100
3" HD Steel Wood Lathe Face Plate 3/4" X 16TPI Threaded
$25.85 Buy It Now
3" HD Steel Wood Lathe Face Plate, 3/4" 16TPI Threaded
$26.91 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread-Spindle 1 8tpi To 3/4 10tpi
$31.66$27.23 Buy It Now or Best Offer
Lathe Dog Plate 5-1/2" Diameter 2-1/4-8TPI
$49.99 Buy It Now or Best Offer
Wood Lathe Chuck Adapter Screw Thread Spindle-Adapter For Wood Turning Lathe
$17.70$15.58 Buy It Now
Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe
$18.66$15.86 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread-Spindle 1 8tpi To 3/4 10tpi
$33.33$30.00 Buy It Now or Best Offer
Boost Your Wood Turning Capabilities with this Adapter Screw Thread Spindle
$18.66$16.23 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread Spindle 1 8tpi To 3/4 10tpi
$31.47$26.75 Buy It Now
Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe
$31.15$28.04 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread Spindle 1 8tpi To 3/4 10tpi
$31.66$28.49 Buy It Now or Best Offer
3" HD Steel Wood Lathe Face Plate, 3/4" X 16TPI Threaded
$25.70 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread Spindle 1 8tpi To 3/4 10tpi
$30.51$26.85 Buy It Now
1 X Wood Lathe Chuck Adapter Screw Thread Spindle For Turning Lathe Matel Black
$18.59 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread-Spindle 1 8tpi To 3/4 10tpi
$32.84$31.20 Buy It Now
Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe
$32.84$30.54 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread Spindle 1 8tpi To 3/4 10tpi
$32.84$28.90 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread-Spindle 1 8tpi To 3/4 10tpi
$32.84$29.88 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread-Spindle 1 8tpi To 3/4 10tpi
$31.74$28.57 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread Spindle 1 8tpi To 3/4 10tpi
$31.74$28.57 Buy It Now
Wood Turning Lathe Chuck Adapter Screw Thread Spindle 1 8tpi To 3/4 10tpi
$31.74$28.57 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread Spindle 1 8tpi To 3/4 10tpi
$32.50$29.90 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread-Spindle 1 8tpi To 3/4 10tpi
$32.84$28.90 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread Spindle 1 8tpi To 3/4 10tpi
$31.75$28.58 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread-Spindle 1 8tpi To 3/4 10tpi
$31.75$28.58 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread Spindle 1 8tpi To 3/4 10tpi
$32.39$25.92 Buy It Now or Best Offer
1 watcher3" HD Steel Wood Lathe Face Plate, 3/4" X 16TPI Threaded
$26.38 Buy It Now
Manual Lathe Chuck Self-Centering Plain Back 3" Diam X 3 Jaws K11-80(G)
$200.00$98.00 Buy It Now or Best Offer
Wood Turning Lathe Chuck-Adapter Screw Thread-Spindle 1 8tpi To 3/4 10tpi
$30.16$27.45 Buy It Now
2" Steel Wood Lathe Face Plate, 3/4" x 16tpi Threaded
$23.29 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread-Spindle 1 8tpi To 3/4 10tpi
$34.34$30.22 Buy It Now
1 watcherBison 8285-5” 1-1/2”-8 Threaded Lathe Chuck Backplate 5" 3-Hole 7-876-052B
$99.00 0 Bids 4d 11h
Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe
$33.63$27.58 Buy It Now or Best Offer
Wood Turning Lathe Chuck-Adapter Screw Thread-Spindle 1 8tpi To 3/4 10tpi
$33.63$28.92 Buy It Now or Best Offer
Wood Turning Lathe Chuck-Adapter Screw Thread-Spindle 1 8tpi To 3/4 10tpi
$32.39$29.15 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread-Spindle 1 8tpi To 3/4 10tpi
$32.62$30.01 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread-Spindle 1 8tpi To 3/4 10tpi
$31.62$27.82 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread-Spindle 1 8tpi To 3/4 10tpi
$31.62$27.82 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread-Spindle 1 8tpi To 3/4 10tpi
$31.62$23.71 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread-Spindle 1 8tpi To 3/4 10tpi
$31.62$27.82 Buy It Now
Wood Turning Lathe Chuck-Adapter Screw Thread-Spindle 1 8tpi To 3/4 10tpi
$31.62$26.88 Buy It Now
Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New
$31.95$29.07 Buy It Now or Best Offer
Wood Turning Lathe Chuck Adapter Screw Thread Spindle 1'' 8tpi To 3/4'' 10tpi
$31.95$28.12 Buy It Now or Best Offer
Wood Turning Lathe Chuck Adapter Screw Thread Spindle 1'' 8tpi To 3/4'' 10tpi
$31.95$27.16 Buy It Now or Best Offer
Wood Turning Lathe Chuck-Adapter Screw Thread Spindle 1'' 8tpi To 3/4'' 10tpi
$31.95$28.76 Buy It Now or Best Offer
Wood Turning Lathe Chuck-Adapter Screw Thread-Spindle 1'' 8tpi To 3/4'' 10tpi
$31.95 Buy It Now or Best Offer
Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe
$32.62$30.01 Buy It Now
Thread- Spindle Adapter 1pc-For Wood Turning Tools Wood Lathe Chuck Adapter
$32.62$30.01 Buy It Now
Brand New Wood Lathe Chuck Adapter High Quality Material Matel Reliable
$16.42$14.78 Buy It Now
Thread- Spindle Adapter 1pc-For Wood Turning Tools Wood Lathe Chuck Adapter
$31.94$28.43 Buy It Now or Best Offer
Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' For Wood Turning Tools
$33.29$28.30 Buy It Now
Wood Lathe Chuck Adapter Spindle Adapter For Wood Lathe Chuck Accessories
$33.29$29.30 Buy It Now or Best Offer
Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool
$31.29$28.16 Buy It Now
For Wood Lathe Chuck Wood Lathe Chuck Adapter Black Precision Hot Sale
$19.40$17.65 Buy It Now
Buck Chuck Adapter Back Plate for 10" Dia Self Centering Lathe Chuck D1-6 A10-D6
$700.00$343.00 Buy It Now or Best Offer
Heavy Duty Wood Lathe Chuck Adapter for 1/8'' to 3/4 10'' Thread Spindle
$33.29$29.63 Buy It Now or Best Offer
For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter
$33.29 Buy It Now
Achieve Smooth and Even Turned Pieces with this Wood Lathe Chuck Adapter
$19.01$16.73 Buy It Now
Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe
$19.01$16.73 Buy It Now
Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe
$33.63$30.60 Buy It Now or Best Offer
Thread- Spindle Adapter 1pc-For Wood Turning Tools Wood Lathe Chuck Adapter
$32.26$29.35 Buy It Now or Best Offer
Thread- Spindle Adapter 1pc-For Wood Turning Tools Wood Lathe Chuck Adapter
$31.94$27.47 Buy It Now
Brand New Chuck Adapter Wood Lathe Matel Screw Thread 1/8'' To 3/4-10''
$31.94$27.78 Buy It Now or Best Offer
Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool
$32.26$29.35 Buy It Now
Brand New Chuck Adapter Matel Screw Thread Silver Spindle Adapter 1 Pc
$35.93$32.34 Buy It Now
Silver Chuck Adapter for Wood Lathe with 1/8'' to 3/4 10'' Thread Spindle
$32.62$30.01 Buy It Now
Brand New Chuck Adapter Matel Screw Thread Silver 1/8'' To 3/4-10''
$32.62$30.99 Buy It Now
Brand New Chuck Adapter Screw Thread Spindle Adapter 1/8'' To 3/4-10''
$32.62$30.01 Buy It Now or Best Offer
Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe
$32.62$30.34 Buy It Now
Brand New Chuck Adapter Screw Thread Spindle Adapter 1/8'' To 3/4-10''
$32.62$27.73 Buy It Now
Heavy Duty Wood Lathe Chuck Adapter for 1/8'' to 3/4 10'' Thread Spindle
$30.64$28.19 Buy It Now
Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool
$30.64$28.80 Buy It Now
Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool
$30.64$28.49 Buy It Now
Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool
$30.65$28.81 Buy It Now
Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool
$30.64$28.80 Buy It Now
Thread- Spindle Adapter 1pc-For Wood Turning Tools Wood Lathe Chuck Adapter
$32.96$28.02 Buy It Now
Thread- Spindle Adapter 1pc-For Wood Turning Tools Wood Lathe Chuck Adapter
$32.96$28.02 Buy It Now
Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool
$32.96 Buy It Now
Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool
$32.96$29.33 Buy It Now or Best Offer
Heavy Duty Wood Lathe Chuck Adapter for 1/8'' to 3/4 10'' Thread Spindle
$32.96$29.00 Buy It Now
Brand New Chuck Adapter Wood Lathe Spindle Adapter 1/8'' To 3/4-10''
$33.63$27.24 Buy It Now or Best Offer
Heavy Duty Wood Lathe Chuck Adapter for 1/8'' to 3/4 10'' Thread Spindle
$31.62 Buy It Now or Best Offer
Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool
$31.62$27.19 Buy It Now
Silver Chuck Adapter for Wood Lathe with 1/8'' to 3/4 10'' Thread Spindle
$31.62$27.82 Buy It Now
Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New
$31.62$26.88 Buy It Now
For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter
$32.62$30.01 Buy It Now
For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter
$32.96$29.00 Buy It Now or Best Offer
Heavy Duty Wood Lathe Chuck Adapter for 1/8'' to 3/4 10'' Thread Spindle
$32.28$28.41 Buy It Now or Best Offer
Brand New Chuck Adapter Wood Lathe Spindle Adapter 1/8'' To 3/4-10''
$33.63$27.58 Buy It Now or Best Offer
Wood Lathe Chuck-Adapter Screw Thread Spindle-Adapter For Wood Turning-Lathe
$19.01$16.73 Buy It Now
Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool
$32.25$29.02 Buy It Now
Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool
$30.64$27.89 Buy It Now
Heavy Duty Wood Lathe Chuck Adapter for 1/8'' to 3/4 10'' Thread Spindle
$32.26$29.03 Buy It Now
Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool
$32.26$29.68 Buy It Now
Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool
$32.26$28.71 Buy It Now
Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe
$30.65$27.59 Buy It Now
Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool
$31.95$28.76 Buy It Now or Best Offer
Wood Lathe Chuck-Adapter Screw Thread Spindle-Adapter For Wood Turning-Lathe
$18.43$16.22 Buy It Now
BUCK CHUCK Adapter Back Plate for 12" Dia Lathe Chuck 7-7/8"OD D1-6 Mount B12-D6
$400.00$196.00 Buy It Now or Best Offer
Chuck Adapter Wood Lathe Screw Thread Spindle Adapter 1/8'' To 3/4-10''
$33.63$30.27 Buy It Now or Best Offer
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Thread- Spindle Adapter 1pc-For Wood Turning Tools Wood Lathe Chuck Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. Quantity: 1Pc. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Thread- Spindle Adapter 1pc-For Wood Turning Tools Wood Lathe Chuck Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. Quantity: 1Pc. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Thread- Spindle Adapter 1pc-For Wood Turning Tools Wood Lathe Chuck Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. Quantity: 1Pc. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool
- Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool
- Brand New Chuck Adapter Wood Lathe Spindle Adapter 1/8'' To 3/4-10''
- Thread- Spindle Adapter 1pc-For Wood Turning Tools Wood Lathe Chuck Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. Quantity: 1Pc. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Turning Tool Woodworking Lathe Adaptation Wood Lathe Machine Spindle Tool - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- 1X Wood Lathe Chuck-Adapter Screw Thread Spindle Adapter For Wood Turning-Lathe✅ - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- 1X Wood Lathe Chuck-Adapter Screw Thread Spindle Adapter For Wood Turning-Lathe✅ - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Silver Chuck Adapter for Wood Lathe with 1/8'' to 3/4 10'' Thread Spindle
- Brand New Chuck Adapter Screw Thread Spindle Adapter 1/8'' To 3/4-10'' - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Silver Chuck Adapter for Wood Lathe with 1/8'' to 3/4 10'' Thread Spindle
- Chuck Adapter Silver Spindle Adapter 1 Pc 1/8'' To 3/4-10'' Accessories - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. Color: Silver. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Brand New Chuck Adapter Matel Screw Thread Silver 1/8'' To 3/4-10'' - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. Color: Silver. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Brand New Chuck Adapter Wood Lathe Spindle Adapter 1/8'' To 3/4-10'' - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Silver Chuck Adapter for Wood Lathe with 1/8'' to 3/4 10'' Thread Spindle
- Silver Chuck Adapter for Wood Lathe with 1/8'' to 3/4 10'' Thread Spindle
- Chuck Adapter For Wood Turning Tools 1 Pc Screw Thread Spindle Adapter - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Silver Chuck Adapter for Wood Lathe with 1/8'' to 3/4 10'' Thread Spindle - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. Color: Silver. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- D1-5 Cam Lock 8" lathe back plate for Set Tru style chucks - D1-5 8" lathe back plate for Set Tru style chucks.
- Replaceable Wood Lathe Chuck Precision Thread Inner Diameter18mm Matel - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Heavy Duty Wood Lathe Chuck Adapter for 1/8'' to 3/4 10'' Thread Spindle
- Heavy Duty Wood Lathe Chuck Adapter for 1/8'' to 3/4 10'' Thread Spindle
- For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter
- Heavy Duty Wood Lathe Chuck Adapter for 1/8'' to 3/4 10'' Thread Spindle
- For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe
- Heavy Duty Wood Lathe Chuck Adapter for 1/8'' to 3/4 10'' Thread Spindle - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Silver Chuck Adapter for Wood Lathe with 1/8'' to 3/4 10'' Thread Spindle - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. Color: Silver. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Brand New Chuck Adapter Matel Screw Thread Silver Spindle Adapter 1 Pc
- For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter
- For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Heavy Duty Wood Lathe Chuck Adapter for 1/8'' to 3/4 10'' Thread Spindle - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter
- For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter
- For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter
- For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter
- For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter
- For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter
- For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- For-Wood-Turning-Lathe,Wood Lathe Chuck Adapter Screw Thread Spindle Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter For Wood Turning Tools Matel Screw Thread Spindle Adapter
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe
- Heavy Duty Wood Lathe Chuck Adapter for 1/8'' to 3/4 10'' Thread Spindle - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe
- For Wood Lathe Chuck Wood Lathe Chuck Adapter Black Precision Hot Sale - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. Color: Black. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Heavy Duty Wood Lathe Chuck Adapter for 1/8'' to 3/4 10'' Thread Spindle - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Silver Chuck Adapter for Wood Lathe with 1/8'' to 3/4 10'' Thread Spindle - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. Color: Silver. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- 7-875-168 (Adapter Plate 8245-16-8 for D1-8 Spindle, Used With 16" Set-Tru Chuck - Adapter Plates For Lathe Chuck - CAMLOCK. Mfr Part Number: 358245971200. Part number: 7-875-168.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Silver Chuck Adapter for Wood Lathe with 1/8'' to 3/4 10'' Thread Spindle
- For Wood Lathe Chuck Wood Lathe Chuck Adapter Black Precision Hot Sale - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. Color: Black. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Brand New Wood Lathe Chuck Adapter Black Precision For Wood Lathe Chuck - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. Color: Black. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe
- Chuck Adapter Silver Spindle Adapter 1/8'' To 3/4-10'' Accessories - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. Color: Silver. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Brand New Chuck Adapter Wood Lathe Spindle Adapter 1/8'' To 3/4-10'' - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter 1 Pc For Wood Lathe Chuck For Wood Turning Tools - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Brand New Chuck Adapter Matel Screw Thread Silver 1/8'' To 3/4-10''
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe
- Wood Lathe Chuck Adapter 1 Pc For Wood Lathe Chuck Screw Thread Spindle Adapter
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe
- Wood Lathe Face Plate 6 Mounting Hole Lathe Faceplate Chuck Faceplate - Feature: 1. Applicable Chucks: This lathe faceplate is suitable for K11 80, K72 80, K12 80 and other kinds of 80mm chucks, which is applicable to a wide range. High Manganese Steel: This lathe faceplate is made of high manganese steel, which is heavy and hard, rust free and sturdy.
- For Wood Lathe Chuck Wood Lathe Chuck Adapter Black Precision Hot Sale - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. Color: Black. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter 1 Pc For Wood Lathe Chuck Screw Thread Spindle Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Brand New Chuck Adapter Matel Screw Thread Silver Spindle Adapter 1 Pc - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. Color: Silver. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- For Wood Lathe Chuck Wood Lathe Chuck Adapter Black Precision Hot Sale - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. Color: Black. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter For Wood Turning Tools 1 Pc Screw Thread Spindle Adapter - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter 1/8'' To 3/4-10'' For Wood Lathe Chuck High Quality - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter Wood Lathe Screw Thread Spindle Adapter 1/8'' To 3/4-10'' - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For-Wood-Turning Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Brand New Chuck Adapter Matel Screw Thread Silver Spindle Adapter 1 Pc
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New
- Wood Lathe Chuck Adapter 1 Pc For Wood Lathe Chuck Screw Thread Spindle Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter Wood Lathe For Wood Lathe Chuck Screw Thread 1/8'' To 3/4-10'' - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Brand New Chuck Adapter Matel Screw Thread Silver 1/8'' To 3/4-10'' - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. Color: Silver. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Brand New Chuck Adapter Matel Screw Thread Silver 1/8'' To 3/4-10'' - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. Color: Silver. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Brand New Chuck Adapter Wood Lathe Spindle Adapter 1/8'' To 3/4-10'' - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter 1 Pc For Wood Lathe Chuck For Wood Turning Tools - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter For Wood Turning Tools Matel Screw Thread Spindle Adapter
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Brand New Chuck Adapter Wood Lathe Matel Screw Thread 1/8'' To 3/4-10'' - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New
- Wood Lathe Chuck Adapter 1 Pc 1/8'' To 3/4-10'' For Wood Lathe Chuck
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New
- Brand New Chuck Adapter Wood Lathe Matel Screw Thread 1/8'' To 3/4-10'' - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New
- Chuck Adapter For Wood Turning Tools Matel Screw Thread Spindle Adapter - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter 1 Pc 1/8'' To 3/4-10'' For Wood Lathe Chuck
- Wood Lathe Chuck Adapter 1 Pc For Wood Lathe Chuck Screw Thread Spindle Adapter
- Wood Lathe Chuck Adapter 1 Pc For Wood Lathe Chuck Screw Thread Spindle Adapter
- Chuck Adapter For Wood Turning Tools 1 Pc Screw Thread Spindle Adapter
- Chuck Adapter For Wood Turning Tools Matel Screw Thread Spindle Adapter - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter 1 Pc For Wood Lathe Chuck Screw Thread Spindle Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Brand New - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter 1 Pc 1/8'' To 3/4-10'' For Wood Lathe Chuck
- Wood Lathe Chuck Adapter 1 Pc 1/8'' To 3/4-10'' For Wood Lathe Chuck
- Chuck Adapter For Wood Turning Tools Matel Screw Thread Spindle Adapter
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter For Wood Turning Tools 1 Pc Screw Thread Spindle Adapter
- 2" HD Steel Wood Lathe Face Plate, 1" x 8tpi Threaded - 3/8" Thick Steel Faceplate - Heavy and Rigid.
- Brand New Chuck Adapter Matel Screw Thread Silver 1/8'' To 3/4-10'' - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. Color: Silver. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- 3" HD Steel Wood Lathe Face Plate, 3/4" X 16TPI Threaded - Flat spots cut on back spigot for easy removal from lathe. 3" Thick Steel Faceplate - Heavy and Rigid.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe
- Wood Lathe Chuck Adapter 1 Pc For Wood Lathe Chuck For Wood Turning Tools
- Chuck Adapter For Wood Turning Tools 1 Pc Screw Thread Spindle Adapter
- Wood Lathe Chuck Adapter 1 Pc For Wood Lathe Chuck Screw Thread Spindle Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter 1 Pc For Wood Lathe Chuck For Wood Turning Tools - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter For Wood Turning Tools 1 Pc Screw Thread Spindle Adapter - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter 1 Pc For Wood Lathe Chuck For Wood Turning Tools
- Wood Lathe Chuck Adapter 1 Pc For Wood Lathe Chuck For Wood Turning Tools
- Wood Lathe Chuck Adapter 1 Pc 1/8'' To 3/4-10'' For Wood Lathe Chuck
- Wood Lathe Chuck Adapter 1 Pc For Wood Lathe Chuck Screw Thread Spindle Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter 1 Pc For Wood Lathe Chuck Screw Thread Spindle Adapter
- Wood Lathe Chuck Adapter 1 Pc For Wood Lathe Chuck For Wood Turning Tools - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter 1 Pc 1/8'' To 3/4-10'' For Wood Lathe Chuck
- Chuck Adapter For Wood Turning Tools 1 Pc Screw Thread Spindle Adapter - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- 10” 12” Atlas Craftsman #9-15 Metal Lathe Face Plate 6" Dia. 1-1/2" x 8 TPI (3C)
- South Bend SFP-100NK 5" Face Dog Plate 9" 10k Lathe 1-1/2"-8TPI (Loc:4-A)
- BUCK CHUCK Lathe Chuck Adapter Back Plate: 6″ Chuck for Self-Centering - Spindle Nose Type D Series. Chuck Compatibility Self-Centering Chucks. Mount Type D1-4. 155 Center Ct, Venice, FL 34285.
