
• Confast American Made Thunderstud Wedge Anchors 316 Stainless Steel 1/2" x 4-1/2 - CONFAST 1/2" X 4 1/4" American Made Thunderstud 316 SS Concrete Wedge AnchorITEM : AMERICAN MADETHUNDERSTUD 316 STAINLESS STEEL CONCRETE WEDGE ANCHOR MADE IN AMERICA:   Assures top quality and meets most Made in America requirements  PATENTED UNIVERSAL CLIP:   Anchor does not spin in the hole which makes each fastening faster and more secure  PARTIAL THREADS:   Assures proper anchor length is used to meet minimum embedment depths  LENGTH I. D.
• Hilti Kwik Bolt 3 Hot Dip Galvanized Concrete Wedge Anchor 1/2" X 7" LT - The Hilti Kwik Bolt 3 HDG is designed from carbon steel and is hot dipped galvanized. This anchor is made for use Hilti Kwik Bolt 3 KB3 Hot Dip Galvanized HDG Concrete Wedge Anchors in fastening to concrete only and should never be used in block or brick base material. Base Materials for use in lightweight Concrete, uncracked concrete, lightweight concrete over metal deck, grout filled block anchor material. Application: fastening structural steel, attaching low exposure handrails and signs, attaching low exposure seating and bleachers, Fastening industrial and mechanical Equipment.  Through fixture installation and raised dog point to prevent thread damage during installation. Mechanical expansion allows immediate load application. Hole diameter 1/2 inch, Ancor 7-inch thread length. Spacing must be a minimum of 10 anchor diameters.
• Zoro Select B70420.062.0500 Wedge Anchor,Ss,303 And 304,Plain,Pk48 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 5/8 in, Anchor Length 5 in, Max. Work Thickness 1 1/8 in, Thread Length 3 13/16 in, Thread Size 5/8 In.-11, Min.
• Zoro Select B70420.037.0300 Wedge Anchor,Ss,303 And 304,Plain,Pk230 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 3 in, Max. Work Thickness 9/16 in, Thread Length 1 1/2 in, Thread Size 3/8 In.-16, Min.
• Red Head 1/2 in. x 4-1/4 in. Steel Hex-Nut-Head Concrete Wedge Anchors (10-Pack) - Red Head 1/2 in. x 4-1/4 in. Steel Hex-Nut-Head Concrete Wedge Anchors (10-Pack).
• Tri-Built 1 1/4" Concrete Hammer Drive Pin Masonry Anchors Zinc - A couple removed from box of 100; call it 95+ new anchors in box.
• (QTY 30)5/16 x 2 3/4 Strike Concrete Wedge Anchors Hammer Drive Pin Anchor Bolts - Compression anchors may also be pre-expanded and/or used in conjunction with a drive nail. Strike anchors, also known as hit anchors, are intended for light to heavy-duty applications, anchoring into concrete, brick or block.
• ( QTY 160 ) 3/8 x 1 7/8 Concrete Wedge Anchors Bolts Masonry Sleeve Anchor Zinc - Sleeve anchors are the most versatile masonry expansion anchors because they can be used in. The wedge anchor, drop-in anchor and concrete strike anchor can only be used in solid concrete and have the highest & most consistent holding values in concrete.
• ( QTY 160 ) 3/8 x 3 Concrete Wedge Anchors Bolts Masonry Sleeve Anchor Zinc - Sleeve anchors are the most versatile masonry expansion anchors because they can be used in. The wedge anchor, drop-in anchor and concrete strike anchor can only be used in solid concrete and have the highest & most consistent holding values in concrete.
• (QTY 25) 1/2 x 2 3/4 Strike Concrete Wedge Anchors Hammer Drive Pin Anchor Bolts - Compression anchors may also be pre-expanded and/or used in conjunction with a drive nail. Strike anchors, also known as hit anchors, are intended for light to heavy-duty applications, anchoring into concrete, brick or block.
• 50pc Marksmen Wedge Anchor 1/2 in X 2 3/4 in Stainless Steel 303 - 50pc Marksmen Wedge Anchor 1/2 in X 2 3/4 in Stainless Steel 303. Condition is new. Shipped USPS or UPS. Nice set of 50 with nut and washer. Brand new in the box. If you have questions or need additional pictures, please ask before bidding. Comes from a pet free, smoke free home. Please follow for coupons on unique items!
• Hillman Hex Head Sleeve Anchor Grade 5 Zinc Plated Steel 1/2" x 2-3/4" - We will take care of you!
• Powers 7436SD2 Power Stud Wedge Expansion Anchor 7 in, 5/8 in Thread, 25 Pack DB - The SD2 is manufactured with a zinc plated carbon steel body and stainless steel expansion clip for premium performance. Manufactured with a zinc plated carbon steel body and stainless steel expansion clip.
• Sammys Threaded Rod Anchoring System 1" Sidewinder Pipe Hanger 8055957 (QTY25)
• Glarks 20Pcs 3/8" x 2-3/4" Wedge Anchors Zinc Plated Heavy Duty Fastener for ... - √ Great for use in CONCRETE only, and should never be used in block or brick base material. ※The color may exist slight difference due to different screen display. We are always working hard for maintain high standards of excellence and resolve your problem in best way.
• Glarks 12Pcs 1/2" x 3-3/4" Wedge Anchors Zinc Plated Heavy Duty Fastener for ... - √ Great for use in CONCRETE only, and should never be used in block or brick base material. ※The color may exist slight difference due to different screen display. We are always working hard for maintain high standards of excellence and resolve your problem in best way.
• Glarks 12Pcs 1/2" x 4-3/4" Wedge Anchors Zinc Plated Heavy Duty Fastener for ... - √ Great for use in CONCRETE only, and should never be used in block or brick base material. ※The color may exist slight difference due to different screen display. We are always working hard for maintain high standards of excellence and resolve your problem in best way.
• Glarks 12Pcs 1/2" x 7" Wedge Anchors Zinc Plated Heavy Duty Fastener for Conc... - √ Great for use in CONCRETE only, and should never be used in block or brick base material. ※The color may exist slight difference due to different screen display. We are always working hard for maintain high standards of excellence and resolve your problem in best way.
• Mkt Fastening 2511490 Wedge Anchor,Gr 5,1 1/4X 9 In,Pk5 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 1 1/4 in, Anchor Length 9 in, Max. Work Thickness 1 1/4 in, Thread Length 3 1/4 in, Thread Size 1 1/4 In.-7, Min.
• DeWalt Power-Stud 7413SD1 Seismic Anchors 3/8"ANSI 1-3/4" MIN. or as Specified - DeWalt Power-Stud 7413SD1 Seismic Anchors 3/8"ANSI 1-3/4" MIN. or as Specified. TA3-1
• (2-Pk) Applied Wedge Anchors 1-In x 9-In 10069 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Andersen Wedge Stop Red 3-3/8" x 8-1/2" - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• (7-Pk) Zinc Anchor 3/4"-10" x 3-3/4" - (7-Pk) Zinc Anchor 3/4"-10" x 3-3/4". We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• (2-Pk) Fabory Wedge Anchor Zinc Plated 3/4" x 6-1/4" 31JP34 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Red Head Wedge Anchor 1/2" Diamter x 7" Length 50306 - We will take care of you!
• 50PK 5 1/2” X 1/2” Concrete Wedge Anchor Yellow Zinc Plated - 50PK 5 1/2” X 1/2” Concrete Wedge Anchor Yellow Zinc Plated.
• Hilti KCM-MD Kwik Cast Cast-In-Place Anchor Grey 5/8" x 3/4" 3614655 - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you!
• Crown Bolt Lag Shields, Short 5/8in X 2 in Zinc Alloy 25 Pieces - Your issues will be solved quickly and positively.
• 'Atlas' 6' Jack Plate Heavy Duty - With our dynamic pricing model, our prices are always competitive.
• 'Atlas' 6' Jack Plate Heavy Duty - With our dynamic pricing model, our prices are always competitive.
• 'Atlas' 4' Jack Plate Polished - With our dynamic pricing model, our prices are always competitive.
• Hilti 5/8"x 4 3/4" KB-TZ2 Wedge Anchors #2210271 (15ea) NEW - Ultimate-performance wedge anchor for cracked concrete and seismic (carbon steel). Material, corrosion: Carbon steel, zinc-plated.
• 5/8" x 6" Wedge Anchor | Hot Dip Galvanized | with Hex Nut and Flat Washer| per - Head Type: Hex Nut with Flat Washer, Finish: Hot Dip Galvanized.
• Everflow Sammys 8059957 CST 20 3/8" Screw Pack of 25 Zinc for Concrete - Sammys 3/8-16 x 1-3/4 Box of 25 Threaded Rod Hangers Anchor for Concrete 8059957. Everflow Sammys Installs Vertically into the Bottom of Concrete Structures for Hanging Threaded Rod. It is made up of Steel with Zinc-Climaseal Finish, it's Blue Delta Seal provides extended corrosion resistance.
• Red Head Sleeve Anchors 3/8” X 3” - Red Head Sleeve Anchors 3/8” X 3” for use in concrete or block. Anchors are in original box, but will put in small flat rate box to save on shipping if requested.
• 25 Pack; Simpson Strong-Tie 1/2" x 5-1/2" Stong-Bolt 2 Wedge Anchor STB2-50512 - See photos. In the event that any clauses or phrases contained here within are ruled out by a judge, the law, a lawyer, jurors, and or any other entity all others remain in effect. Most boxes have been opened for inspection and photos.
• 10 Pack; QWORK 5/16" x 2-3/4" Wedge Anchor, 316 Stainless Steel - See photos. In the event that any clauses or phrases contained here within are ruled out by a judge, the law, a lawyer, jurors, and or any other entity all others remain in effect. 1007 Warehouse Location:___Warehouse #2_Shelf_____33109 box 16050 _____________________________.
• QTY=18 Pcs; Simpson Strong-Tie Strong-Bolt 2 Wedge Anchor 1/2" x 5-1/2" NO NUTS! - Model: STB2-50512. See photos. Includes x18 Pcs what is shown in the picture.
• 12 Pack, Wedge Anchors, Please View Photos & Details
• 100-Pack NEW Metallics 5/16" x 1/2" Drive Pins Steel Zinc-Plated DP-1 - 5/16" head, 1/2" long. Fruit Ridge Tools, LLC.
• Anchor Bolt Galvanized 1/2" x 7" - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• DEWALT Wedge Anchor: Steel, Zinc Plated, 3/8” x 2 3/4” 7412SD1 - DEWALT Wedge Anchor: Steel, Zinc Plated, 3/8” x 2 3/4” 7412SD1.
• Wej-It Ankr-TITE Wedge Anchors Galvanized 3/8"X5" 49 Pcs ,Stainless 5/8"x4" 2pc - Wej-It Ankr-TITE Wedge Anchors hot dipped Galvanized 3/8"X5" 49 Pcs ,Stainless steel 3/8"x4" 2pcs. I also have other “Wej-It Ankr-TITE Wedge Anchors Stainless Steel 3/8"X3" 48 Pcs & 3/8"x4" 2pcs. “ for sale.
• Lot Box Of 100 Pieces 1/2-13 x 2 3/4" Wedge Anchor ZINC CR+3 - Lot Box Of 100 Pieces 1/2-13 x 2 3/4" Wedge Anchor ZINC CR+3.
• 1/2'' x 4-1/2'' 10 PCs Wedge Concrete Wall Anchors Bolt Zinc Plated Heavy Dut... - 1/2" x 4-1/2" 10 PCs Wedge Concrete Wall Anchors Bolt Zinc Plated Heavy Duty Fastener for Concrete (1/2" x 4-1/2", 10). We are always working hard for maintain high standards of excellence and resolve your problem in best way.
• 1/2'' x 3-1/2'' 10 PCs Wedge Concrete Wall Anchors Bolt Zinc Plated Heavy Dut... - 1/2" x 3-1/2" 10 PCs Wedge Concrete Wall Anchors Bolt Zinc Plated Heavy Duty Fastener for Concrete (1/2" x 3-1/2", 10). We are always working hard for maintain high standards of excellence and resolve your problem in best way.
• 1/2'' x 3-1/2'' 25 PCs Wedge Concrete Wall Anchors Bolt Zinc Plated Heavy Dut... - 1/2" x 3-1/2" 25 PCs Wedge Concrete Wall Anchors Bolt Zinc Plated Heavy Duty Fastener for Concrete (1/2" x 3-1/2", 25). We are always working hard for maintain high standards of excellence and resolve your problem in best way.
• FASTENAL Lot of 4 Concrete Wedge Anchors 5/8"x5" Powers NEW - Item is in NEW in PKG Condition--SEE Pics.
• DeWALT Lot of 18 Power Stud Concrete Wedge Anchors 5/8"x3-1/2" Zic Plated NEW - Item is in NEW in PKG Condition--SEE Pics.
• (25-Pk) Sammys Threaded Rod Anchoring System 1" Sidewinder Pipe Hanger 8055957 - The product image is the actual item you will receive including all contents unless otherwise noted. We are not an authorized dealer of this product. This product has no manufacturers warranty.
• VARIOUS New old stock Star Tampin Concrete Screw Anchors & RAWL CALK-IN TOOLS
• Lot of 3 Boxes NEW Uline H-2121 Concrete Installation Kits (4 in each Box) - Lot of 3 Boxes NEW Uline H-2121 Concrete Installation Kits. ULINE H-2121, Floor Anchor Kit, Concrete Installation Kit for Safety Guards, Qty 4 in each Box (3 Boxes Total). Not compatible with asphalt.
• (100) FASTENAL Concrete Wedge Anchor Bolts 1/4 x 1-3/4 W/Nuts & Washers - (100) FASTENAL Concrete Wedge Anchor Bolts 1/4 x 1-3/4 W/Nuts & Washers.
• M6 M8 M10 M12 M16 Drop in Anchors Masonry Brick Concrete Sleeve Anchors Metric - Thread specifications : M6 M8 M10 M12 M16. M16 x 2 mm pitch. M8 x 1.25 mm pitch. M12 x 1.75 mm pitch. M10 x 1.50 mm pitch. M6 x 1.00 mm pitch. Material : 304 Stainless Steel / 316 Stainless Steel / Zinc Plated Steel.
• Zoro Select U70420.075.1200 Wedge Anchor,3/4",12",303/304,Pk2 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 12 in, Max. Work Thickness 4 in, Thread Length 3 1/4 in, Thread Size 3/4 In.-10, Min.
• Zoro Select B09200.037.0287 Sleeve Anchor,Flat Head Hex,Pk225 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 3/8 in, Anchor Length 2 7/8 in, Thread Size 5/16, Min. ZORO SELECT. Zoro Select 463-100Gr 1/2" Mnpt X 10" Tbe Red Brass Pipe Nipple Sch 40.
• Zoro Select B09200.037.0600 Sleeve Anchor,Flat Head Hex,Pk150 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 3/8 in, Anchor Length 6 in, Thread Size 5/16, Min. ZORO SELECT. Video Mount Products Pdslc Adaptor,Adjustable,Gray. General Purpose.
• Zoro Select B09150.025.0137 Sleeve Anchor,Hex Nut,1/4" Dia.,Pk1100 - Sleeve Anchor, Stainless Steel, Material Grade 304, Anchor Dia. 1/4 in, Anchor Length 1 3/8 in, Thread Size 10, Min. ZORO SELECT. Zoro Select U51070.016.1200 Fully Threaded Rod, 8-32, 1 Ft, 18-8 Stainless.
• Zoro Select B09200.025.0312 Sleeve Anchor,Flat Head Hex,Pk500 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 1/4 in, Anchor Length 3 1/8 in, Thread Size 10, Min. ZORO SELECT. General Purpose. Lincoln Electric Kp3700-1 Outside Cover Lens, Pk5.
• 1/2”x7” wedge anchor stainless steel Dewalt 07326-pwr - 1/2”x7” wedge anchor stainless steel Dewalt 07326-PWR box of 25PK
• (62) Concrete Wedge Anchor Bolts 3/8 x 3-3/4 w/ some Nuts & Washers - (62) Concrete Wedge Anchor Bolts 3/8 x 3-3/4 w/ some Nuts & Washers. ***The bag with nuts and washers is open and is not complete for all 62 anchors. The picture shows what is included. Feel free to count them, but that is what you will receive. To be clear...there will NOT be enough nuts and washers to use on all 62 anchors. This listing is for the anchors, the nuts and bolts are included as a bonus. Thanks for looking. A-2-3
• Wej-it Wedge Anchors 3/4 ×4-3/4 - Wej-it Wedge Anchors 3/4 ×4-3/4.
• Anchor Nut Galvanized Steel 1-1/4" - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Hillman Power Stud 1/4 In. x 2-1/4 In. Zinc-Plated Wedge Anchor (40 Ct.) 370980 - Power Fasteners Power Stud anchor . Steel/zinc-plated. For use in concrete, stone, brick, and block. for medium to heavy-duty loads. Drill hole same diameter as anchor. Exact hole depth is not required. Diameter: 1/4 In. .Length: 2-1/4 In. .Finish: Zinc .Minimum Embedment: 1-1/8 In. .Material: Steel .Size: .Color: Silver .Screws Included: .
• 100-PACK Rawl 1/4" Head Diameter x 1/2" Long Hammer Drive Pins Carbon Steel 1530 - For concrete and block. Features include Fruit Ridge Tools, LLC. Should not be used overhead.
• HILTI KB-TZ2 1/2”x 5 1/2" Concrete Wedge Stud Anchor Bolts..20 per box…NEW - HILTI KB-TZ2 1/2”x 5 1/2" Concrete Wedge Stud Anchor Bolts..20 per box…NEW.
• Red Head Concrete Anchors RL 58 - 5/8" Drop-In (Box of 18) #2G480 - Item 2G480. RED HEAD Drop-In Anchor: Zinc Plated, 5/8"-11 Anchor Thread Size, 1 in Anchor Dia.. Zinc Plated. Drill Bit Size. Anchor Thread Size. Thread Depth. Open Box.Only contains.18 PK. Drive Tools.
• (25-Pk) Drop-In Anchor Zinc Plated 5/8" - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
• 3M DBI-SALA 1003000 3Ft Web Tie-Off Adaptor - 3 ft pass-thru type tie-off adaptor. Durable polyester construction. Abrasion resistant polyester wear pad. We do our best to process as quickly as possible. NO APO, FPO, DPO, Or US territories and protectorates.
• Mkt Fastening 2658100 Wedge Anchor,Zinc Plated,5/8X10,Pk10 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 10 in, Max. Work Thickness 4 3/8 in, Thread Length 4 in, Thread Size 5/8 In.-11, Min.
• Q-19 Vintage Stretch Anchors 5/8'' Drill 5/16'' Bolt New Unused See Photos - Q-19 VINTAGE STRETCH ANCHORS 5/8'' DRILL 5/16'' BOLT NEW UNUSED SEE PHOTOS.
• Hilti 3/8" Sheild #409493 For Concrete lot of 50pcs
• 40 Simpson Heavy Duty 5/8"- 6" Wedge All Strong Tie Anchor Bolts Model WA62600 - Brand new never used.  40 bolts with nuts and washers.  Last time I checked Home Depot these were $4.25 each. Free Shipping.
• Platipus Rf3p 4legs With Anchor-heavy Duty Earth Anchor - Platipus Rf3p 4legs With Anchor-heavy Duty Earth Anchor. No int shipping
• Mkt Fastening 2634812 Wedge Anchor,Zinc Plated,3/4X8 1/2,Pk5 - Thermal Dynamics 9-8402 Electrode,Plasma Cutting Application,Pk5. Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/4 in, Anchor Length 8 1/2 in, Max.
• Hilti 5/8 in. x 7 in. Kwik Bolt TZ2 304 Stainless Hex Nut Wedge Anchor (13 ea) - Raising the industry standard again. Hilti's newest generation of Kwik Bolts - the Kwik Bolt TZ2 304 Stainless Steel Expansion Anchors - is raising the industry standard for wedge anchors. Don't settle for just any stud anchor.
• Simpson Strong-Tie STB2-37500 3/8" x 5" Zinc Wedge Anchor (50 ea) - A wedge-type expansion anchor designed for optimal performance in cracked and uncracked concrete as well as uncracked masonry. The Strong-Bolt 2 is available in carbon steel, Type 304 and Type 316 stainless steel.
• TACO Marine V12-4155BKA50-1 Flexible Rub Rail Vinyl Insert - 3/4″ X 3/8″ - TACO Marine's V12-4155BKA50-1 Flexible Rub Rail Vinyl Insert is sold in 50' lengths. It is designed for use with flexible rub rails. Its soft PVC insert provides a cushion effect to absorb impact. for use with flexible rub rail.
• 1/4-20 x 2-1/4" Wedge Anchor Zinc PK/25 - 1/4-20 x 2-1/4" Concrete Wedge Anchor w/ Flat Washer & Hex Nut / Zinc, BX/25. Coating = Clear Zinc Plating. Includes Nut & Flat Washer.
• 3/4-10 x 6-1/4" Wedge Anchor Zinc PK/10 - 3/4"-10 x 6-1/4" Concrete Wedge Anchor w/ Flat Washer & Hex Nut / Zinc Plated, BX/10. Coating = Clear Zinc Plating.
• MKT SUP-R STUD Wedge Anchor, Carb. Stl, 1/2"x3-3/4", PK50 2412334 - MKT SUP-R STUD Wedge Anchor, Carb. Stl, 1/2"x3-3/4", PK50 2412334. Shelf 7GMC
• MKT FASTENING Wedge Anchor, Zinc Plated, 1/2x2 3/4, 2612234 SUP R STUD box of 50 - MKT FASTENING Wedge Anchor, Zinc Plated, 1/2x2 3/4, 2612234 SUP R STUD box of 50. Shelf 7GMC
• (Lot of 10) Simpson Strong-Tie Wedge Anchor 5/8" x 7" STB2-62700 - Ten wedge anchors.
• MKT FASTENING Wedge Anchor, Galv. Steel, 5/8x4 1/2, PK5 2858412 - MKT FASTENING Wedge Anchor, Galv. Steel, 5/8x4 1/2, PK5 2858412. Wedge Anchor Type : Wedge Anchor. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 5/8 in, Anchor Length 4 1/2 in, Max.
• DeWalt Power Stud+ SD1 Wedge Anchors 20 Pack 3/4" x 4-3/4" Zinc Plated 7441SD1
• Red Head 1/2 in. x 3-3/4 in. WEDGE ANCHOR 10CT - Red Head 1/2 in. WEDGE ANCHOR 10CT. Red Head Wedge anchors are heavy-duty anchors designed for fastening into solid concrete. Steel construction with zinc plating for added durability. Helpful Links.
• Flat Head Galvinized Nails 1-1/4” HD Anchor Nail 1 Lb Net NOS - Flat Head Galvinized Nails 1-1/4” HD Anchor Nail 1 Lb Net NOS.
• 1/2” x 8-1/2” Concrete anchors - 1/2” x 8-1/2” Concrete anchors. Cleaning out garage stuff.  Washer and hex nut included. Thanks
• 6944SD-PWR - 5/8" x 5" Power-Bolt+ Heavy Duty Sleeve Anchor 15pk - 6944SD-PWR - 5/8" x 5" Power-Bolt+ Heavy Duty Sleeve Anchor 15pk.
• Red Head RL-58. Drop-In Concrete Fastener 5/8"-11 Bolt. - Red Head RL-58. Drop-In Concrete Fastener 5/8"-11 Bolt. B1-5
• Fastenal Hammer Drive Anchors. Nail In Anchor - see pictures - Fastenal Hammer Drive Anchors. Nail In Anchor - see pictures. See pictures.
• 50 Pack - DEWALT 7415SD1 - POWER-STUD+ Seismic Anchor - 3/8" x 3.75" - 50 Pack - DEWALT 7415SD1 - POWER-STUD+ Seismic Anchor - 3/8" x 3.75".
• (29) Concrete Wedge Anchor Bolts 5/8 x 8-1/2 Includes 29 Nuts & 22 Washers. - (29) Concrete Wedge Anchor Bolts 5/8 x 8-1/2 Includes 29 Nuts & 22 Washers. Also included is 2 Red Head in separate packages.
• Simpson Strong-Tie Wedge Anchors/Expansion Bolts 3/4 x 8 1/2" (10 ea) - This is a box of 10 ea 3/4" x 8 1/2" Expansion bolts / Wedge Anchors. NEW IN ORIGINAL BOX.
• MKT FASTENING 1312SS6 Drop-In Anchor,Non-Flange,1/2-13x2in,PK5 - MKT FASTENING 1312SS6. Drop-In Anchor,Non-Flange,1/2-13x2in,PK5. Drop-In Anchor, Non-Flange, Stainless Steel, Fastener Finish Plain, Anchor Thread Size 1/2 In.-13, Material Grade 316, Anchor Dia. 5/8 in, Anchor Length 2 in, Thread Depth 3/4 in, Bolt Dia.
• (10) Concrete Bent L Anchor Bolts 5/8 x 10" plain steel - Quantity of 10:  Concrete Bent L Anchor Bolts 5/8 x 10" plain steel.
• (10) Concrete Bent L Anchor Bolts 3/4-10 x 16" plain steel - Quantity of 10:  Concrete Bent L Anchor Bolts 3/4-10 x 16" plain steel.
• (10) Concrete Bent L Anchor Bolts 5/8 x 12" hot dip galvanized - Quantity of 10:  Concrete Bent L Anchor Bolts 5/8  x 12" long hot dip galvanized
• 6.5 In. X 6 In. Industrial Rubber Wedge - The Industrial Rubber Wedge is excellent for safety when stacking cylindrical objects. The rubber wedge resilience avoids creasing or wrinkling paper as well as scratching or marring surfaces and it increases its grip as weight is increased.
• (10) Concrete Bent L Anchor Bolts 3/4-10 x 12" plain steel - Quantity of 10:  Concrete Bent L Anchor Bolts 3/4-10 x 12" plain steel.
• 200 Flat Head 1/4" x 3" Split Drive Anchors Concrete Nail-In Hammer-In - Hillman - This includes 100 packs (200 pieces) of Flat Head 1/4" x 3" Split Drive Anchors.  Used for concrete.  Nail-In Hammer-In Hillman / Powers Fasteners. Note that the case got wet, and these can not be sold off the store shelf.  A few show signs of being wet. FREE SHIPPING!!!  Please let me know if you have any questions
• Red Head HN-3830 Dynabolt Concrete Sleeve Anchor 3/8" X 3 in. - However, we understand that THINGS HAPPEN! USED ITEM(S) : A used item can have different conditions such asGREAT with no imperfections sight on seen,GOOD with slight imperfections or slight wear/ scratches, orFAIR with very noticeable scratches or wear but in decent functional condition.
• Hammer Drive Nail Anchor 1/4” x 2” Mushroom Head Simpson Strong-Tie 12 pack / 96 - • Position fixture, insert Nailon anchor.
• (QTY 256) 3/8 x 2 1/4 Concrete Wedge Anchors Bolts Masonry Expansion Anchor Zinc - A non-bottom-bearing, wedge-style expansion anchor for use in solid concrete or grout-filled masonry. The Wedge-All. Threaded studs are set by tightening the nut to the specified torque. The Wedge-All is code listed for grout-filled masonry applications.
• ( QTY 2 ) 7/8 x 12 Concrete Wedge Anchors Bolts 304 Stainless Steel - In uncracked concrete & grout filled concrete masonry. The length of this anchor is the overall length of the anchor.
• ( QTY 50 ) 1/2 x 5 1/2 Concrete Wedge Anchors Bolts Power-Stud Zinc Plated - Wedge Anchor - Power-Stud 1/2” x 5 1/2” Concrete Screw Anchor Zinc Plated Powers Fasteners 50/B.
• (QTY 30) 3/8 x 2 3/8 Strike Concrete Wedge Anchors Hammer Drive Pin Anchor Bolts - Compression anchors may also be pre-expanded and/or used in conjunction with a drive nail. Strike anchors, also known as hit anchors, are intended for light to heavy-duty applications, anchoring into concrete, brick or block.
• (QTY 600) Tie Wire Wedge Anchor 1/4" x 2" Eye Bolt Concrete Expansion Anchors - Made of high-quality carbon steel and finished with zinc plating, the anchor is designed for normal-weight concrete or concrete over steel deck applications. Plus, with its ultimate shear strength of 920 lbs and ultimate tension strength of 680 lbs, you can trust the Tie Wire Wedge Anchor to keep your structures safe and secure.
• Split Drive Concrete Anchor Zinc 1/4 x 2-1/2 Mushroom Hammer Drive Nail-in 400 - The Split-Drive anchor is a one-piece expansion anchor that can be installed in concrete, grout-filled block and stone. (Overhead installation need not be blown clean.). Position fixture and insert split-drive anchor through fixture hole.
• (QTY 20) 3/8 x 4 3/4 Strike Concrete Wedge Anchors Hammer Drive Pin Anchor Bolts - Compression anchors may also be pre-expanded and/or used in conjunction with a drive nail. Strike anchors, also known as hit anchors, are intended for light to heavy-duty applications, anchoring into concrete, brick or block.
• (QTY 900) Tie Wire Wedge Anchor 1/4" x 2" Eye Bolt Concrete Expansion Anchors - Made of high-quality carbon steel and finished with zinc plating, the anchor is designed for normal-weight concrete or concrete over steel deck applications. Plus, with its ultimate shear strength of 920 lbs and ultimate tension strength of 680 lbs, you can trust the Tie Wire Wedge Anchor to keep your structures safe and secure.
• ( 25 ) 5/8" x 7" Concrete Wedge Anchors Steel Zinc Plated New - Material: Carbon Steel, Zinc Plated. Style: Hex Nut & Flat Washer. Quantity: 25 pcs. Our Ref: Rear PR, Area 11, 03-30-23. Size: 5/8" x 7". Drill Hole Size: 5/8". Condition: New. Series: Thunderstud.
• ( 100 ) 3/8 x 3" Concrete Wedge Anchor Bolts Includes Nuts & Washers New - Make: US Anchor Corp. Style: Hex Nut. Material: Carbon Steel, Zinc Plated. Our Ref: Rear PR, Area # 11, 03-30-23. Quantity: 100 Pcs. Condition: New.
• ( 100 ) 3/8 x 2-3/4" Concrete Wedge Anchor Bolts Includes Nuts & Washers New - Style: Hex Nut & Washer. Material: Carbon Steel, Zinc Plated. Our Ref: Rear PR, Area 11, 03-30-23. Quantity: 100 pcs. Condition: New.
• ( 100 ) 3/8" x 3-1/2" Concrete Wedge Anchors Carbon Steel USA New - Style: Hex Nut & Washer. Material: Carbon Steel, Zinc Plated. Our Ref: Rear PR, Area 11, 03-30-23. Quantity: 100 pcs. Condition: New. Series: Thunderstud.
• Mkt Fastening 2578800 Wedge Anchor,Gr 5,7/8 X 8 In,Pk10 - Mkt Fastening 2578800 Wedge Anchor,Gr 5,7/8 X 8 In,Pk10.
• ini moni 1/2 x 3-3/4 Concrete Anchor Stainless Steel Heavy Duty Wedge Anchor ... - 【Fastener for Concrete】: Concrete wedge anchor is only suitable for concrete, not for blocks or brick substrates, etc. It is very convenient for you to carry and easy to install. Whether you are securing a safe to concrete in your garage or attaching a boat lift to a seawall, you can count on Concrete Wedge Anchors to hold tight.
• 3/4 x 4-1/4" Masonry Sleeve Anchors 5 pcs. Made in U.S.A. NEW - 3/4 x 4-1/4" Masonry Sleeve Anchors 5 pcs. Made in U.S.A. NEW. Type: Sleeve Anchors, Pipe Hanger. Style: Hex Nut. Quantity in Box: 5 pcs. Condition: New. Make: Unifast Industries Inc.
• 3/4" x 2-1/2" Masonry Sleeve Anchors 10 pcs USA New - 3/4" x 2-1/2" Masonry Sleeve Anchors 10 pcs. Type: Masonry Sleeve Anchors, Pipe Hanger. Quantity: 10 pc. BUFFALO, NY. Series: Thunderbolt.
• 100 3/8"-16 X 3 3/4" Wedge Anchors 304 Stainless Steel Power Bull - Box of 100 Power Bull 304 stainless wedge anchors 3-3/4" long. Bought a few years ago but then switched to 1/2" so these have just been sitting around. New condition as shown in photo.
• (Lot of 20) 3/8" x 3" Anodized Concrete Wedge Anchor Bolts - LOT 0F (20)! If you need more (or less), or are looking for a specific amount please email me. I can create a special listing just for you. I have over (160) of these on hand right now. If you need larger quantities the price would go down. Let me know your needs.
• 1 Wedge Anchor Bolt 1/2" x 5 1/2" Nut Washer Stainless Steel 316 - 1 x 304 Stainless steel Bolt, with 1 washer and 1 Nut, (all 316 stainless steel). 1 Stainless Steel Wedge Anchor Bolt Set. 316 is a special type of SS with extra durability against cholrine and salt.
• HILTI #304811 Steel Concrete Connector MC-C90-AA - 1 pack - HILTI #304811 Steel Concrete Connector MC-C90-AA with hardware kit.
• Lot Of 50 1/2 In. x 2-3/4 In. Power-Stud Carbon Steel Wedge Expansion Anchor - The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included. x 2-3/4 In. Power-Stud Carbon Steel Wedge Expansion Anchor. Power-Stud Carbon Steel Wedge Expansion Anchor - 50 Anchors.
• Lot Of 10 1/2 In. x 2-3/4 In. Power-Stud Carbon Steel Wedge Expansion Anchor - The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included. x 2-3/4 In. Power-Stud Carbon Steel Wedge Expansion Anchor. Consistent performance in high and low strength concrete.
• Wedge Anchor 3/4" x 7" Galvanized Qty. 10 pieces fastener WA75700MG - Wedge Anchor 3/4" x 7" Galvanized Qty. 10 pieces fastener WA75700MG. The box has either been opened for photos or already opened when we receive it. All parts and pieces are check for quality. We will do our best to describe each part and give the part numbers.
• Wedge Anchor 1"-8x9" Zinc CR+3 Qty. 8 pieces Commercial fastener - Brithon Best Zinc Wedge Anchors. Size: 1-8x9" CR+3 RoHS Compliant. The box has either been opened for photos or already opened when we receive it. All parts and pieces are check for quality.
• Simpson Strong Tie WA50234 Wedge-All Wedge Anchor 1/2 x 2-3/4" (25/bx) - Simpson Strong Tie WA50234 Wedge-All Wedge Anchor 1/2 x 2-3/4" (25/bx). Have a few boxes of these left over from job while back. Some boxes may be previously opened/damaged box, however I gaurantee all hardware to be present and brand new inside and %100 functional. Thanks for looking, ask any questions before buying all sales are final. Also very much appreciate positive feedback after order if satisfied and ill return the favor. Thanks again
• ITW Red Head 11013 - 3/8" x 3" Hex Sleeve Anchor - Pkg of 15 - ITW Red Head 11013 - 3/8" x 3" Hex Sleeve Anchor - Pkg of 15. Neal Liquidations has been an eBay member since 2007 and is here to serve you with quality service and products you can depend on being only the best. We want you to get great deals at great prices and return to shop with us again and again! STOCK #69AB
• 10 Red Head Stainless Steel Wedge Anchors 1X9” - 10 Red Head Stainless Steel Wedge Anchors 1X9”.
• 20 Red Head Stainless Steel Wedge Anchors 3/4X10” - 20 Red Head Stainless Steel Wedge Anchors 3/4X10”.
• 3/8 x 5 Wej-It Flat Head Sleeve-TITE™ Sleeve Anchor 304 Stainless Steel
• Zoro Select U09100.025.0137 Sleeve Anchr,Hex,Cst,1/4In,1-3/8In,Pk100 - ZORO SELECT. Zoro Select 5Tpg6 Double Rod Pegboard Hook,2-13/16 In,Pk10. Zoro Select 5Tpd8 Double Rod Pegboard Hook,8-1/4 In,Pk5. Zoro Select 5Tpd2 Single Rod Pegboard Hook,4 In,Pk10. Zoro Select 5Tpg4 Single Rod Pegboard Hook,6 In,Pk10.
• ( QTY 60 ) 3/8 x 3 Concrete Wedge Anchors Bolts Masonry Sleeve Anchor Zinc - Sleeve anchors are the most versatile masonry expansion anchors because they can be used in. The wedge anchor, drop-in anchor and concrete strike anchor can only be used in solid concrete and have the highest & most consistent holding values in concrete.
• (QTY 200) Tie Wire Wedge Anchor 1/4" x 2" Eye Bolt Concrete Expansion Anchors - Made of high-quality carbon steel and finished with zinc plating, the anchor is designed for normal-weight concrete or concrete over steel deck applications. Plus, with its ultimate shear strength of 920 lbs and ultimate tension strength of 680 lbs, you can trust the Tie Wire Wedge Anchor to keep your structures safe and secure.
• GRAINGER APPROVED B09100.037.0250 Sleeve Anchor,Hex Nut,3/8" Dia.,PK250 - GRAINGER APPROVED B09100.037.0250. Sleeve Anchor,Hex Nut,3/8" Dia.,PK250. Grainger reserves the right to accept or reject any order. Grainger Part #:177V46. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
• Concrete Wedge Anchor Wedge Anchor Zinc Plated 3/8" Expansion Strong-Tie Bolt
• 1/2" -13 x 2-1 2 Wedge Anchor New Open Box Never Used Brand New - 1/2"-13 x 2-1 2 Wedge Anchor New Open Box Never Used  Brand New
• Zoro Select B70420.075.0425 Wedge Anchor,Ss,303 And 304,Plain,Pk36 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 4 1/4 in, Max. Work Thickness 9/16 in, Thread Length 1 3/4 in, Thread Size 3/4 In.-10, Min.
• Simpson Wedge-all WA87600 Wedge Anchor Qty 5 - Simpson Wedge-all WA87600 Wedge Anchor Qty 5. ITEM ON HAND READY TO SHIP ITEM ONLY COMES WITH WHAT IS PICTURED
• (10-Pk) Blue Wedge Coarse Thread Anchor Bolts 3/4-10" x 7" - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
• (25-Pk) Powers Wedge Anchor Zinc 1/2" x 5-1/2" 371942 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Concrete Stud Anchors 7423SD1-PWR By 1/2" x 4-1/2", 50Pk + 19 (extra) - Powers Fasteners 7423SD1-PWR Power-Stud Anchors 1/2" x 4-1/2", 50Pk + 19 (open). One unopened 50 pack +19 additional from open pack.
• Powers Stainless steel Concrete Anchors - 3/4"x 5-1/21". 07342-PWR Box of 20 - Powers Fasteners - Concrete Anchors - 3/4in. dia, 3/4in. Drill, 5-1/2in. Oal, Wedge Expansion Concrete Anchor - Stainless Steel. • ICC Approved for Cracked Concrete- No. • ICC Approved for Un-Cracked Concrete- No.
• Wejit Concrete Wedge Anchor XBG1010 1 X 10 25.4mm X 254mm - Why buy through us?. Have an issue?. Listed By: FF.
• Wedge-All 5/8 In. X 6 In. Type 316 Stainless-Steel Expansion Anchor (20-Pack) - The Wedge-All wedge-style expansion anchor is intended for use in solid concrete or grout-filled masonry. This anchor is best suited in installations where a building code approval for seismic and cracked/uncracked concrete is not required.
• (QTY 50) 3/8 x 4 3/4 Strike Concrete Wedge Anchors Hammer Drive Pin Anchor Bolts - Compression anchors may also be pre-expanded and/or used in conjunction with a drive nail. Strike anchors, also known as hit anchors, are intended for light to heavy-duty applications, anchoring into concrete, brick or block.
• Dewalt 5/8 In. X 3-1/2 In. Power-Stud Carbon Steel Wedge Expansion Anchor - 2... - The anchor is manufactured with a zinc-plated carbon steel body and expansion clip for premium performance. nut and washer are included. Consistent performance in high and low strength concrete. Anchor design allows for follow-up expansion after setting under tensile loading.
• Red Head LDT-3840 Large Diameter Tapcon 3/8-Inch by 4-Inch Anchor 50 per Box - Click here to see description.
• Red Head LDT-3816 Large Diameter Tapcon 3/8-Inch by 1-3/4-Inch Anchor 50 per Box - Click here to see description.
• Wedge Anchor 2906 *Lot of 3* - NV3192 – Wedge Anchor 2906. Model/Cat No.: 2906.
• Dewalt 7413SD1 Wedge Anchor SDI 3/8 x 3-Inch - 50 Pack Power-Stud+
• Red Head Trubolt Wedge Anchor 1/2" Diameter x 7" Length Hot-dipped Galv 50306 - Wedge anchors for heavy duty concrete use.
• 5 Pack Anchor #4070 Machine Screw Expansion Anchors 3/4" Drill x 3/8"-16 - We do not give or warrant. We will reply to you As Soon As Possible. 100% Authentic.
• DEWALT Wedge Expansion Anchors POWERSTUD - 1/2" X 5 1/2" - QTY: 46 - 07324-PWR - Quantity: 46. 2-1/4" minimum. 5-1/2" x 1/2". UPC: 075352073248.
• 1/2'' x 7'' 5 PCs Wedge Concrete Wall Anchors Bolt Zinc Plated Heavy Duty Fas... - 1/2" x 7" 5 PCs Wedge Concrete Wall Anchors Bolt Zinc Plated Heavy Duty Fastener for Concrete (1/2" x 7", 5). Material: Made of carbon steel & zinc plated surface for corrosion resistant.
• RED HEAD Wedge Anchor, 304 SS, 5/8x7, PK10 WW-5870 - Wedge Anchor Type : Expansion Wedge Anchor. Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 5/8 in, Anchor Length 7 in, Max. Work Thickness 3 5/8 in, Thread Length 3 1/2 in, Thread Size 5/8 In.-11, Min.
• (50-Pk) Red Head Trubolt Wedge Anchor 316 Stainless Steel Wedge 3/8" x 3-3/4" - We will take care of you!
• Delf 10mm Blue Builders Wedge - 35 Pack - AUSTRALIA BRAND - 10mm Blue Wedgie - Builders Wedge. Product 40mm 10mm 80mm. Made from high impact resistant polypropylene. Load Bearing Capacity: 2,000kg at 100% overlap, 1,000kg at 35% overlap. Can be used singularly or in combination.
• Delf 15mm Green Builders Wedge - 25 Pack - AUSTRALIA BRAND - 15mm Green Wedgie - Builders Wedge. Product 40mm 15mm 80mm. Made from high impact resistant polypropylene. Load Bearing Capacity: 3,000kg at 100% overlap. 1,400kg at 35% overlap. Can be used singularly or in combination.
• Delf 10mm Orange Builders Wedge - 35 Pack - AUSTRALIA BRAND - 10mm Orange Wedgie - Builders Wedge. Product 40mm 10mm 80mm. Made from high impact resistant polypropylene. Load bearing capacity: 2500kg at 100% overlap, 1250kg at 35% overlap. Can be used singularly or in combination.
• Delf Assorted Builders Wedge - 24 Pack - AUSTRALIA BRAND - Box of assorted "Wedgie" Builders Wedges. High impact resistance and load bearing. Box contains 6 Blue, 6 Orange, 6 Green, 3 Grey and 3 Black wedgies. Assorted Wedgies - Builders Wedges. Can be used singularly or in combination.
• Delf 20mm Grey Builders Wedge - 14 Pack - AUSTRALIA BRAND - 20mm Grey Wedgie - Builders Wedge. Product 40mm 20mm 100mm. Made from high impact resistant polypropylene. Load Bearing Capacity: 2,700kg at 100% overlap. 1,150kg at 35% overlap. Can be used singularly or in combination.
• TACO Marine V12-4155BKA50-1 Flexible Rub Rail Vinyl Insert - 3/4″ X 3/8″ - TACO Marine's V12-4155BKA50-1 Flexible Rub Rail Vinyl Insert is sold in 50' lengths. It is designed for use with flexible rub rails. Its soft PVC insert provides a cushion effect to absorb impact. for use with flexible rub rail.
• Red Head 3/4 in. x 5-1/2 in. WEDGE ANCHOR 10CT - Red Head 3/4 in. WEDGE ANCHOR 10CT. Red Head Wedge anchors are heavy-duty anchors designed for fastening into solid concrete. Steel construction with zinc plating for added durability. Helpful Links.
• 10 pcs POWERS RAWL 3/4" x 8" WEDGE BOLT CONCRETE SCREW ANCHOR ZINC PLATED TAPCON - Powers Rawl. These work like Tapcon anchors, but much heavier duty. They don't "stress" the concrete the way expansion shields and regular wedge anchors do, therefore there is no risk of cracking the concrete.
• Hillman Power Stud 1/2 In. x 3-3/4 In. Zinc-Plated Wedge Anchor (4 QTY) - NEW Hillman Power Stud 1/2 In. x 3-3/4 In. Zinc-Plated Wedge Anchor (4 QTY). Finish: Zinc. Length: 3-3/4 In.
• ( QTY 30 ) 1/2 x 3 Concrete Wedge Anchors Bolts Masonry Sleeve Anchor Zinc - Sleeve anchors are the most versatile masonry expansion anchors because they can be used in. The wedge anchor, drop-in anchor and concrete strike anchor can only be used in solid concrete and have the highest & most consistent holding values in concrete.
• (QTY 30) 1/2 x 2 3/4 Strike Concrete Wedge Anchors Hammer Drive Pin Anchor Bolts - Compression anchors may also be pre-expanded and/or used in conjunction with a drive nail. Strike anchors, also known as hit anchors, are intended for light to heavy-duty applications, anchoring into concrete, brick or block.
• Split Drive Concrete Anchor Zinc Countersunk 1/4 x 2 Hammer Drive Nail-in (400) - · Available in countersunk (CSD) and duplex-head (DSD) styles. The Split-Drive anchor is a one-piece expansion anchor that can be installed in concrete, grout-filled block and stone. (Overhead installation need not be blown clean.).
• ( QTY 50 ) 1/2 x 3 3/4 Concrete Wedge Anchors Bolts Power-Stud Zinc Plated - Wedge Anchor - Power-Stud 1/2” x 3 3/4” Concrete Screw Anchor Zinc Plated Powers Fasteners 50/B.
• 36 Pack Simpson Strong Tie Bolt 2 Wedge Anchors 1/2" X 4-1/4" STB2-504144SS - 1/2" X 4-1/4" 304 STAINLESS STEEL.
• (20-Pk) Simpson Strong-Tie Wedge Anchor 5/8" x 7" STB2-62700 - Box of 20.
• 6.5 in. x 6 Industrial Rubber Wedge - The Industrial Rubber Wedge is excellent for safety when stacking cylindrical objects. The rubber wedge resilience avoids creasing or wrinkling paper as well as scratching or marring surfaces and it increases its grip as weight is increased.
• HILTI Stainless Steel Wedge Anchor Bolt 387528 [Box of 20] NOS
• HILTI KB3-C-SS304 Stainless Steel Expansion Anchor 286044 [Box of 100] NOS
• HILTI Internally Threaded Insert Anchor 258020 [Box of 10] NOS
• HILTI Carbon Steel Internally Threaded Insert Anchors 258021 [Box of 5] NOS
• HILTI KB-TZ 3/4" x 8" Wedge Anchors 2141962 [Box of 10] NOS
• Wedge Anchor 5/8in X 6 in Lg, Stainless Steel . Power-Stud 25 pc - 25 pc DEWALT Wedge Anchor 5/8in X 6 in Lg, Stainless Steel . Power-Stud. Brand new
• RED HEAD 3/8"-Drop In Anchor-Concrete Setting Tools
• Mkt Fastening 2538334 Wedge Anchor,Gr 5,3/8 X3 3/4,Pk50 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 3 3/4 in, Max. Work Thickness 1 3/4 in, Thread Length 2 5/8 in, Thread Size 3/8 In.-16, Min.
• Mkt Fastening 2612512 Wedge Anchor,Zinc Plated,1/2X5 1/2,Pk10 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 1/2 in, Anchor Length 5 1/2 in, Max. Work Thickness 1 in, Thread Length 4 in, Thread Size 1/2 In.-13, Min.
• Dewalt Engineered By Powers Double Shield Expansion Anchors 1/2” 09525-PWR - Dewalt Engineered By Powers Double Shield Expansion Anchors 5/8" 09530-PWR.
• Assorted Size Concrete Wedge Anchors (15) - A package of 4 unopened, 11 loose
• 10 Pack 5/16" X 2-3/4" 316 Stainless Steel Wedge Anchor Silver FREE SHIPPING - High Quality - Made of marine grade 316 stainless steel, this anchor is durable, stable, rust and corrosive resistant. The length is 2-3/4". The thread type is coarse. Widely Usage - With the material, this anchor can be widely used for outside and inside situations.
• (160 anchors) 1/2-13 x 5-1/2" Concrete Wedge Anchor Bolts Hot Dipped Galvanized - 160 1/2-13 x 5-1/2" Concrete Wedge Anchor Bolts Hot Dipped Galvanized. Expedited shipping available, same business day dropped off at carrier
• Uline 4" Concrete Installation Kit H2121 / Concrete Anchor H2121
• ITWBrands Tapcon Concrete Anchors, 1/4” x 2- 3/4” - 150 Ct, w/ 2 Drill Bits
• HILLMAN 1/2" x 6" WEDGE BOLT + ANCHOR / 372176 / 20-Pack - THIS SALE IS FOR.
• 24PK Dewalt Powers Fasteners 1/2" x 3" Carbon Steel Sleeve Expansion Anchors - NEW OPEN BOX 24 PACK 24PK Dewalt Powers Fasteners 1/2" x 3" Carbon Steel Sleeve Expansion Anchors. Sleeve Anchor: Steel, Not Graded, Zinc Plated, 1/2 in Anchor Dia., 3 in Anchor Lg, 24 PK
• (25-Pk) Parawedge Concrete Anchor 1/2" x 4-1/2" - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• 5PK Dewalt Powers 1-1/4" x 9" Expansion Wedge Anchor 7473SD1-PWR, Steel - New open box 5PK Dewalt Powers 1-1/4" x 9" Expansion Wedge Anchor 7473SD1-PWR, Steel. DEWALT Wedge Anchor: Steel, Seismic Approved, Zinc Plated, 1 1/4 in Anchor Dia., Medium Carbon, 5 PK
• 5PK Dewalt 1-1/4" x 9" Expansion Wedge Anchor 7473SD1-PWR, Steel, *INCOMPLETE* - New open box INCOMPLETE.
• (25-Pk) Anchor Zinc Plated 5/8" x 6" CWA5/600Z - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• (25-Pk) Anchor Zinc Plated 5/8" x 6" CA5/8-600Z - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Dewalt Engineered By Powers Double Shield Expansion Anchors 5/8" 09530-PWR - Dewalt Engineered By Powers Double Shield Expansion Anchors 5/8" 09530-PWR.
• (25-Pk) ITW Red Head Trubolt Carbon Wedge Anchor 1/2" x 5-1/2" - We will take care of you!
• New Open Box Hilti KB TZ Stainless Steel 304 Anchors - 1/2” x 7” - 20 Pieces - Hilti Kwik Bolt TZ SS 304 Wedge Anchors - 1/2” x 7” - 20 Pieces - (3875289). OPEN BOX- NEW Stainless Steel 304
• HILTI KWIK CAST 3/8" + 1/2" + 5/8" RED - New - 1Pc - HILTI KWIK CAST 3/8" + 1/2" + 5/8" RED - New - 1Pc.
• 20 Pack Genuine DeWalt 6-1/4" Steel Expansion Wedge Anchor 3/4" Anchor Dia.
• RED HEAD RH50096 Trubolt 1/2-inch x 5 1/2-inch Concrete Wedge Anchor 2-Piece - Trubolt wedge anchors feature a stainless steel expansion clip, threaded stud body, nut and washer. • arsenic and chromium from chemically-treated lumber. •ICC-ES approvals for use in uncracked concrete (ICC-ES ESR-2251).
• RED HEAD RH50094 Trubolt 1/2-inch x 4 1/4-inch Concrete Wedge Anchor 2-Piece - Trubolt wedge anchors feature a stainless steel expansion clip, threaded stud body, nut and washer. • arsenic and chromium from chemically-treated lumber. •ICC-ES approvals for use in uncracked concrete (ICC-ES ESR-2251).
• RED HEAD RH50088 Trubolt 3/8-inch x 3 3/4-inch Concrete Wedge Anchor 2-Piece - Trubolt wedge anchors feature a stainless steel expansion clip, threaded stud body, nut and washer. • arsenic and chromium from chemically-treated lumber. •ICC-ES approvals for use in uncracked concrete (ICC-ES ESR-2251).
• RED HEAD RH50076 Dynabolt 1/2-inch x 3-inch Concrete Sleeve Anchors 5-Piece - Designed for fastening into porous concrete, hollow or grout-filled block and brick. • arsenic and chromium from chemically-treated lumber. • lead from lead-based paints. Your risk from these exposures varies, depending on how often you do this type of work.
• RED HEAD RH50074 Dynabolt 1/2-inch x 2-1/4-inch Concrete Sleeve Anchors 5-Piece - Designed for fastening into porous concrete, hollow or grout-filled block and brick. Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
• RED HEAD RH50072 Dynabolt 3/8-inch x 3-inch Concrete Sleeve Anchors 5-Piece - Designed for fastening into porous concrete, hollow or grout-filled block and brick. Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
• RED HEAD RH50066 Dynabolt 5/16-inch x 1-1/2-inch Concrete Sleeve Anchors 5-Piece - Designed for fastening into porous concrete, hollow or grout-filled block and brick. Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
• RED HEAD 50100 5/8-in x 6-in Hex Nut Expansion Heavy Duty Concrete Wedge Anchor - Red Head wedge anchors are designed for fastening applications in solid concrete. Features a stainless steel expansion clip, threaded stud body, nut and washer. • arsenic and chromium from chemically-treated lumber.
• NEW, ITW Red Head WS-58100 5/8" x 10" Trubolt Carbon Wedge Anchor 10 Per Box - NEW, ITW Red Head WS-58100 5/8" x 10" Trubolt Carbon Wedge Anchor 10 Per Box.
• Dewalt 3/4 in. x 8-1/2 power stud carbon steel expansion anchor- 10 anchors - Dewalt 3/4 in. x 8-1/2 power stud carbon steel expansion anchor- 10 anchors.
• (100) Masterset SLV3-125125 3/8"- 16 thread x 1 1/8"  Drive Pin Anchor - (100) Masterset SLV3-125125 3/8"- 16 thread x 1 1/8" Drive Pin Anchor.
• 3/4” x 5” Concrete Anchor - 3/4” x 5” Concrete Anchor. Threads are 3” in length. The entire anchor is 5” in length.
• 5 Vintage Concrete Anchor Setters Tampin - Various lengths 
• Zoro Select U09150.062.0425 Sleeve Anchor,Hex,Sst,5/8In,4-1/4In,Pk5 - Sleeve Anchor, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 5/8 in, Anchor Length 4 1/4 in, Thread Size 1/2, Min. ZORO SELECT. Zoro Select U01000.043.0800 Grade 5, 7/16"-14 Hex Head Cap Screw, Black Oxide.
• Powers Galvanized Power-Stud, 1/2" x 2-3/4" LT Wedge Anchors, Box of 50 - 50 Total
• Red Head Dynabolt HN-3424 Concrete Sleeve Anchor 3/4" x 2-1/2" (10 Pack)
• Red Head Trubolt WS-3822 Concrete Sleeve Anchor 3/8" x 2-1/4" (50 Pack)
• Mkt Fastening 1705000 Sleeve Anchor, 1/4 X 1-3/8In, Pk50 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 1 3/8 in, Thread Size 3/16-24, Max. Work Thickness 3/8 in, Min. MKT FASTENING. & Recepticles.
• Zoro Select B70420.037.0375 Wedge Anchor,Ss,303 And 304,Plain,Pk190 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 3 3/4 in, Max. Work Thickness 1 1/8 in, Thread Length 2 1/4 in, Thread Size 3/8 In.-16, Min.
• Mkt Fastening 2678800 Wedge Anchor,Zinc Plated,7/8X8,Pk4 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 7/8 in, Anchor Length 8 in, Max. Work Thickness 4 in, Thread Length 4 in, Thread Size 7/8 In.-9, Min.
• RED HEAD 50120 5/8-in x 6-in Zinc-Plated Steel Hex Head Concrete Sleeve Anchor - • arsenic and chromium from chemically-treated lumber. •Designed for fastening into porous concrete, hollow or grout-filled block and brick. •Fastening Base Material: Brick, Cinder Block, Concrete. •Anchor Length (in.).
• RED HEAD 50097 1/2-in x 5-1/2-in Heavy Duty Concrete Wedge Anchor 3-Pack - The Red Head 1/2 in. Zinc-Plated Steel Hex-Nut Head Wedge Anchor for Solid Concrete is an excellent choice for fastening in solid concrete and other fastening applications. The anchor resists corrosion and has a stainless-steel, 1-piece clip.
• RED HEAD 50096 1/2-inch x 4-1/4-inch Heavy Duty Concrete Wedge Anchor 3-Pack - • arsenic and chromium from chemically-treated lumber. The Red Head 1/2 in. x 4-1/4 in. •Ideal for fastening into solid concrete. •Type: Wedge. • lead from lead-based paints. Your risk from these exposures varies, depending on how often you do this type of work.
• RED HEAD 50126 1/2-in x 2-in Drop-In Concentrate Steel Anchor Set of 5 - The Red Head 1/2 in. Steel Concrete Drop-In Anchor is designed for overhead fastening applications into solid concrete. The anchor is crafted with steel for strength and can be installed below concrete surfaces.
• RED HEAD 50116 1/2-in x 2-1/4-in Steel Concrete Sleeve Anchor Set of 5 - •RED HEAD 50116 1/2-in x 2-1/4-in Zinc-Plated Steel Concrete Anchor Set of 5 RH-50116-B5. The Red Head 1/2 in. Zinc-Plated Steel Hex Nut-Head Indoor Sleeve Anchor is designed for concrete, block and brick fastening applications.
• RED HEAD 50117 1/2-inch x 3-inch Concrete Steel Sleeve Anchor Set of 5 - •Designed for fastening into porous concrete, hollow or grout-filled block and brick. Use the contractor-grade Red Head 1/2 in. The anchor is designed with a pre-assembled nut and washer. Nut and washer are pre-assembled.
• RED HEAD 50112 5/16-in x 1-1/2-in Zinc-Plated Steel Concrete Sleeve Anchor - • arsenic and chromium from chemically-treated lumber. The Red Head 5/16 in. Zinc-Plated Steel Hex-Head Sleeve Anchor is designed for fastening applications in concrete, hollow/grout-filled block and brick.
• RED HEAD 50090 1/4-inch x 2-1/4-inch Heavy Duty Concrete Wedge Anchor Set of 10 - • arsenic and chromium from chemically-treated lumber. This product is designed for fastening applications in solid concrete. It features a versatile fully threaded design and a corrosion resistant one-piece stainless-steel clip.
• RED HEAD 50118-B3 1/2-inch x 4-inch Steel Concrete Sleeve Anchor Set of 3 - The Red Head 1/2 in. Steel Hex-Head Indoor Sleeve Anchor is designed for fastening applications in porous concrete, block or brick. This contractor grade anchor is an excellent choice for fastening cabinets, shelves, pipe fittings and more to brick and porous concrete.
• RED HEAD 50125 3/8-Inch x 1-5/8-Inch Steel Concrete Drop-In Anchor Set of 5 - Use the Red Head 3/8 in. Zinc-Plated Steel Drop-In Anchor for overhead fastening in solid concrete. The anchor features steel construction and is ideal for use with threaded-rod applications. 4-way slot for dependable anchor expansion.
• 3/4" x 5-1/2" Masonry Sleeve Anchors 5 pcs. Made in the USA New - 3/4" x 5-1/2" Masonry Sleeve Anchors 5 pcs. Made in the USA New. Type: Sleeve Anchor, Masonry. Style: Hex Nut. Material Steel, Zinc Plated, Low Carbon. Quantity: 5 Pcs. Our Ref: T-Box 031023, 03-09-23, Rear PR Anchor Area.
• 100 PIECE - HILTI Anchor Concrete Floor Stud w/Shot 1/4" 1/4"X3/4" 402807
• 10 PIECE - HILTI Anchor Concrete Floor Stud w/Shot 1/4" 1/4"X3/4" 402807
• 100 PIECE - HILTI Anchor Concrete Floor Stud w/Shot 1/4" 1/4"X3/8" 147176
• 10 PIECE - HILTI Anchor Concrete Floor Stud w/Shot 1/4" 1/4"X3/8" 147176
• Hilti Kwik Bolt II Concrete Anchor 50 Pk
• RED HEAD 50301 1/2-inch x 5-1/2-inch Steel Heavy-Duty Concrete Wedge Anchor - •Use hot-dipped galvanized wedge anchors for treated lumber applications. • arsenic and chromium from chemically-treated lumber. Steel construction. Features a fully threaded design. •Ideal for fastening into solid concrete.
• RED HEAD 35305 1/4-in x 2-in Hammer-Set Nail Drive Concrete Anchors 50-Pack - • arsenic and chromium from chemically-treated lumber. •Works in concrete, block and brick. •Fastening Base Material: Brick, Cinder Block, Concrete. Your risk from these exposures varies, depending on how often you do this type of work.
• RED HEAD 35303 1/4-in x 1-1/2-in Hammer-Set Nail Drive Concrete Anchors 50-Pack - • arsenic and chromium from chemically-treated lumber. •Works in concrete, block and brick. •Fastening Base Material: Brick, Cinder Block, Concrete. Your risk from these exposures varies, depending on how often you do this type of work.
• RED HEAD 35300 1/4-in x 1-in Hammer-Set Nail Drive Concrete Anchors 75-Pack - • arsenic and chromium from chemically-treated lumber. •Works in concrete, block and brick. •Fastening Base Material: Brick, Cinder Block, Concrete. Your risk from these exposures varies, depending on how often you do this type of work.
• RED HEAD 11021 1/2-inch x 5-1/2-inch Galvanized Concrete Wedge Anchors 10-Pack - Red Head 1/2 in. x 5-1/2 in. Fully threaded design accommodates fixtures of various thickness. •Use hot-dipped galvanized wedge anchors for treated lumber applications. •Hot-dipped galvanized finish resists corrosion.
• RED HEAD 11285 1/2-in x 4-in Steel Hex-Head Concrete Sleeve Anchors 25-Pack - The Red Head 1/2 in. Nut and washer preassembled. Building code approved. •Designed for fastening into porous concrete, hollow or grout-filled block and brick. • arsenic and chromium from chemically-treated lumber.
• RED HEAD 11283 1/2-inch x 3-inch Steel Concrete Sleeve Anchors 25-Pack - Red Head 1/2 in. These contractor grade anchors are ideal for attaching hand rails, pipe supports, shelves and more. They are made with steel to ensure strength and feature zinc plating for added durability.
• RED HEAD 11281 3/8-in x 3-in Steel Hex Head Concrete Sleeve Anchors 50-Pack - Red Head 3/8 in. Red Head Sleeve Anchors are contractor grade and building code approved. •Designed for fastening into porous concrete, hollow or grout-filled block and brick. • arsenic and chromium from chemically-treated lumber.
• 1/2”-13 x 3-3/4” Concrete Masonry Wedge Anchors Zinc Plated New 250 Pcs - Style: Wedge Anchor. Material: Steel, Zinc Plated. All prices are in U.S. funds. Size: 1/2”-13 x 3-3/4”.
• 3 Boxes Heavy Duty Concrete Sleeve Anchors 5/8x2-1/2" & Wedge Anchors 3/8x2-1/8" - 3 Boxes of Heavy Duty Concrete Sleeve Anchors & Wedge Anchors. This is 2 boxes of 5 each 5/8" x 2-1/2" Hex Head Sleeve Anchors and 1 box of 10 Wedge Anchors 3/8" x 2-1/8".
• 1/2”-13 x 3-3/4” Concrete Masonry Wedge Anchors Zinc Plated New 100 Pcs - Style: Wedge Anchor. Material: Steel, Zinc Plated. All prices are in U.S. funds. Size: 1/2”-13 x 3-3/4”.
• HIlti 3/4" x 4¾" LT 4 pcs KB3 Plated Anchor
• HIlti 3/4" x 5½" LT 3 pcs KB3 Plated Anchor - All information I have about this listing is above and in the pictures.
• HIlti ½" x 4-½" LT 25 pcs (Factory-Packed Box) KB3 #282527 Plated Anchor - If you buy six boxes, you will get the factory box for six boxes of 25 anchors=150 anchors total. The box of 150 anchors weighs 40 lbs.
