10PCS 10 Segment Digital Red LED Bar Graph Display Ultra Bright G.di - It is up to industrial standard size, low power consumption design. LED color: Red. Ultra brightness indicator light. All pictures are for illustration purpose only and Colours may vary slightly. You can follow below process to chontact us.
10x 120degree led Lens for 1W 3W High Power LED with screw 20mm Black ho.di - Lens Dimaeter: 20mm. 10pcsx 120° led lens. Lens Height: 10.5mm. Beam Angle: 120 Degree. lens: water clear. 10pcsx lens Black Holder. You can follow below process to chontact us. All pictures are for illustration purpose only and Colours may vary slightly.
5 Mode/1Mode Constant Current 2800mA DC 12V XML T6 Led Driver FoN.di - Suitable for 1 XML2 Led in Series. Specification for the driver. You can follow below process to chontact us. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
5 degree Lens Reflector Collimator with Holder Set For 1w 3w 5w L.di - 10pcsx lens Black Holder. Beam Angle: 5 Degree. Lens Height: 10.5mm. Lens Dimaeter: 20mm. Holder Height: 13mm. lens: water clear. 10pcsx 5° led lens. All pictures are for illustration purpose only and Colours may vary slightly.
5 degree Lens Reflector Collimator with Holder Set For 1w 3w 5w .JN - 10pcsx lens Black Holder. Beam Angle: 5 Degree. Lens Height: 10.5mm. Lens Dimaeter: 20mm. Holder Height: 13mm. lens: water clear. 10pcsx 5° led lens. All pictures are for illustration purpose only and Colours may vary slightly.
1PC 3W LED Driver 17mm/20mm DC3.7V 1 Mode 5 Mode LED Flashlight Drive AJ JJ√ - Application: Fit for CREE-XRE-Q5/XPE/XBD /all kind of 3W High Power LED light. CREE XRE/XPE/XBD LED Driver: 1pc. Work for 1pcs XRE/XPE/XBD LED 3W high power led chip. Am 15.04.2023 hat der Verkäufer die folgenden Angaben hinzugefügt.
10PCS 10 Segment Digital Red LED Bar Graph Display Ultra Bright G_.ig - It is up to industrial standard size, low power consumption design. LED color: Red. Ultra brightness indicator light. All pictures are for illustration purpose only and Colours may vary slightly. You can follow below process to chontact us.
Lot of 2 - Ace LEDs AC-50CD1.4AQM LED Driver AC Electronics Ballast - Location: Bin 146 x2 per order. Make sure it is exactly what you are wanting. What you see in the picture is what you get. Nothing else is included! MANUFACTURERS WARRANTY IS NOT APPLIED OR TRANSFERRED.
LCD1602A Module Board IIC I2C Adapter 16x2 LCD Green Display Breadboard Testing - Display Format: 16x2 Character. 1 x Breadboard. 1 x LCD module (with adapter installed). LCD module Pins Definition 6 Pin: E - the LCD module execute command. LCD module Features 5 Pin: R / W for read and write signal line, a high read operation, write operation is low.
16-bit WS2812 5050 RGB LED Built-in Full-color Driver Light Development Board - Built-in electric reset circuit and power lost reset circuit. Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate. Full-color module, Full-color soft lights a lamp strip.
64-bit WS2812 5050 RGB LED Development Board With Built-in Full-color Driver - Effectively ensuring the pixel point light color height consistent. The data transfer protocol use single NZR communication mode. After transmission for each pixel, the signal to reduce 24bit. Pixel adopt auto resha-ping transmit technology, making the pixel cascade number is not limited the signal transmission, only depend on the speed of signal transmission.
3W 700mA DC-DC 7.0-30V to 1.2-28V LED lamp Driver Support PWM Dimmer - Output Current: 700mA. Internal power dissipation: Vin = 24v, 5LEDS maximum 700mW. LED +: access the LED anode. LED-: then the LED cathode. Input filter: capacitor. Output short circuit protection: sustainable.
High Power 10W 900mA Constant Current LED Light Driver Supply DC12-24V - 10w LED driver. 1pcs Constant Current LED Driver. Application:Fit for 1x10w led 3 in series and 3 in parallel. Storage Temperature:-20-80. Function:Open circuit,Short circuit and Over. hope you could understand.
3W 5-35V LED Driver 700mA PWM Dimming DC to DC Step-down Constant Current - Output: 700mA ± 20mA. Supports PWM dimming. Drive 1-10 pcs 3W LED. Constant output current, low ripple. High level turn off the output. LED + LED anode connection, LED-LED cathode connection. Low level Open the output.
100Pcs LED Plastic Holder DualHole Black Square 90 Degree Curved Base 3mm - Model: Approx. 3mm / 0.1in, dual hole, top green, bottom red. Suitable for approx. 3mm / 0.1in LED lights. Very practical, the LED lights will not bend, cut, or short circuit with this holder. Item Type: LED Plastic Holder.
1X(AT89C2051 6 Digital LED Display Electronic Clock DIY Kit Receiver for O6A5)f - 1X(This is a kit encompassing a complete 6 Digit clock. This is a DIY kit and as such will arrive unsoldered. The kit makes for hand soldering with solder pads and an easy to read circuit board.The board has mounting holes to allow it to be attached to any surface you can With some interesting use of fabric we are pretty this would make a good wrist watch.Length:90mmWidth:70mmHeight:3mmWeight:44gSolder Level:Through-holeMinimum Operating Temperature:-40°CMaximum Operating Temperature:85°CMounting Hole Size:M2.5Mounting Dimensions:85/65mmType:7-SegmentShape:ClockChipset MPN:AT89C2051Battery Required:CR2032colour:Main color greenMaterial:ABS+ metalPackage Contents:1 * DIY clock Kit)
24 Keys RGB LED Strip Light Wireless Dimmer Remote Controller Led Light Remote - About this item 【Prefect Replacement Remote】Compatible with all 5050 2835 3528 RGB light strip, no matter what brand it's. Do you still worry about whether having to purchase a new set if your remote was broken, lost or chewed up? Don't worry about it! We can provide you with a cheap two pack of remotes to replace the original one! 【Right Out of the Box】Work right away, work perfectly as the same as the original remote. Simple to use and they should be pointed directly at the devices if you are trying to control. 【Please Note】that pull out the plastic piece before use, or you can check the strip lights whether is working correctly if the controller can't work. If the remote still doesn't work at all, please try more several times or be free to contact with us to change a new.
Jammas High Power LED Chip AC85-300V - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
cable assembly front sign #6324018 - This is a NEW item. Because it’s never been used, you should expect this item to perform as a new item does. If you run into difficulty, let us know. Physical Condition Functional Condition.
luminator cable assembly front sign #17744504128 - This is a NEW item. Because it’s never been used, you should expect this item to perform as a new item does. If you run into difficulty, let us know. Physical Condition Functional Condition.
5 Mode/1Mode Constant Current 2800mA DC 12V XML Led Driver FoNWU Jf - Suitable for 1 XML2 Led in Series. Specification for the driver. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Current: 2.8A. Function: Open circuit, Short circuit and Over loading.
TM1637 0.36" 4-Digit Tube LED Segment Module Red Common Anode Clock Display - The module is a 12 foot with a clock point four common anode tube (0.36 in.). 1 x TM1637. 4 digital display interface module as shown below Display of red for the four digits. Heart is pain if missing a cable when installing a drive, or you need HDD case for M key SSD, but you bought B key.
12V 5mm Flashing LED Diode Light Clear 20cm Cable Pre-Wired With Plastic Holder - Cable Length: 20cm (200mm). Type: Flashing. Flash Frequency: 1.5HZ. Red Wire is (+). Black Wire is (-). Color: Blue, Green, Yellow, Red, Cold White, Multicolor. To avoid any inconvenience and disputes, we don't accept combined order request in principle.
Xitanium - 1750mA Constant Current LED Driver - (Part 6816) Xitanium - 1750mA Constant Current LED Driver. Brand New, No BoxThe Xitanium XI-LED120A0024V18F 40-Watt LED Driver accepts 120VAC, and outputs a constant 1750mA current with a varying DC voltage between 2.8-24VDC. The driver is UL , CE certified and outdoor rated and very compact.Features & details*40 Watt LED Driver*Input Voltage: 120VAC 50-60Hz*Output Voltage: 2.8VDC-24VDC*Output Current: 1750mA*UL Class 2 - Outdoor Rated
RF magic Controller 6803 IC 133 Modes for Dream Color Chasing 5050 RGB LED Strip - 133 programs, 100-level speed, adjustable brightness. With digital tube, left second display mode, right second display speed. (14) Color: Gray+Black. 1 x User Manual. With 2 3PINS cables, the connection is simple and the use is very convenient.
10pcs x 30degrees led Lens for 1W 3W 5W Hight Power LED with holder - Quantity : 10pcs LENs for hight power LED. 10X 30 degree led lens. Lens Degree: 30°. Len Holder Color :black (Also have white). We will not be responsible for any duties and. answer for you 。. Len Material : PMMA.
15W 94X50MM 9450 White COB LED Panel Strip Lights DC12-24V For DIY car lamps - Material: LED COB. Light Color: cool white. Color Temperature:6000-6500k. We will happy to help you to deal with it. Our aim: best price and best quality for you. We stand behind our products. We are always willing to work things out.
5 Mode 26MM Led Driver Board 3V-18V 5A For PhlatLight Luminus SST-50 - Input Current: 3.0A~5A. We will happy to help you to deal with it. 5 Modes: Low (10%), mid (50%), high (100%), strobe (100%), SOS (100%). We stand behind our products. We are always willing to work things out.
4-5x1w LED Power Driver Supply 300mA DC12-18V For 5pcs 1W High Power LED - Output: DC12-18V, 300MA+-5%. Usage: Used for the 4-5pcs 1W LED Light. Part Number: (4-5) 1W. We will happy to help you to deal with it. Pleasure you. We are always willing to work things out. We stand behind our products.
3X3W 700mA MR16 LED driver transformer power supply for MR16 12V lamp - MR16 3X3W led driver. 10pcs MR16 3X3W led driver. Output Current: 700mA. Suit for 3pcs 3W LED or 1pcs 10W led. DC output: 9-11V DC. We will happy to help you to deal with it. Pleasure you. We are always willing to work things out.
Driver Input 85-265V Output DC18-33V 600MA for 6-10X 3W High Power LED Light - Output Current: 600mA. Usage: Used for the 6~10pcs 3W LED Light. 1pcs 6-10x3W Constant Current Driver for 6-10pcs 3W High Power LED. TC: 75 degree (MAX). TA: 50 degree (MAX). Output open protection. Output short-circuit protection.
10W-18W (10-18)X3W IP67 Waterproof LED Driver for 3W LED Light DC30V~60V 650mA - Output Current: 650mA. Usage: Used for the 10~18pcs 3W LED Light. Working temperature: -20-80 Deg. Output open protection. We will happy to help you to deal with it. We stand behind our products. We are always willing to work things out.
Constant Current Driver for 30W /(3-4pcs) 10W High Power LED in series 950mA - Output Current: 950mA. Usage: Used for the 30w or (3~4pcs) 10W LED Light. Aluminium Alloy Material. 1pcs 6-12x3W Constant Current led Driver. TC: 75 degree (MAX). TA: 50 degree (MAX). We will happy to help you to deal with it.
1pcs 3-4x3 W Watt High Power LED Light lamp Driver Power Supply 85-265V 600mA - Output Current :600mA±5%. lights, Mood Lighting, LED module, Craft flashlights, headlights. Usage and Function ranges, like Architectural Lighting, General lighting, Automotive. Widely used for indoor and outdoor lighting and decorations in all.
10pcs 3-4x3 W Watt High Power LED Light lamp Driver Power Supply 85-265V 600mA - Output Current :600mA±5%. lights, Mood Lighting, LED module, Craft flashlights, headlights. Usage and Function ranges, like Architectural Lighting, General lighting, Automotive. Widely used for indoor and outdoor lighting and decorations in all.
