100
5" Sine Bar, 5" On Center Rolls, Fixture, Jig, Toolmaker Made, Hard, Ground, EC
$28.97 Buy It Now or Best Offer
BROWN & SHARPE # 598-291-500 x 5" Sine Bar, 5" On Center Rolls, Fixture, Jig, EC
$48.97 Buy It Now or Best Offer
T- Slot Table/Anti Vibration Platen
$12,600.00 Buy It Now or Best Offer
Gorman-Rupp Pumps 42111-921 Cover Plate Cast Iron 2986 USED
$599.99 Buy It Now or Best Offer
Gorman-Rupp Pumps 42111-921 Cover Plate Cast Iron 2986 USED
$577.45 Buy It Now or Best Offer
precise fixture plate for cnc machine at sale
$118.45 Buy It Now or Best Offer
cnc precise fixture plate 6 x 6 x 1/2 at sale
$85.14 Buy It Now or Best Offer
4 watchers15’ x 4' T-Slot / Acorn / Weldsale / Platen / Welding Table Layout Plate
$6,000.00 Buy It Now or Best Offer
Lang style zero point Aluminum Blank Raster Plate
$129.00 Buy It Now
Lang style zero point Raster Plate
$179.99 Buy It Now
WATCHMAKER ANGLE PLATE MACHINIST TOOLMAKER HARDENED GRIND FIXTURE tapped
$109.99 Buy It Now or Best Offer
5" Sine Bar, 5" On Center Rolls, Jig, 1-1/8" Wide, Hard, Tapped, (2) Side Stops
$31.97 Buy It Now or Best Offer
ROBBINS XLO Compound Sine Plate Fixture Jig, # A-10, SN 47-508, Ex-Cell-O Corp
$309.97 Buy It Now or Best Offer
Hougen 12429 29MM X 50MM "12,000-Series" Annular Cutter
$93.99 Buy It Now
ICS 15-5/8" x 2-3/4" x 2" Workpiece Holding Jig From A Agiecut 100
$189.99 Buy It Now
4-5/8" x 3-1/4" x 2-5/8"Workpiece Holding Jig W/7/8" Guide From A Agiecut 100
$89.99 Buy It Now
5 watchersLang style, SOLIDPoint, zero-point plate (96mm) for quick clamping
$894.00 Buy It Now or Best Offer
1 watcherUnused 9" dia. Fixture Plate for A5 Spindle Nose - could be used as a chuck back
$100.00 Buy It Now
1 watcherLang style zero point Dovetail fixture with Raster Plate
$500.00 Buy It Now
2 watchersLang style, SOLIDPoint 96, Zero Point single Plate. Pre-drilled for Yasda PX30i
$885.50 Buy It Now or Best Offer
HUGE 10" Sine Bar, 10" On Center Rolls, 2-3/4" Wide x 2-1/2" Tall, Toned / Rusty
$52.97 Buy It Now or Best Offer
3 watchersLang style, SOLIDPoint 52, Zero Point Plate 52mm for quick clamping (45150)
$603.00 Buy It Now or Best Offer
1 watcherLang style zero point plate 96/52 size with dual pull stud technology. (45400)
$960.00 Buy It Now or Best Offer
1 watcherRayco 12" x 12" x 1/2" CMM Fixture Plate
$695.00 Buy It Now
3 watchersAcorn Welding Table 48"W x 144"L x 24"H - Used - AM22262
$9,800.00 Buy It Now or Best Offer
2 watchersAcorn Welding Table 48"W x 144"L x 24"H - Used - AM22261
$9,800.00 Buy It Now or Best Offer
1 watcherAcorn Welding Table 48"W x 144"L x 24"H - Used - AM22260
$9,800.00 Buy It Now or Best Offer
3 watchersAcorn Welding Table 48"W x 144"L x 24"H - Used - AM22259
$9,800.00 Buy It Now or Best Offer
CNC Stamping Machining Industrial Aluminum Metal Pure Plate with Protective Film
$29.90 Buy It Now
2 watcherst slot fixture plate 40x30cm, aluminum, t-track, metalworking, cnc bed
$427.00 Buy It Now
19 watchers1/2” thick aluminum tool & jig plate
$15.00 Buy It Now
1 watcher27"L x 16"W x 10.5" Steel Ground Top Riser Block, Machining Support Fixture
$349.99 Buy It Now
1 watcherSouth Bend Faceplate, 12" Diameter With 1 3/4"- 8 Threads
$165.00 Buy It Now
Cast Iron Big Right Angle Plate 3-5/32 High, 7-3/4 Wide, 4-1/4 Deep
$77.87 0 Bids or Best Offer 4h 2m
1 watcherCast Iron Right Angle Plate 5” High, 3-3/4”Wide 4” Deep. Made In USA
$37.87 0 Bids or Best Offer 5h 33m
1 watcherFace Plate Cylindrical Grinder Taper Mount 9-1/2” Machinist Tool ? MT5 Jarno 14?
