Black 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine$48.50 Buy It Now or Best Offer
Cross Slide Drill Press Vise 2 Way X-Y Clamp Heavy Duty Machine Slide Metal Mill$48.50 Buy It Now or Best Offer
Heavy Duty 4" Cross Slide Drill Press X- Y Compound Vise Bench Metal Milling US$48.50 Buy It Now or Best Offer
4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamp Machine$48.50 Buy It Now or Best Offer
Heavy Duty 4" Cross Drill Press Vise Slide Metal Milling 2 Way X-Y Clamp Machine$48.50 Buy It Now or Best Offer- Heavy Duty 4" Cross Slide Drill Press X- Y Compound Vise Bench Metal Milling US$48.50 Buy It Now or Best Offer
4" Cross Slide Drill Press Vise 2 Way X-Y Compound Vise Metal Milling Clamping$48.50 Buy It Now or Best Offer
4" Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black$48.50 Buy It Now or Best Offer
4" Heavy Duty Cross Drill Press Vise Slide Metal Milling 2 Way Clamp Machine Set$48.50 Buy It Now or Best Offer
4 inch Heavy Duty Cross Vise Clamp Machine Slide Drill Press Vice Meta Milling$48.50 Buy It Now or Best Offer
Cross Slide Vise 4" inch Wide Drill Press X - Y Clamp Milling Heavy Duty 2 Way$38.50 Buy It Now or Best Offer
Vintage Athol 614 1/2 Machinist Vise 4 1/2'' Jaw Cast Iron,Athol Mass Usa - Used
$300.00 Buy It Now
Multifunction Worktable Milling Machine,Cross Slide X Y Table Drill Vise Fixture$39.00 Buy It Now or Best Offer
Columbian D44 Swivel Base Bench Vise 4” Jaw w/ Pipe Grips USA C6
$49.99 Buy It Now or Best Offer
Vintage Baker 63-3 Bench Vise 3 1/2" Jaws Swivel Base Opens 3 1/2" USA
$29.00 Buy It Now
1 watcherVintage Double Jawed Rotating 360º Head BENCH VISE jaws are 1½' & 2½" wide handy
$49.99 Buy It Now
Brand New Irwin Drill Press Vise Heavy Duty 4 Inch Clamp
$28.95 Buy It Now or Best Offer
ONE 6-jaw 5" Lathe Chuck 125mm Self-Centering 3000rpm Metalworking Clamp Chuck
$165.65 Buy It Now or Best Offer
1PCS 6-jaw 5" Lathe Chuck 125mm Self-Centering 3000rpm Metalworking Clamp Chuck
$165.88 Buy It Now or Best Offer
6Jaw 125mm Lathe Chuck 5" Self-Centering Step Jaws Metal Lathe Tool Accessory
$165.63 Buy It Now or Best Offer
6Jaw 125mm Lathe Chuck 5" Self-Centering Step Jaws Metal Lathe Tool K13-125
$165.64 Buy It Now or Best Offer
6-jaw 5" Lathe Chuck K13-125 Self-Centering 3000rpm Metalworking Clamp Chuck
$165.72 Buy It Now or Best Offer
NEW 6-jaw 5" Lathe Chuck 125mm Self-Centering 3000rpm Metalworking Clamp Chuck
$165.67 Buy It Now or Best Offer
Mini Milling Machine Bench Fixture Cross Slide X Y Table Worktable Drill Vise!$39.00$37.05 Buy It Now or Best Offer
6" Cross Slide Vise Drill Press Vise Anti-slip Milling Machine Bench Mount Clamp$67.00$63.65 Buy It Now or Best Offer
Bench Drill Press Vise Cross Slide Compound X Y Axis Milling Machine Table$39.00$37.05 Buy It Now
1 watcher(QTY 1) 6" Heavy Duty Multi-purpose Rotating Bench Vise Swivel 360 Degree
$74.99$63.74 Buy It Now or Best Offer
4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise$48.50$46.08 Buy It Now or Best Offer
4" Cross Slide Drill Press Vise X-Y Compound Bench Vise Metal Milling Clamping$48.50 Buy It Now or Best Offer
Vintage Craftsman Machinist Vise
$80.00 Buy It Now or Best Offer
3 watchersWilton 450 Bullet Vise With Swivel Base, 4-1/2" Jaws, Opening 8"
$480.00 Buy It Now or Best Offer
4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise$46.08 0 Bids or Best Offer 3d 2h
3" Aluminum Vise Jaws with Magnetic, Rubber Pads Covers 1 Pair
$16.25 Buy It Now or Best OfferMultifunction Worktable Milling Machine,Cross Slide X Y Table Drill Vise Fixture
$39.00$37.05 Buy It Now
Multifunction Worktable Milling Machine Cross Slide X Y Table Drill Vise Fixture$37.05 0 Bids 4d 16h
4" Aluminum Vise Jaws with Magnetic, Rubber Pads Covers 1 Pair
$17.99 Buy It Now or Best Offer
LABLT Bench Vise with Anvil Swivel 5" Locking Base Table Top Clamp Heavy Vice
$44.78 Buy It Now or Best Offer
1 watcherLABLT 5" Bench Vise with Anvil Swivel Locking Base Table Top Clamp Heavy Vice
$44.75 Buy It Now or Best Offer
Wilton Vise 5” Jaws Replacement Spindle Retainer Washer W/ Screws 500,1780, 2080
$34.00 Buy It Now
Wilton Pow-R-Arm 301 Mechanical Work Positioner Vise Mount Crown Nut 2010830
$69.00 Buy It Now or Best Offer
Vintage Pony Bench Vise 3 1/2' Jaw Anvil Pipe Clamp Rotating Base #23530
$54.56 0 Bids or Buy It Now 4d 12h
Panavise 301 2-1/2" Light Duty Multi-Angle Vise With Stationary Base USED DUSTY
$39.99 Buy It Now or Best Offer
Vintage Chas Parker C. Parker Meriden Ct No. 203 Bench Vise W/ Swivel 1910 Pat.
$189.99 Buy It Now
Metal Milling 2 way X-Y Drill Press Vise Cross Slide Vise Drill Press 4inch
$89.99 Buy It Now
Vintage Pony Bench Vise 3 1/2' Jaw Anvil Pipe Clamp Rotating Base #23530
$150.00 Buy It Now or Best Offer
4" Cross Drill Press Vise 2 Way X-Y Slide Metal Milling Clamp Machine Heavy Duty$48.50$46.08 Buy It Now or Best Offer
Mini Milling Machine Bench Fixture Cross Slide X Y Table Worktable Drill Vise!
$39.00$37.05 Buy It Now or Best OfferMini Milling Machine Bench Fixture Cross Slide X Y Table Worktable Drill Vise!
$39.00$37.05 Buy It Now or Best Offer
4" Cross Drill Press Vise Slide Metal Milling EDM 2 Way X- Y Clamp Machine Black$48.50$46.08 Buy It Now or Best Offer
4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Clamping Vise Heavy Duty$48.50$46.08 Buy It Now
Working Vintage Scout 3 1/2" Bench Vise Swivel 13-633 1/2 Anvil Pipe Vice Red
$29.95 Buy It Now
Wilton 63187 5" Bench Vise, High Visibility with Swivel Base
$360.84 Buy It Now
General Purpose Bench Vise, 4" Jaw Width, 3" Max Opening (11104)
$105.62 Buy It Now
4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black$48.50$46.08 Buy It Now or Best Offer- Cross Slide Vise 4" inch Wide Drill Press X - Y Clamp Milling Heavy Duty 2 Way$48.50 Buy It Now or Best Offer
4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black$48.50$46.08 Buy It Now
Milling Clamping 4" Cross Slide Drill Press Vise X-Y Compound Bench Vise Metal$48.52$46.09 Buy It Now
4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black
$48.50 Buy It Now
4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise$48.50$46.08 Buy It Now or Best Offer
6 inch Slide Drill Press Vice Meta Milling Heavy Duty Cross Vise Clamp Machine
$67.01$63.66 Buy It Now or Best Offer
Multifunction Worktable Milling Machine Cross Slide X Y Table Drill Vise Fixture
$39.00$37.05 Buy It Now or Best Offer
Work Table X Y Axis Bench Drill Press Vise Cross Slide Fixture Milling Machine$39.00$37.05 Buy It Now
Heavy Duty Cross Slide Drill Press X- Y Compound Vise Bench Metal Milling 4" NEW$48.50$46.08 Buy It Now
2 watchersLABLT 4Inch Multipurpose 360-Degree Vise Bench Vise Heavy Duty Multi-Jaw Vise
$61.85 Buy It Now or Best Offer
1 watcherLABLT 4 inch Multipurpose Vise Bench Vise Heavy Duty Multi-Jaw Vise 360-Degree
$61.80 Buy It Now or Best Offer
WORKPRO Bench Vise, 4-1/2" Vice for Workbench, Utility Combination Pipe Home Vis
$61.87 Buy It Now
Clamp Bed Vise Labor-saving Carving Mini Bench Clamp Jewelry Diy Tools Anti-rust
$8.52 Buy It Now
Vintage Small Portable Vacu Vise by General 4" tall x 4 1/4" Wide Base USA
$16.50 Buy It Now or Best Offer
4 Inch Cross Slide Drill Press Vise Heavy Duty Benchtop Compound Cross Slide
$108.64 Buy It Now
Table Flat Vise Multifunctional Drilling Fixed Table Vise Machine Tools Compact
$8.52 Buy It NowMini Milling Machine Bench Fixture Cross Slide X Y Table Worktable Drill Vise!
$39.00$37.05 Buy It Now or Best Offer- Cross Slide Vise 4" inch Wide Drill Press X - Y Clamp Milling Heavy Duty 2 Way$48.50 Buy It Now or Best Offer
1 watcherChas Parker 3” Jaws Vise No. 973 with Swivel Base & Lock Wrench
$250.00 Buy It Now or Best Offer
1PCS NEW MT2 Shank to B16 Adapter Taper Arbor Drill Sleeve
$6.24 Buy It Now or Best Offer
Mini Milling Machine Bench Fixture Cross Slide X Y Table Worktable Drill Vise!$39.00$37.05 Buy It Now or Best Offer
4" Cross Slide Drill press vise Metal Milling Heavy Duty Clamp Machine 2 Way X-Y$48.50$46.08 Buy It Now
4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise$48.50 Buy It Now or Best Offer- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black
$48.50$46.08 Buy It Now or Best Offer Multifunction Worktable Milling Machine,Cross Slide X Y Table Drill Vise Fixture
$39.00$37.05 Buy It Now or Best Offer- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black
$48.50$46.08 Buy It Now or Best Offer - Heavy Duty Cross Slide Drill Press X- Y Compound Vise Bench Metal Milling 4" NEW
$48.50$46.08 Buy It Now 
6 Inch Multi-purpose Rotating Bench Vise Swival Heavy Duty 360 Degree
$95.50 Buy It Now or Best Offer
1 watcherMulti-Purpose Rotating Bench Vise 6inch 360 Degree Heavy Duty
$95.50 Buy It Now or Best Offer
6 Inch Multi-purpose Rotating Bench Vise Swival Heavy Duty 360 Degree
$95.50 Buy It Now or Best Offer
Multi-Purpose Rotating Bench Vise 6inch 360 Degree Heavy Duty
$95.50 Buy It Now or Best Offer
Worktable Mini Precision Vise Fixture Sliding Table Bench Drill Milling Machine$39.00$37.05 Buy It Now
PanaVise Multi-Angle Vise - Screw Mount Table Bench Vise - 3" Wide Jaw Opening
$29.00 Buy It Now or Best OfferMini Milling Machine Bench Fixture Cross Slide X Y Table Worktable Drill Vise US
$39.00$37.05 Buy It Now or Best Offer
3901-2703 3" Super Cross Slide Vise
$165.40 Buy It Now
1 watcherWilton C2 Vise Combo Pipe And Bench Swivel Usa Made Local Pickup Only Ohio
$949.99 Buy It Now
Clamp Bed Vise Labor-saving Carving Clamping Bed Drill Press Vice Table Plier
$8.52 Buy It Now
PALMGREN 6 IN Combination Vise 9629746
$299.82 Buy It Now or Best Offer
6 watchersVintage Wilton 1760 Tradesman Bullet Vise 6" Swivel Base 66 lbs
$399.95 Buy It Now
jewelry vise USSR, high quality. MTZ$34.00 Buy It Now or Best Offer
Mini Bench Vise High Hardness Drilling Fixed Table Vise Machine Tools Heavy Duty
$8.52 Buy It Now
Mini Bench Clamp Small Carving Bench Vise Watch Repair Tool Wear-resistant
$8.65 Buy It Now
Mini Bench Clamp Labor-saving Carving Fixed Table Vise Machine Tools Compact
$8.52 Buy It Now
Clamp Bed Vise Small Drilling Fixed Table Vise Machine Tools Heavy Duty
$8.52 Buy It Now
Clamp Bed Vise High Hardness Drilling Bench Vise Watch Repair Tool Anti-rust
$8.65 Buy It Now
Clamp Bed Vise Multifunctional Carving Bench Vise Watch Repair Tool Compact Size
$8.52 Buy It Now
- Mini Bench Vise Small Carving Clamping Bed Drill Press Vice Table Plier - 1 x Bench Vise. Mini Calculator Comfortable Sturdy Student Mini Pocket Calculator Auxiliary. Purpose: Maintenance and Fixation Features: Small, High Hardness, Adjustable Clamping Range. It is suitable for woodworking carving, drill hole, small object grinding, etc.
- Clamp Bed Vise Multifunctional Carving Mini Flat Plier Bench Clamp Heavy Duty - 1 x Bench Vise. 1 Set Window Door Lock Stable Protect T-shaped Anti-theft Lock Wear-resistant. It is suitable for woodworking carving, drill hole, small object grinding, etc. 10pcs 6700-2rs Bearing Thin Section Easy to Install Sturdy Thin Section High.
- Clamp Bed Vise Small Drilling Mini Bench Clamp Jewelry Diy Tools Anti-rust - J4016 Tapping Chuck Sturdy Easy to Install Specialized Hss Milling Connect Chuck. 1 x Bench Vise. Cutter Grinder Compact Structure Pinpoint Grinding Professional Cutter Sharping. It is suitable for woodworking carving, drill hole, small object grinding, etc.
- Clamp Bed Vise High Hardness Carving Fixed Table Vise Machine Tools Anti-rust - 280pcs M3-m12 Gaskets Hollow Clear Assorted Torx Locking Washers Good Hardness. 1 x Bench Vise. Wiper Blade Easy to Use Universal Multifunctional Wiper Blade Black. It is suitable for woodworking carving, drill hole, small object grinding, etc.
- Mini Bench Clamp Multifunctional Carving Bench Vise Watch Repair Tool Heavy Duty - 1 x Bench Vise. Adhesive Ptfe Tape High Temperature Resistance Excellent Quality 3. Adhesive Ptfe Tape High Temperature Resistance Excellent Quality 2. Adhesive Ptfe Tape High Temperature Resistance Excellent Quality 1.
- Mini Bench Clamp Labor-saving Carving Mini Flat Plier Bench Clamp Wear-resistant - 1 x Bench Vise. It is suitable for woodworking carving, drill hole, small object grinding, etc. 6pcs Mini Screwdriver Set Small Sturdy Assorted Mini Screwdrivers Good Hardness. Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
- Mini Bench Clamp Adjustable Clamping Range Carving Fixed Table Vise Machine - 1 x Bench Vise. 10pcs/13pcs M35 Bits Standard Versatile Professional Twist Dri Professional13pcs. Siphon Pump Hand Manual Portable Oil Liquid Syphon Transfer Pump Multifunctional. Purpose: Maintenance and Fixation Features: Small, High Hardness, Adjustable Clamping Range.
- Mini Bench Clamp Labor-saving Drilling Mini Bench Clamp Jewelry Diy Tools - 1 x Bench Vise. It is suitable for woodworking carving, drill hole, small object grinding, etc. Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
- Mini Flat Clamp Adjustable Clamping Range Drilling Clamping Bed Drill Press Vice - 210pcs M2-m10 Embedded Nuts Small Uniform Teeth Female Knurled Nut Set Abrasion. 1 x Bench Vise. Paper Clip Dispenser Creative Multifunctional Table Decor Paper Clip Holder Abs. Purpose: Maintenance and Fixation Features: Small, High Hardness, Adjustable Clamping Range.
- Mini Bench Clamp High Hardness Carving Clamping Bed Drill Press Vice Table Plier - 1 x Bench Vise. Purpose: Maintenance and Fixation Features: Small, High Hardness, Adjustable Clamping Range. It is suitable for woodworking carving, drill hole, small object grinding, etc. Ice Crusher Eco-friendly Anti-slip Pad Manual Hand Cranked Ice Crusher 2 Colors.
- Table Flat Vise Multifunctional Carving Bench Vise Watch Repair Tool Anti-rust - 1 x Bench Vise. 6707-2rs Bearing Smooth Low Friction Thin Section Deep Groove Ball Bearing. Toothpick Holder Lustrous Automatic Convenient Dining Table Press Toothpick. It is suitable for woodworking carving, drill hole, small object grinding, etc.
- Mini Bench Vise High Hardness Carving Mini Flat Plier Bench Clamp - 10pcs Heat Shrink Film High Toughness Easy Installation Transparent Remote. 1 x Bench Vise. Storage Box Folding Portable Portable Lightweight Cool Appearance Cooler Box. It is suitable for woodworking carving, drill hole, small object grinding, etc.
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Clamp Bed Vise Labor-saving Carving Mini Flat Plier Bench Clamp Heavy Duty - 1 x Bench Vise. 366pcs Scrapbook Paper Mini Eco-friendly Diy Scrapbooking Retro Material Paper. It is suitable for woodworking carving, drill hole, small object grinding, etc. 6707-2rs Sealed Ball Bearing Smooth Easy to Use Self-lubricated Deep Groove Ball.
- Clamp Bed Vise Small Drilling Mini Flat Plier Bench Clamp Anti-rust - 1 x Bench Vise. 1 Set Neon Index Cards Versatile Writing Smoothly Neon Index Writing Cards Pap 4. 1 Set Neon Index Cards Versatile Writing Smoothly Neon Index Writing Cards Pap 6. 1 Set Neon Index Cards Versatile Writing Smoothly Neon Index Writing Cards Pap 5.
- Sanou NEW 4 Jaw K02-63 2.5" 63mm M14 Reversable Self-Centering Jaws Lathe Chuck
- 1PCS Mini 4 Jaw K02-63 2.5" 63mm M14 Reversable Self-Centering Jaws Lathe Chuck
- 80mm 3" 3 Jaw Mini Lathe Chuck Self Centering Reversable Jaws K01-80B
- Sanou 4 Jaw K02-50 2" 50mm M14 Reversable Self-Centering Jaws Lathe Chuck NEW - (Excluded.).
- NEW 4" 3 Jaw K01-100B 100mm Z-D 3XM6 Lathe Chuck Self Centering Reversable Jaws
- Sanou Mini K02-50 4 Jaw 2" 50mm M14 Reversable Self-Centering Jaws Lathe Chuck
- 1PCS NEW K01-80B 80mm 3" 3 Jaw Mini Lathe Chuck Self Centering Reversable Jaws
- 1PCS 4" 3 Jaw K01-100B 100mm Z-D 3XM6 Lathe Chuck Self Centering Reversable Jaws - (Excluded.).
- 4" Cross Slide Drill Press Vise 2 Way X-Y Vise Bench Metal Milling Heavy Duty - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Work Table X Y Axis Bench Drill Press Vise Cross Slide Fixture Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Palmgren Combination Bench & pipe vise, 5", 9629745 - Damaged box item new
- Compound Mini Milling Machine Worktable X Y Cross Slide Bench Drill Vise Fixture - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Heavy Duty Cross Slide Drill Press X- Y Compound Vise Bench Metal Milling 4" NEW - Package Included 1* Cross Slide Vise All Accessories Needed for Installation Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Multifunction Worktable Milling Machine,Cross Slide X Y Table Drill Vise Fixture - This milling machine table is made of high-quality aluminum alloy, which is strong and durable. The Table Is Not Only Suitable for Miniature Table Drill and Drill Stand Series, but Also Other Suitable Machine Tools.
- 2.5" x 3-3/8" Vise High Precision .0002" Hardened and Ground - Feature： Jaw width: 2-1/2" Jaw opening: 3-3/8" Jaw depth: 1-1/4" Vise length: 7-1/4" V-groove allows for holding of square and round parts, vertically and horizontally Square and parallel within .0002" (tolerance on handbook is metric) One-piece body construction Hardened and ground Rc 58-62 Precision ground on the front end, rear end, both sides, top and bottom All internal areas precision ground to insure constant accuracy Description： The Product Has Passed Strict Quality Testing Durable And Easy To Install And Replace Cost-effective, Good After-sales Service.
- Labwork Manual Flat Pliers 2-1/2" x 3-3/8" Vise High Precision 0.0002 Hardened - Description： -Jaw Width: 2-1/2" -Jaw Opening: 3-3/8" -Jaw Depth: 1-1/4" -Vise Length: 7-1/4" -V-Groove Allows For Holding Of Square And Round Parts, Vertically And Horizontally -Square And Parallel Within .0002" (Tolerance On Handbook Is Metric) -One-Piece Body Construction -Hardened And Ground RC 58-62 -Precision Ground On The Front End, Rear End, Both Sides, Top And Bottom -All Internal Areas Precision Ground To Insure Constant Accuracy Package Include： 1*Manual Flat Pliers W/o Product Instruction Notes：.
- Findmall New Manual Flat Pliers 2-1/2 x 3-3/8" Vise High Precision 0.0002 - Specification： Jaw width: 2-1/2" Jaw opening: 3-3/8" Jaw depth: 1-1/4" Vise length: 7-1/4" V-groove allows for holding of square and round parts, vertically and horizontally Square and parallel within .0002" (tolerance on handbook is metric) One-piece body construction Hardened and ground Rc 58-62 Precision ground on the front end, rear end, both sides, top and bottom All internal areas precision ground to insure constant accuracy Package Including： Findmall New Manual Flat Pliers 2-1/2 x 3-3/8" Vise High Precision 0.0002 Notes：.
- New Manual Flat Pliers 2-1/2 x 3-3/8" Vise High Precision 0.0002 - Product features Jaw width: 2-1/2" Jaw opening: 3-3/8" Jaw depth: 1-1/4" Vise length: 7-1/4" V-groove allows for holding of square and round parts, vertically and horizontally Square and parallel within .0002" (tolerance on handbook is metric) One-piece body construction Hardened and ground Rc 58-62 Precision ground on the front end, rear end, both sides, top and bottom All internal areas precision ground to insure constant accuracy Brand happy19star MPN HP29847 UPC Does not apply.
- New Manual Flat Pliers 2-1/2 x 3-3/8" Vise High Precision 0.0002 - Product features Jaw width: 2-1/2" Jaw opening: 3-3/8" Jaw depth: 1-1/4" Vise length: 7-1/4" V-groove allows for holding of square and round parts, vertically and horizontally Square and parallel within .0002" (tolerance on handbook is metric) One-piece body construction Hardened and ground Rc 58-62 Precision ground on the front end, rear end, both sides, top and bottom All internal areas precision ground to insure constant accuracy Brand labwork MPN LAW59694 UPC Does not apply.
- New Vise 2-1/2 x 3-3/8" Vise High Precision .0002" Hardened and Ground - Product features Jaw width: 2-1/2" Jaw opening: 3-3/8" Jaw depth: 1-1/4" Vise length: 7-1/4" V-groove allows for holding of square and round parts, vertically and horizontally Square and parallel within .0002" (tolerance on handbook is mtric) One-piece body construction Hardened and ground Rc 58-62 Precision ground on the front end, rear end, both sides, top and bottom All internal areas precision ground to insure constant accuracy Brand greatparts MPN GRE49745 UPC Does not apply.
- Clamp Bed Vise Labor-saving Carving Bench Vise Watch Repair Tool Anti-rust - 1 x Bench Vise. Self-priming Water Pump Portable Powerful 12v 60w Micro Diaphragm Pump Abs. Live Center Anti-static Long Service Life High Precision Edge Finder Touch Point. It is suitable for woodworking carving, drill hole, small object grinding, etc.
- Mini Bench Clamp Labor-saving Drilling Mini Flat Plier Bench Clamp Anti-rust - 750g 0.6-1.2mm Soldering Wire High Insulation Resistance Bright Solder Poi 0.8mm. 750g 0.6-1.2mm Soldering Wire High Insulation Resistance Bright Solder Point 1mm. 750g 0.6-1.2mm Soldering Wire High Insulation Resistance Bright Solder Poi 1.2mm.
- Mini Bench Vise Labor-saving Drilling Mini Flat Plier Bench Clamp Wear-resistant - 1 x Bench Vise. It is suitable for woodworking carving, drill hole, small object grinding, etc. Due to the light and screen setting difference, the item's color may be slightly different from the pictures.
- Clamp Bed Vise Small Carving Fixed Table Vise Machine Tools Anti-rust - 1 x Bench Vise. 6pcs Writing Marker Pen Anti-fade Soft Tip Double Tip Dual Color Writing Marker. It is suitable for woodworking carving, drill hole, small object grinding, etc. Writing Pen Sharpening-free Smooth Writing Free Cutting Pencil Wear-resist Green.
- Mini Bench Clamp Labor-saving Carving Fixed Table Vise Machine Tools Heavy Duty - 1 x Bench Vise. 10pcs 6800-2rs Steel Bearings High-strength Double Sealed Deep Groove Double. 10pcs 6800-2rs Steel Bearings Smooth Double Sealed Rubber Sealed Deep Groove. It is suitable for woodworking carving, drill hole, small object grinding, etc.
- Clamp Bed Vise High Hardness Carving Bench Vise Watch Repair Tool Compact Size - 1 x Bench Vise. It is suitable for woodworking carving, drill hole, small object grinding, etc. 10pcs 6800-2rs Steel Bearings Smooth Double Sealed Rubber Sealed Deep Groove. 10pcs 6800-2rs Steel Bearings High-strength Double Sealed Deep Groove Double.
- Mini Bench Clamp High Hardness Carving Mini Flat Plier Bench Clamp Compact Size - 1 x Bench Vise. 131pcs M6 Head Cap Screw Precise Thread Non-slip Head Cap Bolts Nuts Kit. It is suitable for woodworking carving, drill hole, small object grinding, etc. Moulding Cutter Wear-resistant Heat Resistance 6-blade Tenon 12mmhandlex65x7.5mm.
- Table Flat Vise Labor-saving Carving Mini Flat Plier Bench Clamp Heavy Duty - 1 x Bench Vise. It is suitable for woodworking carving, drill hole, small object grinding, etc. 5pcs Scoop Practical Scratch-resistant Baby Wooden Scoop Eco-friendly. 10pcs 6809-2rs Groove Bearing High Performance Low Noise Premium Deep Groove.
- Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Vice
- 4"Cross Slide Vise Drill Press Metal Milling 2 Way X- Y Heavy Duty Clamp Machine - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Cross Slide Vise 4" inch Wide Drill Press X - Y Clamp Milling Heavy Duty 2 Way - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key FeaturesHigh-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- Vintage 4-1/8" Jaws Bench Swivel Vise - 4-1/8" Long. Removable jaws. Has a small anvil area. Vise opens up about 2-1/4" Wide, from jaw to jaw.Swivel works and locks. Vise is in ACCEPTABLE, PRE-OWNED, WORKING condition. Removable jaws have heavy wear, and chipping mainly located on the edges.
- Vintage 3-5/8" ELGIN no 50 Bench Vise, Made in USA - 3-5/8" Long. NON-removable jaws. Has a small anvil area and also pipe jaws. Vise opens up about 2-1/4" Wide, from jaw to jaw. Stationary vise will need bolts hardware to attach to workbench- not included.
- Vintage 3-5/8" Home Swivel Bench Vise 203 1/2, Made in Japan - 3-5/8" Long. Removable jaws. Has a small anvil area and also pipe jaws. Vise opens up about 2-5/8" Wide, from jaw to jaw. Swivel works and locks. Vise is in GOOD, PRE-OWNED, WORKING condition. Removable jaws are in okay shape.
- Vintage Vise Cast Iron 4" Jaw Mill Machinist Vice No.4 Drill Press Bench Mount - Unknown maker. 4-1/8" Long. Removable jaws. Vise opens up about 3-1/8" Wide, from jaw to jaw. Vise is in GOOD, PRE-OWNED, WORKING condition. Jaws open and close as they should. See pictures for details and condition.
- 4“ Multipurpose Vise Bench Vise Heavy Duty Multi-Jaw Vise 360-Degree - Description: Multipurpose Vise 4“ Bench Vise 360-Degree Rotation Clamp on Vise with Swivel Base and Head Heavy Duty Multi-Jaw Vise Swivel Multipurpose Bench Vise A 4-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It features with swivel head and base and can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features Durable Material.
- 4“ Multipurpose 360-Degree Vise Bench Vise Heavy Duty Multi-Jaw Vise - Product Description These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face. This vise features a jaw opening scale and rotation scale. The jaw opening scale is used to approximate the jaw opening size while the rotation scale provides approximate angle readings through 180-degrees. Features Rotating jaws Rotating base Jaw opening scale Rotation scale Base locking lever .
- Cross Plain ViseTwo Way Moving ViseDrilling and Milling WorkbenchBench Vise
- Wilton Steel Swivel Bench Vise Clamp 140101 4" Jaw Width CBV-100 - Used - Unit is in used condition and is power on tested. VITEK VT-EH8 8 Channel Digital Video Recorder - Used, Good Condition. DoesNOT include any other accessories not listed or pictured above.
- New - Westward 54ZV76 Rotating Multi-Jaw 6-inch Bench Vise
- Wilton General Purpose Bench Vise, 4" Jaw Width, 3" Max Opening (11104) - The Wilton 11104 Bench Vise boasts a 4" jaw width, double lockdowns, and large anvil. SECURE GRIP: Hardened steel replaceable jaw inserts are machine serrated for a safe and secure grip under maximum torque.
- Vintage Unbranded 2 1/2" Machinist Drill Press Vise - Vintage Unbranded 2 1/2" Machinist Drill Press Vise. Minor wear from use, good used working condition
- 4“ Multipurpose Vise Bench Vise 360-Degree Rotation Clamp on Vise - Multipurpose Vise 4“ Bench Vise 360-Degree Rotation Clamp on Vise with Swivel Base and Head Heavy Duty Multi-Jaw Vise Swivel Multipurpose Bench Vise A 4-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It features with swivel head and base and can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features Durable Material.
- Vintage Wilton Angle Tilt 4" Gunsmith Machinist Vise - This vintage Wilton vise is a great addition to any workshop. With its angle tilt and 4 inch jaws and 8" opening, it's perfect for machinist, woodworking and gunsmithing projects. Made in the United States, this vintage original is a rare find for collectors and enthusiasts alike. The brand Wilton is known for their quality tools, making this vise a reliable choice for any project. Whether you're a machinist, gunsmith or a carpenter, this vise will hold your workpieces securely in place. Get your hands on this piece of history and add it to your collection today. Missing one jaw. Minor rust. Minor wear and scratches from use.
- Vintage 4 Inch Swivel Vise Patina Double Lock Down Handles Pipe Heavy Big Vice - There is a swivel lock down handle on each side of the vise.
- 3900-2703 3" Heavy Duty Cross Slide Vise, Metric Dial - Secures firmly on drill press table and moves similar to a vertical mill. Accurate positioning in two directions (crossed). Ball crank handles are solid and balanced. High grade cast body. Heat treated steel jaws.
- Vintage Mechanics Vise Wilton 745 5” Made in USA 1977 Original Paint - Vintage vise in working order . Original paint . Pipe jaws are cracked as shown in picture. Please see pictures for description
- QGG 73/3" Machine Vise Manual Vise Bench Vise CNC Vise Grinding Machine Tool - Model: QGG73/3". G.W: 5.3kg size:20.5 7cm. N.W: 5.2kg. pe rpendicularit: 0.005mm. Pa rallelism : 0.005mm/100mm.
- Vintage Bench Vise Bench Clamp Machinist Vise 1-1/2" Jaw Made In Korea - VINTAGE BENCH VISE BENCH CLAMP MACHINIST VISE 1-1/2" JAW MADE IN KOREA
- Vintage Ridgid Model: B-Y-2-A Bench Pipe Vise ~ 2-1/2" Elyria, Ohio USA - Only includes what is shown in photos. See photos for condition.
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Work Table X Y Axis Bench Drill Press Vise Cross Slide Fixture Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- 6" Precision Cross Drill Press Vise Slide Metal Milling 2 Way X-Y Clamp Machine - This 6" vise clamp machine will easily turn your drill press into a milling machine! 1 Vise Clamp Machine. Jaw Depth: 4cm/ 2in. Jaw Width: 15.3cm/ 6in. Applicable Objects: Water Pump, Pipe, Steel Wire, Clamp Table.
- VINTAGE WILTON SWIVEL BENCH MOUNT VISE 4" WIDE 3.75" OPENING No 121069 No Handle - VINTAGE WILTON SWIVEL BENCH MOUNT VISE 4" WIDE 3.75" OPENING WITH PIPE JAWS. NO HANDLE
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Cross Slide Drill Press Vise 2 Way X-Y Clamp Slide Metal Mill Heavy Duty Machine - Our Cross Slide Vise Is Suitable for Surface Grinders, Milling Machines, Edm, and Wedm Machines. This Cross Slide Vise Is Made of High-quality Cast Iron, While the Jaws Are Made of Carbon Steel. High-quality Material: Our Cross Slide Vise Is Made of High-quality Cast Iron.
- Vintage Ridgid B-Y-2-A Bench Pipe Vise 1/8"-2 1/2" Pipe USA - Vintage Ridgid B-Y-2-A Bench Pipe Vise 1/8"-2 1/2" Pipe USA ITEM USED, SELLING AS IS PLEASE LOOK CAREFULLY AT ALL PICTURES PROVIDED FOR CONTENTS/CONDITION BEFORE MAKING SELECTION NO APO/FPO ADDRESS PLEASE! ALSO NO SHIPPING TO PUERTO RICO/GUAM OR U.S VIRGIN ISLANDS
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Description Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. The top and bottom cross slide vise with bi-directional movement allows easy machining of high precision and quality wood and metal parts. Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Widened And Raised Accurate Scale Cross Slide Vise With Bi-directional Movement - Installation 1. First, align the hole of the rocker with the screw rod and install the rocker. 2. Tighten the screw cap with a wrench. (The nut should not be tightened too much, but leave a certain gap to ensure the smoothness of the screw.) Package Included 1* Cross Slide Vise All Accessories Needed for Installation Notes Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.
- NEW Table Vice Vacuum Base Clamp Vise Powerful Suction 360° Rotation Adjustable - Description: This handy, go-anywhere vise features a powerful suction mechanism that securely attaches the vise to any smooth, flat surface. The swivel-head can be positioned in just about any configuration and locks in place with a high torque lock-ring. Ideal for hobby use around the home or take it anywhere. Specifications: 360 ° free rotation adjustment Maximum opening size: 70mm Jaw width dimension: 70mm Product size: 15cm * 17cm Net Weight: 1052g Rubber Jaw Pads，Can be adsorbed 360° Swivel Head Powerful Suction Mechanism.
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Vintage Ridgid Model: B-Y-2-A Bench Pipe Vise ~ 2-1/2" Elyria, Ohio USA - Vintage Ridgid Model: B-Y-2-A Bench Pipe Vise ~ 2-1/2" Elyria, Ohio USASee photos Economic shipping
- Multifunction Milling Cross Sliding Table Vise for Lathe Bench Drill - 1 Worktable. The table is suitable for Mini Drill and drill bracket series. The work table is composed of several adjustable dovetail slot. The working table with three T shaped groove, standard size is.
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4 inch Cross Slide Vise Wide Drill Press 2 Way X-Y Clamp Milling Heavy Duty 10cm - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X/Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- PALMGREN MACHINIST VISE No.090 - has Degree ANGLE & SWIVEL Markings - One Side is Stamped "Palmgren. No. 090. Chicago Tool & Eng. Co. Chicago -- Illinois" and the Base has "Palmgren". It Operates Fine. It has No Cracks. This is a PALMGREN No. 090 Angle and Swivel Machinist Vise.
- Vintage Columbian D55-D5 Bench Vise Made in USA
- Vintage (Dunlap?) 3" Clamp On Bench Vise For Jeweler Etc. - Made In Usa! - This is a vintage 3" clamp-on bench vise... I'm not sure who it's made but certainly vintage American made (it has it's original paint)... Fully functional condition, the jaws move well and close square and tight... Perfect for jewelry making etc... I have not even cleaned it up (thought I'd leave that to the buyer)... Please see the (14) pictures for condition... This will ship out fast with USPS...
- 3in Bench Vise Structure Hand Tool With Rotating Handle For Woodworking EJ - The vise can be used with drill stand and bench drill, etc. Feature: 1. Maximum jaw is 2.73in, that is 80mm, and vise specification is 3in, which is very convenient. Item Type: 3in Bench Vise. With durable high-density aluminum alloy structure, the bench vise is very durable and sturdy.
- Westward 10D752 6" Drill Press Vise With Stationary Base - Machine Vise, Tap Locking Lever Can Be Raised or Lowered to Tighten or Loosen Against The Workpiece. Machine Vise. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes.
- ER32 16 mm precision collet for CNC milling lathe tool and spindle motor 1pcs - Model: ER32 - 16 mm. ( 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11 mm, 12mm, 1 3mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 3.175mm ). We also have other size as follow red words.
- MT2 Shank to B16 Adapter Taper Arbor Drill Sleeve w Tang Tailstock CP for - The Morse Taper Sleeve is mainly used in drilling machine and lathe machine. Content : 1 x Reducing Drill Sleeve.
- 4" Heavy Duty Cross Drill Press Vise 2 Way X-Y Slide Metal Milling Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 6" Cross Vise 2 Way Slide Press Milling X-Y Clamp Machine Bench Vise Clamp Table - This 6" vise clamp machine will easily turn your drill press into a milling machine! 1 Vise Clamp Machine. Jaw Depth: 4cm/ 2in. Jaw Width: 15.3cm/ 6in. Applicable Objects: Water Pump, Pipe, Steel Wire, Clamp Table.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 6" Cross Vise 2 Way Slide Press Milling X-Y Clamp Machine Bench Vise Clamp Table - This 6" vise clamp machine will easily turn your drill press into a milling machine! 1 Vise Clamp Machine. Jaw Depth: 4cm/ 2in. Jaw Width: 15.3cm/ 6in. Applicable Objects: Water Pump, Pipe, Steel Wire, Clamp Table.
- 4" 2 Way X-Y Cross Slide Vise Drill Press Metal Milling Heavy Duty Clamp Machine - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- Palmgren 9612251 2-7/16" Light Duty Machine Vise With - Machine Vise, Drill Press, Jaw Width (In.). 2 7/16 in, Jaw Opening (In.). 3 in, Throat Depth (In.). 1 1/2 in, Overall Length (In.). 7-1/2, Overall Height (In.). 2-9/16, Clamping Force (Lb.). -, Jaw Deflection. 0.002 in At 2000 lbs, Jaw Plate 0.002 in, Bed/Base 0.001 in, Can Be Used On Base, Sides or End.
- Work Table Cross Slide Bench Drill Press Vise X-Y 2 Axis Milling Machine Fixture - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- 3in Bench Vise Structure Hand Tool With Rotating Handle For Woodworking BL - The vise can be used with drill stand and bench drill, etc. Feature: 1. Maximum jaw is 2.73in, that is 80mm, and vise specification is 3in, which is very convenient. Item Type: 3in Bench Vise. With durable high-density aluminum alloy structure, the bench vise is very durable and sturdy.
- Dayton 31Lz66 4" Machine Vise With Fixed Base - Machine Vise, Uni-Grip, Fixed Base, Jaw Width (In.). 4 3/4 in, Jaw Opening (In.). 4 1/2 in, Throat Depth (In.). 1 1/2 in, Overall Length (In.). 13-1/2, Overall Height (In.). 2-1/2, Clamping Force (Lb.).
- Dayton 4Cpf3 4" Machine Vise With Swivel Base - It will hold your pieces in place while you work on them. The swivel base allows you to move the vise into position without having to reposition it or turn it around. With a jaw width of 4", this bench vise has a max opening of 4".
- 4" Heavy Duty Cross Drill Press Vise 2-Way X-Y Slide Metal Milling Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Cross Slide Drill Press Vise 2 Way X-Y Clamp Slide Metal Mill Heavy Duty Machine - Our Cross Slide Vise Is Suitable for Surface Grinders, Milling Machines, Edm, and Wedm Machines. This Cross Slide Vise Is Made of High-quality Cast Iron, While the Jaws Are Made of Carbon Steel. High-quality Material: Our Cross Slide Vise Is Made of High-quality Cast Iron.
- Cross Slide Drill Press Vise 2 Way X-Y Clamp Slide Metal Mill Heavy Duty Machine - Our Cross Slide Vise Is Suitable for Surface Grinders, Milling Machines, Edm, and Wedm Machines. This Cross Slide Vise Is Made of High-quality Cast Iron, While the Jaws Are Made of Carbon Steel. High-quality Material: Our Cross Slide Vise Is Made of High-quality Cast Iron.
- Craftsman 3-1/2" Swivel Base Pipe Jaw & Anvil Bench Vise 45264 USA
- SEARS 3-1/2" Swivel Base Pipe Jaw & Anvil Bench Vise - EXCELLENT WORKING CONDITION - PIPE JAW HAS MINOR CHIPPING STILL WORKS GREAT.
- 4" Heavy Duty Cross Drill Press Vise 2 Way X-Y Slide Metal Milling Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Heavy Duty Cross Drill Press Vise 2 Way X-Y Slide Metal Milling Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Vintage Small Portable Vacu Vise by General 4" tall x 4 1/4" Wide Base USA - Vintage Small Portable Vacu Vise by General 4" tall x 4 1/4" Wide Base USA
- Panavise 366 Wide Opening Head Clamp For Parts - It can unexepectedly shift in the flat areas. This unit will arrive in the condition shown. It is being sold AS-IS and WITHOUT WARRANTY. ALWAYS HERE TO HELP. A signed credit card authorization form is required for all orders paid with credit card.
- Vintage (Dunlap?) 2-1/2" Clamp On Bench Vise For Jeweler Etc. - Made In Usa! - This is a vintage 2-1/2" clamp-on bench vise... Pretty sure it's made by Dunlap but the logo is mostly missing (it has it's original paint)... Fully functional condition, the jaws move well and close square and tight... Perfect for jewelry making etc... I have not even cleaned it up (thought I'd leave that to the buyer)... Please see the (14) pictures for condition... This will ship out fast with USPS...
- Wilton Vise 3” Jaws Replacement Spindle Retainer Washer - Came off 9300 bullet vise in good shape ready to be used
- VINTAGE WILTON 3” BULLET VISE 9300 - Vise Dynamic Jaw Only - 9300 vise jaw no visible cracks or welds
- Dayton 4Cpf1 4" Machine Vise With Swivel Base - Machine Vise, 2-Way Angular, Swivel Base, Jaw Width (In.). 4 in, Jaw Opening (In.). 4 in, Throat Depth (In.). 1 1/2 in, Overall Length (In.). 14.57, Overall Height (In.). 5.43, Clamping Force (Lb.). -, Jaw Deflection 0.006 in Per 4 in At 33 lb Load On Hand Crank, Jaw Plate Square To 0.0012 in per 4 in, Bed/Base Parallel To 0.0012 in, Hold Down Slot for Secure Clamping, Rotation Along 0 Degrees to 90 Degrees Vertical Scale, Rotation Along 360 Degrees Swivel Base.
- Westward 10D722 7" Standard Duty Woodworking Vise With Stationary Base - Zoro Select M01000.300.0280 Class 8.8, M30-3.50 Hex Head Cap Screw, Black Oxide. Zoro Select M07400.120.0110 M12-1.75 Socket Head Cap Screw, Black Oxide Steel. & Recepticles. Electrical Outlets. Light Industrial.
- Columbian Clamp On 3" Bench Vise 33150
- Older Panavise With Rubber Jaw Faces And Iron Base Pana Vise - THE VISE HAS SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES. NO WARRANTIES GIVEN OR IMPLIED.
- Vintage Chas Parker C. Parker Meriden Ct No. 973 Bench Vise W/ Swivel Base - THE JAWS OPEN AND CLOSE FINE. THERE ARE SCUFFS, SCRATCHES AND WEAR FROM USE. LOOK AT THE PICTURES. NO WARRANTIES GIVEN OR IMPLIED. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION.
- Wilton 1765 Tradesman Bench Vise, 6-1/2" Jaw Width, 6" Max Jaw Opening, 4"... - The Tradesman round channel vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut The tradesman round channel vise nut is anchored at the rear which provides straight line pull and even pressure resulting in greater durability.
- 1PCS NEW Sanou 3" 3 Jaw Lathe Chuck K11-80 Self Centering M6 Inside Outside Jaws - (Excluded.).
- Sanou 4 Jaw K02-50 2" 50mm M14 Reversable Self-Centering Jaws Lathe Chuck NEW - (Excluded.).
- Sanou NEW 4 Jaw K02-63 2.5" 63mm M14 Reversable Self-Centering Jaws Lathe Chuck
- 1PCS NEW K01-80B 80mm 3" 3 Jaw Mini Lathe Chuck Self Centering Reversable Jaws
- 1PCS 4" 3 Jaw K01-100B 100mm Z-D 3XM6 Lathe Chuck Self Centering Reversable Jaws - (Excluded.).
- RIDGID BC410 (40195) Top Screw Bench Chain Vise, 1/8" to 4" Capacity - Up for consideration is one new open box RIDGID BC410 (40195) Top Screw Bench Chain Vise, 1/8" to 4" Capacity. Please check out pictures and ask questions. See our other eBay store items for sale. Follow and like us on eBay.Tools 11/23
- Wilton 4.5" PowRscrew Vise - Very Rare Version - Original Paint & Unrestored - Wilton 4.5" PowRscrew vise manual over hydraulicVery rare version with special locking festure i believe. Condition shown in pictures and works as it should.
- Vintage STANLEY 3'' Machinist Vise No. 993 Cast Iron Vice w/ Custom Steel Base - Vise in VG Cond.
- 4inch Cross Slide Drill Press X- Y Compound Vise Bench Metal Milling Heavy Duty - Description Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. The top and bottom cross slide vise with bi-directional movement allows easy machining of high precision and quality wood and metal parts. Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Cross Slide Vise 4" Wide Drill Press X - Y Clamp Milling Heavy Duty 2 Way Black - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Vice US - Feature: Serrate steel jaws. Oversized striking anvil. Heat treated shaft. 3 Down slots. 360° Double locking swivel base. Precision crafted and designed to provide dependable service and satisfaction. Industrial quality. Heavy duty cast steel construction. Hardened and polished replaceable jaws and large anvil. Swivel base allow you to get the angle on your workpiece. Note: COLOR MAY VARY UPC Does not apply Brand Handdo Condition New Warranty 1 year Color Blue Material Alloy Steel MPN 461250 Custom Bundle No Type Bench Vise Size 4 in Jaw Size 4 in.
- Multifunction Worktable Milling Machine,Cross Slide X Y Table Drill Vise Fixture - This milling machine table is made of high-quality aluminum alloy, which is strong and durable. The Table Is Not Only Suitable for Miniature Table Drill and Drill Stand Series, but Also Other Suitable Machine Tools.
- 5in Bench Vise with Anvil Swivel Locking Base Table Top Clamp Heavy Duty Vice US - Feature: Precision crafted and designed to provide dependable service and satisfaction. Industrial quality. Heavy duty cast steel construction. Hardened and polished replaceable jaws and large anvil. Swivel base allow you to get the angle on your workpiece. color may vary. Heavy duty cast steel construction. Hardened and polished replaceable jaws and large anvil. Swivel base allow you to get the angle on your workpiece. Heavy Duty 5" Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Steel. Specification: Serrate steel jaws Oversized striking anvil Heat treated shaft 3 Down slots 360° Double locking swivel base .
- Bench Vise with Anvil Swivel 5inch Locking Base Table Top Clamp Heavy Duty Vice - Feature： Precision crafted and designed to provide dependable service and satisfaction. Industrial quality. Heavy duty cast steel construction. Hardened and polished replaceable jaws and large anvil. Swivel base allow you to get the angle on your workpiece. color may vary. Heavy duty cast steel construction. Hardened and polished replaceable jaws and large anvil. Swivel base allow you to get the angle on your workpiece. Heavy Duty 5" Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Steel. Specification： Serrate steel jaws Oversized striking anvil Heat treated shaft 3 Down slots 360° Double locking swivel base .
- Bench Vise with Anvil Swivel 5in Locking Base Table Top Clamp Heavy Duty Vice US - Feature： Precision crafted and designed to provide dependable service and satisfaction. Industrial quality. Heavy duty cast steel construction. Hardened and polished replaceable jaws and large anvil. Swivel base allow you to get the angle on your workpiece. color may vary. Heavy duty cast steel construction. Hardened and polished replaceable jaws and large anvil. Swivel base allow you to get the angle on your workpiece. Heavy Duty 5" Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Steel. Specification： Serrate steel jaws Oversized striking anvil Heat treated shaft 3 Down slots 360° Double locking swivel base .
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- Work Table X Y Axis Bench Drill Press Vise Cross Slide Fixture Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Clamping Vise Heavy Duty - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Vintage Hollands H 3 1/2" Bench Vise W/Anvil & Pipe Jaw Erie Pa Nice One! - NO LOCKDOWN FOR SWIVEL BASE. NOT ALL BEAT UP. ANVIL AND PIPE JAW. WOULD BENEFIT FROM A CLEANING. HANDLE TRACE BENT. SOLD AS IS AS FOUND. WHAT YOU SEE IS WHAT YOU GET. GOOD LUCK!