Constant Current Driver for 12-18pcs 3W High Power LED AC85-265V 40w 600mA - Output Current: 600mA ±5%. can work for 12-18pcs 3W led chip n series connection. 1pcs 12-18x3W Constant Current Driver for 12-18pcs 3W High Power LED. We will happy to help you to deal with it. We stand behind our products.
Constant Current Driver for 14-18pcs 3W High Power LED AC85-265V - Usage: Used for the 14~18pcs 3W LED Light. Constant Current Driver for 14-18pcs 3W High Power LED AC85-265V to DC36-75V 680mA. 1pcs 14-18x3W Constant Current Driver for 14-18pcs 3W High Power LED. TA: 50 degree (MAX).
10 PCS 15mm 4 Pin two Connector with Cable For SMD LED 5050 RGB Strip Light - Specifications: 10mm 4 pin Connector with Cable For LED Strip SMD 5050 RGB, No Need Soldering. 10 pcs x 15cm 4 pin two Connector with Cable For LED Strip SMD 5050 RGB. With this item you can connect your 5050 LED Stripe as your wish.
3-4x3 W Watt High Power LED Light lamp Driver Power Supply 85-265V 600mA - Output Current :600mA±5%. lights, Mood Lighting, LED module, Craft flashlights, headlights. Usage and Function ranges, like Architectural Lighting, General lighting, Automotive. Widely used for indoor and outdoor lighting and decorations in all.
20W LED Waterproof Driver Supply + 20w full spectrum led grow chip 380-840nm - Full spectrum LED Grow Chip ---20w 380nm~840nm. 20W LED Grow Chip. 20w LED driver. 1pcs 20W led waterproof drive. Color ratio:full spectrum 380nm-840nm. LED grow chip details Application:Fit for 1x20w led 10 in series and 2 in parallel (or 5-10pcs 3W led bead).
Constant Current Driver for 10-18pcs 3W High Power LED AC85-265V 40w 600mA - Output Current: 600mA ±5%. can work for 10-18pcs 3W led chip n series connection. 1pcs 10-18x3W Constant Current Driver for 12-18pcs 3W High Power LED. We will happy to help you to deal with it. We stand behind our products.
10Pcs 2 Pin LED Strip Connectors 3528/5050 10mm Width PCB Ribbon Single Color - 2:For non-waterproof LED strip light, just slide in the ribbon and make sure positive and negative poles match; If you feel there is a loose connection, thicken your strip light by adding an extra chip in between and make sure the built-in soldering point touches your strip light tightly.
1-3x1w LED Power Driver Supply 300mA DC3-14V For 3pcs 1W High Power LED - Output: DC3-14V, 300MA+-5%. Usage: Used for the 1-3pcs 1W LED Light. Part Number: (1-3) 1W. We will happy to help you to deal with it. Pleasure you. We are always willing to work things out. We stand behind our products.
4-7x1w LED Power Driver Supply 300mA DC12-25V For 25pcs 1W High Power LED - Output: DC12-25V, 300MA+-5%. Usage: Used for the 4-7pcs 1W LED Light. Part Number: (4-7) 1W. We will happy to help you to deal with it. Pleasure you. We are always willing to work things out. We stand behind our products.
8-12x1w LED Power Driver Supply 300mA DC24-42V For 12pcs 1W High Power LED - Output: DC24-42V, 300MA+-5%. Usage: Used for the 8-12pcs 1W LED Light. Part Number: (8-12) 1W. We will happy to help you to deal with it. Pleasure you. We are always willing to work things out. We stand behind our products.
8-15x1w LED Power Driver Supply 300mA DC24-55V For 15pcs 1W High Power LED - Output: DC24-55V, 300MA+-5%. Usage: Used for the 8-15pcs 1W LED Light. Part Number: (8-15) 1W. We will happy to help you to deal with it. Pleasure you. We are always willing to work things out. We stand behind our products.
50M/Metters 10mm 3M Double Sided Tape Adhesive for LED Light 5050 Strip light - Tape width: 10mm. Tape type: Double-side 3M Tape. Made of non-woven cloth and coating with acrylic on both sides, half transparant color, very easy to operate, good Durability, temperature withstanding, strong adhesive, waterproof.
18-36x1w LED Driver Power Supply 300mA DC50-120V For 36pcs 1W High Power LED - Part Number: (18-36) 1W. Usage: Used for the 18-36pcs 1W LED Light. Output: DC50-120V, 350MA+-5%. We will happy to help you to deal with it. Pleasure you. We stand behind our products. We are always willing to work things out.
50W Full Spectrum LED COB chip DC12V 32V, Integrated Smart IC Driver 220V 110V - 50W COB LED DC12V,DC32V. Light source: COB. 50W Full Spectrum LED, Integrated Smart IC Driver 220V,110V. Color ratio:full spectrum 380nm-840nm. It is the newest trend for indoor plants. Advanced LED grow lights use less electricity, and create less heat, not only provides intense, effective lighting for indoor gardening system but also make the garden cool.This is a revolutionary step for LED grow lights which have previously been unable to act as the sole light source for the indoor garden.
3V 5V 12V 5MM LED Diode Light Clear 20cm Cable Pre-Wired With Plastic Holder - Light color: Red / Yellow / Blue /green/warm white/ White/fast multicolor/solw multicolor. Lens type: water clear. Light type: constant. Lead length: approx. Wave length: 5000nM - 6500nM. We will happy to help you to deal with it.
1602A LCD Display Module 16x2 Green Light Adapter Breadboard Arduino Project - Display Format: 16x2 Character. 1 x Breadboard. The display is great for projects with Arduino or Raspberry Pi. On the display, 16 characters per line are available, enough space to display information such as temperature, air pressure, etc.
2 x Green 10-Segment LED Bar Array Display - 2 x Green 10-Segment LED Bar Array Display 2 x Green 10-Segment LED Bar Array Display £ 3.59 Ask a question Green 10 segment LED bar array featuring excellent visibility and contrast. The LEDs provide a consistent brightness throughout the display and feature a long life making them suitable for counting and clock applications. Pack size: 2 Green LED White bar on a black face Can be end stacked to form longer lengths Bar size: 5.0 x 1.74mm Low current Dimensions: 25.5 x 10.2 x 7.9mm About Us Shop related items eBay & Ecommerce Stores By.
10 x Yellow 10-Segment LED Bar Array Display - 10 x Yellow 10-Segment LED Bar Array Display 10 x Yellow 10-Segment LED Bar Array Display £ 11.49 Ask a question Yellow 10 segment LED bar array featuring excellent visibility and contrast. The LEDs provide a consistent brightness throughout the display and feature a long life making them suitable for counting and clock applications. Pack size: 10 Yellow LED White bar on a black face Can be end stacked to form longer lengths Bar size: 5.0 x 1.74mm Low current Dimensions: 25.5 x 10.2 x 7.9mm About Us Shop related items eBay & Ecommerce Stores By.
2 x Green / Red 10-Segment LED Bar Array Display - 2 x Green / Red 10-Segment LED Bar Array Display 2 x Green / Red 10-Segment LED Bar Array Display £ 3.99 Ask a question Green and red 10 segment LED bar array featuring excellent visibility and contrast. The LEDs provide a consistent brightness throughout the display and feature a long life making them suitable for indication and overflow applications. Pack size: 2 First 7 bars are green, last 3 are red White bar on a black face Can be end stacked to form longer lengths Bar size: 5.0 x 1.74mm Low current Dimensions: 25.5 x 10.2 x 7.9mm About Us Shop related items eBay & Ecommerce Stores By.
10 x Green / Red 10-Segment LED Bar Array Display - 10 x Green / Red 10-Segment LED Bar Array Display 10 x Green / Red 10-Segment LED Bar Array Display £ 10.49 Ask a question Green and red 10 segment LED bar array featuring excellent visibility and contrast. The LEDs provide a consistent brightness throughout the display and feature a long life making them suitable for indication and overflow applications. Pack size: 10 First 7 bars are green, last 3 are red White bar on a black face Can be end stacked to form longer lengths Bar size: 5.0 x 1.74mm Low current Dimensions: 25.5 x 10.2 x 7.9mm About Us Shop related items eBay & Ecommerce Stores By.
5 x Green 10-Segment LED Bar Array Display - 5 x Green 10-Segment LED Bar Array Display 5 x Green 10-Segment LED Bar Array Display £ 6.49 Ask a question Green 10 segment LED bar array featuring excellent visibility and contrast. The LEDs provide a consistent brightness throughout the display and feature a long life making them suitable for counting and clock applications. Pack size: 5 Green LED White bar on a black face Can be end stacked to form longer lengths Bar size: 5.0 x 1.74mm Low current Dimensions: 25.5 x 10.2 x 7.9mm About Us Shop related items eBay & Ecommerce Stores By.
5 x Green / Red 10-Segment LED Bar Array Display - 5 x Green / Red 10-Segment LED Bar Array Display 5 x Green / Red 10-Segment LED Bar Array Display £ 6.49 Ask a question Green and red 10 segment LED bar array featuring excellent visibility and contrast. The LEDs provide a consistent brightness throughout the display and feature a long life making them suitable for indication and overflow applications. Pack size: 5 First 7 bars are green, last 3 are red White bar on a black face Can be end stacked to form longer lengths Bar size: 5.0 x 1.74mm Low current Dimensions: 25.5 x 10.2 x 7.9mm About Us Shop related items eBay & Ecommerce Stores By.
2 x Yellow 10-Segment LED Bar Array Display - 2 x Yellow 10-Segment LED Bar Array Display 2 x Yellow 10-Segment LED Bar Array Display £ 4.49 Ask a question Yellow 10 segment LED bar array featuring excellent visibility and contrast. The LEDs provide a consistent brightness throughout the display and feature a long life making them suitable for counting and clock applications. Pack size: 2 Yellow LED White bar on a black face Can be end stacked to form longer lengths Bar size: 5.0 x 1.74mm Low current Dimensions: 25.5 x 10.2 x 7.9mm About Us Shop related items eBay & Ecommerce Stores By.
60degree High Power LED lens 23mm convex lens pmma led lens holder DIY - Materials: PMMA. 10pcs 50pcs 100pcs Sets/lot 23mm Bead Surface High quality Led Lens 60 Degree black Holder +Lens For 1w 3w 5w High power led. Led lens set. Temperature:-30 to +95 degree. Degree: 60. With holder: 24.5mm.
DC 0-30V Blue LED Reading Display 0.56" Digital Battery Volt Meter Panel 3 Wire - Wire connection: Red and Yellow to battery +, Black to battery -. Display mode: 0.56" LED digital, 3 digit. Display color: Blue. Heart is pain if missing a cable when installing a drive, or you need HDD case for M key SSD, but you bought B key.
Future Kit 22 LED Sand Timer DIY kit FK154 Sandglass Soldering Flux Workshop - This is a kit that once complete provides a small sandglass style timer, of course without the sand but 22 LED. This is a DIY kit and as such will arrive unsoldered. The kit makes ideal practice for hand soldering with clear solder pads and an easy to read circuit board. Be aware, if an item is "unwanted", return postage will be paid by the consumer. Furthermore, if a returned "faulty" item is found to not be faulty, postage costs will not be refunded. We are unable to refund the cost of a courier and will only be able to refund return postage on receiving a copy of the postage receipt. Flux Workshop began trading late 2014, drawing from years of experience and interest in electronics and building CNC machines. With the aim to supply good quality components at reasonable prices that allow.
Keyestudio Smart Clock Kit KS0201 DIY Temp Red Acrylic Arduino Flux Workshop - This set provides everything needed for the construction of a smart electronic clock. The modules all feature standard 2.54mm connectors and cables which allows for solder free construction of the kit. No soldering required. The kit includes all structural elements and an illustrated guide for construction as well as a pair of weights for testing after the build. The board is programmed via the Arduino development software downloadable for FREE from their website. The kit comes with a number of example codes to help introduce you to the system. The board is based on the Open Source Arduino project and follows the same exact specification. This may require a driver to be installed, however this is a standard driver that is distributed by Microsoft Windows Update, is not required on Linux an.
