100
12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY$65.00 Buy It Now or Best Offer
2Pcs 40X40mm Thermoelectric Generator SP1848-27145 Peltier TEG Module N5G2
$10.10 Buy It Now
Water Cooling System Kits 4-Chip Refrigeration Thermoelectric Peltier Cooler DIY$38.00 Buy It Now
288W Thermoelectric Peltier Refrigeration Cooler DC12V Semiconductor Air CondiT1
$49.19 Buy It Now
TEC1-19905 Semiconductor Electronic Cooling Chip 24V Electronic Cooling B3O5
$12.96 Buy It Now
12V 60W CompleteCooling Kit Electric Refrigeration Semiconductor Cooler Mod V1V5
$17.85 Buy It Now
Thermoelectric Peltier Cooler Refrigeration DC 12V Semiconductor Air Condit Y1X1
$21.16 Buy It Now
Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 40*40mm TEC1-12712
$5.09 Buy It Now or Best Offer
40x40mm Heatsink Thermoelectric Cooler Peltier Plate Elemente Module TEC1-12705
$3.95 Buy It Now or Best Offer
288W Thermoelectric Peltier Refrigeration Cooler DC12V Semiconductor Air CondiV4
$48.99 Buy It Now
12V 140W Thermoelectric Peltier Refrigeration Cooling System Double Cooler Fan$25.00$23.75 Buy It Now
DIY Thermoelectric Cooler Cooling System Semiconductor Refrigeration System KiT8
$21.88 Buy It Now
12V Semiconductor Refrigeration Cooler DIY Peltier Module Cooling Fan 210W$30.00 Buy It Now
Electric Semiconductor Cooling Fan Refrigeration Plate Cooler High Quality 12 V$50.00$47.50 Buy It Now or Best Offer
DIY Semiconductor Cooling Fan Refrigeration Thermoelectric Peltier Cooler 210 W$35.00$33.25 Buy It Now
288W Thermoelectric Peltier Refrigeration Cooler DC12V Semiconductor Air CondiD6
$47.99 Buy It Now
4 Chip Refrigeration Kit Thermoelectric Peltier Water Cooling Decive Plate+fan
$38.00 Buy It Now
1pcs DIY 120W TEC Peltier Semiconductor Refrigerator Water Cooling Air Conditioner X8M6
$35.38 Buy It Now
2X DC 5V 19.4W Thermoelectric Cooler Peltier Cooler Cooling X8X2
$11.07 Buy It Now
8 Chip TEC1-12706 Thermoelectric Peltier 576W Cooler Air Cooling Device DIY 12V$51.00 0 Bids 4d 17h
100W TEC1-12709 Thermoelectric Cooler Peltier 12V Q2X6h
$8.99 Buy It Now
288W Thermoelectric Peltier Refrigeration Cooler DC12V Semiconductor Air Con
$70.01 Buy It Now
Laird Tech Cascade Series Thermoelectric Cooler Assembly *Tested*
$220.00 Buy It Now or Best Offer
Thermoelectric Cooler, Thermoelectric Cooler, Asixx DIY Thermoelectric Peltier
$63.20 Buy It Now
Replacement for TES1-4902 6V Heatsink Thermoelectric Peltier CooleR
$8.59 Buy It Now
1 watcher4Pcs Thermoelectric Cooling Peltier Plate 6V Replacement for TES1-4902
$18.10 Buy It Now
TEC1-19906 DC24V Heatsink Thermoelectric Peltier Cooler Plate Module
$13.30 Buy It Now
TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Eleme H4Q7
$5.32 Buy It Now
5 Pcs Thermoelectric Cooler 12V 30A White Replacement for TEC1-12730
$109.27 Buy It Now
1 Set Air Conditioner DIY Kit Thermoelectric Peltier Cooler Refrigeration CooW5
$13.79 Buy It Now
288W Thermoelectric Peltier Refrigeration Cooler DC12V Semiconductor Air CondiA9
$47.99 Buy It Now
1 Set Air Conditioner DIY Kit Thermoelectric Peltier Cooler Refrigeration CooZ8
$13.95 Buy It Now
288W Thermoelectric Peltier Refrigeration Cooler DC12V Semiconductor Air CondiW3
$48.99 Buy It Now
1 Set Air Conditioner DIY Kit Thermoelectric Peltier Cooler Refrigeration CooF4
$13.79 Buy It Now
288W Thermoelectric Peltier Refrigeration Cooler DC12V Semiconductor Air CondiY7
$47.99 Buy It Now
Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat F4W6
$22.51 Buy It Now
1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor N5Z9
$37.53 Buy It Now
2PCS TEC1-12706 Thermoelectric Peltier Cooler 12V 6A 60W TEC1 12706
$15.50 Buy It Now
3pcs TEC1-12705 Semiconductor Refrigeration Tablets TEC1-12705 12V 5A Heatsin...
$18.40 Buy It Now
12V Cooling Semiconductor 72W Refrigeration System Air Conditioning Cooling W3T8
$23.14 Buy It Now
300W Thermoelectric Peltier Refrigeration Cooler DC12V Semiconductor Air Co I8D6
$58.19 Buy It Now
3X(DIY Kit TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling Systeh
$43.64 Buy It Now
Thermoelectric Peltier Refrigeration Cooler DC12V 30A Semiconductor Air Con A2W4
$39.67 Buy It Now
Thermoelectric Peltier Cooler Refrigeration DC 12V Semiconductor Air Condit M9D1
$19.17 Buy It Now
12V 60W CompleteCooling Kit Electric Refrigeration Semiconductor Cooler Mod R5K2
$16.51 Buy It Now
12V 6A Thermoelectric Peltier Semiconductor Cooler Refrigeration Cooling SysteW5
$28.99 Buy It Now
DIY Thermoelectric Cooler Cooling System Semiconductor Refrigeration System KiR2
$21.99 Buy It Now
1x288W Thermoelectric Peltier Refrigeration Cooler DC12V Semiconductor Aluminum
$67.91$59.76 Buy It Now
1Pcs DC12V Semiconductor Fridge/Refrigeration Cooling System DIY Kit Mini
$23.33 Buy It Now or Best Offer
TEC1-12703 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module
$2.44 Buy It Now or Best Offer
Refrigeration Plate Cooler Semiconductor Peltier Cold Cooling Fan 240W Durable$50.00$47.50 Buy It Now or Best Offer
TEC1-12706 12V 6A 40X40MM Heatsink Thermoelectric Cooler Peltier Plate Module
$31.95 Buy It Now
Thermo Electric PA41806-JX Connector Panel PA41806JX
$77.44 Buy It Now
288W-Thermoelectric Peltier Refrigeration Cooler DC12V Semiconductor Air-Tools
$70.01$63.01 Buy It Now
576W 12V 8-Chip Thermoelectric Peltier Cooler Air Cooling DIY For Refrigeration$65.00$61.75 Buy It Now or Best Offer
DIY Electric Cooler Cooling System Semiconductor Cooling System Kit Cooling Cooler Y1V1
$23.59 Buy It Now
12V 6A Electric Peltier Half Conductor Cooler Cooler System Kit Kue P4B8
$27.81 Buy It Now
1pcs DIY 120W TEC Peltier Semiconductor Refrigerator Water Cooling Air Conditioner C3D1
$35.38 Buy It Now
Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Kü D7J2
$22.51 Buy It Now
TEC1-12704 Thermoelectric Cooler Peltier 30mmx30mm TEC1 12704 Elements Modu T1M9
$9.15 Buy It Now
TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier ElementsN3K2
$5.28 Buy It Now
DIY Electric Cooler Cooling System Semiconductor Cooling System Kit Cooling Cooler T6P8
$23.30 Buy It Now
Car Battery Charger with LCD Touch Screen Display Repair Charger, EU-St R4B9
$27.88 Buy It Now
Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat T5M1
$23.57 Buy It Now
12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit$25.00 Buy It Now or Best Offer
TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier ElementsU3I7
$5.28 Buy It Now
DC 5Vue9.4W Thermoelectric Cooler Peltier Cooler Cooling U7H3
$5.86 Buy It Now
2x DIY Electric Cooler Cooling System Semiconductor Cooling System Kit Cooling P9L1
$38.60 Buy It Now
1Set 12V Thermoelectric Peltier Cooler Refrigeration Cooling Fan System Heatsin
$19.12 Buy It Now
Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Double Fan DIY12V$25.01$23.76 Buy It Now
1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor Y8U5
$37.53 Buy It Now
Refrigeration Thermoelectric Module Peltier Air CoolerFan Cooling System DIY Set$32.00$30.40 Buy It Now or Best Offer
12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit New$25.00 Buy It Now
576W Thermoelectric Peltier Cooler 8Chip TEC1-12706 DIY Air Cooler Device 12V$59.01$56.06 Buy It Now or Best Offer
1pcs 288W Thermoelectric Peltier Cooling Cooler DC12V Semiconductor Aluminum
$63.24 Buy It Now or Best Offer
1 watcher Thermoelectric Peltier Refrigeration Air Cooling System Kits Cooler Fan 12V 4-6A$32.00$30.40 Buy It Now or Best Offer
DC 5Vue9.4W Thermoelectric Cooler Peltier Cooler Cooling S8O3
$5.94 Buy It Now
Gump's grocery TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Plate
$22.76 Buy It Now
Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan 240w$47.50 Buy It Now or Best Offer
3pcs TEC1-12705 Semiconductor Refrigeration Tablets TEC1-12705 12V 5A Heatsin...
$17.94 Buy It Now
12V 6A Thermoelectric Peltier Refrigeration Cooling System DIY Kit Cooler I2M9
$19.77 Buy It Now or Best Offer
12V 140W Peltier Cooler Semiconductor Refrigeration Cooling Fan DIY Dehumidifier$25.02$23.77 Buy It Now or Best Offer
1 watcher Semiconductor Refrigeration Cooler DIY Peltier Module Cooling Fan 12Volt 210Watt$30.00$28.50 Buy It Now
240W Semiconductor Cooler with Fan Thermoelectric Peltier Cold Plate US$50.00 Buy It Now or Best Offer
1 Set Air Conditioner DIY Kit Thermoelectric Peltier Cooler Refrigeration CooN2
$51.99 Buy It Now
288W Thermoelectric Peltier Refrigeration Cooler DC12V Semiconductor Air CondiQ7
$41.99 Buy It Now
12V 6A Thermoelectric Peltier Semiconductor Cooler Refrigeration Cooling SysteL8
$29.99 Buy It Now
DIY Thermoelectric Cooler Cooling System Semiconductor Refrigeration System KiJ7
$25.99 Buy It Now
8-Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device 12V 576W New$64.99$61.74 Buy It Now or Best Offer
DIY kits Thermoelectric Peltier Refrigeration Cooling System Water cooling+ faW7
$24.79 Buy It Now
Peltier Cooler Semiconductor Air Cooling Refrigeration Cooling System Cooler Fan$35.00$33.25 Buy It Now
DIY Kit TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling System 6Z5
$58.99 Buy It Now- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit New$25.00 Buy It Now or Best Offer
144W Thermoelectric Peltier Refrigeration Cooler 12V Semiconductor Air Cond M2G6
$24.46 Buy It Now
12V 240W DIY Thermoelectric Cooler Peltier Refrigeration Cooling System Fan Kit$60.00$57.00 Buy It Now or Best Offer
Refrigeration Peltier Air Cooling System Cooler Semiconductor Peltier Cooler$35.00$33.25 Buy It Now
144W Thermoelectric Peltier Refrigeration Cooler 12V Semiconductor Air Cond X1P1
$27.11 Buy It Now
144W Thermoelectric Peltier Refrigeration Cooler 12V Semiconductor Air Cond F6T1
$27.11 Buy It Now
Thermoelectric Cooler Peltier 240W DIY Refrigeration Cooling System Fan 20A 12V$60.00$57.00 Buy It Now or Best Offer
8-Chip TEC1-12706A DIY Thermoelectric Peltier Cooler Air Cooling Device 12V 576W$65.00$61.75 Buy It Now or Best Offer
- 576W Thermoelectric Peltier Cooler Air Cooling DIY 8-Chip 12V For Refrigeration - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse.
- Peltier Thermoelectric Cooler DC12V 30A Semiconductor Air Conditioning Cooling System X8E6 - Strom: 30A. Farbe:Wie abgebildet. Kühlleistung: 170W.
- 240w Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Elements U7N1 - 1 x Thermoelectric Cooler Peltier. Size: 40 x 40 x 3.8mm. Material: semiconductor. Colour: white.
- 2X 12V 5.8A 65W TEC1-12706 Thermoelectric Cooler Cooling Peltier Plate ModulE2D2 - 2X 12706 Thermoelectric Cooler. QMax (W) : 65W. Cooling piece is very simple to install and use. Size: 40mm x 40mm x 3.8mm. Material: Ceramic. Color : White. Net weight : 22g. Power Cord : 300mm.
- 12V Thermoelectric Refrigeration Cooling System 3 Peltier Semiconductor Cooler - (12V 240W Dual-Chip Semiconductor Refrigeration Cooler DIY Radiator Cooling Device. DIY Semiconductor Surface Cooling Version. 1 DIY Semiconductor Surface Cooling Version. 3) It adoptsDual-chip Cooling.
- 576W Thermoelectric Peltier Cooler Air Cooling DIY 8-Chip 12V For Refrigeration - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- for 12V Semiconductor Air cooling Device Radiator with Fan Thermoelectric Coo - Semiconductor coolers are a form of cooling that combines semiconductor technology and electronic assembly technology. Suitable for small space cooling, air cooling dehumidification, semiconductor refrigeration learning for, etc.
- 4X(288W Thermoelectric Peltier Cooler Dc12V Semiconductor A/C Cooling S3) - Maximale Leistung: 288W. 1 Kühler). 4X(Hohe Qualität und lange Lebensdauer. Material: Aluminium. Farbe: blau + Silber. Kühlleistung: 170W.
- 4X (Diy-Kits Thermoelectric Peltier Cooling Cooling System Water Cooling + Lu8) - 1 Wasserblock. Sie benoetigen 12V DC 6V, sind jedoch nicht in diesem Kit enthalten. 2 Luefter mit Schraube. 2 Kaltleitungsblock.
- DC24V 6A 120W Thermoelectric Cooler Cooling Peltier Plate 40x40mm Set of 5 White - Features: 1.Every product has a unique Manufacturing Part Number label on the inner package that proves it has been qualified,which include Part Number,Model Number and inspection date information; 2.If you have any questions about the item,please provide us the Manufacturing Part Number for checking,your profits will be guaranteed. 3.It does not need any refrigerant, can work continuously, has no rotating parts, will not produce gyration effect, has no sliding parts, is a solid piece, has no vibration, no noise, long life and easy installation. 4.Uses: Suitable for all kinds of small areas that need heat dissipation and cooling. Note:.
- 4X (DIY Kit TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling System9) - Versiegelungsprozess: Standard 704 Silikongummi, der alle Seiten versiegelt. Adopt TEC1-12706 Halbleiter Kuehlplatte, gute Qualitaet fuer den Einsatz. Halbleiterkuehlplatte: TEC1-12706. 1 x TEC1-12706.
- 4X(DC 5Vue9.4W Thermoelectric Cooler Peltier Cooler Cooling N4U2)2) - (Thermoelectrischer Kuehlung Modul. 1 x Thermoelectrischer Kuehler). Umweltfreundlich, keine Kuehl Fluessigkeit ist benutzt. Kuehlung oder Heitzung durch Veraenderung der Stromrichtung. Kuehlungspower:ue9,4W.
- 4X(100W TEC1-12709 Thermoelectric Cooler Peltierue2V Thermoelectric Cooling8) - 4X(Eine Form von Solidtate-Kuehlung. inhaerent sichere. ).
- 4X(288W Thermoelectric Peltier Cooler Dc12V Semiconductor A/C Cooling S6) - Maximale Leistung: 288W. 1 Kühler). 4X(Hohe Qualität und lange Lebensdauer. Material: Aluminium. Farbe: blau + Silber. Kühlleistung: 170W.
- 2X(DC 5Vue9.4W Thermoelectric Cooler Peltier Cooler Cooling Y2F5)5) - (Thermoelectrischer Kuehlung Modul. 1 x Thermoelectrischer Kuehler). Umweltfreundlich, keine Kuehl Fluessigkeit ist benutzt. Kuehlung oder Heitzung durch Veraenderung der Stromrichtung. Kuehlungspower:ue9,4W.
- 4X (DIY Kit TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling System4) - Versiegelungsprozess: Standard 704 Silikongummi, der alle Seiten versiegelt. Adopt TEC1-12706 Halbleiter Kuehlplatte, gute Qualitaet fuer den Einsatz. Halbleiterkuehlplatte: TEC1-12706. 1 x TEC1-12706.
- 4X (Diy-Kits Thermoelectric Peltier Cooling Cooling System Water Cooling + Lu6) - 1 Wasserblock. Sie benoetigen 12V DC 6V, sind jedoch nicht in diesem Kit enthalten. 2 Luefter mit Schraube. 2 Kaltleitungsblock.
- DC 5Vue9.4W Thermoelectric Cooler Peltier Cooler Cooling O8U4U4 - Thermoelectrischer Kuehlung Modul. 1 x Thermoelectrischer Kuehler. Umweltfreundlich, keine Kuehl Fluessigkeit ist benutzt. Kuehlung oder Heitzung durch Veraenderung der Stromrichtung. Kuehlungspower:ue9,4W.
- TEC1-12706 Thermoelectric Cooler Cooling Peltier Plate Module 12V -FY - 1 pcs TEC1-12706 Radiator Thermoelectric Cooler. Has a wide range of applications e.g CPU cooling. You can follow below process to chontact us. Size: 40mm x 40mm x 4mm. Gets ice cold or boiling hot within minutes (you can choose by switching the polarity).
- 4X(DC 5Vue9.4W Thermoelectric Cooler Peltier Cooler Cooling N3G2)2) - (Thermoelectrischer Kuehlung Modul. 1 x Thermoelectrischer Kuehler). Umweltfreundlich, keine Kuehl Fluessigkeit ist benutzt. Kuehlung oder Heitzung durch Veraenderung der Stromrichtung. Kuehlungspower:ue9,4W.
- 4X(100W TEC1-12709 Thermoelectric Cooler Peltierue2V Thermoelectric Cooler2) - 4X(Eine Form von Solidtate-Kuehlung. inhaerent sichere. ).
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat C5L9 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- 2X(100W TEC1-12709 Thermoelectric Cooler Peltierue2V Thermoelectric Cool1) - 2X(Eine Form von Solidtate-Kuehlung. inhaerent sichere. ).
- 2X(DC 5Vue9.4W Thermoelectric Cooler Peltier Cooler Cooling J8Q9)9) - (Thermoelectrischer Kuehlung Modul. 1 x Thermoelectrischer Kuehler). Umweltfreundlich, keine Kuehl Fluessigkeit ist benutzt. Kuehlung oder Heitzung durch Veraenderung der Stromrichtung. Kuehlungspower:ue9,4W.
- 60W TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling System ^ODYCAY - Must install heat sink or water-cooled radiator on the heat dissipation side; otherwise will burn the Peltier. Adopt TEC1-12706 semiconductor chilling plate, good quality for use. Semiconductor Chilling Plate: TEC1-12706.
- TEC1 12715 136.8W 12V-15.4V 15A TEC thermoelectric cooler peltier TEC1-12715 KAY - 1pcs thermoelectric cooler peltier. Operates from 0~15.4V DC and 0~15A. Operates Temperature: -40 to 90. Max power consumption: 165 Watts. Size: 40mm x 40mm x 4mm. Original box: NO. Model: TEC1-12715.
- 5x TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module F^AY - Cooling power: Qcmax 58-65W. Size: Approx. 40mm x 40mm x 3.8mm. These devices must be used in conjunction with a heat sink to avoid burned. Power Cord: Approx. Operates Temperature: -30 ℃ to 70 ℃.
- Peltier Thermoelectric Cooler DC12V 30A Semiconductor Air Conditioning Cooling System W2H3 - Strom: 30A. Farbe:Wie abgebildet. Kühlleistung: 170W.
- Car Battery Charger with LCD Touch Screen Display Repair Charger, EU-St Q9D6 - 1 x Autobatterieladegerät. Ausgangsspannung: DC13,8-15,5V. Ausgangsstrom: DC 10 (max.). Spannung: 12V.
- TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Eleme K2S2 - Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler. Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- 300W Thermoelectric Peltier Refrigerator DC12V Semiconductor Air Conditioners K N4O2 - 1 x Kühler. Farbe: Wie abgebildet. Größe: 255 mm x 60 mm x 60 mm. Kühlleistung: 300 W.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor F9B8 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- 12V 6A Thermoelectric Peltier Semiconductor Cooler Refrigeration Cooling B6V3 - Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor Technologies and electronic assembly techniques. Application for small space cooling, air cooling dehumidification, semiconductor refrigeration learning etc.
- 2x DC 5Vue9.4W Thermoelectric Cooler Peltier Cooler Cooling L9G3 - Thermoelectrischer Kuehlung Modul. 2 x Thermoelectrischer Kuehler. Umweltfreundlich, keine Kuehl Fluessigkeit ist benutzt. Kuehlung oder Heitzung durch Veraenderung der Stromrichtung. Kuehlungspower:ue9,4W.
- 2x DIY Electric Cooler Cooling System Semiconductor Cooling System Kit Cooling S7H1 - Feature1: Thermoelektrische Kühlung. Premium Halbleiterkühler mit super Leistung und langer Lebensdauer. Dieser 15L Wasserkühler kann die Temperatur auf 8-10 Grad unter die normale Temperatur senken.
- Car Battery Charger with LCD Touch Screen Display Repair Charger, EU-St F8M4 - 1 x Autobatterieladegerät. Ausgangsspannung: DC13,8-15,5V. Ausgangsstrom: DC 10 (max.). Spannung: 12V.
- Peltier Thermoelectric Cooler DC12V 30A Semiconductor Air Conditioning Cooling System V2R5 - Strom: 30A. Farbe:Wie abgebildet. Kühlleistung: 170W.
- TEC1-12704 Thermoelectric Cooler Peltier 30mmx30mm TEC1 12704 Elements Modu R2U7 - 1 x Thermoelectric Cooler Peltier. Size: 30 x 30 x 3.2mm. Material: semiconductor. Colour: white. Assembly pressure: 85N/cm2.
- 12V 5.8A 65W TEC1-12706 Thermoelectric Cooler Cooling Peltier Plate Module B4F2 - 1X 12706 Thermoelectric Cooler. QMax (W) : 65W. Cooling piece is very simple to install and use. Size: 40mm x 40mm x 3.8mm. Material: Ceramic. Color : White. Net weight : 22g.
- TEC1-12705 Thermoelectric Peltier 40*40MM 12V Peltier Elemente Mod-HV
- TEC1-12710 100W TEC1 12710 12V 10A TEC thermoelectric cooler peltier IOy&AJ
- TEC1 12715 136.8W 12V-15.4V 15A TEC thermoelectric cooler peltier TEC1-12715~AJ
- TEC1-12706 Thermoelectric Cooler Cooling Peltier Plate Module 12-AJ
- Refrigeration Plate Cooler Semiconductor Peltier Cold Cooling Fan 240W Durable - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- Refrigeration Plate Cooler Semiconductor Peltier Cooling Fan Freezer Device - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- TEC1-12705 Thermoelectric Peltier 40*40MM 12V Peltier Elemente Mod-HO
- DIY Electric Cooler Cooling System Semiconductor Cooling System Kit Cooling Cooler K1W5 - Feature1: Thermoelektrische Kühlung. Premium Halbleiterkühler mit super Leistung und langer Lebensdauer. Dieser 15L Wasserkühler kann die Temperatur auf 8-10 Grad unter die normale Temperatur senken.
- 12V 6A Electric Peltier Half Conductor Cooler Cooler System Kit Kue A7A3 - 1 x Semiconductor Kaeltekuehler. Anwendung fuer Small Space Cooling, Luftkuehlung Entfeuchtung, Halbleiterkuehlung Lerntheorie usw. Arbeitsspannung: 12V. Arbeitsstrom: 6A. Stabil und praktisch.
- 60W TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling System ^ODYCMJ - Must install heat sink or water-cooled radiator on the heat dissipation side; otherwise will burn the Peltier. Adopt TEC1-12706 semiconductor chilling plate, good quality for use. Semiconductor Chilling Plate: TEC1-12706.
- 5x TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module F^MJ - Cooling power: Qcmax 58-65W. Size: Approx. 40mm x 40mm x 3.8mm. Tmax(Qc=0): up to 65 ℃. Imax (A): 5.8A. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
- TEC1 12715 136.8W 12V-15.4V 15A TEC thermoelectric cooler peltier TEC1-12715 KMJ - 1pcs thermoelectric cooler peltier. Operates from 0~15.4V DC and 0~15A. Operates Temperature: -40 to 90.
- TEC1-12710 100W TEC1 12710 12V 10A TEC thermoelectric cooler peltier H_MJ - 1pcs thermoelectric cooler peltier. Operates from 0~15.2V DC and 0~10A. Operates Temperature: -30 to 70.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 4Chip Refrigeration Kit Thermoelectric Peltier Water Cooling Decive Plate + fan - Cooling Plate + Fan. Note: This Set Is Water Cooling Is Not Used to Cool Water. Cooling Power: 170w. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface. Your satis faction is our ultimate goal.
- 12V 210W Peltier Cooler Semiconductor Cooling Fan Air Cooling Refrigeration - Power: Maximum power 210W (3 pieces of excellent 12706 chip). Semiconductor refrigerator. Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity.
- 1pcs DIY 120W TEC Peltier Semiconductor Refrigerator Water Cooling Air Conditioner V4L6 - Starker wassergekuehlter Klimaanlagenkuehler. Diese Klimaanlage ist ein Raum zum Kuehlen und Blasen von Klimaanlagen. Der Hauptmotor dient zur Kuehlung des Wassers.Es ist heiss, nicht kalt. Leistung: 120W.
- DC 5Vue9.4W Thermoelectric Cooler Peltier Cooler Cooling T1F9 - Thermoelectrischer Kuehlung Modul. 1 x Thermoelectrischer Kuehler. Umweltfreundlich, keine Kuehl Fluessigkeit ist benutzt. Kuehlung oder Heitzung durch Veraenderung der Stromrichtung. Kuehlungspower:ue9,4W.
- Refrigeration Plate Cooler Semiconductor Peltier Cold Cooling Fan 240W Durable - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- Peltier Thermoelectric Cooler DC12V 30A Semiconductor Air Conditioning Cooling System X9O4 - Strom: 30A. Farbe:Wie abgebildet. Kühlleistung: 170W.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 2Pcs 40X40mm Thermoelectric Generator SP1848-27145 Peltier TEG Module U8U1 - 2 x SP1848-27145 Peltier TEG Module. and high quality. Soldering agent is low temperature solder (Tin-Bismuth Alloy).
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Eleme Z3J6 - Chipmodell: TEC1-12705. 1 x thermoelektrischer Kühler Peltier. Größe: 40 x 40 x 3,8 mm. Material: Halbleiter. Farbe: weiß. Arbeitsumgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wird direkt die Kühleffizienz beeinflussen).
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan 12V - 240w Semiconductor Refrigeration Thermoelectric Peltier Cold Plate Cooler W/Fan. How to Use: Place the Cooling Product on the Smooth Surface of the Semiconductor Refrigeration Plate. 240w Semiconductor Cooler with Fan.
- 144W Thermoelectric Peltier Refrigeration Cooler 12V Semiconductor Air CondE3 - Maximum power: 144W. 1 x Cooler. colour: silver + blue. Cooling power: 100W.
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Eleme H5Z7 - Chipmodell: TEC1-12705. 1 x thermoelektrischer Kühler Peltier. Größe: 40 x 40 x 3,8 mm. Material: Halbleiter. Farbe: weiß. Arbeitsumgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wird direkt die Kühleffizienz beeinflussen).
- 240W 12V Peltier Cooler Cold Plate Semiconductor Refrigeration Thermoelectric - 240w Semiconductor Refrigeration Thermoelectric Peltier Cold Plate Cooler W/Fan. 240w Semiconductor Cooler with Fan. Power: Maximum Power of 240w at 15.4 V. 1 240w Semiconductor Cooler with Fan. How to Use: Place the Cooling Product on the Smooth Surface of the Semiconductor Refrigeration Plate.
- 240W 3-Chip Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan - 12V 240W 3-Chip Semiconductor Refrigeration Cooler DIY Radiator Cooling Device. 12V 240W Dual-Chip Semiconductor Refrigeration Cooler DIY Radiator Cooling Device. ❖ Maximum Power: 240W. DIY Semiconductor Surface Cooling Version.
- 60W TEC1-12706 Thermoelectric Cooler Fan Peltier Cooling System DIY Kit M7Q3 - Must install heat sink or water-cooled radiator on the heat dissipation side; otherwise will burn the Peltier. Adopt TEC1-12706 semiconductor chilling plate, good quality for use. Semiconductor Chilling Plate: TEC1-12706.
- 12V Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- Refrigeration Cooler Semiconductor System Set Kit For Equipment DC 12V - Practical Use: Can be flexibly applied to small space refrigeration, semiconductor refrigeration study and so on. Feature: 1. Water Cooling: The semiconductor cooler adopts water cooling for efficient heat dissipation and stable working performance.
- Refrigeration Cooler Semiconductor Cooling System Set Kit For Equipment 12V - Extensive Use: For small space refrigeration, air cooled dehumidification, semiconductor refrigeration study, etc. Feature: 1. Item Type: Refrigeration Cooler. Easy to Install: Designed to have a compact size and a light weight, the easy installation can be finished within minutes.
- Refrigeration Cooler Thermoelectric Peltier Cooling System Set Kit - Feature: 1. Note: The radiating device or heat absorber must be installed when the power is turned on, if the heat absorber is not assembled, the Peltier refrigeration unit will be burned out. Item Type: Refrigeration Cooler.
- 72W 12V Peltier Semiconductor Refrigeration Cooler Module Cooling System for w/ - Power: 72W. Semiconductor coolers are a form of cooling that combines semiconductor technology and electronic assembly technology. Suitable for small space cooling, air cooling dehumidification, semiconductor refrigeration learning for, etc.
- 3pcs TEC1-12705 Semiconductor Refrigeration Tablets TEC1-12705 12V 5A - 【Type】: TEC1-12705【Size】: 40*40*3.8mm【Cooling Power】: Qcmax 50W★Easy to install and use★Great for your own custom car drink warmer/cooler as well, reverse the polarity to get ice cold in minutes or heat to boiling, used for many applications from CPU coolers to alternate power sources.Feature: Model:：TEC1-12705 Size: 40*40*3.8mm Number of Component Pairs:127pcs Internal Resistance: 2.4~2.7Ω(Ambient temperature 23±1℃, 1kHZ Ac test) Maximum Temperature Difference: Tmax(Qc=0) Above 61℃ Work Current: Imax=5A(maximum voltage 15.4V 5A at startup) Rated Voltage: DC12V（Vmax：15.4V） Cooling Power: Qcmax 50W Assembly Pressure: 85N/cm2 Temperature Range: -55℃～83℃ (Excessively high ambient temperature will directly affect the cooling efficiency)
- 12V 6A Thermoelectric Peltier Refrigeration Cooling I2M9 System Cooler Kit Z9O6 - 1 x Thermoelectric Peltier Refrigeration Cooling System Kit. Must fititng Radiator Heartsink when Power ON,not responsible for Burn Peltier if Heartsink is not Assemble. The hot end of the cooling fin must be well dissipated.
- Thermoelectric Cooler Peltier Module TEC112706 TEC112709 TEC112710 TEC112715 12V - Working current: Imax = 4.3-4.6A (rated at 12V). Refrigeration power: Qcmax 50-60W.
- Portable Cooling Module 12V 72W Semiconductor Refrigeration Air Cooling Kit - Power: 72W. Application for small space cooling, air cooling dehumidification, semiconductor refrigeration learning etc. Refrigeration effect depends on the size of the cooling space, ambient temperature, heat insulation, seal ability, etc.
