100
VDI-40 Right Angle KM-40 Clamping Unit
$290.00 Buy It Now or Best Offer
Erickson Hydraulic Chuck 6902709$776.00$271.60 Buy It Now or Best Offer
1pcs ACS-1100-RM-19= 19-inch mounting ears for C1111-8PLTEEAWE
$80.00 Buy It Now
A pair of mounting bracket ears for Cisco Nexus N9K-C93180YC-EX
$105.00 Buy It Now
A pair of ACS-4330-RM-19= chassis accessories Mounting ears for Cisco ISR4331/K9
$61.81 Buy It Now
A pair of CISCO RCKMNT-19-CMPCT= rack ears for WS-C2960CG-8TC-L
$63.78 Buy It Now
A pair of ACS-900-RM-19= 19-inch bracket ear hanging ear for Cisco C921-4PLTEAS
$163.40 Buy It Now
A pair of ACS-4220-RM-19= bracket mounting ears for Cisco ISR4221/K9
$79.78 Buy It Now
A Pair of ACS-4220-RM-19= Single bracket for Cisco ISR4221/K9
$99.26 Buy It Now
5PCS Infrared obstacle avoidance sensor E18-D80NK special bracket
$35.69 Buy It Now
Ingersoll S050MOD06CA-50 TopOn M06 M6 Carbide Shank D0.50" L5.00"4506845 6245707
$264.99 Buy It Now
ERICKSON HSK100AHC14150M Hydraulic Chuck, Silver
$839.95$755.95 Buy It Now or Best Offer
A pair of hanging ears bracket AC6507S controller dedicated
$49.00 Buy It Now
Komet A32 51060 ABS 63 End Mill Holder 1" New A3251060
$185.00 Buy It Now
Komet A2010340 Adapter Reducer Tool Holder ABS40 To ABS50 System Size Modular$225.99 Buy It Now or Best Offer
1pcs rectifier tube module diode module MDC182A1600V rectifier diode MDC182-16
$46.00 Buy It Now
Sandvik Coromant C8-A391.05-25 030 Capto to Milling Cutter Arbor, Size C8 to ϕ1"
$95.00 Buy It Now or Best Offer
Beaver Tool NO. 11 Quick Change 3MT Adapter
$75.00 Buy It Now or Best Offer
New Kennametal End Mill Adapter HSK63AEM100375 1" Dia 3.75" Gage Length
$175.00 Buy It Now
1 pc. VM40-S25H-SCLPL-09 VALENITE BORING TOOL W/COOLANT THRU. (loc stk)
$79.00 Buy It Now
VDI-40 Protective Plug NC 82.4083S
$40.00 Buy It Now or Best Offer
1pcs new Fresco 21 Fresco 17 Pico 21 Pico 17 Rotor Cover for Thermo Centrifuge
$145.89 Buy It Now or Best Offer
1PC replacement For SORVALL LEGEND MICRO centrifuge 17 button keypad Membrane
$97.35 Buy It Now or Best Offer
VDI-40 Protective Plug NC 82.4083S
$40.00 Buy It Now or Best Offer
Kennametal KM40-CLRL-VDI-4040 Right Angle Clamping Unit
$320.00 Buy It Now or Best Offer
Hougen 6-12226 13/16" X 6" "12,000-Series" Annular Cutter
$158.99 Buy It Now
Iscar HP E90AN-D.50-2-W.50-7 With 20x HP ANKT 0702 PNTR inserts, See photos.