$225.00 Buy It Now
1 watcher5" Sine Bar, 5" On Center Rolls, Work Fixture, Jig, 3/4" Wide, Hard, Tapped, EC
$31.97 Buy It Now or Best Offer
3 watchers2 Piece Set of 6-1/2" W x 10" D x 18" H Right Angle Mill Milling Fixture Plates
$200.00 Buy It Now
1 watcherT-Slotted Right Angle Mill Milling Fixture Plate 5/8" T-Slots 24" W x 9" H x 8"D
$600.00 Buy It Now
1 watcherVtg Sm Jorgensen Bridgeport Right Left Index Milling Machine Fixture Tool Holder
$49.00 Buy It Now
4 watchersWelding T-Slot Table / Platen / Acorn / Weldsale – 120” x 60” x 13” Thick
$4,495.00 Buy It Now
6 watchersWelding T-Slot Table / Platen / Acorn / Weldsale – 180” x 60” x 7” Thick
$4,995.00 Buy It Now
1 watcherAluminum Work Holding Fixture Jig Plate CNC Machining Milling Chuck Clamps
$350.00 Buy It Now
NEW Sine Plate Back Stop, Will Fit Plates, Fixtures, Jigs on 1-9/16" Centers NOS
$16.97 Buy It Now or Best Offer
10 watchersAluminum Excrusion T-Slot Table Plate // Isel-Automation / Isel-USA
$450.00 Buy It Now or Best Offer
3 watchersRoland MDX-540 Replacement Table NEW
$925.00 Buy It Now or Best Offer
16X12X11.75" Webbed Angle Plates With Mounting Slots Cast Iron
$400.00 Buy It Now or Best Offer
2 watchersCNC Pallet Adapter - Vise Riser Base Plate 11.9" OD x 3.5" Tall See Description
$155.00 Buy It Now
1 watcherCNC Pallet Adapter - Vise Riser Base Plate 11-3/4" OD 3-1/2" Tall - See descript
$155.00 Buy It Now
Cast aluminium T-slot plate 12" x 10" - refurbished
$285.00 Buy It Now
104 watchersAluminum Sacrificial Fixture Plate~ 24 1/4" x 13 7/16" CNC ROUTER LASER MILL
$25.00 Buy It Now or Best Offer
18" x 48" Workholding T-Slot Table 1" Slots Cast Iron Webbed With Drip Pan
$999.99$926.24 Buy It Now or Best Offer
4 watchersT-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 24"x24", USA Made!
$663.00 Buy It Now
T-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 22"x16", USA Made!
$405.00 Buy It Now
1 watcherT-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 20"x20", USA Made!
$460.00 Buy It Now
1 watcherT-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 18"x18", USA Made!
$373.00 Buy It Now
2 watchersT-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 14"x12", USA Made!
$194.00 Buy It Now
8 watchersT-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 14"x14", USA Made!
$226.00 Buy It Now
2 watchersT-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 24"x12", USA Made!
$332.00 Buy It Now
4 watchersT-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 20"x8", USA Made!