- 2x DIY Electric Cooler Cooling System Semiconductor Cooling System Kit CoolerY6Y7 - Feature1: Thermoelektrische Kühlung. Premium Halbleiterkühler mit super Leistung und langer Lebensdauer. Dieser 15L Wasserkühler kann die Temperatur auf 8-10 Grad unter die normale Temperatur senken.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Cooler R5F2 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- Peltier Thermoelectric Cooler DC12V 30A Semiconductor Air Conditioning Cooling System P5Z4 - Strom: 30A. Farbe:Wie abgebildet. Kühlleistung: 170W.
- 12V 5.8A 65W TEC1-12706 Thermoelectric Cooler Cooling Peltier Plate Module B3O7 - 1X 12706 Thermoelectric Cooler. QMax (W) : 65W. Cooling piece is very simple to install and use. Size: 40mm x 40mm x 3.8mm. Material: Ceramic. Color : White. Net weight : 22g.
- 2x DC 5Vue9.4W Thermoelectric Cooler Peltier Cooler Cooling S9E1 - Thermoelectrischer Kuehlung Modul. 2 x Thermoelectrischer Kuehler. Umweltfreundlich, keine Kuehl Fluessigkeit ist benutzt. Kuehlung oder Heitzung durch Veraenderung der Stromrichtung. Kuehlungspower:ue9,4W.
- 5x TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Plate Modul--- - Cooling power: Qcmax 58-65W. Size: Approx. 40mm x 40mm x 3.8mm. Imax (A): 5.8A. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
- Semiconductor Refrigeration Peltier Cooler DIY Cooling Fan Module Kit 140W 12V - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- 2x DIY Electric Cooler Cooling System Semiconductor Cooling System Kit CoolerW5T8 - Feature1: Thermoelektrische Kühlung. Premium Halbleiterkühler mit super Leistung und langer Lebensdauer. Dieser 15L Wasserkühler kann die Temperatur auf 8-10 Grad unter die normale Temperatur senken.
- DC 5V 19.4W Thermoelectric Cooler Peltier Cooler Cooling W5Z1 - Thermoelectric Cooling Module. Cooling or heating by changing current direction. Couples: 49.
- 4X TEC1-12704 Thermoelectric Cooler Peltier 30mm x 30mm TEC1 12704 EleB2R4 - Chipmodell: TES1-12704 --TEC1-12704. 4 x Peltier für thermoelektrische Kühler. Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- Dc12V Semiconductor Air Conditioner Cooling Systa 288W Thermo Electric Cooler - Maximum power: 288W. Cooling power: 170W. Color: blue + silver.
- 240W Refrigeration Plate Cooler Semiconductor Peltier Cold Cooling Fan 12V - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 12V Cooler Fan Air Cooling Thermoelectric Peltier Refrigeration Cooling System - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V 576W 8Chips TEC1-12706 Thermoelectric Peltier Cooler DIY Cooler Air Cooling - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- Refrigeration Cooler Thermoelectric Peltier Cooling System Set Kit For Equipment - Feature: 1. Note: The radiating device or heat absorber must be installed when the power is turned on, if the heat absorber is not assembled, the Peltier refrigeration unit will be burned out. Item Type: Refrigeration Cooler.
- Refrigeration Cooler Semiconductor Cooling System Set Kit For Equipment 12V 72W - Feature: 1. Power: 72W. Extensive Use: For small space refrigeration, air cooled dehumidification, semiconductor refrigeration study, etc. Item Type: Refrigeration Cooler. Easy to Install: Designed to have a compact size and a light weight, the easy installation can be finished within minutes.
- Refrigeration Cooler Semiconductor System Set Kit For Equipment DC 12V 6A - Practical Use: Can be flexibly applied to small space refrigeration, semiconductor refrigeration study and so on. Feature: 1. Water Cooling: The semiconductor cooler adopts water cooling for efficient heat dissipation and stable working performance.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat Q9W8 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor M7G6 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- 12V 20A Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Fan - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 2pcs TEC1-12706 Semiconductor Refrigeration Tablets 12V 6A Thermoelectric Cooler - Otherwise the overheating will burn it out.
- DIY Peltier Cooler Semiconductor Refrigeration Cooling Fan Module Dehumidifier - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Fan 12V 20A - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- US~Semiconductor Refrigeration Thermoelectric Peltier Cold Plate Cooler w/ Fan - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- Water Thermoelectric Peltier 12V 50~60W Accessories Cooler Cooling Module
- 12V 240W Peltier Cold Plate Cooler 4 Cold Cooling Plates Cooler W/ Fan 20*22cm - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease.
- Thermoelectric Peltier Refrigeration Cooler DC12V 30A Semiconductor Air Con Z2S1 - Current: 30A. 1 x Semiconductor cooling. Maximum power: 288W. Cooling power: 170W. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing.
- Triple-Core Semiconductor Cooling Fan Air Cooling Refrigeration DIY Kit 12V - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- Triple-Core Semiconductor Cooling Fan Thermoelectric Peltier Cooling Kit 210W - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 72W Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Fan 12V US - This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. parameter: Working voltage: 12V Maximum power: 72W Maximum current: 4-6A Product size: 118*100*68MM The package includes: 1*DIY semiconductor air cooling kit.
- 576W Thermoelectric Peltier Cooler Air Cooling DIY 8-Chip 12V For Refrigeration - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse.
- Thermoelectric Peltier Refrigeration Cooling System Cooler Fan 12V DIY Kit New - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 12A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 3X DC 5V 19.4W Thermoelectric Cooler Peltier Cooler Cooling X7D2 - Thermoelectric Cooling Module. Cooling or heating by changing current direction. Max Temperature Difference: 67 C.
- 2X DC 5V 19.4W Thermoelectric Cooler Peltier Cooler Cooling Z8W9 - Thermoelectric Cooling Module. Cooling or heating by changing current direction. Max Temperature Difference: 67 C.
- 240w Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler DIY Cooler Air Cooling - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit NEW - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Peltier Cooler Semiconductor Peltier Cooler Air Cooling Device Refrigeration DIY - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- Semiconductor Refrigeration Plate Cooler Peltier Cold Cooling Fan Summer HOT!! - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- TEC1-12706 Thermoelectric Peltier Module Water-Cooler Cooling System DIY-tools - Adopt TEC1-12706 semiconductor chilling plate, good quality for use. Refrigeration Power : Max. Great DIY kit for electronic enthusiasts in semiconductor cooling applications. Conduction Module Size : 60 45 21mm (Approx.).
- 240W 12V Thermoelectric Cooler System DIY Peltier Semiconductor Cooling Module - This thermoelectric cooler uses 12715 cooling module which has better cooling effect. Power: 240W. It can be used to make a small refrigerator, mini air conditioner or cooling device for pets.
- 12V 5.8A 65W TEC1-12706 Thermoelectric Cooler Cooling Peltier Plate Module 40xh - 1X 12706 Thermoelectric Cooler. QMax (W) : 65W. Cooling piece is very simple to install and use. Size: 40mm x 40mm x 3.8mm. Material: Ceramic. Color : White. Net weight : 22g.
- 12V Semiconductor Thermoelectric Peltier Air Cooling Dehumidification System - Application for small space cooling, air cooling dehumidification, semiconductor refrigeration learning, etc. Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor Technologies and electronic assembly techniques.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat V6Y2 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- Peltier Thermoelectric Cooler DC12V 30A Semiconductor Air Conditioning Cooling System - Strom: 30A. Farbe:Wie abgebildet. Kühlleistung: 170W.
- 300W Thermoelectric Peltier Cooling Cooler DC12V Semiconductor Air Conditioners K F3H5 - 1 x Kühler. Farbe: Wie abgebildet. Größe: 255 mm x 60 mm x 60 mm. Kühlleistung: 300 W.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor Z3H4 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- 300W Thermoelectric Peltier Refrigerator DC12V Semiconductor Air Conditioners K J2L3 - 1 x Kühler. Farbe: Wie abgebildet. Größe: 255 mm x 60 mm x 60 mm. Kühlleistung: 300 W.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor I8J5 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- DIY electric cooler cooling system semiconductor cooling system kit cooling system - Feature1: Thermoelektrische Kühlung. Premium Halbleiterkühler mit super Leistung und langer Lebensdauer. Dieser 15L Wasserkühler kann die Temperatur auf 8-10 Grad unter die normale Temperatur senken.
- 2x DIY Electric Cooler Cooling System Semiconductor Cooling System Kit CoolerY9S6 - Feature1: Thermoelektrische Kühlung. Premium Halbleiterkühler mit super Leistung und langer Lebensdauer. Dieser 15L Wasserkühler kann die Temperatur auf 8-10 Grad unter die normale Temperatur senken.
- Refrigeration Cooler 30A Thermoelectric Peltier Semiconductor Cooling DIY Kit - Current: 30a. 1 x Cooler. Cooling Power: 170w. Item Size: 180 60 62mm / 7.09 2.36 2.44in. Material: Aluminum.
- 12V Thermoelectric Peltier Refrigeration Cooling System Air Cooler Fan DIY 140W - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 240W Semiconductor Refrigeration Cooler Module Thermoelectric Peltier Cold Plate - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 240W 12V Peltier Refrigeration Cooler Semiconductor Thermoelectric Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- Semiconductor Refrigerator Thermoelectric Cooler Refrigeration DIY 210W USA - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 8-Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device 12V 576W - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- High Quality DIY Electronic Semiconductor Surface Cooling Version Peltier Cooler - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V 4 Chip Thermoelectric Peltier Cooler Water Cooling Refrigeration System USA - Note: This Set Is Water Cooling Is Not Used to Cool Water. 1 4 Chip Refrigerator. Cooling Power: 170w. Cooling Plate + Fan. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface.
- 12V 8 Chip TEC1-12706 576W Thermoelectric Peltier Cooler DIY Air Cooling Device - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- TEC1-04904 5V 4A Thermoelectric Cooler Module for Cooling Peltier Plate - Eigenschaften: Quadratisches Keramik-Kühlmodul, 2-Draht-Anschluss, thermoelektrisches Kühlermodul. Es wird häufig in Wasserspendern, kühlschränken oder anderen Kühlgeräten eingesetzt. Ein hervorragendes Ersatz-Kühlmodul für Ihr altes beschädigtes Kühlgerät.
- TEC1-12707 7A 12V 60W Thermoelectric Cooler Peltier Plate Module 40x40x3.5mm - Es ist an eine 12-Volt-Stromversorgung angeschlossen und hat die Zelle einen Temperaturunterschied zwischen den beiden Seiten von etwa 66 ° C. Hinweis: Schließen Sie die Zelle nicht länger als einige Sekunden ohne einen Kühlkörper an der heißen Seite an eine Stromversorgung an, da sonst die Peltier-Zelle intern überhitzt und zerstört wird.
- TES1-12708 0.8A 15V 7W Thermoelectric Cooler Peltier Plate Module 20x20x3.3mm - Es ist an eine 15-Volt-Stromversorgung angeschlossen und hat die Zelle einen Temperaturunterschied zwischen den beiden Seiten von etwa 65 ° C. Hinweis: Schließen Sie die Zelle nicht länger als einige Sekunden ohne einen Kühlkörper an der heißen Seite an eine Stromversorgung an, da sonst die Peltier-Zelle intern überhitzt und zerstört wird.
- TEC1-12703 3A 12V 27W 40x40x4mm Thermoelectric Cooler Peltier Plate Module - Beschreibung: Angeschlossen an eine 5,78 Volt Stromversorgung hat die Zelle eine Temperaturdifferenz zwischen den beiden Seiten von etwa 65C (149F). Hinweis: Schließen Sie die Zelle nicht länger als ein paar Sekunden an eine Stromversorgung an, ohne dass eine Warmwasserspitze auf der heißen Seite ist, da sonst eine interne Überhitzung und Zerstörung der Peltierzelle stattfindet.
- TEC 1-12715 11.8 12V 142W 40x40x3.5mm Thermoelectric Cooler Peltier Module - Beschreibung: in Verbindung mit einem 5,78-Volt Stromversorgung der Zelle haben eine Temperaturdifferenz zwischen den beiden Seiten von ca. 65°C (149 F). Hinweis: die Zelle nicht an eine Stromversorgung anschließen für mehr als ein paar Sekunden ohne Kühlkörper auf der heißen Seite ansonsten wird es Interne Überhitzung und Zerstörung des Peltier Zelle.
- TES1-7102 2A 8V 10W 23x23x4.5mm Thermoelectric Cooler Peltier Plate Module - Beschreibung: Angeschlossen an eine 5,78 Volt Stromversorgung hat die Zelle eine Temperaturdifferenz zwischen den beiden Seiten von etwa 65C (149F). Hinweis: Schließen Sie die Zelle nicht länger als ein paar Sekunden an eine Stromversorgung an, ohne dass eine Warmwasserspitze auf der heißen Seite ist, da sonst eine interne Überhitzung und Zerstörung der Peltierzelle stattfindet.
- Triple Core Thermoelectric Peltier Refrigeration Cooling Cooler DIY 210W 12V - 12V Triple Core Thermoelectric Peltier Refrigeration Cooling Cooler DIY Kit USA Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- Electronic DIY Three-chip Semiconductor Cooler Surface Cooling Version 240W 12V - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 180W High Quality Electronic Peltier Cooler Refrigerator Kit For 40L Fish Tank - Features: 1. The cooler uses high-end refrigeration modules with high power and good durability. 2. The area of the cooling block is larger, so it can contact more water for rapid cooling. 3. The four hollow copper tubes with refrigerant inside will quickly transfer heat, thereby improving cooling efficiency. Specifications: Voltage: DC 12V Power: 180W Current: 15A (180W) Suitable for: 40L fish tank Size: 143 * 96 * 162mm / 5.62 * 3.77 * 6.37" Outer diameter of water inlet/outlet: 8mm / 0.31" Packing including： 1 * Refrigerator Kit.
- Refrigeration Thermoelectric Module Peltier Cooler Semiconductor Air Cooling Kit - This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. Parameter: Working voltage: 12V Maximum power: 72W Maximum current: 4-6A Product size: 118*100*68MM The package includes: 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A .
- Semiconductor Refrigeration Thermoelectric Peltier Cold Plate Cooler W/Fan 240W - Product Specifications: Voltage: 12v Power: Maximum Power of 240w at 15.4 V Maximum Current: 20a Steady Current: 14a Product Cooling Plate Size：20*22cm Product Composition: 4 Cooling Plates, 4 G0 Fans, 4 Mesh Covers. 4 Cold-end Aluminum Blocks, 1 180*210nn Aluminum Plate, 4 Sets of Screws, 1 Piece of 180*210 Insulation Cotton, 4 Sets of Silicone Grease How to Use: Place the Cooling Product on the Smooth Surface of the Semiconductor Refrigeration Plate The Package Includes: 240w Semiconductor Cooler with Fan.
- 300W Thermoelectric Peltier Refrigerator DC12V Semiconductor Air Conditioners K Q4Q4 - 1 x Kühler. Farbe: Wie abgebildet. Größe: 255 mm x 60 mm x 60 mm. Kühlleistung: 300 W.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat S7L8 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- TEC1-12704 Thermoelectric Cooler Peltier 30mmx30mm TEC1 12704 Elements Modu H4N7 - 1 x Thermoelectric Cooler Peltier. Size: 30 x 30 x 3.2mm. Material: semiconductor. Colour: white. Assembly pressure: 85N/cm2.
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Elements O7X4 - 1 x Thermoelectric Cooler Peltier. Size: 40 x 40 x 3.8mm. Material: semiconductor. Colour: white.
- 12V 4-6A Peltier Cooling System Refrigeration Kit Cooler Fan DIY Thermoelectric - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- 140W 12V Semiconductor Cooler Thermoelectric Peltier Refrigeration Cooling Fan - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Thermoelectric Water Cooling System Refrigeration Cooler Water Cooling Device - Cooling plate + fan. Note: This set is water cooling is not used to cool water. Cooling power: 170W. The hot end uses water circulation to cool the semiconductor hot surface. Your satis faction is our ultimate goal.
- 3-Chip 210W 12V Semiconductor Refrigeration Peltier Cooler Air Cooling 300mm - 3-Chip 210W Semiconductor Refrigeration Peltier Cooler Air Cooling DIY Kit USA Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- Electronic Components DIY Semiconductor Air Cooling Kit 118*100*68mm 72W 12 Volt - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- DIY Cooler Kit 12V Semiconductor Cooling System Heatsink Module kit+Fan 420W - Power : 420W. Application : DIY electric semiconductor refrigeration radiator machine can be used in small space cooling, pet air conditioner, learning the principle of semiconductor refrigeration and more.
- Semiconductor Refrigeration Cooler Cooling Fan Peltier Coolers Silent 12V 140W - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 576W 8-Chip TEC1-12706A DIY Thermoelectric Peltier Cooler Air Cooling Device TOP - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V Peltier Cooler DIY Semiconductor Cooling Fan Air Cooling Refrigeration Kit - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- Peltier Semiconductor Refrigeration Thermoelectric Air Cooling 12V 118*100*68MM - This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. parameter: Working voltage: 12V Maximum power: 72W Maximum current: 4-6A Product size: 118*100*68MM The package includes: 1*DIY semiconductor air cooling kit.
- Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan 240w - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 240W Thermoelectric Peltier Refrigeration Cooling System Kit Cooler W/ 4 Fan 12V - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- Semiconductor Refrigeration Cooling Device Thermoelectric Cooler 20A 12V CJY - This thermoelectric cooler uses semicond uctor for good cooling effect. 1 x Thermoelectric Cooler. Rated Current: 20A. The cooler can be used to make small fridge, mini air conditioner or cooling device for pet.
- Aluminum Alloy Semiconductor Refrigeration Air Dehumidifier Cooling Fan Silent - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit New - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 240w Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 240W 12V Semiconductor Refrigeration Cooler Thermoelectric Peltier Cold Plate - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- TEC1‑12715 Cooling Plate Semiconductor Cooler For Thermoelectric Board DC12V - Feature: 1. This cooling plate is suitable for thermoelectric cooler refrigerator board. Made of ceramic panels and semiconductor materials for good performance. Item Type: Cooling Plate. 1 x TEC1-12715 Cooling Plate.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - (12V 240W Dual-Chip Semiconductor Refrigeration Cooler DIY Radiator Cooling Device. ❖ Maximum Power: 240W. DIY Semiconductor Surface Cooling Version. 1 DIY Semiconductor Surface Cooling Version. 3) It adoptsDual-chip Cooling.
- 1x 140W 12V Semiconductor Refrigeration Cooling Fan DIY Peltier Coolers Module - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 72W 12 Volt High-Quality DIY Semiconductor Air Cooling Kit Fluorine-free Durable - Maximum power: 72W. This product is a newly manufactured DIY semiconductor air-cooled kit. 1 DIY semiconductor air cooling kit. Your satis faction is our ultimate goal. Feature Creative Design，Durable Material，Beautiful Appearance.
- 210W Semiconductor Peltier Cooler Air Cooling Refrigeration DIY 3-Chip - 3-Chip 210W Semiconductor Refrigeration Peltier Cooler Air Cooling DIY Kit USA Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan 240w # - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 576W Thermoelectric Peltier Cooler Air Cooling DIY 8-Chip 12V For Refrigeration - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse.
- 240W Electronic Semiconductor DIY Refrigerator Cooler Surface Cooling System 12V - (12V 240W Dual-Chip Semiconductor Refrigeration Cooler DIY Radiator Cooling Device. ❖ Maximum Power: 240W. DIY Semiconductor Surface Cooling Version. 1 DIY Semiconductor Surface Cooling Version. 4) The ambient temperature is about 20°C, andthe lowest surface temperature is -15°C.
- Semiconductor Cooling Fan Kit 140W 12V Special Bottom Design Large Air Volume - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Triple-Core Semiconductor Cooling Fan High-quality Refrigeration Chip Efficient - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- High Quality Electronic 4 Chip Semiconductor Refrigerator Peltier Cooler DC 12V - The hot end uses water circulation to cool the semiconductor hot surface. Your satis faction is our ultimate goal. Maximum power: 288W (15.4V). Cooling power: 170W. TypePeltier Cooler. Feature Creative Design，Durable Material，Beautiful Appearance.
- DC 12V 288W 4 Chip DIY Thermoelectric Refrigeration Cooler Water Cooling System - Maximum power: 288W (15.4V). Note: This set is water cooling is not used to cool water. 1 4 chip refrigerator. Cooling power: 170W. Cooling plate + fan. The hot end uses water circulation to cool the semiconductor hot surface.
- US Refrigeration Thermoelectric Module Peltier air Cooler Cooling System DIY Kit - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- TEC1-12704 Thermoelectric Cooler Peltier 30mmx30mm TEC1 12704 Elements Module h - 1 x Thermoelectric Cooler Peltier. Internal resistance: 2.5~3.5 ohm (ambient temperature 23 +/- 1℃, 1kHZ Ac test). Maximum temperature difference: △Tmax(Qc=0) above 65℃. Wire specification: lead length 70 +/- 5mm RV standard wire single head 5mm tin-plated.
- Semiconductor Refrigeration Thermoelectric Peltier Cold Plate Cooler with Fan... - Semiconductor Refrigeration Thermoelectric Peltier Cold Plate Cooler with Fan for Making Small Fridge. Features: It is made of high quality shell material, and excellent electronic components,with stable performance and durability It can be used for small space refrigeration, for example, testbed cooling, flat product cooling, etc.
- ineo Aluminum M.2 2280 SSD Heatsinks with 20mm Fan and Pure Cooper Strip for ... - Manufacturer : ineo. Heat Conductive Material (1 x 0.5mm; 1 x 1mm; 8 x 0.8mm small square): Unique Nano silicone thermal pad. Heatsink Design: Groove design, greatly increase the heat dissipation area.
- Peltier Thermoelectric Cooler DC12V 30A Semiconductor Air Conditioning Cooling System V8J4 - Strom: 30A. Farbe:Wie abgebildet. Kühlleistung: 170W.
- 300W Thermoelectric Peltier Refrigerator DC12V Semiconductor Air Conditioners K G5S6 - 1 x Kühler. Farbe: Wie abgebildet. Größe: 255 mm x 60 mm x 60 mm. Kühlleistung: 300 W.
- Electrical Semiconductor Refrigeration Cooling Fan Cooler Peltier Coolers 140W - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- New 12V Refrigeration Plate Cooler Semiconductor Peltier Cold Cooling Fan 240W ! - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Kü J2Y1 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- 2x DC 5Vue9.4W Thermoelectric Cooler Peltier Cooler Cooling N6C1 - Thermoelectrischer Kuehlung Modul. 2 x Thermoelectrischer Kuehler. Umweltfreundlich, keine Kuehl Fluessigkeit ist benutzt. Kuehlung oder Heitzung durch Veraenderung der Stromrichtung. Kuehlungspower:ue9,4W.
- 2x DIY Electric Cooler Cooling System Semiconductor Cooling System Kit CoolerN8K5 - Feature1: Thermoelektrische Kühlung. Premium Halbleiterkühler mit super Leistung und langer Lebensdauer. Dieser 15L Wasserkühler kann die Temperatur auf 8-10 Grad unter die normale Temperatur senken.
- 2x DC 5Vue9.4W Thermoelectric Cooler Peltier Cooler Cooling W3V2 - Thermoelectrischer Kuehlung Modul. 2 x Thermoelectrischer Kuehler. Umweltfreundlich, keine Kuehl Fluessigkeit ist benutzt. Kuehlung oder Heitzung durch Veraenderung der Stromrichtung. Kuehlungspower:ue9,4W.
- TEC1-12704 30mm*30mm 12V Slim Heatsink TEC Thermoelectric Cooler Peltier - Ceramics thermoelectric Cooler semiconductor module TES1-12704. Model number: TES1-12704. Should use with a heat sink. Slim and compact. Can be used in refrigerator,Portable cooling car box. Solid state, vibration free, noise-free.
- 2Pcs 40X40mm Thermoelectric Generator SP1848-27145 Peltier TEG Module C7T5 - 2 x SP1848-27145 Peltier TEG Module. and high quality. Soldering agent is low temperature solder (Tin-Bismuth Alloy).
- 2X DC 5V 19.4W Thermoelectric Cooler Peltier Cooler Cooling M8U7 - Thermoelectric Cooling Module. Cooling or heating by changing current direction. Max Temperature Difference: 67 C.
- Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan 240w ! - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- DIY Thermoelectric Cooler Cooling System Semiconductor Refrigeration Systemarr - Feature1: Thermoelectric Refrigeration. Feature2: Thermoelectric Cooling System. Feature3: Semiconductor Refrigeration. Premium semiconductor cooler with super power and long durability. Model Number: Semiconductor Cooler.
- 2x DC 5Vue9.4W Thermoelectric Cooler Peltier Cooler Cooling W1E8 - Thermoelectrischer Kuehlung Modul. 2 x Thermoelectrischer Kuehler. Umweltfreundlich, keine Kuehl Fluessigkeit ist benutzt. Kuehlung oder Heitzung durch Veraenderung der Stromrichtung. Kuehlungspower:ue9,4W.
- 2x DC 5Vue9.4W Thermoelectric Cooler Peltier Cooler Cooling R7Z2 - Thermoelectrischer Kuehlung Modul. 2 x Thermoelectrischer Kuehler. Umweltfreundlich, keine Kuehl Fluessigkeit ist benutzt. Kuehlung oder Heitzung durch Veraenderung der Stromrichtung. Kuehlungspower:ue9,4W.
- Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan 240w - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- TEC1-12704 Thermoelectric Cooler Peltier 30mmx30mm TEC1 12704 Elements Moduarr - 1 x Thermoelectric Cooler Peltier. Size: 30 x 30 x 3.2mm. Material: semiconductor. Colour: white. Assembly pressure: 85N/cm2.
- 12V 5.8A 65W TEC1-12706 Thermoelectric Cooler Cooling Peltier Plate Module arr - 1X 12706 Thermoelectric Cooler. QMax (W) : 65W. Cooling piece is very simple to install and use. Size: 40mm x 40mm x 3.8mm. Material: Ceramic. Color : White. Net weight : 22g.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor D4D9 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- 576W 12V Durable Thermoelectric DIY Peltier Cooler Air Cooling Devices - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- High Quality 210W Triple-Core Semiconductor Cooling Fan 12 Volt 18A Height 98mm - 3-Chip 210W Semiconductor Refrigeration Peltier Cooler Air Cooling DIY Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 12V Refrigeration Air Cooler DIY Thermoelectric Peltier Cooling System Fan Kit - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- Profession 4 Chip Refrigerator High Quality Water Cooling System Kit DC 12 Volt - 1 4 Chip Refrigerator. Note: This Set Is Water Cooling Is Not Used to Cool Water. Cooling Power: 170w. Cooling Plate + Fan. Your satis faction is our ultimate goal. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface.
- DIY Semiconductor Cooler Kit Electronic Cooling 12V Power Supply 118*100*68MM - This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. parameter: Working voltage: 12V Maximum power: 72W Maximum current: 4-6A Product size: 118*100*68MM The package includes: 1*DIY semiconductor air cooling kit.
- Electronic Components Triple-Core Semiconductor Cooling Fan Peltier Coolers 210W - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 12V Cooling Fan Thermoelectric Peltier Refrigeration Cooling System DIY Kit New - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- High Quality 288W DC 12V 17A Electronic 4 Chip Refrigerator Peltier Cooler Kit - Maximum power: 288W (15.4V). Your satis faction is our ultimate goal. Cooling power: 170W. TypePeltier Cooler. Note: This set is water cooling is not used to cool water. The hot end uses water circulation to cool the semiconductor hot surface.
- High Quality Electrical Equipment DIY Semiconductor Air Cooling Kit 12V 72W 4-6A - This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. parameter: Working voltage: 12V Maximum power: 72W Maximum current: 4-6A Product size: 118*100*68MM The package includes: 1*DIY semiconductor air cooling kit.
- High-quality Electronic Triple-Core Semiconductor Cooling Fan 210W 12V 18A New - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- Electrical Semiconductor Cooling Fan DIY Peltier Coolers Silent Design 12V 140W - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- High Quality Electrical Equipment DIY Semiconductor Air Cooling Kit 12V 72W 4-6A - This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. parameter: Working voltage: 12V Maximum power: 72W Maximum current: 4-6A Product size: 118*100*68MM The package includes: 1*DIY semiconductor air cooling kit.
- 12V 20A Thermoelectric Peltier Refrigeration Cooling System Cooler Fan 240W New - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A.
- Aquarium Water Chiller Fish Tank Cooler Cooling Machine DC 12V 15A Durable New - Features: 1. The cooler uses high-end refrigeration modules with high power and good durability. 2. The area of the cooling block is larger, so it can contact more water for rapid cooling. 3. The four hollow copper tubes with refrigerant inside will quickly transfer heat, thereby improving cooling efficiency. Specifications: Voltage: DC 12V Power: 180W Current: 15A (180W) Suitable for: 40L fish tank Size: 143 * 96 * 162mm / 5.62 * 3.77 * 6.37" Outer diameter of water inlet/outlet: 8mm / 0.31" Packing including： 1 * Refrigerator Kit.
- Peltier Cooler Refrigeration DIY Semiconductor Air-cooled Kit 12V 72W Durable - This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. Parameter: Working voltage: 12V Maximum power: 72W Maximum current: 4-6A Product size: 118*100*68MM The package includes: 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A .
- 140W Semiconductor Refrigeration Cooling Fan Silent Large air Volume Cooler New - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current RatingUp to 8A；Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V 240W Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 140W Semiconductor Refrigeration Cooling Fan Silent Large air Volume Cooler New - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Thermoelectric Peltier Refrigeration Cooling System Set Cooler Double Fan 12V US - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V Semiconductor Peltier Cooler Refrigeration Thermoelectric Peltier Cooler - 210W Semiconductor Air Cooling Refrigeration Triple-Core Peltier Cooler DIY. Semiconductor refrigerator. Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity.
- 576W Thermoelectric Peltier Cooler Air Cooling DIY 8-Chip 12V For Refrigeration - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse.
- 12V 240W Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V 288W 24A 4 Chip Thermoelectric Peltier Water Radiator Refrigeration Cooler - Maximum power: 288W (15.4V). Maximum current: 24A. Note: This set is water cooling is not used to cool water. 1 4 chip refrigerator. Cooling power: 170W. Cooling plate + fan. The hot end uses water circulation to cool the semiconductor hot surface.
- 576W Thermoelectric Peltier Cooler Air Cooling DIY 8-Chip 12V For Refrigeration - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse.
- Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration 210W - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- High Quality Triple-Core Semiconductor Cooling Fan Peltier Coolers 210W 18A 12V - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 4 Chip Refrigerator Water Cooling Semiconductor Cooling System Kit DC 12V 288W - Maximum power: 288W (15.4V). The hot end uses water circulation to cool the semiconductor hot surface. Note: This set is water cooling is not used to cool water. Cooling power: 170W. Cooling plate + fan.
- 12V 576W 8 Chip Aluminum TEC1-12706 Low Noise Peltier DIY Thermoelectric Cooler - Power: maximum power 576W (8 chip) 15.4 V. 1 PC x DIY Thermoelectric Cooler. Handheld photography kit for DJI Mini 3 Pro drone tripod all-in-one shooting. No refrigerant required: Stable work and low noise, no refrigerant required.
- Peltier Cooler Semiconductor Cooling Fan Air Cooling Refrigeration DIY 210W - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor I2P5 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- TEC1-12706SR 12V 6A Semiconductor Heatsink Thermoelectric Peltier Cooler 40*40mm - Cooler Peltier 1. current: 6A. Wide application: water dispenser, car refrigerator, wine cabinet, chip cooling, freshness, products, etc. Lead wire length: about 200mm (custom wire lengths available).
- TEC1-12706SR 12V 6A Semiconductor Heatsink Thermoelectric Peltier Cooler 40*40mm - Cooler Peltier 1. current: 6A. Wide application: water dispenser, car refrigerator, wine cabinet, chip cooling, freshness, products, etc. Lead wire length: about 200mm (custom wire lengths available).
- TEC1-12706SR 12V 6A Semiconductor Heatsink Thermoelectric Peltier Cooler 40*40mm - Cooler Peltier 1. current: 6A. Wide application: water dispenser, car refrigerator, wine cabinet, chip cooling, freshness, products, etc. Lead wire length: about 200mm (custom wire lengths available).
