100
NEW Sandvik Coromant - A393.CF-12 04 40 DRILL Collet for hydraulic
$195.00 Buy It Now or Best Offer
Engraving Router Conversion Set 1/2 1/4 1/8 3.175 4 6 6.35 12.7 Precision
$8.03 Buy It Now
Portable Engraving Bit Router Conversion Set1/2 1/4 1/8 3.175 4 6 6.35 12.7
$9.03 Buy It Now
Sandvik 393.CG-12 06 40 Hydraulic Chuck Sleeve Collet 6mm x 12mm$34.95 Buy It Now
Sandvik 3/8" ER20 Collet A393.15-20 3/8$37.95 Buy It Now or Best Offer
Sandvik 393.CGS-12 04 40 Hydraulic Chuck Sleeve Collet 4mm x 12mm$34.95 Buy It Now
(2) Sandvik 393.CG-20 11.7 50 Hydraulic Chuck Sleeve Collet 11.7mm x 20mm$69.95 Buy It Now or Best Offer
1 watcherOriginal South Bend 6K Brass Collet Bakelite Container Lot 14
$319.99 Buy It Now or Best Offer
1 watcherOriginal South Bend 6K Brass Collet Bakelite Container Lot 7
$159.99 Buy It Now or Best Offer
Hougen 12421 21MM X 50MM "12,000-Series" Annular Cutter
$69.99 Buy It Now
12mm x 20 O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve HK20-12 20-12
$95.00 Buy It Now or Best Offer
2 watchersVintage South Bend brass 15/16" 5C lathe collet in bakelite container
$9.99 Buy It Now or Best Offer
South Bend Collet #2 No. 2 Collet RSB 3/16$13.50 Buy It Now
South Bend Collet #2 No. 2 Collet RSB 7/16$13.50 Buy It Now
South Bend Collet #2 No. 2 Collet RSB 1/4$13.50 Buy It Now
Sandvik CG20 3/16" I.D. 20mm O.D. Collet Sleeve HydroGrip Hydraulic Chuck 0.1875
$33.99$32.29 Buy It Now or Best Offer
Sandvik CG20 3/16" I.D. 20mm O.D. Collet Sleeve HydroGrip Hydraulic Chuck 0.1875
$34.99$33.24 Buy It Now or Best Offer
Sandvik CG20 3/16" I.D. 20mm O.D. Collet Sleeve HydroGrip Hydraulic Chuck 0.1875
$34.99$33.24 Buy It Now or Best Offer
Sandvik CGS 3/16" I.D. 20mm O.D. Collet Sleeve HydroGrip Hydraulic Chuck 0.1875
$33.99$32.29 Buy It Now or Best Offer
Sandvik CGS 3/16" I.D. 20mm O.D. Collet Sleeve HydroGrip Hydraulic Chuck 0.1875
$34.99$33.24 Buy It Now or Best Offer
South Bend Collet #2 No. 2 Collet RSB 5/8$13.50 Buy It Now
South Bend Collet #2 No. 2 Collet RSB 11/16$13.50 Buy It Now
South Bend Collet #2 No. 2 Collet RSB 1/8$13.50 Buy It Now
South Bend Collet #2 No. 2 Collet RSB 3/8$13.50 Buy It Now
South Bend Collet #2 No. 2 Collet RSB 9/16$13.50 Buy It Now
South Bend Collet #2 No. 2 Collet RSB 5/16$13.50 Buy It Now
South Bend Collet #2 No. 2 Collet RSB 1/16$13.50 Buy It Now
South Bend Collet #2 No. 2 Collet RSB 1/2$13.50 Buy It Now
1/2" I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet Sleeve
$70.00 Buy It Now or Best Offer
20mm or 20D Sleeve Guide Bushing or Collet Tray Rack Holder Bar Loader SMC #FX
$27.95 Buy It Now
Sandvik Coromant EF-A16-A10 Sealed Hydraulic Chuck Sleeve 5/8" ID x 1" OD
$125.00 Buy It Now
5 sets Hardinge B20 Master Feed Finger Pads 1 3/16"
$15.00 Buy It Now
4 sets Hardinge B26 Master Feed Finger Pads 2 1/4" used with bolt in soft pads
$15.00 Buy It Now
HYC Reduction Sleeve For Hydraulic Chuck 3/8" 12220T 625308$115.12$46.05 Buy It Now or Best Offer
9 watchersOriginal South Bend 1/8 Brass Square Collet 3 3C w/ Bakelite Container Excellent
$38.99 Buy It Now or Best Offer
South Bend 1A collet lot
$70.00 Buy It Now or Best Offer
Kaiser Reduction Sleeve EWN 112 5/8" - 10mm 10.613.510 (Stk67)
$75.00 Buy It Now or Best Offer
Hardinge S-26 Round Smooth Collet Pads, Choose Your Sizes