- Vintage Wilton Shop King 3 1/2" Swivel Bench Vise W/Anvil & Pipe Jaw Nice One! - NOT ALL BEAT UP. SWIVEL BASE WITH ANVIL AND PIPE JAW. SCHILLER PARK, ILL. SOLD AS IS AS FOUND. WHAT YOU SEE IS WHAT YOU GET. GOOD LUCK!
- 3in Bench Vise Structure Hand Tool With Rotating Handle For Woodworking - The vise can be used with drill stand and bench drill, etc. Feature: 1. Maximum jaw is 2.73in, that is 80mm, and vise specification is 3in, which is very convenient. Item Type: 3in Bench Vise. With durable high-density aluminum alloy structure, the bench vise is very durable and sturdy.
- Westward 10D724 10-1/2" Standard Duty Woodworking Vise With Stationary Base - This Westward 10D724 Standard Duty Woodworking Vise is a quality vise that can be used for any project. The ductile iron body of the vise makes it strong and durable. It has a smooth jaw face, which provides an excellent grip on wood pieces without marring them.
- Cross Slide Vise 4" inch Wide Drill Press X-Y Clamp Milling Heavy Duty 2 Way NEW - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- Mini Milling Machine Bench Fixture Cross Slide X Y Table Worktable Drill Vise! - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Work Table X Y Axis Bench Drill Press Vise Cross Slide Fixture Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Mini Milling Machine Bench Fixture Cross Slide X Y Table Worktable Drill Vise! - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- 4" 2 Way X-Y Cross Slide Vise Drill Press Metal Milling Heavy Duty Clamp Machine - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Work Table X Y Axis Bench Drill Press Vise Cross Slide Fixture Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- Work Table X Y Axis Bench Drill Press Vise Cross Slide Fixture Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Cross Drill Press Vise 2 Way X-Y Clamp Heavy Duty Machine Slide Metal Milling US - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Black 4" Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4 in Cross Slide Drill Press Vise X-Y Compound Bench Vise Metal Milling Clamping - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Vice BASE, VACUUM, HEAD/15.9MM DIA SHAFT, Vice Bench 380 - VICE BASE, VACUUM, HEAD/15.9MM DIA SHAFT Product Range: Panavise Vice Bases Vice Type: Bench.
- Vice HEAD, SELF CENTERING WIDE, 376, Vice Bench 376 - VICE HEAD, SELF CENTERING WIDE, 376 Jaw Width: 38.1mm Jaw Opening Max: 228.6mm Product Range: Panavise Vice Heads Length: 292mm Vice Type: Bench.
- MINI PRECISION Vice, ALU, 50X15X15MM, Vice Bench 302-5600 - MINI PRECISION VICE, ALU, 50X15X15MM SVHC: No SVHC (27-Jun-2018).
- 4" Rotating Bench Vise Swival 360 Degree Cast Iron Multi-purpose New - Multipurpose Vise 4“ Bench Vise 360-Degree Rotation Clamp on Vise with Swivel Base and Head Heavy Duty Multi-Jaw Vise Swivel Multipurpose Bench Vise A 4-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It features with swivel head and base and can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features Durable Material.
- Labwork 4" Rotating Bench Vise Swival 360 Degree Cast Iron Multi-purpose - Fitment： For Machine Tool Processing, Industrial Or Household For Clamping Or Fixing The Workpiece. Description： -Material: Ductile Cast Iron -Jaws Width: 4'' -Jaws Opening: 4'' -Throat Depth: 2'' -Clamping Force: 15kn -Hardness: 46-52HRC Key Features： -Durable Material： -Built By Ductile Cast Iron, The Vise Is More Durable And Hard When In Use. Designed For Long Service Time. -Powerful Clamping Jaws -These Jaws Adjust Well To The Workpieces To Provide Powerful Clamping Pressure While Reducing Marring For Superior Grip. -Swivel Base.
- 4" Multi-purpose Rotating Bench Vise Swival 360 Degree Cast Iron - 4" Multi-purpose Rotating Bench Vise. Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Brand turitrade Jaw Width 4'' Jaws Opening 4'' Throat Depth 2'' MPN Does Not Apply Clamping Force 15Kn UPC Does not apply UPC Does not apply.
- 6" Heavy Duty Steel Bench Vise Anvil Swivel Table Top Clamp Locking Base - Specification： Color: Blue Material: Cast Iron Jaw Width: 6" Description: Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Package Including: 1 x 6" Mechanic Bench Vise.
- 6" Bench Vise with Anvil Swivel Locking Base Table Top Clamp Heavy Duty Steel - Feature： Color: Blue Material: Cast Iron Jaw Width: 6" Description： Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Package List: 1 x 6" Mechanic Bench Vise Notes: Pls check your old picture or model when you order it..
- 6 Inch Heavy Duty Multi-purpose Rotating Bench Vise Swival 360 Degree New - Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" Package including： 6" Multi-purpose Rotating Bench Vise Swival 360 Degree Heavy Duty.
- Labwork 6" Heavy Duty Multi-purpose Rotating Bench Vise Swival 360 Degree - Description： -6" Multi-Purpose Rotating Bench Vise -Parallel Jaws.Head Swival 360 Degree. Full 360 Degree Rotational Jaws. Unique "V" Jaws Provide 4 Point Holding Power. -Width: 6" -Open: 5-1/4" -Throat Depth: 3-1/2" -Pipe Jaws Max. Open : 6-1/4" -"V" Jaws Max. Open: 4" -Anvil Size: 3 x 4" Package Include： 1*6" Multi-Purpose Rotating Bench Vise Swival 360 Degree Heavy Duty W/o Product Instruction Notes： -If You Are Not Sure The Item 100% Fit For Your Vehicle Before Your Purchase..
- 6" Multi-purpose Rotating Bench Vise Swival 360 Degree Heavy Duty - Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" Package including： 6" Multi-purpose Rotating Bench Vise Swival 360 Degree Heavy Duty.
- 6 inch Multi-purpose Rotating Bench Vise Swival 360 Degree Heavy Duty New - Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" Package including： 6" Multi-purpose Rotating Bench Vise Swival 360 Degree Heavy Duty.
- Wilton Reversible Bench Vise w/ Swivel Base 5-1/2" Jaw Width 28821 - Reversible Bench Vise. Jaw Width - 5-1/2". Base Type - Swivel. 155 Center Ct, Venice, FL 34285. Industry Recycles.
- Columbian D44 Swivel-Base Bench Vise - 4 Inch Jaws - Up for sale here is a Columbian D44 Swivel-Base Bench Vise. Columbian D44 Swivel-Base. This is a used vise, but it is still in very good working condition. It opens and closes smoothly, but a bit of lube to the screw wouldn't hurt (I don't have any available or I'd do it myself).
- Cross Slide Vise 4" Wide Drill Press X - Y Clamp Milling Heavy Duty 2 Way Black - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Heavy Duty Cross Drill Press Vise 2 Way X-Y Slide Metal Milling Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Multifunction Worktable Milling Machine,Cross Slide X Y Table Drill Vise Fixture - This milling machine table is made of high-quality aluminum alloy, which is strong and durable. The Table Is Not Only Suitable for Miniature Table Drill and Drill Stand Series, but Also Other Suitable Machine Tools.
- Bench Drill Mini Multifunction Drill Vise Fixture Milling Machine Worktable USA - Milling Machine Worktable Mini Multifunction Drill Vise Fixture For Bench Drill Description The table applies to mini bench drill and drill bracket series. It can also be applied to other suitable machine. The bench is made up of several adjustable dovetail aluminum alloy, We can guarantee a minimum of space and to ensure accuracy. Specifications: Material: Aluminium Alloy Size: 310 * 90mm * 80mm X-Route: 200mm Y-Route: 50mm Distance of grooves: 34mm T-slot size: standard size slot is 15X8X6mm Scale travel: 1.25mm (circle), 0.05mm (one cell) Packing List 1 * Worktable.
- Wilton Vise 6-1/2" Jaw Width Tradesman Hand Tool Cast Iron 60000PSI Ductile Iron - The Tradesman round channel vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the Tradesman round channel vise nut is anchored at the rear which provides straight line pull and even pressure resulting in greater durability.
- Cross Slide Vise 4" inch Wide Drill Press X - Y Clamp Milling Heavy Duty 2 Way - Application This cross slide vise makes it easy to produce high precision and quality wood and metal parts. It is suitable for most milling machines and drilling machines. Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Widened And Raised Accurate Scale Cross Slide Vise With Bi-directional Movement - Installation 1. First, align the hole of the rocker with the screw rod and install the rocker. 2. Tighten the screw cap with a wrench. (The nut should not be tightened too much, but leave a certain gap to ensure the smoothness of the screw.) Package Included 1* Cross Slide Vise All Accessories Needed for Installation Notes Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.
- Mini Milling Machine Bench Fixture Cross Slide X Y Table Worktable Drill Vise! - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Unbranded Cast Iron Bench 2 1/2" Capacity w/Small Anvil Jewelers Gunsmiths LQQK! - 10 Oz, and jaws are 2 1/4" wide. It also has a nice small anvil for delicate work. It opens and tightens just fine and jaws open to over 2 1/2". It has a screw clamp that will attach to any bench or table up to 1 1/2" thick.
- Dayton 4" Steel Jaw Swivel Bench Vise 10" Throat Heavy Duty Mfg. Equipment
- Allied Heavy Duty #4 Bench Vise Swivel 4.25" Steel Jaw 9" Throat Mfg. Equipment
- Bench Drill Press Vise Cross Slide Compound X Y Axis Milling Machine Table - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Panavise 309 Portable Vise,Replaceable,360 Deg. - Multi-Angle Vise, Number of Lock Down Bolts 3, Overall Height 8 in, Overall Length 6 7/8 in, Overall Width 7 1/2 in. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes.
- 40215 BC810 1/2-8" Capacity Top Screw Bench Chain Vise Ridge Tool Company 40215 - MODEL NO. BC810 TOP SCREW BENCH CHAIN VISE, 1/2"-8" PIPE CAPACITY CRANK HANDLE IS ANCHORED TO BASE. RUGGED CAST-IRON BASE HAS HANDY PIPE REST AND BENDER. CAPACITIES OF 1/8" THROUGH 8". TWO MODELS AVAILABLE FOR PLASTIC PIPE. TOOTHLESS JAWS ARE NEOPRENE-COATED TO PREVENT SCORING OF PIPE.
- 4" 2 Way X-Y Cross Slide Vise Drill Press Metal Milling Heavy Duty Clamp Machine - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- 6 inch Multi-purpose Rotating Bench Vise Swival 360 Degree Heavy Duty - Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" UPC Does not apply Brand Yibei-tech Base Motion Type Swivel Jaw Width 6 in Jaw Opening Capacity 5-1/4 in Material Cast Iron MPN YI105511.
- 6 Inch Multi-purpose Heavy Duty Rotating Bench Vise Swival 360 Degree New - Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Specifications: Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" UPC Does not apply Brand netuera Base Motion Type Swivel Jaw Width 6 in Jaw Opening Capacity 5-1/4 in Material Cast Iron MPN 316533 Warranty 1 year Condition New.
- 6" Multi-purpose 360 Degree Heavy Duty Rotating Bench Vise Swival New - Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Specifications: Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" UPC Does not apply Brand LABLT Base Motion Type Swivel Jaw Width 6 in Jaw Opening Capacity 5-1/4 in Material Cast Iron MPN QS241168QR Warranty 1 year Condition New.
- 6 Inch 360 Degree Heavy Duty Multi-purpose Rotating Bench Vise Swival - Description: 6" Multi-purpose Rotating Bench Vise. Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Specifications: Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open: 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3×4" UPC Does not apply Brand LABLT Base Motion Type Swivel Jaw Width 6 in Jaw Opening Capacity 5-1/4 in Material Cast Iron MPN OM135657OC Condition New Warranty 1 year.
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- Palmgren 9618602 6" Light Duty Machine Vise With Swivel Base - Machine Vise, Machine Vise, Swivel Base, Jaw Width (In.). 6 in, Jaw Opening (In.). 6 in, Throat Depth (In.). 2 in, Overall Length (In.). 14-7/8, Overall Height (In.). 5-1/2, Clamping Force (Lb.). -, Jaw Deflection. 0.002 in At 4000 lbs, Jaw Plate 0.002 in, Bed/Base 0.001 in, Standard Milling Machine Vise with Swivel Base.
- Vunder Vise Versatile Bench Top Clamping Tool Aluminum Workshops Work Shops VGC
- Cross Slide Vise 4" inch Wide Drill Press X - Y Clamp Milling Heavy Duty 2 Way - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Heavy Duty Cross Drill Press Vise 2 Way X-Y Slide Metal Milling Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4 Inch Light Small Bench Vise Clamp Household 360 Degree Rotation Bench Vise - Size：23.5 15.5 12.7cm.
- Mini Milling Machine Bench Fixture Cross Slide X Y Table Worktable Drill Vise! - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Cross Slide Vise 4" inch Wide Drill Press X - Y Clamp Milling Heavy Duty USA NEW - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- 4" Heavy Duty Cross Slide Drill Press X- Y Compound Vise Bench Metal Milling NEW - Description Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. The top and bottom cross slide vise with bi-directional movement allows easy machining of high precision and quality wood and metal parts. Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Westward 10D744 4" Machine Bench Vise With Stationary Base - Zoro Select 6Ba67 Class 8.8, M12-1.50 Hex Head Cap Screw, Zinc Plated Steel, 70. Light Industrial. & Recepticles. Electrical Outlets. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- Yest 4.25" Steel Jaw Swivel Bench Vise 9.5" Throat #41C Mfg. Equipment USA - Lengths: 17x9.75x8".
- D Heavy Duty 4" Steel Jaw Swivel Bench Vise Mfg. Equipment USA
- Columbian 6" Steel Jaw Swivel Bench Vise 10" Throat #D46 Mfg. Equipment USA - Lengths: 15x9-3/8x9".
- Dayton 31Lz69 5" Machine Vise With Fixed Base - The high precision fully ground base gives you more stability when working on smaller parts. This machine vise also features a jaw deflection of 0.0125 in at 33 lb, making it easy to hold even the smallest parts in place while you work on them.
- Mini Milling Machine Bench Fixture Cross Slide X Y Table Worktable Drill Vise! - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Columbian 5.5" Steel Jaw Swivel Base Vise 14" Throat #D55 Mfg. Equipment USA - Lengths: 13x7.5x6.5", 6" Throat.
- Babco 6" Steel Jaw Swivel Bench Vise 14" Throat Model#160 Mfg. Equipment Japan - Lengths: 17x9x10".
- Ridgetool Cast Iron Swivel Bench Vise #33 CPN 3.5" Steel Jaw Mfg. Equipment
- Craftsman Heavy Duty Swivel Bench Vise 6" Inch Steel Jaw #51856 Mfg. Equipment
- Vintage Heavy Duty 4'' Machinist Drill Press Vise 3" wide jaws - 4" Machinist Drill Press Vise. And Just Strange and Weird Stuff !! Nice smooth action. Heavy Duty (11 lbs). Looks in Great Shape!
- 5“ Heavy Duty Multipurpose Vise Bench Vise 360-Degree Rotation Clamp on Vise - Description A 5-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features Durable Material Built by ductile cast iron, the vise is more durable and hard when in use. Designed for long service time. Powerful Clamping Jaws These jaws adjust well to the workpieces to provide powerful clamping pressure while reducing marring for superior grip. Swivel Base.
- Heavy Duty 5" Swivel Multi-Purpose Rotating Bench Vise 360 Degrees Rotation - Swivel Multipurpose Bench Vise A 5-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features Durable Material Built by ductile cast iron, the vise is more durable and hard when in use. Designed for long service time. Powerful Clamping Jaws These jaws adjust well to the workpieces to provide powerful clamping pressure while reducing marring for superior grip..
- 5“ Multipurpose Vise Bench Vise 360-Degree Rotation Clamp on Vise Heavy Duty - Description Swivel Multipurpose Bench Vise A 5-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features Durable Material Built by ductile cast iron, the vise is more durable and hard when in use. Designed for long service time. Powerful Clamping Jaws.
- Mini Milling Machine Bench Fixture Cross Slide X Y Table Worktable Drill Vise! - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Wilton 450 Bullet Vise With Swivel Base, 4-1/2" Jaws, Opening Capacity 8" - It is in very good lightly used working condition.
- Vintage AREO SUPPLY 4'' Machinist Drill Press Vise 2" wide jaws - 4" Machinist Drill Press Vise. Lots of drill marks! And Just Strange and Weird Stuff !! Works Properly.
- 4" Angle Vise With 2-Way Swivel Movement (3900-0018) - Vise handle included. Angle height is 5.7". Opening of jaws is 3.2". MACHINE TOOL ACCESSORIES. Vises are supplied with plain jaws. Hardened and ground jaws.
- 5" 2-Way Swivel Movement Angle Vise (3900-0015) - Vise is supplied with plain jaws. Vise handle included. MACHINE TOOL ACCESSORIES. AIR, POWER & HAND TOOLS.
- 3.2inch Bench Vises Workbench Tools Vice For Woodworkers Workshop Use DIY - 360° Rotation. Built-in 360-degree swivel base, the workbench vise is perfect for various clamping angles for flexibility. Smooth guide rail makes the screw and handle use smoothly and effortlessly.
- Wilton Tradesman 1765 Steel Anvil Bench Vise w/ 3 Piece Ball Peen Hammer Kit - This general purpose bench vise is ideal for clamping down lumber, pipe, and more while you drill, saw, or fasten. Features a striking anvil for forming and shaping materials. Includes grooved steel jaw inserts.
- NO CLAMP Goehners Heavy Duty Bench Vise Table Swivel Clamping Tools - New Other, Missing original box.
- Compound Worktable Cross Slide Bench Drilling Milling Vise Working Table Set New - The mini multi-functional working table is essential tool for mini bench drill, electric drill stand, milling machine and drilling machine. ☆ Very useful tool for electric drill, mini bench drill, milling machine and drilling machine.
- 1PCS 6-jaw 5" Lathe Chuck 125mm Self-Centering 3000rpm Metalworking Clamp Chuck - 1 x 6 Jaw 5" Lathe Chuck. Max Input Torque: 100N. External Jaws Clamping Range : 38-110mm.
- Mini Milling Machine Bench Fixture Cross Slide X Y Table Worktable Drill Vise! - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- 1PC Sanou 3" 3 Jaw Lathe Chuck K11-80 Self Centering M6 Inside Outside Jaws
- 4" Cross Drill Press Vise Slide Metal Milling EDM 2 Way X- Y Clamp Machine Black - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Mini Milling Machine Bench Fixture Cross Slide X Y Table Worktable Drill Vise! - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Mini Milling Machine Bench Fixture Cross Slide X Y Table Worktable Drill Vise! - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Wilton Tradesman Bench Vise — 6 1/2in. Jaw Width, Model# 1765 - The Wilton Tradesman Bench Vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut, the Tradesman round channel vise nut is anchored at the rear. This rear-anchored nut provides straight line pull and even pressure, resulting in greater durability. This 6 1/2in. jaw width heavy-duty vise is ideal for tradesmen, automotive applications, metal fabrication, service/MRO, utility work, and construction sites. Features a double lockdown, replaceable jaw with reversible inserts, and 360 swivel base. Enclosed spindle construction. Incredible clamping power Large anvil. 60,000 PSI ductile iron body, jaw and base are virtually indestructible. Dimensions L x W x H in. 9 5/8 x 17 13/16 x 68 1/8, Double Lock-Downs Yes, Jaw Capacity in. 6 .
- 4" Heavy Duty Cross Drill Press Vise 2 Way X-Y Slide Metal Milling Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Work Table X Y Axis Bench Drill Press Vise Cross Slide Fixture Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- Vintage Craftsman 5 1/2" Bench Vise Swivel 391.5187 Industrial Anvil Pipe Vice - As shown in the last photo, the handle that opens/closes the vise has a negligible bend to it.
- Grizzly T27893 5" Multi-jaw Rotating Bench Vise - T27893 5" Multi-jaw Rotating Bench Vise. Vise swivels 360° on its base and there's even an anvil face on top.
- Bessey Tools Industrial Bench Vise Swivel Base 6" Width No Handle Part# BV-DF6SB - 6" Jaw Width. Swivel Base. Condition: Open Box - Handle Missing. We have done our best to ensure that all parts are included in these sets. This set may have been opened previously therefore we cannot ensure that all small parts are included.
- 4" Cross Slide Drill Press Vise Metal Milling Clamp Machine 2 Way X-Y Heavy Duty - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" 2-Way X-Y Heavy Duty Cross Drill Press Vise Slide Metal Milling Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 6" Mechanic Bench Vise Table Top Clamp Press Locking Ultralight Swivel Base US - Description: Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" Package Include: 1 × 6" Mechanic Bench Vise.
- 6" Mechanic Bench Vise Table Clamp Press Locking Swivel Base Equipment Tool - Description: Heavy duty industrial quality 6" table vise. Serrate steel jaws. 3 Down Slots. 360° double locking swivel base. Provides excellent clamping and holding power. Swivel base allow you to get the correct angle on your work piece. Precision crafted and designed to provide dependable service and sanctification. Great item for both home and industrial uses. Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" What's in the package? 1 × 6" Mechanic Bench Vise Brand autoooparts MPN APO90016 Type Bench Vice UPC Does not apply.
- 6" Mechanic Bench Vise Table Top Clamp Press Locking Swivel Base Heavy Duty - Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" What's in the package? 1 x 6" Mechanic Bench Vise Brand Handdo MPN 461332 Type Bench Vice UPC Does not apply.
- 6" Mechanic Bench Vise Table Top Clamp Press Locking Ultralight Swivel Base - Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" What's in the package? 1 x 6" Mechanic Bench Vise Brand yibei-tech MPN YI78764 Type Bench Vice UPC Does not apply.
- 4" Cross Slide Vise Drill Press Metal Milling 2-Way X-Y Heavy Duty Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 3"/4" Precision Milling Machine Vise Tilting Guide Rod Angle Flat-nose Pliers
- Cross Slide Vise 4 inch Wide Drill Press X - Y Clamp Milling Heavy Duty 2 Way - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Westward 10D702 3-1/2" Standard Duty Combination Vise With Swivel Base - New
- Tow Hitch Truck 6" Bench Vise Fits 2" Inch Hitch Receiver W/ Bench Mount Bracket - Durability and Dependability - Put your project in the sure grip of the replaceable nonslip serrated steel jaws and it won't budge. Style Bench Vise Hitch Mount Clamp. 2" Hitch Mount Design - While mounted in the hitch receiver, it sits at a perfect working height that won't interfere with the truck bed or tailgate.
- Cross Drill Press Vise 2 Way X-Y Clamp Heavy Duty Machine Slide Metal Milling - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Bench Drill Press Vise Fixture Milling Machine Mini Compound Working Table NEW - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Mini Precision Milling Machine Worktable Multifunction Drill Vise Fixture Table
- Wilton 28807 Tradesman 1765 Vise, 6-1/2" Jaw Width, 6" Jaw Opening, 4" Throat - The Wilton Vise Tradesman 1765 is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the Tradesman round channel vise nut is anchored at the rear which provides straight line pull and even pressure resulting in greater durability.
- Heavy-duty Tilting Angle Flat-nose Pliers 6-incMilling Machin-use Tilting Vise - Jaw height: 50mm. Jaw width: 160mm. Positioning key width: 18mm. Maximum clamping force: 29KN. Maximum opening: 125mm.
- Labwork Bench Vise Lockdown Milling Machine Clamping Precision Without Base 5" - Fitment： For Finishing Milling Machines, Drilling Machines, And Precision Parts. Description： -Type: Bench Vise -Jaw Height: 1.6" / 4 cm -Jaw Width: 5" / 12.5 cm -Jaw Opening: 5" / 12.5 cm -Max Clamping Force: 24 kN -Jaw Material: 45# Steel -Body Material: HT250 Gray Cast Iron -Wrench Material: QT500 Ductile Iron -Vise Height: 4.3" / 11 cm -Net Weight: 39 lbs / 18 kg -Package Dimensions (L x W x H): 17" x 11" x 6" / 42 x 28 x 14 cm Features & Details：.
- 5" Lockdown CNC Milling Machine Bench Vise Clamping Vice Precision Without Base - Specification： Type: Bench Vise Jaw Height: 1.6" / 4 cm Jaw Width: 5" / 12.5 cm Jaw Opening: 5" / 12.5 cm Max Clamping Force: 24 kN Jaw Material: 45# Steel Body Material: HT250 Gray Cast Iron Wrench Material: QT500 Ductile Iron Vise Height: 4.3" / 11 cm Net Weight: 39 lbs / 18 kg Package Dimensions (L x W x H): 17" x 11" x 6" / 42 x 28 x 14 cm Features： Heavy-Duty Material The vise is made of HT250 cast iron with strong toughness and high tensile strength. Internal refine grinding treatment, smooth and steady, no jamming. Hardened Clamping Jaw.
- 5" Lockdown CNC Milling Machine Bench Vise Clamping Vice Precision Without Base - Specifications： Type: Bench Vise Jaw Height: 1.6" / 4 cm Jaw Width: 5" / 12.5 cm Jaw Opening: 5" / 12.5 cm Max Clamping Force: 24 kN Jaw Material: 45# Steel Body Material: HT250 Gray Cast Iron Wrench Material: QT500 Ductile Iron Vise Height: 4.3" / 11 cm Net Weight: 39 lbs / 18 kg Package Dimensions (L x W x H): 17" x 11" x 6" / 42 x 28 x 14 cm Description：.
- 5" Lockdown Milling Machine Bench Precision Without Base Vise Clamping Vice - Specifications： Type: Bench Vise Jaw Height: 1.6" / 4 cm Jaw Width: 5" / 12.5 cm Jaw Opening: 5" / 12.5 cm Body Material: HT250 Gray Cast Iron Wrench Material: QT500 Ductile Iron Vise Height: 4.3" / 11 cm Net Weight: 39 lbs / 18 kg Package Dimensions (L x W x H): 17" x 11" x 6" / 42 x 28 x 14 cm Max Clamping Force: 24 kN Jaw Material: 45# Steel Description：.
- 5" Lockdown CNC Milling Machine Bench Precision Without Base Vise Clamping Vice - Brand turitrade MPN TR21174 UPC Does not apply Type Vise Warranty 2 year Bundle Description No Modified Item No Modification Description No Jaw Width 5 in Base Motion Type Stationary Jaw Opening Capacity 5 in Max Clamping Force 24 kN.
- 5" Accu Lock Vise Precision Milling Machine Bench Clamp Clamping Vice - Feature： Type: Bench Vise Jaw Height: 1.6" / 4 cm Jaw Width: 5" / 12.5 cm Jaw Opening: 5" / 12.5 cm Max Clamping Force: 24 kN Jaw Material: 45# Steel Body Material: HT250 Gray Cast Iron Wrench Material: QT500 Ductile Iron Vise Height: 4.3" / 11 cm Net Weight: 39 lbs / 18 kg Package Dimensions (L x W x H): 17" x 11" x 6" / 42 x 28 x 14 cm Description： Heavy-Duty Material The vise is made of HT250 cast iron with strong toughness and high tensile strength. Internal refine grinding treatment, smooth and steady, no jamming. Hardened Clamping Jaw.
- Work Table X Y Axis Bench Drill Press Vise Cross Slide Fixture Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- X Y Axis Bench Drill Press Vise Milling Machine Work Table Fixture Cross Slide - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Wilton Vise 6-1/2" Jaw Width 1765 Tradesman Vise Cast Iron Heavy Duty Bench - The Tradesman round channel vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the Tradesman round channel vise nut is anchored at the rear which provides straight line pull and even pressure resulting in greater durability.
- Vintage Pony Bench Vise 3 1/2' Jaw Anvil Pipe Clamp Rotating Base #23530 - ##10306/H4.
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- Vintage Wilton 1760 Tradesman Vise 6" Bullet Swivel Base/Dbl Lock 65 lbs
- 3/4/5 Inch Vise Precision Milling Drilling Machine Bench Clamping Lock Vise - Type: Bench Vise. Vise Height: 2.8" (70 mm). 1 x 3" Bench Clamp Vise. Vise Height: 3.9" (98 mm). 1 x 4" Bench Clamp Vise. Max Clamping force: 15 KN. Jaw height: 1.2" (30 mm). Jaw width: 3" (80 mm).
- Westward 10D723 9" Standard Duty Woodworking Vise With Stationary Base - If you are looking for a standard duty woodworking vise, the Westward 10D723 9" Standard Duty Woodworking Vise is an excellent choice. Made of ductile iron, this standard duty woodworking vise has smooth jaw faces and two mounting points.
- Dayton 4Tk04 6" Machine Vise With Fixed Base - Machine Vise, Drill Press Vise, Fixed Base, Jaw Width (In.). 6 in, Jaw Opening (In.). 6 in, Throat Depth (In.). 2 in, Overall Length (In.). 13-3/4 in, Overall Height (In.). 4 in, Jaw Deflection 0.002 in @ 2000 lbs, Jaw Plate Square to 0.002 in, Bed/Base Parallel to 0.001 in, Can Be Turned on Either Side or Set on End for Use.
- Work Table X Y Axis Bench Drill Press Vise Cross Slide Fixture Milling Machine - This milling machine table is made of high-quality aluminum alloy, which is strong and durable. 1 Milling Machine Table. Firm Clamping: the Milling Machine Table Is Designed with a T-notch, Which Can Increase the Friction of the Table and Improve the Clamping Force.
- NEW 6-jaw 5" Lathe Chuck 125mm Self-Centering 3000rpm Metalworking Clamp Chuck - (1 x 6 Jaw 5" Lathe Chuck. excluded.). Max Speed : 3000R/min. Max Input Torque: 100N.
- 6Jaw 125mm Lathe Chuck 5" Self-Centering Step Jaws Metal Lathe Tool Accessory - 1 x 6 Jaw 5" Lathe Chuck. Internal Jaws clamping range : 2.5-40mm. Ineternal Jaws Jamming Range : 38-125mm. External Jaws Clamping Range : 38-110mm. Max Input Torque: 100N. Max Speed : 3000R/min.
- ITM Industrial Bench Grinder Stand Suits 200mm 8" & 250mm 10" Machine TM403-016 - Industrial Bench Grinder Stand for use with most 200mm and 250mm Bench Grinders. Excellent work height for comfortable extended use. Heavy-duty steel construction. Parts / Water tray holder on front (tray not included). Pre-slotted top plate for multi-fit applications. Pre-drilled base plate for easy mounting. Heavy-duty powder coat finish.
- Work Table X Y Axis Bench Drill Press Vise Cross Slide Fixture Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Work Table X Y Axis Bench Drill Press Vise Cross Slide Fixture Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Cross Slide X Y Axis Bench Drill Press Vise Milling Machine Work Table Fixture - This milling machine table is made of high-quality aluminum alloy, which is strong and durable. 1 Milling Machine Table. Firm Clamping: the Milling Machine Table Is Designed with a T-notch, Which Can Increase the Friction of the Table and Improve the Clamping Force.
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- Cross Slide Vise 4" inch Wide Drill Press X - Y Clamp Milling Heavy Duty 2 Way - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Heavy Duty Cross Slide Vise 4" inch Wide Drill Press X - Y Clamp Milling USA HOT - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Wilton 6.5" Reversible Bench Vise W/ 360° Swivel Base 50016 FREE SHIPPING!! - Wilton 6.5" Reversible Bench Vise W/ 360° Swivel Base 50016. The Wilton 6.5 in. Reversible Bench Vise with 360 deg. Swivel Base is all about versatility. This vise features jaws that open an incredible distance, ranging from 10-3/4 in.
- Westward 10D743 3" Machine Bench Vise With Stationary Base - It features stationary jaws and can be mounted to the base, sides or end. Get the Westward 10D743 3" Machine Bench Vise with Stationary Base and do it right. Ruland Msp-25-F Shaft Collar,Clamp,2Pc,25Mm,Steel.
- 4"Cross Slide Vise Drill Press Metal Milling 2 Way X- Y Heavy Duty Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Cross Slide Vise 4" inch Wide Drill Press X - Y Clamp Milling Heavy Duty 2 Way - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Sanou Mini 4 Jaw K02-63 2.5" 63mm M14 Reversable Self-Centering Jaws Lathe Chuck
- Sanou Mini 4 Jaw K02-50 2" 50mm M14 Reversable Self-Centering Jaws Lathe Chuck - (Excluded.).
- 4" 3 Jaw K01-100B 100mm Z-D 3XM6 Lathe Chuck Self Centering Reversable Jaws - (Excluded.).
- K01-80B 80mm 3" 3 Jaw Mini Lathe Chuck Self Centering Reversable Jaws
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- Work Table X Y Axis Bench Drill Press Vise Cross Slide Fixture Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Pana Vise 2898068 Standard Screw In Base - Pana Vise 2898068 screw down baseWe buy surplus and are not associated with this company and there is no warranty with the company but we offer a 30 day warranty too be working.Nb
- Great Neck 4” Work Shop Bench Vise Mv 712 - This has been inspected.
- Dayton 31Lz68 4" Machine Vise With Fixed Base - It has an exceptional grip that will hold your work in place without slipping or moving. The jaw deflection of 0.010 in at 33 lb ensures consistent gripping power. The throat depth is 1 1/2 in., and the bed/base is 0.004 in.
- Westward 10D747 4" Drill Press Vise With Stationary Base - The Westward 10D747 4" Drill Press Vise is the perfect vise for drilling, tapping and reaming. This machine vise features a stationary base that provides you with solid support when in use. The precision cut coarse thread adjusting screw allows you to quickly drill, tap or ream any material.
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- 4"Cross Slide Vise Drill Press Metal Milling 2 Way X- Y Heavy Duty Clamp Machine - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- 4" Cross Slide Drill Press X- Y Compound Vise Bench Metal Milling Heavy Duty NEW - Description Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. The top and bottom cross slide vise with bi-directional movement allows easy machining of high precision and quality wood and metal parts. Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Dayton 3W766 8" Machine Vise With Fixed Base - Machine Vise, Cross Vise, Fixed Base, Jaw Width (In.). 8 in, Jaw Opening (In.). 8 in, Throat Depth (In.). 2 in, Overall Length (In.). 16-1/2 in, Overall Height (In.). 7-1/4 in, Max. Travel 8 in in Both X and Y Directions, Jaw Deflection 0.002 in @ 2000 lbs, Cross and Longitudinal Handle Rotates Above Machine Table Surface.
- Dayton 6Z848 6" Machine Vise With Fixed Base - Machine Vise, Cross Vise, Fixed Base, Jaw Width (In.). 6 in, Jaw Opening (In.). 6 in, Throat Depth (In.). 2 in, Max. Travel 8 in in Both X and Y Directions, Jaw Deflection 0.002 in @ 2000 lbs, Cross and Longitudinal Handle Rotates Above Machine Table Surface.
- Dayton 4Cpg1 4" Machine Vise With Fixed Base - Machine Vise, 3-Way, Fixed Base, Jaw Width (In.). 4 in, Jaw Opening (In.). 3 1/2 in, Throat Depth (In.). 1 3/16 in, Overall Length (In.). 10.86, Overall Height (In.). 2.37, Clamping Force (Lb.). Milwaukee Valve 515Y 2 2" Fnpt Bronze Swing Y Check Valve.
- Wilton 1765 6-1/2" Tradesman Vise, 4" Throat (28807)
- RIDGID 40215 Model BC810 Top Screw Bench Chain Vise, Bench Vise for 1/2" to 8... - RIDGID 40215 Model BC810 Top Screw Bench Chain Vise, Bench Vise for 1/2" to 8" Pipe and Tubing.
- Wilton Wl9-28828 Pipe And Bench 6" Jaw Round Channel Vise With Swivel Base - Wilton 28828 Includes. Wilton 28828 Features. Wilton 28828 Specifications. Proudly made in the USA, the Combination Pipe and Bench round channel vise is designed to handle the most demanding clamping applications.
- Machinist Tilting 3 1/2” Bench Vise - I don’t see a manufacturer mark on it. It looks like a Palmgren, but not sure. See all pictures for the best description. Check out my other listings as well. Thank you for looking
- Palmgren 9612602 6" Light Duty Machine Vise With - When you need to work on a smaller project, the Palmgren 16 6" Light Duty Machine Vise is the tool for you. It can be used on a base, side or end. The light duty machine vise is ideal for use in a drill press.
- Westward 10D732 5" Drill Press Vise With Stationary Base - Jobber Length Drill Bit. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
- 4"Cross Slide Vise Drill Press Metal Milling 2 Way X- Y Heavy Duty Clamp Machine - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- RIDGID 40195 Model BC410 Top Screw Bench Chain Vise, 1/8-inch to 4-inch Bench...
- ONE 4 Jaw K02-63 2.5" 63mm M14 Reversable Self-Centering Jaws Lathe Chuck NEW
- ONE Mini 4 Jaw K02-63 2.5" 63mm M14 Reversable Self-Centering Jaws Lathe Chuck
- 1PCS Mini 4 Jaw K02-63 2.5" 63mm M14 Reversable Self-Centering Jaws Lathe Chuck
- Sanou NEW 4 Jaw K02-63 2.5" 63mm M14 Reversable Self-Centering Jaws Lathe Chuck
- Sanou 4 Jaw K02-50 2" 50mm M14 Reversable Self-Centering Jaws Lathe Chuck NEW - (Excluded.).
- 1PCS 4 Jaw K02-50 2" 50mm M14 Reversable Self-Centering Jaws Lathe Chuck NEW
- ONE 4 Jaw K02-50 2" 50mm M14 Reversable Self-Centering Jaws Lathe Chuck NEW
- Sanou Mini K02-50 4 Jaw 2" 50mm M14 Reversable Self-Centering Jaws Lathe Chuck
- ONE 4" 3 Jaw K01-100B 100mm Z-D 3XM6 Lathe Chuck Self Centering Reversable Jaws - (Excluded.).
- NEW 4" 3 Jaw K01-100B 100mm Z-D 3XM6 Lathe Chuck Self Centering Reversable Jaws
- K01-100B 4" 3 Jaw 100mm Z-D 3XM6 Lathe Chuck Self Centering Reversable Jaws
- 4" 3 Jaw K01-100B 100mm Z-D 3XM6 Lathe Chuck Self Centering Reversable Jaws NEW
- K01-80B 80mm 3" 3 Jaw Mini Lathe Chuck Self Centering Reversable Jaws NEW
- ONE NEW K01-80B 80mm 3" 3 Jaw Mini Lathe Chuck Self Centering Reversable Jaws
- 1PCS K01-80B 80mm 3" 3 Jaw Mini Lathe Chuck Self Centering Reversable Jaws
- 80mm 3" 3 Jaw Mini Lathe Chuck Self Centering Reversable Jaws K01-80B
- Sanou Mini K01-63 3Jaw 2.5" 63mm M14 Reversable Self-Centering Jaws Lathe Chuck - (K01-63 2.5" 63mm Chuck 1pcs. excluded.).
- Bench Drill Press Vise Cross Slide Compound X Y Axis Milling Machine Table US - Details Rocker Design: The handwheel of this table is controlled by a rocker, which makes the clamping process easier and less laborious. Stable Base: The table is designed with a wider base to make it more stable when working to improve efficiency. Aluminum Tabletop: The tabletop is made of corrosion-resistant and wear-resistant aluminum alloy, so the tabletop is strong and durable. Specification Material: Aluminium Alloy Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Manual Flat Pliers 2-1/2 x 3-3/8" Vise High Precision 0.0002 - Product features: Jaw width: 2-1/2" Jaw opening: 3-3/8" Jaw depth: 1-1/4" Vise length: 7-1/4" V-groove allows for holding of square and round parts, vertically and horizontally Square and parallel within .0002" (tolerance on handbook is mtric) One-piece body construction Hardened and ground Rc 58-62 Precision ground on the front end, rear end, both sides, top and bottom All internal areas precision ground to insure constant accuracy Brand ALL-CARB MPN Does Not Apply Warranty 1 year UPC Does not apply Type Vise Modified Item No Modification Description No Modification Description No.
- 2-1/2 x 3-3/8" Vise High Precision .0002" Hardened and Ground - Product features: Jaw width: 2-1/2" Jaw opening: 3-3/8" Jaw depth: 1-1/4" Vise length: 7-1/4" V-groove allows for holding of square and round parts, vertically and horizontally Square and parallel within .0002" (tolerance on handbook is mtric) One-piece body construction Hardened and ground Rc 58-62 Precision ground on the front end, rear end, both sides, top and bottom All internal areas precision ground to insure constant accuracy Brand ALL-CARB MPN Does Not Apply Warranty 1 year UPC Does not apply Type Vise Modified Item No Modification Description No Modification Description No.
- Vintage Wilton Hd 4" Bullet Vise With Fixed Base - Good Condition - This is a vintage WILTON 4" Bullet Bench vise... I wire brushed it so you could see any damage or 'mistakes' that had been made in it's past... Apart from some minor drill marks it's in good shape with no significant damage, dings or repairs... The jaws/slide move smoothly and close tight... The Screw and nut look very good... It ready for a little filler and a nice paint job!... Please see the (24) pictures for details and condition... This item weighs approx. 42lbs and will be shipped out fast with USPS!
- Chas C Parker #22 PRE USA MERIDEN CT Conn Rare Swivel Base Bench Vise Anvil Horn - The vise's country of origin is the United States, adding to its value. It is an original, not a reproduction, making it even more unique. This item falls under the collectibles category.
- Vintage Wilton Powrarm Powr Arm Junior Jr Swivel Adjustable Vise Base - IT LOCKS INTO POSITION. NO CRACKS OR REPAIRS. LOOK AT THE PICTURES. NO WARRANTIES GIVEN OR IMPLIED. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION.
- Wilton Combination Pipe and Bench Vise — 3.5in. Jaw Width, Model# C0 - This round channel Wilton Combination Pipe and Bench Vise with 3.5in. jaw width is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut, this combination pipe and bench round channel vise nut is anchored at the rear, which provides straight line pull and even pressure and resulting in greater durability. The round channel design also allows for a completely enclosed spindle and nut assembly, keeping debris out and lubrication in for a lifetime of smooth operation. For ultimate versatility, the combination vise is equipped with main jaws, pipe jaws and a machined anvil work surface. Ideal for use in heavy construction, mechanical trades, oil field service, plant maintenance and steel fabrication applications. Dimensions L x W x H i.
- VINTAGE MONARCH No. 218 VISE w/ 3 1/2'' JAWS Lions Head Prentiss - Chip Missing - Very old and used but in good working condition, there is a chunk missing out of the back part as seen in the pics, other then that it has some surface rust and some dings here and there. Works great, just needs to be cleaned up, will ship either usps priority mail or ups ground
- Palmgren 9612153 1-3/4" Light Duty Machine Vise With - Machine Vise, General Purpose, Jaw Width (In.). 1 3/4 in, Jaw Opening (In.). 1 1/2 in, Throat Depth (In.). 1 in, Overall Length (In.). 4-5/16, Overall Height (In.). 1-15/16, Clamping Force (Lb.). -, Jaw Deflection. 0.002 in At 2000 lbs, Jaw Plate 0.002 in, Bed/Base 0.001 in, With Mounting Lugs.
- Westward 10D750 3" Drill Press Vise With Stationary Base - Machine Vise, Tap Locking Lever Can Be Raised or Lowered to Tighten or Loosen Against The Workpiece. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose.
- Westward 10D751 4" Drill Press Vise With Stationary Base - The Westward 10D751 4" Drill Press Vise with Stationary Base is a must-have tool for drilling. The tap locking lever can be raised or lowered to tighten or loosen against the workpiece. It's made of heavy duty aluminum that is rust resistant and can withstand high temperatures.
- Westward 4Yr98 4" Standard Duty Combination Vise With Swivel Base - This Westward 4YR98 Standard Duty Combination Vise with Swivel Base is the perfect solution for holding your work piece in place. You will be able to secure it with ease. The ductile iron vise has a swivel base that makes it easy to position on any surface.
- 4" Metal Detachable Cross Slide Vise Wear-resistant For Surface Grinders&Milling - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in Installation 1. First, align the hole of the rocker with the screw rod and install the rocker. 2. Tighten the screw cap with a wrench. (The nut should not be tightened too much, but leave a certain gap to ensure the smoothness of the screw.) Package Included 1* Cross Slide Vise All Accessories Needed for Installation.
- 4'' Cross Slide Vise Drill Press Metal Milling 2Way X-Y Clamping Vise Heavy Duty - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Drill Press Vise Metal Milling Clamp Machine 2 Way X-Y Heavy Duty - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- 4" Cross Slide Drill press vise Metal Heavy Duty Milling Clamp Machine 2 Way X-Y - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- 4" Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Work Table Cross Slide Bench Drill Press Vise X-Y 2 Axis Milling Machine Fixture - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Work Table Cross Slide Bench Drill Press Vise X-Y 2 Axis Milling Machine Fixture - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Cross Drill Press Vise 2 Way X-Y Clamp Vice Cross Slide Vise Clamp Machine New - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. High-quality Material: Our cross slide vise is made of high-quality cast iron.
- 4"Cross Slide Vise Drill Press Metal Milling 2 Way X- Y Heavy Duty Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4in Carbon Steel Black Cross Slide Vise For Surface Grinders W/ Smooth Handles - Installation 1. First, align the hole of the rocker with the screw rod and install the rocker. 2. Tighten the screw cap with a wrench. (The nut should not be tightened too much, but leave a certain gap to ensure the smoothness of the screw.) Package Included 1* Cross Slide Vise All Accessories Needed for Installation Notes Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.
- Precision 6" Lockdown CNC Vise .0004" NC/CNC Clamping Clamp For Milling Machine - Product description: Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between jaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features:.
- 6" Lockdown CNC Vise .0004" NC/CNC Clamping Clamp For Milling Machine Precision - Product description: Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between jaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features:.
- Precision 6" Lockdown CNC Vise .0004" NC/CNC Clamping Clamp For Milling Machine - Product description: Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between jaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features:.
- 3.3" Blue Multi-functional Portable 360° Swivel Base for Workbench Vise 2-In-1 - Feature:2 IN 1 VISE There are two ways to fixed the workbench- fixed or clamp on the table. For the vice which it can be perfect to present the way of you want.CLAMP VICE Adopted premium cast steel material, the vice workbench weight 4lb, the Jaw opening up to 3inch, Jaw width: 3.2inch, the maximum of clamp workbench 4inch. Upgraded jaw, Non-slip jaw, built-in texture, special screw clamp slot, it has highly toughness and hardness Strong impact resistance. And easy to disassemble.DUAL-PURPOSE Flexible use, you can use the small bench vise on any workbench. The added of weighting and thickened material would let you easy work in the whole day.WIDE RANGE OF APPLICATIONS Suitable for all ki.
- 6" Lockdown CNC Vise .0004" NC/CNC Clamping Clamp For Milling Machine Precision - Product description: Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between jaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features:.
- Precision 6" Lockdown CNC Vise .0004" NC/CNC Clamping Clamp For Milling Machine - Product description: Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between jaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features:.
- 3.3inch Multi-functional Portable 360° Swivel Base 2-In-1 Bench Vise Blue - Description:.
- 6" Lockdown CNC Vise .0004" NC/CNC Clamping Clamp For Milling Machine Precision - Product description: Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between jaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features:.
- Multi-Functional Portable 360° Swivel Base 2-In-1 Bench Vise For Workbench 3.3" - Description:.
- Precision 6" Lockdown CNC Vise .0004" NC/CNC Clamping Clamp For Milling Machine - Product description: Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between jaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features:.
- 6" Lockdown CNC Vise .0004" NC/CNC Clamping Clamp For Milling Machine Precision - Product description: Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between jaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features:.
- Multi-functional Portable 360° Swivel Base 2-In-1 3.3Inch Bench Vise Blue - Description:.
- Precision 6" Lockdown CNC Vise .0004" NC/CNC Clamping Clamp For Milling Machine - Product description: Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between jaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features:.
- 6" Lockdown CNC Vise .0004" NC/CNC Clamping Clamp For Milling Machine Precision - Product description: Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between jaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features:.
- Precision 6" Lockdown CNC Vise .0004" NC/CNC Clamping Clamp For Milling Machine - Product description: Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between jaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features:.
- 6" Super-Lock Precision CNC Vise .0004" NC/CNC Clamping Clamp Device Vising - Product description: Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between jaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features:.
- 4" Cross Machine Vise Heavy Clamp Drill Press Vice Meta Milling Slide Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Multifunction Worktable Milling Machine,Cross Slide X Y Table Drill Vise Fixture - This milling machine table is made of high-quality aluminum alloy, which is strong and durable. The Table Is Not Only Suitable for Miniature Table Drill and Drill Stand Series, but Also Other Suitable Machine Tools.
- Work Table Cross Slide Bench Drill Press Vise X-Y 2 Axis Milling Machine Tool - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Multifunction Worktable Milling Machine,Cross Slide X Y Table Drill Vise Fixture - This milling machine table is made of high-quality aluminum alloy, which is strong and durable. The Table Is Not Only Suitable for Miniature Table Drill and Drill Stand Series, but Also Other Suitable Machine Tools.
- Wilton Bullet Swivel Vise 945 4 1/2" Jaws Open to 5-1/2" Great Working Condition
- Wilton Shop Bench Vise w/ Swivel Base 8" Jaw Width 8" Opening Capacity 63304 - Jaw Width - 8". Throat Depth - 4". Base Type - Swivel. Opening Capacity - 8". Pipe Capacity - 3". 155 Center Ct, Venice, FL 34285.
- Vintage DUNLAP # 05241 Bench Vise, 3-1/8" Wide Jaws, Swivels, Lock, Well Used,VG - It shows a lot of use as pictured. The jaws are 3-1/8" wide and it is 5-1/4" tall the base swivels and locks. (101623)(MS-F3).
- Wilton Tradesman 1765 Steel Swivel Base Anvil Work Vise w/ 4 Pound Sledge Hammer - This general purpose bench vise is ideal for clamping down lumber, pipe, and more while you drill, saw, or fasten. Outdoor Recreation. Features a striking anvil for forming and shaping materials. Exercise & Fitness.