• Fastway Fasteners Threaded Stud Drive Pins 1/4 Thread, 3/4 Shank & More Qty 113 - Fastway Fasteners Threaded Stud Drive Pins 1/4 Thread, 3/4 Shank & More Quantity 113. Fastway Fastener No. XT-75, 1/4” Thread Diameter, 3/4 Shank Lenth Overall Size 1 1/4”, Qty (50). Fastway Fasteners 1/4” thread diameter, 3/4” Shank Length, overall size 2” qty (51). (12) pack of size 42 C fasteners AT-7887 Ramsey Fastening system. 12 pack bag has dust. 1 threaded stud doesn’t have O-ring/seal as shown in pictures. Sold as is
• HIlti 3/4" x 4-3/4" LT 10 pcs (Factory-Packed Box) KB3 #282535 Plated Anchor - The box of 80 anchors weighs 60lbs.
• RED HEAD 11273 1/2-in x 5-1/2-in Steel Hex-Nut Concrete Wedge Anchors 25-Pack - Red Head 1/2 in. • arsenic and chromium from chemically-treated lumber. •Ideal for fastening into solid concrete. •Type: Wedge. •Steel construction with zinc plating for added durability. •Manufacturer Color/Finish: Zinc Plated.
• RED HEAD 11272 1/2-in x 4-1/4-in Steel Hex-Head Concrete Wedge Anchors 25-Pack - The Red Head 1/2 in. The anchors resist corrosion. 1-piece stainless-steel clip. Includes 25 wedge anchors. • arsenic and chromium from chemically-treated lumber. •Ideal for fastening into solid concrete.
• RED HEAD 11270 3/8-in x 3-3/4-in Steel Zinc-Plated Concrete Wedge Anchor 50-Pack - Corrosion resistant, one piece stainless steel expander clip. Supplied complete with nut and washer. Use hot dipped galvanized wedge anchors for treated lumber applications. • arsenic and chromium from chemically-treated lumber.
• RED HEAD 02014 3/8-inch x 3-inch Heavy Duty Concrete Wedge Anchors 50-Pack - Use the Red Head 3/8 in. These fasteners provide heavy-duty support and are corrosion resistant. • arsenic and chromium from chemically-treated lumber. •Type: Wedge. • lead from lead-based paints.
• RED HEAD 50092 3/8-inch x 3-inch Steel Concrete Wedge Anchor Set of 3 - Red Head Wedge anchors are heavy-duty anchors designed for fastening into solid concrete. Corrosion resistant, one piece stainless steel clip. Building code approved. • arsenic and chromium from chemically-treated lumber.
• RED HEAD 50093 3/8-in x 3-3/4-in Steel Concrete Wedge Anchors Set of 6 - •RED HEAD 50093 3/8-in x 3-3/4-in Steel Concrete Wedge Anchors Set of 6 RH-50093-B6. The Red Head 3/8 in. It is also corrosion resistant. Corrosion resistant. Building code approved. • arsenic and chromium from chemically-treated lumber.
• RED HEAD 50115 3/8-in x 3-in Steel Hex Head Concrete Sleeve Anchor Set of 5 - The Red Head 3/8 in. The nut and washer are preassembled. •Designed for fastening into porous concrete, hollow or grout-filled block and brick. • arsenic and chromium from chemically-treated lumber.
• RED HEAD 50114 3/8-in x 1-7/8-in Steel Hex Head Concrete Sleeve Anchor Set of 3 - This durable Red Head 3/8 in. Zinc-Plated Steel Hex-Head Sleeve Anchor is designed for fastening projects in porous concrete, hollow or grout-filled block, and brick. Red Head Sleeve Anchors are contractor grade and building code approved.
• RED HEAD 35220 #8 x 3/8-in x 1-1/4-in Poly-Set Drop-in Concrete Anchors 25-Pack - Use Red Head 1-1/4 in. Easy installation. • arsenic and chromium from chemically-treated lumber. •Use with drywall, hollow block, brick and concrete. Your risk from these exposures varies, depending on how often you do this type of work.
• RED HEAD 35225 #12 x 1-1/2-in x 1-7/16-in Poly-Set Plastic Anchors 20-Pack - The Red Head #12 x 1-1/2 in. Easy installation. •Light-duty anchors for fastening into drywall, hollow block, brick or concrete. • arsenic and chromium from chemically-treated lumber. •Finish Family: Zinc.
• ANCHOR BOLT .625-11NCX10.5in L 316 S/S ASSEMBLY W/ NUTS Lot of 2
• (QTY: 16) 3/8" x 3" Wedge Anchors **FREE SHIPPING** - (QTY: 16) 3/8" x 3" Wedge Anchors **FREE SHIPPING**. E50-13
• (QTY: 9) Cully 62468J, 1/2" x 4-1/4" Wedge Anchors Heavy Duty **FREE SHIPPING** - (QTY: 9) Cully 62468J, 1/2" x 4-1/4" Wedge Anchors Heavy Duty **FREE SHIPPING**. E50-14
• (QTY: 43) Cully 62052J, 1/4" x 3-1/4" Wedge Anchors **FREE SHIPPING** - (QTY: 43) Cully 62052J, 1/4" x 3-1/4" Wedge Anchors **FREE SHIPPING**. E50-16
• (QTY: 11) Cully 62444J, 1/2" x 2-3/4" Wedge Anchors **FREE SHIPPING** - (QTY: 11) Cully 62444J, 1/2" x 2-3/4" Wedge Anchors **FREE SHIPPING**. E50-4
• (QTY: 24) Cully 62029J, 1/4" x 2-1/4" Acoustical Wedge Anchors **FREE SHIPPING** - (QTY: 24) Cully 62029J, 1/4" x 2-1/4" Acoustical Wedge Anchors **FREE SHIPPING**. E50-9
• ITW Red Head LDT-3830 Large Diameter Tapcon 3/8-Inch by 3-Inch Anchor 50 per Box - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• The Hillman Group 370986 Wedge Anchor 3/8 X 5-Inch 10-Pack - Building code approved. It is building code approved, and can also be used with treated lumber. Zinc-plated wedge anchors designed for consistent performance in cracked and un-cracked concrete. Anchor can be installed through standard fixture holes.
• The Hillman Group 371947 Wedge Anchor 5/8 X 4-1/2-Inch 10-Pack - For use in concrete, stone, brick, and Block. Exact hole depth is required. It is building code approved, and can also be used with treated lumber. Power Fasteners Power Stud Anchor; Steel/zinc-plated; For Use In Concrete, Stone, Brick, And Block.
• The Hillman Group 370989 Wedge Anchor 1/2 X 4-1/2-Inch 10-Pack - Model Number: 370989. For use in concrete, stone, brick, and Block. Exact hole depth is required. It is building code approved, and can also be used with treated lumber. --- If the item cannot use or you received your item not as expected.
• 25 RAWL-BOLT™ 1/2" x 4-3/4" CONCRETE EXPANDING WEDGE SLEEVE HEX HEAD BOLT ANCHOR
• Red Head LDT-3444 Large Diameter Tapcon 3/4-Inch by 4-1/2-Inch Anchor 10 per Box - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• ITW redhead concrete anchors dynabolt 1/2x2-1/4” HN-1222 - ITW redhead concrete anchors dynabolt 1/2x2-1/4” HN-1222.
• NIB Powers Power Stud Concrete Install Kit End of Rack Protectors 3/4" Powers - Powers Concrete Install Kit For End of Rack Protectors 3/4" Powers. This item is new in the factory box. Box is worn and dirty from storage. Box contains 4 anchors.
• The Hillman Group 370988 Wedge Anchor 1/2 X 3-3/4-Inch 12-Pack - Building code approved. It is building code approved, and can also be used with treated lumber. Zinc-plated wedge anchors designed for consistent performance in cracked and un-cracked concrete. Anchor can be installed through standard fixture holes.
• M20 Concrete anchor bolt -10 Pack - M20 Concrete anchor bolt -(10 pack)Brand new, never used. 7 and 3/4 inch long. 3/4 inch wide. Some by Hilti brand, and some I have no idea the manufacturer. I have over 100 of these anchor bolts. Message me for a bulk order with discount for large order. These are sitting at my shop right now and didn’t use them for a project I thought I was going to do.
• 10 -Anchors 7/8” by 6” wedge anchor Listing Is For 10 -With Washers And Nuts - 10 -Anchors 7/8” by 6” wedge anchor Listing Is For 10 -With Washers And Nuts.
• The Hillman Group 371946 Wedge Anchor 5/8 X 3-1/2-Inch 10-Pack - Building code approved. It is building code approved, and can also be used with treated lumber. Zinc-plated wedge anchors designed for consistent performance in cracked and un-cracked concrete. Anchor can be installed through standard fixture holes.
• 7/8 by 6 wedge anchor concrete cement Listing Is For 5 Anchor Washer And Nut - 7/8 by 6 inch long wedge anchor concrete cement. With washer and nutListing is for 5 anchor with washer and nutWill combine shipping actual cost
• Cobra Parawedge Concrete Anchors - 1/2" x 7" (25PK)
• 25 PK Powers Double Expansion Anchors 5/8" 09530 - 25 PK Powers Double Expansion Anchors 5/8" 09530. Item is new, 25 anchors. Ships in additional box. 
• (QTY 100)1/4 x 1 3/4 Strike Concrete Wedge Anchors Hammer Drive Pin Anchor Bolts - Compression anchors may also be pre-expanded and/or used in conjunction with a drive nail. Strike anchors, also known as hit anchors, are intended for light to heavy-duty applications, anchoring into concrete, brick or block.
• (QTY 20) 3/8 x 3 1/2 Strike Concrete Wedge Anchors Hammer Drive Pin Anchor Bolts - Compression anchors may also be pre-expanded and/or used in conjunction with a drive nail. Strike anchors, also known as hit anchors, are intended for light to heavy-duty applications, anchoring into concrete, brick or block.
• (QTY 100)1/4 x 2 3/8 Strike Concrete Wedge Anchors Hammer Drive Pin Anchor Bolts - Compression anchors may also be pre-expanded and/or used in conjunction with a drive nail. Strike anchors, also known as hit anchors, are intended for light to heavy-duty applications, anchoring into concrete, brick or block.
• (20) Concrete Wedge Anchor Bolts 1/2 x 4-1/4 Includes Nuts & Washers - Lot of (20) wedge anchor bolts. Nuts and flat washers are included. Item weight: 5 Lbs.
• (QTY 50) 1/4 x 1 3/4 Strike Concrete Wedge Anchors Hammer Drive Pin Anchor Bolts - Compression anchors may also be pre-expanded and/or used in conjunction with a drive nail. Strike anchors, also known as hit anchors, are intended for light to heavy-duty applications, anchoring into concrete, brick or block.
• Split Drive Concrete Anchor Zinc 1/4 x 2-1/2 Mushroom Hammer Drive Nail-in 100 - The Split-Drive anchor is a one-piece expansion anchor that can be installed in concrete, grout-filled block and stone. (Overhead installation need not be blown clean.). Position fixture and insert split-drive anchor through fixture hole.
• ( QTY 10 ) 5/8 x 4 Strike Concrete Wedge Anchors Hammer Drive Pin Anchor Bolts - Compression anchors may also be pre-expanded and/or used in conjunction with a drive nail. Strike anchors, also known as hit anchors, are intended for light to heavy-duty applications, anchoring into concrete, brick or block.
• Split Drive Concrete Anchor Zinc Countersunk 1/4 x 2 Hammer Drive Nail-in (100) - · Available in countersunk (CSD) and duplex-head (DSD) styles. The Split-Drive anchor is a one-piece expansion anchor that can be installed in concrete, grout-filled block and stone. (Overhead installation need not be blown clean.).
• (QTY 48) 3/8 x 2 1/4 Concrete Wedge Anchors Bolts Masonry Expansion Anchor Zinc - A non-bottom-bearing, wedge-style expansion anchor for use in solid concrete or grout-filled masonry. The Wedge-All. Threaded studs are set by tightening the nut to the specified torque. The Wedge-All is code listed for grout-filled masonry applications.
• 5/16 x 2 1/2 Concrete Sleeve Wedge Bolt Anchors Masonry Sleeve Anchor Zinc (50) - Sleeve anchors are the most versatile masonry expansion anchors because they can be used in. The wedge anchor, drop-in anchor and concrete strike anchor can only be used in solid concrete and have the highest & most consistent holding values in concrete.
• (QTY 10) 5/8 x 4 3/4 Strike Concrete Wedge Anchors Hammer Drive Pin Anchor Bolts - Compression anchors may also be pre-expanded and/or used in conjunction with a drive nail. Strike anchors, also known as hit anchors, are intended for light to heavy-duty applications, anchoring into concrete, brick or block.
• 5/16 x 2 1/2 Concrete Sleeve Wedge Bolt Anchors Masonry Sleeve Anchor Zinc (200) - Sleeve anchors are the most versatile masonry expansion anchors because they can be used in. The wedge anchor, drop-in anchor and concrete strike anchor can only be used in solid concrete and have the highest & most consistent holding values in concrete.
• Dewalt Power Stud 7432Sd1 Carbon Steel Wedge Expansion Anchor 5/8" X 4 1/2" 24Pk
• DEWALT Wedge Anchor Steel 3/8” Anchor 7415SD2-PWR 50 Pack - DEWALT Wedge Anchor: Steel, Seismic Approved, Zinc Plated, 3/8 in Anchor Dia., Medium Carbon, 50 PK
• Red Head RM-14 1/4-Inch Multi-Set Drop-In Anchor (100 per Box) - These anchors allow for easy installation and easy inspection. These drop-in anchors are typically used for solid concrete or lightweight fill decks. Internally Threaded, All Steel Shell. We take our reputation seriously.
• Red Head LDT-1240 Large Diameter Tapcon 1/2-Inch by 4-Inch Anchor (25 per Box) - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• Red Head LDT-5850 Large Diameter Tapcon 5/8-Inch by 5-Inch Anchor (10 per Box) - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• Red Head LDT-1250 Large Diameter Tapcon 1/2-Inch by 5-Inch Anchor (25 per Box) - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• Red Head LDT-3840 Large Diameter Tapcon 3/8-Inch by 4-Inch Anchor (50 per Box) - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• DEWALT 3/4 In. x 12 In. Power-Stud Carbon Steel Wedge Expansion Anchor 7451SD1 - The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included. DEWALT 3/4 In. Power-Stud Carbon Steel Wedge Expansion Anchor - 10 Anchors.
• 3/8 x 3.75" Hilti Kwik 3 Wedge Expansion Anchor KB3 SS304 #282555 50pc - New OB - This item was recovered from a lost freight sale.
• (130-Pk) Confast Concrete Wedge Anchor For Fastening System 3/8" x 3-1/2" - We will take care of you!
• lot of (600). Power Fast, Power-Stud+SD1, 7402SD1 , Concrete Anchor Bolts , - lot of (600). Power Fast, Power-Stud+SD1, 7402SD1 , Concrete Anchor,.
• 100 PIECE - HILTI Kwik Bolt 3 - 1/4 X 3 1/4 304 Stainless Long Thread PN: 282541
• 10 Hillman 3/8" Lag Bolt Shields 2.5” Concrete Anchors 5/8" Drill 370193 Anclaje - 10 Hillman 3/8" Lag Bolt Shields 2.5” Concrete Anchors 5/8" Drill 370193 Anclaje. Lot of 10 in sealed package. 1 package was opened for photo purposes. BigreenLtop
• Dewalt Hangermate Wood Rod Hanger Anchor 2 Shank PFM2251100 - Dewalt Hangermate Wood Rod Hanger Anchor 2 Shank PFM2251100.
• Lot Of 27 Assorted Concrete Wedge & Sleeve Anchor Bolts - Up for sale is a Lot of 27 Concrete Anchor Bolts.
• 5/16" x 2 1/2" Sleeve Anchor Hex Nut Low Carbon Steel Zinc Plated - Fastener Type: Sleeve Anchor Hex Nut. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Drive Type: External Hex. Finish: Zinc Plated. Material: Low Carbon Steel. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 1"-8 x 6" Coarse Thread Wedge Anchor Low Carbon Steel Zinc Plated - Thread Pitch Type: Coarse. Fastener Type: Wedge Anchor. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• (19-Pk) Red Head Hex-Head Sleeve Anchors Steel 1/2" x 4" 11285 - (19-Pk) Red Head Hex-Head Sleeve Anchors Steel 1/2" x 4" 11285.
• Concrete Anchors - 1/2" x 7" Cobra 504z Parawedge - 10 Pack - Concrete Anchors - 1/2" x 7" Cobra 5047 Parawedge - 8 Pack.
• (100) Mushroom Head 1/4" x 1" Hammer Drive Pin Masonry Anchors - (100) Mushroom Head 1/4" x 1" Hammer Drive Pin Masonry Anchors. They will be shipped in a USPS small flat rate box, (not in the box shown in the pictures). 
• (100) Mushroom Head 1/4" x 2" Hammer Drive Pin Masonry Anchors - (100) Mushroom Head 1/4" x 2" Hammer Drive Pin Masonry Anchors. They will be shipped in a USPS small flat rate box, (not in the box shown in the pictures). 
• (100) Mushroom Head 1/4" x 1-1/2" Hammer Drive Pin Masonry Anchors - (100) Mushroom Head 1/4" x 1-1/2" Hammer Drive Pin Masonry Anchors. They will be shipped in a USPS small flat rate box, (not in the box shown in the pictures). 
• ERICO Drive Pins 8 MM X 3/4 PDH19
• Hilti KWIK Bolt TZ Expansion Anchor Carbon Steel KB-TZ 1/2" x 5-1/2" New Box! - Hilti KWIK Bolt TZ Expansion Anchor Carbon Steel KB-TZ 1/2" x 5-1/2" New Box!.
• Hilti Kwik Bolt II Concrete Stud Anchor Bolt 1/2" x 2-3/4" Box of 37 - Hilti Kwik Bolt II Concrete Stud Wedge Anchor Bolt 1/2" x 2-3/4" Box of 37.
• (50)NOS,HILTI 3/8" x 7" KWIK BOLT II ANCHOR SET KB II 00242538 Anchor Bolts.
• 25 New old stock Rawlplug Scru-Leads lead concrete screw anchors #16-18x1 1/2". - Vintage Rawl USA.
• 25 New old stock Star Lead Concrete Anchors for Wood Screws #16-18 x 1 1/2". - Vintage New Old Stock.
• Red Head HN-5822 Dynabolt Hex Nut 5/8-Inch by 2-1/4 Inch Sleeve Anchor 25 Box - Red Head HN-5822 Dynabolt Hex Nut 5/8-Inch by 2-1/4 Inch Sleeve Anchor 25 Box. New, Old stock Fast shipping Most orders go out next day
• Zoro Select B70420.031.0350 Wedge Anchor,Ss,303 And 304,Plain,Pk275 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 5/16 in, Anchor Length 3 1/2 in, Max. Work Thickness 1 1/8 in, Thread Length 2 1/4 in, Thread Size 5/16 in, Min.
• Zoro Select B70420.025.0225 Wedge Anchor,Ss,303 And 304,Plain,Pk650 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 1/4 in, Anchor Length 2 1/4 in, Max. Work Thickness 3/8 in, Thread Length 1 1/8 in, Thread Size 1/2 In.-13, Min.
• Zoro Select B70420.062.0600 Wedge Anchor,Ss,303 And 304,Plain,Pk42 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 5/8 in, Anchor Length 6 in, Max. Work Thickness 2 in, Thread Length 4 13/16 in, Thread Size 5/8 In.-11, Min.
• Extreme Max 3006.6557 BoatTector Vinyl-Coated River Anchor - 18 lbs. - River anchors are intended for use in lakes and rivers with strong currents or drifts. The design uses a combination of weight and flukes for a firm hold, even in windy conditions. The large flukes hold well in muddy, rocky, or weed/grass bottoms.
• Extreme Max 3006.6527 BoatTector Vinyl-Coated Navy Anchor - 20 lbs. - BoatTector Inflatable Fenders. Protect your boat without putting a dent in your wallet! All BoatTector line and cordage products are designed for optimal utility and durability. From economical MFP lines to premium double-braid nylon lines, each length of rope is designed for its purpose, be it as a dock line, fender line, or anchor line.
• 30 POWERS FASTENERS POWER-STUD WEDGE ANCHOR 5/8" x 4-1/2” Includes Nuts & Washe - Qty 30 POWERS FASTENERS POWER-STUD WEDGE ANCHOR 5/8" x 4-1/2”. Qty 30 Nuts 5/8 11 Qty 30 5/8 x11/2 Washers Qty 30 5/8 x 2 Washers.
• Red Head WS-3826 3/8" x 2-3/4" Concrete Wedge Anchors (10 pcs) Steel Zinc Plated - !!!! IMPORTANT NOTE:  See photos for condition!!!!!  Old stock.  Some items have light surface corrosion!!!!!   Original carboard packaging not included with shipment and is only shown in the photo for confirmation of the part number.
• Red Head WS-3826 3/8" x 2-3/4" Concrete Wedge Anchors (50 pcs) Steel Zinc Plated - !!!! IMPORTANT NOTE:  See photos for condition!!!!!  Old stock.  Some items have light surface corrosion!!!!!   Original carboard packaging not included with shipment and is only shown in the photo for confirmation of the part number.
• Red Head WS-3826 3/8" x 2-3/4" Concrete Wedge Anchors (50 pcs) Steel Zinc Plated - !!!! IMPORTANT NOTE:  See photos for condition!!!!!  Old stock.  Some items have some surface rust / corrosion!!!!!   Original carboard packaging not included with shipment and is only shown in the photo for confirmation of the part number.
• Red Head WS-3446 3/4" x 4-3/4" Concrete Wedge Anchors (Lot of 2) Steel Zinc Plat - Red Head WS-3446 3/4" x 4-3/4" Concrete Wedge Anchors (Lot of 2) Steel with Zinc Plating.  Original carboard packaging not included with shipment and is only shown in the photo for confirmation of the part number.
• Red Head WS-3446 3/4" x 4-3/4" Concrete Wedge Anchors (10 Count) Steel Zinc Plat - Red Head WS-3446 3/4" x 4-3/4" Concrete Wedge Anchors (10 Count) Steel with Zinc Plating.  Original carboard packaging not included with shipment and is only shown in the photo for confirmation of the part number.
• SIMPSON SLEEVE-ALL HEX HD ANCHORS 5/8" X 3" box of 20 #SL62300H Same Day Ship - Our buying mistake is your gain.
• POWERS SLEEVE-ALL HEX HD ANCHORS 3/4" X 4 1/4" box of 10 #05055S Same Day Ship - Overstock from a job. Our buying mistake is your gain. Ship same day as payment.
• DeWalt 6306SD-PWR Drop-In Zinc Anchor 3/8"-16 Anchor Thread Size, 1/2" Diameter - Allowable Shear (Lbs.). Anchor Thread Size: 3/8"-16. The Smart DI+ is an all-steel, machine bolt anchor available in carbon steel. It can be used in solid concrete, hard stone, and solid block base materials.
• (25-Pk) Coarse Thread TorqueMaster Wedge Anchor Bolts 1/2"-13 x 4-1/4" 51804 - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
• 15 pcs. HILTI KB-TZ 5/8"x6" Anchor Bolt w/ Washer &Nut (NEW). - HILTI KB-TZ 5/8"x6" anchor Bolt w / Washer & Nut. Price for 15 pcs.
• HILTI HSL-3 M24/30 Expansion Anchor (NEW).
• 18PK DEWALT Wedge Anchor 3/4 in Dia. x 5 1/2 in Carbon Steel, Galvanized 7742HD5 - 18 PACK NEW WITHOUT ORIGINAL PACKAGING 18PK DEWALT Wedge Anchor 3/4 in Dia. x 5 1/2 in Carbon Steel, Galvanized 7742HD5. DEWALT Wedge Anchor: Carbon Steel, Galvanized, 3/4 in Anchor Dia., 5 1/2 in Anchor Lg
• 5/16"-18 x 3 1/2" Zinc Concrete Wedge Stud Anchor Bolts WAS-300 (50 pcs.) - 5/16"x 18 3 1/2 " Zinc Concrete Wedge Stud Anchor Bolts WAS-300 (50 pcs.). **shipped without box shown in pictures above**5/16"-18 x 3 1/2"
• POWERS WEDGE-BOLT HEAVY DUTY CONCRETE ANCHOR 3/4" x 8" 8pc LDT H #372194 Hillman - This box has 8 pieces anchors.
• Set of 4 3/8" x 5" wedge anchors for use with Floor Makiwara - Set of 4 wedge anchors for the Floor Makiwara.
• (200) Mushroom Head 1/4 x 3/4 Hammer Drive Pin Anchors Nail-In Hammer-In Rivet - These zinc alloy anchors are designed for a 1/4" drill hole and are 3/4" in length with a zinc plated steel pin. Lot of (200) pin anchors.
• 1/4 In. X 2 In. Flat Phillips Head Sleeve Anchors Stainless Steel (30-Pack) - 1/4 In. X 2 In. Flat Phillips Head  Sleeve Anchors Stainless Steel (30-Pack)                                                                        (S)
• Hilti Galvanized Concrete Wedge Anchor 1/2" X 7" 2pcs - Hilti  Galvanized Concrete Wedge Anchor 1/2" X 7"  2pcs                                                                                                         (S)
• HILTI 3/4" X 6 1/2” Concrete Wedge Anchor Bolt - HILTI   3/4" X  6 1/2” Concrete Wedge Anchor Bolt                                                                                                                                (S)
• HILTI 3/4" X 7” Concrete Wedge Anchor Bolt - HILTI   3/4" X  7” Concrete Wedge Anchor Bolt                                                                                                                                (S)
• 125 pcs RED HEAD 1/2" x 3-3/4" Trubolt Wedge Concrete Anchors Incomplete READ - They are the genuine product. These are not complete sets, but they are the genuine product. This is all I have left, moving them in a lot.
• Red Head WS-1236 1/2" x 3-3/4" Concrete Wedge Anchors (25 Count)
• Campbell Sleeve Plated Steel 4-48/64" x 4" SPS400448 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Campbell Sleeve Plated Steel 3-44/64 x 3"Hole Size SPS300344 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• DeWalt Drop-In Anchor Zinc Plated 5/8"-11 x 2-1/2" DEW06320 - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
• Powers Fasteners Wedge Expansion Anchor Carbon Steel Zinc Plated 7/8" x 6" - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Hilti Wedge & Sleeve Anchors Stainless Steel 316 3/4"-10 x 5" KB-T22 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• 10 PCS 3/4"-10 X 6 1/4" Wedge Anchors, 304 Stainless Steel
• Drop-In Anchor 5/8"-11 x 2-1/2" - Drop-In Anchor 5/8"-11 x 2-1/2". We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
• Hangermate Threaded Vertical Rod Anchor 3/8"-16 for Concrete - We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Cabur gp100 - gpm.95/bb through clamp
• Wej-It Ankr-Tite Wedge Anchor Zinc Plated ATG1012 Hot Dipped Galvanized SINGLE - Wedge anchor. There is only 1 anchor included per order.
• Hilti KH- EZ 1/4 X 6 1/2" (10pc) - Hilti KH- EZ 1/4 X 6  1/2"  (10pc)
• Red Head Hex Sleeve Anchor 5/16" x 2-1/2" T9FB366072 - We will take care of you!
• Car Bushing Rubber Sleeve Disassembly Tool Rear Axle Iron Cover Dismantle
• 3/8 Toggle Head anchors head only 50 pack 3025-00600 7/8" drill - see pictures, lot of 50 anchors head only and one bolt
• ini moni 1/2" x 7" Concrete Anchor Stainless Steel Heavy Duty Wedge Anchor fo... - 【Fastener for Concrete】: Concrete wedge anchor is only suitable for concrete, not for blocks or brick substrates, etc. It is very convenient for you to carry and easy to install. Whether you are securing a safe to concrete in your garage or attaching a boat lift to a seawall, you can count on Concrete Wedge Anchors to hold tight.
• Cobra Parawedge Concrete Anchor w/ Nuts & Washers 3/8" x 3" 496NS - Cobra Parawedge Concrete Anchor w/ Nuts & Washers 3/8" x 3" 496NS. New in damaged packagingSee all picturesThank you
• HILTI #282505 KB3 3/8 x 2-1/4" Wedge Anchors, Box of 50 pcs for Masonry/Concrete - KB3 3/8 x 2 1/4". 49 anchor rods. New condition in open box. 42 washers.
• 1/2" x 5-1/2" Red Head / Trubolt Concrete Anchors 2 boxs of 25 quantity 50 lot - 1/2" x 5-1/2" Red Head / Trubolt Concrete Anchors 2 boxs of 25 quantity 50 lot. Hand counted, quantity 50 nuts washers and anchors. Free shipping!
• Qty=47: Powers 5/8"x7" Long Concrete Wedge Anchors Zinc Plated (NO NUTS/Washers) - See photos.
• TW Red Head Wedge Anchor 1/2" x 4-1/4" WS-1242
• TW Red Head Wedge Anchors WS-1226 1/2"x2-3/4"
• Mkt Fastening 2158100 Seismic Wedge Anchor,5/8X10,Pk5 - Seismic Wedge Anchor, Seismic Approved Yes, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 10 in, Max. Work Thickness 5 1/2 in, Thread Length 6 1/4 in, Thread Size 5/8 In.-11, Min.
• Red Head Concrete Anchoring Systems Trubolt Part# Ws-3470 - Red Head Concrete Anchoring Systems Trubolt Part# Ws-3470.
• Red Head ITW 1/4 X 3-1/4" Hwh 410 ss Buildex Tapcon Stainless Steel Concrete ... - ApplicationsThe anchor is made from 410 Stainless Steel, and is Silver Climaseal Coated. Therefore, the anchor must be installed so that a minimum of 1" of the anchor is embedded into the concrete.Maximum Fixture ThicknessThe maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 2-1/4".
• Mkt Fastening 2834100 Wedge Anchor,Galv. Steel, 3/4X10,Pk4 - MKT FASTENING 2834100 Wedge Anchor,Galv. Steel, 3/4x10,PK4. Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Galvanized, Anchor Dia. 3/4 in, Anchor Length 10 in, Max.
• Simpson Strong-Tie Wedge-All Wedge Anchor WA50234MG 1/2" x 2-3/4" *Box of 25 - Part #: WA50234MG. Box of 25 . Loc: 23C1-16.
• Simpson Strong-Tie Wedge-All Wedge Anchor WA50234MG 1/2" x 2-3/4" *Box of 25* - Part #: WA50234MG. Box of 25 .
• (5-Pk) Applied Stainless Steel Wedge Anchor 3/8" x 3-3/4" 101793097 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Powers Fasteners Power Stud 371920 Wedge Anchor 1/4 x 1-3/4" 100 Pack
• Confast 3/4" x 5-1/2" Wedge Anchor Plated Box of 20 Carbon Steel Zinc Plated
• Dewalt 5/8" X 10" Wedge Expandion Anchor Part# 2140539 - PART# 2140539. HAS 5/8" NUT BUT NO WASHER.
• RED HEAD TRUBOLT WEDGE ANCHORS, 5/8" x 6", LOT OF 7; f5 - Box of 7 wedge bolts - will ship without the box. 
• Dewalt 7465SD1 Power-Stud Wedge Anchor - 1" x 12" Box of 5 - Wedge Expansion Anchor DEWALT ENGINEERED BY POWERS UPC: 075352781372 Nut and washer are included Diameter: 1" Length: 12" Material: Carbon Steel Finish: Zinc Rod Size 1" x 12" Thread Length 8-3/8" .
• 5/16" x 1-1/4" (short) Lag Bolt Shields Concrete Anchors 1/2" Drill, 20 pk. - 5/16" x 1-1/4" (short) Lag Bolt Shields Concrete Anchors 1/2" Drill, 20 pk.. Location A-2-3
• 10-QTY, Hilti 1/2 x 7 Expansion Anchor galvanized, KB-TZ2 - 10-QTY, Hilti 1/2 x 7 Expansion Anchor galvanized, KB-TZ2. You are buying what is in the photos. Missing a few nuts/washers. See photos
• DeWalt 06320MC Steel Dropin Carbon 5/8" - 4Pcs - New - DeWalt 06320MC Steel Dropin Carbon 5/8" - 4Pcs - New.
• 1/4 In. X 2 In. Flat Philips Head HLC Sleeve Anchors (5-Pack) - Hilti's line of HLC Sleeve Anchors provides high performance load values in block, masonry and concrete base materials. The pre-assembled stud-type anchor design makes your fastening project easier and quicker, as you can accomplish through-type fastenings even in bottomless holes.
• MKT Fastening 2612512 Wedge Anchor, 304 SS , 1/2"X5-1/2", 3 pk. - MKT Fastening 2612512 Wedge Anchor, 304 SS , 1/2"X5-1/2"", 3 pk. Location.  A-2-4
• MKT Fastening 2712334 Wedge Anchor, 304 SS , 1/2"X3 3/4", 10 pk. - MKT Fastening 2712334 Wedge Anchor, 304 SS , 1/2"X3 3/4", 10 pk. Location.  A-2-4
• Qty 9 - 5 1/2" Red head Trubolt® Wedge Anchor 10 nuts 8 washer lot - Qty  9 - 5 1/2" Red head Trubolt®  Wedge Anchor 10 nuts  8 washer lot
• (32-Pk) Concrete Drop In Anchor 3/8" RX-12 - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
• (10-Pk) DeWalt Power-Stud SD1 Wedge Expansion Anchor Steel 1" x 6" 7461SD1 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• (10-Pk) Lawson Wedge Type Stud Bolt Anchor Steel Zinc 1/2" x 5-1/2" 84033 - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
• wedge anchor bolts 1/2 inch x 7 no nuts and washers simpson - wedge anchor bolts 1/2 inch x 7 no nuts and washers simpson.
• 18-ct 1/2" x 8-1/2" Concrete Wedge Anchor Bolts. some wasgers and nuts ) powers - 18-ct 1/2" x 8-1/2" Concrete Wedge Anchor Bolts. some wasgers and nuts ) powers.   selling the anchors.  likely short on nuts and washers.   selling the anchors only.  free extras are tgebnuts which there are some.  not all though
• Dewalt PFM253381258 3/8"-1/2"-5/8" Multi-Thread WOOD-KNOCKER II+ -Wood Insert- - Model DEWA PFM253381258. • (50) Insert Anchors.
• Powers Fasteners 7454SD1-PWR Power-Stud+ Sd1 7/8" X 10" - Model POWR 7454SD1. The anchor is manufactured with a zinc plated carbon steel body and expansion clip. UL Listed; FM Approved. • Use in Category 1 cracked and uncracked concrete. Include nut and washer.
• Powers Fasteners 7450SD1-PWR Power-Stud+ Sd1 7/8" X 6" - Model POWR 7450SD1. • Consistent performance in high and low strength concrete. • (10) Wedge Expansion Anchors. • Code compliant with the 2015 IBC, 2015 IRC, 2012 IBC, 2012 IRC, 2009 IBC, and 2009 IRC.
• Powers Fasteners 7436SD1-PWR 5/8 X 7 Wedge Anchors SD1 25 Pack - Model POWR 7436SD1. • Wedge expansion concrete anchors are heavy-duty anchors used in cracked and uncracked concrete. Powers Fasteners - 7436SD1-PWR - 5/8 In. Power-Stud Carbon Steel Wedge Expansion Anchor - 25 Anchors.
• (100) Flat Head 1/4 x 4 Split Drive Anchors Concrete Nail-In Hammer-In - 100 PRE-EXPANDED DRIVE ANCHORS. COUNTERSUNK HEAD.
• WEJ Concrete Wedge Anchor, 1/4 x 3", #B1430 - It provides positive wedge connections to minimize wedge loosening due to vibratory loads. The unique wedge arrow design with its guiding notch allows the installer to direct the anchor’s forces away from seams and corners.
• Dottie Anchor Wedge W12-234
• Dottie Wedge Anchor W14314 1/4x3-1/4
• (Lot of 35) Letter F Concrete Wedge Anchor Expansion Anchors Nuts & Washers - Concrete Wedge Anchor Zinc Plated Expansion Anchors Includes Nuts & Washers. Never used, but some have light surface rust as shown in photos. Letter f is up 4.5" This total length is 4 6/8"
• Wedge Anchors-Ultra-Wedge Brighton Best Intl. (75) 1/2" x 4-1/2" NEW - Shield are all stamped with UW-BBI, and the bolt heads are stamped with the letter G. These bolts are of the Highest Industry Approvals-ASTM E-488/ICC-ES 3981. Brighton Best (BBI) website is easily located online and contains all ER and ICC reports to satisfy plan check engineers, and city building inspectors.
• 20 Concrete Wedge Anchor Bolts 3/4" x 10" Includes Nuts & Washers - Brand New
• *4-PACK* HILTI HSL 371785 M16/50 Heavy Duty Wedge Expansion Anchor - Anchor Size - 16mm.
• *New* HILTI HSL 371785 M16/50 Heavy Duty Wedge Expansion Anchor - HILTI HSL M16/50 Heavy Duty Wedge Expansion Anchor 371785.
• *NEW* HILTI HIS-N 258023 Internally Threaded Sleeve, HIS-N 3/4″ x 8-1/8″ - HILTI HIS-N Internally Threaded Sleeve, HIS-N 3/4″ x 8-1/8″, 258023, NEW. Designed for use in solid concrete in combination with the relevant Hilti HIT adhesive anchoring systems. Fastenings in concrete and masonry in combination with the relevant Hilti HIT injectable adhesive mortar.
• (10ct)Haydon C-1102 x 4in EG Assy Rigid Clamp 72389, 31416-00 - (10ct)Haydon C-1102 x 4in EG Assy Rigid Clamp 72389, 31416-00.
• 20 Heavy Duty Concrete Wedge Anchors 3/8" x 2-1/8" Masonry Hardware
• AIRTX 38054 4" Aluminum Wedge 1/4" NPTF Air Inlet Wedge
• REDHEAD trubolt 1/4 x 3 1/4" wedge anchor (100) - 100 REDHEAD trubolt 1/4 x 3 1/4" wedge anchors  WITH nuts and washers. . New leftover stock. ITEM #16
• Red Head Sleeve Anchors 3/8” x 3” qty 15 - Red Head Sleeve Anchors 3/8” x 3” qty 15. Uses- Solid concrete, block, brick. New leftover stock. Item #12
• Mkt Fastening 2819000 Wedge Anchor,Galv. Steel, 1X9,Pk4 - MKT FASTENING 2819000 Wedge Anchor,Galv. Steel, 1x9,PK4. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 1 in, Anchor Length 9 in, Max. Work Thickness 4 1/2 in, Thread Length 4 in, Thread Size 1 In.-8, Min.
• Dewalt 06150S-PWR 1/4" x 1-3/8" Lok-Bolt AS Acorn Nut 304 SS ANCHOR 100 PKG - Dewalt - 06150S-PWR - 1/4" x 1-3/8" Lok-Bolt AS Acorn Nut 304 Stainless Steel Sleeve Anchor (100/Pkg.).
• 5 pcs 7/8 x 6" Wedge Anchors - 5 pcs 7/8" x 6" Wedge Anchors. Complete with nuts and washers. New leftover stock. 5 pieces total. Minimum imbedment 3-7/8" ITEM 02
• (100) Short 5/16" Lag Bolt Shields 5/16 x 1-1/4 Concrete Anchors 1/2" Drill - 100 LAG SHEILDS. 5/16 SHORT.
• 8 Anchor KN 2 5/8x4 3/4 Bolts With Additional Hardware Kit 10909045 New - 8 Anchor KN 2 5/8x4 3/4 Bolts With Additional Hardware Kit 10909045 New. New in card hardware. Heavy duty lag bolts.
• Hilti Kwik Bolt II Concrete Stud Anchor Bolt 1/2" x 2-3/4" ** LOT OF 5 ** - You will NOT receive the surface that the item is sitting on or any other things that may be visible in the photo.
• BT001 Hilti Kwik Bolt II Concrete Stud Anchor Bolt 1/2" x 2-3/4" ** LOT OF 10 ** - You will NOT receive the surface that the item is sitting on or any other things that may be visible in the photo. LOT OF 10 .
• 5/8” dewalt concrete anchors - 5/8” dewalt concrete anchors. 1 box quantity-10
• Dewalt 7722HD5-PWR 1/2" Expansion Wedge Anchors (50 Pieces)
• Zoro Select U09200.037.0500 Sleeve Anchor,Flat,Cst,3/8In,5In,Pk25 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 5 in, Thread Size 5/16, Min. ZORO SELECT. General Purpose. & Recepticles. Electrical Outlets.
• New/Sealed (2-Pk) Hilti Anchor Rod 1" x 16" HAS-B-105 HDG 3688412 - New/Sealed. Ships within 1 business day using UPS or Fedex whichever is cheaper. Bthrmwall6
• Eyenut wej-it concrete anchor
• 1 1/4" wedge sleeve concrete anchor - For sale are 3 very large concrete anchors.
• RAMSET Red Head COBRA Untested Parts Only
• (QTY 36) 5/8"-11 x 12" Hot Dip Galvanized Anchors ***FREE SHIPPING - 100% Genuine U S A S E L L E R.
• Red Head LDT-1230 Large Diameter Tapcon 1/2-Inch by 3-Inch Anchor (25 per Box) - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• Red Head LDT-3850 Large Diameter Tapcon 3/8-Inch by 5-Inch Anchor (40 per Box) - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• Red Head LDT-3840 Large Diameter Tapcon 3/8-Inch by 4-Inch Anchor (50 per Box) - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• Red Head LDT-1240 Large Diameter Tapcon 1/2-Inch by 4-Inch Anchor (25 per Box) - The anchor bodies are made of hardened carbon steel and zinc plated, Grade 5. The anchors have a finished hex washer head with anti-rotation serrations to prevent anchor back-out, and the head of the anchor is stamped with a length identification code for easy inspection.
• #6-18 x 1/2" Flat Head Phillips Drive Sharp Point Plain Finish Brass Wood Screw - Has never been used or put into service, but has been in storage and may. show signs of shelf wear/age.
• HUCK 3LC-2R16G Collar, 1/2" Dia./Thread Size, Over 500 Pieces Free Shipping!!! - HUCK 3LC-2R16G Collar, 1/2" Dia./Thread Size, Over 500 Pieces Free Shipping!!!.
• Dewalt Concrete Wedge Anchors, 3/8"x5", full box of 50 - Part# 46U125 - Dewalt Seismic Wedge Anchors. Sealed box of 50 Dewalt Seismic Approved Wedge Anchors, 3/8" diam x 5" long. They feature a zinc-plated finish to help prevent corrosion. Carbon steel models are suitable for use in Category 1 cracked and uncracked concrete.
• WEJ-IT 1" Diam, 1" Drill, 10" OAL Wedge Concrete Anchor Zinc-Plated Steel - For sale are 8 Wej-It concrete anchors. They are each 1" diameter and 10" long, end-to-end, and work best in an 8" deep hole. The driver nuts can be turned by a 1 1/2" wrench. 
• Mkt Fastening 2878800 Wedge Anchor,Galv. Steel, 7/8X8,Pk4 - MKT FASTENING 2878800 Wedge Anchor,Galv. Steel, 7/8x8,PK4. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 7/8 in, Anchor Length 8 in, Max. Work Thickness 4 in, Thread Length 4 in, Thread Size 7/8 In.-9, Min.
• (Lot of 10) 1/2" x 7" Concrete Wedge Anchor Bolts - Lot of 10, Brand New Wedge Anchor Bolts with Nuts & Washers.
• (5-Pk) Kimball Midwest Wedge Anchor 5/8" x 3-1/2" 483218 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Hilti KWIK Bolt TZ Expansion Anchor- 316 Steel - KB-TZ 3/8" x 3"- 411727 Box/50 - Part # - 411727. Hilti KWIK Bolt TZ Expansion Anchor - 316 Stainless Steel - KB-TZ 3/8" x 3". AISI 316 Stainless Steel. Anchor Material Tension (lb): 1545. Small Minimum Edge Distance and Spacing for Maximum Design Flexibility.
• I beam clamps Metric 4.8 Bolt and Throw Holes for Threaded stock. 6 Pcs.
• 25ea. Confast 1/2” x 7” stainless 304 wedge anchors - 25ea. Confast 1/2” x 7” stainless 304 wedge anchors.
• concrete bent anchor bolts 3/4 x 18" galvanized ( Lot of 8) - For sale are lot of 8 --- 3/4 x 18" anchors.
• Mkt Fastening 2538214 Wedge Anchor,Gr 5,3/8 X2 1/4,Pk50 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 2 1/4 in, Max. Work Thickness 1/4 in, Thread Length 1 3/16 in, Thread Size 3/8 In.-16, Min.
• Mkt Fastening 2558312 Wedge Anchor,Gr 5,5/8 X3 1/2,Pk25 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 3 1/2 in, Max. Work Thickness 1/8 in, Thread Length 1 5/8 in, Thread Size 5/8 In.-11, Min.
• DeWalt Seismic Anchors 50 Pack Stud Wedge Expansion 3/8" x 3-3/4" 7415SD1
• Dottie W38334 - 3/8 x 3-3/4" Wedge Anchors - Box of 33 Anchors - Free Shipping - Dottie W38334. 3/8 x 3-3/4" Wedge Anchors. Box of 33 Anchors. DON'T MISS OUT ON THIS GREAT DEAL!
• ( QTY 50 ) 3/8 x 3 Concrete Wedge Anchors Bolts Masonry Sleeve Anchor Zinc - ( QTY 50 ) 3/8 x 3 Concrete Wedge Anchors Bolts Masonry Sleeve Anchor Zinc.
• 3/8 In. X 4 In. Flat Philips Head HLC Sleeve Anchors (5-Pack) - Line of HLC Sleeve Anchors provides high-performance load values in a block, masonry, and concrete base materials. The pre-assembled stud-type anchor design makes your fastening project easier and quicker, as you can accomplish through-type fastenings even in bottomless holes.
• Power Bull Wedge Anchors 3/4" X 4-1/4" Zinc - open box, new, can sell individual - Power Bull Wedge Anchors 3/4" X 4-1/4" Zinc - open box, new, can sell individual.  These are priced individually on the sell price, FYI due to box being opened.
• (5) POWERS Concrete Stud / Wedge Anchor 3/4" x 7" Steel, Zinc - Five (5) - POWERS Concrete Stud / Wedge Anchor 3/4" x 7" Steel, Zinc. We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States. It’s what we do, we do it well!
• MY TRIBE | ong Sleeve Dress Asymmetric Ruched S Stretch Black White Gray - Bundle & save. Follow for more great finds .
• (2) Concrete Wedge Anchor Bolt 304 Stainless Steel 1/2" x 8-1/2" Long - We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States. Free local pick up. It’s what we do, we do it well!
• 1/4-20 x 2-1/4" Concrete Wedge Anchor Zinc Plated (19 Qty) - If you feel the item is not as described we will do whatever is necessary to make it right.
• powder Activated Fasteners - powder Activated Fasteners. 100- Hilti X-AL-H 62P8 2 1/2” studs84 - Ramset 2 1/2” studs150- Ramset 3” studs94- Hilti X-AL-H-72P8 2 3/4” studs198- Simpson PDP-300 3” studs100- Simpson Nailon 1/4 x 2” anchors50- Simpson Nailon 1/4” x 1 1/2” anchorsAbout 18# total weight
• Global Sleeve Anchors Set 3/4" x 4-1/2" with Drill Bit 3/4" x 8" 320743 - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Box Of 50 3/8 X 2 1/4 Wedge Anchor Zinc Plated Peco - Up for sale is a Box Of 50 3/8 X 2 1/4 Wedge Anchor Zinc Plated Peco brand. The boxes are dirty with residue on the lids and may have some wear on them but the pieces inside are fine.
• 5/8-11 x 4-1/2" Concrete Wedge Anchor Zinc Plated (7 Qty) - If you feel the item is not as described we will do whatever is necessary to make it right.
• 1/2" x 4-3/4" Strike Anchor Replacement Pins (28 Qty) - If you feel the item is not as described we will do whatever is necessary to make it right.
• 3/8" x 4-3/4" Strike Anchor Replacement Pins (14 Qty) - If you feel the item is not as described we will do whatever is necessary to make it right.
• 3/8" x 4-3/4" Strike Anchor Yellow Zinc Plated (36 Qty) Anchors Only - 3/8" x 4-3/4" Strike Anchor Yellow Zinc Plated (36 Qty). Bottom of anchor to begining of threads: 3-1/2". If you feel the item is not as described we will do whatever is necessary to make it right.
• HILTI HIS-N Internally Threaded Sleeve, HIS-N M 16 x 170 , 258018, 4-Pack NEW
• Frame Fixer Insert Anchor Concrete Masonery Fastener 8mm x 150mm - 34 Pack - Returns are best done using Ebay's return system. If you go to www.ebay.co.uk, then click on My Summary, to the right side of the product you would like to return should be a drop down and the option return this item. Please follow the prompts from here. If your return is over the 30 day period or there is a problem please contact us first via Ebay messaging or by phone. You can return the item to us as supplied within 30 days for refund of your item price or replacement. Please make sure your return is in its original packaging & goods are in resalable condition. Payment via Bank Transfer, Visa Credit/Debit, Discover & Mastercard payments maybe available on larger value transactions. Phairs are one of the UKs leading suppliers of Electrical, Security, Home and Garden products. We stock a.
• MKT Sup-R Stud and Anchor 1" x 9" #2619000 (QTY 5) - 1" x 9" MKT Sup-R Stud® + Anchor Grade 5, 5/Box. The anchor is made from Grade 5, and is Yellow Di-chromated Plated. This anchor is designed for use in Concrete only, and should never be used in block or brick base material.
• BOX 15 RED HEAD 3/8" x 3" Hex-Head Sleeve Anchors for Blocks Brick Concrete - BOX 15 RED HEAD 3/8" x 3" Hex-Head Sleeve Anchors for Blocks Brick Concrete.
• Hilti Kb-Tz Ss16 Kwik Bolt Stainless Steel Anchor Bolt 1/2 X 5 1/2 -20 Per Box
• Simpson StrongTie WA37300 (Lot of 2) Wedge Anchors (3/8 x 3 ) QTY: 50
• Lot of 7 NEW Uline H-2121 Concrete Installation Kits (Contain 4 @ 1" Anchors) - This lot is for a Lot of 7 NEW Uline H-2121 Concrete Installation Kits (Each kit contains Contain 4 @ 1" Anchors).
• Red head Ramset Concrete anchor 1/4 - 20 x 1 1/8 '' Drive pin 1/4 barrel 100 pcs - DRIVE PIN CONCRETE ANCHOR. FOR 1/4 BARREL. QTY : 100 PCS PER BOX. 2 3/8 LENGTH TOTAL. 1/4 - 20 NC X 1 1/8 SCREWS. THEY ARE NEW BUT THE BOX HAVE BEEN OPENED.
• Hillman 5033 Holds Upto 5 lbs. Blue Plastic Anchor 6 to 8x3/4 in. (Pack of 10) - Hillman 41428 Steel/Zinc Round Head Toggle Bolt 1/4 x 3 in. Hillman 41422 Mushroom Head Round Steel Toggle Bolt 1/8 Dia. Hillman 41402 Plastic Blue Conical Anchor with Screw #8-10 x 7/8 in. Hillman 41404 Plastic Blue Conical Anchor with Screw #10-12 x 1 in.
• Mkt Fastening 275841S Wedge Anchor,316 Ss,5/8X4 1/2,Pk5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 5/8 in, Anchor Length 4 1/2 in, Max. Work Thickness 1 3/4 in, Thread Length 2 5/8 in, Thread Size 5/8 In.-11, Min.
• RED HEAD 3/8 in. x 1-7/8 in. Sleeve Anchor, 50+Pieces,. HN3817 - RED HEAD 3/8 in. x 1-7/8 in. Sleeve Anchor, 50+Pieces,. HN3817.  Use for cement of block work if you need more the one box message me I do have over 10 boxes to sell. 
• HEAVY DUTY HD ANCHOR SCREWS 5/8” X 8" FOR THDB62800HR10 Box Of 10 - HEAVY DUTY HD ANCHOR SCREWS 5/8” X 8" FOR THDB62800HR10 Box Of 10.
• 6.8Lb Assortment ~ Wedge Anchors Steel Concrete Masonry Expansion Anchors
• Qty of 13, 3/8-16 x 3-3/4" Concrete Wedge Anchor Zinc Plated, Pre-owned Old Stk - Quantity of 13, 3/8-16 x 3-3/4" Concrete Wedge Anchor Zinc Plated, Pre-owned Old Stock, some Blemishes, See Pictures. Will be shipped in a ZipLock Bag. Includes FREE USPS PRIORITY Shipping.
• 3/4" x 5-1/2" steel stud concrete anchor - These anchors came with an automotive lift, but I chose not to use them.  They are 3/4" x 5-1/2" long.  They appear to be zinc plated steel.  The dimensions match Mcmaster-Carr part 91578A217.  This listing is for a quantity of 16 anchors.
• Red Head Ww-10090 Wedge Anchor,304 Ss,1X9,Pk5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 1 in, Anchor Length 9 in, Max. Work Thickness 3 1/2 in, Thread Length 2 1/2 in, Thread Size 1 In.-8, Min.
• (19) Red Head RL-58 Drop-In Anchors, 5/8"-11, 2-1/2" Long - (19) Red Head Drop-In Anchors, 5/8"-1, 2-1/2" Long.
• Qty 5 POWERS FASTENERS POWER-STUD WEDGE ANCHOR 1/2" x 7” - Qty 5  POWERS FASTENERS POWER-STUD WEDGE ANCHOR 1/2" x 7”
• Hillman 370704 Plastic Round Head High/Low Thread Ribbed Anchor 4-6 Dia.x1 L in. - Hillman. 112 in. L Plastic Round Head Ribbed Anchor 100 pk. The ribs on the anchor body prevent it from turning while tightening the screw. (Screws are not included.). Product Type: Ribbed Anchor. Light duty in concrete, brick and stone.
• Hillman 9409 Holds Upto 60 lbs. Nylon Nail-In Anchors 1/4 x 1 in. (Pack of 6) - Hillman 1/4 in. L Zinc Truss Head Truss Head Anchor 4 pk. Hillman 41428 Steel/Zinc Round Head Toggle Bolt 1/4 x 3 in. Hillman 41422 Mushroom Head Round Steel Toggle Bolt 1/8 Dia. Hillman 41402 Plastic Blue Conical Anchor with Screw #8-10 x 7/8 in.
• Athleta Cottonwood Sweater Dress Marled Grey Small - Athleta Cottonwood Sweater Dress Marled Grey Size Small Tall. Dry Cleaning sticker on clothing.
• (30) Concrete Wedge Anchor Bolts 3/8 x 3-3/4 Includes Nuts & Washers - (30) Concrete Wedge Anchor Bolts 3/8 x 3-3/4 Includes Nuts & Washers.
• 5PK MKT Fastening 1" x 9" Wedge Anchor Grade 5 2519000 - PLEASE SEE PICTURES FOR DETAILS New open box 5PK MKT Fastening 2519000 Wedge Anchor,Gr 5,1 X 9 In MKT FASTENING Wedge Anchor: Steel, Zinc Plated, 1 in Anchor Dia., 9 in Anchor Lg, Grade 2
• (42) Red Head RM-12, 1/2" Drop-In Anchors
• (6) 3/4" x 7" Stainless Steel Wedge Anchors - Drive, lag, lead, lag shield, expansion, tapcon, SDS, anchor, stone, machine. Red Head, Hilti, Concrete, Brick, Masonry, Cinder.
• (6) 3/4" x 7" Stainless Steel Wedge Anchors - Drive, lag, lead, lag shield, expansion, tapcon, SDS, anchor, stone, machine. Red Head, Hilti, Concrete, Brick, Masonry, Cinder.
• (2) 3/4" x 7" Stainless Steel Wedge Anchors
• AMPCO W6 Non-Sparking Flange Wedge 2"x7" (TRP044190) - AMPCO W6 Non-Sparking Flange Wedge 2"x7". AMPCO W6 NON-SPARKING NON-MAGNETIC FLANGE WEDGE 2"X7". Gold, Silver, Diamonds, Jewelry, Electronics, Tools, Just about anything of value! Things I Buy Triangle Pawn has been serving the Golden Triangle area since 1985.
• Red Head Sleeve Anchor 6" X 5/8" 50120 - We will take care of you!
• (10) Red Head RM-58 Drop-In Anchors, Flange, 5/8" -11 x 2-1/2" Long
• Frame Fixer Insert Fastener Anchor Concrete Masonery 8mm x 150mm - 44 Pack - Returns are best done using Ebay's return system. If you go to www.ebay.co.uk, then click on My Summary, to the right side of the product you would like to return should be a drop down and the option return this item. Please follow the prompts from here. If your return is over the 30 day period or there is a problem please contact us first via Ebay messaging or by phone. You can return the item to us as supplied within 30 days for refund of your item price or replacement. Please make sure your return is in its original packaging & goods are in resalable condition. Payment via Bank Transfer, Visa Credit/Debit, Discover & Mastercard payments maybe available on larger value transactions. Phairs are one of the UKs leading suppliers of Electrical, Security, Home and Garden products. We stock a.
• ini moni 1/2" x 4-1/2" Concrete Anchor Stainless Steel Heavy Duty Wedge Ancho... - 【Fastener for Concrete】: Concrete wedge anchor is only suitable for concrete, not for blocks or brick substrates, etc. It is very convenient for you to carry and easy to install. Whether you are securing a safe to concrete in your garage or attaching a boat lift to a seawall, you can count on Concrete Wedge Anchors to hold tight.
• ini moni 1/2" x 5-1/2" Concrete Anchor Stainless Steel Heavy Duty Wedge Ancho... - 【Fastener for Concrete】: Concrete wedge anchor is only suitable for concrete, not for blocks or brick substrates, etc. It is very convenient for you to carry and easy to install. Whether you are securing a safe to concrete in your garage or attaching a boat lift to a seawall, you can count on Concrete Wedge Anchors to hold tight.
• ini moni 1/2" x 3-3/4" Concrete Anchor Stainless Steel Heavy Duty Wedge Ancho... - 【Fastener for Concrete】: Concrete wedge anchor is only suitable for concrete, not for blocks or brick substrates, etc. It is very convenient for you to carry and easy to install. Whether you are securing a safe to concrete in your garage or attaching a boat lift to a seawall, you can count on Concrete Wedge Anchors to hold tight.
• Hillman 372215 1/4" x 1 3/4" Heavy Duty Concrete Anchor Zinc Plated Box Of 25
• (15-Pk) Powers SD1 Expansion Anchor 1/2" x 5-1/2" 7424SD1 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Powers Fasteners 6400SD-PWR Snake and 1/4" Internal Thread, 100 Per Box - Powers Fasteners 6400SD-PWR Snake and 1/4" Internal Thread, 100 Per Box.
• Powers Fasteners 6401SD-PWR 3/8"Snake Screw Drop Anchor 50 Per Box - Powers Fasteners 6401SD-PWR 3/8"Snake Screw Drop Anchor 50 Per Box.
• Fastenal 50330 FPHS 3/8" x 4" Sleeve Anchors (Box of 50) - Fastenal 50330 FPHS 3/8" x 4" Sleeve Anchors (Box of 50).
• Fastenal 50329 FPHS 3/8" x 2 3/4" Flat Head Phillips Sleeve Anchors - Fastenal 50329 FPHS 3/8" x 2 3/4" Flat Head Phillips Sleeve Anchors.
• (25-Pk) Lawson Wedge Type Stud Bolt Anchor Steel 1/4" x 3-1/4" 84027 - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
• Galvanized Anchor 3/4"-10 x 4-1/2" - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• (2-Pk) Hilti Anchor Rod 1" x 16" HAS-B-105 HDG - We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Dewalt Setting Tool Internal Thread Chrome 06313-PWR - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Hilti Cast-in-Place Anchor 3/8" x 1/2" - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you!
• (15-Pk) Red Head Anchor Sawtooth Hardened Steel 3" x 1/2" LDT-5830 - We will take care of you!
• (15-Pk) Wedge Anchor Zinc Plated 3/4"-10 x 6-1/4" WA34614 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• (4-Pk) Global Industrial Sleeve Anchor Steel 1/2" x 3" WG940379 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Hilti Carbon Steel Anchor 5/8" - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• (106-Pk) FPPI Drop-In Anchor Zinc Plated Steel 3/8" 4399001480 - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
• (10-Pk) Hillman Hex Head Sleeve Anchor Alloy Steel 1/2" x 4" 370831 - We will take care of you!
• (48-Pk) FPPI Drop-In Anchor Zinc Plated Steel 3/8" 4399001480 - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
• (10-Pk) Hillman Wedge Anchor 1/2" x 4-1/2" 370989 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Powers Power-Stud+ SD1 Wedge Anchor 5/8" x 3-1/2" 7430SD1 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• (4-Pk) Global Industrial Sleeve Anchor Hex Nut 3/4" x 4-1/4" 320742 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• DeWalt Caulk-In Anchor Setting Tool for Expansion 1/4" 09221 - The product image is the actual item you will receive including all contents unless otherwise noted.
• Grainger Approved Wedge Anchor Masonry 3/8"-16 x 2-3/8" 38DWG - We are not an authorized dealer of this product. This product has no manufacturers warranty. We will take care of you!
• ASMC Industrial Coarse Thread Wedge Anchor Carbon Steel 1"-8 x 6" 0000-133142 - ASMC Industrial Coarse Thread Wedge Anchor Low Carbon Steel Zinc Plated 1"-8 x 6" 0000-133142. We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
• Raw Products Concrete Drop in Anchors Zinc Plated 5/8"-11 x 2-1/2" 1040-002-0034 - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
• Simpson Strong-Tie Bearing Plate Galvanized 3" x 3" BP 3/4-3 - The product image is the actual item you will receive including all contents unless otherwise noted. We are not an authorized dealer of this product. This product has no manufacturers warranty.
• (100-Pk) The Hillman Group Hammer Drive Anchor 1/4" x 1" 372054 - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you!
• Drop In Anchor Carbon Steel 3/8" x 1/2" x 1-9/16" - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
• (4-Pk) MKT Sup-R Stud and Anchor 1" x 9" 2619000 - The product image is the actual item you will receive including all contents unless otherwise noted. We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Concrete Ferrule 4" - Concrete Ferrule 4". We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• (40-Pk) Hillman Wedge Anchor 1/4" x 2-1/4" 370980 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• (4-Pk) Conac Waved Tail Anchor 4.0T RD30 Thread Lifting System Concrete WTA040 - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you!
• Wej-It Ankr-TITE Wedge Anchors Stainless Steel 3/8"X3" 48 Pcs & 3/8"x4" 2pcs - I also have other Wej-It Ankr-TITE Wedge Anchors Hot dipped galvanized 3/8"X5" 49Pcs & stainless steel 3/8"x4" 2pcs For sale. WEDGE ANCHOR. 25 of 48 PCs. Open box. Stainless STEEL.
• (11) 5/8-11 x 6 Concrete Wedge Anchor Bolts Hot Dipped Galvanized - Wedge Anchors. Anchor Type Fastener Type Drill Size Item Length.
• Qty 10 HILLMAN POWERS FASTENERS POWER-STUD WEDGE ANCHOR 5/8" x 4-1/2” ShipsFree
• Qty 12 HILLMAN POWERS FASTENERS POWER-STUD WEDGE ANCHOR 1/2" x 3-3/4” ShipsFree
• (40) 3/8 X 1 7/8“ Sleeve-All Concrete Sleeve Anchors ~ Simpson Strong-Tie - (40) 3/8 X 1 7/8“ Sleeve-All Concrete Sleeve Anchors ~ Simpson Strong-Tie.
• HILTI -Box Of 25 KB3 HDG Expansion Anchor 1/2in X 5-1/2in Lt #378085 - 1 Box of 25ea Hilti Exp Anchor Bolts KB3 1/2 x 5 1/2 LT HDG. These are all New. $138 on Hilti website. 
• Wej-It Ankr-TITE Wedge Anchors, 5/8"x 5", Carbon Steel AT5850 Box of 10 New - Material carbon steel.
• Dottie W12234, 1/2 x 2-3/4" Wedge Anchors - Box of 40 Anchors - Free Shipping - Dottie W12234. 1/2 x 2-3/4" Wedge Anchors. Box of 40 Anchors. DON'T MISS OUT ON THIS GREAT DEAL!
• 2 Sets - Red Head (Old) 25pk Steel Expansion Wedge Anchor 1/2" X 2 3/4" (ws-1226 - 2 Sets - Red Head (Old) 10pk Expansion Wedge Anchor 5/8" X 3 1/2".