Keyestudio 4x4x4 RGB LED Cube Kit (Arduino-Compatible) DIY 64 Flux Workshop - This set provides everything needed for the construction of a RGB LED cube display. This is a DIY kit and as such will arrive unsoldered. The kit makes ideal practice for hand soldering while resulting in a bright and bold display. The kit includes all structural elements and an illustrated guide for construction as well as some example code once complete. The example program is only the beginning, from there you can move into more complex displays, such as notifications of emails or telling the time. Based on the ATmega328P chipset the microcontroller is the entry level Arduino-compatible board (colorduino). Featuring a socket for a AC-DC adapter that can power the board and supply more current then available from the USB connection. The adapter should be 9 - 12V DC, 250mA or more, have a.
Future Kit 3 LED Chasing Display DIY kit FK110 On Off Soldering Flux Workshop - This is a kit that once complete provides a small 3 LED chase display. Each LED lights then the next and so on. The speed of which can be changed by altering the C and R values (one option provided). This is a DIY kit and as such will arrive unsoldered. The kit makes ideal practice for hand soldering with clear solder pads and an easy to read circuit board. Be aware, if an item is "unwanted", return postage will be paid by the consumer. Furthermore, if a returned "faulty" item is found to not be faulty, postage costs will not be refunded. We are unable to refund the cost of a courier and will only be able to refund return postage on receiving a copy of the postage receipt. Flux Workshop began trading late 2014, drawing from years of experience and interest in electronics and building CNC m.
Future Kit 10 Bi-Colour LED Line DIY kit Red Soldering Practice Flux Workshop - Audio, Communication (1-Wire, Accessories, ASK, Bluetooth, CAN, Ethernet, GSM & GPRS, Light, Radio, RFID & NFC, RS232, RS485, TTL, Wi-Fi), Data Storage, Displays (Driver, LCD, OLED, TFT), Lasers, LEDs, Motors (Controller, DC, Drivers), Power (Adapters, Charger, Driver, Generators, Load, Rectifiers & Transformers, Regulators, Reverse, Transmitter), Relays (Accessories, Mechanical, Solid State), Sensors (Acceleration, Accessories, Compass, Curre.
Thinary Electronic RGB LED Ring 8Bit WS2812 5050 RGB mini led lamp module - Chip: WS2812 (built-in LED). 1 x Ring Wall Clock 8 Super Bright WS2812 5050 RGB LED Lamp Panel. LED:8pcs 5050 RGB full color highlighting. Full-color module, Full color soft lights a lamp strip. LED decorative lighting, Indoor/outdoor LED video irregular screen.
AT89C2051 6 Digit LED Clock DIY Kit 7-Segment Receiver Arduino Flux Workshop - Be aware, if an item is "unwanted", return postage will be paid by the consumer. Furthermore, if a returned "faulty" item is found to not be faulty, postage costs will not be refunded. We are unable to refund the cost of a courier and will only be able to refund return postage on receiving a copy of the postage receipt. Flux Workshop began trading late 2014, drawing from years of experience and interest in electronics and building CNC machines. With the aim to supply good quality components at reasonable prices that allow you, the customer, to have the confidence to embark on your project. We are here to help you in any way we can. If you need to make sure a product is right for your needs or how to get the most from a product, please do not hesitate to contact us through the eBay messagin.
Future Kit Night Light DIY kit LED 12V LDR light Trigger Soldering Flux Workshop - This is a kit that once complete provides a small light, that mimics a firefly. The circuit features an LDR light sensor that triggers the LEDs when it is dark. This is a DIY kit and as such will arrive unsoldered. The kit makes ideal practice for hand soldering with clear solder pads and an easy to read circuit board. Be aware, if an item is "unwanted", return postage will be paid by the consumer. Furthermore, if a returned "faulty" item is found to not be faulty, postage costs will not be refunded. We are unable to refund the cost of a courier and will only be able to refund return postage on receiving a copy of the postage receipt. Flux Workshop began trading late 2014, drawing from years of experience and interest in electronics and building CNC machines. With the aim to supply good qu.
Flashing LED Heart DIY Kit Capacitor Unsoldered 3xAA 4.5V USB Flux Workshop - Be aware, if an item is "unwanted", return postage will be paid by the consumer. Furthermore, if a returned "faulty" item is found to not be faulty, postage costs will not be refunded. We are unable to refund the cost of a courier and will only be able to refund return postage on receiving a copy of the postage receipt. Flux Workshop began trading late 2014, drawing from years of experience and interest in electronics and building CNC machines. With the aim to supply good quality components at reasonable prices that allow you, the customer, to have the confidence to embark on your project. We are here to help you in any way we can. If you need to make sure a product is right for your needs or how to get the most from a product, please do not hesitate to contact us through the eBay messagin.
Future Kit Firefly Light DIY kit FK167 LDR light Trigger Soldering Flux Workshop - This is a kit that once complete provides a small pulsing green LED, that mimics a firefly. The circuit features an LDR light sensor that triggers the LED when it is dark. This is a DIY kit and as such will arrive unsoldered. The kit makes ideal practice for hand soldering with clear solder pads and an easy to read circuit board. Be aware, if an item is "unwanted", return postage will be paid by the consumer. Furthermore, if a returned "faulty" item is found to not be faulty, postage costs will not be refunded. We are unable to refund the cost of a courier and will only be able to refund return postage on receiving a copy of the postage receipt. Flux Workshop began trading late 2014, drawing from years of experience and interest in electronics and building CNC machines. With the aim to sup.
MAX7219 LED Serial Dot Matrix Unsoldered DIY Kit 8x8 Red Display Flux Workshop - This kit, once complete provides a module is ideally suited to adding a display to your project and is compatible with prototyping boards such as the MB-102 which feature standard sockets with a pin pitch of 2.54mm. This module lets you display your information in a bold and bright way, taking your project to new levels. Be aware, if an item is "unwanted", return postage will be paid by the consumer. Furthermore, if a returned "faulty" item is found to not be faulty, postage costs will not be refunded. We are unable to refund the cost of a courier and will only be able to refund return postage on receiving a copy of the postage receipt. Flux Workshop began trading late 2014, drawing from years of experience and interest in electronics and building CNC machines. With the aim to supply good.
Future Kit 2 Lamp Alternating Display DIY kit FK171 Soldering Flux Workshop - This is a kit that once complete provides a small 2 lamp alternating display. The speed of which can be changed with the onboard potentiometer. This is a DIY kit and as such will arrive unsoldered. The kit makes ideal practice for hand soldering with clear solder pads and an easy to read circuit board. Be aware, if an item is "unwanted", return postage will be paid by the consumer. Furthermore, if a returned "faulty" item is found to not be faulty, postage costs will not be refunded. We are unable to refund the cost of a courier and will only be able to refund return postage on receiving a copy of the postage receipt. Flux Workshop began trading late 2014, drawing from years of experience and interest in electronics and building CNC machines. With the aim to supply good quality components.
Future Kit 6 White LED Light DIY kit FK185 Torch Switch Soldering Flux Workshop - This is a kit that once complete provides a small 6 LED white AA battery operated light or torch. This is a DIY kit and as such will arrive unsoldered. The kit makes ideal practice for hand soldering with clear solder pads and an easy to read circuit board. Be aware, if an item is "unwanted", return postage will be paid by the consumer. Furthermore, if a returned "faulty" item is found to not be faulty, postage costs will not be refunded. We are unable to refund the cost of a courier and will only be able to refund return postage on receiving a copy of the postage receipt. Flux Workshop began trading late 2014, drawing from years of experience and interest in electronics and building CNC machines. With the aim to supply good quality components at reasonable prices that allow you, the custo.
T1000S Magical RGB LED Strip SD Card Pixel Controller - (1 x SD card. 6) SD card Capacity is 128MB. Material: Steel. MAX number of pixels: 2048. 1) 100% new with good quality. 2) Color may vary slightly due to the color setting of each individual monitor.
T1000S SD Card LED Controller Pixel DC3.3~24V 2048 Strip Light - (MAX number of pixels: 2048. 1 x SD card. 6) SD card Capacity is 128MB. 2) Color may vary slightly due to the color setting of each individual monitor. Material: Steel. Color: Grey. 2) Support the rules and special-shaped handle.
T1000S Magical RGB LED Strip SD Card Pixel Controller Bring 1024/2048 Light - (MAX number of pixels: 2048. 1 x SD card. 6) SD card Capacity is 128MB. 2) Color may vary slightly due to the color setting of each individual monitor. Material: Steel. Color: Grey. 2) Support the rules and special-shaped handle.
WS2812 LED 5050 RGB 8x8 LED Matrix Driver Board For Arduino - 1piece x 8x8 64 LED Matrix WS2812 LED 5050 RGB Full-Color Driver Board For Arduino. Built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate.
WS2812 5050 RGB 8 Bit LED Strip Module 5PCS - USA SHIPS TODAY! - This is a 8 LED strip module. These three colors allow for the full color gamut depending on the intensity of the individual LED diodes. They are used when you need slight illumination for your project area and especially RGB color changing lights.
WS2812 5050 RGB 8 Bit LED Strip Module USA SHIPS TODAY! - This is a 8 LED strip module. These three colors allow for the full color gamut depending on the intensity of the individual LED diodes. They are used when you need slight illumination for your project area and especially RGB color changing lights.
Thinary Electronic RGB LED Ring 8Bit WS2812 5050 RGB mini led lamp module - Chip: WS2812 (built-in LED). 1 x Ring Wall Clock 8 Super Bright WS2812 5050 RGB LED Lamp Panel. LED:8pcs 5050 RGB full color highlighting. Full-color module, Full color soft lights a lamp strip. LED decorative lighting, Indoor/outdoor LED video irregular screen.
Thinary Electronic RGB LED Ring 8Bit WS2812 5050 RGB mini led lamp module - Chip: WS2812 (built-in LED). 1 x Ring Wall Clock 8 Super Bright WS2812 5050 RGB LED Lamp Panel. LED:8pcs 5050 RGB full color highlighting. Full-color module, Full color soft lights a lamp strip. LED decorative lighting, Indoor/outdoor LED video irregular screen.
5-35V 3W LED Driver 700mA PWM Dimming DC DC Step-down Constant Current M - Output: 700mA ± 20mA. Supports PWM dimming. Drive 1-10 pcs 3W LED. Constant output current, low ripple. High level turn off the output. LED + LED anode connection, LED-LED cathode connection. Low level Open the output.
Thinary Electronic RGB LED Ring 8Bit WS2812 5050 RGB mini led lamp module - Chip: WS2812 (built-in LED). 1 x Ring Wall Clock 8 Super Bright WS2812 5050 RGB LED Lamp Panel. LED:8pcs 5050 RGB full color highlighting. Full-color module, Full color soft lights a lamp strip. LED decorative lighting, Indoor/outdoor LED video irregular screen.
Red 10-Segment LED Bar Array Anode - Red 10-Segment LED Bar Array Anode Red 10-Segment LED Bar Array Anode £ 2.59 Ask a question LED bar array with excellent visibility and contrast. The LEDs provide a consistent brightness throughout the display and are suitable for PCB mounting Red LED White bar on a black face Common anode Can be end stacked to form longer lengths Bar size: 5.0 x 1.74mm Low current Dimensions: 25.5 x 10.1 x 7.9mm About Us Shop related items eBay & Ecommerce Stores By.
1Pcs Ic Max7219Cwg Max7219 Sop24 Driver Led Display - NEW, ORIGINAL parts. Transistors, and so on. Especially in Hard To Find Parts. We specialize in electronic components. ICs, Capacitors, Diodes, Resistors, LEDs. West Asia/Middle East. Australia/New Zealand.
General Electric GE Power White Tetra LED Strip Signage Sign Light System 100pcs - You are bidding on a new-old-stock spool of 100 modules of GE Power White Tetra LED Strip lighting. The roll of wire measures roughly 35 feet long and has the LEDs spaces 4 inches apart throughout. The spool exhibits some wear from means of storage. Please carefully review the pictures for further condition information on this roll of GE LEDs. Check out my other listings. I will gladly combine shipping.
LED Strip Controller RGBW+WW with Time Programming USB Cord 12-24V 5x4A TC420 - Programmable LED time controller. Input/output 12-24Vdc 4A each channel (Red Green Blue + 2 additional channels. Easy to program with PC. Perfect for aquarium lighting systems. In a box with USB cable and CD with OS for programing schedules (Win) If you need higher quantity than available in the listing, please contact us. Our listings sometimes does not indicate our full stock.