$184.00 Buy It Now
1 watcherSine Plate, 5" Center Rolls, Opens 90° + Degree, Degrees Fixture, Jig, Angle, EC
$118.97 Buy It Now or Best Offer
1 watcherHitachi Seiki VK65 1000mm x 630mm CNC Machine Work Holding Pallet Fixture Plate
$1,499.99$835.97 Buy It Now or Best Offer
3 watchers
ROUND ALUMINUM FIXTURE PLATE tool die sheet flat stock 1/2" thick x 16 7/8" DIA$69.00 Buy It Now or Best Offer
1 watcher ROUND ALUMINUM FIXTURE PLATE tool die sheet flat stock 1/2" thick x 16 3/4" DIA$69.00 Buy It Now or Best Offer
SPB632 SPB32-6 Blade Grooving Slotting tool Cut Off Plate tool For SP600 ZQMX6N
$19.96 Buy It Now or Best Offer
Sine Plate , 5" Center To Center. X 2" Wide.
$45.00 0 Bids or Buy It Now 6d 4h
12 watchers15"x15"x1.18" Aluminum 6061 Fixture Plate Custom CNC Machining Manufacturing
$190.00 Buy It Now
10 watchers10"x10"x1.1" Aluminum 6061 Fixture Plate Jig Custom CNC Machining Manufacturing
$100.00 Buy It Now
13 watchers16"x16"x1.1" Fixture Plate Aluminum 6061 Tooling Jig Custom CNC manufacturing
$217.00 Buy It Now
24 watchers30"x16"x1.1" Aluminum 6061 Tooling Fixture Plate Jig Custom cnc manufacturing
$369.00 Buy It Now
2 watchers36" X 52" T Slotted Cast Plate
$895.00 Buy It Now or Best Offer
Seikoh Giken TK-032327494-01-B0002 Counter Plate Stamper New
$999.00 Buy It Now or Best Offer
15" Long x 2" Thick Y-Shaped Tooling Plate
$263.99 Buy It Now
24 watchers16’-4” x 6’-7” T-Slot / Acorn / Weldsale / Platen / Welding Table Layout Plate
$4,995.00 Buy It Now
SMC Blanking Plate VVS806011A Factory Sealed
$11.55 Buy It Now or Best Offer
11 watchersSine Plate, 5" Center Rolls, Opens 90° + Degree, Degrees Fixture, Jig, Angle, EC
$109.97 Buy It Now or Best Offer
2 watchersMilling Fixture for Milling Machine 45 Degree Used
$74.99 Buy It Now
43 watchers5" x 6" x 1/2" MIC 6 Aluminum Fixture / Sacrificial Plate, Mini Pallet,QTY: 1
$55.00 Buy It Now
39 watchers6" x 8" x 1/2" MIC 6 Aluminum Fixture / Sacrificial Plate, Mini Pallet,QTY: 1
$69.00 Buy It Now
8 watchersT-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 20"x10", USA Made!
$230.00 Buy It Now
6 watchers(6) T-Slot T-Nuts, 1/4-20 threads, Fits ClampuSystems T-Slot Plates, USA Made!
$12.60 Buy It Now
16 watchersT-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 12"x12", USA Made!
$166.00 Buy It Now
2 watchersT-Slot Plate, Aluminum, T-track, Metalworking, Fixture Plate 8"x8", USA Made!
$75.00 Buy It Now
9 watchersT-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 24"x8", USA Made!
$220.00 Buy It Now
3 watchersT-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 24"x6", USA Made!
$166.00 Buy It Now
5 watchersT-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 20"x12", USA Made!
$276.00 Buy It Now
T-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 16"x16", USA Made!
$295.00 Buy It Now
5 watchersT-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 16"x12", USA Made!
$220.00 Buy It Now
8 watchersT-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 12"x10", USA Made!
$138.00 Buy It Now
7 watchersT-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 12"x8", USA Made!
$110.00 Buy It Now
7 watchersT-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 12"x6", USA Made!
$83.00 Buy It Now
5 watchersT-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 10"x10", USA Made!
$115.00 Buy It Now
2 watchersT-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 10"x8", USA Made!
$92.00 Buy It Now
20 watchersT-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 8"x6", USA Made!
$55.00 Buy It Now
2 watchers8" x 6" x 1" Steel Fixture Plate
$139.99 Buy It Now or Best Offer
14" x 18.125" x 3" Gridded T-Slot Plate
$1,199.99 Buy It Now or Best Offer
3 watchers2.75" x 28" x 48" Aluminum Fixture Plate
$3,250.00 Buy It Now or Best Offer
3.75" x 20.75" x 50" Aluminum Fixture Plate
$3,650.00 Buy It Now or Best Offer
2 watchers14.3" X 5" X 1" Fixture Plate
$160.00 Buy It Now or Best Offer
Chick Workholding 1550 Coverplate 150W x 500L Standard MCPS15-150.500
$140.21 Buy It Now
- Chick Workholding 1550 Coverplate 150W x 500L Extended Travel MCPX15-150.500 - For security purposes, all of our parts are sealed and or marked so that they can be identified. Location: JJ27.2.