$385.00 Buy It Now or Best Offer
1 watcher Sandvik Coromant HSK to Coromant Capto Adaptor C8-390.419-100 120$449.99 Buy It Now or Best Offer
GMtec GmbH Tool Holder HSK63C-L62-20S-D12, D41.E.01120, M27112809-0407$299.99 Buy It Now or Best Offer
1 watcherSandvik Coromant SilentTools Boring Bar C6 to SL40 Adaptor C6-570-3C 40 198
$1,410.00 Buy It Now or Best Offer
Sandvik Coromant SilentTools Boring Bar C6 to SL40 Adaptor C6-570-3C 50 247-40R
$1,683.00 Buy It Now or Best Offer
Sandvik Coromant SilentTools Boring Bar C6 to SL40 Adaptor C6-570-3C 60 295-40R
$1,956.00 Buy It Now or Best Offer
Sandvik Coromant SilentTools Boring Bar C8 to SL40 Adaptor C8-570-3C 50 468-40R
$3,466.20 Buy It Now or Best Offer
Sandvik Coromant C5-A391.20-09 055 Capto to Weldon Adaptor: C5 to ϕ1/2
$175.00 Buy It Now or Best Offer
BT40 CF4-L Iscar BT MAS Clickfit 4548033$155.25$108.67 Buy It Now
Schüssler Shrink Chuck 6mm 754021-31$156.18$62.47 Buy It Now or Best Offer
Dihart 540.40.425 Solid Carbide Reamer Holder DAH Base
$74.99 Buy It Now or Best Offer
Diebold 75.508.310 Goldring Jetsleeve Shrink Fit Chuck HSK Tool Holder Extension
$149.99 Buy It Now or Best Offer
Mapal Mn5032-10-K Hsk 100 Max. Anzugsm 15Nm
$75.00 Buy It Now or Best Offer
Erickson Hydraulic Chuck Shrink Fit Tool Holder 75.90mm OAL HSK32CHC08060M$691.69$276.68 Buy It Now or Best Offer
Kennametal KM50 Indexable Blade Holder A3 / A4 Modular Grooving Head
$125.00 Buy It Now or Best Offer
PH Horn VDR.061.46.70.50.BM Toolholder Adjustable Reaming Extension Adaptor D1A2
$170.00 Buy It Now or Best Offer
D'Andrea PF 80/32 Modular Face Mill Adapter Holder 32mm
$49.95 Buy It Now or Best Offer
D'Andrea PF 63-3/4 Modular Face Mill Adapter 3/4"
$49.95 Buy It Now or Best Offer
1 watcherKennametal KM40 Indexable Cutting Unit Top Notch KM40TSNER4 (3902287)
$97.95 Buy It Now or Best Offer
1 watcherKennametal KM40 Indexable Cutting Unit Boring Head KM40SDUCR11
$69.95 Buy It Now or Best Offer
Ingersoll 2J6B03R01 3017015-C 3" mill cutter
$125.00 Buy It Now or Best Offer
SANDVIK C4-A390B.45-50 060 Modular Tool Holder Adapter CAT50 to Capto C4 Coolant$184.99$175.74 Buy It Now
1 watcherKM32CLSR1250B 1024682 Kennametal KM32 Clamping Unit Square Good Condition
$985.00 Buy It Now or Best Offer
CVKV50BKM63225 3815271 Kennametal CAT50 Dual Contact Big Plus to KM63 Adapter
$730.00 Buy It Now or Best Offer
Kennametal KM40-RCMI-VDI4060 Tooling Clamping Unit (VDI40 to KM40)
$290.00 Buy It Now or Best Offer
Kennametal KM40-CLAN-VDI4070 Tooling Clamping Unit
$280.00 Buy It Now or Best Offer
1 pc. HSK63-ASM150-287 VALENITE FACE MILL HOLDER. USA ( loc stk)
$175.00 Buy It Now
A pair SOHO-SWITCH-FL-02 Hanging ear bracket for H3C S1850V2-10P-PWR Only
$32.58 Buy It Now or Best Offer
Valenite Modco 1-3/8" Acme Automotive Adjustable Shank End Mill MT Tool Holders
$65.00 Buy It Now
Kennametal H16MDUNR3• 1096484 • Right Hand Modular Boring Cutting Unit Head
$150.00 Buy It Now
Kennametal Erickson KM40-LCM-VDI-4040 Right Angle Clamping Unit