- 3/4" Precision Milling Machine Bench Vise Tilting Pliers Drill Bench Vise Clamp - 3"/4" Precision Milling Machine Vise Tilting Guide Rod Angle Flat-nose Pliers Tilting Pliers Drilling Machine Bench Vise Clamp.
- Multifunction XY Axis Milling Machine Worktable Cross Slide Bench Vise Fixture - Milling Machine Worktable Mini Multifunction Drill Vise Fixture For Bench Drill Description The table applies to mini bench drill and drill bracket series. It can also be applied to other suitable machine. The bench is made up of several adjustable dovetail aluminum alloy, We can guarantee a minimum of space and to ensure accuracy. Specifications: Material: Aluminium Alloy Size: 310 * 90mm * 80mm X-Route: 200mm Y-Route: 50mm Distance of grooves: 34mm T-slot size: standard size slot is 15X8X6mm Scale travel: 1.25mm (circle), 0.05mm (one cell) Packing List 1 * Worktable.
- 4" Heavy Duty Cross Drill Press Vise 2 Way X-Y Slide Metal Milling Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Multifunction Worktable Milling Machine,Cross Slide X Y Table Drill Vise Fixture - This milling machine table is made of high-quality aluminum alloy, which is strong and durable. The Table Is Not Only Suitable for Miniature Table Drill and Drill Stand Series, but Also Other Suitable Machine Tools.
- New Manual Flat Pliers 2-1/2 x 3-3/8" Vise High Precision 0.0002 - Product features Jaw width: 2-1/2" Jaw opening: 3-3/8" Jaw depth: 1-1/4" Vise length: 7-1/4" V-groove allows for holding of square and round parts, vertically and horizontally Square and parallel within .0002" (tolerance on handbook is metric) One-piece body construction Hardened and ground Rc 58-62 Precision ground on the front end, rear end, both sides, top and bottom All internal areas precision ground to insure constant accuracy Brand Handdo MPN 202-1110 UPC Does not apply Base Motion Type Stationary.
- 2-1/2 x 3-3/8" Vise Manual Flat Pliers 0.0002" High Precision - Product features Jaw width: 2-1/2" Jaw opening: 3-3/8" Jaw depth: 1-1/4" Vise length: 7-1/4" V-groove allows for holding of square and round parts, vertically and horizontally Square and parallel within .0002" (tolerance on handbook is metric) One-piece body construction Hardened and ground Rc 58-62 Precision ground on the front end, rear end, both sides, top and bottom All internal areas precision ground to insure constant accuracy Brand autoooparts MPN APO79592 UPC Does not apply Base Motion Type Stationary Jaw Width 2-1/2 in Material Steel.
- KMC Bench Vise with 3-1/2" Wide Jaws & Swivel Base - Pre-Owned/Slightly Used Red KMC Bench Vise With Locking Swivel Base & Integrated Pipe Jaws.
- Vintage Baker 63-3 Bench Vise 3 1/2" Jaws Swivel Base Opens 3 1/2" USA - Other than paint loss, minor nicks and scratches the vise looks good. Made in the USA.
- Nice Vintage Wilton Shop King Chicago 14 5'' Jaw Swivel Anvil Vise Usa - This vintage Wilton Shop King Chicago vise is a sturdy and reliable workholding tool perfect for any metalworking or woodworking project. With a 5 inch jaw width and 4-1/2 inch jaw opening capacity, it is capable of securely holding a wide range of materials.Made from cast iron and featuring a swivel base motion type, this vise is both durable and versatile. It was manufactured in the United States and is a sought-after addition to any workshop. Whether you're a professional craftsman or a DIY enthusiast, this Wilton Shop King Chicago vise is a must-have tool.
- WILTON C0 Combination Vise,3-1/2" Jaw Width - Opening - Vises 5 in, Throat Depth - Vises 4 1/2 in, Deep Throat No, Base Type - Vises Swivel, Pipe Jaw Included Yes, Pipe Capacity - Vises 1/4 in to 2-1/2 in, Reversible No, High-Visibility No, Swivel Angle - Vises 360 Degrees, Jaw Face - Vises Serrated, Quick-Acting No, Material -Vises Cast Iron, Jaw Type Replaceable.
- 2 Way Cross Slide Vise 4 inch Wide Drill Press X - Y Clamp Milling Heavy Duty - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 48298 Ridgid Bench Yoke Vise Replacement Spools For A Bc-210A - For sale are Two 48298 Ridgid Bench Yoke Vise Replacement Spools For A Bc-210A.New old stock Storage Ewfront A11
- Cross Slide Vise 4" inch Wide Drill Press X - Y Clamp Milling Heavy Duty 2 Way - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Cross Slide Vise 4" inch Wide Drill Press X - Y Clamp Milling Heavy Duty 2 Way - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Cross Slide Drill Press Vise 4" 2 Way X-Y Compound Vise Metal Milling Clamping - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Bench Vise and Clamp Locking Base 4" Heavy Duty Vice w Anvil Surface - Jaw width: 4.5", Jaw opening: 4.33", Throat depth:2.36". APPLICATION: Installed on the fitter's workbench to hold the parts to be processed, so as to facilitate the manual operation of the fitter.
- 0-90 degree tilt guide rod angle flat nose pliers tilt drill press bench vise 4# - 0-90 Degree Tilting Guide Rod Angle Flat Nose Pliers Tilt Guide Angle Pliers Tilt Drill Press Bench Vise Clamp.
- Westward 10D702 3-1/2" Standard Duty Combination Vise With Swivel Base - Westward 5Dfr3 1/2" Dr, 1-1/2" Size, Sae Impact Socket, 6 Pts. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
- Work Table Cross Slide Bench Drill Press Vise X-Y 2 Axis Milling Machine Fixture - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Work Table Cross Slide Bench Drill Press Vise X-Y 2 Axis Milling Machine Fixture - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Work Table X Y Axis Bench Drill Press Vise Cross Slide Fixture Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Small Vintage Vise - The overall dimensions for this vintage vise are 5" tall, 5 1/2 long and 1 1/2' wide. The jaws are 1 1/2 " and the jaw capacity is 2 1/2".
- Palmgren 9629745 5" Standard Duty Combination Vise With Swivel Base (G) - Jaw Face Type. Max Jaw Opening. Jaw Face Width. Jaw Pad Material. Includes Pipe Jaw. Spindle Type. Combination Vise. Base Swivel Angle.
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- 4" / 100mm Cross Sliding Engineer Drill Press Vice Machine Vice Hand Clamp Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. High-quality Material: Our cross slide vise is made of high-quality cast iron.
- 4 inch Cross Drill Press Vise Slide Metal Milling 2 Way X-Y Clamp Machine New - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Black Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4in Cross Drill Press Vise Slide Metal Milling EDM Black 2 Way X-Y Clamp Machine - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- George A Colton H&B Jeweler Watchmaker 3” Jaw Bench Vise~Pat June 16 1885~Vtg - The makers mark can’t be found but I’m pretty sure this is an H&B George Colton manufactured vise. It works properly and smoothly. No major issues that I’m aware of. Most of the wear areas are on the top part.
- Multifunction XY Axis Milling Machine Worktable Cross Slide Bench Vise Fixture - Milling Machine Worktable Mini Multifunction Drill Vise Fixture For Bench Drill Description The table applies to mini bench drill and drill bracket series. It can also be applied to other suitable machine. The bench is made up of several adjustable dovetail aluminum alloy, We can guarantee a minimum of space and to ensure accuracy. Specifications: Material: Aluminium Alloy Size: 310 * 90mm * 80mm X-Route: 200mm Y-Route: 50mm Distance of grooves: 34mm T-slot size: standard size slot is 15X8X6mm Scale travel: 1.25mm (circle), 0.05mm (one cell) Packing List 1 * Worktable.
- 6 Inch Heavy Duty Multi-purpose Rotating Bench Vise Swival 360 Degree - Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" Package including：.
- 4" Rotating Bench Vise Swival 360 Degree Cast Iron Multi-purpose US - Multipurpose Vise 4“ Bench Vise 360-Degree Rotation Clamp on Vise with Swivel Base and Head Heavy Duty Multi-Jaw Vise Swivel Multipurpose Bench Vise A 4-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It features with swivel head and base and can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features Durable Material.
- 2 Way Heavy Duty Cross Slide Vise Clamp Machine Drill Press X-Y Clamp Vice Black - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. High-quality Material: Our cross slide vise is made of high-quality cast iron.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Cross Slide Drill Vise Fixture Multifunction Worktable X Y Table Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Sanou 3" 3 Jaw Lathe Chuck Self Centering M6 Inside Outside Jaws K11-80
- 1PC Sanou 3" 3 Jaw Lathe Chuck K11-80 Self Centering M6 Inside Outside Jaws
- Sanou 3" 3 Jaw Lathe Chuck K11-80 Self Centering M6 Inside Outside Jaws - (Excluded.).
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- NEW Sanou 3" 3 Jaw Lathe Chuck K11-80 Self Centering M6 Inside Outside Jaws
- Sanou 3" 3 Jaw Lathe Chuck K11-80 Self Centering M6 Inside Outside Jaws - (Excluded.).
- 1PCS NEW Sanou 3" 3 Jaw Lathe Chuck K11-80 Self Centering M6 Inside Outside Jaws - (Excluded.).
- ONE Sanou 3" 3 Jaw Lathe Chuck K11-80 Self Centering M6 Inside Outside Jaws - (Excluded.).
- Sanou 3" 3 Jaw Lathe Chuck Self Centering M6 Inside Outside Jaws K11-80
- Vintage Technical Devices Co. Circuit Board Vise NICE! - Very Nice Circuit Board Vise. Nice rotating Vise. Will hold up to 8 inches. Made In The USA!
- VINTAGE Morgan Milwaukee 4"X 6" Bench Vise Model # 40A. Swivel Base. 53lb - This is a Morgan Milwaukee 4" Bench Vise Model # 40A with a swivel base. The vise is from the United States and has not been modified.
- 2 In 1 Mount or Clamp on 3.25" Heavy Duty Bench Vise Table Swivel Clamping Tools - Mount this to your work bench or use the detachable clamp on this heavy-duty bench vise as great addition to any workshop. The swivel base motion of this vise allows for the correct angle to your workpiece.Quick adjust button on side for fast convenient operation.Comes with rubber clamp protectors
- Mini Milling Machine Bench Fixture Cross Slide X Y Table Worktable Drill Vise! - Milling Machine Worktable Mini Multifunction Drill Vise Fixture For Bench Drill Description： The table applies to mini bench drill and drill bracket series. It can also be applied to other suitable machine. The bench is made up of several adjustable dovetail aluminum alloy, We can guarantee a minimum of space and to ensure accuracy. Specifications: Material: Aluminium Alloy Size: 310 * 90mm * 80mm X-Route: 200mm Y-Route: 50mm Distance of grooves: 34mm T-slot size: standard size slot is 15X8X6mm Scale travel: 1.25mm (circle), 0.05mm (one cell) Packing List： 1 * Worktable.
- Cross Slide X Y Table Drill Vise Fixture Multifunction Worktable Milling Machine - This milling machine table is made of high-quality aluminum alloy, which is strong and durable. The Table Is Not Only Suitable for Miniature Table Drill and Drill Stand Series, but Also Other Suitable Machine Tools.
- Larin 4 In Bench Vise, Swivel -Anvil GREAT CONDITION, FAST SHIPPING, - Good condition and fully functional. Jaws open and close easily and although it has some rust from age it is solid and has the built in mini anvil which is also in great shape. Pivots no issue either. A nice bath and some fresh grease would be all it could ever need.
- 4" Heavy Duty Cross Drill Press Vise 2 Way X-Y Slide Metal Milling Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Drill Press Vise 2 Way X-Y Compound Vise Metal Milling Clamping - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- RIDGID 40195 BC410 Top Screw Bench Chain Vise - Capacity 1/8" through 4". RIDGID 40195. Bench Chain Vises d Crank handle is anchored to base. Two models available for plastic pipe. Rugged cast-iron base has handy pipe rest and bender.
- Cross Slide Vise 4" inch Wide Drill Press X - Y Clamp Milling Heavy Duty 2 Way - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4"Cross Slide Vise Drill Press Metal Milling 2 Way X- Y Heavy Duty Clamp Machine - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- 4" inch Wide Drill Press X - Y Clamp Milling Heavy Duty 2 Way Cross Slide Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Milling Clamping 4" Cross Slide Drill Press Vise X-Y Compound Bench Vise Metal - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Cross Slide Drill Press Vise 4-Inch Heavy Duty Benchtop Compound Cross Slide - 【Two-way Design】: The vise allow for two axis of travel (X and Y), double direction design, it can move laterally or longitudinally for precise positioning, making it easier and faster for you to complete the task; Longitudinal Stroke: 100mm / 4in; Lateral Stroke: 120mm / 4.7in.
- 4 Inch Cross Slide Drill Press Vise Heavy Duty Benchtop Compound Cross Slide - Clamping with jaws: The cross slide vise jaws are not easily broken, and the cross shaped jaws increase friction and clamping performance. The clamping force is strong, and the workpiece should not shake.
- Swivel Vacu-Vise 3" Multi-Angle Table / Bench Hobby Vise USA
- Dayton 4Yg29 8" Machine Vise With Fixed Base - You can keep your projects safe and secure, while also ensuring that they are in the correct position for easy access. The machine vise features precision-ground guide bars and hardened cams to ensure accurate positioning of small work pieces.
- Vintage Brink & Cotton No. 153 Bench Top Swiveling Table Clamp Vise 3" JAWS - Fresh off a bench. Works great. Shipped usps mail.
- MISSING HANDLES 4" Cross Slide Drill Press Vise Bench Metal Milling Heavy Duty - New Other, Missing handles but still operable. Missing original box. I take photos of the exact item that you will receive, unless stated otherwise.
- Wilton 3-1/2" Jaw Combination Pipe Swivel Bench Vise - To get a freight quote we will need to know the following Prefer to pick it up yourself?. Need it urgently?. Call us and we will do what we can to get it to you quickly. LOCAL PICK-UP. Lister: gn. Will there be a dock or forklift.
- GIBRALTAR Bench & Pipe Combination Vise 8″ Jaw Width, Swivel Base CBV042 - Bench & Pipe Combination Vise. Jaw Width 8.0000. Jaw Opening Capacity 8 in. Base Motion Type Swivel. P 19 Floor. This item appears to be new and in good condition. SOLD AS IS. High Visibility No.
- K01-100B 4" 3 Jaw 100mm Z-D 3XM6 Lathe Chuck Self Centering Reversable Jaws
- Sanou Mini 4 Jaw K02-50 2" 50mm M14 Reversable Self-Centering Jaws Lathe Chuck - (Excluded.).
- 4" 3 Jaw K01-100B 100mm Z-D 3XM6 Lathe Chuck Self Centering Reversable Jaws - (Excluded.).
- K01-80B 80mm 3" 3 Jaw Mini Lathe Chuck Self Centering Reversable Jaws
- ONE NEW K01-80B 80mm 3" 3 Jaw Mini Lathe Chuck Self Centering Reversable Jaws
- ONE 4 Jaw K02-63 2.5" 63mm M14 Reversable Self-Centering Jaws Lathe Chuck NEW
- Sanou Mini 4 Jaw K02-63 2.5" 63mm M14 Reversable Self-Centering Jaws Lathe Chuck
- ONE 4 Jaw K02-50 2" 50mm M14 Reversable Self-Centering Jaws Lathe Chuck NEW
- Cast Iron Swivel Base for 6" Mlling Machine Vise - BASE ONLY - Cast Iron Swivel Base for 6" Mlling Machine Vise - BASE ONLY. Condition is Used. Shipped with USPS Ground Advantage.
- Vintage Pony Bench Vise 3 1/2' Jaw Anvil Pipe Clamp Rotating Base #23530 - I may use recycled boxes in order to be more eco-friendly.
- 5-1/4" Tilting 3 Axis Swivel Machine Milling Vise 4-1/2" Open 90° 40° - 90° swivel base. Size: Length: 16 in. Width: 22 in. Height: 10 in. Unless otherwise specifically agreed to in writing by. Prefer to pick it up yourself?. 40° horizontal. Need it urgently?.
- 6" Machinist Bench Vise 7" Open Parts Or Repair No Screw - Nut and base are in decent condition, no screw or handle. To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly. Prefer to pick it up yourself?.
- 4"Cross Slide Vise Drill Press Metal Milling 2 Way X- Y Clamp Machine Heavy Duty - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Work Table Multifunctional Working Tools Bench Machine Vise Milling Drilling New - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Vintage Machinists Drill Press Vise 3 1/2" Wide, Jaw Opening 4 1/4" 16lb 12oz US
- Ridgid BC4A Bench Chain Vise In Good Working Condition - Ridgid BC4A Bench Chain Vise In Good Working Condition.
- WESTWARD 22XP97 Bench Yoke Vise,1/8 to 4 in - WESTWARD 22XP97. Bench Yoke Vise,1/8 to 4 in. Power adapters and other modifications may be necessary for proper operation in other countries. Grainger reserves the right to accept or reject any order.
- Vintage Littlestown HDW & FDY Co. PA. Clamp-on Bench Vise No. 3 USA 2.5” Jaw
- WILTON 3" Clamp-On Bench and Pipe Vise 2-1/2" Max Jaw Width Stock ITEM 33150 - New in box.
- Nice Vintage Wilton Machinist Bullet Vice 400 60176 3.5" Wide From Pit Crew - The item for sale here is a Wilton Vice. It can from a guy that worked for Howe Racing. It was on his pit crew tool box. It was painted green for them. Help yourself to a good deal. from Antiques and Auto Parts, Collectibles, Household, and Tools.
- RIDGID 40215 BC810 Top Screw Bench Chain Vise - Model No.: BC810. Capacity: 1/2" - 8"RIDGID 40215. Bench Chain Vises d Crank handle is anchored to base. Rugged cast-iron base has handy pipe rest and bender.
- VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - 101014 Bolts - VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - 101014 Bolts. Condition is Used. Shipped with USPS Priority Mail.
- VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - 101014 Alignment Shaft - VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - 101014 Alignment Shaft. Condition is Used. Shipped with USPS Ground Advantage.
- VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - 101014 Base - VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - 101014 Base. Condition is Used. Shipped with USPS Ground Advantage.
- VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - 101014 Handles - VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - 101014 Handles. Condition is Used. Shipped with USPS Ground Advantage.
- VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - 101014 Part - VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - 101014 Part. Condition is Used. Shipped with USPS Ground Advantage.
- VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - Front Part - VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - Front Part. Condition is Used. Shipped with USPS Ground Advantage.
- VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - Base With One Broken Foot - VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - Base With One Broken Foot. Condition is Used. Shipped with USPS Ground Advantage.
- VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - 101014 T Handle Part Only - VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - 101014 T Handle Part Only. Condition is Used. Shipped with USPS Ground Advantage.
- VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - 101014 Part Only - VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - 101014 Part Only. Condition is Used. Shipped with USPS Ground Advantage.
- VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - Without Jaws, Base Only - VINTAGE WILTON 3” BULLET VISE RESTORED 9300 - Without Jaws, Base Only. Condition is Used. Shipped with USPS Ground Advantage.
- Cross Slide Vise 4" inch Wide Drill Press X - Y Clamp Milling Heavy Duty 2 Way - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- For Bench Drill Mini Multifunction Drill Vise Fixture Milling Machine Worktable - Milling Machine Worktable Mini Multifunction Drill Vise Fixture For Bench Drill Description The table applies to mini bench drill and drill bracket series. It can also be applied to other suitable machine. The bench is made up of several adjustable dovetail aluminum alloy, We can guarantee a minimum of space and to ensure accuracy. Specifications: Material: Aluminium Alloy Size: 310 * 90mm * 80mm X-Route: 200mm Y-Route: 50mm Distance of grooves: 34mm T-slot size: standard size slot is 15X8X6mm Scale travel: 1.25mm (circle), 0.05mm (one cell) Packing List 1 * Worktable.
- Work Table X Y Axis Bench Drill Press Vise Cross Slide Fixture Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Westward 5" Jaw Combination Pipe Swivel Base Bench Vise 4" Open - To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly. Prefer to pick it up yourself?. Will there be a dock or forklift.
- Black 4" Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Heavy Duty Cross Drill Press Vise 2 Way X-Y Slide Metal Milling Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Drill Press 2 Way X-Y Slide Metal Milling Vise Clamp Machine Heavy Duty - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Cross Slide Drill Press Vise X-Y 2Axis Compound Work Table Vise Bench Portable - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Milling Machine Work Table Double Guide 2 Axis Cross Slide Drill Vise Fixture - This milling machine table is made of high-quality aluminum alloy, which is strong and durable. Such a strong, durable, and easy-to-use milling machine table is a wise choice for you. High-quality M aterial : This milling machine table is made of high-quality aluminum alloy.
- Mini Cross Working Table X/y Axis Adjustable Worktable Bench Multifunctional - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- 2 Axis Compound Bench Drilling Slide Table X-y Workholding Tool Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Mini Cross Worktable Milling Working Sliding Table X Y Axis Bench Drill Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Bench Worktable X Y Cross Slide Table Mini Drill Vise Milling Machine Vise - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Bench Multifunction Aluminium Alloy Worktable Drill Vise Fixture Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Cross Slide X Y Axis Bench Drill Press Vise Fixture Milling Machine Work Table - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Mini Worktable Milling Working Sliding Table Drill Machine X Y Axis Bench Vise - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Cross Slide Bench Compound Milling Machine Vice Fixture For Bench Drill Vice NEW - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- 2 Axis Milling Machine Compound Work Table Vise Cross Sliding Bench Drill Vise - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Multifunction Worktable Milling Machine Milling Working Table Drill Vise Fixture - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Vintage Wilton Shop King 3-1/2" Bench Vise made in USA Chicago cast iron - Great shape, vintage shop vise, works perfectly, needs a little clean up
- Forward 0804 4-Inch Bench Vise with Swivel Base and Anvil (4") - 120-degree swivel base featuring dual lock-down nuts allows rotating the vise to position workpieces, 3 mounting holes anchor vise securely to a workbench. Jaw Width: 4" (10cm); Jaw Opening: 3" (7.6cm); Throat Depth: 2" (5cm); 2.5"x2.6" (6.3x6.6cm) smooth polished steel anvil for forming and shaping work.
- Vintage Technical Devices Co. Culver City Circuit Board Holder Cast Iron w Base - Culver City Circuit Board Holder Cast Iron w Base. has an embossed cast iron base. base is approx. adjusts side to side and or up and down.
- 4" Cross Slide Drill Press Vise 2 Way X-Y Compound Metal Milling Clamp Machine - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Heavy Duty Precision Bench Vise with Anvil 5 Inch Multifunctional Bench Vise
- Craftsman 391.5180 Bench Vise Swivel 3-1/2" Made in Japan Cleaned & Painted - Very nice Cleaned and Repainted Works as it should See pictures.
- 6-jaw 5" Lathe Chuck K13-125 Self-Centering 3000rpm Metalworking Clamp Chuck - (1 x 6 Jaw 5" Lathe Chuck. Ineternal Jaws Jamming Range : 38-125mm. Internal Jaws clamping range : 2.5-40mm. staic gripping dia: 17KN. excluded.).
- 40195 BC410 1/8-4" Capacity Top Screw Bench Chain Vise Ridge Tool Company 40195 - MODEL NO. BC410 TOP SCREW BENCH CHAIN VISE, 1/8"-4" PIPE CAPACITY CRANK HANDLE IS ANCHORED TO BASE. RUGGED CAST-IRON BASE HAS HANDY PIPE REST AND BENDER. CAPACITIES OF 1/8" THROUGH 8". TWO MODELS AVAILABLE FOR PLASTIC PIPE. TOOTHLESS JAWS ARE NEOPRENE-COATED TO PREVENT SCORING OF PIPE.
- 6" Cross Sliding Vise Heavy Duty X-Y Clamp Drill Press Meta Milling Machine Vise - This 6" vise clamp machine will easily turn your drill press into a milling machine! 1 Vise Clamp Machine. Jaw Depth: 4cm/ 2in. Jaw Width: 15.3cm/ 6in. Applicable Objects: Water Pump, Pipe, Steel Wire, Clamp Table.
- Heavy Duty Precision Bench Vise with Anvil 5 Inch Multifunctional Bench Vise
- Cross Slide Vise 4" Wide Drill Press X - Y Clamp Milling Heavy Duty 2 Way Black - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Sliding Drill Press Vise Slide Vice 2 Way X-Y Clamp Machine Black New - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. High-quality Material: Our cross slide vise is made of high-quality cast iron.
- Cross Slide Vise 4" Wide Drill Press X - Y Clamp Milling Heavy Duty 2 Way Black - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Heavy Duty Cross Drill Press Vise 2 Way X-Y Slide Metal Milling Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Hot MiniTable Vise Aluminum Alloy Vice Swivel Lock Clamp Craft Hobby Cast - 1 x Table Vise. This is a cast aluminum vice that has a swivel lock action that holds the vice firmly to the table. Jaw opening: 30 mm Max. Jaw width: 40 mm. Fixed clamp: 35mm Max. Material: Aluminum alloy.
- 4" Heavy Duty Cross Drill Press Vise 2 Way X-Y Slide Metal Milling Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Multifunction Precision Milling Machine Working Vise Table Adjustable Workbench - Packing List 1 * Worktable.
- Metal Milling Clamping 4" Cross Slide Drill Press Vise X-Y Compound Bench Vise - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Vintage Bench Vise Ohio Forge 4" Jaws. Collectors Item or Useable Tool for Today - This is a Vintage Ohio Forge Bench Vice. You don't see these Branded as "Ohio Forge" too often as they are a bygone Manufacturer for private labels. Home Depot once used them as a mainstay for thier branded vises. This one has 4 inch Jaws, a swivel, Anvil and is in very good shape. It's one for collectors, or can be used as you main bench vise tool. There will be some assembly as the swivel will be separated from the body to get it in a reasonably priced shipping container. Please view photos carryfully. There are some mars in the red paint that coats the devise.
- 6" Aluminum Vise Jaws with Magnetic, Rubber Pads Covers for Woodworking 2 Pair - The caps are made of aluminum alloy steel, durable to use and smooth surface.The pads are made of soft rubber, with rhombus anti-slip patterns, stable clamping and do not shake.There are embedded magnets, can be firmly attached to the jaws of the bench vise.Drawer design, easy to install and disassemble.The vise jaws can hold wood, metal, plastic, pipe and threaded objects to protect most flat, round or irregular products.Specification:Total Size: 152mm x 28.5mm x 25mm / 6" x 1.12" x 0.98" (L*W*H)Material: Aluminum Alloy Steel, RubberColor: Silver Tone, BlackPackage Content:2 Pair (4 Pcs) x Magnetic Vise Jaws.
- 6" Aluminum Vise Jaws with Magnetic, Rubber Pads Covers for Woodworking 2 Pair - The caps are made of aluminum alloy steel, durable to use and smooth surface.The pads are made of soft rubber, with rhombus anti-slip patterns, stable clamping and do not shake.There are embedded magnets, can be firmly attached to the jaws of the bench vise.Drawer design, easy to install and disassemble.The vise jaws can hold wood, metal, plastic, pipe and threaded objects to protect most flat, round or irregular products.Specification:Total Size: 152mm x 28.5mm x 25mm / 6" x 1.12" x 0.98" (L*W*H)Material: Aluminum Alloy Steel, RubberColor: Silver Tone, BlackPackage Content:2 Pair (4 Pcs) x Magnetic Vise Jaws.
- 4" Aluminum Vise Jaws with Magnetic, Rubber Pads Covers for Woodworking 2 Pair - The caps are made of aluminum alloy steel, durable to use and smooth surface.The pads are made of soft rubber, with rhombus anti-slip patterns, stable clamping and do not shake.There are embedded magnets, can be firmly attached to the jaws of the bench vise.Drawer design, easy to install and disassemble.The vise jaws can hold wood, metal, plastic, pipe and threaded objects to protect most flat, round or irregular products.Specification:Total Size: 101mm x 28.5mm x 25mm / 4" x 1.12" x 0.98" (L*W*H) Material: Aluminum Alloy Steel, RubberColor: Silver Tone, BlackPackage Content:2 Pair (4 Pcs) x Magnetic Vise Jaws.
- 4" Aluminum Vise Jaws with Magnetic, Rubber Pads Covers for Woodworking 2 Pair - The caps are made of aluminum alloy steel, durable to use and smooth surface.The pads are made of soft rubber, with rhombus anti-slip patterns, stable clamping and do not shake.There are embedded magnets, can be firmly attached to the jaws of the bench vise.Drawer design, easy to install and disassemble.The vise jaws can hold wood, metal, plastic, pipe and threaded objects to protect most flat, round or irregular products.Specification:Total Size: 101mm x 28.5mm x 25mm / 4" x 1.12" x 0.98" (L*W*H) Material: Aluminum Alloy Steel, RubberColor: Silver Tone, BlackPackage Content:2 Pair (4 Pcs) x Magnetic Vise Jaws.
- 3" Aluminum Vise Jaws with Magnetic, Rubber Pads Covers for Woodworking 2 Pair - The caps are made of aluminum alloy steel, durable to use and smooth surface.The pads are made of soft rubber, with rhombus anti-slip patterns, stable clamping and do not shake.There are embedded magnets, can be firmly attached to the jaws of the bench vise.Drawer design, easy to install and disassemble.The vise jaws can hold wood, metal, plastic, pipe and threaded objects to protect most flat, round or irregular products.Specification:Total Size: 75mm x 28.5mm x 25mm / 3" x 1.12" x 0.98" (L*W*H)Material: Aluminum Alloy Steel, RubberColor: Silver Tone, BlackPackage Content:2 Pair (4 Pcs) x Magnetic Vise Jaws.
- 3" Aluminum Vise Jaws with Magnetic, Rubber Pads Covers for Woodworking 2 Pair - The caps are made of aluminum alloy steel, durable to use and smooth surface.The pads are made of soft rubber, with rhombus anti-slip patterns, stable clamping and do not shake.There are embedded magnets, can be firmly attached to the jaws of the bench vise.Drawer design, easy to install and disassemble.The vise jaws can hold wood, metal, plastic, pipe and threaded objects to protect most flat, round or irregular products.Specification:Total Size: 75mm x 28.5mm x 25mm / 3" x 1.12" x 0.98" (L*W*H)Material: Aluminum Alloy Steel, RubberColor: Silver Tone, BlackPackage Content:2 Pair (4 Pcs) x Magnetic Vise Jaws.
- 5" Aluminum Vise Jaws with Magnetic, Rubber Pads Covers for Woodworking 2 Pair - The caps are made of aluminum alloy steel, durable to use and smooth surface.The pads are made of soft rubber, with rhombus anti-slip patterns, stable clamping and do not shake.There are embedded magnets, can be firmly attached to the jaws of the bench vise.Drawer design, easy to install and disassemble.The vise jaws can hold wood, metal, plastic, pipe and threaded objects to protect most flat, round or irregular products.Specification:Total Size: 127mm x 28.5mm x 25mm / 5" x 1.12" x 0.98" (L*W*H)Material: Aluminum Alloy Steel, RubberColor: Silver Tone, BlackPackage Content:2 Pair (4 Pcs) x Magnetic Vise Jaws.
- 5" Aluminum Vise Jaws with Magnetic, Rubber Pads Covers for Woodworking 2 Pair - The caps are made of aluminum alloy steel, durable to use and smooth surface.The pads are made of soft rubber, with rhombus anti-slip patterns, stable clamping and do not shake.There are embedded magnets, can be firmly attached to the jaws of the bench vise.Drawer design, easy to install and disassemble.The vise jaws can hold wood, metal, plastic, pipe and threaded objects to protect most flat, round or irregular products.Specification:Total Size: 127mm x 28.5mm x 25mm / 5" x 1.12" x 0.98" (L*W*H)Material: Aluminum Alloy Steel, RubberColor: Silver Tone, BlackPackage Content:2 Pair (4 Pcs) x Magnetic Vise Jaws.
- 4inch Cross Slide Drill Press X- Y Compound Vise Bench Metal Milling Heavy Duty - Description Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. The top and bottom cross slide vise with bi-directional movement allows easy machining of high precision and quality wood and metal parts. Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Cross Slide Drill Press 4inch X- Y Compound Vise Bench Metal Milling Heavy Duty - Description Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. The top and bottom cross slide vise with bi-directional movement allows easy machining of high precision and quality wood and metal parts. Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Vintage WILTON 121070 Bench Anvil Vise - 4 inch
- Vintage Columbian D45-M3 Bench Vise 5 inch jaws - Vintage Columbian D45-M3 Bench Vise 5 inch jaws. Works smooth please look at pictures and if you need more Infromation please let me know . Vise weight before box is 38 pounds .
- 1PC DIY use 10 MM Holding Arbor For K01-50 2" Self-centering 3 Jaw Mini Chuck - Neutral or. We would try our best to help you solve the problem. is what we are striving for. We will provide the service as best as we can, cause the. If you are not satisfied with our products.
- Compound Milling Machine Work Table XY Axis Cross Slide Bench Drill Vise Fixture - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Vintage Craftsman 506-51800 Vise 3 1/2" Jaws Swivel Base Opens 4 1/2" USA - Other than paint loss, minor nicks and scratches the vise looks good. Made in the USA.
- Vintage Craftsman 51865 Vise 4 1/2" Reversible Jaws Swivel Base Opens 5 1/2" USA - Other than minor nicks and scratches the vise looks great. Made in the USA.
- Vintage FULLER 4 1/2" Bench top Swivel Vise, Japan, Old Shop, Garage Tool - 4 1/2" JAW. USED,RUSTY,DIRTY. MADE IN JAPAN.
- Multi-function workbench Mini Bench Drill Fixture Vise XY-axis Slide Worktable - X -axis travel: 200mm. - The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machines. - Mini multifunctional working table, bench work table can realize the multifunction drilling and milling operation.
- Metal Milling Clamping 4" Cross Slide Drill Press Vise X-Y Compound Bench Vise - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- 4500-3 Swivel Base Plate 11206S03 for Heavy Duty Mechanics Vise - The pictures provided depict the actual item(s) available for sale in our inventory.
- Vintage Wilton Vise 121079 4" Jaw Tilting Swivel Base Table Mount Machinist - Presented for your consideration is this vintage Wilton 121079 Tilted Swivel Base Vise - approx. 4" opening, mountable on a table. Overall condition is GOOD. I don’t see any cracks or breaks on it but with some obvious evidence of use, a little rusty, and could probably use a good cleaning and some grease. Thank you
- WILTON Bench & Pipe Combination Vise: 5″ Jaw Width, 5-1/4″ Jaw Opening - Bench & Pipe Combination Vise. Jaw Opening Capacity 5-1/4 in. Jaw Width 5.0000. Pipe Jaw Included Yes. Features Replaceable Jaw; Fully Enclosed Spindle; Maximum Stability. Throat Depth 3-3/4. Swivel Angle 360.
- Cross Slide Vise 4" inch Wide Drill Press X - Y Clamp Milling Heavy Duty 2 Way - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Cross Slide Vise 4" inch Wide Drill Press X - Y Clamp Milling Heavy Duty 2-Way - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 3/4/5 Inch Vise Precision Milling Drilling Machine Bench Clamping Lock Vise - Bench Vise. Drive Mode. Model Number.
- Masterforce 4" Low Profile Vise New 360 Swivel Base Ratcheting Handle Dual Steel - With a 360 swivel base and ratcheting handle, this vise is perfect for holding materials securely in place while you work. It's designed with a low profile to minimize obstruction and maximize workspace, making it perfect for small or crowded areas.
- Heavy Duty Bench Vise 5" Jaws 4 1/2 by 4 1/2" Work Area ZV-02 - Heavy Duty Bench Vise 5" Jaws 4 1/2 by 4 1/2" works Area Has been painted and the paint is peeling off, New Bolt on the bottom, ( see pic) May want to clean repaint or leave natural, Weighs 38 Pounds Please email me with any questions
- 1PC DIY use 10 MM Holding Arbor For K01-50 2" Self-centering 3 Jaw Mini Chuck
- No.4 Machinists Vise 4" Jaw Opening Cast Iron ** - This item is for. Alaska are not part of the lower 48 states.
- Craftsman 4 inch Heavy-Duty Bench Vise With Swivel Base. Item 51854 - Craftsman 4 inch Heavy-Duty Bench Vise With Swivel Base. Item 51854. Condition is New. Shipped with USPS Priority Mail.
- Dad’s Work Shop Chas Parker Bench Vise No 23x Works - Could used little cleaning,Been around long time.We can ship,but wouldn’t mind pickup.
- Pana Multi-Angle Vise Products 89511
- Wilton ATV Receiver Hitch Vise for 2" Portable Vise - Wilton ATV Receiver Hitch Vise. Wilton Vise designed for use on a truck/car/atv receiver hitch(can also be bench mounted with the appropriate bracket, bracket is not included). This vise has been used very little, if at all(see photo's).
- X Y Table Milling Machine Cross Slide Drill Vise Fixture Multifunction Worktable - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- One ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Spanner
- 4" Cross Machine Vise Clamp Drill Press Vice Heavy Meta Milling Slide Machine US - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Multi-purpose Rotating Bench Vise Swival 360 Degree Cast Iron - Product Description These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face. This vise features a jaw opening scale and rotation scale. The jaw opening scale is used to approximate the jaw opening size while the rotation scale provides approximate angle readings through 180-degrees. Features Rotating jaws Rotating base Jaw opening scale Rotation scale Base locking lever .
- Vintage Wilton 2” Baby Bullet Vise Chicago, Powrarm Jr Schiller Park - POWRARM made in Schiller Park, ILL. No cracks or repairs. The upper base of the powrarm does not seem to be original, however it looks, fits and operates just fine. Vise made in Chicago, ILL. Grease was added to the parts needing it and the vise was reassembled.
- Sawyer Tool Co No. 15 Fixed Base Machinist Vise 5" Jaws 8" Open Made in USA - Size: Length: 21 in. Width: 17 in. Height: 11 in. Model: No. 15. To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly.
- Snap-on Wilton 1750 Machinist Bullet Vise Swivel Base Anvil 5” Jaws Bench Vise - Snap-on Wilton 1750 Machinist Bullet Vise Swivel Base Anvil 5” Jaws Bench Vise This vise is in good shape. Typical wear and tear. Handle is very easy to turn, no hard points. Swivels nicely and locks down securely in any position with ease. Still in good cosmetic shape and functions excellent. The jaw plates are worn and don't quite touch when the clamp is all the way in. Larger chip in one jaw plate. Snap-On nameplate has been replaced. Will be packaged securely to avoid damage in shipment.
- One ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Spanner - (Made of high quality tool steel material,high hardness, bending ability. Built in self-Release design and tools will never get stuck in holder. excluded.).
- 1PC ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Spanner - Made of high quality tool steel material,high hardness, bending ability. Built in self-Release design and tools will never get stuck in holder. 100% Money Back.
- 1PC ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Spanner - (Made of high quality tool steel material,high hardness, bending ability. Built in self-Release design and tools will never get stuck in holder. excluded.). Complicit Components.
- 4"Cross Slide Vise Drill Press Metal Milling 2 Way X- Y Heavy Duty Clamp Machine - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- GIBRALTAR Vise: Bench & Pipe Combination Swivel Vise - Bench & Pipe Combination Vise. NEW IN OPEN BOX. SEE PHOTOS. Base Motion Type Swivel. 155 Center Ct, Venice, FL 34285. Industry Recycles.
- One New ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Spanner - Made of high quality tool steel material,high hardness, bending ability. Built in self-Release design and tools will never get stuck in holder.
- 1PCS ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Spanner - Made of high quality tool steel material,high hardness, bending ability. Built in self-Release design and tools will never get stuck in holder. we very glad to solve all problem with you. Sales Policy.
- One New ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Spanner - (Made of high quality tool steel material,high hardness, bending ability. Built in self-Release design and tools will never get stuck in holder. excluded.).
- 1PC New ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Spanner - (Made of high quality tool steel material,high hardness, bending ability. Built in self-Release design and tools will never get stuck in holder. excluded.).
- 1PC New ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Spanner - Made of high quality tool steel material,high hardness, bending ability. Built in self-Release design and tools will never get stuck in holder.
- 1PCS ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Spanner - Made of high quality tool steel material,high hardness, bending ability. Built in self-Release design and tools will never get stuck in holder.
- One ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Spanner - Made of high quality tool steel material,high hardness, bending ability. Built in self-Release design and tools will never get stuck in holder.
- One ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Spanner - (Made of high quality tool steel material,high hardness, bending ability. Built in self-Release design and tools will never get stuck in holder. excluded.).
- Reed No. 205-1/2 Swivel Base Machinist Vise 5-1/2" Jaws 9" Open Made in USA - Jaw serration is worn. Model: No. 205-1/2. Size: Length: 24 in. Width: 14 in. Height: 12 in. Need it urgently?. Call us and we will do what we can to get it to you quickly. To get a freight quote we will need to know the following.
- Vintage Bench Vise Clamp Machinist 1-1/2" Jaws Made In Korea
- 4" Cross Slide Drill Press X- Y Compound Vise Bench Metal Milling Heavy Duty US - Description Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. The top and bottom cross slide vise with bi-directional movement allows easy machining of high precision and quality wood and metal parts. Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Compound Bench Table Compact Aluminum Bench Top WoodWorking Clarmp Vise 6350 - This model is even suitbale to professional using together with milling machine or bench drill. The work table is composed of several adjustable dovetail slot aluminum alloy composition, can the minimum space and ensure the accuracy.
- 4 Inch Cross Slide Drill Press Vise Heavy Duty Benchtop Compound Cross Slide - Clamping with jaws: The cross slide vise jaws are not easily broken, and the cross shaped jaws increase friction and clamping performance. The clamping force is strong, and the workpiece should not shake.
- 4" Cross Drill Press Vise Slide Metal Milling EDM 2 Way X- Y Clamp Machine Black - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Vintage heavy duty Circuit Board Vice Technical Devices Co. - Good used conditionSee all photos for complete detailsMade by Technical Devices
- Vintage JET Bench Vise 3.5" Jaws - 3-1/2" Jaws. Made in Japan.
- Unbranded Machinist Swivel Base Combination Bench Vise 4" Jaws 4" Opening - Weight (lbs, oz): 28. Need it urgently?. Call us and we will do what we can to get it to you quickly. Will there be a dock or forklift. Condition: Used. Prefer to pick it up yourself?. LOCAL PICK-UP.
- Dayton 31Lz67 3" Machine Vise With Fixed Base - It features a fully ground base that ensures precise and accurate positioning. The vise has a high precision base that ensures accuracy in all your work. With a throat depth of 1 1/4 in., this machine vise can accommodate larger pieces of work for added convenience.
- Nice! Starrett Tools 3-1/2" Bench Vise, Swivel Base, Pipe Jaws, 013-1/2 - 3-1/2" MACHINIST BENCH VISE. SWIVEL BASE. VERY GOOD USED CONDITION! THIS IS A PREVIOUSLY USED ITEM. SPECKLED BLUE PAINT.
- 4 Inch Cross Slide Drill Press Vise Heavy Duty Benchtop Compound Cross Slide - Clamping with jaws: The cross slide vise jaws are not easily broken, and the cross shaped jaws increase friction and clamping performance. The clamping force is strong, and the workpiece should not shake.
- Palmgren 4" Machine Vise Swivel Base Angle Adjustable Clean Machinist Tilting - VERY clean high end vise. Selling for a estate of a friend. Works as it should anve VERY clean and very lightly used.
- Mini Precision Mill Machine X Y Axis Bench Drill Cross Slide Vise Fixture Table - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Multi-function workbench Mini Bench Drill Fixture Vise XY-axis Slide Worktable - X -axis travel: 200mm. - The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machines. - Mini multifunctional working table, bench work table can realize the multifunction drilling and milling operation.
- GIBRALTAR Bench & Pipe Combination Vise: 5.5″ Jaw Width 6″Jaw Opening CBV045-1 - Bench & Pipe Combination Vise: 5.5″ Jaw Width 6″Jaw Opening CBV045-1. Jaw Opening Capacity 6 in. Jaw Width 5.5000. Throat Depth 3-3/4. NEW IN OPEN BOX. Item was tested and works as it should, except for requiring slight effort to swivel.
- Columbian D45 5-1/2" Swivel Base Combination Pipe Bench Vise No Jaws 6" Open - To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly. Will there be a dock or forklift. Prefer to pick it up yourself?.
- Wilton Tradesman 1765 Steel Swivel Base Bench Vise w/ 36 Inch Sledge Hammer - This general purpose bench vise is ideal for clamping down lumber, pipe, and more while you drill, saw, or fasten. Features a striking anvil for forming and shaping materials. Includes grooved steel jaw inserts.
- 4inch 100mm Swivel Base Work Shop Bench Table Top Vise Vice Clamp with 3in Anvil
- 5 inch Cross Sliding Vise High Accurate Table Drilling Machine Flat Nose Pliers - This cross vise can easily turn your drilling machine into a milling machine. Item Type: Cross Sliding Vise. 1 x Cross Sliding Vise. 2 x Vise Wrench. Jaw Size: 5in. Wide range of applications, widely used in various table drills, drilling machines, etc.
- Vise Table Top Clamp 6" Mechanic Bench Press Heavy Duty Lock Swivel Base - Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" What's in the package?.
- 6" Mechanic Bench Vise Table Top Clamp Press Locking Swivel Base Heavy Duty - Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" What's in the package?.
- 6" Mechanic Bench Vise Table Top Clamp Press Locking Swivel Base Heavy Duty - Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" What's in the package?.
- Precision 6" Lockdown CNC Vise .0004" NC/CNC Clamping Clamp For Milling Machine - Product description: Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between jaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features:.
- 6" Super-Lock CNC Vise 0.0004" for NC/CNC Milling Machines High precision - Product description: Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between jaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features:.
- 6" Super-Lock Precision CNC Vise .0004" NC/CNC Clamping Clamp Device Vising - Product description: Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between jaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features:.
- 6" Lockdown CNC Vise .0004" NC/CNC Clamping Clamp For Milling Machine Precision - Product description: Jaw Width: 6" Jaw Opening: 6" Jaw Depth: 1-1/2" Overall Length: 15" Bed Height: 2.8" Overall Height: 4.8" center distance between jaw's bolting screw: 3.8" Clamping Force: 10,000 lbs Flatness: 0.001" Accuracy: both sides square to bottom: 0.0004" Parallel to each other: 0.0008" Product features:.
- 3/4" Precision Milling Machine Bench Vise Tilting Pliers Drill Bench Vise Clamp - 3"/4" Precision Milling Machine Vise Tilting Guide Rod Angle Flat-nose Pliers Tilting Pliers Drilling Machine Bench Vise Clamp.
- 4" Cross Slide Drill press vise Metal Milling Heavy Duty Clamp Machine 2 Way X-Y - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- 2pcs 3" Aluminum Vise Jaws with Magnetic Rubber Pads Covers for Woodworking - The caps are made of aluminum alloy steel, durable to use and smooth surface.The pads are made of soft rubber, with rhombus anti-slip patterns, stable clamping and do not shake.There are embedded magnets, can be firmly attached to the jaws of the bench vise.Drawer design, easy to install and disassemble.The vise jaws can hold wood, metal, plastic, pipe and threaded objects to protect most flat, round or irregular products.Specification:Total Size: 75mm x 28.5mm x 25mm / 3" x 1.12" x 0.98" (L*W*H)Material: Aluminum Alloy Steel, RubberColor: Silver Tone, BlackPackage Content:1 Pair (2 Pcs) x Magnetic Vise Jaws.
- WILTON Bench Vise: 6″ Jaw Width, 6″ Jaw Opening, 3″ Throat Depth 11106 - Bench Vise. Jaw Opening Capacity 6.0000 in. Jaw Width 6.0000 in. Throat Depth 3.0000 in. This item appears to be new and in good condition. There is slight surface rust as shown in the pictures. SOLD AS IS.
- Vintage Bench Vise 3.5" Jaws w/ Swivel Base - The vise weighs 7lbs 13oz. 3-1/2" Jaws in good condition. Swivel base.
- 4" Cross Machine Vise Clamp Drill Press Vice Heavy Meta Milling Slide Machine US - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Goehners 2 In 1 Heavy Duty Bench Vise Table Swivel Clamping Tools - With a swivel base motion type, this vise allows for versatile clamping options and easy access to your workpiece.
- 3”/4” Precision Milling Machine Vise Tilting Guide Rod Angle Flat-nose Pliers - 3"/4" Precision Milling Machine Vise Tilting Guide Rod Angle Flat-nose Pliers Tilting Pliers Drilling Machine Bench Vise Clamp.
- Sanou Mini 3 Jaw K01-63 2.5" 63mm M14 Reversable Self-Centering Jaws Lathe Chuck - (K01-63 2.5" 63mm Chuck 1pcs. excluded.).
- K01-63 2.5" 63mm 3 Jaw Mini Lathe Chuck Self Centering M14 Reversible Jaws - K01-63 2.5" 63mm Chuck 1pcs.
- K01-63 2.5" 63mm 3 Jaw Mini Lathe Chuck Self Centering M14 Reversible Jaws - K01-63 2.5" 63mm Chuck 1pcs.
- Sanou Mini 3 Jaw K01-63 2.5" 63mm M14 Reversable Self-Centering Jaws Lathe Chuck - (K01-63 2.5" 63mm Chuck 1pcs. excluded.).
- 2.5" 63mm 3 Jaw K01-63 Mini Lathe Chuck Self Centering M14 Reversible Jaws - (K01-63 2.5" 63mm Chuck 1pcs. excluded.).
- 2.5" 63mm 3 Jaw K01-63 Mini Lathe Chuck Self Centering M14 Reversible Jaws - K01-63 2.5" 63mm Chuck 1pcs.
- Sanou Mini 3 Jaw 2.5" 63mm M14 Reversable Self-Centering Jaws Lathe Chuck K01-63 - K01-63 2.5" 63mm Chuck 1pcs.