$29.95 Buy It Now
Alexander A3 Collets 5/16 1/8 5/16 5/64 with Collet Sleeve Nose 25/32-15/16 LOT2
$29.99 0 Bids 3d 0h
Hardinge 1A HEX Collet 1/4" with Logan 7/8 - 15/16" Taper Collet Nose LOT # 10
$29.99 0 Bids 3d 0h
Kaiser Reduction Sleeve EWN 112 5/8" - 14mm 10.613.514 (Stk57)
$75.00 Buy It Now or Best Offer
25mm or 25D Sleeve or Collet Tray Rack Holder Organizer Bar Loader #FX
$27.95 Buy It Now
Mcr Safety Vp9318d10t Sleeve W/Thumb Slot,18",10 Gauge,Vend
$11.00$10.45 Buy It Now
Kaiser Reduction Sleeve EWN 112 5/8" - 12mm 10.613.512 (Stk74)
$75.00 Buy It Now or Best Offer
1 watcherSouth Bend Round Collets #3 RSB - 8 in the lot. Includes adapter. See details
$150.00 Buy It Now or Best Offer
Sleeve 1/2*38 Metric Standard 6P Pneumatic Sleeve 60520006~60520023
$30.00 Buy It Now
32mm Sleeve Collet PG32 PowRgrip 32DL GZB-S Schunk Tote Tray Rack Holder #GP
$28.95 Buy It Now
1 watcherSouth Bend Logan 15/16" - 7/8" taper 1A 3C Collet Sleeve Nose LOT # 11
$34.99 0 Bids 3d 0h
New 393.CGS-20 18 52 SANDVIK 18mm x 20mm Sealing Collet Sleeve Hydraulic Chuck
$49.99 Buy It Now or Best Offer
Erickson 100TG0375 Collet 3/8"
$11.00 Buy It Now or Best Offer
1 watcherKennametal Erickson 4mm ID x 12MM OD Hydraulic Chuck Sleeve Collet 12MHC040M
$25.00 Buy It Now or Best Offer
Kennametal Hydraulic CNC Reduction Reducing Collet Sleeve 1" - 3/4" (Stk67)
$30.00 Buy It Now
3 watchers Sandvik A393.CGS-32 06 60 Cylindrical Sleeve 3/8" x 32mm Hydraulic Chuck Collet$69.95 Buy It Now or Best Offer
Lot of Double Taper Collet Holders and Collets
$350.00 Buy It Now or Best Offer
PRO-SAFE Size Universal, Brown Leather Flame Retardant (with Adjustable Bicep...
$13.00 Buy It Now
Sandvik Coromant 393.CG-12 10 40 Cylindrical Collet for Hydraulic Membrane Chuck
$55.00 Buy It Now or Best Offer
Erickson 75Hc140M Hydraulic Chuck Sleeve
$140.00 Buy It Now or Best Offer
South Bend Round Collet 9/32” #2 RSB
$15.00 Buy It Now or Best Offer
1 watcherSouth Bend Round Collet 3/8” #2 RSB
$15.00 Buy It Now or Best Offer
South Bend Round Collet 7/16” #2 RSB
$15.00 Buy It Now or Best Offer
South Bend Round Collet 1/2” #2 RSB
$15.00 Buy It Now or Best Offer
2 watchersSouth Bend Round Collet 9/16” #2 RSB
$15.00 Buy It Now or Best Offer
South Bend Round Collet 3/16” #2 RSB
$15.00 Buy It Now or Best Offer
South Bend Round Collet 1/16” #2 RSB
$15.00 Buy It Now or Best Offer
South Bend Round Collet 1/8” #2 RSB
$15.00 Buy It Now or Best Offer
South Bend Round Collet 5/8” #2 RSB
$15.00 Buy It Now or Best Offer
South Bend Round Collet 13/32” #2 RSB
$15.00 Buy It Now or Best Offer
1 watcherSouth Bend Round Collet 11/16” #2 RSB
$15.00 Buy It Now or Best Offer
2 watchersSouth Bend Round Collet 5/8” #2 RSB
$21.98 Buy It Now or Best Offer
Collet Sleeve Ø1-1/4" x 4-1/2" Overall Length For ER20 Collet
$25.00 Buy It Now or Best Offer
1 watcherCollet Sleeve Ø25mm x 2-3/8" Overall Length For ER16 Collet
$29.00 Buy It Now or Best Offer
Collet Sleeve Ø 25mm x 4" Overall Length For ER20 Collet
$29.00 Buy It Now or Best Offer
1 watcherCollet Sleeve Ø25mm Double Ended ER16 For Swiss Machines 3-3/4" overall length
$32.00 Buy It Now or Best Offer
Sandvik Coromant A393 09-c 8-0656
$45.00 Buy It Now or Best Offer
2 watchers HUGE LOT OVER 140 Assorted Variety Collet Collets Machinist Tools$143.99 Buy It Now