- 12 V Semiconductor Cooling Fan Peltier Refrigeration Cooler System 140W - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 200*118*98MM Semiconductor Refrigeration Air Dehumidifier Cooling Fan 12V 140W - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current RatingUp to 8A；Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V Refrigeration Plate Cooler Semiconductor Peltier Cold Cooling Fan 240W NEW - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 140W 12V Semiconductor Refrigeration Cooler DIY Peltier Module Cooling Fan Kit - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 140 W 12V Semiconductor Refrigeration Cooling Fan Silent Design Large air Volume - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 240W Three-Chip Semiconductor Refrigeration Cooler DIY Surface Cooling Version - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A.
- DIY Semiconductor Fan Air Cooling System Thermoelectric Cooler 210W 12V USA - 210W Semiconductor Refrigerator Thermoelectric Cooler Tricore Production Kit USA Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- Semiconductor Cooling Fan Refrigeration Cooler DIY Peltier Coolers 12V 140W New - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current RatingUp to 8A；Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Thermoelectric Peltier Refrigeration Cooling System Set Cooler Double Fan 12V US - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Fan DIY Kit 12V - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- Thermoelectric Peltier Refrigeration Cooler Fan Cooling System Large Air Volume - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V Semiconductor Cooling Fan DIY Cooling Module Triple-Core Air-cooled Cooler - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 240W Semiconductor Plate Refrigeration Cooling Cooler Fan System Heatsink Kit - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease.
- Semiconductor Cooler w/Fan Cooling Plate Small Space Refrigeration Device 240W - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease.
- Triple-Core Semiconductor Refrigeration Thermoelectric Peltier Cooler 12 V - 210W Semiconductor Refrigeration Thermoelectric Peltier Cooler Kit Cooler DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 12V Thermoelectric Peltier Refrigeration Cooling System Set Double Fan Cooler - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current RatingUp to 8A；Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 3-Chip Semiconductor Refrigeration Peltier Cooler Cooling Fan Durable 210W - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 12V 240W Refrigeration Plate Cooler Semiconductor Peltier Cold Cooling Fan NEW! - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 12A (conventional 10A) Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Thermoelectric Cooler Refrigeration Semiconductor Peltier Cooling Tool Kit 12V - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease.
- Semiconductor Refrigeration Plate Cooler Peltier Cold Cooling Fan Summer Tool - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease.
- TEC1-12706SR 12V6A Semiconductor Heatsink Thermoelectric Peltier Cooler 40*40mm - Cooler Peltier 1. Wide application: water dispenser, car refrigerator, wine cabinet, chip cooling, freshness, products, etc. Lead wire length: about 200mm (custom wire lengths available). Device characteristics: red line positive, black line negative (lettered side for cooling side, non-lettered side for heat dissipation side).
- TEC1-12706SR 12V6A Semiconductor Heatsink Thermoelectric Peltier Cooler 40*40mm - Cooler Peltier 1. Wide application: water dispenser, car refrigerator, wine cabinet, chip cooling, freshness, products, etc. Lead wire length: about 200mm (custom wire lengths available). Device characteristics: red line positive, black line negative (lettered side for cooling side, non-lettered side for heat dissipation side).
- TEC1-12706SR 12V6A Semiconductor Heatsink Thermoelectric Peltier Cooler 40*40mm - Cooler Peltier 1. Wide application: water dispenser, car refrigerator, wine cabinet, chip cooling, freshness, products, etc. Lead wire length: about 200mm (custom wire lengths available). Device characteristics: red line positive, black line negative (lettered side for cooling side, non-lettered side for heat dissipation side).
- TEC1-12706SR 12V6A Semiconductor Heatsink Thermoelectric Peltier Cooler 40*40mm - Cooler Peltier 1. Wide application: water dispenser, car refrigerator, wine cabinet, chip cooling, freshness, products, etc. Lead wire length: about 200mm (custom wire lengths available). Device characteristics: red line positive, black line negative (lettered side for cooling side, non-lettered side for heat dissipation side).
- New 8 Chip Thermoelectric Peltier Cooler Air Cooling Device 576W With Water Tank - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- Lighting X42 PC Magnetic Peltier Large Size Semiconductor Tablet Cooler Radiator - Magnetic design: easy to install. Product material: pc+abs+ aluminum alloy + pure copper motor + magnet. Plug in the power and start cooling. Length of charging line: 1m.
- Semiconductor Refrigeration Cooler DIY Peltier Module Cooling Fan Kit 140W 12V - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V 20A Thermoelectric Peltier Refrigeration Cooling System Kit DIY Cooler - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 240W Semiconductor Cooler with Fan Refrigeration Thermoelectric Peltier Cooling - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease.
- 4 Chip Refrigerator DIY Thermoelectric Peltier Cooler Water Cooling Device 12V - 1 4 Chip Refrigerator. Note: This Set Is Water Cooling Is Not Used to Cool Water. Cooling Plate + Fan. Cooling Power: 170w. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface.
- Thermoelectric Peltier Cooler Refrigeration DC 12V Semiconductor Air ConditH6 - This semiconductor cooler is a form of solid state cooling that incorporates both semiconductor technologies and electronic assembly techniques. It can be used as a Pet Air Conditioner (chicken, little dog, etc.) or little fridge.
- 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY New - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- TEC1-12706 Thermoelectric Peltier Air Cooling Device Cooler 8 Chip 12V 576W New - Power: 576w. DIY Thermoelectric Peltier Cooler Air Cooling Devices. This air conditioner is a space-cooling blow air-cooling device that is cooled by water. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold.
- 12V DIY Thermoelectric Peltier Refrigeration Air Cooler Cooling System Fan Set - This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. parameter: Working voltage: 12V Maximum power: 72W Maximum current: 4-6A Product size: 118*100*68MM The package includes: 1*DIY semiconductor air cooling kit.
- Thermoelectric Peltier Refrigeration Cooling System Kit DIY Cooler 12V 20A - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- Thermoelectric Power Generation TEG Module 12711-9L31-06CW Custom Thermoelectric - Thermoelectric Power Generation TEG Module 12711-9L31-06CW from Custom Thermoelectric. These are NOS units that are new in the package. You are bidding on ONE module and I have multiple available. I can do discounts on volume if you are interested. Specs on this model can be found by searching the model # on Custom Thermoelectric's website.
- Peltier Cooler Semiconductor Refrigeration Cooling System DIY Kit 12V 6A - ADVANCED TECHNOLOGY-- Semiconductor coolers are a form of solid state cooling. The thermoelectric peltier adopts semiconductor technologies and electronic assembly techniques. WIDE APPLICATION-- This thermoelectric cooler can be widely used for small space cooling, air cooling dehumidification, semiconductor refrigeration learning theory and more.
- 3Pcs Tec1-12705 Semiconductor Refrigeration Tablets Tec1-12705 12V 5A Heatsin... - Alinan 3pcs TEC1-12705 Semiconductor Refrigeration Tablets TEC1-12705 12V 5A Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 40x40MM. We do not accept P.O. Boxes.
- TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Plate 12V 60W White
- Thermoelectric Power Generator Peltier Module TEG SP1848-27145 150℃ 40mm*40mm - 1x TEC1 27145 SP1848. Specifications (Power input when used in Peltier Effect). 40mm x 40mm x 3.4mm. Temperature difference: (℃) (-4) - 120. Can be used for power generation, cooling or heating applications.
- TEC1 SP1848-27145 Tec Thermoelectric 27145 Element Module Plate Peltier - 1x TEC1 27145 SP1848. sie können aber auch für Kühl- und/oder Heizanwendungen eingesetzt werden. Wir werden uns freuen, Ihnen behilflich zu sein. Temperaturunterschied: (℃) (-4) - 120. Sonne und Sonne.
- Thermoelectric Power Generator Peltier Module TEG 40mm*40mm 150℃ SP1848-27145 - 1x TEC1 27145 SP1848. Specifications (Power input when used in Peltier Effect). 40mm x 40mm x 3.4mm. Temperature difference: (℃) (-4) - 120. Can be used for power generation, cooling or heating applications.
- Thermoelectric Generator Peltier Module Teg 40mm 150°C SP1848-27145 - 1x TEC1 27145 SP1848. sie können aber auch für Kühl- und/oder Heizanwendungen eingesetzt werden. Wir werden uns freuen, Ihnen behilflich zu sein. Temperaturunterschied: (℃) (-4) - 120. Sonne und Sonne.
- 1PC TEC1 SP1848-27145 TEC Thermoelectric Heatsink Cooler Peltier Plate Module - 1x TEC1 27145 SP1848. Specifications (Power input when used in Peltier Effect). we very glad to solve all problem with you. Can be used for power generation, cooling or heating applications. but they can also be used for cooling and/or heating applications.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Machine DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- Cooler Semiconductor Refrigeration Water Chiller Cooling System Device (180W) - 120W is suitable for 30L fish tanks and 180W is suitable for 40L fish tank. Power: 120W, 180W (Optional ). Current: 10A(120W), 15A(180W). This thermoelectric cooler uses high-end refrigeration module which has high power and good durability.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat I6F8 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Eleme M7V8 - Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler. Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor X1L7 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY 12V 576W - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- TEC1-12706SR 12V6A Heatsink Thermoelectric Peltier Cooler 40x40mm Semiconductor - Model: TEC1-12706SR. Cooler Peltier 1. Wide application: water dispenser, car refrigerator, wine cabinet, chip cooling, freshness, products, etc. Device characteristics: red line positive, black line negative (lettered side for cooling side, non-lettered side for heat dissipation side).
- TEC1-12706SR 12V6A Semiconductor Heatsink Thermoelectric Peltier Cooler 40x40mm - Cooler Peltier 1. Wide application: water dispenser, car refrigerator, wine cabinet, chip cooling, freshness, products, etc. Lead wire length: about 200mm (custom wire lengths available). Device characteristics: red line positive, black line negative (lettered side for cooling side, non-lettered side for heat dissipation side).
- Triple-Core Peltier Semiconductor Refrigeration Cooling System Cooler - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 3-Chip 210W Semiconductor Refrigeration Peltier Cooler Air Cooling Hotsale! - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- TEC1-12706SR 12V 6A Heatsink Thermoelectric Peltier Cooler 40x40mm Semiconductor - Model: TEC1-12706SR. Cooler Peltier 1. current: 6A. Wide application: water dispenser, car refrigerator, wine cabinet, chip cooling, freshness, products, etc. The side of the product with words is the cooling side, the side of the product without words is the cooling side.
- Semiconductor Refrigeration Thermoelectric Peltier Cold Plate Cooler with Fan 1* - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- TEC1-12706 Heatsink Thermoelectric Cooler Peltier Module Cooling System Kit O5P6 - Install heat sink or -cooled on the heat dissipation side; otherwise will burn the Peltier. Adopt TEC1-12706 semiconductor chilling plate, quality for use. Semiconductor Chilling Plate: TEC1-12706. TEC1-12706: side with words is the refrigeration side, the other side is heat dissipation side.
- 2PCS TEC1-12706 Heatsink Thermoelectric Cooling Plate Module NEW - Here you can enjoy the best service and high quality products we provide for you. We are looking forward to working with you in a friendly way. If there are no special circumstances, your product will not be delayed in arrival.
- TEC1-12706SR Semiconductor Thermoelectric Cooling Module Peltier Cooler 40x40mm - Cooler Peltier 1. Fast cooling, experience the freezing point. Wide application: water dispenser, car refrigerator, wine cabinet, chip cooling, freshness, products, etc. The side of the product with words is the cooling side, the side of the product without words is the cooling side.
- TEC1-12706SR 12V 6A Semiconductor Heatsink Thermoelectric Peltier Cooler 40x40mm - Cooler Peltier 1. current: 6A. Wide application: water dispenser, car refrigerator, wine cabinet, chip cooling, freshness, products, etc. Lead wire length: about 200mm (custom wire lengths available).
- TEC1-12706SR Heatsink Thermoelectric Peltier Cooler 12V 6A 40x40mm - Cooler Peltier 1. current: 6A. Lead wire length: about 200mm (custom wire lengths available). Device characteristics: red line positive, black line negative (lettered side for cooling side, non-lettered side for heat dissipation side).
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan 20A - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 8-Chip Thermoelectric Peltier DIY Cooler Air Water Cooling Device Low Noise 576W - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V 210W Semiconductor Refrigeration Cooler DIY Peltier Module Cooling Fan - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan 20A - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V 4 Chip Thermoelectric Peltier Cooler Water Cooling Refrigeration System USA - Note: This Set Is Water Cooling Is Not Used to Cool Water. 1 4 Chip Refrigerator. Cooling Power: 170w. Cooling Plate + Fan. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface.
- 12V 576W 8-Chip TEC1-12706A DIY Thermoelectric Peltier Cooler Air Cooling Device - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V Thermoelectric Cooler Peltier 240W DIY Refrigeration Cooling System Fan 20A - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 240W Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit New - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V Thermoelectric Cooler Peltier 240W DIY Refrigeration Cooling System Fan 20A - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- Semiconductor Cooling Fan 12v Triple-core Refrigeration Diycooler Peltier Module - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 12V 140W Thermoelectric Peltier Refrigeration DIY Cooling System Cooler Fan Kit - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration Device - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 72W 12V Refrigeration Cooling System Semiconductor Refrigeration Cooler DIY Kit - Power: 72W. Semiconductor coolers are a form of cooling that combines semiconductor technology and electronic assembly technology. Suitable for small space cooling, air cooling dehumidification, semiconductor refrigeration learning for, etc.
- 12V Peltier Semiconductor Refrigeration Cooler Module Cooling System for w/ Fan - Save space, can be installed anywhere, easy to install. DIY Peltier kit includes TEC1-12706 semiconductor cooler and other accessories, compact size. Must fititng heart heat sink radiator when powering on, not repositionable to burn peltier if armchair is not mounted.
- 60W 12V Refrigeration Cooling System Semiconductor Refrigeration Cooler Kit - This semiconductor cooler is a form of cooling that incorporates semiconductor technologies and electronic assembly techniques. 1 x Semiconductor Refrigeration Piece. Adopt the fully enclosed structure, avoid the invasion of water for into the air.
- TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling System Tools Set - Adopt TEC1-12706 semiconductor chilling plate, good quality for use. Refrigeration Power : Max. Conduction Module Size : 60 45 21mm (Approx.). 1 Conduction Module. Great DIY kit for electronic enthusiasts in semiconductor cooling applications.
- 7.8*8.66" 12V 240W Peltier Cold Plate Cooler 4Cold Cooling Plate Cooler with Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease.
- 4 Chip Refrigeration Kit Thermoelectric Peltier Water Cooling Decive Plate + Fan - Cooling Plate + Fan. Note: This Set Is Water Cooling Is Not Used to Cool Water. 1 4 Chip Refrigerator. Cooling Power: 170w. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface.
- Car Battery Charger with LCD Touch Screen Display Repair Charger, EU-St K3V2 - 1 x Autobatterieladegerät. Ausgangsspannung: DC13,8-15,5V. Ausgangsstrom: DC 10 (max.). Spannung: 12V.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat O4S7 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat Q1A7 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- 300W Thermoelectric Peltier Refrigerator DC12V Semiconductor Air Conditioners K E7P9 - 1 x Kühler. Farbe: Wie abgebildet. Größe: 255 mm x 60 mm x 60 mm. Kühlleistung: 300 W.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat Q2P6 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- 300W Thermoelectric Peltier Refrigerator DC12V Semiconductor Air Conditioners K S1Y1 - 1 x Kühler. Farbe: Wie abgebildet. Größe: 255 mm x 60 mm x 60 mm. Kühlleistung: 300 W.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor E7H9 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- 3pcs TEC1-12705 Semiconductor Refrigeration Tablets TEC1-12705 12V 5A Heatsin... - 3pcs TEC1-12705 Semiconductor Refrigeration Tablets TEC1-12705 12V 5A Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 40x40MM.
- 12V Semiconductor Refrigeration Cooler DIY Peltier Module Cooling Fan 210W - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 12V Semiconductor Refrigeration Cooler DIY Peltier Module Cooling Fan 210W - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- Refrigerators 576w Water Cooling System 12V 8 Chip Peltier Cooler Kit NEW - What's Included? 1*Diy Cooler This Product Is Only a Refrigerator, You Need to Prepare the Following Accessories: 1.12v 50a Power Supply 1 (or 12v 30a Power Supply 2) 2.360 Sets of Cooling Water Drains (Including Cooling Fan + Protection Net Cover) 3. Pump One 4. Water Pipe 5m (Inner Diameter 8mm) 5. 10 Buckles (M11), If There Is a Tie, It Can Be Replaced 6. Water Tank One 7. Power Cord 1 8. Connecting Line 1.5 Square Meters 2 Meters (Prevention Line Is Not Long Enough, Extension Line) Specifications Core: 8*Tec1-12706a Cooling Method: Water Cooling Appearance Size: 200*90*60mm Power: 576w Support Space: 1-2 Squares Temperature Difference 8-13 Degrees Celsius Red Line: "+", Black Line: "-" Power Supply Requirements: 12v700w Power Supply.
- 12V 576WThermoelectric Peltier Cooler 8 Chip TEC1-12706 DIY Water Cooler Device - What's Included? 1*Diy Cooler This Product Is Only a Refrigerator, You Need to Prepare the Following Accessories: 1.12v 50a Power Supply 1 (or 12v 30a Power Supply 2) 2.360 Sets of Cooling Water Drains (Including Cooling Fan + Protection Net Cover) 3. Pump One 4. Water Pipe 5m (Inner Diameter 8mm) 5. 10 Buckles (M11), If There Is a Tie, It Can Be Replaced 6. Water Tank One 7. Power Cord 1 8. Connecting Line 1.5 Square Meters 2 Meters (Prevention Line Is Not Long Enough, Extension Line) Specifications Core: 8*Tec1-12706a Cooling Method: Water Cooling Appearance Size: 200*90*60mm Power: 576w Support Space: 1-2 Squares Temperature Difference 8-13 Degrees Celsius Red Line: "+", Black Line: "-" Power Supply Requirements: 12v700w Power Supply.
- 8 Chip TEC1-12706 DIY Thermoelectric Peltier Cooler Water Cooler Device 576W - What's Included? 1*Diy Cooler This Product Is Only a Refrigerator, You Need to Prepare the Following Accessories: 1.12v 50a Power Supply 1 (or 12v 30a Power Supply 2) 2.360 Sets of Cooling Water Drains (Including Cooling Fan + Protection Net Cover) 3. Pump One 4. Water Pipe 5m (Inner Diameter 8mm) 5. 10 Buckles (M11), If There Is a Tie, It Can Be Replaced 6. Water Tank One 7. Power Cord 1 8. Connecting Line 1.5 Square Meters 2 Meters (Prevention Line Is Not Long Enough, Extension Line) Specifications Core: 8*Tec1-12706a Cooling Method: Water Cooling Appearance Size: 200*90*60mm Power: 576w Support Space: 1-2 Squares Temperature Difference 8-13 Degrees Celsius Red Line: "+", Black Line: "-" Power Supply Requirements: 12v700w Power Supply.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 8Chip TEC1-12706 DIY Water Cooler Device 12V 576W Thermoelectric Peltier Cooler - What's Included? 1*Diy Cooler This Product Is Only a Refrigerator, You Need to Prepare the Following Accessories: 1.12v 50a Power Supply 1 (or 12v 30a Power Supply 2) 2.360 Sets of Cooling Water Drains (Including Cooling Fan + Protection Net Cover) 3. Pump One 4. Water Pipe 5m (Inner Diameter 8mm) 5. 10 Buckles (M11), If There Is a Tie, It Can Be Replaced 6. Water Tank One 7. Power Cord 1 8. Connecting Line 1.5 Square Meters 2 Meters (Prevention Line Is Not Long Enough, Extension Line) Specifications Core: 8*Tec1-12706a Cooling Method: Water Cooling Appearance Size: 200*90*60mm Power: 576w Support Space: 1-2 Squares Temperature Difference 8-13 Degrees Celsius Red Line: "+", Black Line: "-" Power Supply Requirements: 12v700w Power Supply.
- 240W Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- Refrigeration Cooler Semiconductor Thermoelectric Cooling Fan 240w Small Space - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- Thermoelectric Peltier Refrigeration Air Cooling System Kits Cooler Fan 12V 4-6A - This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. Parameter: Working voltage: 12V Maximum power: 72W Maximum current: 4-6A Product size: 118*100*68MM The package includes: 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A .
- 12V Thermoelectric Peltier Refrigeration Air Cooling System Cooler Fan DIY Kit - This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. parameter: Working voltage: 12V Maximum power: 72W Maximum current: 4-6A Product size: 118*100*68MM The package includes: 1*DIY semiconductor air cooling kit.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY 12V 576W - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- TEC1-12710 100W TEC1 12710 12V 4A TEC thermoelectric cooler peltier - 1pcs thermoelectric cooler peltier. Operates from 0~15.2V DC and 0~10A. Color: White. Max power consumption: 100 Watts.
- 12V Semiconductor Refrigeration Cooler DIY Peltier Module Cooling Fan Kit 140W - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V New Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY US - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V current RatingUp to 8A；Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit New - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- 12V 576W 8-Chip TEC1-12706A DIY Thermoelectric Peltier Cooler Air Cooling Device - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 210W Semiconductor Refrigerator Thermoelectric Cooler Refrigeration DIY 12 V - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 12V 4 Chip TEC1-12706 Thermoelectric Peltier Water Radiator Refrigeration Cooler - Note: This set is water cooling is not used to cool water. 1 4 chip refrigerator. Cooling power: 170W. Cooling plate + fan. The hot end uses water circulation to cool the semiconductor hot surface.
- Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY 12V - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- New 12V 20A Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Fan - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 210W Air Cooling Refrigeration Semiconductor Peltier Cooler DIY DC12V 18A - Power: Maximum power 210W (3 pieces of excellent 12706 chip). PowerMaximum power 210W (3 pieces of excellent 12706 ch. Maximum current: 18A. Semiconductor refrigerator. Your satis faction is our ultimate goal. ).
- 210W Electronic Semiconductor Fan Air Cooling System Thermoelectric Cooler - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 12V US - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Cooling Device DIY US 12V 576W - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- Semiconductor Refrigeration Peltier Cooling System Cooler Air Cooling Device 12V - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 240W Refrigeration Cooler SemiconductorThermoelectric Cooling Fan Small Space - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 8 Chip TEC1-12706 12V Thermoelectric Peltier Cooler Air Radiator Refrigeration - DIY Thermoelectric Peltier Cooler Air Cooling Devices. Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold.
- 4Chip Refrigeration Kit Thermoelectric Peltier Water Cooling Decive Plate + fan - Product Parameters】 Maximum Power: 288w (15.4v) Maximum Current: 24a Rated Voltage: Dc 12v Current Rating: 17a Cooling Power: 170w Product Size: Length 180mm* Width 65mm* Height 62mm Connection Method: Cooling Plate + Fan Red Line Connected to the Power Supply L2v Positive Black Line Connected to the Power Supply L2v Negative .
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat S5I9 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- Triple-Core Semiconductor Cooling Fan High-quality Refrigeration Chip Efficient - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- Semiconductor Cooling Fan Kit 140W 12V Special Bottom Design Large Air Volume - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 1PC Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Double Fan - 1PC Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Double Fanbrand new and high qualityQuantity: 1pcsColor: as picture showPower: 120WVoltage: 12VCurrent: 10ASize: 200 x 115 x 8.5mm / 7.8 x 4.5 x 3.3inch ( approx )approxThe kit you can made cooling system for yourself.Semiconductor coolers are a form of cooling that incorporates both Semiconductor Technologies and electronic assembly techniques.Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
- TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Eleme B3Q1 - Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler. Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Eleme Q4E1 - Chipmodell: TEC1-12705. 1 x thermoelektrischer Kühler Peltier. Größe: 40 x 40 x 3,8 mm. Material: Halbleiter. Farbe: weiß. Arbeitsumgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wird direkt die Kühleffizienz beeinflussen).
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat A4O4 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Eleme E7M3 - Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler. Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Eleme A5J3 - Chipmodell: TEC1-12705. 1 x thermoelektrischer Kühler Peltier. Größe: 40 x 40 x 3,8 mm. Material: Halbleiter. Farbe: weiß. Arbeitsumgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wird direkt die Kühleffizienz beeinflussen).
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor M9M3 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat S6K4 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- 50W Thermoelectric Cooler Semiconductor Refrigeration System Set for 15L Water - This 15L water cooler can reduce the water temperature to 8-10 degrees normal temperature. 1 thermoelectric cooler only, other accessories demo in the picture is not included! 1 x Thermoelectric Cooler.
- 12V 60W Thermoelectric Peltier Electric Refrigeration Semiconductor Cooling Kit - This semiconductor cooler is a form of cooling that incorporates semiconductor technologies and electronic assembly techniques. 1 x Semiconductor Refrigeration Piece. 1 x Radiator. note: This product has been assembled.
- for 12V Peltie Semiconductor Cooler Radiator Air Cooling Device Refrigeration - Semiconductor coolers are a form of cooling that incorporates both semiconductor Technologies and electronic assembly techniques. Must fititng Radiator Heatsink when Power ON,not resposible for Burn Peltier if Heatsink is not Assemble.
- for 12V Semiconductor Air cooling Device Radiator with Fan Thermoelectric Coo - An excellent DIY kit for electronic enthusiasts in semiconductor refrigeration applications, suitable for computer radiators and cooling in small spaces. Using high-quality aluminum + TEC1-12706 semiconductor cooling plate, durable.
- 1PC TES1-12702 Thermoelectric Heatsink Cooler Peltier Plate Module - Ideal for cooling down semiconductor devices. - Size: Approx. 1X TES1-12702. 1 pair Sandbag Punch Training Kids Children Boxing Gloves Boys/Girls Fight. 1:5 / 1:8 For Hardwood & Softwood Woodworking Dovetail Marker Marking Gauge.
- TEC1-12709 Thermoelectric Cooler Heatsink Peltier Module 40mm 12V 9A - 1 x TEC1-12709 Thermoelectric Cooler. MPN : Does Not Apply. Item Specifics. Tmax (°C) : 67. Imax (A) : 7. Umax (V) : 15.4. Couples : 127. Model : TEC1-12709.
- TEC1-12705 Heat Sink Thermoelectric Cooler Cooling Peltier Plate Module 40 x 40m - 1 x TEC1-12705 cooler plate module. Size: 40 x 40 x 3.8mm. Top USA Distributor. 1 Set Slimming machine lazy slimming thin belly slimming belt massage belt. 1:5 / 1:8 For Hardwood & Softwood Woodworking Dovetail Marker Marking Gauge.
- TEC1-12712 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module - Max cooling power: 109W. Size: 40mm x 40mm x 3.3mm. Model: TEC1-12712("TE" is the abbreviation of Thermo-Electric). Computers/Tablets & Networking. Operates from -50 °C to +100 °C. 1 pair Sandbag Punch Training Kids Children Boxing Gloves Boys/Girls Fight.
- TEC1-12708 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 40*40MM - Enables reduced, low-noises operation of cooling fans, while providing greater cooling power. 40 x 40 x 3.6mm (L W H). Can provide cooling below ambient temperature. Suitable for manufacture in small size.
- New TEC1-12710 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module - New List Item. Semiconductor material is sandwiched between the ceramic plates. Incorporate both semiconductor technologies and electronic assembly techniques. Computers/Tablets & Networking. Used for many applications from CPU coolers to alternate power sources.
- TEC1-12704 40x40mm Thermoelectric Cooler Peltier Plate Module 15V CPU - 1 Piece Thermoelectric Cooler. - Size: Approx. 1 Set Slimming machine lazy slimming thin belly slimming belt massage belt. - Material: Ceramic. Travel Accessories. 1:5 / 1:8 For Hardwood & Softwood Woodworking Dovetail Marker Marking Gauge.
- 12V 288W 24A 4 Chip Thermoelectric Peltier Water Radiator Refrigeration Cooler - Maximum power: 288W (15.4V). Maximum current: 24A. Note: This set is water cooling is not used to cool water. 1 4 chip refrigerator. Cooling power: 170W. Cooling plate + fan. The hot end uses water circulation to cool the semiconductor hot surface.
- 240w Refrigeration Cooler Semiconductor Thermoelectric Peltier Cold Plate Cooler - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 12V Semiconductor Refrigeration Cooler Fan Peltier Module Cooling Device 210W - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 8 Chip TEC1-12706 12V Thermoelectric Peltier Air Radiator Refrigeration Cooler! - DIY Thermoelectric Peltier Cooler Air Cooling Devices. Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold.
- 12V 576W 8-Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device New - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- Refrigeration Plate Cooler Semiconductor Peltier Cold Cooling Fan 240W 12V New - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- TEC1-12705 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module UK
- 12V 8-Chip Thermoelectric Peltier Cooler Air Cooling Device DIY Kit TEC1-12706A - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees.
- Electronic Components 4 Chip Refrigerator Thermoelectric Peltier Coolers 288W - Maximum power: 288W (15.4V). Your satis faction is our ultimate goal. Note: This set is water cooling is not used to cool water. The hot end uses water circulation to cool the semiconductor hot surface.
- Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Fan 12V 20A USA - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- Electronic 4 Chip Refrigeration Water Cooling System Kit Peltier Coolers 288W US - Maximum power: 288W (15.4V). Note: This set is water cooling is not used to cool water. 1 4 chip refrigerator. Cooling power: 170W. Cooling plate + fan. The hot end uses water circulation to cool the semiconductor hot surface.
- 12V 20A Thermoelectric Peltier Refrigeration Cooling System Cooler Fan 240W USA - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A.
- 12V 240W Semiconductor Refrigeration Thermoelectric Peltier Cooler Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- Profession 4 Chip Refrigerator High Quality Water Cooling System Kit DC 12 Volt - 1 4 Chip Refrigerator. Note: This Set Is Water Cooling Is Not Used to Cool Water. Cooling Power: 170w. Cooling Plate + Fan. Your satis faction is our ultimate goal. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface.
- High Quality 210W Triple-Core Semiconductor Cooling Fan 12 Volt 18A Height 98mm - 3-Chip 210W Semiconductor Refrigeration Peltier Cooler Air Cooling DIY Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- Electronic Components Triple-Core Semiconductor Cooling Fan Cooling Function 12V - 210W Semiconductor Refrigerator Thermoelectric Cooler Tricore Production Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 240w 12V Semiconductor Peltier Refrigeration DIY Thermoelectric Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- Quality 4 Chip Refrigerator Water Cooling System Kit DC 12V 288W Peltier Cooler - Maximum power: 288W (15.4V). Note: This set is water cooling is not used to cool water. Cooling power: 170W. Cooling plate + fan. Your satis faction is our ultimate goal. The hot end uses water circulation to cool the semiconductor hot surface.
- 4chip 12V 288W Semiconductor Refrigeration DIY Water-cooled Water Cooling System - Maximum power: 288W (15.4V). The hot end uses water circulation to cool the semiconductor hot surface. Note: This set is water cooling is not used to cool water. Cooling power: 170W. Cooling plate + fan.
- 210W Triple-Core Semiconductor Refrigerator Power Cooler Air Cooling Device 12 V - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Elements D7 - 1 x Thermoelectric Cooler Peltier. Size: 40 x 40 x 3.8mm. Material: semiconductor. Colour: white.
- TEC1-12704 Thermoelectric Cooler Peltier 30mmx30mm TEC1 12704 Elements ModuY2 - 1 x Thermoelectric Cooler Peltier. Size: 30 x 30 x 3.2mm. Material: semiconductor. Colour: white. Assembly pressure: 85N/cm2.
- 12V 60W CompleteCooling Kit Electric Refrigeration Semiconductor Cooler Mod O3D7 - This semiconductor cooler is a form of solid state cooling that incorporates semiconductor technologies and electronic assembly techniques. 1 x Semiconductor Refrigeration Piece. : "+", black line: "-".
- 4 Chip Semiconductor Refrigeration Kit Thermoelectric Water Cooling System USA - The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface. Note: This Set Is Water Cooling Is Not Used to Cool Water. 1 4 Chip Refrigerator. Cooling Power: 170w. Cooling Plate + Fan.
- Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 12V 140W - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Surface Mount Thermoelectric Cooler Peltier Module 40x40mm 12V TEC1 12706to12715 - Cooling capacity:29.7W. Since they consit primarily of semiconductor material sandwiched between ceramic plates and have no moving parts. Each device is full inspected and tested. Rated current:3A.