• 2 Sets - Red Head (Old) 10pk Expansion Wedge Anchor 5/8" X 3 1/2" - 2 Sets - Red Head (Old) 10pk Expansion Wedge Anchor 5/8" X 3 1/2".
• 1/4 x 3" Rock River Steel Drive Nail Concrete Anchors 50509 (Box of 50) - 1/4 x 3" Rock River Steel Drive Nail Concrete Anchors 50509 (Box of 50).
• Rock River Steel Drive Nail Concrete Anchors 1/4 x 1 1/4" 50505 (Box of 100) - Rock River Steel Drive Nail Concrete Anchors 1/4 x 1 1/4" 50505 (Box of 100).
• Powers Fasteners - Concrete Anchors - 3/4"x 5-1/21" Stainless steel. Box of 20 - Powers Fasteners - Concrete Anchors - 3/4in. dia, 3/4in. Drill, 5-1/2in. Oal, Wedge Expansion Concrete Anchor - Stainless Steel. • ICC Approved for Cracked Concrete- No. • ICC Approved for Un-Cracked Concrete- No.
• Simpson Strong-Tie WA37214 3/8" x 2-1/4" Wedge Anchor 50-Count (Lot of 2) - A non-bottom-bearing, wedge-style expansion anchor for use in solid concrete or grout-filled masonry. Threaded studs are set by tightening the nut to the specified torque. The Wedge-All is code listed for grout-filled masonry applications.
• Mkt Fastening 2778600 Wedge Anchor,303/304 Ss,7/8X6,Pk4 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 7/8 in, Anchor Length 6 in, Max. Work Thickness 2 in, Thread Length 2 1/4 in, Thread Size 7/8 In.-9, Min.
• Mkt Fastening 2758312 Wedge Anchor,303/304 Ss,5/8X3 1/2,Pk5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 5/8 in, Anchor Length 3 1/2 in, Max. Work Thickness 3/4 in, Thread Length 1 5/8 in, Thread Size 5/8 In.-11, Min.
• Mkt Fastening 2878600 Wedge Anchor,Galv. Steel, 7/8X6,Pk4 - MKT FASTENING 2878600 Wedge Anchor,Galv. Steel, 7/8x6,PK4. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 7/8 in, Anchor Length 6 in, Max. Work Thickness 2 in, Thread Length 3 1/2 in, Thread Size 7/8 In.-9, Min.
• Mkt Fastening 271270S Wedge Anchor,316 Ss,1/2X7,Pk10 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 7 in, Max. Work Thickness 2 1/2 in, Thread Length 1 1/4 in, Thread Size 1/2 In.-13, Min.
• Mkt Fastening 2634100 Wedge Anchor,Zinc Plated,3/4X10,Pk10 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/4 in, Anchor Length 10 in, Max. Work Thickness 3 1/4 in, Thread Length 4 in, Thread Size 3/4 In.-10, Min.
• Mkt Fastening 2611412 Wedge Anchor,Zinc Plated,1 1/4X12,Pk4 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 1 1/4 in, Anchor Length 12 in, Max. Work Thickness 5 1/2 in, Thread Length 3 1/4 in, Thread Size 1 1/4 In.-7, Min.
• Mkt Fastening 275850S Wedge Anchor,316 Ss,5/8X5,Pk5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 5/8 in, Anchor Length 5 in, Max. Work Thickness 2 1/4 in, Thread Length 3 1/4 in, Thread Size 5/8 In.-11, Min.
• Powers Lok-Bolt AS Sleeve Expansion Anchor Combo Flat Head 3/8" x 6" - Powers Lok-Bolt AS Sleeve Expansion Anchor Combo Flat Head 3/8" x 6" Carbon Steel Zinc Plated. We will take care of you!
• (4-Pk) Global Industrial Hex Nut Sleeve Anchor Steel 3/4" x 4-1/2" 320742 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Hilti 3/8" x 3-1/4" Kwik Bolt TZ2 Carbon Steel Zinc Plated Concrete Anchor x50 - 3/8 in. x 3-1/4 in. Kwik Bolt TZ2 Carbon Steel Zinc Plated Concrete Anchor....
• Zoro Select U70411.062.1000 Wedge Anchor,5/8",10",Zp Carbon Stl,Pk2 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 10 in, Max. Work Thickness 3 1/8 in, Thread Length 7 13/16 in, Thread Size 5/8 In.-11, Min.
• Dayton A16 Snap Tie Wedge for Concrete - High Strength Carbon Steel 55 PCS LOT - 9 ARE NEW AND 46 ARE USED TOTAL 55 PCS
• Sup-R Stud 2614314 Wedge Anchor,Zinc Plated,1/4X3 1/4,Pk20 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 3 1/4 in, Max. Work Thickness 2 1/8 in, Thread Length 2 1/4 in, Thread Size 1/4 in, Min.
• 11pcs Hilti 5/8" x 4 3/4" KB-TZ2 SS316 Wedge Anchor Cracked Concrete 2210284 - Ultimate-performance wedge anchor for cracked concrete and seismic (316 stainless steel). Material, corrosion: Stainless Steel, 316. Specializing in the “unusual” and “bulk deals.”. “BUY IN BULK AND SAVE”.
• (48 Pcs) Greenlee - 84305 Caulking Anchors w/ Setting Tool - 3/8" (NEW in BOX) - MPN: 84305. Caulking Anchors with Setting Tool. (Box is dirty and has considerable shelf wear, but the Anchors are new inside and ready to put into service. ). ZINC ALLOY AND LEAD. We can not get an accurate freight quote without out all this information.
• NIP 4 pcs. 5/16"x 2.75" Concrete & Brick Wedge Anchor Bolts Zinc Plated Steel - 5/16"x 2.75" Concrete & Brick Wedge Anchor Bolts. Bolts allows you to drill into concrete and brick. Threaded bolt sticks out from the wall and allows you to mount your sign.
• DeWalt 49 Pack Stainless Steel Drop In Expansion Anchors Internal Threaded 06208
• Mkt Fastening 2638300 Wedge Anchor,Zinc Plated,3/8X3,Pk20 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 3 in, Max. Work Thickness 1 3/8 in, Thread Length 1 7/8 in, Thread Size 3/8 In.-16, Min.
• 75 Pack HILTI KCM-MD Kwik Cast In Place Multi-Thread Anchor 3/8”x1/2” New - LOCATION: E2S3.
• (QTY.4) 1/2-13 X 8-1/2" Wedge Anchor Zinc Plated Carbon Steel
• Powers Fasteners Mpn 05015S 3/8 X 1- 7/8 In Wedge Anchors 50 Pcs - POWERS FASTENERS MPN 05015S 3/8 X 1- 7/8 IN WEDGE ANCHORS 50 PCS. I PACK AND SHIP DAILY
• Simpson Wedge-All 5/8" x 6" Mechanically Galvanized Expansion Anchor 20 Pack
• Cobra Parawedge Concrete Anchor w/ Nuts & Washers 3/8" x 3" 496NS Lot Of 11 - Cobra Parawedge Concrete Anchor w/ Nuts & Washers 3/8" x 3" 496NS Lot Of 11.
• Mkt Fastening 271223S Wedge Anchor,316 Ss,1/2X2 3/4,Pk10 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 2 3/4 in, Max. Work Thickness 1/2 in, Thread Length 1 1/2 in, Thread Size 1/2 In.-13, Min.
• Qty 10 HILLMAN POWERS FASTENERS POWER-STUD WEDGE ANCHOR 5/8" x 8-1/2” ShipsFree
• Qty 10 HILLMAN POWERS FASTENERS POWER-STUD WEDGE ANCHOR 5/8" x 7” ShipsFree
• Qty 10 HILLMAN POWERS FASTENERS POWER-STUD WEDGE ANCHOR 5/8" x 3-1/2” ShipsFree
• Qty 25 HILLMAN POWERS FASTENERS POWER-STUD WEDGE ANCHOR 1/2" x 3-3/4” ShipsFree
• Mkt Fastening 2519000 Wedge Anchor,Gr 5,1 X 9 In,Pk10 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 1 in, Anchor Length 9 in, Max. Work Thickness 3 1/2 in, Thread Length 2 1/4 in, Thread Size 1 In.-8, Min.
• Qty 48 - Red Head RM-38 Drop-In Concrete Anchor, 3/8-16 Thread - Qty 48 - Red Head RM-38 Drop-In Concrete Anchor, 3/8-16 thread, for use with 1/2" drill size. 1-5/8" long. You will receive the anchors shown in the photos.
• Hilti KH- EZ 1/4 X 4" (10pc) - Hilti KH- EZ 1/4 X 4"  (10pc)
• RED HEAD GWS-3822 Expansion Trubolt steel Wedge Anchr,3/8"D,2-1/4"L, PK50 - RED HEAD GWS-3822 Expansion Trubolt steel Wedge Anchr,3/8"D,2-1/4"L, PK50.
• Hilti Kwik Bolt TZ2 Wedge Anchor 1/2" X 3 3/4" #2210254 Box of 20 - STUD ANCHOR KB-TZ2 1/2x3 3/4#2210254. Ultimate tension and shear performance for seismic relevant applications as well as cracked concrete (tension zone).
• New (8) Hex Nut Sleeve Anchors Expansion Screws Bolts 5/16" x 3" OAL - Up for your consideration are these New (8) Hex Nut Sleeve Anchors Expansion Screws Bolts 5/16" x 3".
• Mkt Fastening 261550I Drop-In Anchor,1-8 X 5-1/2 In - Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Zinc Plated, Anchor Dia. 1 1/4 in, Anchor Length 5 1/4 in, Thread Size 1 In.-8, Ultimate Tension (Lbs.). MKT FASTENING. Westward 38Rv99 Power Bit,Sae,1/4",Hex Power Drive,#2.
• 10 Pc Hilty 3/4” x 61/4” kwik bolt t72 carbon steel zinc Plated concrete anchor - 10 Pc Hilty 3/4” x 61/4” kwik bolt t72 carbon steel zinc Plated concrete anchor.
• Mkt Fastening 2678600 Wedge Anchor,Zinc Plated,7/8X6,Pk4 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 7/8 in, Anchor Length 6 in, Max. Work Thickness 2 in, Thread Length 3 1/2 in, Thread Size 7/8 In.-9, Min.
• Cement Concrete Wedge Anchors 3/8” x 3" - Cement Concrete Wedge Anchors 3/8” x 3". 22 Count.
• 1/2”-13 x 7” 304 Stainless Steel UltraWedge Anchors (25/pkg) - 1/2”-13 x 7” 304 Stainless Steel UltraWedge Anchors (25/pkg).
• Imperial Oversized Low Carbon Stock Key Zinc Plated Steel 1/2" x 12" 71051 - The product image is the actual item you will receive including all contents unless otherwise noted.
• Wedge Anchor Zinc H008196 - Incomplete - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Sleeve Anchors 5/16" x 1-1/2" (100pc Lot) Zinc Plated Steel Factory New - Sleeve Anchor (100pc LOT). 5/16 x 1-1/2" Zinc- Plated Steel. Factory New.
• Sleeve Anchors 5/16" x 2-1/2" (100pc Lot) Zinc Plated Steel Factory New - Sleeve Anchor (100pc LOT). 5/16 x 2-1/2" Zinc- P lated Steel. Factory New.
• 10 PACK 1" x 36" Concrete Bent Anchor L Bolts *NO WASHERS or NUTS* 45233 - *NO WASHERS OR NUTS INCLUDED* 10 PACK ~ Concrete Bent Anchor L Bolts 1" x 36" Anchor Bolt: 1 in Anchor Dia., 36 in Anchor Lg, 6 1/4 in Thread Lg, 10 PK
• Sleeve Anchors 1/4" x 2-1/4" (100pc Lot) Zinc Plated Steel Factory New - Sleeve Anchor (100pc LOT). 1/4 x 2-1/4" Zinc- P lated Steel. Factory New.
• New HILTI KB-TZ ½" X 5½" Concrete Anchors 304586 25 Per Box - Full unopened box of Hilti anchors. We will work with you to resolve any reasonable issues that may arise. Not sure what we would do if we could no longer treasure hunt. We are not able to send or combine invoices for international orders.
• Zoro Select B09100.075.0250 Sleeve Anchor,Hex Nut,3/4" Dia.,Pk52 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 3/4 in, Anchor Length 2 1/2 in, Thread Size 5/8, Min. ZORO SELECT. General Purpose. & Recepticles. Electrical Outlets. Light Industrial.
• 22PK MKT FASTENING M10 x 1.50mm x 96mm L Wedge Anchor Stud, M16205301 - New open box. 22 PACK 22PK MKT FASTENING M10 x 1.50mm x 96mm L Wedge Anchor Stud, M16205301.
• Mkt Fastening 275881S Wedge Anchor,316 Ss,5/8X8 1/2,Pk5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 5/8 in, Anchor Length 8 1/2 in, Max. Work Thickness 2 3/8 in, Thread Length 1 1/2 in, Thread Size 5/8 In.-11, Min.
• Mkt Fastening 2658700 Wedge Anchor,Zinc Plated,5/8X7,Pk5 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 7 in, Max. Work Thickness 1 3/8 in, Thread Length 4 in, Thread Size 5/8 In.-11, Min.
• Mkt Fastening 2734100 Wedge Anchor,303/304 Ss,3/4X10,Pk4 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 10 in, Max. Work Thickness 3 1/4 in, Thread Length 2 in, Thread Size 3/4 In.-10, Min.
• Mkt Fastening 2811200 Wedge Anchor,Galv. Steel, 1X12,Pk4 - MKT FASTENING 2811200 Wedge Anchor,Galv. Steel, 1x12,PK4. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 1 in, Anchor Length 12 in, Max. Work Thickness 7 1/2 in, Thread Length 4 in, Thread Size 1 In.-8, Min.
• large concrete anchors 3/4 dia 5 length x 15 - what can i say......  if you are looking to anchor something big to concrete  these may be for you.    fifteen total pieces.    3/4 inch in diameter...  5 inches long with 3 inches threaded.   good condition.  see the picts and email me with any questions, edw
• 1 0 count - Hilti KWIK Bolt TZ Expansion Anchor, 316 SS - KB-TZ 3/8" x 3-1/2" - Raising the industry standard again. Hilti's newest generation of Kwik Bolts - the Kwik Bolt TZ2 304 Stainless Steel Expansion Anchors - is raising the industry standard for wedge anchors. Don't settle for just any stud anchor.
• 30 Heavy Duty Hex Head Concrete Sleeve Anchors 5/8" x 2-1/2" Masonry Hardware
• 40 Heavy Duty Concrete Wedge Anchors 3/8" x 2-1/8" Masonry Hardware
• MKT FASTENING 2811200 Wedge Anchor 4Pk Galvanised Steel 1 X 12 Inch Anchor Size - Type Galvanized Steel. Material Steel.
• COBRA 502TS10 1/2 in. x 4-1/4 in. Wedge Anchor - pack of 10 - COBRA 502TS10 1/2 in. x 4-1/4 in. Wedge Anchor - pack of 10.
• Anchor Bolt Silver Zinc Plated Steel 3/4" x 4-3/4" - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Mkt Fastening 2734700 Wedge Anchor,303/304 Ss,3/4X7,Pk5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 7 in, Max. Work Thickness 1/4 in, Thread Length 2 in, Thread Size 3/4 In.-10, Min.
• Box of 10 ITW Red Head ZP LDT-3444 Anchor 3/4" x 4-1/2" Hex Washer Head - New - Outer box is distressed. See pictures.
• Zoro Select B70420.050.0275 Wedge Anchor,Ss,303 And 304,Plain,Pk130 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 2 3/4 in, Max. Work Thickness 1/8 in, Thread Length 1 in, Thread Size 1/2 In.-13, Min.
• Red Head 10-Pack 6-in x 5/8-in Wedge Anchors - Red Head 10-Pack 6-in x 5/8-in Wedge Anchors.
• NEW BOX OF 10 RED HEAD WEDGE ANCHOR 5/8" x 5 - NEW BOX OF 10 RED HEAD WEDGE ANCHOR 5/8" x 5.
• Wedge Anchors Zinc Plated Steel 1" x 12" 5150-42025 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Lot Of 9, 3/4" x 7" Stainless Steel Wedge Anchors, no washers/nuts - Lot Of 9, 3/4" x 7" Stainless Steel Wedge Anchors, no washers/nuts. You are buying what is in the photos.
• Dewalt Hangermate Wood PFM2251100 Wood Driver Box Of 25 2" Shank Steel Zinc Pltd
• (6) Concrete Wedge Anchor Bolts 1/2 x 10 no nuts or washers - ACCEPTED BACK UNDER ANY CIRCUMSTANCE.
• 1/2” x 6” concrete anchors - 1/2” x 6” concrete anchors. Brand new in the box, 4 per bag and there is 2 bags this listing is for both bags
• 1/2” x 8-1/2” Concrete anchors - 1/2” x 8-1/2” Concrete anchors. New bag of zinc coated anchors 8 anchors in the bag, only 1 bag
• Hilti 282535 Concrete Anchors, 3/4"x4-3/4", 2 Boxes of 10 Each
• NIUBEE stand off mounting anchors 5/8” x 1” (4 ct) NEW FREE SHIP! - NIUBEE stand off mounting anchors 5/8” x 1” (4 ct) NEW. Condition is New. Shipped with USPS First Class Package.
• (10) WEJ-IT AT3452F Concrete Wedge Anchor Bolt 3/4" x 5-1/2 ANKR-TITE Galvanized - (10) WEJ-IT AT3452F Concrete Wedge Anchor Bolt 3/4" x 5-1/2 ANKR-TITE Galvanized. Box of 14
• 60PK MKT Fastening 3/8 in X 3 in L Wedge Anchor, Zinc Plated, 2638300 - 60 TOTAL 60PK MKT Fastening 3/8 in X 3 in L Wedge Anchor, Zinc Plated, 2638300. MKT FASTENING Wedge Anchor: Steel, Zinc Plated, 3/8 in Anchor Dia., 3 in Anchor Lg, Grade 2, 20 PK
• Hillman Lag Shield Anchors 100 PK 1/4" Short 370204 1/2" Drill Hole Medium Duty - Hillman Lag Shield Anchors 100 PK 1/4" Short 370204 1/2" Drill Hole Medium Duty.
• 6 large concrete wedge anchors 5" long x 5/8" in diameter - New Old Stock - 6 Concrete Wedge Screw Anchors. 5/8" & 5" Wedge Anchors.
• Red head true bolt wedge anchor WW – 3446 concrete anchors 3/4 10 fasteners - Red head true bolt wedge anchor WW – 3446. Open box full 10 pieces true bolt wedge anchor three-quarter by four and three-quarter stainless steel complete set open box sold as is no returns
• Concrete Anchors 1/2" x 7" Cobra 504G Parawedge - 6 Pack Thrulok Fasten Master T - Concrete Anchors 1/2" x 7" Cobra 504G Parawedge - 6 Pack Thrulok Fasten Master G. You get everything you see in photos. A couple of them are dusty. Only 4 washers are included, as seen in photos. Thanks for looking!
• Mkt Fastening M16110301 Wedge Anchor Stud,M8,90Mm,Pk10 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 12 mm, Anchor Length 90 mm, Max. Work Thickness 10 mm, Thread Size M8, Min. MKT FASTENING.
• mkt sup-r-stud 21u945 20pk icc-esr 3782 - mkt sup-r-stud 21u945 20pk icc-esr 3782.
• Lot Of 10 Wej-It 4B High Performance Ankr-Tite Wedge Anchors - THIS SALE IS FOR.
• Powers Wedge Bolt Anchor 1/2”x 4'' 7246 50/box - Powers Wedge Bolt Anchor 1/2”x 4”. Item #7246. 50 anchors per box. The Wedge Bolt anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The Wedge Bolt has many features and benefits that make it well suited for many applications in a variety of base materials. The anchor is designed for consistent and reliable performance in cracked and uncracked concrete. For use in base material :Normal-Weight Concrete Structural Sand-Lightweight Concrete Concrete over Metal Decking Grouted CMUEmail any questions. Thanks for looking.
• Powers Wedge Bolt Anchor 1/4'' x 3'' 7210 100/box - Powers Wedge Bolt Anchor 1/4'' x 3''. Item #7210 100 anchors per box. The Wedge Bolt anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable. The Wedge Bolt has many features and benefits that make it well suited for many applications in a variety of base materials. The anchor is designed for consistent and reliable performance in cracked and uncracked concrete. For use in base material :Normal-Weight Concrete Structural Sand-Lightweight Concrete Concrete over Metal Decking Grouted CMUEmail any questions. Thanks for looking.
• Hilti Kh- Ez 1/4 X 3" - Hilti Kh- Ez 1/4 X 3".
• (25-Pk) Powers Calk-In Machine Bolt Anchors #10-24 40242-PWR - (25-Pk) Powers Calk-In Machine Bolt Anchors #10-24 40242-PWR Antimonial Lead Alloy Calking Sleeve and Zamac Alloy Expander Cone. The product image is the actual item you will receive including all contents unless otherwise noted.
• 1/2” X 4” Sleeve Anchors - 1/2” X 4” Sleeve Anchors. Qty 50 - 1000These anchors were provided by the manufacturer of very expensive, high-tech equipment we installed in McDonald’s restaurants. We ended up using a different size anchor (smaller). I will be glad to send you a sample.Price includes shipping. I will box and ship.
• (25-Pk) Wedge Anchor Zinc Plated 5/8"-11 X 4-1/2" - Pictured Item Only - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted. We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Dewalt LOK-BOLT AS Carbon Steel / Rod Hanger 05825S, 25pc Per Box. - DEWALT 05825S LOK-BOLT AS 25pc per box.
• DEWALT 05815S LOK-BOLT AS 3/8"ANSI, 1-5/8MIN, 18FT-LBS 50pcs Per Box. - DEWALT 05815S LOK-BOLT AS 3/8"ANSI, 1-5/8MIN, 18FT-LBS 50pcs Per Box.
• 1/2 x 10 wej-it® Wedge Anchors 316 Stainless Steel. Box of 10 - 1/2 x 10 wej-it® Wedge Anchors 316 Stainless Steel. Increase response in lighter concrete. Supports clip when anchor is under strain. Enlarged dimples on clip. Reduce slip.
• (25) Sammys 3/8-16 x 1-3/4 Threaded Rod Hanger for Concrete 8059957 - (25) Sammys 3/8-16 x 1-3/4 Threaded Rod Hanger for Concrete 8059957. This auction is for 1 pack of 25 concrete Sammy’s .. 3/8 inch threaded rod . I have multiple packs available.
• Zoro Select U70420.075.0475 Wedge Anchor,3/4",4-3/4",303/304,Pk2 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 4 3/4 in, Max. Work Thickness 1 in, Thread Length 2 1/4 in, Thread Size 3/4 In.-10, Min.
• Hilti KH-EZ 3/8 X 1-7/8" Qty-50 - Hilti KH-EZ 3/8 X 1-7/8" Qty-50.
• Mkt Fastening 1711Ss0 Sleeve Anchor, 5/16 X 2-1/2In, Pk10 - Sleeve Anchor, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 5/16 in, Anchor Length 2 1/2 in, Thread Size 1/4-20, Max. Work Thickness 1 3/8 in, Min. MKT FASTENING. & Recepticles.
• Concrete Anchor Eyelet 1/2" - 13 x 1-1/4" - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Hilti Kwik Cast Short Plate 3/8" & 1/2" & 5/8" KCM-MD - Hilti Kwik Cast Short Plate 3/8" & 1/2" & 5/8" KCM-MD. The product image is the actual item you will receive including all contents unless otherwise noted. We are not an authorized dealer of this product.
• (148-Pk) Concrete Anchor Sleeve Galvanized 1/2-13-In x 1/2-In x 2-In ADI-SS-12 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Concrete Ferrule Zinc 3/4" - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• LOT OF 19 ~ Hilti Drop-In Concrete Anchors 1/2" HDI (19 pcs) 457549 SAE 1110M
• Simpson Strong-Tie Dia37 Drop-In Anchor 3/8 -16 (30Pcs) - LOT 33289 G121.
• hilti kcm- md long plate - hilti kcm- md long plate. we have about 200, retail is around $1,600 make me an offer pickup or delivery
• Forway 1/2" Expansion Concrete Anchor Od 7/8" Id 9/16" 11080Mc (Lot Of 4) - CODE NO. 11080MC. FORWAY -EXPANSION CONCRETE ANCHOR. aucCounter span:hover { text-decoration:underline; }. aucHiddenCounter { display:none; }. aucCounterOrangeText { color:#FB6D05; font-family:Arial; Font-size:13px; Font-weight:bold; }.
• Simpson Strong-Tie ATS7517 Acrylic Tie Screen Tube 3/4" x 17" Qty:25 - Selling a box of brand new Simpson Strong-Tie anchors. They are model ATS7517 Acrylic Tie Screen Tube 3/4" x 17" in package on 25. 
• Hilti KH-EZ 1/4x2 5/8" 100ct - Hilti KH-EZ 1/4x2 5/8" 100ct.
• 3/8-16 X 2-1/4 Concrete Wedge Anchors Zinc Plated Select Qty - Type Wedge Anchor. Finish Zinc.
• 1/4-20 X 1-3/4" Concrete Wedge Anchors Yellow Zinc Astm F1941 Select Qty - ICC Approved for Uncracked Concrete No. ICC Approved for Cracked Concrete No. Application Concrete Anchoring. Type Wedge Anchor. Finish Yellow Zinc. Material Steel.
• 1/2x4 1/2 concrete wedge anchor (44 Pack) - 1/2x4 1/2 concrete wedge anchor (44 Pack).
• Zoro Select 38Dwg Wedge Anchor,Masonry,3/8-16X2-3/8In,Pk4 - Female Wedge Anchor, Steel, Anchor Dia. 1/2 in, Anchor Length 2 3/8 in, Thread Length 7/8 in, Thread Size 3/8 In.-16, Min. 3,600 lb, Ultimate Tension (Lbs.). ZORO SELECT. General Purpose. & Recepticles.
• Powers Fasteners 7423SD1-PWR Power-Stud+ SD1 Wedge Anchors, 1/2" x 4-1/2", 50Pk - Model POWR 7423SD1. • (50) Power-Stud+ SD1 Strength Wedge Anchors, 1/2" x 4-1/2". The anchor is manufactured with a zinc plated carbon steel body and expansion clip for prem. • Type: Wedge Expansion Anchor.
• Powers Fasteners 7416SD2-PWR 3/8" X 5" Power-Stud+ Wedge Anchor 50Pk - Model POWR 7416SD2. • (50) Wedge Expansion Anchors. • Anchor can be installed thro. • Evaluated and qualified by an accredited independent testing laboratory for recognition in cracked and uncracked concrete including seismic and wind loading (Category 1 anchors).
• Powers Fasteners 6403SD-PWR Snake and 1/2" Internal Thread, 50 Per Box - Model POWR 6403SD. The Snake+ anchor is an internally threaded, self-tapping screw anchor designed for performance in cracked and uncracked concrete. The Snake+ screw anchor is installed with a power tool and a Snake+ setting tool.
• Powers Fasteners 6401SD-PWR 3/8"Snake Screw Drop Anchor - Model POWR 6401SD. This Snake+ anchor from Powers Fasteners is an internally threaded, self-tapping screw anchor designed for performance in cracked and uncracked concrete. The anchor is installed into a drilled hole with a power tool and a Snake+ setting tool.
• Powers Fasteners 6400SD-PWR Snake and 1/4" Internal Thread, 100 Per Box - Model POWR 6400SD. • (100) Snake and 1/4" Internal Thread. The Snake+ anchor is an internally threaded, self-tapping screw anchor designed for performance in cracked and uncracked concrete. Suitable base materials include normal-weigh.
• 1/2"x 7" Concrete Wedge Stud Anchor 304 Stainless (100 /box) - Powers  Power Stud 304 Stainless Anchors  1/2" x 7"  (100 /box)
• RED HEAD 3/8” X 3 3/4” Steel Expansion Wedge Anchors 50 Pack #11270 - RED HEAD 3/8” X 3 3/4” Steel Expansion Wedge Anchors 50 Pack. They are all there.
• (10-Pk) Wedge Anchor Zinc Plated Steel 1/2" x 4-1/4" 31JP19 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• 21 CONCRETE EDGE ANCHOR BOLTS, EACH WITH 2 WASHERS & 2 NUTS; (6) 5" and (15) 4" - 21 CONCRETE EDGE ANCHOR BOLTS. SIX ARE 5" IN LENGTH and FIFTEEN ARE 4" IN LENGTH.
• RED HEAD 3/8” X 3” Wedge Anchors 50 Pack - Anchors are not Used, but box has been opened. See pictures for better details & conditions.
• Powers Fasteners 7448SD2-PWR Power-Stud+ Sd23/4 X 8-1/2 - Model POWR 7448SD2. • Consistent performance in high and low strength concrete. • (10) Wedge Expansion Anchors. Product Details. • International Code Council, Evaluation Service (ICC-ES), ESR-2502 for cracked and uncracked concrete.
• (50-Pk) MKT Fastening Drop-In Anchor No-Flange 1/2" x 2" 1312000 - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted. We are not an authorized dealer of this product. This product has no manufacturers warranty.
• NEW Power Fasteners Power-Stud Plus SD1 Wedge Anchors 1/2" x 4-1/2" 25 PCS - 100% Genuine U S A S E L L E R.
• 5 Pk - 316 Stainless Grade 3/8"x 2-1/4" Concrete Wedge Anchor See Desc for deal - Quantity of 5 - 3/8" x 2-1/4" Concrete Wedge Anchor Stainless GRADE 316. Note: the Anchor, Washer, Nut, and Acorn Nut are all stamped with Grade 316, see pictures.
• Box Of 10 Powers 06312 3/4in Drop-in Internal Plug Threaded Anchor - Ball Valves. Fuse Holder. Globe Valves. Circuit Breakers. Plug Valves. Pneumatic Exhaust Valves. Tool Storage. Safety and Security.
• 24ct Sammys 8009925 Threaded Rod Hanger For Wood 2-1/2" Sammy For 3/8" Rod - 24ct Sammys 8009925 Threaded Rod Hanger For Wood 2-1/2" Sammy For 3/8" Rod. Thanks for looking
• DeWalt Power-Stud Wedge Expansion Anchor Carbon Steel 5/8" x 6" 37423 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• 5/8" x 6" Concrete Wedge Anchor Zinc Simpson Strong-Tie WA62600 (10) - 13 pcs. SIMPSON Strong Tie Wedge-All Wedge Anchor 5/8"x6" WA62600.
• 25- HILLMAN 260324 1/2" X 6" L Anchor Bolts, Nuts & Washers, Concrete
• (QTY 25) 1/2-13 x 2 3/4" Concrete Wedge Anchor
• (QTY 10) 1/2-13 x 2 3/4" Concrete Wedge Anchor - (10) 1/2-13 x 2 3/4" Concrete Wedge Anchor.
• Wedge Anchors Full Thread Zinc Plated 3/8" X 5" W38500 - Missing Washers - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
• Tie Wire Split Drive Anchor Zinc Plated 1/4" x 1-3/4" 1089001 - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• (2-Pk) Carbon Steel Drop-In Anchor Zinc Plated - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
• Red Head Non-Flange Drop-In Anchor 3/4"-10 x 3-3/16" x 1-1/4" Dia RL-34 - Red Head Non-Flange Drop-In Anchor 3/4"-10 Thread x 3-3/16" Length x 1-1/4" Dia RL-34. We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted.
• Red Head WS-1236 1/2" x 3-3/4" Concrete Wedge Anchors (13 Count) - You are purchasing 13 bolts with nuts and washers.
• (10-Pk) MKT Fastening Steel Wedge Anchor Zinc Plated 1/2" Dia. x 5-1/2" 2612512 - (10-Pk) MKT Fastening Steel Wedge Anchor Zinc Plated 1/2" Dia. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Rod Anchor Kit 3/4" ABKIT34 - The product image is the actual item you will receive including all contents unless otherwise noted. We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Confast Carbon Steel Flat Phillips Sleeve Anchor Zinc Plated 3/8" x 5" - SAFP385 - We are not an authorized dealer of this product. This product has no manufacturers warranty.
• (5-Pk) MKT Fastening Steel Wedge Anchor Zinc Plated 3/4" x 7" 2634700 - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Concrete Wedge Anchor 3/8"-16 x 1" - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• (10-Pk) Wedge Style Expansion Anchors 1/2" x 4-1/2" 38412 - We will take care of you! The product image is the actual item you will receive including all contents unless otherwise noted. We are not an authorized dealer of this product. This product has no manufacturers warranty.
• DeWalt Wedge Expansion Anchor Carbon Steel 3/4" x 7" 7446SD1-PWR - No Nuts - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• (4 Pk) Cable Anchors/Tighteners 5/8"-11 x 11" Long - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• Wedge Anchor Zinc Plated 1-1/4" x 12" - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
• (45pc) 3" Anchors 1/4" Stainless Steel Concrete Masonry Expansion Anchors - (45pc) 3" Anchors 1/4" Stainless Steel Concrete Masonry Expansion Anchors.
• Wej-it 5/8" x 6" Expanding Wedge Concrete Anchors Lot Of 9 - Warehouse Location: S4405. Prefer to pick it up yourself?. To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly. Country of Manufacture: USA.
• 5PK MKT Fastening 1" X 9" Wedge Anchor Gr 5 *SEE THREAD LENGHT DIFFRNC - *SET OF 5 WITH DIFFERENT THREADED LENGTH* 2 THREADED 4" 3 THREADED 2 1/4" PLEASE SEE PICTURES FOR DETAILS New 5PK MKT Fastening 2519000 Wedge Anchor,Gr 5,1 X 9 In, *SEE THREAD LENGHT DIFFRNC.
• Simpson Strong-Tie Titen Heavy Duty Screw Anchor 100PK 1/4" x 1-7/8" THDB25178H - Simpson Strong-Tie Titen Heavy Duty Screw Anchor 100PK 1/4" x 1-7/8" THDB25178H.
• Dewalt 05815S Lok-Bolt As 3/8"Ansi, 1-5/8Min, 18Ft-Lbs Max Lot Of 50
• Wej-it 3850 Original Zinc Plated Wedge Anchors 3/8in. x 5in. 30CT - Our Hours Of Operation.
• Mkt Fastening 2712334 Wedge Anchor,303/304 Ss,1/2X3 3/4,Pk10 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 3 3/4 in, Max. Work Thickness 1 1/2 in, Thread Length 2 1/2 in, Thread Size 1/2 In.-13, Min.
• Mkt Fastening 2112412 Seismic Wedge Anchor,1/2X4 1/2,Pk10 - Seismic Wedge Anchor, Seismic Approved Yes, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 1/2 in, Anchor Length 4 1/2 in, Max. Work Thickness 1 in, Thread Length 1 1/2 in, Thread Size 1/2 In.-13, Min.
• Mkt Fastening 2812512 Wedge Anchor,Galv. Steel, 1/2X5 1/2,Pk10 - MKT FASTENING 2812512 Wedge Anchor,Galv. Steel, 1/2x5 1/2,PK10. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 1/2 in, Anchor Length 5 1/2 in, Max. Work Thickness 3 1/4 in, Thread Length 4 in, Thread Size 1/2 In.-13, Min.
• Mkt Fastening 2512414 Wedge Anchor,Gr 5,1/2 X4 1/4,Pk50 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 1/2 in, Anchor Length 4 1/4 in, Max. Work Thickness 1 1/2 in, Thread Length 3 in, Thread Size 1/2 In.-13, Min.
• Mkt Fastening 1724000 Sleeve Anchor, 5/8 X 3In, Pk5 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 3 in, Thread Size 1/2-13, Max. Work Thickness 1 in, Min. MKT FASTENING. & Recepticles.
• Mkt Fastening 1795000 Sleeve Anchor, 3/8 X 2-1/2In, Pk25 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 2 1/2 in, Thread Size 5/16-18, Max. Work Thickness 1 1/2 in, Min. MKT FASTENING. & Recepticles.
• Mkt Fastening 1719000 Sleeve Anchor, 5/8 X 4-1/4In, Pk5 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 4 1/4 in, Thread Size 1/2-13, Max. Work Thickness 2 1/4 in, Min. MKT FASTENING. & Recepticles.
• Mkt Fastening 1766000 Sleeve Anchor, 1/4 X 3In, Pk50 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 3 in, Thread Size 3/16-24, Max. Work Thickness 2 in, Min. MKT FASTENING. & Recepticles.
• Hilti HDI-SS 3/4 Drop-In Anchors for Concrete lot of 5pcs
• (4) 3/4-10 Machine Screw Caulk-in Anchors Expansion Internally Threaded Masonry - ( (50) 1/4 _20 Machine Screw Expansion Anchors Expansion Internally Threaded Masonry.
• 50PK DEWALT 3/8" x 4" Sleeve Anchor: LOK-BOLT AS, Steel, Zinc Plated, 05022S-PWR - New without original packaging. 50PK DEWALT 3/8" x 4" Sleeve Anchor: LOK-BOLT AS, Steel, Zinc Plated, 05022S-PWR.
• FIFTY !! 3/8 x 6 Flat Head Zinc Plated Sleeve Anchors - 50 anchors
• FIFTY !! 1/4 x 2-1/4 Wedge Anchors - 50 anchors
• Confast WA127 , 1/2" x 7" Wedge Anchor Carbon Steel Zinc Plated (Box 25) - Type - 1/2" x 7" Wedge Anchor Carbon Steel Zinc Plated (Box 25).
• Us Anchor Sleeve Anchors 3/4 X 4-1/4 Sh3442 Box Of 5 - SLEEVE ANCHORS. ANCHOR SIZE. NEW IN OPEN BOX. GREAT CONDITION. 3/4 X 4-1/4.
• ULINE H-2121, Floor Anchor Kit, Concrete Installation Kit for Safety Guards, 4 - ULINE H-2121, Floor Anchor Kit, Concrete Installation Kit for Safety Guards, 4. Price per box of four
• Hilti KH-EZ 1/4 x 1 7/8 Screw Anchor - 10 pieces
• Cobra Parawedge Concrete Anchors 1/2" X 3-3/4" 501T25 3000 PSI Max 24 Pack - Cobra Parawedge Concrete Anchors 1/2" X 3-3/4" 501T25 3000 PSI Max 24 Pack. Open box. 24 unitsPlease make sure this item works for your application and ask all questions before buying. All sales final. Thank you.
• Red Head 50097 Heavy Duty Wedge Anchor 1/2'' X 5-1/2-Inch
• Dewalt Hangermate Wood Rod Hanger Anchor 2 Shank PFM2251100
• Pack of 50 Dewalt 7413SD1 Concrete Wedge Anchor SDI 3/8 x 3-Inch js - Pack of 50 Dewalt 7413SD1 Concrete Wedge Anchor SDI 3/8 x 3-Inch js.
• *Red Head Sleeve Anchors 3/8” x 3” qty 15
• 5/16-18 X 8-5/8 J-Bolt Battery Hold Down, QTY-10 - MATERIAL ZINC PHOSPHATE AND OIL.
• 25PK Dewalt Powers Fasteners 1/2" x 3" Carbon Steel Sleeve Expansion Anchors - 25PK Dewalt Powers Fasteners 1/2" x 3" Carbon Steel Sleeve Expansion Anchors. Sleeve Anchor: Steel, Not Graded, Zinc Plated, 1/2 in Anchor Dia., 3 in Anchor Lg, 25 PK
• BOX OF 15 - HILTI 5/8" x 7" Kwik Bolt 1 Carbon Steel Zinc Plated Concrete Anchor
• 1/2'' x 4-1/2'' 5 PCs Wedge Concrete Wall Anchors Bolt Zinc Plated Heavy Duty... - 1/2" x 4-1/2" 5 PCs Wedge Concrete Wall Anchors Bolt Zinc Plated Heavy Duty Fastener for Concrete (1/2" x 4-1/2", 5). Material: Made of carbon steel & zinc plated surface for corrosion resistant. If you did not receive our reply.
• 1/2'' x 7'' 5 PCs Wedge Concrete Wall Anchors Bolt Zinc Plated Heavy Duty Fas... - 1/2" x 7" 5 PCs Wedge Concrete Wall Anchors Bolt Zinc Plated Heavy Duty Fastener for Concrete (1/2" x 7", 5). Material: Made of carbon steel & zinc plated surface for corrosion resistant. If you did not receive our reply.
• Zoro Select U70411.087.1000 Wedge Anchor,7/8",10",Zp Carbon Stl,Pk2 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 7/8 in, Anchor Length 10 in, Max. Work Thickness 3 1/8 in, Thread Length 3 7/8 in, Thread Size 7/8 In.-9, Min.
• 12 ea. 1/2" x 6" Masonry Structural Wedge/Sleeve Anchors - 12 ea. 1/2" x 6" Masonry Structural Wedge/Sleeve AnchorsAB
• Box of 20 MKT SZ HighLOoad Anchor SZ-3 18/40 M16325301
• Qty 3 3/4" X 5 1/2" Concrete Anchor Wedge Bolts Free Shipping - QTY 3 3/4" X 5 1/2" CONCRETE ANCHOR WEDGE BOLTS. New, unused. This product has never been put into service.
• Red Head Ws-3870 3/8 X 7" Wedge Anchor, Trubolt Concrete Anchoring (Lot Of 46)
• ITW® - 1/2"-Drop In Multi-Set® Anchor-Concrete Setting Tools - Manufacturer ITW. Anchor is properly expanded when shoulder of setting tool is flush with top of anchor. Typical application of this tool is for HVAC and fire sprinkler use. To set an anchor below surface, drill a hole deeper than anchor length.
• Ramset Trubolt Red Head Wedge Anchors 3 3/4 inch - Ramset Trubolt Red Head Wedge Anchors 3 3/4 inch. Dated 1989. Excellent quality.  This is a partial box with 20+ left in the box.  Stainless steel
• (Qty.50) Red Head 3/8" X 5" WW-3850 Wedge Anchor 304 Stainless Steel 3/8-16 USA
• Quantity 15 STRIKE ANCHOR 3/4 X 6 by HILLMAN Part No 375679 FREE SHIPPING NEW - Quantity 15 STRIKE ANCHOR 3/4 X 6 by HILLMAN MfrPartNo 375679 FREE SHIPPING NEW.
• 20 1/2x3 3/4 hilti concrete anchors - 20 1/2x3 3/4 hilti concrete anchors. New in box.
• 43PK DEWALT Wedge Anchor 1/2 in Dia. X 3 3/4 in Lg, Stainless Steel - New without original packaging. 43PK DEWALT Wedge Anchor 1/2 in Dia. X 3 3/4 in Lg, Stainless Steel. Wedge Anchor: Stainless Steel, Stainless Steel, 1/2 in Anchor Dia., 3 3/4 in Anchor Lg
• (3) - 1/2" Zinc-Plated Steel Drop-In Anchor Set Tool - The Drop-In Anchor Setting Tool is a necessary accessory for setting Drop-In Anchors. Read installation instructions carefully. Anchor is properly expanded when shoulder of setting tool is flush with top of anchor.
• (3) - 3/8" Zinc-Plated Steel Drop-In Anchor Set Tool - The Drop-In Anchor Setting Tool is a necessary accessory for setting Drop-In Anchors. Read installation instructions carefully. Anchor is properly expanded when shoulder of setting tool is flush with top of anchor.
• *LOT OF 11*- Hilti Kwik Cast KCM-MD Short Plate 3/8-Inch & 1/2-Inch & 5/8-Inch
• Countersunk Screw Anchor M6 (6mm) x 50mm Zinc Yellow Masonry XBolt Qty 20 - Masonry Screw Xbolt Countersunk Head Zinc Yellow. Head Style Countersunk. Type Masonry Screw Anchor. Masonry screw anchors are quick to install and fully removable. Can be used in concrete, solid masonry and stone.
• Hilti 00045369 Kwik Bolt 1/2 X 5-1/2in Concrete Anchor Qty 25 New In Box d13 - Hilti 00045369 Kwik Bolt 1/2 X 5-1/2in Concrete Anchor Qty 25 New In Factory Box
• Mkt Fastening 2878100 Wedge Anchor,Galv. Steel, 7/8X10,Pk4 - MKT FASTENING 2878100 Wedge Anchor,Galv. Steel, 7/8x10,PK4. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 7/8 in, Anchor Length 10 in, Max. Work Thickness 6 in, Thread Length 4 in, Thread Size 7/8 In.-9, Min.
• Zoro Select U09100.025.0250 Sleeve Anchr,Hex,Cst,1/4In,2-1/2In,Pk100 - ZORO SELECT. Ak 50200 Wall-Mnt Holder,2Comp,4-13/16X8x3-1/4In. Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 2 1/2 in, Thread Size 10, Min.
• 1/2" Zinc Plated Steel Double Expansion Shields Lot Of 35 - 1/2" Zinc Plated Steel Double Expansion Shields Lot Of 35.
• 20 PACK MKT Fastening 3/8" X 3" Wedge Anchor, Galvanized Steel,, 2838300 - New open package. 20 PACK MKT Fastening 3/8" X 3" Wedge Anchor, Galvanized Steel,, 2838300. Wedge Anchor: Steel, Galvanized, 3/8 in Anchor Dia., 3 in Anchor Lg, 20 PK
• Red Head Trubolt SWW-5842 Trubolt Wedge Anchor 316 Stainless Steel 5/8" x 4-1/4" - (MWBAY1CAGE1X2+1BOXOF12)(JL).
• 10 - Jones Stephens JH96869 White 8mm Plastic Anchor 50 Pack (500) - 10 - Jones Stephens JH96869 White 8mm Plastic Anchor 50 Pack (500).
• 🆕️ *BOX OF 25* Power Bull Anchor Wedge Anchors 1/2 X 5-1/2 Part 09047 Zinc 🇺🇸 - Doing the right thing matters to us! ● Handled with care quickly! Ready to be put to work! Don't sacrifice quality. Get great parts at a great deal! WE RESPOND FAST! Local pick-up is always an option.
• ITW Red Head WS-3484 Trubolt Wedge Anchor 3/4" x 8-1/2" New Box of 12 - (MWBAY1CAGE1-CX1+1 MISSING NUT)(JL).
• ITW Red Head WS-78100 Trubolt Carbon Wedge Anchor  - ITW Red Head WS-78100 ITW Redhead Trubolt Carbon Wedge Anchor 7/8" x 10"
• Powers Hex Head as All Steel Sleeve Anchors Lokbolt 3/8" x 5" 05350S 50-Pack - Powers Hex Head as All Steel Sleeve Anchors Lokbolt 3/8" x 5" 05350S 50-Pack.
• Brady 97084 Anchor Kit,Spring Steel,Pk5 - Zoro Select U07000.075.0950 3/4"-10 Socket Head Cap Screw, Black Oxide Steel. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
• Global Industrial Hex Nut Sleeve Anchor, 3/4" x 4-1/4" - Global Industrial Hex Nut Sleeve Anchor, 3/4" x 4-1/4".
• 25 PK Dewalt Engineered By Powers Double Sheild Expansion Anchors 5/8" 09530-PWR - Location FC33-225 PK Dewalt Engineered By Powers Double Sheild Expansion Anchors 5/8" 09530-PWR.Expansion Anchor: 5/8 in Anchor Internal Thread Dia., 2 3/4 in Anchor Lg, 25 PK
• 1 1/4” Diameter X 9” Long Concrete Stud Anchor Stainless Steel Grade 316 - 1 1/4” Diameter X 9” Long Concrete Stud Anchor Stainless Steel Grade 316.
• Sammys 3/8-16 x 2 Threaded Rod Hanger for Steel 8042957 Self-Drilling box of 15 - Box of 15 Sammys 8042957. 2" sammy for 3/8" Rod.
• (25) Sammys 3/8-16 x 2 Threaded Rod Hanger for Steel 8042957 Self-Drilling - Box of 25 Sammys 8042957. 2" sammy for 3/8" Rod.
• Hilti 2004154 HSA Wedge Anchor M12x85 5/-/- BOX OF 25 - If you are not able to pick up locally, we are able to get competitive freight quotes as well.
• Mkt Fastening 1723000 Sleeve Anchor, 3/4 X 6-1/4In, Pk5 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/4 in, Anchor Length 6 1/4 in, Thread Size 5/8-11, Max. Work Thickness 4 1/4 in, Min. MKT FASTENING. Crc 03054 Lubricant, Aerosol Can, 16 Oz.
• MKT FASTENING Wedge Anchor, Zinc Plated, 3/8x5, PK20 2638500 - Wedge Anchor Type : Wedge Anchor. Fastener Finish : Zinc Plated. Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 5 in, Max.
• (16-Pk) Red Head Sleeve Anchors Hex Head 1/2 x 4" 11285 - No box new anchors.
• Simpson Strong-Tie Titen Heavy Duty Screw Anchor 20PK 1/4" X 4" 20 pieces - Titen HD heavy Duty screw Anchor 1/4" X 4 there is only 20 pieces
• 200 count Zip-It ( 1/2 x 1-5/8 ) Metal Drywall EZ Anchors - 200 count Zip-It ( 1/2 x 1-5/8 ) Metal Drywall EZ Anchors.
• Mkt Fastening 2534512 Wedge Anchor,Gr 5,3/4 X5 1/2,Pk20 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/4 in, Anchor Length 5 1/2 in, Max. Work Thickness 1 3/8 in, Thread Length 3 5/8 in, Thread Size 3/4 In.-10, Min.
• 5/16"-18 x 2-3/4" Zinc Concrete Wedge Stud Anchor Bolts WAS-300 (50 pcs.)
• Simpson Strong-Tie Titen Heavy Duty Screw Anchor 48PK 1/4" x 1-7/8" THDB25178H - Titen HD heavy Duty screw Anchor 1/4" X 1-7/8 there is only 87 pieces!
• Simpson Strong-Tie Titen Heavy Duty Screw Anchor 87PK 1/4" x 1-7/8" THDB25178H - Titen HD heavy Duty screw Anchor 1/4" X 1-7/8 there is only 87 pieces!
• Hilti 2018455 Hit-Z-R 1/2 X 6-1/2, 316 Ss, X 20Each, Anchor Bolts, Nut & Washer - 20 X NUT # 2018361. 20 X WASHER # 2018349.
• Red Head Wedge Anchor WS-1416, 1/4" x 1 3/4" Zinc Plated Anchor 100 Each - Red Head Wedge Anchor WS-1416, 1/4" x 1 3/4" Zinc Plated Anchor 100 Each.
• Foldable Anchor Grapnel 4 Flukes 1.5kg Carbon Steel Anchor Grapnel For Kayak - Feature: 1. With 4 Flukes: Has 4 anchor flukes, which can firmly hold the boat in water by fixing in the soil, sand and rocks. Item Type: Foldable Anchor. Practical Use: Designed for sail boats, kayaks, jet skis, canoes, small water vehicles and so on, very practical.
• Mkt Fastening 2534434 Wedge Anchor,Gr 5,3/4 X4 3/4,Pk25 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/4 in, Anchor Length 4 3/4 in, Max. Work Thickness 5/8 in, Thread Length 2 7/8 in, Thread Size 3/4 In.-10, Min.
• (ct 25) Fastenal 3/4 - 10 Carbon Steel Zinc Plated Drop In Anchor - (ct 25) Fastenal 3/4 - 10 Carbon Steel Zinc Plated Drop In Anchor. 1 purchase will get you 25 each new 3/4”-10 carbon steel zinc plated drop in anchors
• BOX 15 RED HEAD 3/8" x 3" Hex-Head Sleeve Anchors for Blocks Brick Concrete - BOX 15 RED HEAD 3/8" x 3" Hex-Head Sleeve Anchors for Blocks Brick Concrete. As shown, new open box.i4, bin 25
• Lot Of 10 Dewalt Concrete Anchors 7463Sd1 - 9" X 1" - Se Habla Español. What is displayed in the pictures is what will be sold.
• Box of 20- Hilti Kwik Bolt TZ Expansion Anchor 1/2" x 5-1/2" Carbon Steel 387514 - Condition is "New".
• Redhead Trubolt Anchor Wedge WS-5884 5/8" x 8 1/2" Lot of 5
• Redhead Trubolt wedge Anchor 3/8 " x 5 52008 Lot of 14
• US Anchor DE14 1/4-1 Double Expansion Shield BOX of 100 Pieces - If you are not able to pick up locally, we are able to get competitive freight quotes as well.
• ITW Red Head 11013 - 3/8" x 3" Hex Sleeve Anchor - Pkg of 15 - ITW Red Head 11013 - 3/8" x 3" Hex Sleeve Anchor - Pkg of 15.
• 50 Pack - DEWALT 7415SD1 - POWER-STUD+ Seismic Anchor - 3/8" x 3.75" - Model: 7415SD1.
• Wedge Anchor bolts 3/4" x 5-1/2"
• 220 Heavy Duty Concrete Wedge Anchors 3/8" x 2 1/8" Masonry Hardware
• 65 Heavy Duty Hex Head Concrete Sleeve Anchors 5/8" x 2 1/2" Masonry Hardware
• Lot of 12 Unbranded 3/8" Dia. X 3-1/2" Long Wedge Anchor Bolts New Surplus - X 3-1/2" Long Wedge Anchor Bolts New Surplus.
• Zoro Select B09100.062.0425 Sleeve Anchor,Hex Nut,5/8" Dia.,Pk60 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 5/8 in, Anchor Length 4 1/4 in, Thread Size 1/2, Min. ZORO SELECT. General Purpose. Tapecase 15C677 Squeak Reduction Tape,Black,1In X 5Yd.
• Zoro Select U70420.100.0900 Wedge Anchor,1",9",303/304, - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 1 in, Anchor Length 9 in, Max. Work Thickness 4 in, Thread Length 3 7/8 in, Thread Size 1 In.-8, Min.
• Mkt Fastening 2834414 Wedge Anchor,Galv. Steel, 3/4X4 1/4,Pk5 - MKT FASTENING 2834414 Wedge Anchor,Galv. Steel, 3/4x4 1/4,PK5. Miller Electric 212724 Electrode, For Ice 60T - 100T/Tm, Pk5. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia.
• Simpson Strong-Tie 1/4 x 2 1/4 Strong-Bolt 2 Wedge Anchors lot 17 - List is for one Lot of 17 packs --1--per pack all same 1/4" x 2-1/4" long stocked Bay #3 pallet rack
• (25) Red Head Expansion Wedge Anchors WW-1270, 1/2" x 7", 304 Stainless Steel - Wedge Concrete Anchor. Expansion Wedge. ICC Approved for Un-Cracked Concrete. 304 Stainless Steel. Thread Length 3-1/2 in. Thread Size 1/2"-13. New, never used. Minor wear from storage, including scratches and scuffs.
• (25) Red Head Expansion Wedge Anchors WW-1270, 1/2" x 7", 304 Stainless Steel - Wedge Concrete Anchor. Expansion Wedge. ICC Approved for Un-Cracked Concrete. 304 Stainless Steel. Thread Length 3-1/2 in. Thread Size 1/2"-13. New, never used. Minor wear from storage, including scratches and scuffs.
• (Unit) 10 Piece Fischer Bolts Fbn II 16/160GS 16x280 - Product description           Manufacturer: Fisher Type: FBN II 16/160 GS Designation: Bolt ___ Item condition new, signs of storage on the original packaging scope of delivery 1x Fischer FBN II 16/160 GS, see illustration Customs notice When shipping to non-EU countries, additional taxes or costs (e.g. customs duties) are incurred as part of your order, which we do not pay or cover. shall be invoiced by us, but shall be paid directly by you to the relevant customs or tax authorities. Please contact these authorities for details. y2.
• 1/4" x 1" Power Bull Hammer Drive Zinc Alloy Anchor 100/Box - THEY FEATURE A TAMPER-PROOF MUSHROOM HEAD. SINCE 1988.
• 1/4" x 1" Power Bull Hammer Drive Zinc Alloy Anchor 1000/Box - THEY FEATURE A TAMPER-PROOF MUSHROOM HEAD. SINCE 1988.
• 1/4" x 1-1/4" Power Bull Hammer Drive Zinc Alloy Anchor 1000/Box - THEY FEATURE A TAMPER-PROOF MUSHROOM HEAD. SINCE 1988.
• 1/4" x 1-1/4" Power Bull Hammer Drive Zinc Alloy Anchor 100/Box - THEY FEATURE A TAMPER-PROOF MUSHROOM HEAD. SINCE 1988.
• 1/4" x 1-1/2" Power Bull Hammer Drive Zinc Alloy Anchor 100/Box - THEY FEATURE A TAMPER-PROOF MUSHROOM HEAD. SINCE 1988.
• 1/4" x 1-1/2" Power Bull Hammer Drive Zinc Alloy Anchor 1000/Box - THEY FEATURE A TAMPER-PROOF MUSHROOM HEAD. SINCE 1988.
• Hillman Concrete Sleeve Anchors 1/2" x 6" 935lbs. Drill 1/2". D - Hillman Concrete Sleeve Anchors 1/2" x 6" 935lbs. Drill 1/2". D.
• Mkt Fastening 2634434 Wedge Anchor,Zinc Plated,3/4X4 3/4,Pk5 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/4 in, Anchor Length 4 3/4 in, Max. Work Thickness 1 3/8 in, Thread Length 2 7/8 in, Thread Size 3/4 In.-10, Min.
• ZORO SELECT Sleeve Anchor, Flat, CST, 3/8in, 4in, PK25, U09200.037.0400 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 4 in, Thread Size 5/16, Min. Anchor Material : Steel. Anchor Dia. Anchor Length : 4 in.
• Hilti Kwik Bolt Wedge Anchor 1/2 X 7 W/ Nuts And Washers Carbon Steel Pn 282529 - HILTI KWIK BOLT WEDGE ANCHOR 1/2 X 7 W/ NUTS AND WASHERS CARBON STEEL PN 282529. Purchased and never used. Full unopened box of 25 wedge anchors. Please confirm fitment prior to purchase. Please see detailed pictures and judge condition for yourself prior to purchase...no refunds!
• 3M Rjs-3-4Ft Rejacketing Sleeve 4' Coil, Matallic Shield Diam Rang 0.80-1.02" - NEW 3M RJS-3-4FT - 3/C PHASE REJACKETING SLEEVE 4 FT COIL. These were used during site construction and are no longer needed for inventory. All parts are brand new and have never been used. If you have any questions please message me.
• Hilti 2210254 1/2" x 3-1/4" Kwik Bolt TZ2 Carbon Steel Concrete Anchor 20 Pk
• BAG OF 16 Wedge Anchors 5/8'' x 5'' GRADE 304 Stainless Steel - D104 R BOX.
• 50 New HILTI KWIK BOLT 1/2 X 2-3/4" EXPANSION Steel 5500052 - BOX IS STILL SEALED..   Box has some wear.. 
• TorqMaster 1/2" x 4-1/4" Hot Dipped Galvanized Concrete Wedge Anchors (25 pcs.) - Finish: Hot Dip Galvanized. Style: Concrete. Type: Wedge Anchor. Material: Steel. Thread Size: 13 (Coarse).
• Fischer anchoring epoxy 345 S   360ml
• Aerosmith ANCHOR 045831 1/2"-13x3 3/4" ULTRAWEDGE+ ANCHOR STEEL ZINC BOX OF 50x - Aerosmith 350count . ANCHOR 045831 1/2"-13x2 3/4" ULTRAWEDGE+ ANCHOR STEEL ZINC CR+3 BOX OF 50x.350 to 375 total
• NEW Cobra Parawedge Concrete Anchor w/ Nuts & Washers 3/8" x 3-3/4" 498NS - X 3-3/4 in. Parawedge Anchor 498NS.
• MKT Fastening SUP-R-STUD Wedge Anchor Set 3/4" X 8-1/2" 2634812 14 Pack
• Aerosmith ANCHOR 045831 1/2"-13x3 3/4" ULTRAWEDGE+ ANCHOR STEEL ZINC BOX OF 50x - Aerosmith . ANCHOR 045831 1/2"-13x2 3/4" ULTRAWEDGE+ ANCHOR STEEL ZINC CR+3 BOX OF 50x.
• Powers Lok-Bolt 09403S Sleeve Anchors 3/8" x 4" BOX OF 10 - If you are not able to pick up locally, we are able to get competitive freight quotes as well.
• Mkt Fastening 2834512 Wedge Anchor,Galv. Steel, 3/4X5 1/2,Pk5 - MKT FASTENING 2834512 Wedge Anchor,Galv. Steel, 3/4x5 1/2,PK5. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 3/4 in, Anchor Length 5 1/2 in, Max. Work Thickness 2 1/8 in, Thread Length 3 5/8 in, Thread Size 3/4 In.-10, Min.
• Mkt Fastening 2834614 Wedge Anchor,Galv. Steel, 3/4X6 1/4,Pk5 - MKT FASTENING 2834614 Wedge Anchor,Galv. Steel, 3/4x6 1/4,PK5. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 3/4 in, Anchor Length 6 1/4 in, Max. Work Thickness 2 7/8 in, Thread Length 4 1/4 in, Thread Size 3/4 In.-10, Min.
• NOS Lot of 5 Powers Power-Stud Wedge Anchor 5/8" x 3-1/2" Length - See condition above for more details.
• 1 pcs. ITW Red Head TRUBOLT Wedge Anchor Stainless Steel 1/4 x 2 1/4" WW-1422 - 1 pcs. ITW Red Head TRUBOLT Wedge Anchor Stainless Steel 1/4 x 2 1/4" WW-1422.
• Panduit PNL-8-C 1 Cast Cu Hole Lug - LOT of 4 / NOS - Manufacturer: Panduit. Part Number: PNL-8-C 1.
• Zamac Nailin Drive Pin Anchor (1/4" x 1-1/2") 12pk - Zamac Nailin Drive Pin Anchor (1/4" x 1-1/4"). The Zamac Nailin is a drive anchor that provides a permanent, tamper-proof installation into concrete, block or brick.
• (10) 3/4" X 4" Anchor Bolts - (10) 3/4" X 4" ANCHOR BOLTS. NEW OLD STOCK, NO BOX.
• 5 inch high 3/4 inch bolt, 3/4" throw floor door lock with floor pad New - 5 inch high 3/4 inch bolt, 3/4" throw floor door lock with floor pad New.
• Hilti Stainless Steel Internally Theaded Insert Anchors 1/2"x 5" HIS-RN 258030 - Threaded sleeve HIS-RN 1/2"x5" SS316 #258030. threaded sleeve HIS-RN 1/2"x 5" SS316 #258030. For your consideration a Hilti HIS-RN 1/2"x 5" SS316 #258030box of 5 Anchors. Designed for use in solid concrete with the relevant Hilti HIT adhesive anchoring systems.
• Sammys threaded rod anchoring system 10 included 2 3/4" long never used - Sammys threaded rod anchoring system for concrete. Torx 25 drive 10 included 2 3/4" shutter tapcon.
• Sammys threaded rod anchoring system 25 included 6" long - Sammys threaded rod anchoring system for concrete. New Never used.
• (52) VERTIGO 1/4x 2” Threaded Rod Hanger for Steel Self-Drilling TYPE 17 - (52) VERTIGO 1/4x 2” Threaded Rod Hanger for Steel Self-Drilling TYPE 17.
• Red Head, WS-3454, Wedge Anchor, 3/4 in X 5-1/2 in, 3-1/4 X 6-5/8 in Min Embed, - All parts are NEW/NEVER USED and fully functional. Designed for fastening applications in solid concrete. Corrosion resistant. Anchors are building code approved. From the Manufacturer Dependable, heavy duty, inspectable, wedge type expansion anchor.
• Red Head WS-5850 Trubolt Carbon Steel Wedge 5/8-Inch by 5-Inch Anchor (10 per Bo - All parts are NEW/NEVER USED and fully functional. Made of zinc-plated carbon steel--standard anchor for all structural and in-plant uses. Versatile fully threaded design. One piece stainless steel expander clip resists corrosion.
• Ultrawedge Wedge Anchor-  3/4-10 x 6-1/4", Steel, Zinc, Pkg of 10  - Ultrawedge Wedge Anchor- 3/4-10 x 6-1/4", Steel, Zinc, Pkg of 10.
• Sammys threaded rod anchoring system 17 included 1 3/4" long - Sammys threaded rod anchoring system for concrete. Torx 25 drive 17 included 1 3/4" shutter tapcon.
• WEJ-IT 3/8 x 7" WEDGE ANCHOR ZINC PLATED 50 PACK AT3870 - WEJ-IT 3/8 x 7" WEDGE ANCHOR ZINC PLATED 50 PACK AT3870.
• Box of 25 Powers Fasteners 1/2" x 3" Carbon Steel Sleeve Expansion Anchors - New Box of 25 Powers Fasteners 1/2" x 3" Carbon Steel Sleeve Expansion Anchors.
• Box of 20 COBRA PARASLEEVE Masonary Anchors 5/16"x1-1/2" 2,000 lbs. max. 444M - COBRA PARASLEEVE MASONRY ANCHORS. max., 444M.