2 watchers HUGE LOT OVER 115 Assorted Variety Collet Collets Machinist Tools$112.49 Buy It Now
1 watcherRivett Collet - 40S - 3/16"
$15.00 Buy It Now
2 watchersKennametal Erickson 12SMC200M Hydraulic Chuck Sleeve 20mm ID x 1.25" OD
$29.95 Buy It Now
HUGE LOT OVER 145 Assorted Variety Collet Collets Machinist Tools w/ Wood Holder$134.99 Buy It Now
2 watchers HUGE LOT OVER 160 Assorted Variety Collet Collets Machinist Tools w/ Wood Holder$143.99 Buy It Now
HUGE LOT OVER 90 Assorted Variety Collet Collets Machinist Tools w/ Wood Holder$89.99 Buy It Now
1 watcher HUGE LOT OVER 116 Assorted Variety Collet Collets Machinist Tools w/ Wood Holder$112.49 Buy It Now
HUGE LOT Over 35 Pieces Assorted Variety Hardinge Collet Pads NOS$67.49 Buy It Now
1/2" 1/4" 1/8" Collet Adaptor Shank Reducer Bit CNC Spindle Router 3/4/6/8/10mm
$9.59 Buy It Now
Hex Magnetic Power Socket 80mm Length Adapter Drill Bit Nut Driver Set 1/4'' Hex
$9.99 Buy It Now
CGS-32 SANDVIK (DCON) 32mm x 18mm (BD) 36mm Hydraulic Chuck Collet, (BN137)
$38.99 Buy It Now or Best Offer
5 watchersHARDINGE #300 Expanding Collet 1-17/64" Round 18370019012656 NIB
$99.00$89.10 Buy It Now or Best Offer
6 watchersHARDINGE #300 Expanding Collet 1-9/64" Round 18370019011406
$99.00$75.00 Buy It Now or Best Offer
Kennametal Erickson 4mm ID x 1/2" OD Hydraulic Chuck Sleeve Collet 50HC040M
$59.95 Buy It Now or Best Offer
Kennametal Erickson 4mm ID x 12mm OD Hydraulic Chuck Sleeve Collet 12MHC040M
$59.95 Buy It Now or Best Offer
80M28 Sleeve Wear for Gardner Denver Compressor 2605694150 711632E1-80M28
$99.00 Buy It Now or Best Offer
1 watcherVintage KAL Industries Adjustable Collet 3-1/2'' OAL x 3'' W
$69.99 Buy It Now or Best Offer
3 watchersLogan, Atlas, South Bend lathe 3C Collet Spindle Nose Protector Sleeve Adaptor
$225.00 Buy It Now
Memphis 39418 Sleeve New In Box
$11.58 Buy It Now or Best Offer
Lot of 6 Collet Pads
$19.00 Buy It Now or Best Offer
Sandvik 393.CGS-12 08 40
$113.00 Buy It Now or Best Offer
Sandvik Cylinderical Sleeve393.CGS-32 25 60
$150.00 Buy It Now or Best Offer
Sandvik A393.CGS-32 16 60 Cylindrical Sleeve
$145.00 Buy It Now or Best Offer
SCM Reduction Sleeve 9020. 1-1/4.1 EDP 15307A
$12.99 Buy It Now or Best Offer
2 watchers0206520 32-1/2” SCHUNK ER32 1/2" Internal Coolant Collet Closed Collar (BN138)
$49.99 Buy It Now or Best Offer
- Collet Sleeve with Coolant Through for Star or Tsugami 22mm shank - Star / Tsugami coolant fed collet sleeve ER16 with 22mm shank 1-1/4" long, collet protrusion 3/4" long.
- 393.CG-32 16 60 SANDVIK 16mm x 32mm Collet Sleeve for Hydraulic Chucks, (BN137) - Coolant pressure (CP) 80 bar. Body length (LB) 4 mm. Overall length (OAL) 64 mm. Functional length (LF) 4 mm.
- 393.CGS-20 06 52 SANDVIK 6mm x 20mm Collet Sleeve Sealing Hydraulic Chucks BN133 - Coolant pressure (CP) 80 bar. Body length (LB) 4 mm. Coolant entry style code (CNSC) 1: axial concentric entry. Overall length (OAL) 54 mm. Functional length (LF) 4 mm.
- 393.CGS-20 03 52 SANDVIK 3mm x 20mm Collet Sleeve Sealing Hydraulic Chucks BN133 - Coolant pressure (CP) 80 bar. Clamping length (LSC) 28 mm. Coolant entry style code (CNSC) 1: axial concentric entry. Overall length (OAL) 54 mm. Functional length (LF) 4 mm.