- 72W 12 Volt 118*100*68mm DIY Semiconductor Air Cooling Kit Fluorine-free Durable - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- Semiconductor Refrigeration Peltier Cooler Fan Refrigeration Cooling System Kit - 240w Semiconductor Refrigeration Thermoelectric Peltier Cold Plate Cooler W/Fan. 240w Semiconductor Cooler with Fan. How to Use: Place the Cooling Product on the Smooth Surface of the Semiconductor Refrigeration Plate.
- 12V Cooling Semiconductor 72W Refrigeration System Air Conditioning Cooling G7A3 - Power Consumption: 72W. High cooling efficiency, easily cooling down within 20 minutes. You can make cooling system for yourself, easy and funny. 1 x Cooling System Kit. Mini air conditioner for pet or little fridge.
- 144W Thermoelectric Peltier Refrigeration Cooler 12V Semiconductor Air Cond F2R6 - Maximum power: 144W. Cooling power: 100W. 1 Air Conditioner Cooling System. Size: 51x91x55mm.
- 12V 140W Thermoelectric Peltier Refrigeration DIY Cooling System Cooler Fan Kit - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current RatingUp to 8A；Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 8-Chip TEC1-12706 Thermoelectric Peltier Air Radiator Refrigeration Cooler 12V - DIY Thermoelectric Peltier Cooler Air Cooling Devices. Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold.
- 12V Cooling System Cooler Fan Kit Thermoelectric Peltier Refrigeration - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V 240W Refrigeration Cooling System Fan Kit Thermoelectric Cooler Peltier - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V 8 Chip DIY Thermoelectric Peltier Cooler Air Cooling Device 576W TEC1-12706 - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 10pcs 12V 60W TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Module - These TEC1-12706 60W 12V Peltier thermoelectric coolers are perfect for application. 10 x Peltier Pad. - Maximum Refrigeration Power Qcmax at △Tmax: 60W. As with all TECs, this cooler must be mounted to a heatsink before applying power to it.
- 10PCS TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Module 12V 60W - These TEC1-12706 60W 12V Peltier thermoelectric coolers are perfect for application. 10 x Peltier Pad. - Maximum Refrigeration Power Qcmax at △Tmax: 60W. As with all TECs, this cooler must be mounted to a heatsink before applying power to it.
- 10PCS TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Module 12V 60W - These TEC1-12706 60W 12V Peltier thermoelectric coolers are perfect for application. 10 x Peltier Pad. - Maximum Refrigeration Power Qcmax at △Tmax: 60W. As with all TECs, this cooler must be mounted to a heatsink before applying power to it.
- 12V 60W TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Module 10pcs - These TEC1-12706 60W 12V Peltier thermoelectric coolers are perfect for application. 10 x Peltier Pad. - Maximum Refrigeration Power Qcmax at △Tmax: 60W. As with all TECs, this cooler must be mounted to a heatsink before applying power to it.
- 10pcs 12V 60W TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Module - These TEC1-12706 60W 12V Peltier thermoelectric coolers are perfect for application. 10 x Peltier Pad. - Maximum Refrigeration Power Qcmax at △Tmax: 60W. As with all TECs, this cooler must be mounted to a heatsink before applying power to it.
- 12V 60W TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Module 10pcs - These TEC1-12706 60W 12V Peltier thermoelectric coolers are perfect for application. 10 x Peltier Pad. - Maximum Refrigeration Power Qcmax at △Tmax: 60W. As with all TECs, this cooler must be mounted to a heatsink before applying power to it.
- TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Module 12V 60W 10pcs - These TEC1-12706 60W 12V Peltier thermoelectric coolers are perfect for application. 10 x Peltier Pad. - Maximum Refrigeration Power Qcmax at △Tmax: 60W. As with all TECs, this cooler must be mounted to a heatsink before applying power to it.
- TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Module 12V 60W 10pcs - These TEC1-12706 60W 12V Peltier thermoelectric coolers are perfect for application. 10 x Peltier Pad. - Maximum Refrigeration Power Qcmax at △Tmax: 60W. As with all TECs, this cooler must be mounted to a heatsink before applying power to it.
- 210W Cooling Fan Peltier Cooler Semiconductor Air Cooling Refrigeration 12V - 12V 210W Peltier Cooler Semiconductor Cooling Fan Air Cooling Refrigeration. Power: Maximum power 210W (3 pieces of excellent 12706 chip). Semiconductor refrigerator. Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 240w Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 12V 576W 8-Chip TEC1-12706A Thermoelectric Peltier Cooler Air Cooling Device New - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- DIY-Kit TEC1-12706,Thermoelectric Peltier Module Water Cooler Cooling System - Adopt TEC1-12706 semiconductor chilling plate, good quality for use. Refrigeration Power : Max. Great DIY kit for electronic enthusiasts in semiconductor cooling applications. Conduction Module Size : 60 45 21mm (Approx.).
- Peltier Cooler 8Chip TEC1-12706 DIY Water Cooler Machine 12V 576W Thermoelectric - What's Included? 1*Diy Cooler This Product Is Only a Refrigerator, You Need to Prepare the Following Accessories: 1.12v 50a Power Supply 1 (or 12v 30a Power Supply 2) 2.360 Sets of Cooling Water Drains (Including Cooling Fan + Protection Net Cover) 3. Pump One 4. Water Pipe 5m (Inner Diameter 8mm) 5. 10 Buckles (M11), If There Is a Tie, It Can Be Replaced 6. Water Tank One 7. Power Cord 1 8. Connecting Line 1.5 Square Meters 2 Meters (Prevention Line Is Not Long Enough, Extension Line) Specifications Core: 8*Tec1-12706a Cooling Method: Water Cooling Appearance Size: 200*90*60mm Power: 576w Support Space: 1-2 Squares Temperature Difference 8-13 Degrees Celsius Red Line: "+", Black Line: "-" Power Supply Requirements: 12v700w Power Supply.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit New - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Peltier Thermoelectric Cooler DC12V 30A Semiconductor Air Conditioning Cooling System H2U6 - Strom: 30A. Farbe:Wie abgebildet. Kühlleistung: 170W.
- TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Eleme X8K3 - Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler. Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 240W 12V Semiconductor Refrigeration Machine Cooler Radiator Electronic Cooling - Power : 240W. Semiconductor refrigeration is a kind of refrigeration technology which produces negative thermal resistance, which is characterized by non-moving parts and high reliability. Red line: "+", Black line: "-".
- Car Battery Charger with LCD Touch Screen Display Repair Charger, EU-St L9P3 - 1 x Autobatterieladegerät. Ausgangsspannung: DC13,8-15,5V. Ausgangsstrom: DC 10 (max.). Spannung: 12V.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat B8S2 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- 300W Thermoelectric Peltier Refrigerator DC12V Semiconductor Air Conditioners K J1E7 - 1 x Kühler. Farbe: Wie abgebildet. Größe: 255 mm x 60 mm x 60 mm. Kühlleistung: 300 W.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor E6M5 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- 300W Thermoelectric Peltier Refrigerator DC12V Semiconductor Air Conditioners K P8X2 - 1 x Kühler. Farbe: Wie abgebildet. Größe: 255 mm x 60 mm x 60 mm. Kühlleistung: 300 W.
- 300W Thermoelectric Peltier Refrigerator DC12V Semiconductor Air Conditioners K H6Q6 - 1 x Kühler. Farbe: Wie abgebildet. Größe: 255 mm x 60 mm x 60 mm. Kühlleistung: 300 W.
- DIY Thermoelectric Cooler Cooling System Semiconductor Refrigeration System Y5X6 - Feature1: Thermoelectric Refrigeration. Feature2: Thermoelectric Cooling System. Feature3: Semiconductor Refrigeration. Premium semiconductor cooler with super power and long durability. Model Number: Semiconductor Cooler.
- Refrigeration Cooling Device Kit Electron Semiconductor Cooler Plate Radiator - 1 x Fixing Board. 1 x Radiator Fan. 1 x Cooling Fan. 1 x Cooling Plate-12705. 1 x Heat Insulated Pad. Item Size: 12 10 9cm / 4.72 3.93 3.54in. Rated Power: 50W.
- 300W Thermoelectric Peltier Cooling Cooler DC12V Semiconductor Air Conditioners K K3E3 - 1 x Kühler. Farbe: Wie abgebildet. Größe: 255 mm x 60 mm x 60 mm. Kühlleistung: 300 W.
- Semiconductor Refrigeration Cooling Device Thermoelectric Cooler Mini Fridge - This thermoelectric cooler uses 12715 refrigeration module which has better cooling effect. 1 x Thermoelectric Cooler. It can be used to make small fridge, mini air conditioner or cooling device for pet.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor N2V5 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- 12V Semiconductor Refrigeration Cooler DIY Peltier Cooler Air Cooling Fan 210W - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 12V Semiconductor Refrigeration Cooler DIY Peltier Module Fast Cooling Fan 210W - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 576W 8-Chip TEC1-12706A DIY Thermoelectric Peltier Cooler Air Cooling Device TOP - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 10x Thermoelectric Power Generator SP1848-27145 Peltier TEG Module 40x40mm US - 10 x Thermoelectric Power Generator. Conductivity (σ): 850～1250Ω-1. Thermal conductivity (K): 15～16×10-3-W/℃cm. The red wire is connected to the positive electrode, and the black wire is connected to the negative electrode.
- 12V 240W Thermoelectric Peltier Refrigeration Cooling System Kit Cooler W/ 4 Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 8 Chip TEC1-12706 12V Thermoelectric Peltier Air Radiator Refrigeration Cooler! - DIY Thermoelectric Peltier Cooler Air Cooling Devices. Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold.
- DIY 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V 4 Chip Thermoelectric Peltier Cooler Water Cooling Refrigeration System New - Note: This Set Is Water Cooling Is Not Used to Cool Water. 1 4 Chip Refrigerator. Cooling Power: 170w. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface. Cooling Plate + Fan.
- 240w Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- Semiconductor Refrigeration Plate Cooler Cold Cooling Fan Summer 140W - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 576W 8-Chip TEC1-12706A DIY Thermoelectric Peltier Cooler Air Cooling Device TOP - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 3pcs TEC1-12705 Semiconductor Refrigeration Tablets TEC1-12705 12V 5A Heatsin... - 3pcs TEC1-12705 Semiconductor Refrigeration Tablets TEC1-12705 12V 5A Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 40x40MM.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit New - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Thermoelectric Peltier Refrigeration Cooling Fan System Cooler Fan DIY Kit 12V - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 3pcs TEC1-12705 Semiconductor Refrigeration Tablets TEC1-12705 12V 5A Heatsin... - 3pcs TEC1-12705 Semiconductor Refrigeration Tablets TEC1-12705 12V 5A Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 40x40MM.
- TEC1-12710 100W TEC1 12710 12V 10A TEC thermoelectric cooler peltier H-ml - 1pcs thermoelectric cooler peltier. Operates from 0~15.2V DC and 0~10A. Operates Temperature: -30 to 70. Color: White.
- 576W 12V Durable Thermoelectric DIY Peltier Cooler Air Cooling Devices - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse.
- 3pcs TEC1-12705 Semiconductor Refrigeration TEC1-12705 12V 5A Heatsink Thermo... - 3pcs TEC1-12705 Semiconductor Refrigeration TEC1-12705 12V 5A Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 40x40MM.
- Tec112709 Thermoelectric Cooler Peltier 90w 138.6wmax - TEC1-12709 Thermoelectric Cooler Peltier 12V 90W. The order will be processed and completed by automatic warehouse system within 5 minutes.
- 12V Refrigeration Air Cooler DIY Thermoelectric Peltier Cooling System Fan Kit - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- 12V Semiconductor Refrigeration Cooler DIY Peltier Module Cooling Fan 210W - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 576W 12V Durable Thermoelectric DIY Peltier Cooler Air Cooling Devices HOT - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan 240w - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 300W Thermoelectric Peltier Refrigeration Cooler DC12V Semiconductor Air Co R1Q4 - Cooling power: 300W. Maximum power: 360W. Size: 255mm x 60mm x 60mm.
- 576W 12V Durable Thermoelectric DIY Peltier Cooler Air Cooling Devices USA - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 240W - It adopts dual-chip cooling. The area of the cooling board is 200 100MM., Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop.
- 240W Thermoelectric Cooler Peltier Refrigeration Cooling System Cooler Fan Kit - 12V 240W Dual-Chip Semiconductor Refrigeration Cooler DIY Radiator Cooling Device. It adopts dual-chip cooling. The area of the cooling board is 200 100MM., Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Set - It adopts dual-chip cooling. The area of the cooling board is 200 100MM., Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop.
- 12V 6A Thermoelectric Peltier Semiconductor Cooler Refrigeration Cooling SyB7 - Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor Technologies and electronic assembly techniques. Application for small space cooling, air cooling dehumidification, semiconductor refrigeration learning etc.
- 12V Peltier Cooler DIY Semiconductor Cooling Fan Air Cooling Refrigeration Kit - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V Semiconductor Peltier Cooler Refrigeration Thermoelectric Peltier Cooler - Semiconductor cooling fan. Triple-Core semiconductor cooling fan. 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity. Maximum power 210W (3 pieces of excellent 12706 chip).
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- M.2 Heatsink SSD Cooler for PS5 PCIE NVME or SATA m2 2280 black - ❤Easy to Install —fixed screws on two side, for kinds of M.2 SSD.. ❤Double-sided cooling—Aluminum alloy-Groove design, greatly increase the heat dissipation area, with 10°C - 30°C cooling effect. Mounting Type: Tabletop.
- High Quality Triple-Core Semiconductor Cooling Fan Peltier Coolers 210W 12V 18A - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 80W TEC1-12709 TEC Thermoelectric Cooler Peltier 12V9A - MPN : Does Not Apply. Item Specifics. Ohm:1.3 - 1.5. Type Number: TEC1-12709. 1 Set Slimming machine lazy slimming thin belly slimming belt massage belt. 1:5 / 1:8 For Hardwood & Softwood Woodworking Dovetail Marker Marking Gauge.
- TEC1 SP1848-27145 TEC Thermoelectric Heatsink Cooler Peltier Plate Module - Specifications (Power input when used in Peltier Effect). but they can also be used for cooling and/or heating applications. Can be used for power generation, cooling or heating applications. These modules are manufactured specifically for power generation.
- GRAUGEAR PS5 Heatsink SSD Cover Set, M.2 NVMe Heatsink, Metal Heat... - Manufacturer : GRAUGEAR. 【Copper Heat Pipe】Copper heat pipes provides maximum cooling performance by using DTH(Direct Touch Heat).
- Semiconductor Air Cooler Kit Air Cooler Small Refrigerator Fluorine-free 72W 12V - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- 1pc Thermoelectric Cooler Peltier Cells Peltier Elemente Module TEC1-12705 New
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor R8Y9 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- 3X (DIY Kit TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling System - Adopt TEC1-12706 Halbleiter Kuehlplatte, gute Qualitaet fuer den Einsatz. Halbleiterkuehlplatte: TEC1-12706. Versiegelungsprozess: Standard 704 Silikongummi, der alle Seiten versiegelt. Dieses DIY-Kit koennte genau Ihrem Geschmack sein.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Cooler R3O4 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- 12V Thermoelectric Semiconductor Cooler Peltier Refrigeration Air Cooling 140W - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 1pcs DIY 120W TEC Peltier Semiconductor Refrigerator Water Cooling Air Conditioner M3A6 - Starker wassergekuehlter Klimaanlagenkuehler. Diese Klimaanlage ist ein Raum zum Kuehlen und Blasen von Klimaanlagen. Der Hauptmotor dient zur Kuehlung des Wassers.Es ist heiss, nicht kalt. Leistung: 120W.
- DIY Electric Cooler Cooling System Semiconductor Cooling System Kit Cooling Cooler C8V7 - Feature1: Thermoelektrische Kühlung. Premium Halbleiterkühler mit super Leistung und langer Lebensdauer. Dieser 15L Wasserkühler kann die Temperatur auf 8-10 Grad unter die normale Temperatur senken.
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier ElementsT2A2 - Chipmodell: TEC1-12705. 1 x thermoelektrischer Kühler Peltier. Größe: 40 x 40 x 3,8 mm. Material: Halbleiter. Farbe: weiß. Arbeitsumgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wird direkt die Kühleffizienz beeinflussen).
- TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Eleme F2U1 - Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler. Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- 12V 5.8A 65W TEC1-12706 Thermoelectric Cooler Cooling Peltier Plate Module U5V8 - 1X 12706 Thermoelectric Cooler. QMax (W) : 65W. Cooling piece is very simple to install and use. Size: 40mm x 40mm x 3.8mm. Material: Ceramic. Color : White. Net weight : 22g.
- 3X (TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Element - 3X(Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler). Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt. Arbeiten Umgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wirkt sich direkt auf die Kühleffizienz aus).
- 2X (DIY Kit TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling System - Adopt TEC1-12706 Halbleiter Kuehlplatte, gute Qualitaet fuer den Einsatz. Halbleiterkuehlplatte: TEC1-12706. Versiegelungsprozess: Standard 704 Silikongummi, der alle Seiten versiegelt. Dieses DIY-Kit koennte genau Ihrem Geschmack sein.
- 2X (TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Element - 2X(Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler). Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt. Arbeiten Umgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wirkt sich direkt auf die Kühleffizienz aus).
- DC 12V 5A Semiconductor Refrigerator Thermoelectric Cooler Thermoelectric Pel... - Applicable to cooling small rooms, air cooling dehumidification, learning semiconductor refrigeration theory, etc. 1×Semiconductor Refrigeration Kit. Applicable to cooling small rooms, air cooling dehumidification, learning semiconductor refrigeration theory, etc,and You can use it to DIY small fridge, mini air conditioner or cooling device.
- DC 12V 20A Thermoelectric Peltier Cooler Refrigeration Cooling Fan System, Se... - Cooling Fan: Peltier refrigeration cooling system uses a fan to dissipate heat, which is fast and practical, and easy to use.
- 576W Peltier Cooler 8 Chip TEC1-12706 DIY Water Cooler Device 12V Thermoelectric - What's Included? 1*Diy Cooler This Product Is Only a Refrigerator, You Need to Prepare the Following Accessories: 1.12v 50a Power Supply 1 (or 12v 30a Power Supply 2) 2.360 Sets of Cooling Water Drains (Including Cooling Fan + Protection Net Cover) 3. Pump One 4. Water Pipe 5m (Inner Diameter 8mm) 5. 10 Buckles (M11), If There Is a Tie, It Can Be Replaced 6. Water Tank One 7. Power Cord 1 8. Connecting Line 1.5 Square Meters 2 Meters (Prevention Line Is Not Long Enough, Extension Line) Specifications Core: 8*Tec1-12706a Cooling Method: Water Cooling Appearance Size: 200*90*60mm Power: 576w Support Space: 1-2 Squares Temperature Difference 8-13 Degrees Celsius Red Line: "+", Black Line: "-" Power Supply Requirements: 12v700w Power Supply.
- Refrigeration Plate Cooler Semiconductor Peltier Cold Cooling Fan 240W Durable - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 4-Chip Semiconductor Refrigeration DIY Water Cooling Device DC12V USA - The hot end uses water circulation to cool the semiconductor hot surface. Cooling plate + fan. Note: This set is water cooling is not used to cool water. 1 4 chip refrigerator. Cooling power: 170W.
- 12V Thermoelectric Module Refrigeration Fan Air Cooler Cooling System DIY Kit US - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- 50W Thermoelectric Cooler Semiconductor Refrigeration System Set for 15L Water - This 15L water cooler can reduce the water temperature to 8-10 degrees normal temperature. 1 thermoelectric cooler only, other accessories demo in the picture is not included! 1 x Thermoelectric Cooler.
- 12V 4 Chip Thermoelectric Peltier Cooler Water Cooling Refrigeration System USA - Note: This Set Is Water Cooling Is Not Used to Cool Water. 1 4 Chip Refrigerator. Cooling Power: 170w. Cooling Plate + Fan. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface.
- Peltier Cooler Semiconductor Refrigeration Cooling Fan Module DIY Dehumidifier - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- 4 Chip Semiconductor Refrigeration Thermoelectric Peltier Water Cooling Kit 12V - 4 Chip Semiconductor Refrigeration Thermoelectric Peltier Water Cooling Kit 170W Maximum power: 288W (15.4V) Maximum current: 24A Rated voltage: DC 12V Current Rating: 17A Cooling power: 170W Product size: length 180MM* width 65MM* height 62MM Note: This set is water cooling is not used to cool water Connection method: Cooling plate + fan Red line connected to the power supply 12V positive Black line connected to the power supply 12V negative Features: * 2 calibers are 9mm, and can be connected to the inner diameter of 8nn water pipes. * The hot end uses water circulation to cool the semiconductor hot surface. *Connection method The package includes: 1*4 chip refrigerator .
- Thermoelectric 12V Peltier Cooler Refrigeration Cooling Fan System DIY Kit US - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Semiconductor Refrigeration Peltier Cooler DIY Cooling Fan Module Kit 140W 12V - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 12A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V Semiconductor Refrigeration Peltier Cooler Cooling Fan Air Dehumidifier 140W - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 12A (conventional 10A) Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Peltier Cooler DIY Semiconductor Refrigeration Cooling Fan Module Dehumidifier - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 12A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 240W 12V Thermoelectric Cooler Peltier Refrigeration Cooling System Fan Kit USA - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- High Quality Semiconductor 4-Chip Refrigerator Peltier Cooler 170W DC 12V 24A - Cooling power: 170W. Maximum current: 24A. Maximum Cooling Power (Qcmax)170W. The hot end uses water circulation to cool the semiconductor hot surface. Your satis faction is our ultimate goal. Maximum power: 288W (15.4V).
- 576W DIY Thermoelectric Peltier Cooler 8-Chip TEC1-12706A Air Cooling Device TOP - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse.
- 12V Peltier Cooler DIY Semiconductor Cooling Fan Air Cooling Refrigeration Kit - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 12A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- New 240W Semiconductor Refrigeration Peltier 4 Cold Cooling Plate Cooler Fan 12V - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 12V 170W 4 Chip Semiconductor Radiator Conditioning Refrigeration Water Cooling - Cooling power: 170W. Maximum Cooling Power (Qcmax)170W. The hot end uses water circulation to cool the semiconductor hot surface. Note: This set is water cooling is not used to cool water. 1 4 chip refrigerator.
- 3-Chip Electronic Semiconductor Cooler Refrigerator Peltier Cooling Radiator 12V - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- DC12V 288W Thermoelectric Cooling Module Semiconductor A/C Cooling System DIYS6 - 1 x Kühlmodul. Farbe: Wie abgebildet. Material: Aluminium. Kühlleistung: 170 W.
- 2pcs TEC1-12706 Semiconductor Refrigeration Tablets TEC1-12706 12V - Otherwise the overheating will burn it out.
- 12V 72W Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Fan US - This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. parameter: Working voltage: 12V Maximum power: 72W Maximum current: 4-6A Product size: 118*100*68MM The package includes: 1*DIY semiconductor air cooling kit.
- 12V Refrigeration Plate Cooler Semiconductor Peltier Cold Cooling Fan 240W Sale - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Set - (12v 240w Dual-chip Semiconductor Refrigeration Cooler Diy Radiator Cooling Device. ❖ Maximum Power: 240w. Diy Semiconductor Surface Cooling Version. 1 Diy Semiconductor Surface Cooling Version. 3)It AdoptsDual-chip Cooling.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit New - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V Thermoelectric Peltier Cooler Semiconductor Refrigeration Cooling Fan 200mm - 12V Semiconductor Refrigeration DIY Peltier Cooler Cooling Fan Module Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Feature: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type:Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A；Current: Up to 8A ❖ Product Size:200MM (Length)*118MM (Width)*98MM (Height ) Power supply requirement description: Power supply above 12V15A The package includes: ✔ 1x Cooling Fan.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 576W 12V 8-Chip TEC1-12706A DIY Thermoelectric Peltier Cooler Air Cooling Device - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 8-Chip Thermoelectric Peltier Module Water Cooler Cooling DIY Fan Set TEC1-12706 - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse.
- 4Pcs 40X40mm Thermoelectric Generator SP1848-27145 Peltier TEG Module V5L3 - 4 x SP1848-27145 Peltier TEG Module. and high quality. Soldering agent is low temperature solder (Tin-Bismuth Alloy).
- DC12V 288W Thermoelectric Cooling Module Semiconductor A/C Cooling System DIYS8 - 1 x Kühlmodul. Farbe: Wie abgebildet. Material: Aluminium. Kühlleistung: 170 W.
- DIY Air Cooling Device 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler 12V - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse.
- Thermoelectric Peltier Refrigeration Cooling System Set Cooler Double Fan 12V US - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- 1PCS White TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier 12V 5A - (1 x TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 12V 60W. Refrigeration power: Qcmax 50-60 w. we will be happy to assist you. We work hard. excluded.).
- Durable Thermoelectric Cooler Heatsink 65 ° Cooling TEC1-12715 Thermoelectric - 1 TEC1-12715 Heatsink. Maximum temperature difference : 65 °. Made of high quality material, durable and practical to use. (No matter whether it is water-cooled or air-cooled, apply thermal grease). A heat sink or a water-cooled heat sink must be installed on the heat sink surface, otherwise it will burn out.
- 1*TEC1-12715 Heatsink Thermoelectric Cooling Peltier Plate Module 12-15.4V 15A - Rated current : 15A. 1 TEC1-12715 Heatsink. Refrigeratory capacity : 134W. Small in size, light in weight. Size: 40mm x 40mm x 3.3mm. A heat sink or a water-cooled heat sink must be installed on the heat sink surface, otherwise it will burn out.
- 1*TEC1-12715 Heatsink Thermoelectric Cooling Peltier Plate Module 12-15.4V 15A - Rated current : 15A. 1 TEC1-12715 Heatsink. Refrigeratory capacity : 134W. Small in size, light in weight. Size: 40mm x 40mm x 3.3mm. A heat sink or a water-cooled heat sink must be installed on the heat sink surface, otherwise it will burn out.
- 2PCS TEC1-12706 12V 60W Heatsink Thermoelectric Cooler Cooling Peltier Plate
- 300W Thermoelectric Peltier Refrigerator DC12V Semiconductor Air Conditioners K Z4E8 - 1 x Kühler. Farbe: Wie abgebildet. Größe: 255 mm x 60 mm x 60 mm. Kühlleistung: 300 W.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat G2J7 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor H6E8 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- 300W Thermoelectric Peltier Refrigerator DC12V Semiconductor Air Conditioners K Q6O8 - 1 x Kühler. Farbe: Wie abgebildet. Größe: 255 mm x 60 mm x 60 mm. Kühlleistung: 300 W.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor V9B3 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- 12V 6A Electric Peltier Half Conductor Cooler Cooler System Kit Kue G3W3 - 1 x Semiconductor Kaeltekuehler. Anwendung fuer Small Space Cooling, Luftkuehlung Entfeuchtung, Halbleiterkuehlung Lerntheorie usw. Arbeitsspannung: 12V. Arbeitsstrom: 6A. Stabil und praktisch.
- 12V 8-Chip TEC1-12706A DIY Thermoelectric Peltier Cooler 576W Air Cooling Device - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 2Pcs 40X40mm Thermoelectric Generator SP1848-27145 Peltier TEG Module W2L6 - 2 x SP1848-27145 Peltier TEG Module. and high quality. Soldering agent is low temperature solder (Tin-Bismuth Alloy).
- TE Technology, Thermoelectric Air cooler LC-035 - Manufacturer: TE Technologyy. TE: 12V---,5.7A. Manufacturer Part Number: LC-035. We have over 10 years combined experience in Industrial Surplus. We love to hear from you. Listed By: Barb.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit New - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- Gilson 853 Peltier Heating & Cooling Rack Lab - NOTE: No cables, remotes, accessories, power supplies, consumables or any other item is included unless shown in the item photo or is in the item description. The price includes free economy delivery (3-5 working days) to mainland UK addresses excluding Northern Ireland and the following postcodes, where surcharges may apply - please enquire before ordering. AB31-38, AB40-52, AB54-56, AB63 IV1-28, IV30-32, IV36-56, IV63, KA27-28, KW1-17, PA20-38, PA41-49, PA60-78, PH4-44, PH49-50, PO30-41, TR21-25, BT, GS, GY, HY, IM, JE, TDCU, ZE Therefore please contact us so we can discuss what other costs you may incur with shipment such as import VAT and customs duties. In some cases, we may need to apply for export licenses which can take some time; we can advise on time-scales. It is always best to.
- Thermoelectric Cooler Semiconductor Refrigeration Sheet Module 12V LAM - The reverse use of semiconductor refrigeration fins is thermoelectric power generation. Semiconductor refrigeration fins are generally suitable for power generation in the middle and low temperature areas.
- TES1-04903 Thermoelectric Cooler Peltier Cooling System Module Heatsink DC5 LAM - The reverse use of semiconductor refrigeration fins is thermoelectric power generation. Semiconductor refrigeration fins are generally suitable for power generation in the middle and low temperature areas.
- 300W Thermoelectric Peltier Refrigerator DC12V Semiconductor Air Conditioners K L9F9 - 1 x Kühler. Farbe: Wie abgebildet. Größe: 255 mm x 60 mm x 60 mm. Kühlleistung: 300 W.
- TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Eleme W4J1 - Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler. Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat Z7R8 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor Y7Y3 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat G4Y6 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- 144W Thermoelectric Peltier Refrigeration Cooler 12V Semiconductor Air Cond W8X6 - Maximum power: 144W. Cooling power: 100W. 1 Air Conditioner Cooling System. Size: 51x91x55mm.
- Serial Connection Cylindrical 3x 1.5V AA Battery Plastic Holder 5 Pcs A2L9
- 240W Semiconductor Refrigeration Cooler Thermoelectric Peltier 4 Cold Plate Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease.
- Hotsale! 210W Semiconductor Refrigeration Peltier Cooling System Cooler Fan - Maximum power 210W (3 pieces of excellent 12706 chip). Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US. PowerMaximum power 210W. Product features Triple-Core semiconductor cooling fan.
- 1pcs DIY 120W TEC Peltier Semiconductor Refrigerator Water Cooling Air Conditioner P3L5 - Starker wassergekuehlter Klimaanlagenkuehler. Diese Klimaanlage ist ein Raum zum Kuehlen und Blasen von Klimaanlagen. Der Hauptmotor dient zur Kuehlung des Wassers.Es ist heiss, nicht kalt. Leistung: 120W.
- DC 5Vue9.4W Thermoelectric Cooler Peltier Cooler Cooling N6C1 - Thermoelectrischer Kuehlung Modul. 1 x Thermoelectrischer Kuehler. Umweltfreundlich, keine Kuehl Fluessigkeit ist benutzt. Kuehlung oder Heitzung durch Veraenderung der Stromrichtung. Kuehlungspower:ue9,4W.
- DC 5Vue9.4W Thermoelectric Cooler Peltier Cooler Cooling P2V1 - Thermoelectrischer Kuehlung Modul. 1 x Thermoelectrischer Kuehler. Umweltfreundlich, keine Kuehl Fluessigkeit ist benutzt. Kuehlung oder Heitzung durch Veraenderung der Stromrichtung. Kuehlungspower:ue9,4W.
- DIY Kit TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling System 60W - Adopt TEC1-12706 Halbleiter Kuehlplatte, gute Qualitaet fuer den Einsatz. Halbleiterkuehlplatte: TEC1-12706. Versiegelungsprozess: Standard 704 Silikongummi, der alle Seiten versiegelt. Dieses DIY-Kit koennte genau Ihrem Geschmack sein.
- TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Elements M - Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt. Arbeiten Umgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wirkt sich direkt auf die Kühleffizienz aus).