- Brand New Wood Lathe Chuck Adapter Black Precision For Wood Lathe Chuck - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. Color: Black. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Chuck Adapter For Wood Turning Tools 1 Pc Screw Thread Spindle Adapter
- Matel Chuck Adapter Spindle Adapter 1/8'' To 3/4-10'' Accessories Connector Tool - 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter 1 Pc 1/8'' To 3/4-10'' For Wood Lathe Chuck - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe
- Brand New Chuck Adapter Wood Lathe Screw Thread Silver Spindle Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. Color: Silver. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Brand New Chuck Adapter Wood Lathe Screw Thread Silver Spindle Adapter - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. Color: Silver. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter 1 Pc For Wood Lathe Chuck For Wood Turning Tools
- Wood Lathe Chuck Adapter 1 Pc 1/8'' To 3/4-10'' For Wood Lathe Chuck
- Bison 7-875-126 Set Tru D1-6 Adapter Plate 12" - Credit Card or Debit Card.
- Wood Lathe Face Plate 6 Mounting Hole Lathe Faceplate Chuck Faceplate - Feature: 1. Applicable Chucks: This lathe faceplate is suitable for K11 80, K72 80, K12 80 and other kinds of 80mm chucks, which is applicable to a wide range. High Manganese Steel: This lathe faceplate is made of high manganese steel, which is heavy and hard, rust free and sturdy.
- Wood Lathe Chuck Adapter Screw Thread Spindle Adapter For Wood Turning Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Baldor Reliance Information Plate LR40567 - We are not an authorized dealer of this product. This product has no manufacturers warranty.
- Tool Steel Quality Back Plate For Rotary Tables To Mount Chucks (Supplied Wit... - PRECISELY MACHINED. MOUNTING THREAD IS M12 X 1 M6 X COUNTERED BORED SO THAT T NUTS SITS INSIDE THEM PERFECTLY.SUPPLIED WITH 3 X T NUTS + BOLTS AS PER BACK PLATE 'S SIZE. THE OTHER SIZE OF THE PLATE HAS A LOCATING SPIGOT OF 13.9 MM, THAT SITS IN THE CENTER OF THE ROTARY TABLE.
- 16" Slotted Face Plate
- Back Plate For Rotary Table and Chucks T-Nuts Blots - TOOL STEEL QUALITY BACK PLATE FOR ROTARY TABLES TO MOUNT CHUCKS (SUPPLIED WITH RELEVANT 3 X TNUTS +BOLTS) - ENGINEERING TOOLS. Caste Iron Backplates for mounting collet chucks or alternative lathe chucks.
- Adapter Mounting Back Plate for Round Grinding Magnetic Chuck
- AP8-D5 8" D1-5 Fully Machined Camlock Back Plate for CS FS Lathe Chucks New R[ - LATHE CHUCK CATEGORYBack Plates Camlock Mounting. AP series adaptor plates are compatible with FS, CS series, Gator lathe chuck, and also Bison lathe chuck. Lathe Chuck FS83 8" 3 Jaw Forged Steel Self Centering Scroll Lathe Chuck.
- Royal #44009, A2-6 Spindle to A2-6 Chuck Adapter/Spacer Plate
- 100 mm Back Plate Adaptor For Rotary Table With Boxford Thread + T- Nuts - Both a 3 as well 4 Slot rotary table. Supplied with 3 Sets of suitable T- nuts. Very sturdy & well finished. Has Myford Thread 1--1/2 x 8 TPI to mount the chuck.
- 8" DOG DRIVE LATHE FACE PLATE w/ L0 MOUNT - This is an 8" Dog Drive Lathe Face Plate w/ L0 Mount. Plate Thickness: 1". Thru Hole: 2-9/16".
- Shop Fox D3754 Small 4-Jaw Chuck with Plate - Item model number D3754. Part Number D3754. We're happy to help. We do not accept P.O. Boxes. Country of Origin China. From the Manufacturer.
- Lathe Chucks and Faceplates for Engine Lathe - List is below. 16" Faceplate. Feel free to inspect. Located in Bridgeport, CT 06607.
- lathe chuck mounting plate D1-3 for Bison 6" 3 jaw, 6 jaw set- tru D - This is chuck plate D1-3 for Bison 6", 3 jaw and 6 jaw set-tru chucks. This plate has extra holes drilled in for unknown reason but will not hurt the functionality of this item. The plate does not come with pins. This is sold as is.
- Tool Steel Quality Back Plate For Rotary Tables To Mount Chucks Supplied With... - PRECISELY MACHINED. MOUNTING THREAD IS M12 X 1 M6 X COUNTERED BORED SO THAT T NUTS SITS INSIDE THEM PERFECTLY.SUPPLIED WITH 3 X T NUTS + BOLTS AS PER BACK PLATE 'S SIZE. THE OTHER SIZE OF THE PLATE HAS A LOCATING SPIGOT OF 13.9 MM, THAT SITS IN THE CENTER OF THE ROTARY TABLE.
- D1-5 chuck back plate 7-1/2” ,south bend, - D1-5 chuck back plate 7-1/2” ,south bend,. I think this may be a back plate but I’m not 100% positive,if you know different let me know. I figured it needs to be machined
- New Old Stock Don Pencil 2" Aluminum Precision Wood Turning Face Plate 1"-8 TPI - From an estate of a dedicated wood turner.
- New Old Stock Don Pencil 3" Aluminum Precision Wood Turning Face Plate 1"-8 TPI - From an estate of a dedicated wood turner.
- 6" 3-JAW SELF-CENTERING LATHE CHUCK top & bottom jaws w. D1-3 adapter back plate - 6" - 3 JAWS Self-Centering T.I.R.---0.003" w. D1-3 adapter backing plate. TWO PCS TONGUE AND GROOVE REVERSIBLE HARDENED top & bottom JAWS. TOP QUALITY.
- 10-3/4" Atlas Southbend Lathe Faceplate Face Plate W/ 1-3/4-8 Threaded Mount - 10-3/4" ATLAS SOUTHBEND LATHE FACEPLATE FACE PLATE W/ 1-3/4-8 THREADED MOUNT.
- 4" 4 Jaw Independent Lathe Chucks 1-1/2-8 Back Plate 202-5419 BO1 - LATHE CHUCK CATEGORYIndependent Lathe Chucks. 1 lathe chuck key. Internal Jaw CHUCK THICKNESS2.126. Find your location and color to see what zone you are in. Clamping Range A-A1: 0.236-1.771". Clamping Range B-B1: 1.574-3.937".
- Powermatic Model #90 Wood Lathe 3-1/4" Face Plate 1-1/2" x 8 TPI (101882) - 1 - Powermatic #90 Wood Lathe 3-1/4" Face Plate 1 1/2" x 8 TPI.
- Wood Lathe Face Plate 6 Mounting Hole Lathe Faceplate Chuck Faceplate - Feature: 1. Applicable Chucks: This lathe faceplate is suitable for K11 80, K72 80, K12 80 and other kinds of 80mm chucks, which is applicable to a wide range. High Manganese Steel: This lathe faceplate is made of high manganese steel, which is heavy and hard, rust free and sturdy.
- Lathe Chuck Adapter Back Plate for 9.5" Dia. Chucks D1-6 Mount - This is a used lathe adapter plate as pictured.
- 8" 3 JAW Lathe Chuck mount D1-6 - 8 INCH 3 JAW WITH REMOVABLE JAWS MOUNT D1-6
- 6" Lathe Chuck mount L-O
- Adapter Back Plate Lathe Chuck mount L-O - adaptor plate dims are in pictures
- Adapter Back Plate Lathe Chuck mount D1-5 - adaptor plate dims are in pictures
- Buck Chuck Adapter Back Plate Lathe Chuck mount D1-4 - adaptor plate dims are in pictures
- Buck Chuck Adapter Back Plate for 6" Dia Lathe Chuck D1-4 - adaptor plate dims are in pictures
- Wood Lathe Chuck-Adapter Screw Thread Spindle Adapter For Wood Turning Lathe US - Pop Up Crawl Through Tunnel Play Tent Toy Caterpillar for Baby Infant Kids / Dog. Wooden Wall Mounted Hanging Hanger Hooks Key Holder Storage Door Rack Organizer. 1 × Wood Lathe Chuck Adapter. Suitable for: Wood Lathe Chuck.
- Wood Lathe Chuck-Adapter Screw Thread Spindle-Adapter For Wood Turning-Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- D1-6 CAM LOCK BACK PLATE / FACE PLATE 9-1/2" Dia. - D1-6 Cam Lock. Back Plate / Face Plate. 2-1/2" Hole.
- 1X Wood Lathe Chuck Adapter Screws Thread Spindle Adapter For Wood Turning Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- HARDINGE Buck Chuck D6 Adapter For 8" AT or BVC B8D6 - Buck Chuck D6 Adapter. Spindle Nose Type D Series. Nominal Chuck Size 8 in. Chuck Compatibility Self-Centering Chucks. Adapter plate is in good condition. Includes bolts and screws. SOLD AS IS. Mount Type D1-6.
- Wood Lathe Chuck-Adapter Screw Thread Spindle-Adapter For Wood Turning-Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Brand New Wood Lathe Chuck Adapter Black Precision For Wood Lathe Chuck - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. Color: Black. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck-Adapter Screw Thread Spindle-Adapter For Wood Turning-Lathe - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- 1 pc 5" Chuck Back Plate 1" x 8 South Bend, Logan, Atlas, etc Poland
- 1 pc 4" Chuck Back Plate 1-1/2" x 8 machinable South Bend, Logan, Atlas, etc
- 1 pc 7-3/4" Chuck Back Plate 1-1/2" x 8 machinable South Bend, Logan, Atlas, etc
- Monarch 10EE 5" Dog Drive Plate - Monarch SN EE49544 - D1-3 Back - Excellent! - Monarch 10EE 5" Dog Drive Plate - D1-3 Back - Excellent condition.
- Back Plate For Rotary Table and Chucks T-Nuts Blots Lathe Milling Machine Tools - TOOL STEEL QUALITY BACK PLATE FOR ROTARY TABLES TO MOUNT CHUCKS (SUPPLIED WITH RELEVANT 3 X TNUTS +BOLTS)-ENGINEERING TOOLS. Caste Iron Backplates for mounting collet chucks or alternative lathe chucks.
- 3" Lathe Faceplate 1" x 8 Tpi RHT (5289) - Should fit Delta, Rockwell, General & Nova lathes with a 1" x 8tpi.
- Bison 8212-5"-6 Lathe 5" Chuck Adapter Back Plate Made In Poland MS - Bison 8212-5"/6 Lathe 5" Chuck Adapter Back Plate. Made In Poland.
- Wood Lathe Chuck Adapter Thread Inner Diameter18mm For Wood Lathe Chuck - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- Wood Lathe Chuck Adapter Thread Inner Diameter18mm For Wood Lathe Chuck - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- South Bend 14-1/2” & 16” Metal Lathe Face Plate 12" diameter 2-3/8”-6tpi Estate - Exact item shown, 12" (well, 11 7/8 really) heavy faceplate with 2-3/8-6 threads, stamped 14-1/2 - 16. I didn't find any other markings on it, it is sized to fit South Bend lathes of those sizes, nicely made whether it is SB or not -.
- 13" Diameter D1-6 Mount Lathe Drive Plate - 13" Diameter D1-6 Mount Lathe Drive Plate Has some surface rust, Comes as Shown
- 9" Diameter D1-6 Mount Lathe Dog Drive Plate - 9" Diameter D1-6 Mount Lathe Dog Drive Plate . It is missing 4 of the cap screws that hold in pins, however all the threads are good, just need to add the cap screws. Comes as Shown
- Woodworking Lathe Flange Faceplate 2,3,4inch For 1" x 8 tpi or M33*3.5 Spindle - Feature: Perfect for all small bowl turning Fits any lathe with a 1-Inch by 8TPI spindle thread or M33*3.5 spindle thread 2/34-Inch diameter faceplate Has machined flats to grip with a wrench - easy on and easy off All steel construction Package Included: 1Pc Face plate Note: Due to the light, there may be slight differences between the color of the object and the picture of the product.
- Woodworking Lathe Faceplate 2,3,4inch For 1" x 8 tpi or M33*3.5 Spindle - Feature: Perfect for all small bowl turning Fits any lathe with a 1-Inch by 8TPI spindle thread or M33*3.5 spindle thread 2/34-Inch diameter faceplate Has machined flats to grip with a wrench - easy on and easy off All steel construction Package Included: 1Pc Face plate Note: Due to the light, there may be slight differences between the color of the object and the picture of the product.
- Hougen 12337 37MM X 25MM "12,000-Series" Annular Cutter - Use Hougen "12,000-Series" Cutters with stationary tools, drill presses and magnetic drills. 1" (25mm) depth of cut. Cuts holes faster, more accurate and cleaner than competitive tools. Unique Hougen features provide the best performance in the widest range of materials.
- Manual Wood Lathe Chuck Flange Face Plate Steel Woodworking Turning Thread Tools - 1 piece M33 x 3.5 Wood Face Plate. 2"(50mm) & 3"(75mm): 1 piece M18 x 2.5 Wood Face Plate. 4"(100mm) & 5"(150mm): 1 piece Wood Face Plate with a Adapter.
- Warner & Swasey #5 Lathe Plates 8758130 - Old Cargo Tub-20 3-20-23. For office use ONLY!
- Back Plate for rotray tables to mount chucks(DIA 100 MM- RECESS 70 MM)-USA - Back plate for rotary tables to mount chucks (supplied with relevant 3 x tnuts +bolts) (dia 100 mm- recess 70 mm) -USA FULLFILED. Recess 70 Mm. 3 X 6 Mm Thread Drills. M6 Size Countered Bored So That T Nuts Sits Inside Them Perfectly.
- HARDINGE LATHE SPINDLE NOSE ADAPTER chuck plate metal mount holder tool Collet - We Have Multiple Units Of This Available. Just Ask If You Need Any More!
- HARDINGE LATHE SPINDLE NOSE ADAPTER chuck plate metal mount holder tool collet - Hardinge USA marked16C / 30C. Hardinge spindle taper on 1 side.
- Bison D1-8 Type D Camlock Finished Adapter Plate for 16" SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production. 15-3/4" D1-8 6 1.0" 11.75 6.75 5.50075 5.358 - 6.748 5/8-11 - 1.50.
- Bison D1-11 Type D Camlock Finished Adapter Plate for 12" SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production. 12-1/2" D1-11 6 1-3/16" 12.40 9.25 7.75055 4.055 7.086 11.260 M16 x 2.00. 75 2.52.
- Bison D1-3 Type D Camlock Finished Adapter Plate for 5" SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production. 5.0" D1-3 3 9/16" 4.92 2.78 2.1250 1.378 2.164 4.252 M8 x 1.25. 55 1.57.
- 2-1/4" Set Back Plate (Retro) 2505 - Sold as pictured.
- Good Vintage 8" Machinist Lathe Face Plate 2-3/8" x 6 TPI South Bend SFP-101FH - The item for sale here is a nice 8" Face Plate. It is in good used condition. Help yourself to a good deal! You are looking at an item listed by Davey Salvage & Antiques. from Antiques and Auto Parts, Collectibles, Household, and Tools.
- lathe face plate 15.5" - lathe face plate 15.5", it came from a Cazeneuve lathe, in good condition, weights 67 pounds, shipping to the lower 48 states.
- Cazeneuve lathe face plate 19.5" - lathe face plate 19.5", it came from a Cazeneuve lathe, in good condition, weights 94 pounds, shipping to the lower 48 states.
- HARDINGE LATHE SPINDLE NOSE ADAPTER Chuck Plate Metal Mount Holder Tool Collet - Hardinge USA marked16C / 20C. Hardinge spindle taper on 1 side.
- HARDINGE LATHE SPINDLE NOSE ADAPTER chuck plate Holder Tool Collet 3" - We Have Multiple Units Of This Available. Just Ask If You Need Any More!
- 6-1/2” Lathe Face Plate 1-1/8” x 12tpi - 6-1/2” Lathe Face Plate 1-1/8” x 12tpi. Used condition, inner threads look like they can be cleaned up some. Sold as you see it, please message me with questions
- D1-11 lathe chuck adapter - Here is a semi finished D1-11 chuck adapter plate.
- 4? Steel Wood Lathe Face Plate 1? X 8Tpi Threaded Heavy Faceplate Rigid - Steel Wood Lathe Face Plate 1?. X 8Tpi Threaded Heavy Faceplate Rigid. Flat spots cut on back spigot for easy removal from lathe. 7/16" Thick Steel Faceplate - Heavy and Rigid.
- GIBRALTAR Lathe Chuck Adapter Back Plate 8" Chuck Threaded A1/A2–8 Mount (c) - Lathe Chuck Adapter Back Plate: 8 " Chuck. Threaded, A1/A2 –8 Mount, Steel.
- 6 Steel Wood Lathe Face Plate, 1-1/4 x 8tpi Threaded - Click here to see description.
- Shars 6.3" D1-4 Fully Machined Lathe Chuck Back Plate for 6" 4 Jaw Chuck R - Shars 6.3" D1-4 Fully Machined Lathe Chuck Back Plate for 6" 4 Jaw Independent Chuck NEW. For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- Shars 6.3" D1-4 Fully Machined Lathe Chuck Back Plate for 6" Independent Chuck R - For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- LATHE FACE PLATE 12-3/4"D, 16 Slots, A1-5 Mt, Ribbed Reinfd Cast Iron, 4 Screws - With 16 Slots, A1-5 Taper Mount, Ribbed-Reinforced Cast Iron and 4 Mounting Screws. (3103) You are purchasing what is shown in photos only. All photos are of the actual product(s) you will receive and are intended to help describe the quality and condition of the piece(s).
- 14" Face Plate Faceplate for Lathe
- 15.5" Face Plate Faceplate OF-151 for Lathe
- 13.5" Face Plate Faceplate for Lathe
- 23-1/2" Lathe Chuck Mounting Plate -Fits Bison 3562-20 Chuck - Height : 12". Weight :250 lbs. Width : 36".
- 18" Dia. Indexer Mounting Plate for 16" Bison Chuck
- back plates for mounting chucks on lathe - Lathe face plates for mounting chucks on lathes.
- back plates for mounting chucks on lathe, these are used but in good condition - Lathe face plates for mounting chucks on lathes.
- lathe plate for mounting chucks - Lathe face plate for mounting chucks on lathes.
- 9-5/8" DOG DRIVE LATHE FACE PLATE / CATCHPLATE w/ D1-6 MOUNT - This is a 9-5/8" Dog Drive Lathe Face Plate / Catch Plate w/ D1-6 Mount. Mount: D1-6. Plate Thickness: 1-1/8". Thru Hole: 4".
- 1-1/4" x 7 TPI Spindle Thread - 5" Chuck Back Plate - fits Barnes 13 Lathe - 1-1/4" x 7 TPI spindle thread. Lathe chuck back plate. Never been cut or drilled to fit any chuck.
- 19-5/8" Lathe Faceplate Face Plate W/ D1-8 Mount - 19-5/8" LATHE FACEPLATE FACE PLATE W/ D1-8 MOUNT. 3-3/16 thru hole
- Lathe Headstock Spindle Adapter Thread Chuck Turning Woodworking Accessories New - Surface Finish: Black Oxide.
- Lathe Face Plate L2 Mount 23-3/8"-Used - The L2 Lathe Mount is an approximate chuck mounting!
- BUCK CHUCK COMPANY Lathe Chuck Adapter Back Plate: 10″ Chuck, for Self-Centering - Spindle Nose Type D Series. Chuck Compatibility Self-Centering Chucks. Mount Type D1-6. Date febn 13 23. 155 Center Ct, Venice, FL 34285. Industry Recycles.