- 393.CGS-32 20 60 SANDVIK 20mm x 32mm Collet Sleeve for Sealing Chucks (BN137) - Coolant pressure (CP) 80 bar. Clamping length (LSC) 50 mm. Overall length (OAL) 64 mm. Functional length (LF) 4 mm.
- 393.CGS-20 14 52 SANDVIK 14mmx20mm Collet Sleeve Sealed Hydraulic Chucks (BN134) - Coolant pressure (CP) 80 bar. Body length (LB) 4 mm. Coolant entry style code (CNSC) 1: axial concentric entry. Overall length (OAL) 54 mm. Functional length (LF) 4 mm.
- Sandvik 18Mm Hydraulic Chuck Collet 393.Cgs-32 18 60 Loc10704 - MODEL NUMBER; 393.CGS-32 18 60. TO MAKE IT RIGHT AND YOU HAPPY. SO WE HAVE A CHANCE.
- Hex Magnetic Power 8mm 5/16 Socket Adapter Drill Bit Nut Driver Set 1/4 inch Hex - Product Name : Hex Driver Bit; Material : Chrome-Vanadium Hex Socket Size : 8mm/ 5/16"; Hex Shank Size : 6.35mm/ 1/4" Overall Size : 12 x 41mm/ 0.47 x 1.6" (DL); Color : Gray Weight : 167g Package : 10 x Hex Driver Bits.
- 393.CGS-32 18 60 SANDVIK 32mm x 18mm Hydraulic Chuck Collet True Seal (BN137) - Coolant pressure (CP) 80 bar. Body half taper angle (BHTA) 0 deg. Body length (LB) 4 mm. Overall length (OAL) 64 mm.
- Sandvik 393.CHS-32 25 60 Cylinderical Sleeve - Sandvik 393.CHS-32 25 60 Cylinderical Sleeve. Condition is "New". Shipped with UPS Ground.
- 393. CSG 12 06 40 SANDVIK 12mm OD, 6mm ID Collet Sealed Hydraulic Chuck (BN133) - CSG12 06 40 SANDVIK 12mm OD, 6mm ID Collet Sleeve for Sealed Hydraulic Chuck. Coolant pressure (CP) 80 bar. Weight of item (WT) 0.035 kg. Body half taper angle (BHTA) 0 deg. Body length (LB) 4 mm. Coolant entry style code (CNSC) 1: axial concentric entry.
- 393.CG-25 10 56 Sandvik 10mm ID 25mm OD 30mm Head Dia, Sealed Chuck Sleeve BN135
- 393.CGS-20 08 52 Sandvik 8mm ID 20mm OD 25mm Head Diam Sealed Chuck Sleeve BN134
- 393.CGS-32 24.7 60 SANDVIK 32mm x 24.760 Sealed Hydraulic Chuck Sleeve (BN137)
- 393.CGS-32 12 60 Sandvik 12mm ID 32mm OD 36mm Head Sealed Chuck Sleeve (BN134)
- SCHUNK 0224445 GZB-S 1/4" Intermediate Sleeve, 60.5 mm OL, 32 mm - New Price! - And both can be used in the SCHUNK toolholder systems TENDO, TRIBOS, SINO-R, and all standard hydraulic expansion toolholders. Part Number.
- Hardinge Collet Pad 15/16" - See photos.
- NEW #2 MORSE TAPER COLLETS lots of SIZES YOU PICK Round MT 2 ROYAL BRIDGEPORT - Hope this makes sense. The collets are all in good shape not sprung or anything like that. I only have 12 pictures. I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now.
- Sandvik Easyfix reduction sleeve 40 mm OD and 12 mm ID - Used sandvik easy fix collet, like new.
- Sandvik Easyfix reduction sleeve 40mm OD and 16mm ID - Used sandvik easy fix collet, like new.
- Sandvik Easyfix reduction sleeve 40 mm OD and 20 mm ID - Used sandvik easy fix collet, like new.
- Sandvik Easyfix reduction sleeve 40mm OD and 25mm ID - Used sandvik easy fix collet, like new.
- Sandvik 393. CGS-32 18 60 18mm ID Hydrogrip chuck 32mm OD sleeve (@D3)
- 199358 199358X Spline Coupling Sleeve M11/QSM11
- 3C COLLETS lots of sizes YOU PICK Round 3 C south bend hardinge rivett buck - RIVETT (Picture 8). Hope it makes sense?. I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. BUCK (Picture 4).