- Semiconductor Cooler 12V 210W Triple-Core Peltier Refrigeration Cooling System - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 12V 6A Thermoelectric Peltier Semiconductor Cooler Refrigeration Cooling SysteJ6
- 🔥Semiconductor Module Thermoelectric Peltier Cooler Cooling Fan Module Kit 140W - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 12A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 🔥Thermoelectric Peltier Module Air Cooler Cooling System DIY Sets 120W NEW - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- 140W Cooling Fan Thermoelectric Peltier Refrigeration Cooling System Cooler Fan - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- 140W 12V DIY Peltier Cooler 2-Chip Air Cooling Fans Semiconductor Refrigeration - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- Thermoelectric Peltier Water Cooling Semiconductor Refrigeration Kit 4-Chip 288W - Maximum power: 288W (15.4V). The hot end uses water circulation to cool the semiconductor hot surface. Note: This set is water cooling is not used to cool water. 1 4 chip refrigerator. Cooling power: 170W.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 240w Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 210W Triple-Core Semiconductor Refrigeration Thermoelectric Peltier Cooler - 210W Semiconductor Refrigeration Thermoelectric Peltier Cooler Kit Cooler DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- New Semiconductor Refrigeration Peltier 4 Cold Cooling Plate Cooler Fan 12V 240W - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 12V 576W 8 Chip TEC1-12706 DIY Thermoelectric Peltier Cooler Air Cooling Device - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 240w Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- Triple-Core Peltier Semiconductor Refrigeration Cooling System Cooler USA - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 12V 210W Peltier Cooler Semiconductor Cooling Fan Air Cooling Refrigeration - Power: Maximum power 210W (3 pieces of excellent 12706 chip). Semiconductor Refrigeration Radiator Thermoelectric Peltier Water Cooling,3 chip. Semiconductor refrigerator. Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity.
- 240W Thermoelectric Cooler Peltier DIY Refrigeration Component Cooling Version - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 72W 118*100*68" Radiator Cooler Air Cooling Kit For Laptop Small Refrigerator - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- Three-chip DIY Semiconductor Cooler Surface Cooling Version 12V 240W 20A Durable - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- DC 12V 288W Thermoelectric Peltier Water Cooling System Refrigeration Cooler USA - Maximum power: 288W (15.4V). Note: This set is water cooling is not used to cool water. Cooling power: 170W. Cooling plate + fan. The hot end uses water circulation to cool the semiconductor hot surface.
- Electrical Semiconductor Refrigeration Cooling Fan Cooler Peltier Coolers New - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V Semiconductor Refrigeration Kit Thermoelectric Peltier Water Cooling 4-Chip - The hot end uses water circulation to cool the semiconductor hot surface. Note: This set is water cooling is not used to cool water. 1 4 chip refrigerator. Cooling power: 170W. Cooling plate + fan.
- Triple-Core Semiconductor Cooling Fan Air Cooling Refrigeration DIY 12V 210W - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY 12V 576W - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V 240W Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V 240W Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- New 240W Semiconductor Refrigeration Peltier 4 Cold Cooling Plate Cooler Fan 12V - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 72W 12V Semiconductor Air Cooler Kit Thermoelectric Peltier Cooling System USA - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- 140W 12V Semiconductor Refrigeration Air Dehumidifier Cooling Fan Silent Design - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 20A Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Fan 12Volt - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- Refrigeration Cooling Fan DIY Peltier Cooler Semiconductor Module Dehumidifier - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- 12V 240W Three-chip Thermoelectric Peltier Cooler DIY Semiconductor Cooling - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 2Pcs 40X40mm Thermoelectric Generator SP1848-27145 Peltier TEG Module J5B5 - 2 x SP1848-27145 Peltier TEG Module. and high quality. Soldering agent is low temperature solder (Tin-Bismuth Alloy).
- Peltier Cooler Semiconductor DIY Refrigeration Cooling Fan Module Dehumidifier - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- Thermoelectric Peltier 3Chip Refrigeration Cooling System Kit Cooler Fan 12V 20A - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 144W Thermoelectric Peltier Refrigeration Cooler 12V Semiconductor Air Cond G6I2 - Maximum power: 144W. Cooling power: 100W. 1 Air Conditioner Cooling System. Size: 51x91x55mm.
- Thermoelectric Peltier Refrigeration Cooler DC12V 30A Semiconductor Air Con X6V6 - Current: 30A. 1 x Semiconductor cooling. Maximum power: 288W. Cooling power: 170W. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing.
- Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan 240w - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 12V 576W 8-Chip TEC1-12706 DIY Thermoelectric Cooler Radiator Air Cooling Summer - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse.
- 2Pcs 40X40mm Thermoelectric Generator SP1848-27145 Peltier TEG Module A3V7 - 2 x SP1848-27145 Peltier TEG Module. and high quality. Soldering agent is low temperature solder (Tin-Bismuth Alloy).
- 240W 12V, Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V DIY Thermoelectric Cooler Refrigeration Device 8-Chip TEC1-12706 576W Watt - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor J1T7 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- 1X (TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Element - 1X(Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler). Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt. Arbeiten Umgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wirkt sich direkt auf die Kühleffizienz aus).
- 300W Thermoelectric Peltier Refrigerator DC12V Semiconductor Air Conditioners K K2Y5 - 1 x Kühler. Farbe: Wie abgebildet. Größe: 255 mm x 60 mm x 60 mm. Kühlleistung: 300 W.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor T9N8 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- 8-Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device 12V 576W USA - Power: 576w. DIY Thermoelectric Peltier Cooler Air Cooling Devices. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. Can be used for plate cooling, pet bed cooling, test bench, small space cooling.
- DIY Thermoelectric Cooler Cooling System Semiconductor Refrigeration System KiK3
- 12V 6A Thermoelectric Peltier Semiconductor Cooler Refrigeration Cooling SysteX3
- Argon Mini Fan Hat With Builtin Heatsink Onoff Switch For The Heatsink Fan Fully - Wide compatibility with Raspberry Pi 3/4 board only and with Argon Poly+. The Mini Fan HAT is the latest Fan HAT for Raspberry Pi 4 that easiliy fits into any case. The Fan HAT only uses 12 GPIO pins on the Raspberry Pi, allowing the use of other GPIO pins for other projects.
- Car Battery Charger with LCD Touch Screen Display Repair Charger, EU-St E5R8 - 1 x Autobatterieladegerät. Ausgangsspannung: DC13,8-15,5V. Ausgangsstrom: DC 10 (max.). Spannung: 12V.
- 4 Chip Water Cooling System Kit Thermoelectric Peltier Refrigeration Cooler 170W - 【Product parameters】 Maximum power: 288W (15.4V) Maximum current: 24A Rated voltage: DC 12V Current Rating: 17A Cooling power: 170W Product size: length 180MM* width 65MM* height 62MM Note: This set is water cooling is not used to cool water Connection method: Cooling plate + fan Red line connected to the power supply l2V positive Black line connected to the power supply l2V negative Features: * 2 calibers are 9mm, and can be connected to the inner diameter of 8nn water pipes. * The hot end uses water circulation to cool the semiconductor hot surface. *Connection method The package includes: 1*4 chip refrigerator.
- 8 Chip hermoelectric Peltier Cooler Air Cooling Device DIY TEC1-12706A 576w - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 4Chip Refrigeration Kit Thermoelectric Peltier Water Cooling Decive Plate + fan - Cooling Plate + Fan. Note: This Set Is Water Cooling Is Not Used to Cool Water. Cooling Power: 170w. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface. Your satis faction is our ultimate goal.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor W8L9 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- 240w Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 240W Semiconductor Cooler Refrigeration Module DIY 3 Peltier Surface Cooling US - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- TES1-4902 2cmx2cm Heatsink Thermoelectric Peltier Cooler Plate - 1 x TES1-4902 Thermoelectric Peltier Cooler. Wire Size:Lead Length 50¡À8mm RV Standard Wire Single Head 5mm Tinned. Storage conditions:-40 to 60 Degrees. Assembly pressure: 85N/cm2. Working Current:Imax=2A.
- USA TEC1-12715 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module NEW - Top USA Distributor. New List Item. Reverse the polarity to get ice cold in minutes or heat to boiling. 1 Set Slimming machine lazy slimming thin belly slimming belt massage belt. 1 pair Sandbag Punch Training Kids Children Boxing Gloves Boys/Girls Fight.
- 4Chip Refrigeration Kit Thermoelectric Peltier Water Cooling Decive Plate + fan - Cooling Plate + Fan. Note: This Set Is Water Cooling Is Not Used to Cool Water. Cooling Power: 170w. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface. Your satis faction is our ultimate goal.
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Elements Q7O6 - 1 x Thermoelectric Cooler Peltier. Size: 40 x 40 x 3.8mm. Material: semiconductor. Colour: white.
- 8-chip 576w 12v Thermoelectric Peltier Cooler Air Cooling Devices Refrigerator - 8-Chip 576W Thermoelectric Peltier Cooler Air Cooling Devices 12V water cooling. Power: 576w. This product is only a refrigerator, you need to prepare the following accessories Can be used for plate cooling, pet bed cooling, test bench, small space cooling.
- 12V 240W Thermoelectric Cooler DIY Semiconductor Surface Cooling Version NEW - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V 72W 4-6A Air Cooler Cooling Thermoelectric Module Cooling System Cooler Fan - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- 1 X 12V Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Fan 72W - This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. parameter: Working voltage: 12V Maximum power: 72W Maximum current: 4-6A Product size: 118*100*68MM The package includes: 1*DIY semiconductor air cooling kit.
- 240w Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- DIY Kit TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling System - Versiegelungsprozess: Standard 704 Silikongummi, der alle Seiten versiegelt. Adopt TEC1-12706 Halbleiter Kuehlplatte, gute Qualitaet fuer den Einsatz. Halbleiterkuehlplatte: TEC1-12706. 1 x TEC1-12706.
- USA,TEC1-12706,Thermoelectric Peltier Module Water Cooler Cooling System - Adopt TEC1-12706 semiconductor chilling plate, good quality for use. Refrigeration Power : Max. Conduction Module Size : 60 45 21mm (Approx.). 1 Conduction Module. Great DIY kit for electronic enthusiasts in semiconductor cooling applications.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 240W Refrigeration Plate Cooler Semiconductor Peltier Cold Cooling Fan 12V - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease.
- TEC1-12706 Thermoelectric Cooler Cooling Peltier Plate Module 12V -~F - 1 pcs TEC1-12706 Radiator Thermoelectric Cooler. Has a wide range of applications e.g CPU cooling. Size: 40mm x 40mm x 4mm. Gets ice cold or boiling hot within minutes (you can choose by switching the polarity).
- TEC1-12706 Thermoelectric Module Water Cooling System DIY Replacement Parts Set
- Peltier Thermoelectric Cooler DC12V 30A Semiconductor Air Conditioning Cooling System T4N7 - Strom: 30A. Farbe:Wie abgebildet. Kühlleistung: 170W.
- Thermoelectric Power Module, SP1848-27145 Thermoelectric Power Generator Peltier - SP1848 27145 120 degree temperature resistant semiconductor thermoelectric power generation chip SP1848-27145. SP1848-27145 TEC 40x40mm Semiconductor Thermoelectric Heatsink Cooler Peltier Plate Module For Power Generation.
- Peltier Thermoelectric Cooler DC12V 30A Semiconductor Air Conditioning Cooling System A1W7 - Strom: 30A. Farbe:Wie abgebildet. Kühlleistung: 170W.
- TEC1-12706 12V 6A 40X40MM Heatsink Thermoelectric Cooler Peltier Plate Module - We will try our best to solve your problem.
- 5x TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Plate Modul.FW - Cooling power: Qcmax 58-65W. You can follow below process to chontact us. Size: Approx. 40mm x 40mm x 3.8mm. Power Cord: Approx. Operates Temperature: -30 ℃ to 70 ℃. Tmax(Qc=0): up to 65 ℃. Imax (A): 5.8A.
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Eleme Y2C7 - Chipmodell: TEC1-12705. 1 x thermoelektrischer Kühler Peltier. Größe: 40 x 40 x 3,8 mm. Material: Halbleiter. Farbe: weiß. Arbeitsumgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wird direkt die Kühleffizienz beeinflussen).
- TEC1-12710 100W TEC1 12710 12V 10A TEC thermoelectric cooler peltier.FW - 1pcs thermoelectric cooler peltier. Operates from 0~15.2V DC and 0~10A. Operates Temperature: -30 to 70. Size: 40mm x 40mm x 4mm. Model: TEC1-12710. All pictures are for illustration purpose only and Colours may vary slightly.
- TEC1-12710 100W TEC1 12710 12V 10A TEC thermoelectric cooler peltie.FW - 1pcs thermoelectric cooler peltier. Operates from 0~15.2V DC and 0~10A. Operates Temperature: -30 to 70. Size: 40mm x 40mm x 4mm. Model: TEC1-12710. All pictures are for illustration purpose only and Colours may vary slightly.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor M3N8 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- DIY 8Chip Thermoelectric Cooler Refrigeration Semiconductor Peltier Cooling 576W - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V 4 Chip Thermoelectric Peltier Cooler Water Cooling Refrigeration System Cool - Note: This Set Is Water Cooling Is Not Used to Cool Water. 1 4 Chip Refrigerator. Cooling Power: 170w. Cooling Plate + Fan. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface.
- 240W 12V Thermoelectric Cooler Peltier DIY Fan Refrigeration Cooling System Fan - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V 210W Peltier Cooler Semiconductor Cooling Fan Air Cooling Refrigeration - Power: Maximum power 210W (3 pieces of excellent 12706 chip). Semiconductor refrigerator. Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit New - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V 210W Peltier Cooler Semiconductor Cooling Fan Air Cooling Refrigeration - 210W Semiconductor Air Cooling Refrigeration Triple-Core Peltier Cooler DIY. Power: Maximum power 210W (3 pieces of excellent 12706 chip). Semiconductor refrigerator. Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan 240w - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- Peltier Cooler Semiconductor Cooling Fan Air Cooling Refrigeration DIY 210W - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- Serial Connection Cylindrical 3x 1.5V AA Battery Plastic Holder 5 Pcs F4L7
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 8-Chip Thermoelectric Cooler Refrigeration Semiconductor Peltier Cooling Device - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 1xPeltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan 240W - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY 12V 576W - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling System Tools Set
- TEC1-12706-Thermoelectric Peltier Module Water Cooler Cooling System DIY-Kit - Adopt TEC1-12706 semiconductor chilling plate, good quality for use. Refrigeration Power : Max. Great DIY kit for electronic enthusiasts in semiconductor cooling applications. Conduction Module Size : 60 45 21mm (Approx.).
- TEC2-19006 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 12V 57W - Utilize the Peltier effect of semiconductor materials. • Semiconductor refrigeration sheets are a type of heat pump. • When direct current is connected in series through two different semiconductor materials to form a couple, heat can be absorbed and released at both ends of the couple, achieving the purpose of refrigeration.
- TEC1-12706 Thermoelectric Peltier Module Water-Cooler Cooling System DIY-Kit
- SemiconductorRefrigerationCooler Simple Installation - FAST COOLING: Thermoelectric refrigeration cooling system features a large cooling block for rapid cooling with more air exposure. 1 x Cooling Block. SOLID STATE COOLING WITH GOOD COOLING: The semiconductor cooler adopt the form of solid state cooling, which combines semiconductor technology and electronic assembly technology, and has a good cooling effect.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- Semiconductor Cooler Electronic Thermoelectric Cooling System Easy - FAST COOLING: Thermoelectric refrigeration cooling system features a large cooling block for rapid cooling with more air exposure. Item Type: Thermoelectric Refrigeration Cooling System. SOLID STATE COOLING WITH GOOD COOLING: The semiconductor cooler adopt the form of solid state cooling, which combines semiconductor technology and electronic assembly technology, and has a good cooling effect.
- TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Eleme P4J3 - Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler. Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor A4M5 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- 12V 6A Electric Peltier Half Conductor Cooler Cooler System Kit Kue I2C6 - 1 x Semiconductor Kaeltekuehler. Anwendung fuer Small Space Cooling, Luftkuehlung Entfeuchtung, Halbleiterkuehlung Lerntheorie usw. Arbeitsspannung: 12V. Arbeitsstrom: 6A. Stabil und praktisch.
- TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Eleme C2C7 - Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler. Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- 12V 6A Electric Peltier Half Conductor Cooler Cooler System Kit Kue L6S2 - 1 x Semiconductor Kaeltekuehler. Anwendung fuer Small Space Cooling, Luftkuehlung Entfeuchtung, Halbleiterkuehlung Lerntheorie usw. Arbeitsspannung: 12V. Arbeitsstrom: 6A. Stabil und praktisch.
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Eleme P9M6 - Chipmodell: TEC1-12705. 1 x thermoelektrischer Kühler Peltier. Größe: 40 x 40 x 3,8 mm. Material: Halbleiter. Farbe: weiß. Arbeitsumgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wird direkt die Kühleffizienz beeinflussen).
- Peltier Thermoelectric Cooler DC12V 30A Semiconductor Air Conditioning Cooling System G9W6 - Strom: 30A. Farbe:Wie abgebildet. Kühlleistung: 170W.
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Eleme X4D8 - Chipmodell: TEC1-12705. 1 x thermoelektrischer Kühler Peltier. Größe: 40 x 40 x 3,8 mm. Material: Halbleiter. Farbe: weiß. Arbeitsumgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wird direkt die Kühleffizienz beeinflussen).
- DIY Electric Cooler Cooling System Semiconductor Cooling System Kit Cooling Cooler J7N7 - Feature1: Thermoelektrische Kühlung. Premium Halbleiterkühler mit super Leistung und langer Lebensdauer. Dieser 15L Wasserkühler kann die Temperatur auf 8-10 Grad unter die normale Temperatur senken.
- 180W Thermoelectric Peltier Refrigerator DC12V Semiconductor Air Conditioners Krra - 1 Kühler. Kühlleistung: 180W. Größe: 135x60mm. Farbe: wie abgebildet. Langlebiges Design und exquisite Verarbeitung erfüllen Ihre Anforderungen.
- 1PC TES1-12702 Thermoelectric Heatsink Cooler Peltier Plate Module - Ideal for cooling down semiconductor devices. - Size: Approx. 1X TES1-12702. 1 pair Sandbag Punch Training Kids Children Boxing Gloves Boys/Girls Fight. 1:5 / 1:8 For Hardwood & Softwood Woodworking Dovetail Marker Marking Gauge.
- Peltier Cooler DIY Thermoelectric Semiconductor Cooler Refrigeration Cooler Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- DIY Semiconductor Surface Cooling Version 3-Chip 12V Peltier Cooling System 20A - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- TEC1-12709 Thermoelectric Cooler Heatsink Peltier Module 40mm 12V 9A - 1 x TEC1-12709 Thermoelectric Cooler. MPN : Does Not Apply. Item Specifics. Tmax (°C) : 67. Imax (A) : 7. Umax (V) : 15.4. Couples : 127. Model : TEC1-12709.
- TEC1-12705 Heat Sink Thermoelectric Cooler Cooling Peltier Plate Module 40 x 40m - 1 x TEC1-12705 cooler plate module. Size: 40 x 40 x 3.8mm. Top USA Distributor. 1 Set Slimming machine lazy slimming thin belly slimming belt massage belt. 1:5 / 1:8 For Hardwood & Softwood Woodworking Dovetail Marker Marking Gauge.
- DIY Electronic Semiconductor Surface Cooling Version 12V 3 Chip Cooling System - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- TEC1-12704 40x40mm Thermoelectric Cooler Peltier Plate Module 15V CPU - 1 Piece Thermoelectric Cooler. - Size: Approx. 1 Set Slimming machine lazy slimming thin belly slimming belt massage belt. - Material: Ceramic. Travel Accessories. 1:5 / 1:8 For Hardwood & Softwood Woodworking Dovetail Marker Marking Gauge.
- 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY 12V 576W - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V 20A DIY Electronic Semiconductor Surface Cooling Version Peltier Cooler - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V 576W 8-Chip TEC1-12706A DIY Thermoelectric Peltier Cooler Air Cooling Device - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V 72W Peltier Refrigeration Semiconductor Cooling Air Radiator Fridge Cooler - 1xDC 12V Peltier Refrigeration Cooling Air Cooling Radiator DIY Fridge Cooler. Power: 72w. A semiconductor cooler is a form of solid-state cooling that combines semiconductor technology and electronics assembly technology.
- 12V 72W Peltier Refrigeration Semiconductor Cooling Air Radiator Fridge Cooler - 1xDC 12V Peltier Refrigeration Cooling Air Cooling Radiator DIY Fridge Cooler. Power: 72w. A semiconductor cooler is a form of solid-state cooling that combines semiconductor technology and electronics assembly technology.
- 12V 72W Peltier Refrigeration Semiconductor Cooling Air Radiator Fridge Cooler - 1xDC 12V Peltier Refrigeration Cooling Air Cooling Radiator DIY Fridge Cooler. Power: 72w. A semiconductor cooler is a form of solid-state cooling that combines semiconductor technology and electronics assembly technology.
- 80W TEC1-12709 TEC Thermoelectric Cooler Peltier 12V9A - MPN : Does Not Apply. Item Specifics. Ohm:1.3 - 1.5. Type Number: TEC1-12709. 1 Set Slimming machine lazy slimming thin belly slimming belt massage belt. 1:5 / 1:8 For Hardwood & Softwood Woodworking Dovetail Marker Marking Gauge.
- TEC1 SP1848-27145 TEC Thermoelectric Heatsink Cooler Peltier Plate Module - Specifications (Power input when used in Peltier Effect). but they can also be used for cooling and/or heating applications. Can be used for power generation, cooling or heating applications. These modules are manufactured specifically for power generation.
- Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 12V USA - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- 240w Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 4 Chip DIY Thermoelectric Peltier Cooler Refrigeration Water Cooling System 12V - Note: This Set Is Water Cooling Is Not Used to Cool Water. 1 4 Chip Refrigerator. Cooling Power: 170w. Cooling Plate + Fan. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface.
- 240W Three-chip Thermoelectric Cooler Peltier Refrigeration Cooling System Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- Semiconductor Refrigeration Cooler Thermoelectric Peltier Cold Plate 240W 12V US - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease.
- 12V Semiconductor Refrigeration Air Cooling Fan Dual Head Peltier Cooler 140W US - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current RatingUp to 8A；Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 288W Thermoelectric Peltier Refrigeration Cooler DC 12V Semiconductor 180*62mm - Maximum power: 288W. Color: blue + silver. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
- 288W 4 Chip Thermoelectric Peltier Refrigeration Water Cooling System Kit Cooler - 【Product parameters】 Maximum power: 288W (15.4V) Maximum current: 24A Rated voltage: DC 12V Current Rating: 17A Cooling power: 170W Product size: length 180MM* width 65MM* height 62MM Note: This set is water cooling is not used to cool water Connection method: Cooling plate + fan Red line connected to the power supply l2V positive Black line connected to the power supply l2V negative Features: * 2 calibers are 9mm, and can be connected to the inner diameter of 8nn water pipes. * The hot end uses water circulation to cool the semiconductor hot surface. *Connection method The package includes: 1*4 chip refrigerator.
- 4 Chip Thermoelectric Peltier Cooler Refrigeration Water Cooling System 12 Volt - Note: This Set Is Water Cooling Is Not Used to Cool Water. 1 4 Chip Refrigerator. Cooling Power: 170w. Cooling Plate + Fan. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface.
- 4 Chip DIY Thermoelectric Peltier Cooler Refrigeration Water Cooling System 12V - Note: This Set Is Water Cooling Is Not Used to Cool Water. 1 4 Chip Refrigerator. Cooling Power: 170w. Cooling Plate + Fan. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface.
- Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Fan DIY Kit 12V - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- 240w Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 12V 4 Chip Thermoelectric Peltier Cooler Water Cooling Refrigeration System USA - Note: This Set Is Water Cooling Is Not Used to Cool Water. 1 4 Chip Refrigerator. Cooling Power: 170w. Cooling Plate + Fan. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface.
- US 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 12V 60W - Utilize the Peltier effect of semiconductor materials. • Semiconductor refrigeration sheets are a type of heat pump. • When direct current is connected in series through two different semiconductor materials to form a couple, heat can be absorbed and released at both ends of the couple, achieving the purpose of refrigeration.
- TEC1-04901/2/3/5/6 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module - Heatsink Thermoelectric Cooler Cooling Peltier Plate Module. Utilize the Peltier effect of semiconductor materials. • When direct current is connected in series through two different semiconductor materials to form a couple, heat can be absorbed and released at both ends of the couple, achieving the purpose of refrigeration.
- 1 Set Air Conditioner DIY Kit Thermoelectric Peltier Cooler Refrigeration Cooh - Suitable for: small space cooling, learning the principle of semiconductor refrigeration, pet air conditioning, etc. 2 x fixing screws. 2x thermal adhesive. Colour:Silver+blue. 1 x water cooling heads.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor A6H7 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- 300W Thermoelectric Peltier Refrigerator DC12V Semiconductor Air Conditioners K W6T9 - 1 x Kühler. Farbe: Wie abgebildet. Größe: 255 mm x 60 mm x 60 mm. Kühlleistung: 300 W.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor Z9Z2 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Eleme W7M9 - Chipmodell: TEC1-12705. 1 x thermoelektrischer Kühler Peltier. Größe: 40 x 40 x 3,8 mm. Material: Halbleiter. Farbe: weiß. Arbeitsumgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wird direkt die Kühleffizienz beeinflussen).
- TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Eleme Z5P1 - Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler. Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Eleme I7A5 - Chipmodell: TEC1-12705. 1 x thermoelektrischer Kühler Peltier. Größe: 40 x 40 x 3,8 mm. Material: Halbleiter. Farbe: weiß. Arbeitsumgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wird direkt die Kühleffizienz beeinflussen).
- 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit 240W - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- DIY Electric Cooler Cooling System Semiconductor Cooling System Kit Cooling Cooler P6Z8 - Feature1: Thermoelektrische Kühlung. Premium Halbleiterkühler mit super Leistung und langer Lebensdauer. Dieser 15L Wasserkühler kann die Temperatur auf 8-10 Grad unter die normale Temperatur senken.
- TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Eleme H9M5 - Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler. Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan 240w - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor P1M9 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- 12V TEC1-12706 8 Chip Thermoelectric Peltier Cooler Refrigeration Cooling Device - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- Durable 12V DIY Electronic Semiconductor Surface Cooling Version Peltier Cooler - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- DIY Semiconductor Surface Cooling Version 3-Chip 12V 20A Peltier Cooling System - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V 240W 20A Three-chip DIY Semiconductor Cooler Surface Cooling Version Durable - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V 3 Chip DIY Electronic Semiconductor Surface Cooling Version Cooling System - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- Semi-conductor Refrigeration Module Peltier Cooler Surface Cooling Version 240 W - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- Refrigeration Thermoelectric Cooler DIY Semiconductor Device Cooling Fan US - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- TEC1-12704 Thermoelectric Cooler Peltier 30mmx30mm TEC1 12704 Elements ModulN8A2 - 1 x Thermoelectric Cooler Peltier. Size: 30 x 30 x 3.2mm. Material: semiconductor. Colour: white. Assembly pressure: 85N/cm2.
- Thermoelectric Cooler Module Semiconductor Refrigeration Film TEC1‑12706 DC12V✈ - Reverse use of semiconductor refrigeration fins is thermoelectric power generation. Semiconductor refrigeration fins are generally suitable for power generation in the middle and low temperature areas.
- 4 Chip DIY Thermoelectric Peltier Cooler Refrigeration Water Cooling System 12V - Note: This Set Is Water Cooling Is Not Used to Cool Water. 1 4 Chip Refrigerator. Cooling Power: 170w. Cooling Plate + Fan. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface.
- Refrigeration Thermoelectric Module Peltier air Cooler Cooling System DIY Set US - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- Thermoelectric Cooler TEC2-25408 2-Layer Semiconductor Electronic Cool Plate LAM - The reverse use of semiconductor refrigeration fins is thermoelectric power generation. Semiconductor refrigeration fins are generally suitable for power generation in the middle and low temperature areas.
- TEC1‑04901 5V 1A 25 X 25mm Thermoelectric Cooler Peltier Plate Module LAM - Semiconductor refrigeration fins are suitable for power generation in the middle and low temperature areas. The reverse use of semiconductor refrigeration fins is thermoelectric power generation. Item Type: Thermoelectric Cooler Module.
- 12.3x24.7mm TES1-06302 6V2A Heatsink Thermoelectric Cooler Peltier Cooling P LAM - Semiconductor refrigeration fins are generally suitable for power generation in the middle and low temperature areas. The reverse use of semiconductor refrigeration fins is thermoelectric power generation.
- Thermoelectric Cooler Semiconductor Refrigeration Sheet Module 12V LAM - The reverse use of semiconductor refrigeration fins is thermoelectric power generation. Semiconductor refrigeration fins are generally suitable for power generation in the middle and low temperature areas.
- Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Double Fan - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- 240w Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan - 240W 12V Semiconductor Refrigeration Cooler Thermoelectric Peltier Cold Plate US Product Description 240W semiconductor cooler with fan 240W Semiconductor Refrigeration Thermoelectric Peltier Cold Plate Cooler w/Fan Feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product cooling plate size：20*22cm Product composition: 4 cooling plates,.
- Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Fan 12V 20A NEW - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- 2pcs Tec112706 Semiconductor Refrigeration Tablets Heatsink Thermoelectric Coole - Acxico 2Pcs TEC1-12706 Semiconductor Refrigeration Tablets Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 40x40MM. Apply the grease to the hot and cold side of the cooling plate 3. Install the cooling plate on the radiator and place the insulation pad in the middle 4.
- Advancing Gene NVMe M.2 2280 SSD Heatsinks Cooler, Universal Type (2nd Gen) - ★ Why Choose Us?. Perfectly fit for all kinds of M.2 2280 SSD (22x80mm), such as 850 EVO, 860 EVO, 960 EVO, 970 EVO, 970 EVO Plus, 950 PRO, 960 PRO, 970 PRO, SSD 980, 980 PRO, etc. Minimum installation height required: 4mm.
- 12V 6A Thermoelectric Peltier Semiconductor Cooler Refrigeration Cooling SysteU7 - Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor Technologies and electronic assembly techniques. Application for small space cooling, air cooling dehumidification, semiconductor refrigeration learning etc.
- TEC1-12706 ,Thermoelectric Peltier ,Module Water Cooler,Cooling System DIY Kit
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit New - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- Thermoélectrique Peltier Réfrigération Semi-Conducteur Cooling Système pour
- TEC1-12706 Thermoelectric Peltier Module Water-Cooler Cooling System DIY-Set AU - Adopt TEC1-12706 semiconductor chilling plate, good quality for use. Refrigeration Power : Max. Great DIY kit for electronic enthusiasts in semiconductor cooling applications. Conduction Module Size : 60 45 21mm (Approx.).
- Thermoelectric Peltier Cooler 30A Aluminum Blue + Silver Refrigeration - Current: 30A. Material: Aluminum. Color: blue + silver. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
- Thermoelectric Peltier Cooler 180x62mm 30A Aluminum DC12V Refrigeration - Size: 180x62mm. Current: 30A. Material: Aluminum. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
- Cooler 1 Pcs 180x62mm 288W 30A Aluminum Blue + Silver DC12V Refrigeration - Size: 180x62mm. Maximum power: 288W. Current: 30A. Material: Aluminum. Color: blue + silver. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
- diymore TEC1-12706 12V 60W 6A 40MMX40MM Heatsink Thermoelectric Cooler Cooling - 10X TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module. Working Current: (rated 12V); Imax: 6A. Refrigeration Power: Qcmax 50-60W. Refrigeration Power: Qcmax 50-60W. We want you to be totally satisfied with your order.
- ALL 12V Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Fan DIY - 12V Various Thermoelectric Peltier Refrigeration Cooling Systems. The water circulation must be done well, and then connect the refrigeration piece to work (see the video above for details)! Uses: Small space cooling, DIY air conditioner fans, pet air conditioners, etc.
- 1Set 12V Thermoelectric Peltier Cooler Refrigeration Cooling Fan System - Note:There is nothing in the kit that is "thermoelectric" and nothing that "refrigerates". This cooling fan is suitable for cooling in a small space. Type: semiconductor cooling fan. Water block connections fit 3/8" tubing just fine.
- Peltier Module Cp854705-2, 40 X 40 X 7.05 Mm, 51.6W @ 27°C 8.5 A 80°C - The listed price is per piece; 8 pieces are available. quiet operation.
- Peltier Thermoelectric Cooler DC12V 30A Semiconductor Air Conditioning Cooling System S8M5 - Strom: 30A. Farbe:Wie abgebildet. Kühlleistung: 170W.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor A5B1 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- TEC1‑12715 Cooling Plate Semiconductor Cooler For Thermoelectric Board DC12V - Feature: 1. This cooling plate is suitable for thermoelectric cooler refrigerator board. Made of ceramic panels and semiconductor materials for good performance. Item Type: Cooling Plate. 1 x TEC1-12715 Cooling Plate.