- Brand New Wood Lathe Chuck Adapter Black Precision For Wood Lathe Chuck - Suitable for: Wood Lathe Chuck. 1 × Wood Lathe Chuck Adapter. Color: Black. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
- 6" D1-5 Adapter Plate For Sk-6
- 10" D1-8 Adapter Plate
- 8" Adapter Plate - D1-6 8"ADAPTER PLATE.
- L00 Face Drive Dog Plate 8" Fits Leblond Clausing Rockwell Lathe - Specifications: L00 8" fits leblond clausing Rochwea lathe. Machine it fits - lathe. Condition - Dinges and scratches. Partial thread roll on the backside. Flaws - Thread roll. Face Drive Dog Plate.
- L00 8" Face Drive Dog Plate Fits Leblond Clausing Rockwell - Model - L00. Machine it fits - N/A. inventory: Box C2. Depth - 9". No PO boxes.
- MT2 Morse Taper to 4" Diameter Chuck Back Plate Blank - Good used condition as shown.
- Gibraltar - Adapter Back Plate for 4 Inch Diameter Lathe Chucks A1/A2 –8 - Lathe Chuck Adapter Back Plate: 4 " Chuck. GIBRALTAR 93220101.
- 6" 4 Jaw Independent Chuck + 6.3" D1-3 Fully Machined Lathe Chuck Back Plate R[ - For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- 17.5" Face Plate Faceplate for Lathe A2-6 Mount
- Morse Taper 2 (draw bar threads)Semi-Finished Lathe Chuck Adapter Plate Loc:1#E2
- 4 Steel Wood Lathe Face Plate 1 x 8tpi Threaded - Feature: Flat spots cut on back spigot for easy removal from lathe.
- 9" Lathe Dog Drive Face Plate D1-6 Camlock - 2" ID Thru Hole 1" Slot Width.
- 9 1/4" Lathe Dog Drive Face Plate D1-8 Camlock
- Buck B12-D8 set tru adapter plate, Buck 6-jaw chuck, D1-8 spindle, lathe - Here is a Buck B12-D8 lathe chuck adapter plate for the early Buck 12" set tru lathe chucks made in the USA.
- Heavy 10 South Bend Sfp-100L 5-1/2" Face & Dog Drive Plate 2 1/4"-8 Tpi - HEAVY 10 SOUTH BEND SFP-100L 5-1/2" FACE & DOG DRIVE PLATE 2 1/4"-8 TPI. Good condition.
- BUCK CHUCK Adapter Back Plate for 12" Dia Self Centering Lathe Chuck D1-6 B12-D6 - Adapter Back Plate for 6" Dia Self Centering Lathe Chuck. Spindle Nose Type D Series. Nominal Chuck Size 12 in. Chuck Compatibility Self-Centering Chucks. Adapter plate is in good condition. Has wear from previous use and there is a ding/chip on the edge of the plate.
- 3" Hd Steel Wood Lathe Face Plate 3/4" X 16tpi Thre - Flat spots cut on back spigot for easy removal from lathe. 3" Thick Steel Faceplate - Heavy and Rigid. The order will be processed and completed by automatic warehouse system within 5 minutes. Order Cancellation Policy .
- Wood Lathe Face Plate, 5-3/4" Dia, Adapter, Back Plate - Wood Lathe Face Plate, 5-3/4" Dia, Adapter, Back Plate. Threads measure 22mm in with calipers. I count 6 threads. You are buying what is in the photos
- 16C Hardinge Back Mounting Plates CNC Lathe - Sold as is where is.
- Back Plate For Rotary Tables (DIA 125 MM- RECESS 95 MM)-USA FULFILLED - (Back plate for rotary tables to mount chucks (supplied with relevant 3 x tnuts +bolts)-engineering tools mm (dia 125 mm- recess 95 mm)). Recess is 95 mm. 3 x 8 mm threaded drills to mount a 3 jaw chuck & m8 counter bored to attached the back plate with the rotary table's t slot.
- AP8-D4 8" D1-4 Fully Machined Camlock Back Plate for CS FS Lathe Chucks New R[ - LATHE CHUCK CATEGORYBack Plates Camlock Mounting. AP series adaptor plates are compatible with FS, CS series, Gator lathe chuck, and also Bison lathe chuck. Centering Scroll Lathe Chuck FS83 8" 3 Jaw Forged Steel Self Centering Scroll Lathe Chuck.
- Back Plate For Rotary Table To Mount Chuck (DIA 125mm-RECESS 95mm)-Ship From USA - RECESS IS 95 MM. 3 x 8 MM THREADED DRILLS TO MOUNT A 3 JAW CHUCK & M8 COUNTER BORED TO ATTACHED THE BACK PLATE WITH THE ROTARY TABLE'S T SLOT. Back Plate For Rotary Table To Mount Chuck (DIA 125mm-RECESS 95mm).
- 8 Inch Diameter Threaded Lathe Back Plate - 8 INCH DIAMETER THREADED LATHE BACK PLATE. 8 TPI , 1/2 INCH THICK, 2 1/4 INCH OPENING. SELLING AS IS CHECK OUT PICTURES
- L-Style, 5" Dia. Chuck Adapter Plate, 3-1/2" 4Tpi Thread. L-000? Rare Find - 3-1/2" 4TPI x 1" THICK THREAD (COULD BE L-000 MOUNT). L-STYLE, 5" DIA. CHUCK ADAPTER PLATE, RARE FIND! I.D. TAPER IS 10 DEGREES. (3) 5/16" HOLES ON 3-7/8" DIA. BOLT CIRCLE.
- 12 inch slotted lathe face plate 91-c4 mount - 12 inch slotted lathe face plate 91-c4 mount. Center hole, not threaded. 2 3/8”See photos
- 4? Steel Wood Lathe Face Plate 1? X 8Tpi Threaded Heavy Faceplate Rigid - Steel Wood Lathe Face Plate 1?. X 8Tpi Threaded Heavy Faceplate Rigid. Flat spots cut on back spigot for easy removal from lathe. 7/16" Thick Steel Faceplate - Heavy and Rigid.
- (2-Pk) Southbend Sign 8" x 1-1/4" - (2-Pk) Southbend Sign 8" x 1-1/4". We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
- Interstate 09670126 5C Horizontal Collet Block Chuck 1/16" - 1-1/8"
- Interstate 09670142 Lever Collet Closer 5C Collet Block Chuck - We are happy to help.
- Interstate 09670118 5C Collet Block Chuck Square with Closer Nut - We are happy to help.
- Buck Chuck Adapter Back Plate for 10″ Diam Self Centering Lathe Chucks - Chuck Compatibility Self-Centering Chucks. Spindle Nose Type D Series. Nominal Chuck Size 10 in. Mount Type D1-6.
- Buck Chuck Adapter Back Plate for 8" Diam Self Centering Lathe Chuck D1-6 B8D6 - Adapter Back Plate for 8" Diam Self Centering Lathe Chuck. Buck Chuck. Spindle Nose Type D Series. Nominal Chuck Size 8 in. Chuck Compatibility Self-Centering Chucks. Mount Type D1-6. OPEN BOX. Item is in excellent condition, with no signs of previous use or wear.
- TMX (7-874-105) A2-5 Steel Adapter Plate for 10" Chucks - Chuck Machine Taper - CAT50. Collet Size - ER20. Item(s) described above and exactly what's pictured. Thru Coolant - Yes.
- LARGE VINTAGE LATHE CHUCK BACK PLATE ADAPTOR 4.5" x 2 TPI SPINDLE MOUNT - This is a Vintage (possibly Antique) Lathe chuck back plate adaptor that came off of a very old Cushman chuck... It is cast iron... I'm no expert but think it has a very large 2 TPI ACME spindle mount. There are (15) pictures included and the first (5) of them have all the dimensions shown. This is not an item you'll find easily anymore and it will ship out fast via USPS Priority mail...
- Buck Chuck Adapter Back Plate for 12" Dia Self Centering Lathe Chuck D1-8 B12-D8 - Buck Chuck. Spindle Nose Type D Series. Nominal Chuck Size 12 in. Chuck Compatibility Self-Centering Chucks. Adapter Back Plate. NEW/OPEN BOX. Item is in excellent condition, with no signs of previous use or wear.
- Steel Face Plate 1"-8 Threaded for Wood Lathe Turning 3" - 4 holes on plate to ease mounting of your work piece. Precision machined face with 1 ring. Distanc of two hole center: 60mm.
- Bison 16" A1/A2-8 Semi Machined Adapter Plate For Scroll or Lathe Chuck - NEW - This is a BISON Semi-machined adaptor for plain back chucks with A1 & A2 Spindle noses... The manufacturers part number is: 7-873-168... This item is brand new and comes just as seen in the (9) pictures... I can't find one of these selling retail for less than $800 (plus shipping & tax etc)... It weighs approx. 100 lbs in the crate and will ship out fast via UPS Ground (sorry I don't make the shipping quote!)...
- Bison D1-6 Type D Camlock Finished Adapter Plate for 8" SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production. 8.0" D1-6 6 7/8" 7.87 5.25 4.1878 2.165 4.330 6.929 M10 x 1.25. 67 2.01.
- Bison D1-6 Type D Camlock Finished Adapter Plate for 6" SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production. 6-1/4" D1-6 6 7/8" 6.69 5.25 4.1878 1.654 3.385 5.512 M10 x 1.5. 63 1.97.
- Back Plate For Rotary Tables (DIA 80 MM-RECESS 55 MM )-USA FULFILLED - RECESS 55 MM. 3 X 6 MM THREAD DRILLS. M6 SIZE COUNTERED BORED SO THAT T NUTS SITS INSIDE THEM PERFECTLY. BACK PLATE FOR ROTARY TABLES TO MOUNT CHUCKS (SUPPLIED WITH RELEVANT 3 X TNUTS +BOLTS)-ENGINEERING TOOLS (DIA 80 MM-RECESS 55 MM (FOR HV4/HV6 ROTARY TABLE)).
- Bison 8" Lathe Chuck Adapter Back Plate #8293-8 (358293030400) - New Open Box - This is a brand new (no box or packaging) BISON 8293-8 Chuck back or adaptor plate... I'm not sure of it's application so please know what you're bidding on and feel free to ask questions. The Bison part number is 358293030400 ... Shipped out fast via USPS Priority mail...
- Back Plate For Rotary Table To Mount Chuck (DIA 100MM-RECESS 70MM)-Ship From USA - Back Plate For Rotary Tables To Mount Chucks (Supplied With Relevant 3 X Tnuts +bolts) (Dia 100 Mm- Recess 70 mm). Recess 70 Mm. 3 X 6 mm Thread Drills. M6 Size Countered Bored So That T Nuts Sits Inside Them Perfectly.
- Back Plate For Rotary Tables With Relevant 3 X Tnuts +Bolts) Usa Fulfilled - TOOL STEEL QUALITY BACK PLATE FOR ROTARY TABLES TO MOUNT CHUCKS (SUPPLIED WITH RELEVANT 3 X TNUTS +BOLTS)-ENGINEERING TOOLS. THE OTHER SIZE OF THE PLATE HAS A LOCATING SPIGOT OF 13.9 MM, THAT SITS IN THE CENTER OF THE ROTARY TABLE.
- Large Face Plate, D-Series? Lathe, 9" Diameter, Machinist Adapter Plate - Large Lathe Part. We have been told this is a "Lathe Head Plate or Face-plate". We are machinists or experts we will attempt to describe its in detail. It appears to be a D-Series but we're not sure.
- Back Plate For Rotary Tables (Dia 65 Mm - M14 X 1)-(Usa Fulfilled) - (DIA 65 MM - M14 X 1). MADE OF TOOL STEEL. PRECISELY MACHINED. MOUNTING THREAD IS M14 X 1. TOOL STEEL QUALITY BACK PLATE FOR ROTARY TABLES TO MOUNT CHUCKS (SUPPLIED WITH RELEVANT 3 X TNUTS +BOLTS)-ENGINEERING TOOLS.
- Back Plate For Rotary Tables With Relevant 3 X Tnuts +Bolts) Usa Fulfilled - TOOL STEEL QUALITY BACK PLATE FOR ROTARY TABLES TO MOUNT CHUCKS (SUPPLIED WITH RELEVANT 3 X TNUTS +BOLTS)-ENGINEERING TOOLS. THE OTHER SIZE OF THE PLATE HAS A LOCATING SPIGOT OF 13.9 MM, THAT SITS IN THE CENTER OF THE ROTARY TABLE.
- Self Centering Chucks for Rotary Tables & Lathe Machine Tools - USA FULFILLED - Chucks for Rotary Tables & Lathe Machine Tools. Quality Precision Caste Iron Body 50 mm 3 Jaws Self Chucks with Tool Steel Hardened Jaws. Quality Precision Caste Iron Body 50 mm 4 Jaws Self Chucks with Tool Steel Hardened Jaws.
- Chucks for Rotary Tables & Lathe Machine Tools - USA FULFILLED - Chucks for Rotary Tables & Lathe Machine Tools. Quality Precision Caste Iron Body 50 mm 3 Jaws Self Chucks with Tool Steel Hardened Jaws. Quality Precision Caste Iron Body 50 mm 4 Jaws Self Chucks with Tool Steel Hardened Jaws.
- Back Plate For Rotary Table To Mount Chuck (DIA 80mm-RECESS 55mm)-Ship From USA - RECESS 55 MM. 3 X 6 MM THREAD DRILLS. M6 SIZE COUNTERED BORED SO THAT T NUTS SITS INSIDE THEM PERFECTLY. Back Plate For Rotary Table To Mount Chuck (DIA 80mm-RECESS 55mm). 3 X M6 COUNTER BORED. PLATE IS DRILLED IN A MANNER THAT IT CAN FIT TO BOTH A 3 AS WELL AS 4 SLOT ROTARY TABLE.
- 2 HD Steel Wood Lathe Face Plate
- Metal Lathe Chuck Backing Plate Dog Drive Face Plate 5 TPI Machinist Tool
- Lathe T-Handles, Lathe Tool Post Wrenchs, Mill Vise Handles, ( 12 Used Items )
- 3" HD Steel Wood Lathe Face Plate 3/4" X 16TPI Threaded - Flat spots cut on back spigot for easy removal from lathe. 3" Thick Steel Faceplate - Heavy and Rigid.
- Lathe Chuck Backing Plate "Cam Lock" 4 Pin .875 Diameter (Used) - PIN CENTERLINES 2.60 x 4.50. PLATE THICKNESS 1.825 MAX. CENTER TO CENTER OF 4 TAPPED HOLES 3.455 ( 3/8-16 TAPPED HOLES ).
- 6" Lathe Faceplate 1 1/8" x 12 Tpi RHT (101954) - 6" Lathe Faceplate 1 1/8" x 12 Tpi RHT. 1 1/8" x 12 Tpi RHT.
- Oliver / Yates American (?) Lathe 6" Faceplate 1 1/8" x 8 Tpi RHT (101953) - 1 1/8" x 8 Tpi RHT. Lathe 6" Faceplate.
- Back Plate (Dia 65 Mm - M12 X 1) Supplied With 3 X Tnuts + Bolts - Usa Fulfilled - TOOL STEEL QUALITY BACK PLATE FOR ROTARY TABLES TO MOUNT CHUCKS (SUPPLIED WITH RELEVANT 3 X TNUTS +BOLTS)-ENGINEERING TOOLS (DIA 65 MM- M12 X 1). MADE OF TOOL STEEL. PRECISELY MACHINED. MOUNTING THREAD IS M12 X 1.
- Oliver (?) Lathe 7" Faceplate 1 3/8" x 8 Tpi RHT (101932) - 1 3/8" x 8 Tpi RHT. Oliver (?). Lathe 7" Faceplate.
- Oliver / Yates American (?) Lathe 6" Faceplate 1 1/8" x 8 Tpi RHT (101933) - 1 1/8" x 8 Tpi RHT. Lathe 6" Faceplate.
- Back Plate For Rotary Tables To Chucks +3X T-Nuts(Dia 100 Mm- Recess 70 Mm)
- Back Plate For Rotary Table To Mount Chuck (DIA 125mm-RECESS 99mm)-Ship From USA - Back Plate For Rotary Table To Mount Chuck (DIA 125mm-RECESS 99mm). RECESS IS 95 MM. 3 x 8 MM THREADED DRILLS TO MOUNT A 3 JAW CHUCK & M8 COUNTER BORED TO ATTACHED THE BACK PLATE WITH THE ROTARY TABLE'S T SLOT.
- 4" Diameter Lathe Face Plate/Dog Plate 1-1/8" x 12 TPI - 4" face plate in good shape.
- 4" Diameter Lathe Face Plate 1-1/8" x 12 TPI - 4" face plate, some voids in the casting.
- Gibraltar (93221364) 2 –1/4 – 8 Adapter Back Plate for 6 " Diam Lathe Chucks - Gibraltar Item Number: 93221364. Manufacturer: Gibraltar. Item(s) described above and exactly what's pictured.
- Bison (7-872-312) 8293-12-1/2" 3MT Base Plate for for 12" Scrolls Chucks - Morse Taper - 3MT. Manufacturer: Bison. Bison Item Number: 7-872-312. For Chuck Size - 12". Item(s) described above and exactly what's pictured.
- Gibraltar (FL11S 325/23/86) 2-3/8 - 6 Adapter Back Plate for 12″ Lathe Chucks - Gibraltar Item Number: FL11S 325/23/86. Manufacturer: Gibraltar. Nominal Chuck Size - 12.
- Lathe A1 Series Plate 11” - Lathe A1 Series Plate 11”. See all pictures for the best description. Check out my other listings as well. Thank you for looking
- 10" with 2.25x8 TPI Slotted Lathe Face Plate
- 6" with 2.25x8 TPI Lathe Backing Plate
- 8" with 2.25x8 TPI Lathe Cuck Backing Plate
- Phase II 221-366 Lathe Chuck Adapter Plate for 16" Rotary Tables/12" Chuck
- Oliver Lathe 3 1/2" Faceplate 6 TPI x 1 7/8" RHT (101891) ~A~ - 6 TPI x 1 7/8" RHT. Oliver lathe face plate ~A~.
- Toolmex 7-875-129 Type D Steel Back Plate for 12-1/2" SET-TRU Chuck - We are happy to help.
- Heavy 10 Lathe Adapter Plate 2 1/4-8 (5 1/2”) - Heavy 10 Lathe Adapter Plate 2 1/4-8 (5 1/2”). See all pictures for the best description. NOTE: It does have a small crack as seen in the last picture. Check out my other listings as well. Thank you for looking
- 27" Adapter Face Plate Adapter Faceplate for Lathe WBW 5650289 R8642F
- Shars 6" D1-5 Fully Machined Back Plate For 6" 4 Jaw Independent Lathe Chuck R - For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- Gibraltar Adapter Back Plate for 10" Diam Lathe Chucks 93219947 (G) - Nominal Chuck Size: 10. Adapter Back Plate. Mount: A1/A2-6.
- Gator Lathe Chuck Adapter Back Plate L1 - This is a steel L1 mount with a 6" 6 thread per inch 5/8" key tapered mount. The O.D. is 12 3/8" with a 10 1/4" register and 5/8 bolt holes. It has never been used. The wrong size was ordered.
- Gibraltar Adaptor Back Plate for 10" Lathe Chuck A1/A2-8 Mount
- Dia 125 Mm- Recess 95 Mm Back Plate Supplied With Relevant 3 X Tnuts +Bolts - TOOL STEEL QUALITY BACK PLATE FOR ROTARY TABLES TO MOUNT CHUCKS (SUPPLIED WITH RELEVANT 3 X TNUTS +BOLTS)-ENGINEERING TOOLS (DIA 125 MM- RECESS 95 MM). RECESS IS 95 MM. 3 x 8 MM THREADED DRILLS TO MOUNT A 3 JAW CHUCK & M8 COUNTER BORED TO ATTACHED THE BACK PLATE WITH THE ROTARY TABLE'S T SLOT.
- Bback plate for rotary tables to mount chucks dia 65 mm- M14 x 1-USA FULFILLED - TOOL STEEL QUALITY BACK PLATE FOR ROTARY TABLES TO MOUNT CHUCKS (SUPPLIED WITH RELEVANT 3 X TNUTS +BOLTS)-ENGINEERING TOOLS (DIA 65 MM- M12 X 1). THE OTHER SIZE OF THE PLATE HAS A LOCATING SPIGOT OF 13.9 MM, THAT SITS IN THE CENTER OF THE ROTARY TABLE.
- 10 in D 1-6 Mount chuck backplate - 7/8 camlock pins.