- Sanou Mini 3 Jaw 2.5" 63mm M14 Reversable Self-Centering Jaws Lathe Chuck K01-63 - K01-63 2.5" 63mm Chuck 1pcs.
- Heavy Duty 4" Cross Slide Drill Press X- Y Compound Vise Bench Metal Milling USA - Description Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. The top and bottom cross slide vise with bi-directional movement allows easy machining of high precision and quality wood and metal parts. Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Morgan Chicago 45 Machinist Combination Bench Vise 4-1/2" Jaws 6-1/2" Opening - Weight (lbs, oz): 56. Need it urgently?. Call us and we will do what we can to get it to you quickly. Warehouse Location: F0033. Condition: Used. Prefer to pick it up yourself?. LOCAL PICK-UP. Will there be a dock or forklift.
- Machinist Swivel Base Combination Bench Vise 4" Jaws 5" Opening - Missing One Tightener For The Swivel Base. Weight (lbs, oz): 25. Need it urgently?. Call us and we will do what we can to get it to you quickly. Will there be a dock or forklift. Prefer to pick it up yourself?.
- Vtg Craftsman Swivel Vise 3 5/8" Jaw # 506-51801 Pipe Jaws Red USA Opens to 4.5" - Wear as expected to paint finish. Fully functional.
- Lewis Tool Co. No. 14 5" Jaw 10" Open Twin Bar Open Screw Vintage Swivel Vise - Lewis Tool Co. Prefer to pick it up yourself?. Complete and in good condition, Screw turns freely, little wobble but not wore out. Size: Length: 26 in. Width: 20 in. Height: 14 in. Model: No. 14.
- Mini Precision Mill Machine Worktable Bench Drill Cross Slide Vise Fixture Table - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Morgan Chicago 140 4" Jaw 6" Open Swivel Base Bench Vise - Need it urgently?. Call us and we will do what we can to get it to you quickly. To get a freight quote we will need to know the following Prefer to pick it up yourself?. Will there be a dock or forklift.
- Vintage Small Portable Vacu Vise by General 4" tall x 4 1/4" Wide Base USA - Used vintage small vice, very well made. Made in the USA. Sold as is.
- Wilton General Purpose Bench Vise, 4" Jaw Width, 3" Max Opening (11104) - Item model number 11104. The Wilton 11104 bench vise boasts a 4" jaw width, double lockdowns, and large anvil. This bench vise is backed by Wilton. SECURE GRIP: Hardened steel replaceable jaw inserts are machine serrated for a safe and secure grip under maximum torque.
- Milling Machine Work Table Cross X-Y Slide Bench Drill Press Vise Table USA - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Wilton 4-Inch Swivel Base Bench Vise with Pipe Clamp & Jaw Savers (Made In USA) - Sold as pictured. No owner marks.
- NEW RIDGID Chain Replacement Part for Bench Chain Vise (T)... - Not much look at all photos. this item is 2' long and is 1"center of pin. to center of pin. Links are 1/2" wide.
- Wilton Tradesman 1765 6.5 Inch Jaw Width Steel Swivel Base Anvil Work Bench Vise - This general purpose bench vise is ideal for clamping down lumber, pipe, and more while you drill, saw, or fasten. Model Tradesman. Outdoor Recreation. Exercise & Fitness. Features a striking anvil for forming and shaping materials.
- Dayton 4Cpg3 6" Machine Vise With Fixed Base - The quick release type makes it easy to switch between different vises and other tools quickly. Zoro Select 4Ugu9 Foil Roll,Copper,0.021 Th X 4 In W,50 Ft. Westward 45Kg87 Impact Socket Adapter Set, 1/4 In, 3/8 In, 1/2 In, 3/4 In, 1 In.
- ER25UM Type Clamping Nut And Wrench CNC Milling Lathe Spanner Precision
- 1PCS ER25UM Type Clamping Nut And Wrench CNC Milling Lathe Spanner Precision
- ONE Clamping Nut And Wrench CNC Milling Lathe Spanner ER25UM Type
- ONE Clamping Nut And Wrench CNC Milling Lathe Spanner ER25UM Type
- 1PCS Clamping Nut And Wrench CNC Milling Lathe Spanner ER25UM Type
- ONE NEW Clamping Nut And Wrench CNC Milling Lathe Spanner ER25UM Type
- 1PC Clamping Nut And Wrench CNC Milling Lathe Spanner ER25UM Type NEW - We very glad to solve all problem with you.
- 1PCS NEW Clamping Nut And Wrench CNC Milling Lathe Spanner ER25UM Type - Size:As Picture.
- ONE Clamping Nut And Wrench CNC Milling Lathe Spanner ER25UM Type NEW
- Vintage Hollands 401 Bench Mount Pipe Vise 2-1/2" ~ Erie PA USA - Model 401. Pipe Capacity 2-1/2". Made in USA.
- Work Table X Y Axis Bench Drill Press Vise Cross Slide Fixture Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Unbranded Bench Swivel Base Vise Oal 18-1/2" 8-1/8" Jaw Width - BENCH SWIVEL BASE VISE. OAL 18-1/2". 8-1/8" JAW WIDTH.
- 4" HORIZONTAL/VERTICAL Bison Round Stock Vise - The Tooling Emporium is located in downtown Louisville KY. We have a very large inventory of tooling. We do not have everything listed as we are always receiving new inventory.
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- Bench Drill Press Vise Fixture Milling Machine Mini Compound Working Table NEW - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- DAYTON 4CPF9 6" Machine Vise with Swivel Base - Machine Vise, Rotary Jaw Milling, Swivel Base, Jaw Width (In.) 6 in, Jaw Opening (In.) 6 in, Throat Depth (In.) 1 27/32 in, Overall Length (In.) 18.47, Overall Height (In.) 5.87, Clamping Force (Lb.) -, Jaw Deflection 0.006 in Per 4 in At 33 lb Load On Hand Crank, Jaw Plate Square To 0.0012 in per 4 in, Bed/Base Parallel To 0.0012 in.
- 6" Cross Drill Press Vise Slide Metal Milling 2 Way X-Y Clamp Machine Heavy Duty - This 6" vise clamp machine will easily turn your drill press into a milling machine! 1 Vise Clamp Machine. Jaw Depth: 4cm/ 2in. Jaw Width: 15.3cm/ 6in. Applicable Objects: Water Pump, Pipe, Steel Wire, Clamp Table.
- 4Jaw Lathe Chuck 125mm Self Centering 5" for CNC Drilling Milling Lathe - (1 x 125MM 4 Jaw Lathe Chuck. Model 4 jaw Self Centering Scroll Lathe Chucks. level of protection IP65. excluded.).
- ONE NEW 4Jaw Lathe Chuck 125mm Self Centering 5" for CNC Drilling Milling Lathe - 1 x 125MM 4 Jaw Lathe Chuck. Model 4 jaw Self Centering Scroll Lathe Chucks.
- 1PC 4Jaw Lathe Chuck 125mm Self Centering 5" for CNC Drilling Milling Lathe NEW - 1 x 125MM 4 Jaw Lathe Chuck. Model 4 jaw Self Centering Scroll Lathe Chucks. we very glad to solve all problem with you. However, we will try our best to minimize it. material TOP QUALITY Hardened Steel.
- 1PCS NEW 4Jaw Lathe Chuck 125mm Self Centering 5" for CNC Drilling Milling Lathe - 1 x 125MM 4 Jaw Lathe Chuck. Model 4 jaw Self Centering Scroll Lathe Chucks. However, we will try our best to minimize it. Easy & Secure. 100% Money Back.
- Heavy duty Bench vise swivel 5in blue - 5 in swivel heavy duty work bench vise blue. See pictures.
- 250mm 3Jaw Lathe Chuck 10In Self-Centering for CNC Drilling Milling Lathe - (1 x 3 Jaw Lathe Chuck. 3 jaw Self Centering Scroll Lathe Chucks. level of protection. international standard. Products Standard. TOP QUALITY Hardened Steel. excluded.).
- 6"Cross Vise 2Way Slide Press Milling X-Y Clamp Machine Bench Vise Clamp Tables - This 6" vise clamp machine will easily turn your drill press into a milling machine! 1 Vise Clamp Machine. Jaw Depth: 4cm/ 2in. Jaw Width: 15.3cm/ 6in. Applicable Objects: Water Pump, Pipe, Steel Wire, Clamp Table.
- HFS(R) 5" Heavy Duty Bench Vise Anvil Forged 360 Swivel Locking Base - HFS (R) 5" Heavy Duty Bench Vise Anvil Forged, 360 Swivel Locking Base, Multi-Purpose Vise. The HFS (R) Heavy Duty Bench Vise is a heavy-duty tool designed to handle a wide range of projects. Made of durable cast steel, this vise features parallel jaws and a head that swivels 360 degrees, as well as full 360-degree rotational jaws.
- HFS(R) Multi-Purpose Rotating Bench Vise - Heavy Duty - Locking Base (4IN) - The HFS (R) Multi-Purpose Rotating Bench Vise is a heavy-duty tool designed to handle a wide range of projects. Made of durable cast steel, this vise features parallel jaws and a head that swivels 360 degrees, as well as full 360-degree rotational jaws.
- Heavy Duty Bench Metal Milling X- Y Compound Vise 4" Cross Slide Drill Press US - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Aluminum Soft Jaws - Fits 5 Inch Wlilton 1750 Bench Vise And Others. - Pair of new aluminum smooth face soft jaws with 4 screws and an Allen wrench to install.
- SPEED JAW 93168 Vise Jaws, 5", Steel Jaw - Speed Jaw,5 In.,Steel Jaw.
- 8" Aluminum Vise Jaws with Magnetic Rubber Pads Covers for Woodworking - The caps are made of aluminum alloy steel, durable to use and smooth surface.The pads are made of soft rubber, with rhombus anti-slip patterns, stable clamping and do not shake.There are embedded magnets, can be firmly attached to the jaws of the bench vise.Drawer design, easy to install and disassemble.The vise jaws can hold wood, metal, plastic, pipe and threaded objects to protect most flat, round or irregular products.Specification:Total Size: 200mm x 28.5mm x 25mm / 8" x 1.12" x 0.98" (L*W*H)Material: Aluminum Alloy Steel, RubberColor: Silver Tone, BlackPackage Content:1 Pair (2 Pcs) x Magnetic Vise Jaws.
- Machinist Bench Production 6” Vise 6SV
- Dayton 6Z845 6" Machine Vise With Fixed Base - Machine Vise, Quick Release, Fixed Base, Jaw Width (In.). 6 in, Jaw Opening (In.). 6 5/8 in, Throat Depth (In.). Zoro Select 11004375 Screw Machine Drill Bit, 7/16 In Size, 118 Degrees Point. West Chester Protective Gear 3511/M Disposable Lab Coat,M,Pp,22G,Pk30.
- 3/4" Precision Milling Machine Bench Vise Tilting Pliers Drill Bench Vise Clamp - 3"/4" Precision Milling Machine Vise Tilting Guide Rod Angle Flat-nose Pliers Tilting Pliers Drilling Machine Bench Vise Clamp.
- Palmgren 9629745 5" Standard Duty Combination Vise With Swivel Base - & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial. Occunomix Sn530 Liner-Hard Hat Cotton Shell Fl.
- 0-90 degree tilt guide rod angle flat nose pliers tilt drill press bench vise 4# - 0-90 Degree Tilting Guide Rod Angle Flat Nose Pliers Tilt Guide Angle Pliers Tilt Drill Press Bench Vise Clamp.
- 3.3'' Bench Vise Adjustment Dual-purpose Heavy Duty Cast Steel with Swivel Base - Description: One-second Quick Clamping Special screw groove design, press the quick release button, push the jaws to quickly position and clamp, no need to turn the screw to move slowly, and the machining accuracy will not deviate. Dual-purpose Combination Our bench vise can be fixed on the desktop with screws or directly clamped on the workbench, which is suitable for more working scenes.Base clamping range increased to 4 inch(103mm), suitable for workbenches of various thicknesses..
- Bench Vise 3.3'' Adjustment Dual-purpose Heavy Duty Cast Steel with Swivel Base - Description:.
- Bench Vise Adjustment Dual-purpose Heavy Duty Cast Steel 3.3'' with Swivel Base - Description:.
- 3.3 inch Quick Adjustment Home Universal Bench Vise with Swivel Base - Description:.
- Quick Adjustment Home Universal Bench Vise 3.3 Inch with Swivel Base - Description:.
- For Workbench 3.3" Multi-Functional Portable 360° Swivel Base 2-In-1 Bench Vise - Description:.
- Home Bench Vise with Clamp Post Universal Bench Clamps 360° Swivel Base 3 Inch - Description:.
- Wilton 4 1/2 In. Swivel Vise Has Repair Broken Tab On Base See Photo Description - THE VISE WAS OBVIOUSLY REPAIRED, AND APPEARS TO BE IN GOOD WORKING CONDITION. SWIVELS, LOCKS, TIGHTENS, LOOSENS, ETC. jAWS ARE PRETTY STRAIGHT, AS A LOT OF WORK WENT INTO THE REPAIR. ONE MOUNTING TAB IS BROKEN OFF OF BASE. MAY BE A CHIP AROUND THE REPAIR AREA AS SHOWN. IF YOU WANT A QUALITY VISE FOR YOUR SHOP WITHOUT PAYING A FORTUNE, THIS MAY BE A GOOD CHOICE. NOT SURE IF THE VISE CAN BE RESTORED TO ORIGINAL, SELLING AS IS, AS SHOWN.
- Wilton Sbv-100 4" Light Duty Combination Vise With Swivel Base - Combination Vise. Storm Interface 720 Tfxi 16 Key Industrial Illum Keypad,16 Key,Ip65. Ampco Safety Tools W-290 1/2" Drive Socket Set, Sae, 9 Pcs. Senco 08D300w Deck Screw, #8 X 2-13/16 In, Steel Flat Head Square Drive, 800 Pk.
- Milling Machine Cross Slide X Y Axis Bench Fixture Work Table Drill Press Vise - This milling machine table is made of high-quality aluminum alloy, which is strong and durable. 1 Milling Machine Table. Firm Clamping: the Milling Machine Table Is Designed with a T-notch, Which Can Increase the Friction of the Table and Improve the Clamping Force.
- Westward 10D708 4" Standard Duty Combination Vise With Swivel Base - Smc Kq2l13-04As Union Elbow,90 Deg,1/2 In,Tubexmale Bspt. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
- Larin 4 In Bench Vise, Swivel -Anvil GREAT CONDITION, FAST SHIPPING, - Please view the photos for the description and the condition for what you will be receiving. This vice will be shipped in a medium flat rate box priority. The cost is $17.05. Floor
- Work Table X Y Axis Bench Drill Press Vise Cross Slide Fixture Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- 4in Cross Slide Vise Drill Press Metal Milling 2Way X-Y Heavy Duty Clamp Machine - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- 4"Cross Slide Vise Drill Press Metal Milling 2 Way X- Y Heavy Duty Clamp Machine - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Yost Bench Table Swivel Vise 3" RED Holland Michigan USA - For sale is a used Yost 3" bench swivel vise. The vise opens to about 5".
- Wilton 1755 Combination Vise,Swivel,Heavy Duty - & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial. Brady M6-11-417 Label,Vinyl,Matte,1/2" W.
- Ridgid BC4A Bench Chain Vise 40180. BC-4A BC-4 A - See photos for details of the item. Please let me know if you have any questions or want more photos.
- Westward 10D711 5-1/2" Standard Duty Combination Vise With Swivel Base - & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial. Nu-Calgon 4180-53 Leak Detector.
- Dayton 31Lz65 4" Machine Vise With Fixed Base - The machine vise has a jaw width of 4 in., making it ideal for smaller workpieces. This model also features a fixed base, which provides you with a sturdy grip on your workpiece. It has a maximum capacity of 33 lb.
- WILTON 745 5" Combination Vise with Swivel Base a-x - What is shown in the pictures is what is included with the item. Fares Pawn.
- 4" Heavy Duty Cross Drill Press Vise 2-Way X-Y Slide Metal Milling Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- MiniTable Vise Aluminum Alloy Be nch Vice Swivel Lock Clamp Craft Hobby Cast #u - 1 x Table Vise. This is a cast aluminum vice that has a swivel lock action that holds the vice firmly to the table. Jaw opening: 30 mm Max. Jaw width: 40 mm. Fixed clamp: 35mm Max. Material: Aluminum alloy.
- Airlox Pneumatic Model X Vise Made In Whitehall Ny - AIRLOX PNEUMATIC MODEL X VISE. For sale is an Airlox pneumatic vise. This vise was made in Whitehall NY. The jaw width is roughly 3" x 2" tall.
- MiniTable Vise Aluminum Alloy Be nch Vice Swivel Lock Clamp Craft Hobby Cast #ur - 1 x Table Vise. This is a cast aluminum vice that has a swivel lock action that holds the vice firmly to the table. Jaw opening: 30 mm Max. Jaw width: 40 mm. Fixed clamp: 35mm Max. Material: Aluminum alloy.
- Bench Clamp Quick Release Drill Press Vice Tube And Rod Approx. 9in X 4.5in - This vise is made of sturdy aluminum with a durable ABS handle. This vise has long bench mount openings on each side to enable it to slide to the desired position under your This vise is made of sturdy aluminum with a durable ABS handle.
- Armstrong Small Pipe Vise For Bench/Truck Mount - Armstrong Small Pipe Vise For Bench/Truck Mount. Condition is Used. Shipped with Flat Rate Freight.
- Vice, MULTI ANGLE, 76.2MM, Vice Bench 1-83-069 - VICE, MULTI ANGLE, 76.2MM Jaw Width: 3" Jaw Opening Max: 3" SVHC: No SVHC (15-Jun-2015) Material: Cast Aluminiuim Vice Jaw Opening Max: 75mm Vice Type: Bench.
- Vintage AMERICAN SCALE CO. Bench Vise 3.5" Jaws No. 35 - 3-1/2" Jaws in good condition. Good working condition.
- Stevens 6” Machinist Bench Vise - See all pictures for the best description. It opens up to approximately 5”. It scrolls nice and smoothly, but DOES NOT close all the way, it closes with a 3/4” gap, as seen in the last picture. Check out my other listings as well. Thank you for looking
- Lassey rapid lox drill press vise, Inv 45949 - 6" max opening. Not What You Were Looking For?.
- Te-Co Machinist vise, Inv 45948 - Not What You Were Looking For?. missing handle.
- 4" Cross Drill Vise Press Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- MINI TABLETOP SUCTION VISE, 25MM, Vice Bench PD-372 - MINI TABLETOP SUCTION VISE, 25MM Jaw Opening Max: 25mm SVHC: No SVHC (27-Jun-2018).
- Vice, TABLE SWIVEL, 60MM, Vice Bench, Qty.1 D00099 - VICE, TABLE SWIVEL, 60MM Jaw Width: 60mm Jaw Opening Max: 60mm Vice Jaw Opening Max: 60mm Weight: 2.3kg.
- MINI Bench Vice, ALUM ALLOY, 30MM, 40MM, Vice Bench MP007098 - MINI BENCH VICE, ALUM ALLOY, 30MM, 40MM.
- MINI Vice, 30MM, NYLON GRIP, Vice Bench MP002090 - MINI VICE, 30MM, NYLON GRIP.
- HFS(R) 10.5 Inch Heavy Duty Front Screw Woodworking Bench Vise for Workbench - Made of high-quality steel with an electrostatic spraying surface, this vise is built to last and reduce wear and tear. The vise nut can be disengaged by pulling up on the handle, and the jaws can be adjusted to the appropriate opening by turning the main handle.
- SUBURBAN 9204 Bench Center, 17-3/4inL, 5" W, 5-5/8" H - This SUBURBAN 9204 Bench Center is the perfect solution for your workbench. You will be able to securely clamp materials in place while you work on them. The bench center is a combination of a fixed and swivel vise, which allows you to use it in both horizontal and vertical positions. It has a 1/2" x 60 degrees center style that provides more accurate positioning than standard centers. The overall height of 5 5/8" ensures you can easily access the vise from any angle. Its squareness tolerance of +/-0.0003 in / 6 in means it is very accurate when working with smaller pieces or when performing intricate jobs. This SUBURBAN 9204 Bench Center will help you complete even the most difficult tasks with ease and accuracy..
- SUBURBAN 9203 Bench Center, 12-1/4" L, 3-1/2" W, 3-5/8" H - Item Bench Center, Bench Center Style Cylindrical Shaft, Includes Moveable Column No, Operating Position Horizontal, Vertical, Working Diameter 3 in, Maximum Working Length 8 in, Head and Tailstock Material Alloy Steel, Locking Mechanism Knurled Knob, Overall Height 3 5/8 in, Overall Width 3 1/2 in, Parallelism +/-0.002 in, Shaft Material Steel, Squareness +/-0.0003 in / 6 in.
- PALMGREN 9618401 4" Light Duty Machine Vise with - Machine Vise, Machine Vise, Jaw Width (In.) 4 in, Jaw Opening (In.) 4 in, Throat Depth (In.) 1 3/4 in, Overall Length (In.) 12-1/8, Overall Height (In.) 3-3/8, Clamping Force (Lb.) -, Jaw Deflection .0.002 in At 4000 lbs, Jaw Plate 0.002 in, Bed/Base 0.001 in, Standard Milling Machine Vise.
- NEW Panavise 201 1" Light Duty Multi-Angle Vise With Stationary Base
- 4in Cross Drill Press Vise Slide Metal Milling EDM 2 Way X-Y Clamp Machine Black - Key Features High-quality Material: Our cross slide vise is made of high-quality cast iron. The pressure and wear-resistant cast iron make this product strong and durable. Strong Clamping Force: The jaws are made of strong carbon steel. The high hardness and toughness of the carbon steel provide the product with a strong clamping force. And the jaws are widened and raised, which makes the clamping more stable. Easy to Adjust: The top and bottom rails are equipped with 6 screws for easy adjustment as needed. You only need to use a wrench to adjust the screws, which is very convenient and labor-saving. Detachable Design: The jaws are detachable, allowing for quick and easy replacement. And the removable jaws allow you not to replace the entire product, greatly reducing costs. .
- Wilton Tradesman 1765 Steel Anvil Bench Vise w/ Unbreakable Handle Sledge Hammer - This general purpose bench vise is ideal for clamping down lumber, pipe, and more while you drill, saw, or fasten. Features a striking anvil for forming and shaping materials. Includes grooved steel jaw inserts.
- 4 " Copper Soft Jaws Fits Wilton bench Vise 1740, Cadet and Others. - These jaws only fit the Wilton vises listed below. Weight is approx.
- PALMGREN 9629745 Combination Vise With Swivel Base - Jaw Face Type. Max Jaw Opening. Jaw Face Width. Jaw Pad Material. Includes Pipe Jaw. Spindle Type. Combination Vise. Base Swivel Angle.
- 6 inch Milling Machine Vise Tilting and Swiveling 0-90° Vice with Base Bench - 1 set 6" Tilting and Swiveling Milling Vise (290024). Hope for your understanding. ▲ 6 months' warranty for the machines, not for the consumables.
- Bridgeport 6" Milling Machine Vise W/Swivel Base 5-1/8" Open - Prefer to pick it up yourself?. Unless otherwise specifically agreed to in writing by. Need it urgently?. Call us and we will do what we can to get it to you quickly. To get a freight quote we will need to know the following.
- Dayton 4Yg28 3" Machine Vise With Fixed Base - Machine Vise, Cross Vise, Fixed Base, Jaw Width (In.). 3 in, Jaw Opening (In.). 3 in, Throat Depth (In.). 1 1/8 in, Overall Length (In.). 11 in, Overall Height (In.). 5-1/2 in, Max. Travel 5 in in Both X and Y Directions, Jaw Deflection 0.002 in @ 2000 lbs, Cross and Longitudinal Handle Rotates Above Machine Table Surface.
- Home Bench Vise with Clamp Post Universal 3 Inch Bench Clamps 360° Swivel Base - Description:.
- Home Bench Vise with Clamp Post Universal Bench Clamps 360° Swivel Base 3'' - Description:.
- Home Bench Vise with Clamp Post Universal 3'' Bench Clamps 360° Swivel Base - Description:.
- Panavise 209 1" Light Duty Multi-Angle Vise With Suction Cup Base - It has a suction cup base, which provides added stability. The multi-angle vise has a jaw face that is grooved to provide better grip on your workpiece. This light duty bench vise has a throat depth of 2", and can hold objects up to 2-7/8" wide.
- ONE 10 MM Holding Arbor Fit For K01-50 2" Self-centering 3 Jaw Mini Chuck NEW
- Wilton 1780A Combination Vise,Swivel,Heavy Duty 8 INCH JAW - Fully enclosed spindle and nut increases the life of the vise. Wilton 28808 Features. Wilton 28808 Specifications. 360° swivel base with double lockdowns.
- Palmgren 9618402 4" Light Duty Machine Vise With Swivel Base - If you are looking for a machine vise that is light duty, the Palmgren 410B 4" Light Duty Machine Vise with Swivel Base is an excellent choice. This standard milling machine vise features a swivel base and a standard body.
- 4" Metal Cross Slide Drill Press X-Y Compound Bench Vise Set Milling Clamping US - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in Package Included 1* Cross Slide Vise All Accessories Needed for Installation.
- X-Y 2 Way Heavy Duty Clamping Vise 4" Cross Slide Vise Drill Press Metal Milling - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Clamping Nut And Wrench CNC Milling Lathe Spanner Precision ER25UM Type
- 4" 2 Way X-Y Cross Slide Vise Drill Press Metal Milling Clamping Heavy Duty Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Craftsman Operator Manual for Standard Vise Model Nos. 351.240710, 730,750,770 - Craftsman operators manual for Standard Vise Model Nos. 351.240710, 730,750,770.
- Vintage Brink & Cotton B&C Woodworkers 6.5" Wide Bench Vise Model 176 Used - Jaws line up as they should. No cracks or visible defects.
- Vintage Milling Machine Swivel Vise 12" Jaws 14" Open Capacity - Weighs roughly 175lbs so will have to pick up or arrange a freight shipment. No handle included. Opens/closes just fine.
- Vice HEAD, CIRCUIT BOARD HOLDER, 315, Vice Bench 315 - VICE HEAD, CIRCUIT BOARD HOLDER, 315 Jaw Width: 304.8mm Jaw Opening Max: 304.8mm Product Range: Panavise Vice Heads Vice Type: Bench.
- Vice SYSTEM, VACUUM BASE, 209, Vice Bench 209 - VICE SYSTEM, VACUUM BASE, 209 Jaw Width: 25.4mm Jaw Opening Max: 73mm Product Range: Panavise Vice Systems.
- Vice SYSTEM, JUNIOR MODEL, 201, Vice Bench 201 - VICE SYSTEM, JUNIOR MODEL, 201 Jaw Width: 25.4mm Jaw Opening Max: 73mm Product Range: Panavise Vice Systems.
- Westward 10D710 4-1/2" Standard Duty Combination Vise With Swivel Base - When you need to work on precision tasks, the Westward 10D710 4-1/2" Standard Duty Combination Vise is the tool for you. It features a large anvil surface and has a 1/8" to 1-1/2" pipe capacity. Its cast iron body ensures that it will last through years of use.
- 1PCS NEW 250mm 3Jaw Lathe Chuck 10In Self-Centering for Drilling Milling Lathe - 1 x 3 Jaw Lathe Chuck. 3 jaw Self Centering Scroll Lathe Chucks.
- 1PC 250mm 3Jaw Lathe Chuck 10In Self-Centering for Drilling Milling Lathe NEW - 1 x 3 Jaw Lathe Chuck. 3 jaw Self Centering Scroll Lathe Chucks. However, we will try our best to minimize it. TOP QUALITY Hardened Steel. AU Automation Mall.
- YOST VISES Bench & Pipe Combination Vise: 4″ Jaw Width & Opening 904-HV - Jaw Opening Capacity 4 in. Jaw Width 4.0000. Pipe Jaw Included Yes. Jaw Face Serrated. Features Replaceable Jaw; Structural Construction. Throat Depth 2-1/4. Swivel Angle 360. Material Steel.
- Small Vintage Mercury Bench Vise With Anvil 2 1/2” Jaws - Small Vintage Mercury Bench Vise With Anvil 2 1/2” Jaws. In good condition for its age. Workers good, jaws open and close smoothly. Has some wear to jaws. Unsure or exact date made. Please see photos for details.
- Dayton 4Cpg2 4" Machine Vise With Fixed Base - Machine Vise, Quick Release, Fixed Base, Jaw Width (In.). 4 1/2 in, Jaw Opening (In.). 4 3/4 in, Throat Depth (In.). 1 7/8 in, Overall Length (In.). 12.48, Overall Height (In.). 3.23, Clamping Force (Lb.).
- 4" Cross Slide Drill press vise Metal Milling Heavy Duty Clamp Machine 2 Way X-Y - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Clamp-On Vise Bench Clamp, Work Bench Vise for Drilling Woodworking Metalworking - Model: DIY Jaw Bench Clamp. 1 x DIY Jaw Bench Clamp. Maximum Jaw Opening: Approx 30mm. - Multi hole, free to install, machine assisted fixing, will not hurt fingers. - Lightweight, compact and portable, does not take up too much space.
- Wilton 28825 (C0) Combination Pipe/Bench Vises
- Westward 10D733 6" Drill Press Vise With Stationary Base - If you need a drill press vise that provides accurate positioning, the Westward 10D733 is what you need. The machine vise has a cross slide that provides quick and precise positioning along the X and Y axis.
- Dayton 3W761 4" Machine Vise With Fixed Base - Machine Vise, Drill Press Vise, Fixed Base, Jaw Width (In.). 4 in, Jaw Opening (In.). 4 in, Throat Depth (In.). 1 1/2 in, Overall Length (In.). 9-3/8, Overall Height (In.). 2-3/4, Jaw Deflection 0.002 in @ 2000 lbs, Jaw Plate Square to 0.002 in, Bed/Base Parallel to 0.001 in, Can Be Turned on Either Side or Set on End for Use.
- Dayton 6Z844 4" Machine Vise With Trunnion Base - The jaws can be set from 0 degrees to 90 degrees and feature a square jaw plate that makes it easy to hold materials. This machine vise has an angle base, which allows you to position it at any angle from 0 degrees to 90 degrees.
- Universal Rotate 360° Work Clamp-On Bench Vise with Quick Adjustment 3.3" black - Description:.
- Universal Rotate 360° Work Bench Vise 3.3 inch with Quick Adjustment Black - Description:.
- 3.3 inch Universal Rotate 360° Work Bench Vise with Quick Adjustment Black - Description: DUAL-PURPOSE COMBINATION This vise can be screwed firmly to the workbench or table with screws, it can also be conveniently clamped on the workbench as well. Base clamping range increases to 4 inch(100mm) , suitable for workbenches of various thicknesses, which is designed for home, workshop, professional use, general purpose and light work. ONE-CLICK POSITION Press on the quick release button, and push the jaws together to be quick position and clamp, no need to turn the screw to move slowly. The product adds the locking function, so you can use safely. Don't have to worry about the sliding jaws on the threaded spindle fall off..
- 3.3 INCH Universal Rotate 360° Work Bench Vise with Quick Adjustment Black - Description:.
- Cross Slide 4" Vise Drill Press Metal Milling X-Y 2 Way Clamping Vise Heavy Duty - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- ONE NEW 10 MM Holding Arbor Fit For K01-50 2" Self-centering 3 Jaw Mini Chuck
- ONE 10 MM Holding Arbor Fit For K01-50 2" Self-centering 3 Jaw Mini Chuck NEW
- DIY use 10 MM Holding Arbor Fit For K01-50 2" Self-centering 3 Jaw Mini Chuck
- 1PCS 10 MM Holding Arbor Fit For K01-50 2" Self-centering 3 Jaw Mini Chuck NEW
- 1PC DIY use 10 MM Holding Arbor For K01-50 2" Self-centering 3 Jaw Mini Chuck
- ONE 10 MM Holding Arbor Fit For K01-50 2" Self-centering 3 Jaw Mini Chuck NEW
- 1PCS 10 MM Holding Arbor Fit For K01-50 2" Self-centering 3 Jaw Mini Chuck NEW
- DIY use 10 MM Holding Arbor Fit For K01-50 2" Self-centering 3 Jaw Mini Chuck
- 6 Inch Bench Vise Vice Shop Equipment Mechanics Tool Garage Workbench - Adjustable vise jaws can clamp the objects in different sizes tightly. 1x Bench vise. Clamp height :65MM. Material: 45#Steel+cast iron. 360 degree Swivel Locking base ideal for turning in any direction as desire after mounting.
- Vintage WILTON 4" Red Vise with Swivel Base 121072 121070 Made in USA - Note the swivel base lever has been replaced by a nut and bolt.
- Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Vice 4Inch - This 4" vise is the best quality bench vise for DIY jobs. If it operates normally, it can be used for life. Install the vise on the workbench to complete the work of clamping and fixing. 360 degree Rotatable: With two locking jaws, the base of the bench vise can be rotated up to 360 degree.
- Pliers Drill Bench Vise Clamp 3/4" Precision Milling Machine Bench Vise Tilting - 3"/4" Precision Milling Machine Vise Tilting Guide Rod Angle Flat-nose Pliers Tilting Pliers Drilling Machine Bench Vise Clamp.
- Wilton 11106 5 In Max Jaw Opening Combination Vise - This is a Wilton combination vise. Item Combination Vise. We have inspected this item and the jaw opens/closes. We do not have the capability to test the unit any further. Jaw Opening - Maximum 5 in.
- Dayton 4Tk05 4" Machine Vise With Fixed Base - Machine Vise, Quick Release, Fixed Base, Jaw Width (In.). 4 in, Jaw Opening (In.). 4 in, Throat Depth (In.). 1 1/2 in, Overall Length (In.). 13 in, Overall Height (In.). 3-1/2 in, Clamping Force (Lb.).
- 3/4" Precision Milling Machine Bench Vise Tilting Pliers Drill Bench Vise Clamp - 3"/4" Precision Milling Machine Vise Tilting Guide Rod Angle Flat-nose Pliers Tilting Pliers Drilling Machine Bench Vise Clamp.
- Panavise 301 2-1/2" Light Duty Multi-Angle Vise With Stationary Base USED - Panavise 301 2-1/2" Light Duty Multi-Angle Vise With Stationary Base USED. Condition is Used. Shipped with UPS Ground.
- Dayton 4Cpe9 6" Machine Vise With Swivel Base - Its jaws are 6 in. wide and can open up to a maximum of 6 in. The machine vise has jaws that are 6 in. wide and an opening of 6 in., with a throat depth of 1 3/4 in. Zoro Select M24540.020.0004 M2-0.40 X 4 Mm Slotted Flat Machine Screw, Zinc.
- Dayton 31Lz64 3" Machine Vise With Fixed Base - Machine Vise, Uni-Grip, Fixed Base, Jaw Width (In.). 3 in, Jaw Opening (In.). 2 3/4 in, Throat Depth (In.). 1 1/4 in, Overall Length (In.). 9, Overall Height (In.). 2-1/2, Clamping Force (Lb.). Zoro Select 20Tm37 Swivel Stem Castr,Polyurthan,5 In,300 Lb.
- Westward 10D749 3" Drill Press Vise With Angle With Stationary Base - When you're looking for a durable machine vise, the Westward 10D749 3" Drill Press Vise with Angle is just what you need. The machined aluminum construction provides superior strength and long-lasting durability.
- Dayton 3W764 6" Machine Vise With Swivel Base - This bench vise features a swivel base, which allows you to use it in any position without affecting the accuracy of your work. Light Industrial. & Recepticles. Electrical Outlets. and Enclosures. Electrical Boxes.
- 1PCS NEW 4Jaw Lathe Chuck 125mm Self Centering 5" for CNC Drilling Milling Lathe - 1 x 125MM 4 Jaw Lathe Chuck. Model 4 jaw Self Centering Scroll Lathe Chucks.
- 1PC 4Jaw Lathe Chuck 125mm Self Centering 5" for CNC Drilling Milling Lathe NEW - 1 x 125MM 4 Jaw Lathe Chuck. Model 4 jaw Self Centering Scroll Lathe Chucks. However, we will try our best to minimize it.
- ITM Offset Steel Bench Vice Clamp 100mm 125mm 150mm 200mm TM104-125 TM104-200 - The ITM fabricated steel bench vice, (offset jaw) has a precise sliding jaw. With an all-steel construction, these fixed base vices are built to withstand the shocks of hammering, chipping, and other tough applications. Each vice has an integrated anvil for shaping and beating, together with an extra heavy-duty sliding jaw and large-diameter screw. Forged tommy bar along with the steel main screw helps the ineffective transmission of pressure on the workpiece. Carbon steel jaws are hardened 50 ± 5 HRC to withstand tough use and are serrated for a non-slip grip. A safety stopper provided at the end of the slide prevents slides from fall during usage.
- Workshop Vunder Vise Versatile Bench Top Clamping Tool - Aluminum - See pictures.
- Westward 10D707 5" Standard Duty Combination Vise With Swivel Base - This Westward 10D707 5" Standard Duty Combination Vise is a versatile tool that can be used for a variety of tasks. The standard duty vise is made of cast iron, which makes it sturdy and durable. It has a swivel base, making it easy to move around as needed.
- Westward 10D731 4" Drill Press Vise With Stationary Base - The Westward 10D731 4" Drill Press Vise with Stationary Base is a versatile tool. It can be used on drill presses for quick and precise positioning along the X and Y axis. Zoro Select 2Wcl4.0 4" Butt Weld T304 Ss Short Tangent 90 Degree Elbow.
- 1PC ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Spanner New - Made of high quality tool steel material,high hardness, bending ability. Built in self-Release design and tools will never get stuck in holder.
- Vintage Swiveling Bench Vise/Anvil With 3.5” Jaws & 3” Opening - Vintage Swiveling Bench Vise/Anvil With 3.5” Jaws & 3” Opening. Very good lightly used condition with only minor signs of wear.
- Rare Wilton 300 Bullet Vise 3" Jaws Swivel Base - Rare Wilton 300 Bullet Vise 3" Jaws Swivel Base . Was just taken apart and cleaned . Swivels real nice . Very nice vise . Look very closely at all the pictures for a Full Description and True Condition of the item . Use the Zoom - In Image. What you see is what you will receive. Pa June U.S. Shipping Only.. Sorry No Alaska or Hawaii .. Any Questions send message.. Buyer -Agrees to Pay- for item. Payment is due within 3 days at the end of Auction. Item is Sold with NO RETURNS OR REFUNDS.4 business day handling time after payment is received .
- Kaka Industrial HPS-150 6” Cast Iron Heavy Duty Bench Vise - Ductile Iron body.
- KAKA Industrial HIS-150 6" Ductile Iron Heavy Duty Bench Vise - Ductile Iron body. 120°Swivel base.
- Kaka Industrial AVS-100 4" American Type Bench Vise (Swivel With Anvil) - WE ALWAYS FULFILL WHAT WE HAVE PROMISED. Width of jaw: 3.94" / 100mm.
- Vintage Ridgid Bench Pipe Vise model B-Y-2-A 1/8"-2 1/2" Pipe 2A USA - 1/8"-2 1/2" Pipe.
- Vintage COLUMBIAN No 604½ Bench Vise INV16484 - Here we have a very nice Columbian vise made in Cleveland Ohio. The jaws are 4½ ” across.
- Mini Bench Vise, 1.5" Jaw Width Universal Drill Press Table Clamp - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 360-degree swivel base, the bench vise is good for a variety of clamping angles for flexibility.4. Smooth guide rail, easy to adjust the clamping distance.5. Fit for holding small things in jewelry, jewelry carving, watch repair, model making, electronics repair, home and workbench, etc.
- Mini Bench Vise, 2" Jaw Width Universal Drill Press Table Clamp - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 360-degree swivel base, the bench vise is good for a variety of clamping angles for flexibility.4. Smooth guide rail, easy to adjust the clamping distance.5. For woodworking, cutting, drilling, gluing, metalworking, sanding or planing, sawing, etc.
- Drill Press Vise, 4" Bench Clamp for Woodworking, Metalworking, Gluing - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 180-degree rotatable handle, easy to adjust the clamping distance.4. Textured bottom adds friction. Embossed jaw plate for secure grip.5. for most drill press benches. For woodworking, metalworking, sawing, drilling, and gluing assistant installation, etc.
- Drill Press Vise, 5" Bench Clamp for Woodworking, Metalworking, Gluing - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 180-degree rotatable handle, easy to adjust the clamping distance.4. Textured bottom adds friction. Embossed jaw plate for secure grip.5. for most drill press benches. For woodworking, metalworking, sawing, drilling, and gluing assistant installation, etc.
- Mini Bench Vise, 3.15" Jaw Width Universal Drill Press Table Clamp - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 360-degree swivel base, the bench vise is good for a variety of clamping angles for flexibility.4. Smooth guide rail, easy to adjust the clamping distance.5. For woodworking, cutting, drilling, gluing, metalworking, sanding or planing, sawing, etc.
- Drill Press Vise, 5" Bench Clamp for Woodworking, Metalworking, Gluing - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 180-degree rotatable handle, easy to adjust the clamping distance.4. Textured bottom adds friction. Embossed jaw plate for secure grip.5. for most drill press benches. For woodworking, metalworking, sawing, drilling, and gluing assistant installation, etc.
- Mini Bench Vise, 2.5" Jaw Width Universal Drill Press Table Clamp - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 360-degree swivel base, the bench vise is good for a variety of clamping angles for flexibility.4. Smooth guide rail, easy to adjust the clamping distance.5. For woodworking, cutting, drilling, gluing, metalworking, sanding or planing, sawing, etc.
- Mini Bench Vise, 2" Jaw Width Universal Drill Press Table Clamp - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 360-degree swivel base, the bench vise is good for a variety of clamping angles for flexibility.4. Smooth guide rail, easy to adjust the clamping distance.5. For woodworking, cutting, drilling, gluing, metalworking, sanding or planing, sawing, etc.
- Drill Press Vise, 2.5" Bench Clamp for Woodworking, Metalworking, Gluing - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 180-degree rotatable handle, easy to adjust the clamping distance.4. Textured bottom adds friction. Embossed jaw plate for secure grip.5. for most drill press benches. For woodworking, metalworking, sawing, drilling, and gluing assistant installation, etc.
- Mini Bench Vise, 3" Jaw Width Universal Drill Press Table Clamp - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 360-degree swivel base, the bench vise is good for a variety of clamping angles for flexibility.4. Smooth guide rail, easy to adjust the clamping distance.5. For woodworking, cutting, drilling, gluing, metalworking, sanding or planing, sawing, etc.
- Mini Bench Vise, 3.15" Jaw Width Universal Drill Press Table Clamp - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 360-degree swivel base, the bench vise is good for a variety of clamping angles for flexibility.4. Smooth guide rail, easy to adjust the clamping distance.5. For woodworking, cutting, drilling, gluing, metalworking, sanding or planing, sawing, etc.
- Mini Bench Vise, 3" Jaw Width Universal Drill Press Table Clamp - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 360-degree swivel base, the bench vise is good for a variety of clamping angles for flexibility.4. Smooth guide rail, easy to adjust the clamping distance.5. For woodworking, cutting, drilling, gluing, metalworking, sanding or planing, sawing, etc.
- Drill Press Vise, 2.5" Bench Clamp for Woodworking, Metalworking, Gluing - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 180-degree rotatable handle, easy to adjust the clamping distance.4. Textured bottom adds friction. Embossed jaw plate for secure grip.5. for most drill press benches. For woodworking, metalworking, sawing, drilling, and gluing assistant installation, etc.
- Drill Press Vise, 6" Bench Clamp for Woodworking, Metalworking, Gluing - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 180-degree rotatable handle, easy to adjust the clamping distance.4. Textured bottom adds friction. Embossed jaw plate for secure grip.5. for most drill press benches. For woodworking, metalworking, sawing, drilling, and gluing assistant installation, etc.
- Mini Bench Vise, 1.5" Jaw Width Universal Drill Press Table Clamp - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 360-degree swivel base, the bench vise is good for a variety of clamping angles for flexibility.4. Smooth guide rail, easy to adjust the clamping distance.5. Fit for holding small things in jewelry, jewelry carving, watch repair, model making, electronics repair, home and workbench, etc.
- Drill Press Vise, 3" Bench Clamp for Woodworking, Metalworking, Gluing - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 180-degree rotatable handle, easy to adjust the clamping distance.4. Textured bottom adds friction. Embossed jaw plate for secure grip.5. for most drill press benches. For woodworking, metalworking, sawing, drilling, and gluing assistant installation, etc.
- Drill Press Vise, 4" Bench Clamp for Woodworking, Metalworking, Gluing - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 180-degree rotatable handle, easy to adjust the clamping distance.4. Textured bottom adds friction. Embossed jaw plate for secure grip.5. for most drill press benches. For woodworking, metalworking, sawing, drilling, and gluing assistant installation, etc.
- Drill Press Vise, 6" Bench Clamp for Woodworking, Metalworking, Gluing - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 180-degree rotatable handle, easy to adjust the clamping distance.4. Textured bottom adds friction. Embossed jaw plate for secure grip.5. for most drill press benches. For woodworking, metalworking, sawing, drilling, and gluing assistant installation, etc.
- Drill Press Vise, 3" Bench Clamp for Woodworking, Metalworking, Gluing - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 180-degree rotatable handle, easy to adjust the clamping distance.4. Textured bottom adds friction. Embossed jaw plate for secure grip.5. for most drill press benches. For woodworking, metalworking, sawing, drilling, and gluing assistant installation, etc.
- Mini Bench Vise, 2.5" Jaw Width Universal Drill Press Table Clamp - 1. The table vise is a machine tool accessory used to clamp the workpiece when working with the drilling or milling machine, firmly fix the workpiece in place, and accurate drilling.2. Made of high hardness casting iron, clamping stability.3. 360-degree swivel base, the bench vise is good for a variety of clamping angles for flexibility.4. Smooth guide rail, easy to adjust the clamping distance.5. For woodworking, cutting, drilling, gluing, metalworking, sanding or planing, sawing, etc.
- Multifunction X Y Worktable Milling Machine Cross Slide Table Drill Vise Fixture - This milling machine table is made of high-quality aluminum alloy, which is strong and durable. The Table Is Not Only Suitable for Miniature Table Drill and Drill Stand Series, but Also Other Suitable Machine Tools.
- Wilton Model 76653-03 - 4" Bench Vise - Wilton Model 76653-03 - 4" Bench Vise. Like new just been sitting in the shop
- RIDGID BC410 (40195) Top Screw Bench Chain Vise, 1/8" to 4" Capacity - RIDGID BC410 (40195) Top Screw Bench Chain Vise, 1/8 in. Pipe Capacity. Model No: BC410. The RIDGID BC410 (40195) Top Screw Bench Chain Vise has a 1/8 in. pipe capacity. It is equipped with a crank handle that is anchored to the base.
- EXXO 5-Inch Multipurpose Bench and Pipe Vise - 8810 - This vise has a 4 mount hole design so it can be attached to benches for security and stability. ✔️ 360 Swivel Motion - Designed with rotating jaws for multiple work positions. This workbench vise is a great multi purpose tool.
- *PREOWNED* Vintage Ridgid B-Y-2-A Bench Pipe Vise 2-1/2" 🇺🇸 Made + Warranty! - Local pick-up is always an option. ● Handled with care quickly! Trusted and used by other professionals just like you!
- Westward 10D734 8" Drill Press Vise With Stationary Base - The Westward 10D734 8" Drill Press Vise is the perfect addition to your drill press. With a 7 7/8 in. Quantum Storage Systems Qsb202rd Shelf Storage Bin, Red, Polypropylene, 11 5/8. & Recepticles. Electrical Outlets.
- Milling compound Working Table DIY Tool Sliding Cross BENCH DRILL VISE - 1 Worktable. The table is suitable for Mini Drill and drill bracket series. The work table is composed of several adjustable dovetail slot. The working table with three T shaped groove, standard size is.
- FDA Multifunction Worktable Milling Working Table Tool For DIY Lathe Bench Drill - 1 Worktable. The table is suitable for Mini Drill and drill bracket series. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
- Stanley #700 Woodworking 5" Corner Vise Clamp-On Opens to 4" Nice!! USA - Overall, the vise looks and works great. Made in the USA.
- Dayton 31Lz71 3" Machine Vise With Fixed Base - Machine Vise, Spindle Quick Release, Fixed Base, Jaw Width (In.). 3 1/2 in, Jaw Opening (In.). 4 in, Throat Depth (In.). 1 3/4 in, Overall Length (In.). 11-1/2, Overall Height (In.). 3, Clamping Force (Lb.).
- Columbian D44 Swivel-Base Bench Vise - 4 Inch Jaws /Pipe Jaws / 3 x 3" anvil - Columbian D44 Swivel-Base Bench Vise - 4 Inch Jaws /Pipe Jaws / 3 x 3" anvil. Handle slightly bent. Weighs 25lbs.
- Dayton 31Lz70 6" Machine Vise With Fixed Base - Machine Vise, Precision, Fixed Base, Jaw Width (In.). 6 in, Jaw Opening (In.). 6 in, Throat Depth (In.). 2 5/16 in, Overall Length (In.). 13-1/4, Overall Height (In.). 3-1/2, Clamping Force (Lb.). 1100, Jaw Deflection 0.0125 in At 33 lb, Jaw Plate 0.008 in, Bed/Base 0.008 in, High Precision Fully Ground Base.
- 8U-vintage MOHAWK 2 1/2" jaws anvil/vise= bench clamp-on - Up for sale is a MOHAWK 2 1/2" jaws vise.
- 8U-Min 3" Columbian Usa Anvil, Swivel Vise # 43- - Up for sale is an COLUMBIAN # 43 vise.
- 1.75 inch work bench table top screw clamp vise
- 4" Heavy Duty Cross Drill Press Vise 2 Way X-Y Slide Metal Milling Clamp Machine - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Vintage Japan Made Home 203 1/2 in Bench Vise
- 1PC New ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Spanner - Made of high quality tool steel material,high hardness, bending ability. Built in self-Release design and tools will never get stuck in holder.