- TEC1‑12706 Heat Sink Thermal Electric Cooler Module 70W Water Cooling System Kit - A heat sink or water-cooled heat sink must be installed on the heat-dissipating side; otherwise the cool sink will be burned. 1 x Thermal Module (Heat Sink). TEC1-12706: One side is the cooling side and the other side is the heat sink side.
- 12V 6A Electric Peltier Half Conductor Cooler Cooler System Kit Kue I5A8 - 1 x Semiconductor Kaeltekuehler. Anwendung fuer Small Space Cooling, Luftkuehlung Entfeuchtung, Halbleiterkuehlung Lerntheorie usw. Arbeitsspannung: 12V. Arbeitsstrom: 6A. Stabil und praktisch.
- TEC1 12706 Cooler Peltier Element TEC for Heating Cooling Thermoelectric - Model: TEC1-12706. 1PC TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module M. Refrigeration power: Qcmax 50-60 w. hope you could understand.
- Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan NEW - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan SET - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 1pcs DIY 120W TEC Peltier Semiconductor Refrigerator Water Cooling Air Conditioning V6M6 - Starker wassergekuehlter Klimaanlagenkuehler. Diese Klimaanlage ist ein Raum zum Kuehlen und Blasen von Klimaanlagen. Der Hauptmotor dient zur Kuehlung des Wassers.Es ist heiss, nicht kalt. Leistung: 120W.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit! - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- Peltier Cooler Semiconductor Cooling Fan Air Cooling Refrigeration DIY 210W - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 🎆! - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 12A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit! - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Eleme J9F1 - Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler. Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- DIY Thermoelectric Cooler Cooling System Semiconductor Refrigeration System KiD6
- Serial Connection Cylindrical 3x 1.5V AA Battery Plastic Holder 5 Pcs K8N3
- 12V 576W DIY Cooling Refrigeration Fan Thermoelectric Peltier Cooler 8 Chip USA - Power: 576w. Diy Thermoelectric Peltier Cooler Air Cooling Devices. Can Be Used for Plate Cooling, Pet Bed Cooling, Test Bench, Small Space Cooling. 1 Diy Cooler. 2.360 Sets of Cooling Water Drains (Including Cooling Fan + Protection Net Cover).
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit New - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V 576W DIY Thermoelectric Peltier Cooler Air Cooling Device 8 Chip TEC1-12706 - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- Heatsink TEC1-12708 40*40MM Thermoelectric Cooler Cooling Peltier Plate Module - (1 x Thermoelectric Cooler Peltier. excluded.).
- 40*40MM Heatsink TEC1-12708 Thermoelectric Cooler Cooling Peltier Plate Module - (1 x Thermoelectric Cooler Peltier. excluded.).
- Heatsink TEC1-12708 Thermoelectric Cooler Cooling Peltier Plate Module 40*40MM - 1 x Thermoelectric Cooler Peltier. 100% Money Back. However, we will try our best to minimize it.
- 170W Water Cooling 4 Chip Refrigeration System Thermoelectric Peltier Cooler 12V - Cooling Power: 170w. Maximum Cooling Power (Qcmax)170W. Note: This Set Is Water Cooling Is Not Used to Cool Water. 1 4 Chip Refrigerator. Cooling Plate + Fan. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface.
- 12V 210W Peltier Cooler Semiconductor Cooling Fan Air Cooling Refrigeration - Applicable to cooling small rooms, air cooling dehumidification, learning semiconductor refrigeration theory, etc,and You can use it to DIY small fridge, mini air conditioner or cooling device.
- 12.3x24.7mm TES1-06302 6V2A Heatsink Thermoelectric Cooler Peltier Cooling P ZIN - Semiconductor refrigeration fins are generally suitable for power generation in the middle and low temperature areas. The reverse use of semiconductor refrigeration fins is thermoelectric power generation.
- 5V Thermoelectric Cooler Module Semiconductor Electronic Heatsink Cooling Pl ZIN - Semiconductor refrigeration fins are suitable for power generation in the middle and low temperature areas. The reverse use of semiconductor refrigeration fins is thermoelectric power generation. Item Type: Thermoelectric Cooler Module.
- TEC1‑04901 5V 1A 25 X 25mm Thermoelectric Cooler Peltier Plate Module ZIN - Semiconductor refrigeration fins are suitable for power generation in the middle and low temperature areas. The reverse use of semiconductor refrigeration fins is thermoelectric power generation. Item Type: Thermoelectric Cooler Module.
- Thermoelectric Cooler Semiconductor Refrigeration Sheet Module 12V ZIN - The reverse use of semiconductor refrigeration fins is thermoelectric power generation. Semiconductor refrigeration fins are generally suitable for power generation in the middle and low temperature areas.
- Thermoelectric Cooling Module Semiconductor Refrigerator Excellent Craftsmanship - Item Type: Semiconductor Cooler. Use: Industrial refrigeration device, DIY refrigeration device. Feature: 1. Duel Core Cooling: The size of the cooling space of this cooling unit provides cooling effect, ambient temperature, insulation, sealing, etc.
- Semiconductor Refrigeration Cooler Stable Industrial Refrigeration Cooling Kit - Feature: 1. WIDE APPLICATIONS: Semiconductor refrigeration system can be used for slab cooling, pet bed cooling, small space cooling. NO REFRIGERANT REQUIRED: Semiconductor refrigeration water chiller support stable operation, low noise, no need for refrigerant.
- Thermoelectric Refrigerator Fully Sealed Semiconductor Cooler Rapid - Feature: 1. [Fast Cooling] The semiconductor cooler adopts 12706 semiconductor cooling plate, which is good for use. Fast cooling, excellent cooling effect, so that the area being cooled has the appropriate temperature.
- Semiconductor Refrigeration System Thermoelectric Cooling System Aluminum Alloy - Item Type: Thermoelectric Cooling System. Aluminum Alloy Housing: The shell of this cooling module is made of hard aluminum alloy, which is wear resistant and pressure resistant, and can well ensure the components inside.
- DIY Fridge Cooler System Compact Structure 12V Semiconductor Refrigeration - Feature: 1. Item Type: 12V Semiconductor Refrigeration Machine. Effective Cooling: Semiconductor mini cooling module is compact in structure, but has good cooling effect. Ease of Use: The semiconductor mini cooling module is easy to use, plug the device into power and start working.
- Portable Cooling Module 140W Air Cooling Module Device Long Service Life For - Maximum Power: 140W. Use: Industrial refrigeration device, DIY refrigeration device. Feature: 1. Double Core Cooling: The size of the cooling space of this cooling unit provides cooling effect, ambient temperature, insulation, sealing, etc.
- Semiconductor Refrigeration System 300W Semiconductor Cooling System Aluminum - Cooling Power: 300W. Feature: 1. Wide Application: This semiconductor refrigeration system is suitable for small space cooling, such as pet's house, can also be used for machine cooling, etc. Item Type: Semiconductor Refrigeration System.
- Semiconductor Refrigeration 12V 70W Semiconductor Refrigeration Cooling System - Maximum Power: 70W. Item Type: Semiconductor Cooler. Feature: 1. If you do not receive our reply within 48 hours, pls. If you are satisfied with our service, pls.
- Peltier Cooling Package 12 VDC Powerful And Convenient Semiconductor - Item Type: Peltier Cooler. Feature: 1. FAST AND EXCELLENT COOLING: The product adopt semiconductor cooling plate, bring fast cooling, excellent cooling effect, suitable for small space cooling. If you do not receive our reply within 48 hours, pls.
- 288W Thermoelectric Peltier Refrigeration Cooler DC12V Semiconductor Air CoI9 - Maximum power: 288W. colour: blue + silver. Cooling power: 170W. Material: aluminu.
- 12V 60W CompleteCooling Kit Electric Refrigeration Semiconductor Cooler Mod D7G3 - This semiconductor cooler is a form of solid state cooling that incorporates semiconductor technologies and electronic assembly techniques. 1 x Semiconductor Refrigeration Piece. : "+", black line: "-".
- Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Fan DIY Kit 12 V - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- Peltier Cooler Semiconductor Cooling Fan Air Cooling Refrigeration DIY 210W New - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 288W-Thermoelectric Peltier Refrigeration Cooler DC12V Semiconductor Air-Parts - Maximum power: 288W. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Color: blue + silver. Cooling power: 170W. Current: 30A.
- Peltier Plate Thermoelectric Cooler TEC1-12715 Thermoelectric Hot Sale - (No matter whether it is water-cooled or air-cooled, apply thermal grease). Small in size, light in weight. Size: 40mm x 40mm x 3.3mm. Rated current : 15A. 1 TEC1-12715 Heatsink. Very easy to install.
- 1pc Thermoelectric Cooler Peltier Cells Peltier Elemente Module TEC1-12705 New - 1pcs Thermoelectric Cooler. Portable cooler box for cars;. Working current: Imax = 4.3-4.6A (rated at 12V). The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- 144W Thermoelectric Peltier Refrigeration Cooler 12V Cooling System DIY Kit - 144W Thermoelectric Peltier Refrigeration Cooler 12V Semiconductor Air Conditioner Cooling System DIY Kit. Maximum power: 144W. 12V Thermoelectric Peltier Refrigeration Air cooling System Cooler Fan DIY Kit.
- 12V 120W Electronic Semiconductor Refrigeration Semiconductor Refrigeration - Power: 120W. Item Type: Semiconductor Refrigeration System. Wide Application: This thermoelectric cooler can be used for small space cooling, such as flat product cooling or pet bed cooling.
- 12V 15A 120W Semiconductor Refrigeration Cooler Thermoelectric Peltier - Wonderful Characters: This semiconductor refrigeration cooler with power has stable working status, cooling power is 120W, good cooling efficiency. Cooling Power: 120W. Item Type: Semiconductor Refrigeration Cooling System.
- 2 Core DIY Electronic Industrial Small Semiconductor Refrigeration Cooling Kit - Feature: 1. Item Type: Semiconductor Refrigeration System. If you do not receive our reply within 48 hours, pls. If you are satisfied with our service, pls. CORROSION RESISTANT ALUMINUM ALLOY: Using good quality aluminum alloy material, light weight, possess good strength and good corrosion resistance.
- Semiconductor Cooling System ABS Aluminum Alloy Low Operating Noise - Flexible Use: Suitable for small space refrigeration, air cooling dehumidification and so on, simple to operate. Item Type: Refrigeration Cooler. Good Material: Using high quality ABS and aluminium alloy materials, not likely to malfunction and very durable.
- 12V Cooling Chip System Cooling Module For Car - Feature: 1. DIY Kit: You can use this cooling module to DIY what you need, such as pet air conditioner, car, this kit can make you experience the fun of doing it yourself. Item Type: Cooling Module.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit USA - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan 240W - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 12V 240W Thermoelectric Refrigeration Cooling System Peltier Cooler w/Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 12V 14A 120W Thermoelectric Refrigeration Cooling System Cooler 4 Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 72W Semiconductor Refrigeration System Refrigeration Cooler Water Chiller - 72W HIGH POWER: Semiconductor cooler possess high cooling power up to 72W, which is a perfect cooling device for fish tank, useful and practical. NO REFRIGERANT REQUIRED: Semiconductor refrigeration water chiller support stable operation, low noise, no need for refrigerant.
- Cooling System High Power Solid State Industrial Chiller With Fan For Home - NO REFRIGERANT REQUIRED: Semiconductor refrigeration water chiller support stable operation, low noise, no need for refrigerant. Feature: 1. WIDE APPLICATIONS: Semiconductor refrigeration system can be used for slab cooling, pet bed cooling, small space cooling.
- TEC1-12706 Peltier Element Module Peltier Element Cooling Plate 60W 12V TE610 - Model: TEC1-12706. 1PC TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module M. Refrigeration power: Qcmax 50-60 w. hope you could understand.
- 144W Thermoelectric Peltier Refrigeration Cooler 12V Semiconductor Air CondiB4S5 - Maximum power: 144W. Cooling power: 100W. 1 Air Conditioner Cooling System. Size: 51x91x55mm.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor I7U3 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- Refrigeration Cooling System Kit Semiconductor Air Cooling Device Cooler Module - Use Scenario: Semiconductor air cooling device is suitable for 20L space cooling, the air temperature can be cooled by 5‑8℃ compared to the normal temperature. Easy To Use: This refrigeration cooling system kit is a finished product, no assembly required, stable work, low noise, no refrigerant required.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A (conventional 10A) Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- DIY Thermoelectric Cooler Cooling System Semiconductor Refrigeration System O5C6 - Feature1: Thermoelectric Refrigeration. Feature2: Thermoelectric Cooling System. Feature3: Semiconductor Refrigeration. Premium semiconductor cooler with super power and long durability. Model Number: Semiconductor Cooler.
- 12V 4 Chip Thermoelectric Peltier Cooler Water Cooling Refrigeration System - Note: This Set Is Water Cooling Is Not Used to Cool Water. 1 4 Chip Refrigerator. Cooling Power: 170w. Cooling Plate + Fan. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface.
- Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan 240w - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit New - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 12A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Elements O9 - 1 x Thermoelectric Cooler Peltier. Size: 40 x 40 x 3.8mm. Material: semiconductor. Colour: white.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit New - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 12A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 4 Chip DIY Thermoelectric Peltier Cooler Refrigeration Water Cooling System Kit - This semiconductor refrigeration machine uses high-end semiconductor heat dissipation technology and high-quality refrigeration tablets to provide you with an efficient and powerful cooling effect. One-piece Structure : This semiconductor refrigeration machine is a finished product and does not need to be assembled.
- 300W Thermoelectric Peltier Refrigeration Cooler DC12V Semiconductor Air Co K2Y8 - Cooling power: 300W. Maximum power: 360W. Size: 255mm x 60mm x 60mm.
- 12V Cooling Semiconductor 72W Refrigeration System Air Conditioning Cooling O6N3 - Power Consumption: 72W. High cooling efficiency, easily cooling down within 20 minutes. You can make cooling system for yourself, easy and funny. 1 x Cooling System Kit. Mini air conditioner for pet or little fridge.
- Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 12V New - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A (conventional 10A) Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Serial Connection Cylindrical 3x 1.5V AA Battery Plastic Holder 5 Pcs D8A5
- Water Cooling System 12v 50a Power Supply 576w 8 Core DIY Peltier Cooler Cool - What's Included? 1*Diy Cooler This Product Is Only a Refrigerator, You Need to Prepare the Following Accessories: 1.12v 50a Power Supply 1 (or 12v 30a Power Supply 2) 2.360 Sets of Cooling Water Drains (Including Cooling Fan + Protection Net Cover) 3. Pump One 4. Water Pipe 5m (Inner Diameter 8mm) 5. 10 Buckles (M11), If There Is a Tie, It Can Be Replaced 6. Water Tank One 7. Power Cord 1 8. Connecting Line 1.5 Square Meters 2 Meters (Prevention Line Is Not Long Enough, Extension Line) Specifications Core: 8*Tec1-12706a Cooling Method: Water Cooling Appearance Size: 200*90*60mm Power: 576w Support Space: 1-2 Squares Temperature Difference 8-13 Degrees Celsius Red Line: "+", Black Line: "-" Power Supply Requirements: 12v700w Power Supply.
- TEC1-12710 100W TEC1 12710 12V 10A TEC thermoelectric cooler peltier .WS - 1pcs thermoelectric cooler peltier. Operates from 0~15.2V DC and 0~10A. Operates Temperature: -30 to 70. Size: 40mm x 40mm x 4mm. Model: TEC1-12710. All pictures are for illustration purpose only and Colours may vary slightly.
- TEC1-12710 100W TEC1 12710 12V 10A TEC thermoelectric cooler peltier.WS - 1pcs thermoelectric cooler peltier. Operates from 0~15.2V DC and 0~10A. Operates Temperature: -30 to 70. Size: 40mm x 40mm x 4mm. Model: TEC1-12710. All pictures are for illustration purpose only and Colours may vary slightly.
- 5x TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module.WS - Cooling power: Qcmax 58-65W. You can follow below process to chontact us. Size: Approx. 40mm x 40mm x 3.8mm. Working current: 4.3-4.6 A (rated 12 v); Imax: 6A. Model: TEC1-12706. Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts.
- Semiconductor Thermoelectric Heatsink Cooler Peltier Plate Module High Temp 150℃ - (Excluded.).
- 8 Chips DIY Thermoelectric Peltier Cooler Air Cooling Device 12V 576W TEC1-12706 - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY 12V - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- Semiconductor Refrigeration DIY Cooler Thermoelectric Cooling Device System - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- Peltier Cooler Semiconductor Cooling Fan Air Cooling Refrigeration DIY 210W US - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan 240w - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 288W Thermoelectric Peltier Refrigeration Cooler DC12V Semiconductor New - Maximum power: 288W. Current: 30A. Color: blue + silver. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
- New (QTY 1) Marlow DT12-4-01LS Thermoelectric Cooler Peltier Module 12V 36W
- TEC1-12706 - Thermoelectric Peltier cooler LOT OF 5 TOTAL PIECES
- Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan 240w - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- (92mm) Convenient To Use Lightweight Snap Hook Durable Small Size - Optional Size: 65mm, 72mm, 92mm, 97mm, 101mm. This hook can be tightly fastened to your diving fittings, won't easily fall off. Lightweight and small size design, convenient to use and easy to carry.
- Cooling Module 12V Semiconductor Refrigeration Air Cooling Kit + TEC1-12706 - An excellent DIY kit for electronic enthusiasts in semiconductor refrigeration applications, suitable for computer radiators and cooling in small spaces. Using high-quality aluminum + TEC1-12706 semiconductor cooling plate, durable.
- 60W 12V Thermoelectric Cooler System Peltier Semiconductor Cooling Module Kit - This semiconductor cooler is a form of cooling that incorporates semiconductor technologies and electronic assembly techniques. 1 x Semiconductor Refrigeration Piece. Adopt the fully enclosed structure, avoid the invasion of water for into the air.
- for 12V Semiconductor Air cooling Device Radiator with Fan Thermoelectric Coo - Semiconductor coolers are a form of cooling that combines semiconductor technology and electronic assembly technology. Suitable for small space cooling, air cooling dehumidification, semiconductor refrigeration learning for, etc.
- Thermoelectric cooler semiconductor refrigeration - NEW NO BOX.
- TEC1-12706 Thermoelectric Peltier Module Water-Cooler Cooling System DIY-set - Adopt TEC1-12706 semiconductor chilling plate, good quality for use. Refrigeration Power : Max. Great DIY kit for electronic enthusiasts in semiconductor cooling applications. Conduction Module Size : 60 45 21mm (Approx.).
- Peltier Cooler Semiconductor Cooling Fan Air Cooling Refrigeration DIY 210W US! - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- Marlow Industries RC12-4-01 Peltier Modules Heating / Cooling 308101 (Lot of 3) - 3x – Marlow Industries RC12-4-01 Peltier Modules. Type: Peltier Modules. These modules have been pulled from working devices, units have been tested and perform as expected.
- Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan 240w - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 50W Thermoelectric Cooler Semiconductor Refrigeration System Set for 15L Water - This 15L water cooler can reduce the water temperature to 8-10 degrees normal temperature. 1 thermoelectric cooler only, other accessories demo in the picture is not included! 1 x Thermoelectric Cooler.
- 12V 576W 8-Chip Peltier Cooler Thermoelectric Peltier Cooler Air Cooling Device - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V 8 Chip Thermoelectric Peltier Refrigeration Cooling System Kit Cooler 576w - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V DIY Thermoelectric Peltier Refrigeration Cooler Fan System Cooling 240W USA - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 240W Semiconductor Cooler w/ Fan, Peltier Cooler 4 Refrigeration Cooling Plate - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- Semiconductor Refrigeration Peltier Plate Cooler 240W W/ 4 Mini Fan 12V Summer - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- Semiconductor Cooler W/ Fan, Peltier Plate Cooling For Small Space Cooling - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor T1H5 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- Peltier Thermoelectric Cooler DC12V 30A Semiconductor Air Conditioning Cooling System L4R3 - Strom: 30A. Farbe:Wie abgebildet. Kühlleistung: 170W.
- 240W 12V Semiconductor Refrigeration Cooler Thermoelectric Peltier Cold Plate - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease.
- 240W 12V Refrigeration Plate Cooler Semiconductor Peltier Cold Cooling Fan USA - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 1X 576W 8-Chip TEC1-12706A DIY Thermoelectric Peltier Cooler Air Cooling Device - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V 8A 40x40mm Heatsink Thermoelectric Cooler Peltier Cooling Plate TEC2‑254 ZIN - Size: Approx. 40x40mm / 1.6x1.6in. The reverse use of semiconductor refrigeration fins is thermoelectric power generation. Semiconductor refrigeration fins are generally suitable for power generation in the middle and low temperature areas.
- TES1‑06305 Thermoelectric Cooler 6V 5A Semiconductor Electronic Refrigeratio ZIN - The reverse use of semiconductor refrigeration fins is thermoelectric power generation. Semiconductor refrigeration fins are generally suitable for power generation in the middle and low temperature areas.
- 12V Semiconductor Peltier Cooler Refrigeration Thermoelectric Peltier Cooler - Semiconductor cooling fan. Triple-Core semiconductor cooling fan. 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity. Maximum power 210W (3 pieces of excellent 12706 chip).
- TES1-12706 12V 6A 30 X 30mm Thermoelectric Cooler Peltier Plate Module ZIN - The reverse use of semiconductor refrigeration fins bring thermoelectric power generation. Semiconductor refrigeration fins are generally suitable for power generation in the middle and low temperature areas.
- 24V 6A 50x50mm Heatsink Thermoelectric Cooler Peltier Cooling Plate TEC1‑263 ZIN - The reverse use of semiconductor refrigeration fins is thermoelectric power generation. Semiconductor refrigeration fins are generally suitable for power generation in the middle and low temperature areas.
- 8-Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device 12V 576W - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- Thermoelectric Refrigeration Cooling System 2‑Core Semiconductor Cooler 110V - Thermoelectric refrigeration cooling system support stable work, low noise, no need for refrigerant. Item Type: Thermoelectric Refrigeration Cooling System. Feature: 1. Cooling effect depends on the size of the cooling space, ambient temperature, heat insulation performance, airtightness, etc.
- Thermoelectric Cooler Semiconductor Water Chiller Cooling System Device 180W - This thermoelectric cooler uses high-end refrigeration module which has high power and good durability. 1 x Thermoelectric Cooler. 120W is suitable for 30L fish tanks and 180W is suitable for 40L fish tank.
- New 240W Semiconductor Refrigeration Peltier 4 Cold Cooling Plate Cooler Fan 12V - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 4 Chip Refrigerator Thermoelectric Peltier Coolers Kit DIY Water Cooling Device - 1 4 Chip Refrigerator. Note: This Set Is Water Cooling Is Not Used to Cool Water. Cooling Plate + Fan. Cooling Power: 170w. The Hot End Uses Water Circulation to Cool the Semiconductor Hot Surface.
- 12V 576W 8-Chip Thermoelectric Peltier Cooler DIY Air Cooling Device TEC1-12706A - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- Aluminum Alloy Power Supply Peltier Cooler 12VDC 60W Semiconductor Refrigeration - Item Type: Peltier Cooler. Feature: 1. FAST AND EXCELLENT COOLING: The product adopt semiconductor cooling plate, bring fast cooling, excellent cooling effect, suitable for small space cooling. CORROSION RESISTANT ALUMINUM ALLOY: Made of excellent aluminum alloy material, light weight, possess good strength and good corrosion resistance.
- ineo Aluminum M.2 2280 SSD Heatsinks with 20mm Fan and Pure Cooper Strip for ... - Heat Conductive Material (1 x 0.5mm; 1 x 1mm; 8 x 0.8mm small square): Unique Nano silicone thermal pad. Heatsink Design: Groove design, greatly increase the heat dissipation area. M.2 SSD Heatsink size: 0.94 x 2.95 x 0.24in.
- KOOBOOK 1Set 12V Thermoelectric Peltier Cooler Refrigeration Cooling Fan Syst... - Note:There is nothing in the kit that is "thermoelectric" and nothing that "refrigerates". This cooling fan is suitable for cooling in a small space. Water block connections fit 3/8" tubing just fine.
- TEC1-12705 Thermoelectric Cooler Peltier 40*40MM 12V Peltier Elemente MoY-ml - Working current: Imax = 4.3-4.6A (rated at 12V). 1 TEC1-12705 Cooler Module. TEC1-12705 40 40. Internal resistance: 2.5 ~ 2.8Ω (ambient temperature of 23 ± 1, 1kHZ Ac test).
- 8-Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device 12V 576W New - Power: 576w. DIY Thermoelectric Peltier Cooler Air Cooling Devices. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. Can be used for plate cooling, pet bed cooling, test bench, small space cooling.
- 240w Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 144W Thermoelectric Peltier Refrigeration Cooler 12V Semiconductor Air Condiee - Maximum power: 144W. 1 x Cooler. colour: silver + blue. Cooling power: 100W.
- DIY Thermoelectric Cooler Cooling System Semiconductor Refrigeration System Kih - Feature1: Thermoelectric Refrigeration. Feature2: Thermoelectric Cooling System. Feature3: Semiconductor Refrigeration. Premium semiconductor cooler with super power and long durability. Model Number: Semiconductor Cooler.
- TEC1 12715 136.8W 12V-15.4V 15A TEC thermoelectric peltier TEC1-12715~$j
- Peltier Thermoelectric Cooler DC12V 30A Semiconductor Air Conditioning Cooling System C7Z2 - Strom: 30A. Farbe:Wie abgebildet. Kühlleistung: 170W.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 2X(TEC2-19003 Thermoelectric Cooler Peltier 30X30Mm 19003 Double Elements 2) - 2X(Modell: TEC2-19003. Typ: Thermoelektrischer Kühler Peltier. 1 x thermoelektrischer Kühler Peltier). Material: Halbleiter.
- 2X (TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Eleme4) - 2X(Chipmodell: TEC1-12705. 1 x thermoelektrischer Kühler Peltier). Größe: 40 x 40 x 3,8 mm. Material: Halbleiter. Farbe: weiß. Arbeitsumgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wird direkt die Kühleffizienz beeinflussen).
- 240W Semiconductor Refrigeration Thermoelectric Peltier Cold Plate Cooler Fan - 240W semiconductor cooler with fan. Power: Maximum power of 240W at 15.4 V. 1 240W semiconductor cooler with fan. How to use: Place the cooling product on the smooth surface of the semiconductor refrigeration plate.
- 12V 6A Thermoelectric Peltier Refrigeration Cooling Cooler DIY Kit
- Refrigeration Plate Cooler Fridge Freezer Cold Cooling Fan Semiconductor Peltier - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 4 Chip Cooler Thermoelectric Peltier Refrigeration Water Cooling System Kit 288W - 【Product parameters】 Maximum power: 288W (15.4V) Maximum current: 24A Rated voltage: DC 12V Current Rating: 17A Cooling power: 170W Product size: length 180MM* width 65MM* height 62MM Note: This set is water cooling is not used to cool water Connection method: Cooling plate + fan Red line connected to the power supply l2V positive Black line connected to the power supply l2V negative Features: * 2 calibers are 9mm, and can be connected to the inner diameter of 8nn water pipes. * The hot end uses water circulation to cool the semiconductor hot surface. *Connection method The package includes: 1*4 chip refrigerator.
- Peltier Refrigeration Semiconductor DIY DC12V 18A Thermoelectric Cooler Cooling - Maximum Current: 18a. Semiconductor Refrigerator. Power: Maximum Power 210w (3 Pieces of Excellent 12706 Chip). Power-on Mode: 12v Is Only Divided into Positive and Negative Poles, Red Line Is Positive, Black Line Is Negative, and Connected to Electricity.
- 12V Semiconductor Peltier Cooler Refrigeration Thermoelectric Peltier Cooler - Semiconductor refrigerator. Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity. Power: Maximum power 210W (3 pieces of excellent 12706 chip).
- 12V Semiconductor Refrigeration Cooler DIY Peltier Module Cooling Fan Set 140W - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current RatingUp to 8A；Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V 576W 8-Chip TEC1-12706A DIY Thermoelectric Peltier Cooler Air Cooling Device - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY 12V 576W - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V 576W 8-Chip TEC1-12706A Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V Semiconductor Refrigeration Cooler DIY Peltier Module Cooling Fan 210W NEW - Power: Maximum power 210W (3 pieces of excellent 12706 chip). 12V Semiconductor Peltier Cooler Refrigeration Thermoelectric Peltier Cooler. Semiconductor refrigerator. Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit New - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit New - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 40x40mm DC12V High Power Semiconductor Refrigerating Sheet Thermoelectric Cooler - Components Logarithm: 82. Item Type: Thermoelectric Cooler Modules. Feature: 1. Precise incisions and interfaces make sure perfect suitability, suitable for installation location, easy to install. Professional chip sets provide excellent performance in the system.
- DIY Peltier Cooler Semiconductor Refrigeration Cooling Fan Module Dehumidifier - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- KOOBOOK 1Set 12V Thermoelectric Peltier Cooler Refrigeration Cooling Fan Syst... - Note:There is nothing in the kit that is "thermoelectric" and nothing that "refrigerates".
- KOOBOOK 1Set 12V Thermoelectric Peltier Cooler Refrigeration Cooling Fan Syst... - Note:There is nothing in the kit that is "thermoelectric" and nothing that "refrigerates". This cooling fan is suitable for cooling in a small space. Water block connections fit 3/8" tubing just fine.
- TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling System-DIY-Kit - Adopt TEC1-12706 semiconductor chilling plate, good quality for use. Refrigeration Power : Max. Great DIY kit for electronic enthusiasts in semiconductor cooling applications. Conduction Module Size : 60 45 21mm (Approx.).
- TEC1-12706 Thermoelectric Peltier Module Water-Cooler Cooling System DIY-parts
- TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling System DIY Kit - Adopt TEC1-12706 semiconductor chilling plate, good quality for use. Refrigeration Power: Max. Great DIY kit for electronic enthusiasts in semiconductor cooling applications. Conduction Module Size: 60 45 21mm(Approx.).
- 12V 60W Cooling Module for - We'd like to settle any problem in a friendly manner. Because the unpaid dispute will not be closed automatically, and we may ignore it. Max power consumption: 60 Watts. Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts.
- TEC1 12706-12712 Heatsink Thermoelectric Peltier Cooler Cooling Plate Module - Introduction to Semiconductor Refrigeration Chip: • Semiconductor refrigeration sheets are a type of heat pump. • Its advantage is that there are no sliding components, which can be applied in situations where space is limited, reliability requirements are high, and there is no refrigerant pollution. Utilize the Peltier effect of semiconductor materials. • When direct current is connected in series through two different semiconductor materials to form a couple, heat can be absorbed and released at both ends of the couple, achieving the purpose of refrigeration. • It is a refrigeration technology that generates negative thermal resistance, characterized by no moving components and high reliability.
- Semiconductor Cooler Refrigeration Peltier Cold Plate w/ Cooling Fan 12 V 240 W - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 2pcs 40mm Heatsink Kit 120mm x 40mm x 20mm Cooler Aluminum Heatsink for Cooli... - 2pcs 40mm Heatsink Kit 120mm x 40mm x 20mm, Cooler Aluminum Heatsink for Cooling LED Peltier Thermal Module Tec1-12706. 40mm Aluminum Heatsink.
- 12715 12V 240W Cooler Peltier Semiconductor Refrigeration Cooling Plate Cooler - Semiconductor chip cooling, using 12715 cooling module, has a better cooling effect. Model: 12715. Great product for electronic enthusiasts in DIY semiconductor cooling system. Item Type: Thermoelectric Cooler.
- Refrigeration Cooling System Kit Semiconductor Portable Air Cooling Device Hot - Use Scenario: Semiconductor air cooling device is suitable for 20L space cooling, the air temperature can be cooled by 5‑8℃ compared to the normal temperature. Easy To Use: This refrigeration cooling system kit is a finished product, no assembly required, stable work, low noise, no refrigerant required.
- Aluminum M.2 2280 SSD Heatsinks with 20Mm Fan and Pure Cooper Strip for M.2 NVME - Heat Conductive Material (1 x 0.5mm; 1 x 1mm; 8 x 0.8mm small square): Unique Nano silicone thermal pad. Heatsink Design: Groove design, greatly increase the heat dissipation area. M.2 SSD Heatsink size: 0.94 x 2.95 x 0.24in.