• New Lot Of 125 Power Bull Anchor Wedge Anchors 1/2 X 5-1/2 Part 09047 Zinc 🇺🇸 - New Lot Of 125 Power Bull Anchor Wedge Anchors 1/2 X 5-1/2 Part 09047 Zinc 🇺🇸. New box of 125 countLocation MP3JALPsalm 51: Have mercy upon me, O God, according to thy loving kindness, according unto the multitude of thy tender mercies blot out my transgressions.
• Hilti® Expansion Anchors. KB1. 3 Packs Of Two. 2 pks of 5/8"x6. 1 pk 1/2"x7". - Hilti® Expansion Anchors. KB1. 3 Packs Of Two. 2 pks of 5/8"x6. 1 pk 1/2"x7".. Total number of anchors is 6. Please see photos.
• Red Head® Trubolt® Lot Of Wedge Anchors. Description below for sizes/count. 29 - Red Head® Trubolt® Lot Of Wedge Anchors. Total of 30~~ 5~1/2"x7". 7~3/4"x5 1/2". 9~5/8"x7". 2~5/8"x8 1/2". 4~1/2"x5 1/2". 2~1/2"x4 1/4". 1~1/4"X2 1/2".
• DeWALT Wedge Expansion Anchors Power-Stud+ SD1 Fasteners 7402SD1 (100) NEW - DeWALT Wedge Expansion Anchors Power-Stud+ SD1 Fasteners 7402SD1 (100) NEW.
• Werner A51300Xr Removable Concrete Bolt Anchor - ITEM: Concrete bolt anchor.
• (50) DeWalt Powers Expansion Wedge Concrete Anchor 07323, 1/2" x 4-1/2", Steel - DEWALT Wedge Expansion Anchors POWERSTUD 304SS 1/2" X 4 1/2" QTY: 50. It is available in a threaded version suitable for applications in solid concrete and grout-filled concrete masonry. The threaded version is produced in Type 304 and Type 316 stainless steel.
• 3/4 x 7" Concrete Masonry Wedge Anchors Zinc Plated ( 27 pcs. ) New - Material: Carbon Steel, Zinc Plated. Our Ref: Rear Pallet Anchor Shelf, 08-11-22. Quantity: 27 pcs. Size: 3/4" x 7". Condition: New.
• Lot of 2 Boxes STAR Sleeve-Grip Sleeve Anchors 3/8" x 3" Hex Nut 12/Box - Lot of 2 Boxes STAR Sleeve-Grip Sleeve Anchors 3/8" x 3" Hex Nut 12/Box in very good unused condition.  One box is sealed, one box is open.  The open box is missing one washer.  Please see all photos for appearance and condition.
• Dewalt 7424SD2-PWR 1/2 In. X 5-1/2 In. Power-Stud Carbon Steel Wedge Expansi... - Dewalt 7424SD2-PWR 1/2 In. X 5-1/2 In. Power-Stud Carbon Steel Wedge Expansi....
• 5/8 x 3-1/2" Concrete Masonry Wedge Anchors , Carbon Steel 25 pcs. NEW - Quantity: 25 pcs. Our Ref: Rear Pallet Area, 08-11-22. Condition: New, Bulk.
• Hilti Anchor KWIK Bolt 3 Expansion KB3 1/2”’x 3-3/4” LT Qty 69 - Hilti Anchor KWIK Bolt 3 Expansion KB3 1/2”’x 3-3/4” LT Qty 69. New, damaged packing boxes, old stock (1323). B2
• 5/8 x 5" Wedge Anchors Steel Zinc Plated Ultrawedge ( 80 pcs. ) New - Series: Ultrawedge. Style: Wedge Anchor. Quantity: 80 pcs. Size: 5/8" x 5". Condition: New.
• (10 PCS) Blue Wedge Anchors 5/8"-11 x 6", Galvanized, for Concrete, Hot Dipped - Finish: Hot Dip Galvanized. Type: Wedge Anchor. Tightening the bolt results in a wedge being driven up against a sleeve. Material: Steel. Thread Size: 11 (Coarse). Length: 6".
• Sammys 8003957 gst 200 for wood qty 25 per box - Sammys 8003957 gst 200 for wood qty 25 per box.
• (10 PCS) Blue Wedge Anchors 5/8"-11 x 5", Galvanized, for Concrete, Hot Dipped - Finish: Hot Dip Galvanized. Application: Concrete|Stone. Type: Wedge Anchor. Tightening the bolt results in a wedge being driven up against a sleeve. Material: Steel.
• Wej-It 5620 100ct Wedge Anchors - Pick up at our location Greenwich Ohio permitted.
• Hilti 371805 HSL-3-G Wedge Expansion Anchor Size M20/30 Lot of 2 USED - Check-Out Now! Due to the multiple quantities available, you may not receive the item pictured in the ad above. Part Number: HSL-3-G. This item is used and in working condition.
• Hilti 371805 HSL-3-G Wedge Expansion Anchor Size M20/30 2-Pk NOP - Check-Out Now! Due to the multiple quantities available, you may not receive the item pictured in the ad above. Part Number: HSL-3-G. Warranty Policy.
• QTY=150; SUP-R-STUD+ Galvanize 65 Wedge Anchor 1/2"x4-1/4" 2812414MC - See photos. In the event that any clauses or phrases contained here within are ruled out by a judge, the law, a lawyer, jurors, and or any other entity all others remain in effect.
• The Hillman Group 372054 Hammer Drive Anchor, 1/4 x 1-Inch, 100-Pack , zinc - Steel pin. Made from high quality materials and highly durable. Do not use for overhead installation projects. They can be used in base materials such as brick, concrete block and concrete. These are permanent and cannot be removed without destroying.
• Hillman Zamac Nailin Anchor 3/16 " X 7/8 " Steel 100/Box - Die-cast zinc. Steel pin. Steel nail.
• Lot Of 7 At3441G Wedge Anchor 3/4" Carbon Steel - Se Habla Español.
• QTY=300 (3 Box of 100); Red Head Multiset II 3/8" Drop-In Anchor RX-38 - See photos. In the event that any clauses or phrases contained here within are ruled out by a judge, the law, a lawyer, jurors, and or any other entity all others remain in effect. Includes x300 (3 Boxes of 100) what is shown in the picture.
• Wej It Anchor ATG1090 1 x 9 4 Pack
• The Hillman Group 370980 Wedge Anchor, 1/4 X 2-1/4-Inch, 40-Pack
• The Hillman Group 371954 Wedge Anchor, 5/8 X 8-1/2-Inch, 10-Pack , Zinc - This type of concrete anchor is designed for use in concrete only and should never be used in block or brick base material. Once installed, these wedge anchors cannot be removed without destroying the concrete.
• The Hillman Group 371950 Wedge Anchor, 5/8 X 6-Inch, 10-Pack - Building code approved. It is building code approved, and can also be used with treated lumber. Zinc-plated wedge anchors designed for consistent performance in cracked and un-cracked concrete. Anchor can be installed through standard fixture holes.
• The Hillman Group 371942 Wedge Anchor, 1/2 X 5-1/2-Inch, 25-Pack , Zinc - This type of concrete anchor is designed for use in concrete only and should never be used in block or brick base material. Once installed, these wedge anchors cannot be removed without destroying the concrete.
• (10) WEJ-IT ATG3452 Concrete Wedge Anchor Bolt 3/4" x 5-1/2 ANKR-TITE Galvanized - Part# ATG3452. Up for sale is a box of 10 WEJ-IT/ANKR-TITE Concrete Wedge Anchor Bolts. - Hot-Dipped Galvanized.
• Powers VERTIGO PLUS 3/8 Thread In Wedge Bolt For Hanging 1/2-13 Rod - Powers VERTIGO PLUS 3/8 Thread In Wedge Bolt For Hanging 1/2-13 Rod in concrete Qty 40 in case. Includes drill bit
• Hilti 258030 HIS-N Carbon Steel 1/2" X 5" Inserts 5 Piece Part Hardware New - See photos.
• Hillman 3/4" x 6" Strike Anchor 375679 Yellow Zinc (Qty 10)
• Hillman 5/8" x 6" Strike Anchor 375674 Yellow Zinc (Qty 10)
• 48PK Dewalt 06228-PWR Expansion Anchor: 316, 1/2"-13 Thread Size, 1/2 in Dia. - Location FC14-1New without original package. 48PK Dewalt Expansion Anchor: Plain, 316, 1/2"-13 Anchor Thread Size, 1/2 in Anchor Dia., 50 PK
• Red Head RM-38 Drop-In Anchor - Box of 50 - Drill Size: 1/2". See photos for details.
• Red Head RL-38 Drop-In Anchor - Lot of 56 - Drill Size: 1/2". See photos for details.
• Red Head RM-14 Drop-In Anchor - Box of 85 - Drill Size: 3/8". See photos for details.
• Caddy CRLM37EG 3/8in Rod Lock Metal Decking Pre-Set Anchor BOX OF 25 - Eliminate overhead drilling into building structure – nVent CADDY Rod Lock Preset Anchors are cast in place. Easy "push-to-install" design allows installers to simply push the threaded rod through the mounting hole, instantly holding it in position.
• Concrete Wedge Anchors Zinc Plated Masonry Anchors - 1/2"-13 x 3-3/4" - 8 Pack
• 10 Pk RedHead CSWW-5842 Trubolt+ 316 Stainless Steel Wedge Anchor 5/8" x 4-1/4" - Box of 10 RedHead CSWW-5842 Trubolt+316 Stainless Steel Wedge Anchor 5/8" x 4-1/4" (USA). Wedge Type Anchors— The Trubolt+ Wedge Anchor consists of a high-strength threaded anchor body, expansion clip, hex nut and washer.
• ITW/Buildex - SPF3-134 3/16 " x 1-3/4" 410 Stainless Steel Flathead Tapcon® - The Flat Head 410 Stainless Steel Tapcon. per box with one correctly sized bit. It can be used in brick, block, CMU, or concrete. Material 410 Stainless Steel Silver Climaseal® Coated. A safety factor of 4:1 or 25% is generally accepted as a safe working load.
• ITW/Buildex - SPF4-214 1/4" x 2-1/4" 410 Stainless Steel Flat Head Tapcon® - The Flat Head 410 Stainless Steel Tapcon. per box with one correctly sized bit. It can be used in brick, block, CMU, or concrete. Material 410 Stainless Steel Silver Climaseal® Coated. Thread Length 1-3/4".
• ITW/Buildex - SHW4-314 1/4" x 3-1/4" 410 Stainless Steel Hex Tapcon® - The 1/4" x 3-1/4" 410 Stainless Steel Hex Tapcon. per box with one correctly sized bit. They are designed specifically to be used in most common masonry base materials, such as concrete, brick or block.
• ITW/Buildex - SHW4-214 1/4" x 2-1/4" 410 Stainless Steel Hex Tapcon® - The 1/4" x 2-1/4" 410 Stainless Steel Hex Tapcon. per box with one correctly sized bit. They are designed specifically to be used in most common masonry base materials, such as concrete, brick or block.
• 3/8" x 2-3/4" Zinc Plated Carbon Steel Power-Stud+ SD1 Wedge Expansion Anchor
• 1/4" x 2-1/4" Trubolt® Zinc Plated Carbon Steel Wedge Anchor ( 39)
• (7PK) RED HEAD 3/8”(DIA) x 3”(L) ROUND HEAD SLEEVE ANCHORS (11013) - (7PK) RED HEAD 3/8”(DIA) x 3”(L) ROUND HEAD SLEEVE ANCHORS, FOR BRICK, BLOCK, AND CONCRETE APPLICATIONS (11013) - OPEN BOX NEW. SEE PICS FOR MORE DETAILS. YOU GET ITEMS PICTURED. SHIPPED WITH USPS FIRST CLASS MAIL.
• drive nail anchors cobra 386E - drive nail anchors cobra 386E.
• Box of 5 MKT - 2619000 1" x 9" MKT Sup-R Stud® + Anchor - Box of 5 MKT - 2619000 1" x 9" MKT Sup-R Stud® + Anchor.
• Zoro Select B09100.062.0600 Sleeve Anchor,Hex Nut,5/8" Dia.,Pk45 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 5/8 in, Anchor Length 6 in, Thread Size 1/2, Min. ZORO SELECT. Westward 31Ng29 Anchor Pins, Steel, 6 In. X 1 In., Pk500. General Purpose.
• 5/8" x 7" Hex Nut Head Concrete Sleeve Anchors Zinc Plated (Qty 9) - 5/8"-11 x 7" Concrete Sleeve Anchors. Includes Hex Nut and Flat Washer. Zinc Plated. Condition: Pre-owned.
• Sammys sidewinder 3/8" threaded rod holder with 1/4-20 self drilling screws 1" - Sammys sidewinder 3/8" threaded rod holder with 1/4-20 self drilling screws 1".  Lot of 15.
• US ANCHOR Proferred UltraWedge+ CR+3 Steel Zinc 3/4"-10 x 5 1/2" Box 20 157400 - 3/4"-10 x 5 1/2" ULTRAWEDGE+ ANCHOR STEEL ZINC CR+3. US ANCHOR Proferred. 20 New in the Original Box.
• Full 100pc Box Ramset 1524E 3-Inch Low Velocity Powder 3" Pins - Ramset 1524E. Low Velocity Powder 3" Pins.
• Lot of 4 NEW IN SEALED BOX 1990 STAR Stud Bolt Anchors 1/4" x 3 1/4" NOS 40/Box -  Lot of 4 NEW IN SEALED BOX 1990 STAR Stud Bolt Anchors 1/4" x 3 1/4" NOS 40/Box Copyright Star Expansion 1990. 3-8805-30001 No. 5.
• 1/2” x 10” HDG wedge anchors - 1/2” x 10” HDG wedge anchors. 18 of the 21 have hardware
• Hilti 336426 HDI 3/8" Drop-In Threaded Concrete Anchors Box of 50 NEW
• 5/16" x 1-3/8" Crocodile Masonry Anchors - OPEN BOX - Thread Size: 18. Type: Expansion Anchor. Length: 1-3/8".
• *3/8 x 5 inch Concrete Anchors 12 pcs - 12- 3/8 inch x 5 Concrete Anchors. (Jim)
• Lot of 21 - 3/8" X 5" Power-Bolt Anchors Concrete Powers Fasteners with Nut - Shed bolt shelf.
• Powers wedge Bolt Anchors 3/8 x 3” (31) - Powers wedge Bolt Anchors 3/8 x 3” (31).
• 40 X Through Bolt Wedge Expanding Concrete Anchors M8 x 10mm 75mm Yzp - NEW Ones - Product Title: 40 X Through Bolt Wedge Expanding Concrete Anchors M8 X 10mm 75mm Yzp - NEW Ones Product Condition: New Weight (kg/g): 1.211 Information: Masonry Anchors, ZYP Finish,Tough and reliable construction to cover most heavy duty fixing applications offering strong and secure anchorage. Yellow 8mm x 10mm x 75mm Steel YZP YZP Yellow Zinc Plated Steel Weather Resistant 8mm x 10mm x 75mm Metallic Yellow Product Image:.
• 20- 5/5" X3-1/2" Wedge Ancors B-32 - 20- 5/8" x 3-1/2" wedge ancors
• MT2-B16 Tang End Drill Chuck Arbor Shank Morse Taper Kit Holder Connector - Brand Unbranded UPC Does Not Apply.
• 🔥9) New Powers Fasteners Power-Stud+ Sd1 9637Sd1 Seismic Anchors 6" X 5/8" - (POWER-STUD+ SD1 9637SD1. SEISMIC ANCHORS 6" X 5/8". 🔥9) NEW POWERS FASTENERS. ORDERS PUT IN BEFORE 2PM EST WILL GO OUT. WE ARE ALWAYS HERE TO HELP YOU. WE ARE HAPPY TO HELP!
• 🔥10) New Powers Fasteners Power-Stud+ Sd1 9640Sd1 Seismic Anchors 6-1/4" X 3/4" - (POWER-STUD+ SD1 9640SD1. SEISMIC ANCHORS 6-1/4" X 3/4". 🔥10) NEW POWERS FASTENERS. ORDERS PUT IN BEFORE 2PM EST WILL GO OUT. WE ARE ALWAYS HERE TO HELP YOU. WE ARE HAPPY TO HELP!
• (10) Red Head Expansion Wedge Anchors WW-34100, 3/4" x 10", 304 Stainless Steel - Wedge Concrete Anchor. Expansion Wedge. ICC Approved for Un-Cracked Concrete. 304 Stainless Steel. Thread Length 1 3/4 in. Thread Size 3/4"-10. Maximum Work Thickness 6 in. Length 10 in.
• (50) DeWalt Powers Expansion Wedge Concrete Anchor 07323, 1/2" x 4-1/2", Steel - Expansion Wedge Anchor. Material Stainless Steel. New, never used. There is minor exterior wear from storage, including light scratches and scuffs. Complete case of (50). Maximum Work Thickness 2 1/4 in.
• (50) DeWalt Powers Expansion Wedge Concrete Anchor 7413SD2-PWR, 3/8" x 3", Steel - Expansion Wedge Anchor. ICC Approved for Cracked Concrete. ICC Approved for Un-Cracked Concrete. Material Steel. New, never used. There is minor exterior wear from storage, including light scratches and scuffs.
• ITW Red Head Trubolt+ 5/8" x 4 1/2" 10 pcs per box - ® - TB4C-5844 5/8" x 4-1/2" Red Head Trubolt+ Anchor Zinc Plated. Wrench Size For Nut 15/16". Thread Length Fully Threaded. Primary Concrete only. Maximum Torque 90 ft./lbs. Box Qty 10. ESR-3772 (See Docs Tab for more information).
• ITW Red Head Trubolt+ 3/4" x 8 1/2" 10 pcs per box - ® - TB4C-3484 3/4" x 8 1/2" Red Head Trubolt+ Anchor Zinc Plated. ESR-3772 (See Docs Tab for more information). Zinc plated for indoor use. Fully Threaded.
• ITW Red Head Trubolt+ 3/8" x 5" 50 pcs per box - ® - TB4C-3850 3/8" x 5" Red Head Trubolt+ Anchor Zinc Plated. ESR-3772 (See Docs Tab for more information). Zinc plated for indoor use. Fully Threaded.
• Powers Fasteners 5/8" x 3-1/2" Concrete Wedge Anchor Lot Of 22 - Warehouse Location: M51115. Prefer to pick it up yourself?. To get a freight quote we will need to know the following Country of Manufacture: United States. We choose the carrier. Unless otherwise specifically agreed to in writing by.
• Thunder Stud 3/8" x 5" Concrete Wedge Anchor Lot Of 47 - Warehouse Location: M51115. Prefer to pick it up yourself?. To get a freight quote we will need to know the following Country of Manufacture: United States. We choose the carrier. Unless otherwise specifically agreed to in writing by.
• Simpson SUBH3.25-R150 Bridging Connector For CFS, Pkg 150 - Many applications require only one screw, greatly reducing labor costs and increasing productivity. 150 count per box. Material: 43 mil (18 ga.). Flexible design solutions for web thicknesses of 33 mil (20 ga.) through 97 mil (12 ga.) and stud sizes from 3 5/8″ to 8″.
• QuikDrive PPSD11516S0818 #8 x 1-15/16" Subfloor-to-Steel Pilot Pt. Screw 2000ct - Point Type Pilot Point. Screw Size #8. Compatible Tools Quik Drive® PRO200SG2, Quik Drive® PRO250G2, Quik Drive® PRO300SG2. Drive Type #3 Square.
• Simpson Strong-Tie S11A150RNB 1-1/2" x .120 304SS Ring Shank Roofing Nails 7200c - Ideal for asphalt and synthetic slate roofing for superior holding and fast driving. Ideal for asphalt and synthetic slate roofing. Shank Type: Annular-Ring Shank. Large flat head, diamond point for easier driving.
• QuikDrive X1S1214 #12 x 1" Steel Decking Screws 1500ct - Screw Size #12. Point Size 3. Point Type Drill Point. Thread Type Machine Threads. Head Type Hex Washer Head. Drive Type 5/16 in. Length (in.).
• Simpson Strong-Tie X1B1214-3.5K #12 x 1" Self-Drilling X Metal Screw 3500ct - Coating/Material Clear Zinc Coating. Screw Size #12. Thread Type Machine Threads. Steel decking to structural steel. Steel stitching (“side-lap” stitching). Point Size 3. Length (in.).
• Hilti 3/4 X 7-1/2" Wedge Anchor - HILTI 3/4 X 7-1/2" WEDGE ANCHOR.
• 10ct HILLMAN POWERS FASTENERS POWER-STUD WEDGE ANCHOR 1/2" x 4-1/2" 370989 - 10 HILLMAN POWER STUD WEDGE ANCHORS. FOR CONCRETE.
• [11 Anchors]HILTI Sleeve Anchors HLC-HX 3/4" x 2 1/2" #336266 - [11 Anchors]HILTI Sleeve Anchors HLC-HX 3/4" x 2 1/2" #336266.
• [5 Pack]HILTI #336264 Sleeve anchors HLC-HX 5/8" x 4-1/4" - [5 Pack]HILTI #336264 Sleeve anchors HLC-HX 5/8" x 4-1/4".
• 25 Red Head Heavy Duty Concrete Wedge Anchor 3/8" x 3-3/4" - Made In USA - NIB
• 12 Red Head Heavy Duty Concrete Wedge Anchor 1/2" x 4-1/4" - Made In USA - NIB
• 25 Red Head 1/2" x 5-1/2" Wedge Anchor - Concrete Anchor - Made In USA - NIB
• (4) Concrete Wedge Anchor Bolts 5/8 x 6" Includes Nuts & Washers Made In USA NOS
• Hangermate Wood Socket Rod Hanger Driver - If possible, take pictures and send them to us - and we will assist you in replacing your order. GRESCHLERS HARDWARE.
• Red Head Multi-Set Ii Srm-38 Drop-In Anchor Box Of 50 New - New/Unused Surplus Condition.
• WEJ-IT FCS3631 CONCRETE SCREWS W/ Drill BIT 3/16" X 3 1/4", FLAT HEAD,
• 50 Pack NEW Red Head Sleeve Anchors 3/8" Diameter x 3" L 50 Pieces in Box 11281 - New in Box Red Head Sleeve Anchors 3/8" Dia x 3"L 50 Pieces in Box 11281. I did open the box and count. There are 50 anchors in the box.
• DEWALT 7323SD4 Expansion Wedge Anchor, 1/2"D, 2-7/8"L (50-Pack)
• Cobra Parawedge Concrete Anchors - Cobra Parawedge Concrete Anchors.
• PowerStud 5/8" x 5" 304 SS-MCM, Stainless Steel, 09609-PWR (10/Pkg.) - Manufacturer Part #:09609-PWR. Material: Stainless Steel. We are not an authorized dealer of this product. This product has no manufacturers warranty.
• 3/4 x 4 3/4 inch Anchor Bolts qty=10
• Zoro Select B09100.075.0400 Sleeve Anchor,Hex Nut,3/4" Dia.,Pk40 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 3/4 in, Anchor Length 4 in, Thread Size 5/8, Min. ZORO SELECT. General Purpose. & Recepticles. Electrical Outlets. Light Industrial.
• Zoro Select U70420.075.0850 Wedge Anchor,3/4",8-1/2",303/304,Pk2 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 8 1/2 in, Max. Work Thickness 3 1/8 in, Thread Length 6 in, Thread Size 3/4 In.-10, Min.
• Mkt Fastening 1722000 Sleeve Anchor, 3/4 X 4-1/4In, Pk5 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/4 in, Anchor Length 4 1/4 in, Thread Size 5/8-11, Max. Work Thickness 2 1/4 in, Min. MKT FASTENING. Lyle T1-1206-Eg_18X12 Buckle Up Traffic Sign, 12 In H, 18 In W, Aluminum.
• Mkt Fastening 2858600 Wedge Anchor,Galv. Steel, 5/8X6,Pk5 - MKT FASTENING 2858600 Wedge Anchor,Galv. Steel, 5/8x6,PK5. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 5/8 in, Anchor Length 6 in, Max. Work Thickness 3 1/4 in, Thread Length 4 1/8 in, Thread Size 5/8 In.-11, Min.
• Mkt Fastening 1705Ss0 Sleeve Anchor, 1/4 X 1-3/8In, Pk10 - Sleeve Anchor, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 1/4 in, Anchor Length 1 3/8 in, Thread Size 3/16-24, Max. Work Thickness 3/8 in, Min. MKT FASTENING. & Recepticles.
• Mkt Fastening 1716000 Sleeve Anchor, 1/2 X 4In, Pk10 - Wera 05135404001 Power Bit,Sae,4Mm,Hios,T5,1-9/16",Pk10. Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/2 in, Anchor Length 4 in, Thread Size 3/8-16, Max.
• Hilti KWIK Bolt TZ Expansion Anchor - 304 Stainless Steel - KB-TZ 3/4" x 5-1/2" - Hilti Part Number: 387534. Especially Suited for Seismic and Cracked Concrete Applications. Anchor Length: 5-1/2 in. AISI 304 Stainless Steel. Anchor Material Box Quantity: 10. Nuts and Washers are Pre-Assembled.
• ITW Ramset/Red Head Self Drilling Concrete Anchor 3/8"-16 Drill Size 9/16"(S-38) - We will do our best to resolve any issues.
• [Quantity 40] 3/8-16 x 3-3/4" Heavy Duty Zinc Plated Concrete Wedge Anchor - Lot pictured is lot you will receive.
• (10) Concrete Bent Anchor Bolts 1/2-13 x 12" Hot Galvanized - These hot dip galvanized anchors are 1/2-13 thread and are 12" in length (inside bend) with a 4" thread length and 1" L (inside bend). Lot of (10) bent anchor bolts.
• 10pc Hillman RAWL Wedge Bolt Heavy Duty Concrete Anchor 3/4" x 3" 372186 - Since the box was not sealed I dumped them out and counted them. Every single one of them is present.
• Zoro Select B09100.037.0187 Sleeve Anchor,Hex Nut,3/8" Dia.,Pk300 - Anvil 0310068002 3" Malleable Iron Wye. Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 3/8 in, Anchor Length 1 7/8 in, Thread Size 5/16, Min. ZORO SELECT. General Purpose. Dynabrade 48355 Straight Die Grinder, 1/4 In Npt Female Air Inlet, 1/4 In.
• Dewalt Hangermate Wood Rod Hanger Anchor 2 Shank PFM2251100 - Dewalt Hangermate Wood Rod Hanger Anchor 2 Shank PFM2251100.
• 1/2 x 5 concrete anchor bolts qty=14
• SAMMYS 1" for steel Drilling Rod Anchors New Box Of 25 - SAMMYS 1" for steel Drilling Rod Anchors New Box Of 25 . Shipped with Economy Shipping.
• 200 !!! 1/4" x 2" Zinc Round Head Sleeve Anchors - 200 anchors made in Canada
• Hilti KWIK BOLT KB-TZ2 2210270 Wedge Stud Anchor 5/8in x 4-1/4in ***LOT OF 15*** - Quantity(1 Lot of 15) Hilti KWIK BOLT KB-TZ2 #2210270 Wedge Stud Anchor 5/8in x 4-1/4in. Ultimate-performance wedge anchor for cracked concrete and seismic (carbon steel). Per ICC-ES, compliant for use in diamond cored holes.
• Hillman Lag Shield Anchors 100 PK 1/4" Short 370204 1/2" Drill Hole Medium Duty
• (100) Flat Head 1/4 x 1-1/2 Split Drive Anchors Concrete Nail-In Hammer-In - These zinc plated anchors are designed for a 1/4" drill hole and are 1-1/2" in length. Lot of (100) split drive anchors.
• 25pc Hillman Powers Wedge-Bolt+ Heavy Duty Concrete Anchor 1/2" x 2" 372166 - Since the box was not sealed I dumped them out and counted them. Every single one of them is present.
• Hilti Hdi Drop In Threaded Concrete Anchors -- 1/4" (100 Pcs) & 3/8" (25 Pcs) - HILTI HDI DROP-IN THREADED CONCRETE ANCHORS -- BOX OF 100 1/4" x 1" ANCHORS  064185  & BOX OF 25 3/8" x 1 9/16 ANCHORS  337951 -- BOTH BOXES ARE NEW -- PLEASE SEE PHOTOS FOR STYLE,AGE,COLOR AND CONDITION -THANK YOU   -- LOC: BLACK TOTE  9
• Hilti expansion Anchors - Hilti expansion Anchors. HSL3 M12/50, 156MMPriced individually, the box comes with 10 but the price is for one, special pricing for larger quantities.
• *NEW* Honeywell/Miller 3/4in. Multi-Use Grip Anchor - Miller's 5,000 lb. Multi-use Miller Grip Anchorage can be used in either concrete or rock substrate. DO NOT use in steel, wood or any other substrate.
• (100) FASTENAL Concrete Wedge Anchor Bolts 1/4 x 1-3/4 W/Nuts & Washers - LY PALLET 32.
• Zoro Select B09200.037.0500 Sleeve Anchor,Flat Head Hex,Pk175 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 3/8 in, Anchor Length 5 in, Thread Size 5/16, Min. ZORO SELECT. General Purpose. & Recepticles. Electrical Outlets. Light Industrial.
• Zoro Select B09100.075.0625 Sleeve Anchor,Hex Nut,3/4" Dia.,Pk28 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 3/4 in, Anchor Length 6 1/4 in, Thread Size 5/8, Min. ZORO SELECT. Lift-All 12Eex4 Sling,Wire Rope,4 Ft L,Vert Cap 5000 Lb. Tensator 896T2-35-Max-D4x-C Belt Barrier,13 Ft,Black W/Yellow Stripe.
• Simpson Strong Tie THD2511RHP1 Titen HD Rod Hanger 1/4 x 1-1/2 6 Pack - Concrete screw for overhead application. Concrete, Block, Brick.
• 50 Cobra Parawedge 1/2" X 5-1/2" Concrete Anchors with Bolt, Washer & Nut
• Cobra 504G Parawedge - 4 Pack Concrete Anchors - 1/2" x 7" - Does not includes any other set pieces. 100% Authentic. if the item has issues in the future or during use.
• 10 PACK Galvanized 1" x 18" Concrete Bent Anchor L Bolts W/ Hardware 45230 - Location 63B 10 PACK ~ 45230 Concrete Bent Anchor L Bolts 1" x 18" W/ Hardware. Anchor Bolt: 1 in Anchor Dia., 18 in Anchor Lg, 4 in Thread Lg, 10 PK
• Stud Anchor M6~M20 Zinc Coated Carbon Steel Stud Anchor for Concrete Stud Anchor - M6 ~ M20 bolt anchor carbon steel bolt anchor for concrete. ● Size: M6, M8, M10, M12, M14, M16, M18, M20. M8 100 M12 150 M20 200. M6 50 M10 60 M14 100. M6 60 M10 70 M14 120. M6 70 M10 80 M14 150. M6 80 M10 100 M16 100.
• Simpson Strong-Tie Strong-Bolt Wedge Anchor 25PK 1/2" x 4-1/4" Concrete/Masonry
• 3/8"-3" concrete wedge anchors with sleeve
• Wej-It 1"-8 x 6" Ankr-TITE Wedge Anchor Type 304SS Stainless Steel ATS1060 - New no Box Wej-It 1"-8 x 6" Ankr-TITE Wedge Anchor Type 304SS Stainless Steel. Part Number ATS1060. (LL-B-Box 284).
• Simpson Strong-Tie Strong-Bolt Wedge Anchor 50PK 3/8" x 3-3/4" Concrete/Masonry
• Simpson Strong-Tie Strong-Bolt Wedge Anchor 100PK 1/4" x 2-1/4" STB2-25214
• Simpson Strong-Tie Titen Heavy Duty Screw Anchor 100PK 1/4" x 1-7/8" THDB25178H
• 7 Boxes (25) Hilti Kwik Bolt Expansion Anchor 1/2" x 2-3/4" - 282509 - 7 Boxes (25) Hilti Kwik Bolt Expansion Anchor 1/2" x 2-3/4" - 282509.
• Lot Of 2 Unused Dewalt Double Expansion Anchor 3/4"-Bolt 1-1/4"-Drill - O Will there be a loading dock or forklift?. We do not buy direct from the manufacturers or from authorized dealers. The serial numbers in the pictures are covered to prevent mischief by hackers or others that want to cause harm.
• CHEMICAL CAPSULE RAWPLUG M16 (16mm) ANCHOR STUD MASONRY SPIN QTY 10 - • Suitable for making fixings underwater. Adhesive strength is not affected by unpolluted water. • Garage doors. • Formwork supports. • Fencing & gates. • Curtain walling. • Cladding restraints. • Steel columns.
• RAWL 3/4 Machine Screw Caulk-in Anchors - Hi up for sale is a RAWL 3/4 Machine Screw Caulk-in Anchors. See photos for details. Press breaks, Plate Rolls, Sheer, Welders, Stud Welders, Spot Welders, Welding Coolers, 100's of New Welding leads 50' & 100', Plasma Cutters, Band Saws, Hypotherm Burn Table Plasma Units.
• 5/8 x 5" Wedge Concrete Anchors Zinc Plated 25 pcs. New - Type: Wedge Anchors. Finish: Zinc Plated. Quantity: 25 pcs. Size: 5/8" x 5". Condition: New.
• Confast SE12 Concrete Expansion Drop In Anchor Bolt 1/2” Hole 7/8” (BOX OF 25) - Single Expansion Anchor Bolt 1/2” Hole 7/8” (BOX OF 25).
• 19 Red Head Trubolt+ 11273 Partial Box 1/2"x5-1/2" Wedge Anchor Concrete Anchor - Get Supersized Images & Free Image Hosting.
• 25 Red Head Trubolt+ 11273 1/2"x5-1/2" Wedge Anchor Concrete Anchor - Get Supersized Images & Free Image Hosting.
• DeWalt 06320MC Steel Dropin Carbon 5/8" - 4Pcs - New
• 5 Pack - Star Concrete Sleeve Anchor 1/2” x 2 1/4” Zinc Plated - These 2 1/4" require a minimum 1 1/2" of bite into the concrete you are attaching to and and would be perfect for attaching anything from 1/8" to 3/4" to concrete.
• qty 50 Rawl Sleeve Through Bolt Concrete Wedge Anchor M10 10Mm X 90Mm -  .
• Nine (9) Wedge anchor -Various sizes - Various sizes of wedge anchor bolts - zinc coated. Good condition.
• 8MM X 50Mm Through Bolt Rawl Sleeve Concrete Wedge Anchor M8 8MM STUD pk 10 -  .
• 5/8 x 6" Wedge Anchors Zinc
• Hilti KB3 1/4" X 3 1/4": Anchors w/nuts & washers (Box/100 Each)
• 3/8 18 X 5" Wedge Anchor Bolts Zinc - 10 count 3/8 18 x 5" wedge anchor bolts, zinc plated. Excellent condition.
• 5/8 6" Wedge Anchor Bolts ZInc - 5/8 18 x 6" Wedge Anchors zinc.
• 5/16 18 X 3 Hex Screw Zinc NC GR2 - 40 Count 5/16 18 x 3" NC GR2 Hex Screws Zinc.
• 1/2" x 5 1/2 " Anchor bolts - 1/2 " X 5 1/2" Wedge anchor bolts. Zinc plated steel with washer and not furnished.
• (100) Short 5/16" Lag Bolt Shields 5/16 x 1-1/4 Concrete Anchors Ships free - Qty of (100) Short 5/16" Lag Bolt Shields 5/16 x 1-1/4 Concrete Anchors.
• (50) Concrete Wedge Anchor Bolts 3/8 x 2-3/4 Includes Nuts & Washers Ships Free - Qty of (50) 2 boxes of 25 each Power Stud Concrete Wedge Anchor Bolts 3/8 x 2-3/4 Includes Nuts & Washers.
• Red Head 3/8-in X 3-in Head Silver Sleeve Anchors (8) - Red Head 3/8-in X 3-in Head Silver Sleeve Anchors (8).
• 10 Powers Expansion Wedge Anchor 7461 1" x 6" LT STEEL BUY IT NOW FREE SHIPPING
• MKT FASTENING Wedge Anchor, Zinc Plated, 5/8x6, PK5 2658600 - Wedge Anchor Type : Wedge Anchor. Fastener Finish : Zinc Plated. Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 6 in, Max.
• Simpson Strong-Tie Wedge Anchor STB2-626004SS, 5/8" x 6" 304 Stainless Steel - Simpson Strong-Tie Wedge Anchor STB2-626004SS, 5/8" x 6" 304 Stainless Steel.
• Brand New Box of 25 Sammys 8013925 for Wood GST 2 2", 1/2" Rod
• (10 pack) Hilti Anchor Rod 5/8" X 12”, Has-b-105, Hot Dip Galvanized *FREE SHIP* - 100% Genuine U S A S E L L E R.
• Red Head WS-1432 Trubolt Carbon Steel Wedge 1/4" by 3-1/4" Anchor (100 per Box) - Red Head WS-1432 Trubolt Carbon Steel Wedge 1/4" by 3-1/4" Anchor (100 per Box). New leftover stock. Open box.
• Dottie Machine Screw Anchors Size 1/4” Drill 1/2” - 50 Pack - ST tool No included. Dottie Machine Screw Anchors Size 1/4” Drill 1/2” - 50 Pack.
• (10) Red Head Expansion Wedge Anchors WW-34100, 3/4" x 10", 304 Stainless Steel - Wedge Concrete Anchor. Expansion Wedge. ICC Approved for Un-Cracked Concrete. 304 Stainless Steel. Thread Length 1 3/4 in. Thread Size 3/4"-10. Maximum Work Thickness 6 in.
• (25) Sammys 3/8-16 x 1-3/4 Threaded Rod Hanger for Concrete 8059957 - (25) Sammys 3/8-16 x 1-3/4 Threaded Rod Hanger for Concrete 8059957.
• RED HEAD 5/8-11 x 5" Red Head Stud Anchor (JS-58M) - 5/8-11 x 5" Red Head Stud Anchor (JS-58M).
• Red Head Js-57H Concrete Wedge Anchors
• ITW Red Head WS-58100 5/8" x 10" Trubolt Carbon Wedge Anchor 20 Anchors, 9 Nuts - ITW Red Head WS-58100 5/8" x 10" Trubolt Carbon Wedge Anchor As per photos20 total anchors in this sale, only 9 nuts and 7 washers are included.ThanksJohnS7
• ITW Red Head WS-58100 5/8" x 10" Trubolt Carbon Wedge Anchor 10 Per Box - ITW Red Head WS-58100 5/8" x 10" Trubolt Carbon Wedge Anchor 10 Per Box. As per photos10 total with nuts and washersThanksJohnS8
• Uline H-2121 Concrete Installation Kit H2121! 4 one inch Anchors! Brand NEW Set! - For: Machine Guards; Safety Bollards; Square Safety Bollards; Dock Bumper. Anchor Total Length: 5-3/4".
• Dewalt 7436SD2-PWR Stud Wedge Expansion Anchor 7 in, 5/8 in Thread, 25 Pack - Dewalt 7436SD2-PWR Stud Wedge Expansion Anchor 7 in, 5/8 in Thread, 25 Pack New. Original box will come damaged
• 3/4 x 7 Inches Galvanized Wedge Anchors ( - QTY: 95 Boxes, 10Galvanized Wedge Anchors per box.
• 24x Through Bolt 8Mm X 50Mm Rawl Sleeve Concrete Wedge Anchors size M8 -  .
• 25- Hillman 371938 1/2" X 3-3/4" Wedge Ancors B-18 - 25- HILLMAN 371938 1/2" X 3-3/4" WEDGE ANCORS
• 10-5/8”x8-1/2” Wej-It Concrete Wedge Anchor Bolts including nut and washer
• BOX Bolt BQ1G16 M16 galvanized Anchor Bolts. Box of 8. - Blind bolt connector that can be tightened down from one side. The hexagonal sleeve allows it to be held in position with an open ended wrench while a torque wrench is used to tighten the core bolt.
• 50 Anchors - Kimball Midwest 5/8" x 6" Wedge Anchor
• Red Head 1/2-in x 5-1/2-in Head Silver Wedge Anchors (21 count) - Red Head 1/2-in x 5-1/2-in Head Silver Wedge Anchors (21 count). Ideal for fastening into concrete. Code recognized per ICC-ES ESR 2251. 
• 40-5/8”x8-1/2” Wej-It Concrete Wedge Anchor Bolts including nut and washer - Box of 40 (4 boxes of 10 each).
• 13 pc LOT SIMPSON TITEN STRONG TIE THD50500H HD Concrete Screw Anchor 1/2" x 5" - 13 pc Lot of Anchor Screws.
• (20) Concrete Bent Anchor Bolts 1/2-13 x 8" Hot Galvanized - These hot dip galvanized anchors are 1/2-13 thread and are 8" in length (inside bend) with a 4" thread length and 1" L (inside bend). Lot of (20) bent anchor bolts.
• 30Pieces of angled beveled washers Great Compatibility with 1/4”Wide Application - 30x Beveled Washers. - Material: 316 Stainless Steel. - Fit For: 1/4" Threaded Stud End (1/8" & 3/16" Cable Railing Kit).
• 30Pieces of angled beveled washers Great Compatibility with 1/4”Wide Application - 30x Beveled Washers. - Material: 316 Stainless Steel. - Fit For: 1/4" Threaded Stud End (1/8" & 3/16" Cable Railing Kit).
• Wej-it AT1060 1" X 6" Ankr-TITE Wedge Anchor (Zinc Plated) LOT OF 7 - Hi up for sale is a Wej-it AT1060 1" X 6" Ankr-TITE Wedge Anchor (Zinc Plated). See photos for details. Press breaks, Plate Rolls, Sheer, Welders, Stud Welders, Spot Welders, Welding Coolers, 100's of New Welding leads 50' & 100', Plasma Cutters, Band Saws, Hypotherm Burn Table Plasma Units.
• (10 pk) Red Head 5/8" x 5" Wedge Anchors For Heavy Duty Concrete Use 12310 - Red Head 5/8" x 5" wedge anchors - there is some paint on the outside product case (see photos) actual product is new in bags (see photos) Tracking Provided Once Shipped
• 2 Pack 3/8" x 3" Stainless Steel Wedge Anchors
• 1/2" x 3-3/4" Stainless Steel Wedge Anchor
• 2 Pack 3/8" x 5" Stainless Steel Wedge Anchors
• 1/2" x 5-1/2" Stainless Steel Wedge Anchor
• 3/8" x 5" Stainless Steel Wedge Anchor
• 3/8" x 2-3/4" Stainless Steel Wedge Anchor
• Box of 25 Haydon C-1102 x 4in EG Assy Rigid Clamp 72389, 31416-00 - Box of 25 Haydon C-1102 x 4in EG Assy Rigid Clamp 72389, 31416-00. As Pictures Show the Original Box is Damaged from Shipping but Items are in New Unused Condition.Keywords: Fasteners, Hardware, AnchorsSellers Notes Item Location R4BAS
• Lot Anchor setting tools: 15 total Rawls 3/8 inch
• Lot Anchor setting tools: 15 total Rawls 3/8 inch
• Lot Anchor setting tools: 17 total 19/64; 13/64; 5/32; 15/64; 11/32; 5/16 heads - Lot Anchor setting tools.
• (100) 1/4-20 Self Drilling Concrete Anchor ITW Red Head S-14 Female Hardened - 100 pieces (full box) 1/4-20 Self Drilling Concrete Anchor ITW Red Head S-14 Female
• (50) 1/2-13 Self Drilling Concrete Anchor ITW Red Head S-12 Female 1/2 Strong - 50 pieces (full box) 1/2-13 self Drilling Concrete Anchor ITW Red Head S-12 Female
• Hillman Lag Shield Anchors Lot Bulk - Hillman Lag Shield Anchors bulk lot. Quantity can be seen pretty well from the photos, but if you need an accurate count on a specific size I'll do my best to provide a number.
• Hillman Pop Toggle 375370 Lot
• Hillman Hollow Wall Drive Wall Anchors Lot Bulk - 370035 -- 100 pcs. 370036 -- 100 pcs. 370006 -- 100 pcs. 370012 -- 50 pcs. 370015 -- 50 pcs. 370018 -- 50 pcs.
• Hillman Lag Shield Anchors Lot Bulk - Hillman Lag Shield Anchors bulk lot. 370213 -- 50 pcs. 370195 -- 50 pcs. 370189 -- 100 pcs.
• Lot Anchor setting tools - 6 pieces 1/2 inch head ; 1 piece 5/8" head (A)
• Lot Anchor setting tools - 6 pieces 1/4 inch head ; 1 piece 9/32 head (B)
• Contractor vtg Wedge Anchor lot STAR 1/4 X 1 3/4 QTY 25 nut washer concrete
• = Lot of 3 Red Head Wedge Anchors 3/8" Dia x 2-1/4"L 15 Pieces Per Box 13015 - Lot of 3 Boxes Red Head Wedge Anchors 3/8" Diameter x 2-1/4" Length, 15-Count, Model #13015 For heavy duty concrete applications. New. Includes 3 boxes containing 15 each for a total of 45 wedge anchors. 3/8" diameter. 2-1/4" length. The use of a carbide drill bit conforming to ANSI Standard B212.15 is recommended.
• LOT OF 10 Zinc Plated Steel 10591 Stud Anchors 3/4" 10 x 6- 1/4 - Stud anchors. WEDGE ANCHORS ZINC. Zinc plated steel.
• 3/8 In. X 4 In. Flat Philips Head HLC Sleeve Anchors (5-Pack) - The pre-assembled stud-type anchor design makes your fastening project easier and quicker, as you can accomplish through-type fastenings even in bottomless holes. HLC Sleeve Anchors also feature a bulged middle section of the sleeve with triangular diamond shaped openings that help prevent the Anchors from twisting in its hole or dropping out of an overhead hole.
• 1/4 In. X 2-1/4 In. Zinc-Plated Steel Hex-Nut-Head Solid Concrete Wedge Anchors - X 2-1/4 In. Wedge anchors are designed for fastening into solid concrete. Corrosion resistant, 1-piece stainless steel clip. : 1/4"Anchor Length (in.). : 2.25Fastener Length (in.).
• (50) 1/2-13 Self Drilling Concrete Anchor ITW Red Head S-12 Female (11/16 drill) - 50 pieces (full box).
• (100) 5/16-18 Self Drilling Concrete Anchor ITW Red Head S-16 Female 15/32 drill - 100 pieces (full box).
• (50) 3/8-16 Self Drilling Concrete Anchor ITW Red Head S-38 Female (9/16 drill)
• Lot Of 10 Dewalt Concrete Anchors 7451Sd1 - 12" X 3/4" - Se Habla Español. What is displayed in the pictures is what will be sold.
• Lot of 4 8020 Angle Brackets w/ Hardware 1 1/2" x 3" - See photos.
• 3/4" x 4"L Wedge Anchors, Zinc plated - Set of four 3/4" Dia. wedge anchors as shown.
• 1/4 In. X 2 In. Flat Philips Head HLC Sleeve Anchors (5-Pack) - The pre-assembled stud-type anchor design makes your fastening project easier and quicker, as you can accomplish through-type fastenings even in bottomless holes. HLC Sleeve Anchors also feature a bulged middle section of the sleeve with triangular diamond shaped openings that help prevent the Anchors from twisting in its hole or dropping out of an overhead hole.
• NEW BURNDY KS34 SPLIT CABLE CLAMPS RUN 500 MCM / Tap 2/0 - 500 🏈 - BRAN NEW BURNDY KS34 Split Bolt Connectors Run 500 MCM / Tap 2/0 - 500.
• 5/8" X 6" Screw Bolt Anchor (Quantity of 1) - Combined Checkout! If possible, take pictures and send them to us - and we will assist you in replacing your order.
• 5/8" X 6" Screw Bolt Anchors (Pack of 12) - Combined Checkout! If possible, take pictures and send them to us - and we will assist you in replacing your order.
• Simpson Strong-Tie Stb2-251346Ss 316 Strong-Bolt 2 Wedge Anchor (Box Of 100)
• 100 pc power bull 1/4 x 1 3/8 machine head screws sleevel anchors flat regular
• Red Head 150 Box Trubolt Wedge Anchors 3/8" x 3 inch Steel Heavy Duty Concrete - Red Head 150 Box Trubolt Wedge Anchors 3/8" x 3 inch Steel Heavy Duty Concrete.
• Red Head WS-34120 Trubolt Carbon Steel Wedge 3/4" by 12" Anchor (10 per box) - Type Wedge Anchor. ICC Approved for Uncracked Concrete Yes. ICC Approved for Cracked Concrete No. Thread Length 1-3/4". Application Anchoring Machinery and Conveyors, Steel Racking. Material Steel.
• LOT OF SIX RED HEAD CONCRETE ANCHORS 4 are 5/8” x 4-1/4 2 are 5/8” x 6” - LOT OF SIX RED HEAD CONCRETE ANCHORS 4 are 5/8” x 4-1/4 2 are 5/8” x 6”. All are new. One missing packaging. Sorry no returns. Thanks!
• (50)ITW RED HEAD 3/8" x 3-3/4" CONCRETE EXPANDING WEDGE STUD BOLT ANCHOR TRUBOLT - This sale is for (50) 3-3/4" ITW RED HEAD concrete wedge bolts, with full length thread.
• (100) HILTI KWIK BOLT II,1/4” x 3-1/4” AISI 1038 CONCRETE WEDGE ANCHORS++BONUS - This sale is for (100) HILTI Kwik Bolt ll. They appear to galvanized (KBll) They are 1/4" x 3-1/4" long. BONUS is a HILTI concrete drill bit, # 177632N1. It has NOT been used and is the bit with (4) flutes.
• (50)NOS,HILTI 3/8" x 5" KWIK BOLT II ANCHOR SET KB II 00045365 Anchor Bolts. - This sale is for (1) NOS box of (50) HILTI KWIK BOLT ll, 3/8" x 5" concrete anchor bolts. This box was still TAPED from the factory. (cut open to check contents). I have SEVERAL more boxes of these (never opened) and other sizes.
• 33 Anchors - Kimball Midwest 3/4" x 4-1/4" Wedge Anchor
• 30 Anchors - Kimball Midwest 5/8" x 6" Wedge Anchor
• Box Of 10  Sup-R-Stud 3/4 X 8 1/2 #2634812 Wedge Anchor - ZINC PLATED.
• Box of 20 Hilti Anchor HSL-3 M 12/25 Bolt Version # 371781 - The box was only opened to photograph the contents.
• Sealed Box of 20 Hilti Anchor HSL-3 M 12/25 Bolt Version # 371781 - Specializing in the “unusual” and “bulk deals.”. “BUY IN BULK AND SAVE”.
• Lot of 3 Hilti 5/8”x 4-1/4” HLC Hex Nut Sleeve Anchor 338021 - Lot of 3 Hilti 5/8”x 4-1/4” HLC Hex Nut Sleeve Anchor 338021.
• FISCHER Ankle Duopower Diameter 5,6, 8,10in + Screw Head Countersunk - ·         Bi-material ankle for better performance and ingenious operation (expands, unfolds, forms a knot), depending on the support. ·         Excellent "feel-good factor". You can feel exactly when the ankle is correctly placed. ·         The dowel is shorter, which ensures quick fixing without time-consuming drilling work. ·         Anti-rotation lugs prevent the anchor from rotating in the hole during installation. ·         The combination of the two materials and the multiple operating modes (deploys, expands, forms a knot) widen the field of applications with significantly higher loads.
• Batch Of 100 Ankle Brass Ms 6X24 Fisher 26426 - The MS anchor is a brass expansion anchor with metric thread. The dowel is suitable for pending assembly. When screwing in the screw or the threaded rod, the dowel expands and anchors itself against the walls of the borehole. The MS brass dowel is mainly suitable for fixing shelves and instantaneous water heaters in solid building materials. Tapping allows the use of standard metric screws or threaded rods; moreover, disassembly without surface protrusion and reuse of the fixing point are possible. This offers great flexibility. The introduction of the metric screw creates the expansion of the front part of the brass plug and thus anchors it securely in the support. Determination of screw length for flush installation: dowel length (l) (see table) + thickness to be fixed = minimum screw le.
• Kit Holder Basin Urinal On Vernier IN Holder Hollow WD Hm 8x55 FISCHER - Fixing for pedestal washbasins in WD HM 8 x 55 hollow supports For thin walls 10 to 21 mm thick Complete sets of fixings for sinks and urinals Item number 26032   Benefits ·         Complete fixing sets allow for quick and easy assembly.   Operation ·         Tiles and plasters are considered to be non-load bearing layers.   Technical data content per sachet 2 anchors HM 8 x 55,  2 threaded rods M8x115,     2 nylon shoulder eccentric hole washers,  2 metal washers,  2 M8 nuts GTIN (EAN code) 4006209260326   I have other sales in progress, come take a look ... Add me to your Favorite Sellers list and come back regularly.  Thank you for your co.
• Ankle Auto Drill For Plates Plaster FISCHER Duoblade - Self-drilling anchor for fischer DUOBLADE plasterboard plates main Features Anti-rotation pins preventing the ankle from turning in the borehole. Use of standard hooks, screws and eyelets Benefits Standard cruciform impression PZ 2 for easy mounting. Applications Smoke detectors Mirrors Curtain rods Blinds Lamps Frames Materials Plasterboard sheets, single and lined Fibro-plasterboard Lightweight cement boards Operation The fischer DUOBLADE anchor is suitable for pending mounting. Technical data Ankle length l 44 [mm] minimum drilling depth. for pending installation h1 50 [mm] minimum thickness up to the first bearing layer t 50 [mm] Minimum screwing depth. lE, min 28 [mm] Screw dimensions ds xls 4 - 5 [mm] Anchoring depth hef 9.5 - 25 [mm] Ankle length without drilling tip l1 29 [mm] GTIN.
• Ankle Nylon 10x135 - Master nylon anchor 10x135.
• Ankle FISCHER Rodforce Fgd M8 M6 - RODFORCE FGD anchor The economical impact anchor - for quick and easy fixing of threaded rods The RODFORCE FGD anchor is an economical solution for fixing standard threaded rods in solid materials.  It also includes a breaking point allowing the threaded rod to be pushed deeper for adjustment and height adjustment. Applications Suspensions for individual pipes Heating and sanitary fixings Cable and pipe clamps Ceiling lights Consoles Rails Materials Concrete Solid sand-lime brick Solid brick Details (building materials, loads, etc.) of the approval, if available, apply Operation By hammering the threaded rod into the ankle, it expands in 4 directions thanks to its conical internal geometry. The notches inside the dowel lock with the threads of the threaded rod. The notches on the outside o.
• Kit Holder For Wc Bidet Toilet S 8 Rd 80 Wcr - Fixing for WC S 8 RD 80 WCR Item number 60568 main Features   Description ·         Contains white and chrome caps. ·         Kit for through mounting.
• Kit Holder Of Sink Wc And Wc Hanging Wde 8 x 110 FISCHER 27010 - Fixing of washbasins and wall-hung toilets WDE 8 x 110. · Wall hung WC. · The UX universal anchor can be used in all solid, hollow and panel materials, which provides high flexibility. · Hollow block of lightweight concrete.
• Ankle Boots Toggle IN Nylon FISCHER DUOTEC-10 537258 - d 0 10 d p 12 d p 55 at 40 d s l s h 1 l s l 50 t fix.
• Ankle Duopower FISCHER 6x50 8x65 10x80 12x60 14x70 - DUOPOWER FISCHER ANKLE. · The DUOPOWER is suitable for standby mounting and through mounting. · Excellent "feel-good factor". We can feel precisely when the ankle is correctly placed. · The narrow collar prevents the ankle from sliding in the borehole.
• Ankle Nylon Plastic To Expansion Fischer SX 12x60 10x50 8x40 6x30 - FISCHER SX expansion anchor 12x60 10x50 8x40 6x30     Description: Materials Concrete Brick with vertical perforations Hollow block of lightweight concrete Hourdis brick and concrete Perforated sand-lime brick Solid sand-lime brick Natural stone with dense structure Aerated concrete Plaster tiles Solid lightweight concrete block Solid brick Benefits Operation / Assembly The SX is suitable for standby mounting.     Applications Lamps Wardrobes Motion detectors Skirting boards Lightweight wall shelves Bathroom cabinets Mail boxes TV brackets Trellis Swing shutters Bathroom and toilet equipment     I have other sales in progress, come take a look .
• Ankle Duopower FISCHER Diameter 5,6, 8,10in - d 0 5 h 1 35 d p l 25 l 29 d s s xl s d 0 6 h 1 d p l l d s s s   d 0 8 h 1 d p l l d s s s d 0 10 h 1 70 d p l 50 l 58 d s s s.
• Anklet Multi Materials Plastic Diameter 5,6, 8in - Multi-material plastic anchor diameter 5.6 or 8mm Ensures the formation of a locking knot in hollow materials and expansion in all solid materials The anti-rotation device or the anti-rotation fins ensure the blocking in the drilling hole Patented anchor head facilitates ankle knot formation when screw is screwed Quick and easy assembly Suitable for preliminary and through mounting Foldable ankle collar Resistance to mold, weathering and aging Made of high quality polyamide (nylon) Free of silicone and halogen Application domain Universal plastic plugs Suitable for mounting Use with a wood screw or a chipboard screw Can be used outdoors or in humid atmospheres with a stainless steel screw I have other sales in progress, come take a look… Add me to your list of Favorite Sellers and.
• Batch Of 25 Ankle Slogging Brass To Expansion Hel M8 Or M6 - HEL brass expansion plug Technical data M8 plugs Head configuration: Internal thread Drill bit diameter: 10 mm Type of fixing: Installation before piece to fix Material, corrosion: Brass Environmental conditions: Indoors, dry environment Installation direction: All   Technical data anchors M6 Head configuration: Internal thread Drill bit diameter: 8 mm Type of fixing: Installation before piece to fix Material, corrosion: Brass Environmental conditions: Indoors, dry environment Installation direction: All Condition: new.
• Ankle Slogging Brass To Expansion M8, M6 - HEL brass expansion plug Technical data M8 plugs Head configuration: Internal thread Drill bit diameter: 10 mm Type of fixing: Installation before piece to fix Material, corrosion: Brass Environmental conditions: Indoors, dry environment Installation direction: All   Technical data anchors M6 Head configuration: Internal thread Drill bit diameter: 8 mm Type of fixing: Installation before piece to fix Material, corrosion: Brass Installation direction: All Condition: new Information:     I have other sales in progress, come take a look… Thank you for your confidence. https://stores.ebay.fr/pdmsolutions.
• Ankle Concrete Cellular FISCHER GB8 50491 24327 - Item number 50491 main Features   Description Benefits   Applications ·         Cable ways ·         Pipes ·         Bodyguard ·         Awnings ·         Mail boxes ·         Trellis Materials Suitable for:   Operation / Assembly   Technical data Nominal Drill Diameter d 0 8 [mm] Min.drilling depth h 1 60 [mm] l = h ef 50 [mm] screw d s 5 [mm] GTIN (EAN code) 4006209504918   Thank you for.
• Ankle Nylon Master Without Collarette M6 - Master nylon anchor without M6 collar Plastic anchor for light loads High quality polyamide (nylon) Halogen and silicone free Thermal resistance from -40 ° C to +80 ° C Anti-rotation fins Two installation methods: prior or through mounting Indication In aerated concrete and dimpled brick, drill without impact Drilling dust must be removed from the hole Application domain Plastic anchor for light loads Diameter 6 mm Length (l) 30 mm Installation depth (hnom) 30 mm Drilling diameter (d0) 6 mm For wood screws Ø 3.5 - 5mm Screw diameter for particle board required (d particle screw) 5 mm Installation depth (hs) 30 mm Center distance (a) 60 mm Distance to edge (ar) 30 mm Drilling depth (t) 40 mm Thickness to be fixed max. (da) / conditions According to the length of the screw Screw length (.
• Kit Holder For Ballon D' Water Hot Boiler Bo 120 FISCHER 80654 - Fixing for hot water tank BO 120 Complete fixing kit for water heater. Item number 80654   Benefits ·         Complete fixing sets.   Operation ·         BO: the BO fixing consists of a UX 14 nylon anchor, an M10x120 electro-galvanized threaded stud and a BU nylon nut without collar. ·     Technical data content per sachet 4 UX 14 anchors, 4 electro-galvanized M10x120 studs, 4 nuts without collar BU-oH M10 GTIN (EAN code) 4006209806548   I have other sales in progress, come take a look ... Add me to your Favorite Sellers list and come back regularly.  Thank you for your confidence.
• Lot of 50 - 3/8"-16 x 3" Steel UltraWedge Anchor - Lot of 50 - 3/8-16 x 3 Ultrawedge Stainless Steel Anchor. Location: LH Shelf 3C.
• Redhead 12029 Heavy Duty Wedge Anchor 1/2" X 7" Concrete Hot-Dipped Galvanized
• Red Head Wedge Anchor 1/2”x 5-1/2” - Red Head Wedge Anchor 1/2”x 5-1/2”.
• Mkt Fastening 2758412 Wedge Anchor,303/304 Ss,5/8X4 1/2,Pk5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 5/8 in, Anchor Length 4 1/2 in, Max. Work Thickness 1 3/4 in, Thread Length 2 5/8 in, Thread Size 5/8 In.-11, Min.
• Simpson Strong-Tie Strong-Bolt 2 3/8-in x 3-in Silver Wedge Anchor (150 count)
• Concrete Wedge Anchor, Red Head: Steel, Zinc Plated, 1/4" x 3 1/4", 100 ct. - Concrete Wedge Anchor: Steel, Zinc Plated, 1/4 in Anchor Dia., 3 1/4 in Anchor Lg, 100 PK. Wedge Anchor Type Expansion Wedge Anchor. Item Wedge Anchor. ICC Approved for Cracked Concrete No. ICC Approved for Un-Cracked Concrete Yes.
• MKT FASTENING 3916006 Bulk Zap-It Mech Anchor,1/4" x 1",PK2000 - Package Quantity 2000.
• Dewalt Power Fasteners Lok-Bolt AS Round Head 1/4" x 1-3/8" Sleeve Anchor 100 Pk
• Dewalt 1/2 In. X 7 In. Power-Stud Carbon Steel Wedge Expansion Anchor - 25 An... - The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included. Dewalt 1/2 In. Power-Stud Carbon Steel Wedge Expansion Anchor - 25 Anchors.
• Dewalt 5/8 In. X 5 In. Power-Stud Carbon Steel Wedge Expansion Anchor - 25 An... - The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included. Dewalt 5/8 In. Power-Stud Carbon Steel Wedge Expansion Anchor - 25 Anchors.
• Dewalt 7/8 In. X 6 In. Power-Stud Carbon Steel Wedge Expansion Anchor - 10 An... - The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included. Dewalt 7/8 In. Power-Stud Carbon Steel Wedge Expansion Anchor - 10 Anchors.
• Dewalt 5/8 In. X 8-1/2 In. Power-Stud Carbon Steel Wedge Expansion Anchor - 2... - The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included. Dewalt 5/8 In. X 8-1/2 In. Power-Stud Carbon Steel Wedge Expansion Anchor - 25 Anchors.
• Dewalt 5/8 In. X 3-1/2 In. Power-Stud Carbon Steel Wedge Expansion Anchor - 2... - The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included. Dewalt 5/8 In. X 3-1/2 In. Power-Stud Carbon Steel Wedge Expansion Anchor - 25 Anchors.
• Red Head 1/2-in x 7-in Head Silver Wedge Anchor (18 Pack) - Red Head 1/2-in x 7-in Head Silver Wedge Anchor (18 Pack). Red Head Galvanized steel hex-nut-head concrete wedge anchors are ideal for attaching electrical equipment and other items to solid concrete. 
• Red Head 1/2-in x 7-in Head Silver Wedge Anchor (11 Pack) - Red Head 1/2-in x 7-in Head Silver Wedge Anchor (11 Pack). Red Head wedge anchors are heavy-duty, zinc-plated, steel anchors designed for fastening applications in solid concrete.
• Red Head 3/8-in x 5-in Head Silver Wedge Anchor - Red Head 3/8-in x 5-in Head Silver Wedge Anchor. Red Head wedge anchors are heavy-duty, zinc-plated, steel anchors designed for fastening applications in solid concrete. 
• Red Head 5/8-in x 5-in Head Silver Wedge Anchor (12 Pack) - Red Head 5/8-in x 5-in Head Silver Wedge Anchor (12 Pack).
• Red Head 1/2-in x 4-1/4-in Head Silver Wedge Anchor (18 Pack) - Red Head 1/2-in x 4-1/4-in Head Silver Wedge Anchor (18 Pack). Red Head wedge anchors are heavy-duty, zinc-plated, steel anchors designed for fastening applications in solid concrete. 