- Chick Workholding 1040 Coverplate 100W x 400L Standard MCPS10-100.400 - For security purposes, all of our parts are sealed and or marked so that they can be identified. Location: JJ25.2.
- System 3R 3Refix Expanding Locating Mandrels and Torque Wrench - · Universal system. work piece weight 100Kg. · Repeatability <0.005mm.
- 6" Sine Bar, 6" On Center Rolls, Work Fixture, Jig, 2-3/8" Wide, Hard,Tapped VGC - 6" Sine Bar, 6" On Center Rolls, Work Fixture, Jig, 2-3/8" Wide x 7-1/2" OAL, Tapped on the sides and end for a stop. (no stop is on the bar). It is hardened and precision ground and tapped on the sides and one end.
- SPB326 SPB26-3 Blade Grooving Slotting Tool Cut Off Plate Tool for SP300 ZQMX3N - Model：SPB326. 1 x SPB326. Suitable Inserts：SP300 (inserts not included). Blade Height （H） : 26 mm. Color : Red.
- Pragebacken AK-005192 LANG Technovation Stamping Jaw PART Art.Nr. 41111 - Only one item had part number on it. Location: TR23.
- Sine Plate Back Stop, Will Fit Plates, Work Fixtures, Jigs on 2.625" Centers, EC - Sine Plate Back Stop, Will Fit Plates, Work Fixture, Jigs. The slots are just under 2-5/8" (2.625") on center and the tool looks excellent. This back stop is hardened and ground and fully machined.
- 8" x 8" x 1/2" MIC 6 Aluminum Fixture / Sacrificial Plate, Mini Pallet,QTY: 1 - Flatness within 0.0015" and parallelism of top and bottom 0.002" or better. If better flatness and parallelism is required we suggest to take a minimal cleanup of top surface to match your machine. Constructed 100% out of MIC & ALUMINUM TOOLING PLATE - USA Material - CNC machined.
- Machinist Mill or lathe Spray Mist spray generator System
- (2) Press Brake Right Angle Plate Set 5 3/4 X 5 3/4 X 13 feet long 3/4 thick - 3/4 angle with 1 in gussets 12 in.
- Machinists U shaped ground fixture jig 10 x 6 x 4" - Machinists U shaped ground fixture jig. weighs 20 Lbs. used condition.
- t slot fixture plate 24" x 12", aluminum, t-track, metalworking, cnc bed - The T-slot plate is supplied with a smooth, closed bottom ; that allows you to suck the plate on a vacuum table. t-slot plate 24" x 12" - 100% cast aluminum.
- Jergens Sub Plate Fixture Table Ball Lock BLL-20-075 CNC Quick Change CNC 934696 - 20" x 10" Jergens # 934696 MultiPurpose Fixture-Sub Plate with Ball Lock System: BLL-20-075. Often table mounted with vises & tombstones for CNC Vertical & Horizontal Machining Centers (Mazak, Mori Seiki, Haas, Bridgeport, Fadal, Okuma, OKK, Milltronics, Hurco, Makino, Kitamura, Daewoo, Doosan, Hardinge, Fryer, Kia, Kiwa, Hitachi Seiki, Yasda).
- Mitee-Bite M12 x 1.75 Loc-Down Quick Change Receiver & Blank Pallet - Blank pallet is fastened to the receiver with our Loc-Down® System, two turns of the Loc-Down® releases the pallet. MITEE-BITE announces the addition of a cost effective simple Quick Change Receiver System allowing for the rapid change out and precise location of small fixture pallets.
- Mitee-Bite 1/2-13 Loc-Down Quick Change Receiver & Blank Pallet - Blank pallet is fastened to the receiver with our Loc-Down® System, two turns of the Loc-Down® releases the pallet. MITEE-BITE announces the addition of a cost effective simple Quick Change Receiver System allowing for the rapid change out and precise location of small fixture pallets.