5mm 9V-12V 2Pin Round Pre-wired water Clear led with Plastic Holder 10-100PCS - 10-100PCS 5mm DC12V white Red Green Blue Round Pre-wired water Clear led with Plastic Holder. Viewing angle: 25 degree. Lead length: approx. Lens type: water clear. Light color: Red / Yellow / Blue /green/warm white/ White/fast multicolor/solw multicolor.
LED Bargraph Level Indicator, TriColor RED/GREEN/ORANGE, 10 Seg, 30 Pin (50pcs) - LED Bargraph Level Indicator, TriColor RED/GREEN/ORANGE, 10 Seg, 30 Pin (50pcs). Ledtronics LED Bargraph Level Indicator, Tri-Color RED/GREEN/ORANGE, 10 Segment, 30 Pin DIP, Black/White Face (50pcs), NOS. Features include end stackable, wide viewing angle and low current operation.*Full Datasheets provided
Thinary Electronic RGB LED Ring 8Bit WS2812 5050 RGB mini led lamp module - Chip: WS2812 (built-in LED). 1 x Ring Wall Clock 8 Super Bright WS2812 5050 RGB LED Lamp Panel. LED:8pcs 5050 RGB full color highlighting. Full-color module, Full color soft lights a lamp strip. LED decorative lighting, Indoor/outdoor LED video irregular screen.
Bar Graph Array 10 Segment Green and Red Source for Level Indicators Kingbright - The Green source color devices are made with GalliumPhosphide Green Light Emitting Diode.The Bright Red source color devices are made with GalliumPhosphide Red Light Emitting Diode. Features Suitable for level indicators. Low current operation. Excellent on/off contrast. End stackable. Mechanically rugged. Standard : gray face, white segment. RoHS compliant. If you need higher quantity than available in the listing, please contact us. Our listings sometimes does not indicate our full stock.
Thinary Electronic RGB LED Ring 8Bit WS2812 5050 RGB mini led lamp module - Chip: WS2812 (built-in LED). 1 x Ring Wall Clock 8 Super Bright WS2812 5050 RGB LED Lamp Panel. LED:8pcs 5050 RGB full color highlighting. Full-color module, Full color soft lights a lamp strip. LED decorative lighting, Indoor/outdoor LED video irregular screen.
Thinary Electronic RGB LED Ring 8Bit WS2812 5050 RGB mini led lamp module - Chip: WS2812 (built-in LED). 1 x Ring Wall Clock 8 Super Bright WS2812 5050 RGB LED Lamp Panel. LED:8pcs 5050 RGB full color highlighting. Full-color module, Full color soft lights a lamp strip. LED decorative lighting, Indoor/outdoor LED video irregular screen.
Thinary Electronic RGB LED Ring 8Bit WS2812 5050 RGB mini led lamp module - Chip: WS2812 (built-in LED). 1 x Ring Wall Clock 8 Super Bright WS2812 5050 RGB LED Lamp Panel. LED:8pcs 5050 RGB full color highlighting. Full-color module, Full color soft lights a lamp strip. LED decorative lighting, Indoor/outdoor LED video irregular screen.
ORIGINAL! AC Adapter For LETARON AED60-24VLS LED Driver - ORIGINAL! AC Adapter For LETARON AED60-24VLS LED Driver. Condition is "Used". Shipped with USPS Priority Mail. If you need more then one I can do a flat rate box and fit several units and shipping won’t be that bad. Just ask me
16 Pixel WS2812 5050 RGB LED Ring Strip Works with NeoPixel Library - 1 x 16 RGB pixel ring. Ultra bright smart LED Rings. LED’s are arranged in a circle. The rings are 'chain-able', you can connect the output from one ring to the input of the other ring and so on. Power : 5V.
Sylvania LED Driver Constant Current - Osram 57420 - Programmed 1600mA 10% - 57420 / OTi 85/120-277/2A3 DIM-1 L. The OPTOTRONIC programmable dimmable family consists of highly efficient linear constant current LED power supplies. The power supplies are available with built-in 0-10V dimming protocol with models available in 1% to 10%.
Recom 19.6W Constant Current Step Down LED Driver RCD-48-0.35/W - This is a Recom 19.6W Constant Current Step Down LED Driver. Its part number is RCD-48-0.35/W. Limitation Of Liability. If you are unhappy with one of our products, you can send it back as long as you follow these basic rules.
1.5V - 12V Wide input, small LED Driver for hobbyists - Efficient, 1.5 -12 Volts Wide Input LED driver. 1.5V - 12V @150 mA Max, DC. This LED driver allows easy lighting on artwork, scale models and more! The small size footprint converter can be built directly into your work.
[3DMakerWorld] Adafruit Bi-Color (Red/Green) 24-Bar Bargraph w/I2C Backpack Kit - What's better than a single LED?. Lots of LEDs! A fun way to make a small linear display is to use two 12-bar Bi-color bar-graphs. It uses constant-current drivers for ultra-bright, consistent color, 1/16 step display dimming, all via a simple I2C interface.
16-bit WS2812 5050 RGB LED Built-in Full-color Driver Light Development Board - Built-in electric reset circuit and power lost reset circuit. Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate. Full-color module, Full-color soft lights a lamp strip.
64-bit WS2812 5050 RGB LED Development Board With Built-in Full-color Driver - 1PCS 8x8 64 LED Matrix WS2812 LED 5050 RGB Full-Color Driver Board Arduino. shaping and then output to ensure line waveform distortion will not accumulate. built-in signal shaping circuit, any one pixel after receiving the signal through the waveform.
64-bit WS2812 5050 RGB LED Development Board With Built-in Full-color Driver - Effectively ensuring the pixel point light color height consistent. The data transfer protocol use single NZR communication mode. After transmission for each pixel, the signal to reduce 24bit. Pixel adopt auto resha-ping transmit technology, making the pixel cascade number is not limited the signal transmission, only depend on the speed of signal transmission.
TPS61042DRBR - TI - 36 pcs - Constant Current LED Driver 8-Pin VSON EP. - Constant Current LED Driver 8-Pin VSON EP. New and original parts, 14 pcs on cut tape and 22 pcs loose in a bag,see attached pictures, what you see is what you'll get. We didn't count the parts, we trusted the information written on the labels by the OEM who sold us the parts, so these are sold AS-IS, no complains about a quantity difference will be accepted.
5M 1200Leds Led Strip Light 2835 SMD DC12V 240Leds/M Fiexble Light IP20 - 1x5M Cool white LED Strip 240 leds/M Non-Waterproof DC12V. Size: L500cm (5M) x W0.8cm x T0.30cm. LED Type: 3528 SMD LED. Super bright 3528 SMD LED. Flexible ribbon for curving around bends. LED Qty: 1200leds/5M(240leds/M).
WS2812B full-Color Driver 25-Bit 5X5 5050 RGB LED Colour Light Development Board - Built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. The serial cascade interface can complete the data receiving and decoding through a signal line.
5mm 8*8 RGB Dot Matrix LED Display Shield+Matrix Driver shield for Arduino DIY - Arduino Module. If you have an Arduino UNO, but just want to drive a RGB LED Matrix, you can consider this Colors shield, it's compatible with Colorduino v2.0. The driver circuit based on 3 MBI5168 constant current sink drivers and a M54564 darlington source driver, the Colorduino pairs the M54564 with a single DM163 constant current driver.
10-100PCS 5mm 3-5V LED 2PIN Round Pre-wired water Clear led with Plastic Holder - 10-100PCS 5mm 3-5V white Red Green Blue Round Pre-wired water Clear led with Plastic Holder. Viewing angle: 25 degree. Lead length: approx. Lens type: water clear. Light color: Red / Yellow / Blue /green/warm white/ White/fast multicolor/solw multicolor.
LED Driver Dimmable, Switchable 30 45 Or 60 Watts high efficiency Ships From US - New LED Driver Dimmable, Switchable 30 45 Or 60 Watts high efficiency Ships From US . 30 45 or 60 Watt LED DRIVER : 30 45 or 60 Watts Input: 120-277 Volts Constant Current settings:700mA, 1050mA, 1400mA 26-43 Volts High efficiency 4.3"x1.82"x1.19x4.05
2X RGB LED Ring 12Bit WS2812 5050 RGB LED Integrated+ Driver Module For Arduino - ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. ● serial cascade interface, through a signal line to complete the receiving and decoding of data.
EPtronics LD60W-48 LED Optimized Driver - New surplus unit without box from a lighting manufacturer that shut down. Driver may show shelf wear from storage.
RGB Full-color 8x8 LED with Colorful Magic Matrix Driver Shield Board DIY Kits - The driver circuit based on 3 MBI5168 constant current sink drivers and a M54564 darlington source driver, the Colorduino pairs the M54564 with a single DM163 constant current driver. Each channel provide a maximum current of 60 mA.
3W 5-35V LED Driver 700mA PWM Dimming DC to DC Step-down Constant Current - Output: 700mA ± 20mA. Supports PWM dimming. Drive 1-10 pcs 3W LED. Constant output current, low ripple. High level turn off the output. LED + LED anode connection, LED-LED cathode connection. Low level Open the output.
100pcs Led Tv Backlight Strip 3v 6v 3030 Lamp Beads Cold White - The price is for 100pcs SMD leds only. Product model: 3030. Product range: TV backlight module lights advertising lights, etc. Color temperature of the product: 12000-15000K (cold white light). SMD LED -3030 WHITE.
Constant Current Driver for 14-18pcs 3W High Power LED AC85-265V - Can work for 14-18pcs 3W led chip n series connection. 14-18X3W 600mA led driver. 1pcs X 14-18x3W led driver. Output Current: 600mA ±5%. Cheaper Best Quality Trust Perfect. We stand behind our products.
RGB LED Ring 12 Bit WS2812 5050 RGB LED + Integrated Driver Module For Arduino - ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. ● serial cascade interface, through a signal line to complete the receiving and decoding of data.
3V 5V 12V 5MM LED Diode Light Clear 20cm Cable Pre-Wired With BL Plastic Holder - Light color: Red / Yellow / Blue /green/warm white/ White/fast multicolor/solw multicolor. Lens type: water clear. Light type: constant. Lead length: approx. Wave length: 5000nM - 6500nM. To avoid any inconvenience and disputes, we don't accept combined order request in principle.
50pcs 45 degree Lens Reflector Collimator with Holder Set For 1w 3w 5w LED - Lens Material: PMMA Lens Angle: 45 Degree Lens Diameter: 20mm Holder Diameter: 21.3mm Lens Height: 10.8mm Holder Height: 13mm Transmittance rate: 93% Please check our store for other sizes. If you cannot find what you need in the store, please do not hesitate to contact us at anytime.
50pcs 120 degree Lens Reflector Collimator with Holder Set For 1w 3w 5w LED - Lens Material: PMMA Lens Angle: 120 Degree Lens Diameter: 20mm Holder Diameter: 21.3mm Lens Height: 10.8mm Holder Height: 13mm Transmittance rate : 93% Please check our store for other sizes. If you cannot find what you need in the store, please do not hesitate to contact us at anytime.
5PCS 8-Bit 5050 WS2812 RGB LED Driver Board 5V Lamp Panel Module For Arduino AVR - A small chainable board with eight 5050 WS2812 RGB LEDs. With a 8MHz or faster processor such as an AVR, Arduino, PIC, mbed, etc. Arduino Module. There are solder pads on the back for connecting wires or breadboard pins and two mounting holes for securing this board to many different surfaces.
8-Bit 5050 WS2812 RGB LED Driver Board 5V Lamp Panel Module For Arduino AVR PIC - A small chainable board with eight 5050 WS2812 RGB LEDs. With a 8MHz or faster processor such as an AVR, Arduino, PIC, mbed, etc. There are solder pads on the back for connecting wires or breadboard pins and two mounting holes for securing this board to many different surfaces.