• Power Fasteners Power-Stud Plus SD1 Wedge Anchors 1/2" x 4-1/2" 25 Pieces
• Red Head 11022 Trubolt 5-in 3/8-in Heavy Duty Concrete Wedge Anchors pack of 15 - Red Head 11022 Trubolt 5-in 3/8-in Heavy Duty Concrete Wedge Anchors pack of 15.
• Lot of 10 3/4" x 5.5" Concrete Anchor Anchor Steel/Zinc Plated - We do not provide technical support for set up, installation or any other use related issues. Therefore, we do not have record of item history or type of use.
• Part Number 8015925, Sammys® 1/2" Vertical Threaded Rod Anchor - GST 3 - box of 25;
• Part Number 8025957, Sammys® 1/4" Vertical Threaded Rod Anchor - DST 100 - box of 25;
• 30Pieces of angled beveled washers Great Compatibility with 1/4”Wide Application - Specifications: - Overall Dimension(LxWxH): 5/8” x 5/8” x 1/2” (1.6 x 1.6 x 1.21 cm) - Inner Diameter: 1/4” (0.61 cm) - Outer Diameter: 5/8” (1.58 cm) - Fit For: 1/4" Threaded Stud End (1/8" & 3/16" Cable Railing Kit) - Material: 316 Stainless Steel - Net Weight: 0.66 Lb (0.3 kg) Package Contents: - 30x Beveled Washers.
• dewalt power-stud Box of 20 07344-pwr Power Stud 304SS 3/4" x 6 1/4" - Ultimate Shear (Lb.). Ultimate Tension (Lbs.). Agency Compliance. Work Thickness. Anchor Length. Fully Threaded. ICC Approved for Un-Cracked Concrete. ICC Approved for Cracked Concrete.
• Lead Anchor & Screw Kit Spring Tip Setting Tool Steel Insert 3/4" 10-24 Masonry - Tool: 17" Long. Lot includes tool, case, information booklet, 43 anchors, 68 screws. Item will be carefully wrapped.
• redhead trubolt 1/4 x 3 1/4 concrete anchor - redhead trubolt 1/4 x 3 1/4 concrete anchor. 50 count box of anchors only Does not include washers or nuts Anchors are all brand newNuts and washers missing 50 count of Anchors
• Ramset Trubolt Expansion Wedge Concrete Anchor About 5/8 X 5 1/2 - Ramset Trubolt Expansion Wedge Concrete Anchor About 5/8 X 5.5 Price is for a 4 pack 4 bolts with nut, washer, lock washer All anchors never used, they have been sitting in a bulk box in the shop Measurements are as shown by tape measure Price is for 4 bolts 4 bolts with nut, washer, lock washer
• (20) 3/4"-10 X 6-1/4" Concrete Wedge Anchor With Washer & Hex Nut Zinc Plated - (20) 3/4"-10 X 6-1/4" Concrete Wedge Anchor With Washer & Hex Nut Zinc Plated. I have several of these boxes available they came out of the supply room of a large company that closed down their installation department they were on the shelf for over 10 years so although the boxes are dirty the product is brand new
• Hangermate 3/8 Threaded Rod Anchors, Partial Box Of 35 Ea (Item #2969) - HANGERMATE 3/8 THREADED ROD ANCHORS. PARTIAL BOX OF 35 EA. FOR ATTACHING 3/8" ROD TO WOOD.
• Hangermate 1/4 Threaded Rod Anchors, Partial Box Of 48 Ea (Item #2968) - HANGERMATE 1/4 THREADED ROD ANCHORS. PARTIAL BOX OF 48 EA. FOR ATTACHING 1/4" ROD TO WOOD.
• NEW RED HEAD TRUBOLT WEDGE ANCHOR WS-58100 5/8" x 10" ZINC PLATED STEEL OEM - New, never used. Open box, complete case of 10 anchors, 10 nuts & 10 washers.
• (50-Pack) Power Fasteners 9867 Calk-In #10-24 Machine Bolt Anchor 3/8" Drill - 3/8" Drill. - For #10-24 Machine Screws.
• sleeve anchor - sleeve anchor.
• Stretch Expansion Anchors for Masonry, Concrete, Brick 10 PK - Includes 10 anchors.
• Aerosmith Carbon Steel Wedge Anchor Zinc 5/8″ X 5″ (50/Box) WAG58500
• 1/2" X 3-3/4 In. Wedge Anchor (25-Pack) - 1/2" X 3-3/4 In. Carbon steel anchor component.
• RED HEAD 6 1/4 in Stainless Steel Expansion Wedge Anchor 10 Pack - RED HEAD 6 1/4 in Stainless Steel Expansion Wedge Anchor 10 Pack.
• Qty 25 - 5/8"-11 Powers Smart DI+ Carbon Steel Smooth Wall Dropin Anchors - Qty 25 - 5/8"-11 Powers Smart DI+ Carbon Steel Smooth Wall Dropin Anchors.
• Simpson Strong Tie Strong-Bolt 2 Wedge Anchor! Concrete Bolt, 3/8 x 5 inch
• Lot of (20) M12 x 6" Zinc Sleeve/Wedge Anchors
• 50 pcs. Carbon steel zinc Concrete Wedge Anchor Bolts 5/8" x 5" w Nuts & Washers
• Dewalt 5/8 In. X 7 In. Power-Stud Carbon Steel Wedge Anchor - 25 An...7436SD1 - • Wedge expansion concrete anchors are heavy-duty anchors used in cracked and uncracked concrete. • (1) Box of 25 Wedge Expansion Anchor. Powers Fasteners - 7436SD1-PWR - 5/8 In. Power-Stud Carbon Steel Wedge Expansion Anchor - 25 Anchors.
• Box of 50 Red Head WS-3870 Wedge Anchors 3/8" x 7" Carbon Steel - New, box is distressed from transportation.
• Dottie PHFW123, 12 x 3" Phillips Head Wood Screws, Zinc Plated - Box of 98 - Dottie PHFW123. Zinc Plated. DON'T MISS OUT ON THIS GREAT DEAL!
• 3/8" x 5" Wedge Anchor Bolt Zinc-Plated Carbon Steel / Cement Concrete - 50 pcs - Great for use in CONCRETE only, and should never be used in block or brick base material. Maximum Fixture Thickness: The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 3-1/8".
• Hilti 336426 HDI 3/8" New Box of 50 Drop-In Threaded Concrete Anchors - NEW - Here we have A Great " Hilti 336426 HDI 3/8" New Box of 50 Drop-In Threaded Concrete Anchors - NEW ". Full box and t hese have never been used.
• Red Head Concrete Anchors 3/8 x 4" 50/pk Ramset DYNABOLT - Dynabolt can be installed through object to be fastened. Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer. Anchors are made of of Plated Cardon Steel.
• (60- Bulk Pack) Fabory Concrete Wedge Anchor, 3/8" x 3", Zinc Plated Floor - Total of 60Fabory U70411.037.0300 Wedge Anchor, 3/8", 3", Zp Carbon Stl, 6 - 10 PACKS (60).
• 5/8" x 5" Zinc Plated Steel Wej-It Anchors WAS-354 (20 pcs.) Open Box - Application: Concrete|Stone. Finish: Zinc. Material: Steel. Box of 20. Drill Size: 5/8".
• Anchors 3/8" x 2 1/4"
• NEW OLDS STOCK UNISET DHT-63 Head Hat Drive Pin,8mm,0.145x5/8" PK100 SHIPS FREE
• (10-PACK) Powers® 3/4" x 10" Wedge-Bolt®+ Screw Anchor, Carbon Steel | 7290SD - MPN: 7290SD. (10) 3/4" x 10" Powers Wedge-Bolt+ 7290SD. The Wedge-Bolt+ anchor is a one piece, heavy duty screw anchor with a finished hex head. It is simple to install, easy to identify and fully removable.
• Imperial 71059 Fully Plated Key Stock 1"x1"x12" - Zinc plated 1018 carbon steel.
• BOX OF 10 - ITW Red Head Trubolt Wedge Anchors 12029 For Heavy Duty Concrete Use
• Dewalt 5/8 In. X 7 In. Power-Stud Carbon Steel Wedge Expansion Anchor - 25 An... - The anchor is manufactured with a zinc plated carbon steel body and expansion clip for premium performance. Nut and washer are included. Dewalt 5/8 In. Power-Stud Carbon Steel Wedge Expansion Anchor - 25 Anchors.
• 7/8” Anchor Bolts 4 Pieces - 7/8” Anchor Bolts. 4 pieces
• Qty 50 x MKT 1312CTO Sup-R-Drop Steel Mechanical Anchor, 1/2in" Coil Thread
• 12 Wej-it Original 5/8”D X 5” Concrete Wedge Anchors - 12 Wej-it Original 5” Concrete Wedge Anchors 5/8”. No box so I don’t have any further information. UnusedMeasurements in pictures Including the paper instructions but it’s torn and wrinkled. 5/8” diameter 5” length
• Applied PK2 Wedge Anchors 1" x 9" In Inch 116679930 Zinc-Plated Expansion Anchor
• 16 NEW concrete wedge anchors - Lot of 16 expansion concrete wedge anchors and 5 heavy duty black oxide bolts and washers…new & unused extras from a job…M16 coarse thread…90mm bolt length…80mm total anchor length….ships via usps priority mail
• 16 NEW m16 X 200mm expansion concrete anchor studs - Lot of 16 expansion concrete wedge anchors and studs…new & unused extras from a job…M16 coarse thread with washers (no nuts)…200mm total stud length…60mm anchor length….usps priority shipping
• BOX 15 RED HEAD 3/8" x 3" Hex-Head Sleeve Anchors for Blocks Brick Concrete - BOX of 15 RED HEAD 3/8 in. x 3 in. Hex-Head, Hex Head.  Sleeve Anchors for Block, Brick, and Concrete. Please message me if you have any questions and thank you so much for looking at my redhead hex sleeve anchors.
• 3/8X3-3/4 Masonry Anchor (Pack of 25) SP101150 - Work confidently knowing you can rely on Heads and Threads for the premium fasteners, hardware, screws, nuts and bolts, as well as other MRO related products your organization needs to keep it up and running.
• Lot of 60 Concrete Stud Anchor Bolts _ Misc. Sizes and 1 Setting tool - Lot of 60 Concrete Stud Anchor Bolts _ Misc. Sizes and 1 Setting tool.
• (20) Powers 09648 Powerstud 1/4"x1-3/4"
• MKT FASTENING TH63K Head Top Hat,0.300,0.145 x 5/8",PK100 - Package Quantity 100.
• MKT FASTENING 6960000 Uni-Tap Mech Anchor,0.281"x3-1/8",PK100 - Uni-Tap Mech Anchor,0.281 In.x3-1/8 In.,PK100, Package Quantity 100.
• MKT FASTENING M16325301 Wedge Anchor,Stl,M12,152mm,PK20 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 18 mm, Anchor Length 152 mm, Max. Work Thickness 40 mm, Thread Size M12 x 1.75mm, Min. Embedment 80 mm, Embedment In Concrete 80 mm, Package Quantity 20.
• Zoro Select B09100.050.0400 Sleeve Anchor,Hex Nut,1/2" Dia.,Pk110 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 1/2 in, Anchor Length 4 in, Thread Size 3/8, Min. ZORO SELECT. General Purpose. Condor 468N36 Safety Sign, 10 In Height, 7 In Width, Aluminum, Horizontal.
• MKT FASTENING TH100 Head Top Hat,0.300,0.145 x 1",PK100 - Package Quantity 100.
• M6~M20 Stud Anchors 304 Stainless Steel Stud Anchors for Concrete Expanding Bolt - ● Thread Size:M6,M8,M10 ,M12,M14 ,M16 ,M18 ,M20. ● Material:A2 Stainless Steel ( SUS 304 ) ( 304 Stainless Steel ). Expanding Bolt Length 50mm - 150mm. Type of Stainless Steel.
• MKT FASTENING 5660126 TapIt,Mushr Head Alum Bulk,1/4x1",PK6000 - TapIt,Mushr Head Alum Bulk,1/4x1 In.,PK6000, Package Quantity 6000.
• (41) Concrete Wedge Anchor Bolts 1/2 x 3-3/4 Includes Nuts & Washers - Lot of (41) wedge anchor bolts. Nuts and flat washers are included.
• vertigo Rod hanger 1/4” x 2” Hold up to 370 pounds - vertigo Rod hanger 1/4” x 2” Hold up to 370 pounds. Please look at all pictures. Thanks for looking.Box 17
• MKT FASTENING 273833SB Wedge Anchor,316 SS,3/8x3 3/4,PK400 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 3 3/4 in, Max. Work Thickness 2 1/8 in, Thread Length 2 5/8 in, Thread Size 3/8 In.-16, Min. Embedment 1 5/8 in, Embedment In Concrete 3 3/8 in, Ultimate Pullout (Lb.) 3,556 lb, Ultimate Shear (Lb.) 3,151 lb, Ultimate Shear in 3000 PSI Concrete (Lb.) 3,151 lb, Ultimate Shear in 4000 PSI Concrete (Lb.) 3,151 lb, Ultimate Tension (Lbs.) 3,556 lb.
• MKT FASTENING M14215301 Wedge Anchor Bolt,M10,108mm,PK5 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 15 mm, Anchor Length 108 mm, Max. Work Thickness 15 mm, Thread Size M10, Min. Embedment 85 mm, Package Quantity 5.
• MKT FASTENING M16220301 Wedge Anchor,Stl,M10,121mm,PK25 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 15 mm, Anchor Length 121 mm, Max. Work Thickness 25 mm, Thread Size M10 x 1.50mm, Min. Embedment 71 mm, Embedment In Concrete 71 mm, Package Quantity 25.
• MKT FASTENING M14105301 Wedge Anchor Bolt,M8,77mm,PK10 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 12 mm, Anchor Length 77 mm, Max. Work Thickness 5 mm, Thread Size M8, Min. Embedment 70 mm, Package Quantity 10.
• MKT FASTENING 271241SB Wedge Anchor,316 SS,1/2x4 1/4,PK200 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 4 1/4 in, Max. Work Thickness 2 in, Thread Length 3 in, Thread Size 1/2 In.-13, Min. Embedment 2 1/4 in, Embedment In Concrete 2 1/4 in, Ultimate Pullout (Lb.) 5,068 lb, Ultimate Shear (Lb.) 6,828 lb, Ultimate Shear in 3000 PSI Concrete (Lb.) 6,828 lb, Ultimate Shear in 4000 PSI Concrete (Lb.) 6,828 lb, Ultimate Tension (Lbs.) 5,068 lb.
• MKT FASTENING 1719SS0 Sleeve Anchor, 5/8 x 4-1/4In, PK5 - Sleeve Anchor, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 5/8 in, Anchor Length 4 1/4 in, Thread Size 1/2-13, Max. Work Thickness 2 1/4 in, Min. Embedment 2 in, Ultimate Shear in 4000 PSI Concrete (Lb.) 7,880 lb, Ultimate Tension in 4000 PSI Concrete (Lb.) 5,970 lb, Meets/Exceeds G.S.A. SPEC FF-S-325C, GRP II, Type 3 Class 3, Package Quantity 5.
• MKT FASTENING M14225301 Wedge Anchor Bolt,M10,138mm,PK5 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 15 mm, Anchor Length 138 mm, Max. Work Thickness 45 mm, Thread Size M10, Min. Embedment 85 mm, Package Quantity 5.
• MKT FASTENING M16130301 Wedge Anchor Stud,M8,130mm,PK5 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 12 mm, Anchor Length 130 mm, Max. Work Thickness 50 mm, Thread Size M8, Min. Embedment 70 mm, Package Quantity 5.
• MKT FASTENING M16005301 Wedge Anchor Stud,M6,67mm,PK25 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 10 mm, Anchor Length 67 mm, Max. Work Thickness 5 mm, Thread Size M6, Min. Embedment 60 mm, Package Quantity 25.
• MKT FASTENING 1721SS0 Sleeve Anchor, 3/4 x 2-1/2In, PK5 - Sleeve Anchor, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 2 1/2 in, Thread Size 5/8-11, Max. Work Thickness 1/2 in, Min. Embedment 2 in, Ultimate Shear in 4000 PSI Concrete (Lb.) 11,620 lb, Ultimate Tension in 4000 PSI Concrete (Lb.) 8,780 lb, Meets/Exceeds G.S.A. SPEC FF-S-325C, GRP II, Type 3 Class 3, Package Quantity 5.
• MKT FASTENING 2611490 Wedge Anchor,Zinc Plated,1 1/4x9,PK4 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 1 1/4 in, Anchor Length 9 in, Max. Work Thickness 2 1/2 in, Thread Length 3 1/4 in, Thread Size 1 1/4 In.-7, Min. Embedment 6 1/2 in, Embedment In Concrete 6 1/2 in, Ultimate Pullout (Lb.) 23,090 lb, Ultimate Shear (Lb.) 33,000 lb, Ultimate Shear in 3000 PSI Concrete (Lb.) 33,000 lb, Ultimate Shear in 4000 PSI Concrete (Lb.) 33,000 lb, Ultimate Tension (Lbs.) 23,090 lb.
• ZORO SELECT B70420.075.0700 Wedge Anchor,SS,303 and 304,Plain,PK26 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 7 in, Max. Work Thickness 2 in, Thread Length 4 1/2 in, Thread Size 3/4 In.-10, Min. Embedment 3 1/4 in, Embedment In Concrete 3 1/4 in, Package Quantity 26.
• MKT FASTENING M16335301 Wedge Anchor Stud,M12,182mm,PK3 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 18 mm, Anchor Length 182 mm, Max. Work Thickness 70 mm, Thread Size M12, Min. Embedment 95 mm, Package Quantity 3.
• New Box of 50 WEJ-IT Sleeve Anchors, 3/8" x 3" . HSA3830 - New Box of 50 WEJ-IT Sleeve Anchors, 3/8" x 3" . HSA3830.
• ZORO SELECT B70420.075.1200 Wedge Anchor,SS,303 and 304,Plain,PK16 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 12 in, Max. Work Thickness 4 in, Thread Length 3 1/4 in, Thread Size 3/4 In.-10, Min. Embedment 3 1/4 in, Embedment In Concrete 3 1/4 in, Package Quantity 16.
• MKT FASTENING M14225301 Wedge Anchor,Stl,M10,138mm,PK25 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 15 mm, Anchor Length 138 mm, Max. Work Thickness 45 mm, Thread Size M10 x 1.50mm, Min. Embedment 71 mm, Embedment In Concrete 71 mm, Package Quantity 25.
• HILTI 3/4 in. x 8 in.Kwik Bolt1 Car/Steel Zinc Plated Concrete Anchor (10-Pack) - HILTI 3/4 in.
• HILTI - 1/2 in. x 5-1/2 in. Kwik Bolt 1 Carbon Steel Zinc Plated Concrete Anchor
• HILTI -Box Of 25 KB3 HDG Expansion Anchor 1/2in X 5-1/2in Lt #378085 - Box Of 25 Hilti KB3 HDG Expansion Anchor 1/2in X 5-1/2in Lt.
• ZORO SELECT B70420.037.0225 Wedge Anchor,SS,303 and 304,Plain,PK275 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 2 1/4 in, Max. Work Thickness 3/16 in, Thread Length 3/4 in, Thread Size 3/8 In.-16, Min. Embedment 1 1/2 in, Embedment In Concrete 1 1/2 in, Package Quantity 275.
• MKT FASTENING 1722SS0 Sleeve Anchor, 3/4 x 4-1/4In, PK5 - Sleeve Anchor, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 4 1/4 in, Thread Size 5/8-11, Max. Work Thickness 2 1/4 in, Min. Embedment 2 in, Ultimate Shear in 4000 PSI Concrete (Lb.) 11,620 lb, Ultimate Tension in 4000 PSI Concrete (Lb.) 8,780 lb, Meets/Exceeds G.S.A. SPEC FF-S-325C, GRP II, Type 3 Class 3, Package Quantity 5.
• MKT FASTENING M16530301 Wedge Anchor,Stl,M16,237mm,PK5 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 24 mm, Anchor Length 237 mm, Max. Work Thickness 100 mm, Thread Size M16 x 2mm, Min. Embedment 100 mm, Embedment In Concrete 100 mm, Package Quantity 5.
• MKT FASTENING M16325301 Wedge Anchor Stud,M12,152mm,PK3 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 18 mm, Anchor Length 152 mm, Max. Work Thickness 40 mm, Thread Size M12, Min. Embedment 95 mm, Package Quantity 3.
• Zoro Select U70420.075.0550 Wedge Anchor,3/4",5-1/2",303/304,Pk2 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 5 1/2 in, Max. Work Thickness 1 5/16 in, Thread Length 3 in, Thread Size 3/4 In.-10, Min.
• Mkt Fastening 2658600 Wedge Anchor,Zinc Plated,5/8X6,Pk5 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 6 in, Max. Work Thickness 3/8 in, Thread Length 4 1/8 in, Thread Size 5/8 In.-11, Min.
• Mkt Fastening 273833S Wedge Anchor,316 Ss,3/8X3 3/4,Pk20 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 3 3/4 in, Max. Work Thickness 2 1/8 in, Thread Length 2 5/8 in, Thread Size 3/8 In.-16, Min.
• Zoro Select U70420.100.0600 Wedge Anchor,1",6",303/304, - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 1 in, Anchor Length 6 in, Max. Work Thickness 1 in, Thread Length 2 7/8 in, Thread Size 1 In.-8, Min.
• Mkt Fastening 2514214 Wedge Anchor,Gr 5,1/4X2 1/4,Pk100 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 2 1/4 in, Max. Work Thickness 7/8 in, Thread Length 1 3/8 in, Thread Size 1/4 In.-20, Min.
• Mkt Fastening 2158812 Seismic Wedge Anchor,5/8X8 1/2,Pk5 - Seismic Wedge Anchor, Seismic Approved Yes, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 8 1/2 in, Max. Work Thickness 4 in, Thread Length 4 1/2 in, Thread Size 5/8 In.-11, Min.
• Zoro Select U70420.025.0325 Wedge Anchor,303/304 Ss,1/4,3-1/4In,Pk50 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 1/4 in, Anchor Length 3 1/4 in, Max. Work Thickness 1 3/8 in, Thread Length 2 1/8 in, Thread Size 1/4 In.-20, Min.
• Pack Of 100 Simpson ZN25200 Strong-Tie Zinc Pin Drive Anchors Nailon 1/4" X 2" - Excellent Pricing.
• SUP-R STUD 2438500 Wedge Anchor,Carb. Stl,3/8"x5",PK50 - Wedge Anchor,Carb. Stl,3/8 In.x5 In.,PK50, Package Quantity 50.
• MKT FASTENING M16505301 Wedge Anchor,Stl,M16,137mm,PK10 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 24 mm, Anchor Length 137 mm, Max. Work Thickness 0 mm, Thread Size M16 x 2mm, Min. Embedment 100 mm, Embedment In Concrete 100 mm, Package Quantity 10.
• MKT FASTENING M16340301 Wedge Anchor,Stl,M12,212mm,PK10 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 18 mm, Anchor Length 212 mm, Max. Work Thickness 100 mm, Thread Size M12 x 1.75mm, Min. Embedment 80 mm, Embedment In Concrete 80 mm, Package Quantity 10.
• ZORO SELECT B09200.025.0150 Sleeve Anchor,Flat Head Hex,PK1500 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 1/4 in, Anchor Length 1 1/2 in, Thread Size 10, Min. Embedment 1 1/8 in, Ultimate Tension in 4000 PSI Concrete (Lb.) 1,694 lb, Package Quantity 1500.
• ZORO SELECT B09100.031.0150 Sleeve Anchor,Hex Nut,5/16" Dia.,PK550 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 5/16 in, Anchor Length 1 1/2 in, Thread Size 1/4, Min. Embedment 1 1/4 in, Ultimate Tension in 4000 PSI Concrete (Lb.) 2,200 lb, Package Quantity 550.
• ZORO SELECT B09100.037.0400 Sleeve Anchor,Hex Nut,3/8" Dia.,PK200 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 3/8 in, Anchor Length 4 in, Thread Size 5/16, Min. Embedment 1 1/2 in, Ultimate Tension in 4000 PSI Concrete (Lb.) 2,706 lb, Package Quantity 200.
• ZORO SELECT B09100.025.0225 Sleeve Anchor,Hex Nut,1/4" Dia.,PK800 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 1/4 in, Anchor Length 2 1/4 in, Thread Size 10, Min. Embedment 1 1/8 in, Ultimate Tension in 4000 PSI Concrete (Lb.) 1,694 lb, Package Quantity 800.
• Mkt Fastening 2858812 Wedge Anchor,Galv. Steel, 5/8X8 1/2,Pk5 - MKT FASTENING 2858812 Wedge Anchor,Galv. Steel, 5/8x8 1/2,PK5. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 5/8 in, Anchor Length 8 1/2 in, Max. Work Thickness 5 3/4 in, Thread Length 4 in, Thread Size 5/8 In.-11, Min.
• Mkt Fastening 271251S Wedge Anchor,316 Ss,1/2X5 1/2,Pk10 - 3M Dbi-Sala 1500060 Clip Loop Coil Tether,45/64" W,Pk10. Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 5 1/2 in, Max.
• MKT FASTENING M14335301 Wedge Anchor,Stl,M12,177mm,Pk20 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 18 mm, Anchor Length 177 mm, Max. Work Thickness 70 mm, Thread Size M12 x 1.75mm, Min. Embedment 80 mm, Embedment In Concrete 80 mm, Package Quantity 20.
• MKT FASTENING M14125301 Wedge Anchor,Stl,M8,107mm,PK50 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 12 mm, Anchor Length 107 mm, Max. Work Thickness 30 mm, Thread Size M8 x 1.25mm, Min. Embedment 60 mm, Embedment In Concrete 60 mm, Package Quantity 50.
• MKT FASTENING M14110301 Wedge Anchor,Stl,M8,87mm,PK50 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 12 mm, Anchor Length 87 mm, Max. Work Thickness 10 mm, Thread Size M8 x 1.25mm, Min. Embedment 60 mm, Embedment In Concrete 60 mm, Package Quantity 50.
• MKT FASTENING M16305301 Wedge Anchor,Stl,M12,112mm,PK20 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 18 mm, Anchor Length 112 mm, Max. Work Thickness 0 mm, Thread Size M12 x 1.75mm, Min. Embedment 80 mm, Embedment In Concrete 80 mm, Package Quantity 20.
• M10 x 120 Sanko Bolt Anchor (Wedge) - Zinc Chromate Carbon Steel - Box of 50 pcs - M10 x 120 Sanko Bolt Anchor (Wedge) - Box of 50 pcs - Carbon Steel - Yellow Zinc Chromate. These have been sitting for a few years however since they are yellow zinc chromate they are still in perfect shape with no oxidization.
• MKT FASTENING M14030301 Wedge Anchor,Stl,M6,115mm,PK50 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 10 mm, Anchor Length 115 mm, Max. Work Thickness 50 mm, Thread Size M6 x 1mm, Min. Embedment 50 mm, Embedment In Concrete 50 mm, Package Quantity 50.
• Mkt Fastening 2838214 Wedge Anchor,Galv. Steel, 3/8X2 1/4,Pk20 - MKT FASTENING 2838214 Wedge Anchor,Galv. Steel, 3/8x2 1/4,PK20. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 3/8 in, Anchor Length 2 1/4 in, Max. Work Thickness 5/8 in, Thread Length 1 3/16 in, Thread Size 3/8 In.-16, Min.
• Mkt Fastening 2658500 Wedge Anchor,Zinc Plated,5/8X5,Pk5 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 5 in, Max. Work Thickness 2 1/4 in, Thread Length 3 1/4 in, Thread Size 5/8 In.-11, Min.
• Mkt Fastening 2112334 Seismic Wedge Anchor,1/2X3 3/4,Pk10 - Seismic Wedge Anchor, Seismic Approved Yes, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 1/2 in, Anchor Length 3 3/4 in, Max. Work Thickness 1/4 in, Thread Length 5/8 in, Thread Size 1/2 In.-13, Min.
• Zoro Select U70411.050.0450 Wedge Anchor,1/2,4-1/2,Zp Carbn Stl,Pk10 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/2 in, Anchor Length 4 1/2 in, Max. Work Thickness 1 1/2 in, Thread Length 2 3/4 in, Thread Size 1/2 In.-13, Min.
• Zoro Select U09200.025.0150 Sleeve Anchor,Flat,1/4In,1-1/2In,Pk100 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 1 1/2 in, Thread Size 10, Min. ZORO SELECT. Impact 801702-90 Gray Drainage Holes Hand Dryer Floor Mat 23" W X 18" L, 1".
• Zoro Select U09150.037.0187 Sleeve Anchor,Hex,Sst,3/8In,1-7/8In,Pk25 - Sleeve Anchor, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 1 7/8 in, Thread Size 5/16, Min. ZORO SELECT. General Purpose. & Recepticles. Electrical Outlets.
• Zoro Select U70411.025.0225 Wedge Anchor,1/4,2-1/4,Zp Carbn Stl,Pk50 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 2 1/4 in, Max. Work Thickness 3/8 in, Thread Length 1 1/8 in, Thread Size 1/4 in x 2-1/4 in, Min.
• Zoro Select U70411.050.0425 Wedge Anchor,1/2,4-1/4,Zp Carbn Stl,Pk10 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/2 in, Anchor Length 4 1/4 in, Max. Work Thickness 3/4 in, Thread Length 2 1/2 in, Thread Size 1/2 In.-13, Min.
• MKT FASTENING 273461S Wedge Anchor,316 SS,3/4x6 1/4,PK5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 6 1/4 in, Max. Work Thickness 2 7/8 in, Thread Length 4 1/4 in, Thread Size 3/4 In.-10, Min. Embedment 3 3/8 in, Embedment In Concrete 3 3/8 in, Ultimate Pullout (Lb.) 11,975 lb, Ultimate Shear (Lb.) 15,126 lb, Ultimate Shear in 3000 PSI Concrete (Lb.) 15,126 lb, Ultimate Shear in 4000 PSI Concrete (Lb.) 15,126 lb, Ultimate Tension (Lbs.) 11,975 lb.
• Mkt Fastening 2658312 Wedge Anchor,Zinc Plated,5/8X3 1/2,Pk5 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 3 1/2 in, Max. Work Thickness 3/4 in, Thread Length 1 5/8 in, Thread Size 5/8 In.-11, Min.
• Zoro Select U09200.025.0225 Sleeve Anchor,Flat,1/4In,2-1/4In,Pk100 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 2 1/4 in, Thread Size 10, Min. ZORO SELECT. General Purpose. & Recepticles. Electrical Outlets.
• Zoro Select U09150.050.0400 Sleeve Anchor,Hex Nut,Sst,1/2In,4In,Pk10 - Sleeve Anchor, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 4 in, Thread Size 3/8, Min. ZORO SELECT. Zoro Select U04170.062.0500 Grade 8, 5/8"-18 Hex Head Cap Screw, Black Oxide.
• Mkt Fastening 2714134 Wedge Anchor,303/304 Ss,1/4X1 3/4,Pk20 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 1/4 in, Anchor Length 1 3/4 in, Max. Work Thickness 5/8 in, Thread Length 7/8 in, Thread Size 1/4 In.-20, Min.
• Mkt Fastening 2858700 Wedge Anchor,Galv. Steel, 5/8X7,Pk5 - MKT FASTENING 2858700 Wedge Anchor,Galv. Steel, 5/8x7,PK5. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 5/8 in, Anchor Length 7 in, Max. Work Thickness 4 1/4 in, Thread Length 4 in, Thread Size 5/8 In.-11, Min.
• Zoro Select U70420.037.0275 Wedge Anchor,3/8",2-3/4",303/304,Pk25 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 2 3/4 in, Max. Work Thickness 3/8 in, Thread Length 1 1/4 in, Thread Size 3/8 In.-16, Min.
• Zoro Select U70411.050.0375 Wedge Anchor,1/2,3-3/4,Zp Carbn Stl,Pk10 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/2 in, Anchor Length 3 3/4 in, Max. Work Thickness 11/16 in, Thread Length 2 in, Thread Size 1/2 In.-13, Min.
• Zoro Select B09100.075.0425 Sleeve Anchor,Hex Nut,3/4" Dia.,Pk36 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 3/4 in, Anchor Length 4 1/4 in, Thread Size 5/8, Min. ZORO SELECT. Piusi F21863000 Container Valve,Rpv,6" L,3" Dia. General Purpose.
• Mkt Fastening 1720000 Sleeve Anchor, 5/8 X 6In, Pk5 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 6 in, Thread Size 1/2-13, Max. Work Thickness 4 in, Min. MKT FASTENING. & Recepticles.
• Mkt Fastening 2534100 Wedge Anchor,Gr 5,3/4 X10 In,Pk15 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/4 in, Anchor Length 10 in, Max. Work Thickness 5 7/8 in, Thread Length 2 in, Thread Size 3/4 In.-10, Min.
• Mkt Fastening 1713Ss0 Sleeve Anchor, 3/8 X 3In, Pk5 - Sleeve Anchor, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 3 in, Thread Size 5/16-18, Max. Work Thickness 1 3/4 in, Min. MKT FASTENING. Hubbell Wiring Device-Kellems Ig2810 30A Isolated Ground Locking Receptacle 4P.
• Mkt Fastening 1721000 Sleeve Anchor, 3/4 X 2-1/2In, Pk5 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/4 in, Anchor Length 2 1/2 in, Thread Size 5/8-11, Max. Work Thickness 1/2 in, Min. MKT FASTENING. & Recepticles.
• Mkt Fastening 1714Ss0 Sleeve Anchor, 1/2 X 2-1/4In, Pk5 - Zoro Select U38869.018.0875 O-Ring,Dash 372,Epdm,0.21 In.,Pk5. Sleeve Anchor, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 2 1/4 in, Thread Size 3/8-16, Max.
• Mkt Fastening 1765000 Sleeve Anchor, 1/4 X 2In, Pk50 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 2 in, Thread Size 3/16-24, Max. Work Thickness 1 in, Min. MKT FASTENING. & Recepticles.
• Mkt Fastening 1706Ss0 Sleeve Anchor, 1/4 X 2-1/4In, Pk10 - Sleeve Anchor, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 1/4 in, Anchor Length 2 1/4 in, Thread Size 3/16-24, Max. Work Thickness 1 1/4 in, Min. MKT FASTENING. Zoro Select M01210.040.0008 Class 8.8, M4-0.70 Hex Head Cap Screw, Zinc Plated.
• Mkt Fastening 1704000 Sleeve Anchor, 1/4 X 5/8In, Pk100 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 5/8 in, Thread Size 3/16-24, Max. Work Thickness 1/16 in, Min. MKT FASTENING. Campbell Chain & Fittings 3924215Pl Eye Hoist Hook W/ Latch, Pl, #22, 1 Ton.
• Mkt Fastening 1789000 Sleeve Anchor, 1/4 X 2In, Pk50 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 2 in, Thread Size 3/16-24, Max. Work Thickness 1 in, Min. MKT FASTENING. & Recepticles.
• Zoro Select B09100.031.0250 Sleeve Anchor,Hex Nut,5/16" Dia.,Pk400 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 5/16 in, Anchor Length 2 1/2 in, Thread Size 1/4, Min. ZORO SELECT. General Purpose. Taymac Mm710c 1 -Gang Multi-Directional While In Use Weatherproof Cover, 4" W.
• Zoro Select B09100.050.0300 Sleeve Anchor,Hex Nut,1/2" Dia.,Pk140 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 1/2 in, Anchor Length 3 in, Thread Size 3/8, Min. ZORO SELECT. Piusi F21863000 Container Valve,Rpv,6" L,3" Dia. General Purpose. & Recepticles.
• Zoro Select B09100.050.0225 Sleeve Anchor,Hex Nut,1/2" Dia.,Pk170 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 1/2 in, Anchor Length 2 1/4 in, Thread Size 3/8, Min. ZORO SELECT. General Purpose. & Recepticles. Electrical Outlets. Light Industrial.
• Zoro Select B09100.031.0300 Sleeve Anchor,Hex Nut,5/16" Dia.,Pk350 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 5/16 in, Anchor Length 3 in, Thread Size 1/4, Min. ZORO SELECT. Zoro Select B38130.037.0001 Flat Washer, Fits Bolt Size 3/8 In Steel, Zinc.
• Mkt Fastening 1788000 Sleeve Anchor, 1/4 X 1-1/4In, Pk50 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 1 1/4 in, Thread Size 3/16-24, Max. Work Thickness 1/4 in, Min. MKT FASTENING. Westward 30Xp80 Mig Welding Wire,Silicon Bronze,0.045 In.
• Mkt Fastening 1712Ss0 Sleeve Anchor, 3/8 X 1-7/8In, Pk5 - Sleeve Anchor, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 1 7/8 in, Thread Size 5/16-18, Max. Work Thickness 5/8 in, Min. MKT FASTENING. & Recepticles.
• Mkt Fastening 2578600 Wedge Anchor,Gr 5,7/8 X 6 In,Pk10 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 7/8 in, Anchor Length 6 in, Max. Work Thickness 1 1/8 in, Thread Length 2 1/4 in, Thread Size 7/8 In.-9, Min.
• Zoro Select U70411.087.0600 Wedge Anchor,7/8",6",Zp Carbon Stl,Pk2 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 7/8 in, Anchor Length 6 in, Max. Work Thickness 1 1/8 in, Thread Length 3 1/2 in, Thread Size 7/8 In.-9, Min.
• Zoro Select U70411.050.0850 Wedge Anchor,1/2,8-1/2,Zp Carbn Stl,Pk5 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/2 in, Anchor Length 8 1/2 in, Max. Work Thickness 3 1/8 in, Thread Length 6 3/4 in, Thread Size 1/2 In.-13, Min.
• Mkt Fastening 1334Ss0 Drop-In Anchor,3/4-10X3-3/16In,Pk5 - Drop-In Anchor, Non-Flange, Stainless Steel, Fastener Finish Plain, Anchor Thread Size 3/4 In.-10, Material Grade 304, Anchor Dia. 1 in, Anchor Length 3 3/16 in, Thread Depth 1 1/2 in, Bolt Dia. 3/4 in, Drill Bit Size 1 in, Min.
• Mkt Fastening 2512234 Wedge Anchor,Gr 5,1/2 X2 3/4,Pk50 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 1/2 in, Anchor Length 2 3/4 in, Max. Work Thickness 1/8 in, Thread Length 1 1/2 in, Thread Size 1/2 In.-13, Min.
• 60-QTY, Galvanized Wedge Anchors, 1/2 X 4-1/4", No Nut Or Washers, Free Shipping - 60-QTY, Galvanized Wedge Anchors, 1/2 X 4-1/4", No Nut Or Washers, Free Shipping.
• Canada B-400 1/4 x 2" Nylon Nail Anchor-Mushroom Head Zinc New Box/100
• Grip Rite N25200RL 1/4 x 2" Nylon Nail Anchor-Mushroom Head Zinc New Box/100
• (15) Concrete Wedge Anchors Zinc Plated Masonry Anchors - 1/2"-13 x 7" [B4S4]
• (25) Concrete Wedge Anchors Zinc Plated Masonry Anchors - 1/2"-13 x 4-1/2" [C3S5
• Pack Of 10 Simpson Strong-Tie WA505124SS 304 Stainless Steel Wedge Anchor - Excellent Pricing.
• 100 Round Head 1/4 " x 1 1/2 " Split Drive Anchors Concrete Nail-In Hammer-In
• 3/8"x6” Flat Head Phillips Sleeve Anchor Zinc Plate Strong Tie Lock Bolt 10 Pack - The bolts are zinc plated carbon steel. These bolts are used for concrete, masonry, brick, block, mounting base plates, fixtures, structural connections, door jambs, windows, etc.
• Power-Bolt PB+ Heavy Duty Sleeve Anchor 1/2" OD x 3" - Qty 2
• NOS Lot of Marksmen ThundeR Anchor Bolt Stud 1/4" X 4-1/2 - Receive only what is pictured/listed.
• QTY=25:ANCHOR 157220 1/2"-13x5 1/2" ULTRAWEDGE+ ANCHOR STEEL ZINC CR+3 - See photos. Most boxes have been opened for inspection and photos. In the event that any clauses or phrases contained here within are ruled out by a judge, the law, a lawyer, jurors, and or any other entity all others remain in effect.
• Box of 10 Wej-It Concrete Wedge Anchors 1/2" X 3 1/2" Item # Z1232 NEW
• Hilti Kwik Bolt II Concrete Stud Anchor Bolt 1/2" x 2-3/4" LOT of 50 BOLT02 - You will NOT receive the surface that the item is sitting on or any other things that may be visible in the photo. (50) Bolts. (50) Washers.
• Hilti Kwik Bolt II Concrete Stud Anchor Bolt 1/2" x 2-3/4" LOT of 25 BOLT01 - You will NOT receive the surface that the item is sitting on or any other things that may be visible in the photo. (25) Bolts. (25) Washers. Includes the following.
• 5/8"-11 Drop In Anchors Simpson DIA62 Box of 17 Simpson strong tie anchor syst
• Hilti KWIK Bolt TZ Expansion Anchor- 304 SS- KB-TZ 1/2" x 4-1/2" - Hilti KWIK Bolt TZ Expansion Anchor. 304 Stainless Steel.
• Concrete Sleeve Anchor 1/2" x 4" Hex Nut (Qty.10) - 1/2" x 4" Concrete Sleeve Anchor Hex Nut. Material: Carbon Steel - Zinc Plated. Quantity: 10. New Material Bought in Bulk.
• M6 to M20 Sleeve Anchor Expanding Bolts Concrete Through Bolts A4 316 Stainless - M6, M8, M10, M12, M14, M16, M18, M20. Wall Floor Anchors Expanding Bolts Sleeve Anchor Through Bolts Wedge Anchors for Masonry Concrete Brick. ● Thread Size:M6,M8,M10 ,M12,M14 ,M16 ,M18 ,M20. ● Material:A4 Stainless Steel ( SUS 316 ) ( 316 Stainless Steel ).
• Concrete Hex Head Sleeve Anchors Expanding Bolts M6 M8 M10 M12 A2 304 Stainless - M6, M8, M10, M12. ● Thread Size:M6,M8,M10 ,M12. The maximum tensile strength of M8 series : 1100-1200 kgs. The maximum tensile strength of M12 series : 2300-2500 kgs. The maximum tensile strength of M10 series : 1500-1700 kgs.
• Concrete Through Bolts Sleeve Anchor Expanding Bolts M6 to M20 Color Zinc Plated - M6, M8, M10, M12, M14, M16, M18, M20. Wall Floor Anchors Expanding Bolts Sleeve Anchor Through Bolts Wedge Anchors for Masonry Concrete Brick. ● Thread Size:M6,M8,M10 ,M12,M14 ,M16 ,M18 ,M20. Color Zinc Plated Steel, Length 50mm - 150mm.
• M6 to M20 Sleeve Anchors Expanding Bolts Concrete Through Bolts A2 304 Stainless - M6, M8, M10, M12, M14, M16, M18, M20. Wall Floor Anchors Expanding Bolts Sleeve Anchor Through Bolts Wedge Anchors for Masonry Concrete Brick. ● Thread Size:M6,M8,M10 ,M12,M14 ,M16 ,M18 ,M20. 304 A2 Stainless Steel, Length 50mm - 150mm.
• M6 to M16 Drop in Wedge Anchors Concrete Masonry Fixings A2 A4 304 316 Stainless - Drop in Wedge Anchors Masonry Concrete Fixings A2 Stainless Steel / A4 Stainless Steel / Zinc Plated Iron. M6, M8, M10, M12, M16. ● Size: M6,M8,M10 ,M12, M16 . - A4 Stainless Steel ( SUS 316 ) ( 316 Stainless Steel ).
• 1-1/4" X 9" Powers Stud Wedge Anchor - 1-1/4" X 9" Powers Stud Wedge Anchor.new no box an you are getting one per price.             (HWBRA)
• 1" X 6" Powers Stud Wedge Expansion Anchors,7461 - 1" X 6" Powers Stud Wedge Expansion Anchors,7461.new no box an you are getting one per price.                                                          (RM112)
• Wej-It Ankr-TITE Wedge Anchors, 5/8"x 5", Carbon Steel AT5850 Box of 10 New - Wej-It Ankr-TITE Wedge Anchors, 5/8"x 5", Carbon Steel AT5850 Box of 10 New.
• WEJ-IT 3/4" x 4 1/4" CONCRETE WEDGE ANCHOR BOLTS AT3441 carbon steel ANKR-TITE - WEJ-IT AT3441. BOX of 10 New Concrete Anchor Bolts.
• RED HEAD 3/4" x 4 1/4" CONCRETE WEDGE ANCHOR BOLTS WS-3442 carbon steel TRUBOLT - BOX of 10 New Concrete Anchor Bolts. ITW Red Head USA WS-3442.
• Red Head WS-3836 Trubolt Carbon Steel Wedge 3/8" by 3-3/4" Anchor (49 per box)
• Concrete Anchors - 1/2" x 7" Cobra 504G Parawedge - 4 Pack - 2 per bag, 2 bags per order. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete. Parabolic curve for a smoother expansion. Length identification mark stamped on the head of the anchor.
• HEAVY DUTY HD ANCHOR SCREWS 5/8” X8 FOR THDB62800HR10 LOT Of 10 - HEAVY DUTY HD ANCHOR SCREWS 5/8” X8 FOR THDB62800HR10 LOT Of 10.
• 6-Lot 3/4 in. x 10 in. Parawedge Anchor - 6-Lot 3/4 in. x 10 in. Parawedge Anchor.
• 3/4X5-1/2 Wedge Anchor Bolt (Pack of 5) SP101310 - Drive Wedge Anchor into drilled hole through fixture until nut is flush with fixture. Anchoring is now complete. Work confidently knowing you can rely on Heads and Threads for the premium fasteners, hardware, screws, nuts and bolts, as well as other MRO related products your organization needs to keep it up and running.
• Red Head 5-1/2in. x 1/2 in. Wedge Anchor (1 pc.) - Red Head 5-1/2in. Wedge Anchor (1 pc.).
• ULINE H-2121, Floor Anchor Kit, Concrete Installation Kit for Safety Guards, 4 - ULINE H-2121, Floor Anchor Kit, Concrete Installation Kit for Safety Guards, Qty 4 Also, Includes 4 Flat Washers. (Tools Needed: 7/8" Masonry Drill Bit. Not Included) Thanks for looking!
• 1/4 X 1-1/2 Split Drive Pins Lot Of 141 Ea (Item #2745) - LOT OF 141 EA (2 PARTIAL BOXES COMBINED). 1/4 X 1-1/2 SPLIT DRIVE PINS.
• 1/4 X 3-1/4 Wedge Anchors Lot Of 50 Ea (Item #2743) - 1/4 X 3-1/4 WEDGE ANCHORS. LOT OF 50 EA, UNUSED SURPLUS IN GOOD CONDITION.
• 3/4 X 5-1/2" Concrete Sleeve Anchors, Lot Of 8 Ea (Item #2740) - 3/4 X 5-1/2" CONCRETE SLEEVE ANCHORS, LOT OF 8 EA. SLEEVE IS 1.00 IN DIA.
• 3/4 X 5-1/2" Wedge Anchors, Lot Of 8 Ea (Item #2739) - 3/4 X 5-1/2" WEDGE ANCHORS, LOT OF 8 EA.
• 1/2 X 4-1/2" Wedge Anchors, Lot Of 12 Ea (Item #2738) - 1/2 X 4-1/2" WEDGE ANCHORS, LOT OF 12 EA. UNUSED SURPLUS IN GOOD CONDITION (PARTIAL BOX).
• 1/2 X 2" Steel Drop-In Anchor, Box Of 35 Ea (Item #2737) - 1/2 X 2" STEEL DROP-IN ANCHOR, BOX OF 35 EA.
• 3/4 X 3-3/16 Steel Drop-In Anchor, Box Of 10 Ea (Item #2736) - 3/4 X 3-3/16 STEEL DROP-IN ANCHOR, BOX OF 10 EA.
• 3/8 X 2-1/4" Wedge Anchors, Lot Of 24 Ea (Item #2735) - 3/8 X 2-1/4" WEDGE ANCHORS, LOT OF 24 EA. UNUSED SURPLUS IN GOOD CONDITION (PARTIAL BOX).
• 1/2 X 3-3/4" Seismic Wedge Anchors, Lot Of 26 Ea (Item #2734) - 1/2 X 3-3/4" SEISMIC WEDGE ANCHORS, LOT OF 26 EA. UNUSED SURPLUS IN GOOD CONDITION (PARTIAL BOX).
• 3/8 X 3" Wedge Anchors, Lot Of 42 Ea (Item #2733) - 3/8 X 3" WEDGE ANCHORS, LOT OF 42 EA. RED HEAD TRUBOLT GWS-3830.
• 3/4 X 7-1/2" Wedge Anchors, Lot Of 10 Ea (Item #2732) - 3/4 X 7-1/2" CONCRETE SLEEVE ANCHORS, LOT OF 10 EA.
• 20 – MKT SZ-B 18/14, M 16325301 Wedge Anchor, Steel, M12, 152mm. NEW in Box – No - This sale is for 20 – MKT SZ-B 18/14, M 16325301 Wedge Anchor, Steel, M12, 152mm. Thread Size M12. Wedge Anchor Type Wedge Anchor. Item Wedge Anchor Stud. Anchor Material Steel. Anchor Length 152 mm.
• Stainless Anchor "L" Bolt Pole Light
• Sanko Big Anchor Nsb-1625, 24Mm X 160 Mm Oal Box Of 7 Ea (Item #2727) - SANKO BIG ANCHOR NSB-1625, 24MM X 160 MM OAL PARTIAL BOX OF 7 EA.
• Sanko Big Anchor Nsb-1625, 24Mm X 160 Mm Oal Box Of 10 Ea (Item #2726)
• 12- Red Head WW-3454 Trubolt Stainless Steel Wedge 3/4-Inch by 5-1/2-Inch Anchor - Box of 12- Red Head WW-3454 Trubolt Type 304 Stainless Steel Wedge 3/4-Inch by 5-1/2-Inch Anchor
• 3 Packs Red Head Wedge Anchor 3/8" x 3 3/4" For Heavy Concrete 50073 NEW
• DeWalt 3/4" x 5-1/2" 304 SS Power-Stud Wedge Expansion Anchor - Lot of 15 - Lot of 15 DeWalt 3/4" x 5-1/2" 304 SS Power-Stud Wedge Expansion Anchor - New in box but box is torn apart, as pictured.
• Js 38 - M Nla 3/8 X 3 3/4 Stud Anchor - JS 38 - M NLA 3/8 X 3 3/4 STUD ANCHOR (AS SHOWN). UP FOR SALE IN ONE (1) JS38-M.
• Lot of Concrete Anchor Bolts
• (LOT OF 4) J-Hook Anchor for Wet Concrete 1"-8 Thread, 15" Length - (LOT OF 4) J-Hook Anchor for Wet Concrete 1"-8 Thread, 15" Length.
• Litt Industries Heavy Duty Rigid Toolbox Mounts for Polaris RZR / XP / Turbo UTV - Heavy Duty Rigid Toolbox Mounts for RZR XP / Turbo / Turbo S. Includes all oversized rubber feet and all hardware needed to complete install. Note: The Gen 1.0 toolbox has been discontinued. Do not buy this mount unless you ALREADY HAVE A GEN 1.0 TOOLBOX.
• Litt Industries HD Milwaukee Packout Mount for Polaris RZR XP or Turbo / Turbo S - They use the lock n ride holes pictured here. We suggest using our "Stud" anchors for a more secure mounting point, and ease of use. NOTE: The top shelf is needed to use the bottom tray. FITS: Polaris RZR 2014-2022 XP 1000 and Turbo / S Models.
• 4x Rawl Concrete Sleeve Anchors 3/4" X 5” - 4x Rawl Concrete Sleeve Anchors 3/4" X 4-1/4”You will receive 4 Rawl Concrete Sleeve Anchors 3/4" X 4-1/4”Condition is NewShipped FREE
• (50) Hilti 3/8" x 2-1/2" Kwik Bolt 1 Carbon Steel Zinc Plated Concrete Anchor
• ITW WS-34120 Trubolt Wedge Anchor 3/4" x 1/2" - Lot of 4 - Lot of 4 ITW WS-34120 Trubolt Wedge Anchor 3/4" x 1/2" - New in box but box has lots of shelf wear, as pictured. 10 Washers.
• Red Head HN-5860 Dynabolt Hex Nut 5/8-Inch by 6-Inch Sleeve Anchor (10 per Box) - Item is new in original box.
• Red Head HN-5822 Dynabolt Hex Nut 5/8-Inch by 2-1/4 Inch Sleeve Anchor 25 Box - Item is new in original box.
• 200 !!! U S Anchor 1/4" x 2-3/4" Zinc Plated Round Head Sleeve Anchors
• 200 !!! U S Anchor 1/4" x 2" Zinc Plated Flat Head Sleeve Anchors
• 100 !!! U S Anchor 1/4" x 3" Zinc Plated Flat Head Sleeve Anchors
• 100 !!! U S Anchor 1/4" x 4" Zinc Plated Flat Head Sleeve Anchors
• 105 !!! U S Anchor 3/8" x 2-3/4" Zinc Plated Flat Head Sleeve Anchors
• 50 !!! U S Anchor 3/8" x 5" Zinc Plated Flat Head Sleeve Anchors
• 100 !!! U S Anchor 3/8" x 4" Zinc Plated Flat Head Sleeve Anchors
• BoltHold SP12-38 Asphalt Anchor for 3/8" Bolts 2000 lb. Pull Rated. (6 Pack) - BoltHold SP12-38 Asphalt Anchor for 3/8" Bolts 2000 lb. Pull Rated. (6 Pack). This is just the bolts .
• 5/8" x 6" Wedge Anchor | Hot Dip Galvanized | with Hex Nut and Flat Washer| 10pc - Head Type: Hex Nut with Flat Washer, Finish: Hot Dip Galvanized. Are you looking for a 5/8" x 6" Wedge Anchors for a new project?. Look no further because our Decorex Hardware Wedge Anchors have been forged to give you construction reliability for all your building projects.
• 1 Wedge Anchor Bolt 1/2" x 5 1/2" Nut Washer Stainless Steel 304 - 1 Stainless Steel Wedge Anchor Bolt Set. 304 Stainless steel Bolt, with 1 washer and Nut, (all stainless steel).
• 1 Wedge Anchor Bolt 1/2"x7" Nut Washer Stainless Steel Red Head Ramset Trubolt - 1 Readhead Stainless Steel Wedge Anchor Bolt Set. 304 Stainless steel Bolt, with 1 washer and Nut, (all stainless steel).
• fischer High Performance Concrete Sleeve Anchors, FH II 18/25 S, 4 pk - The fischer high-performance anchor FH II-B with threaded bolt is a sleeve anchor made from zinc-plated steel. The FH II B is ideal for anchoring cantilevers, steel constructions and cable trays in cracked and non-cracked concrete.
• Sammys 1" for steel Drilling Rod Anchors New Box Of 25 L@@K W@W Great Deal - Sammys 1" for steel Drilling Rod Anchors New Box Of 25 L@@K W@W Great Deal.
• Full Box HILTI KB3 3/4x7 Steel Wedge Anchors All Assorted Sizes, SS, Steel & Gal - Big lot as long as they fit onto a large (total 69 pounds ) USPS box. As many of: 12 SS 3/4 x 710 SS 3/4 x 811 3/4 x 717. 3/4 x 5-1/2”5. 1/2” x 8” no nuts12 Gal. 3/4 x 516 SS. 1/2 x 4-1/412 steel. 3/8” x 3”14 steel. 3/8 x 4”21 SS. 3/8” x 3-3/4”
• (24) 3/4x 4 1/4 Concrete Red Dot Anchors Slightly Weathered - (24) 3/4x 4 1/4 Concrete Red Dot Anchors Slightly Weathered. Buyer to supply their own washer and nuts. Slightly weather in but still very good
• concrete anchors wall expandable anchors toggle bolts lag shields sleeves mixed - This is a mixed lot. ICE HOCKEY. PAINT SPRAYER ACCESSORIES. WOOD PLANES. TODDLERS / CHILDREN'S CLOTHING. SPORTING GOODS. POOL ACCESSORIES FOUNTAINS. OFFICE SUPPLIES.
• 10pc Powers Blue Tip Wedge-Bolt + Heavy Duty Concrete Anchor 5/8" x 4" - For your consideration is a lot of 10pc Powers Blue Tip Wedge-Bolt + Heavy Duty Concrete Anchor 5/8" x 4".
• BOX OF 15 Hilti KWIK Bolt TZ Exp. Anchor 387516 Steel - KB-TZ 5/8" x 4-3/4" - Part Number‎387516. Manufacturer‎Hilti. Item model number‎Exp anchor KB-TZ. Especially Suited for Seismic and Cracked Concrete Applications. Usage‎Concrete. 1-BOX OF 15 ANCHORS PER ORDER. Rounded End for Easy Installation.
• Festo ZBH-9 Centering Sleeve 150927 ! NOP !
• 100 !! U S Anchor 3/8" x 2-1/2" Round Head Zinc Plated Sleeve Anchors
• FIFTY !! U.S. Anchor 3/8" x 3-3/4" Round Head Sleeve Anchors
• 6-Lot 3/4 in. x 10 in. Parawedge Anchor - 6-Lot 3/4 in. x 10 in. Parawedge Anchor.
• Mkt Fastening 2534812 Wedge Anchor,Gr 5,3/4 X8 1/2,Pk15 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/4 in, Anchor Length 8 1/2 in, Max. Work Thickness 4 3/8 in, Thread Length 2 in, Thread Size 3/4 In.-10, Min.
• Mkt Fastening 2514314 Wedge Anchor,Gr 5,1/4X3 1/4,Pk100 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 3 1/4 in, Max. Work Thickness 1 7/8 in, Thread Length 2 1/4 in, Thread Size 1/4 In.-20, Min.
• MKT FASTENING 2719000 Wedge Anchor,303/304 SS,1x9,PK5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 1 in, Anchor Length 9 in, Max. Work Thickness 4 1/2 in, Thread Length 2 1/4 in, Thread Size 1 In.-8, Min. Embedment 4 1/2 in, Embedment In Concrete 4 1/2 in, Ultimate Pullout (Lb.) 15,829 lb, Ultimate Shear (Lb.) 28,023 lb, Ultimate Shear in 3000 PSI Concrete (Lb.) 28,023 lb, Ultimate Shear in 4000 PSI Concrete (Lb.) 28,023 lb, Ultimate Tension (Lbs.) 15,829 lb.
• Ppower Fasteners 3/8X3" Wedge Anchors **Lot Of 27** - POWER FASTENERS 3/8X3" WEDGE ANCHORS. THREAD SIZE- 3/8"-16". THREAD LENGTH-1-7/8". LOT OF 27 .
• Powers 7404Sd1 1/4"X3-1/4 Pwerstrut Sd1 Wedge Anchors **Lot Of 76** - PWERS 7404SD1 1/4"X3-1/4" POWERSTUD SD1 WEDGE ANCHORS. LOT OF 76 . THREAD LENGTH 2-1/4".
• DeWalt Power-Stud HDS 7723HD5 "SINGLE" (ANCHOR, WASHER, & NUT) 1/2" X 4 1/2"
• 100pc Hillman Powers Wedge-Bolt Heavy Duty Concrete Anchor 1/4"x1-1/4" 372150 - 1/4"x1-1/4" Part # 372150. 100pc Hillman Powers Wedge-Bolt + Heavy Duty Concrete Anchor.
• 95 pcs. ITW Red Head TRUBOLT Wedge Anchor Stainless Steel 1/4 x 2 1/4" WW-1422 - 95 pcs. ITW Red Head TRUBOLT Wedge Anchor Stainless Steel 1/4 x 2 1/4" WW-1422.
• 92 pcs. ITW Red Head TRUBOLT Wedge Anchor Stainless Steel 1/4 x 2 1/4" WW-1422 - 92 pcs. ITW Red Head TRUBOLT Wedge Anchor Stainless Steel 1/4 x 2 1/4" WW-1422.
• 20 pcs. HILTI HDI 3/4 SS (303) 3/4" Flush Wedge Anchors - 20 pcs. HILTI HDI SS (303) Flush Wedge Anchors. If you don't need the HILTI box, I can fit all 20 anchors in a USPS small flat rate box for $8 shipping.
• 59x HILTI KB3 C 1/4 x 3 SS 304
• Sammys 8060925 for Concrete Brand New 25 pieces per box - Sammys 8060925 for Concrete Brand New 25 pieces per box.
• 91 PCS 5/16" x 2-1/2" Hilti Sleeve Masonry Anchors NEW - Pictures may be representative. We are not responsible for any inaccurate information or specs that may have been changed. Excellent communication!
• Bluff Manufacturing Wedge Concrete Anchors **Lot Of 12** - LOT OF 12 . YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE. 5/8 - 10 X 5 1/2.
• WEJ-IT 3/4" D 3/4" Drill 5-1/2" OAL Concrete Anchor LOT OF 24 - If you are not able to pick up locally, we are able to get competitive freight quotes as well.
• 26 Assorted 1/2" Concrete Expansion &Sleeve Anchor Bolts Nuts & Washers. 3"- 6" - 26 Assorted Concrete Anchors. Includes nuts and washers. Sleeved and Expansion. with Federal, State and Local laws where you live. that you are 18yrs. of age or older and the item is in compliance.
• WEJ-IT Z1223 Wedge Anchor 1/2" x 2-3/4" Lot Of 30 - --- New Surplus--Opened Factory Box----8/21/WW.
• Concrete Bent Anchor Bolts 1” x 36” x 4” Partial Hot Galvanized, Lot Of 24 - Concrete Bent Anchor Bolts 1” x 36” x 4” Partial Hot Galvanized, Lot Of 24. SEE PHOTOS FOR DETAILS
• (100 pcs) 4-1/4" Steel Wedge Anchor 1/2" Dia Zinc Plated Fabory 31JP19 - 1/2" Dia Zinc Plated Fabory 31JP19. (100 pcs) 4-1/4" Steel Wedge Anchor. We appreciate your cooperation. We will make every attempt possible to resolve the issue if we made a mistake, (It happens).
• (5) Dewalt Powers Expansion Wedge Anchor 7473SD1-PWR, Steel, 1-1/4" x 9" - Expansion Wedge Anchor. ICC Approved for Cracked Concrete. ICC Approved for Un-Cracked Concrete. Anchor Material Steel. New, never used. Open box, complete set of (5) fasteners. Maximum Work Thickness 2 3/8 in.
• 5/8" x 3" Hex Nut Sleeve Anchor Steel Zinc - Head Hex Nut. Application Concrete, masonry, block, brick anchoring, mounting baseplates, fixtures, structural connections. Type Sleeve Anchor. Finish Zinc. Material Steel.
• Read Head # 11272 1/2" X 4-1/4" WEDGE ANCHORS HEAVY DUTY Pk Of 21
• TFC Triangle Fastener Corp. Masonry Anchors - TFC Triangle Fastener Corp. Masonry Anchors. Nail In Anchors. Therefore, If i have misidentified an item your input would be greatly appreciated.
• Blue Hawk 0017671 Heavy Duty Sleeve Anchors 4 Piece Masonry Free shipping - Blue Hawk 0017671 Heavy Duty Sleeve Anchors 4 Piece Masonry Free shipping.
• (Box-100) 1/4" x 1-3/4" Simpson Strong Tie Wedge-All Heavy Duty Anchors WA25134 - Box of 100 (Includes Washer and Hex Nut). Prop. 65Yes. Model #WA25134. Finish CoatingZinc Plated. MaterialCarbon Steel.
• Anchor #4070 Machine Screw Expansion Anchors 3/4" Drill x 3/8"-16 (Pack of 5)
• Itw Red Head Hn-5860 5/8"X6" Zp Dynabolt Sleeve Anchor ** Case Of 50Ea ** - ITW Ramset RED HEAD HN-5860 5/8"X6" ZP DYNABOLT SLEEVE ANCHOR CASE OF 50EA .
• Itw Red Head Ldt-3444 3/4"X4-1/2" Zp Ldt Anchor ** Case Of 50Ea **
• Itw Red Head Hn-3462 3/4"X6-1/4" Zp Dynabolt Sleeve Anchor ** Box Of 5Ea ** - ITW Ramset RED HEAD HN-3462 3/4"X6-1/4" ZP DYNABOLT SLEEVE ANCHOR BOX OF 5EA .