- CONSTANCE MACHINE 2.5-S, 5C STEEL EXTERNAL OVERSIZE COLLET 2-1/2"x1" W/PIN
- CONSTANCE MACHINE 2.5ET-A OVERSIZE EXTERNAL COLLET ALUMINUM 2-1/2"x1-1/2" W/PIN
- JFK CO C-112 OVER SIZE COLLET 1-1/2" DIAMETER x 1-1/4" HEAD W/ 1/4" PIN
- CONSTANCE MACHINE 2.5ET-S STEEL OVERSIZE EXTERNAL COLLET 5C 2.5"x1-1/2" - May be used in any application where a 5C collet can be used. Adapter broached for 3/8″ Allen wren, large end, to facilitate head removal.
- CONSTANCE MACHINE Steel EXT 5C STEEL EXTERNAL COLLET ADAPTER MADE IN USA
- CONSTANCE MACHINE STEEL 5C EXTERNAL COLLET ADAPTER TAP 7/8" THREAD x 3/8" HEX
- CONSTANCE MACHINE ML25 INTERNAL EXPANDING COLLET 2-1/2"x1-3/4" 5c MADE IN USA - Collet will not push out or pull in. Permits parts changing without stopping machine.
- cnc tool holder End Mills Reduction Sleeve DIN 1835 BD= 20mm Ø 12mm B+E 15/32 14 - 0.0-0.5 KG MAX 12 USD / 0.5-1.0 KG MAX 17 USD / 1.0-2.0 KG MAX 24 USD /. CONDITION USED.
- cnc tool holder End Mills Reduction Sleeve DIN 1835 BD= 20mm Ø 7mm B+E No2 - 0.0-0.5 KG MAX 12 USD / 0.5-1.0 KG MAX 17 USD / 1.0-2.0 KG MAX 24 USD /. CONDITION USED.
- cnc tool holder End Mills Reduction Sleeve DIN 1835 BD= 20mm Ø 10mm B+E No1 - 0.0-0.5 KG MAX 12 USD / 0.5-1.0 KG MAX 17 USD / 1.0-2.0 KG MAX 24 USD /. CONDITION USED.
- cnc tool holder End Mills Reduction Sleeve DIN 1835 BD= 20mm Ø 12mm B+E No12 - 0.0-0.5 KG MAX 12 USD / 0.5-1.0 KG MAX 17 USD / 1.0-2.0 KG MAX 24 USD /. CONDITION USED.
- cnc tool holder End Mills Reduction Sleeve DIN 1835 BD= 20mm Ø 12mm B+E No13 - 0.0-0.5 KG MAX 12 USD / 0.5-1.0 KG MAX 17 USD / 1.0-2.0 KG MAX 24 USD /. CONDITION USED.
- cnc tool holder End Mills Reduction Sleeve DIN 1835 BD= 20mm Ø 12mm B+E No10 - 0.0-0.5 KG MAX 12 USD / 0.5-1.0 KG MAX 17 USD / 1.0-2.0 KG MAX 24 USD /. CONDITION USED.
- 3C collet EXPANDING MANDREL Round south bend hardinge rivett lathe mill drill - Not sure of its application. maybe hardinge a lot of them like this were but not marked in any way. I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now.
- SMALL 3C collet 3/16 ARBOR 3 C south bend rivett lathe mill slitting saw harding - I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. ding or mark on everything. If I can not then I must take pictures of everything.
- 3C collet GRINDING ARBOR south bend rivett lathe milling slitting saw hardinge - Anyway it is solid and a great size. I am sure spaces would not be hard to make if you need different ones. The TPI is 1/4 28 I think it will need a tap run down it. I think it make a great grinding arbor?.
- cnc tool holder End Mills Reduction Sleeve DIN 1835 BD= 20mm Ø 6mm B+E No8 - 0.0-0.5 KG MAX 12 USD / 0.5-1.0 KG MAX 17 USD / 1.0-2.0 KG MAX 24 USD /. CONDITION USED.
- cnc tool holder End Mills Reduction Sleeve DIN 1835 BD= 20mm Ø 6mm B+E No19 - 0.0-0.5 KG MAX 12 USD / 0.5-1.0 KG MAX 17 USD / 1.0-2.0 KG MAX 24 USD /. CONDITION USED.
- cnc tool holder End Mills Reduction Sleeve DIN 1835 BD= 20mm Ø 10mm B+E No6 - 0.0-0.5 KG MAX 12 USD / 0.5-1.0 KG MAX 17 USD / 1.0-2.0 KG MAX 24 USD /. CONDITION USED.
- cnc tool holder End Mills Reduction Sleeve DIN 1835 BD= 20mm Ø 12mm B+E 25/32 i - 0.0-0.5 KG MAX 12 USD / 0.5-1.0 KG MAX 17 USD / 1.0-2.0 KG MAX 24 USD /. CONDITION USED.
