PINGEUI Heavy Duty Pipe Vise, Forged Bench Yoke Pipe Vice for Holding Pipe, F... - WHY CHOOSING US ?. Just install it with bolt-on on workbenches and stands, left and right mounting options. We'll get back to you within 24 hours. Manufacturer: PINGEUI. Part Number: PINGEUI. EASILY OPERATE - The pipe vice requires a small amount of assembly that just tightens all the nuts and bolts and holds the pipe really well.
Hollands 401 Bench Mount Pipe Vise ~ Erie PA USA - This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the sale. This item is to be used for its intended purpose.
Antique J H Williams Co No. 1 Chain Pipe Vice-Rare~Read All - This old JH Williams no. 1 chain pipe Vice is in very good condition and although dirty it appears to be ready for use. Never mind the next paragraph. We at Galaxyartifacts pride ourselves on our prices, quality and value and we apologize in advance for this inconvenience.
VIntage Parker Reed Ridgid Wilton Vulcan NO. 2 UP TO 3” PIPE VISE Cast Iron - Not sure what the brand name is it only says number 2Nice vintage tool here with no cracks that I can see It’s in working condition and there’s not a lot of rust it was in a nice basement in Chicago when I found it it has a mount so that you can mount it to a table bench or truck one side has a nut and bolt on the other side has a little plug or slug that you knock out it’s kind of heavy
Reed Mfg. Co. No. 700 Yoke Pipe Vise - Pat. 1914 - HERE IS A GOOD USED REED NO.700 SMALL PIPE VISE. THIS UNIT IS IN VERY GOOD CONDITION FOR ITS AGE. THE VISE IS DATED NOV 1914. THERE IS NO BROKEN PARTS AND REPAIRED PARTS ON THIS NICE OLD TOOLS.
Reed Mfg 6 In Capacity Tripod Chain Vise - Reed tripod vises remain the sturdiest on the market. Tripods are manufactured with the heaviest gauge steel, overlapping hinges, and the best adjustable tray clamp, not a set screw, to keep the lower tray assembly and entire portable workbench tight – even after many hours of use!
Reed Mfg 06027 FPV20 Field Pipe Vise, 2" - 20" - Reed Mfg FPV20 Field Pipe Vise, 2" - 20". More pipe capacity than other REED vises and 2,000 lb (909 kg) vise capacity, yet weighs only 22 lbs (10 kg) without legs and backbone. Super choice for pre-trench work and above ground cuts.
SELF CENTERING DRILL PRESS JIG Tube Pipe Round Stock - Simply set this self centering jig in your drill press, bolt it down and the bit will always hit center with no marking or center punching required! The jig features a heavy duty extruded aluminum construction and convenient ruler markings.
Ridgid Pipe Mount Vise Jaw 1/8 - 2 1/2 - This is a pipe vise jaw made by Ridgid. It is marked 1/8 - 2 1/2 on one side. Pictures are for representation only. The item you get will have similar wear.
Ridgid Pipe Vise By2A - RIDGID BY2A PORTABLE YOKE VISE 1/8 IN. TO 2 1/2 IN. YOKE VISE CAN BE MOUNTED ON A WORK BENCH, SAW HOURSE ETC. The Bottom Clamp can also be removed for a Permanent Mount on a Tripod.
Vintage Workbench Clamping Mount for Erie Pipe Vise #00-H - WORKBENCH CLAMP MOUNT -- FOR A ERIE PIPE VISE # 00-H. It was custom fabricated to make the pipe vise portable. The pipe Vise is NOT included but is shown for illustrative purposes only. It easily attaches to Erie Model 00-H, with the 3 included bolts, and may fit other models.
Used/Missing Locking Pin Reed 3" Pipe Vise - This item is:______Used/Missing Locking Pin Reed 3" Pipe Vise ______________________________________________________________ This item is used. See photos. Most boxes have been opened for inspection and photos.
HFS(R) Forged Pipe Vise #1 Size: 1/8" - 1-1/2" (10-60Mm) - This hinged pipe vise can handle any size pipe from 1/8th" up to 1-1/2". The locking hinge makes it easy to insert and remove long pipes without the need to feed through through. The wide threads on the lock-down screw provide plenty of torque to hold the pipe in place whether you're cutting or threading.