50pcs For 1w 3w 5w LED 15 degree Lens Reflector Collimator with Holder Set - Lens Material: PMMA Lens Angle: 15 Degree Lens Diameter: 20mm Holder Diameter: 21.3mm Lens Height: 10.8mm Holder Height: 13mm Transmittance rate : 93% Please check our store for other sizes. If you cannot find what you need in the store, please do not hesitate to contact us at anytime.
12-Bit RGB LED Ring WS2812 5050 RGB LED Integrated Driver Module For Arduino - 1 x WS2812 5050 RGB LED 12-Bit Ring Integrated Driver Module For Arduino. ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate.
T1000S Controller RGB LED Strip Pixel Controller + SD Card + Screw Driver - (1 x SD card. 1 x Screw driver. 6) SD card Capacity is 128MB. Material: Steel. MAX number of pixels: 2048. 1) 100% new with good quality. 2) Color may vary slightly due to the color setting of each individual monitor.
1.2V - 3V Miniature LED Driver for hobbyists - 1.2 - 3V DC. Efficient, Small Size, 1.5V LED driver. Designed for 1.5 - 3 Volt operation and will run for over 100 continuous hours using a single D cell or 30 hours from a single AA. Converter may use a single AA, AAA, C, D cell, Solar Cells!
DC12v 5M 5050 Cool white LED 300LED Strip light Flexible Light Black PCB IP65 - (● WaterProof:Yes(IP65). 5M 5050 Cool white LED Strip light. 5050 led Strip Lights ● Color:Cool white 6500-7500k. ● LED type:5050. Canada Rate(item arrived) 0.00% 47.1% 31.4% 17.6% 3.8% 0.1%. Germany Rate(item arrived) 11.1% 22.2% 30.3% 20.9% 13.5% 2%.
1M 60-LED 5050 SMD Waterproof White Flexible Light Strip Power Saving Color REGU - 1M 60-LED 5050 SMD Waterproof White Flexible Light Strip Power Saving Color RGB Displays various colors when used with optional compatible RGB controller Type: LED Strip Light Feature: Waterproof LED Quantity: 60 SMD 5050 Ultra Bright LEDs per meter Light Color: LED RGB Chip Type: SMD 5050 Wattage: 14.4W Voltage: 12V DC Net Weight: 50g Include 3m tape Use: indoor and out door Length: 5 meter Viewing Angle: 120 degree Input Voltage: DC 12V Working Temperature: -20C° to 50C° IP Rating: IP-65 Waterproof With self-adhesive backing (3M tape).
5M 60-LED 5050 SMD Waterproof White Flexible Light Strip Power Saving color 3000 - 5M 60-LED 5050 SMD Waterproof White Flexible Light Strip Power Saving color 3000k Type: LED Strip Light Feature: Waterproof LED Quantity: 60 SMD 5050 Ultra Bright LEDs per meter Light Color: white 3000k Chip Type: SMD 5050 Wattage: 14.4W Voltage: 12V DC Net Weight: 50g Include 3m tape Use: indoor and out door Length: 5 meter Viewing Angle: 120 degree Input Voltage: DC 12V Working Temperature: -20C° to 50C° IP Rating: IP-65 Waterproof With self-adhesive backing (3M tape) RoHS: Yes Brand SATKIT MPN Does not apply EAN 8435325331591.
LED Module 10 Segment Strip Digital Tube Light Emitting Module For Arduino - There are 10 LED bars in the LED bar graph: two red, three yellow, four green, and one blue. Demo code is available to get you up and running quickly. It lights up the LEDs sequentially from red to green, so the entire bar graph is lit up in the end.
10 LED Strip Reels 50 Meters (!) 60 Bright White 6K 12Vdc Adhesive Back 5 Meters - That's enough accent lighting for the largest projects. LEDs are 3528's. LEDs project a cool, 6000 temperature white light. A soldering iron is needed. P/N: 5M-FW-3528-60RW. 3M adhesive backing is built-in; adhesive has a very aggressive tack--wherever you position the strip, that's where it's staying!
2.8A Single Mode 3.7V-12V FOR 10W 6500K LED Flashlight Driver Board Torch - Used for LED: Like 10W XML-T6/U2,10W XM-L2-U2-U3, 10W-XP-L,14W XHP50.2 series etc. Application: Great for flashlight DIY. Application : Great for flashlight DIY. Drive the red black line above LED lamp bead, connect battery input, on the back of battery is indirectly, connect the battery negative side.
RGB LED Ring 12 Bit WS2812 5050 RGB LED + Integrated Driver Module For Arduino - ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. ● serial cascade interface, through a signal line to complete the receiving and decoding of data.
RGB LED Ring 12 Bit WS2812 5050 RGB LED + Integrated Driver Module For Arduino F - ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. ● serial cascade interface, through a signal line to complete the receiving and decoding of data.
ROBERTSON 3P30057 LCVC18AUNI LED Driver - ROBERTSON 3P30057 LCVC18AUNI LED Driver, 10-18 Watt 100- 240Vac, 50-60Hz, 350mA Constant Current 30-54 Vdc Output. Transient Surge Protection and Fault Tolerant Circuits for Safety & Reliability.
NEW 12V RF Wireless Remote Switch Controller Dimmer for Mini LED Strip Light - The red cable should be connected to positive and black cable to negative. LED Output The red cable should be connected to LED positive and black cable to negative. The RF wireless remote signal can pass through barrier, so it's not necessary to aim at the main unit when operate.
LED Module RYG 10 Segment Strip Digital Tube Light Emitting Module - There are 10 LED bars in the LED bar graph: two red, three yellow, five green. Demo code is available to get you up and running quickly. so the entire bar graph is lit up in the end. Want to go further?.
12V RF Wireless Remote Switch Controller Dimmer for Mini LED Strip Light - The red cable should be connected to positive and black cable to negative. LED Output The red cable should be connected to LED positive and black cable to negative. The RF wireless remote signal can pass through barrier, so it's not necessary to aim at the main unit when operate.
1PCS 12V RF Wireless Remote Switch Controller Dimmer for Mini LED Strip Light - The red cable should be connected to positive and black cable to negative. LED Output The red cable should be connected to LED positive and black cable to negative. The RF wireless remote signal can pass through barrier, so it's not necessary to aim at the main unit when operate.
Wireless RGB LED Light Controller Ir Remote 12v Dimmer 24 Button for LED Strip - Great for adjust the brightness of the static color and change the speed of the color changing. It also could adjust the brightness of the static color and change the speed of the color changing. Function:16 Static Color,4 color changing mode.
3W 5-35V LED Driver 700mA PWM Dimming DC to DC Step-down Constant Current - Output: 700mA ± 20mA. Supports PWM dimming. Drive 1-10 pcs 3W LED. Constant output current, low ripple. High level turn off the output. LED + LED anode connection, LED-LED cathode connection. Low level Open the output.
NEW 12V RF Wireless Remote Switch Controller Dimmer for Mini LED Strip Light - The red cable should be connected to positive and black cable to negative. LED Output The red cable should be connected to LED positive and black cable to negative. The RF wireless remote signal can pass through barrier, so it's not necessary to aim at the main unit when operate.
12V RF Wireless Remote Switch Controller Dimmer for Mini LED Strip Light - The red cable should be connected to positive and black cable to negative. LED Output The red cable should be connected to LED positive and black cable to negative. The RF wireless remote signal can pass through barrier, so it's not necessary to aim at the main unit when operate.
RGB LED Ring 12 Bit WS2812 5050 RGB LED + Integrated Driver Module For Arduino F - ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. ● serial cascade interface, through a signal line to complete the receiving and decoding of data.
RGB LED Ring 12 Bit WS2812 5050 RGB LED + Integrated Driver Module For Arduino - ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. ● serial cascade interface, through a signal line to complete the receiving and decoding of data.
8*8 Matrix Red LED Display Dot 74hc595 Driver Module For Arduino UNO MEGA2560 - Provided code for arduiuo UNO / MGEA2560. Square matrix display module 8x8 points. Pixel size: 3.0MM. Can display various patterns and characters. All products are quality checked. We will be happy to resolve any issues you may have in a cordial and friendly manner.
LEDupdates LED on off switch 12v 24v 6A Wave Switch for LED Strip light - This LED switch is compatible with all of our 12v and 24v LED showcase, module, stem pole light, and strip lights. Simply wave across the sensor to turn on and wave it again to turn off. Support 12v and 24v power.
Original 10W 6500K White Light LED Emitter 16mm/20mm Copper 1/3/5 Mode Driver - Emitter Model: 10w-XM-L2-U3. Output Power: 10W. LED Driver(16mm). 1 MODE:ON/OFF Switch,Only High(100% Output). 3 Mode:High,LOW,Fast Strobe. 5 Mode:High,Middle,Low,Fast Strobe,SOS. LED Driver(22mm). Used for LED:10w-XM-L-T6-U2,XM-L2 U2 U3,SSC P7 etc.
New Aluminum Dual 12-bit Music Level indicator LED Audio Spectrum VU Meter - 1× 12x2 LED Music Level Indicator. dB mode and AGC mode selection (ultra-wide range of AGC adaptive algorithm to ensure the best results). Exclusive software, which can significantly reduce the influence of input line noise.
3V 5V 12V 5MM LED Diode Light Clear 20cm Cable Pre-Wired With Plastic Holder - Light color: Red / Yellow / Blue /green/warm white/ White/fast multicolor/solw multicolor. Lens type: water clear. Light type: constant. Lead length: approx. Wave length: 5000nM - 6500nM. We will happy to help you to deal with it.
1/2/5/10PCS WS2812 WS 2811 5050 RGB Rainbow LED Driver Module Board 5V 8-Bit - A small chainable board with eight 5050 WS2812 RGB LEDs. 1/2/5/10PCS WS 2811 WS 2812 5050 RGB LED Lamp Panel Module 5V 8-Bit Rainbow LED Precise. breadboard pins and two mounting holes for securing this board to many different surfaces.
15W 94X50MM 9450 Warm White COB LED Panel Strip Lights DC12-24V F DIY car lamps - Material: LED COB. Light Color: Warm White. We will happy to help you to deal with it. Color Temperature:3000-3500k. We stand behind our products. Our aim: best price and best quality for you. We are always willing to work things out.
3W 5-35V LED Driver 700mA PWM Dimming DC to DC Step-down Constant Current - Output: 700mA ± 20mA. Supports PWM dimming. Drive 1-10 pcs 3W LED. Constant output current, low ripple. High level turn off the output. LED + LED anode connection, LED-LED cathode connection. Low level Open the output.
Black Board RGB LED Ring 16 Bit WS2812 5050 + Integrated Driver for Arduino - 1 x RGB LED Ring 16 Bit WS2812 5050 RGB LED with Integrated Driver. Arduino Module. Electronic Component. built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate.
100W 150W AC 220V Plant Grow Cool White Light LED Bulb Lamp With Smart IC Driver - Lamp Power: 100W +-10%. 1x Lamp with IC Driver. Wavelength: 380-840nm (used for Plant Grow). the module save more the room place to install the lamp in small lamp. This led chip adapter the new technology, the chip built-in the led driver in to the lamp module.
4/16/40/64Bit WS2812 Matrix LED 5050 RGB Full-Color Driver Board For Arduino - 1 x 8x5 40 LED Matrix WS2812 LED 5050 RGB Full-Color Driver Board Arduino. 64-Bit WS2812 8x8 LED Matrix LED 5050 RGB Full-Color Driver Black Board for Arduino. 1PCS 8x8 64 LED Matrix WS2812 LED 5050 RGB Full-Color Driver Board Arduino.
Single Mode 3.7V-18V 17mm Flashlight Driver + 16MM 6500K Cold White LED Bulb - 1x 16mm PCB 6500k 1200lm LED Bulb for flashlight. Application: Great for flashlight DIY. 1x 17mm Single MODE Driver. Note:It is original 10w XM-L2 led !!!!!not fake. Light Color:Cool White Light. Used for LED: Like10W XML-T6/U2,10W XM-L2-U2-U3, 10W-XP-L,14W XHP50.2 series etc.