- KOOBOOK 1Set 12V Thermoelectric Peltier Cooler Refrigeration Cooling Fan Syst... - Manufacturer KOOBOOK. Note:There is nothing in the kit that is "thermoelectric" and nothing that "refrigerates". This cooling fan is suitable for cooling in a small space. Type: semiconductor cooling fan.
- 12V Thermoelectric Peltier Refrigeration Cooling System Kits Cooler Fan DIY - 12V Various Thermoelectric Peltier Refrigeration Cooling Systems. 9025 cooling fan 3W, 4010 cold end fan 1.5W. Rapid cooling, excellent cooling effect. Ideal for small space cooling. Single-core machine size: length 95mm width 62~92mm total height 170mm.
- DIY Thermoelectric Cooler Cooling System Semiconductor Refrigeration System KiB8 - Feature1: Thermoelectric Refrigeration. Feature2: Thermoelectric Cooling System. Feature3: Semiconductor Refrigeration. Premium semiconductor cooler with super power and long durability. Model Number: Semiconductor Cooler.
- DIY kits Thermoelectric Peltier Refrigeration Cooling System Water cooling+ faN8 - Must fititng Radiator Heartsink when Power ON,not resposible for Burn Peltier if Heartsink is not Assemble. Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor Technologies and electronic assembly techniques.
- 2Pcs 40X40mm Thermoelectric Generator SP1848-27145 Peltier TEG Module N8E3 - 2 x SP1848-27145 Peltier TEG Module. and high quality. Soldering agent is low temperature solder (Tin-Bismuth Alloy).
- 8-Chip Air Cooling Device Thermoelectric Cooler 12V 576W Peltier Cooling Fan - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse.
- 12V DIY Thermoelectric Peltier Refrigeration Cooler Fan System Double Fan Parts - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- TEC1-12705 Thermoelectric Cooler Peltier 40*40MM 12V Peltier Elemente Module] - 1 TEC1-12705 Cooler Module. Working current: Imax = 4.3-4.6A (rated at 12V). TEC1-12705 40 40. Internal resistance: 2.5 ~ 2.8Ω (ambient temperature of 23 ± 1, 1kHZ Ac test).
- 1PC TEC1 SP1848-27145 Tec Thermoelectric Cooler Peltier Plate Module - (1x TEC1 27145 SP1848. sie können aber auch für Kühl- und/oder Heizanwendungen eingesetzt werden. Temperaturunterschied: (℃) (-4) - 120. Die Wortseite liegt nahe an der Kühlfläche (kaltes Ende). excluded.).
- Semiconductor Thermoelectric Heatsink Cooler Peltier Plate Module High Temp 150℃ - Specifications (Power input when used in Peltier Effect). Wire length:30CM. The word side is close to the cooling surface (cold end). The wordless side is stuck into the heat-absorbing surface (hot end).
- 240w Semiconductor Cooler Peltier Cooler W/ Fan DIY Air Cooling Refrigeration US - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- Thermoelectric Peltier Refrigeration Cooling System 12V Cooler Fan DIY Air Cool - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Peltier Cooling System 12V 100W Small Fast Cooling Semiconductor Cooling System - Feature: 1. Small Size: This peltier cooling system adopts small size design, which is space saving, and it can be installed anywhere, easy to install. Item Type: Peltier Cooling System. Aluminum Alloy: This semiconductor cooling system adopts premium aluminium alloy and TEC1 12706 semiconductor, highly durable.
- Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration 3 Cool Fan - Thermoelectric Peltier Refrigeration 3 Cooling Fan Semiconductor Radiator 12V US. Thermoelectric Peltier Refrigeration 3 Cooling Fan Semiconductor Radiator 12V. Semiconductor refrigerator. Power: Maximum power 210W (3 pieces of excellent 12706 chip).
- 144W 12V Semiconductor Air Conditioner Cooling System DIY Kit Cooling Refri E4V4 - Maximum power: 144W. 1 x Cooling Refrigeration Kit. Cooling power: 100W. High quality and long service life.
- 144W Thermoelectric Peltier Refrigeration Cooler 12V Semiconductor Air Cond D1W9 - Maximum power: 144W. Cooling power: 100W. 1 Air Conditioner Cooling System. Size: 51x91x55mm.
- 2Pcs 40X40mm Thermoelectric Generator SP1848-27145 Peltier TEG Module Z7B6 - 2 x SP1848-27145 Peltier TEG Module. and high quality. Soldering agent is low temperature solder (Tin-Bismuth Alloy).
- Refrigeration Thermoelectric Module Peltier Air CoolerFan Cooling System DIY Set - Refrigeration Thermoelectric Module Peltier Air CoolerFan Cooling System DIY Set.
- 8-Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device 12V 576W New - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V Semiconductor Air Cooler Thermoelectric Module Without Noise Cooling System - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- 2pcs 40mm Heatsink Kit 120mm x 40mm x 20mm Cooler Aluminum Heatsink for Cooli... - 2pcs 40mm Heatsink Kit 120mm x 40mm x 20mm, Cooler Aluminum Heatsink for Cooling LED Peltier Thermal Module Tec1-12706. 40mm Aluminum Heatsink.
- 2pcs 40mm Heatsink Kit 120mm x 40mm x 20mm Cooler Aluminum Heatsink for Cooli... - 2pcs 40mm Heatsink Kit 120mm x 40mm x 20mm, Cooler Aluminum Heatsink for Cooling LED Peltier Thermal Module Tec1-12706. 40mm Aluminum Heatsink.
- Dc 12V Semiconductor Cooling Film,Tec4-24603 4 Layer Refrigeration Thermoelect - Dc 12V Semiconductor Cooling Film,Tec4-24603 4 Layer Refrigeration Thermoelectric Cooler,15-20-30-40Mm Ceramic Thermoelectric Cooler,Computer Accessories. Cooling And Heating Functionsthermoelectric Cooler Has 2 Functions, Both Cooling And Heating.
- Thermoelectric Cooler Module, Tes1-04903 Circular Thermoelectric Cooler 5V3A T - Thermoelectric Cooler Module, Tes1-04903 Circular Thermoelectric Cooler 5V3A Temperature Difference Semiconductor Refrigeration Tablets. Current-Transducer Type Chipthe Semiconductor Refrigeration Chip Is A Curren.
- 3Pcs Tec1-12705 Semiconductor Refrigeration Tablets Tec1-12705 12V 5A Heatsink - 3Pcs Tec1-12705 Semiconductor Refrigeration Tablets Tec1-12705 12V 5A Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 40X40Mm. Easy To Install And Use. Cooling Power: Qcmax 50W.
- TEC1-12706 Thermoelectric Cooler Cooling Peltier Plate Module 12V 60WAMAZJCAURU - 1 pcs TEC1-12706 Radiator Thermoelectric Cooler. Has a wide range of applications e.g CPU cooling. Size: 40mm x 40mm x 4mm. Gets ice cold or boiling hot within minutes (you can choose by switching the polarity).
- 5x TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module Gj RU - Cooling power: Qcmax 58-65W. Size: Approx. 40mm x 40mm x 3.8mm. Each device is full inspected and tested. These devices must be used in conjunction with a heat sink to avoid burned. Power Cord: Approx.
- TEC1 12715 136.8W 12V-15.4V 15A TEC thermoelectric cooler peltier TEC1-12715 `c - 1pcs thermoelectric cooler peltier. Operates from 0~15.4V DC and 0~15A. Operates Temperature: -40 to 90.
- TEC1-12710 100W TEC1 12710 12V 10A TEC thermoelectric cooler peltier H`c - 1pcs thermoelectric cooler peltier. Operates from 0~15.2V DC and 0~10A. Operates Temperature: -30 to 70. Max power consumption: 100 Watts.
- Water Thermoelectric Peltier 50~60W Accessories System TEC1-12706 12V Cooling - (Adopt TEC1-12706 semiconductor chilling plate, good quality for use. Refrigeration Power : Max. 15V, Starting Current 5.8A). Working Current : max. =4~4.6A(Rated 12V). Fan : DC 12V. Great DIY kit for electronic enthusiasts in semiconductor cooling applications.
- Thermoelectric Peltier Cooling Fan System With Dehumidification Function For - Both having the functions of refrigeration and dehumidification. 2 x 12706A chilling plate. DIY refrigerator, can make small refrigerator, small air conditioning, the end of refrigeration can freeze.
- TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling-System DIY Kit 60W - Adopt TEC1-12706 semiconductor chilling plate, good quality for use. Refrigeration Power : Max. Great DIY kit for electronic enthusiasts in semiconductor cooling applications. Conduction Module Size : 60 45 21mm (Approx.).
- DIY Electric Cooler Cooling System Semiconductor Cooling System Kit Cooling Cooler S9L1 - Feature1: Thermoelektrische Kühlung. Premium Halbleiterkühler mit super Leistung und langer Lebensdauer. Dieser 15L Wasserkühler kann die Temperatur auf 8-10 Grad unter die normale Temperatur senken.
- 12V 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 240W 12V Semiconductor Refrigeration Cooler Thermoelectric Peltier Cold Plate US - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease.
- 288W Thermoelectric Peltier Refrigeration Cooler DC12V Semiconductor Air Co X6S5 - Maximum power: 288W. colour: blue + silver. Cooling power: 170W. Material: aluminu.
- 1 Set Air Conditioner DIY Kit Thermoelectric Peltier Cooler Refrigeration C X5R7 - Suitable for: small space cooling, learning the principle of semiconductor refrigeration, pet air conditioning, etc. 2 x fixing screws. 2x thermal adhesive. Colour:Silver+blue. 1 x water cooling heads.
- 1pcs DIY 120W TEC Peltier Semiconductor Refrigerator Water Cooling Air Conditioner I3G8 - Starker wassergekuehlter Klimaanlagenkuehler. Diese Klimaanlage ist ein Raum zum Kuehlen und Blasen von Klimaanlagen. Der Hauptmotor dient zur Kuehlung des Wassers.Es ist heiss, nicht kalt. Leistung: 120W.
- Wanbo Tripod Table Stand with 360° Adjustable Ballhead for mini C2L9
- 144W Thermoelectric Peltier Refrigeration Cooler 12V Semiconductor Air ConditiX6 - Maximum power: 144W. Cooling power: 100W. 1 Air Conditioner Cooling System. Size: 51x91x55mm.
- 2Pcs 40X40mm Thermoelectric Generator SP1848-27145 Peltier TEG Module L5C1 - 2 x SP1848-27145 Peltier TEG Module. and high quality. Soldering agent is low temperature solder (Tin-Bismuth Alloy).
- Thermoelectric Peltier Refrigeration Cooler DC12V 30A Semiconductor Air Con W9T1 - Current: 30A. 1 x Semiconductor cooling. Maximum power: 288W. Cooling power: 170W. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing.
- 12V Thermoelectric Peltier Refrigeration Air cooling System Cooler Fan DIY Kit - DIY Cooling System Kit Semiconductor Thermoelectric Peltier Refrigeration Cooling System Mini Air Conditioner Cooling System. 240W 12V Semiconductor Refrigeration Cooler Thermoelectric Peltier Cold Plate.
- 240w Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease.
- Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit 12V 240W - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- TEC1 12715 136.8W 12V-15.4V 15A TEC thermoelectric cooler peltier TEC1-1271.di - 1pcs thermoelectric cooler peltier. Operates from 0~15.4V DC and 0~15A. Operates Temperature: -40 to 90. All pictures are for illustration purpose only and Colours may vary slightly. Import Duties. You can follow below process to chontact us.
- 60W TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling System ^O.di - Must install heat sink or water-cooled radiator on the heat dissipation side; otherwise will burn the Peltier. Adopt TEC1-12706 semiconductor chilling plate, good quality for use. Semiconductor Chilling Plate: TEC1-12706.
- TEC1-12710 100W TEC1 12710 12V 10A TEC thermoelectric cooler peltier.di - 1pcs thermoelectric cooler peltier. Operates from 0~15.2V DC and 0~10A. All pictures are for illustration purpose only and Colours may vary slightly. Import Duties.
- 5x TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module.di - Cooling power: Qcmax 58-65W. You can follow below process to chontact us. Size: Approx. 40mm x 40mm x 3.8mm. Tmax(Qc=0): up to 65 ℃. Import Duties. P roduct Features Umax (V): 15V.
- TEC1-12706 Thermoelectric Cooler Cooling Peltier Plate Module 12.di - 1 pcs TEC1-12706 Radiator Thermoelectric Cooler. Has a wide range of applications e.g CPU cooling. You can follow below process to chontact us. Operates Temperature: -30 to 70. Max power consumption: 60 Watts.
- TEC1-12706 Thermoelectric Cooler Cooling Peltier Plate Module 12.'.
- 60W TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling System ^OD.'.
- Wanbo Tripod Table Stand with 360° Adjustable Ballhead for mini W0H1
- DIY Electric Cooler Cooling System Semiconductor Cooling System Kit Cooling Cooler S6V5 - Feature1: Thermoelektrische Kühlung. Premium Halbleiterkühler mit super Leistung und langer Lebensdauer. Dieser 15L Wasserkühler kann die Temperatur auf 8-10 Grad unter die normale Temperatur senken.
- 12V 6A Electric Peltier Half Conductor Cooler Cooler System Kit Kue S7W2 - 1 x Semiconductor Kaeltekuehler. Anwendung fuer Small Space Cooling, Luftkuehlung Entfeuchtung, Halbleiterkuehlung Lerntheorie usw. Arbeitsspannung: 12V. Arbeitsstrom: 6A. Stabil und praktisch.
- DIY Thermoelectric Peltier Refrigeration Cooling System Kit with Cooler Fan U9C3 - Install heat sink or -cooled on the heat dissipation side; otherwise will burn the Peltier. Adopt TEC1-12706 semiconductor chilling plate, quality for use. Semiconductor Chilling Plate: TEC1-12706. TEC1-12706: side with words is the refrigeration side, the other side is heat dissipation side.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Kü N1H8 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- 12V 6A Electric Peltier Half Conductor Cooler Cooler System Kit Kue L4X8 - 1 x Semiconductor Kaeltekuehler. Anwendung fuer Small Space Cooling, Luftkuehlung Entfeuchtung, Halbleiterkuehlung Lerntheorie usw. Arbeitsspannung: 12V. Arbeitsstrom: 6A. Stabil und praktisch.
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Eleme B8H2 - Chipmodell: TEC1-12705. 1 x thermoelektrischer Kühler Peltier. Größe: 40 x 40 x 3,8 mm. Material: Halbleiter. Farbe: weiß. Arbeitsumgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wird direkt die Kühleffizienz beeinflussen).
- 1pcs DIY 120W TEC Peltier Semiconductor Refrigerator Water Cooling Air Conditioner B2H6 - Starker wassergekuehlter Klimaanlagenkuehler. Diese Klimaanlage ist ein Raum zum Kuehlen und Blasen von Klimaanlagen. Der Hauptmotor dient zur Kuehlung des Wassers.Es ist heiss, nicht kalt. Leistung: 120W.
- 12V Peltier Cooler Triple-Core Semiconductor Air Cooling Refrigeration DIY - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 240W Refrigeration Plate Cooler Semiconductor Peltier Cold Cooling Fan 12V New - 240W Semiconductor Refrigeration Thermoelectric Peltier Cold Plate Cooler w/Fan. 240W semiconductor cooler with fan. Power: Maximum power of 240W at 15.4 V. 1 240W semiconductor cooler with fan. How to use: Place the cooling product on the smooth surface of the semiconductor refrigeration plate.
- 1 Set Air Conditioner DIY Kit Thermoelectric Peltier Cooler Refrigeration CooG5
- 2X (TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Eleme8) - 2X(Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler). Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- DIY kits Thermoelectric Peltier Refrigeration Cooling System Water cooling+ faL9
- Serial Connection Cylindrical 3x 1.5V AA Battery Plastic Holder 5 Pcs B3F3F3
- 2X (TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Eleme8) - 2X(Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler). Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- 1Pcs DC12V Semiconductor Fridge/Refrigeration Cooling System DIY Kit Mini GS - Mini conditioner for pet or little fridge. High cooling efficiency, easily cooling down within 20 minutes. You can make cooling system for yourself, easy and funny. 1 x Cooling System Kit. Compact size can be installed anywhere, easy installation.
- 60W TEC1-12706 Thermoelectric Cooler Fan Peltier Cooling System DIY Kit C2S1 - Install heat sink or -cooled on the heat dissipation side; otherwise will burn the Peltier. Adopt TEC1-12706 semiconductor chilling plate, quality for use. Semiconductor Chilling Plate: TEC1-12706. TEC1-12706: side with words is the refrigeration side, the other side is heat dissipation side.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Cooler Cooler G3 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- 144W Thermoelectric Peltier Refrigeration Cooler 12V Semiconductor Air ConditiW9
- 180W Trinuclear Thermoelectric Peltier Refrigeration Air Cooling System Kit L0M4 - Trinuclear Thermoelectric Peltier Refrigeration Air Cooling System, for small space cooling. 1 Thermoelectric Refrigeration. : 180W (Max). Refrigeration : 126W. Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor technologies and electronic assembly techniques.
- 1 Set Air Conditioner DIY Kit Thermoelectric Peltier Cooler Refrigeration CooD9
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier ElementsQ5 - Chipmodell: TEC1-12705. 1 x thermoelektrischer Kühler Peltier. Größe: 40 x 40 x 3,8 mm. Material: Halbleiter. Farbe: weiß. Arbeitsumgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wird direkt die Kühleffizienz beeinflussen).
- Wanbo Tripod Table Stand with 360° Adjustable Ballhead for mini B5L8
- TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 ElementsA8 - Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler. Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- TEC2-19003 Thermoelectric Cooler Peltier 30X30Mm 19003 Dual Elements ModV1 - Modell: TEC2-19003. Typ: Thermoelektrischer Kühler Peltier. 1 x thermoelektrischer Kühler Peltier. Material: Halbleiter.
- 60W TEC1-12706 Thermoelectric Cooler Fan Peltier Cooling System DIY Kit N9Q9 - Install heat sink or -cooled on the heat dissipation side; otherwise will burn the Peltier. Adopt TEC1-12706 semiconductor chilling plate, quality for use. Semiconductor Chilling Plate: TEC1-12706. TEC1-12706: side with words is the refrigeration side, the other side is heat dissipation side.
- 12V Semiconductor Refrigeration Cooler DIY Peltier Module Cooling Fan 210W - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Elements X5V4 - 1 x Thermoelectric Cooler Peltier. Size: 40 x 40 x 3.8mm. Material: semiconductor. Colour: white.
- 2 Pcs 40mm Heatsink Kit 120mm x 40mm x 20mm, Cooler Aluminum Heatsink for CoolH7 - 40mm Aluminum Heatsink.
- 180W Trinuclear Thermoelectric Peltier Refrigeration Air Cooling System Kit K9W5 - Trinuclear Thermoelectric Peltier Refrigeration Air Cooling System, for small space cooling. 1 Thermoelectric Refrigeration. : 180W (Max). Refrigeration : 126W. Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor technologies and electronic assembly techniques.
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier ElementsG4 - Chipmodell: TEC1-12705. 1 x thermoelektrischer Kühler Peltier. Größe: 40 x 40 x 3,8 mm. Material: Halbleiter. Farbe: weiß. Arbeitsumgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wird direkt die Kühleffizienz beeinflussen).
- 144W Thermoelectric Peltier Refrigeration Cooler 12V Semiconductor Air ConditiV2 - Maximum power: 144W. 1 x Cooler. colour: silver + blue. Cooling power: 100W.
- 12V 240W Peltier Cold Plate Cooler ,4 Cold Cooling Plate Cooler With Fan 20*22cm - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 180W Trinuclear Thermoelectric Peltier Refrigeration Air Cooling System Kit O1L1 - Trinuclear Thermoelectric Peltier Refrigeration Air Cooling System, for small space cooling. 1 Thermoelectric Refrigeration. : 180W (Max). Refrigeration : 126W. Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor technologies and electronic assembly techniques.
- TEC1-12704 Thermoelectric Cooler Peltier 30mmx30mm TEC1 12704 Elements Module W8 - 1 x Thermoelectric Cooler Peltier. Size: 30 x 30 x 3.2mm. Material: semiconductor. Colour: white. Internal resistance: 2.5~3.5 ohm (ambient temperature 23 +/- 1℃, 1kHZ Ac test). Assembly pressure: 85N/cm2.
- 1PC TEC1-12704 12V Heatsink TEC Thermoelectric Cooler Cooling Peltier 30mm*30mm - 1 x Slim TES1-12704 12V Heatsink TEC Thermoelectric Cooler Peltier 30mm 30mm. Ceramics thermoelectric Cooler semiconductor module TES1-12704. Can be used in refrigerator,Portable cooling car box. Liquid Cooling,Temperature stabilizer etc.
- 12V Slim TES1-12704 Heatsink TEC Thermoelectric Cooler Peltier 30mm*30mm - Ceramics thermoelectric Cooler semiconductor module TES1-12704. Slim and compact. Should use with a heat sink. Color: White. Cable length: 20cm. Material: Ceramics. QM(W):36.5 W. ΔTmax(℃)≥66.
- 576W Thermoelectric Peltier Cooler Air Cooling DIY 8-Chip 12V For Refrigeration - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse.
- 12V Slim TES1-12704 30mm*30mm Heatsink TEC Thermoelectric Cooler Peltier - 1 x Slim TES1-12704 12V Heatsink TEC Thermoelectric Cooler Peltier 30mm 30mm. Ceramics thermoelectric Cooler semiconductor module TES1-12704. Model number: TES1-12704. Nano Sheild. Should use with a heat sink.
- 1 Set Air Conditioner DIY Kit Thermoelectric Peltier Cooler Refrigeration CooV3 - Suitable for: small space cooling, learning the principle of semiconductor refrigeration, pet air conditioning, etc. 2 x fixing screws. 2x thermal adhesive. Colour:Silver+blue. 1 x water cooling heads.
- Refrigeration Chip Air Cooling Refrigeration Semiconductor Peltier Cooler DC12V - Semiconductor refrigerator Power: Maximum power 210W (3 pieces of excellent 12706 chip) Maximum current: 18A Supply voltage: DC12V Product size: length 300MM* width: 118MM* height 98MM Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan. Product features: high-quality refrigeration chip, aluminum profile + large wind fan heat dissipation, small size, high cooling efficiency, power-on cooling, semiconductor will vary with the size of the external environment thermometer, so be sure to choose the box, do a good job In order to have a better.
- 10PCS Slim TEC1-12704 12V Heatsink TEC Thermoelectric Cooler Peltier 30x30mm New - Ceramics thermoelectric Cooler semiconductor module TEC1-12704. Slim and compact. Should use with a heat sink. Color: White. Cable length: 20cm. Material: Ceramics.
- 10PCS Slim TEC1-12704 12V Heatsink TEC Thermoelectric Cooler Peltier 30x30mm New - Ceramics thermoelectric Cooler semiconductor module TEC1-12704. Slim and compact. Should use with a heat sink. Couples: 127. QM(W):36.5 W. Model number: TEC1-12704. ΔTmax(℃)≥66. Simple to install and operate.
- 10PC Slim TEC1-12704 12V Heatsink TEC Thermoelectric Cooler Peltier 30x30mm Best - Ceramics thermoelectric Cooler semiconductor module TEC1-12704. Slim and compact. Should use with a heat sink. Simple to install and operate. All products are quality checked. We will be happy to resolve any issues you may have in a cordial and friendly manner.
- 12V Semiconductor Module Thermoelectric Peltier Cooler Cooling Fan Refrigeration - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current:Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Serial Connection Cylindrical 3x 1.5V AA Battery Plastic Holder 5 Pcs K3S4S4
- DIY kits Thermoelectric Peltier Refrigeration Cooling System Water cooling+ faT8
- 300W Thermoelectric Peltier Refrigerator DC12V Semiconductor Air Conditioners K N7G2 - 1 x Kühler. Farbe: Wie abgebildet. Größe: 255 mm x 60 mm x 60 mm. Kühlleistung: 300 W.
- Thermoelectric Peltier Refrigeration Cooler Air Conditioner Cooling DC12V 288W - 288W Thermoelectric Peltier Refrigeration Cooler DC12V Semiconductor Air Conditioner Cooling System DIY Kit. Maximum power: 288W. 240W 12V Semiconductor Refrigeration Cooler Thermoelectric Peltier Cold Plate.
- 12V 6A Electric Peltier Half Conductor Cooler Cooler System Kit Kue L8K2 - 1 x Semiconductor Kaeltekuehler. Anwendung fuer Small Space Cooling, Luftkuehlung Entfeuchtung, Halbleiterkuehlung Lerntheorie usw. Arbeitsspannung: 12V. Arbeitsstrom: 6A. Stabil und praktisch.
- 12V 576W 8 Chip Aluminum TEC1-12706 Low Noise Peltier DIY Thermoelectric Cooler - Power: maximum power 576W (8 chip) 15.4 V. 1 PC x DIY Thermoelectric Cooler. No refrigerant required: Stable work and low noise, no refrigerant required. Material: Plastic, Aluminum. Wide use: Can used for plate cooling, pet bed cooling, small space cooling.
- 144W Thermoelectric Peltier Refrigeration Cooler 12V Semiconductor Air Cond S3O6 - Maximum power: 144W. 1 x Cooler. colour: silver + blue. Cooling power: 100W.
- 300W Thermoelectric Peltier Cooling Cooler DC12V Semiconductor Air Conditioners K V7M9 - 1 x Kühler. Farbe: Wie abgebildet. Größe: 255 mm x 60 mm x 60 mm. Kühlleistung: 300 W.
- 1pcs DIY 120W TEC Peltier Semiconductor Refrigerator Water Cooling Air Conditioner W5F7 - Starker wassergekuehlter Klimaanlagenkuehler. Diese Klimaanlage ist ein Raum zum Kuehlen und Blasen von Klimaanlagen. Der Hauptmotor dient zur Kuehlung des Wassers.Es ist heiss, nicht kalt. Leistung: 120W.
- Thermoelectric Peltier Cooler Refrigeration DC 12V Semiconductor Air Condit Q5Z8 - This semiconductor cooler is a form of solid state cooling that incorporates both semiconductor technologies and electronic assembly techniques. It can be used as a Pet Air Conditioner (chicken, little dog, etc.) or little fridge.
- 12V Cooling Semiconductor 72W Refrigeration System Air Conditioning Cooling S9I3 - Power Consumption: 72W. High cooling efficiency, easily cooling down within 20 minutes. You can make cooling system for yourself, easy and funny. 1 x Cooling System Kit. Mini air conditioner for pet or little fridge.
- 1pcs DIY 120W TEC Peltier Semiconductor Refrigerator Water Cooling Air Conditioning V6V7 - Starker wassergekuehlter Klimaanlagenkuehler. Diese Klimaanlage ist ein Raum zum Kuehlen und Blasen von Klimaanlagen. Der Hauptmotor dient zur Kuehlung des Wassers.Es ist heiss, nicht kalt. Leistung: 120W.
- 288W Thermoelectric Peltier Refrigeration Cooler DC12V Semiconductor Air CondiY2 - Maximum power: 288W. colour: blue + silver. Cooling power: 170W. Material: aluminu.
- DIY kits Thermoelectric Peltier Refrigeration Cooling System Water cooling+ faW4 - Must fititng Radiator Heartsink when Power ON,not resposible for Burn Peltier if Heartsink is not Assemble. Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor Technologies and electronic assembly techniques.
- 144W Thermoelectric Peltier Refrigeration Cooler 12V Semiconductor Air ConditiD6 - Maximum power: 144W. Cooling power: 100W. 1 Air Conditioner Cooling System. Size: 51x91x55mm.
- Comimark 2Pcs 40x40mm Thermoelectric Power Generator SP1848-27145 Peltier TEG... - 2 X Thermoelectric Power Module. Thermal conductivity (K): 15~16x10-3-W/C cm. Thermal conductivity (K): 15~16x10-3-W/℃ cm. Conductivity: 850~1250Ω -1. Red wire to positive, black wire to the negative, it generate electricity when the temperature difference happened.
- Quality THERMOTECH TEC1-12706 Thermoelectric Cooler Peltier 12V/USA brand new! - These TEC1-12706 60W 12V Peltier thermoelectric coolers are perfect for application. As with all TECs, this cooler must be mounted to a heatsink before applying power to it. - Working current: 4.3-4.6 A (rated 12V); Imax: 6A.
- 2 Pcs 40mm Heatsink Kit Cooler Aluminum Heatsink for Cooling LED Peltier Thermal - 2pcs 40mm Heatsink Kit 120mm x 40mm x 20mm, Cooler Aluminum Heatsink for Cooling LED Peltier Thermal Module Tec1-12706. 40mm Aluminum Heatsink.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor E4R1 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Eleme Y6S5 - Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler. Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Eleme D2M3 - Chipmodell: TEC1-12705. 1 x thermoelektrischer Kühler Peltier. Größe: 40 x 40 x 3,8 mm. Material: Halbleiter. Farbe: weiß. Arbeitsumgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wird direkt die Kühleffizienz beeinflussen).
- 1pcs DIY 120W TEC Peltier Semiconductor Refrigerator Water Cooling Air Conditioner L8B4 - Starker wassergekuehlter Klimaanlagenkuehler. Diese Klimaanlage ist ein Raum zum Kuehlen und Blasen von Klimaanlagen. Der Hauptmotor dient zur Kuehlung des Wassers.Es ist heiss, nicht kalt. Leistung: 120W.
- DC 5Vue9.4W Thermoelectric Cooler Peltier Cooler Cooling W9D8 - Thermoelectrischer Kuehlung Modul. 1 x Thermoelectrischer Kuehler. Umweltfreundlich, keine Kuehl Fluessigkeit ist benutzt. Kuehlung oder Heitzung durch Veraenderung der Stromrichtung. Kuehlungspower:ue9,4W.
- 12V Semiconductor Refrigeration Cooler DIY Peltier Module Cooling Fan 210W - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 240W Semiconductor Refrigeration Cooler Thermoelectric Peltier Cold Mini Fan 12V - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease.
- Semiconductor Refrigeration Peltier Cooler DIY Air Conditioning Cooling Fan 140W - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 12A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- TEC1-12704 Thermoelectric Cooler Peltier 30mmx30mm TEC1 12704 Elements Module Y5 - 1 x Thermoelectric Cooler Peltier. Size: 30 x 30 x 3.2mm. Material: semiconductor. Colour: white. Internal resistance: 2.5~3.5 ohm (ambient temperature 23 +/- 1℃, 1kHZ Ac test). Assembly pressure: 85N/cm2.
- 240W 12V Semiconductor Refrigeration Cooler Thermoelectric Peltier Cold Plate - Semiconductor Refrigeration Plate 240W Semiconductor Refrigeration Thermoelectric Peltier Cold Plate with Fan Semiconductor. 1 x Semiconductor Refrigeration Plate. Stable work and low noise, no refrigerant required.
- Semiconductor Cooling Fan Refrigeration Thermoelectric Cooler Cooling Equipment - 3-Chip 12V Semiconductor Refrigeration Thermoelectric Cooler Device 210W USA Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- TEC1-12710 100W TEC1 12710 12V 10A TEC thermoelectric cooler peltier.IT - 1pcs thermoelectric cooler peltier. Operates from 0~15.2V DC and 0~10A. All pictures are for illustration purpose only and Colours may vary slightly. Color: White. Import Duties.
- TEC1-12705 Thermoelectric Cooler Peltier 40*40MM 12V Peltier Elemente MoY~IT - Working current: Imax = 4.3-4.6A (rated at 12V). 1 TEC1-12705 Cooler Module. TEC1-12705 40 40. Internal resistance: 2.5 ~ 2.8Ω (ambient temperature of 23 ± 1, 1kHZ Ac test). Maximum temperature: Tmax (Qc = 0) over 67.
- TEC1 12715 136.8W 12V-15.4V 15A TEC thermoelectric cooler peltier TEC1-12715~L6 - 1pcs thermoelectric cooler peltier. Operates from 0~15.4V DC and 0~15A. Operates Temperature: -40 to 90. Color: White. Original box: NO.
- TEC1-12706 Thermoelectric Cooler Cooling Peltier Plate Module 12V ^L6 - 1 pcs TEC1-12706 Radiator Thermoelectric Cooler. Has a wide range of applications e.g CPU cooling. Size: 40mm x 40mm x 4mm. Gets ice cold or boiling hot within minutes (you can choose by switching the polarity).