- 3Refix Reference Table w/8 Expanding Mandrels - Wire EDM w/Support Stand - Hardened 3Refix Reference Table Including 8 Expanding Mandrels. This beautiful 3Refix Custom Reference Table was custom manufactured for a high precision die making application. The working space is much larger than typical, which adds to the overall flexibility in use.
- Lot of 3 Anodized Aluminum Fixture Plates (5544) - Lot of 3 Anodized Aluminum Bracket Plates.
- Precision Angle Bracket (5482)
- 6" x 6" x 1/2" MIC 6 Aluminum Fixture / Sacrificial Plate, Mini Pallet,QTY: 1 - Flatness within 0.0015" and parallelism of top and bottom 0.002" or better. If better flatness and parallelism is required we suggest to take a minimal cleanup of top surface to match your machine. Constructed 100% out of MIC & ALUMINUM TOOLING PLATE - USA Material - CNC machined.
- Rotary Table Alignment Fixture - Index Designs, LLC - Machine Axis Calibration - Now, we can get an accurate center line for our Y axis. Without this tool we would have to indicate the face plate of the table using the Z axis and Y axis. This of course effects performance. Imagine a top view and a side view of the rotary table on the desired axis were it is set, in this case we are on the X axis.
- NEW GE 677-11-65-04 7H Turbine Supply Manifold Leak Check Fixture - We're down to earth, easy to work with people. Fast Dispatch Service.
- NEW GE 677-11-65-03 677-11-65-04 Red Blue 7H Turbine Assembly - We're down to earth, easy to work with people. PRODUCT INFORMATION Fast Dispatch Service.
- CNC Lathe Turning Center Work Holding Pallet Fixture 39-5/16" x 24-3/4" - Prefer to pick it up yourself?. Country of Manufacture: N/A. Will there be a dock or forklift. Need it urgently?. Call us and we will do what we can to get it to you quickly. center is raised and is 24-13/16" OD.
- Leave BP04-50630-0630 25"x25" Modular Machinist Setup Block 90° Work Holding Ji - Prefer to pick it up yourself?. Country of Manufacture: United States. Will there be a dock or forklift. Single Column 3 sided is 13-3/4" Square x 25-3/4" tall. Need it urgently?. Call us and we will do what we can to get it to you quickly.
- Sacrificial fixture plate - 8" x 16" aluminum - 3/8" holes - Sacrificial fixture plate with 233 tapped holes (3/8" x 16tpi). Made from 6061 aluminum.
- 9-1/4" x 8-3/4" x 8" Heavy Duty Right Angle Mill Milling Set-Up Fixture Plate - Up for sale: 9-1/4" x 8-3/4" x 8" Heavy Duty Right Angle Mill Milling Set-Up Fixture Plate.
- 18" x 36" Cincinnati Milacron T-Slotted Angle Plate Cast Iron 18" Base - Cincinnati Ohio 45241. We box it up, and put it on a skid. Heavy and will need a common carrier. From Outside the US & Canada call 15137712111. Our FAX number is 15137712552.
- 7 Lbs 5C Steel Collet Fixture Mount 3''x 3'' Precision Lathe Plate 3'' Diameter - Lathe Tool Used In Place Of Face Fixtures. Precision Ground All Over, Black Oxide Finish. Head Length Heat Treated Tool Steel Shank. Soft Head For Easy Machining. Unit Weight Quantity: 1.
- Single T-Slot fixture plate 5 x 15" - Weighs 20 Lbs.
- 15-3/4" x 9-3/4" x 15" Wide Machinist Right Angle Set-Up Fixture Plate: Used - Up for sale: 15-3/4" x 9-3/4" x 15" Wide Machinist Right Angle Set-Up Fixture Plate: Used. Pick up is free.
- Knee Plate 90 Degree Steel Precision Bolt on Milling Fixture - Palm Tree # LR-0000-091419LR-28. They are subject to withdrawal, change and prior sale without notice. All orders received are binding only when they have been accepted and acknowledged by us in writing.
- 8-7/8" x 8-1/8" x 10" W Cast Iron Right Angle Mill Milling Set-Up Fixture Plate - Up for sale: 8-7/8" x 8-1/8" x 10" W Cast Iron Right Angle Mill Milling Set-Up Fixture Plate.