- 1PC ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Spanner New - (Made of high quality tool steel material,high hardness, bending ability. Built in self-Release design and tools will never get stuck in holder. excluded.).
- 1PC ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Spanner - Made of high quality tool steel material,high hardness, bending ability. Built in self-Release design and tools will never get stuck in holder.
- Machinist Bench Production 6” Vise 6SV - Machinist Bench Production 6” Vise 6SV. See all pictures for the best description. Mounting holes center to center is approximately 7 1/2”. Check out my other listings as well. Thank you for looking
- Antique Reed mfg co Erie Pa stationary Vise 103 1/2 1912 Heavy Duty - The base motion of this stationary vise is fixed, providing a stable platform for precise operations.
- Swivel Vacu-Vise 3" Multi-Angle Table / Bench Hobby Vise Lord & Hodge USA - MADE IN USA
- 0-90 degree tilt guide rod angle flat nose pliers tilt drill press bench vise 4# - 0-90 Degree Tilting Guide Rod Angle Flat Nose Pliers Tilt Guide Angle Pliers Tilt Drill Press Bench Vise Clamp.
- PALMGREN 9629503 5” Multi-Jaw Bench Vise - PALMGREN 9629503 5” Multi-Jaw Bench Vise.
- COLUMBIAN Vise THE COL. HDW. CO. No. 3 Bench Vise 3" Jaws Pre-1920 CLEVELAND USA - Pre-1920 era Columbian Hardware bench vise, model No. 3, predecessor to the No. 143. I'd estimate age to between 1901 and 1917 based on available information. Vise weighs in at 11.4#, 10 3/4" length in closed position and 5" height at jaws.
- Multi-function workbench Mini Bench Drill Fixture Vise XY-axis Slide Worktable - X -axis travel: 200mm. - The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machines. - Mini multifunctional working table, bench work table can realize the multifunction drilling and milling operation.
- Airlox 5” Vise Model J5. Used Surplus - This item has been removed from a working facility. We cannot possibly describe every detail of this item and what is in the pictures is included in the sale. This item is to be used for its intended purpose.
- NOS COLUMBIAN Wilton D-4 HEAVY DUTY 4" JAW VICE OPENING JAW 4.34" ITEM N0 11120 - COLUMBIAN D-4 HEAVY DUTY 4" JAW VICE OPENING JAW 4.34" ITEM N0 11120. Few rust spots from age but you can tell Vise has never been used/mounted Please see Detailed Photos 📸 for Item Condition and Specifics Fast Shipping 🚢
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 5" Universal Bench Vise Anvil Swivel Locking Base Table Top Clamp Heavy Duty - Install the vise on the workbench to complete the work of clamping and fixing. 360 degree Rotatable: With two locking jaws, the base of the bench vise can be rotated up to 360 degree. The direction can be adjusted after installation.
- 10515 Ultimate Grip Forged Steel Bench Vise, 4" - Item model number 10515. Part Number 10515. The guiderails are adjustable to help increase precision and smoothness on the job. This is a great tool to have on your workbench. Included Components Bench Vise.
- QGG 73/3" Machine Vise Manual Vise Bench Vise CNC Vise Grinding Machine Tool - Model: QGG73/3". G.W: 5.3kg size:20.5 7cm. N.W: 5.2kg. pe rpendicularit: 0.005mm.
- Vintage Ridgid B-Y-2-1/2 Bench Pipe Vise 1/8"-2 1/2" Made in USA - Made in USA. Model B-Y-2-1/2.
- Se Aluminium Table Vise 11/2” New - SE ALUMINIUM TABLE VISE 11/2” NEW.
- Worktable Mini Multifunction Milling Machine Double Guide X Y Cross Slide Drill - Application The table is not only suitable for miniature table drill and drill stand series, but also other suitable machine tools. Specification Material: Aluminium Alloy Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell) Package Included 1*Milling Machine Table Details Rocker Design: The handwheel of this table is controlled by a rocker, which makes the clamping process easier and less laborious. Stable Base: The table is designed with a wider base to make it more stable when working to improve efficiency. .
- Westward 10D748 2-1/2" Drill Press Vise With Angle With Stationary Base - The Westward 10D748 2-1/2" Drill Press Vise with Angle with Stationary Base is the machine vise you need for your work. The 2 1/2" jaws are made of high quality ductile iron, which ensures strength and durability.
- Rare Vintage Yost MFG Co 43 1/2 N Vise 3-1/2" Meadville PA USA Made
- Vtg Great Neck 4” Work Shop Bench Vise Mv 712 - VTG GREAT NECK 4” WORK SHOP BENCH VISE MV 712.
- 6 inch Vise with Swiveling Base Bench Clamp Vise for Milling Machine Vice - 1 set of 6" Vise with Swiveling Base Milling Machine Vice (290023). When active mouth of the tongs level migration, above it half sphere can have a vertical downward pressure, therefore the clamp work piece cannot surface the boat.
- Vintage Craftsman 391-5188 4" Jaw Bench Swivel Base Anvil Opens to 5 1/2" 25 lbs - Vintage Craftsman 391-5188 4" Jaw Bench Swivel Base Anvil Opens to 5 1/2" 25 lbs. this is in good condition. There is wear from use but no cracking. Please see all photos for condition. I will look into other shipping options and will refund any excess shipping if I can ship for less.
- 6 Inch Mechanic Bench Vise Table Top Clamp Press Locking Swivel Base Heavy Duty - Feature： Color: Blue Material: Cast Iron Jaw Width: 6" Anvil size:3.23" x 3.35" Jaw Opening Capacity:6.3" Throat depth:2.6" Description： Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Package List: 1 x 6" Mechanic Bench Vise .
- Heavy Duty 3" Cross Drill Press Vise Slide Milling 2 Way X-Y Clamp Sliding Vise - Heavy Duty 3" Cross Sliding Vise. Durable Construction with Fine Grain Cast Iron Castings and Hardened Steel Vise Jaws. Jaw Depth: 3.2cm/ 1.3" Estimate Only . Jaw Width: 7.5cm/ 3" Estimate Only .
- Heavy Duty 5" Cross Drill Press Vise Slide Milling 2 Way X-Y Clamp Sliding Vise - Heavy Duty 5" Cross Sliding Vise. Durable Construction With Fine Grain Cast Iron Castings And Hardened Steel Vise Jaws. Transverse Screw Length: 230mm/9.1" Estimate Only , Stroke: 138mm/5.4" Estimate Only .
- 6" Cast Iron Bench Vise with Anvil 360° Swivel Locking Base Table Top Clamp - Hardened And Polished Replaceable Jaws And Large Anvil. Jaw Width 360 Degree Double Locking Swivel Base. Cast Iron + Steel. Heavy Duty Cast Steel Construction. Unit Weight.
- 6" Heavy Duty Bench Vise Anvil, Rotating Vise Head/Body Rotates 360° - Hardened And Polished Replaceable Jaws And Large Anvil. Jaw Width: approx. 360 Degree Double Locking Swivel Base. Made of Cast Iron + Steel.
- Heavy Duty 6" Bench Vise Anvil Swivel Locking Base Table Top Jaw Clamping Vise - 6" Bench Vise. Hardened And Polished Replaceable Jaws And Large Anvil. Jaw Width: Approx. 360 Degree Double Locking Swivel Base. Heavy Duty Cast Steel Construction. Material: Cast Iron + Steel. Unit Weight: 26 Lbs Estimate Only .
- 4-Inch Bench Vise Ductile Iron with Channel Steel and 360-Degree Swivel Base Hy- - 4-Inch Bench Vise Ductile Iron with Channel Steel and 360-Degree Swivel Base Hy-. Open box see pictures for what's included.
- Bench Vise W/ Anvil Swivel 4in Locking Base Tabletop Clamp Heavy Duty Steel - Product Details: Serrate steel jaws. Oversized striking anvil. Heat treated shaft. 3 Down slots. 360° Double locking swivel base. Product Feature: Precision crafted and designed to provide dependable service and satisfaction. Industrial quality. Heavy duty cast steel construction. Hardened and polished replaceable jaws and large anvil. Swivel base allow you to get the angle on your workpiece. Package including: 4" Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Vice. Note: Color May Vary..
- 5inch Multipurpose Vise Bench Vise 360-Degree Rotation Clamp on Vise Heavy Duty - Description Swivel Multipurpose Bench Vise A 5-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features Durable Material Built by ductile cast iron, the vise is more durable and hard when in use. Designed for long service time. Powerful Clamping Jaws.
- Hot MiniTable Vise Aluminum Alloy Vice Swivel Lock Clamp Craft Hobby Cast - 1 x Table Vise. This is a cast aluminum vice that has a swivel lock action that holds the vice firmly to the table. Jaw opening: 30 mm Max. Jaw width: 40 mm. Fixed clamp: 35mm Max. Material: Aluminum alloy.
- 1/8 In. To 8 In. Pipe Capacity, Top-Screw Bench Chain Vise Model BC810A Durable - Pipe Capacity, Top-Screw Bench Chain Vise Model BC810A (Includes Pipe Rest And Bender). Hold pipe and tubing in place with the RIDGID BC810A Top Screw Bench Chain Vise. It has a built-in crank handle conveniently anchored to the base for tightening the chain.
- Vice SYSTEM, 57.1MM JAW, WORK HOLDING, Vice Bench 301 - VICE SYSTEM, 57.1MM JAW, WORK HOLDING Jaw Width: 63.5mm Jaw Opening Max: 57.1mm Product Range: Panavise Vice Systems Vice Jaw Opening Max: 57.1mm Vice Type: Bench.
- Vintage Ridgid B-Y-2-A Bench Pipe Vise 1/8"-2 1/2" Pipe USA - 1 Year Warranty. We Have Multiple Units Of This Available. Just Ask If You Need Any More!
- 4inch Heavy-duty Tilting Precision Angle Flat-nose Pliers Milling Machine Tool
- Heavy Duty 5" Bench Vise Anvil Swivel Locking Base Table Top Jaw Clamping Vise - 5" Bench Vise. Hardened And Polished Replaceable Jaws And Large Anvil. Jaw Width: Approx. 5" (125mm). 360 Degree Double Locking Swivel Base. Heavy Duty Cast Steel Construction. Material: Cast Iron + Steel.
- 5" (125mm) Heavy Duty Bench Vise Anvil, Rotating Vise Head/Body Rotates 360° - Jaw Width: approx. Hardened And Polished Replaceable Jaws And Large Anvil. 360 Degree Double Locking Swivel Base. Made of Cast Iron + Steel.
- Precise tilting table, Inv 45635 and 45636 - Inv 45635 & 45636. Precise tilting table. table size 10"x15". Not What You Were Looking For?.
- Apex 6" tilting vise with swivel base heavy duty, Inv 45631 - Apex tilting vise. Not What You Were Looking For?.
- Vintage WILTON Bench Anvil Vise - 4 inch - Vise is used (see photos). The vise in the photo is the one you will recieve.
- Yuasa No. 125 Solid Steel Workshop Vise. 6" Jaw Range 9" Base Swivel - 6" JAW RANGE. 5" JAW RANGE WIDTH. 9" ROTATING SWIVEL BASE MOUNT. NO. 125 SOLID STEEL. 3-1/2" DEPTH. W/SWIVEL BASE. 5/8" MOUNT HOLES.
- Lake Side 3" Vise Bench Table Mount Swivel Base
- 3.3 INCH Universal Rotate 360° Work Bench Vise Black with Quick Adjustment - Description:.
- 3 INCH Home Bench Vise with Clamp Post Universal Bench Clamps 360° Swivel Base - Description:.
- 1PC ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Spanner New - Made of high quality tool steel material,high hardness, bending ability. Built in self-Release design and tools will never get stuck in holder.
- Vintage Craftsman Swivel Vise 3-1/2" Jaw # 506-51801 Pipe Jaws Red Made in U ! D - Make Supersized seem small. Get images that.
- WORKPRO Bench Vise 4-1/2" Vice for Workbench, Swivel Base Bench for Woodworking - Very Stable Bench Vise - It is so easy to install on your bench, so simple in fact that any idiot could do it. It is perfect for small projects and is highly adept at securing tools for sharpening and such.
- 2 Axis X-y Bench Drill Vise Milling Machine Compound Work Table Cross Sliding - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Table Drill Vise Bench Fixture Worktable X Y Cross Slide Mini Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Milling Working Table Milling Machine Compound Kit Mini Multifunction Worktable - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Precision Vise Fixture Milling Machine Multifunction Machine Vise Worktable - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Drill Worktable 2 Axis Vise Mini Multifunction Milling Machine Aluminium Alloy - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- 2 Axis Table Drill Vise Fixture Mini Working Sliding Table Drill Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Multifunction Worktable Mini Milling Machine Drill Vise Fixture For Bench Drill - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Mini Aluminium Alloy Drill Machine Vise Milling Working Table Fixture New - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Work Table Press Vise X-Y 2 Axis Milling Machine Cross Slide Bench Drill Fixture - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Cross Slide Bench Drill Vise Fixture Compound Milling Machine Work Table 2 Axis - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Drill Vise Fixture Cross Slide Compound Bench Work Table Mini Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Work Table 2 Axis Cross Slide Bench Drill Vise Fixture Compound Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Compound Worktable Milling 2 Axis Multifunction For Bench Drill Fixture Vice NEW - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- MINT Vintage WhiteGate VISES for a WhiteGate Woodworking Bench - Vintage WhiteGate VISES for a WhiteGate Woodworking Bench. NOTE: this item is JUST the VISES for a WhiteGate table. Made in the US, and in near MINT CONDITION.
- Panavise 301 2-1/2" Light Duty Multi-Angle Vise With Stationary Base - Multi-Angle Vise. Ridgid 33110 Cutter Wheel,For 4A506/4Cw52. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
- 0-90 Degree Tilting Guide Rod Angle Tilt Guide Angle Pliers Bench Vise Clamp
- Bench Vise with Anvil Swivel 5" Locking Base Table Top Clamp Heavy Duty Vice New - Feature： Precision crafted and designed to provide dependable service and satisfaction. Industrial quality. Heavy duty cast steel construction. Hardened and polished replaceable jaws and large anvil. Swivel base allow you to get the angle on your workpiece. color may vary. Heavy duty cast steel construction. Hardened and polished replaceable jaws and large anvil. Swivel base allow you to get the angle on your workpiece. Heavy Duty 5" Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Steel. Specification： Serrate steel jaws Oversized striking anvil Heat treated shaft 3 Down slots 360° Double locking swivel base .
- 0-90 Degree Tilt Guide Rod Angle Flat Nose Pliers Tilt Guide Angle Pliers vise
- VINTAGE WILTON 5” BENCH VISE MODEL 111103 TOOL USA nice condition - VINTAGE WILTON 5” BENCH VISE MODEL 111103 TOOL USA nice condition.
- Wilton General Purpose Bench Vise, 4" Jaw Width, 3" Max Opening (11104) - Item model number 11104. Part Number 11104. Included Components Bench Vise. SECURE GRIP: Hardened steel replaceable jaw inserts are machine serrated for a safe and secure grip under maximum torque. Jaw Width (in.).
- 6 Inch Heavy Duty Multi-purpose Rotating Bench Vise Swival 360 Degree - Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" UPC Does not apply Brand autoooparts Base Motion Type Swivel Jaw Width 6 in Jaw Opening Capacity 5-1/4 in Material Cast Iron MPN APO120584.
- Machine Vise Clamps Precision 5" Jaw Width 360 Swivel Base CNC Vise Work Bench - 5" Precision Mill Vise 360 Swivel Base Milling Vise Fit for Milling Shaping Machines. Precision milling drilling vise, suitable for milling, drilling machine, and precision parts finishing. Jaw Width: 5".
- 5" Accu Lock Precision Swivel Base Vise Milling Drilling Machine Bench Clamp - 5" Accu Lock Precision Swivel Base Vise. Jaw Width: 5". Jaw Opening: 5". Jaw Height: 1-3/4" Estimate Only . Base Swivel: 360 Degree. Unit Weight: 60 Lbs Estimate Only .
- NOS Metl-Former Swayne Robinson Vise Craftsman Dunlap 5230 - This appears to be an unused Swayne-Robinson Metl-Former vise with all of the original attachments and the original box. The vise opens and closes completely. I do not see an cracks in the vise. There is some surface rust from sitting in the original box. Please look at the pictures carefully to judge actual condition. Please ask any a questions you may have prior to purchasing. Please look at my other auctions, I have multiple machinist items and vises available.Shipping to continental US only (lower 48). Item will be shipped within 3 days of payment. No returns.
- Rapid 150 6" Vise Swivel Base with Lock Bolts Made In Poland - Good used part with rust etc.
- 6 Inch Multi-purpose Rotating Bench Vise Swival Heavy Duty 360 Degree - Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" Note:.
- Ridge Tool Company Top Screw Bench Chain Vise, BC410A, 1/8 in - 4 in Pipe Cap - - Top Screw Bench Chain Vise, BC410A, 1/8 in - 4 in Pipe Cap Ridgid Top Screw Bench Chain Vises. Jaw Material: Steel. Material: Cast Iron.
- Cross Drill Press Vise Slide Milling Machine 6" 2 Way Movement Clamp Heavy Duty - Application It is suitable for most milling and drilling machines and can easily machine wood and metal parts with high precision and quality. It is widely used in home emergency repair, electrician repair, plumbing repair, automobile repair, non-motorized vehicle repair, machinery repair, etc. Specification Color: Black Material: Cast Iron, Steel Surface Treatment: Plastic Spraying Function: Wire Stripping, Wire Breaking, Wire Rolling Shape: Flat Mouth Applicable Objects: Water Pump, Pipe, Steel Wire, Clamp Table Product Height: 15.5cm/ 6.1in Jaw Depth: 4cm/ 2in Jaw Width: 15.3cm/ 6in Maximum Clamping: 15.7cm/ 6.2in Package Size: 36*36*20cm/ 14.17*14.17*7.87in Net Weight: 14.5kg/ 31.97lbs Gross Weight: 15kg/ 33.07lbs Package Included 1* Vise Clamp Machine 2* Rocker.
- GIBRALTAR Bench & Pipe Combination Vise: 4″ Jaw Width CBV039 - Bench & Pipe Combination Vise: 4″ Jaw Width CBV039. Jaw Width 4.0000. Jaw Opening Capacity 4-3/8 in. High Visibility No. Material Ductile Iron.
- Vintage Columbian swivel 4" bench vise with pipejaws. excellent. USA - Up for bid is this used in nice working order Columbian No. 04 swivel bench vise. This has a set of small pipe jaws and 1 1/4x1 3/4 anvil on the back. This will fasten to a workbench by 3- 1/2 ' bolts. This can be yours for a low bid
- 4" Multi-purpose Rotating Bench Vise Swival 360 Degree Cast Iron - Feature： Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Description： Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face. Package List: 4" Multi-purpose Rotating Bench Vise New Multi Purpose Vise .
- Milwaukee Tool Co. Swivel Base Bench Vise (3-1/2" Jaw Width) Anvil & Pipe Jaws - Milwaukee Tool Co. 3-1/2" Jaw Width.
- ER25UM Type Clamping Nut And Wrench CNC Milling Lathe Precision Spanner - (Excluded.).
- ER25UM Type Clamping Nut And Wrench CNC Milling Lathe Spanner Precision - Size:As Picture.
- 4" Cross Slide Drill Press 2Way X-Y Compound Vise Bench Metal Milling Heavy Duty - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4"Cross Slide Drill Press X-Y Compound Vise Bench Metal Milling Heavy Duty Black - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 0-90 degree tilt guide rod angle flat nose pliers tilt drill press bench vise 4# - 0-90 Degree Tilting Guide Rod Angle Flat Nose Pliers Tilt Guide Angle Pliers Tilt Drill Press Bench Vise Clamp.
- 1705A 6-Inch Hitch Vise Truck Bench Vise Mount Trailer Fits 2" Hitch Receiver - Mounted on the workbench or truck tailor for general applications. The hitch pin and clip are for truck receiver mounting. Mounted on the workbench or truck tailor for general industrail application.
- Wilton Drill Press Vise Model 25, 2-1/2” Jaws, Works Good (3.3) made in Japan - For sale is this used Wilton Drill Press Vise Model 25, 2-1/2” Jaws, Works Good (3.3) looks in nice shape made in Japan. zoom my pictures so you can see them better. you will receive it just like is on my pictures.
- ER25UM Type Clamping Nut And Wrench CNC Milling Lathe Precision Spanner - (Excluded.).
- Clamping Nut And Wrench CNC Milling Lathe Spanner Precision ER25UM Type - (Excluded.).
- Clamping Nut And Wrench CNC Milling Lathe Spanner Precision ER25UM Type
- ER25UM Type Clamping Nut And Wrench CNC Milling Lathe Precision Spanner - (Excluded.).
- Clamping Nut And Wrench Milling CNC Lathe Spanner Precision ER25UM Type - (Excluded.).
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Vintage Craftsman USA Swivel Bench Vise #51871- 5 1/2 Jaws, Machinist Mechanic - Vintage Craftsman USA Swivel Bench Vise #51871- 5 1/2 Jaws, Machinist Mechanic. Works great! Missing one pad please check photos thanks!
- Brand NEW Dayton 6Z845C 6" Machine Vise - See pictures.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- ONE NEW 250mm 3Jaw Lathe Chuck 10In Self-Centering for Drilling Milling Lathe - 1 x 3 Jaw Lathe Chuck. 3 jaw Self Centering Scroll Lathe Chucks. Extend Automation.
- 1PC 250mm 3Jaw Chuck 10In Self-Centering for CNC Drilling Milling Lathe NEW - 1 x 3 Jaw Lathe Chuck. 3 jaw Self Centering Scroll Lathe Chucks. we very glad to solve all problem with you. However, we will try our best to minimize it. Products Standard. TOP QUALITY Hardened Steel.
- 1PCS NEW 250mm 3Jaw Chuck 10In Self-Centering for Drilling Milling Lathe - 250mm 3Jaw Lathe Chuck 10In Self-Centering for CNC Drilling Milling Lathe. 1 x 3 Jaw Lathe Chuck. 3 jaw Self Centering Scroll Lathe Chucks. However, we will try our best to minimize it. TOP QUALITY Hardened Steel.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way X-Y Heavy Duty Clamping Vise - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 6.5" Ductile Iron Work Bench Vise Swivel Base w/ Pipe Jaw & Anvil for Metal Work - Multifunctional: Mounting vise on the workbench, then you could do the work of grinding, cutting, etc. Tapping work can also be done on the anvil of the bench vise. Pipe jaw can clamp a round workpiece.
- 5" Bench Vise Swivel Head Rotating Base w Pipe Jaws for Plumbing Knife Making - Multifunctional: Mounting vise on the workbench, then you could do the work of grinding, cutting, and etc. Tapping work can also be done on the anvil of bench vise. Forward bench vise features three sets of jaws for gripping parts: Machinist Jaws, built in Pipe Jaws and V-Jaws.
- Wilton 5" Standard Duty Combination Vise With Swivel Base - This Wilton 1550 5" Standard Duty Combination Vise is the perfect tool for holding your workpiece in place. It has a swivel base, so you can easily move it around. The ductile iron body is sturdy and long lasting.
- 6" Mechanic Bench Vise Table Top Clamp Press Locking Swivel Base Heavy Duty - Feature： Color: Blue Material: Cast Iron Jaw Width: 6" Anvil size:3.23" x 3.35" Jaw Opening Capacity:6.3" Throat depth:2.6" Description： Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Package List: 1 x 6" Mechanic Bench Vise .
- Stanley Vise No 746 SW Sweet Heart Antique Pat. 1908 - This Item is used and shows signs of age use and wear.
- Yuasa 6" Jaw Swivel Base Vise 590-316 Heavy Duty Milling Machine
- 8'' Bench Vice heavy duty 200MM Cast Iron Body with Steel Casting nut - Made by cast iron Body with steel casting Nut. Rotating Angle: Left/Right.
- 4'' Bench Vice 100MM Cast Iron Body with Steel Casting nut - Made by cast iron Body with steel casting Nut. Rotating Angle: Left/Right.
- SWIVEL Vice, ESD, SPANNFIX, 70MM, Vice Bench 9-205 ESD - SWIVEL VICE, ESD, SPANNFIX, 70MM Jaw Width: 50mm Jaw Opening Max: 70mm SVHC: No SVHC (15-Jan-2019) Clamp Opening: 50mm External Depth: 38mm Length: 70mm Vice Type: Bench Weight: 1.45kg.
- KINATECHNICS Ball Swivel Bench Vise, Clamp, joint rotating circuit board hobby - Ball Swivel Bench Vise. We will work with you to resolve any problem you may have.
- Vice, MULTIPURPOSE WORK CENTRE, 350, Vice Bench 350 - VICE, MULTIPURPOSE WORK CENTRE, 350 Jaw Width: 38.1mm Jaw Opening Max: 228.6mm Product Range: Panavise Vice Systems.
- Antique Prentiss Bulldog #522 Machinist Vise 3" Jaws Swivel Base Opens 5"+ USA - An antique Prentiss Bulldog #522 machinist vise with 3" jaws, a swivel base, opens to 5+" and weighs 26+ lbs. Other than nicks and scratches the vise looks pretty nice. Made in the USA.
- Vintage Larin 4 Inch Bench Vise With Black Finish - Vintage Larin 4 Inch Bench Vise With Black Finish. In great working condition, has some surface rust where paint has come off. *****Free shipping only to the continental US or for global shipping to international hub.
- Hougen 12434 34MM X 50MM "12,000-Series" Annular Cutter - Use Hougen "12,000-Series" Cutters with stationary tools, drill presses and magnetic drills. 1" (25mm) depth of cut. Cuts holes faster, more accurate and cleaner than competitive tools. Unique Hougen features provide the best performance in the widest range of materials.
- 5" Steel Swivel Bench Vise with Anvil Table Top Clamp Locking Base S3795
- Vintage Reed no. 4C Bench Vise Swivel Base Bolt. - Bolt is in great shape. The donor vise was damaged beyond repair, but I was able to salvage some parts.
- Bessey Bench Vise 8″ Jaw W 10″ Jaw Opening BV-DF8SB INCOMPLETE - Vise is missing it's handle as shown, as well as one end to one swivel nut handle. Bench Vise. Features Unbreakable; Perfect Parallel Jaw Design; Stationary Jaw & Base; Drop Forged Moveable Jaw. Jaw Opening Capacity 10.0000 in.
- 5" Bench Vise with Anvil Swivel Locking Base Table Top Clamp Heavy Duty Vice - Feature： Precision crafted and designed to provide dependable service and satisfaction. Industrial quality. Heavy duty cast steel construction. Hardened and polished replaceable jaws and large anvil. Swivel base allow you to get the angle on your workpiece. color may vary. Heavy duty cast steel construction. Hardened and polished replaceable jaws and large anvil. Swivel base allow you to get the angle on your workpiece. Heavy Duty 5" Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Steel. Specification： Serrate steel jaws Oversized striking anvil Heat treated shaft 3 Down slots 360° Double locking swivel base .
- Wilton Pipe and Bench Combo Vise 8″ Jaw W x 8″ Jaw Opening 63304 - Bench & Pipe Combination Vise. Jaw Opening Capacity 8 in. Jaw Width 8.0000. Pipe Jaw Included Yes. Throat Depth 4. Jaw Face Serrated. Swivel Angle 360. Material Cast Iron.
- Wilton Cbv-100 4" Light Duty Portable Vise With Clamp-On, Swivel Base - Portable Vise. Storm Interface 720 Gfxi 12 Key Illuminated Keypad,12 Key,Ip65. Light Industrial. & Recepticles. Electrical Outlets. and Enclosures. Electrical Boxes. General Purpose.
- Vintage Technical Devices Co. Printed Circuit Board Vise for Parts H - Vintage Technical Devices Co. Printed Circuit Board Vise for Parts. What I have is in good working condition. The base, base rod and clamps are missing. Please view pictures for additional information and actual condition. If you have any questions, please ask. Thanks for looking. I will ship within 1 business day following cleared payment. I try to provide enough pictures so that you can judge the item's condition, grade, or worth.
- PanaVise Multi-Angle Vise - Screw Mount Table Bench Vise - 3" Wide Jaw Opening - Used in Excellent Condition - PanaVise Multi-Angle Vise - Screw Down to Mount to Table Bench -Vise Has a 3" Wide Jaw Opening. Check Pictures.
- Swivel Vacu-Vise 3" Multi-Angle Table / Bench Hobby Vise Lord & Hodge - Swivel Vacu-Vise 3" Multi-Angle Table. / Bench Hobby Vise. These are good little vises that mount tightly to any table top or smooth bench. It's in good working condition. Please see the photos and thanks for looking.
- Wilton Bench and Pipe Combo Vise 8″ Jaw W x 8″ Jaw Opening 63304 DAMAGE - Bench & Pipe Combination Vise. Jaw Opening Capacity 8 in. Jaw Width 8.0000. Pipe Jaw Included Yes. Throat Depth 4. Jaw Face Serrated. Swivel Angle 360. Material Cast Iron.
- Vintage Prentiss PV Co. NY 152 SMALL Bench VISE 1.5" Made in USA Used - Vintage Prentiss PV Co. NY 152 SMALL Bench VISE 1.5" Made in USA Used. Nice condition for age. See pics. Clamping bolt may not be original but does work perfectly.
- Compound Mini Working Table 2 Axis Cross Bench Drill Vise DIY Sliding Milling US - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Drill Vise Worktable Cross Slide Multifunction Worktable Mini Milling Machine US - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- MACHINE VISE SWIVEL BASE *NEW* Cast Iron w/ Mount. Hardware FOR 6'' Milling CNC - NEW Swivel Base with Mounting Hardware for 6" Milling Machine Vise CNC. (2961)You are purchasing what is shown in photos only. All photos are of the actual product(s) you will receive and are intended to help describe the quality and condition of the piece(s).
- Bench Vice 100 mm Machining Clamp with mount slots - 100mm Bench Machining Vice Secure bolt mounted jaws with 45 degree slots Cast iron construction with high tensile bolts used in assembly 100 mm Jaw range Includes six mounting slots to securely fasten the vise to base Package includes handle strength rod as pictured Specifications : Total footprint size end to end 290 x 160 x 60 mm Clamping range: 100mm Jaw width: 105mm Jaw height: 20 mm Handle diameter: 23 mm Material: Cast Iron Weight 3.250 kg Type:Machining Vice Quantity: 1 .
- Vintage Dunlap Swivel Bench Vise 05236 3-1/2" USA Made - Vintage Dunlap Swivel Bench Vise 05236 3-1/2" USA Made. Older vise works as it should, sears roebuck used to sell these it weighs 18.5 pounds see the pictures
- WILTON 7" Rapid Acting Woodworking Vise, 10" Opening In Original Box - See photos & description.
- Wilton 1550 5" Standard Duty Combination Vise With Swivel Base - This Wilton 1550 5" Standard Duty Combination Vise is the perfect tool for holding your workpiece in place. It has a swivel base, so you can easily move it around. The ductile iron body is sturdy and long lasting.
- Cross Slide Work Table Compound Vise Drill Press Bench Axis Mill Machine Vice - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Nice Vtg Antique NYE No. 72 Pipe Vise 1/2"-3 1/2" Capacity Excellent Condition - This Vise looks great no repairs no casting cracks, jaws look good and the heavy duty handle is straight.
- KINATECHNICS Ball Swivel Bench Vise Clamp Joint Rotating Circuit Board Hobby
- K Tool 64106 Bench Vise- Steel - 6 inch Jaws - Rugged, all steel vise is stronger than its cast iron counterpart. Ten-year warranty. K Tool 70034 "U" Blade Mini Trim Panel Tool with Stainless Steel Blade. K Tool KTI-70004 4-PIECE SCRAPER/PUTTY KNIFE SET.
- PONY 5-inch Bench Vise Utility Combination Pipe Vise Heavy-Duty 6614 lbs Load - Reach up to 6614 lbs. of clamping force. Stable Bench Vise: It is easy to install on your bench, simple and features with 3 fixed mounting tabs to help secure the bench vise on the table. Strong Iron Construction: The 5" bench vise features with a solid gray iron construction, more durable and harder than others bench vise that made of ordinary materials.
- Craftsman Swivel Vise Model 506-51801 W/Carriage Bolts - Craftsman Swivel Vise Model #506-51801 w/all 3 carriage mounting bolts. I MAY NOT HAVE KNOWN THAT IT SHOULD HAVE HAD ONE IN THE FIRST PLACE.
- PONY 5inch Bench Vise Heavy-Duty Utility Combination Pipe Vise 360 Degree Swivel - Stable Bench Vise: It is easy to install on your bench, simple and features with 4 fixed mounting tabs to help secure the bench vise on the table. Strong Iron Construction: The 5" bench vise features with a solid gray iron construction, more durable and harder than others bench vise that made of ordinary materials.
- Panavise 201 1" Light Duty Multi-Angle Vise With Stationary Base - Kuriyama Fire Products Ghi1armtr50n Fire Hose,50 Ft. L,Red,1" Dia,Rocker Lug. Light Industrial. Electrical Outlets. and Enclosures. Electrical Boxes. General Purpose. & Industrial. Zoro Select 4Hur8 Picnic Table,96" W X62" D,Green.
- Vintage Rock Island 4-1/2" Wide Jaw Machinist Bench Vise, Missing Base, Usa - ROCK ISLAND. MISSING BASE . MADE IN USA. THIS IS A PREVIOUSLY USED ITEM.
- WILTON 121070 4" Vise Bench Table Mount Swivel Base - FREE SHIPPING - WILTON 121070 4" Vise Bench Table Mount Swivel Base.
- Precision Milling Machine Vise Tilting Guide Rod Angle Flat-nose Pliers Clamp - 3"/4" Precision Milling Machine Vise Tilting Guide Rod Angl e Flat-nose Pliers Tilting Pliers Drilling Machine Bench Vise Clamp.
- Strong Hand 3axis Fixture Vise With Quick Acting Screw Two Standoffs Swing Away - Features: 3-Axis fixture, Quick acting screw, two stand-offs "swing away" Arm. “Swing Away” The 3rd Axis Arm For Quick And Easy Part Removal + Two Quick Acting Screws. Hold Parts In Position During Cool Down To Minimize Distortion Due To Contraction.
- Vintage Wilton Vise 5" Jaw Rotating Head Pipe Mechanic Bench - Used, one jaw has been welded in.Shipping to lower 48 States Only.
- Milling Machine Bench Drill Press Vise Fixture Cross Slide X Y Axis Work Table - This milling machine table is made of high-quality aluminum alloy, which is strong and durable. Such a strong, durable, and easy-to-use milling machine table is a wise choice for you. High-quality M aterial : This milling machine table is made of high-quality aluminum alloy.
- Compound Milling Machine Work Table Cross Slide 2 Axis Bench Drill Vise Fixture - This milling machine table is made of high-quality aluminum alloy, which is strong and durable. Such a strong, durable, and easy-to-use milling machine table is a wise choice for you. High-quality M aterial : This milling machine table is made of high-quality aluminum alloy.
- ONE NEW ER32 16 mm precision collet forlathe tool and spindle motor - Model: ER32 - 16 mm. ( 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11 mm, 12mm, 1 3mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 3.175mm ). We also have other size as follow red words. we very glad to solve all problem with you.
- ONE NEW MT2 Shank to B16 Adapter Taper Arbor Drill Sleeve - The Morse Taper Sleeve is mainly used in drilling machine and lathe machine. Content : 1 x Reducing Drill Sleeve.
- ONE NEW MT2 Shank to B16 Adapter Taper Arbor Drill Sleeve - The Morse Taper Sleeve is mainly used in drilling machine and lathe machine. Content : 1 x Reducing Drill Sleeve. we very glad to solve all problem with you. However, we will try our best to minimize it.
- Columbian Clamp On 3" Bench Vise 33150 - Columbian Clamp On 3" Bench Vise 33150. NEW Unopened Box Stored in a smoke-free and climate controlled environment.
- 1PC NEW ER32 16 mm precision collet forlathe tool and spindle motor - Model: ER32 - 16 mm. ( 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11 mm, 12mm, 1 3mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 3.175mm ). We also have other size as follow red words.
- 1PCS NEW ER32 16 mm precision collet forlathe tool and spindle motor - Model: ER32 - 16 mm. ( 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11 mm, 12mm, 1 3mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 3.175mm ). We also have other size as follow red words.
- 1PC NEW MT2 Shank to B16 Adapter Taper Arbor Drill Sleeve - The Morse Taper Sleeve is mainly used in drilling machine and lathe machine. Content : 1 x Reducing Drill Sleeve.
- 1PCS NEW MT2 Shank to B16 Adapter Taper Arbor Drill Sleeve - The Morse Taper Sleeve is mainly used in drilling machine and lathe machine. Content : 1 x Reducing Drill Sleeve.
- Wilton Bench and Pipe Combo Vise 8″ Jaw W x 8″ Jaw Opening 63304 PARTS/REPAIR - Bench & Pipe Combination Vise. Jaw Opening Capacity 8 in. Jaw Width 8.0000. Pipe Jaw Included Yes. Throat Depth 4. Jaw Face Serrated. Material Cast Iron. Swivel Angle 360.
- ONE MT2 Shank to B16 Adapter Taper Arbor Drill Sleeve w Tang Tailstock CP for - The Morse Taper Sleeve is mainly used in drilling machine and lathe machine. Content : 1 x Reducing Drill Sleeve.
- 1PCS Brand NEW MT2 Shank to B16 Adapter Taper Arbor Drill Sleeve - The Morse Taper Sleeve is mainly used in drilling machine and lathe machine. Content : 1 x Reducing Drill Sleeve.
- 1PC NEW MT2 Shank to B16 Adapter Taper Arbor Drill Sleeve - The Morse Taper Sleeve is mainly used in drilling machine and lathe machine. Content : 1 x Reducing Drill Sleeve.
- 1PCS NEW MT2 Shank to B16 Adapter Taper Arbor Drill Sleeve - The Morse Taper Sleeve is mainly used in drilling machine and lathe machine. Content : 1 x Reducing Drill Sleeve. Extend Automation.
- 1PCS Brand NEW MT2 Shank to B16 Adapter Taper Arbor Drill Sleeve - The Morse Taper Sleeve is mainly used in drilling machine and lathe machine. Content : 1 x Reducing Drill Sleeve. Develop Industrial. we very glad to solve all problem with you. Color : Silver Tone.
- ONE MT2 Shank to B16 Adapter Taper Arbor Drill Sleeve w Tang Tailstock CP for - The Morse Taper Sleeve is mainly used in drilling machine and lathe machine. Content : 1 x Reducing Drill Sleeve.
- 1PCS MT2 Shank to B16 Adapter Taper Arbor Drill Sleeve NEW - The Morse Taper Sleeve is mainly used in drilling machine and lathe machine. Content : 1 x Reducing Drill Sleeve. 100% Money Back. However, we will try our best to minimize it. Color : Silver Tone.
- 1PCS NEW MT2 Shank to B16 Adapter Taper Arbor Drill Sleeve - The Morse Taper Sleeve is mainly used in drilling machine and lathe machine. Content : 1 x Reducing Drill Sleeve.
- 1PCS ER32 16 mm precision collet forlathe tool and spindle motor NEW - (Model: ER32 - 16 mm. ( 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11 mm, 12mm, 1 3mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 3.175mm ). We also have other size as follow red words. 100% Money Back. excluded.).
- ONE ER32 16 mm precision collet forlathe tool and spindle motor - Model: ER32 - 16 mm. ( 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11 mm, 12mm, 1 3mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 3.175mm ). We also have other size as follow red words.
- 1PCS Brand NEW ER32 16 mm precision collet forlathe tool and spindle motor - Model: ER32 - 16 mm. ( 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11 mm, 12mm, 1 3mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 3.175mm ). We also have other size as follow red words.
- 1PCS NEW ER32 16 mm precision collet forlathe tool and spindle motor - Model: ER32 - 16 mm. Extend Automation. ( 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11 mm, 12mm, 1 3mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 3.175mm ). We also have other size as follow red words.
- ONE ER32 16 mm precision collet forlathe tool and spindle motor - Model: ER32 - 16 mm. ( 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11 mm, 12mm, 1 3mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 3.175mm ). We also have other size as follow red words.
- 1PCS Brand NEW ER32 16 mm precision collet forlathe tool and spindle motor - Model: ER32 - 16 mm. ( 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11 mm, 12mm, 1 3mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 3.175mm ). We also have other size as follow red words. we very glad to solve all problem with you.
- 1PCS ER32 16 mm precision collet forlathe tool and spindle motor NEW - Model: ER32 - 16 mm. ( 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11 mm, 12mm, 1 3mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 3.175mm ). We also have other size as follow red words. 100% Money Back. Ashley Automation.
- 1PCS NEW ER32 16 mm precision collet forlathe tool and spindle motor - Model: ER32 - 16 mm. ( 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11 mm, 12mm, 1 3mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 3.175mm ). We also have other size as follow red words.
- Vintage PRENTISS 161-1/2 Bench Vise 3" Jaws - 3" Jaws in good condition. Made in USA. Good working condition.
- Wilton 744 4” Jaws Swivel Bench Vise USA Made - This is a Wilton 744 vise. Wilton Vise. This is a very heavy high quality bench vise. One of the pipe jaws is cracked and needs welded or replaced. The jaws dont quite close all the way. swivel base.
- Forward DT08125A 5-Inch Heavy Duty Bench Vise 360-Degree Swivel Base and Head... - Multifunctional: Mounting vise on the workbench, then you could do the work of grinding, cutting, and etc. Tapping work can also be done on the anvil of bench vise. The front jaw can be rotated by 360 degree, more convenient for clamping works.
- 2.5" 63mm 3 Jaw K01-63 Mini Lathe Chuck Self Centering M14 Reversible Jaws - (K01-63 2.5" 63mm Chuck 1pcs. excluded.).
- Paramo Swivel No 3 4” Jaw Bench Vise Made In England Hi-duty Vice 45 Pounds - Paramo No 3 4” Jaw Bench Vise Made In England Hi-duty Vice 45 Pounds. Good used condition showing some wear with a nice aged patina. Weighs 45 pounds
- Bench Multifunction Drill Vise Worktable Fixture Milling Machine Aluminium Alloy - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Compound Worktable Multifunction Milling 2 Axise Working Table Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Rock Island 124a Bench Vise. 4-1/2” Jaws. Swivel Base. 58lbs - Rock Island 124a Bench Vise. 4-1/2” JawsSwivel Base58lbs. Local Pickup in Connecticut https://youtube.com/shorts/3rN6vhq8EWQ?feature=shareFollow me on instagram at pd_veepsAnd veepsgarage on youtube
- Dayton 6Z846 4" Machine Vise With Fixed Base - Machine Vise, Standard, Fixed Base, Jaw Width (In.). 4 in, Jaw Opening (In.). 4 in, Throat Depth (In.). 1 1/2 in, Overall Length (In.). 9, Overall Height (In.). 2-7/8, Jaw Deflection 0.002 in @ 2000 lbs, Jaw Plate Square to 0.002 in, Bed/Base Parallel to 0.001 in, 1/2 in Wide Slotted Shoulder and Precision Ground Bars.
- Milling Machine Work Table Compound Cross Slide Bench Drill Press Vise Fixture - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Westward 22Xp97 Bench Yoke Vise,1/8 To 4 In - Ductile Iron Yoke and Base, Hardened Steel Jaws. Msa Safety 10239985 Full Body Harness, Vest Style, Xl, Nylon, Black. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes.
- 6" Heavy Duty Multi-purpose Rotating Bench Vise Swival 360 Degree - Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" UPC Does not apply Brand marddpair Base Motion Type Swivel Jaw Width 6 in Jaw Opening Capacity 5-1/4 in Material Cast Iron MPN AMZ648139.
- Bench Vise Columbian D63-1/2 - COLUMBIAN D63-1/2. I KEPT THIS ONE FOR 9 MONTHS CAUSE I LOVE IT AND IT MUST GO, ANYONE WHO SEES IT FALLS IN LOVE WITH IT. AND PAINTED IT BLACK, HE SAID NO WHEN HE SAW THE TOP THAT IS THE ORIGINAL PAINT WITH A CLEAR COAT.
- 5" Heavy Duty Swivel Multi-Purpose Rotating Bench Vise 360 Degrees Rotation - Swivel Multipurpose Bench Vise A 5-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features Durable Material Built by ductile cast iron, the vise is more durable and hard when in use. Designed for long service time. Powerful Clamping Jaws These jaws adjust well to the workpieces to provide powerful clamping pressure while reducing marring for superior grip..
- 6" Multi-purpose Rotating Heavy Duty Bench Vise Swival 360 Degree - Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" UPC Does not apply Brand Handdo Base Motion Type Swivel Jaw Width 6 in Jaw Opening Capacity 5-1/4 in Material Cast Iron MPN 617993.
- 6" Cross Drill Press Vise Slide Milling Machine 2 Way Movement Clamp Heavy Duty - Application It is suitable for most milling and drilling machines and can easily machine wood and metal parts with high precision and quality. It is widely used in home emergency repair, electrician repair, plumbing repair, automobile repair, non-motorized vehicle repair, machinery repair, etc. Specification Color: Black Material: Cast Iron, Steel Surface Treatment: Plastic Spraying Function: Wire Stripping, Wire Breaking, Wire Rolling Shape: Flat Mouth Applicable Objects: Water Pump, Pipe, Steel Wire, Clamp Table Product Height: 15.5cm/ 6.1in Jaw Depth: 4cm/ 2in Jaw Width: 15.3cm/ 6in Maximum Clamping: 15.7cm/ 6.2in Package Size: 36*36*20cm/ 14.17*14.17*7.87in Net Weight: 14.5kg/ 31.97lbs Gross Weight: 15kg/ 33.07lbs Package Included 1* Vise Clamp Machine 2* Rocker.
- General Purpose Bench Vise 4 in. Jaw 3 in. Max Opening Swivel Base Large Anvil - The Wilton 11104 Bench Vise boasts a 4" jaw width, double lockdowns, and large anvil. General Purpose Bench Vise 4 in. Max Opening Swivel Base Large Anvil. Included Components Bench Vise. LARGE ANVIL: Accommodates a wide range of striking needs.
- 38647 6in Onehand Operation Quick Release Bench Vise - Vise presents a safety Hazard. In adequate operation can result in major injury. Always use a shield or protection. Always wear eye protection. Avoid damp or wet location. Clean vise with a Rag after each use.
- New Soft Jaw Bench Vise Jeweler's Bench Clamp on Hobby Table Vise For Securing - Open capacity is 2-1/2". Multi-Positioning Hobby Vise-Suction.
- Irwin Bench Vise 4″ Jaw Width 2-3/4" Throat Depth 3 - Bench Vise. Jaw Width 4.0000 in. High Visibility No. 155 Center Ct, Venice, FL 34285. Industry Recycles.
- GIBRALTAR Bench & Pipe Combination Vise 3.5″ Jaw W 7″ Jaw O 1-1/2″ TD 59975359 - Bench & Pipe Combination Vise. Jaw Opening Capacity 7 in. Jaw Width 3.5000. Material Cast Iron. This item is new and in great condition. SOLD AS IS. High Visibility No.
- 2.5-inch x 3-3/8-inch Vise High Precision .0002" Hardened and Ground - Product features Jaw width: 2-1/2" Jaw opening: 3-3/8" Jaw depth: 1-1/4" Vise length: 7-1/4" V-groove allows for holding of square and round parts, vertically and horizontally Square and parallel within .0002" (tolerance on handbook is metric) One-piece body construction Hardened and ground Rc 58-62 Precision ground on the front end, rear end, both sides, top and bottom All internal areas precision ground to insure constant accuracy Brand yibei-tech MPN YI69643 UPC Does not apply Base Motion Type Stationary Jaw Width 2-1/2 in Jaw Opening Capacity 3-3/8 in.
- Sanou Mini K01-63 3Jaw 2.5" 63mm M14 Reversable Self-Centering Jaws Lathe Chuck - Sanou Mini K01-63 3Jaw 2.5" 63mm M14 Reversable Self-Centering Jaws Lathe Chuck. Ships next day from USA
- 4" Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Vice New - Product Details: Serrate steel jaws. Oversized striking anvil. Heat treated shaft. 3 Down slots. 360° Double locking swivel base. Product Feature: Precision crafted and designed to provide dependable service and satisfaction. Industrial quality. Heavy duty cast steel construction. Hardened and polished replaceable jaws and large anvil. Swivel base allow you to get the angle on your workpiece. Package including: 4" Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Vice. Note: COLOR MAY VARY.
- Vintage Wilton 745 Swivel Vise 5" Jaws Heavy Duty Made in Illinois - Swivel Vise. Wilton 745. Made in Illinois. Heavy Duty.
- Forward 6-Inch Bench Vise Ductile Iron with Channel Steel and 360-Degree Swiv... - More flexible: 360-degree swivel base with dual locking nuts provides unlimited clamping space and more safety; Tapping work can also be done on the large anvil of the bench vise. Material: Ductile Iron.
- TEXALAN 3.5'' Parrot Vise Multi-Angle Vise - Date First Available: March 23, 2020. Batteries Required?. Batteries Included?.
- Mini Milling Machine Bench Fixture Cross Slide X Y Table Worktable Drill Vise! - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Work Shops Vunder Vise - In very good used condition.
- 5" Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Vice - The vise surface is finished by power coating which makes the vice looks beautiful, it's durable and easy to clean dirt and oil. 1 x Vise(Bolts are not included). Material:Cast iron(body), 45# steel(jaw).
- BESSEY BV-DF5SB 5” Heavy Duty Bench Vise - ThisBESSEY BV-DF5SB 5” Heavy Duty Bench Vise is a heavy duty forged alloy steel bench vise with 5” wide serrated jaws and a max opening of 6-1/2” with a base that rotates 360 °. It is missing a rubber O-ring on the handle.