• Itw Red Head Hn-5860 5/8"X6" Zp Dynabolt Sleeve Anchor ** Box Of 10Ea ** - ITW Ramset RED HEAD HN-5860 5/8"X6" ZP DYNABOLT SLEEVE ANCHOR BOX OF 10EA .
• Itw Red Head Ldt-3444 3/4"X4-1/2" Zp Ldt Anchor ** Box Of 10Ea **
• (40) 3/8 X 1 7/8“ Sleeve-All Concrete Sleeve Anchors ~ Simpson Strong-Tie - (40) 3/8 X 1 7/8“ Sleeve-All Concrete Sleeve Anchors ~ Simpson Strong-Tie.
• Red Head Trubolt Wedge Anchors, Gws-3484, 3/4" X 8-1/2" ** Lot Of 12 ** - TRUBOLT WEDGE ANCHORS. BOX OF 12 . MODEL: GWS-3484. YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE.
• 1/2"-13 X 2 3/4" Wedge Anchors, 304 Stainless Steel 50 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• Lot of Anchor setting tools Mixed Total 5 - 3 @ 5/8"; 1 @ 7/16"; 1 @ 3/16" FFF - Anchor setting tools Mixed Lot 3 @ 5/8; 1 7/16 and 1 3/16.
• Lot Anchor setting tools - 5/16 inch head 7 pieces (C) - 5 unmarked.
• Lot of Anchor setting tools - 5/8 inch head; 10 pieces in lot (F)
• Lot of Anchor setting tools 9 pieces - 5/16 head - 8 inches long Lot D
• Lot of Anchor setting tools - 8 pieces - 7/16 inch head E
• New (100) Hilti Expansion Anchor Kb3 Ss304 1/4"X 3-1/4" #282541 Stainless Steel - NEW Sealed Box (100) HILTI EXPANSION ANCHOR KB3 SS304 1/4"X 3-1/4" #282541 STAINLESS STEEL With Nuts and Washers
• 1/2"-13 X 4 1/4" Wedge Anchors, 304 Stainless Steel 25 Pieces - WEDGE ANCHORS. 304 STAINLESS STEEL. DISCOVER CARD.
• 100- hilti 00045753 3/8" drop in anchors b-24
• 22- Hillman Rl-34 Hex Head 3/4" Drop In Ancors B-18 - 22- HILLMAN 3/4" DROP IN ANCORS.
• Asphalt Anchor BoltHold SP18-716 6-PACK
• (Box of 10) Red Head Concrete Sleeve Anchors 5/8" x 4-1/4" HN5842 - Model: HN5842. Dynabolt Sleeve Anchors Specified for Anchorage into Concrete, Grout-Filled Concrete Block, Hollow Concrete Block and Brick. Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer Anchors are made of Plated Carbon Steel, or Type 18-8 Stainless Steel.
• Wedge Anchors 3/8”x 5 1/2" Quantity 8 Concrete Anchors - Wedge Anchors 3/8”x 5 1/2" Quantity 8 Concrete Anchors.
• 5/8X6 Masonry Anchor (Pack of 10) SP101261 - Size :5/8X6 ". Type :Wedge Anchor. Thread Length :4 ". Proof Test Load :4,800 lb. Work confidently knowing you can rely on Heads and Threads for the premium fasteners, hardware, screws, nuts and bolts, as well as other MRO related products your organization needs to keep it up and running.
• PFC Steel Ultrawedge Anchor 3/4"-10 X 7" Lot of 10 New - Steel Ultrawedge Anchor. If your item is received in a different condition than stated (DOA, not working properly etc. NEW, in box. NEW, no box. NEW, old inventory. • Freight, etc. • Local pick up. ).
• Brighton-Best Ultrawedge Anchor 3/4"-10x10" Steel Zinc CR-3 Lot of 10 New - Brighton-Best Ultrawedge Anchor. Steel Zinc CR-3. USED, but in good working condition. Removed from closed plant. If your item is received in a different condition than stated (DOA, not working properly etc. ).
• ITW Red Head/Stainless Steel Trubolt Wedge Anchors 3/8 x 3" WW-3830 - 50 pcs in box.
• 1/4"-20 X 1 3/4" Wedge Anchors, 304 Stainless Steel 100 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• Sammmys 8055957 - Sammmys 8055957. Case with 5 individual boxes with 25 in each. Total 125 anchors. SWDR 1 for steel. 1” sidewinder w/ nut for 3/8” rod.
• Hilti HDI 3/8” drop in concrete anchors, 40 pcs, 1/2” bit size, 1-9/16”long - Hilti HDI 3/8” drop in concrete anchors, 40 pcs, 1/2” drill bit size. 1-9/16” long
• Sammys 8023925 Sidewinder for Wood Brand New 25 per box - Sammys 8023925 Sidewinder for Wood Brand New 25 per box.
• Aluminum Wedge Anchors Lot - Aluminum Wedge Anchors, entire lot of about 90 pieces.
• Hilti HDI 3/8 drop in concrete anchors. Box of 50 - New sealed box of 50 hilti 3/8 HDI concrete anchors. Sae 1110 use 1/2 diameter hilti carbide bit. Underwriters laboratories listed pipe hanger 767G . Threaded expanding drop in masonry  concrete anchor fastener.
• Sammys 8020957 Sidewinder for Wood Brand New 25 per Box - Sammys 8020957 Sidewinder for Wood Brand New 25 per Box.
• Sammys 8002957 for wood Brand New 25 per box - Sammys 8002957 for wood Brand New 25 per box.
• Sammys 801097 for Wood Brand New 25 per Box  - Sammys 801097 for Wood Brand New 25 per Box.
• Sammys 8003957 For Wood Qty:25 NEW 5 Available - Sammys 8003957 For Wood Qty:25 NEW 5 Available.
• MKT FASTENING M14325301 Wedge Anchor,Stl,M12,147mm,PK20 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 18 mm, Anchor Length 147 mm, Max. Work Thickness 40 mm, Thread Size M12 x 1.75mm, Min. Embedment 80 mm, Embedment In Concrete 80 mm, Package Quantity 20.
• MKT FASTENING M14315301 Wedge Anchor,Stl,M12,127mm,PK20 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 18 mm, Anchor Length 127 mm, Max. Work Thickness 20 mm, Thread Size M12 x 1.75mm, Min. Embedment 80 mm, Embedment In Concrete 80 mm, Package Quantity 20.
• SUP-R STUD 2414134 Wedge Anchor,Carb. Stl,1/4"x1-3/4",PK100 - Wedge Anchor,Carb. Stl,1/4 In.x1-3/4 In.,PK100, Package Quantity 100.
• SUP-R STUD 2414314 Wedge Anchor,Carb.stl,1/4"x3-1/4",PK100 - Wedge Anchor,Carb.stl,1/4 In.x3-1/4 In.,PK100, Package Quantity 100.
• SUP-R STUD 2434700 Wedge Anchor,Carb. Stl,3/4"x7",PK15 - Wedge Anchor,Carb. Stl,3/4 In.x7 In.,PK15, Package Quantity 15.
• MKT FASTENING 2778800 Wedge Anchor,303/304 SS,7/8x8,PK4 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 7/8 in, Anchor Length 8 in, Max. Work Thickness 4 in, Thread Length 2 1/4 in, Thread Size 7/8 In.-9, Min. Embedment 4 in, Embedment In Concrete 4 in, Ultimate Pullout (Lb.) 13,902 lb, Ultimate Shear (Lb.) 21,574 lb, Ultimate Shear in 3000 PSI Concrete (Lb.) 21,574 lb, Ultimate Shear in 4000 PSI Concrete (Lb.) 21,574 lb, Ultimate Tension (Lbs.) 13,902 lb.
• 2 units of Threshold SLEEVE ANCHOR. 1/4 X 2 1/4 REDHEAD brand. Quick USA ship. - 2 units of Threshold SLEEVE ANCHOR. 1/4 X 2 1/4 REDHEAD brand. Quick USA ship..
• FIFTY !! U.S. Anchor 3/8" x 6" Flat Head Sleeve Anchors
• Sup-R-Stud 303/304 Stainless Steel Mechanical Wedge Anchor, 1"-8 Thread 12" .TF - (E) Two special notes.
• 3/8 X 2-3/4” WEJ-IT Wedge Anchors 2 X 50 Pack, 100 Total - We see it all and are happy to hunt down a great deal for you.
• Blue Hawk 0017671 Heavy Duty Sleeve Anchors 4 Piece Masonry - Product number 0017671. For masonry. Sleeve anchors. 4 anchors plus drill bit. Heavy duty. BluePennyLady is a husband and wife team (Dale and Judy). We have been doing this for 30+ years. We are not a fly-by-night operation.
• MKT FASTENING 6760000 Uni-Tap Mech Anchor,0.281x2-1/8",PK100 - Package Quantity 100.
• 6- Hillman Pop Toggle Ancor Kitsfor Drywall B-293 - 6- HILLMAN POP TOGGLE ANCOR KITS 73 PEICES PER KIT.
• 2- Boxes Hillman 1/2" X 3-1/4" Wedge Ancors 50 Per Box B-42T - 2- BOXES HILLMAN 1/2"X3-1/4" WEDGE ANCORS 50 PER BOX.
• 50- Hillman 1/2" X3-1/4" Wedge Ancors B-42T - 50- HILLMAN 1/2"X 3-1/4" WEDGE ANCORS WASHERS AND NUTS.
• NEW 20 Pack RED HEAD 3/8 in. x 3 in. Hex-Head Sleeve Anchors - NEW!! RED HEAD 3/8 in. x 3 in. Hex-Head Sleeve Anchors (20 Pack). Condition is new. Shipped USPS (D)The listing is for 20 new 3/8” by 3 inch concrete sleeve anchors. Boxes says quantity 50, but they are only 20 brand new in the box. Any questions please ask before bidding
• 1/4"-20 X 3 1/4" Wedge Anchors, 304 Stainless Steel 100 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• Wedge Type Stud Bolt Anchor Steel 3/4 x 5-1/2" (Pack of 5) SP101310 - Type :Wedge Anchor. Application :Concrete. Thread Length :3-1/4 ". Proof Test Load :6,800 lb. Material :Steel. Finish :Zinc. Work confidently knowing you can rely on Heads and Threads for the premium fasteners, hardware, screws, nuts and bolts, as well as other MRO related products your organization needs to keep it up and running.
• 3/4-10 X 5 1/2 Wedge Anchors Hot Dipped Galvanized 20 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 5/8-11 X 7 Wedge Anchors, 304 Stainless Steel 25 Pieces - WEDGE ANCHORS. 304 STAINLESS STEEL. DISCOVER CARD.
• Red Head 1/2"x3" Zinc-Plated Steel Hex-Head Sleeve Anchors (6-Pack) - Red Head 1/2"x3" Zinc-Plated Steel Hex-Head Sleeve Anchors (6-Pack). Box says 10QTY but only has 6QTY
• Vintage Stretch Anchors (4) Total 5/8'' Drill 5/16'' Bolt New Unused - ORIGINAL STRETCH ANCHORS (4). 5/8" DRILL. 5/16" BOLT. NEW UNUSED CONDITION.
• Vintage Anchor Bolts (8) 4'' & 2 3/4'' Steel & Stainless
• Red Head 3/8-in x 1-7/8-in Head Silver Sleeve Anchors (50 Pack)
• 1/2 X 5 WEJ-IT Wedge Anchors 25 Pack - 1/2" X 5" Wej-It Wedge Anchors. WARREN FASTENINGS SOUTH. - Minimizes wedge loosening due to vibratory loads. Exclusive"positive wedge connections". - An industry standard for over 60 years. Looking for another size or quantity?.
• (22) DeWalt Stainless Steel Expansion Anchor 06230-PWR, Drop-In 5/8"-11 x 2-1/2" - (22) DeWalt Stainless Steel Expansion Anchor 06230-PWR, Drop-In 5/8"-11 x 2-1/2". Shipped with USPS First Class. 25 pack that had some shipping damage to the package and 3 of the anchors were lost. 
• Maxi-Bolt 1" x 11 1/2" x 8 3/4" Sleeve Stud Anchor
• Maxi-Bolt 1/2" x 14 1/4" x 10" Sleeve Stud Anchor - NEW Maxi-Bolt 1/2" x 14 1/4" x 10" Sleeve Stud Anchor.
• (Qty 11) 5/8" x 2 1/4" Hex Head Concrete Sleeve Anchor - Concrete Sleeve Anchors. Most of the knives are made of bone and composite materials. prone to cracking. that you are 18yrs. of age or older and the item is in compliance.
• Red Head WS-3484 3/4" x 8-1/2" Trubolt Wedge Anchor 4 count w/ nuts & washers - ITW Red Head WS-3484 3/4" x 8-1/2" Trubolt Carbon Wedge Anchor. Four (4) bolts with washer & nuts. ManufacturerITW Red Head. Part NumberIRHWS3484.
• RED HEAD Tie-Wire Anchors 1/4" x 2-1/8" #TW-1400 (Bonus Pack 114 PCs.) - RED HEAD Tie-Wire Anchors 1/4" x 2-1/8" #TW-1400 (Bonus Pack 114 PCs.).
• Rawl #9675 1/2” Bolt Single Anchors (Box 25) 7/8” Hole - Rawl #9675 1/2” Bolt Single Anchors (Box 25) 7/8” Hole.
• (8) 316sst Concrete Wedge Anchor Bolts 3/4" x 8-1/2" w/ nuts & washer ,lot of 8
• CONCRETE WEDGE ANCHOR-STUD ANCHOR 1/4 x 1 3/4" W/NUT AND WASHER. ZINC 25 PCS. N - FOR SALE ARE 25 ZINC CONCRETE ANCHORS-STUD ANCHORS. WITH NUTS AND WASHERS, 1/4 x 1 3/4".
• (FS) 6pcs, Simpson SL50400H 1/2" x 4" Steel Hex Head Sleeve-All Sleeve Anchors - (FS) 6pcs, Simpson SL50400H 1/2" x 4" Steel Hex Head Sleeve-All Sleeve Anchors.
• (FS) 9 Pcs, Powers Fasteners 1/2" x 4" Wedge Bolt Plus Galvanized - (FS) 9 Pcs, Powers Fasteners 1/2" x 4" Wedge Bolt Plus Galvanized.
• (FS) 10 Pcs, Powers Fasteners 5/8" x 5" Wedge Bolt Plus 07264 Galvanized - (FS) 10Pcs, Powers Fasteners 5/8" x 5" Wedge Bolt Plus 07264 Galvanized. Make an offer!
• (FS) 7 Pcs, Powers Fasteners 5/8" x 5" Wedge Bolt Plus 07264 Galvanized - (FS) 7 Pcs, Powers Fasteners 5/8" x 5" Wedge Bolt Plus 07264 Galvanized.
• Anchor #4050 Machine Screw Expansion Anchors 1/2" Drill x 1/4"-20 (Pack of 20)
• Set of 6 3/8" x 5" flat head sleeve anchor bolts - Set of 6 3/8" x 5" flat head sleeve anchor bolts
• 6 pack of DeWalt Lok-bolt AS 3/8" x 5" Sleeve Anchor Bolts 05350s zinc plated - Pack of 6 DeWalt Lok-bolt AS 3/8" x 5" Sleeve Anchor Bolts 05350s flathead Finish: zinc plated  Anchor material: steel thread size: 5/16"-18 Anchor diameter: 3/8"
• Mkt Fastening M16045301 Wedge Anchor,Stl,M6,167Mm,Pk25 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 10 mm, Anchor Length 167 mm, Max. Work Thickness 50 mm, Thread Size M6 x 1mm, Min.
• * (4 Boxes) Red Head Wedge Anchors 3/8" Dia x 2-1/4"L 15 Pieces Per Box 13015 - Lot of 4 Boxes Red Head Wedge Anchors 3/8" Diameter x 2-1/4" Length, 15-Count Per Box, Model #13015 For heavy duty concrete applications. New. Includes 4 boxes containing 15 each for a total of 60 wedge anchors. 3/8" diameter. 2-1/4" length. The use of a carbide drill bit conforming to ANSI Standard B212.15 is recommended.
• 3/8X2-1/4 Masonry Anchor (Pack of 25) SP101131 - Type :Wedge Anchor. Thread Length :1 ". Proof Test Load :2,420 lb. Work confidently knowing you can rely on Heads and Threads for the premium fasteners, hardware, screws, nuts and bolts, as well as other MRO related products your organization needs to keep it up and running.
• Flyscreen flexi handle
• Hilti Kb3,1/4" X 3-1/4" X 100 Each W/ Nuts And Washers Carbon Steel Pn 282504 - KB3 1/4" X 3-1/4" LG. BOX OF 100 EACH ANCHOR, WASHER AND NUTS. LONG THREADED.
• (50-Pack) Dottie W12234 Zinc Plated Concrete Wedge Anchor Bolt 1/2" x 2-3/4" - Lot Of 50 Dottie W12234 Zinc Plated Full Threaded Wedge Anchor. - 2-3/4" Total Length. - This item is NEW. You will receive a case of 50 pieces.
• Red Head Sww-1254 Wedge Anchor,316 Ss,1/2X5-1/2,Pk25 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 5 1/2 in, Max. Work Thickness 2 3/4 in, Thread Length 3 in, Thread Size 1/2 In.-13, Min.
• MKT FASTENING M14220301 Wedge Anchor,Stl,M10,118mm,PK25 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 15 mm, Anchor Length 118 mm, Max. Work Thickness 25 mm, Thread Size M10 x 1.50mm, Min. Embedment 71 mm, Embedment In Concrete 71 mm, Package Quantity 25.
• Mkt Fastening 1712000 Sleeve Anchor, 3/8 X 1-7/8In, Pk25 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 1 7/8 in, Thread Size 5/16-18, Max. Work Thickness 5/8 in, Min. MKT FASTENING. Rust-Oleum 249340 12 Oz.
• Mkt Fastening 1772000 Sleeve Anchor, 3/8 X 2-3/4In, Pk25 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 2 3/4 in, Thread Size 5/16-18, Max. Work Thickness 1 1/2 in, Min. MKT FASTENING. & Recepticles.
• 5/8" x 6" (15pc Lot) Hex Head Sleeve Anchors Zinc Plated - NEW - Great Buy! - Sleeve Anchor (15pc LOT) Great Buy! 5/8" x 6" Zinc-P lated Steel Hex Head. Another Great Find & a Great Buy from INDUSTRO-SURPLUS.
• MKT FASTENING 6660000 Uni-Tap Mech Anchor,0.281x1-5/8",PK100 - Uni-Tap Mech Anchor,0.281x1-5/8 In.,PK100, Package Quantity 100.
• 5/8" x 3" (25pc Lot) Hex Head Sleeve Anchors Zinc Plated Steel Factory New - Sleeve Anchor (25pc LOT). 5/8" x 3" Zinc P lated Steel Hex Head. Factory New.
• 1/2" x 4" (18pc Lot) Hex Head Sleeve Anchors Zinc Plated Steel Factory New - Sleeve Anchor (18pc LOT). 1/2" x 4" Zinc P lated Steel Hex Head. Factory New.
• 3/8" x 4" (34pc Lot) Flat Head Sleeve Anchors Zinc Plated Steel Factory New - Sleeve Anchor (34pc LOT). Factory New.
• Wedge Anchors 1/4" x 1-3/4" (100pc Lot) Zinc Plated Steel Factory New - Wedge Anchor (100pc LOT). 1/4-20 x 1-3/4" Zinc P lated Steel. Factory New.
• Mkt Fastening 131200L Drop-In Anchor,Flange,1/2-13X2in,Pk25 - Drop-In Anchor, Flange, Steel, Fastener Finish Zinc Plated, Anchor Thread Size 1/2 In.-13, Anchor Dia. 5/8 in, Anchor Length 2 in, Thread Depth 3/4 in, Bolt Dia. 1/2 in, Drill Bit Size 5/8 in, Min.
• Zoro Select U09100.050.0600 Sleeve Anchor,Hex Nut,Cst,1/2In,6In,Pk10 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/2 in, Anchor Length 6 in, Thread Size 3/8, Min. ZORO SELECT. Hubbell Hblfcapbl Cap,Blue,300/400A Female Single Pole.
• Red Head Ww-5884 Wedge Anchor,304 Ss,5/8X8-1/2,Pk10 - Zoro Select 5Tpg6 Double Rod Pegboard Hook,2-13/16 In,Pk10. Zoro Select 5Tpd2 Single Rod Pegboard Hook,4 In,Pk10. Zoro Select 5Tpg4 Single Rod Pegboard Hook,6 In,Pk10. Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia.
• Mkt Fastening 1717000 Sleeve Anchor, 1/2 X 6In, Pk5 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/2 in, Anchor Length 6 in, Thread Size 3/8-16, Max. Work Thickness 4 1/2 in, Min. MKT FASTENING. & Recepticles.
• Mkt Fastening 1710000 Sleeve Anchor, 5/16 X 1-1/2In, Pk50 - Tough Guy 31Dk62 Recycled Trash Bags,60 Gal.,Black,Pk50. Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 5/16 in, Anchor Length 1 1/2 in, Thread Size 1/4-20, Max.
• Mkt Fastening 2714314 Wedge Anchor,303/304 Ss,1/4X3 1/4,Pk20 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 1/4 in, Anchor Length 3 1/4 in, Max. Work Thickness 1 in, Thread Length 2 1/4 in, Thread Size 1/4 In.-20, Min.
• Zoro Select U70420.075.0700 Wedge Anchor,3/4",7",303/304,Pk2 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 7 in, Max. Work Thickness 2 in, Thread Length 4 1/2 in, Thread Size 3/4 In.-10, Min.
• Mkt Fastening 2658412 Wedge Anchor,Zinc Plated,5/8X4 1/2,Pk5 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 4 1/2 in, Max. Work Thickness 1 3/4 in, Thread Length 2 5/8 in, Thread Size 5/8 In.-11, Min.
• Mkt Fastening 2634700 Wedge Anchor,Zinc Plated,3/4X7,Pk5 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/4 in, Anchor Length 7 in, Max. Work Thickness 1/4 in, Thread Length 4 in, Thread Size 3/4 In.-10, Min.
• Mkt Fastening 2638500 Wedge Anchor,Zinc Plated,3/8X5,Pk20 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 5 in, Max. Work Thickness 3 3/8 in, Thread Length 4 in, Thread Size 3/8 In.-16, Min.
• Mkt Fastening 2858312 Wedge Anchor,Galv. Steel, 5/8X3 1/2,Pk5 - MKT FASTENING 2858312 Wedge Anchor,Galv. Steel, 5/8x3 1/2,PK5. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 5/8 in, Anchor Length 3 1/2 in, Max. Work Thickness 3/4 in, Thread Length 1 5/8 in, Thread Size 5/8 In.-11, Min.
• Zoro Select U70420.050.0275 Wedge Anchor,1/2",2-3/4",303/304,Pk10 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 2 3/4 in, Max. Work Thickness 1/8 in, Thread Length 1 in, Thread Size 1/2 In.-13, Min.
• Mkt Fastening 271421S Wedge Anchor,316 Ss,1/4X2 1/4,Pk20 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 1/4 in, Anchor Length 2 1/4 in, Max. Work Thickness 1 1/8 in, Thread Length 1 3/8 in, Thread Size 1/4 In.-20, Min.
• Mkt Fastening 2814214 Wedge Anchor,Galv. Steel, 1/4X2 1/4,Pk20 - MKT FASTENING 2814214 Wedge Anchor,Galv. Steel, 1/4x2 1/4,PK20. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 1/4 in, Anchor Length 2 1/4 in, Max. Work Thickness 1 1/8 in, Thread Length 1 3/8 in, Thread Size 1/4 In.-20, Min.
• Zoro Select U70420.050.0700 Wedge Anchor,1/2",7",303/304,Pk5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 7 in, Max. Work Thickness 3 1/8 in, Thread Length 5 1/4 in, Thread Size 1/2 In.-13, Min.
• Mkt Fastening 2614134 Wedge Anchor,Zinc Plated,1/4X1 3/4,Pk20 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 1 3/4 in, Max. Work Thickness 5/8 in, Thread Length 7/8 in, Thread Size 1/4 In.-20, Min.
• Mkt Fastening 2634614 Wedge Anchor,Zinc Plated,3/4X6 1/4,Pk5 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/4 in, Anchor Length 6 1/4 in, Max. Work Thickness 2 7/8 in, Thread Length 4 1/4 in, Thread Size 3/4 In.-10, Min.
• Mkt Fastening 2612414 Wedge Anchor,Zinc Plated,1/2X4 1/4,Pk10 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 1/2 in, Anchor Length 4 1/4 in, Max. Work Thickness 2 in, Thread Length 3 in, Thread Size 1/2 In.-13, Min.
• Mkt Fastening 2634414 Wedge Anchor,Zinc Plated,3/4X4 1/4,Pk5 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/4 in, Anchor Length 4 1/4 in, Max. Work Thickness 7/8 in, Thread Length 2 3/8 in, Thread Size 3/4 In.-10, Min.
• Mkt Fastening 2712512 Wedge Anchor,303/304 Ss,1/2X5 1/2,Pk10 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 5 1/2 in, Max. Work Thickness 1 in, Thread Length 4 in, Thread Size 1/2 In.-13, Min.
• MKT FASTENING M14005301 Wedge Anchor,Stl,M6,65mm,PK100 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 10 mm, Anchor Length 65 mm, Max. Work Thickness 0 mm, Thread Size M6 x 1mm, Min. Embedment 50 mm, Embedment In Concrete 50 mm, Package Quantity 100.
• Mkt Fastening 1773Ss0 Sleeve Anchor, 3/8 X 4In, Pk5 - Sleeve Anchor, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 4 in, Thread Size 5/16-18, Max. Work Thickness 2 3/4 in, Min. MKT FASTENING. Campbell Chain & Fittings 3924215Pl Eye Hoist Hook W/ Latch, Pl, #22, 1 Ton.
• Mkt Fastening 1774000 Sleeve Anchor, 3/8 X 5In, Pk10 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 5 in, Thread Size 5/16-18, Max. Work Thickness 3 3/4 in, Min. MKT FASTENING. Campbell Chain & Fittings 3924215Pl Eye Hoist Hook W/ Latch, Pl, #22, 1 Ton.
• Mkt Fastening 1775000 Sleeve Anchor, 3/8 X 6In, Pk10 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 6 in, Thread Size 5/16-18, Max. Work Thickness 4 3/4 in, Min. MKT FASTENING. Falltech 8445 Carabiner, Self-Closing And Double-Locking Gate, Steel, Bronze.
• Red Head Ws-1270G Wedge Anchor,Carb. Steel,1/2X7,Pk25 - RED HEAD WS-1270G Wedge Anchor,Carb. Steel,1/2x7,PK25. Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Galvanized, Anchor Dia. 1/2 in, Anchor Length 7 in, Max. Work Thickness 4 1/4 in, Thread Length 5 1/2 in, Thread Size 1/2 In.-13, Min.
• Red Head Sww-1422 Wedge Anchor,316 Ss,1/4X2-1/4,Pk100 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 1/4 in, Anchor Length 2 1/4 in, Max. Work Thickness 7/8 in, Thread Length 1 1/4 in, Thread Size 1/4 In.-20, Min.
• Red Head Ww-5834 Wedge Anchor,304 Ss,5/8X3-1/2,Pk10 - Zoro Select 5Tpg6 Double Rod Pegboard Hook,2-13/16 In,Pk10. Zoro Select 5Tpd2 Single Rod Pegboard Hook,4 In,Pk10. Zoro Select 5Tpg4 Single Rod Pegboard Hook,6 In,Pk10. Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia.
• Red Head Sww-1432 Wedge Anchor,316 Ss,1/4X3-1/4,Pk100 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 1/4 in, Anchor Length 3 1/4 in, Max. Work Thickness 1 1/8 in, Thread Length 2 1/4 in, Thread Size 1/4 In.-20, Min.
• Red Head Sww-1236 Wedge Anchor,316 Ss,1/2X3-3/4,Pk25 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 3 3/4 in, Max. Work Thickness 1 in, Thread Length 2 1/4 in, Thread Size 1/2 In.-13, Min.
• Red Head Ws-3454G Wedge Anchor,Carb. Steel,3/4X5-1/2,Pk10 - RED HEAD WS-3454G Wedge Anchor,Carb. Steel,3/4x5-1/2,PK10. Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Galvanized, Anchor Dia. 3/4 in, Anchor Length 5 1/2 in, Max.
• Red Head Ws-3870 Wedge Anchor,Carb. Steel,3/8X7,Pk50 - RED HEAD WS-3870 Wedge Anchor,Carb. Steel,3/8x7,PK50. Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 7 in, Max. Work Thickness 5 1/8 in, Thread Length 3 7/8 in, Thread Size 3/8 In.-16, Min.
• Zoro Select U09150.025.0137 Sleeve Anchr,Hex,Sst,1/4In,1-3/8In,Pk100 - ZORO SELECT. Zoro Select U01210.050.0900 Grade 5, 1/2"-13 Hex Head Cap Screw, Zinc Plated. Sleeve Anchor, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 1/4 in, Anchor Length 1 3/8 in, Thread Size 10, Min.
• Zoro Select U09200.037.0600 Sleeve Anchor,Flat,Cst,3/8In,6In,Pk25 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 6 in, Thread Size 5/16, Min. ZORO SELECT. Zoro Select T25 Drum Thief,25Ml,43 In,Pk100.
• Zoro Select U09150.037.0300 Sleeve Anchor,Hex Nut,Sst,3/8In,3In,Pk25 - Sleeve Anchor, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 3 in, Thread Size 5/16, Min. ZORO SELECT. Zoro Select M51000.120.0130 A2, M12-1.75 Hex Head Cap Screw, Plain 18-8.
• MKT FASTENING M16105301 Wedge Anchor,Stl,M8,80mm,PK50 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 12 mm, Anchor Length 80 mm, Max. Work Thickness 0 mm, Thread Size M8 x 1.25mm, Min. Embedment 60 mm, Embedment In Concrete 60 mm, Package Quantity 50.
• Zoro Select U09100.031.0300 Sleeve Anchor,Hx Nut,Cst,5/16In,3In,Pk50 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 5/16 in, Anchor Length 3 in, Thread Size 1/4, Min. ZORO SELECT. Zoro Select Crp043266gr Hex Standoff,Alum,#6-32X2 L,Pk10.
• Zoro Select U70420.062.0500 Wedge Anchor,5/8",5",303/304,Pk2 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 5/8 in, Anchor Length 5 in, Max. Work Thickness 1 1/8 in, Thread Length 3 13/16 in, Thread Size 5/8 In.-11, Min.
• Zoro Select U09200.037.0400 Sleeve Anchor,Flat,Cst,3/8In,4In,Pk25 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 4 in, Thread Size 5/16, Min. ZORO SELECT. General Purpose. & Recepticles. Electrical Outlets.
• Zoro Select U70411.075.0700 Wedge Anchor,3/4",7",Zp Carbon Stl,Pk2 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/4 in, Anchor Length 7 in, Max. Work Thickness 2 in, Thread Length 4 1/2 in, Thread Size 3/4 In.-10, Min.
• Zoro Select U70411.075.0475 Wedge Anchor,3/4,4-3/4,Zp Carbn Stl,Pk2 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/4 in, Anchor Length 4 3/4 in, Max. Work Thickness 1 in, Thread Length 2 1/4 in, Thread Size 3/4 In.-10, Min.
• Mkt Fastening 1713000 Sleeve Anchor, 3/8 X 3In, Pk25 - Finish 1St 11054035 Sanding Sheet,9 X 5 1/2 In.,800 G,Pk25. Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 3 in, Thread Size 5/16-18, Max.
• Mkt Fastening 1710Ss0 Sleeve Anchor, 5/16 X 1-1/2In, Pk10 - Sleeve Anchor, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 5/16 in, Anchor Length 1 1/2 in, Thread Size 1/4-20, Max. Work Thickness 1/8 in, Min. MKT FASTENING. Eaton E50kl544 Limit Switch Arm,Roller,4.24 In Arm L.
• Mkt Fastening 2814314 Wedge Anchor,Galv. Steel, 1/4X3 1/4,Pk20 - MKT FASTENING 2814314 Wedge Anchor,Galv. Steel, 1/4x3 1/4,PK20. Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 3 1/4 in, Max.
• Mkt Fastening 2812334 Wedge Anchor,Galv. Steel, 1/2X3 3/4,Pk10 - MKT FASTENING 2812334 Wedge Anchor,Galv. Steel, 1/2x3 3/4,PK10. Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Galvanized, Anchor Dia. 1/2 in, Anchor Length 3 3/4 in, Max.
• Mkt Fastening 2612334 Wedge Anchor,Zinc Plated,1/2X3 3/4,Pk10 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 1/2 in, Anchor Length 3 3/4 in, Max. Work Thickness 1 1/2 in, Thread Length 2 1/2 in, Thread Size 1/2 In.-13, Min.
• Mkt Fastening 2612234 Wedge Anchor,Zinc Plated,1/2X2 3/4,Pk10 - Zoro Select 5Tpg6 Double Rod Pegboard Hook,2-13/16 In,Pk10. Zoro Select 5Tpd2 Single Rod Pegboard Hook,4 In,Pk10. Zoro Select 5Tpg4 Single Rod Pegboard Hook,6 In,Pk10. Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia.
• Mkt Fastening 2816000 Wedge Anchor,Galv. Steel, 1X6,Pk4 - MKT FASTENING 2816000 Wedge Anchor,Galv. Steel, 1x6,PK4. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 1 in, Anchor Length 6 in, Max. Work Thickness 1 1/2 in, Thread Length 3 1/2 in, Thread Size 1 In.-8, Min.
• Mkt Fastening 2738300 Wedge Anchor,303/304 Ss,3/8X3,Pk20 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 3 in, Max. Work Thickness 1 3/8 in, Thread Length 1 7/8 in, Thread Size 3/8 In.-16, Min.
• Mkt Fastening 271413S Wedge Anchor,316 Ss,1/4X1 3/4,Pk20 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 1/4 in, Anchor Length 1 3/4 in, Max. Work Thickness 5/8 in, Thread Length 7/8 in, Thread Size 1/4 In.-20, Min.
• Mkt Fastening 2838334 Wedge Anchor,Galv. Steel, 3/8X3 3/4,Pk20 - MKT FASTENING 2838334 Wedge Anchor,Galv. Steel, 3/8x3 3/4,PK20. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 3/8 in, Anchor Length 3 3/4 in, Max. Work Thickness 2 1/8 in, Thread Length 2 5/8 in, Thread Size 3/8 In.-16, Min.
• Mkt Fastening 2634512 Wedge Anchor,Zinc Plated,3/4X5 1/2,Pk5 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/4 in, Anchor Length 5 1/2 in, Max. Work Thickness 2 1/8 in, Thread Length 3 5/8 in, Thread Size 3/4 In.-10, Min.
• Simpson Strong-Tie Wedge-All 5/8" X 5" **Lot Of 16** - LOT OF 16 .
• Zoro Select U70411.037.0500 Wedge Anchor,3/8",5",Zp Carbon Stl,Pk10 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 5 in, Max. Work Thickness 2 3/8 in, Thread Length 3 1/2 in, Thread Size 3/8 In.-16, Min.
• Zoro Select U70420.037.0500 Wedge Anchor,3/8",5",303/304,Pk10 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 5 in, Max. Work Thickness 2 3/8 in, Thread Length 3 1/2 in, Thread Size 3/8 In.-16, Min.
• Zoro Select U70420.037.0225 Wedge Anchor,3/8",2-1/4",303/304,Pk25 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 2 1/4 in, Max. Work Thickness 3/16 in, Thread Length 3/4 in, Thread Size 3/8 In.-16, Min.
• Zoro Select U70420.037.0375 Wedge Anchor,3/8",3-3/4",303/304,Pk10 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 3 3/4 in, Max. Work Thickness 1 1/8 in, Thread Length 2 1/4 in, Thread Size 3/8 In.-16, Min.
• Mkt Fastening 2512512 Wedge Anchor,Gr 5,1/2 X5 1/2,Pk50 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 1/2 in, Anchor Length 5 1/2 in, Max. Work Thickness 2 3/4 in, Thread Length 4 in, Thread Size 1/2 In.-13, Min.
• Zoro Select U09150.050.0225 Sleeve Anchor,Hex,Sst,1/2In,2-1/4In,Pk10 - Sleeve Anchor, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 2 1/4 in, Thread Size 3/8, Min. ZORO SELECT. General Purpose. & Recepticles. Electrical Outlets.
• Zoro Select U70411.025.0325 Wedge Anchor,1/4,3-1/4,Zp Carbn Stl,Pk50 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 3 1/4 in, Max. Work Thickness 1 3/8 in, Thread Length 2 1/8 in, Thread Size 1/2 In.-13, Min.
• Zoro Select U70411.037.0275 Wedge Anchor,3/8,2-3/4,Zp Carbn Stl,Pk25 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 2 3/4 in, Max. Work Thickness 3/8 in, Thread Length 1 1/4 in, Thread Size 3/8 In.-16, Min.
• Zoro Select U70411.100.0600 Wedge Anchor,Zinc Plated,1In,6In - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1 in, Anchor Length 6 in, Max. Work Thickness 1 in, Thread Length 2 7/8 in, Thread Size 1 In.-8, Min.
• New SteelLinx 50 Sets 1/2" x 6" Hot Dipped Anchor Bolts w/ Nut & Round Washer - Product /Model/Cat. No: 1/2" x 6" Hot Dipped Galvanized Anchor Bolts w/ Nut & Round Washer. Box is not perfect due to storage. What you see is only what you will receive. Consumables may or may not have an expiration date including foods, toners, ink etc.
• NEW 10 Red Head Concrete Anchor Wedge 5/8" x 4.25" #WS-5842 - What you see is what you get. Unless stated differently.
• NEW 24 Red Head Sleeve Anchors 1/2" x 4" #11285 - What you see is what you get. Unless stated differently.
• 1/2 X 2-3/4 Steel Wedge Type Anchor Zinc Plated 50 Pack - WARREN FASTENINGS SOUTH. Looking for another size or quantity?.
• Dottie W12234, 1/2 x 2-3/4" Wedge Anchors - Box of 50 Anchors - Free Shipping - Dottie W12234. 1/2 x 2-3/4" Wedge Anchors. Box of 50 Anchors. DON'T MISS OUT ON THIS GREAT DEAL!
• 3/8 X 5 Steel Wedge Type Anchor Zinc Plated 50 Pack - WARREN FASTENINGS SOUTH. Looking for another size or quantity?.
• 3/8-16 X 2 1/4 Wedge Anchors, 304 Stainless Steel 100 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 3/8-16 X 3 Wedge Anchors, 304 Stainless Steel 100 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• WEJ-IT 3/8" Diam 3/8" Drill 6" OAL Wedge Concrete Anchor Zinc-Plated Steel - Wedge expansion concrete anchors are heavy-duty anchors used in cracked and uncracked concrete. They have expansion wedges that expand in concrete holes to increase holding power. Type Wedge Expansion.
• 5 Concrete Wedge Anchor Bolts 3/4 x 5-1/2 Includes Nuts & Washers - Condition is "New".
• RAWL LOK/BOLT ANCHORS WITH HEX NUT 3/4" X 4" box of 9 # 5055 NOS Masonry
• 1/2" x 4 1/4" Stainless Steel Wedge Anchors with Nuts & Washers (20pc LOT) NEW - 1/2" x 4 1/4" 18-8 / 304Stainless Steel Wedge Anchors. for solid concrete & solid masonry applications. includes Flat Washers & Hex Nuts. threaded portion approx.
• Case of 50 Wej-it WDS12 Ultra Drop Carbon Steel Drop-In Anchors - Case of 50 Wej-it WDS12 Ultra Drop Carbon Steel Drop-In Anchors. Shipped with USPS Retail Ground.
• Red Head Trubolt Wedge Anchors, Gws-5860, 5/8" X 6", W/ Hardware, Lot Of 10* - RED HEAD TRUBOLT WEDGE ANCHORS. YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE. MODEL: GWS-5860. BOX OF 10 .
• Red Head Trubolt Wedge Anchors, Gws-1244, 1/2" X 4-1/2", W/ Hardware, Lot Of 23* - RED HEAD TRUBOLT WEDGE ANCHORS. BOX OF 23 . YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE. MODEL: GWS-1244.
• Red Head Trubolt Wedge Anchors, Gws-1226, 1/2" X 2-3/4", W/ Hardware, Lot Of 17* - RED HEAD TRUBOLT WEDGE ANCHORS. BOX OF 17 . YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE. MODEL: GWS-1226.
• Red Head Trubolt Wedge Anchors, Gws-3822, 3/8" X 2-1/4", W/ Hardware, Lot Of 50* - RED HEAD TRUBOLT WEDGE ANCHORS. YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE. BOX OF 50 . MODEL: GWS-3822.
• Red Head Trubolt Wedge Anchors, Gws-1270, 1/2" X 7", W/ Hardware, Lot Of 13** - RED HEAD TRUBOLT WEDGE ANCHORS. BOX OF 13 . YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE. MODEL: GWS-1270.
• 3/8-16 X 2 3/4" Wedge Anchors, 304 Stainless Steel 100 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 3/4-10 X 7" Wedge Anchors, 304 Stainless Steel 10 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 5/8-11 X 10 Wedge Anchors, 304 Stainless Steel 10 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 1"-8 X 12" Wedge Anchors, 304 Stainless Steel 5 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 1/2-13 X 3 3/4 Wedge Anchors, 316 Stainless Steel 50 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 3/8"-16 X 5" Wedge Anchors, 304 Stainless Steel 50 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 3/8"-16 X 3" Wedge Anchors, 316 Stainless Steel 100 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 5/8"-11 X 3 1/2" Wedge Anchors, 304 Stainless Steel 25 Pieces - WEDGE ANCHORS. 304 STAINLESS STEEL. DISCOVER CARD.
• 1/2"-13 X 12" Wedge Anchors, 304 Stainless Steel 25 Pieces - WEDGE ANCHORS. 304 STAINLESS STEEL. 1/2"-13 X 12". DISCOVER CARD.
• 5/8"-11 X 4 1/2" Wedge Anchors, 304 Stainless Steel 25 Pieces - WEDGE ANCHORS. 304 STAINLESS STEEL. DISCOVER CARD.
• 1-8 X 12 Wedge Anchors, 304 Stainless Steel 5 Pieces - The Ultrawedge Anchor is used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 3/4-10 X 8 1/2 Wedge Anchors Hot Dipped Galvanized 10 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 3Lag Hardware Bag Bolt Washer w/ Ribbed Concrete Anchors, Pack of 3 Screws - 3Lag Hardware Bag set. 3 Concrete Anchors, 3 lag bolts. 5/16x2 3/4", 3 Bolt Washers. Condition is New, Never Opened.
• 3/4-10 X 12 Wedge Anchors, 304 Stainless Steel 10 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 5/8-11 X 10 Wedge Anchors Hot Dipped Galvanized 10 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 1/2-13 X 5 1/2 Wedge Anchors Hot Dipped Galvanized 25 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 3/4-10 X 4 3/4 Wedge Anchors, 316 Stainless Steel 20 - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 3/4-10 X 6 1/4" Wedge Anchors, 316 Stainless Steel 10 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 1/2-13 X 5 1/2 Wedge Anchors, 304 Stainless Steel 25 Pieces - WEDGE ANCHORS. 304 STAINLESS STEEL. DISCOVER CARD.
• 3/4-10 X 6 1/4" Wedge Anchors Hot Dipped Galvanized 10 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 5/8-11 X 4 1/2 Wedge Anchors, 316 Stainless Steel 25 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 1-8 X 6 Wedge Anchors, 304 Stainless Steel 5 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 1-8 X 9 Wedge Anchors Hot Dipped Galvanized 5 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 3/4-10 X 4 1/4 Wedge Anchors, 304 Stainless Steel 20 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 3/4"-10 X 4 1/4" Wedge Anchors, 316 Stainless Steel 20 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• RED HEAD #11271 HEAVY DUTY WEDGE ANCHORS 3-3/4"x1/2" W/ HARDWARE (LOT OF 25)
• Single Expansion Anchor 1/2” Bolt 7/8” Hole x 2” (BAG OF 10)
• *QTY 10 MKT Conical Stud VMZ-A 60 M10-10/85 Epoxy Anchor Bolt Kit REF 32205101 - REF 32205101. Conical Stud. Epoxy Anchor Bolt Kit. VMZ-A 60 M10-10/85. B-6 SHELF 1.
• 85 piece Concrete Anchor Variety Lot - 85 piece variety or concrete anchors. Hilit, redhead and other name brands. All are new and sizes and quantities are shown in photos.
• Red head wedge anchor 5/8 by 6 inches long qty 2 new
• POWER-STUD 3/8" x 3" CARBON STEEL CONCRETE WEDGE ANCHOR 07413 (LOT OF 23)
• NEW! Lot of 2 Red Head 10-Pack 5-1/2-in x 1/2-in Wedges Anchors - Model # 12021. anchors for treated lumber applications. Steel construction with a1-piece stainless steel clip. Hot-dipped galvanized finish resists corrosion. Threaded design accommodates fixtures of various thickness.
• LEAD concrete ANCHORS fasteners RAWL 3/4"x10 BOLT (4 pc. lots) $10 USA Shipping
• LEAD concrete ANCHORS fasteners RAWL 5/8"x11 BOLT (4 pc. lots) $10 USA Shipping
• Vintage Red Head Concrete Sleeve Anchors - Box of 30
• Concrete Wedge Anchor Bolts 1/2" x 3 1/2" and 5" Lot of 9 new - There are six 3 1/2" long and three 5" long.
• Lot of 25 DeWALT POWER STUD SD1 5/8in x 8 1/2in Concrete 7438SD1 - Lot of 25 DeWALT POWER STUD SD1 5/8in x 8 1/2in Concrete 7438SD1 are new in the original box.
• Box of 100 1/4 Short Hillman Medium Duty Lag Screw Shields Anchors 370204 - New in box.
• Box of 100 5/16 Short Hillman Medium Duty Lag Screw Shields Anchors 370207 - 1-1/4" long. New in box. There are actually only 99 pieces in the box (I counted them).
• 2 Box DeWALT Wedge Expansion Anchors Power-Stud+ SD1 Fasteners 7402SD1 (200) NEW - MPN: 7402SD1. Power-Stud+ SD1. Lot of 2 Boxes of DeWALT Wedge Expansion Anchors - NEW. For your consideration is this lot of two NEW boxes of DeWALT wedge expansion anchors. The boxes have shelf wear.
• 37 Pieces Stud /Wedge Anchors 3/8 x 3.75"
• COBRA 502TS10 1/2 in. x 4-1/4 in. Wedge Anchor - pack of 10 - COBRA 502TS10 1/2 in. Includes: COBRA 502TS10 1/2 in. for units that require them (unless they are on the tool already). Like New :"Unused" Tool has never been used, may or may not have paper work or box.
• Zoro Select B09100.037.0250 Sleeve Anchor,Hex Nut,3/8" Dia.,Pk250 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 3/8 in, Anchor Length 2 1/2 in, Thread Size 5/16, Min. ZORO SELECT. Zoro Select N04160.050.0750 Grade 8, 1/2"-20 Hex Head Cap Screw, Black Oxide.
• Box of 25 US ANCHOR Expansion Lag Shield Anchors 1/2" x 3" - A box of 25 US ANCHOR expansion lag shield anchors for 1/2" bolt and 3/4" drill hole. New in box.
• Wej-It Wedge Anchors #1260 Carbon Steel (Qty of 10)
• SIX Concrete Wedge Anchors - 5/8" diameter - Stainless Steel - 5" Total Length - Condition is "New". One Nut and Washer also included with each Wedge Anchor. (note: only four of the six anchors are pictured, but you will receive six of each; anchor, washer, and bolt.).
• (10) NEW Concrete Wedge Anchor Bolts 5/8 x 5 Includes Nuts & Washers,, - 10 - New zinc coated concrete wedge anchor bolts. 5/8" x 5" and includes nut and washer.
• 14 Simpson Strong Tie THD75400H 3/4"x4" Concrete Anchor Bolts Titen HD
• Red Head Trubolt Wedge Anchors, Gws-1242, 1/2"X4-1/4", W/ Hardware, *Box Of 24* - RED HEAD TRUBOLT. WEDGE ANCHORS. BOX OF 24 . YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE.
• New Box of 25 Powers Fasteners 1/2" x 3" Carbon Steel Sleeve Expansion Anchors - 1/2" x 3" Carbon Steel Sleeve Expansion Anchors. New Box of 25 Powers Fasteners 05030S.
• 3/8" x 1-7/8" Concrete Sleeve Anchors Hex Head Nut & Washer 100 Pcs NEW - Style: Hex Head Nut & Washer Sleeve Anchor. NOTE: You are purchasing 100 Pcs. Type: Heavy Duty Sleeve. Material: Steel, Zinc Plated.
• 3/8 x 3" Hex Head Steel Sleeve Anchors 50 Pcs NEW Made in Canada - 3/8 x 3" Hex Head Steel Sleeve Anchors ( 50 Pcs. ). Material: Steel, Zinc Plated. Box Quantity: 50 Pcs. NOTE: You are purchasing a box of 50 Pcs. Style Anchor: Steel Sleeve Anchor. Our Ref: 21A, Rear Pallet Racking, 06-01-21.
• 1/4" x 1-1/4" Masonry Hammer Drive Pin Anchors Zinc Plated 125 Pcs Mushroom Hd - Masonry Concrete Applications. Applications: Concrete, Masonry. Style: Drive Pin Anchors. Our Ref: 21A, Rear Pallet Racking, 06-01-21. Box Quantity: 125 Pcs. NOTE: You are purchasing a box of 125 pcs.
• 1/2-13 x 3-3/4" Concrete Wedge Anchors Zinc Plated Masonry Anchors 25 Pcs - Concrete Wedge Anchors Zinc Plated Masonry Anchors 1/2-13 x 3-3/4" Qty: 25 pcs. 1/2”-13 x 3-3/4” Concrete Masonry Wedge Anchors New ( 25 Pcs. ). Style: Wedge Anchor. Material: Steel, Zinc Plated. All prices are in U.S. funds.
• 5/8" x 7" Steel Wedge Anchors Concrete Masonry New 25 Pcs - Style: Wedge Anchor. Make: US Anchor Corp. Per Box: 25 Pcs. You are purchasing 25 Pcs. With Nuts & Washers. Material: Steel, Zinc Plated. Buffalo, New York.
• 5/8" x 4-1/4" Masonry Steel Sleeve Anchors 25 Pcs - Type: Masonry Sleeve Anchor. Material: Steel, Zinc Plated.
• 5/8" x 3" Masonry Sleeve Anchors Steel Zinc Plated 25 Pcs NEW - Style: Sleeve Anchors. Make: US Anchors. Material: Steel Zinc Plated. Box Quantity: 25 Pcs. Size: 5/8" x 3". Condition: New.
• 3/8" x 4" Masonry Sleeve Anchors Steel Zinc Plated 25 Pcs New - Box Quantity: 25 Pcs. NOTE: You are purchasing a box of 25 Pcs. Style: Sleeve Anchor. Size: 3/8" x 4". Condition: New.
• 1/4 x 1" Masonry Drive Pin Anchors 100 pcs Made in Canada New - 1/4 x 1" Masonry Drive Pin Anchors 100 pcs. Made in Canada New. Make: US Anchor Corp. Material: Zinc. Box quantity: 100 Pcs. NOTE: You are purchasing a box of 100 pcs. Drill Hole Size: 1/4". Style Head: Mushroom Head.
• Cobra Parawedge Concrete Anchor w/ Nuts & Washers 3/8" x 3" 496N(PACK OF 2)(13B1
• 1" X 12" Wedge Anchor Steel Zinc Plated
• M6 to M20 Sleeve Anchors Expanding Bolts Concrete Through Bolts A2 304 Stainless - M6, M8,M10, M12, M14, M16, M18, M20. Wall Floor Anchors Expanding Bolts Sleeve Anchor Through Bolts Wedge Anchors for Masonry Concrete Brick. ● Thread Size:M6,M8,M10 ,M12,M14 ,M16 ,M18 ,M20. 304 A2 Stainless Steel, Length 50mm - 150mm.
• Concrete Hex Head Sleeve Anchors Expanding Bolts M6 M8 M10 M12 A2 304 Stainless - M6, M8,M10, M12. ● Thread Size:M6,M8,M10 ,M12. The maximum tensile strength of M8 series : 1100-1200 kgs. The maximum tensile strength of M12 series : 2300-2500 kgs. The maximum tensile strength of M10 series : 1500-1700 kgs.
• Wedge Type Stud Bolt Anchor Steel 3/8 x 3-3/4" (Pack of 25) SP101150 - Work confidently knowing you can rely on Heads and Threads for the premium fasteners, hardware, screws, nuts and bolts, as well as other MRO related products your organization needs to keep it up and running.
• 3 Boxes(100) Long 5/16" Drill-n-Anchors 5/16 x 1-3/4 Concrete Anchors 1/2" Drill - Condition is "New".
• Wej-It Anchor Bolts 1/4" x 1 1/4" - Wej-It B1411 Anchor Bolts 1/4" x 1 1/4".
• (Lot of 9) Letter J Concrete Wedge Anchor Expansion Bolt - Never used, but some have light surface rust as shown in photos. Letter J give indication to length. The total length is 6"
• Mkt Fastening 2578800 Wedge Anchor,Gr 5,7/8 X 8 In,Pk10 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 7/8 in, Anchor Length 8 in, Max. Work Thickness 3 1/8 in, Thread Length 2 1/4 in, Thread Size 7/8 In.-9, Min.
• Hilti HDI+ / HDI FLUSH ANCHOR Drop-in anchor 1/2" # 2080046 Box of 300 *NIB* - HDI+ / HDI FLUSH ANCHOR Drop-in anchor HDI+ 1/2" #2080046 Box of 300 NIB . Hilti HDI+ 1/2” Drop In Anchors Box of 300 NIB . has a way to unload the pallet/item or if we need to arrange for a lift. (DOA, not working properly etc…).
• Hilti 2080046 HDI+/ HDI FLUSH ANCHOR Drop-in anchor HDI+ 1/2" 50/Box - Hilti HDI+ / HDI FLUSH ANCHOR Drop-in anchor HDI+ 1/2" #2080046 50/Box. Hilti HDI+ 1/2” Drop In Anchors Box of 50 NIB . has a way to unload the pallet/item or if we need to arrange for a lift. (DOA, not working properly etc…).
• New 100 Pcs Tapcon Concrete Anchors Bricks 3210x Slotted Hex Head 1/4" x 1-1/4"
• Confast Fasteners WA19 Wedge Anchor Concrete Fastening Systems - Qty 5 - CONFAST 1" x 9" Wedge Anchor Zinc Plated (Box of 5). Carbon Steel Zinc Plated.
• New 15 Pcs Tapcon Concrete Anchors Bricks 5/16" x 3"
• Zoro Select U09100.037.0300 Sleeve Anchor,Hex Nut,Cst,3/8In,3In,Pk25 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 3 in, Thread Size 5/16, Min. ZORO SELECT. Zoro Select L07400.080.0016 M8-1.25 Socket Head Cap Screw, Black Oxide Steel.
• Zoro Select U09100.031.0150 Sleeve Anchr,Hex,Cst,5/16In,1-1/2In,Pk50 - ZORO SELECT. Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 5/16 in, Anchor Length 1 1/2 in, Thread Size 1/4, Min. General Purpose. & Recepticles. Electrical Outlets.
• Zoro Select U09100.037.0400 Sleeve Anchor,Hex Nut,Cst,3/8In,4In,Pk25 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 4 in, Thread Size 5/16, Min. ZORO SELECT. Zoro Select Cq3005l Open Head Transport Drum, Steel, 30 Gal, Lined, Black.
• Zoro Select U09100.031.0250 Sleeve Anchr,Hex,Cst,5/16In,2-1/2In,Pk50 - ZORO SELECT. Zoro Select U30105.016.0250 Wood Screw, #8 X 2-1/2 In, Zinc Yellow Steel Flat. Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 5/16 in, Anchor Length 2 1/2 in, Thread Size 1/4, Min.
• Mkt Fastening 2514134 Wedge Anchor,Gr 5,1/4X1 3/4,Pk100 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 1 3/4 in, Max. Work Thickness 3/8 in, Thread Length 7/8 in, Thread Size 1/4 In.-20, Min.
• COBRA Parawedge 498TS50 3/8 in. x 3-3/4 in. Wedge, 50x - COBRA Parawedge 498TS50 3/8 in. x 3-3/4 in. Wedge, 50x. Condition is "New". Shipped with USPS Parcel Select Ground. Box damage as shown
• Hilti Sleeve Anchor 3/8" X 6" HLC-FPH 3/8X6 25 ea. # 336251 New
• Mkt Fastening 2558412 Wedge Anchor,Gr 5,5/8 X4 1/2,Pk25 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 4 1/2 in, Max. Work Thickness 1 1/8 in, Thread Length 2 5/8 in, Thread Size 5/8 In.-11, Min.
• Mkt Fastening 2534414 Wedge Anchor,Gr 5,3/4 X4 1/4,Pk25 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/4 in, Anchor Length 4 1/4 in, Max. Work Thickness 1/8 in, Thread Length 2 3/8 in, Thread Size 3/4 In.-10, Min.
• Grip Rite 3/8" X 1 7/8" Sleeve Anchors. Box Of 50.
• 3/8”x5” Flat Head Phillips Sleeve Anchor Zinc Plate Strong Tie Lock Bolt 10 Pack - These bolts are used for concrete, masonry, brick, block, mounting back plates, fixtures, structural connections, door jambs, windows, etc.
• DeWalt 7423SD2 1/2" x 4-1/2" Power-Stud+ Wedge Anchor 50Pk - Model POWR 7423SD2. Type Carbon Steel Wedge Expansion Anchor Stainless Steel Clip, 50 Per Box.
• Zoro Select U70420.075.0425 Wedge Anchor,3/4",4-1/4",303/304,Pk2 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 4 1/4 in, Max. Work Thickness 9/16 in, Thread Length 1 3/4 in, Thread Size 3/4 In.-10, Min.
• Zoro Select U70420.050.0550 Wedge Anchor,1/2",5-1/2",303/304,Pk5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 5 1/2 in, Max. Work Thickness 2 in, Thread Length 3 3/4 in, Thread Size 1/2 In.-13, Min.
• Hilti Anchor plate CFS-T AP 120 S/S 5 Pack
• Zoro Select U09200.037.0287 Sleeve Anchor,Flt,Cst,3/8In,2-7/8In,Pk25 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 2 7/8 in, Thread Size 5/16, Min. ZORO SELECT. General Purpose. & Recepticles. Electrical Outlets.
• 150x Powers Wedge-bolt Anchors 1/2"X4"07246 - 155x Powers Wedge-bolt Anchors 1/2"X4"07246. Condition is "New". Shipped with USPS Priority Mail. Repacked in flat rate box 003
• 155x Powers Wedge-bolt Anchors 1/2"X4"07246 - 155x Powers Wedge-bolt Anchors 1/2"X4"07246. Condition is "New". Shipped with USPS Priority Mail. Repacked in flat rate box 002
• Wej-it AT1060 1" X 6" Ankr-TITE Wedge Anchor (Zinc Plated)
• 3" .145 Dia Powder-Actuated Fasteners Pin Drive 100/BX - No. DP300 - Features:From its first years of operation, Simpson Strong-Tie has led the industry in structural connector designAll Simpson Strong-Tie products meet or exceed any applicable standards
• Wej-it AT11490 1-1/14" X 9" Ankr-TITE Wedge Anchor (Zinc Plated) - New - opened boxes of unused 1-1/4" by 9" Wedge anchors. 4 wedge anchors per box.
• Wej-it ATG11490 galvanized 1-1/4" X 9" Ankr-TITE Wedge Anchor - New - opened boxes of unused 1-1/4" by 9" Wedge anchors. 4 wedge anchors per box.
• HILTI KCM-MD Long Plate 5/8" + 3/4" Kwik Cast [Box of 15] - HILTI KCM-MD Long Plate 5/8" + 3/4" Kwik Cast. Location B8 Top.
• Hilti 7/8”x10” hot dipped galvanized anchor rods for Hilti Injectable systems, 7 - Hilti 7/8”x10” hot dipped galvanized anchor rods for Hilti Injectable systems, 7. Shipped with USPS Priority Mail.
• Concrete wedge anchors, 50 -1/4”x3-1/4”, 3/4” Thread With Nuts And Washers - Concrere wedge anchors, 50 -1/4”x3-1/4”, 3/4” Thread With Nuts And Washers. Condition is "New". Shipped with USPS Priority Mail.
• Red Head Trubolt 1/2"x 4-1/2" Steel Concrete Fasteners WS-1244 Box Of 25 - Red Head Trubolt 1/2"x 4-1/2" Steel Concrete Fasteners WS-1244 Box Of 25. Condition is "New". Shipped with USPS Priority Mail.
• ITW/REDHEAD® 7/8" x 10" Trubolt Wedge Anchors, WS-78100, Made in USA, 5/Box - ITW/REDHEAD® 7/8" x 10" Red Head Trubolt Wedge Anchor, WS-78100, 5/Box. ITW Red Head Trubolt Wedge Anchor. Wedge anchors feature stainless steel split expansion ring and a threaded stud bolt body and integral cone expander, nut and washer.
• Hilti 12mm Concrete Stud Anchor Floor Kit, Zone 4 Earthquake UF EQ Rack - Very heavy duty steel braces.
• 3/4"-10 x 10" Coarse Thread Ultrawedge Wedge Anchor Hot Dip Galvanized - Fastener Type: Ultrawedge Wedge Anchor. Finish: Hot Dip Galvanized. Thread Pitch Type: Coarse. Anchors are used for anchoring and securing objects into drywall, concrete or brick. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 1/2"-13 x 4 1/4" Coarse Thread Wedge Anchor Low Carbon Steel Zinc Plated - Thread Pitch Type: Coarse. Fastener Type: Wedge Anchor. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 1/2"-13 x 3 3/4" Coarse Thread Wedge Anchor Low Carbon Steel Zinc Plated - Thread Pitch Type: Coarse. Fastener Type: Wedge Anchor. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 3/8"-16 x 6 1/2" Coarse Thread Wedge Anchor Zinc Plated - Thread Pitch Type: Coarse. Fastener Type: Wedge Anchor. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 1/2"-13 x 2 3/4" Coarse Thread Wedge Anchor Low Carbon Steel Zinc Plated - Thread Pitch Type: Coarse. Fastener Type: Wedge Anchor. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 3/8" x 6" Sleeve Anchor Phillips Flat Head Low Carbon Steel Zinc Plated - Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Material: Low Carbon Steel.
• 1/4" x 4" Sleeve Anchor Phillips Flat Head Low Carbon Steel Zinc Plated - Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Material: Low Carbon Steel.
• 1/2"-13 x 8 1/2" Coarse Thread Ultrawedge Wedge Anchor Zinc Plated - Fastener Type: Ultrawedge Wedge Anchor. Thread Pitch Type: Coarse. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 5/8"-11 x 5" Coarse Thread Ultrawedge Wedge Anchor Hot Dip Galvanized - Fastener Type: Ultrawedge Wedge Anchor. Finish: Hot Dip Galvanized. Thread Pitch Type: Coarse. Anchors are used for anchoring and securing objects into drywall, concrete or brick. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 1/2"-13 x 4 1/2" Coarse Thread Wedge Anchor Low Carbon Steel Zinc Plated - Thread Pitch Type: Coarse. Fastener Type: Wedge Anchor. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 3/8"-16 x 3 1/2" Coarse Ultrawedge Wedge Anchor Hot Dip Galvanized - Fastener Type: Ultrawedge Wedge Anchor. Finish: Hot Dip Galvanized. Thread Pitch Type: Coarse. Anchors are used for anchoring and securing objects into drywall, concrete or brick. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 1/2"-13 x 12" Coarse Thread Wedge Anchor Low Carbon Steel Zinc Plated - Thread Pitch Type: Coarse. Fastener Type: Wedge Anchor. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 1/2"-13 x 3 3/4" Coarse Thread Ultrawedge Wedge Anchor Zinc Plated - Fastener Type: Ultrawedge Wedge Anchor. Thread Pitch Type: Coarse. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 3/8"-16 x 3" Coarse Thread Ultrawedge Wedge Anchor Zinc Plated - Fastener Type: Ultrawedge Wedge Anchor. Thread Pitch Type: Coarse. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 1/2"-13 x 8 1/2" Coarse Thread Wedge Anchor Zinc Plated - Thread Pitch Type: Coarse. Fastener Type: Wedge Anchor. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 5/8-11 x 8 1/2 Coarse Wedge Anchor Medium Carbon Steel - Thread Pitch Type: Coarse. Fastener Type: Wedge Anchor. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Average Piece Weight: 0.8384000 lbs. Thread Pitch: 11. Don't see what you need?.