- cnc tool holder End Mills Reduction Sleeve DIN 1835 BD= 20mm Ø 4mm B+E 25/32 i - 0.0-0.5 KG MAX 12 USD / 0.5-1.0 KG MAX 17 USD / 1.0-2.0 KG MAX 24 USD /. CONDITION USED.
- cnc tool holder End Mills Reduction Sleeve DIN 1835 BD= 20mm Ø 10mm B+E 25/32 i - 0.0-0.5 KG MAX 12 USD / 0.5-1.0 KG MAX 17 USD / 1.0-2.0 KG MAX 24 USD /. CONDITION USED.
- cnc tool holder End Mills Reduction Sleeve DIN 1835 BD= 20mm Ø 6mm B+E 25/32 in - 0.0-0.5 KG MAX 12 USD / 0.5-1.0 KG MAX 17 USD / 1.0-2.0 KG MAX 24 USD /. CONDITION USED.
- tool holder End Mills Reduction Sleeve DIN 1835 BD= 20mm Ø 7mm B+E 25/32 in - 0.0-0.5 KG MAX 12 USD / 0.5-1.0 KG MAX 17 USD / 1.0-2.0 KG MAX 24 USD /. CONDITION USED.
- STRANGE 3C collet Round 3 C south bend hardinge rivett lathe mill drill 3/16 - I am not cleaning anything any more. All this stuff has been sitting on my garage since my dad got sick I am guessing 11 years or more now. ding or mark on everything. If I can not then I must take pictures of everything.
- SCHUNK 0204210 SDF GZB-S D=1-1/4" x 7/8" ID Tendo Closed Front Sleeve Collet - P/N: 0204210. 1 new SCHUNK. Tendo Closed Front Sleeve Collet. PAW Industrial is a liquidator for industrial supplies. Raw Materials. Power & Pneumatic Tools. Janitorial, Cleaners & Lubricants. D=1-1/4" O.D. / D=7/8" I.D. / 60.5mm Long.
- Sandvik 3/16" Collet Sleeve HydroGrip Hydraulic Chuck. A393.CGS-20 03 52 - Sandvik 3/16" Collet Sleeve HydroGrip Hydraulic Chuck. A393.CGS-20 03 52.
- Kennametal Hydraulic Collet Chuck#1547444R01 A1-8 Mount W/110Mm I.d Collet - A1-8 MOUNT W/110MM ID COLLET.
- Lyndex Hydraulic Reducing Collet Sleeve 2" - 1.5" (Stk50) - (Stk50) Lyndex Hydraulic Reducing Collet Sleeve 2" - 1.5".
- Hydraulic Reducing Collet Sleeve 1.25" - 1" (Stk5) - (Stk5) Hydraulic Reducing Collet Sleeve 1.25" - 1".
- Sandvik Coromant Slotted Hyd Chuck Sleeve 9/16" ID A393.CGS-250956 - Sandvik Coromant Slotted Hyd Chuck Sleeve 9/16" ID A393.CGS-250956. Condition is "New". Free shipping. (C)
- Lovejoy /SIER BATH-C7/8 00042 SLEEVE - Title: Lovejoy /SIER BATH-C7/8 00042 SLEEVE. Model: 00042. MPN: 00042. We're down to earth, easy to work with people.
- Morrison collet (13/16")
- Hardinge collet 140K (1/2")
- NIB Sandvik Coromant 393.CGS-32 18 60 18mm Cylindrical Collet - Body half taper angle(BHTA). Body length(LB). Overall length(OAL). Functional length(LF). Clamping length(LSC).
- Collet sleeve 1-1/4" o.d. 3/4" i.d. for cnc lathe straight - Collet sleeve 1-1/4" o.d. 3/4"id. for cnc lathe - SOLD AS IS. LOOK AT PICTURES CAREFULLY.Have other sizes and styles available.
- FESTO VMPAC-ZAH-46 Sleeve New # - New Arrival. The item in the actual use of the process of quality problems.
- New Sandvik Coromant 393.CF-20 08 50 8mm Slotted Hydraulic Chuck Sleeve - Body half taper angle (BHTA)0 deg.
- Sandvik Coromant Sealed Hydraulic Chuck Sleeve 5/8" ID x 1" OD EF-A16-A10 - Sandvik Coromant. Style Sealed. Vivian July 28 2020. Item is in excellent condition. SOLD AS IS. Material Steel.
- #2 Morse Taper Collets Lot Of 22 Loc8543 - SHANK SIZE; #2 MORSE TAPER. US FIRST BEFORE YOU START A. TO MAKE IT RIGHT AND YOU HAPPY. 5/16, 11/32, 23/64, 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 31/64. SO WE HAVE A CHANCE.