- Mini X/Y Cross Working Table Worktable Bench Home Micro Milling Drill Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- WORKPRO 4-1/2" Bench Vise Vice for Workbench Utility Combination Pipe Home Vise - Very Stable Bench Vise - It is so easy to install on your bench, so simple in fact that any idiot could do it. It is perfect for small projects and is highly adept at securing tools for sharpening and such.
- Wilton Steel Bench Mount Vise #4 Heavy Duty Cast Iron Machinist Tool
- Wilton Steel Bench Mount Vise #3 Heavy Duty Cast Iron Machinist Workholding Tool
- Drill Press 4inch Cross Slide Vise Drill Press Vise Metal Milling 2 way X-Y - Vise Travel: 5.5". 1x Cross slide vise. Turns your drill press into a milling machine. Maximum Jaw Opening: 3.5". Jaw Width: 4". Precision threaded clamping and cross slide screws. Industrial quality, heavy duty cast steel construction.
- Drill Press 4inch Cross Slide Vise Drill Press Vise Metal Milling 2 way X-Y - Vise Travel: 5.5". 1x Cross slide vise. Turns your drill press into a milling machine. Maximum Jaw Opening: 3.5". Jaw Width: 4". Precision threaded clamping and cross slide screws. Industrial quality, heavy duty cast steel construction.
- Panavise 315 5/16" Circuit Board Holder With Adjustable free standing Base SFB - Vise in preowned condition. The last two or 3 digits in our item title are simply a personal inventory number.
- Vtg Wilton 1760 Tradesman Vise 6" Bullet Swivel Base/Dbl Lock/65 lbs/Base Bolts - Vtg Wilton 1760 Tradesman Vise 6" Bullet Swivel Base/Dbl Lock/Pipe Jaws/65 lbs. Base Bolts Included. No Cracks/Breaks.
- Bench Vise with Swivel Locking Base Bench 5 inch Clamp for Milling Machine Vice - The vise surface is finished by power coating which makes the vice looks beautiful, it's durable and easy to clean dirt and oil. 1 x Vise(Bolts are not included). Material:Cast iron(body), 45# steel(jaw).
- Panavise Multi angle Base Tray 2- 314 Vises Circuit Board Holder 311 Bench Vise - Panavise Multi angle Base Tray 2- 314 Vises Circuit Board Holder 311 Bench Vise, Made in USA.-SOLID. total wt 10.4 lbs Estate of chemical engineer who took care of his equipment. Priority ship $16—-(s13)
- Forward DT08125A 5-Inch Heavy Duty Bench Vise 360-Degree Swivel Base and Head... - Multifunctional: Mounting vise on the workbench, then you could do the work of grinding, cutting, and etc. Tapping work can also be done on the anvil of bench vise. The front jaw can be rotated by 360 degree, more convenient for clamping works.
- Wilton Cbv-65 2-1/2" Light Duty Portable Vise With Clamp-On, Swivel Base - When you need to work on your projects with precision, the Wilton CBV-65 2-1/2" Light Duty Portable Vise is an essential tool. It will keep your materials in place so you can get things done right. The steel top jaw provides excellent support for all types of work pieces.
- 6 inch Tilting and Swiveling Milling Vise with Base Bench 0-90° Clamp Vice - 1 set 6" Tilting and Swiveling Milling Vise (290024). Item Included.
- 22" Extended Hitch Pintle Mount Vise Plate 7-7/8" x 7-7/8", 2"x2" Shank Receiver - 22" Extended Hitch Pintle Mount Vise 7-7/8" x 7-7/8" Plate 2"x2" Square Tube Shank Receiver. · Hitch Type: Pintle. · Need a longer hitch?. See ourFor Hitches Pintle Mount Plate 14 Hole 2" x 12" Shank Receivers 5 Ton.
- Wilton 3" Clamp-On Bench Vise With Stationary Base Model 150 - 3" CLAMP-ON VISE WITH STATIONARY BASE. Jaw Width (In.). Prop 65Cancer and Reproductive Harm. Steel guide bars keep jaws aligned. Type of BaseStationary.
- Vintage REED Bench mount Pipe Vise No. 1A Grips 1/8"- 2" cap. - Made in USA. I will help you as best as I can.
- Drill Press Metal Milling 2 way X-Y Drill Press Vise 4inch Cross Slide Vise - Vise Travel: 5.5". 1x Cross slide vise. Turns your drill press into a milling machine. Maximum Jaw Opening: 3.5". Jaw Width: 4". Precision threaded clamping and cross slide screws. Industrial quality, heavy duty cast steel construction.
- Yost Utility Apprentice Bench Vise Cast Metal Pipe Jaws Steel U-Channel Bar - The Yost Apprentice Bench Vise is designed to fit the needs of general clamping needs. Hand Tool Type Vise. Vise Type Bench. Large anvil work surface. Permanent serrated pipe jaws. Jaw Capacity 5.5 in.
- Yost Utility Apprentice Bench Vise Cast Metal Pipe Jaws Steel U-Channel Bar - The Yost Apprentice Bench Vise is designed to fit the needs of general clamping needs. Hand Tool Type Vise. Vise Type Bench. Large anvil work surface. Permanent serrated pipe jaws. Jaw Capacity 5.5 in.
- Compound Cross Slide Industrial Strength Benchtop & Drill Press Vise - [Wide Jaws Opening]: 3 in: The width of jaw is 3" (75mm); Height of jaw is 1.38" (35mm); Net Weight :15.8lbs (7.2kg). 4 in: The width of jaw is 4’’(100mm), Height of jaw is 1.81’’(46mm); Net Weight:19.8lbs (9kg).
- Vintage “Orphan” Pipe Jaw For Bench Vise - Vintage “Orphan” Pipe Jaw For Bench Vise. This is a “single” pipe jaw for a bench vise. It’s unbranded. Please review all pics to self assess dimensions/condition.Ships fast!
- Columbian Clamp On 3" Bench Vise 33150 - You are looking at a. Columbian Clamp On 3" Bench Vise.
- HeavyDuty Bench Vise Anvil Forged,360 Swivel Locking Base, Multi-Purpose Vise
- Vintage Old Japan Made Home 203 1/2 in Bench Vise, Workholding Tool - Most of them are in used in excellent condition. You will receive the item that's in the pictures.
- Wilton Swivel Mechanics Vise 4.5" Throat 4" Brass Jaw # 3 (Bent Jaw)
- Wilton Steel Swivel Mechanics Vise Z-336 5 Throat 4 Jaw #2 (Bent Handle)
- Baby Wilton 2 Bench Vise Copper Aluminum Soft Jaws Caps - Looks great on a baby Wilton vise but will fit others.063" thick laser cut and vibratory finished, made in USA. Quantity of 1 gets you a pair (front & back) of covers in your choice of material.
- 1PCS NEW ER32 16 mm precision collet forlathe tool and spindle motor
- Early Issue Vise Grips Welder's Tool With No Model Number - A MYSTERY TOOL.
- Columbian # 1655 Woodworkers Vice 5" Jaw Under Bench Mount Cast Aluminum binF
- Heavy Duty Bench Vise Anvil Forged, 360 Swivel Locking Base Desktop Clamp - [JAW]: Replaceable, hardened, forged steel jaws;. [LOCKING BASE]: Double locking swivel base, perfect for turning any direction you want after mounting;.
- 3.5'' Parrot Vise Multi-Angle Vise - [ANY ANGLE]: When the jaw is tightened, the vise rotates throughout 360 degrees and then locks at any angle. [POSITION OF CLAMPING]: It is able to clamp in both upright and horizontal positions.
- PALMGREN 9629745 5” Combination Bench Vise - ThisPALMGREN 9629745 5” Combination Bench Vise is a heavy-duty swivel bench vise with 360 ° rotation. It has a max jaw opening of 6” and a pipe capacity of 1/4" to 2-1/2” with a throat depth of 3-1/2”.
- Panavise Light Duty Multi-Angle Vise 4x Diecast AL Vice Swivel with Tray Base - Swivel Angle: 360 Degrees. Base Type: Swivel. We can’t do it all. UnixsurplusNet - Networking and Components. Number of Mounting Points: 4. OEM and Compatible products.
- Tilting and Swiveling Milling Vise 5 inch Milling Machine Vise with Base Bench - 1 set 5" Tilting and Swiveling Milling Vise(290022). When active mouth of the tongs level migration, above it half sphere can have a vertical downward pressure, therefore the clamp work piece cannot surface the boat.
- Starrett 581S Angle Blocks for 581 Precision Grinding Vise Set of 3 VINTAGE - Starrett 581S Angle Blocks for 581 Precision Grinding Vise. 2 sizes of "v" in each block. picture of book is for reference only. Capacity (mm) :100mm x 32mm.
- Yost Bench & Pipe Combo Vise 8″ Jaw Width x 7-1/2″ Jaw Opening 56399 - Bench & Pipe Combination Vise. Pipe Jaw Included Yes. Features General Purpose; High Strength Construction; Interlocking Swivel Base; Large Anvil; Prevent Pipe Marring, Crushing and Bending; Replaceable Jaw.
- WORKPRO 4-1/2" Bench Vise Swivel Base for Versatile Workbench Pipe Home Projects - Very Stable Bench Vise - It is so easy to install on your bench, so simple in fact that any idiot could do it. It is perfect for small projects and is highly adept at securing tools for sharpening and such.
- WORKPRO 4-1/2" Bench Vise - Versatile Vice for Workbench, Pipe and Home Projects - Very Stable Bench Vise - It is so easy to install on your bench, so simple in fact that any idiot could do it. It is perfect for small projects and is highly adept at securing tools for sharpening and such.
- Vintage Wilton 2” Baby Bullet Vise Built 1972 Chicago, Powrarm Jr Schiller Park - POWRARM made in Schiller Park, ILL. No cracks or repairs. The upper base of the powrarm does not seem to be original, however it looks, fits and operates just fine. Vise made in Chicago, ILL. Grease was added to the parts needing it and the vise was reassembled.
- Work Table Vise Fixture Milling Machine X Y Axis Bench Drill Press Cross Slide - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- MT2 Shank to B16 Adapter Taper Arbor Drill Sleeve w Tang for Tailstock CP - The Morse Taper Sleeve is mainly used in drilling machine and lathe machine. Content : 1 x Reducing Drill Sleeve.
- MT2 Shank to B16 Adapter Taper Arbor Drill Sleeve w Tang Tailstock CP for - The Morse Taper Sleeve is mainly used in drilling machine and lathe machine. Content : 1 x Reducing Drill Sleeve. 100% Money Back. However, we will try our best to minimize it. Color : Silver Tone.
- ER32 16 mm precision collet for CNC milling lathe tool and spindle motor 1pcs - Model: ER32 - 16 mm. ( 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11 mm, 12mm, 1 3mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 3.175mm ). We also have other size as follow red words. 100% Money Back. AU Automation Mall.
- 1PCS ER32 16 mm precision collet forlathe tool and spindle motor NEW - (Model: ER32 - 16 mm. ( 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11 mm, 12mm, 1 3mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 3.175mm ). We also have other size as follow red words. excluded.).
- Truper TA-6-L Bench vise 6" european type nodular iron - Bench vise 6" european type nodular ironDescription:- Gag width: 6 "(15 cm)- Maximum opening: 5 7/8 "(15 cm)- Throat depth: 71 mm- Weight: 9.3 kg- Individual packaging: boxFeatures:- Molten in high -strength nodular iron- Steel jaws dabted for a better grip- Light and compact- Rotating base for multi-reposition of the screw
- Truper TC-16 Carpenter's vise 16" - Carpenter's vise 16"Description:- Maximum opening: 16 "(41 cm)- Length: 520 mm- Weight: 3.6 kg- Individual packaging: boxFeatures:- 2 -pieces molten in gray iron with machine spindle
- Truper TA-5-L Bench vise 5" european type nodular iron - Bench vise 5" european type nodular ironDescription:- Gag width: 5 "(13 cm)- Maximum opening: 4 7/8 "(12 cm)- Throat depth: 68 mm- Weight: 7 kg- Individual packaging: boxFeatures:- Molten in high -strength nodular iron- Steel jaws dabted for a better grip- Light and compact- Rotating base for multi-reposition of the screw
- Truper TA-8-L Bench vise 8" european type nodular iron - Bench vise 8" european type nodular ironDescription:- Gag width: 8 "(20 cm)- Maximum opening: 7 7/8 "(20 cm)- Throat depth: 82 mm- Weight: 14.3 kg- Individual packaging: boxFeatures:- Molten in high -strength nodular iron- Steel jaws dabted for a better grip- Light and compact- Rotating base for multi-reposition of the screw
- Pretul TB-6P Bench vise 6" gray iron - Bench vise 6" gray ironDescription:- Gag width: 6 "(15 cm)- Maximum opening: 5 1/2 "(14 cm)- Weight: 11.6 kg- Individual packaging: boxFeatures:- Molten in Gray Iron- Steel jaws dabted for a better grip- 360 ° rotating base for multi-consciousness of the screw
- Truper TA-6 Bench vise 6" nodular iron industrial use - Bench vise 6" nodular iron industrial useDescription:- Gag width: 6 "(15 cm)- Maximum opening: 6 7/8 "(17 cm)- Throat depth: 110 mm- Weight: 24.2 kg- Individual packaging: boxFeatures:- Molten in High Resistance Nodular Iron for Heavy Work- Steel jaws dabted for a better grip- Round lower jaws, to hold tubes without damaging them- 360 ° rotating base for multi-consciousness of the screw
- Pretul TB-5P 5" gray iron bench vise - 5" gray iron bench viseDescription:- Gag width: 5 "(13 cm)- Maximum opening: 5 "(13 cm)- Weight: 7.4 kg- Individual packaging: boxFeatures:- Molten in Gray Iron- Steel jaws dabted for a better grip- 360 ° rotating base for multi-consciousness of the screw
- Truper TA-5 Bench vise 5" nodular iron industrial use - Bench vise 5" nodular iron industrial useDescription:- Gag width: 5 "(13 cm)- Maximum opening: 5 1/2 "(14 cm)- Throat depth: 95 mm- Weight: 17 kg- Individual packaging: boxFeatures:- Molten in High Resistance Nodular Iron for Heavy Work- Steel jaws dabted for a better grip- Round lower jaws, to hold tubes without damaging them- 360 ° rotating base for multi-consciousness of the screw
- Truper TA-8 Bench vise 8" nodular iron industrial use - Bench vise 8" nodular iron industrial useDescription:- Gag width: 8 "(20 cm)- Maximum opening: 7 7/8 "(20 cm)- Throat depth: 110 mm- Weight: 30 kg- Individual packaging: boxFeatures:- Molten in High Resistance Nodular Iron for Heavy Work- Steel jaws dabted for a better grip- Round lower jaws, to hold tubes without damaging them- 360 ° rotating base for multi-consciousness of the screw
- Truper TA-4-L Bench vise 4" european type nodular iron - Bench vise 4" european type nodular ironDescription:- Gag width: 4 "(10 cm)- Maximum opening: 4 "(10 cm)- Throat depth: 60 mm- Weight: 4.2 kg- Individual packaging: boxFeatures:- Molten in high -strength nodular iron- Steel jaws dabted for a better grip- Light and compact- Rotating base for multi-reposition of the screw
- Pretul TB-8P 8" gray iron bench vise - 8" gray iron bench viseDescription:- Gag width: 8 "(20 cm)- Maximum opening: 6 "(15 cm)- Weight: 20.9 kg- Individual packaging: boxFeatures:- Molten in Gray Iron- Steel jaws dabted for a better grip- 360 ° rotating base for multi-consciousness of the screw
- Truper TA-4 Bench vise 4" nodular iron industrial use - Bench vise 4" nodular iron industrial useDescription:- Gag width: 4 "(10 cm)- Maximum opening: 5 "(13 cm)- Throat depth: 90 mm- Weight: 11.4 kg- Individual packaging: boxFeatures:- Molten in High Resistance Nodular Iron for Heavy Work- Steel jaws dabted for a better grip- Round lower jaws, to hold tubes without damaging them- 360 ° rotating base for multi-consciousness of the screw
- 4" Cross Drill Press X-Y Clamp Machine Vise Metal Milling Slide 2 Way US STOCK - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Bench Drill Press Vise Cross Slide Compound X Y Axis Milling Machine Table - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- 6" Cross Sliding Vise Heavy Duty X-Y Clamp Drill Press Meta Milling Machine Vise - This 6" vise clamp machine will easily turn your drill press into a milling machine! 1 Vise Clamp Machine. Jaw Depth: 4cm/ 2in. Jaw Width: 15.3cm/ 6in. Applicable Objects: Water Pump, Pipe, Steel Wire, Clamp Table.
- 5 inch Cross Sliding Vise High Accurate Table Drilling Machine Flat Nose Pliers - This cross vise can easily turn your drilling machine into a milling machine. Item Type: Cross Sliding Vise. 1 x Cross Sliding Vise. 2 x Vise Wrench. Jaw Size: 5in. Wide range of applications, widely used in various table drills, drilling machines, etc.
- Vintage Sears Vise 506-51770
- 2pcs 5" Aluminum Vise Jaws with Magnetic Rubber Pads Covers for Woodworking - The caps are made of aluminum alloy steel, durable to use and smooth surface.The pads are made of soft rubber, with rhombus anti-slip patterns, stable clamping and do not shake.There are embedded magnets, can be firmly attached to the jaws of the bench vise.Drawer design, easy to install and disassemble.The vise jaws can hold wood, metal, plastic, pipe and threaded objects to protect most flat, round or irregular products.Specification:Total Size: 127mm x 28.5mm x 25mm / 5" x 1.12" x 0.98" (L*W*H)Material: Aluminum Alloy Steel, RubberColor: Silver Tone, BlackPackage Content:1 Pair (2 Pcs) x Magnetic Vise Jaws.
- Wilton Steel Swivel Bench Vise 5″ Opening Cap 11105 - Steel Swivel Bench Vise. Vise creaks a little when opening and closing for unknown reasons . Base Motion Type Swivel. Features Double Lock Down Swivel Base; General Purpose; Large Anvil. Material Steel.
- 4" Cross Slide Drill Press X- Y Compound Vise Bench Metal Milling Heavy Duty NEW - Description Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. The top and bottom cross slide vise with bi-directional movement allows easy machining of high precision and quality wood and metal parts. Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Dayton 4Tk07 4" Machine Vise With Angle Base - Brand new just opened box for pictures
- VINTAGE MONARCH No. 218 VISE w/ 4 1/2'' JAWS Lions Head Prentiss - needs base - We will do our best to work with you and to resolve this issue.
- Work Shops Vunder Vise - Work Shops Vunder Vise. In pretty good shape. Any questions that the pictures don't answer just ask. Will combine shipping when asked and possible.
- 4inch Heavy-duty Tilting Precision Angle Flat-nose Pliers Milling Machine Tool
- Cross Slide Vise 4" inch Wide Drill Press X - Y Clamp Milling Heavy Duty USA NEW - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Stanley Bench Vise # 761 Vintage Original Usa - BENCH VISE.
- Dunlap Vise 05 241 Vintage Original Usa - 241 BENCH VISE.
- Sears Bench Vise 3 1/2 Model391 . 5178 Complete Intact Vint. Japan - 3 1/5 BENCH VISE.
- Vintage Vise Jaws - Works fine. See pictures. Local pick up is fine Portland Oregon.
- Vise 2-1/2 x 3-3/8" .0002" Vise High Precision Hardened and Ground - Product features: Jaw width: 2-1/2" Jaw opening: 3-3/8" Jaw depth: 1-1/4" Vise length: 7-1/4" V-groove allows for holding of square and round parts, vertically and horizontally Square and parallel within .0002" (tolerance on handbook is mtric) One-piece body construction Hardened and ground Rc 58-62 Precision ground on the front end, rear end, both sides, top and bottom All internal areas precision ground to insure constant accuracy Brand ALL-CARB MPN Does Not Apply Warranty 1 year UPC Does not apply Type Vise Modified Item No Modification Description No.
- 6" Multi-purpose Rotating Heavy Duty Bench Vise Swival 360 Degree - Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" Brand ALL-CARB MPN Does Not Apply Warranty 1 year Base Motion Type Swivel Jaw Width 6 in Jaw Opening Capacity 5-1/4 in Material Cast Iron UPC Does not apply Type Bench Vise Bundle Description No Modified Item No Modification Description No.
- 6 Inch Heavy Duty Multi-purpose Rotating Bench Vise Swival 360 Degree - Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" Brand ALL-CARB MPN Does Not Apply Warranty 1 year Base Motion Type Swivel Jaw Width 6 in Jaw Opening Capacity 5-1/4 in Material Cast Iron UPC Does not apply Type Bench Vise Bundle Description No Modified Item No Modification Description No.
- PONY 5-inch Heavy-Duty Bench Vise Utility Combination Pipe Vise 360° Swivel Base - Stable Bench Vise: It is easy to install on your bench, simple and features with 3 fixed mounting tabs to help secure the bench vise on the table. Strong Iron Construction: The 5" bench vise features with a solid gray iron construction, more durable and harder than others bench vise that made of ordinary materials.
- PONY Heavy-Duty Bench Vise 5-inch Utility Combination Pipe Vise 360° Swivel Base - Stable Bench Vise: It is easy to install on your bench, simple and features with 3 fixed mounting tabs to help secure the bench vise on the table. Strong Iron Construction: The 5" bench vise features with a solid gray iron construction, more durable and harder than others bench vise that made of ordinary materials.
- PONY Bench Vise 5-in Heavy-Duty Utility Combination Pipe Vise Swivel Base Bench - Stable Bench Vise: It is easy to install on your bench, simple and features with 4 fixed mounting tabs to help secure the bench vise on the table. Strong Iron Construction: The 5" bench vise features with a solid gray iron construction, more durable and harder than others bench vise that made of ordinary materials.
- PONY 5-in Heavy-Duty Bench Vise Utility Combination Pipe Vise Swivel Base Bench - Stable Bench Vise: It is easy to install on your bench, simple and features with 4 fixed mounting tabs to help secure the bench vise on the table. Strong Iron Construction: The 5" bench vise features with a solid gray iron construction, more durable and harder than others bench vise that made of ordinary materials.
- Manual Flat Pliers 2-1/2 x 3-3/8" Vise High Precision 0.0002 - Product features: Jaw width: 2-1/2" Jaw opening: 3-3/8" Jaw depth: 1-1/4" Vise length: 7-1/4" V-groove allows for holding of square and round parts, vertically and horizontally Square and parallel within .0002" (tolerance on handbook is mtric) One-piece body construction Hardened and ground Rc 58-62 Precision ground on the front end, rear end, both sides, top and bottom All internal areas precision ground to insure constant accuracy Brand ALL-CARB MPN Does Not Apply Warranty 1 year UPC Does not apply Type Vise Modified Item No Modification Description No.
- Vise 2-1/2 x 3-3/8" Vise High Precision .0002" Hardened and Ground - Product features: Jaw width: 2-1/2" Jaw opening: 3-3/8" Jaw depth: 1-1/4" Vise length: 7-1/4" V-groove allows for holding of square and round parts, vertically and horizontally Square and parallel within .0002" (tolerance on handbook is mtric) One-piece body construction Hardened and ground Rc 58-62 Precision ground on the front end, rear end, both sides, top and bottom All internal areas precision ground to insure constant accuracy Brand ALL-CARB MPN Does Not Apply Warranty 1 year UPC Does not apply Type Vise Modified Item No Modification Description No.
- 2-1/2 x 3-3/8" Vise High Precision .0002" Hardened and Ground - Product features: Jaw width: 2-1/2" Jaw opening: 3-3/8" Jaw depth: 1-1/4" Vise length: 7-1/4" V-groove allows for holding of square and round parts, vertically and horizontally Square and parallel within .0002" (tolerance on handbook is mtric) One-piece body construction Hardened and ground Rc 58-62 Precision ground on the front end, rear end, both sides, top and bottom All internal areas precision ground to insure constant accuracy Brand ALL-CARB MPN Does Not Apply Warranty 1 year UPC Does not apply Type Vise Modified Item No Modification Description No Modification Description No.
- Yost Vises Bench and Pipe Combo Vise 5-1/8″ Jaw Width 56432 - Yost Vises. Bench & Pipe Combination Vise. Features Large Anvil; Replaceable Jaw; Securing Vise Base; Twelve Different Locking Positions. Pipe Jaw Included Yes. Includes (3) Set of Replaceable Hardened Steel Jaw.
- PONY Bench Vise 5" Heavy-Duty Utility Quick Release with 360 degree Swivel Base - Stable Bench Vise:I t is easy to install on your bench, simple and features with 3 fixed mounting tabs to help secure the bench vise on the table. Strong Iron Construction: The 5" bench vise features with a solid gray iron construction, more durable and harder than others bench vise that made of ordinary materials.
- Vise 2-1/2 x 3-3/8" Vise High Precision .0002" Hardened and Ground - Product features: Jaw width: 2-1/2" Jaw opening: 3-3/8" Jaw depth: 1-1/4" Vise length: 7-1/4" V-groove allows for holding of square and round parts, vertically and horizontally Square and parallel within .0002" (tolerance on handbook is mtric) One-piece body construction Hardened and ground Rc 58-62 Precision ground on the front end, rear end, both sides, top and bottom All internal areas precision ground to insure constant accuracy Brand ALL-CARB MPN Does Not Apply Warranty 1 year UPC Does not apply Type Vise Modified Item No Modification Description No Modification Description No.
- PONY Bench Vise 5" Heavy-Duty Utility Combination One-Pair Vise Jaw Pad Included - Stable Bench Vise: It is easy to install on your bench, simple and features with 4 fixed mounting tabs to help secure the bench vise on the table. Strong Iron Construction: The 5" bench vise features with a solid gray iron construction, more durable and harder than others bench vise that made of ordinary materials.
- Vise 2-1/2 x 3-3/8" .0002" Vise High Precision Hardened and Ground - Product features: Jaw width: 2-1/2" Jaw opening: 3-3/8" Jaw depth: 1-1/4" Vise length: 7-1/4" V-groove allows for holding of square and round parts, vertically and horizontally Square and parallel within .0002" (tolerance on handbook is mtric) One-piece body construction Hardened and ground Rc 58-62 Precision ground on the front end, rear end, both sides, top and bottom All internal areas precision ground to insure constant accuracy Brand munirater MPN Does Not Apply Warranty 1 year UPC Does not apply Type Vise Modified Item No Modification Description No.
- Manual Flat Pliers 2-1/2 x 3-3/8" Vise High Precision 0.0002 - Product features: Jaw width: 2-1/2" Jaw opening: 3-3/8" Jaw depth: 1-1/4" Vise length: 7-1/4" V-groove allows for holding of square and round parts, vertically and horizontally Square and parallel within .0002" (tolerance on handbook is mtric) One-piece body construction Hardened and ground Rc 58-62 Precision ground on the front end, rear end, both sides, top and bottom All internal areas precision ground to insure constant accuracy Brand ALL-CARB MPN Does Not Apply Warranty 1 year UPC Does not apply Type Vise Modified Item No Modification Description No Modification Description No.
- Ridgid B-Y-2-A Yoke Pipe Vise 1/8" to 2" - Good jaws, good used as pictured condition.
- Used Wilton Drill Press Vise Model 30
- 6" Angle Vise With 2-Way Swivel Movement (3900-0019) - 6" 2-Way Swivel Movement Angle Vise ~ Positive locking to withstand heavy loads. ~ 360° horizontal swivel movement. ~ 90° vertical swivel movement. ~ Totally enclosed acme thread screw. ~ Hardened and ground jaws. ~ Vises are supplied with plain jaws. ~ The base T-slot width is 0.71". ~ Vise handle included. ~ Depth of jaws is 1.97". ~ Opening of jaws is 5". ~ Angle height is 7.5". ~ Overall length is 16.2". ~ Maximum width is 9.8".
- Heavy Duty Bench Vise Swivel Base & Rotating Head Mechanic Shop Clamping Work - Great for clamping and fixing workpiece: Higher clamping force; Longer opening; Bigger anvil; Deeper throat depth; Wider jaw; Round workpiece clamping; Microgroove tooth space for better grip; 360 degree swivel base providing unlimited clamping space.
- Vintage Wilton 121070 4" Vise Bench Table Mount Swivel Base
- Vintage Small Portable Vacu Vise by General 4" tall x 4 1/4" Wide Base USA - This item is a Vintage Small Portable Vacu Vise by General Jaw Measures 2 1/2" Wide. Made in USAOverall measurement is 4" tall x a 4 1/4" x 5" base. Vise weighs just under 4 pounds.Good used condition and the Jaws open and close great.The rubber pad Vacuum does not seem to hold but the weight of the vise would hold it unless you are working on something really heavy.The jaws open to about 1-3/4"
- NEW Gibraltar 63493266 XTMV/ST/4 2-3/4" Jaw Toomaker Screwless Vise, 3.5" Open. - Jaw Height1.5625 in - 1-9/16 in. Jaw Opening Capacity3 in. Jaw ShapeFlat. Jaw Width2-3/4 in. Squareness5 in. Parallelism3 in. Overall Length254 mm.
- Excellent 4-1/2" Columbian Mechanic Machinist Bench Vise From A Kansas Estate - STATIONARY BASE (NOT SWIVEL). POSSIBLY NEVER MOUNTED?. VERY, VERY NICE. THE ITEM YOU ARE VIEWING IS THE ITEM YOU WILL RECEIVE. NEVER A RESERVE.
- 6-inch Heavy Bench Vise Flat Vise Guide Rod Type Heavy Vise Clamp - Model vise length vise height biggest jaw opening jaw width jaw height weight. Precision guide rod type heavy vise clamp. 1 set 4&6"guide rod type heavy vise clamp (290047 290050). Hope for your understanding.
- 3" Heavy Duty Bench Vice Clamp Work Bench Vise Anvil Swivel Base Jaw Grip Powder - Small anvil included. Made of high-quality cast iron body and steel jaw. When an ideal position is found, rotate the bolt knob to fix it at any angle. Featuring galvanized thick screw that works so smoothly, equipped with softer textures for hassle-free usage.
- Powder Coated 4" Bench Vice Clamp Workbench Vise Anvil Swivel Base Jaw Grip 10cm - Small anvil included. Made of high-quality cast iron body and steel jaw. When an ideal position is found, rotate the bolt knob to fix it at any angle. Featuring galvanized thick screw that works so smoothly, equipped with softer textures for hassle-free usage.
- Powder Coated 5" Bench Vice Clamp Workbench Vise Anvil Swivel Base Jaw Grip - Small anvil included. Made of high-quality cast iron body and steel jaw. When an ideal position is found, rotate the bolt knob to fix it at any angle. Featuring galvanized thick screw that works so smoothly, equipped with softer textures for hassle-free usage.
- Powder Coated 6" Bench Vice Clamp Workbench Vise Anvil Swivel Base Jaw Grip 15cm - Small anvil included. Made of high-quality cast iron body and steel jaw. When an ideal position is found, rotate the bolt knob to fix it at any angle. Featuring galvanized thick screw that works so smoothly, equipped with softer textures for hassle-free usage.
- Vintage Wilton Shop King 3-1/2" Bench Vise - Bench Vise.
- Diy Mini CNC Vise Aluminium Alloy Flat Tongs Drill Fixture Milling Machine Bench - 1 X Flat Tongs(with screw). Maximum holding width: 110mm (maximum clamp length is not limited). Width of clamp: 140mm. Length of clamp: 165mm (215 length of handle). scale function, optical axis guide rail, high precision, surface oxidation.
- Vise Flat Nose Pliers Table Pliers Clamps Worktable Fastening Plates Fixture - 1 wood carving small vise. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. Net weight: 0.3kg.
- TITAN 22013 - 5" Inch Bench Vise - TITAN 22013 -. Jaw width: 5". Jaw opening: 5". Swivel base with position lock. Incorporated anvil.
- TITAN 22012 - 5" Inch Swivel Vise - TITAN 22012 -. Jaw width: 5". Jaw opening: 5". Hardened steel jaws rotate 360 degrees. Jaws rotate for clamping at any angle. Serrated pipe jaws. Incorporated anvil.
- Columbian 5" Solid Mount Bench Vice - No matter the make or model of your vehicle, we've likely got the part you need. Whether you're looking for a simple, inexpensive wheel nut or a complete differential (or anything in-between), we've probably got it!
- QGG 73/3" Machine Vise Manual Vise Bench Vise CNC Vise Grinding Machine Tool - Model: QGG73/3". G.W: 5.3kg size:20.5 7cm. N.W: 5.2kg. pe rpendicularit: 0.005mm.
- Vintage Dunlap Tools #5241 Swivel Base Bench Vise 3-1/4” Jaws W/Anvil, USA - Good working condition. Handle is slightly bent.
- Palmgreen Multi Jaw Rotating Vice 5" Jaws With 4" Opening FREE SHIPPING - The item you are purchasing is a Palmgreen Multi Jaw Rotating Vice 5" Jaws With 4" Opening.
- Restored Vintage Columbian D 33 1/2 Bench Vise USA 3 1/2" - My dad bought this vise new around 1962, probably at the local Ace Hardware. We both used it a bunch, building a go-kart and mini-bike and much more. I don’t recall how I was misusing it, probably trying to bend a 5’ long 1” steel rod or similar, but the swivel base broke.
- 5'' Accu Lock Precision Vise with 360 Degree Swivel Base Bench Clamp - Jaw Width Jaw Opening Jaw Height Swivel Base 360 Degree. Clamping Force Unit Weight.
- 5" Accu Lock Precision Vise with 360 Degree Rotating Base Milling Lockdown Vise - Jaw Width: 5". Jaw Opening: 5". Jaw Height: 1-3/8" Estimate Only . Base Swivel: 360 Degree.
- 5'' Accu Lock Precision Vise w/ Swivel Base Milling Drilling Machine Bench Clamp - 5" Accu Lock Precision Swivel Base Vise. Jaw Width: 5". Jaw Opening: 5". Jaw Height: 1-3/8" Estimate Only . Base Swivel: 360 Degree. Clamping Force: 24 KN max. Unit Weight: 50 Lbs Estimate Only .
- 5" Bench Vise Swivel Locking Base Table Clamp Heavy Duty Vice 360° - Base stable design, can be fixed with screws, chassis locking setting can effectively fix the base. [Locking Base] Base stable design, can be fixed with screws, chassis locking setting can effectively fix the base.
- 2 Axise Work Table Bench Drill Press Vise Fixture Cross Slide Milling Machine - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Milling Machine Work Table Cross Slide X Y Axis Bench Drill Press Vise Fixture - The mini multi-functional working table is essential tool for mini bench drill, electric drill stand, milling machine and drilling machine. ☆ Very useful tool for electric drill, mini bench drill, milling machine and drilling machine.
- 4" Horizontal/Vertical Machine Vise - Holds Shafts & Round Parts (3900-1720) - 4" Horizontal/Vertical Machine Vise. Vise has an adjustable sliding rod to set work in it's proper position. Vise ends are ground so that it can be used vertically or horizontally. Perfect for holding shafts & round parts.
- GOEHNER's Bench Vise 3.3" w/ 360°Swivel Vice Base And Heavy Duty Table Clamp
- Ken-Tool 14656U - Center Bolt for KT4800 (64800) Professional Mechanic Vise - Ken-Tool 14656U - Center Bolt for. - Center Bolt (14656U).
- Ken-Tool 16508 - Swivel Base Plate for K65 (64065) Professional Workshop Vise - Swivel Base Plate (16508).
- OPEN BOX Brink & Cotton by Wilton Vacuum Base Vise Item #63500 - Brink & Cotton by Wilton Vacuum Base Vise.
- Cross Slide Drill Press Vise X-Y 2Axis Compound Work Table Vise Bench Portable - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Multifunction Machine Vise Worktable Milling Working Table Aluminium Alloy - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- 22" HITCH MOUNT VISE PLATE 7-7/8" x 7-7/8" BUFFER GRINDER HOLDER - Vise Mount Plate: 7-7/8" x 7-7/8". Vise Mounting Holes: 1-7/8" x 5/8" W (4). Hitch Pin and Mounting Bolts Screws are included. Square Steel Tube 22"L x 2". arsenic and chromium from chemically treated lumber.
- 22" EXTENDED HITCH MOUNT VISE PLATE 7-7/8" x 7-7/8" BUFFER GRINDER HOLDER - Vise Mount Plate 7-7/8"L x 7-7/8"W x 3/16". Vise Mounting Holes 1-7/8"L x 5/8"W. Hitch Pin and Mounting Bolts Screws are included. Fit any standard 2" hitch receiver. 2" Square Tube 22" Length. arsenic and chromium from chemically treated lumber.
- 4" Rotating Bench Vise Swival 360 Degree Cast Iron Multi-purpose - Product Description These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face. This vise features a jaw opening scale and rotation scale. The jaw opening scale is used to approximate the jaw opening size while the rotation scale provides approximate angle readings through 180-degrees. Features Rotating jaws Rotating base Jaw opening scale Rotation scale Base locking lever .
- Milling Machine Vise Tilting Guide Rod Flat-nose Pliers Machine Bench Vise Clamp - 3"/4" Precision Milling Machine Vise Tilting Guide Rod Angle Flat-nose Pliers Tilting Pliers Drilling Machine Bench Vise Clamp.
- Vtg Solid Metal Drill Press/Bench VISE - 2⅝" Wide Jaws, Jaw Opening 3⅝" ~8 Lb - Jaws Operate Smoothly, Has 2 Bolt Notches for attaching to Workbench ---. Vise w/Jaws Open is:11 ⅛" Long by 3 ” High (at Jaws ) by 2 ⅝ " Wide (at Jaws ). Vise w/Jaws Closed is:8 ½ " Long by 5 ½ ” High (at Handle ) by 4 ½ " Wide (at Hold Down Points ).
- Restored Vintage C. Parker Model 87 3 1/2 Swivel Bench Vise - Restored Vintage C. Parker Model 87 3 1/2 Swivel Bench Vise. No cracks no issues beautiful 100 year old vise.
- 4" Cross Slide Vise Drill Press Metal Milling 2 Way Clamp Vise Kit For Repairing - Specification Material: Carbon Steel, Cast Iron Process: Spraying Color: Black Opening Degree: 9cm/3.5in Jaw Width: 10cm/3.9in Jaw Depth:3.7cm/1.45in Maximum Clamping: 7.3cm/2.87in Base Plate Hole Distance: 12.5cm/4.9in Longitudinal Travel: 10cm/3.9in Transverse Travel: 12cm/4.72in Net Weight: 10kg/22.04lbs Gross Weight:10.5kg/23.14lbs Package Size:29*29*15.5cm/11.41*11.41*6.10in Product Height:13.7cm/5.39in.
- Wilton 4.5" PowRscrew vise manual over hydraulic - (one) Wilton 4-1/2” PowRscrew manual over hydraulic vise. Local Pickup D-23670, 71, 72, 73, 74. FREE scheduling, supersized images.
- Findmall 6" Multi-purpose Rotating Heavy Duty Bench Vise Swival 360 Degree - Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" Package including： 6" Multi-purpose Rotating Bench Vise Swival 360 Degree Heavy Duty .
- Wilton 5" C2 Vise Swivel Base, Used, Good Condition - Removed from vise to stationary mount.
- Top Screw Bench Chain Vises, 1/2 In - 8 In Pipe Cap - Rugged cast-iron base has handy pipe rest and bender. We will respond to you within 24 hours and do our best to help you out! We are not responsible for any cost of labor for installation or set-up.
- Top Screw Bench Chain Vises, 1/8 In - 4 In Pipe Cap - Rugged cast-iron base has handy pipe rest and bender. We will respond to you within 24 hours and do our best to help you out! We are not responsible for any cost of labor for installation or set-up.
- Yost Work Bench Vise Cast Metal Heavy Duty 3-1/2 in. Jaw Width x 4 in. Opening - The base includes three bolt lugs for versatility in mounting on a drill press table. The steel adjusting screw has a coarse-pitch thread for fast action. The movable jaw is grooved vertically as well as horizontally for convenience in holding round pieces.
- Unbranded Rotatable Bench Vice 6" - Product was never actually used or installed. See pictures. LOW PRICE! Why buy through us?. Have an issue?.
- Wilton 1765 6-1/2" Tradesman Vise, 4" Throat (28807) - The tradesman round channel vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut The tradesman round channel vise nut is anchored at the rear which provides straight line pull and even pressure resulting in greater durability.
- 3 inch/4 inch Precision Milling Machine Vise Tilting Angle Flat-nose Pliers - 3"/4" Precision Milling Machine Vise Tilting Guide Rod Angle Flat-nose Pliers Tilting Pliers Drilling Machine Bench Vise Clamp.
- Vintage White Gate Distressed Vise Woodworking Wood Bench WhiteGate Table
- Ken Tools 64065 - K65 Professional Workshop Vise - 6-1/2" Jaw - Ken Tools 64065 -. Jaw Width: 6-1/2" (16.5 cm). Jaw Opening: 9" (22.9 cm). Pipe jaw Capacity: 1/8" - 3 1/2" (.3-8.9 cm).
- Wilton Model 76653-03 - 4" Bench Vise - Wilton Model 76653-03 - 4" Bench ViseNice used condition One of the screws for the jaws is not original Replacement screw is not stuck and vice has not been modified to make it work Any questions please ask
- ONE NEW ER32 16 mm precision collet forlathe tool and spindle motor - Model: ER32 - 16 mm. ( 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11 mm, 12mm, 1 3mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 3.175mm ). We also have other size as follow red words.
- 1PC NEW ER32 16 mm precision collet forlathe tool and spindle motor - Model: ER32 - 16 mm. ( 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11 mm, 12mm, 1 3mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 3.175mm ). We also have other size as follow red words.
- 1PCS MT2 Shank to B16 Adapter Taper Arbor Drill Sleeve NEW - The Morse Taper Sleeve is mainly used in drilling machine and lathe machine. Content : 1 x Reducing Drill Sleeve. 100% Money Back.
- Wilton USA Mechanics or Machinist Bench Vise 4” Jaws 111055 111056 W Swivel Base - Actual item pictured.
- 4 in Cross Slide Drill Press Vise X-Y Compound Bench Vise Metal Milling Clamping - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 4" Drill Parallel-jaw Press Vise Flat Tongs Bench Drill Press Mini Drilling Vice - It also with scale function and optical axis guide rail, high precision. Usually used in milling machine, drill press and machinery maintenance, etc. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing.
- 6" New Mechanic Bench Vise Table Top Clamp Press Locking Swivel Base Heavy Duty - Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" What's in the package?.
- 6" Mechanic Bench Vise Table Top Clamp Press Locking Swivel Base Heavy Duty - Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" What's in the package?.
- Bench Vise W/ Anvil Swivel 4in Locking Base Tabletop Clamp Heavy Duty Steel New - Product Details: Serrate steel jaws. Oversized striking anvil. Heat treated shaft. 3 Down slots. 360° Double locking swivel base. Product Feature: Precision crafted and designed to provide dependable service and satisfaction. Industrial quality. Heavy duty cast steel construction. Hardened and polished replaceable jaws and large anvil. Swivel base allow you to get the angle on your workpiece. Package including: 4" Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Vice. Note: COLOR MAY VARY.
- 4" Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Vice - Product Details: Serrate steel jaws. Oversized striking anvil. Heat treated shaft. 3 Down slots. 360° Double locking swivel base. Product Feature: Precision crafted and designed to provide dependable service and satisfaction. Industrial quality. Heavy duty cast steel construction. Hardened and polished replaceable jaws and large anvil. Swivel base allow you to get the angle on your workpiece. Package including: 4" Bench Vise with Anvil Swivel Locking Base Table top Clamp Heavy Duty Vice. Note: Color May Vary..
- Vintage Technical Devices Circuit Board Holder Base Panavise - Made by Technical Devices of Colver City California. Heavy Weighted Base.
- 4" Cross Slide Drill Press Vise X-Y Compound Bench Vise Metal Milling Clamping - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- 3/4Vise Tilting Guide Rod Angle Flat-nose Pliers Tilting Pliers Drilling Machine - 3"/4" Precision Milling Machine Vise Tilting Guide Rod Angle Flat-nose Pliers Tilting Pliers Drilling Machine Bench Vise Clamp.
- 4" CROSS DRILL PRESS Vise 2 Way X-Y Clamp Heavy Duty Machine Slide Metal Milling - Our cross slide vise is suitable for surface grinders, milling machines, EDM, and WEDM machines. This cross slide vise is made of high-quality cast iron, while the jaws are made of carbon steel. It is suitable for most milling machines and drilling machines.
- Grizzly G7060 Bench Vise w/ Anvil - 6" - G7060 Bench Vise w/ Anvil - 6". This tough vise is ideal for all bench work applications. Other features include large screw, anvil face and 0 degree - 90 degrees swivel. This vise is a bargain at twice the price!
- Grizzly H7662 3-1/8" Swiveling Cam Vise - H7662 3-1/8" Swiveling Cam Vise. Jaw size: 3-1/8" W x 1" D.
- Shop Fox D4328 Quick Release Vise - 9" Jaw - D4328 Quick Release Vise - 9" Jaw. Has 9" jaws and a 10-1/4" maximum opening.
- Shop Fox D4920 Premium 7" Quick-Release Woodworking Vise - The D4920 Premium 7" Quick-Release Woodworking Vise is designed to flush-mount into workbenches 2-1/4" thick. The complete and easy-to-read instructions make it easier to assemble and maintain your vise.
- 8" Bench Vise with Swivel Locking Base 360 Degrees Durable Cast Steel Blue - It is ideal for providing maximum clamping and holding power. New Heavy duty 8" bench vise. One Set8" Bench Vise with Swivel Locking Base. Jaw Width: 8". 360 degree Swivel Locking base ideal for turning in any direction as desire after mounting.
- Wilton Bench Vise w/ Swivel Base 6" Jaw Width 6" Opening Capacity 11106 Damaged - Bench Vise. Jaw Width - 6". Throat Depth - 3". Base Type - Swivel. Opening Capacity - 6".
- Mini Milling Machine Work Table 2 Axis Cross Slide Bench Drill Vise Fixture - X axis travel : 200mm. Y axis travel : 50mm.
- Vintage Columbian Swivel Anvil 3 1/2” Jaw - Bench Vise D43 1/2 M5 - Vintage Columbian Swivel Bench Vise D43 1/2 M5. Condition is "Used".Expect some kind of wear from use and age. Listing is for what you see in picture. Good condition!
- 3"/4" Precision Milling Machine Vise Tilting Guide Rod Angle Flat-nose Pliers
- Vintage Craftsman 2437-26Z Machinist Vise - It is in good as found condition. It has been repainted. It has a casting flaw or drill mark on the inside near the slot. 3 1/8" opening. 2 1/4" jaws.
- Vintage Columbian 405 4.5" Jaw Stationary Base Opens 6.5" Weighs 47# Net // F1 - Columbian Vise & Mfg. Co. Stationary Bench Vise. 4.5” wide jaw. Location F1. Opens 6.5". Weight – 47# Net. Used Take Out. No Warranty.
- Dayton 6Z848 6" Machine Vise With Fixed Base NOS - Machine Vise, Cross Vise, Fixed Base, Jaw Width (In.). 6 in, Jaw Opening (In.). 6 in, Throat Depth (In.). 2 in, Max. Travel 8 in in Both X and Y Directions, Jaw Deflection 0.002 in @ 2000 lbs, Cross and Longitudinal Handle Rotates Above Machine Table Surface.
- 5"HeavyDuty BenchVise(360°RotatingBase,Diamond-Shape Grooves)StrongClampingForce - This part are made of 45# steel with diamond-shape grooves which provide more clamping force in order to keep workpiece more stable during machining. 5" Heavy Duty Bench Vise ( Strong Clamping Force, Powder Coating Finishes, High Hardness, Durable) With 45#Steel Jaw & Cast Iron Body.
- Mini Milling Machine Bench Fixture Cross Slide X Y Table Worktable Drill Vise! - Milling Machine Worktable Mini Multifunction Drill Vise Fixture For Bench Drill Description： The table applies to mini bench drill and drill bracket series. It can also be applied to other suitable machine. The bench is made up of several adjustable dovetail aluminum alloy, We can guarantee a minimum of space and to ensure accuracy. Specifications: Material: Aluminium Alloy Size: 310 * 90mm * 80mm X-Route: 200mm Y-Route: 50mm Distance of grooves: 34mm T-slot size: standard size slot is 15X8X6mm Scale travel: 1.25mm (circle), 0.05mm (one cell) Packing List： 1 * Worktable.
- Heavy-duty Tilting Angle Flat-nose Pliers 6-incMilling Machin-use Tilting Vise - Jaw height: 50mm. Jaw width: 160mm. Positioning key width: 18mm. Maximum clamping force: 29KN. Maximum opening: 125mm.
- Multi-Purpose Rotating Bench Vise 6inch 360 Degree Heavy Duty - Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" Brand munirater MPN Does Not Apply Warranty 1 year Base Motion Type Swivel Jaw Width 6 in Jaw Opening Capacity 5-1/4 in Material Cast Iron UPC Does not apply Type Bench Vise Bundle Description No Modified Item No Modification Description No.
- Columbian Clamp On 3" Bench Vise - You are looking at a. Columbian Clamp On 3" Bench Vise.
- Milling Machine Compound Work Table X Y Axis Cross Slide Bench Drill Press Vise - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- 8 inch Bench Clamp Bench Vise with Swivel Locking Base for Milling Machine Vice - It is ideal for providing maximum clamping and holding power. New Heavy duty 8" bench vise. One Set8" Bench Vise with Swivel Locking Base. Jaw Width: 8". 360 degree Swivel Locking base ideal for turning in any direction as desire after mounting.
- 5 inch Tilting and Swiveling 0-90° Vise Milling Machine Vise with Base Bench - 1 set 5" Tilting and Swiveling Milling Vise(290022). When active mouth of the tongs level migration, above it half sphere can have a vertical downward pressure, therefore the clamp work piece cannot surface the boat.