- C-118 Chuck L-0 Mounting Plate For Buck 7-1/2" Dia, Ajust-Tru 4-Jaw Chuck L0, Lo - L-0 MOUNT, L0, 4.5" THREAD O.D. FOR 7-1/2" DIA. BUCK 4 JAW AJUST-TRU CHUCKS. CAN ALSO BE USED ON SIMULAR CHUCKS. CHECK DIMS. C-118 BUCK 7-1/2" DIA, L-0 MOUNTING PLATE FOR AJUST-TRU 4-JAW CHUCKS, ADAPTER PLA TE, SPINDLE MOUNT.
- Bison-Bial A2-6 Type A Steel Body Adapter Plate for 8" Power Chucks - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production.
- 1.875" Thick Aluminum Chuck Plate 57.5" Diameter Workholder perfect for a Clock! - 1.875" Thick Aluminum Chuck Plate 57.5" Diameter Workholder perfect for a Clock!. This would make a bad @$$ clock if someone wanted to put the time into it! This listing is for the top piece of material pictured, nothing underneath Message me with any questions Thank you for viewing my listing! Austin
- 8" Diameter L0 Lathe Drive Dog Face Plate
- 80 Mm 3 Jaw Self Centering Chuck With Back Plate - Hand wheel is graduated in divisions of 10 min & can be set to zero. Provided with oil nipple for oiling of inside body. Setting grub screw to dial and adjust the table to horizontal flat @ 0 degree is being given along with a locking screw to lock the table at the desired position.
- Back Plate For Rotary Table To Mount Chucks T-Nuts Bolts - QUALITY 80 MM TOOL STEEL BACK PLATES FOR 3"/ 4" ROTARY TABLE TO MOUNT A 3 JAW SELF CENTERING CHUCK ON THEM. THE OTHER SIZE OF THE PLATE HAS A LOCATING SPIGOT OF 13.9 MM, THAT SITS IN THE CENTER OF THE ROTARY TABLE.
- Chucks for rotary table & workholding lathe machine tools - Quality precision caste iron body 50 mm 3 jaws self chucks with tool steel hardened jaws. Quality precision caste iron body 50 mm 4 jaws self chucks with tool steel hardened jaws. Quality precision 65 mm caste iron body chucks with tool steel hardened jaws.
- Spindle Adapter v5/8" (5/8"Spindle to M14x1Thraed 70 mm 4 Jaw Independent Chuck)
- Spindle Adapter 5/8" to M14x1 Thread with 65mm 3 Jaw Self Centering Chuck Lathe
- M14x1 back plate of diameter 70mm &T nuts for 3" & 4" rotary table Lathe Machine
- Back Plate For Rotary Tables With 3XTnuts+Bolts Dia 65 Mm- M14X1-USA FULFILLED - Tool Steel Quality Back Plate For Rotary Tables To Mount Chucks (Supplied With Relevant 3 X Tnuts +Bolts)-Engineering Tools -(Dia 65 Mm- M14 X 1) USA FULLFILED. THE OTHER SIZE OF THE PLATE HAS A LOCATING SPIGOT OF 13.9 MM, THAT SITS IN THE CENTER OF THE ROTARY TABLE.
- 9" Face Plate Faceplate for Lathe
- Shars 8" Semi-Machined Back Plate D1-4 For All Plain Back Lathe Chuck New # - For back plate you would need to drill mounting holes and turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- Shars 8.89" D1-8 Fully Machined Back Plate For 12" 4 Jaw Independent Chucks R - The size of back plates's D1 should be a little bit smaller than the size of Chuck's D1. Because the gap between back plate and chuck is smaller, chuck's TIR is better. For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- Shars 8.07" D1-6 Fully Machined Back Plate For 12" 4 Jaw Independent Chucks R - The size of back plates's D1 should be a little bit smaller than the size of Chuck's D1. Because the gap between back plate and chuck is smaller, chuck's TIR is better. For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- 8" D1-3 Back Plate For 8" 3 and 6 Jaw Zero-Set Lathe Chucks Need Machine D1 - You would not need to drill any mounting holes but you will need to turn the shoulder down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle.
- 10" D1-4 Back Plate For 10" 3 and 6 Jaw Zero-Set Lathe Chucks Need Machine D1 R - You would not need to drill any mounting holes but you will need to turn the shoulder down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle.
- BUCK CHUCK COMPANY Adapter Back Plate for 10″ Diam Self Centering Lathe Chucks - Chuck Compatibility Self-Centering Chucks. Spindle Nose Type D Series. Nominal Chuck Size 10in. Mount Type D1-6. Mount D1-6.
- Cushman 12" 3-jaw power CNC chuck A2-8 mount 20-670-12 A08A 12Z w/ draw tube - Draw tube is part # 10130-1 A10561 3219-5001. Does not include any mounting bolts. Chuck weighs about 110lbs.
- PBA Adapter Plate For 10" Chucks For Use With PBA SETRITE and EASY-SET Chucks - ADAPTER PLATE FOR 10" LATHE CHUCKS. For Use WithSetrite™ Type Lathe Chucks. Chuck Size10". TypeAdapter (Back Plate). Model #1005012.
- 6" DOG DRIVE LATHE FACE PLATE / CATCHPLATE w/ 2-1/4"-8 TPI THREADED MOUNT - This is a 6" Dog Drive Lathe Face Plate / Catch Plate w/ 2-1/4"-8 TPI Threaded Mount. Threaded Mount: 2-1/4"-8 TPI. Plate Thickness: 1.03". Thru Hole: 2.09".
- Bison D1-11 Type D Camlock Finished Adapter Plate for 25" SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production. 25" D1-11 6 1-3/16" 16.02 9.25 7.75055 7.590 - 13.071 3/4-10 - 1.73.
- Bison D1-6 Type D Camlock Finished Adapter Plate for 10" SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production. 10.0" D1-6 6 7/8" 9.84 5.25 4.1878 2.992 5.708 8.819 M12 x 1.25. 75 2.09.
- Bison-Bial A1/A2-4 Type A Finished Adapter Plate for 5" SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production.
- Bison Adapter Plate For 15" Self Centering Lathe Chucks 7-630-016 - ADAPTER BACK PLATE FOR 15" SELF CENTERING LATHE CHUCKS. Compatible Chuck Size 16″ Depth 17.72″. Type Standard Base Plate Width of Inner Circle 0.669″.
- Bison Fully Machined Set-Tru Adapter Plate For 20" Chucks D-8 Mount 7-875-208 - FULLY MACHINED SET-TRU ADAPTER PLATES FOR 20" CHUCKS. MOUNT: D-8.
- BTC Adapter For Zero Set #AS350 For 15" Chucks A-15 Mount - For Chuck Types : Zero Set. Mount : A-15.
- Bison Fully Machined Set-Tru Adapter Plate For 16" Chucks D-6 Mount 7-875-166 - FULLY MACHINED SET-TRU ADAPTER PLATES FOR 16" CHUCKS. MOUNT: D-6.
- Bison Fully Machined Set-Tru Adapter Plate For 16" Chucks DIN8 Mount 7-920-168 - MOUNT: DIN8. FULLY MACHINED SET-TRU ADAPTER PLATES FOR 16" CHUCKS.
- Bison Set-Tru Adapter Plate For 20" Lathe Chuck A2-15 Mount 7-874-215 - SET-TRU ADAPTER PLATE FOR 20" LATHE CHUCKS. Type Adapter Plate Chuck Campatibility Set-Tru. For Chuck Size 20″. Mount A-15 For Use With A-1 & A-2 Spindles.
- 10" Okuma Kitagawa Back Plate Adapter - This belonged to a japanese okuma LB late 90s.
- SamSchully 12” Adapter plate AP15A11-22T - Brand new SamSchully 12” spindle nose Adapter plate AP15A11-22T. This is brand new item as you see in the pictures, never been on any machine and the sale is final! I won’t take return for any reasons. Thank you so much
- Wood Lathe Flange Face Plate Reliable Durable Threaded Turning Machine Chuck - 1 x Wood Lathe Flange Face Plate. Material: All steel. Thread Size（Optional）.
- Tool steel quality back plate for rotary tables to mount chucks. - Quality 80 Mm Tool Steel Back Plates For 3"/ 4" Rotary Table To Mount A 3 Jaw Self Centering Chuck On Them. The Other Size Of The Plate Has A Locating Spigot Of 13.9 Mm, That Sits In The Center Of The Rotary Table.
- 12 1/4" x D1-8 LATHE CHUCK BACK PLATE face dog driver metal engine holder tool - Good used lathe chuck back plate.
- Lathe Chuck 125 mm Backplate in 1-1/2"x 8 Lathe Machine Tools - You can simply turn the size as per your chuck to be mounted. Size is 125 mm. Manufactured from High close grain cast Iron. BACK PLATE:-.
- Lathe Chuck 125 mm Backplate in 1-1/2"x 8 Lathe Machine Tools@ - You can simply turn the size as per your chuck to be mounted. Size is 125 mm. Manufactured from High close grain cast Iron. BACK PLATE:-.
- Lot Of 4 Steel Face Plate 1"-8 Threaded for Wood Lathe Turning 3" - For sale is a lot of 4 chrome Steel Face Plates 1"-8 Threaded for Wood Lathe Turning 3". Storage Ewhselvmetrorack3
- Adapter Kit for 10" Rotary Table to 8" Self-Centering Chuck with MT3 Shank - Adapter kit includes adapter plate and MT3 (Morse Taper 3) shank. Adapter kit for mounting 10" Rotary Table to 8" Self-Centering Chuck (such as 3-jaw, 4-jaw, and 6-jaw chucks).
- Leblond Lathe L-1 Mount 8" Dog Drive Plate Face Plate
- New D 1 3 Faceplate Mount 5 "Monarch / Other
- New D 1 3 Faceplate Mount 7 "Monarch / Other
- Chucks for Rotary Tables & Lathe Machine Tools - Quality precision caste iron body 50 mm 3 jaws self chucks with tool steel hardened jaws. Quality precision caste iron body 50 mm 4 jaws self chucks with tool steel hardened jaws. Quality precision 65 mm caste iron body chucks with tool steel hardened jaws.
- Tool Steel Back Plate For Rotary Tables Dia 100 Mm- Recess 70 Mm Lathe - RECESS 70 MM. 3 X 6 MM THREAD DRILLS. M6 SIZE COUNTERED BORED SO THAT T NUTS SITS INSIDE THEM PERFECTLY. PLATE IS DRILLED IN A MANNER THAT IT CAN FIT TO BOTH A 3 AS WELL AS 4 SLOT ROTARY TABLE.
- Backplate 6 3/4" x 1 1/2" Thread (CTAM #8625) - Backplate 6 3/4" x 1 1/2" Thread.
- Lathe Back Plate 10" Diameter - LATHE BACK PLATE. 2' HOLE THRU CENTER.
- Pratt Burnerd 6" 3 Jaw Set Rite High Precision Chuck, D1-4 Mount - D1-4 MOUNT.
- Lathe Dog Drive Plate Chucks, L-1 Mount 9-1/2” - L-1 Mount ( Tread is 6” od).
- Tools Steel Back Plate For Rotary Table to Mount Chuck Machine Tools - QUALITY 80 MM TOOL STEEL BACK PLATES FOR 3"/ 4" ROTARY TABLE TO MOUNT A 3 JAW SELF CENTERING CHUCK ON THEM. RECESS IS 95 MM. 3 x 8 MM THREADED DRILLS TO MOUNT A 3 JAW CHUCK & M8 COUNTER BORED TO ATTACHED THE BACK PLATE WITH THE ROTARY TABLE'S T SLOT.
- 125 mm Backplate - Make Recess u need Lathe Chuck Caste Iron Machine Tools - Caste Iron Backplates for mounting collet chucks or alternative lathe chucks. Also as per the various chuck PCDs, it is also necessary to drill and possibly tap the backplate to accept whichever chuck is being mounted.
- 100 mm Back Plate Adaptor with Boxford Thread Designed Caste Iron Machine Tools - Boxford Thread (1-1/2" x 8 TPI). Very sturdy & well finished. Has Boxford Thread1-1/2" x 8 TPI to mount the chuck. Has Myford Thread 1-1/2 x 8 TPI to mount the chuck.
- 3-3/8" lathe faceplate or fixture plate 1"-8 machined steel, threaded holes
- Parker PS4213011CP End Plate Kit Size 3 Plug-In 5599-2 - We are happy to help.
- Heavy 10 South Bend Sfp-100L 5-1/2" Face & Dog Drive Plate 2 1/4"-8 Tpi - 2-1/4 x 8 TPI. Original South bend face plate sfp-100l for a heavy 10.
- Buck Chuck Adapter Back Plate for 8" Diam Self Centering Lathe Chucks B8-D6 - Chuck Compatibility Self-Centering Chucks. Spindle Nose Type D Series. Nominal Chuck Size 8. Adapter Back Plate. Mount D1-6.
- 2" HD Steel Wood Lathe Face Plate, 1" x 8tpi Threaded
- Pratt Burnerd America Adapter Back Plate for 12" Diam Lathe Chucks 1205023 - Chuck Compatibility: Self-Centering Chucks. Nominal Chuck Size: 12. Adapter Back Plate. 155 Center Ct, Venice, FL 34285.
- Genuine SYSTEM 3R Macro Machining Block & Hardinge 4° Taper 3R-610.21 Machinist - Genuine System 3R ( 3R-610.21 ) Manual Chuck in good used condition & attached to a Hardinge 4° Taper Back Plate. Utilizes 3R-605.2 Drawbars.
- Monarch 10EE 5" Dog Drive Plate - Monarch SN EE15181 - D1-3 Back - Excellent! - Monarch 10EE 5" Dog Drive Plate - D1-3 Back - Excellent condition. Monarch serial number EE15181.
- 8 7/8" Buck Metal Lathe Chuck Backing Plate 2-1/4” 8 TPI fits HEAVY 10 & 13 USA - Buck Metal Lathe Chuck Backing Plate 2-1/4” 8 TPI fits South Bend HEAVY 10 & 13. Logan. 8 7/8" diameter. Hole spacing 3.72" apart, 7 13/16" diagonally. I don't know the thread on 4 mounting holes. This backing plate fits good on my Heavy 10.
- 4″ Steel Wood Lathe Face Plate 1″ X 8Tpi Threaded Heavy Faceplate Rigid - Flat spots cut on back spigot for easy removal from lathe. 7/16" Thick Steel Faceplate - Heavy and Rigid. 2 set screws to lock to spindle for reverse turning. We're happy to help. New Arrivals. We do not accept P.O. Boxes.
- 2 pc Interstate Series 5C, 1/16 to 1-1/8" Collet Capacity, Horizontal Collet Blo
- 3"-8 Spindle Lathe Adapter Back Plate 4.5" Dia South Bend Hardinge Logan Atlas - This unit is 1-3/8" or 1.375" Thick.
- 7 1/2 " Lathe Face Chuck Plate W. L 1 Mount
- Buck Chuck Adapter Back Plate for 12" Diam Self Centering Lathe Chucks B12-D8 - Chuck Compatibility Self-Centering Chucks. Buck Chuck. Spindle Nose Type D Series. Nominal Chuck Size 12. Adapter Back Plate. Mount D1-8. 155 Center Ct, Venice, FL 34285.
- Bison Adapter Back Plate for 12-1/2" Diam Self Centering Lathe Chucks 7-875-128 - Chuck Compatibility Self-Centering Chucks. Bison Adapter Back Plate. Nominal Chuck Size 12. 155 Center Ct, Venice, FL 34285.
- D1-6 Type Adapter Plate for 16" Chucks - Item is new in crate. Application 16" Chuck. Only removed for photos. Body Material Steel.
- Bison Adapter Plate 8245-20-11 For D1-11 Spindle - Item is new in crate. SPINDLE NOSE TYPE: D SERIES. CHUCK COMPATIBILITY: SET- TRU MOUNT TYPE: D1-11.
- Bison Adapter Plate Adapter Plate 8245-20-11 For D1-11 Spindle - Removed from crate for photos only. SPINDLE NOSE TYPE: D SERIES. CHUCK COMPATIBILITY: SET- TRU MOUNT TYPE: D1-11.
- Bison Adapter Plate Adapter Plate 8245-25-8 For D1-8 Spindle - SPINDLE NOSE TYPE: D SERIES New in crate! CHUCK COMPATIBILITY: SET- TRU MOUNT TYPE: D1-8.
- Buck Chuck Backing Plate 2-1/4” 8 TPI fits South Bend HEAVY 10 5.75" diam T-955 - Metal Lathe Chuck Backing Plate 2-1/4” 8 TPI fits South Bend HEAVY 10 & 13. I don't know the thread on 6 mounting holes. This backing plate fits good on my Heavy 10.
- CUSTOM STEEL ADAPTER PLATE BACKING CNC LATHE A2-6 Spindle Nose - Custom made for direct mounting 2” thickin different OD.
- New KCM USA 12" Grip Set , Setrite, Adjust-Tru D1-6 Chuck Adapter Back Plate. - This sale is for one New Kalamazoo Chuck Manufacturing 12" Grip Set D6 Chuck Adapter Back Plate. Part number: HK1612GSD6 For Use With - SCA GripSet PBA Setrite EasySet Buck AjustTru Chucks The back plate is for 12" chucks but does not measure 12" accross. Has some spots of staining/oxidation ( easily cleaned with some very fine steel wool and elbow grease ) on the chuck side of the adapter otherwise brand new and ready for use. Please see pictures A scale shown is for size reference only and not part of the sale. We ship Wednesday through Friday and are happy to combine orders for shipping. Thank you for looking.
- NOS Bison Poland 8" Set-Tru 3 / 6 Jaw Lathe Chuck Back Plate Adapter D1-3 mount - New Old Stock Bison Poland 8" Set Tru Lathe Chuck Back Plate Adapter. D3 D1-3 mount. 8245-200/3;8"-3 New and Unused, but has scuffs and light marks to surface from decades of storage. The items are covered in dried packing grease. Please see pictures Please See additional Pictures Below the Description.
- Shop Fox D3754 Small 4-Jaw Chuck with Plate - Click here to see description.
- ER-40 Collet Chuck Plate Adapter 125MM D1-3 Spindle For Metal Lathe - Easily mount to a lathe with a D1-3 spindle. Features Collect Chuck.
- 130MM ER-32 Collet Chuck Mount Backplate Fixture Lathe and Milling - Mount to your choice of backplate to use on a lathe. Can also be used as a fixture on a milling table. Collet Not Included. 3 bolt holes.
- Unthreaded Backplate for 6" Lathe Chuck 3 or 4 jaw - UNTHREADED BACKPLATE/ADAPTER FOR 6 LATHE CHUCKS (3900-3313). Unthreaded Backplate/Adapter for 6″ Lathe Chucks. Machining is required before mounting your chuck to ensure concentricity. For 3 & 4-jaw chucks.
- Bison 8212 16" Lathe Chuck Adapter Back Plate - Nominal Chuck Size: 16".
- 3 Inch Lathe Faceplate Steel Wood Lathe Face Plate for 1Inch X 8 Tpi Spindle wit - Suitable For: It is perfect for all small bowl turning. We do not accept P.O. Boxes. We're happy to help. Product Material: It is made of 45steel which can ensure the durability of the product.
- Bison D1-11 Type D Camlock Finished Adapter Plate for 16" SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production. 15-3/4" D1-11 6 1-3/16" 11.75 9.25 7.75055 5.358 - 6.748 5/8-11 - 1.89.
- Bison D1-8 Type D Camlock Finished Adapter Plate for 10" SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production. 10.0" D1-8 6 1.0" 9.84 6.75 5.50075 2.992 5.708 8.819 M12 x 1.25. 75 2.36.
- Buck Chuck Company Adapter Back Plate 8" Dia Self Centering Lathe Chuck B8-D6 - Spindle Nose Type D Series. Nominal Chuck Size 8. Chuck Compatibility Self-Centering Chucks. Adapter Back Plate. Mount D1-6. 155 Center Ct, Venice, FL 34285.
- 1Set （2pcs）CNC Lathe Parts Lathe Brake Pads 6132 6140 For C6132A1 C6140A1 Tool - Suitable for C6132A1 C6140A1. Note: There are no screw holes on the brake pads.
- 1pc CNC 4" Precision Steel Face Plate / Screw Chuck for Easy Wood Lathe Turning - Color : Silver.