- 48" X 36" X 6" Solid Steel Bolster Plate: Yoder #54524 - YODER MACHINERY SALES. We load for free. S hipping rates available! LENGTH OF PLATE. . 48". SOLID STEEL. YES. WIDTH OF PLATE. . PLATE THICKNESS. . 6".
- Precision 5C Fixture Mount Lathe Steel Collet Face Plate 2'' x 1'' - Lathe Tool Used In Place Of Face Fixtures. Precision Ground All Over, Black Oxide Finish. Soft Head For Easy Machining, Heat Treated Tool Steel Shank. Head Length Unit Weight.
- 10' X 50" Solid Steel Bolster Plate: Yoder #50749 - YODER MACHINERY SALES. We load for free. S hipping rates available! SOLID STEEL. . YES. LENGTH OF PLATE. . 120-1/2". WIDTH OF PLATE. .
- 2'' Precision Lathe Face Plate 5C Fixture Mount Steel Collet 2'' x 2'' - Lathe tool used in place of face fixtures. Precision ground all over. Head Length Heat treated tool steel shank. Soft head for easy machining. Unit Weight Quantity: 1.
- 3'' Diameter Steel Collet 3'' x 3'' 5C Fixture Mount Precision Lathe Face Plate - Heat Treated Tool Steel Collet Shank. Lathe Tool Used In Place Of Face Fixtures. Precision Ground All Over, Black Oxide Finish. Soft Head For Easy Machining.
- 3'' x 2'' 5C Fixture Mount Precision Lathe Face Plate 3'' Diameter Steel Collet - Heat Treated Tool Steel Collet Shank. Lathe Tool Used In Place Of Face Fixtures. Precision Ground All Over, Black Oxide Finish. Soft Head For Easy Machining.
- Fixture Mount Precision Lathe Face Plate 2'' Diameter Steel Collet 2'' x 1'' 5C - Precision Ground All Over, Black Oxide Finish. Heat Treated Tool Steel Shank. Soft Head For Easy Machining. Light Item.
- 3'' x 3'' 5C Steel Collet Fixture Mount Precision Lathe Face Plate 3'' Diameter - 3" x 3" 5C Fixture Mount. Lathe tool used in place of face fixtures. Precision ground all over, black oxide finish. Head length: 3". Heat treated tool steel shank. Soft head for easy machining. Weight: 7 Lbs.
- 3'' x 2'' 5C Fixture Mount Precision Lathe Face Plate 3'' Diameter Steel Collet - 3" x 2" 5C Fixture Mount. Lathe tool used in place of face fixtures. Precision ground all over, black oxide finish. Head length: 2". Heat treated tool steel shank. Soft head for easy machining. Weight: 4.60 Lbs.
- 2'' x 2'' 5C Fixture Mount Precision Lathe Face Plate 2'' Diameter Steel Collet - 2" x 2" 5C fixture mount. Lathe tool used in place of face fixtures. Precision ground allover. Head length: 2". Heat treated tool steel shank. Soft head for easy machining. Weight: 2.25 Lbs.
- 2'' x 3'' 5C Fixture Mount Precision Lathe Face Plate 2'' Diameter Steel Collet - 2" x 3" 5C Fixture Mount. Lathe tool used in place of face fixtures. Precision ground all over, black oxide finish. Head length: 3". Heat treated tool steel shank. Soft head for easy machining. Weight: 3.40 Lbs.
- 2'' x 1'' 5C Fixture Mount Precision Lathe Face Plate 2'' Diameter Steel Collet - 2" x 1" 5C Fixture Mount. Lathe tool used in place of face fixtures. Precision ground all over, black oxide finish. Head length: 1". Heat treated tool steel shank. Soft head for easy machining. Weight: 1.15 Lbs.
- 3" Head Diameter 5C Fixture Mount Lathe Tool Milling Machine - Heat Treated Tool Steel. Soft Head Type.
- Sacrificial fixture plate or mini pallet - 8" x 16" aluminum - Sacrificial fixture plate with 465 tapped holes (1/4" x 20tpi). Made from 6061 aluminum.