- Vintage Panavise Bench Vise USA
- Vintage HOLLAND Vise with 4” Jaw
- Grizzly G7057 Bench Vise w/ Anvil - 3" - G7057 Bench Vise w/ Anvil - 3". This tough vise is ideal for all bench work applications. This vise is a bargain! Jaw size: 3".
- Yost Vises Model 205 Machinist Vise Heavy Duty With 360 Degree Swivel Base 5in - Conforms to Fed. Spec. GGG-V-410B Type VI Class 2Meets NSN 5120-00-221-111765,000 PSI Tensile Ductile Iron Body PartsInterlocking Swivel Base With 360 Degree Motion2 LockdownsNo Pinch Main Screw HandleReplaceable Hardened Steel Serrated JawsContinuous Rolled Thread on Main ScrewCancer and Reproductive Harm - https://www.p65warnings.ca.gov
- Ridgid 4'' Wide Bench Vise, 4000R Work Holding, Swivel
- 6 inch Multi-purpose Rotating Bench Vise Swival 360 Degree Heavy Duty - Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" Brand ALL-CARB MPN Does Not Apply Warranty 1 year Base Motion Type Swivel Jaw Width 6 in Jaw Opening Capacity 5-1/4 in Material Cast Iron UPC Does not apply Type Bench Vise Bundle Description No Modified Item No Modification Description No.
- 6" Heavy Duty Multi-purpose Rotating Bench Vise Swival 360 Degree - Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" Brand ALL-CARB MPN Does Not Apply Warranty 1 year Base Motion Type Swivel Jaw Width 6 in Jaw Opening Capacity 5-1/4 in Material Cast Iron UPC Does not apply Type Bench Vise Bundle Description No Modified Item No Modification Description No.
- Strong Hand 3-Axis Fixture Vise Quick Acting Screw Swing Away Arm Miter Joint - Minor surface corrosion visible.
- 5 inch Bench Vise Toolholding Workholding Clamp Bench Vice Screw - The vise surface is finished by power coating which makes the vice looks beautiful, it's durable and easy to clean dirt and oil. 1 x Vise(Bolts are not included). Material:Cast iron(body), 45# steel(jaw).
- 3/4/5 Inch Vise Precision Milling Drilling Machine Bench Clamping Lock Vise - Type: Bench Vise. Vise Height: 2.8" (70 mm). 1 x 3" Bench Clamp Vise. Vise Height: 3.9" (98 mm). 1 x 4" Bench Clamp Vise. Max Clamping force: 15 KN. Jaw height: 1.2" (30 mm). Jaw width: 3" (80 mm).
- Lot Of 4 Heavy Duty Cast Iron Vise Irwin Bessey Wilton Palgren Dyton - We do not buy direct from the manufacturers or from authorized dealers. The serial numbers in the pictures are covered to prevent mischief by hackers or others that want to cause harm. The item is sold as is.
- RARE Vintage J. Nason & Co. Combo Pipe & Bench Vise With Swivel Base - Combo Pipe & Bench Vise With Swivel Base. Jaws open freely.
- 6'' Bench Vice 150MM Cast Iron Body with Steel Casting nut - Made by cast iron Body with steel casting Nut. Rotating Angle: Left/Right. Jaws are Knurled and made from Carbon Steel.
- Snap-on Wilton 1750 Machinist Bench Vise Swivel Base Anvil Pipe Grips 5” Jaws - Minor battle scars to the replaceable jaw inserts. Nice clean unit dated 4/85. No cracks or repairs found.
- ( Lot Of 2 ) Bench Vise Screws for Workbench Vise, Excellent - ( Lot Of 2 ) Bench Vise Screws for Workbench Vise, Excellent. Fast shipping
- Large Wood Vise Screw, 18 Inches Long Woodworking Bench Vise - The screw is little under 1". length of the threaded part is about 15". I take photos of theexact item that you willget, unless I state otherwise.
- 6" Multi-purpose Rotating Bench Vise Swival 360 Degree Heavy Duty - Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" Brand ALL-CARB MPN Does Not Apply Warranty 1 year Base Motion Type Swivel Jaw Width 6 in Jaw Opening Capacity 5-1/4 in Material Cast Iron UPC Does not apply Type Bench Vise Bundle Description No Modified Item No Modification Description No.
- 6" Multi-purpose Rotating Bench Vise Swival 360 Degree Heavy Duty - Description: 6" Multi-purpose Rotating Bench Vise Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. Width: 6" Open: 5-1/4" Throat Depth: 3-1/2" Pipe jaws max. Open : 6-1/4" "V" Jaws Max. Open: 4" Anvil size: 3x4" UPC Does not apply Brand Thomletha Base Motion Type Swivel Jaw Width 6 in Jaw Opening Capacity 5-1/4 in Material Cast Iron MPN GM602920.
- 2.5" x 3-3/8" Vise High Precision .0002" Hardened and Ground - Product features Jaw width: 2-1/2" Jaw opening: 3-3/8" Jaw depth: 1-1/4" Vise length: 7-1/4" V-groove allows for holding of square and round parts, vertically and horizontally Square and parallel within .0002" (tolerance on handbook is metric) One-piece body construction Hardened and ground Rc 58-62 Precision ground on the front end, rear end, both sides, top and bottom All internal areas precision ground to insure constant accuracy Brand marddpair MPN AMZ427807 UPC Does not apply Base Motion Type Stationary Jaw Width 2-1/2 in.
- Multifunctional Mini Compound Bench Cross Working Table For Drilling Milling New - Mini multifunctional working table BG6300. The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machine. The working table with three T shaped groove groove, standard size is 15X8X6mm.
- Vintage Grey Yuasa 6" Jaw No. 150 Solid Steel 12" Base Swivel Vise Made in Japan - 19" L x 9.5" H with a 13" W base and weighs 71.6 lbs. In very good condition. Actual Images of item are shown above.
- Heavy Duty 4.5" Jaws Solid Steel 10" Base 360* Swivel Bench Pipe Vise USA Made - In very good condition. The vise is missing its pipe jaws. The vise swivels 360 degrees. 20" W x 10" H with a 10" W base and weighs 64.12 lbs. Actual Images of item are shown above.
- HFS(R) Precision Toolmakers Vise 2-1/2" - Precision Toolmakers Vise 2-1/2". Vise Overall Size. 8.875" Including Handle (Closed vise). Clamping slots are provided and jaws are easily replaced. Ground "V" way. [SURFACE PROCESS]: All surfaces are hardened and precision ground.
- Chas Parker Bench Vise Model 574 X 4 inch jaw Machinist Shop Blacksmith Swivel - Overall a very decent original vise- I shown many pictures as a crucial part of understanding the condition.
- Work Table Cross Slide Bench Drill Press Vise X-Y 2 Axis Milling Machine Fixture - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Rock Island 577 Heavy Duty bench vise 6" jaw, 12.5" opening with stand - Need a truly professional and heavy duty vise?. Here it is, a hardly used Rockisland 577 vise in outstnading condition. This vise has no defects and works well. A fairly new stand is included however it wasn't initially intended for use with this particular vise as the mounting holes are not correct.
- Wilton Utility HD 8-Inch Heavy Duty Bench Vise w/ Pipe Clamp &Jaw Savers- Unused - It does have a few nicks in the finish. Sold as pictured. outside Continental USA.
- Yost 31C Vise,3-1/2",With Place For Pipe Jaws Made In Holland Michigan USA 644 - Yost 31C Vise,3-1/2" Opens up to 7" With Place For Pipe Jaws Made In Holland Michigan USA. Condition is "Used". Shipped with USPS Parcel Select Ground or most economical method. Thanks Dennis
- 3”/4” Precision Milling Machine Vise Tilting Guide Rod Angle Flat-nose Pliers - 3"/4" Precision Milling Machine Vise Tilting Guide Rod Angle Flat-nose Pliers Tilting Pliers Drilling Machine Bench Vise Clamp.
- Milling Vise w/swivel base (Inv. 44085) - Milling Vise w/swivel base. Great vise for heavy duty drill press. Not What You Were Looking For?. Portland, CT. Opening 4.75".
- Compound Swivel Vise 5 X 5 (Inv. 44084) - Not What You Were Looking For?.
- WORKPRO Bench Vise, 4-1/2" Vice for Workbench, Utility Combination Pipe Home ... - Very Stable Bench Vise - It is so easy to install on your bench, so simple in fact that any idiot could do it. It is perfect for small projects and is highly adept at securing tools for sharpening and such.
- Panavise Multi Angle Swivel Vise with Parts Tray Base - Nice!
- Bench Grinder Shields 46A24020-007 - APPROXIMATE WEIGHT: 1 LBS.
- Yost Vises Model 910-HV Workshop Vise High Visibility All Steel Yellow 10in - High Visibility Vises conform to OSHA Specification 1910.144 -- Safety Color Standards. The entire vise is constructed using structural cast steel. The bar covers the continuous rolled main screw. Each vise is equipped with replaceable hardened steel serrated jaws and built-in pipe jaws.
- Yost Vises Model 445 Bench Vise Utility Apprentice Series Swivel Base 4-1/2in - 30,000 PSI Cast Grey Iron with Steel U Channel Bar360° Swivel Base with (2) LockdownsReplaceable Hardened Steel Serrated (Top) JawsPermanent Serrated Pipe JawsLarge Pipe Jaw CapacityLarge Anvil Work SurfaceNo Pinch Main Screw HandleCancer and Reproductive Harm - https://www.p65warnings.ca.gov
- Yost Vises Model 455 Bench Vise Utility Apprentice Series Swivel Base 5-1/2in - 30,000 PSI Cast Grey Iron with Steel U Channel Bar360° Swivel Base with (2) LockdownsReplaceable Hardened Steel Serrated (Top) JawsPermanent Serrated Pipe JawsLarge Pipe Jaw CapacityLarge Anvil Work SurfaceNo Pinch Main Screw HandleCancer and Reproductive Harm - https://www.p65warnings.ca.gov
- Machinery Bench Vise - Machinery Bench Vise. See all pictures for the best description. Check out my other listings as well. Thank you for looking
- 6" Bench Vise Vice Shop Equipment Mechanics Tool Garage Workbench - Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" What's in the package?.
- Heavy Duty 6" Mechanic Bench Vise Table Top Clamp Press Locking Swivel Base - Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" What's in the package?.
- 6" Mechanic Bench Vise Table Top Clamp Press Locking Ultralight Swivel Base - Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" What's in the package?.
- Vintage Small Portable Vacu Vise by General 2.5" Wide Made in USA
- 5'' Bench Vice 125MM Heavy Duty Cast Iron Body with Steel Casting nut - Made by cast iron Body with steel casting Nut. Rotating Angle: Left/Right. Jaws are Knurled and made from Carbon Steel.
- 2.5" Flat Tongs Vice Milling Bench Drill Vise Fixture Worktable Aluminium Alloy - Material:Aluminium alloy. Style: Flat mouth. I am willing to make every purchasing a happy one. Max clamping Capacity:2.5".
- Colton 1885 mini vise clamp on bench - (One) 1885 Colton mini clamp on bench vise, 2” jaws. This item was altered many years ago. A block of steel was machined to accept the leadscrew. It works fine and may actually be stronger than the original.
- Vintage Reed Manufacturing Co. 103 ½ Vise 3½ Jaw
- 15" Length 3/4" Diameter Vise Screw Crank
- Bessey Tools Model BV-C030 3 Inch (75mm) Light Duty Clamp On Bench Table Vise - Bessey Tools Model BV-C030 3 Inch (75mm) Light Duty Clamp On Bench Table Vise.
- Vintage Blue 360 Swivel Type Bench 4" Vise Large Anvil Iron Light Duty Home Shop
- Yost Bench Vise - Yost Combination Bench Vise. Swivel base. 5 inch jaw width. Lightly used.
- ITM Steel Bench Vice Clamp Straight Jaw 100mm 125mm 150mm 200mm 4" 5" TM102-100 - The ITM fabricated steel bench vice, (straight jaw) has a precise sliding jaw. With an all-steel construction, these fixed base vices are built to withstand the shocks of hammering, chipping, and other tough applications. Each vice has an integrated anvil for shaping and beating, together with an extra heavy-duty sliding jaw and large-diameter screw. Forged tommy bar along with the steel main screw helps the ineffective transmission of pressure on the workpiece. Carbon steel jaws are hardened 50 ± 5 HRC to withstand tough use and are serrated for a non-slip grip. A safety stopper provided at the end of the slide prevents slides from fall during usage.
- Morgan Milwaukee 4" Bench Vise Model # 40A. Stationary Base. LOCAL PICKUP ONLY. - For sale is a Morgan Milwaukee 4" Bench Vise. Model # 40A. Stationary base style (non-swivel).
- Forward DT08125A 5-Inch Heavy Duty Bench Vise 360-Degree Swivel Base and Head - Click here to see description.
- Multifunction XY Axis Milling Machine Worktable Cross Slide Bench Vise Fixture - Milling Machine Worktable Mini Multifunction Drill Vise Fixture For Bench Drill Description The table applies to mini bench drill and drill bracket series. It can also be applied to other suitable machine. The bench is made up of several adjustable dovetail aluminum alloy, We can guarantee a minimum of space and to ensure accuracy. Specifications: Material: Aluminium Alloy Size: 310 * 90mm * 80mm X-Route: 200mm Y-Route: 50mm Distance of grooves: 34mm T-slot size: standard size slot is 15X8X6mm Scale travel: 1.25mm (circle), 0.05mm (one cell) Packing List 1 * Worktable.
- Bench Vice 100 mm Machining Clamp - 100mm Bench Machining Vice Secure bolt mounted jaws with 45 degree slots Cast iron construction with high tensile bolts used in assembly 100 mm Jaw range Includes six mounting slots to securely fasten the vise to base Package includes handle strength rod as pictured Specifications : Total footprint size end to end 290 x 160 x 60 mm Clamping range: 100mm Jaw width: 105mm Jaw height: 20 mm Handle diameter: 23 mm Material: Cast Iron Weight 3.250 kg Type:Machining Vice Quantity: 1 .
- Bench Vice 125 mm Machining Clamp - 125 mm Bench Machining Vice Secure bolt mounted jaws with 45 degree slots Cast iron construction with high tensile bolts used in assembly 125 mm Jaw range Includes six mounting slots to securely fasten the vise to base Package includes handle strength rod as pictured Specifications : Total footprint size end to end 320 x 180 x 70 mm Clamping range: 125 mm Jaw width: 120 mm Jaw height: 30 mm Handle diameter: 27 mm Material: Cast Iron Weight 5.3 kg Type:Machining Vice Quantity: 1 .
- Nice Vintage Wilton Shop King Chicago 14 5'' Jaw Swivel Anvil Vise Usa - 5" JAW SWIVEL ANVIL VISE. This is in as found good used condition. The jaws are about 1/8" from closing tight (see pictures). Looks to have been repainted by the previous owner.
- PANAVISE 396 Wide Opening Head PANAVISE - General work-holding secure power for larger, heavier objects. The 366 vise head is 11" (279.4 mm) in length and opens up to 6" (152.4 mm) with neoprene pads attached (6-1/4" (158.8 mm) with pads off).
- Vintage | PanaVise | Circuit Board Holder | Vacuum Base - The base features a smooth, lower-aligned rubber pad and lever combination which creates a vacuum that secures the unit to surfaces.
- Vintage Craftsman 4” Bench Vise 5216 - Vintage Craftsman Bench Vise 5216.Includes pipe vise fitting, swivel bench mount.
- WILTON 6 INCH MACHINIST BULLET VISE 101066 huge large heavy duty, c3? - Missing one of the pipe jaws see pictures. I am in Kingsburg California 93631, 20 miles south of Fresno right off of the 99 freeway.
- 3/4" Precision Milling Machine Bench Vise Tilting Pliers Drill Bench Vise Clamp - 3"/4" Precision Milling Machine Vise Tilting Guide Rod Angle Flat-nose Pliers Tilting Pliers Drilling Machine Bench Vise Clamp.
- 4 inch Bench Vise with Swivel Locking Base Table Top Clamp Heavy Duty Vice - 1 set 4" Milling Machine Vise With Base (290019). When active mouth of the tongs level migration, above it half sphere can have a vertical downward pressure, therefore the clamp work piece cannot surface the boat.
- Vintage Wilton Angle Tilt 4" Gunsmith Machinist Vise w/Plastic Jaws Missing base - Vintage Wilton Angle Tilt 4" Gunsmith Machinist Vise w/Plastic Jaws Missing original tilting base. This vise was part of a tilting design and someone bolted this metal base but it is very cool and it does works great.
- 4 inch Multipurpose Vise Bench Vise Heavy Duty Multi-Jaw Vise 360-Degree - Product Description?? Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face..
- 4" Multi-purpose Rotating Bench Vise New Multi Purpose Vise High-Quality - Product Description?? Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face..
- 4?? Multipurpose Vise Bench Vise Heavy Duty Multi-Jaw Vise 360-Degree - Product Description?? Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face..
- 4?? Multipurpose Vise Bench Vise 360-Degree Rotation Clamp on Vise - Multipurpose Vise 4“ Bench Vise 360-Degree Rotation Clamp on Vise with Swivel Base and Head Heavy Duty Multi-Jaw Vise key Features?? Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness Durable Material?? Built by ductile cast iron, the vise is more durable and hard when in use. Designed for long service time. Powerful Clamping Jaws These jaws adjust well to the workpieces to provide powerful clamping pressure while reducing marring for superior grip. Swivel Base.
- Bench Vise 4-1/2 Inch Vice for Workbench Utility Combination Pipe Home Vise - Bench Vise 4-1/2 Inch Vice for Workbench Utility Combination Pipe Home Vise.
- 4 inch Multipurpose Vise Bench Vise Heavy Duty Multi-Jaw Vise 360-Degree - Description: Multipurpose Vise 4“ Bench Vise 360-Degree Rotation Clamp on Vise with Swivel Base and Head Heavy Duty Multi-Jaw Vise Swivel Multipurpose Bench Vise A 4-inch rotating bench vise is the ideal industry heavy-duty vise that prevents water, dirt & rust. It features with swivel head and base and can be used for home craftsmen, in the workshop, and even can be outdoor used. If the vise can be normally operated, it will be lifetime using. Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness key Features Durable Material.
- VTG Reed 104 R Stationary Machinist Bench Vise 4" Jaws USA 44 lbs 7.5 oz - No Chinese garbage.
- Masterforce 3" low profile ratcheting Workshop Benchtop Vise - Masterforce 3" low profile ratcheting Workshop Benchtop Vise.
- Columbian bench vise 506, 6" wide jaws - The vise does open and close smooth and in good working condition.
- 0-90 degree tilt guide rod angle flat nose pliers tilt drill press bench vise 4# - 0-90 Degree Tilting Guide Rod Angle Flat Nose Pliers Tilt Guide Angle Pliers Tilt Drill Press Bench Vise Clamp.
- 125 mm Machining Bench Vice Clamp - Machining Accessories Slitting Saws Tool Kits and Sets Black Bark Cases Grab Kits Tool Holding and Clamping. Machining Accessories. Includes six mounting slots to securely fasten the vise to base. 125 mm Bench Machining Vice.
- 3.5"Precision Toolmakers Vise Milling Grinding Machine Clamp Vise CNC Vise QGG88 - Jaw hardness: HRC58-65. High precision can be maintained regardless of whether it is used horizontally or vertically.
- 3.1" Precision ToolmakersVise Milling Grinding Machine Clamp Vise CNC Vise QGG80 - Jaw hardness: HRC58-65. High precision can be maintained regardless of whether it is used horizontally or vertically.
- 3" Precision Toolmakers Vise Milling Grinding Machine Clamp Vise CNC Vise QGG73 - Jaw hardness: HRC58-65. High precision can be maintained regardless of whether it is used horizontally or vertically.
- 2.5" Precision Toolmaker Vise Milling Grinding Machine Clamp Vise CNC Vise QGG63 - Jaw hardness: HRC58-65. High precision can be maintained regardless of whether it is used horizontally or vertically.
- 2" Precision Toolmakers Vise Milling Grinding Machine Clamp Vise CNC Vise QGG50 - Jaw hardness: HRC58-65. High precision can be maintained regardless of whether it is used horizontally or vertically.
- 1.5" Precision Toolmaker Vise Milling Grinding Machine Clamp Vise CNC Vise QGG38 - Jaw hardness: HRC58-65. High precision can be maintained regardless of whether it is used horizontally or vertically.
- Vise Table Top Clamp 6" Mechanic Bench Press Heavy Duty Lock Swivel Base - Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" What's in the package?.
- 1.5-8inch Precision Toolmakers Vise Milling Grinding Machine Clamp Vise CNC Vise - Jaw hardness: HRC58-65. High precision can be maintained regardless of whether it is used horizontally or vertically.
- Milling Machine Cross Sliding Table Vise For Mini Drill and Drill Bracket series - 1 Worktable. The table is suitable for Mini Drill and drill bracket series. The X axis Y axis distance is 200mm, the stroke is 50mm. is equal to 0.05mm. The work table is composed of several adjustable dovetail slot.
- 4?? Multipurpose Vise Bench Vise 360-Degree Rotation Clamp on Vise - Multipurpose Vise 4“ Bench Vise 360-Degree Rotation Clamp on Vise with Swivel Base and Head Heavy Duty Multi-Jaw Vise key Features?? Heavy-duty Construction Sufficient Clamping Capacity 360 Degrees Rotation Precision & Hardness Durable Material?? Built by ductile cast iron, the vise is more durable and hard when in use. Designed for long service time. Powerful Clamping Jaws These jaws adjust well to the workpieces to provide powerful clamping pressure while reducing marring for superior grip. Swivel Base.
- 4" Multi-purpose Rotating Bench Vise New Multi Purpose Vise High-Quality - Product Description Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face..
- 4 inch Multipurpose Vise Bench Vise Heavy Duty Multi-Jaw Vise 360-Degree - Product Description?? Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face..
- 4" Multi-purpose Rotating Bench Vise New Multi Purpose Vise - Product Description?? Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face..
- 4 inch Multipurpose Vise Bench Vise Heavy Duty Multi-Jaw Vise 360-Degree - Product Description?? Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face..
- SEARS 3 inch vise 1057-5174 Taiwan RED nice - Nice little portable tabletop/bench edge vise. One tiny mark in the jaws.
- Findmall 4“ Multipurpose Vise Bench Vise Heavy Duty Multi-Jaw Vise 360-Degree - Specification： Width: 4" Open: 3-1/2" Throat Depth: 2-1/2 Pipe jaws max. Open : 2" "V" Jaws Max. Open: 3-1/2" Anvil size: 2-3/8x3-1/8 Description： Parallel Jaws. Head swival 360 degree. Full 360 degree rotational jaws. Unique "V" jaws provide 4 point holding power. These Multi-Purpose Bench Vises do it all. Jaws rotate 360-Degree for unlimited work piece positioning and holds flat stock as well as round stock with the built-in pipe jaws. Base swivels for greater versatility and to top it all off there's even an anvil face. Package Including：.
- Pana Multi-Angle Vise Products 89511 With Model 308 Base Made In USA
- Vise Table Top Clamp 6" Mechanic Bench Press Heavy Duty Lock Swivel Base - Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" What's in the package?.
- Bench Mini Compound Bench Drilling Slide Table Worktable Milling Working Cross - This mini multi-functional working table is essential tool for mini bench drill, electric drill stand, milling machine and drilling machine. Very useful tool for electric drill, mini bench drill, milling machine and drilling machine.
- Machinist Vise (Inv.43332) - Jaw width 2-7/8". (Inv.43332).
- Wilton 4” Vise Main Body. Model 111017 - Wilton 4” Vise Main Body. Model 111017. It’s a good used vise main body and anvil that’s in great shape. No cracks and the anvil is in good shape
- Vintage Wilton 9450 Bench Vise 4.5” Jaws ~ Free Local Pick Up - The vise works as intended and is in ready to use or refurbish condition.
- 38-647 6in One-Hand Operation Quick Release Bench Vise - Vise presents a safety Hazard. In adequate operation can result in major injury. Always use a shield or protection. Always wear eye protection. Avoid damp or wet location. Clean vise with a Rag after each use.
- 4" Swivel Cross Slide Vise Drill Press Vise Bench X Y Clamp Milling HD 4 inch - Jaw Width 4". Type Cross Slide Base Type Swivel 360 Deg. arsenic and chromium from chemically treated lumber. WARNING: Many food and beverage cans have linings containing bisphenol A (BPA), a chemical known to the State of California to cause harm to the female reproductive system.
- HFS(R) 5" Milling Machine Lockdown Vise Swivel Without Base 5" - [WIDE APPLICATIONS]: It is an indispensable tool for fitters. There is no shaking when clamping the workpiece, and the machining accuracy is higher. [REINFORCED AND ADJUSTABLE]: The sturdy base and rotating handle are more stable and convenient to use, easy to operate, and enable us to improve work efficiency.
- Prentiss 518 bench vise 6" wide jaws - Besides these issues it opens and closes smooth.
- 6in Mechanic Bench Vise Table Top Clamp Press Locking Swivel Base Heavy Duty - Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" What's in the package?.
- Vise Table Top Clamp 6" Mechanic Bench Press Heavy Duty Lock Swivel Base - Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" What's in the package?.
- 6" Mechanic Bench Vise Table Top Clamp Press Locking Swivel Base Heavy Duty - Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" What's in the package?.
- 6" New Mechanic Bench Vise Table Top Clamp Press Locking Swivel Base Heavy Duty - Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" What's in the package?.
- Erie Tool Works Superior 43 1/2 Swivel Base Bench Vise 3.5" Jaw Made in USA Used - Up for sale is a used Erie Tool Works Superior 43 1/2 Swivel Base Bench Vise with 3.5" Jaw. Jaws line up as they should. No cracks or visible defects. Made in USA.
- Steelman 6-Inch Swivel Base Bench and Workshop Vise with Built-In Anvil 42462 - The 360-degree swiveling base makes it easy to find that perfect working angle for any size project. SWIVEL BASE - Full 360-degree swiveling base makes it easy to have the perfect working angle. CAST IRON - Powder-coated cast iron construction with machined steel jaws for lasting reliability.
- BASE ONLY - 6" Milling Vise Swivel Base, Cast Iron - NO VISE, BASE ONLY. Light Item. Sturdy Construction.
- Cast Iron Swivel Base for 6" Mlling Machine Vise - BASE ONLY - Precision Ground On The Bottom Of The Base. Unit Dim L x W x H (in) Unit Weight 12-3/8 x 11-1/8 x 1-3/8 Estimated .
- Cast Iron Swivel Base For 6'' Milling Vise Bridgeport CNC Milling Machine Vise - Swivel Base For 6" Milling Vise. Made From Ductile Cast Iron. Precision Ground On The Bottom Of The Base. Unit Weight: 17.50 Lbs Estimate Only . Product Detail.
- Yost No. 2D Machinist 5 Inch Vise - Yost No. 2D Machinist 5 Inch Vise. Looks to in good operable condition, with drill bit damage to the base (see picture), dirty, surface corrosion. Weight is over 19 pounds. If you have any questions please ask.
- Columbian Combination Pipe and Bench Vise 205 - Columbian Combination Pipe and Bench Vise model 205, in good working condition, no cracks or repairs, missing pipe jaws. A lot of dings all around and a hole on bottom base mount look at last picture, weights 94 lbs.
- NEW RIDGID 40755 Chain & Screw Replacement Part for BC4A Bench Chain Vise
- Panavise 315 5/16" Circuit Board Holder With None Base - Westward 32Zu63 Torpedo Level,Aluminum,Bubble,Anodized. Malco 18F Folding Tool, 18", Steel. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose.
- Bench Vise Swivel 3 inch Rotation Of 360 Degrees Universal Tool QUALITY MATERIAL - It is ideal for providing maximum clamping and holding power to keep the work piece steady. It features a rotation of 360 degrees and a tilt of 45 degrees, which is very convenient to turn in any direction after mounting.
- 15" Length 3/4" Diameter Vise Cranker (I Think)
- New Multicolored Multipurpose CAST Iron Baby VICE 40 MM Bench Type Heavy Duty - BABY VICE 40 MM BENCH TYPE.
- Craftright 100mm Bench Vice With Swivel - Craftright 100mm Bench vice. The vice features 100mm wide Carbon steel jaws for extra durability and 80mm width opening, ready for your next big project. Product 230mm 100mm 120mm. Swivel Base for easy maneuvering.
- Milling Machine Work Table Cross Slide X Y Axis Bench Drill Press Vise Fixture - The mini multi-functional working table is essential tool for mini bench drill, electric drill stand, milling machine and drilling machine. Very useful tool for electric drill, mini bench drill, milling machine and drilling machine.
- Compound Milling Machine Work Table Cross Slide Bench Drill Vise Fixture BG6300 - The mini multi-functional working table is essential tool for mini bench drill, electric drill stand, milling machine and drilling machine. Very useful tool for electric drill, mini bench drill, milling machine and drilling machine.
- Palmgren 6" Bench & Pipe Vise P746 (LOC1228D) - EDP: 9629746.
- Milling Machine Cross Slide X Y Axis Bench Fixture Work Table Drill Press Vise - Specification Material: Aluminium Alloy Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell) Package Included 1*Milling Machine Table Notes Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement. Please make sure you do not mind before you order.
- LV-6X 6'' Angle Fixed Machine Vise Heavy Duty Jaw Width 160mm Bench Vise - The Verticality between the fixed vise and the vise body is within 0.025MM/100MM. Width of jaw: 6.29" / 160mm Estimate Only . Vise body is gray iron casting with high durability. Vise opening: 8.81" / 224mm Estimate Only .
- LV-6X 6'' Angle Fixed Machine Vise Heavy Duty Vise Opening 224mm - 224mm (8.81") Estimate Only . The Verticality between the fixed vise and the vise body is within 0.025MM/100MM. Vise opening Vise body is gray iron casting with high durability. Width of jaw Height of jaw.
- Heavy Duty LV-6X 6'' Angle Fixed Machine Vise Precision Milling Accu Lock Clamp - The Verticality between the fixed vise and the vise body is within 0.025MM/100MM. LV-6X 6" Angle fixed machine vise. Vise body is gray iron casting with high durability. Vise opening: 224mm (8.81") Estimate Only .
- Rock Island 577 bench vise 6" jaws - Rock Island 577 bench vise 6" wide jaws, weights 157 lbs, swivel base, locking nut has a bolt installed on it. besides that it looks all original.
- Columbian 603 1/2 Machinist Bench Vise w/ M on Swivel Base 33 lbs 10.5 oz USA - Has nicks, paint, scratches, battle scars, hacksaw mark, and scrapes as would be expected from an antique used vise, (SEE PHOTOS). No cracks or repairs found. I'm guessing it's from the 40's.
- 4" Aluminum Vise Jaws with Magnetic, Rubber Pads Covers 1 Pair - The caps are made of aluminum alloy steel, durable to use and smooth surface.The pads are made of soft rubber, with rhombus anti-slip patterns, stable clamping and do not shake.There are embedded magnets, can be firmly attached to the jaws of the bench vise.Drawer design, easy to install and disassemble.The vise jaws can hold wood, metal, plastic, pipe and threaded objects to protect most flat, round or irregular products.Specification:Total Size: 101mm x 28.5mm x 25mm / 4" x 1.12" x 0.98" (L*W*H)Material: Aluminum Alloy Steel, RubberColor: Silver Tone, BlackPackage Content:1 Pair (2 Pcs) x Magnetic Vise Jaws.
- 6" Aluminum Vise Jaws with Magnetic, Rubber Pads Covers 1 Pair - The caps are made of aluminum alloy steel, durable to use and smooth surface.The pads are made of soft rubber, with rhombus anti-slip patterns, stable clamping and do not shake.There are embedded magnets, can be firmly attached to the jaws of the bench vise.Drawer design, easy to install and disassemble.The vise jaws can hold wood, metal, plastic, pipe and threaded objects to protect most flat, round or irregular products.Specification:Total Size: 152mm x 28.5mm x 25mm / 6" x 1.12" x 0.98" (L*W*H)Material: Aluminum Alloy Steel, RubberColor: Silver Tone, BlackPackage Content:1 Pair (2 Pcs) x Magnetic Vise Jaws.
- OEM 4" Jaw Width 4" Opening Cap 1-57/64" Throat Depth CastIron Swivel Bench Vise - Base Motion Type Swivel. Material Cast Iron.
- Vice Combination, Bernstein
- Multifunction Worktable Milling Machine,Cross Slide X Y Table Drill Vise Fixture - Mini Milling Machine X Y Cross Slide Table Bench Fixture Worktable Drill Vise ! This milling machine table is made of high-quality aluminum alloy, which is strong and durable. The Table Is Not Only Suitable for Miniature Table Drill and Drill Stand Series, but Also Other Suitable Machine Tools.
- 1PC ER32UM Wrench For Clamping Nut CNC Milling Lathe Precision Spanner - (Made of high quality tool steel material,high hardness, bending ability. Built in self-Release design and tools will never get stuck in holder. excluded.).
- Vintage Morgan Chicago Bench Swivel Vise Model 135 Working - Please note the end of the screw is inserted at an angle.l as shown in the 6th photo. Vice grip works great functionally Vintage Morgan Chicago Bench Swivel Vise Model 135.
- 153-2 Columbian Swivel Bench Vise, 3" Jaws Open To 3"
- Athol bench vise 626, 6" wide jaws - Athol bench vise 626, 6" wide jaws, swivel base, 6" wide serrated jaws, weights 177 lbs. It's missing both locking nut and bolts for swivel base. Heavy duty base. No repairs or cracks. forklift on site for local pick up or shipping to the lower 48 states/
- Heavy Duty 4-Inch Cast Iron Drill Press Vise - Especially used in the processing machinery industry, it can be used as a fixed type, it is an ideal accessory and household tool for various bench drills, milling machines, planers and other machine tools.
- Heavy Duty Cast Iron Drill Press Vise 4" - Jaw Width Crated of Cast Iron for long-lasting durability. 8-1/2 x 6-1/2 x 2-1/8. Unit Dim L x W x H (in) Lightweight and portable.
- Heavy Duty 4'' Drill Press Vise Table Bench Mini Drilling Vise - Slotted Base Position Easily On Drill Press Table Or Workbench. Heavy Duty 4" Drill Press Vise With Swivel. Jaw Width: 4". Durable Cast Iron Construction.
- Heavy-Duty 8 inch Milling Vise with Full 360 Degree Swivel Base - Used on milling machine for sharpening and drilling machine. The rotating base increases the flexibility in use.
- Full 360 Degree Heavy Duty 8'' Milling Vise Swivel Base - Used on milling machine for sharpening and drilling machine. Jaw Width Jaw Depth Jaw Opening Full 360 degree swivel base with accurate graduation. Unit Dim L x W x H (in) Unit Weight.
- Heavy Duty 8" Milling Vise Swivel Base 360 Degree Rotation - Heavy Duty 8" Milling Vise. Used on milling machine for sharpening and drilling machine. Jaw Depth: 2-3/8" Estimate Only . Jaw Width: 8". Jaw Opening : 6-1/2" Estimate Only . Full 360 degree swivel base with accurate graduation.
- Wilton bullet vise Model 350 - Wilton bullet machinists vise Model 350. Excellent condition. Weight 44 libs. Mfg Feb 1974.
- Wilton 865M Combination Vise,6-1/2" Jaw Width - If you need a vise that will hold your work piece steady, the Wilton 865M Combination Vise is an excellent choice. With its lighter weight material, it is easier to apply and provides greater strength than other vises.
- Wilton 745 5" Standard Duty Combination Vise With Swivel Base - Ironclad Performance Wear Iex-Hzi5-04-L Safety Glove. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
- Wilton 744 4" Standard Duty Combination Vise With Swivel Base - Yellow Jacket 69086 Vacuum Gauge. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
- Vise Vacuum Base Split Ball - Simple set up with strong suction pad base. Weight: 3.2575 lbs. Size: 5.0"L x 4.0"W x 6.3"H.
- Universal 360 Degree Table Clamp Vise - Universal 360 Degree Table Clamp Vise This handy vise can be taken and placed anywhere on your work bench. Dense rubber jaw pads and bench pad. 0 to 90 degree swivel position. Rotates 360°.
- #3 Cast Iron Bench Vise 3-point base with Dual Lock Swivel Enamel Finish NOS - #3 Cast Iron Bench Vise, 3 point Base with Double Locking Swivel. NOS, Made in Taiwan. Check Photos.
- NEW! Wilton 6" Utility Bench Vise 656HD - UTILITY BENCH VISE. Item Combination Vise. Item - Vises Combination Vise. 191 - 6" Jaw Width, 6" Jaw Opening, 4-3/16" Throat Depth". Jaw Width - Vises 6 1/4 in. Pipe Jaw Included Yes. Jaw Face - Vises Serrated.
- Vintage Columbian 5 inch Heavy Duty D45-M4 Combination Pipe and Bench Vise, Vice - This vise has a rich history in grandpa's garage.
- 2.5" Drill Press Milling Machine Bench Vise Workshop Tool - Brand TOOP MPN 161196-TOOP UPC Does not apply California Prop 65 Warning Passed Country/Region of Manufacture China Custom Bundle No Manufacturer Warranty 1 year Base No Color Blue Material Cast Iron Size 2-1/2 in Jaw Width 2-1/2 in Jaw Opening Capacity 2-1/2 in Length 17 cm Width 14.3 cm Height 4.6 cm Weight 1.25 kg Condition New.
- Swivel Base 4 Inch Bench Vise Milling Machine Fitter Tools - DESCRIPTIONS: ? Necessary Tools for Fitter: Most of the work of fitter depends on a vise to complete, such as sawing, filing, chiseling, assembling and disassembling parts. ? Smooth Guide Rail: The guide rail surface is finely ground, and the parallelism is 0.01m-0.1mm, very smooth and flat.The contact with the parts could be more precise, and the movement is smooth without jamming. ? Cast steel wrench: universal joint structure, high-strength steel makes the service life of the vise increase..
- Taytools Jaw Lining Leather for Moxon Vise Kit 19-5/8" x 5-15/16" LSSHEET50X15 - This is a piece of light brown French gold velours split leather sized 19-5/8" x 5-15/16" x minimum thickness between 1.6mm and 1.8mm. Finish is suede both sides and flexible and soft. These pieces are cut by hand and will have rare instances of the slight staining, small holes or slightly ragged edges.
- Vintage Wilton Shop King 4" Bench Vise Swivel Base - HAS A SWIVEL BASE MOVES FREELY IN AND OUT.
- Multifunction Worktable Milling Working Table Machine Compound Small Table Vise - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Vintage Red FULLER Bench Vise Anvil/Pipe Jaws/Swivel Base/3.5" Jaws - No cracks, or breaks. Swivel tightener has a slight bend in it. This item weighs 11-12 Lbs.
- Columbian Vice 4" Made in USA
- Castillo Casting Vice With Swivel Base 200 - IMPACT RESISTANT: Material made ofimpact-resistant Ductile iron (high tensile strength). Replaceable Nut madeof forged steel.
- Castillo Casting Vice With Swivel Base 150 - IMPACT RESISTANT: Material made ofimpact-resistant Ductile iron (high tensile strength). Replaceable Nut madeof forged steel.
- Castillo Casting Vice With Swivel Base 125 - IMPACT RESISTANT: Material made ofimpact-resistant Ductile iron (high tensile strength). Replaceable Nut madeof forged steel.
- Castillo Casting Vice With Swivel Base 100 - IMPACT RESISTANT: Material made ofimpact-resistant Ductile iron (high tensile strength). Replaceable Nut madeof forged steel.
- DIY 2-Axis Milling Compound Working Table Cross Sliding Bench Drill Vise Fixture - 1 Worktable. The X axis Y axis distance is 200mm, the stroke is 50mm. The table is suitable for Mini Drill and drill bracket series. The working table with three T shaped groove, standard size is. Working table size is 310x90mm and the height of 76mm, two.
- Moxon Vise 773901 3/4" Thread Rod 4-1/2" Knob 3/4" Nut Washer & Leather 944251 - They were first described and illustrated by Joseph Moxon in his 17th century book, The Art of Joinery. A dual-screw Moxon Vise is an incredibly versatile workbench accessory that is simple to build with the right hardware.
- Moxon Vise Kit 3/4"Thread Rod 4-1/2"Cast Knob&3/4" Nut& Washer 773895 X002HAM681 - They were first described and illustrated by Joseph Moxon in his 17th century book, The Art of Joinery. A dual-screw Moxon Vise is an incredibly versatile workbench accessory that is simple to build with the right hardware.
- Moxon Vise 3/4" Threaded Rod 4-1/2" Cast Handle 3/4" Nut Washer & Leather 944255 - They were first described and illustrated by Joseph Moxon in his 17th century book, The Art of Joinery. A dual-screw Moxon Vise is an incredibly versatile workbench accessory that is simple to build with the right hardware.
- Moxon Vise Kit 3/4" Thread Rod 4-1/2" Cast Handle & 3/4" Nut & Washer X002HAM67H - They were first described and illustrated by Joseph Moxon in his 17th century book, The Art of Joinery. A dual-screw Moxon Vise is an incredibly versatile workbench accessory that is simple to build with the right hardware.
- Vintage Machinists Drill Press Vise 4" Wide, Jaw Opening 3 1/4" Cast Iron
- Milwaukee Tool Co. Swivel Base Bench Vise w/ 3-1/2" Jaw Width, Anvil & Pipe Jaws - With 3-1/2" Jaw Width, Anvil & Pipe Jaws. Swivel Base Bench Vise. I am guessing that 3-1/4" is the maximum open work range. SGS-Pliers & Wrenches. SGS-Electrical Trade Tools. SGS-Drywall & Painting Tools.
- Forward DT08125A 5-Inch Heavy Duty Bench Vise 360-Degree Swivel Base and Head... - Forward - Since 1950 Forward has been building tools for almost 70 years. If you are looking for a bench vise, we've got you covered. Replaceable jaws with microgroove tooth space are made from high strength steel for superior grip.
- Ridgid 40195 BC410A 1/8" - 4" Top Screw Bench Chain Vise for Plastic Pipe - Model RIDG 40195. Ridgid 40195 Specifications Ridgid 40195 Features • Bench Chain Vises – Crank handle is anchored to base. • Two models available for plastic pipe. • Rugged cast-iron base has handy pipe rest and bender.
- RIDGID 40195 Model BC410 Top Screw Bench Chain Vise, Bench Vise for 1/8" to 4... - Master your jobs with ease and accuracy with the RIDGID Model BC410 Top Screw Bench Chain Vise (catalog number 40195, model BC410). Designed for plumbing experts, this bench vise makes it easy to hold 1/8" to 4" pipe and tubing securely in place for maximum performance on the job.
- Kurt 3600V 6" Manual Horizontal Stationary Precision VersatileLock Vise - Kurt Anglock vises are designed for precision clamping. The Pull-type action of the 3600V Versatile Lock design reduces jaw stationary deflection by at least 80%. This vise has a one-piece body and stationary jaw design which reduce weight and increases strength while providing .0005 clamping repeatability. It offers ultra-high precision through many important features. Ground sides allow side mounting. Accommodates upright and back to back mounting. Body through holes allow side by side mounting. Sine key or fixture key compatible.
- 4" Milling Lockdown Vise Bench Top Hardened Metal & Swiveling Without Base - 1 set 4" Milling Machine Vise (290027). When active mouth of the tongs level migration, above it half sphere can have a vertical downward pressure, therefore the clamp work piece cannot surface the boat.
- Japan Automatic Machine Co. Precision Vise (Inv.42442) - Japan Automatic Machine Co. Precision Vise (Inv.42442). jaw width 3-1/2". (Inv.42442). Not What You Were Looking For?. model wp120-1.
- Japan Automatic Machine Co. Precision Vise (Inv. 42441) - Japan Automatic Machine Co. Precision Vise (Inv. 2-1/4" jaw width. (Inv.42441). Not What You Were Looking For?. model np30-1. product #83b071. ).
- Japan Automatic Machine Co. Precision Vise (Inv.42440) - Japan Automatic Machine Co. Precision Vise (Inv.42440). (Inv.42440). Not What You Were Looking For?. model ws120. production number 82j00012.
- Japan Automatic Machine Co. Precision Vise (Inv.42439) - Japan Automatic Machine Co. Precision Vise (Inv.42439). machnists vise used. (Inv.42439). Not What You Were Looking For?. model no L-50. 6-1/4" length.
- Littlestown Bench Vise No. 400 (Inv.42450) - Vise is in good condition. jaw width is just shy of 5". (Inv.42450). model number 400. Not What You Were Looking For?.
- Vintage Cast Iron Unbranded 3.5" swivel base bench vice anvil weighs 10+lbs - Vintage Cast Iron Unbranded 3.5" swivel base bench vice anvil weighs 10+lbs. Condition is "Used". Shipped with Standard Shipping. SEE PICTURES!
- Lot of 4 - RIDGID 41110 Roll Pin for BC-810 or BC-610 Bench Vise - MPN: 41110. Certain products may require professional installation. What is pictured is what is for sale.
- Yost Vises shain souitlons Heavy-Duty Ductile Iron Woodworker's Vise bench vise - Yost Vises 7WW-DI 7" Heavy-Duty Ductile Iron Woodworker's Vise. Condition is "Used". Shipped with USPS Priority Mail.
- No.3 Machinists Vise 3" Jaw Opening Cast Iron
- Machinist vise gun maker's vise 1 5/8" jaws - As shown in pictures.
- Craftsman 391.5180 Bench Vise Swivel 3-1/2" Made in Japan Cleaned & Painted - Very nice Cleaned and Repainted Works as it should See pictures.
- 4 Inch Aluminum Soft Vise Jaws Fits Wilton Bench Vise 1740, Cadet and Others. - Note : We can build aluminum or brass jaws to fit your vise.
- 4" Swivel 360 Deg Drill Press Vise Bench X Y Clamp Cross Slide Milling HD 4 inch - Type Cross Slide Base Type Swivel 360 Deg. Jaw Width 4". arsenic and chromium from chemically treated lumber. WARNING: Many food and beverage cans have linings containing bisphenol A (BPA), a chemical known to the State of California to cause harm to the female reproductive system.
- Vintage Technical Devices Co. Circuit Board Vise - Circuit Board Vise. Condition is "Used". All parts function as they should. No other accessories are included. There are signs of wear form previous use. All photos are of the item that you will receive.
- Vintage PanaVise Circuit Board Vise W/ Metal Base 2898068 Model - Condition is "Used". All parts function as they should. There are no other accessories included. All photos are of the item that you will receive.
- WILTON Vise (Bullet), Patent Print Art Paper - High Quaility Print on thick matt textured art paper with the choice of a. Beautiful milling machine print. Gift ready.wrapped in cellophane and labeled.
- Columbian D-4 Heavy Duty 4" Jaw Vice Opening Jaw 4.34" Item N0 11120
- 6" Mechanic Bench Vice Table Top Clamp Press Locking Swivel Base Heavy Duty Vise - Specification： Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Feature: Color: Blue Material: Cast Iron Jaw Width: 6" Anvil size:3.23" x 3.35" Jaw Opening Capacity:6.3" Throat depth:2.6" Package Include: 1 x 6" Mechanic Bench Vise.
- Mini Compound Milling Machine Work Table XY 2 Handle Milling Operate Slide Table - Milling Machine Worktable Mini Multifunction Drill Vise Fixture for Bench Drill Description This is a multifunctional milling machine table with a wide range of adjustments, high precision, and high clamping force. This milling machine table is made of high-quality aluminum alloy, which is strong and durable. This milling machine table is designed with X-axis and Y-axis moving handwheels, so it can move forward and backward, left and right according to the work needs. Such a strong, durable, and easy-to-use milling machine table is a wise choice for you. Key Features High-quality Material: This milling machine table is made of high-quality aluminum alloy. The advantages of high strength and good steel of aluminum alloy make this milling machine table sturdy and durable. Double G.
- 3" Precision Mill Vise w/ Swivel Base Milling Drilling Machine Bench Clamp - 3"Precision Mill Vise. Max Jaw Opening: 2-7/8". Jaw Height: 7/8". Product Detail.
- 3'' Milling Lock Vise Precision Drilling Machine W/ Swivel Base Bench Clamp - Maximum Jaw Opening Jaw Width x Height Unit Dim L x W x H (in) 9 x 4-3/8 x 4 Estimated .
- 3 Inch Lock Precision Vise With Swivel Base Milling Drilling Machine Bench Clamp - Light Item.
- Chas Parker Bench Vise No 23x (Inv.42224) - Model number 23x. (Inv.42224). Not What You Were Looking For?.
- Chas Parker Bench Vise No 974B (Inv.42223) - Model number 974b. one jaw has been repaired, good repair. (Inv.42223). Not What You Were Looking For?.
- Chas Parker Vise No. 974 (Inv.42225) - Model number 974. (Inv.42225).
- Chas Parker Bench Vise No. 974 (Inv.42222) - (Inv.42222).
- Chas Parker Bench Vise No. 974 (Inv.42219) - (Inv.42219).
- Chas Parker Bench Vise 974 (Inv.42211) - (Inv.42211). Not What You Were Looking For?.
- Chas Parker Bench Vise 974 (Inv.42210) - (Inv.42210).
- Chas Parker Bench Vise 974 (Inv.42209) - (Inv.42209).
- Simplex Bench Vise 43 p (Inv.42199) - (Inv.42199).
- Chas Parker Bench Vise No 824-1/2 (Inv.42198) - (Inv.42198). model 824-1/2.
- Chas Parker Bench Vise No 975 (Inv.42197) - (Inv.42197).
- 4" Heavy Duty Cross Slide Vise With Metric Dial (3900-2704) - Cross travel and jaw width are 4". Jaw depth is 1-7/16". Jaw opening is 3.8". Longitudinal travel is 6". Ball crank handles are solid and balanced. High grade cast body. Heat treated steel jaws.
- 6" Large Cast Iron Hi-Duty No. 6 Bench Vise, 6" Jaws w/Swivel Base - Cast Iron Hi-Duty Bench Vise. WE'LL DO OUR VERY BEST TO MAKE IT SO! SPEC'S SUBJECT TO FINAL INSPECTION.