5mm 8*8 8x8 Color RGB Dot Matrix LED Display Shield ATmega328P for Arduino - The driver circuit based on 3 MBI5168 constant current sink drivers and a M54564 darlington source driver, the Colorduino pairs the M54564 with a single DM163 constant current driver. Each channel provide a maximum current of 60 mA.
12V 5A Power Supply AC to DC Adapter for 3528 5050 LED Strip light CCTV PRO - DC POWER 12VDC 5 AMP POWER SUPPLY 12VDC LED Lighting Power Supply 5000mA Package Includes: (1) 12 VDC 5A Power Adapter Our Company has been Distributing Commercial Security Electronics & Batteries since 1991... Bulk & Wholesale Pricing Is Available On All Of Our Products For Quantity Purchases. We offer all of our customer’s free design options & technical support! Our office hours M-F 8 AM to 5 PM (EST.) Eastern Standard Time.
12V 5A Power Supply AC to DC Adapter Switching for LED Strip Light - DC POWER 12VDC 5 AMP POWER SUPPLY 12VDC LED Lighting Power Supply 5000mA Package Includes: (1) 12 VDC 5A Power Adapter A REAL COMPANY, WITH A REAL LOCATION AND REAL PEOPLE SERVING YOU! AAA Security Depot has been Distributing Commercial Security Electronics since 1991... Beware of basement operations with limited knowledge or unscrupulous operations AAA Security Depot, Corp. is located in our own 22,000 SQF facility in beautiful Miami, FL. We work closely with manufacturers around the world to bring you the best quality at the most competitive prices. We can obtain special pricing on any item listed by us for bulk orders. We have been a part of our community since 1991 and continue to help by providing a dynamic and growing employment atmosphere to our local workforce as well as a quality product to our customers.
1 X 1W LED Power Driver Supply Transformer 220V,1W1 - Constant curent LED Driver. Output power :1W. Output Frequency: 50-60Hz. Australia/New Zealand 7-12d West Asia/Middle East 7-12d. United Kingdom 7-12d Italy 7-12d. East/South Asia 7-12d France/West Asia 7-12d.
50W Full Spectrum LED COB chip DC12V 32V, Integrated Smart IC Driver 220V 110V - 50W COB LED DC12V,DC32V. Light source: COB. 50W Full Spectrum LED, Integrated Smart IC Driver 220V,110V. Color ratio:full spectrum 380nm-840nm. It is the newest trend for indoor plants. Advanced LED grow lights use less electricity, and create less heat, not only provides intense, effective lighting for indoor gardening system but also make the garden cool.This is a revolutionary step for LED grow lights which have previously been unable to act as the sole light source for the indoor garden.
5pcs 50W Full Spectrum 380-840NM LED COB chip DC12V Integrated Smart IC Driver - 5PCS DC12V 50W COB LED Full spectrum 380-840nm High Powe Grow Light for hydroponics. It is the newest trend for indoor plants. Advanced LED grow lights use less electricity, and create less heat, not only provides intense, effective lighting for indoor gardening system but also make the garden cool.This is a revolutionary step for LED grow lights which have previously been unable to act as the sole light source for the indoor garden.
50W Full Spectrum 380-840NM LED COB chip DC12V Integrated Smart IC Driver - 1PCS DC12V 50W COB LED Full spectrum 380-840nm High Powe Grow Light for hydroponics. It is the newest trend for indoor plants. Advanced LED grow lights use less electricity, and create less heat, not only provides intense, effective lighting for indoor gardening system but also make the garden cool.This is a revolutionary step for LED grow lights which have previously been unable to act as the sole light source for the indoor garden.
6 X RadioShack 5mm Green LED Holder Assembly With Resistor 2760271 BULK PACK NEW - 6 (SIX) RADIOSHACK 2760271/276-0271 GREEN LED WITH RESISTOR AND HOLDER. Has built in 680 ohm resistor. Luminous intensity (brightness): 100mcd (Average, or typical, light output at the rated max. This 5mm LED, or light-emitting diode, has a green lens that's often used as an electrical power indicator on computers, garage door openers and appliances. ).
4/16/40/64Bit WS2812 Matrix LED 5050 RGB Full-Color Driver Board For Arduino S - 1 x 8x5 40 LED Matrix WS2812 LED 5050 RGB Full-Color Driver Board Arduino. 64-Bit WS2812 8x8 LED Matrix LED 5050 RGB Full-Color Driver Black Board for Arduino. 1PCS 8x8 64 LED Matrix WS2812 LED 5050 RGB Full-Color Driver Board Arduino.
8x5 40 LED Matrix WS2812 LED 5050 RGB Full-Color Driver Board For Arduino NEW - Shaping and then output to ensure line waveform distortion will not accumulate. built-in signal shaping circuit, any one pixel after receiving the signal through the waveform. Built-in power-on reset and brown-out reset circuit.
3258 5050 SMD LED Strip Power Supply/Transformer 12V 50W - Model: 12V / 50w. Working power: 50W. 105 ℃ output capacitor, long life. have a short circuit, overload protection. inrush current suppression circuit included. 2, Do not short the power cord with each other, causing a short circuit;.
50pcs 6V FOR LCD TV repair LG led TV backlight strip light-diode 3535 SMD LED - Viewing angle : 120°. Storage Temperature (Tstg): -40 - +100 °C. Soldering Temperature (Tsld): Reflow Soldering:260 °C. Color Correlated Temperature (CCT) for 10secs. The images shown are not the actual item and are for yourreference only.
50pcs 6V LCD TV repair led TV backlight strip light-diode 3535 SMD LED - Viewing angle : 120°. Storage Temperature (Tstg): -40 - +100 °C. Soldering Temperature (Tsld): Reflow Soldering:260 °C. Color Correlated Temperature (CCT) Rate(item arrived) 0.00% 47.1% 31.4% 17.6% 3.8% 0.1%.
20pcs 6V LCD TV repair led TV backlight strip light-diode 3535 SMD LED - Viewing angle : 120°. Storage Temperature (Tstg): -40 - +100 °C. Soldering Temperature (Tsld): Reflow Soldering:260 °C. Color Correlated Temperature (CCT) Rate(item arrived) 0.00% 47.1% 31.4% 17.6% 3.8% 0.1%.
100Pcs 3528 SMD lamp beads for 47inch LG 6916L R1 L1 R2 L2 LED Strip,Repair TV - Type: 3528. This SMD lamp beads is compatible with below LG LED Strip bar Application: LED TV backlight/Module lights/Advertising lights and so on/Spotlights. Light efficiency: 100-110LM / W. 6916L-1318A 6916L-1319A 6916L-1320A 6916L-1321A set.
1X 20W 380NM-840NM Full Spectrum LED COB Chip, Integrated Smart IC Driver 220V - Color temperature: 380 - 840nm. Light source: COB. Full spectrum color the module save more the room place to install the lamp in small lamp.the electronic compent are uesed waterproof glue, so it can use for the mistureproof place.
15W 94X50MM 9450 White COB LED Panel Strip Lights DC12-24V For DIY car lamps - Material: LED COB. Light Color: cool white. Color Temperature:6000-6500k. We will happy to help you to deal with it. Our aim: best price and best quality for you. We stand behind our products. We are always willing to work things out.
10x IRFB11N50APBF - MOSFET N 500V 11A TO-220 TRANSISTOR VISHAY FORMERLY I.R. - MOSFET, N, 500V, 11A, TO-220. Continuous Drain Current Id: 11A. Current Id Max: 11A. Transistor Polarity: N Channel. Transistor Case Style: TO-220AB. Junction to Case Thermal Resistance A: 0.75°C/W. Current Temperature: 25°C.
15W 94X50MM 9450 Warm White COB LED Panel Strip Lights DC12 For DIY lamps - 1PCS 15W COB LED. Material: LED COB. Light Color: Warm White. Fresh style design and top performance, this LED Car Light is a great accessory for your vehicle! LED bulbs are not as bright as standard incandescent bulbs.
WS2812 LED 8x8 64 5050 RGB LED Matrix Full-Color Driver Board For Arduino New - 1 x WS2812B 8 x 8 64-Bit 5050 RGB LED Lamp Panel For Arduino. Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not accumulate. Built-in electric reset circuit and power lost reset circuit.
1X 220VAC High Power 50W led chip built-in driver Cool white 30000k LED lamps - 170-265V 220V High Power 50W led chip built-in driver Cool white 20000-25000K. Lamp Power: 50W +-10%. 1 x 170-265V 220V High Power 50W led chip built-in driver LED. This led chip adapter the new technology, the chip built-in the led driver in to the lamp module.
4 16 40 64 Bit WS2812 Matrix LED 5050 RGB Full-Color Driver Board For Arduino - 40-Bit 8x5 LED Matrix WS2812 LED 5050 RGB Full-Color Driver Board For Arduino. 1 x 8x5 40 LED Matrix WS2812 LED 5050 RGB Full-Color Driver Board Arduino. 64-Bit WS2812 8x8 LED Matrix LED 5050 RGB Full-Color Driver Black Board for Arduino.
4/16/40/64Bit WS2812 Matrix LED 5050 RGB Full-Color Driver Board For Arduino - 40-Bit 8x5 LED Matrix WS2812 LED 5050 RGB Full-Color Driver Board For Arduino. 1 x 8x5 40 LED Matrix WS2812 LED 5050 RGB Full-Color Driver Board Arduino. 64-Bit WS2812 8x8 LED Matrix LED 5050 RGB Full-Color Driver Black Board for Arduino.
High Power 10W 900mA Constant Current LED Light Driver Supply DC12-24V - 10w LED driver. 1pcs Constant Current LED Driver. Application:Fit for 1x10w led 3 in series and 3 in parallel. Storage Temperature:-20-80. Function:Open circuit,Short circuit and Over. hope you could understand.
qty:10 24 VOLTS 75 WATTS 120-277/24 LED DRIVER t new - To IEC 61347-2-13 | acc. to IEC 62384 | acc. to EN 55015 | acc. to IEC 61000- 3-2 | acc. to IEC 61000-3-3 | acc. to IEC 61547 | acc. to UL 1310 | acc. to UL 48 | acc.
2/10/50PCS 10 Segment Digital Red LED Bar Graph Display Ultra Bright NEW - Chip: WS2813 dual-data line led chip, upgrade ws2812b. Chip has built-in Shaping circuit, the signal distortion will not be cumulative and can be displayed stably. serial cascade port, can finish the receiving and decoding of the data by one piece of line.
2/10/50PCS NEW 10 Segment Digital Red LED Bar Graph Display Ultra Bright Red - Chip: WS2813 dual-data line led chip, upgrade ws2812b. Chip has built-in Shaping circuit, the signal distortion will not be cumulative and can be displayed stably. serial cascade port, can finish the receiving and decoding of the data by one piece of line.
2 PCS RGB LED Ring 12 Bit WS2812 5050 RGB LED + Integrated Driver Module - ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. ● serial cascade interface, through a signal line to complete the receiving and decoding of data.
72W UV Light LED Strip Ultraviolet Back Adhesive 5M 300LEDs SMD 5050 Waterproof - Type: 5050. 1 roll 5M UV IP65 waterproof Strip only. Number of Lights/5M: 300 SMD LEDs. The LEDs we used to maufacture the strip are of high quality & supper brightness & reliability. Dual board design, less heat produced; avoid to make the strip over heated.
50M/Metters 10mm 3M Double Sided Tape Adhesive for LED Light 5050 Strip light - Tape width: 10mm. Tape type: Double-side 3M Tape. Made of non-woven cloth and coating with acrylic on both sides, half transparant color, very easy to operate, good Durability, temperature withstanding, strong adhesive, waterproof.
Norlux 132589 LED Driver 120-277VAC 58vdc 45W Max Dimmable 1-10v Dry or Damp - Norlux 132589. 120-277VAC, 58vdc, 45W, Dry or Damp Location, Max Dimmable 1-10v. LED Driver Module Board. We will make every attempt possible to resolve the issue if we made a mistake, (It happens). This stamp does not affect the functionality or value of the item.
1PCS WS2812B 8-Bit RGB LED Ring 5050 Built-in RGB Driver for Arduino - ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. We will leave it for everyone that leaves it for us.