- CNC Machine Pallet 400mm Pallet off Mitsubishi M-H4A Horizontal Machining Center - 400mm Pallet off Mitsubishi M-H4A Horizontal Machining Center. CNC Machine Pallet. Zip Code & City.
- 5C Fixture Mount 3" Head Diameter Lathe Tool Milling Machine Machinist Tools - Depth Of Cavity 1-1/8 Thick Flange. Heat Treated Tool Steel. Soft Head Type. Head Width Precisely Ground All Over.
- 1'' x 3" 5C Fixture Mounts Lathe Tooling Mill Machine Machinist tools - 3" 5C Fixture Mount. Weight: 3 Lbs. Quantity: 1. Precisely Ground All Over. Heat Treated Tool Steel. SoftHead For Easy Machining.
- 1'' x 4'' 5C Fixture Mount Lathe Face Plate Steel Lathing Metal Working 4Lbs - Lathe tool used in place of face plate fixtures. Head Length Unit Weight 4x 4 x 4-1/8 Estimated . Unit Dim L x W x H (in) Repeat accuracy. Quick mounting & Dismounting.
- Spi Wavy Parallel Set 4-1/4 Length 1/2 To 1-1/2 Loc7096 - WAVY PARALLEL SET. RANGE FROM 1/2 TO 1-1/2. LENGTH : 4-1/4. TO MAKE IT RIGHT AND YOU HAPPY. IF YOU HAVE A ISSUE OR NEED TO. US FIRST BEFORE YOU START A.
- Right Angle Fixture Plate - Precision Ground - 9 1/2"x9 1/2"x7 5/8" - Heavy Duty - This is a good condition very heavy duty. Including threaded hold-down holes in the base and face. The steel has oxidized. None of this effects the integrity of the item.
- T- Slot Table Fixture Plate 39.5" x 71.0" - 73100 Kimberly Clark Roar Rag-on-a-roll Dispenser.
- SGIH26-3 SGIH326 3mm Part Off Blade Grooving Cut Off Plate Tool holder CNC Lathe - Applying for turning and facing, is suitable for cutting fluid. Used on turning lathe machine. It can reduce the tool grinding cost and improve the cutting efficiency. Enhance the surface gloss of the cutting pieces.
- T-Slot Plate, Aluminum T-Track Metalworking Tooling Fixture 24"x16", USA Made! - 24" x 16" T-Slot Plate. Made in the USA! Our T-slot plates are produced from high strength, solid cast aluminum to provide you with a precision product.
- Item # 14318, Aluminum Fixture Plates 18" X 18" X 1/2" - This item is:________Item # 14318, Aluminum Fixture Plates 18" X 18" X 1/2"__________________________________________________________ This item is new, however, it may have scratches and marks from handling.
- Sacrificial fixture plate or mini pallet - 6" x 16" aluminum - Sacrificial fixture plate with 341 tapped holes (1/4" x 20tpi). Made from 6061 aluminum.
- Sacrificial aluminum T-slot plate, t-slotted fixture table - 8" x 16" x 1" - Sacrificial t-slotted fixture plate with 1/2 wide t-slots. Piece is slightly smaller than 8" x 16" x 1".
- Aluminum T-Slot Plate Fixture Plate 24"x16" Clamping, USA Made! - T-Slot plate ordered will include (6) aluminum 1/4"-20 threaded t-nuts. 24" x 16" T-Slot Plate. Made in the USA! Our T-slot plates are produced from high strength, solid cast aluminum to provide you with a precision product.
- Sacrificial aluminum T-slot plate, t-slotted fixture table - 8" x 12" x 1" - Sacrificial t-slotted fixture plate with 1/2 wide t-slots. Piece is slightly smaller than 8" x 12" x 1".
- 47" x 25.5" x 3.25" Steel Weld 5 T-Slot Table Cast iron Layout Plate Fixture - This table was not removed from the machine in a manner that would be conducive to re-installation. This item was removed from aWorking Machine, and is being. Condition: 3 -- Fair. Model #: NA. Weight: 587 Lbs.
- Sacrificial aluminum T-slot plate, t-slotted fixture table - 6" x 16" x 1" - Sacrificial t-slotted fixture plate with 1/2 wide t-slots. Piece is slightly smaller than 6" x 16" x 1".