- 3pcs CNC 6" 1.9" 50mm B206 Clip Soft Steel Pointed Lathe Chuck Jaw Set Samchully - Lathe Chuck Size: 6 ". Jaw End Shape: Pointed. Jaw Mounting Type: 1.5mm x 60 Degree Serration. Jaw Shape: Square. Tooth pitch: 1.5 60 degrees. Center distance between screw holes: 20mm;. Hole Space: 0.787 "/ 20mm.
- 1pcs Steel SHARS 4" 5" 6" 8" B206 Clip CNC LATHE CHUCK SOFT TOP JAWS BORE Tool - The use of a molding ring in an old chuck can effectively improve the accuracy. Material: Steel alloy. Size: picture shows.
- 6" Steel Wood Lathe Face Plate, 1" x 8tpi Threaded With Locking Set Screw (for - Flat spots cut on back spigot for easy removal from lathe. 7/16" Thick Steel Faceplate - Heavy and Rigid. This is a well made, heavy faceplate. At 7/16" thick, it is rigid and well balanced. We want to provide you with the hottest deals on the internet.
- 6" Steel Wood Lathe Face Plate, 1-1/4" x RH 8tpi Threaded with set screw to lock - Flat spots cut on back spigot for easy removal from lathe. 7/16" Thick Steel Faceplate - Heavy and Rigid, 1-1/4" Thread Depth. 8 Offset Screwholes on 2 guide rings for easy centering. Locking set screw for use on reversing lathes.
- 8" Jaw B208 Type Part CNC Lathe Chuck Soft Jaw Bore Clamp Metal Work Steel Tool - Designed to fit 8" size B208 type or similar CNC power chucks and manual chucks in soft jaw machining. 3 independently adjustable pins fit into soft jaw's counterbore to allow for even pressure clamping on each, eliminating jaw lifting.
- 6" Jaw RING B206 FOR CNC LATHE CHUCK SOFT TOP JAWS BORE Bore Clamp Steel Tool - 3, After using the molding ring in the old chuck, it can effectively improve the precision and holding force. Hydraulic three-jaw chuck concentricity.
- 6" Jaw RING B206 FOR CNC LATHE CHUCK SOFT TOP JAWS BORE Bore Clamp Steel Tool - 3, After using the molding ring in the old chuck, it can effectively improve the precision and holding force. Hydraulic three-jaw chuck concentricity.
- 1PCS 12" Jaw Part Ring B212 For CNC Lathe Chuck Soft Jaws Bore Clamp Steel Tool - Designed to fit 8" size B212 type or similar CNC power chucks and manual chucks in soft jaw machining. Without discs or bungs used to clamp jaws, through boring of jaw is possible. 3 independently adjustable pins fit into soft jaw's counterbore.
- 8" Jaw Type Tool CNC Lathe Chuck Soft Jaw Bore Clamp Metal Work Steel B208 Part - Designed to fit 8" size B208 type or similar CNC power chucks and manual chucks in soft jaw machining. 3 independently adjustable pins fit into soft jaw's counterbore to allow for even pressure clamping on each, eliminating jaw lifting.
- L-0 Mount Buck Adjust-Tru Chuck Back Plate 8.115 " Dia. Hub 4.710" X .743" - L-0 MOUNT BUCK ADJUST-TRU CHUCK BACK PLATE # L-109 8.115 " DIA. HUB 4.710" X. 743".
- 6" Steel Wood Lathe Face Plate, 1-1/4" x RH 8tpi Threaded with set screws to ... - 6" Steel Wood Lathe Face Plate, 1-1/4" x RH 8tpi Threaded with set screws to lock on spindle for reverse turning. Flat spots cut on back spigot for easy removal from lathe (46mm). This is a well made, heavy faceplate.
- 3" HD Steel Wood Lathe Face Plate, 3/4" X 16TPI Threaded - Flat spots cut on back spigot for easy removal from lathe. 3" Thick Steel Faceplate - Heavy and Rigid. Color: Black 119. 4 Screw hOLES. Is Discontinued By Manufacturer: No. Item model number: 5106.
- 4" Threaded 1"-10 Backplate adapter for 3 Jaw Chuck - 4″ 1″~10 Threaded 3-Jaw Backplate. Must be machined for concentricity.
- 2" Steel Wood Lathe Face Plate, 3/4" x 16tpi Threaded - 3/8" Thick Steel Faceplate - Heavy and Rigid.
- 6” Buck Chuck Lathe C 20-2 Adapter Plate USA - Buck Chuck Lathe Adapter Plate USA. used .
- Manual Wood Lathe Chuck Flange Face Plate Steel Woodworking Turning Thread Tools - Steel Wood Lathe Chuck Face Plate. 1 x Manual Wood Lathe Chuck. Optional Thread size Made of Steel, Heavy and Rigid. M18 X 2.5mm. M18 2.5 faceplate includes 1 piece faceplate and 1 piece adapter.
- Buck 4" Ajust-Tru Chuck Mounting Plate 1.89" Dia Straight Mount - FOR 4" BUCK 3 & 6 JAWAJUST-TRU CHUCKS. CAN ALSO BE USED ON SIMULAR PRATT BURNERD CHUCKS. 2.12" DIA X. 58" HIGH ON 4" CHUCK MOUNTING SIDE. 1.89" DIA X 6.1" HIGH SPUD FOR GRIPPING. ALSO, (8). 217 DIA.
- Buck 6" Ajust-Tru Chuck Mounting Plate A5 Mount Ref. A-302 - BUCK 6" AJUST-TRU CHUCK MOUNTING PLATE A5 MOUNT (SIMULAR TO BUCK PART #A-302). FOR 6" BUCK 3 & 6 JAW AJUST-TRU CHUCKS. CAN ALSO BE USED ON SIMULAR PRATT BURNERD CHUCKS. 5.97" O.D., WITH 3.06" DIA. CHUCK MTG PUCK x 5/8" HIGH.
- 7 7/8” Buck Chuck #10742 Lathe D-8 Adapter Plate USA - 7 7/8” Buck Chuck #10742 Lathe D-8 Adapter Plate USA. Maybe used maybe new can’t tell.
- Buck Chuck D1-6 Adapter Back Plate for 10” Self Centering Chucks A10-D6 - Chuck Compatibility Self-Centering Chucks. BUCK CHUCK. Spindle Nose Type D Series. Nominal Chuck Size 10. Adapter Back Plate. Mount D1-6. June 29 2022. 155 Center Ct, Venice, FL 34285.
- 9-1/2" CNC LATHE FACEPLATE w/ A2-6 MOUNT - This is a CNC Lathe Faceplate w/ A2-6 Mount. Mount: A2-6.
- Buck Chuck Adapter Back Plate for 10" Dia Self Centering Lathe Chucks B10-A8 - Back Plate for 10" Dia Self Centering Lathe Chucks. Chuck Compatibility Self-Centering Chucks. Spindle Nose Type A Series. Nominal Chuck Size 10. Mount A1/A2-8. 155 Center Ct, Venice, FL 34285. Material Steel.
- Lathe Chuck Plate. 9.25" Diameter, 4.25" Center Opening, 1" Slots - LATHE CHUCK PLATE. Center opening: 4.25". We work hard to provide you with the lowest freight rates. Fork Lift or Loading Dock. Size: 9.25".
- 7 7/8” Buck Chuck #10742 Lathe D-8 Adapter Plate USA G6b - 7 7/8” Buck Chuck #10742 Lathe D-8 Adapter Plate USA G6a.
- Used 26” Diameter Steel Face Plate Drilled and Tapped -1.5” Thick - We have described this item to the best of our ability. Local pick up only.
- C-240 / C-203 Buck 6" Ajust-Tru Chuck Mounting Plate Di-3, Monarch, Hardinge - FOR 6" BUCK 3, 6 & 4 JAW AJUST-TRU CHUCKS. CAN ALSO BE USED ON SIMULAR PRATT BURNERD CHUCKS. AS A C-240, 4-JAW CHUCK MOUNTING PLATE. C-203 OR C-240 BUCK 6" AJUST-TRU CHUCK MOUNTING PLATE DI-3 SPINDLE MOUNT.
- 5" Buck A1 A2 Mount Lathe Back Plate Self Centering Chuxk A302 American Standard - LOOK AT ALL PICTURES FOR FULL DESCRIPTION COMES EXACTLY AS SHOWN IN PICTURES
- BUCK ADJUST-TRU Metal Lathe 6” Chuck Backing Mounting Plate Long Taper Key - LOOK AT ALL PICTURES FOR FULL DESCRIPTION READY TO INSTALL QUESTIONS OR CONCERNS FEEL FREE TO ASK AND I'LL DO MY BEST TO ANSWER ANY QUESTIONS 1/4" SIX OUTSIDE THREADED HOLES FREE SHIPPING TO THE LOWER 48 UNITED STATES INTERNATIONAL SHIPPING AVAILABLE PLEASE CONTACT SHOW ARRANGEMENTS COULD BE MADE COMES EXACTLY AS SHOWN IN PICTURES
- 8” L-00 Dog Drive Face Plate Chuck Backing Clausing Southbend Jet Leblond Logan - 8” L-00 tapered spindle Mount dog drive face plate.
- 3 1/2" Backplate (CTAM #7965) - 3 1/2" Backplate.
- Caste Iron 4" Inches (100 mm) Back Plate for Rotary Table Lathe Chuck Adapter - 4" / 100 mm Quality Caste Iron Back Plate. 4" /100 mm Quality Caste Iron Back Plate supplied with a 100 mm 3 Jaws self centering chuck. Caste Iron Chuck Body & Back Plate. Chuck's Jaws are made of Tool steel with Key.
- Chucks for Rotary Tables & Lathe Machine Tools Mini Chucks Workholding Machine - Chucks for Rotary Tables & Lathe Machine Tools. CHUCKS SIZE :-. Quality Precision Caste Iron Body 50 mm 3 Jaws Self Chucks with Tool Steel Hardened Jaws. Quality Precision Caste Iron Body Chucks with Tool Steel Hardened Jaws.
- Chucks for Rotary Tables & Lathe Machine Tools Mini Chucks Workholding Machine - Chucks for Rotary Tables & Lathe Machine Tools. CHUCKS SIZE :-. Quality Precision Caste Iron Body 50 mm 3 Jaws Self Chucks with Tool Steel Hardened Jaws. Quality Precision Caste Iron Body Chucks with Tool Steel Hardened Jaws.
- 9" DOG DRIVE LATHE FACE PLATE / CATCHPLATE w/ 2-3/4"-5 TPI THREADED MOUNT - This is a 9" Dog Drive Lathe Face Plate / Catch Plate w/ 2-3/4"-5 TPI Threaded Mount. Threaded Mount: 2-3/4"-5 TPI. Plate Thickness: 1-1/8". Thru Hole: 2-9/16".
- 4" HD Steel Wood Lathe Face Plate, 3/4" x 16tpi Threaded - Flat spots cut on back spigot for easy removal from lathe. 3/8" Thick Steel Faceplate - Heavy and Rigid. We'd love to hear from you! This is a well made, heavy faceplate. At 3/8" thick, it is rigid and well balanced.
- Adapter Plate w/ 3 Bolt Holes 8" Diameter - This item is sold 'as removed' from a running machine. We will help with trucking by using our nationwide network to get you the very best trucking rate. International Sales Warehouse Hours are M-F 7:30am - 4:30pm.
- Adapter Plate for 6.5" Chuck - This item is sold 'as removed' from a running machine. We will help with trucking by using our nationwide network to get you the very best trucking rate. Warehouse Hours are M-F 7:30am - 4:30pm.
- L-2 Back Plate-Driver Plate (CTAM #7927) - L-2 Back Plate-Driver Plate.
- 7 1/2" X 1 1/4 X 6 Thread Bore Backplate (CTAM #7914) - 7 1/2" X 1 1/4 X 6 Thread Bore Backplate.
- 9" Face Plate Faceplate for Lathe
- 8" Face Plate Faceplate for Lathe
- 8" Face Plate Faceplate for Lathe
- Bison D1-4 Type D Camlock Finished Adapter Plate for 6" SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production. 6-1/4" D1-4 3 5/8" 6.30 3.25 2.5005 1.654 3.385 5.512 M10 x 1.5. 63 1.81.
- 7" Driver Plate (CTAM #7860) - 7" Driver Plate. Includes Dog.
- 12 1/4" Face Plate 4 thread per Inch Mount 3 1/2 ThruHole 127 - We still have to go thru several warehouses as well. Most of the large machines are sold but the tooling is available. Racks and Racks of Cat 50, cat 40, cat 30 and many others. Checked out by professional workholding expert.
- 20" 4 T-Slots 8 Slot Faceplate D8 Mount 3 1/2" ThruHole 422 - If you are looking for a particular size let us know and we probably have it and can make a deal and will design a special ad for you. We still have to go thru several warehouses as well. Most of the large machines are sold but the tooling is available.
- 16" 8 Slot Faceplate D6 Mount 420 - If you are looking for a particular size let us know and we probably have it and can make a deal and will design a special ad for you. We still have to go thru several warehouses as well. Most of the large machines are sold but the tooling is available.
- 14" 12 Slot Faceplate D8 Mount 421 - If you are looking for a particular size let us know and we probably have it and can make a deal and will design a special ad for you. We still have to go thru several warehouses as well. Most of the large machines are sold but the tooling is available.
- 9-1/8” L-1 Mount Metal Lathe Dog Drive Plate Or Use As Face Chuck Backing Plate
- 9" L-1 Mount Metal Lathe Dog Drive Plate Or Use As Face Or Chuck Backing Plate
- 5" D1-3 Back Plate For 5" 3 and 6 Jaw Zero-Set Lathe Chucks Need Machine D1 R - You would not need to drill any mounting holes but you will need to turn the shoulder down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle.
- 5" Threaded Back Plate 2-1/4 x 8 TPI For 3 or 6 Jaw Zero Set Adjustable Lathe R - Fits lathe spindle with 2-1/4 x 8 TPI threads. LATHE CHUCK CATEGORY Back Plates Threaded Mounting. We have more LATHE CHUCKS available SPINDLE NOSE TYPE Threaded. High cast iron grade. You may ask for freight cost before buying tools.
- 5" Threaded Back Plate 1-1/2 x 8 TPI For 3 or 6 Jaw Zero Set Adjustable Lathe R - Fits lathe spindle with 1-1/2 x 8 TPI threads. LATHE CHUCK CATEGORY Back Plates Threaded Mounting. We have more LATHE CHUCKS available SPINDLE NOSE TYPE Threaded. High cast iron grade. You may ask for freight cost before buying tools.
- Set of 2 Maxwood 5106 HD 4" Steel Wood Lathe Face Plate, 1" x 8tpi Threaded New - Set of 2 X 4" Heavy Duty Face Plate with 1" x 8tpi thread & set screw to lock on spindle for reversing lathes. Flat spots cut on back spigot for easy removal from lathe. 8 Screwholes offset on 2 guide rings for easy centering.
- 6"Lathe Dog Drive Plate with Threaded Mount - In working condition. 1-1/2" Thru hole and Thickness.
- 100 mm Back Plate Adaptor Myford Thread Designed for Rotary Table + T nuts - Very sturdy & well finished. Has Myford Thread 1-1/8 x 12 TPI to mount the chuck Plate is counter bored M8 Size in a manner that it can fit to. 100 mm Back Plate Adaptor with 1-1/8 x 12 TPI Thread Designed for Rotary Table +T Nuts.
- Gibraltar Adapter Back Plate for 10" Diam Lathe Chucks 93219947 - Nominal Chuck Size: 10. Adapter Back Plate. 155 Center Ct, Venice, FL 34285. Mount: A1/A2-6.
- 11.75" D1-11 Back Plate For 12" 3 & 6 Jaw Zero-Set Lathe Chucks Need Machine D1 - You would not need to drill any mounting holes but you will need to turn the shoulder down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle.
- NICE! 8" DOG DRIVE LATHE FACE PLATE w/ L00 MOUNT - This is an 8" Dog Drive Lathe Face Plate w/ L00 Mount. Mount: L00. Plate Thickness: 1-1/4". Thru Hole: 2-1/8".
- L-1 Dog Drive Face Plate Metal Lathe Backing Plate Clausing Leblond Pratt Etc - L-1 Mount dog drive face plate.Actual item pictured.Be sure to view our other items for more great tooling finds.
- Hardinge 2-3/16-10 Dog Drive Face Plate Metal Lathe Backing Plate Machinist Tool - Hardinge dog drive face plate.Actual item pictured.Be sure to view our other items for more great tooling finds.
- 8" Metal Lathe Chuck Adapter Faceplate A-313 - Metal lathe chuck back plate. Specifications: Size: 8" Diameter Through hole: 3" Locating Ring Diameter: 6-5/16" Inset Ring Diameter: 5-1/2" Spindle Mount: Unknown Condition: Good used Please contact us directly if you need overnight shipping! International Shipping with DHL Express is available for all items: Please contact for Quote Mullett Industrial Sales contact info: mark at mullettindustrialsales.com Office: [phone removed by eBay] Also please check out our website for FREE shipping!.
- BACK PLATE FOR ROTARY TABLES TO MOUNT CHUCKS (DIA 65MM-M14x1) Machine Tool - MADE OF TOOL STEEL. PRECISELY MACHINED. MOUNTING THREAD IS M12 X 1. M6 X COUNTERED BORED SO THAT T NUTS SITS INSIDE THEM PERFECTLY.SUPPLIED WITH 3 X T NUTS + BOLTS AS PER BACK PLATE 'S SIZE.
- BACK PLATE FOR ROTARY TABLES TO CHUCKS (DIA 125 MM- RECESS 95 MM) Machine Tool - RECESS IS 95 MM. 3 x 8 MM THREADED DRILLS TO MOUNT A 3 JAW CHUCK & M8 COUNTER BORED TO ATTACHED THE BACK PLATE WITH THE ROTARY TABLE'S T SLOT. SUPPLIED WITH 3 X T NUTS + BOLTS AS PER BACK PLATE 'S SIZE.
- 19In. Lathe Face Plate - IF YOU HAVE A ISSUE OR NEED TO. SO WE HAVE A CHANCE. TO MAKE IT RIGHT AND YOU HAPPY.
- Back Plate For Rotary Tables (Dia 65 Mm - M14 X 1)-(Usa Fulfilled) - MADE OF TOOL STEEL. PRECISELY MACHINED. MOUNTING THREAD IS M14 X 1. THE OTHER SIZE OF THE PLATE HAS A LOCATING SPIGOT OF 13.9 MM, THAT SITS IN THE CENTER OF THE ROTARY TABLE.
- A1-8 Short Taper Lathe Chuck Adapter Plate
- Gibraltar A Series Adapter Back Plate for 10" Chucks, A1/A2-8 - Lathe Chuck Adapter Plate. Spindle Nose Type: A Series. 155 Center Ct, Venice, FL 34285.
- 7" x L00 MOUNT LATHE DOG DRIVE PLATE face driver metal engine holder tool LOO - 7" dia x L00 mount. good used lathe dog drive plate.
- Adapter Back Plate for 10" Lathe Chucks A1/A2-5 Mount New - Nominal Chuck Size 10. Mount A1/A2-5. Gibraltar Item Number: 76784651.
- Adapter Back Plate For 12" Lathe Chucks A1/A2-6 Mount A Series Spindle - Spindle Nose Type: A Series. Nominal Chuck Size: 12. Adapter Back Plate. Mount: A1/A2-6. Gibraltar Item Number: 93219988.
- 11" Self Centering Chuck Adapter Back Plate with 4" Thru Hole
- 10" Self Centering Chuck Adapter Back Plate for Lathe - 10" Chuck Adapter Back Plate for Lathe.
- 10" Spindle Lathe Chuck Adapter Back Plate
- 24" Lathe Conversion Adapter Plate
- Bison (7-887-312) 12" Cast Iron Lathe Chuck Scroll Plate 10.1" OD - Manufacturer: Bison. Bison Item Number: 7-887-312. Material Cast Iron. Product Type Scroll.
- Bison (7-874-126) Adapter Back Plate for 12-1/2" Self Centering Lathe Chuck A2-6 - Manufacturer: Bison. Bison Item Number: 7-874-126. Spindle Nose Type A Series. Nominal Chuck Size 12. Chuck Compatibility Self-Centering Chucks. Material Steel.
- 10" Lathe Chuck Adapter Plate A1/A2-8 Mount Semi-Steel NEW - Spindle Nose Type A Series. Nominal Chuck Size 10. Mount A1/A2-8. Material Steel.
- 10" L1 Semi-finished adapter Plate for LATHE CHUCKS #ADP-10-L1SM-NEW - L1 Semi-finished threaded back plate for lathe chucks. Thread: L1 standard. Keyway slot finished by EDM wire cut.