1PCS NEW WS2812B 8-Bit RGB LED Ring 5050 Built-in RGB Driver for Arduino - ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. We will leave it for everyone that leaves it for us.
WS2812B 8-Bit RGB LED Ring 5050 Built-in RGB Driver for Arduino - ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. We will leave it for everyone that leaves it for us.
1x NEW WS2812B 8-Bit RGB LED Ring 5050 Built-in RGB Driver for Arduino - ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. AFRICA : All countries in Africa;.
2x NEW WS2812B 8-Bit RGB LED Ring 5050 Built-in RGB Driver for Arduino - ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. AFRICA : All countries in Africa;.
2PCS NEW WS2812B 8-Bit RGB LED Ring 5050 Built-in RGB Driver for Arduino - ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. We will leave it for everyone that leaves it for us.
5PCS WS2812B 8-Bit RGB LED Ring 5050 Built-in RGB Driver for Arduino - ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. We will leave it for everyone that leaves it for us.
2PCS WS2812B 8-Bit RGB LED Ring 5050 Built-in RGB Driver for Arduino - ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. We will leave it for everyone that leaves it for us.
2PCS RGB LED Ring 12 Bit WS2812 5050 RGB LED + Integrated Driver Module - ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. ● serial cascade interface, through a signal line to complete the receiving and decoding of data.
5PCS RGB LED Ring 12 Bit WS2812 5050 RGB LED + Integrated Driver Module - ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. ● serial cascade interface, through a signal line to complete the receiving and decoding of data.
2PCS RGB LED Ring 12 Bit WS2812 5050 RGB LED + Integrated Driver Module - ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. ● serial cascade interface, through a signal line to complete the receiving and decoding of data.
2PCS RGB LED Ring 12 Bit WS2812 5050 RGB LED + Integrated Driver Module SK - ● built-in signal shaping circuit, any one pixel after receiving the signal through the waveform shaping and then output to ensure line waveform distortion will not accumulate. ● serial cascade interface, through a signal line to complete the receiving and decoding of data.
50PCS 10 Segment Digital Red LED Bar Graph Display Ultra Bright - This 10 segment digital red LED bar display is widely used in single chip computer, audio equipment, instrument panels, and digital read out display, etc. It is up to industrial standard size, low power consumption design.
5PCS 10 Segment Digital Red LED Bar Graph Display Ultra Bright - This 10 segment digital red LED bar display is widely used in single chip computer, audio equipment, instrument panels, and digital read out display, etc. It is up to industrial standard size, low power consumption design.
2PCS 10 Segment Digital Red LED Bar Graph Display Ultra Bright NEW CF - This 10 segment digital red LED bar display is widely used in single chip computer, audio equipment, instrument panels, and digital read out display, etc. It is up to industrial standard size, low power consumption design.
5PCS NEW 10 Segment Digital Green LED Bar Graph Display Ultra Bright CA - This 10 segment digital Green LED bar display is widely used in single chip computer, audio equipment, instrument panels, and digital read out display, etc. It is up to industrial standard size, low power consumption design.
2PCS NEW 10 Segment Digital Green LED Bar Graph Display Ultra Bright CA - This 10 segment digital Green LED bar display is widely used in single chip computer, audio equipment, instrument panels, and digital read out display, etc. It is up to industrial standard size, low power consumption design.
50PCS NEW 10 Segment Digital Blue LED Bar Graph Display Ultra Bright - This 10 segment digital Blue LED bar display is widely used in single chip computer, audio equipment, instrument panels, and digital read out display, etc. It is up to industrial standard size, low power consumption design.
5PCS NEW 10 Segment Digital Blue LED Bar Graph Display Ultra Bright - This 10 segment digital Blue LED bar display is widely used in single chip computer, audio equipment, instrument panels, and digital read out display, etc. It is up to industrial standard size, low power consumption design.
10PCS NEW 10 Segment Digital Blue LED Bar Graph Display Ultra Bright NEW CA - This 10 segment digital Blue LED bar display is widely used in single chip computer, audio equipment, instrument panels, and digital read out display, etc. It is up to industrial standard size, low power consumption design.
2PCS 10 Segment Digital Blue LED Bar Graph Display Ultra Bright CA NEW - This 10 segment digital Blue LED bar display is widely used in single chip computer, audio equipment, instrument panels, and digital read out display, etc. It is up to industrial standard size, low power consumption design.
50PCS NEW 10 Segment Digital Green LED Bar Graph Display Ultra Bright CA - This 10 segment digital Green LED bar display is widely used in single chip computer, audio equipment, instrument panels, and digital read out display, etc. It is up to industrial standard size, low power consumption design.
50PCS 10 Segment Digital Yellow LED Bar Graph Display Ultra Bright NEW - This 10 segment digital Yellow LED bar display is widely used in single chip computer, audio equipment, instrument panels, and digital read out display, etc. It is up to industrial standard size, low power consumption design.
5PCS 10 Segment Digital Yellow LED Bar Graph Display Ultra Bright CA NEW - This 10 segment digital Yellow LED bar display is widely used in single chip computer, audio equipment, instrument panels, and digital read out display, etc. It is up to industrial standard size, low power consumption design.
10PCS 10 Segment Digital Yellow LED Bar Graph Display Ultra Bright CA NEW - This 10 segment digital Yellow LED bar display is widely used in single chip computer, audio equipment, instrument panels, and digital read out display, etc. It is up to industrial standard size, low power consumption design.
2PCS 10 Segment Digital Yellow LED Bar Graph Display Ultra Bright CA NEW CA - This 10 segment digital Yellow LED bar display is widely used in single chip computer, audio equipment, instrument panels, and digital read out display, etc. It is up to industrial standard size, low power consumption design.
*FCB 3W LED Driver for Luxeon White Green Blue *USA *fcbusa *Sure Electronics - FCB Electronics. 3 W LED Driver for Luxeon White Green Blue. Maximum Load: 1-4pcs Luxeon LEDs, no less than 3 Watt each. Efficiency: 78% @ 15V input, 3 3W Luxeon LEDs in serial connection. For 3W single color LEDs, use this 3W LED driver.
1-3x1w LED Power Driver Supply 300mA DC3-14V For 3pcs 1W High Power LED - Output: DC3-14V, 300MA+-5%. Usage: Used for the 1-3pcs 1W LED Light. Part Number: (1-3) 1W. We will happy to help you to deal with it. Pleasure you. We are always willing to work things out. We stand behind our products.
4-5x1w LED Power Driver Supply 300mA DC12-18V For 5pcs 1W High Power LED - Output: DC12-18V, 300MA+-5%. Usage: Used for the 4-5pcs 1W LED Light. Part Number: (4-5) 1W. We will happy to help you to deal with it. Pleasure you. We are always willing to work things out. We stand behind our products.
8-15x1w LED Power Driver Supply 300mA DC24-55V For 15pcs 1W High Power LED - Output: DC24-55V, 300MA+-5%. Usage: Used for the 8-15pcs 1W LED Light. Part Number: (8-15) 1W. We will happy to help you to deal with it. Pleasure you. We are always willing to work things out. We stand behind our products.
3W 700mA DC-DC 7.0-30V to 1.2-28V LED lamp Driver Support PWM Dimmer - Output Current: 700mA. Internal power dissipation: Vin = 24v, 5LEDS maximum 700mW. LED +: access the LED anode. LED-: then the LED cathode. Input filter: capacitor. Output short circuit protection: sustainable.
0-10+ Amp capable LED Flashlight driver board 17mm, Cree XHP70, XHP50, XML2, XPL - For use with Cree XML2, XHP50, XHP70 and more. For use with 6V LEDs: For Cree XHP50, XHP70 or MTG2 choose the zener modded 6V driver option. Then a single emitter or multiple emitters can be wired inparalle l and powered from 2x IMR li-ion cells such as 18650 or 26650.
LED RGB Matrix Module Driver Board 8x8 + Dot Matrix for Arduino AVR - If you have an Arduino UNO, but just want to drive a RGB LED Matrix, you can consider this Colors shield, it's compatible with Colorduino v2.0. The driver circuit based on 3 MBI5168 constant current sink drivers and a M54564 darlington source driver, the Colorduino pairs the M54564 with a single DM163 constant current driver.
5M 300 Leds SMD 5050 RGB Led Strip Lights Waterproof + Touch Panel RF Controller - New 5M 300Leds RGB 5050 SMD Flexible Led Strip Lights. Led Chip Model:SMD 5050. Color: Full color RGB. Working Current: 4.8-5.0A (5M). 3 channels, mainly used for RGB led products. Every 3 leds is cuttable without damaging the rest strip.
5M 300 Leds SMD 5050 RGB Led Strip Lights DIY Lamps + Touch Panel RF Controller - New 5M 300Leds RGB 5050 SMD Flexible Led Strip Lights. Led Chip Model:SMD 5050. Color: Full color RGB. 3 channels, mainly used for RGB led products. Working Current: 4.8-5.0A (5M). Every 3 leds is cuttable without damaging the rest strip.
50PCS 10 Segment Digital Red LED Bar Graph Display Ultra Bright NEW - It is up to industrial standard size, low power consumption design. LED color: Red. Ultra brightness indicator light. Your support will keep us moving forward forever. Size: 2.5 x 1.0 x 1.5 cm. Material: plastic.
10PCS 10 Segment Digital Red LED Bar Graph Display Ultra Bright NEW - It is up to industrial standard size, low power consumption design. LED color: Red. Ultra brightness indicator light. Your support will keep us moving forward forever. Size: 2.5 x 1.0 x 1.5 cm. Material: plastic.
5PCS 10 Segment Digital Red LED Bar Graph Display Ultra Bright NEW - It is up to industrial standard size, low power consumption design. LED color: Red. Ultra brightness indicator light. Your support will keep us moving forward forever. Size: 2.5 x 1.0 x 1.5 cm. Material: plastic.
2PCS 10 Segment Digital Red LED Bar Graph Display Ultra Bright NEW - It is up to industrial standard size, low power consumption design. LED color: Red. Ultra brightness indicator light. Your support will keep us moving forward forever. Size: 2.5 x 1.0 x 1.5 cm. Material: plastic.
20W LED Waterproof Driver Supply + 20w full spectrum led grow chip 380-840nm - Full spectrum LED Grow Chip ---20w 380nm~840nm. 20W LED Grow Chip. 20w LED driver. 1pcs 20W led waterproof drive. Color ratio:full spectrum 380nm-840nm. LED grow chip details Application:Fit for 1x20w led 10 in series and 2 in parallel (or 5-10pcs 3W led bead).
DC 12V Input 50W LED Driver + 50w COB full spectrum led grow chip 380-840nm DIY - Full spectrum LED Grow Chip ---50w 380nm~840nm. 50w Constant Current LED Driver 12v + 50w full spectrum led grow chip 380-840nm. 50W LED Grow Chip. 50w LED driver. 1kit 50w 380-840nm +50w 12v driver. Color ratio:full spectrum 380nm-840nm.
DC 12V Input 30W LED Driver + 30w COB full spectrum led grow chip 380-840nm DIY - Full spectrum LED Grow Chip ---30w 380nm~840nm. 30w Constant Current LED Driver 12v + 30w full spectrum led grow chip 380-840nm. 30W LED Grow Chip. 30w LED driver. 1kit 30w 380-840nm +30w 12v driver. Color ratio:full spectrum 380nm-840nm.
Constant Current Driver for 10-18pcs 3W High Power LED AC85-265V 40w 600mA - Output Current: 600mA ±5%. can work for 10-18pcs 3W led chip n series connection. 1pcs 10-18x3W Constant Current Driver for 12-18pcs 3W High Power LED. We will happy to help you to deal with it. We stand behind our products.
Driver Input 85-265V Output DC18-33V 600MA for 6-10X 3W High Power LED Light - Output Current: 600mA. Usage: Used for the 6~10pcs 3W LED Light. 1pcs 6-10x3W Constant Current Driver for 6-10pcs 3W High Power LED. TC: 75 degree (MAX). TA: 50 degree (MAX). Output open protection. Output short-circuit protection.