- 5x TEC1-12706 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module F^L6 - Cooling power: Qcmax 58-65W. Size: Approx. 40mm x 40mm x 3.8mm. Each device is full inspected and tested. These devices must be used in conjunction with a heat sink to avoid burned. Power Cord: Approx.
- TEC1-12710 100W TEC1 12710 12V 10A TEC thermoelectric cooler peltier.L6 - 1pcs thermoelectric cooler peltier. Operates from 0~15.2V DC and 0~10A. All pictures are for illustration purpose only and Colours may vary slightly. Import Duties.
- Thermoelectric Peltier Refrigeration Cooler Fan DIY Air Cooling Kit 72W 12V US - This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. Parameter: Working voltage: 12V Maximum power: 72W Maximum current: 4-6A Product size: 118*100*68MM Package includes: 1*DIY semiconductor air cooling kit.
- Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Double Fan - Type: semiconductor cooling fan. 1x cooling fan. Function: cooling. Special bottom design for improved heat transfer efficiency. Typesemiconductor cooling fan. Silent design for easy installation.
- 12V Semiconductor Air Cooler Thermoelectric Module Cooling System Without Noise - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit New - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 12A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - 12V DIY Thermoelectric Cooler Refrigeration Device 8-Chip TEC1-12706 576W. Power: 576w. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold.
- TEC1-12706 Thermoelectric Peltier Module Water-Cooler Cooling System DIY-Kit - Adopt TEC1-12706 semiconductor chilling plate, good quality for use. Refrigeration Power : Max. Great DIY kit for electronic enthusiasts in semiconductor cooling applications. Conduction Module Size : 60 45 21mm (Approx.).
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit New - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- TEC1-12706 12712 Thermoelectric Peltier Cooler Cooling Heatsink Module 12 Volt - The working state of the cold piece is that one side is cooling and the other is heating. The heating surface must be well dissipated during work. A radiator or a water cooling device must be installed on the heat dissipation surface, otherwise it will burn.
- 40*40mm TEC1 12703-12712 Thermoelectric Cooler Cooling Peltier Plate Module 12V - 40 40mm TEC1 12703 12715 heat sink thermoelectric cooler cooling Peltier plate. 40mm x 40mm x 3.3mm. 40mm x 40mm x 4mm. TEC1-12703(40 40mm). TEC1-12704(40 40mm). TEC1-12705(40 40mm). TEC1-12706(40 40mm).
- 50,100,150,200,300W Refrigeration Cooling Air Cooling Radiator DIY Fridge Cooler - Rated power: 50W, 100W, 150W, 200W, 300W. High and long service life. Semiconductor aluminum plate cooling table, powerful and fast cooling. Rapid cooling, excellent cooling effect. Ideal for space cooling.
- Laird LA-051-24-00-00-SB 7DE-00256 PAPST VD-1-43.10 937 4310 523
- Semiconductor Refrigeration Thermoelectric Peltier Cold Plate Cooler with Fan - Semiconductor Refrigeration Thermoelectric Peltier Cold Plate Cooler with Fan for Making Small Fridge. The peltier heatsink can be used to make small fridge, mini air conditioner or cooling device for pet.
- Thermoelectric Refrigeration Peltier Cooling System Cooler DIY Kit For Fridge - Item Type: Peltier Thermoelectric Refrigeration Cooler. Cooling Fan: Peltier refrigeration cooling system uses a fan to dissipate heat, which is fast and practical, and easy to use. Feature: 1. Low Noise: This thermoelectric cooler uses semiconductors to ensure a good cooling effect.
- 144W Thermoelectric Peltier Refrigeration Cooler 12V Cooling System For Fridge - Feature: 1. Item Type: Peltier Thermoelectric Refrigeration Cooler. Cooling Fan: Peltier refrigeration cooling system uses a fan to dissipate heat, which is fast and practical, and easy to use. Maximum Power: 144W.
- DC 5Vue9.4W Thermoelectric Cooler Peltier Cooler Cooling F4P4 - Thermoelectrischer Kuehlung Modul. 1 x Thermoelectrischer Kuehler. Umweltfreundlich, keine Kuehl Fluessigkeit ist benutzt. Kuehlung oder Heitzung durch Veraenderung der Stromrichtung. Kuehlungspower:ue9,4W.
- TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Eleme L6R3 - Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler. Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- TEC1-12704 Thermoelectric Cooler Peltier 30mmx30mm TEC1 12704 Elements Modu O5X3 - 1 x Thermoelectric Cooler Peltier. Size: 30 x 30 x 3.2mm. Material: semiconductor. Colour: white. Assembly pressure: 85N/cm2.
- Semiconductor Refrigeration Cooler Thermoelectric Peltier Cold Plate 240W SALE! - 240W 12V Semiconductor Refrigeration Cooler Thermoelectric Peltier Cold Plate US Product Description 240W semiconductor cooler with fan 240W Semiconductor Refrigeration Thermoelectric Peltier Cold Plate Cooler w/Fan Feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product cooling plate size：20*22cm Product composition: 4 cooling plates,.
- Refrigeration Cooling System Kit Semiconductor Air Cooling Device Portable 288W - Maximum Power: 288W. Use Scenario: Semiconductor air cooling device is suitable for 20L space cooling, the air temperature can be cooled by 5‑8℃ compared to the normal temperature. Easy To Use: This refrigeration cooling system kit is a finished product, no assembly required, stable work, low noise, no refrigerant required.
- 240W Refrigeration Plate Cooler Semiconductor Peltier Cold Cooling Fan Home US - Product Specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product cooling plate size：20*22cm Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semiconductor refrigeration plate The Package Includes: 1*240W semiconductor cooler with fan.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit New - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- 240W Semiconductor Refrigeration Peltier 4 Cold Cooling Plate Cooler Fan 12V USA - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Set ❕ - It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- TEC1 12715 136.8W 12V-15.4V 15A TEC thermoelectric cooler peltier TEC1-12715-b - Included:1pcs thermoelectric cooler peltier. Operates from 0~15.4V DC and 0~15A. Operates Temperature: -40 to 90. Original box: NO. Cooling power: 142W (cooling power will be reduced if the temperature of cooling surface is too high).
- TEC1-12710 100W TEC1 12710 12V 10A TEC thermoelectric peltier IOy&$i - Included:1pcs thermoelectric cooler peltier. Operates from 0~12V DC and 0~4A ;Operates Temperature: -30 to 70. Model: TEC1-12710;Size: 40mm x 40mm x 4mm.
- TEC1-12706 Thermoelectric Cooling Peltier Plate Module 12V 6Z8 - 1 pcs TEC1-12706 Radiator Thermoelectric Cooler. Has a wide range of applications e.g CPU cooling. Size: 40mm x 40mm x 4mm. Gets ice cold or boiling hot within minutes (you can choose by switching the polarity).
- 12V 72W Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Fan - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- 4Chip Refrigeration Kit Thermoelectric Peltier Water Cooling Decive Plate + fan - Cooling plate + fan. Note: This set is water cooling is not used to cool water. Cooling power: 170W. The hot end uses water circulation to cool the semiconductor hot surface. Your satis faction is our ultimate goal.
- 240W Refrigeration Plate Cooler Semiconductor Peltier Cold Cooling Fan Home 12V - Product Specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product cooling plate size：20*22cm Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semiconductor refrigeration plate The Package Includes: 1*240W semiconductor cooler with fan.
- 240W Semiconductor Fan Cooler Refrigeration Thermoelectric Peltier Cold Plate - 240w Semiconductor Refrigeration Thermoelectric Peltier Cold Plate Cooler W/Fan. 240w Semiconductor Cooler with Fan. Power: Maximum Power of 240w at 15.4 V. 1 240w Semiconductor Cooler with Fan. How to Use: Place the Cooling Product on the Smooth Surface of the Semiconductor Refrigeration Plate.
- Peltier Cooler Semiconductor Cooling Fan Air Cooling Refrigeration DIY 210W US - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- Quality THERMOTECH TEC1-12706 Thermoelectric Cooler Peltier 12V/USA brand new! 9 - Quality THERMOTECH TEC1-12706 Thermoelectric Cooler Peltier 12V/USA brand new!. 7 brand you 2 open, 9 all together.
- 1Pcs DC12V Semiconductor Fridge/Refrigeration Cooling System DIY Kit Mini HG - Mini conditioner for pet or little fridge. High cooling efficiency, easily cooling down within 20 minutes. You can make cooling system for yourself, easy and funny. 1 x Cooling System Kit. Compact size can be installed anywhere, easy installation.
- Peltier Thermoelectric Cooler DC12V 30A Semiconductor Air Conditioning Cooling System L1M1 - Strom: 30A. Farbe:Wie abgebildet. Kühlleistung: 170W.
- 1pcs 200 X 115 X 8.5mm 120W Thermoelectric Peltier Cooling Semiconductor N1E9 - Farbe: Silber. Einfach zu verdrahten, stabil und geräuscharm zu arbeiten. 1 Thermoelektrischer Kühler. Dieses Halbleiter-Kältekühler-DIY-Kit verwendet Halbleiter für einen guten Kühleffekt, es verwendet Lüfter zum Kühlen, schnell praktisch, bequem zu bedienen.
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Elements Z4D5 - 1 x Thermoelectric Cooler Peltier. Size: 40 x 40 x 3.8mm. Material: semiconductor. Colour: white.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY! - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- DIY Semiconductor Air Cooling Kit Thermoelectric Peltier Refrigeration Cooler - This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. parameter: Working voltage: 12V Maximum power: 72W Maximum current: 4-6A Product size: 118*100*68MM The package includes: 1*DIY semiconductor air cooling kit.
- 576w 8 Chip Refriger Thermoelectric Peltier Cooler Water Cooling System DIY - What's Included? 1*Diy Cooler This Product Is Only a Refrigerator, You Need to Prepare the Following Accessories: 1.12v 50a Power Supply 1 (or 12v 30a Power Supply 2) 2.360 Sets of Cooling Water Drains (Including Cooling Fan + Protection Net Cover) 3. Pump One 4. Water Pipe 5m (Inner Diameter 8mm) 5. 10 Buckles (M11), If There Is a Tie, It Can Be Replaced 6. Water Tank One 7. Power Cord 1 8. Connecting Line 1.5 Square Meters 2 Meters (Prevention Line Is Not Long Enough, Extension Line) Specifications Core: 8*Tec1-12706a Cooling Method: Water Cooling Appearance Size: 200*90*60mm Power: 576w Support Space: 1-2 Squares Temperature Difference 8-13 Degrees Celsius Red Line: "+", Black Line: "-" Power Supply Requirements: 12v700w Power Supply.
- Thermoelectric Peltier Refrigeration Cooling System Kit Cooler Fan DIY Kit 12V - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- 576W 12V 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 4 Chip Refrigerator Water Circulation Cooling Device Semiconductor Refrigeration - 12V 4-Chip DIY Thermoelectric Peltier Cooler Air Cooling Device USA STOCK 【Product parameters】 Maximum power: 288W (15.4V) Maximum current: 24A Rated voltage: DC 12V Current Rating: 17A Cooling power: 170W Product size: length 180MM* width 65MM* height 62MM Power supply above 12V/30A Note: This set is water cooling is not used to cool water Connection method: Cooling plate + fan Red line connected to the power supply 12V positive Black line connected to the power supply 12V negative Features: * 2 calibers are 9mm, and can be connected to the inner diameter of 8nn water pipes. * The hot end uses water circulation to cool the semiconductor hot surface. *Connection method The package includes: 1*4 chip refrigerator.
- 240W Semiconductor Cooler Fan Thermoelectric Refrigeration Cooling Cold Plate - Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product cooling plate size：20*22cm Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semiconductor refrigeration plate The package includes: 1*240W semiconductor cooler with fan.
- Refrigeration Thermoelectric Module Peltier Air CoolerFan Cooling System DIY Set - Refrigeration Thermoelectric Module Peltier Air CoolerFan Cooling System DIY Set.
- 576W 8-Chip TEC1-12706A DIY Thermoelectric Peltier Cooler Air Cooling Device TOP - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 253W 62mm L Thermoelectric Peltier Cooler CPU Car Video Card TEC1-12730 - Feature: Solid state, vibration free, noise-free. Simple to install and operate. Each device is fully inspected and tested. Fitted with 2.85 inch insulated leads . Perimeter sealer for moisture cover. This device must be used in conjunction with a heat sink to avoid burned. Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications such as cooling your CPU, video card, laser diode, alternate power sources, or even for your own custom warmer/cooler. Since they consit primarily of semiconductor material sandwiched between ceramic plates and have no moving parts..
- Refrigeration Thermoelectric Module Peltier Air Cooler Cooling System DIY Kit US - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- C187352 Teca ThermoElectric Cooling D94002 Lab Cold Plate 6"x 4.5" w/ Controller - It powers up, and the chill plate gets frosty cold, as shown. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
- C187369 Teca ThermoElectric Cooling AHP-301CP Lab Cold Chill Plate (6" x 4.5") - It powers up, and the chill plate gets frosty cold, as shown.
- TEC2-19003 Thermoelectric Cooler Peltier 30X30mm 19003 Elements Module Electrh - Type: Thermoelectric Cooler Peltier. 1 x Thermoelectric Cooler Peltier. Size: 30 x 30mm. Material: semiconductor.
- Peltier Thermoelectric Cooler DC12V 30A Semiconductor Air Conditioning Cooling System S4H6 - Strom: 30A. Farbe:Wie abgebildet. Kühlleistung: 170W.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Kü P3T6 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- Semiconductor Cooling Fan 12v Thermoelectric Peltier Air Cooler System Diy Kit - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit Tool - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A；Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V Peltier Cooler 140W Air Conditioner Aluminum DIY Kit Refrigeration Cooling - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 12A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 4 Chip Refrigerator Thermoelectric Peltier Cooler Water Cooling Device 12V 288W - High Power : It uses high-end semiconductor cooling maximum power of 288w, effectively improving cooling efficiency. Maximum Power: 288W (15.4V). This semiconductor refrigeration machine uses high-end semiconductor heat dissipation technology and high-quality refrigeration tablets to provide you with an efficient and powerful cooling effect.
- 576W DIY Thermoelectric Peltier Cooler Air Cooling Device TOP 8-Chip TEC1-12706A - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- DIY Kit 8 Chip TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling Fan - Can Be Used for Plate Cooling, Pet Bed Cooling, Test Bench, Small Space Cooling. Air Cooling Device, Not Used for Cooling Water, Uses Water to Dissipate Heat, and Finally the Water Is Hot, Not Cold.
- 240W Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan~ - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 240w Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 576W 8-Chip TEC1-12706A DIY Thermoelectric Peltier Cooler Air Cooling Device TOP - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 576W 8-Chip DIY Thermoelectric Peltier Cooler Air Cooling Device TEC1-12706A US - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit 240W - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 240W 12V Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- Air Cooling Devices DIY Thermoelectric Peltier Cooler For Small Space Cooling - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- Thermoelectric Peltier Refrigeration Cooling System Cooler Fan 12V DIY Kit New - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- 12V 576W 8-Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device - 8-Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device 12V 576W. Power: 576w. DIY Thermoelectric Peltier Cooler Air Cooling Devices. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold.
- 12V 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit - 12V Semiconductor Refrigeration DIY Peltier Cooler Cooling Fan Module Kit 140W. ❖ Power: 140W Maximum (Normal 120W). ✔ 1x Cooling Fan. ❖ Type:Air Cooling. ❖ Function: Cooling. ★ Special bottom design for improved heat transfer efficiency.
- 576W 8-Chip TEC1-12706A DIY Thermoelectric Peltier Cooler Air Cooling Device TOP - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- TEC1-12706 Thermoelectric Peltier Module Water Cooler Cooling System DIY-Kit - Adopt TEC1-12706 semiconductor chilling plate, good quality for use. Refrigeration Power : Max. Great DIY kit for electronic enthusiasts in semiconductor cooling applications. Conduction Module Size : 60 45 21mm (Approx.).
- TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Eleme U6Z8 - Chipmodell: TEC1-12705. 1 x thermoelektrischer Kühler Peltier. Größe: 40 x 40 x 3,8 mm. Material: Halbleiter. Farbe: weiß. Arbeitsumgebung: Temperaturbereich -55 ℃ ~ 83 ℃ (zu hohe Umgebungstemperatur wird direkt die Kühleffizienz beeinflussen).
- 120 DIY Mini Fridge - With the wide applications of semiconductor cooling, more and more DIY enthusiasts are interested in it. Great product for electronic enthusiasts in DIY semiconductor cooling system. We'd like to settle any problem in a friendly manner.
- Peltier Thermoelectric Cooler DC12V 30A Semiconductor Air Conditioning Cooling System T5W6 - Strom: 30A. Farbe:Wie abgebildet. Kühlleistung: 170W.
- TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Eleme Z1L3 - Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler. Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- 1PCS Slim TES1-12704 12V Heatsink TEC Thermoelectric Cooler Peltier 30mm*30mm
- -12706 12V 60W - It's just take you 1 minute. We'd like to settle any problem in a friendly manner. Because the unpaid dispute will not be closed automatically, and we may ignore it. 1 Piece -12706.
- 1pc 12V Cooling Module 40x40mm - 12705 Cooling Plate Module 12V 5A. U=standard(V): 12V. Semiconductor s are a form of solid state cooling that incorporates both semiconductor technologies and electronic assembly techniques. Cooling power :Qcmax 45W.
- DC12V Semiconductor Refrigeration - Semiconductor s are a form of solid state cooling that incorporates both semiconductor Technologies and electronic assembly techniques. 1 Set of Refrigeration Cooling System. It's just take you 1 minute.
- DIY Cooler Kit 12V Semiconductor Cooling System Heatsink Module kit+Fan 420W - Power : 420W. Application : DIY electric semiconductor refrigeration radiator machine can be used in small space cooling, pet air conditioner, learning the principle of semiconductor refrigeration and more.
- Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit 240W 12V - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 240w Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 4 Chip Thermoelectric Peltier Cooler Water Cooling Refrigeration System 12V USA - 【Product Parameters】 Maximum Power: 288w (15.4v) Maximum Current: 24a Rated Voltage: Dc 12v Current Rating: 17a Cooling Power: 170w Product Size: Length 180mm* Width 65mm* Height 62mm.
- 12V DIY Thermoelectric Peltier Refrigeration Cooler Fan System Cooling 240W USA - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 240w Peltier Refrigeration Cooler Semiconductor DIY Thermoelectric Cooling Fan - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY 12V - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V 576W 8 Chip TEC1-12706 Thermoelectric Peltier Cooler Air Cooling Device DIY - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- Cooling Module 12V Semiconductor Refrigeration Air Cooling Kit + TEC1-12706 - An excellent DIY kit for electronic enthusiasts in semiconductor refrigeration applications, suitable for computer radiators and cooling in small spaces. Using high-quality aluminum + TEC1-12706 semiconductor cooling plate, durable.
- Peltier Cooler Semiconductor Cooling Fan Air Cooling Refrigeration DIY 210W - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- Semiconductor Refrigeration Cooler Thermoelectric Peltier Cold Plate 240W SALE! - 240W 12V Semiconductor Refrigeration Cooler Thermoelectric Peltier Cold Plate US Product Description 240W semiconductor cooler with fan 240W Semiconductor Refrigeration Thermoelectric Peltier Cold Plate Cooler w/Fan Feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product cooling plate size：20*22cm Product composition: 4 cooling plates,.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat Q8Q3 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- Refrigeration Thermoelectric Module Peltier air Cooler Cooling System DIY Kit - Description This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. What's included？ 1*DIY semiconductor air cooling kit Power supply requirement description: Power supply above 12V7A Dimensions Product size: 118*100*68MM Specofications Working voltage: 12V Maximum power: 72W Maximum current: 4-6A.
- Thermoelectric Cooler Refrigeration 180W Water Chiller for 40L Fish Tank 12V USA - Packing Including： 1 * Refrigerator Kit Features: 1. the Cooler Uses High-end Refrigeration Modules with High Power and Good Durability. 2. the Area of the Cooling Block Is Larger, so It Can Contact More Water for Rapid Cooling. 3. the Four Hollow Copper Tubes with Refrigerant Inside Will Quickly Transfer Heat, Thereby Improving Cooling Efficiency. Specifications: Voltage: Dc 12v Power: 180w Current: 15a (180w) Suitable for: 40l Fish Tank Size: 143 * 96 * 162mm / 5.62 * 3.77 * 6.37" Outer Diameter of Water Inlet/Outlet: 8mm / 0.31".
- Thermoelectric Cooler Peltier DIY Refrigeration Component Cooling Version 12V US - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 140W 12V 10A Peltier Cooler Semiconductor Refrigeration Air Cooling Fan Kit USA - Power: 140w Maximum (Normal 120w). Type: Semiconductor Cooling Fan. Double Fan Cooler Thermoelectric Refrigeration Cooling System Kit Cooling Fan. 1x Cooling Fan. Function: Cooling. Your satis faction is our ultimate goal.
- 576W 8-Chip TEC1-12706A DIY Thermoelectric Peltier Cooler Air Cooling Device TOP - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- NEW Semiconductor Refrigeration Cooler DIY Peltier Module Cooling Fan 210W 12V - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 12V Semiconductor Refrigeration Cooler DIY Peltier Module Cooling Fan 210W - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- TEC1-12706 ,Thermoelectric Peltier ,Module Water Cooler,Cooling System DIY Kit
- Cooling Device DIY with fan 20a 180w mini Air Conditioner - Widely Used: It can be used to make a small refrigeration, mini air conditioner or cooling devices for pets. Type: Conditioner Module with Fan. This has a better cooling effect. 1 Semiconductor Cooling.
- DIY with Fan for Pet Bed Cooling Computer Cooling - Widely Used: It can be used to make a small refrigeration, mini air conditioner or cooling devices for pets. It's just take you 1 minute. We'd like to settle any problem in a friendly manner. Type: Conditioner Module with Fan.
- DIY with Fan for Pet Bed Cooling Computer Cooling - Widely Used: It can be used to make a small refrigeration, mini air conditioner or cooling devices for pets. It's just take you 1 minute. We'd like to settle any problem in a friendly manner. Type: Conditioner Module with Fan.
- 12V Refrigeration Cooling Fan DIY Thermoelectric Peltier Cooling System Cooler - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Thermoelectric Peltier Refrigeration Cooling System Cooler Fan Kit Home 12V NEW - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V Refrigeration Cooling Fan DIY Thermoelectric Peltier Cooler Dehumidifier NEW - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Semiconductor Refrigeration Thermoelectric Cooler Diy Cooler Cooling Device 12V - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 12V Cooling Fan 3 Refrigeration Chip Semiconductor Refrigeration Cooling Fan US - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 210W 18A Semiconductor Cooling Fan Refrigeration Thermoelectric Air Cooler US - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 3-Chip Semiconductor Air Cooling Tool Semiconductor Refrigerator Air Cooling Fan - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 3-Chip Thermoelectric Semiconductor Cooling Fan Cooler Refrigeration DIY 12V US - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- New Semiconductor Cooling Fan Small Space Triple-Core Semiconductor Cooling Fan - Tricore Semiconductor Refrigeration Cooler Diy Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY USCooler Device Cooling Module Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- Triple-Core Semiconductor Refrigeration Cooler Cooling Fan For Pets Cool Down - Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- Semiconductor cooler Semiconductor Cooling Fan Semiconductor Cooling Chip+Fan - Air Cooling System Semiconductor Refrigeration Thermoelectric Cooler 210W 3 Chip Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 3-Chip Semiconductor Refrigerator Power Cooler DIY Cooler Production 12V US - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 3-Chip Semiconductor Refrigeration Thermoelectric Peltier Cooler Air Cooling 12V - Tricore Semiconductor Refrigeration Cooler Diy Cooler Device Cooling Module Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 12V 576W 8 Chip DIY Cooler Thermoelectric Peltier Module Cooler Air Cooling - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V 240W Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 12V DIY Thermoelectric Peltier Refrigeration Air Cooler Cooling System Fan Set - This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. parameter: Working voltage: 12V Maximum power: 72W Maximum current: 4-6A Product size: 118*100*68MM The package includes: 1*DIY semiconductor air cooling kit.
- Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit 12V 240W - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- 8 Chip Thermoelectric DIY Cooler Refrigerator Semiconductor Peltier Water Cooler - What's Included? 1*Diy Cooler This Product Is Only a Refrigerator, You Need to Prepare the Following Accessories: 1.12v 50a Power Supply 1 (or 12v 30a Power Supply 2) 2.360 Sets of Cooling Water Drains (Including Cooling Fan + Protection Net Cover) 3. Pump One 4. Water Pipe 5m (Inner Diameter 8mm) 5. 10 Buckles (M11), If There Is a Tie, It Can Be Replaced 6. Water Tank One 7. Power Cord 1 8. Connecting Line 1.5 Square Meters 2 Meters (Prevention Line Is Not Long Enough, Extension Line) Specifications Core: 8*Tec1-12706a Cooling Method: Water Cooling Appearance Size: 200*90*60mm Power: 576w Support Space: 1-2 Squares Temperature Difference 8-13 Degrees Celsius Red Line: "+", Black Line: "-" Power Supply Requirements: 12v700w Power Supply.
- 140W Peltier Cooler Semiconductor Refrigeration Cooling System Fan Cooler New - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Thermoelectric Peltier Semiconductor Refrigeration Cooling System Cooler Fan Kit - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Refrigeration Cooling Plate Cooler Fan cooling for Small Space Cooling 12V 240W - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 240W 12V Refrigeration Plate Cooler Semiconductor w/ Fan 4 G0 Fans 4 Mesh Cover - 240W semiconductor cooler with fan feature: Can be used for small space cooling, such as test bench cooling, flat product cooling, pet bed cooling, etc. Suitable for small space cooling, semiconductor refrigeration learning theory, research solutions for cooling equipment planning. Stable operation, low noise, no need for refrigerant. The kit is well assembled and you only need to connect it to use it. Product specifications: Voltage: 12V Power: Maximum power of 240W at 15.4 V Maximum current: 20A Steady current: 14A Product composition: 4 cooling plates, 4 G0 fans, 4 mesh covers. 4 cold-end aluminum blocks, 1 180*210nn aluminum plate, 4 sets of screws, 1 piece of 180*210 insulation cotton, 4 sets of silicone grease How to use: Place the cooling product on the smooth surface of the semicon.
- 12V 240W Thermoelectric Cooler Peltier Refrigeration Cooling System Fan Kit DIY - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- Thermoelectric Peltier Refrigeration Cooling System Fridge Cooler 12V 140W - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Thermoelectric Peltier Refrigeration Semiconductor Cooling System Fridge Cooler - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- 12V Air Cooling Thermoelectric Peltier Cooler Semiconductor Refrigeration Fan - 140W Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US It is suitable for cooling in small spaces, learning the principle of semiconductor refrigeration, and researching and developing cooling equipment for the company. Feature: * Large air volume and long life. * Silent design for easy installation. * Special bottom design for improved heat transfer efficiency. Specifications: Product Name: Semiconductor cooling fan Power: 140W Maximum (Normal 120W) Type:Air Cooling Function: Cooling Voltage: 12V Current RatingUp to 8A；Current: Up to 8A Product Size: 200MM(Length)*118MM(Width)*98MM(Height ) The package includes: 1x cooling fan.
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat X2E2 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- 240W 12V, Thermoelectric Cooler Peltier DIY Refrigeration Cooling System Fan Kit - Description: DIY semiconductor surface cooling version Product use: DIY pet space cooling, electronic refrigerators, component cooling, home board test tools, notebook cooling, etc. can be directly placed on the surface to cool down, and it can be cooled after power on. It adopts dual-chip cooling. The area of the cooling board is 200*100MM. , Easy to use. The ambient temperature is about 20°C, and the lowest surface temperature is -15°C. The lower the ambient temperature, the greater the temperature drop. The frost will begin to defrost within 2 minutes after booting. Product parameters: ❖Working voltage: 12V ❖Maximum power: 240W ❖Maximum current: 20A Package includes:.
- TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Eleme Q9D9 - Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler. Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- 2Pcs 40X40mm Thermoelectric Generator SP1848-27145 Peltier TEG Module D8L2 - 2 x SP1848-27145 Peltier TEG Module. and high quality. Soldering agent is low temperature solder (Tin-Bismuth Alloy).
- Peltier Thermoelectric Cooler Cooling DC 12V Semiconductor A/C Coat Z8U1 - Es kann als Klimaanlage für Haustiere (Huhn, kleiner Hund usw.). oder als kleiner Kühlschrank verwendet werden. Verwenden Sie einen Kühlschrank -, um die thermische Verformungsfähigkeit des Kühlschrankprodukts bei der Arbeit effektiv freizusetzen.
- Peltier Thermoelectric Cooler DC12V 30A Semiconductor Air Conditioning Cooling System G2N3 - Strom: 30A. Farbe:Wie abgebildet. Kühlleistung: 170W.
- Peltier Cooler Semiconductor Cooling Fan Air Cooling Refrigeration DIY 210W - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY Kit US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit US - 12V Thermoelectric Peltier Refrigeration Cooling System Cooler Fan DIY Kit 140W It is Suitable for Cooling in Small Spaces, Learning The Principle of Semiconductor Refrigeration, and Researching and Developing Cooling Equipment for The Company. Features: ★ Large air volume and long life. ★ Silent design for easy installation. ★ Special bottom design for improved heat transfer efficiency. Specifications: ❖ Product Name: Semiconductor cooling fan ❖ Power: 140W Maximum (Normal 120W) ❖ Type: Air Cooling ❖ Function: Cooling ❖ Voltage: 12V ❖ Current: Up to 8A ❖ Product Size: 200mm (Length)* 118mm (Width)* 98mm (Height) The Package Includes: ✔ 1x Cooling Fan Power supply requirement description: Power supply above 12V15A.
- Triple-Core Semiconductor Refrigeration Thermoelectric Cooler Cooling Fan 12V - Peltier Cooler Semiconductor Peltier Cooler Air Cooling Refrigeration DIY US Product specifications: Product Name: semiconductor cooling fan Power: Maximum power 210W (3 pieces of excellent 12706 chip) Type: Triple-Core semiconductor cooling fan Maximum current: 18A Function: Cooling Voltage: 12V Product size: Length 300mm* Width: 118mm* Height 98mm Power-on mode: 12V is only divided into positive and negative poles, red line is positive, black line is negative, and connected to electricity Uses: Small space to cool down, pets to cool down, learn the principle of semiconductor refrigeration, the company developed cooling equipment research plan.
- TEC1-12704 Thermoelectric Cooler Peltier 30mm X 30mm TEC1 12704 Eleme E8D3 - Chipmodell: TES1-12704 --TEC1-12704. 1 x Peltier für thermoelektrische Kühler. Anzahl der Komponentenpaare: 127. Drahtspezifikation: Leitungslänge 70 + / - 5 mm RV-Standarddraht-Einzelkopf 5 mm verzinnt.
- Thermoelectric Cooler Refrigeration Device 8-Chip TEC1-12706 Peltier Cooling New - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 576W 12V Thermoelectric Peltier Cooler Cooling Refrigeration Fan fit 1-2m³ - High quality and long service life. Easy to install. Durable design and superb craftsmanship for your needs Can be used for plate cooling, pet bed cooling, test bench, small space cooling. Stable operation, low noise, no need for refrigerant. Suitable for small space refrigeration, semiconductor refrigeration learning theory, research and development of refrigeration equipment planning. Air cooling device, not used for cooling water, uses water to dissipate heat, and finally the water is hot, not cold. The support space is 1-2 cubes and the temperature difference is between 8-13 degrees. Purchase Notes: This refrigerator is a cold air in the aluminum block position, and the water radiator is heat dissipation, please do not confuse. This product is only a refrigerator, you need to prepare t.
- 12V DIY Thermoelectric Peltier Refrigeration Air Cooler Cooling System Fan Set - This product is a newly manufactured DIY semiconductor air-cooled kit. It is mainly used for DIY pet coolers, small refrigerators, student textbooks, etc. (all the space required for cooling can be used for cooling), the cold end fan does not turn on the room temperature 20 degrees, the cold end aluminum sheet can form thick frost, and the electronic cooling 12V power supply is very Safe, fluorine-free, no harm to human body, and small size and quiet. parameter: Working voltage: 12V Maximum power: 72W Maximum current: 4-6A Product size: 118*100*68MM The package in