• 5/8"-11 x 6" Coarse Thread Wedge Anchor Low Carbon Steel Zinc Plated - Thread Pitch Type: Coarse. Fastener Type: Wedge Anchor. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 5/8"-11 x 5" Coarse Thread Ultrawedge Wedge Anchor Zinc Plated - Fastener Type: Ultrawedge Wedge Anchor. Thread Pitch Type: Coarse. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 5/8"-11 x 4 1/2" Coarse Thread Wedge Anchor Low Carbon Steel Zinc Plated - Thread Pitch Type: Coarse. Fastener Type: Wedge Anchor. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 5/8"-11 x 12" Coarse Thread Wedge Anchor Low Carbon Steel Zinc Plated - Thread Pitch Type: Coarse. Fastener Type: Wedge Anchor. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 5/8" x 3" Sleeve Anchor Hex Nut Low Carbon Steel Zinc Plated - Fastener Type: Sleeve Anchor Hex Nut. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Drive Type: External Hex. Finish: Zinc Plated. Material: Low Carbon Steel. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 5/8" x 2 1/4" Sleeve Anchor Hex Nut Low Carbon Steel Zinc Plated - Fastener Type: Sleeve Anchor Hex Nut. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Drive Type: External Hex. Finish: Zinc Plated. Material: Low Carbon Steel. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 3/8"-16 x 3 3/4" Coarse Thread Ultrawedge Wedge Anchor Zinc Plated - Fastener Type: Ultrawedge Wedge Anchor. Thread Pitch Type: Coarse. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 3/8" x 3" Sleeve Anchor Hex Nut Low Carbon Steel Zinc Plated - Fastener Type: Sleeve Anchor Hex Nut. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Drive Type: External Hex. Finish: Zinc Plated. Material: Low Carbon Steel. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 3/4" x 5 1/2" Sleeve Anchor Hex Nut Low Carbon Steel Zinc Plated - Fastener Type: Sleeve Anchor Hex Nut. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Drive Type: External Hex. Finish: Zinc Plated. Material: Low Carbon Steel. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 3/4" x 4 1/4" Sleeve Anchor Hex Nut Low Carbon Steel Zinc Plated - Fastener Type: Sleeve Anchor Hex Nut. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Drive Type: External Hex. Finish: Zinc Plated. Material: Low Carbon Steel. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 1/4"-20 x 3 1/4" Coarse Thread Wedge Anchor Low Carbon Steel Zinc Plated - Thread Pitch Type: Coarse. Fastener Type: Wedge Anchor. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 1/2"-13 x 4 3/4" Coarse Thread Expansion Pin Strike Anchor Stl Yellow Zinc - Thread Pitch Type: Coarse. Fastener Type: Expansion Pin Strike Anchor. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Thread Pitch: 13. Anchors are used for anchoring and securing objects into drywall, concrete or brick.
• 1/2"-13 x 3 1/2" Coarse Thread Expansion Pin Strike Anchor Stl Yellow Zinc - Thread Pitch Type: Coarse. Fastener Type: Expansion Pin Strike Anchor. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Thread Pitch: 13. Anchors are used for anchoring and securing objects into drywall, concrete or brick.
• 1"-8 x 9" Coarse Thread Wedge Anchor Low Carbon Steel Zinc Plated - Thread Pitch Type: Coarse. Fastener Type: Wedge Anchor. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• LOT of New Hilti Masonry Concrete Anchors Est. Value $1200+ BEST OFFER - ♦ One box of Hilti HDI-L 1/2" Drop In Concrete Anchors. ♦ Three 25 count boxes of Hilti Kwik Bolt 11 1/2" x 7" Wedge Anchors. ♦ One box of Hilti HDI-L 3/8"" Drop In Concrete Anchors. ► INCLUDED IN THIS LOT; CONSIDER QUANTITIES AND INFORMATION BELOW AS APPROXIMATE.
• Hilti 457531 3/8" Drop-In Threaded Concrete Anchors - New in seal box.
• Hillman 41307 Medium Duty Metal Long Hollow Wall Anchor 1-1/4 in. (Pack of 5) - Hillman 1/4 in. Use to securely fasten mirrors, pictures, cabinets, and more to hollow walls. This anchor is an expandable sleeve that slides into pre-drilled hole in the wall. Product Type: Hollow Wall Anchors.
• Fastenal, Wedge Anchor 1" X 2-5/8", 9" Long - Approximate weight: 1 lbs. Approximate weight: 2 lbs. AE/#4160/SC9 D-3/(2)TI. DNP/#90/SKID#223 / (6)JS FASTENAL. WEDGE ANCHOR.
• FASTENAL, WEDGE ANCHOR, PART NO 11562843 , 3/4" x 7" - Approximate weight: 1 lbs. Approximate weight: 1.2 lbs. AE/4159/SC9 D-3/(5)TI. PART NO. 11562843. DNP/#90/SKID#223 / (6)JS FASTENAL. WEDGE ANCHOR. ZINC PLATED CARBON STEEL.
• Cobra Parawedge Concrete Anchor w/ Nuts & Washers 3/8" x 3" 496NS - Cobra Parawedge Concrete Anchor w/ Nuts & Washers 3/8" x 3" 496NS. Condition is "New".
• 9 new Hilti 1/2 x 7 Expansion Anchor galvanized
• Red Head 50115 Sleeve Anchor LOT OF 4 - If you are not able to pick up locally, we are able to get competitive freight quotes as well.
• 12 Ct HILLMAN POWERS FASTENERS POWER-STUD WEDGE ANCHOR 1/2" x 3-3/4” 376118 - 12ct HILLMAN POWERS FASTENERS POWER-STUD WEDGE ANCHOR 1/2” x 3-3/4” Item is brand new never used sealed in original packaging.What you see is what you get. Items are shipped promptly with care after payment. Thanks!Stock H120 Rack h
• 8ct HILLMAN POWERS FASTENERS POWER-STUD WEDGE ANCHOR 1/2" x 5-1/2" 376120 - 10ct HILLMAN POWERS FASTENERS POWER-STUD WEDGE ANCHOR 1/2" x 5-1/2” 376120. Item is brand new never used sealed in original packaging.What you see is what you get. Items are shipped promptly with care after payment. Thanks!Stock H119Rack h
• 10ct HILLMAN POWERS FASTENERS POWER-STUD WEDGE ANCHOR 1/2" x 4-1/2" 376119 - 10ct HILLMAN POWERS FASTENERS POWER-STUD WEDGE ANCHOR 1/2" x 4-1/2" 376119. Item is brand new never used sealed in original packaging.What you see is what you get. Items are shipped promptly with care after payment. Thanks!Stock H118Rack h
• Qty = 63: Concrete Wedge Anchor 5/8" x 6" (no nuts or washers) - See photos. In the event that any clauses or phrases contained here within are ruled out by a judge, the law, a lawyer, jurors, and or any other entity all others remain in effect.
• Qty = 6: Wedge Anchor 3/4" x 7" - See photos. In the event that any clauses or phrases contained here within are ruled out by a judge, the law, a lawyer, jurors, and or any other entity all others remain in effect.
• MKT FASTENING M14315301 Wedge Anchor Bolt,M12,127mm,PK3 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 18 mm, Anchor Length 127 mm, Max. Work Thickness 20 mm, Thread Size M12, Min. Embedment 95 mm, Package Quantity 3.
• MKT FASTENING 273470S Wedge Anchor,316 SS,3/4x7,PK5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 7 in, Max. Work Thickness 1/4 in, Thread Length 2 in, Thread Size 3/4 In.-10, Min. Embedment 3 3/8 in, Embedment In Concrete 6 3/4 in, Ultimate Pullout (Lb.) 16,201 lb, Ultimate Shear (Lb.) 15,126 lb, Ultimate Shear in 3000 PSI Concrete (Lb.) 15,126 lb, Ultimate Shear in 4000 PSI Concrete (Lb.) 15,126 lb, Ultimate Tension (Lbs.) 16,201 lb.
• ZORO SELECT B70420.100.0900 Wedge Anchor,SS,303 and 304,Plain,PK11 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 1 in, Anchor Length 9 in, Max. Work Thickness 4 in, Thread Length 3 7/8 in, Thread Size 1 In.-8, Min. Embedment 4 1/2 in, Embedment In Concrete 4 1/2 in, Package Quantity 11.
• Simpson Strong Titen HD Heavy Duty Anchors 1/2" x 6" Quantity 10 Concrete Anchor - Galvanized Concrete Anchors.
• MKT FASTENING M16225301 Wedge Anchor,Stl,M10,141mm,PK25 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 15 mm, Anchor Length 141 mm, Max. Work Thickness 45 mm, Thread Size M10 x 1.50mm, Min. Embedment 71 mm, Embedment In Concrete 71 mm, Package Quantity 25.
• ZORO SELECT B70420.037.0275 Wedge Anchor,SS,303 and 304,Plain,PK250 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 2 3/4 in, Max. Work Thickness 3/8 in, Thread Length 1 1/4 in, Thread Size 3/8 In.-16, Min. Embedment 1 1/2 in, Embedment In Concrete 1 1/2 in, Package Quantity 250.
• ZORO SELECT B70420.075.0850 Wedge Anchor,SS,303 and 304,Plain,PK22 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 8 1/2 in, Max. Work Thickness 3 1/8 in, Thread Length 6 in, Thread Size 3/4 In.-10, Min. Embedment 3 1/4 in, Embedment In Concrete 3 1/4 in, Package Quantity 22.
• Simpson Strong Bolt 2 Wedge Anchors 3/8" x 3 3/4" Quantity 70 Concrete Anchors
• MKT FASTENING M16340301 Wedge Anchor Stud,M12,212mm,PK2 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 18 mm, Anchor Length 212 mm, Max. Work Thickness 100 mm, Thread Size M12, Min. Embedment 95 mm, Package Quantity 2.
• MKT FASTENING 277880S Wedge Anchor,316 SS,7/8x8,PK4 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 7/8 in, Anchor Length 8 in, Max. Work Thickness 4 in, Thread Length 2 1/4 in, Thread Size 7/8 In.-9, Min. Embedment 4 in, Embedment In Concrete 4 in, Ultimate Pullout (Lb.) 13,902 lb, Ultimate Shear (Lb.) 21,574 lb, Ultimate Shear in 3000 PSI Concrete (Lb.) 21,574 lb, Ultimate Shear in 4000 PSI Concrete (Lb.) 21,574 lb, Ultimate Tension (Lbs.) 13,902 lb.
• MKT FASTENING 271900S Wedge Anchor,316 SS,1x9,PK4 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 1 in, Anchor Length 9 in, Max. Work Thickness 4 1/2 in, Thread Length 2 1/4 in, Thread Size 1 In.-8, Min. Embedment 4 1/2 in, Embedment In Concrete 4 1/2 in, Ultimate Pullout (Lb.) 15,829 lb, Ultimate Shear (Lb.) 28,023 lb, Ultimate Shear in 3000 PSI Concrete (Lb.) 28,023 lb, Ultimate Shear in 4000 PSI Concrete (Lb.) 28,023 lb, Ultimate Tension (Lbs.) 15,829 lb.
• ZORO SELECT B70420.025.0325 Wedge Anchor,SS,303 and 304,Plain,PK500 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 1/4 in, Anchor Length 3 1/4 in, Max. Work Thickness 1 3/8 in, Thread Length 2 1/8 in, Thread Size 1/4 In.-20, Min. Embedment 1 1/8 in, Embedment In Concrete 1 1/8 in, Package Quantity 500.
• MKT FASTENING 2778100 Wedge Anchor,303/304 SS,7/8x10,PK4 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 7/8 in, Anchor Length 10 in, Max. Work Thickness 2 in, Thread Length 2 1/4 in, Thread Size 7/8 In.-9, Min. Embedment 4 in, Embedment In Concrete 8 in, Ultimate Pullout (Lb.) 20,288 lb, Ultimate Shear (Lb.) 21,574 lb, Ultimate Shear in 3000 PSI Concrete (Lb.) 21,574 lb, Ultimate Shear in 4000 PSI Concrete (Lb.) 21,574 lb, Ultimate Tension (Lbs.) 20,288 lb.
• ZORO SELECT B70420.050.0700 Wedge Anchor,SS,303 and 304,Plain,PK60 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 7 in, Max. Work Thickness 3 1/8 in, Thread Length 5 1/4 in, Thread Size 1/2 In.-13, Min. Embedment 2 1/4 in, Embedment In Concrete 2 1/4 in, Package Quantity 60.
• MKT FASTENING M16005301 Wedge Anchor,Stl,M6,67mm,PK100 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 10 mm, Anchor Length 67 mm, Max. Work Thickness 0 mm, Thread Size M6 x 1mm, Min. Embedment 50 mm, Embedment In Concrete 50 mm, Package Quantity 100.
• MKT FASTENING 2712700B Wedge Anchor,303/304 SS,1/2x7,PK150 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 7 in, Max. Work Thickness 2 1/2 in, Thread Length 1 1/4 in, Thread Size 1/2 In.-13, Min. Embedment 2 1/4 in, Embedment In Concrete 4 1/2 in, Ultimate Pullout (Lb.) 5,772 lb, Ultimate Shear (Lb.) 6,828 lb, Ultimate Shear in 3000 PSI Concrete (Lb.) 6,828 lb, Ultimate Shear in 4000 PSI Concrete (Lb.) 6,828 lb, Ultimate Tension (Lbs.) 5,772 lb.
• Qty.20 - 1/2” X 5-1/2” Wedge Anchors - 1/2” X 5-1/2” Wedge Anchors. Original box not included and a bit tarnished, Not sure of the brand. Package of 20. Shipped priority mail.
• 1 box (5) 1 1/4 X 9 Ramset Trubolt masonary anchors - 5 (1 box) Ramset Trubolt anchors. 1 1/4 X 9.
• MKT FASTENING 2758700S Wedge Anchor,316 SS,5/8x7,PK5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 5/8 in, Anchor Length 7 in, Max. Work Thickness 1 3/8 in, Thread Length 1 1/2 in, Thread Size 5/8 In.-11, Min. Embedment 2 3/4 in, Embedment In Concrete 5 5/8 in, Ultimate Pullout (Lb.) 9,294 lb, Ultimate Shear (Lb.) 9,659 lb, Ultimate Shear in 3000 PSI Concrete (Lb.) 9,659 lb, Ultimate Shear in 4000 PSI Concrete (Lb.) 9,659 lb, Ultimate Tension (Lbs.) 9,294 lb.
• MKT FASTENING 2738334B Wedge Anchor,303/304 SS,3/8x3 3/4,PK400 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 3 3/4 in, Max. Work Thickness 2 1/8 in, Thread Length 2 5/8 in, Thread Size 3/8 In.-16, Min. Embedment 1 5/8 in, Embedment In Concrete 3 3/8 in, Ultimate Pullout (Lb.) 3,556 lb, Ultimate Shear (Lb.) 3,151 lb, Ultimate Shear in 3000 PSI Concrete (Lb.) 3,151 lb, Ultimate Shear in 4000 PSI Concrete (Lb.) 3,151 lb, Ultimate Tension (Lbs.) 3,556 lb.
• MKT FASTENING M16145301 Wedge Anchor,Stl,M8,180mm,PK25 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 12 mm, Anchor Length 180 mm, Max. Work Thickness 100 mm, Thread Size M8 x 1.25mm, Min. Embedment 60 mm, Embedment In Concrete 60 mm, Package Quantity 25.
• ZORO SELECT B70420.075.0475 Wedge Anchor,SS,303 and 304,Plain,PK34 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 4 3/4 in, Max. Work Thickness 1 in, Thread Length 2 1/4 in, Thread Size 3/4 In.-10, Min. Embedment 3 1/4 in, Embedment In Concrete 3 1/4 in, Package Quantity 34.
• MKT FASTENING M14505301 Wedge Anchor Bolt,M16,132mm,PK2 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 24 mm, Anchor Length 132 mm, Max. Work Thickness 5 mm, Thread Size M16, Min. Embedment 120 mm, Package Quantity 2.
• MKT FASTENING M16105301 Wedge Anchor Stud,M8,80mm,PK10 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 12 mm, Anchor Length 80 mm, Max. Work Thickness 5 mm, Thread Size M8, Min. Embedment 70 mm, Package Quantity 10.
• MKT FASTENING M14305301 Wedge Anchor Bolt,M12,107mm,PK3 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 18 mm, Anchor Length 107 mm, Max. Work Thickness 5 mm, Thread Size M12, Min. Embedment 95 mm, Package Quantity 3.
• MKT FASTENING M16240301 Wedge Anchor Stud,M10,191mm,PK5 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 15 mm, Anchor Length 191 mm, Max. Work Thickness 95 mm, Thread Size M10, Min. Embedment 85 mm, Package Quantity 5.
• MKT FASTENING M14205301 Wedge Anchor,Stl,M10,93mm,PK25 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 15 mm, Anchor Length 93 mm, Max. Work Thickness 0 mm, Thread Size M10 x 1.50mm, Min. Embedment 71 mm, Embedment In Concrete 71 mm, Package Quantity 25.
• MKT FASTENING M14310301 Wedge Anchor,Stl,M12,117mm,PK20 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 18 mm, Anchor Length 117 mm, Max. Work Thickness 10 mm, Thread Size M12 x 1.75mm, Min. Embedment 80 mm, Embedment In Concrete 80 mm, Package Quantity 20.
• MKT FASTENING M16525301 Wedge Anchor,Stl,M16,187mm,PK10 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 24 mm, Anchor Length 187 mm, Max. Work Thickness 50 mm, Thread Size M16 x 2mm, Min. Embedment 100 mm, Embedment In Concrete 100 mm, Package Quantity 10.
• MKT FASTENING M14010301 Wedge Anchor,Stl,M6,75mm,PK50 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 10 mm, Anchor Length 75 mm, Max. Work Thickness 10 mm, Thread Size M6 x 1mm, Min. Embedment 50 mm, Embedment In Concrete 50 mm, Package Quantity 50.
• ZORO SELECT B09100.025.0250 Sleeve Anchor,Hex Nut,1/4" Dia.,PK700 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 1/4 in, Anchor Length 2 1/2 in, Thread Size 10, Min. Embedment 1 1/8 in, Ultimate Tension in 4000 PSI Concrete (Lb.) 1,694 lb, Package Quantity 700.
• MKT FASTENING M14505301 Wedge Anchor,Stl,M16,132mm,PK10 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 24 mm, Anchor Length 132 mm, Max. Work Thickness 0 mm, Thread Size M16 x 2mm, Min. Embedment 100 mm, Embedment In Concrete 100 mm, Package Quantity 10.
• MKT FASTENING M16205301 Wedge Anchor,Stl,M10,96mm,PK25 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 15 mm, Anchor Length 96 mm, Max. Work Thickness 0 mm, Thread Size M10 x 1.50mm, Min. Embedment 71 mm, Embedment In Concrete 71 mm, Package Quantity 25.
• ZORO SELECT B09100.050.0600 Sleeve Anchor,Hex Nut,1/2" Dia.,PK80 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 1/2 in, Anchor Length 6 in, Thread Size 3/8, Min. Embedment 1 7/8 in, Ultimate Tension in 4000 PSI Concrete (Lb.) 4,400 lb, Package Quantity 80.
• MKT FASTENING M16515301 Wedge Anchor,Stl,M16,157mm,PK10 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 24 mm, Anchor Length 157 mm, Max. Work Thickness 20 mm, Thread Size M16 x 2mm, Min. Embedment 100 mm, Embedment In Concrete 100 mm, Package Quantity 10.
• SUP-R STUD 2412414 Wedge Anchor,Carb. Stl,1/2"x4-1/4",PK50 - Wedge Anchor,Carb. Stl,1/2 In.x4-1/4 In.,PK50, Package Quantity 50.
• MKT FASTENING M16315301 Wedge Anchor,Stl,M12,132mm,PK20 - Wedge Anchor Stud, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 18 mm, Anchor Length 132 mm, Max. Work Thickness 20 mm, Thread Size M12 x 1.75mm, Min. Embedment 80 mm, Embedment In Concrete 80 mm, Package Quantity 20.
• ZORO SELECT B09200.025.0225 Sleeve Anchor,Flat Head Hex,PK800 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 1/4 in, Anchor Length 2 1/4 in, Thread Size 10, Min. Embedment 1 1/8 in, Ultimate Tension in 4000 PSI Concrete (Lb.) 1,694 lb, Package Quantity 800.
• ZORO SELECT B09100.025.0137 Sleeve Anchor,Hex Nut,1/4" Dia.,PK1100 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 1/4 in, Anchor Length 1 3/8 in, Thread Size 10, Min. Embedment 1 1/8 in, Ultimate Tension in 4000 PSI Concrete (Lb.) 1,694 lb, Package Quantity 1100.
• MKT FASTENING M14130301 Wedge Anchor,Stl,M8,127mm,PK25 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 12 mm, Anchor Length 127 mm, Max. Work Thickness 50 mm, Thread Size M8 x 1.25mm, Min. Embedment 60 mm, Embedment In Concrete 60 mm, Package Quantity 25.
• Simpson Strong Bolt 2 Wedge Anchors 3/8" x 3" Quantity 50 Concrete Anchors
• Simpson Strong Titen HD Heavy Duty Anchors 1/2" x 6" Quantity 15 Concrete Anchor - Galvanized Concrete Anchors.
• Simpson Strong Bolt 2 Wedge Anchors 3/8" x 5" Quanity 40
• Red Head WS-1236 Wedge Anchor ½" x 3-¾" Trubolt Pack of 25 - Make Supersized seem small.
• Box of 25, 1/2" x 3" Simpson Strong-Tie SL50300H Sleeve-All Anchor, Wedge Anchor
• Powers Fasteners 5/8" x 3-1/2" Sleeve Wedge Concrete Anchor Lot Of 20 - Warehouse Location: S4704. Prefer to pick it up yourself?. To get a freight quote we will need to know the following Country of Manufacture: United States. We choose the carrier.
• Qty.44 Red Head 3/8” Drop In Anchors 01891, RM-38 - Qty.44 Red Head 3/8” Drop In Anchors 01891, RM-38. Shipped with USPS Priority Mail.
• Lot Of 115 Redhead Rm-38 3/8"-16 Drop In Anchor
• Concrete anchors - 2" Lot of 4 -quick install - Concrete anchors. Set of 4 new anchors.
• Hillman 5014 Medium Duty Long Hollow Wall Anchor 1/4 in. (Pack of 6) - Hillman 1/4 in. L Steel Pan Head Hollow Wall Anchors 2 pk. Use to securely fasten mirrors, pictures, cabinets, and more to hollow walls. This anchor is an expandable sleeve that slides into pre-drilled hole in the wall.
• 1 Box 25/Box Powers Spike Hammer Drive Anchor Mushroom 3/8 X 6 9005556 (H138) - I WILL NOT BE BEAT ON PRICE. YOU WILL RECEIVE 1 BOX. Inventory Location Box #H138. When there is a quantity larger than one, the item you receive may be different from the photograph.
• 1 Box 100/Bx Powers Spike Hammer Drive Anchor Mushroom 1/4 X 2 1/2 9005528 (H133 - I WILL NOT BE BEAT ON PRICE. YOU WILL RECEIVE 1 BOX. Inventory Location Box #H133. When there is a quantity larger than one, the item you receive may be different from the photograph.
• 1/2" X 2 3/4" Concrete anchor bolts, Red Head WedgeAnchorsHeavy Duty (LOT OF14) - Concrete anchor bolts, Red Head Wedge Anchors Heavy Duty. SOLD AS A LOT OF 14. What you see in our photos is what you'll receive. US TERRITORIES ONLY!
• Red Head Masonry Wedge Anchors 5/8" X 7" Box of 10 OPEN BOX NEW - Red Head Masonry Wedge Anchors 5/8" X 7" Box of 10 OPEN BOX NEW. Shipped with USPS Priority Mail Padded Flat Rate Envelope.
• Sky Tool & Fastner Bundle of Chemical Anchors, Hammer-In Chemical Caps, & Rods - 1/2"-13 x 6' Plain 18-8 Stainless Steel Threaded Rod for Max Chemical Anchors (SST-TR5006) QTY: 50 (3 boxes of 50). (3 boxes of 10). QTY: 3 bags of miscellaneous washers. QTY: 3 bags of miscellaneous nuts.
• Zoro Select U09100.037.0250 Sleeve Anchor,Hex,Cst,3/8In,2-1/2In,Pk25 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 2 1/2 in, Thread Size 5/16, Min. ZORO SELECT. Zoro Select 90521Gr 3/4" Mnpt X 4 Ft Tbe Black Pipe Sch 80.
• Zoro Select U70411.075.0625 Wedge Anchor,3/4,6-1/4,Zp Carbn Stl,Pk2 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/4 in, Anchor Length 6 1/4 in, Max. Work Thickness 1 3/4 in, Thread Length 3 3/4 in, Thread Size 3/4 In.-10, Min.
• Zoro Select U70411.050.0550 Wedge Anchor,1/2,5-1/2,Zp Carbn Stl,Pk5 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/2 in, Anchor Length 5 1/2 in, Max. Work Thickness 2 in, Thread Length 3 3/4 in, Thread Size 1/2 In.-13, Min.
• Zoro Select U70411.037.0375 Wedge Anchor,3/8,3-3/4,Zp Carbn Stl,Pk10 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 3 3/4 in, Max. Work Thickness 1 1/8 in, Thread Length 2 1/4 in, Thread Size 3/8 In.-16, Min.
• Zoro Select U70411.037.0300 Wedge Anchor,3/8",3",Zp Carbon Stl,Pk10 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 3 in, Max. Work Thickness 9/16 in, Thread Length 1 1/2 in, Thread Size 3/8 In.-16, Min.
• Zoro Select U70411.100.0900 Wedge Anchor,1",9",Zp Carbon Stl, - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1 in, Anchor Length 9 in, Max. Work Thickness 4 in, Thread Length 3 7/8 in, Thread Size 1 In.-8, Min.
• (14 Qty. Variety Pack) 3/4" x 7" Long Wedge Anchors | Various Thread Lengths - Does Not Include Washer and Nut with wedge anchors. Various Thread Lengths.
• Red Head 5/8" x 4-1/4" Hex Sleeve Concrete Anchor - NEW - Red Head 5/8" x 4-1/4" Hex Sleeve Concrete Anchor - NEW Condition: New – Open box New in ugly package! Sleeve anchor will work as intended got beat up in vehicle as far as packaging goes! Brand: RED HEAD Type: Thank you for purchasing a quality Evotek product.
• (39 Qty. Variety Pack) 3/4"x5-1/2" Wedge Anchors | Various Thread Lengths - Concrete Wedge Anchors. Does Not Include Washer and Nut for anchors, see pictures . Various Thread Lengths. 24 Qty - with 1-5/8" Long Thread. 3 Qty - with 2" Long Thread. 2 Qty - with 2-3/4" Long Thread.
• Concrete Sleeve Anchor 1/2" x 4" Hex Nut Head, Zinc Plated, 10 QTY - Product Information.
• Concrete Sleeve Anchor 1/2" x 4" Hex Nut Head, Zinc Plated, 25 QTY - Product Information.
• Concrete Sleeve Anchor 1/2" x 4" Hex Nut Head, Zinc Plated, 50 QTY - Product Information.
• Red Head Wedge Anchors 1/2"X 4-1/4" Quanity of 2 - Red Head Wedge Anchor with nut and washer.
• Concrete Wedge Anchors Zinc Plated Masonry Anchors - 1/2" x 3-3/4" - 25 Pack - Includes nut and washer. 25 Quantity. Product Information.
• Concrete Wedge Anchors Zinc Plated Masonry Anchors - 1/2"-13 x 3-3/4" - 10 Pack - Concrete Wedge Anchors Zinc Plated Masonry Anchors - 1/2"-13 x 3-3/4". 10 Quantity. Product Information.
• Concrete Wedge Anchors Zinc Plated Masonry Anchors - 1/2"-13 x 3-3/4" - 5 Pack - Product Information.
• Concrete Wedge Anchors Zinc Plated Masonry Anchors - 5/8"-11 x 6" - 5 Pack - Product Information.
• Concrete Wedge Anchors Zinc Plated Masonry Anchors - 5/8"-11 x 6" - 25 Pack - 25 Quantity. Product Information.
• Concrete Wedge Anchors Zinc Plated Masonry Anchors - 5/8"-11 x 6" - 10 Pack - 10 Quantity. Product Information.
• 1/2" x 1-1/4" S.S. Stand-off, Extension, Spacer with 5/16 x 18 x 1/2" Threading - 1/2" x 1-1/4" Stainless Steel Stand-off, Extension, Linkage, or Spacer. With 5/16 x 18 x 1/2" Male and Female threading on ends. Each Stand-off/Extension, can be threaded into another Stand-off/Extension as shown in photos.
• Zoro Select U70411.037.0225 Wedge Anchor,3/8,2-1/4,Zp Carbn Stl,Pk25 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 2 1/4 in, Max. Work Thickness 3/16 in, Thread Length 3/4 in, Thread Size 3/8 In.-16, Min.
• RedHead CSWW-5842 Trubolt+ 316 Stainless Steel Wedge Anchor 5/8" x 4-1/4" (USA) - Concrete anchor wedge. Made in USA. All parts of this system are made from 316 stainless steel. If you buy a similar item at a tiny fraction of the wholesale price, do you think you are purchasing the real deal?.
• Dewalt 7413SD1 Concrete Wedge Anchor SDI 3/8 x 3-Inch - 9 pcs Pack Power-Stud+ - You will receive 9 bolts 9 washers and 9 nuts.
• 100 1/4"-20 X 2 1/4" Wedge Anchors, 304 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• Dewalt 7413SD1 Wedge Anchor SDI 3/8 x 3-Inch - 50 Pack Power-Stud+
• Lot of 10 pieces 3-1/2" Concrete Anchors with Washers
• M16x250mm (1/2x9 Inched) Hammer In Concrete Anchors (pack Of 4) - M16x250mm (1/2x9 Inched once set) Hammer In Concrete Anchors. See pictures for exact measurements. Come in a pack of 4 each. Shipped with USPS First Class.
• U.S. ANCHOR 045831 1/2"-13x3 3/4" ULTRAWEDGE+ ANCHOR STEEL ZINC CR+3 BOX OF 50x - HERE I HAVE A U.S. ANCHOR 045831 1/2"-13x3 3/4" ULTRAWEDGE+ ANCHOR STEEL ZINC CR+3 BOX OF 50x.
• MASSIVE LOT! BULK! Wedge Anchor, 371960, Hillman Fasteners, BOLTS, SCREWS, ETC. - MASSIVE LOT! RETAIL WELL OVER $1.5K!!!  BULK! Wedge Anchor, 371960, Hillman Fasteners, BOLTS, SCREWS, ETC.. Condition is "New". Incredible lot! Wire lock pins, stop nuts, hex cap, flat washer, metric, standard. Bind post, flat slotted, sae, corks, wood insert brass, sheet metal, lock washers, wood screws, hex nuts, fender washers, lag screws, self drilling, neoprene washer screws, machine screws,  power stud, stop nuts. You will receive exactly what you see in the pictures!  Shipping to lower 48 only! Thanks! Shop a off. 
• Sanko All Anchor Hammer Driven Concrete Anchors, 1/4x1-3/4, Drill Size 1/4”,50pc - Sanko All Anchor Hammer Driven Concrete Anchors, 1/4x1-3/4, Drill Size 1/4”,50pc. Shipped with USPS First Class.
• Red Head WS-3462 Trubolt Carbon Steel Wedge 3/4-Inch by 6 1/4" Anchor (10 Pack) - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc, Anchor Dia. 3/4 in, Anchor Length 6 1/4 in, Max. Work Thickness 2 1/4 in, Thread Length 4 3/8 in, Thread Size 3/4 In.-10, Min.
• (60) MKT Fastening Wedge Anchor 2612512, 1/2" x 5-1/2", Zinc Plated Steel - Wedge Anchor. Fastener Finish: Zinc Plated. Anchor Material: Steel. Anchor Length: 5 1/2 in. Includes: Nut and Washer. New, never used. Open box, lot of (60) anchors, as shown.
• Mkt Fastening M14010301 Wedge Anchor Bolt,M6,75Mm,Pk10 - Wedge Anchor Bolt, Seismic Approved Yes, Steel, Material Grade Class 8.8, Fastener Finish Zinc Plated, Anchor Dia. 10 mm, Anchor Length 75 mm, Max. Work Thickness 10 mm, Thread Size M6, Min. MKT FASTENING.
• Zoro Select B09150.037.0300 Sleeve Anchor,Hex Nut,3/8" Dia.,Pk250 - Sleeve Anchor, Stainless Steel, Material Grade 304, Anchor Dia. 3/8 in, Anchor Length 3 in, Thread Size 5/16, Min. ZORO SELECT. General Purpose. 3M 420 Foil Tape,2 In. X 5 Yd.,Dark Silver. Lincoln Electric K470-2 Welding Gun, 300A, 035-, 045 In, Flux-Core.
• Zoro Select B09150.050.0300 Sleeve Anchor,Hex Nut,1/2" Dia.,Pk140 - Sleeve Anchor, Stainless Steel, Material Grade 304, Anchor Dia. 1/2 in, Anchor Length 3 in, Thread Size 3/8, Min. ZORO SELECT. Zoro Select M07160.120.0020 M12-1.75 Socket Head Cap Screw, Zinc Plated Steel.
• Zoro Select B09100.062.0225 Sleeve Anchor,Hex Nut,5/8" Dia.,Pk90 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 5/8 in, Anchor Length 2 1/4 in, Thread Size 1/2, Min. ZORO SELECT. Zoro Select M07160.120.0020 M12-1.75 Socket Head Cap Screw, Zinc Plated Steel.
• Mkt Fastening 2558500 Wedge Anchor,Gr 5,5/8 X 5 In,Pk25 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 5 in, Max. Work Thickness 1 5/8 in, Thread Length 3 1/4 in, Thread Size 5/8 In.-11, Min.
• Mkt Fastening 2734512 Wedge Anchor,303/304 Ss,3/4X5 1/2,Pk5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 5 1/2 in, Max. Work Thickness 2 1/8 in, Thread Length 3 5/8 in, Thread Size 3/4 In.-10, Min.
• Mkt Fastening 1312Ss6 Drop-In Anchor,Non-Flange,1/2-13X2in,Pk5 - Drop-In Anchor, Non-Flange, Stainless Steel, Fastener Finish Plain, Anchor Thread Size 1/2 In.-13, Material Grade 316, Anchor Dia. 5/8 in, Anchor Length 2 in, Thread Depth 3/4 in, Bolt Dia. 1/2 in, Drill Bit Size 5/8 in, Min.
• Mkt Fastening 2734414 Wedge Anchor,303/304 Ss,3/4X4 1/4,Pk5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 4 1/4 in, Max. Work Thickness 7/8 in, Thread Length 2 3/8 in, Thread Size 3/4 In.-10, Min.
• (1000) Zip-It 1/2 x 1-5/8 All Metal Hollow Wall Drywall EZ Anchor #8 Screw Zamac - These anchors feature a sharp "W" style tip for fast accurate pilot hole drilling.
• (200) Zip-It 1/2 x 1-5/8 All Metal Hollow Wall Drywall EZ Anchors #8 Screw Zamac - These anchors feature a sharp "W" style tip for fast accurate pilot hole drilling.
• 20 pc power bull 1/4 x 1 3/8 machine head screws sleevel anchors flat regular
• Vintage 42 Cinch Lead And Copper Anchors 1/2 by 13 USA Dutch Boy - Vintage 42 Cinch Lead And Copper Anchors 1/2 by 13 USA Dutch Boy. Shipped with USPS Parcel Select Ground.
• Mkt Fastening 2758700 Wedge Anchor,303/304 Ss,5/8X7,Pk5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 5/8 in, Anchor Length 7 in, Max. Work Thickness 1 3/8 in, Thread Length 1 1/2 in, Thread Size 5/8 In.-11, Min.
• Earth Anchor Galvanized 3/4" x 35" - These were sold through Southwest Windpower to secure their line of off grid remote wind turbines to the ground. These are quality anchors (4) in the set, dish size approx. These could also be used as aircraft tie downs in grass or field.
• (40) 8 lots of 5 Elco EZH735MC Hangermate Concrete Anchors Accepts 3/8" Rod - INV# 13B 2021.01.
• Powers 07420 1/2" x 2-3/4" Carbon Steel Power Stud Wedge Anchor
• (25) DeWalt Stainless Steel Expansion Anchor 06230-PWR, Drop-In 5/8"-11 x 2-1/2" - Expansion Anchor. Anchor Material: Stainless Steel. Drop-In Anchor Type: Non-Flange. Anchor Thread Size: 5/8"-11. Anchor Length: 2-1/2 in. Drill Bit Size: 7/8 in. Minimum Hole Depth: 2 1/2 in.
• Mkt Fastening 1773000 Sleeve Anchor, 3/8 X 4In, Pk25 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 4 in, Thread Size 5/16-18, Max. Work Thickness 2 3/4 in, Min. MKT FASTENING. & Recepticles.
• Mkt Fastening 2734812 Wedge Anchor,303/304 Ss,3/4X8 1/2,Pk5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 8 1/2 in, Max. Work Thickness 1 3/4 in, Thread Length 2 in, Thread Size 3/4 In.-10, Min.
• Red Head Sww-3836 Wedge Anchor,316 Ss,3/8X3-3/4,Pk50 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 3 3/4 in, Max. Work Thickness 1 7/8 in, Thread Length 2 1/2 in, Thread Size 3/8 In.-16, Min.
• Zoro Select U09150.050.0300 Sleeve Anchor,Hex Nut,Sst,1/2In,3In,Pk10 - Zoro Select Mdp19-4 Dowel Pin,416Ss,8 Diax20mm L,Pk10. Sleeve Anchor, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 3 in, Thread Size 3/8, Min. ZORO SELECT.
• Mkt Fastening 271233S Wedge Anchor,316 Ss,1/2X3 3/4,Pk10 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 3 3/4 in, Max. Work Thickness 1 1/2 in, Thread Length 2 1/2 in, Thread Size 1/2 In.-13, Min.
• Mkt Fastening 2838300 Wedge Anchor,Galv. Steel, 3/8X3,Pk20 - MKT FASTENING 2838300 Wedge Anchor,Galv. Steel, 3/8x3,PK20. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 3/8 in, Anchor Length 3 in, Max. Work Thickness 1 3/8 in, Thread Length 1 7/8 in, Thread Size 3/8 In.-16, Min.
• (21) Brand New Ramset/Red Head Concrete Anchors 13A453 WS-1254 GWS-1254
• 24 LOT NEW Cobra Parawedge Concrete Anchor w/ Nuts & Washers 3/8" x 3.75" 498NS - Insert the nut with a clearance of 1/8" to the top of the anchor. Using a wrench, tighten the nut by turning clockwise until there is a strong resistance. (2 to 3 turns will fully set the anchor). Clean hole using a dust blower or compressed air.
• Red Head Ww-3454 Wedge Anchor,304 Ss,3/4X5-1/2,Pk10 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 5 1/2 in, Max. Work Thickness 1 1/2 in, Thread Length 3 5/8 in, Thread Size 3/4 In.-10, Min.
• Mkt Fastening 1764000 Sleeve Anchor, 1/4 X 1-1/2In, Pk50 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 1 1/2 in, Thread Size 3/16-24, Max. Work Thickness 1/2 in, Min. MKT FASTENING. Zoro Select M51060.100.0070 M10-1.50 Socket Head Cap Screw, Plain Stainless.
• Mkt Fastening 2738500 Wedge Anchor,303/304 Ss,3/8X5,Pk20 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 5 in, Max. Work Thickness 3 3/8 in, Thread Length 4 in, Thread Size 3/8 In.-16, Min.
• Mkt Fastening 271431S Wedge Anchor,316 Ss,1/4X3 1/4,Pk20 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 1/4 in, Anchor Length 3 1/4 in, Max. Work Thickness 1 in, Thread Length 2 1/4 in, Thread Size 1/4 In.-20, Min.
• Mkt Fastening 2611200 Wedge Anchor,Zinc Plated,1X12,Pk4 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 1 in, Anchor Length 12 in, Max. Work Thickness 3 in, Thread Length 4 in, Thread Size 1 In.-8, Min.
• Red Head Ww-10060 Wedge Anchor,304 Ss,1X6,Pk5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 1 in, Anchor Length 6 in, Max. Work Thickness 1/2 in, Thread Length 2 1/2 in, Thread Size 1 In.-8, Min.
• Zoro Select U70420.025.0225 Wedge Anchor,1/4",2-1/4",303/304,Pk50 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 1/4 in, Anchor Length 2 1/4 in, Max. Work Thickness 3/8 in, Thread Length 1 1/8 in, Thread Size 1/2 In.-13, Min.
• Mkt Fastening 2738334 Wedge Anchor,303/304 Ss,3/8X3 3/4,Pk20 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 3 3/4 in, Max. Work Thickness 2 1/8 in, Thread Length 2 5/8 in, Thread Size 3/8 In.-16, Min.
• Mkt Fastening 2858412 Wedge Anchor,Galv. Steel, 5/8X4 1/2,Pk5 - MKT FASTENING 2858412 Wedge Anchor,Galv. Steel, 5/8x4 1/2,PK5. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 5/8 in, Anchor Length 4 1/2 in, Max. Work Thickness 1 3/4 in, Thread Length 2 5/8 in, Thread Size 5/8 In.-11, Min.
• Mkt Fastening 2812414 Wedge Anchor,Galv. Steel, 1/2X4 1/4,Pk10 - MKT FASTENING 2812414 Wedge Anchor,Galv. Steel, 1/2x4 1/4,PK10. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 1/2 in, Anchor Length 4 1/4 in, Max. Work Thickness 2 in, Thread Length 3 in, Thread Size 1/2 In.-13, Min.
• Mkt Fastening 2712414 Wedge Anchor,303/304 Ss,1/2X4 1/4,Pk10 - Lumapro 2Fmn3 Miniature Lamp,1156,27W,S8,12.8V,Pk10. Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 4 1/4 in, Max. Work Thickness 2 in, Thread Length 3 in, Thread Size 1/2 In.-13, Min.
• Mkt Fastening 2714214 Wedge Anchor,303/304 Ss,1/4X2 1/4,Pk20 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 1/4 in, Anchor Length 2 1/4 in, Max. Work Thickness 1 1/8 in, Thread Length 1 3/8 in, Thread Size 1/4 In.-20, Min.
• Mkt Fastening 2858500 Wedge Anchor,Galv. Steel, 5/8X5,Pk5 - MKT FASTENING 2858500 Wedge Anchor,Galv. Steel, 5/8x5,PK5. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 5/8 in, Anchor Length 5 in, Max. Work Thickness 2 1/4 in, Thread Length 3 1/4 in, Thread Size 5/8 In.-11, Min.
• Red Head Sww-3830 Wedge Anchor,316 Ss,3/8X3,Pk50 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 3 in, Max. Work Thickness 1 1/8 in, Thread Length 1 3/4 in, Thread Size 3/8 In.-16, Min.
• Mkt Fastening 275860S Wedge Anchor,316 Ss,5/8X6,Pk5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 5/8 in, Anchor Length 6 in, Max. Work Thickness 3/8 in, Thread Length 4 1/8 in, Thread Size 5/8 In.-11, Min.
• Mkt Fastening 265840I Drop-In Anchor,5/8-11 X 4 In - Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Zinc Plated, Anchor Dia. 7/8 in, Anchor Length 4 in, Thread Size 5/8 In.-11, Ultimate Tension (Lbs.). MKT FASTENING. Light Industrial. & Recepticles.
• Zoro Select B09100.062.0300 Sleeve Anchor,Hex Nut,5/8" Dia.,Pk80 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 5/8 in, Anchor Length 3 in, Thread Size 1/2, Min. ZORO SELECT. Wera 05020079001 Ratcheting Wrench,Sae,9/16" Head Sz. General Purpose.
• Mkt Fastening 2738214 Wedge Anchor,303/304 Ss,3/8X2 1/4,Pk20 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 2 1/4 in, Max. Work Thickness 5/8 in, Thread Length 1 3/16 in, Thread Size 3/8 In.-16, Min.
• Zoro Select U09200.025.0400 Sleeve Anchor,Flat,Cst,1/4In,4In,Pk50 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 4 in, Thread Size 10, Min. ZORO SELECT. Zoro Select M39090.080.0036 Dowel Pin,Steel,8X36mm,Pk25.
• Mkt Fastening 2558812 Wedge Anchor,Gr 5,5/8 X8 1/2,Pk25 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 8 1/2 in, Max. Work Thickness 5 1/8 in, Thread Length 1 1/2 in, Thread Size 5/8 in x 8-1/2 in, Min.
• Zoro Select U70420.037.0300 Wedge Anchor,3/8",3",303/304,Pk10 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 3 in, Max. Work Thickness 9/16 in, Thread Length 1 1/2 in, Thread Size 3/8 In.-16, Min.
• Zoro Select U70420.050.0425 Wedge Anchor,1/2",4-1/4",303/304,Pk10 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 4 1/4 in, Max. Work Thickness 3/4 in, Thread Length 2 1/2 in, Thread Size 1/2 In.-13, Min.
• Mkt Fastening 263412T Wedge Anchor,Zinc Plated,3/4X12,Pk5 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/4 in, Anchor Length 12 in, Max. Work Thickness 5 1/4 in, Thread Length 4 in, Thread Size 3/4 In.-10, Min.
• Mkt Fastening 2638334 Wedge Anchor,Zinc Plated,3/8X3 3/4,Pk20 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 3 3/4 in, Max. Work Thickness 2 1/8 in, Thread Length 2 5/8 in, Thread Size 3/8 In.-16, Min.
• Zoro Select U70420.062.0450 Wedge Anchor,5/8",4-1/2",303/304,Pk5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 5/8 in, Anchor Length 4 1/2 in, Max. Work Thickness 9/16 in, Thread Length 2 13/16 in, Thread Size 5/8 In.-11, Min.
• Mkt Fastening 2838500 Wedge Anchor,Galv. Steel, 3/8X5,Pk20 - MKT FASTENING 2838500 Wedge Anchor,Galv. Steel, 3/8x5,PK20. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 3/8 in, Anchor Length 5 in, Max. Work Thickness 3 3/8 in, Thread Length 4 in, Thread Size 3/8 In.-16, Min.
• Mkt Fastening 2158600 Seismic Wedge Anchor,5/8X6,Pk5 - Seismic Wedge Anchor, Seismic Approved Yes, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 6 in, Max. Work Thickness 1 1/2 in, Thread Length 2 in, Thread Size 5/8 In.-11, Min.
• Mkt Fastening 2638234 Wedge Anchor,Zinc Plated,3/8X2 3/4,Pk20 - Mkt Fastening 13380Sh Drop-In Anchor,Flange,3/8-16X3/4In,Pk20. Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 2 3/4 in, Max.
• Mkt Fastening 263445I Drop-In Anchor,3/4-10 X 4-5/8 In - Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Zinc Plated, Anchor Dia. 1 in, Anchor Length 4 5/8 in, Thread Size 3/4 In.-10, Ultimate Tension (Lbs.). MKT FASTENING. Norton Abrasives 66261058456 Flap Wheel,Ao,6 In Diax1 In Wx2 In Ah,Md.
• Zoro Select U70420.050.0375 Wedge Anchor,1/2",3-3/4",303/304,Pk10 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 3 3/4 in, Max. Work Thickness 11/16 in, Thread Length 2 in, Thread Size 1/2 In.-13, Min.
• Mkt Fastening 271241S Wedge Anchor,316 Ss,1/2X4 1/4,Pk10 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 4 1/4 in, Max. Work Thickness 2 in, Thread Length 3 in, Thread Size 1/2 In.-13, Min.
• Mkt Fastening 283412T Wedge Anchor,Galv. Steel, 3/4X12,Pk4 - MKT FASTENING 283412T Wedge Anchor,Galv. Steel, 3/4x12,PK4. Wedge Anchor, Seismic Approved No, Steel, Fastener Finish Galvanized, Anchor Dia. 3/4 in, Anchor Length 12 in, Max. Work Thickness 8 5/8 in, Thread Length 4 in, Thread Size 3/4 In.-10, Min.
• Mkt Fastening 273830S Wedge Anchor,316 Ss,3/8X3,Pk20 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 316, Fastener Finish Plain, Anchor Dia. 3/8 in, Anchor Length 3 in, Max. Work Thickness 1 3/8 in, Thread Length 1 7/8 in, Thread Size 3/8 In.-16, Min.
• Mkt Fastening 2758600 Wedge Anchor,303/304 Ss,5/8X6,Pk5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 5/8 in, Anchor Length 6 in, Max. Work Thickness 3/8 in, Thread Length 4 1/8 in, Thread Size 5/8 In.-11, Min.
• Red Head Ww-5842 Wedge Anchor,304 Ss,5/8X4-1/4,Pk10 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 5/8 in, Anchor Length 4 1/4 in, Max. Work Thickness 7/8 in, Thread Length 2 1/2 in, Thread Size 5/8 In.-11, Min.
• Zoro Select U09100.025.0225 Sleeve Anchr,Hex,Cst,1/4In,2-1/4In,Pk100 - ZORO SELECT. Zoro Select U20300.137.2400 Fully Threaded Rod, 1-3/8"-6, 2 Ft, Steel, Grade A. Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 2 1/4 in, Thread Size 10, Min.
• Mkt Fastening 2734434 Wedge Anchor,303/304 Ss,3/4X4 3/4,Pk5 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 4 3/4 in, Max. Work Thickness 1 3/8 in, Thread Length 2 7/8 in, Thread Size 3/4 In.-10, Min.
• Mkt Fastening 2712234 Wedge Anchor,303/304 Ss,1/2X2 3/4,Pk10 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 304, Fastener Finish Plain, Anchor Dia. 1/2 in, Anchor Length 2 3/4 in, Max. Work Thickness 1/2 in, Thread Length 1 1/2 in, Thread Size 1/2 In.-13, Min.
• Mkt Fastening 2538300 Wedge Anchor,Gr 5,3/8 X 3 In,Pk50 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 3 in, Max. Work Thickness 1 in, Thread Length 1 7/8 in, Thread Size 3/8 In.-16, Min.
• Zoro Select Trbws1422gr9c Wedge Anchor,Zinc,1/4X2 1/4,Pk900 - Wedge Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 2 1/4 in, Thread Length 3/4 in, Thread Size 1/4 In.-20, Min. -, Ultimate Shear (Lb.). 1,813 lb, Ultimate Tension (Lbs.).
• Mkt Fastening 2558700 Wedge Anchor,Gr 5,5/8 X 7 In,Pk25 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 7 in, Max. Work Thickness 3 5/8 in, Thread Length 1 1/2 in, Thread Size 5/8 In.-11, Min.
• Mkt Fastening 2538500 Wedge Anchor,Gr 5,3/8 X 5 In,Pk50 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 3/8 in, Anchor Length 5 in, Max. Work Thickness 3 in, Thread Length 4 in, Thread Size 3/8 In.-16, Min.
• Zoro Select B09200.037.0400 Sleeve Anchor,Flat Head Hex,Pk200 - Sleeve Anchor, Carbon Steel, Material Grade Not Graded, Anchor Dia. 3/8 in, Anchor Length 4 in, Thread Size 5/16, Min. ZORO SELECT. Zoro Select M01030.100.0030 Square Head Bolt, Steel, Class 8, Black Oxide.
• Zoro Select B70420.075.0550 Wedge Anchor,Ss,303 And 304,Plain,Pk30 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 3/4 in, Anchor Length 5 1/2 in, Max. Work Thickness 1 5/16 in, Thread Length 3 in, Thread Size 3/4 In.-10, Min.
• Zoro Select U09200.025.0312 Sleeve Anchor,Flt,Cst,1/4In,3-1/8In,Pk50 - Sleeve Anchor, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 3 1/8 in, Thread Size 10, Min. ZORO SELECT. Zoro Select U51007.056.0400 9/16"-18 Hex Head Cap Screw, Plain 18-8 Stainless.
• Zoro Select U70411.087.0800 Wedge Anchor,7/8",8",Zp Carbon Stl,Pk2 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 7/8 in, Anchor Length 8 in, Max. Work Thickness 3 1/8 in, Thread Length 3 7/8 in, Thread Size 7/8 In.-9, Min.
• Zoro Select U70411.025.0175 Wedge Anchor,1/4,1-3/4,Zp Carbn Stl,Pk50 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 1/4 in, Anchor Length 1 3/4 in, Max. Work Thickness 1/8 in, Thread Length 5/8 in, Thread Size 1/4 In.-20, Min.
• Zoro Select U70420.062.0600 Wedge Anchor,5/8",6",303/304,Pk2 - Wedge Anchor, Seismic Approved No, Stainless Steel, Material Grade 303 and 304, Fastener Finish Plain, Anchor Dia. 5/8 in, Anchor Length 6 in, Max. Work Thickness 2 in, Thread Length 4 13/16 in, Thread Size 5/8 In.-11, Min.
• Zoro Select U70411.062.0450 Wedge Anchor,5/8,4-1/2,Zp Carbn Stl,Pk5 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 4 1/2 in, Max. Work Thickness 9/16 in, Thread Length 2 5/16 in, Thread Size 5/8 In.-11, Min.
• Zoro Select U70411.062.0350 Wedge Anchor,5/8,3-1/2,Zp Carbn Stl,Pk5 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Not Graded, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 3 1/2 in, Max. Work Thickness 1/8 in, Thread Length 1 5/16 in, Thread Size 5/8 In.-11, Min.
• Mkt Fastening 2558600 Wedge Anchor,Gr 5,5/8 X 6 In,Pk25 - Wedge Anchor, Seismic Approved No, Steel, Material Grade Grade 2, Fastener Finish Zinc Plated, Anchor Dia. 5/8 in, Anchor Length 6 in, Max. Work Thickness 2 5/8 in, Thread Length 4 1/8 in, Thread Size 5/8 In.-11, Min.
• QTY=22: Stainless Steel 5-1/2" X 1/2" Wedge Anchors - See photos.
• Powers 3/8 x 2-1/2 Wedge-Bolts Stainless, 3/8 x 2-1/2 (410), 3/8 x 3 (410) READ - There are 20 of the 3/8" x 2-1/2" (410) stainless bolts, and there are 22 of the 3/8" x 3"(410) stainless bolts. So what you are getting is a total of 73 bolts all together. Look at the pictures above, that have all the bolts laid out together.
• 3/4" x 3" Rawl Wedge Bolts 372186 QTY of 10 - They are 3/4" x 3", there are 10 in a box. I have 3 boxes of these.
• 5/8" x 4.5" Concrete Anchors Lot of 8 New Old Stock - 5/8" x 4.5" Lot of 8 Concrete Anchors.
• Dewalt Power-Stud SD1 1/2" x 5-1/2" Wedge Anchor 7424SD1
• Dewalt Power-Stud SD1 3/4" x 5-1/2" Wedge Anchor 7442SD1
• Powers 07441 3/4" x 4-3/4" Carbon Steel Power Stud Wedge Anchor
• SUP-R STUD 2438300 Wedge Anchor,Carb. Stl,3/8"x3",PK50 - Wedge Anchor,Carb. Stl,3/8 In.x3 In.,PK50, Package Quantity 50.
• vertigo rod hanger anchor 3/8”x 2-3/4” - vertigo rod hanger anchor 3/8”x 2-3/4”. Condition is New. Shipped with USPS Priority Mail. Please look at all pictures thanks for looking. Box C
• Hillman 371950 Steel Round Head High/Low Thread Wedge Anchor 5/8 Dia. x 6 L in. - Hillman 5/8 in. L Steel Round Head Wedge Anchor 10 pk. Building code approved. Hillman 370525 Nylon Truss Head High/Low Thread Anchor 3/16 Dia. Hillman 370549 Nylon Truss Head High/Low Thread Anchor 1/4 Dia.
• RED HEAD 5/8" X 7" Concrete Wedge Anchor With Washer & Hex Nuts
• 10.7 Pounds of 1/4"-20 x 1-3/4" Concrete Masonry Anchor Bolts Zinc Plated
• wej-it Ankr-tite Wedge Anchor 3/4 8-1/2 4 Anchors Free shipping - Wej-it Ankr-tite Wedge Anchor 3/4 8-1/2 4 Anchors. Only 4 Anchors Included with hardware. What you see in pics is what you will get. If the item is opened and/or seal is broken then we will open and check to make sure all of the parts are in working order.
• Wedge Anchor, 3/4" x 8-1/2" Red Head Trubolt Zinc Plated, New - Bit size 3/4". Zinc plated for indoor use.
• Anchors, ¾” X 7”, 3470 original Zinc Plated, Wej-It - The Original Wej-it Wedge Anchor provides unparalleled worksite convenience attributing to the anchors being an industry standard for over 62 years. They provide a unique "positive wedge" design that directs forces away from seams and corners to minimize loosening due to vibration.
• 3/4 X 4-1/4 ITW Red Head JS-34C Stud Anchor Box of 10 *NEW* Made In USA 3/4”-10 - ITW Red Head JS-34C Stud Anchor Box of 10 NEW 3/4 x 4 1/4". Condition is "New".
• (120) Cobra Flat Head 1/4 x 2 Hammer Drive Pin Anchors Nail-In Hammer-In
• 13015 Red Head 15-Pack 2-1/4-in x 3/8-in Wedge Anchors - Item #1215585 Model #12015. Ideal for fastening into concrete.
• 13017 Red Head 10-Pack 3-3/4-in x 1/2-in Wedge Anchors 12017 - Item #1215587 Model #12017. Ideal for fastening into concrete.
• 11013 Red Head 15-Pack 3-in x 3/8-in Sleeve Anchors - Item #60692 Model #11013. Use for fastening into concrete, hollow block, grout-filled block and brick.
• HILTI 2080046 (Box of 50) 2" x 1/2" Flush anchor Assy - Condition is "New".
• Hilti 457531 3/8" Drop-In Threaded Concrete Anchors - 50 pieces per box.
• DeWalt Smart DI Drop in Anchor 50 1/2" 6306SD NR - NEW - NEW DeWalt Smart DI Drop in Anchor 100 3/8" 6306SD 50 1/2" 6306SD NR.
• (7) 3/4"-7-1/2" HAMMER DRIVE Concrete Masonry Anchors C-TYPE YELLOW ZINC MF - Comprised of an anchor, a nut and a washer.
• (BOX OF 50) HILTI 2080046 2" x 1/2" Flush anchor Assy - New box of 50.
• Red Head Concrete Anchors 3/8"-16 3A493 (Quantity 45 Anchors) - 3/8"-16 BOLT, 3A493 (QUANTITY 45). THREAD: 3/8" -16. THREAD DEPT: 1/2". ANCHOR: STEEL. WH/#395/ T9-5 TOTE 16/ (1) CL.
• 3/4" x 4 1/4" Concrete Anchor BRAND NEW 2 Pieces Industrial Machinery Fasteners - We have 5 pieces of 3/4" x 4 1/4" concrete anchors.
• 3/4" x 6 1/4" Concrete Anchor BRAND NEW 2 Pieces Industrial Machinery Fasteners - We have 2 pieces of 3/4" x 6 1/4" concrete anchors.
• 3/4" x 2 1/2" Concrete Anchor BRAND NEW 10 Pieces Industrial Machinery Fasteners - We have 10 pieces of 3/4" x 2 1/2" concrete anchors.
• 1/4" x 1 3/8" Concrete Anchor BRAND NEW 50 Pieces Industrial Machinery Fasteners - We have 50 pieces of 1/4" x 1 3/8" concrete anchors.
• Lot of 4, 1/2-13 Drop In Anchor. Simpson Strong-Tie, DIAB50 - Lot of 4, 1/2-13 Drop In Anchor.
• Hillman 41396 Plastic Flat Head Conical Anchor #14-16 x 1-3/4 in. (Pack of 5) - Hillman. 250 in. L Plastic Flat Head Conical Anchor 25 pk. Product Type: Conical Anchor. The anchor is corrosion resistant and a pre-drilled hole is required. Use these anchors for general, light-duty, static applications where holding power is not critical.
• Star Anchors Wedge Anchor 1/2" x 2 3/4" Includes Nut & Washer 3535-28000 Lot4 - Star Wedge Anchor Bolts 1/2" x 2 3/4" Includes Nut And Washer. Lot of 4, 3 boxes are still sealed, one box is open and contains 23 Bolts. See photos for further details.
• Star Wedge Grip Wedge Anchor Bolts 1/4" x 3" Includes Nut And Washer Lot Of 2 - Star Wedge Anchor Bolts 1/4" x 3" Includes Nut And Washer Lot Of 2 boxes, 1 box has 84 for a total of 184. See photos for further details. One box only has 84.
• Wedge Anchor, Red Head 5/8" Diameter X 5" (New) - Wedge Anchor, Red Head 5/8" Diameter X 5" (New). Condition is "New". Shipped with USPS First Class.
• (20) New Trubolt Ws-3830 Wedge Anchors 3/8" X 3" Red Head Zinc Tb4C-3830 - (20) NEW TRUBOLT TB4C-3830 WEDGE ANCHORS. ITW/RedHead® - TB4C-3830 3/8" x 3" Red Head Trubolt+ Anchor Zinc Plated. ZINCK PLATED CARBON STEEL ANCHORS WITH WASHERS AND NUTS. Zinc plated for indoor use. Bit size 3/8".
• (12) New Trubolt Ws-1242 Wedge Anchors 1/2" X 4 1/4" Red Head Zinc - (12) NEW TRUBOLT WS-1242 WEDGE ANCHORS. Installation Instructions: ITW Redhead Trubolt Installation Instructions. Specification sheet: ITW Redhead Trubolt Specifications. Coating: Zinc plated. Nut width: 3/4".
• (50) New Trubolt Tb4C-3830 Ws-3830 Wedge Anchors 3/8" X 3" Red Head Zinc - (50) NEW TRUBOLT TB4C-3830 WEDGE ANCHORS. ITW/RedHead® - 3/8" x 3" Red Head Trubolt+ Anchor Zinc Plated. ZINCK PLATED CARBON STEEL ANCHORS WITH WASHERS AND NUTS. Zinc plated for indoor use. Bit size 3/8".
• HILTI- Sleeve Anchor HX 3/8" x 3" (000660274) Quantity 40 - I purchased a box of 50 and only used 10 so there is 40 left for you!HILTI- Sleeve Anchor HX 3/8” x 3” (000660274) Quantity 40. Condition is "New other".If you have any questions please ask and I will respond promptly. Take a look at my other listings I can’t combine shipping on most items. Be sure to save me as a seller because I am updating new items daily and as always for a great price.
• RL-34 Red Head Concrete Anchors - RL-34 Red Head Concrete Anchors. Condition is "New". Shipped with USPS First Class. 7-8
• (50 PK) 3/8"x3" Concrete Wedge Anchors, Simpson strong Tie Wedge WA37300
• Lot of 20, 5/8" x 5" Concrete Wedge Anchor w/ Nut and Washer, WA62500
• Wej-it Wedge Anchor 1/2" x 6" Box of 25 - East Canton, OH 44718. 330 S Wood St.
• Box of 50, 1/2-13 Drop In Anchor. Simpson Strong-Tie, DIAB50 - Box of 50, 1/2-13 Drop In Anchor.
• 50 New Red Head 3/8" X 3" Wedge Anchors Ws-3830 - 50 NEW RED HEAD 3/8" X 3" WEDGE ANCHORS WS-3830. Condition is new/overstock merchandise.
• Power Fasteners Nylon Nailin Drive Pin Anchor 3/16" x 1" #9407 4 pack lot of 3
• Power Fasteners Nylon Nailin Drive Pin Anchor 1/4" x 1" 9409 4 pack lot of 5 - 20 pieces total.
• Power Fasteners Nylon Nailin Drive Pin Anchor 1/4" x 1-1/2" 9410 4 pack lot of 4
• Power Fasteners Nylon Nailin Drive Pin Anchor 1/4" x 2" #9411 lot of 6(Qty 12) - Buy both lots and get 20% off both.
• Uline H-2121 Concrete Installation Kit H2121 - Perfect condition, never taken out of the box. One box per order.
• 50 Count FRAZER & JONES Mine Roof Support Anchors 2 Leaf Bail Type 5/8" RH - FRAZER & JONES. Mine Roof Support Anchors. NEW BOX OF 50 (Fifty) Anchors.
• Lot of 3, Concrete Wedge Anchor Bolts 5/8"x 10 ", Wej-It AT5810
• DOTTIE W14214 1/4 X 2-1/4" 100pcs Full Thread Zinc Plated Steel Wedge Anchor - Actual Picture of Unit. Local Pick-up is Available.