10pcs 1W 3W High Power LED lens 16mm convex pmma 60degree with black holder - Material: optical grade PMMA (Lens material: optical grade PMMA). Angle: (LED lens angle) 60 °. Transmittance: 85% -93% (Lens transmittance: 85% to 93%). We are always willing to work things out. We stand behind our products.
12V RF Wireless Remote Switch Controller Dimmer for Mini LED Strip Light New EVM - Instructions for RF Wireless Remote 1. Turn On/ Standby Press this key to turn on unit or switch to standby mode. Lighting mode Switch to lighting mode from dynamic mode. Dynamic Mode Adjust Switch to dynamic mode from lighting mode, or switch between different dynamic modes.
5M Cool White 335 SMD 300 LED Side View Emitting Light Strip 12V led strip - The light source of this side view LED light strip is 335 SMD LED, Which is super bright and high degree of flexibility. 335 SMD LED is quite different to 3258 and 5050, it's a side view SMD LED,which fixed on the edge of the baseboard (skirting white).
10W Deep Red 660nm + Blue 445nm 7:2 LED +driver Plant Grow Growth lights - Wave length: 7pcs Red 660nm 2pcs Blue 455nm. Work for 1pc 10W 8:1 red blue led bead. 12V LED Driver: 1pcs. 1pcs led driver. 1pcs led chip. Emitted Color: Red + Blue. Operation Temperature: -25-50C. ( If slow, you can also receive. ).
M16 5W 5 Watt 4-6x1W High Power LED Driver Input Voltage 12V-24V 300mA 10pcs - Output Current:300MA. 10pcs MR16 5X1W led driver. 4-6 1W LED Driver. We will happy to help you to deal with it. We are always willing to work things out. We stand behind our products. Our aim: best price and best quality for you.
Constant Current Driver for 30W /(3-4pcs) 10W High Power LED in series 950mA - Output Current: 950mA. Usage: Used for the 30w or (3~4pcs) 10W LED Light. Aluminium Alloy Material. 1pcs 6-12x3W Constant Current led Driver. TC: 75 degree (MAX). TA: 50 degree (MAX). We will happy to help you to deal with it.
10W-18W (10-18)X3W IP67 Waterproof LED Driver for 3W LED Light DC30V~60V 650mA - Output Current: 650mA. Usage: Used for the 10~18pcs 3W LED Light. Working temperature: -20-80 Deg. Output open protection. We will happy to help you to deal with it. We stand behind our products. We are always willing to work things out.
LED Lighting Strip 90 degree Right Angle 4-Pin 10 Pcs. - Connection is made easy through the use of four-pin female connector. Makes installing LED lighting in corners a breeze. No exceptions. Distinct burn odor and/or discolored/black spider around base of cone are characteristic of a burned voice coil.
10 PCS 15mm 4 Pin two Connector with Cable For SMD LED 5050 RGB Strip Light - Specifications: 10mm 4 pin Connector with Cable For LED Strip SMD 5050 RGB, No Need Soldering. 10 pcs x 15cm 4 pin two Connector with Cable For LED Strip SMD 5050 RGB. With this item you can connect your 5050 LED Stripe as your wish.
24keys SMD IR Remote Controller for 3528 5050 led strip new 1set - (Functions: Flash / Strobe / Fade / Smooth Great for SMD LED light lamp strip. Battery will be removed.). Output Current: 6A max. wrong item). We stand behind our products. Canada Rate(item arrived) 0.00% 47.1% 31.4% 17.6% 3.8% 0.1%.
MR16 LED Build In Driver AC/DC 12v 3*1w 3W Constant Current Drive 10PCS - Drive power:3 1W. Over 90% energy saving than incandescent or halogen bulbs. More energy efficient than incandescent and most halogen lA. Output Cable Length: 45mm. Output Current:300mA±5%. Length: 28mm; width: 18mm; Height: 13mm;.
10-18X3W AC/85-265 led driver for High power LED no-waterproof constant current - High power LED waterproof constant current source 10-18X3W. 1PCS 10-18X3W LED driver for 3W high power LED. two the blue line as the input of 220V group, a red a black group isconnected to the output of the LED lamp, red is black anode cathode.
10pcs 3-6x2 High Power LED Driver AC 85-265V to DC9-21V 430mA - Output Current: 430mA. Quantity: 10pcs. 10pcs x (3-6) x2W led driver. We will happy to help you to deal with it. We are always willing to work things out. We stand behind our products. Our aim: best price and best quality for you.
10pcs 3-4x3 W Watt High Power LED Light lamp Driver Power Supply 85-265V 600mA - Output Current :600mA±5%. lights, Mood Lighting, LED module, Craft flashlights, headlights. Usage and Function ranges, like Architectural Lighting, General lighting, Automotive. Widely used for indoor and outdoor lighting and decorations in all.
1pcs 3-4x3 W Watt High Power LED Light lamp Driver Power Supply 85-265V 600mA - Output Current :600mA±5%. lights, Mood Lighting, LED module, Craft flashlights, headlights. Usage and Function ranges, like Architectural Lighting, General lighting, Automotive. Widely used for indoor and outdoor lighting and decorations in all.
1pcs 12-18x1W Constant Current LED Light Driver Power Supply AC85-277V - Working temp:0~40℃. Storage temp:-20~60℃. Output Current: 300mA<±5%. We will happy to help you to deal with it. Conversion Efficiency: ≥80%. Power: 12-18x1W. Pleasure you. We are always willing to work things out.
3-4x3 W Watt High Power LED Light lamp Driver Power Supply 85-265V 600mA - Output Current :600mA±5%. lights, Mood Lighting, LED module, Craft flashlights, headlights. Usage and Function ranges, like Architectural Lighting, General lighting, Automotive. Widely used for indoor and outdoor lighting and decorations in all.
2pc 3x3W Watt High Power LED Light lamp Driver Power Supply 85-265V 650mA - Application: driver for 3pcs 3W high Power led. 2pcs x 3 x3W led driver. Output Current: 600-650mA. Storage Temperature: -20-80C. We will happy to help you to deal with it. Pleasure you. We are always willing to work things out.
Constant Current Driver for 12-18pcs 3W High Power LED AC85-265V 40w 600mA - Output Current: 600mA ±5%. can work for 12-18pcs 3W led chip n series connection. 1pcs 12-18x3W Constant Current Driver for 12-18pcs 3W High Power LED. We will happy to help you to deal with it. We stand behind our products.
Constant Current Driver for 14-18pcs 3W High Power LED AC85-265V - Usage: Used for the 14~18pcs 3W LED Light. Constant Current Driver for 14-18pcs 3W High Power LED AC85-265V to DC36-75V 680mA. 1pcs 14-18x3W Constant Current Driver for 14-18pcs 3W High Power LED. TA: 50 degree (MAX).
meanwell ldd-1000h led driver 1000mA - Output Current: 1000mA. first, we will be happy to work. 1, We support our products. ( If slow, you can also receive within one month and. ).
100pcs x 45degrees led Lens for 1W 3W 5W Hight Power LED with holder - Quantity : 100pcs LENs for hight power LED. Lens Degree: 45°. 100X 45degree led lens. Len Holder Color :black (Also have white). We will not be responsible for any duties and. answer for you 。. Len Material : PMMA.
100pcs x 90 degrees led Lens for 1W 3W 5W Hight Power LED with holder - Quantity : 100pcs LENs for hight power LED. 100X 90 degree led lens. Lens Degree: 90°. Len Holder Color :black (Also have white). We will not be responsible for any duties and. answer for you 。. Len Material : PMMA.
100pcs x 120degrees led Lens for 1W 3W 5W Hight Power LED with holder - Quantity : 100pcs LENs for hight power LED. Lens Degree: 120°. 100X 120degree led lens. Len Holder Color :black (Also have white). We will not be responsible for any duties and. answer for you 。. Len Material : PMMA.
10pcs x 120degrees led Lens for 1W 3W 5W Hight Power LED with holder - Quantity : 10pcs LENs for hight power LED. Lens Degree: 120°. 10X 120degree led lens. Len Holder Color :black (Also have white). We will not be responsible for any duties and. answer for you 。. Len Material : PMMA.
10pcs x 45degrees led Lens for 1W 3W 5W Hight Power LED with holder - Quantity : 10pcs LENs for hight power LED. Lens Degree: 45°. 10X 45degree led lens. Len Holder Color :black (Also have white). We will not be responsible for any duties and. answer for you 。. Len Material : PMMA.
10pcs x 30degrees led Lens for 1W 3W 5W Hight Power LED with holder - Quantity : 10pcs LENs for hight power LED. 10X 30 degree led lens. Lens Degree: 30°. Len Holder Color :black (Also have white). We will not be responsible for any duties and. answer for you 。. 1、 We support our products.
10pcs x 60 degrees led Lens for 1W 3W 5W Hight Power LED with holder - Quantity : 10pcs LENs for hight power LED. 10X 60 degree led lens. Lens Degree: 60°. Len Holder Color :black (Also have white). We will not be responsible for any duties and. answer for you 。. Len Material : PMMA.
LED Flashlight Driver 0.76A 17mm Multi-Group Circuit XM-L XP-E XM-L2 CC XP-G - I believe that it is the most versatile 17mm driver out there. (1) New 0.76A Constant Current Flashlight Driver w/ spring and pre-tinned leads already installed. At around 3 volts the light will reduce power to around half, at 2.8 volts the light will blink and then shut off.
LED Flashlight Driver 1.14A 17mm Multi-Group Circuit XM-L XP-E XM-L2 CC XP-G - I believe that it is the most versatile 17mm driver out there. (1) New 1.14A Constant Current Flashlight Driver w/ spring and pre-tinned leads already installed. At around 3 volts the light will reduce power to around half, at 2.8 volts the light will blink and then shut off.
10Pcs 2 Pin LED Strip Connectors 3528/5050 10mm Width PCB Ribbon Single Color - 2:For non-waterproof LED strip light, just slide in the ribbon and make sure positive and negative poles match; If you feel there is a loose connection, thicken your strip light by adding an extra chip in between and make sure the built-in soldering point touches your strip light tightly.
50pcs 120 degrees led Lens Reflector for 1W 3W 5W Hight Power LED with holder - 50pcs Led Lens 120 Degree For 1w 3w 5w led Lamp light Black Holder. Quantity: 50pcs. Beam Angle: 120 Degree. Lens Dimaeter: 20mm. Lens Height: 10.5mm. Holder Height: 13mm. lens: water clear. Len Holder Color :black (Also have white) clear.
50pcs 90 degrees led Lens Reflector for 1W 3W 5W Hight Power LED with holder - 50pcs Led Lens 90 Degree For 1w 3w 5w led Lamp light Black Holder. Quantity: 50pcs. Beam Angle: 90 Degree. Lens Dimaeter: 20mm. Lens Height: 10.5mm. Holder Height: 13mm. lens: water clear. Len Holder Color :black (Also have white) clear.
10W Warm White LED Chip + 10W DC12V-24V Constant Current LED Driver - 1pcs 10w Warm white led. 1pcs 10w led drive. Application:Fit for 1x10w led 3 in series and 3 in parallel. Resin (Mold): Silicone Resin. Color:warm white 2800-3200K(you can choose 6000-6500k, 4000k ,10000k, 20000k, 30000k).
3X3W 700mA MR16 LED driver transformer power supply for MR16 12V lamp - MR16 3X3W led driver. 10pcs MR16 3X3W led driver. Output Current: 700mA. Suit for 3pcs 3W LED or 1pcs 10W led. DC output: 9-11V DC. We will happy to help you to deal with it. Pleasure you. We are always willing to work things out.
75W 12V 6.3A LED driver adapter transfor for led stip light light, 90-240V input - 12V 6.3A led driver adpater. 1pcs 12V 6.3A led driver. Max current output: 6.3A. We will happy to help you to deal with it. We stand behind our products. We are always willing to work things out. Our aim: best price and best quality for you.
10pcs x 30degrees led Lens for 1W 3W 5W Hight Power LED with holder - 10pcs x 30 degrees led Lens for 1W 3W 5W. Quantity : 10pcs LENs for hight power LED. Hight Power LED. Lens Degree: 30°. Len Holder Color : black (Also have white). We stand behind our products. We are always willing to work things out.