- 20" BISON D1-11 Back Plate for SET-TRU Bison Chucks 7-875-209 - Set-Tru Scroll Chucks have 3 pinions, or 3 positions for the chuck wrench. Compare with other well-known chucks which only use a single pinion design. Bison's finest product. Bison SET-TRU Chucks can give your lathe the accuracy of a tool room lathe.
- Bison Adapter Rough Cast Back Plate for 32" Independent 4-Jaw Lathe Chucks - Rough Cast Adapter Backplate. Chuck Type Compatibility - 4-Jaw Independent. Chuck Size Compatibility - 32”. Will there be a loading dock or forklift. Material - Cast Iron. 155 Center Ct. Venice, FL 34285.
- Tool Steel Back Plate For Rotary Tables (Dia 65 Mm- M12X1) - (Usa Fulfilled) - TOOL STEEL BACK PLATE FOR ROTARY TABLES (DIA 65 MM- M12X1). THE OTHER SIZE OF THE PLATE HAS A LOCATING SPIGOT OF 13.9 MM, THAT SITS IN THE CENTER OF THE ROTARY TABLE. (USA FULFILLED). MADE OF TOOL STEEL.
- 14" Face Plate Faceplate for Lathe
- Buck L-0 Tapered Spindle Mount Backing Plate L-144 Fr 12” Metal Lathe Chuck 1312 - Buck L-0 Tapered Spindle Mount Backing Plate L-144 For 12” Metal Lathe Chuck no. 1312.Actual item pictured.Be sure to view our other items for more great tooling finds.
- New Bison Poland 12-1/2" Set-Tru L-0 L0 Lathe Chuck Adapter Back Plate $594 - New Bison Poland 12-1/2" Set-Tru Lathe Chuck Adapter Back Plate. L0 L-0 mount. Comes covered in packing grease as can be seen in the pics. Please See additional Pictures Below the Description.
- New Pratt Burnerd Set-Rite D1-4 Adapter Back Plate for 10" 3 & 6 Jaw Lathe Chuck - This sale is for one New Pratt Burnerd 10" Set-Rite Chuck D1-4 Adapter Back Plate. This plate does NOT MEASURE 10" across it is for 10" CHUCKS. DESCRIPTION: Mounting Plate for Setrite Chucks (3 & 6 Jaw, 253 & 263 Series) PRODUCT SPECIFICATIONS BRAND PBA MODEL # 1005021 CHUCK SIZE 10" SPINDLE D1-4 FOR USE WITH Setrite™ Type Lathe Chucks.
- 8" Face Plate Faceplate for Lathe
- 8" Face Plate Faceplate for Lathe
- 14" Face Plate Faceplate for Lathe
- 8" 4-Jaw Self-Centering Lathe Chuck top&bottom jaws w. D1-5 adapter plate-new - 8" - 4 jaw self-centering lathe chuck with D1-5 back mounting adapter plate. with 2pcs top & bottom tongue groove reversible jaws. jaws ground and hardened. STRAIGHT RECESS OR PLAIN BACK SPINDLE MOUNTING.
- New Bison Poland 10" Set-Tru Lathe CHUCK Backplate Adapter for Rotary Table - New Bison Poland 10" Set-Tru Lathe CHUCK Backplate Adapter for Rotary Table. Part number: 8298-10" These are no longer available from Bison so get one while you can. Please See additional Pictures Below the Description.
- 14" Face Plate Faceplate for Lathe
- BACK PLATE FOR ROTARY TABLES TO MOUNT CHUCKS WITH 3 X T-NUTS (DIA 65MM-M12x1) - M6 X COUNTERED BORED SO THAT T NUTS SITS INSIDE THEM PERFECTLY.SUPPLIED WITH 3 X T NUTS + BOLTS AS PER BACK PLATE 'S SIZE. MADE OF TOOL STEEL. PRECISELY MACHINED. MOUNTING THREAD IS M12 X 1. THE OTHER SIZE OF THE PLATE HAS A LOCATING SPIGOT OF 13.9 MM, TH.
- Back Plate For Rotary Tables To Chucks +3X T-Nuts (Dia 80Mm-Recess 55)(Hv4/Hv6) - RECESS 55 MM. 3 X 6 MM THREAD DRILLS. M6 SIZE COUNTERED BORED SO THAT T NUTS SITS INSIDE THEM PERFECTLY. HAS A MT2 EXTENSION SPIGOT ON OTHER SIDE THAT SITS IN THE MT2 CENTER BORE OF THE ROTARY TABLE.
- Back Plate For Rotary Tables To Chucks +3X T-Nuts (Dia 80Mm-Recess 55) - RECESS 55 MM. 3 x M6 THREAD DRILLS. SUPPLIED WITH 3 X T NUTS + BOLTS. QUALITY 80 MM TOOL STEEL BACK PLATES FOR 3"/ 4" ROTARY TABLE TO MOUNT A 3 JAW SELF CENTERING CHUCK ON THEM. M6 X COUNTERED BORED SO THAT T NUTS SITS INSIDE THEM PERFECTLY.
- Myford 7" Faceplate Face Plate 73 1129 - EVERYTHING IS IN GREAT CONDITION SHOWS LITTLE SIGNS OF WEAR AND TEAR PLEASE LOOK AT ALL PICTURES FOR THE FULL DESCRIPTION OF THE ITEM QUESTIONS OR CONCERNS FEEL FREE TO ASK AND I WILL TRY TO ANSWER THEM TO MY BEST ABILITY THANK YOU AND HAVE A GOOD DAY COMES EXACTLY AS SHOWN IN PICTURES COULD USE LIGHT TO MODERATE CLEANING WAS ACQUIRED WITH A LARGE GROUP OF PARTS WILL FIT SUPER 7 ML7
- D1-6 Back Plate, 7-3/4" Diameter - D1-6" back plate with 3 pins, in good condition. Has a threaded hole that could also be used for drive dogs.
- 100 mm Back Plate Adaptor with Boxford Thread Designed Caste Iron Machine Tools - Boxford Thread (1-1/2" x 8 TPI). Very sturdy & well finished. Has Boxford Thread1-1/2" x 8 TPI to mount the chuck. Has Myford Thread 1-1/2 x 8 TPI to mount the chuck.
- 125 mm Backplate - Make Recess u need Lathe Chuck Caste Iron Machine Tools - Caste Iron Backplates for mounting collet chucks or alternative lathe chucks. Also as per the various chuck PCDs, it is also necessary to drill and possibly tap the backplate to accept whichever chuck is being mounted.
- 6” BACK PLATE ADAPTER with 4 MOUNTING HOLES - Screw Head Opening: 1/2". Condition: New, unused (see photos); any surface marks are due to storage. RASHEL DESIGN LLC d.b.a. Add us to your favorites, for regular updates on new treasure finds. (2437) All photos are of the actual product(s) you will receive and are intended to help describe the quality and condition of the piece(s).
- SouthBend Metal Lathe Chuck 7” Backing Plate HEAVY Atlas Logan - SouthBend Metal Lathe Chuck Backing Plate. 7” diameter. 2.5” hole3 post mount. 2 7/8” center to center.New old stock. Could use a good cleaning. Been sitting in the shop for years in a box.
- 6-1/4" CNC LATHE WORKHOLDING FACEPLATE w/ A2-5 MOUNT - Mount: A2-5.
- Bison D1-6 Type D Camlock Finished Adapter Plate for 16" SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production. 15-3/4" D1-6 6 7/8" 11.75 5.25 4.1878 4.055 - 6.748 5/8-11 - 1.38.
- Bison D1-5 Type D Camlock Finished Adapter Plate for 10" SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production. 10.0" D1-5 6 3/4" 9.84 4.13 3.2503 3.130 5.708 8.819 M12 x 1.25. 75 1.50.
- Bison D1-3 Type D Camlock Finished Adapter Plate for 8" SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production. 8.0" D1-3 3 9/16" 7.87 2.78 2.1250 2.024 4.330 6.929 M10 x 1.25. 67 1.30.
- Bison D1-4 Type D Camlock Finished Adapter Plate for 8" SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production. 8.0" D1-4 3 5/8" 7.87 3.25 2.5005 2.165 4.330 6.929 M10 x 1.25. 67 1.30.
- Bison D1-5 Type D Camlock Finished Adapter Plate for 8" SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production. 8.0" D1-5 6 3/4" 7.87 4.13 3.2503 2.165 4.330 6.929 M10 x 1.25. 67 1.85.
- Bison D1-5 Type D Camlock Finished Adapter Plate for 6" SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production. 6-1/4" D1-5 6 3/4" 6.30 4.13 3.2503 1.654 3.385 5.512 M10 x 1.5. 63 1.81.
- Bison D1-4 Type D Camlock Finished Adapter Plate for 5" SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production. 5.0" D1-4 3 5/8" 4.92 3.25 2.5005 1.378 2.164 4.252 M8 x 1.25. 55 1.54.
- Lathe Chuck backing Plate
- Buck 10 Inch A1-6 Adjust Tru Back Plate 1-495-A312 - Our part number on this one is 1-495-A312.
- Hertel 8" D6 STL Lathe Chuck Adapter Plate Pre-Machined INCOMPLETE 12819041 - Model: 12819041. Spindle Nose Type D Series. Nominal Chuck Size 8. Chuck Compatibility Plain Back Self-Centering. Cab E Bin 12. Material Steel.
- Bison 16" Back Plate C-Taper for SET-TRU Bison Chucks 3-7232-0125 (LOC367) - MPN: 7-920-168.
- Bison (7-874-126) Adapter Back Plate for 12-1/2 Lathe Chucks A2-6 Mount - Chuck Compatibility Self-Centering Chucks. Nominal Chuck Size 12. Mount A2-6. Our 1st ID was "tcitytrans" which is still active. Product ID "42556.
- Shop Fox D3754 2-3/4 Inch 4 Jaw Lathe Chuck With Screw On Pedestal Back Plate - Small 4 Jaw Chuck With Plate. Screw-on pedestal back plate. Chuck jaws are clearly numbered for ease of use. Use on 3" or 4" rotary table. 9/16" center hole. Saves Us All A Lot Of Hassle And Everyone Is Happy.
- Buck Chuck Adapter Back Plate for 12" Dia Self Centering Lathe Chucks B12-D6 - Chuck Compatibility Self-Centering Chucks. Buck Chuck. Spindle Nose Type D Series. Nominal Chuck Size 12. Adapter plate ONLY. Mount D1-6. Amanda December 31 19.
- Bison-Bial 8.0" A2-5 Type A Finished Steel Adapter Plate for SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production.
- Vintage 13” Machinists Lathe Chuck Back Face Plate Mount Adapter Cam Lock K823 - This was found in a local machine shop that went out of business. It is very heavy. VTG 13” Machinists Lathe Chuck Back Face Plate Mount Adapter Threaded CK 10915. Condition is "Used". Shipped with USPS Priority Mail.
- VTG 10" Machinists Lathe Chuck Back Face Plate Mount Adapter Cam Lock Backing - This was found in a local machine shop that went out of business. It is very heavy. VTG 10" Machinists Lathe Chuck Back Face Plate Mount Adapter Threaded CK 10915. Condition is "Used". Shipped with USPS Priority Mail.
- PBA Setrite Adapter Back Plate for 10" Self Centering Chucks D1-8 Mount 1005024 - Setrite Adapter Plate. For use w/ - Setrite 10" Self Centering Chucks. Mount - D1-8. 155 Center Ct.
- Bison-Bial A2-5 Type A Steel Body Adapter Plate for 5" Power Chucks - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production.
- Buck D1-8 C244 Backing Plate For 12” 4 Jaw Metal Lathe Chuck 1312 Mounting Plate - Condition is "Used".
- New Kalamazoo Chuck USA 12" L-0 L0 Grip Set / Adjust Tru lathe Chuck Back Plate - This sale is for New Kalamazoo Chuck Manufacturing 12" Grip Set Chuck Adapter Plate. L-0, L0. Made in USA. This unit is made for a 12" chuck but actually measures less than 8". Pleasee see pics. For Use With -SCA GripSet PBA Setrite and EasySet Buck AjustTru Chucks.
- Bison 8 Inch D1-4 Back Plate for SET-TRU Adjustable Chucks 7-875-084 - Bison Chuck Adapter Back Plate for 8" Diameter Self Centering Lathe Chucks. D1-4 Mount, 2.165" Through Hole Diam, 4.33mm ID, 7.87" OD, 0.63" Flange Height. Material: Steel.
- 17" Face Plate Faceplate for Lathe
- New Pratt Burnerd 8" SETRITE Chuck Adapter Plate. 2-1/4" x 8 TPI back. 0805043 - New Pratt Burnerd 8" SETRITE Lathe Chuck Adapter Back Plate. 2-1/4" x 8 TPI back. Part number: 0805043.
- New Bison 4" Set Tru Chuck Adapter Plate. 1" x 10 TPI Thread mount. Poland - New Bison 4" Set Tru Chuck Adapter Plate. 1" x 10 TPI Thread mount. Toolmex part number: 7-876-041, Bison Part number: 8285-4"-1"-10. Made in Poland.
- 4-3/16" Jacobs Rubberflex Chuck Adapter Plate For 2-3/4"- 8 Spindle #Ad50-86 - REMOVED FROM A MODEL 500 JACOBS RUBBERFLEX COLLET CHUCK. 4-3/16" CHUCK ADAPTER PLATE FOR 2-3/4"- 8 SPINDLE. THIS ADAPTER PLATE IS USED, BUT APPEARS TO BE IN VERY GOOD CONDITION. (6) 5/16"-24 TAPPED HOLES ON 2-13/16" DIA.
- 6-1/4" Bison #8250-6 1/4-L0 Set-Tru Chuck Adapter Plate L0 Spindle Taper Nos - 6-5/16" O.D. CHUCK ADAPTER PLATE. I BELIEVE IT IS BISON.
- 03-201-0007 10" Back Plate D1-8
- Lathe Faceplate/Driveplate - 14" OD with threaded Hub 2 3/4" X 4 TPI - The thread pitch was found to be 4 TPI using a thread gage. This value was then compared with those tabulated in Machinery's Handbook 23rd Edition page 1481. It was found to lie within the limits given for the 2 3/4" X 4 TPI entry.
- 1-1/2"-8 Finished adapter Plate for 8" self-centering LATHE CHUCKS #ADP-08-1128 - 1-1/2"-8 finished threaded back plate for 8" self-centering chucks either 3-jaw, 4-jaw or 6-jaw lathe chuck.
- 1-1/2"-8 Finished adapter Plate for 8" self-centering LATHE CHUCKS ADP-08-1128 - 1-1/2"-8 finished threaded back plate for 8" self-centering chucks either 3-jaw, 4-jaw or 6-jaw lathe chuck.
- 8-1/2" OD Lathe Backing Plate with Drive Lugs: D1-6" Camlock Spindle
- 4NS Hardinge COLLET (lot of 40 Collets) - 4NS Hardinge COLLET (lot of 40 Collets). Condition is "Used". Shipped with USPS First Class.
- Gibraltar D11 Lathe Chuck Adapter Plate for Gibraltar 12" Chuck 93220002 - Model: 93220002. Adapter Back Plate for 12" Diam Lathe Chucks. Amanda October 13 20.
- Poland Centering 3 Jaw Lathe Chuck 16" Dia. D1-8 Back Plate 5" Spindle Hole - Poland Self Centering 3 Jaw Lathe Chuck 16" Dia. D1-8 Back Plate 5" Spindle Hole. Jaws open and close as the should. Still works as it should.
- #4 Ns Center Driver Faceplate (H-4-10-4-23) - (H-4-10-4-23) THIS IS A USED CENTER DRIVER FITTING A #4NS COLLET SEAT. IF YOU NEED MORE THAN WE HAVE LISTED, LET US KNOW AND WE’LL SEE IF WE CAN ACCOMMODATE YOUR NEEDS.
- 7" Metal Lathe Chuck Dog Driver Faceplate 13/16" Round Arbor - Metal lathe dog driver plate. Specifications: Size: 7" Diameter Spindle Mount: 13/16" Round Condition: Good used Please contact us directly if you need overnight shipping! International Shipping with DHL Express is available for all items: Please contact for Quote Mullett Industrial Sales contact info: mark at mullettindustrialsales.com Office: [phone removed by eBay] Also please check out our website for FREE shipping!.
- Hardinge 3/8" Chnc Ii Lathe 8-Station Turret Top Plate - Condition is "Used".
- Morse Taper #3 (3MT) Shank Headstock Adapter Sleeve: #2 Bore (2MT), 2-1/2" OAL
- Myford Backplate 125Mm 5'' Diameter Cast Iron 1-1/8" X 12 By Rdgtools - 5" / 125MM MYFORD THREADED BACKPLATE. MADE FROM CAST IRON. PLAIN BACK TO CREATE YOUR OWN LOCATING RECESS.
- 10" x 2.5" T-Slot Lathe chuck round Face Plate w/ 6.5" Register & 6x 3.5" slots - 10" x 2.5" T-Slot Lathe chuck round Face Plate w/ 6.5" Register & 6x 3.5" slots. Condition is Used. Apo fpo po box ak hi pr shipping extra NOTE: pics 2-4 are current condition due to condensation in store room
- L-1 Drive Plate, 9 Inch
- 9-1/2” LATHE DOG DRIVER FACE PLATE with L1 MOUNT, 8 TPI - 9-1/2” LATHE DOG DRIVER FACE PLATE with L1 MOUNT, 8 TPI; uses 5/8" key (not included). (2177) All photos are of the actual product(s) you will receive and are intended to help describe the quality and condition of the piece(s).
- 8" L1 Semi-finished adapter Plate for LATHE CHUCKS #ADP-08-L1SM-NEW - L1 Semi-finished threaded back plate for lathe chucks. Thread: L1 standard. Keyway slot finished by EDM wire cut.
- 10" L0 Semi-finished adapter Plate for LATHE CHUCKS #ADP-10-L0SM-NEW - 10" L0 Semi-finished threaded back plate for lathe chucks. Thread: L0 standard. Keyway slot finished by EDM wire cut.
- Placa Frontal De Acero De 1 "-8 Roscado Para Torneado De Torno De Madera (3") 4. - Precision machined face with 1 ring. Distanc of two hole center: 60mm.
- RAPIDHOLD 5" Base Plate for Plain Back F. Mount Chuck - HL11-57610 - NEW - We are working to provide great condition new and used tools. We love great communication. You are our priority.
- Js 3'' Lathe Dog Loc8792 - 3" LATHE DOG. TO MAKE IT RIGHT AND YOU HAPPY.
- Bison Adapter Back Plate for 8" Diam Self Centering Lathe Chucks 7-876-083 - Chuck Compatibility Self-Centering Chucks. Nominal Chuck Size 8. Spindle Nose Type Threaded.
- 16" Lathe Chuck Plate, Pin .875, Center To Center Of Pins: 2.590
- 25" Lathe Chuck Plate
- PHASE II 12"Adapter Plate for Phase II Rotary Tables
- Lathe Chuck 125 mm Backplate in 1-1/2"x 8 TPI Boxford thread Workholding Tool - Boxford thread- 1 1/2 X 8 TPI No rough recess is given, you can simply turn the size as per your chuck to be mounted. Size is 125 mm. Manufactured from High close grain cast Iron. BACK PLATE :-.
- BACK PLATE FOR ROTARY TABLES TO MOUNT CHUCKS (DIA 65MM-M14x1) TOOL USA FULFILLED - BACK PLATE FOR ROTARY TABLES TO MOUNT CHUCKS (DIA 65MM-M14x1) TOOL. (USA FULFILLED). MADE OF TOOL STEEL. PRECISELY MACHINED. MOUNTING THREAD IS M12 X 1. BACK PLATE :-. M6 X COUNTERED BORED SO THAT T NUTS SITS INSIDE THEM PERFECTLY.SUPPLIED WITH 3 X T NUTS + BOLTS AS PER BACK PLATE 'S SIZE.
- BACK PLATE FOR ROTARY TABLES TO MOUNT CHUCKS WITH 3 X T-NUTS (DIA 65MM-M12x1) - M6 X COUNTERED BORED SO THAT T NUTS SITS INSIDE THEM PERFECTLY.SUPPLIED WITH 3 X T NUTS + BOLTS AS PER BACK PLATE 'S SIZE. MADE OF TOOL STEEL. PRECISELY MACHINED. MOUNTING THREAD IS M12 X 1.
- Interstate Adapter Back Plate for 10" Diam Lathe Chucks 08607707 - Model: 08607707. Nominal Chuck Size 10. Amanda June 09 20.