- Large Rock Island Bench Vise w/5.5" Wide Jaws - Rock Island Large Heavy Duty Steel Bench Vise. 6" Jaw Width. WE'LL DO OUR VERY BEST TO MAKE IT SO! SINCERELY. Stationary Base.
- Charles Parker 87 Vintage Vice Meriden CT - Vice operates smoothly.
- Vise With Stand - 46 LB VISE. GOOD WORK STATION SAVE SPACE. PROFESSIONALLY WELDED I BEAM STAND. 41 1/2" HIGH TO TOP OF JAWS WORKING HEIGHT.
- New Hd 6" Heavy Duty Bench Vise Clamp Tabletop Swivel Locking Steel Base - NEW Heavy duty 6" bench vise. Simply unlock the 2 quick release bars located on the base of each side swivel the vise to the direction as needed. Swivel Locking base ideal for turning in any direction as desire after mounting.
- DAYTON 4CPF8 4" Machine Vise with Swivel Base - Machine Vise, Rotary Jaw Milling, Swivel Base, Jaw Width (In.) 4 in, Jaw Opening (In.) 4 in, Throat Depth (In.) 1 7/16 in, Overall Length (In.) 13.62, Overall Height (In.) 4.6, Clamping Force (Lb.) -, Jaw Deflection 0.006 in Per 4 in At 33 lb Load On Hand Crank, Jaw Plate Square To 0.0012 in per 4 in, Bed/Base Parallel To 0.0012 in, 360 Degrees Swivel Base, Fixed Jaw Has Four Faces with Different Jaw Options and Can Be Easily Rotated and Set as Per Requirement, Hold Down Slot for Secure Clamping.
- 3 Inch Milling Vise Knee Mill Or Bench Mill Free Shipping! - This was a sample that was sent to us but never went into production. The box was opened but the vise was never used. Max Jaw Opening: 2-5/8". Jaw Height: 1". Part no: Line Item: OB-VISE-3"-001.
- 5" Inch Milling Vise Knee Mill Or Bench Mill Free Shipping! - This was a sample that was sent to us but never went into production. The box was opened but the vise was never used. Jaw Height: 1-11/16". Part no: Line Item: OB-VISE-5"-001.
- Ridgid 58717 Tool Holder Slider - Ridgid 58717 Tool Holder Slider. Retails for over $300. Condition is "New". Shipped with USPS Priority Mail.
- Industrial 6" Swivel Base Anvil Vise Machinist Mechanic Blacksmith Tool & Die - This sale is for a well preserved rotating base anvil vise. This goliath has a 6" wide grip and 7" depth opening. Presents with a nice gray finished paint which I believe to be a repaint. The handle turns both have slight bends.
- Vintage Wilton Vise 121079 4" Jaw Tilting Vise Swivel Base Bench Table Mount - Tilting vise. 4" wide jaw. In fair condition. Missing one screw in jaw. Paint is chipped and worn. Will be sold as is. Signs of wear from use and storage. Scuffs and scratches.
- 5" Milling Machine Vise with Base Bench Vise Toolholding - 5" Milling Machine Vise with Base. 1 set 5" Milling Machine Vise With Base (290017). When active mouth of the tongs level migration, above it half sphere can have a vertical downward pressure, therefore the clamp work piece cannot surface the boat.
- Wilton Vise 3-1/2" Jaw Width - 3-1/2" JAW WIDTH. 3-1/8" MAX JAW EXPANSION. Approximate weight: 10.8 lbs.
- Capri Tools 4" Ultimate Grip Forged Steel Bench Vise - Contains 4 inches wide jaws, 5 inches jaw opening, and 2.9 inches throat depth Made of 90,000 PSI tensile strength drop forged steel Exerts 5,500 LBS of clamping force and comes with replaceable machinist and pipe jaws Comes with 360 degree swivel base, large anvil, and corrosion resistant black oxide handle Includes a lifetime warranty Use this bench vise for all kinds of woodwork, metalwork, sawing, drilling, and gluing things together! Not your average bench vise, this beast is made of 90,000 PSI tensile strength (54,000 psi yield strength) drop forged steel, a large anvil, and corrosion resistant black oxide handle. The guiderails are adjustable to help increase precision and smoothness on the job.
- US 2 Axis Cross Sliding Milling Compound Mini Working Table Bench Drill Vise DIY - 1 Worktable. The X axis Y axis distance is 200mm, the stroke is 50mm. The table is suitable for Mini Drill and drill bracket series. The working table with three T shaped groove, standard size is. The work table is composed of several adjustable dovetail slot.
- Yost 3.1/2 Inch Heavy Duty Industrial Combo Pipe/ Bench Vise - It features a interlocking swivel base with 360 degree motion, pipe jaws are set back to allow for machinists vise use, replaceable hardened steel flat serrated jaws. Our part number on this one is 1-554-013.
- Yost 3.1/2 Inch Swivel Base Heavy Duty Machinist Bench Vise 203.5 - The vise has a interlocking swivel base with 360 degrees motion with 2 lock downs. Our part number on this one is 1-554-008.
- Tolsen Swivel Base Work Bench Table Vice Clamp 6inch 150mm with Anvil - Tolsen 10105 work bench vice 6" with swivel base and anvil. Tolsen 6” 150mm work bench vice with anvil. Swivel base with anvil. Jaws length: 6" or 150mm. Model: 10105. Computer Accessories. Powercoated to prevent from scratches and rust.
- Morgan Milwaukee 45a 145 Large Industrial 4.5"Bench Vise INV=29869 - For sale is a Morgan Milwaukee Large Industrial 4.5" Bench Vice. Local pickup isalways available.
- 6 In Cross Sliding Vise Heavy Duty Drill Press Milling Machine Cast Iron Metal - This 6 inch cross slide vise is an essential tool for fitters. Most work of the fitters is completed by using the clamping vise such as sawing, filing, chiseling and some of assembly and removal jobs. Specifications: .
- Bench Vise 6 Inch Cross Slide Heavy Duty Drill Press Milling Machine Cast Metal - Feature: 6" Cross Slide Vise Solid Casting High Precision 360° Swivel Hanle Powerful Clamping Force Specifications: .
- 4 In Bench Vise Machine Mechanic with 360 Swivel Table Top Clamp Locking Base - 4" Bench Vise This 4 inch bench vise is an essential tool for fitters. Most work of the fitters is completed by using the clamping vise such as sawing, filing, chiseling and some of assembly and removal jobs. Feature: 4" Bench Vise Solid Casting High Precision 360° Swivel Base Powerful Clamping Force Specifications: .
- Wilton 28820 676U 6-1/2" Utility Bench Vices - 28820 Wilton 676U 6-1/2" Utility Bench Vices. Mile-X has a large selection of Wilton bench vises online. The Wilton Utility line is economically prices and for light duty use. If you do not see the model listed, give us a call for pricing.
- Wilton Tradesman 6-1/2 Round Channel Vise With Swivel Base - The Tradesman round channel vise is designed to handle the most demanding clamping applications. Unlike most vises that have a fixed center nut the Tradesman round channel vise nut is anchored at the rear which provides straight line pull and even pressure resulting in greater durability.
- 6 in Bench Vise w/ Anvil Swivel Base Heavy Duty Multipurpose Vise - Specification： Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" What's in the package 1 x 6" Mechanic Bench Vise Brand greatparts MPN Does Not Apply Type Bench Vice UPC Does not apply.
- 6 Inch Bench Vise Vice Shop Equipment Mechanics Tool Garage Workbench - Specification： Heavy duty industrial quality 6" table vise Serrate steel jaws 3 Down Slots 360° double locking swivel base Provides excellent clamping and holding power Swivel base allow you to get the correct angle on your work piece Precision crafted and designed to provide dependable service and sanctification Great item for both home and industrial uses Product Specs Color: Blue Material: Cast Iron Jaw Width: 6" What's in the package 1 x 6" Mechanic Bench Vise Brand happy19star MPN Does Not Apply Type Bench Vice UPC Does not apply Size 6 in.
- Bench Vise - 2" Bench Vise.
- Heavy Duty 5'' Milling Vise With 360-Degree Rotation Swivel Base - Jaw Opening: 5". Jaw Width: 6-1/2". Jaw Height: 1-3/4". Swivel Base With Accurate Graduation. Throat Depth: 2-1/8".
- 5'' Heavy Duty Milling Vise With Swivel Base 360-Degree Rotation - Jaw Opening Jaw Width Jaw Height Swivel Base With Accurate Graduation. Throat Depth Unit Dim L x W x H (in) Unit Weight Between Studs.
- Heavy Duty 5'' Milling Vise With Swivel Base 360 Degree Rotation - Heavy Duty 5" Machine Milling Vise With Swivel Base. Jaw Opening: 5". Jaw Width: 6-1/2". Jaw Height: 1-3/4". Swivel Base With Accurate Graduation. Throat Depth: 2-1/8". Product Detail.
- Forward T4500 5.5-Inch Heavy Duty Reversible Bench Vise With 360-Degree Swivel B - Our passion is making clamping tools that last a. If you are looking for a bench vise, we've got you covered. Reversible function: The front jaw can be removed, then being reversed and inserting to the end of the back jaw to provide a longer jaw opening.
- Hermann Schmidt - 3” - Precision Machinist/Grinding Metal Vise - NU57
- Brink & Cotton 2" Jaws Table Clamp Bench Top Swiveling Vise 153 less modif. 2.5 - Brink & Cotton (2-1/2" less modification). Jaws Table Clamp Bench Top Vise # 153. 2 plates were added that make it with more grip range.
- Compound Milling Machine Work Table 2 Axis Cross Slide Bench Drill Vise Fixture - 6.7 in / 170 mm Milling Machine Worktable. The drill press table will be more convenient to adjust the tightness of the worktable with a number of bolts and nuts. Worktable length: 17.7 in / 450 mm. Worktable width: 6.7 in / 170 mm.
- Durable 3 Inch Clamp-On Metal Vise, Attaches to Any Table up to 1.8 Inches Thick - This clamp-on bench vice features jaws that open approximately 3 inches wide and clamps to any tabletop that is 1.8 inches or less. The vice keeps your workpieces perfectly still for tasks such as sawing, grinding, drilling, sanding, and polishing. It has smooth jaws that are designed specifically for wood, plastic and light metalworking. It has a durable metal construction and powder coated protective finish. It's convenient portable size makes it easy to quickly remove and attach as needed.
- Titan 22013 5" Bench Vise - Hardened steel jaw. Item(s) that has been opened or used.
- Ridgid C-340 Top Arch of Vise
- Milling Machine Compound Working Table Cross Slide Bench Drill Drilling Vise - Clip Applier. 1 Worktable. Needle Holder. LAUNCH product. The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machines. dental head lamp. A lattice is equal to 0.05mm.
- 4" Jaw Width, 3-17/32" Opening Capacity, 2-1/4" Throat Depth, Cast Iron Swive... - Value Collection 4" Jaw Width, 3-17/32" Opening Capacity, 2-1/4" Throat Depth, Cast Iron Swivel Bench Vise Bolt Down Base Attachment, 5.77" High
- Value Collection 5" Jaw Width, 4-1/2" Opening Capacity, 2-5/8" Throat Depth, ... - Value Collection 5" Jaw Width, 4-1/2" Opening Capacity, 2-5/8" Throat Depth, Cast Iron Swivel Bench Vise Bolt Down Base Attachment, 6.81" High
- Cast Iron Swivel Bench Vise: 6" Jaw Width, 4-15/16" Opening, 3" Throat Depth - Value Collection 6" Jaw Width, 4-15/16" Opening Capacity, 3" Throat Depth, Cast Iron Swivel Bench Vise Bolt Down Base Attachment, 7.72" High
- Ridgid 1/8 to 4" Pipe Capacity, Manual Chain Vise Bolt Down, Cast Iron, Model... - Ridgid 1/8 to 4" Pipe Capacity, Manual Chain Vise Bolt Down, Cast Iron, Model Number BC410
- Milling Compound Worktable Cross Sliding Bench Drill Vise Fixture DIY Safe Use - 1 Worktable. Scale is in front of the movable positioning. The table is suitable for Mini Drill and drill bracket series. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
- Pin vise Large 0-3mm #TS302
- Gem Vise No 4 Machinist Vise (Inv.40336) - (Inv.40336). max opening about 6-1/2".
- Dynamic Movable Jaw Yost no 46 Swivel Base Vise 5" Jaws Rear Swivel Jaw - Good used part with weld splatter and normal wear etc. make Supersized seem small.
- Yost Bench Vise Serrated Pipe Jaws Cast Metal 6-1/2 in. Width 2-Piece Locks - The Yost Apprentice Bench Vise is designed to fit the needs of general clamping needs. Hand Tool Type: Vise. Permanent serrated pipe jaws. Vise Type: Bench. Jaw width: 6-1/2 in. Jaw opening: 5-1/2 in.
- New In Box! Wilton 745 5'' Mechanics Bench Vise - NEW IN BOX! Jaw Width (In.). Model no. 745. Pipe Jaw Capacity (In.). 1/4 - 2-1/2. Opening Capacity Max (In.). Throat Depth (In.). Replaceable hardened steel top and pipe jaws.
- Interstate Cast Iron Swivel Bench Vise 6" Jaw Width 09207861 DAMAGED - Model: 09207861. Base Motion Type Swivel. Material Cast Iron. One portion of bolt down base is broken off as shown .
- Bench Vise Bench Clamp 3V-1A Clamp Vise Table Vise Machinist Vise - Vise is in used condition as seen in the pictures. Lightly cleaned and no owner's marks.
- HFS(R) 4" Compound Cross Slide Industrial Strength Benchtop & Drill Press Vise - [Wide Jaws Opening]: The width of jaw is 4"(100mm), Height of jaw is 1.81"(46mm). Net Weight:19.8lbs (9kg). [Industrial Cast Iron]: Constructed of industrial-strength powder-coated cast iron;. [Universal Design]: Universal design compatible with the majority of drill presses on the market;.
- 2 Axis Cross Sliding Milling Compound Mini Working Table Bench Drill Vise DIY - Patient Monitors. Color ultrasound Scanners. People Use. Ultrasound Scanners. ECG analysis. ECG Printing Paper. ECG Monitoring Accessories. EKG ECG Machines.
- A Wilton No.4 Machinists Vise 4" Wide Jaw Opens To 4" Weighs 7 1/2 Pounds - A Wilton no.4 Machinists Vise, 4" wide jaws, opens up to 4", weighs 7.5 lbs. This vise is in very good condition but it has been used and it is greasy and it could use a good wipe down. It opens and closes easily, no rust or tarnish, a little wear on the jaws.
- Bench Vise Model#71 - FOR YOUR CONSIDERATION. THERE IS A NUMBER 71 ON THE BOTTOM RIGHT HAND SIDE OF THE VISE. YOU CAN SEE IT IN THE PICTURE. THE PAINT IS PEELING OFF. DESPITE THAT, THIS VISE IS STILL IN DECENT SHAPE.
- rock island bench vise 572
- HFS(R) 3" Compound Cross Slide Industrial Strength Benchtop & Drill Press Vise - [Wide Jaws Opening]: The width of jaw is 3"(75mm), Height of jaw is 1.38"(35mm). Net Weight :15.8lbs (7.2kg). [Industrial Cast Iron]: Constructed of industrial-strength powder-coated cast iron;. [Universal Design]: Universal design compatible with the majority of drill presses on the market;.
- 66-908-5 Cradle Style Angle Vise - Cradle Style Angle Vise. One V-groove and one plain jaw plates. Jaw Opening: 4.25". Jaw Width: 4.5". Jaw Depth: 1.5". Two bolt lugs on the base for settling on machine table. Weight: 14 lbs.
- 76-693-1 Workshop Bench Vise 5" - Jaw Width: 5". Jaw Opening: 5". Weight: 31 lbs. Maximum Pipe Capacity: 2 3/8". Minimum Pipe Capacity: 5/8". Throat Depth: 3". Replaceable steel top jaws.
- 76-694-9 Workshop Bench Vise 6" - Jaw Width: 6". Jaw Opening: 6". Weight: 42 lbs. Maximum Pipe Capacity: 2.5". Minimum Pipe Capacity: 5/8". Throat Depth: 3.5". Replaceable steel top jaws.
- 76-682-4 Workshop Bench Vise 4" - Removable hardened steel jaw faces. Jaw Width: 4". Jaw Opening: 3.5". Throat Depth: 2.3".
- 76-692-3 Workshop Bench Vise 4" - Jaw Width: 4". Jaw Opening: 4". Weight: 22 lbs. Maximum Pipe Capacity: 2". Minimum Pipe Capacity: 5/8". Throat Depth: 2.75". Replaceable steel top jaws.
- 76-683-2 Workshop Bench Vise 5" - Removable hardened steel jaw faces. Jaw Width: 5". Jaw Opening: 4". Throat Depth: 2.7".
- 76-695-6 Workshop Bench Vise 8" - Jaw Width: 8". Jaw Opening: 8". Weight: 70 lbs. Maximum Pipe Capacity: 3". Minimum Pipe Capacity: 5/8". Throat Depth: 4". Replaceable steel top jaws.
- 76-684-0 Workshop Bench Vise 6" - Removable hardened steel jaw faces. Jaw Width: 6". Jaw Opening: 5". Throat Depth: 3".
- Hollands Erie PA USA #52 Bench Vise jaws 3 1/2"x 6 1/4" - Hollands Erie PA USA #52 bench vise 3 1/2"x 6 1/4" in good condition.
- 4 inch Cast Steel Multi-Purpose Vise and Jaw - Jaw (Replaceable): 5" (360¡ Rotation w/Lock). Pipe Jaw Capacity: 1-3/4". Material: Cast Steel. Anvil: 2-1/2" x 1-7/8".
- 4" Multi Purpose HD Cast Steel Vise Anvil Pipe 360 Degrees Swivel Base & Jaw - Multi-Purpose VISE. Vise capacity Pipe jaw capacity Jaw (Replaceable) Heavy Duty Cast Steel. 360 º Rotation w/Lock. 2-1/2 " x 1-7/8".
- 4" MULTI PURPOSE VISE ANVIL PIPE 360 Degree Swivel Base & Jaw - Multi-Purpose VISE. Vise Capacity : 4 ". Anvil: 2-1/2 " x 1-7/8". Pipe Jaw Capacity: 1 -3/4". Jaw (Replaceable) : 5 " (360¡ Rotation w/Lock). Base: 360¡ Rotation w/Lock.
- 5 inch Multi Purpose VISE ANVIL PIPE 360 degree Scale Ruler Swivel Base Jaw - Base: 360 Degree Rotation with Lock.
- 5" MULTI PURPOSE VISE ANVIL PIPE 360º Scale Ruler Swivel Base & Jaw - Multi-Purpose VISE. Vise Capacity Pipe Jaw Capacity Jaw (Replaceable) 360 º Rotation w/Lock. Heavy Duty Cast Steel. 3-1/8 " x 2.5".
- 5" MULTI PURPOSE VISE ANVIL PIPE 360 degree Scale Ruler Swivel Base & Jaw - Multi-Purpose VISE. Vise Capacity : 5 ". Anvil: 3-1/8 " x 2.5". Pipe Jaw Capacity: 2-1/2". Jaw (Replaceable) : 5 " (360¡ Rotation w/Lock). Base: 360 ¡ Rotation w/Lock.
- Gibraltar Combination Pipe / Bench Vise w/ Swivel Base 8" Jaw Width - On of the lockdown toes is broken off the base (see pictures) however, the vise is in otherwise good condition. The jaw opens & closes without issue and the base swivels without issue. Combination Pipe / Bench Vise.
- Aluminium alloy Cross Slide Vise Work table Bench Milling Drill fixture FDA - 1 Worktable. Scale is in front of the movable positioning. Material: Aluminium Alloy. The table is suitable for Mini Drill and drill bracket series. Scale travel: 1.25mm (circle), 0.05mm (one cell).
- 3" Columbian 33153 153 Clamp-On Swivel Base Bench Vise, Cast Iron. USED lot#2 - View all photos. Inventory #.
- Alloy Aluminium Universal Adjustable DIY Table Vise Clamp Tool Jaw Opening 46mm - 1x Vise Clamp. Maximum jaw opening: approx 46 mm. Maximum Clamp Width: approx 31 mm. Material: Alloy Aluminum. Weight: 411g. 100% new Light and convenient. It can be widely used. Great for jewelry, electronics repair, soldering.
- 5" Vise Anvil Bench Table Top - 5" Vise w/Anvil. Vise Capacity Jaw (Replaceable) Heavy Duty Cast Steel. 4 " x 4-1/8".
- 5" VISE ANVIL Work Bench Table Top Clamp w/ 120 Swivel Base - 5" Vise w/Anvil. Vise Capacity: 5". Anvil: 4" x 4-1/8". Jaw (Replaceable): 5" x 3/4" x 1/2". Base: 120 Rotation w/Lock. Heavy Duty Cast Steel.
- 4" ANG-LOCK Milling Machine Precision Vise w/ Swivel Base Drilling Bench Clamp - 4" Accu Lock Precision Mill Vise w/ Swivel Base. Max Jaw Opening: 4-3/4". Jaw Height: 1-1/4".
- Bead Roller Rotary Machine Clamp Bench Vise Steel Sheet Metal Rolling 6 Dies Set - Clamp-on offset base. Distance Between Shaft Center Unit Dim L x W x H (in) 18 Gauge Mild Steel. Quantity: 1.
- Bead Roller Rotary 6 Dies Set Machine Clamp Bench Vise Steel Sheet Metal Rolling - Clamp-On Offset Base. 13/16" (20 mm) Distance Between Shaft Center. Thickness: 18 Gauge Mild Steel.
- High Precision 2" Jaw Wire Cut EDM Vise HRC 55 .0002" Toolmaker Stainless Steel - Vise Length Jaw opening Precision Ground And Hardened Throughout. 1.10" W X 0.97" Depth. Made of Stainless Steel To Resist Erosion. One Piece Body Construction. Supplied In Case. Parellelism And Squareness Within 0.0002".
- COLUMBIAN CLAMO-ON 3" Bench Vise
- New - 5" Bench Vise With Swivel Base - Give us a call to check inventory for used tool availability, or if you'd like us to fabricate or manufacture a custom tool for you.
- Stainless Steel High Precision 6" Wire Cut Bench Vise - Vise length Jaw opening Precision ground and hardened throughout. Made of stainless steel to resist erosion. 1.26" W X 1.38" Depth. One piece body construction.
- Heavy Duty 4" Jaw Welding Welder Angle Corner Swivel Vise Clamp - Length Jaw Plate Maximum Opening Jaw It Can be Used on Clamping of Work Pieces, Functioning Also As a Vice. Unit Weight.
- Gibraltar Combination Bench Vise w/ Swivel Base & Pipe Jaws 6" Jaw Width - Bench Vise. Jaw Width - 6”. The jaw travels smoothly and the base swivels without issue. Base Type - Swivel. Pipe Capacity - 3-1/2”. Opening Capacity - 5-3/4”. Venice, FL, 34285. 155 Center Ct.
- 3 inch Sine Vise 4-3/8 inch Vise Capacity Toolmaker Tool making Clamp Vise - Sine Range: 0 - 60 degree.
- 3'' Jaw Toolmaker Sine Vise Grinding Ground Steel Clamping Milling Bench Vise - 3" Sine vise. Vise Width Vise Capacity Vise Length Vise Height Jaw Height Square andParallel within. 0002". 0 - 60 degree.
- 4" High Precision Stainless Steel Wire Cut Vise Hardened Milling .0002 Mill - 4" High Precision Stainless Steel Wire Cut Vise. Vise Length: 6.7". Jaw Opening: 4". Jaw Depth: 1.18". Jaw Width: 1.24". Precision Ground And Hardened Throughout. Made Of Stainless Steel To Resist Erosion.
- 6 x 6-1/2 inch Precision Milling Lock Down Vise with Swivel Base
- 6" Milling Machine Lockdown Vise -Swiveling Base - Hardened Metal - CNC Vise - 6" Precision Milling Machine Vise w/ Swivel Base. Max jaw opening Jaw height Accurate to. 002" on parallelism and Squareness.
- 6'' Accu Lock Precision Vise w/ Swivel Base Milling Drilling Machine Bench Clamp - 6" Accu lock precision mill vise w/ swivel base. Jaw height: 1-7/8".
- Milling Machine Compound Work Table Cross Slide Bench Drill Press Vise Fixture - Dental Light. Scale travel: 1.25mm (circle), 0.05mm (one cell). new Push Button Contra Angle. Inner water straight angle. classic straight Angle. new straight Angle. Dental root canal treat & test. Inner water push contra angle.
- Labwork 6" Bench Vise w/ Anvil 360° Swivel Locking Base Heavy Duty Ductile Iron - Description: -Heavy duty industrial quality 6" table vise -Serrate steel jaws -3 Down Slots -360° double locking swivel base -Provides excellent clamping and holding power -Swivel base allow you to get the correct angle on your work piece -Precision crafted and designed to provide dependable service and sanctification -Great item for both home and industrial uses -Color: Blue -Material: Cast Iron -Jaw Width: 6" -Anvil size:3.23" x 3.35" -Jaw Opening Capacity:6.3" -Throat depth:2.6" Package Include： 1*6" Mechanic Bench Vise W/o Product Instruction .
- 6'' Precision Milling Machine lock Down Vise Accu Lock Vise Clamp Clamping Vise - 6" Accu lock precision mill vise. Jaw height: 1-7/8". Item#: 1360.
- Milling Drilling Machine Bench Clamp Clamping Vice 6'' Accu Lock Vise Precision - Jaw Opening Jaw Height Quantity: 1.
- 6 inch Accu Lock Precision Mill Vise Accurate to .002 On Parallelism Squareness
- Craftsman operators manual for Standard Vise Model Nos. 351.240710, 730,750,770 - Original Operators manual covers the following model numbers.
- HFS(R) 1" Precision Grinding Screwless Mini Insert Vise Toolmaker Steel .0002" - Tool making precision grinding vise. Vise is ground flat. Jaws can be opened and closed without unbolting vise from work surface. Jaw width: 1", jaw opening: 0.8", jaw depth: 0.8", weight: 1.1lbs. Angular center channel provides extra jaw capacity.
- Clamp 3.5 In Jaw Opening 6 In CNC Double Vise Milling Lock Down Hardened .0004 - Clamping Force: 16,000 lbs.
- 6" Double Lock Down Cnc Precision Milling Vise - Jaw width Jaw opening Jaw depth Precision Ground On All Sides. Clamping force Single Swivel Handle Operates Both Clamping Stations Simultaneously. Bed height 25" estimate only .
- Vintage Littlestown No. 112 Swivel Bench Vise 3.5” Wide Jaws Anvil Cast Iron USA
- 13" Machinist Swivel Vise for Milling Machine
- Premier Bench Vise Wilton New Decal !!! - This is a reproduction decal for the small premier bench vise! They are 1 5/8" long and 1/4" tall! You are buying 1 decal!
- NEW Handle only RIDGID 40765 to Bench Vise S4A S6A or BC-4a
- 6" Heavy Duty Cross Slide Vise With Metric Dial (3900-2706) - Cross travel and jaw width are 6". Jaw depth is 1-11/16". Jaw opening is 5.8". Longitudinal travel is 8". Ball crank handles are solid and balanced. Base has an 8" X High grade cast body. 5" bolt pattern which is 3.5" center to center and across.
- Kaka Industrial HVS-100 4" Home Vise (Swivel With Anvil) - WE ALWAYS FULFILL WHAT WE HAVE PROMISED. Width of jaw: 3.94" / 100mm. Clamping force: 10KN.
- Kaka Industrial AVS-125 5" American Type Bench Vise - WE ALWAYS FULFILL WHAT WE HAVE PROMISED. Width of jaw:4.92 " / 125mm.
- Kaka Industrial AVS-100 4" American Type Bench Vise (Swivel With Anvil) - WE ALWAYS FULFILL WHAT WE HAVE PROMISED. Width of jaw:3.94" / 100mm.
- Kaka Industrial HPS-150 6” Cast Iron Heavy Duty Bench Vise - WE ALWAYS FULFILL WHAT WE HAVE PROMISED. Ductile Iron body.
- Kaka Industrial HPS-125 5” Ductile Iron Heavy Duty Bench Vise - WE ALWAYS FULFILL WHAT WE HAVE PROMISED. Ductile Iron body. 15KN Clamping force. Throat depth2.72 ”.
- KAKA Industrial HPS-100 4” Ductile Iron Heavy Duty Bench Vise - WE ALWAYS FULFILL WHAT WE HAVE PROMISED. Ductile Iron body. 120°Swivel base. Throat depth2.17 ”.
- KAKA Industrial HPS-75 3” Ductile Iron Heavy Duty Bench Vise - WE ALWAYS FULFILL WHAT WE HAVE PROMISED. Ductile Iron body. 10KN Clamping force. Throat depth 1.97”.
- KAKA Industrial HIS-150 6" Ductile Iron Heavy Duty Bench Vise - WE ALWAYS FULFILL WHAT WE HAVE PROMISED. Ductile Iron body. 29KN Clamping force. Throat depth 3.38”.
- Westward 10D754 5" Diameter Swivel Base For Bench Vise Grainger Blue New Sealed - WESTWARD 10D754 5" DIAMETER SWIVEL BASE FOR BENCH VISES, PIN HOLE DIAMETER 20 MM (25/32 IN), MOUNTING HOLE DIAMETER 14MM (17/32 IN), COOLANT TROUGHS TO CHANNEL FLUID AWAY, WESTWARD BRAND, PER GRAINGER'S WEBSITE ITEM IS BLUE COLOR, BRAND NEW AND FACTORY SEALED, LISTED AS "NEW OTHER" DUE TO SOME WEAR ON THE BOX/PACKAGING FROM STORAGE, STRAPS STILL INTACT, BRAND NEW ITEM OTHERWISE, LOWEST BUY IT NOW LIST PRICE ON EBAY AT TIME OF POSTING!!, ONLY 2 AVAILABLE!!, PLEASE SEE LISTING DESCRIPTION FOR ALL PICTURES AND DETAILS!!.
- 5" Inch High Precision Milling Vise W/Swivel Base Knee Mill Or Bench Mill - Max Jaw Clamping, 13″ (Jaws on outside position, example: clamping a flat plate on top of vise). Jaw Height Approx. 1.425″ (bed slideway to top of jaw). Jaw Width 5-1/4″. Thrust Bearings on lead screw.
- RIDGID NO. 24 BENCH YOKE VISE 1/8" - 3 1/2" GOOD CONDITION Free Shipping!! - BENCH YOKE VISE. BUT IN GOOD CONDITION OVERALL.
- 2'' High Precision Stainless Steel Wire Cut Vise Hardened Milling0002 Mill Lathe - 2" High Precision Stainless Steel Wire Cut Vise. Jaw Opening: 2". Jaw Depth: 0.97". Jaw Width: 1.10". Precision Ground And Hardened Throughout. Made Of Stainless Steel To Resist Erosion. One Piece Body Construction.
- Bench Vise Vice Tube Pipe 6.5 Inch Work Shop Metalworking Garage Workbench Drill - Hand-tightening the two lock knobs on the base secures its position. The body is made of cast steel and has a blue painted finish for mild corrosion protection. The top jaws are made of hardened steel and can be replaced when worn, and the built-in pipe jaws are cast steel.
- Rare Lewis 3" Double slide Bench Vice W /Ex Large 10 1/2" Dia. Swivel Base - It appears to be Lewis 3" jaws opens to 5" 1" more then the ad shows. It has a very large 10 1/2".
- 2 Inch Hardened Stainless Steel High Precision Wire Cut Vise Milling Lathe - Material: Hardened Stainless Steel. Included Case.
- 4 Inch Hardened Stainless Steel High Precision Wire Cut Vise Milling Lathe - High Precision Wire Cut Vise Milling Lathe. Material: Hardened Stainless Steel. Included Case.
- 3 Inch Accu Lock Precision Mill Machine Bench Clamp Vise Accurate To .002 Inch - Eliminating Jaw Tilt.
- Aluminum Aiming Ring 1", Travel, Vise Tool with bench hold NSN 1005-66-155-6676 - USGI Carbine 1" Aluminum Ring for 5.56 Barrel. Ideal for Gunsmith, Aiming, Travel, Vise Tool with bench holder as shown in pictures Gov Issued US Gov contractor issued NSN 1005-66-155-6676.
- *USA* Bench Drill Press Slide Vise X Y Axis Table Milling Drilling Device - 1 Worktable. The X axis Y axis distance is 200mm, the stroke is 50mm. Material: Aluminium Alloy. The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machines.
- Shopfox 4" Bench Vise With Swivel Base Item#D3248 - These precision made Bench Vises feature heavy castings, swivel range with two locking levers, pipe jaws and a perfectly flat anvil face. Milled square center slide ensures jaws stay aligned as the vise is tightened.
- Prentiss Bulldog No 92 Swivel Base 4" Jaw Machinist Fabricator Bench Vise Vice - Item for sale is (1) Prentiss Bulldog No 92 Swivel Base Bench Vise. This vise has 4" jaws.
- 2 Axis Milling Compound Working Table Cross Sliding Bench Drill Vise Fixture - 1 Worktable. The X axis Y axis distance is 200mm, the stroke is 50mm. The table is suitable for Mini Drill and drill bracket series. The working table with three T shaped groove, standard size is. Working table size is 310x90mm and the height of 76mm, two.
- Quick Release Drill Press Vice - Tube and Rod Bench Clamp, Aprox 9in x 4.5in New - This vise is made of sturdy aluminum with a durable ABS handle. This vise has long bench mount openings on each side to enable it to slide to the desired position under your This vise is made of sturdy aluminum with a durable ABS handle.
- Handle & Nut Assembly RIDGID 40765 to Bench Vise S4A S6A or BC-4a - For your consideration, this is a Handle & Nut Assembly RIDGID 40765 to Bench Vise S4A S6A or BC-4a. New in the box.
- Mini Bench Drill Precision Multifunction Working Table Vise Fixture Worktable - Mini multifunctional working table, bench work table can realize the multifunction drilling and milling operation. - The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machines.
- Compound Milling Machine Work Table 2 Axis Cross Slide Bench Drill Vise Fixture - 6.7 in / 170 mm Milling Machine Worktable. The drill press table will be more convenient to adjust the tightness of the worktable with a number of bolts and nuts. Worktable length: 17.7 in / 450 mm. Worktable width: 6.7 in / 170 mm.
- Wilton 28807 1765 Tradesman Vise New - Model 28807. 1765 Tradesman Vise with 6-1/2 in. Jaw Width, 6-1/2 in. Jaw Opening & 4 in. Throat Depth - 28807. Wilton 1765 Tradesman Vise with 6-1/2 in. Throat Depth. Model 1765.
- 3960LB 5" Workshop Rotating Head Bench Vise Swivel Anvil Steel Jaws Shop Clamp - This 5" multi-purpose vise has a 360° rotating head that allows jaws to be used at any position. Product Type: Vise. Includes: 5" Multi-purpose Vise. Positive-locking 360 degree swivel base allows jaws to be used at any position.
- Wilton 28807 6.5-Inch Heavy Duty Jaw Round Tradesman Vise - Model 28807. Wilton 1765 Tradesman Vise, Rounc Channel Vise w/ Swivel Base, 6-1/2" Jaw Width, 6-1/2" Jaw Opening, 4" Throat Depth. Jaw Width (In.). Pipe Jaw Capacity (In.). 1/4 - 3-1/2. Jaw Depth 5/8.
- Columbian Bench Vise (Inv.28612) - (Inv.28612). Not What You Were Looking For?. swivel base.
- Mini Precision Milling Machine Worktable Multifunction Drill Vise Fixture Table - What's Included ? 1*Milling Machine Table Weights & Dimensions Product Weight:1.5kg/3.30lbs Product Size: 31*9*8cm/12.20*3.54*3.14in Specifications Material: Aluminium Alloy X-Route: 20cm/7.87in Y-Route: 5cm/1.96in Distance of Grooves: 34mm/1.33in T-slot Size:15*8*6mm/5.9*3.14*2.36in Scale Travel: 1.25mm (Circle), 0.05mm (One Cell).
- Mini Bench Drill Precision Multifunction Working Table Vise Fixture Worktable - Mini multifunctional working table, bench work table can realize the multifunction drilling and milling operation. - The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machines.
- 8" Super Cross Slide Vise (3901-2708) - 8 Inch Super Cross Slide Vise ~ Suitable for clamping soft materials such as aluminum, copper, etc. ~ Secures firmly on drill press table and moves similar to vertical mill. ~ Accurate positioning in two directions (crossed). ~ Each dial is graduated in .1mm increments for precise adjustments and easily adjusts to 0. ~ Dial is in 1mm increments. ~ Ball crank handles are solid and balanced. ~ Feed screws have precision cut acme threads. ~ High grade cast body. ~ Heat treated steel jaws. ~ Jaws interchangeable with Wilton. ~ Jaw depth is 2.09". ~ Cross travel is 8". ~ Jaw opening is 8". ~ Longitudinal travel is 8".
- NEW! Yost 445 4-1/2" Apprentice Series Utility Bench Vise!! - The Yost Apprentice Bench Vise is designed to fit the needs of a general clamping needs. TYPE Apprentice. JAW WIDTH 4-1/2". MANUFACTURERS PART NUMBER 445. WEIGHT LBS 17. COLOR FINISH Blue. TYPE OF BASE Swivel.
- NEW! Yost 5-1/8" Multi-Jaw Rotating Pipe & Bench Vise!! - Yost 5-1/8" Multi-Jaw Rotating Pipe & Bench Vise! Yost 5-1/8" Multi-Jaw Rotating General Purpose Pipe & Bench Vise. The head rotates 360 degrees, with locking pine every 30 degrees. Marking scales for head rotation and vise opening.
- NEW! Wilton General Purpose 4" Jaw Bench Vise With Swivel Base!! - Grooved steel jaw inserts. JAW WIDTH 4". Double lock down swivel base. BASE TYPE 180° Swivel. TYPE OF BASE 180° Swivel. TYPE General Purpose. MANUFACTURERS PART NUMBER 11104. THROAT DEPTH 2-1/4".
- NEW! Yost 465 6-1/2" Apprentice Series Utility Bench Vise!! - The Yost Apprentice Bench Vise is designed to fit the needs of a general clamping needs. TYPE Apprentice. MANUFACTURERS PART NUMBER 465. JAW WIDTH 6-1/2". WEIGHT LBS 41. SIZE 5-1/2". BASE TYPE 360° Swivel.
- 8" x 8" Steel Bench Vise Plate Hitch Mounted for 2" Receiver 22" Receiver Bar - This Pro-Grade Hitch Mounted Vise Plate allows you to take your vise to any job site or location where you can't mount to a bench. With its heavy duty all steel and powder coated construction, it is sure to stand up to all conditions. Fits a standard 2" receiver.
- Wilton 10010 ATV All Terrain Vise for 2" Receiver Hitch or Bench Mount - WILTON 10010 ATV ALL TERRAIN VISE HITCH OR BENCH MOUNT. DOUBLE LOCK DOWN SWIVEL, 120 DEGREE SWIVEL, 6" JAW WIDTH, 3 " THROAT DEPTH, STEEL JAW INSERTS AND SOLID DESIGN, BUILT TO LAST CRAFTED OF HIGH STRENGTH STEEL, GROOVED STEEL JAW INSERTS.
- Heavy Duty 4" CLAMP ON VISE BENCH TOP TABLE SWIVEL SPINNING BASE VICE - Secure materials in place with this portable vise. This heavy duty, clamp-on, swivel portable vise has a throat depth of 2" and a jaw width of 4". The max opening is 2-1/4". This bench vise has a replaceable jaw type.
- Wilton 4" Benchtop Spinning Swivel Base Vise Anvil Bench Clamp Vice - The max opening is 4". This bench vise has a replaceable jaw type. It is made of high strength steel material. Grooved steel jaw inserts provide a secure grip on materials in the vise. Large anvil work surface perfect for striking when needed.
- Bench Truck Portable Vise Trailer Hitch Mounting Bracket Work Shop Clamp Tool - Secure it in your hitch or mount it on your bench. The Bench Truck Portable Vise is built to keep up with you, when you're on the clock or off the grid. Sealed design protects internal components from water and debris.
- Wilton 4" Jaw Width, 2-1/4" Opening Capacity, 2" Throat Depth, Steel Swivel B... - Wilton 4" Jaw Width, 2-1/4" Opening Capacity, 2" Throat Depth, Steel Swivel Bench Vise Clamp-On Base Attachment, 10" Long x 5.4" Wide x 10.1" High
- Gibraltar 2-1/2" Jaw Width, 2-1/2" Opening Capacity, 1-5/8" Throat Depth, Cas... - Gibraltar 2-1/2" Jaw Width, 2-1/2" Opening Capacity, 1-5/8" Throat Depth, Cast Iron Swivel Bench Vise Clamp-On Base Attachment
- Columbian D45-M4 Swivel Base Bench Vise MAKE OFFER! - Swivel-Base Bench Vise. Used Take Out. Made in USA.
- Bench Vise Clamp Jaw Rotation Vice Small Jobs Knife Gunsmithing Reloading Work - The Yost BV-4 4" bench vise is an all-purpose bench vise. The replaceable serrated jaws will prevent objects from moving around once you have clamped them in place. The anvil is machined to provide a smooth work surface.
- New!! Westward 3" Width Bench Vise, Regular Duty, 10D714 - MODEL 10D714. 3" WIDTH BENCH VISE. Jaw Type Replaceable Top Jaw, Fixed Pipe Jaw. Jaw Width 3". Jaw Face Serrated. Overall Width 4-1/2". Overall Height 5-15/32". Overall Length 8-21/32".
- Chas Parker Bench Vise Model 974 (Inv. 26845) - Chas Parker Bench Vise Model 974. (Inv.26845). Not What You Were Looking For?.
- Chas Parker 974B Bench Vise (Inv.32013) - (Inv.32013). Not What You Were Looking For?.
- NEW PanaVise Multi-Angle Vise Screw Mount Table Bench Vise Wide Opening - Nice find from a local estate sale. New, never mounted out of box. Jaws look to open about 3".
- Pen Blank Drilling Center Vise Work Bench Drill Press Jig Wood Turner Craft Tool - Easily locate and drill pen blank centers with the Pen Blank Drilling Center Vise. Set the jig up once and all your pen blanks will be centered. There is no need to change the setup again. Pen Blank Drilling Center Vise Features.
- Gibraltar 3" Jaw Width, 2-1/2" Opening Capacity, 2-5/8" Throat Depth, Cast Ir... - Gibraltar 3" Jaw Width, 2-1/2" Opening Capacity, 2-5/8" Throat Depth, Cast Iron Stationary Bench Vise Clamp-On Base Attachment
- HFS(R) 4" Heavy Duty Bench Vise - 360 Swivel Base With Lock - [JAW]: Replaceable, hardened, forged steel jaws. [LOCKING BASE]: Double locking 360°swivel base perfect for turning any direction you want after mounting.
- 2" Jaws Table Bench Top Vise with Clamp Swivel Base 19282 - Model: 19282. This 2" bench vise is crafted and designed to provide dependable service and long life! This vise is constructed from cast steel. The jaws and anvil have been hardened. The base swivels 360° and locks in place with two lockdown bolts.
- MACHINIST TOOL LATHE MILL Machinist 2 1/2" Anvil Bench Vise Watchmaker Jewelers - NO EXCEPTIONS.
- Alloy Aluminium Universal 360 Adjustable Table Vise Suction Clamp Bench Vice - 1x Suction Vise Clamp. Maximum jaw opening: with rubber pads 64mm, without rubber pads 72mm. Jaw Width: approx 60 mm. 360 degree rotation, 90 degree tilt. Material: Alloy Aluminum. It can be adsorbed on a flat work surface, Great for jewelry, electronics repair, soldering.
- PanaVise 301 Bench Single Knob 3-Axis Rotation Vise - Jaws are 2.5” (63.5 mm) wide, 0.5” (12.6 mm) tall and open to 2.25” (57.1 mm). The Item may vary from picture as manufacture may change model appearance. Model Number The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
- Rm2002 Small Bench Vise 2" For Jewelry Work Hobbyist - Small Bench Vise, Suitable for Jewelry Work / Hobbyist. Two holes for mounting or bottom clamp for mounting. Jaws open to 2”.
- Mini Bench Drill Precision Multifunction Working Table Vise Fixture Worktable - Mini multifunctional working table, bench work table can realize the multifunction drilling and milling operation. - The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machines.
- 5-1/2" Multi-purpose Rotating Bench Vise #850-9460-new - 5-1/2" Multi-purpose Rotating Bench Vise. Pipe jaws max. Open : 3-1/2. "V" Jaws Max. Open: 4-1/2". Anvil size: 3x4"3.
- Mini Bench Drill Precision Multifunction Working Table Vise Fixture Worktable - Mini multifunctional working table, bench work table can realize the multifunction drilling and milling operation. - The table is suitable for Mini Drill and drill bracket series. It can also apply to other suitable machines.
- Bessey Tools Model BV-C030 3 Inch (75mm) Light Duty Clamp On Bench Table Vise - This has Opening Capacity of 2 2/5 in. (60mm), has cast in pipe jaws, and double steel guide bars. 8" x 6" and the clamp on table part opens to approx. Condition : This is in very good condition.
- 3" Heavy Duty Cross Slide Vise With Metric Dial (3900-2703) - Cross travel and jaw width are 3". Jaw depth is 1-1/8". Jaw opening is 2.8". Longitudinal travel is 5". Weight is 17 lbs. Ball crank handles are solid and balanced. High grade cast body. Base has an 8" X 5" bolt pattern which is 3.5" center to center and across.
- 4" Super Cross Slide Vise (3901-2704) - Jaw depth is 1.81". Jaw opening is 4". Ball crank handles are solid and balanced. High grade cast body. Cross travel is 4". Longitudinal travel is 5". Accurate positioning in two directions (crossed).
- 3" Super Cross Slide Vise (3901-2703) - Jaw depth is 1.38". Jaw opening is 3". Ball crank handles are solid and balanced. High grade cast body. Cross travel is 3". Longitudinal travel is 5". Accurate positioning in two directions (crossed).
- 6" Super Cross Slide Vise (3901-2706) - Jaw depth is 2.09". Jaw opening is 6". Ball crank handles are solid and balanced. High grade cast body. Cross travel is 6". Longitudinal travel is 8". Accurate positioning in two directions (crossed).
- 5" Super Cross Slide Vise (3901-2705) - Jaw depth is 1.97". Jaw opening is 5". Ball crank handles are solid and balanced. High grade cast body. Cross travel is 5". Longitudinal travel is 6". Accurate positioning in two directions (crossed).
- Magnetic Bench Soft Vice Jaws Engineers 125Mm / 5" Felt Aluminium Rdgtools - FELT ALUMINIUM MAGNETIC JAWS 5" LONG. PAIR OF MAGNETIC JAWS 125MM/5" LONG. MADE FROM ALUMINIUM (WITH MAGNETIC INSERTS).
- Baby Bench Vise with Swivel Base 2 Inch - AVB-1391 - This 2" bench vise is crafted and designed to provide dependable service and long life! This vise is constructed from cast steel. The jaws and anvil have been hardened. The base swivels 360° and locks in place with two lockdown bolts.
- 5" Bench Vise with Anvil Swivel Locking Base Table Top Clamp Heavy Duty Vice - Oversized striking anvil. Hardened and polished replaceable jaws and large anvil. 360° Double locking swivel base. Swivel base allow you to get the angle on your workpiece. We will not fulfill orders where the information does not match.
- Pro Mini Tool Soft Jaw Vice Universal Clamp On Hobby Jeweler's Bench Table Vise - Open capacity is 2-1/2". Vise can be rotated 360-Degree and pivots 90-Degree positioning work without removing clamped part from the vise jaws. Vacuum Base Vise mounts on any smooth work surface for work holding where you need it, such as laminates, steel, granite, glass and others.
- 5" Multi-purpose Rotating Bench Vise #850-RT5-new - 5" Multi-purpose Rotating Bench Vise. W.T: 39 LBS. Anvil size: 2-3/8x3-1/8. "V" Jaws Max.
- 4" Multi-purpose Rotating Bench Vise #850-RT4-new - 4" Multi-purpose Rotating Bench Vise. Open: 3-1/2". "V" Jaws Max. Anvil size: 2-3/8x3-1/8.
- Heavy Duty 4" Jaw Bench Vise (101872) - CL (101872). Heavy duty bench vise. 4" Jaw width. Max jaw opening 10". Aprox weight 50lb.
- 4" Bench Steel Vise with Anvil Swivel Locking Base Clamp Work Top Table Tool - Swivel base allow you to get the angle on your workpiece. Hardened and polished replaceable jaws and large anvil. Oversized striking anvil. Hardened and polished replaceable jaws and large anvil. 360° Double locking swivel base.
- Mini Vise Bench Tool Swivel Lock Clamp 1-1/2" Vise Miniature Made of Aluminum - MINI VISE TABLE VISE 1-1/2" WITH CLAMP. A- MINI sized table vise with a clamp, with 1-1/2" jaws that can be attached to table, lightweight almost pocket size. Jaws of the vise are smooth and open to a maximum of 1-3/16".
- 2" Swivel Bench Vise Clamp With Anvil Vice Hobby Tool Table Vise type 50mm - 2" Swivel Table Bench Vice Clamp With Anvil 50mm. Maximum jaw opening 2". 360 degree locking swivel base. Mounting clamp jaws open 1-3/4" max. Manufactured from die cast iron. We will not fulfill orders where the information does not match.
- Vises Bench Swivel w/ Clamp 3" Tabletop Vise Tilt Rotates 360° Work Bench Tool - Table-top clamping vise is well made, functional and yet economical. VISE FOR BENCH - TABLETOP 3". 360 ° SWIVEL VISE WITH CLAMP. - Vise Jaws Opens: 2" - 50mm (With Rubber Jaw Insert). - Vise Clamp Opens: 2-1/8" - 53.5mm.