- #2 Morse Taper Letter Drill Collets Lot Of 48 Loc8541 - SHANK SIZE; #2 MORSE TAPER. US FIRST BEFORE YOU START A. TO MAKE IT RIGHT AND YOU HAPPY. 1 13 4 2 15 2 4 1 2 4. SO WE HAVE A CHANCE.
- #2 Morse Taper Letter Drill Collets Lot Of 15 Loc8540 - SHANK SIZE; #2 MORSE TAPER. US FIRST BEFORE YOU START A. TO MAKE IT RIGHT AND YOU HAPPY. SIZES; R, F, R, B, W, Y, C, H, D, Q, N, Z, U, S, A.
- #2 Morse Taper Center Drill Collets Ctr 6-16 Loc8539 - SHANK SIZE; #2 MORSE TAPER. US FIRST BEFORE YOU START A. IF YOU HAVE A ISSUE OR NEED TO. TO MAKE IT RIGHT AND YOU HAPPY. SIZES; 6-16.
- #2 Morse Taper Metric Drill Collets Lot Of 26 Loc8534 - SHANK SIZE; #2 MORSE TAPER. US FIRST BEFORE YOU START A. SIZES; 9, 13, 14, 10, 12, 12.5, 8.5, 11, 8.8MM. SO WE HAVE A CHANCE. TO MAKE IT RIGHT AND YOU HAPPY. 2 2 2 9 2 3 5 1 1.
- #2 Morse Taper Number Drill Collets Lot Of 5 Loc8532 - SHANK SIZE; #2 MORSE TAPER. US FIRST BEFORE YOU START A. IF YOU HAVE A ISSUE OR NEED TO. TO MAKE IT RIGHT AND YOU HAPPY. SO WE HAVE A CHANCE.
- #2 Morse Taper Tapping Collets Lot Of 2 Loc8531 - SHANK SIZE; #2 MORSE TAPER. US FIRST BEFORE YOU START A. TO MAKE IT RIGHT AND YOU HAPPY. SO WE HAVE A CHANCE.
- #2 Morse Taper Tapping Collets Lot Of 5 Loc8530 - SHANK SIZE; #2 MORSE TAPER. SIZES; 1/4 TAP. US FIRST BEFORE YOU START A. TO MAKE IT RIGHT AND YOU HAPPY. SO WE HAVE A CHANCE.
- #2 Morse Taper Tapping Collets Lot Of 6 Loc8529 - SHANK SIZE; #2 MORSE TAPER. SIZES; 1/4 TAP. US FIRST BEFORE YOU START A. TO MAKE IT RIGHT AND YOU HAPPY. SO WE HAVE A CHANCE.
- #2 Morse Taper Collets Lot Of 49 Drill & Tap Collets Loc8524 - SHANK SIZE; #2 MORSE TAPER. US FIRST BEFORE YOU START A. TO MAKE IT RIGHT AND YOU HAPPY. 36/64, 31/64, 11/64 QTY2, 13/64 QTY 2, 7/32, 13/32, 21/64, Y, 11/32, C, 25/64, 11/32, 21/64, 17/64, R, 5/32, 3/8HT QTY2.
- 10mm I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/4" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - 3/4" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type). The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/4" I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/16" I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/16" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - 5/16" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type). The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/16" I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/16" I.D. x 12mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 4mm I.D. x 12mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/2" I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/4" I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 12mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 10mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3mm I.D. x 12mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/8" I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/4" I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 4mm I.D. x 12mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/16" I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 9mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/8" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 12mm I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/8" I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 4mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 14mm I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/4" I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/16" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open - 3/16" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type). The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 14mm I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/8" I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3mm I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 16mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/8" I.D. x 12mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 6mm I.D. x 12mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 6mm I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/4" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - 1/4" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type). The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/8" I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 6mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 12mm I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/16" I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 18mm I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/8" I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 12mm I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 15mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 16mm I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5mm I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 16mm I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/16" I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 4mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/16" I.D. x 1/2" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 20mm I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 8mm I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 18mm I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/2" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - 1/2" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type). The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 16mm I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/8" I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 8mm I.D. x 1/2" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/16" I.D. x 12mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/4" I.D. x 1/2" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/2" I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 7mm I.D. x 12mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 15mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/8" I.D. x 12mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3mm I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 12mm I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1" I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 8mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/8" I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 8mm I.D. x 12mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 14mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/8" I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/16" I.D. x 12mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/8" I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/2" I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 10mm I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/16" I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/8" I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/4" I.D. x 12mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/16" I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/8" I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/8" I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 7mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 8mm I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 9mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 14mm I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 20mm I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 13mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/4" I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/8" I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 8mm I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 8mm I.D. x 12mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/8" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - 5/8" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type). The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/4" I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/4" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 10mm I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 16mm I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 6mm I.D. x 1/2" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 4mm I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/16" I.D. x 1/2" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 11mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 6mm I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 7mm I.D. x 12mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 10mm I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 25mm I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 8mm I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/8" I.D. x 1/2" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5mm I.D. x 1/2" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 12mm I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/16" I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3mm I.D. x 1/2" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/2" I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/16" I.D. x 1/2" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/8" I.D. x 1/2" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 10mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 10mm I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/8" I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 25mm I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 16mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 14mm I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/16" I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 14mm I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 4mm I.D. x 1/2" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/16" I.D. x 1/2" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 11mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 13mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/8" I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/4" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 18mm I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 14mm I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 20mm I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 18mm I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/2" I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/2" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 8mm I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3mm I.D. x 1/2" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/8" I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5mm I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 25mm I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/8" I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/4" I.D. x 1/2" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 6mm I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 6mm I.D. x 12mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 6mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 8mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 4mm I.D. x 1/2" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 4mm I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/16" I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/16" I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/8" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/2" I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5mm I.D. x 12mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 7mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 10mm I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 6mm I.D. x 1/2" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 20mm I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 8mm I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/16" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open - 5/16" I.D. x 1-1/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type). The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/4" I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 3/16" I.D. x 12mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/4" I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 5/16" I.D. x 3/4" O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 14mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 12mm I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 12mm I.D. x 20mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Open Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- 1/8" I.D. x 32mm O.D. YG1 Hydraulic Chuck Collet (Reduction Sleeve: Closed Type) - The Use Of Reduction Sleeves Greatly Improves The Usefulness Of A Hydraulic Chuck. Reduction Sleeves Are Available In 6 Different O.D.S; 1/2", 3/4", 1-1/4", 12mm, 20mm & 32mm For Clamping Tool Shanks From 1/8" To 1" & 3mm To 25mm.
- Erickson 32.0 150TGC320M Lx-11J04 Collet New in Original package
- Sandvik Coromant Cylindrical Hydraulic Collet Sleeve 393.CGS-32 12 60
- ERI America 3/4"-8mm Hydraulic Collet Sleeve SC075-08 (LOC1219B) - Shank Capacity: 8mm. MPN: SC075-08.
- ERI America 3/4"-6mm Hydraulic Collet Sleeve SC075-06 (LOC1219B) - Shank Capacity: 6mm. MPN: SC075-06.
- ERI America 3/4"-10mm Hydraulic Collet Sleeve SC075-10 (LOC1219B) - Shank Capacity: 10mm. MPN: SC075-10.
- ERI America 3/4"-12mm Hydraulic Collet Sleeve SC075-12 (LOC1219B) - Shank Capacity: 12mm. MPN: SC075-12.
- ERI America 3/4"-14mm Hydraulic Collet Sleeve SC075-14 (LOC1219B) - Shank Capacity: 14mm. MPN: SC075-14.
- 3/4" Chuck Collet Reduction Sleeve 37Mm-Odx 70Mm-Oal - When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Warranty Information.
- 5/16" Chuck Collet Reduction Sleeve 37Mm-Odx 70Mm-Oal - When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Warranty Information.
- 5/8" Chuck Collet Reduction Sleeve 37Mm-Odx 70Mm-Oal - When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Warranty Information.
- 1/4" Chuck Collet Reduction Sleeve 37Mm-Odx 70Mm-Oal - When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Warranty Information.
- 3/16" Chuck Collet Reduction Sleeve 37Mm-Odx 70Mm-Oal - When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Warranty Information.
- 1" Chuck Collet Reduction Sleeve 1.45"Od X 2.75"Oal - When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Warranty Information.
- 20Mm Chuck Collet Reduction Sleeve 37Mm-Od X 70Mm-Oal - When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Warranty Information.
- 10Mm Chuck Collet Reduction Sleeve 37Mm-Od X 70Mm-Oal - When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Warranty Information.
- 25Mm Chuck Collet Reduction Sleeve 37Mm-Od X 70Mm-Oal - When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Warranty Information.
- 12Mm Chuck Collet Reduction Sleeve 37Mm-Od X 70Mm-Oal - When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Warranty Information.
- 6Mm Chuck Collet Reduction Sleeve 37Mm-Od X 70Mm-Oal - When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Warranty Information.
- 8Mm Chuck Collet Reduction Sleeve 37Mm-Od X 70Mm-Oal - When we receive the product we will confirm item is defective, has not been disassembled and our seal is intact. Warranty Information.
- Sandvik Coromant Cgs32 1" Collet Sleeve
- Lot 7 Used Machine Collets Tool Holders Sleeves Taper Erickson Free Shipping! - LOT OF 7 USED MACHINE COLLETS TOOL HOLDERS DRILL SLEEVES TAPER CHUCK ETC. Sold as-is pictured!