- 100 mm back plate with MT2 spigot for HV4/ HV6 rotary table Lathe Machine Tool - Recess on the top as per chuck size of 100mm, while there is a MT2 spigot on the other side of back plate which sits and guided in the center hole of our HV4/ HV6 rotary table having MT2 bore. The back plate is drilled in a manner that it can fit both a 3 or 4 slot rotary table.
- 6" D1-3, D3 Semi-Finished adapter Plate for 6" LATHE CHUCKS #ADP-06-D3SM-NEW - Semi-finished D1-3, D3 cam-lock back plate for 6" lathe chuck. D1-3, D3 Cam-lock.
- 125 mm back plate with MT2 spigot for HV4/ HV6 rotary table - Recess on the top as per chuck size of 125mm, while there is a MT2 spigot on the other side of back plate which sits and guided in the center hole of our HV4/ HV6 rotary table having MT2 bore. The back plate is drilled in a manner that it can fit both a 3 or 4 slot rotary table.
- Value Collection Adapter Back Plate for 6" Diam Self Centering Lathe Chucks - Value Collection Adapter Back Plate for 6" Diam Self Centering Lathe Chucks D1-4 Mount
- Value Collection Adapter Back Plate for 8" Diam Self Centering Lathe Chucks - Value Collection Adapter Back Plate for 8" Diam Self Centering Lathe Chucks D1-4 Mount
- Bison Adapter Back Plate for 6-1/4" Diam Self Centering Lathe Chucks - Bison Adapter Back Plate for 6-1/4" Diam Self Centering Lathe Chucks 0.98" Through Hole Diam, 3.46mm ID, 6.7" OD, 0.98" Flange Height, Cast Iron
- Value Collection Adapter Back Plate for 8" Diam Lathe Chucks D1-5 Mount
- Value Collection Adapter Back Plate for 6" Diam Lathe Chucks D1-4 Mount
- 910345 BACK UP PLATE TAPER w 910302 RING
- 2”(?) - 7 TPI Metal Lathe Dog Drive Face Plate Possibly Reed Prentice Check Meas - Looks to be 2”(?). May Possibly fit (?). Condition is Used.
- Lathe Adapter Plate 8 1/4” - Lathe Adapter Plate 8 1/4” . Condition is Used. Shipped with USPS Priority Mail Medium Flat Rate Box.
- Interstate Adapter Back Plate for 10" Diam Lathe Chucks 08607715 - Model: 08607715. Nominal Chuck Size 10. Amanda April 13 20.
- 8” D1-5, D5 Semi-Finished adapter Plate for LATHE CHUCKS #ADP-08-D5SM-NEW - Semi-finished D1-5, D5 cam-lock back plate for lathe chuck. D1-5, D5 Cam-lock.
- L1 Lathe Chuck Mounting Plate with dog cuts-Used - Dog tapered width 1.250". Used:An item that has been used previously.
- Lathe Adapter Plate 8 1/4” - Lathe Adapter Plate 8 1/4” . Condition is Used. Shipped with USPS Priority Mail Medium Flat Rate Box.
- L00 L-00 Plastic Lathe Spindle Nose Protector Rockwell Logan Clausing Leblonde - L00 Metal Lathe Spindle Nose Protector Rockwell Logan Clausing Leblonde. Condition is New. Shipped with USPS First Class Package.
- Steel Face Plate 1"-8 Threaded for Wood Lathe Turning (3") 3" - 4 holes on plate to ease mounting of your work piece. Precision machined face with 1 ring. Distanc of two hole center: 60mm. Batteries Required?. Batteries Included?.
- 2" HD Steel Wood Lathe Face Plate, 1" x 8tpi Threaded - Click here to see description.
- Lathe Chuck 125 mm Backplate in 1-1/2"x 8 TPI Boxford thread Lathe Machine Tools - Boxford thread- 1 1/2 X 8 TPI No rough recess is given. you can simply turn the size as per your chuck to be mounted. Size is 125 mm. Manufactured from High close grain cast Iron. BACK PLATE:-.
- 6” D1-5, D5 Semi-Finished adapter Plate for LATHE CHUCKS #ADP-06-D5SM-NEW - Semi-finished D1-5, D5 cam-lock back plate for lathe chuck.Diameter: 6-1/4"/160mmThickness: 1"D1-5, D5 Cam-lock Made of steel.Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
- 6" 3-JAW SELF-CENTERING CHUCK top-bottom jaws w D1-5, D5 semi-finished adapter - 6" - 3 JAWS Self-Centering T.I.R.---0.003" w. D1-5, D5 semi-finishe adapter backing plate. TWO PCS TONGUE AND GROOVE REVERSIBLE HARDENED top & bottom JAWS. TOP QUALITY.
- BISON Lathe Chuck Adapter Back Plate: 16″ Chuck, for Self-Centering Chucks - Chuck Compatibility Self-Centering Chucks. Spindle Nose Type A Series. 155 Center Ct, Venice, FL 34285. Material Steel.
- Gibraltar Adapter Back Plate for 10" Lathe Chucks A2-8 Mount - For use w/ - 10" Lathe Chucks. Adapter Plate. Mount - A2-8. 155 Center Ct. Venice, FL, 34285.
- Bison-Bial 16" A2-6 Type A Finished Steel Adapter Plate for SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production.
- NEW BISON 8240-X-160-5 CAMLOCK ADAPTOR PLATE For lathe chuck - 100 % service. The real pictures of the product are provided. free cancellation. on eligible order.
- Gibraltar Adapter Back Plate for 6" Self Centering Lathe Chucks A1/A2-5 Mount - For use w/ - 6” Self Centering Lathe Chucks. Adapter Plate. Mount - A1/A2-5. 155 Center Ct. Venice, FL, 34285.
- Gibraltar Adapter Back Plate for 10" Self Centering Lathe Chucks D1-8 Mount - For use w/ - 10” Self Centering Lathe Chucks. Adapter Plate. Mount - D1-8. 155 Center Ct.
- Lathe Dog Drive Plate Chuck Backing Plate 9 TPI (1-3/4”?) Dimensions Pictured - Lathe Dog Drive Plate Chuck Backing Plate 9 TPI (?. possibly 1-3/4”?). Thread Gage shows 9tpi. Condition is For parts or not working, unknown exact thread. Actual item pictured.
- Buck Chuck Adapter Back Plate for 12" Lathe Chucks B12-D8 - Chuck Compatibility Self-Centering Chucks. Buck Chuck. Spindle Nose Type D Series. Nominal Chuck Size 12. CAB XC BIN 3. Mount D1-8. Amanda January 02 20. Scuffs throughout .
- Gibraltar 6" A5 Steel Lathe Chuck Adapter Plate 76784719 - Model: 76784719.
- Horton Model 150 8" X 8" X 3" 8" 4 Jaw Lathe Tool Chuck W/ Screw Back Plate - HORTON MODEL 150 8" X 8" X 3" 4 JAW TOOL LATHE CHUCK. LENGTH OF JAW : 3-1/2". CHUCK IS STILL IN GOOD WORKING CONDITION. SIZE OF CHUCK : 8". MODEL NUMBER : 150. 1-7/8" X 5TPI THREADED BACK PLATE. INFORMATION SEE PICTURE 2.
- 8 1/4" 3 Jaw Adjustable Self Centering Lathe Chuck 2-1/4-8 Back Plate Easy Set - In good working condition.
- Interstate A Series Adapter Back Plate for 12" Lathe Chucks A2-6 Mount - Chuck Compatibility Self-Centering Chucks. Nominal Chuck Size 12. Adapter Back Plate. Mount A2-6. Spindle Nose Type A Series. 155 Center Ct.
- 8" Threaded Back Plate 1-1/2 x 8 TPI For 3 or 6 Jaw Zero Set Adjustable Lathe R - Fits lathe spindle with 1-1/2 x 8 TPI threads. We have more LATHE CHUCKS available Thread Size: 1-1/2-8. High cast iron grade. You may ask for freight cost before buying tools.
- 12" D1-6 Back Plate For 12" 3 and 6 Jaw Zero-Set Lathe Chucks Need Machine D1 R - You would not need to drill any mounting holes but you will need to turn the shoulder down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle.
- 10" D1-8 Back Plate For 10" 3 and 6 Jaw Zero-Set Lathe Chucks Need Machine D1 R - You would not need to drill any mounting holes but you will need to turn the shoulder down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle.
- 10" Semi-Machined Threaded Back Plate 2-1/4"x 8 For All Plain Back Lathe Chuck R - For back plate you would need to drill mounting holes and turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- AP10-D6 10" D1-6 Fully Machined Camlock Back Plate for CS FS Lathe Chucks New R[ - AP series adaptor plates are compatible with FS, CS series, Gator lathe chuck, and also Bison lathe chuck. Do not require secondary machining operation on the adaptor plate and it will hold the runout when mounting onto the lathe chuck.
- AP8-D3 8" D1-3 Fully Machined Camlock Back Plate for CS FS Lathe Chucks New R[ - AP series adaptor plates are compatible with FS, CS series, Gator lathe chuck, and also Bison lathe chuck. CS83 8" 3 Jaw Cast Steel Self Centering Scroll Lathe Chuck FS83 8" 3 Jaw Forged Steel Self Centering Scroll Lathe Chuck.
- 6" Steel Wood Lathe Face Plate, 1-1/4" x 8tpi Threaded - Click here to see description.
- 6" D1-4, D4 Semi-Finished adapter Plate for 6" LATHE CHUCKS #ADP-06-D4SM-NEW - Semi-finished D1-=, D4 cam-lock back plate for 6" lathe chuck. D1-4, D4 Cam-lock.
- 6" 3-JAW SELF-CENTERING LATHE CHUCK top-bottom jaws w D1-3 semi-finished adapter - 6" - 3 JAWS Self-Centering T.I.R.---0.003" w. D1-3 semi-finishe adapter backing plate. TWO PCS TONGUE AND GROOVE REVERSIBLE HARDENED top & bottom JAWS. TOP QUALITY.
- 4" Steel Wood Lathe Face Plate, 1" x 8tpi Threaded - Click here to see description.
- No Name 15" Lathe Back Plate W/ Tapered Bore Size 4-1/8" To 5-1/8" - TAPERED BORE SIZE : 4-1/8" TO 5-1/8". BACK PLATE O.D. : 15". BACK PLATE THICKNESS : 2". If your item is received in a different condition than stated (DOA, not working properly etc. NEW, no box. USED, but in good working condition. ).
- * Burnard 8 In. C951 E190 Adapter Back Plate For 8" Lathe Chucks - ITEM LOCATION: SHELF 16. LOOKS IN GOOD CONDITION.
- Buck Chuck Adapter A12 D8 - 1 - Used Buck Chuck Adapter Plate # A12-D8 07/14.
- Bison-Bial 25" A2-20 Type A Finished Steel Adapter Plate for SET-TRU Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production.
- Bison-Bial A2-8 Type A Steel Body Adapter Plate for 8" Power Chucks - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production.
- Interstate Adapter Back Plate for 12" Diam Lathe Chucks 08607608 - Model: 08607608. Nominal Chuck Size 12. Amanda September 12 19.
- Buck Chuck Company Adapter Back Plate for 12" Lathe Chucks B12-D8 - Chuck Compatibility Self-Centering Chucks. Buck Chuck. Spindle Nose Type D Series. Nominal Chuck Size 12. Mount D1-8. Amanda September 11 19.
- Gibraltar D11 Adapter Back Plate for 12" Self Centering Lathe Chucks - Mount - D11. For use w/ - 12” Self Centering Lathe Chucks. Adapter Plate. 155 Center Ct. Does not include camlocks.
- 3'' x 2'' 5C Fixture Mount Precision Lathe Face Plate 3'' Diameter Steel Collet - Lathe tool used in place of face fixtures. Precision ground all over, black oxide finish. Head length Heat treated tool steel shank. Soft head for easy machining. Unit Weight Quantity: 1.
- 10" L00 adapter Plate for self-centering 3, 4, 6-jaw LATHE CHUCKS #ADP-10-L00 - L00 finished threaded back plate for self-centering 3-jaw, 4-jaw, or 6-jaw 10" lathe chucks. Thread: L00 standard.
- Sanou 3" 3 Jaw Self Centering Lathe Chuck K11-80 with 1-8 TPI Back Plate - 1-8 TPI back plate 1pk.
- Adapter Back Plate Lathe Chuck D1-6 - LJ#2110 LJ MARK ADAPTER BACK PLATE LATHE CHUCK D1-6 REFURBISHED,TESTED.
- Shars 8" 4 Jaw Independent Lathe Chuck Tir Certificate + D1-6 Back Plate New R[ - For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- Shars 8" 4 Jaw Independent Lathe Chuck Tir Certificate + D1-4 Back Plate New R[ - For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- Gibraltar A1/A2-6 Adapter Back Plate for 12" Lathe Chucks - Nominal Chuck Size 12. Adapter Back Plate. 155 Center Ct. Venice, FL, 34285. Industry Recycles.
- 8" 4 Jaw Self Centering Lathe Chuck + TIR Certificate + D1-4 Back Plate New XL[ - For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- 8" 4 Jaw Self Centering Lathe Chuck + TIR Certificate + 1-1/2-8 Back Plate XL[ - For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- Bison 7-875-208 Set-Tru Type D1-8 Taper Adapter Back Plate for 20" Lathe Chucks - Chuck Compatibility Bison Set-Tru Chucks. Manufacturer: Bison. Bison Item Number: 7-875-208. Spindle Nose Type D Series. Nominal Chuck Size 20. Mount D1-8.
- Bison 20" C-Taper Back Plate for Set-Thru Bison Lathe Chucks - C-8 D" Mount - Manufacturer: Bison. Bison Item Number: 7-920-208. Chuck Dia in 20. Weight lb 70. A in 16.02. Number of Studs 4.
- Toolmex (7-630-006) 6" Diameter Base Plate For Plain Black Lathe Chuck - Part Number7-630-006. Item(s) described above and exactly what's pictured.
- New Bison Poland 10" Lathe Chuck Back Plate Adapter. L2 L-2 Mount. $325 - New Bison Poland 10" Lathe Chuck Back Plate Adapter. L2 L-2 Mount. Part number: 8250-10-L2 Please See additional Pictures Below the Description.
- New Bison Poland 5" Machined Set-Tru Lathe Chuck Adapter Back Plate. A1-4 mount - New Bison 5" Machined Set-Tru Lathe Chuck Adapter Back Plate. A1-4 mount. Made in Poland Please See additional Pictures Below the Description.
- NOS KCM USA Semi-Machined 12-1/2" Lathe Chuck Back Plate Adapter. L-1 L1 Mount - NOS KCM ( Kalamazoo Chuck Manufacturing) USA Made Semi-Machined 12-1/2" Lathe Chuck Back Plate Adapter. L-1 L1 Mount . $1037 List Please See additional Pictures Below the Description.
- New Made in Japan 12-1/4" Rough Cast Lathe Chuck Adapter Back Plate $336 List - New Made in Japan 12-1/4" Rough Cast Lathe Chuck Adapter Back Plate. No M-8. New list $336. This casting is extremely heavy and will be shipped in a heavy duty crate. Please See additional Pictures Below the Description.
- New Bison Poland 12" Set-Tru Lathe Chuck Adapter Plate. DIN8 DIN-8 $712 - New Bison Poland 12" Set-Tru Lathe Chuck Adapter Plate. DIN8 mount type Please See additional Pictures Below the Description.
- Bison 7-878-259F Adapter Back Plate for 25" Self-Centering Lathe Chucks - Chuck Compatibility Self-Centering Chucks. Manufacturer: Bison. Nominal Chuck Size 25. Material Cast Iron.
- Bison 7-873-2600 Finished A1-15 Adapter Plate for 25" Lathe Chucks - Manufacturer: Bison. Application 25" Chuck. Type Adapter Plate. Style Finished. Item(s) described above and exactly what's pictured.
- Bison 7-878-209 Finished D1-11 Steel Adapter Plate for 20" Lathe Chucks - Manufacturer: Bison. Application 20" Chuck. Type Adapter Plate. Style Finished. Body Material Steel. Item(s) described above and exactly what's pictured.
- Bison-Bial 16" A1/A2-8 Fully Finished Adapter Plate For Scroll Lathe Chuck - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production. Designed for direct mouting on A1 and A2 spindle nose. Provided with spindle mouting bolts.
- Bison-Bial A2-11 Type A Steel Body Adapter Plate for 16" Power Chucks - Whether scroll, independent or collet, these chucks have been replacing their competitors for the last 30 years without sacrificing production.
- 6" L00 Semi-finished adapter Plate for LATHE CHUCKS #ADP-06-L00SM-NEW - L00 Semi-finished threaded back plate for 6" lathe chuck. Thread: L00 standard. Keyway cut ready by EDM wire cut.
- 8" Craftsman Lathe Chuck Plate D18924 018924
- New Bison Poland 10" Lathe Chuck Adapter Back Plate. D5 D1-5 mount $412 - New Bison Poland 10" Lathe Chuck Adapter Back Plate. D5 D1-5 mount . Premium European quality. Please See additional Pictures Below the Description.
- New Bison 8" Set-Tru Lathe Chuck Back Plate 2-1/4" x 8 for South Bend Heavy 10 - New Bison Poland 8" Set Tru Lathe Chuck Back Plate Adapter. 2-1/2" x 8 threaded mount. Box may be different than shown. For 3 and 6 Jaw Set-Tru BISON Lathe chucks Please See additional Pictures Below the Description.
- New Bison 3Mt 5" Lathe Back Plate Chuck Adapter for Rotary Table Mill Fixture - New Bison Poland 5" Lathe Chuck Adapter for Rotary Tables / Milling Fixture. Part number: 8293-5" NEW Bison-Bial model 8293-5 backing plate for mounting a Bison 2,3,4 jaw front mounting lathe chuck to a rotary table. It uses the included MT3 pin to center it on the rotary table. Not available from Bison as they have been discontinued. So, here's your chance to get one. Info from mfg web site: • Perfect for all rotary tables with 3, 4, or 6 equally spaced T-Slots The backing plate includes the following : 6 mounting bolts, 6 T-nuts, and one MT3 centering pin. Please See additional Pictures Below the Description.
- Sanou 3" 3 Jaw Self Centering Lathe Chuck + 1-8 TPI Thread Back Plate Wood Lathe - 1-8 TPI back plate 1pk.
- Shars 3" X 3" Precision 5C Fixture Mount Lathe Face Plate New # - 3" X 3" PRECISION 5C FIXTURE MOUNT LATHE FACE PLATE GROUND NEW. Lathe tool used in place of face plate fixtures. Precision ground all over. Head Length: 3". Soft head for easy machining. Heat treated tool steel shank.
- 8" D1-5 Back Plate For 8" 3 and 6 Jaw Zero-Set Lathe Chucks Need Machine D1 R - You would not need to drill any mounting holes but you will need to turn the shoulder down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle.
- Lathe Chuck Backing Plate 1 5/16” x 8 15/16” TPI Tapered L 161 - Backing plate is used but in good condition.Please view my photos for item condition and its specs.Overall it looks good and should work well. Please look at my pictures closely because they are my best description. Free shipping lower 48 states only. When selling items like this, it is not a perfect science so, if you are not happy with it just return and I will refund your money.For shipping out of the 48 states I only use global shipping program. If that option is not available it's because the global shipping company won't do it. G-5 inv 184
- 7 7/8” OD TAPERED BACKING PLATE FOR LATHE CHUCK 1,7/16” Thru Hole 824-8-6 - Face plate is used, but in very good shape. Please view my photos for item condition and its specs.Overall it looks good and should work well. Please look at my pictures closely because they are my best description. Free shipping lower 48 states only. When selling items like this, it is not a perfect science so, if you are not happy with it just return and I will refund your money.For shipping out of the 48 states I only use global shipping program. If that option is not available it's because the global shipping company won't do it. G-5 inv 177
- 12" Semi-Machined Back Plate D1-11 For All Plain Back Lathe Chuck New R - For back plate you would need to drill mounting holes and turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- New Pratt Burnerd 8" Setrite Set-Rite Lathe Chuck D1-3 Adapter Back Plate. $395 - New Pratt Burnerd 8" Set Rite Chuck D3 Adapter Back Plate. Box may not be as shown.
- 12" D1-8 Back Plate For 12" 3 and 6 Jaw Zero-Set Lathe Chucks Need Machine D1 R - You would not need to drill any mounting holes but you will need to turn the shoulder down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle.
- Southbend Lathe out board face plate 8 inch 1-1/4 x 10 tpi chuck (100319) - Ir jts 169 wh-shelf1-A #100319. Appears to be southbend, no label. Now you can! Original mill marks on face- looks new never used.