• Lot Of 44 Powers Powerstud Carbon Steel Wedge Expansion Anchor 07404 1/4"X3-1/4" - NEW POWERS POWERSTUD CARBON STEEL WEDGE EXPANSION ANCHOR. If your item is received in a different condition than stated (DOA, not working properly etc. USED, SOLD AS IS. USED, but in good working condition. ).
• Box of 50, 3/8-16 Drop In Anchor. Simpson Strong-Tie, DIAB37 - Box of 50, 3/8-16 Drop In Anchor.
• Box of 100, Simpson Strong Tie, 1/4" x 1-1/2" Tie-Wire Wedge Anchor, TWD25112
• One New Lot Of 3 Mkt 1-1/4" X 9" Galvanized Wedge Anchors 2811490. - THE PRODUCT NUMBER IS 2811490. Get images that.
• Rawl Lok/Bolts Concrete Anchors 3/4" X 5-3/4", 10pc NOS - Rawl Lok/Bolts Concrete Anchors 3/4" X 5-3/4", 10pc NOS. Shipped with USPS Priority Mail.Sh3-1
• 18 PCS 5 1/2 in X 1/2" Steel Expansion Wedge Anchor ZINC RED HEAD 13373
• 3 pack 6422 DRILL DIA-1/2 705591440203 PECO 1/2 X 3-3/4 Wedge Anchor Zinc
• Box Of 25 Haydon Rigid Clamp C-1102 X 4” 304 SS Assy - Box Of 25 Haydon Rigid Clamp C-1102 X 4” 304 SS Assy. Condition is NewSome of the boxes were damage during shipping but the items themselves have no visible damage to them. Please see pictures above. Seller Notes Item Location LR Floor
• 4 Wej-IT 3/4" x 12" Ankr-TITE Wedge Anchors - Hot Dipped Galvanized ATG3412 - PO Boxes may also be more.
• Case of 80 Wej-It 5/8" x 5" Ankr-TITE Wedge Anchors - Hot Dipped Galvanized - New - Case of 80.
• Sammys 1" for steel Drilling Rod Anchors Partial box of 17 - Sammys Drilling rod Anchors. Partial box of 17.
• Box of 25, 1/2" x 6" Sleeve Anchor, Wej-It HSA1260 - Box of 25, 1/2" x 6" Sleeve Anchor. Wej-It HSA1260.
• Lot of 2, 7/8" x 12" Concrete Wedge Anchor, Simpson Strong-Tie, WA87120
• Lot (40) Concrete Drop-In 1/2"-13 Threaded Expansion Anchors
• Box of 10, 3/4" x 2-1/2" Sleeve-All Sleeve Anchor, Simpson Strong-Tie
• Box of 25, 1/2" x 3" Sleeve-All Anchor, Simpson Strong-Tie SL50300H
• Soudal Soudafix Chemical Anchor 280ml CA1400 - Soudal Soudafix CA 1400. This chemical anchor does not require a special sized caulking gun. A standard hand caulking gun is sufficient enough. Suitable for various solid and hollow materials, such as concrete, cracked concrete, solid brick, hollow brink, porous concrete, natural stone, plasterboard walls, etc.
• Box Of 23 Hilti 34-512 5500100 Concrete Anchor 5/8in - Plug Valves. Line Reactors. Solenoid Valves. Solenoid Coils. Shock Absorbers. Safety and Security. Rotary Lobe Blowers. Roller Chains.
• Box Of 6 Hilti HSL-3-G M20/60 Expansoin Anchor - Plug Valves. Solenoid Valves. Solenoid Coils. Shock Absorbers. Safety and Security. Rotary Lobe Blowers. Roller Chains. Relief Valves.
• 1/4" x 1" Nylon Hammer Drive Anchor w/ Mushroom Head. Zinc Plated Nail Zappit - 1/4" x 1" Nylon Hammer Drive Anchor w/ Mushroom Head Zinc Plated Nail Zappit. Condition is New. Shipped with USPS First Class.
• ITW Sammys 5/16" x 1-3/4" (For 1/2" Rod, Concrete, Vertical) - 25 pc box - Designed for use on concrete. Mount style: Vertical. Rod thread size: 12"-13. Head type: 5/8" AF end-drilled.
• Dewalt Zinc Plated Carbon Steel Power Stud Wedge Expansion Anchor 5/8 X 3 1/2 - Dewalt 7430SD1. 5/8" x 3-1/2" Anchor Wedge box of 25. All as shown in photos.
• Heavy Duty Hd Anchor Screws For Thdb62800Hr10 Lot Of 8 - Keep this in mind. It will save us both the trouble. After it has been checked that the item has not been tampered or neglected in any form. I am not here to cheat any one or take any one’s hard earned money.
• Trubolt Wedge Anchors, 11562823A, 3/8" X 2-1/4", W/ Hardware, Lot Of 20 - MODEL: 11562823A. TRUBOLT WEDGE ANCHORS. LOT OF 20 . CS/#1227/WB SHELF 29/(1)CA. YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE.
• Trubolt Wedge Anchors, 52011, 1/2" X 4-1/4", W/ Hardware, Lot Of 8 - RED HEAD TRUBOLT WEDGE ANCHORS. MODEL: 52011. LOT OF 8 . CS/#1226/WB SHELF 29/(1)CA. YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE.
• 1/2 X 5-1/2 Steel Wedge Type Anchor Zinc Plated 50 Pieces - Looking for another size or quantity?. DISCOVER CARD.
• 1/2 X 4-1/2 Steel Wedge Type Anchor Zinc Plated 50 Pieces - Looking for another size or quantity?. DISCOVER CARD.
• 1/2 X 3-3/4 Steel Wedge Type Anchor Zinc Plated 50 Pack - WARREN FASTENINGS SOUTH. Looking for another size or quantity?.
• 3/8 X 3-3/4 Steel Wedge Type Anchor Zinc Plated 50 Pack - WARREN FASTENINGS SOUTH. Looking for another size or quantity?. DISCOVER CARD.
• 3/8 X 3 Steel Wedge-Type Anchor Zinc Plated 50 Pack - WARREN FASTENINGS SOUTH. Looking for another size or quantity?.
• 3/8 X 2-3/4 Steel Wedge-Type Anchor Zinc Plated 50 Pack - WARREN FASTENINGS SOUTH. Looking for another size or quantity?. DISCOVER CARD.
• 1/4 X 2-1/4 Steel Wedge Type Anchor Zinc Plated 100 Pack - WARREN FASTENINGS SOUTH. Looking for another size or quantity?.
• 1/4 X 1-3/4 Steel Wedge Anchor Zinc Plated 100 Pack… - WARREN FASTENINGS SOUTH. Looking for another size or quantity?. DISCOVER CARD.
• Red Head Sleeve Anchors 1/2"X3" Quantity 13 New - We primary injection test and secondary test all breakers that are listed as tested. We are always buying!
• Star Tampin 3/8 x 3” Concrete Anchor Bolts & Misc Hardware Lot Machine Shops - Star Tampin 3/8 x 3” Concrete Anchor Bolts & Misc Hardware Lot Machine Shops. Condition is Used. Shipped with USPS Priority Mail.
• Red Head Trubolt Wedge Anchors, Ws-5850, 5/8" X 5", W/ Hardware, Lot Of 10 - RED HEAD TRUBOLT WEDGE ANCHORS. CS/#1122/WB SHELF 26/(1)CA BOX: REG A. YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE. MODEL: WS-5850. BOX OF 10 .
• 20 Pack Hilti HSL-3 M10/20 #371778 4" Heavy Duty Wedge Anchor Bolts
• Red Head Wedge Anchor WS-5834 Box Of Ten 3 1/2” - They are 5/8” bolt size and 3 1/2” in length. They are new in box but have been on shelf awhile.
• Red Head Trubolt Wedge Anchors, 52011, 1/2" X 4-1/4", W/ Hardware, Lot Of 25 - RED HEAD TRUBOLT WEDGE ANCHORS. MODEL: 52011. YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE. BOX OF 20 .
• The Village Ironsmith MA100 Outdoor Masonry Anchors 10 H x 0.25 W in. - Product Type: Masonry Anchors. Plumbing Supplies And Fixtures. Building Materials And Products. Outdoor Living And Furniture. Indoor/Outdoor: Outdoor. Length: 2.5 in. Westinghouse 7003700 40 lbs. Capacity White Lamp Canopy Kit 7/16 x 5 Dia.
• Hilti Sleeve Anchor 3/8X4 Inch USS Flat Coated Steel Exterior Interior 5 Pack - Hilti's line of HLC Sleeve Anchors provides high performance load values in block, masonry and concrete base materials. The pre-assembled stud-type anchor design makes your fastening project easier and quicker, as you can accomplish through-type fastenings even in bottomless holes.
• Red Head WS-3822 Trubolt Carbon Steel Wedge 3/8" by 2-1/4" Anchor (50 per box) - Dependable, heavy duty, inspectable, wedge type expansion anchor. Made of zinc-plated carbon steel--standard anchor for all structural and in-plant uses. Versatile fully threaded design. One piece stainless steel expander clip resists corrosion.
• ITW Red Head WS-5860 5/8" x 6" Trubolt Carbon Wedge Anchor 10 Per Box - Dependable, heavy duty, inspectable, wedge type expansion anchor. Made of zinc-plated carbon steel--standard anchor for all structural and in-plant uses. Versatile fully threaded design. One piece stainless steel expander clip resists corrosion.
• ITW Red Head WS-5850 5/8" x 5" Trubolt Carbon Wedge Anchor 10 Per Box - Part NumberIRHWS5850.
• Red Head WS-5834 Trubolt Carbon Steel Wedge 5/8" by 3-1/2" Anchor (10 pack) - Dependable, heavy duty, inspectable, wedge type expansion anchor. Made of zinc-plated carbon steel--standard anchor for all structural and. Complete with nut and washer. in-plant uses. Versatile fully threaded design.
• Red Head WS-1416 Trubolt Carbon Steel Wedge 1/4-" by 1-3/4" Anchor (100 pieces) - Dependable, heavy duty, inspectable, wedge type expansion anchor. Made of zinc-plated carbon steel--standard anchor for all structural. One piece stainless steel expander clip resists corrosion. Thread length: 3/4 in.
• RAMSET WS-3442 TRUBOLT WEDGE ANCHORS 3/4 X 4-1/4" 10 Per Box - Dependable, heavy duty, inspectable, wedge type expansion anchor. Made of zinc-plated carbon steel--standard anchor for all structural and in-plant uses. Versatile fully threaded design. One piece stainless steel expander clip resists corrosion.
• RAMSET WS-3446 TRUBOLT WEDGE ANCHORS 3/4 X 4-3/4" 10 Per Box - RAMSET WS-3446 TRUBOLT WEDGE ANCHORS 3/4 X 4-3/4". • Trubolt Carbon Steel with Zinc Plating. Itw Ramset Red Head WS-3446 Specifications Itw Ramset Red Head WS-3446 Features 0002" Thickness.
• ITW Redhead Trubolt 1/4″ X 2-1/4″ Carbon Steel Wedge Anchor WS-1422 (100/Box) - Trubolt Wedge anchors feature a stainless steel expansion clip, threaded stud body, nut and washer. Anchor bodies are made of plated carbon steel, hot-dipped galvanized carbon steel, type 304 stainless steel or type 316 stainless steel as identified in the drawings or other notations.
• Red Head WS-1432 Trubolt Carbon Steel Wedge 1/4" by 3-1/4" Anchor (100 per Box) - Dependable, heavy duty, inspectable, wedge type expansion anchor. Made of zinc-plated carbon steel--standard anchor for all structural. Complete with nut and washer. Thread length: 2-1/4 in. Overall length: 3-1/4 in.
• 3/8" x 6" Phillips Flathead Concrete Sleeve Anchor
• Powers 9240, 1/2"-13 Calk-In Anchor Box of 5
• CONFAST 3/4" x 7" Wedge Anchor Zinc Plated Box of 10 concrete fastening system - CONFAST 3/4" x 7" Wedge Anchor Zinc Plated Box of 10 concrete fastening system. Condition is New. Shipped with USPS Priority Mail. B12a
• (20) 5/8" X 6" Concrete Wedge Anchor With Washer & Hex Nut Zinc Plated - (20 Pieces) 5/8" X 6" Concrete Wedge Anchor With Flat Washer & Hex Nut / Zinc Plated. Assembled With Hex Nut & Flat Washer. Coating = Clear Zinc Plating. Material = Steel.
• (80) 5/8" X 6" Concrete Wedge Anchor With Washer & Hex Nut Zinc Plated - (80 Pieces) 5/8" X 6" Concrete Wedge Anchor With Flat Washer & Hex Nut / Zinc Plated. Assembled With Hex Nut & Flat Washer. Coating = Clear Zinc Plating. Material = Steel.
• (49) Anchor Wedge Concrete Bolts & Redhead Drop-In, Misc Sizes, See Description - (49) Anchor Wedge Concrete Bolts & Redhead Drop-In, Misc Sizes, See Description. Shipped with USPS Priority Mail.Free shipping on orders over $100! Thanks(16) 1/4” x 4-1/2” Zinc Plated(7) 3/8” x 3” Zinc Plated(4) 3/8” x 3-3/4” Galvanized (6) 1/2” x 3-1/2” Stainless Steel(17) 1/4” x 1” Drop-In RedHeads
• Hilti Bolts, Hsl-B M12-25
• Hilti Bolts - Hsl-B M20-30
• 12 Concrete Bent Anchor Bolts 3/16''x 1 1/2x 8" W/ Lock Washers-Washers And Nuts - 10 Concrete Bent Anchor Bolts 3/16''x 3/4''x 8" W/ Lock Washers-Washers And Nuts. Condition is New. Shipped with USPS Parcel Select Ground.
• 10 Calmark Corp. PCB Wedge / Card Lok 240 Series. EZ Circuit Board Mounting! - 10 Calmark Corp. PCB Wedge / Card Lok 240 Series. EZ Circuit Board Mounting! PCB Wedge / Card Lok Series 240 P/N: 240-1172-3.80H. These are designed to facilitate the mounting of your circuit boards in a chassis that doesn't otherwise have slots for which to mount the board.
• Hangermate EZH155 1/4" (50ct) Rod To Steel 1/4"x1" cross drilled - (50) Hangermate EZH155 1/4" Rod To Steel. 1/4"x1". Condition is New. Shipped with USPS First Class. Details in pictures section.
• (28) Wej-it CS258 Angle Cut Stud Assemblies 5/8" x 7-1/2" S42 - Failure to adhere to this policy will result in cancellation of order.
• 1/2 X 3 3/4 Concrete Anchor Bolts NOS Unused (8 pcs) - 5/8" X 7”Concrete Anchor Bolts NOS Unused (6 pcs). Shipped with USPS Priority Mail.
• lot of (8) vintage ackerman johnson ringrips 3/4 100 per box masonry-1003
• Qty 50 Power-Stud+ Concrete Anchor Bolts 1/2" x 4-1/2" Includes Nuts & Washers
• (2) 1.25" x 9" Concrete Wedge Anchors M165 - Failure to adhere to this policy will result in cancellation of order. No Washers Included.
• (3) 1.25" x 12" Concrete Wedge Anchors S42 - Failure to adhere to this policy will result in cancellation of order. No Washers Included.
• Dewalt Zinc Plated Carbon Steel Power Stud Wedge Expansion Anchor 5/8 X 3 1/2 - Suitable base materials include normal-weight concrete, structural sand-lightweight concrete and concrete over steel deck. The anchor is manufactured with a zinc plated carbon steel body and expansion clip.
• *NOS* (10) Wej-It Spin-Tite Chemical Capsules 27/32" x 4-3/2" M20-34 M144 - Failure to adhere to this policy will result in cancellation of order.
• *NOS* (10) Wej-It Spin-Tite Chemical Capsules 9/16" x 4-1/2" M12-12 M144 - Failure to adhere to this policy will result in cancellation of order.
• [Lot of 19] Red Head 1/2" x 4 1/4" 11272 Wedge Anchors Hex Nut Expansion - 19 Anchors and Bolts, 14 Washers. Lot pictured is lot you will receive.
• DeWalt 3-3/4" x 1/2" Steel Expansion Wedge Anchors 7722HD5-PWR (96 Pieces) - Wedge Anchor Type: Expansion Wedge Anchor. Wedge Anchors. Anchor Dia.1/2" Anchor Length: 3-3/4". ICC Approved for Cracked Concrete: No. ICC Approved for Un-Cracked Concrete: No. Anchor Material: Carbon Steel.
• 1/4 x 3-1/4" Concrete Wedge Anchors, Yellow Zinc, ASTM F1941, CHOOSE QTY - Cold forged. 10X the corrosion resistance of standard zinc.
• 1/2" x 6" Sleeve Anchor | Hot Dip Galvanized | Hex Head | 10pcs per Box - Hot Dip Galvanized Finish, Hex Head Type. Hot-Dip Galvanizing (HDG) is a unique process that provides superior corrosion protection to steel. As a result, hot-dip galvanized steel provides great resistance, tough coating, complete protection, less maintenance and long life, even when used outdoors.
• 1/2" x 5" Sleeve Anchor | Hot Dip Galvanized | Hex Head | 20pcs per Box - Hot Dip Galvanized Finish, Hex Head Type. Hot-Dip Galvanizing (HDG) is a unique process that provides superior corrosion protection to steel. As a result, hot-dip galvanized steel provides great resistance, tough coating, complete protection, less maintenance and long life, even when used outdoors.
• 1/2" x 4" Sleeve Anchor | Hot Dip Galvanized | Hex Head | 20pcs per Box - Hot Dip Galvanized Finish, Hex Head Type. Hot-Dip Galvanizing (HDG) is a unique process that provides superior corrosion protection to steel. As a result, hot-dip galvanized steel provides great resistance, tough coating, complete protection, less maintenance and long life, even when used outdoors.
• 5/8" x 6" Sleeve Anchor | Hot Dip Galvanized | Hex Head | 10pcs per Box - Hot Dip Galvanized Finish, Hex Head Type. Hot-Dip Galvanizing (HDG) is a unique process that provides superior corrosion protection to steel. As a result, hot-dip galvanized steel provides great resistance, tough coating, complete protection, less maintenance and long life, even when used outdoors.
• (25pk) SIMPSON STRONG-TIE WA50512 1/2" x 5-1/2" WEDGE-ALL ANCHOR STUD *BR2 - We are human and mistakes are a slim possibility. We will handle the situation to the best of our ability.
• 5 Ea. 3/8" x 4" Power Lok-Bolt Flat Philips Combo Head HLC AS Sleeve Anchors - The Lok-Bolt anchor is a pre-assembled single unit sleeve anchor in carbon steel which can be used in concrete, block, brick and stone. The Lok-Bolt is designed to draw the fixture into full bearing against the base material through the action of its unique and flexible compression ring.
• Wej-It 5/8" x 3-1/2" Hex Nut Wedge Anchors (ZAT5832) - 5 pc Box - Original Wej-it anchors.
• RED HEAD TRUBOLT Wedge Anchor 1/2" x 3-3/4" WS-1236 (Box of 25) - ® - WS-1236 - 1/2" x 3-3/4" Trubolt Anchor. Thread Length 2-1/4". If the condition is labeled USED or PRE-OWNED : It has normal wear and tear from previous owner usage.
• Hilti Kwik Bolt 3, 1/4 X 3-1/4, 100Ea W/ Nut And Washer 304 Stainless Pn 282541 - P/N 282541. STAINLESS STEEL 304. BOX OF 100. KB3 ANCHOR BOLTS WITH WASHERS AND NUTS. 1/4" X 3 1/4" LONG.
• Bag of 350 Plastic precast inserts size 1/4 x 1 1/2 molding casting projects - New 350 in each bag. Order guy bought the wrong ones for our projects. Multiple bags avail.
• Hilti Kwik Bolt 3,Wedge Anchor 1/2 X 7 W/ Nuts And Washers Carbon Stl Pn 282529 - P/N 282529. WEDGE ANCHOR, CARBON STEEL. WITH WASHERS AND HEX NUTS.
• Hilti Kwik Bolt 3, Hot Dipped Gal., 3/4X8 P/N 378091 Wedge Anchor, Nut & Washer - P/N 378091. HOT DIPPED GALVANIZED. 10 BOLT TO BOX WITH WASHERS AND NUTS. MATERIAL IS EXCELLENT CONDITION.
• Hilti Kwik Bolt 3, 1 X 12 Lt, 5 Each Bolt Nut And Washers Carbon Steel Pn 286019 - KB3 WEDGE ANCHOR. 1" X 12" HEX NUT AND WASHER. CARBON STEEL.
• Hilti Kb3,1/2" X 3-3/4" X 25 Each W/ Nuts And Washers Carbon Steel Pn 282526 - KB3 1/2" X 3-3/4" LG. BOX OF 25 EACH ANCHOR, WASHER AND NUTS. LONG THREADED.
• NEW!! RED HEAD 3/8 in. x 3 in. Hex-Head Sleeve Anchors (15-Pack) - RED HEAD 3/8 in. Condition is New.
• 2 HILTI HSL M16/50 Expansion Anchors 66595/0
• POWERS Power-Stud SD1 1/2" x 5-1/2" H#371942 (25 PACK) - If the condition is labeled USED or PRE-OWNED : It has normal wear and tear from previous owner usage. Box/bag may have been opened only for sake of taking photographs. See pictures for detail. Assembled Weight (in lbs).
• 3/8"-16 Wedge Expansion Anchors, Zinc Plated Steel for Concrete and Masonry - 3/8"-16Zinc Plated Steel Wedge Anchors. Commonly used to secure solid concrete or masonry surfaces. Instructions shown as second photo in photo gallery above. Material : Steel with Zinc Plating (CR+3, RoHS Compliant).
• Red Head WS-3822 Trubolt Wedge Anchor 3/8" X 2-3/4" Lot of 25 NEW - Trubolt Wedge Anchor 3/8" X 2-3/4". Red Head WS-3822.
• Concrete Sleeve Anchor, 3/4"-10 X 5", 5 3/4" Oal, 7/8" Anchor Diameter, Lot Of 3 - CONCRETE SLEEVE ANCHOR. ANCHOR LENGTH: 5". THREAD SIZE: 3/4"-10. MATERIAL: STEEL. YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE.
• Concrete Sleeve Anchor, 3/4"-10 X 5", 5 3/4" Oal, 7/8" Anchor Dia., Lot Of 10 - CONCRETE SLEEVE ANCHOR. ANCHOR LENGTH: 5". THREAD SIZE: 3/4"-10. MATERIAL: STEEL. YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE.
• 3/8" X 3" Hex Head Sleeve Anchors. Box Of 50.
• Mixed Lot of 29 Red Head Trubolt 3/4" & 1/2"x 5-1/2" + Steel Concrete Fasteners
• 10-pack of 316 Stainless Concrete Sleeve Anchor BOLT ONLY - It does not include a sleeve, nut, or washer. Thread: 1/2-13 UNC.
• 10-pack of 316 Stainless Concrete Sleeve Anchor BOLT ONLY - It does not include a sleeve, nut, or washer. Length: 3.782"/3.718" 1/2-13 UNC Thread.
• Uniset 0.145" Shank Diam, Grade 1062 Steel Powder Actuated Drive Pin "Lot of 5" - We have 5 boxes of 100 fasteners.
• Red Head 10-Pack 6-in x 5/8-in Wedge Anchors - Ideal for fastening into concreteGreat for attaching structural supports to concrete, tilt-up construction, highway rails and posts, electrical, HVAC, plumbing systems, as well as metal doors and window framesFully threaded design accommodates various fixture thicknessesSteel construction with zinc plating for added durability
• RED HEAD ITW TRUBOLT 5/8" x 4-1/4" WEDGE ANCHOR WS-5842 NEW CONCRETE QTY:10 - UP FOR SALE IS A BOX OF 10 RED HEAD TRUBOLT 5/8" x 4-1/4" WEDGE CONCRETE ANCHORS. THE PART # IS :WS-5842. LET THE PICTURES PROVIDED BE YOUR GUIDE.
• (25PK) U.S. ANCHOR 157220 1/2"-13x5 1/2" ULTRAWEDGE+ ANCHOR STEEL ZINC CR+3 *T5 - We are human and mistakes are a slim possibility. We will handle the situation to the best of our ability.
• Redhead 3/8" x 3-3/4" Trubolt® 304SS Wedge Anchor - (7 are missing from a box of 50). Manufacturer # WW3836.
• WEJ - IT 5/8 x 3-1/2" Wedge Anchors #38519 - Wedge Anchors. 155 Center Ct. Venice, FL 34285. Unused unit. Industry Recycles.
• Phillips Red Head Concrete Anchor Cat# JS-34H 3/4"x3-1/4" Thread Lot of 8 (New) - 6-1/4" Overall Length.
• 5/8" x 4-1/2" Wedge Anchors - US Anchor Wedge Anchors. 13 pieces in the box.
• Ramset DynaBolt HN-3830 Sleeve Anchors 3/8"x 3" - 50 in Box.
• Ramset DynaBolt HN-5842 Sleeve Anchors 5/8"x 4.25" - 10 in Box.
• 5/8" x 3-1/2" Wedge Anchor - US Anchor Wedge Anchors. 25 pieces in the box.
• 5/8" x 8" Wedge Anchor - US Anchor Wedge Anchors. 25 pieces in the box.
• 1/2" x 2-3/4" Wedge Anchor - US Anchor Wedge Anchors. 25 pieces in the box.
• 1/2" x 2-3/4" Wedge Anchor - US Anchor Wedge Anchors. 50 pieces in the box.
• 3/8" x 6-1/2" Wedge Anchors - Generic Wedge Anchors. 19 pieces in the box. Zinc Plated.
• 3/8" x 6-1/2" Wedge Anchors - US Anchor Wedge Anchors. 50 in the box.
• 3/8" x 6-1/2" Wedge Anchors - US Anchor Wedge Anchors. 50 in the box.
• 3/8 x 3 Wedge Anchors - US Anchor Wedge Anchors. 37 in the box.
• 3/8 x 2-3/4 Wedge Anchor - Hodell Natco Wedge Anchors. 48 pieces in the box.
• 3/8 x 2-3/4 Wedge Anchors - Hodell Natco Wedge Anchors. 100 pieces in the box.
• 3/8 x 2-1/4 Wedge Anchors - US Anchor Wedge Anchors. 58 pieces in the box.
• Lot of 5 or 10 quick bolt 304 stainless 1/4" x 3-1/4" wedge anchor drop in - Stainless steel "Power-Stud" wedge anchor 1/4"-20 x 3-1/4" long. Made by Powers Fasteners.
• RAWL LOK/BOLT ANCHORS WITH ACORN NUT 1/4" X 1 3/8" box of 100 # 5150
• SIMPSON ANCHORING SYSTEMS SLEEVE-ALL ANCHORS 3/8" X 1 7/8" box of 50 SL37178C - MADE IN CANADA.
• Vintage Montgomery Ward Machine Screw setting tool - Vintage NOS Montgomery Ward Machine Screw setting tool. Still in original packaging. Please look closely at all photos before purchasing.
• Flat Mounted Disposable Roof Anchor RTZ8000 Zinc Plated Steel *2 PACK* - Condition is New.
• US ANCHOR DOUBLE EXPANSION SHIELD 5/16" X 1 1/4" 1 CASE = 10 boxes of 50 ea. - US ANCHOR, POMPANO BEACH, FL. 5/16" X 18 BOLT X 1 1/4" LONG.
• (100) Flat Head 1/4 x 3 Spike Hammer Drive anchors Mushroom Head carbon Steel
• Masonry Machine Screw Anchors in Zinc - Brick, Concrete, or Stone - 3/8" 16 - Masonry Machine Screw Anchors in Zinc - Brick, Concrete, or Stone - 3/8" 16 . Condition is New. Shipped with USPS Priority Mail Padded Flat Rate Envelope.
• Three (3) Red Head 1/2" x 5-1/2" Hot-Dipped Galvanized Steel Wedge Anchor - Were left over from a project.
• DFS/USA SLEEVE ANCHOR 3/8" X 1 7/8" w NUTS box of 50
• DFS/USA WEDGE ANCHOR 3/8" X 2 3/4" w NUTS box of 100 - WITH NUTS & WASHERS.
• wej-it AT3830 ANKR-TITE WEDGE ANCHOR 3/8" X 3" 2 boxes of 50 - Wej-it AT3830. ANKR-TITE WEDGE ANCHOR.
• LOT OF 50 L.H. Dottie W12334 1/2 x 3-3/4" Zinc Plated Full-Thread Wedge Anchors - THIS IS FOR A BOX OF 50 NEW THREADED WEDGE ANCHORS. Please look at the pictures for exact cosmetic condition or call us at 111 111 1111. We offer no-questions-asked 30 day returns.
• 4 boxes 400 diamond #12 x 1 Plastic Anchor Kits Drywall Wallboard Brick - 400 straight head screws and inserts. 48 states only.
• (27) M12x100 Shell Wedge Concrete Wedge Anchor Bolt - For sale 27 LOBO M12 x 100 Shell Wedge Concrete Wedge Anchor Bolt The hardness is 8.8. New, never used. Being sold as is. We only buy and use new boxes when we have no other choice. We believe the little things will help preserve our world for future generations.
• 3/8" x 5" Sleeve Anchor Phillips Flat Head Low Carbon Steel Zinc Plated - Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM. Material: Low Carbon Steel.
• 3/8" x 2 3/4" Sleeve Anchor Phil Flat Hd Low Carbon Steel Zinc Plated - Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. Material: Low Carbon Steel. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 1/4"-20 x 2 1/4" Coarse Thread Ultrawedge Wedge Anchor Zinc Plated - Fastener Type: Ultrawedge Wedge Anchor. Thread Pitch Type: Coarse. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 1/4"-20 x 2 1/4" Coarse Thread Wedge Anchor Low Carbon Steel Zinc Plated - Thread Pitch Type: Coarse. Fastener Type: Wedge Anchor. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• 1/4"-20 x 1 3/4" Coarse Thread Wedge Anchor Low Carbon Steel Zinc Plated - Thread Pitch Type: Coarse. Fastener Type: Wedge Anchor. Anchors are used for anchoring and securing objects into drywall, concrete or brick. Finish: Zinc Plated. PICTURES ARE REPRESENTATIVE OF ITEM, BUT ARE NOT OF THE ACTUAL ITEM.
• Red Head Turbolt Wedge Anchors 5/8" X 8 1/2" Set 3
• Red Head WS-5834 Trubolt Box Of 10 Concrete Wedge Anchor 5/8x3-1/2in - Red Head WS-5834 Trubolt. Box Of 10 Concrete Wedge Anchor 5/8x3-1/2in. New In Box- Never Used. USA Sales Only.
• Red Head Trubolt Wedge Anchors Ws-1270, 1/2" X 7" With Hardware **Box Of 14** - RED HEAD TRUBOLT WEDGE ANCHORS. BOX OF 14 . YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE. MODEL: WS-1270. MDF/#258/WB 4G/(1)CA BOX: REG A.
• Case Of 10 Red Head WS-5834 Trubolt Box Of 10 Concrete Wedge Anchor 5/8x3-1/2in - Red Head WS-5834 Trubolt. Box Of 10 Concrete Wedge Anchor 5/8x3-1/2in. Case Of 10. New In Box- Never Used.
• Associated Fasteners Inc. 1-8 x 6 Wedge Anchor 316 STN STL (NEW in BOX) - Lot of8 Stainless Steel Wedge Anchors. Assocaited Fasteners. With Nut and Washer. Baltimore and surrounding areas since 1996. But with our eyes now open we put a lot of effort in bringing you high end industrial and electrical parts as well.
• Powers Fasteners, 06942, 5/8" x 4" Power-Bolt (15/box), Skbawa-b522-mr - Powers Fasteners, 06942, 5/8" x 4" Power-Bolt (15/box). product is; New /Open box, box worn from storage/handling. Date: Month March 10, 2020/mr.
• 50 1/2"-13 X 3 3/4" Wedge Anchors, 304 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• Qty 33-Redhead ½” Dia. x 4-1/4” LG Wedge Expansion Concrete Anchor, Zinc Plated - ITW Red Head Trubolt 1/2" Diam, 1/2" Drill, 4-1/4" OAL, Wedge Expansion Concrete Anchor.
• (25) Sammys 1/4-20 x 2 Threaded Rod Hanger for Wood 8003957 - Lot of (25) Sammys / ITW Buildex number 8003957 threaded rod hangers. These fasteners are designed for use in wood and feature a 2" screw length with threads for 1/4-20 rod.
• 3/4"-10 X 5 1/4" Tie Lug Eye Bolt - Plain Finish - Lot Of 25 Pcs. - 3 1/4" Thread. 3/4" Bolt Hole.
• Marksman ThunderStud® Wedge Anchors 2 1/4" x 3/8" 316 SS Box of 100 Made in USA - Marksman ThunderStud® Wedge Anchors 2 1/4" x 3/8". The most basic difference between grade 304 and grade 316 stainless steels is that 316 tends to have more nickel and a bit of molybdenum in the mix.
• 80/20 Inc, 2906, 15 Series 1/2" x 3 3/4" Wedge Floor Anchor w/Hex Nut and Washer - Part Number: FBA_2906.
• (90) 5/8" X 5" Concrete Wedge Anchor With Washer & Hex Nut Zinc Plated - (90 Pieces) 5/8" X 5" Concrete Wedge Anchor With Flat Washer & Hex Nut / Zinc Plated. Assembled With Hex Nut & Flat Washer. Coating = Clear Zinc Plating. Material = Steel.
• (25) 5/8" X 5" Concrete Wedge Anchor With Washer & Hex Nut Zinc Plated - (25 Pieces) 5/8" X 5" Concrete Wedge Anchor With Flat Washer & Hex Nut / Zinc Plated. Assembled With Hex Nut & Flat Washer. Coating = Clear Zinc Plating. Material = Steel.
• 20Dd21 Concrete Anchor Bolts, 2" X 3/8Nc Studs, 2 Pouches Of 4 Count, New - CONCRETE ANCHOR BOLTS, 2" X 3/8NC STUDS, 2 POUCHES OF 4 COUNT, WITH WASHER / NUT, NEW. CONCRETE ANCHOR BOLTS, 2" X 3/8NC STUDS, 2 POUCHES OF 4 COUNT, WITH WASHER / NUT NEW P40350. ITEM CODE.
• 20 3/4"-10 X 4 3/4" Wedge Anchors Hot Dipped Galvanized - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• Worksmart 8pc Concrete Mounting Kit - 3/4" x 4" Bolts - Machinery Guard Accy - WORKSMART box of 8 PCS 3/4" x 4" Concrete Mounting Kit. Anchor Bolts Machinery Guard accy. Item(s) described above and exactly what's pictured.
• 20Dd03 Concrete Anchor Bolts, 2" X 3/8Nc Studs, 5 Count, With Washer / Nut, New - CONCRETE ANCHOR BOLTS, 2" X 3/8NC STUDS, 5 COUNT, WITH WASHER / NUT, NEW.
• 6 Wedge Anchor Expansion M10 Bolt - 6 Wedge Anchor Expansion M10 Bolt. Condition is New. Shipped with USPS First Class Package.
• Wej-It AT3830 Ankr-Tite Wedge Anchor 3/8" x 3" 50 Pcs - NEW SURPLUS--OPENED FACTORY BOX----11/19/LB.
• HILLMAN (150) Flat Head 1/4 x 3 Split Drive Anchors Concrete  Hammer-In - Condition is New.
• Part 370838,Hillman , Sleeve Anchors Anchor Diameter: 1/2 in. Anchor Length: 2-3 - Anchor Length: 2-3. Part Num 370838. Anchor Length: 2-3/4 in. Hillman Quality! Item Length: 3.3. ItemWeight: 1.7. ItemHeight: 4.3. ItemWidth: 2.6.
• Part 370838,Hillman , Sleeve Anchors Anchor Diameter: 1/2 in. Anchor Length: 2-3 - Anchor Length: 2-3. Part Num 370838. Anchor Length: 2-3/4 in. Hillman Quality! Item Length: 3.3. ItemWeight: 1.7. ItemHeight: 4.3. ItemWidth: 2.6.
• Simpson Strong-Tie WA50414 Wedge-All Wedge Anchor 1/2" x 4-1/4" 25 Pcs - NEW SURPLUS--OPENED FACTORY BOX----11/19/LB.
• Wej-It AT1242 Wedge Anchor 1/2" x 4-1/2" 25 Pcs - NEW SURPLUS--OPENED FACTORY BOX----11/19/LB.
• Fischer Fh Ii 24/50S High Performance Anchors, Pack Of 10
• Fischer Fh Ii 24/100B High Performance Anchors, Pack Of 5
• 50303 5/16" X 1-1/2" Steel/Zinc Hex Nut Sleeve Anchor -4lb Box - WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY. • Local pick up. If your item is received in a different condition than stated. • Freight, etc.
• Red Head TRUBOLT WS-1236 1/2" X 3-3/4" Wedge Anchor -NIB of 25 - Has a way to unload the pallet/item or if we need to arrange for a lift. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY. • Local pick up. If your item is received in a different condition than stated.
• Trubolt WS-1432 1/4" X 3-1/4" Steel Wedge Anchor; 1/4" Drill Size -NIB of 100 - Has a way to unload the pallet/item or if we need to arrange for a lift. WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY. If your item is received in a different condition than stated.
• Fischer FAZ 12/30 12mm Steel Bolt Anchor -NIB of 27 - WE ALSO ALLOW LOCAL PICK-UP AT OUR FACILITY. • Local pick up. has a way to unload the pallet/item or if we need to arrange for a lift. • Freight, etc.
• Powers Fastening 06952 3/4-Inch by 4-1/4" Powerbolt Carbon Steel~concrete1 Box
• (5) Concrete Bent Anchor Bolts 3/4-10 x 12" Hot Galvanized - These hot dip galvanized anchors are 3/4-10 thread and are 12" in length (inside bend) with a 4" thread length and 3" L (inside bend). Lot of (5) bent anchor bolts.
• Hilti 10x10 6.8/11 M Caliber Powder Actuated Fastener Cartridges, p/n 50352/4 - For Hilti DX 36M/350/450/DXA.
• (BOX OF 3) Trubolt concrete anchors stainless steel 1" x 9” WW-10090 - (BOX OF 3) Trubolt concrete anchors stainless steel 1" x 9” WW-10090. Condition is New.
• Brighton Best No. 157 Steel Zinc Wedge Anchors 3/8" - 16 X 3" 60 Pcs - Steel Zinc CR+3 RoHS Compliant -- Material Z35 -- NEW SURPLUS--NOT IN BOX---11/19/ WH.
• Powers Fasteners 7432Sd1 Power-Stud Seismic Anchors 5/8" X 4-1/2" 20 Pcs - NEW SURPLUS--OPENED FACTORY BOX----11/19/ WH.
• Powers 7423SD2 1/2" x 4-1/2" Power-Stud+ Wedge Anchor 50Pk - Powers 7423SD2 1/2" x 4-1/2" Power-Stud+ Wedge Anchor 50Pk. Condition is New. Shipped with USPS Priority Mail Small Flat Rate Box.
• New-Open Box of 10, SIMPSON STRONG-TIE WA62812 WEDGE-ALL ANCHORS 5/8" X 8-12"
• (2 Pack) Wej-It AT5850 5/8 X 5" Ankr-Tite Wedge Anchor Zinc Plated Carbon Steel
• NEW SIMPSON STRONG-TIE 1/2"-5/8" 1" HEAVY DUTY ANCHORS 3-1/2" 4-1/2" 5" 6" or 7" - Limited quantity, once these are gone we will be out. 1/4", 1/2", 5/8" or 3/4" x 2-1/4" 3-1/2", 4-1/2", 5 1/5", 6" or 7" Wedge-All Concrete Wedge Anchor Zinc Plated. One-piece, wrap-around clip ensures uniform holding capacity.
• 5 7/8"-9 X 8" Wedge Anchors Hot Dipped Galvanized - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• Box of 10: RED HEAD 1/2” x 3-3/4” Concrete Wedge Anchor Bolts - Sealed box.
• NEW 100+ Red Head RX-38 3/8" Shallow Drop In Concrete Anchor Lot In Box #0131909 - The lot is in excellent condition, new in their original box. Global Garage Sale's entire liability to you or any other third party under any circumstance is limited to the final sale price of any particular item.
• LOT of 150 NEW DeWalt Smart DI Drop in Anchor 100 3/8" 6306SD 50 1/2" 6306SD NR - The lot is in excellent condition, new in their original box. Global Garage Sale's entire liability to you or any other third party under any circumstance is limited to the final sale price of any particular item.
• 5/8 x 4-3/4 KBV Wedge Anchors
• 25 5/8"-11 X 7" Wedge Anchors, 304 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 100 3/8"-16 X 2 3/4" Wedge Anchors, 316 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 50 3/8"-16 X 5" Wedge Anchors, 316 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 10 3/4"-10 X 6 1/4" Wedge Anchors, 304 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 25 5/8"-11 X 5" Wedge Anchors, 304 Stainless Steel - WEDGE ANCHORS. 304 STAINLESS STEEL. DISCOVER CARD.
• 100 3/8"-16 X 3 3/4" Wedge Anchors, 316 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 10 3/4"-10 X 7" Wedge Anchors, 316 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 25 5/8"-11 X 5" Wedge Anchors, 316 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 50 3/8"-16 X 6 1/2" Wedge Anchors, 304 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 25 1/2"-13 X 8 1/2" Wedge Anchors, 304 Stainless Steel - WEDGE ANCHORS. 304 STAINLESS STEEL. DISCOVER CARD.
• 10 5/8"-11 X 12" Wedge Anchors, 304 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 5 7/8"-9 X 8" Wedge Anchors, 304 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 100 3/8"-16 X 3 3/4" Wedge Anchors 304 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 10 3/4"-10 X 8 1/2" Wedge Anchors, 304 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 25 1/2"-13 X 5 1/2" Wedge Anchors, 316 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 3/8"-16 X 3 1/2" Wedge Anchors Hot Dipped Galvanized 100 Pieces - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 50 1/2"-13 X 3 3/4" Wedge Anchors Hot Dipped Galvanized - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 5/8"-11 X 6" Wedge Anchors Hot Dipped Galvanized Concrete, Steel, Wood - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 25 1/2"-13 X 4 1/4" Wedge Anchors, 316 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 25 5/8"-11 X 6" Wedge Anchors, 304 Stainless Steel - WEDGE ANCHORS. 304 STAINLESS STEEL. DISCOVER CARD.
• 100 1/4"-20 X 1 3/4" Wedge Anchors, 316 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 25 pcs 5/8"-11 X 3 1/2" Wedge Anchors Hot Dipped Galvanized Concrete, Steel,Wood - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 100 1/4"-20 X 2 1/4" Wedge Anchors, 316 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 5 1"-8 X 9" Wedge Anchors, 304 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 20 3/4"-10 X 4 3/4" Wedge Anchors, 304 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 25 1/2"-13 X 7" Wedge Anchors, 316 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 25 1/2"-13 X 7" Wedge Anchors, 304 Stainless Steel - WEDGE ANCHORS. 304 STAINLESS STEEL. DISCOVER CARD.
• 25 5/8"-11 X 5" Wedge Anchors Hot Dipped Galvanized - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 10 3/4"-10 X 10" Wedge Anchors, 304 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 25 5/8"-11 X 6" Wedge Anchors, 316 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 25 pcs 1/2"-13 X 7" Wedge Anchors Hot Dipped Galvanized Concrete, Steel, Wood - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 10 3/4"-10 X 8 1/2" Wedge Anchors, 316 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 50 1/2"-13 X 2 3/4" Wedge Anchors, 316 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 5 pcs 7/8-9 x 6" Wedge Anchors, Hot Dipped Galvanized Concrete, Steel, Wood - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 25 5/8"-11 X 8 1/2" Wedge Anchors, 316 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 20 3/4"-10 X 5 1/2" Wedge Anchors, 304 Stainless Steel - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• 25 pcs 1/2"-13 X 8 1/2" Wedge Anchors Hot Dipped Galvanized Concrete, Steel,Wood - Our Wedge Anchors are used for heavy duty fastening applications with impressive performance characteristics. The advanced design of the collar reduces anchor spinning. Proper installation requires cleaning out the hole.
• Red Head Heavy Duty Wedge Anchor 3/8 X 3 3/4 Stainless Steel, (2 pcs) - Red Head Wedge Anchor 3/8 X 3 3/4 Stainless steel，12pk， WW-3836. Condition is New. Washers and Nuts not included.
• (Qty. 14) 3/4" - 10 Red Head Anchor Bolts 6 1/4" Long - (Qty. 14) 3/4" - 10 Red Head Anchor Bolts 6 1/4" Long. These are old stock that have been sitting on the shelf. Shipped with USPS Priority Mail.
• Hilti Metal Hit Anchors 1/4" X 1 1/2" *Box Of 100* - The photos that are provided are a representation, of the item. The color of the photo may vary from the actual product due to translation and reproduction limitations of photography.
• Hilti 371805 HSL-3-G Wedge Expansion Anchor Size M20/30 2-Pk ! NOP !
• Hilti 371805 HSL-3-G Wedge Expansion Anchor Size M20/30 Lot of 2 ! WOW !
• Flat Head Wire Nails 7/8-18 Anchor Nail-In 1-4 Lb Net - Condition is New.
• 3/4" x 6" Wedge Anchor Bolt Lot of 22 - For security purposes, all of our parts are sealed and or marked so that they can be identified. Location: KW2.
• concrete anchors,etc. assortment
• 30 wej-it z1232 Wedge Anchor Bolts 1.5x3.5” 12.7mm X 88.9mm 31414 Wejit
• Red Head Concrete Anchors 3/8'' X 4'' - DYNABOLT CNCRT SLVE ANCHR-3/8X4" FLAT HD ZP.
• wej-it Fastening Systems Wedge Anchor Item Z1430 1/4 x 3" (box of 22)
• (15) 5/8" X 7" Concrete Wedge Anchor With Washer & Hex Nut Zinc Plated - (15 Pieces) 5/8" X 7" Concrete Wedge Anchor With Flat Washer & Hex Nut / Zinc Plated. Assembled With Hex Nut & Flat Washer. Coating = Clear Zinc Plating. Material = Steel.
• (60) 5/8" X 7" Concrete Wedge Anchor With Washer & Hex Nut Zinc Plated - (60 Pieces) 5/8" X 7" Concrete Wedge Anchor With Flat Washer & Hex Nut / Zinc Plated. Assembled With Hex Nut & Flat Washer. Coating = Clear Zinc Plating. Material = Steel.
• 23 Pieces Concrete Wedge Anchor Bolts 1/4” x 3” Includes Nuts & Washers - 23 Pieces Concrete Wedge Anchor Bolts 1/4” x 3” Includes Nuts & Washers. Shipped with USPS Priority Mail.
• Easy Anchor EZAC 37238 3/8" x 2 3/8" (Box of 48)
• (25) 3/8" x 5" Flat Head Phillips Concrete Sleeve Anchors Zinc Plated - NEW - Multiple sets available.
• Machine Screw Anchor with Setting Tool Bundle Masonry Concrete - Pick Size/QTY - Machine screw anchors feature a zinc coned portion at the end of a lead sleeve that is pulled up, expanding the sleeve, as a screw or bolt is tightened into the internal threads of the anchor. To install a machine screw anchor properly, first a hole must be drilled into the masonry material.
• Machine Screw Masonry Anchor Setting Tool Concrete, Brick, Block - Pick Size/QTY - These set tools are used to properly install machine screw anchors into masonry materials such as brick, concrete or stone. To install a machine screw anchor, you must first drill a pilot hole into the masonry material.
• 3/8" x 4" Titen HD Heavy Duty Screw Anchor 304 Stainless Steel ~ THD374000H4SS - It is the ultimate choice to provide fast and efficient installation, combined with long-lasting corrosion resistance for an unsurpassed peace-of-mind. With the introduction of the THDSS, there is a state-of-the-art anchor solution that combines the corrosion resistance of Type 300 Series stainless steel with the undercutting ability of heat-treated carbon-steel cutting threads.
• 3/8" x 3" Titen HD Heavy Duty Screw Anchor 304 Stainless Steel ~ THD373000H4SS - It is the ultimate choice to provide fast and efficient installation, combined with long-lasting corrosion resistance for an unsurpassed peace-of-mind. With the introduction of the THDSS, there is a state-of-the-art anchor solution that combines the corrosion resistance of Type 300 Series stainless steel with the undercutting ability of heat-treated carbon-steel cutting threads.
• 8 HILTI 4 1/2" Drop-In 1/4 " Anchors for Direct Fastening
• 5 HILTI 4 1/2" Drop-In 1/4 " Anchors for Direct Fastening
• 7 HILTI 6" Drop-In 1/2" Anchors for Direct Fastening
• 7 HILTI 6" Drop-In 1/2" Anchors for Direct Fastening
• Lot of 18 - Caddy 370A Single Concrete Insert Plate & Rod - Catalog # 370A0050PL - Catalog # 370A0050PL. Lot of 18 - Caddy 307A Single Concrete Insert Plate & Rod.
• Double Expansion Anchors for Masonry, Concrete, Brick or Block Zamac Zinc Alloy - Double Expansion Masonry Anchors - Zamac Zinc Alloy. Grade/Material: Zamac Zinc Alloy. Zamac Zinc Alloy Concrete Anchors for Masonry Screws or Bolts. Zamac Zinc Alloy. Fastener Type: Double Expansion Masonry Anchor.
• (100) 3/4"-10 X 6-1/4" Concrete Wedge Anchor With Washer & Hex Nut Zinc Plated - (100 Pieces) 3/4"-10 X 6-1/4" Concrete Wedge Anchor With Flat Washer & Hex Nut / Zinc Plated. Assembled With Hex Nut & Flat Washer. Coating = Clear Zinc Plating. Material = Steel.
• (20) 3/4"-10 X 6-1/4" Concrete Wedge Anchor With Washer & Hex Nut Zinc Plated - (20 Pieces) 3/4"-10 X 6-1/4" Concrete Wedge Anchor With Flat Washer & Hex Nut / Zinc Plated. Assembled With Hex Nut & Flat Washer. Coating = Clear Zinc Plating. Material = Steel.
• (10) 3/4"-10 X 6-1/4" Concrete Wedge Anchor With Washer & Hex Nut Zinc Plated - (10 Pieces) 3/4"-10 X 6-1/4" Concrete Wedge Anchor With Flat Washer & Hex Nut / Zinc Plated. Assembled With Hex Nut & Flat Washer. Coating = Clear Zinc Plating. Material = Steel. Drill Size = 3/4".
• Lot of 10 Red Head Wedge Anchor 1/2 in. x 7 in - 50098 - Lot of 10 Red Head Wedge Anchor 1/2 in. Exceptions to this can be made based on certain circumstances. We dedicated to making your buying experience as smooth and satisfactory as possible.
• 1" X 6" Concrete Wedge Anchor Bolts Lot Of Two - See pictures above for more detail!
• NEW PACK OF 2, HILTI/ HSL-3 M20/60, Heavy Duty Expansion Anchor BEST PRICE
• (25) Powers 7433USA Power Stud Wedge Expansion Anchors 5/8" X 5" NEW!!! In Box - You are getting (25) Powers 7433USA Power Stud Wedge Expansion Anchors 5/8" X 5" NEW! in factory Box.
• (3) Powers 7652USA "316 Stainless" Wedge Expansion Anchors 7/8" X 8" NEW!!! - You are getting (3) Powers 7652USA "316 Stainless" Wedge Expansion Anchors 7/8" X 8" NEW! in factory Box.
• (10) Powers 7652USA "316 Stainless" Wedge Expansion Anchors 7/8" X 8" NEW!!! - You are getting (10) Powers 7652USA "316 Stainless" Wedge Expansion Anchors 7/8" X 8" NEW! in factory Box. We will break up the box if needed.
• (25) Powers 7426USA Power Stud Wedge Expansion Anchors 1/2" X 7" NEW!!! in Box - You are getting (25) Powers 7426USA Power Stud Wedge Expansion Anchors 1/2" X 7" NEW!
• (100) Powers Vertigo 07169 Self Drilling Anchors 3/8" X 4" NEW!!! in Box - You are getting a box of (100) Powers Vertigo 07169 Self Drilling Anchors 3/8" X 4" NEW!
• (20) Powers 07282 Wedge Bolt Anchors 3/4" X 4" NEW!!! in Box - You are getting a box of (20) Powers 07282 Wedge Bolt Anchors 3/4" X 4" NEW!
• DeWalt DWA5537DS Adj. Depth Setter for 1/4"-3/8"-1/2" Anchors With Dust Control
• Powers Fasteners Power-Stud 5/8" x 4-1/2" Seismic Anchor, set of 25 - Up for sale is a set of Powers Fasteners Power-Stud 5/8" x 4-1/2" Seismic Anchor, 25 total.
• (50) 1/2"-13 X 3-3/4" Concrete Wedge Anchor With Washer & Hex Nut Galvanized - (50 Pieces) 1/2"-13 X 3-3/4" Concrete Wedge Anchor With Flat Washer & Hex Nut / Hot Dipped Galvanized. Coating = Hot Dipped Galvanized. Assembled With Hex Nut & Flat Washer. Material = Steel.
• (25) 1/2"-13 X 3-3/4" Concrete Wedge Anchor With Washer & Hex Nut Galvanized - (25 Pieces) 1/2"-13 X 3-3/4" Concrete Wedge Anchor With Flat Washer & Hex Nut / Hot Dipped Galvanized. Coating = Hot Dipped Galvanized. Assembled With Hex Nut & Flat Washer. Material = Steel.
• Wej-It Ankr-TITE Wedge Anchors, 5/8"x 5", Carbon Steel, AT5850, Box of 10
• 1 Box (25) Wej-It Wedge Anchors 1/2" x 5" - 1 Box (25) Wej-It Wedge Anchors 1/2" x 5". Shipped with Standard Shipping. New old stock.
• Red Head 1/2 in. x 7 in. Wedge Anchor - Your issues will be solved quickly and positively.
• Red Head 5-1/2in. x 3/4 in. Wedge Anchor - Your issues will be solved quickly and positively.
• Red Head 5-1/2in. x 1/2 in. Wedge Anchor (1 pc.) - Your issues will be solved quickly and positively.
• Allied Bolt 343 3/16" X 1-1/4" B STEEL ANCHOR NEW Concrete Screw. Qty 100/box - Allied Bolt 343 3/16" X 1-1/4" B STEEL ANCHOR NEW Concrete Screw. Qty 100/box. Shipped with UPS. Can not ship to Puerto Rico or other surrounding islands.  Can not ship to Alaska or Hawaii
• 1 Box 121 Wej-It concrete sleeve anchors 3/8" Washers Nuts - This is for 121 concrete anchors 2 1/4" X 3/8", with washers and nuts.
• (2) MKT Fastening Steel Wedge Anchor 2511490, 1-1/4" x 9", Grade 5, Sup-R-Stud - Wedge Anchor. Fastener Finish: Zinc Plated. Anchor Material: Steel. Anchor Length: 9". Material Grade: Grade 5. Maximum Work Thickness: 1-1/4".
• Wej-It AT5850, 5/8" x 5" Ankr-Tite Wedge Anchor,Zinc Plated,(Box 10) - P/N AT5850. Type: 5/8" x 5" Ankr-Tite Wedge Anchor,Zinc Plated,(Box 10).
• Qty24 Nova Fasteners Nfq726Irt2R 5" Wedge 5/8"Anchors 3Rohs Concrete Wedge Zinc - Se Habla Español.
• Redhead WS-3454 Trubolt Concrete Wedge Anchor 3/4" x 5-1/2" Box of 6
• Redhead WS-5850 Trubolt Concrete Wedge Anchor 5/8" x 5" Box of 10
• (100) 3/8"-16 X 3-3/4" Concrete Wedge Anchor With Washer & Hex Nut Zinc Plated - (100 Pieces) 3/8"-16 X 3-3/4" Concrete Wedge Anchor With Flat Washer & Hex Nut / Zinc Plated. Assembled With Hex Nut & Flat Washer. Coating = Clear Zinc Plating. Material = Steel.
• (50) 3/8"-16 X 3-3/4" Concrete Wedge Anchor With Washer & Hex Nut Zinc Plated - (50 Pieces) 3/8"-16 X 3-3/4" Concrete Wedge Anchor With Flat Washer & Hex Nut / Zinc Plated. Assembled With Hex Nut & Flat Washer. Coating = Clear Zinc Plating. Material = Steel.
• Part 370834,Hillman , Sleeve Anchors Anchor Diameter: 3/8 in. Anchor Length: 2-1 - Anchor Length: 2-1. Part Num 370834. Anchor Length: 2-1/4 in. Weight Capacity: 1145 lb. Concrete/290 lb. Block/400 lb, Slv Anc Rawl 3/8 X 2-1/4. Hillman Quality! Item Length: 3.3.
• (10) Concrete Bent Anchor Bolts 5/8-11 x 12 Hot Galvanized - These hot dip galvanized anchors are 5/8-11 thread and are 12" in length (inside bend) with a 4" thread length and 2" L (inside bend). Lot of (10) bent anchor bolts.
• 1"-8 x 6" Wedge Anchors Zinc Plated Steel Concrete Masonry Expansion Anchors - Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. The majority of the wedge anchor remains embedded in the solid masonry material being fastened to. Wedge Anchors include Nuts and Washers.
• 3/4"-10 Wedge Anchors Zinc Plated Steel Concrete Masonry Expansion Anchors - Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. The majority of the wedge anchor remains embedded in the solid masonry material being fastened to. Wedge Anchors include Nuts and Washers.
• 5/8"-11 Wedge Anchors Zinc Plated Steel Concrete Masonry Expansion Anchors - Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. The majority of the wedge anchor remains embedded in the solid masonry material being fastened to. Wedge Anchors include Nuts and Washers.
• 1/2"-13 Wedge Anchors Zinc Plated Steel Concrete Masonry Expansion Anchors - Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. The majority of the wedge anchor remains embedded in the solid masonry material being fastened to. Wedge Anchors include Nuts and Washers.
• 3/8"-16 Wedge Anchors Zinc Plated Steel Concrete Masonry Expansion Anchors - Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. The majority of the wedge anchor remains embedded in the solid masonry material being fastened to. Wedge Anchors include Nuts and Washers.
• 1/4-20 Wedge Anchors Zinc Plated Steel Concrete Masonry Expansion Anchors - Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. The majority of the wedge anchor remains embedded in the solid masonry material being fastened to. Wedge Anchors include Nuts and Washers.
• 3/4"-10 Wedge Anchors 316 Stainless Steel Concrete Masonry Expansion Anchors - Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. The majority of the wedge anchor remains embedded in the solid masonry material being fastened to. Stainless Steel Wedge Anchors are used on oil rigs, docks, piers, walls or slabs.
• 5/8"-11 Wedge Anchors 316 Stainless Steel Concrete Masonry Expansion Anchors - Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. The majority of the wedge anchor remains embedded in the solid masonry material being fastened to. Stainless Steel Wedge Anchors are used on oil rigs, docks, piers, walls or slabs.
• 1/2"-13 Wedge Anchors 316 Stainless Steel Concrete Masonry Expansion Anchors - Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. The majority of the wedge anchor remains embedded in the solid masonry material being fastened to. Stainless Steel Wedge Anchors are used on oil rigs, docks, piers, walls or slabs.
• 3/8"-16 Wedge Anchors 316 Stainless Steel Concrete Masonry Expansion Anchors - Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. The majority of the wedge anchor remains embedded in the solid masonry material being fastened to. Stainless Steel Wedge Anchors are used on oil rigs, docks, piers, walls or slabs.
• 1/4-20 Wedge Anchors 316 Stainless Steel Concrete Masonry Expansion Anchors - Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. The majority of the wedge anchor remains embedded in the solid masonry material being fastened to. Stainless Steel Wedge Anchors are used on oil rigs, docks, piers, walls or slabs.
• 7/8"-9 Wedge Anchors Hot Dip Galvanize Steel Concrete Masonry Expansion Anchors - 7/8"-9 Hot Dip Galvanize Steel Wedge Anchors Concrete Masonry Expansion Anchors. Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. Wedge Anchors include Nuts and Washers.
• 3/4"-10 Wedge Anchors Hot Dip Galvanize Steel Concrete Masonry Expansion Anchors - 3/4"-10 Hot Dip Galvanize Steel Wedge Anchors Concrete Masonry Expansion Anchors. Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. Wedge Anchors include Nuts and Washers.
• 5/8"-11 Wedge Anchors Hot Dip Galvanize Steel Concrete Masonry Expansion Anchors - 5/8"-11 Hot Dip Galvanize Steel Wedge Anchors Concrete Masonry Expansion Anchors. Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. Wedge Anchors include Nuts and Washers.
• 1/2"-13 Wedge Anchors Hot Dip Galvanize Steel Concrete Masonry Expansion Anchors - 1/2"-13 Hot Dip Galvanize Steel Wedge Anchors Concrete Masonry Expansion Anchors. Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. Wedge Anchors include Nuts and Washers.
• 3/4" x 5.5" concrete masonry wedge anchor stud & nut, 16 pcs, with shim washers - X 5.5" long (overall) concrete masonry wedge anchor stud & nut, 16 pcs, with shim washers. New, never used. 1/2 price here.
• (20) 3/4"-10 X 5-1/2" Concrete Wedge Anchor With Washer & Hex Nut Zinc Plated - (20 Pieces) 3/4"-10 X 5-1/2" Concrete Wedge Anchor With Flat Washer & Hex Nut / Zinc Plated. Assembled With Hex Nut & Flat Washer. Coating = Clear Zinc Plating. Material = Steel.
• (10) 3/4"-10 X 5-1/2" Concrete Wedge Anchor With Washer & Hex Nut Zinc Plated - (10 Pieces) 3/4"-10 X 5-1/2" Concrete Wedge Anchor With Flat Washer & Hex Nut / Zinc Plated. Assembled With Hex Nut & Flat Washer. Coating = Clear Zinc Plating. Material = Steel. Drill Size = 3/4".
• 5/8-11 Wedge Anchors Stainless Steel Concrete Masonry Expansion Anchors - Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. The majority of the wedge anchor remains embedded in the solid masonry material being fastened to. Stainless Steel Wedge Anchors are used on oil rigs, docks, piers, walls or slabs.
• Wedge Anchors 304 Stainless Steel Concrete Masonry Expansion Anchors - 1/2"-13 - Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. The majority of the wedge anchor remains embedded in the solid masonry material being fastened to. Stainless Steel Wedge Anchors are used on oil rigs, docks, piers, walls or slabs.
• Wedge Anchors 304 Stainless Steel Concrete Masonry Expansion Anchors - 3/8"-16 - Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. The majority of the wedge anchor remains embedded in the solid masonry material being fastened to. Stainless Steel Wedge Anchors are used on oil rigs, docks, piers, walls or slabs.
• Lot of 12 NEW Red Head 11285 Sleeve Anchor 1/2'' x 4'' Hex - They are new, just the box is open and beat up. I bought the box which originally had qty of 25. I used 13 so 12 left.
• 1 each WA62700 5/8 x 7 Wedge-All Wedge Anchor + nut washer SIMPSON STRONG-TIE - Part# WA62700. The Wedge-All® wedge anchors are a non-bottom bearing, wedge-style expansion anchor for use in solid concrete or grout-filled concrete masonry. A one-piece clip ensures uniform holding capacity that increases as tension is applied.
• 5/8 X 3-3/4 wedge anchor (15pcs) Zinc
• red head WS-3850 3/8" x 5" Red Head Trubolt Anchor Zinc Plated ~ 32 ct - Zinc plated for indoor use. Thread Length 3-3/4". these are new but not a complete box- you are getting 32 count -.
• 1/4-20 Wedge Anchors 304 Stainless Steel Concrete Masonry Expansion Anchors - Wedge Anchors are installed into drilled holes, most often in concrete or other masonry materials. The majority of the wedge anchor remains embedded in the solid masonry material being fastened to. Stainless Steel Wedge Anchors are used on oil rigs, docks, piers, walls or slabs.
• Hilti 1/2 X 4-1/2 Wedge Anchor 387513 Per Each - NEW HILTI 1/2" X 4-1/2" WEDGE ANCHOR. THIS IS PER EACH ANCHOR. PART #: 387513.
• Hilti 1/2 X 3-3/4 Wedge Anchor 387512 Per Each - NEW HILTI 1/2" X 3-3/4" WEDGE ANCHOR. THIS IS PER EACH ANCHOR. PART #: 387512.
• Qty (8) Wej-It 3/4” X 4 Concrete Anchors, 3440 - (prma) New. Qty (8) Wej-It 3/4” X 4 Concrete Anchors.
• Part 370836,Hillman , Sleeve Anchors Anchor Diameter: 3/8 in. Anchor Length: 3-1 - Anch