- Sacrificial aluminum T-slot plate, t-slotted fixture table - 6" x 12" x 1" - Sacrificial t-slotted fixture plate with 1/2 wide t-slots. Piece is slightly smaller than 6" x 12" x 1".
- Sacrificial fixture plate or mini pallet - 8" x 10" aluminum - Sacrificial fixture plate with 285 tapped holes (1/4" x 20tpi). Made from 6061 aluminum.
- NEW Nexus Drill Fixture Plate, L R W, W/ Pads - Nexus Drill Fixture Plate. Fast Dispatch Service. Quality Products at Lowest Prices. We're down to earth, easy to work with people.
- Sacrificial fixture plate or mini pallet - 8" x 8" alum - Sacrificial fixture plate with 225 tapped holes (1/4" x 20tpi). Made from 6061 aluminum.
- set of aluminum guides for sacrificial fixture plate - 2 pcs - Set of aluminum guides - 2 pcs. Slots are just over 1/4" wide for 1/4" hardware and 1 3/8" long. Hardware is not included.
- Seiko Giken FC 12 Position Polishing Fixture plate Jig Puck Domaille Fiber Optic
- Smw Rotary Indexer Fixture Plate_Et-200V_Et200V_0412.9789 - It is a SMW, ROTARY INDEXER, FIXTURE PLATE. This item was removed from an OKUMA, VERTICAL MACHINING CENTER. We have no way of testing it once it was removed. Weight 514 Lbs. It is being sold in good condition unless otherwise stated.
- Sacrificial fixture plate or mini pallet - 6" x 10" aluminum - Sacrificial fixture plate with 209 tapped holes (1/4" x 20tpi). Made from 6061 aluminum.
- Sacrificial aluminum T-slot plate, t-slotted fixture table - 6" x 8" x 1" - Sacrificial t-slotted fixture plate with 1/2 wide t-slots.
- Sacrificial fixture plate or mini pallet - 6" x 6" aluminum - Sacrificial fixture plate with 121 tapped holes (1/4" x 20tpi). Made from 6061 aluminum.
- Hardinge Fixture Plate C25D (Inv.25465) - Hardinge Fixture Plate C25D. (Inv.25465).
- 157" x 28"x 8" Steel Welding T-Slot Table Cast Iron Layout Plate Fixture 5 SLOT - The item is a 5 Slot, T-Slotted Table. Our internal inventory number on this product is :JS# FLOOR #3 05-05-17. This item was removed from aWorking Machine, and is being. Model #: N/A. They do not allow us to look at your rates that you are getting with them.
- T-Slot Plate, Aluminum T-Track Metalworking Fixture Plate 20"x16", USA Made! - 20" x 16" T-Slot Plate. Made in the USA! Our T-slot plates are produced from high strength, solid cast aluminum to provide you with a precision product.
- Sacrificial aluminum T-slot plate, t-slotted fixture table - 4" x 8" x 1" - Sacrificial t-slotted fixture plate with 1/2 wide t-slots.
- 35.375" x 16.125" x 5" Steel Weld T-Slot Table Cast iron Layout Plate Fixture - (This item was removed from aWorking Machine, and is being. Condition: 3 -- Fair. Model #: N/A. Weight: 430 Lbs. sold in good condition unless otherwise stated! 5) Like New Condition.
- T-Slot Plate, Aluminum T-track Metalworking, Fixture Plate 28"x16", USA Made! - 28" x 16" T-Slot Plate. Made in the USA! Our T-slot plates are produced from high strength, solid cast aluminum to provide you with a precision product.
- 63" x 19.5" x 7.5" Steel T-Slotted Table Cast Iron Layout Fixture Plate Weld - This item was removed from aWorking Machine, and is being sold in good condition unless otherwise stated! Condition: 3 -- Fair. Model #: N/A. They do not allow us to look at your rates that you are getting with them.
- Domaille Sagitta PF-MT8-26 MTA Gemini CX 26 Position MT Polishing Fixture - Part # is PF-MT8-26. This fixture is used with Sagittas's Gemini CX Polishing Machines. Q's-eight for seven two one seven five five for six.
- Paravis Industries 4000049275 D2 Fixture Plate - 08 4000049275 21D.