- BISON 6" TWO-JAW LATHE CHUCK w/ MILLING MACHINE MOUNTING PLATE BASE - Made in Poland by Bison. Chuck Thickness: 2-5/8".
- 10" L00 Semi-finished adapter Plate for LATHE CHUCKS #ADP-10-L00SM-NEW - L00 Semi-finished threaded back plate for 10" lathe chuck. Thread: L00 standard.
- New Bison 6" Set-Tru Lathe Chuck Adapter / Back Plate. L0 L-0 back. Poland $306 - New Bison 6" Set-Tru Chuck Adapter / Back Plate. L0 L-0 back. Made in Poland.
- 20" SEMI-MACHINED BACK PLATE D1-11 FOR ALL PLAIN BACK LATHE CHUCK Save $873.33 R - For back plate you would need to drill mounting holes and turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- 6" Lathe Chuck Face Plate
- 7" Lathe Chuck Plate
- 9-3/4" Lathe Chuck Plate 9.75" - 9-3/4" 9.75" LATHE CHUCK PLATE.
- 10" Lathe Chuck Plate, Large End Of Tape Hole 2-1/2"
- 12" Pantec Lathe Chuck Plate
- Gibraltar Rough Chuck Adapter Back Plate for 10" Lathe Chuck Plain Mount 9321985 - Industry Recycles has been serving the Industrial Marketplace since 1998. I'm a paragraph. It's easy. Describe your product.
- Gibraltar Semi-Steel Adapter Plate for 12" Lathe Chucks D11 Mount - Gibraltar Adapter Plate ---For use w/ - 12” Lathe Chucks ---Mount - D11 ---Material - Semi-Steel MSRP $400 Item is unused overstock. There are grease marks on the adapter from it's packaging (see pictures) however, it's in otherwise good condition. Does not include camlocks. Comes exactly as shown in pictures. Shipping Weight: 45 Lbs. Shipping Dimensions: 14” x 14” x 5” ** All Florida customers are required to pay 7% Florida sales tax Sep2017 PM2386 P 51 F.
- 4" 4 Jaw Independent Lathe Chucks w/ TIR Certificate+1-10 Back Plate M[ - For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- 4" 4 Jaw Independent Lathe Chucks w/ Certificate TIR + 1-1/2-8 Back Plate M[ - SHARS 4" 4 Jaw Independent Lathe Chucks w/ Cert. TIR + 1-1/2-8 Back Plate New. For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- 4" 4 Jaw Independent Lathe Chucks w/ TIR Certificate +1-8 Back Plate L[ - For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- 8" 4 Jaw Self Centering Lathe Chuck+TIR Certificate +2-1/4-8 Back Plate NEW XL[ - For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- SHARS 4" 4 Jaw Self Centering Lathe Chucks + 1-8 Back Plate TIR Certificate R[ - SHARS 4" 4 Jaw Self Centering Lathe Chucks with TIR Certificate + 1-8 Back Plate New. For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- 5" 3 Jaw Self Centering Lathe Chuck w/Certificate TIR + 1-1/2-8 Back Plate L[ - For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- 3" 3Jaw Self Centering Lathe Chuck TIR Certificate 3/4-16 TPI Thread Back Plate[ - For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- 1-1/2"-8 thread adapter Plate for 6" self centering LATHE CHUCKS #ADP-06-1128
- 1-1/2"-8 Semi-Finished adapter Plate for 6" LATHE CHUCKS #ADP-06-1128SM-NEW - Semi-finished threaded back plate for 6" lathe chuck. Thread: 1-1/2"-8.
- CNC Lathe chuck adapter plate 6.7 inches A8 face to 6.617 168 MM bolt on mount
- 8" 4-Jaw Self-Centering Lathe Chuck top&bottom jaws w. D1-6 adapter plate-new - 8" - 4 jaw self-centering lathe chuck with D1-6 back mounting adapter plate. with 2pcs top & bottom tongue groove reversible jaws. jaws ground and hardened. STRAIGHT RECESS OR PLAIN BACK SPINDLE MOUNTING.
- Face Plate Holder For Lathe (#6) Diameter: 10", Thick: 1" - FACE PLATE HOLDER FOR LATHE.
- 6" D1-4, D4 adapter Plate for 6" self centering LATHE CHUCKS #ADP-06-D4-NEW - 6" D1-4 adapter plate for 6" self centering lathe chucks.
- 8" L0 Semi-finished adapter Plate for LATHE CHUCKS #ADP-08-L0SM-NEW - L0 Semi-finished threaded back plate for 8" lathe chuck. Thread: L0 standard. Keyway slot finished by EDM wire cut.
- 8" L00 Semi-finished adapter Plate for LATHE CHUCKS #ADP-08-L00SM-NEW - L00 Semi-finished threaded back plate for 8" lathe chuck. Thread: L00 standard.
- 2-1/4"-8 Semi-Finished adapter Plate for 8" LATHE CHUCKS #ADP-08-214SM-NEW - Semi-finished threaded back plate for 8" lathe chuck.
- 1-1/2"-8 Semi-Finished adapter Plate for 8" LATHE CHUCKS #ADP-08-1128SM-NEW - Semi-finished threaded back plate for 8" lathe chuck. Thread: 1-1/2"-8.
- 8" Semi-Machined Threaded Back Plate 1-3/4 - 8 For All Plain Back Lathe Chuck R - For back plate you would need to drill mounting holes and turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- 10" 4-JAW SELF-CENTERING LATHE CHUCK w. L1 adapter plate, extra solid jaws - 10" - 4 jaw self-centering precision lathe chuck w. L1 back mounting adapter plate. T.I.R.---0.003". jaws ground and hardened. With extra solid jaws.
- 10" 4-JAW SELF-CENTERING LATHE CHUCK w. L0 adaptor plate, extra solid jaws - 10" - 4 jaw self-centering precision lathe chuck w. L0 back mounting adapter plate. T.I.R.---0.003". jaws ground and hardened. With extra solid jaws.
- 6" 3-JAW SELF-CENTERING LATHE CHUCK top & bottom jaws w. L0 adaper plate - 6" - 3 JAWS Self-Centering T.I.R.---0.003" w. L0 adapter backing plate. TWO PCS TONGUE AND GROOVE REVERSIBLE HARDENED top & bottom JAWS. TOP QUALITY.
- 6" 3-JAW SELF-CENTERING LATHE CHUCK top & bottom jaws w. D1-4 adapter back plate - 6" - 3 JAWS Self-Centering T.I.R.---0.003" w. D1-4 adapter backing plate. TWO PCS TONGUE AND GROOVE REVERSIBLE HARDENED top & bottom JAWS. TOP QUALITY.
- Rohm Lathe Chuck Back Plate A2-6 Spindle Adapter For ZSU 250 Hi-tru 250mm 10" - ROHM A2-6 Spindle Adapter For ZSU-250-Hi-tru. DIN 55026 A2-6 Spindle Adapter For ZSU-250-Hi-tru USA Design Radially Adjustable Lathe Chuck. Gear Hobs, Lathe Chucks. Bore Gage setting Rings ( 10mm - over 300mm 1/4" - 13").
- 23-1/2 in. Lathe Face Plate (Inv.16884) - (Inv.16884). Not What You Were Looking For?.
- 8" Threaded Back Plate 2-1/4 x 8 TPI For 3 or 6 Jaw Zero Set Adjustable Lathe R - Fits lathe spindle with 2-1/4 x 8 TPI threads. We have more LATHE CHUCKS available Thread Size: 2-1/4-8. High cast iron grade. You may ask for freight cost before buying tools.
- 6" Threaded Back Plate 2-1/4 x 8 TPI For 3 or 6 Jaw Zero Set Adjustable Lathe R - Fits lathe spindle with 2-1/4 x 8 TPI threads. LATHE CHUCK CATEGORY Back Plates Threaded Mounting. We have more LATHE CHUCKS available SPINDLE NOSE TYPE Threaded. Fits most plain back chuck. High cast iron grade.
- 6" Threaded Back Plate 1-1/2 x 8 TPI For 3 or 6 Jaw Zero Set Adjustable Lathe R - Fits lathe spindle with 1-1/2 x 8 TPI threads. We have more LATHE CHUCKS available Thread Size: 1-1/2-8. High cast iron grade. You may ask for freight cost before buying tools.
- 4" Steel Face Plate / Screw Chuck Wood Lathe Turning Fits Shopsmith + 1-8 New - Here are the specs Safety Note: It is very important that you securely fasten the spindle adapter to your lathe spindle, and the face plate to the spindle adapter. Failure to properly secure these components can result in injury.
- 3" Steel Face Plate / Screw Chuck Wood Lathe Turning Fits Shopsmith + 1-8 New - Here are the specs Safety Note: It is very important that you securely fasten the spindle adapter to your lathe spindle, and the face plate to the spindle adapter. Failure to properly secure these components can result in injury.
- 8" 6-JAW SELF-CENTERING LATHE CHUCK w. top&bottom jaws, D1-4 adapter back plate - 8" - 6 jaw self-centering lathe chuck w. D1-4 back mounting adapter plate. 0.003" TIR. with 2pcs top & bottom tongue groove reversible jaws. jaws ground and hardened. STRAIGHT RECESS OR PLAIN BACK SPINDLE MOUNTING.
- 10" 4-JAW SELF-CENTERING LATHE CHUCK w. L00 adapter back plate, 4 extra jaws - 10" - 4 jaw self-centering precision lathe chuck w. L00 back mounting adapter plate. T.I.R.---0.003". jaws ground and hardened. Extra 4 jaws. Adapter keyway width: 5/8".
- 8" 4-Jaw Self-Centering Lathe Chuck top&bottom jaws w. L1 adapter plate-new - 8" - 4 jaw self-centering lathe chuck with L1 back mounting adapter plate. with 2pcs top & bottom tongue groove reversible jaws. jaws ground and hardened. STRAIGHT RECESS OR PLAIN BACK SPINDLE MOUNTING.
- 8" 4-Jaw Self-Centering Lathe Chuck top&bottom jaws w. L0 adapter plate-new - 8" - 4 jaw self-centering lathe chuck with L0 back mounting adapter plate. with 2pcs top & bottom tongue groove reversible jaws. jaws ground and hardened. STRAIGHT RECESS OR PLAIN BACK SPINDLE MOUNTING.
- 8" 4-Jaw Self-Centering Lathe Chuck top&bottom jaws w. L00 adapter plate-new - 8" - 4 jaw self-centering lathe chuck with L00 back mounting adapter plate. with 2pcs top & bottom tongue groove reversible jaws. jaws ground and hardened. STRAIGHT RECESS OR PLAIN BACK SPINDLE MOUNTING.
- 6" 4-JAW SELF-CENTERING LATHE CHUCK w. L00 adapter back mounting plate-new - W. L00 adapter back mounting plate. with 2pcs top & bottom tongue groove reversible jaws. jaws ground and hardened.
- SGFH26-3 SGFH326 3mm Part Off Blade Grooving Cut Off Plate Tool holder CNC Lathe - Applying for turning and facing, is suitable for cutting fluid. Used on turning lathe machine. It can reduce the tool grinding cost and improve the cutting efficiency. Enhance the surface gloss of the cutting pieces.
- 1-1/2"-8 Semi-Finished adapter Plate for 6" LATHE CHUCKS #ADP-06-1128SM- NEW - Semi-finished threaded back plate for 6" lathe chuck. Thread: 1-1/2"-8.
- 1-1/2"-8 Semi-Finished adapter Plate for 8" LATHE CHUCKS #ADP-08-1128SM- NEW - Semi-finished threaded back plate for 8" lathe chuck.
- 8" 4-Jaw Self-Centering Lathe Chuck w. 2-1/4"-8 adaptor back mounting plate-new - With 2pcs top & bottom tongue groove reversible jaws. Back mounting bolts circle dia. Back mounting recess dia. jaws ground and hardened. TOP QUALITY.
- 2-1/4"-8 Semi-Finished adapter Plate for 8" LATHE CHUCKS #ADP-08-214SM- NEW - Semi-finished threaded back plate for 8" lathe chuck.
- 6" 3-JAW SELF-CENTERING LATHE CHUCK top & bottom jaws w. 2-1/4"-8 daptor plate - 6" - 3 JAWS Self-Centering T.I.R.---0.003" w. 2-1/4"-8 adapter backing plate. TWO PCS TONGUE AND GROOVE REVERSIBLE HARDENED top & bottom JAWS. TOP QUALITY.
- 8" 3-JAW SELF-CENTERING LATHE CHUCK top & bottom jaws, w. 2-1/4"-8 adaptor plate - 8" - 3 JAWS Self-Centering T.I.R.---0.003" with 2-1/4"-8 back mounting adaptor platePRECISION SEMI-STEEL BODIES.TOP QUALITY.AMERICAN STANDARD.TWO PCS TONGUE AND GROOVE REVERSIBLE HARDENED top & bottom JAWS.2-5/8" THRU HOLE DIAMETERMounting bolts circle dia. 180mmMounting recess dia.165mm Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application
- 3" Precision Steel Face Plate / Screw Chuck for Easy Wood Lathe Turning New - Here are the specs This excellent face plate / screw chuck is made from steel and is expertly machined with 1-8 threads. With 5/16" screw chuck adapter. With 1/4" screw chuck adapter. Precision machined face with 1 ring.
- 3" Precision Steel Face Plate Fits Mark V Shopsmith Wood Turning Lathe NEW - Here are the specs Safety Note: It is very important that you securely fasten the spindle adapter to your lathe spindle, and the face plate to the spindle adapter. Failure to properly secure these components can result in injury.
- J&L 8" Bst-75086-B Lathe Chuck Adapter Plate - Adapter plate for 8" chuck. See picture for physical details.
- Bison 8215-10"-5 Lathe 10" Chuck Adapter Back Plate ***FREE SHIPPING*** - NEW Bison Lathe Chuck Adapter Back Plate. FULLY MACHINED ADAPTER FOR 3 & 6 JAW SET-TRU CHUCKS FOR SPINDLE.
- Gibraltar 93219996 Adapter Back Plate for 12 Inch Diameter Lathe Chucks(T) - MSC Part #: 93219996. Manufacturer: Gibraltar.
- Shars 5" Semi-Machined Back Plate D1-4 For All Plain Back Lathe Chuck New # - For back plate you would need to drill mounting holes and turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- MACHINIST TOOLS LATHE MILL Lot of 2 Tool Makers Angle Plate Fixture s DrNt - NO EXCEPTIONS.
- 10-1/2” Lathe Chuck Adapter Plate D1-5 Spindle Mount Taper 1-3/16” Thickness USA - Lathe Chuck Adapter Plate. - Spindle Mount: D1-5. - Thickness: 1-3/16”. - Made in USA. SMALL TOOLS INC. - Heavy Duty.
- 8-1/4” Lathe Chuck Adapter Plate D1-5 Spindle Mount Taper 1-1/8” Thickness USA - Lathe Chuck Adapter Plate. - Spindle Mount: D1-5. - Thickness: 1-1/8”. - Made in Cleveland, Ohio, USA. - Heavy Duty.
- 8" 3-JAW SELF-CENTERING LATHE CHUCK top & bottom jaws, 1-1/2"-8 adaptor plate - 8" - 3 JAWS Self-Centering T.I.R.---0.003" with 1-1/2"-8 back mounting adaptor plate. TWO PCS TONGUE AND GROOVE REVERSIBLE HARDENED top & bottom JAWS. TOP QUALITY. Mounting recess dia.165mm.
- 6" 3-JAW SELF-CENTERING LATHE CHUCK top & bottom jaws w. 1-1/2"-8 adapter plate - 6" - 3 JAWS Self-Centering T.I.R.---0.003" w. 1-1/2"-8 adapter backing plate. TWO PCS TONGUE AND GROOVE REVERSIBLE HARDENED top & bottom JAWS. TOP QUALITY.
- 10" D1-6 Back Plate For 10" 3 and 6 Jaw Zero-Set Lathe Chucks Need Machine D1 R - You would not need to drill any mounting holes but you will need to turn the shoulder down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle.
- 8" D1-6 Back Plate For 8" 3 and 6 Jaw Zero-Set Lathe Chucks NEW R - You would not need to drill any mounting holes but you will need to turn the shoulder down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle.
- 8" D1-4 Back Plate For 8" 3 and 6 Jaw Zero-Set Lathe Chucks Need Machine D1 R - You would not need to drill any mounting holes but you will need to turn the shoulder down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle.
- 6" D1-6 Back Plate For 6" 3 and 6 Jaw Zero-Set Lathe Chucks Need Machine D1 R - You would not need to drill any mounting holes but you will need to turn the shoulder down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle.
- 6" D1-5 Back Plate For 6" 3 and 6 Jaw Zero-Set Lathe Chucks Need Machine D1 # - You would not need to drill any mounting holes but you will need to turn the shoulder down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle.
- 6" D1-4 Back Plate For 6" 3 and 6 Jaw Zero-Set Lathe Chucks Need Machine D1 R - You would not need to drill any mounting holes but you will need to turn the shoulder down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle.
- 6" D1-3 Back Plate For 6" 3 and 6 Jaw Zero-Set Lathe Chucks Need Machine D1 R - You would not need to drill any mounting holes but you will need to turn the shoulder down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle.
- Shars 6" D1-3 Fully Machined Back Plate For 6" 4 Jaw Independent Lathe Chuck R - For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- Shars 8" Semi-Machined Back Plate D1-5 For All Plain Back Lathe Chuck New # - For back plate you would need to drill mounting holes and turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- 6" Semi-Machined Threaded Back Plate 1-3/4-8 For All Plain Back Lathe Chuck # - For back plate you would need to drill mounting holes and turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- Shars 5" Semi-Machined Back Plate D1-3 For All Plain Back Lathe Chuck New # - For back plate you would need to drill mounting holes and turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- 16" D Mount Poland Metal Lathe Chuck Back Or Face Plate D1-6? - Electrical boxes shown without covers do not include covers, order the correct surface or flush mount type from your supplier. Power cords, plugs and remotes not included unless pictured. Wrenches & chuck keys not included unless pictured.
- 109 109.20630 6" Craftsman LATHE MOUNTING PLATE BOLT AND NUT 1/4-20 - Craftsman 6" Model 109.20630. MOUNTING PLATE BOLT AND NUT 1/4-20. If you have any requests, we can check it out for you.
- 2" Precision Steel Face Plate 1-8 Threaded for Easy Wood Lathe Turning New - Here are the specs Precision machined face with 1 ring. This excellent face plate is made from steel and is expertly machined with 1-8 threads. 4 holes on plate to ease mounting of your work piece.
- MACHINIST MILL LATHE TOOL 13 1/2" in Diameter Face Plate for Lathe 2 1/8" Center - NO EXCEPTIONS.
- 8" 3 Jaw Reversible Self Center Lathe Chuck +1-1/2"-8 Back Plate TIR XL[ - For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- 6" 3 Jaw Self Centering Lathe Chuck 1-1/2-8 Back Plate TIR Cert 2 Set Jaw L[ - For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- 8" 3 Jaw Reversible Self Center Lathe Chuck +2-1/4"-8 Back Plate TIR XL[ - For back plate you would not need to drill any mounting holes but you will need to turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.
- Shars 3 X 2" Precision 5C Fixture Mount Lathe Face Plate New # - 3 X 2" PRECISION 5C FIXTURE MOUNT LATHE FACE PLATE GROUND NEW. Lathe tool used in place of face plate fixtures. Precision ground all over. Head Length: 3". Soft head for easy machining. Heat treated tool steel shank.
- RH or LH Threaded Insert Nut for Lathe Chuck & Face Plate Choice of 14 Sizes New - The inserts vary in length depending on thread size. 3/4-10" RH or LH Threaded (RH for inboard turning.LH for outboard turning). 1-1/4"-8 RH or LH Threaded (Round insert.not pictured). 3/4"-16 RH or LH Threaded.
- Shars 2" X 2" Precision 5C Fixture Mount Lathe Face Plate New # - 2" X 2" PRECISION 5C FIXTURE MOUNT LATHE FACE PLATE GROUND NEW. Lathe tool used in place of face plate fixtures. Precision ground all over. Head Length: 2". Soft head for easy machining. Heat treated tool steel shank.
- 10" SEMI-MACHINED BACK PLATE D1-5 FOR ALL PLAIN BACK LATHE CHUCK Save $259.75 R - For back plate you would need to drill mounting holes and turn the shoulder D1 down. 040" to match the back of the lathe chuck to make the chuck & back plate more concentric with the lathe spindle and reach chuck's TIR.