$320.00 Buy It Now or Best Offer
1 watcherKennametal KM40 VDI-40 Right Angle Clamping Unit
$240.00 Buy It Now or Best Offer
1 watcherKennametal KM40 VDI-40 Right Angle Clamping Unit
$240.00 Buy It Now or Best Offer
1PC NEW FOR input module Valve terminal accessories 541480 CPX-8DE-D
$166.95 Buy It Now or Best Offer
Iscar 3260174, GDV100-MF20X1-I-W1.00, Threaded Gundrill Shank, SUMOGUN
$29.95 Buy It Now
1 watcherRenishaw DPU-1 Data Processing Unit OMM-S Receiver ,OSI-S interface
$1,250.00 Buy It Now
Sandvik C6-391.14-40 065 Modular Tool Holder Adapter. SHELF X3
$175.00 Buy It Now
1 watcherD'Andrea TU 63/75.20 Modular Tool Holder Head MHD63 Compatible With Iscar MB63
$229.99$218.49 Buy It Now
1 watcherIngersoll 1.000 dia Di-Pos Indexable Milling Cutter 1TG1G-10019S1R03
$250.00 Buy It Now or Best Offer
HSK63A-ER32-100 Tool Holder High Precision Collet Chuck for CNC Machine Tool
$85.00 Buy It Now or Best Offer
HSK63A-ER32-80 Tool Holder High Precision Collet Chuck for CNC Machine Tool
$85.00 Buy It Now or Best Offer
Erickson Adapter Black HSK63CBB063100M
$349.99 Buy It Now or Best Offer
Kennametal-Widia-Heinlein Modular Flange Clamp Lot of (3) 50mm
$134.99 Buy It Now or Best Offer
SECO Graflex 6 System Size, BT50 Taper, Modular Tool Holding System Adapter
$550.00$269.50 Buy It Now or Best Offer
Eclipse RSH-M5 Twist Lock Radial Drive Holder: 5MT, ϕ2-3/4" Body, for RS Style
$40.00 Buy It Now or Best Offer
1 watcher SANDVIK C4-A391.10-31 035 Tool Holder Adapter Capto C4 Side/End Mill 1.25" Arbor$259.99$246.99 Buy It Now
ATI K19T Robotic Tool Module USED
$499.99 Buy It Now or Best Offer
ATI QM0607 Robotic Tool Changer Module USED
$499.99 Buy It Now or Best Offer
1 watcher Sandvik C5 Capto to CoroTurn SL 40 Adapter Tool Holder C5-570-40-LF$179.95 Buy It Now or Best Offer
Guhring 17145094 Solid Carbide Step Drill 10.36mm
$20.43 Buy It Now
Komet A5210860 ABS63-CAT50-KR Tool Holding Adapter Coolant Thru ABS 63$100.00$67.00 Buy It Now
1PCS input module Valve terminal accessories 541480 CPX-8DE-D
$167.00 Buy It Now
NEW Sandvik Coromant R416.3-129 149 40 DuoBore boring head slide QTY 2
$150.00 Buy It Now
New Sandvik Coromant 570-40NG-20 CoroTurnSL Adapter (2) 570-DCLNR-40-12-L Head
$599.00 Buy It Now or Best Offer
M. C. Carbide Tool Co P/N T2621239-10 + 3x D-5408080-19 tool + 1x D-5408080-19
$50.00 Buy It Now or Best Offer
1 watcherSandvik Coromant Capto to CoroTurn SL Adaptor C5-570-32-RF
$80.00 Buy It Now or Best Offer
Mapal AA00.329.902 30321099 20mm Shrink Fit HSK-A100 Extension 19"
$1,299.99$1,267.49 Buy It Now or Best Offer
Mapal 30320908 32mm Bore Tool Holder HSK-A100 Extension 10-1/2"
$599.99$584.99 Buy It Now or Best Offer
Sandvik C8-390.410-100 120A C8 HKS-A100 Modular Adaptor
$499.99$487.49 Buy It Now or Best Offer
Mapal AA00.332.955 30320887 16mm Bore Tool Holder HSK-A100 Extension 16"
$799.99$779.99 Buy It Now or Best Offer
Kennametal EVM50R0216M Indexable Modular Blade Coolant Grooving 5955423$39.95 Buy It Now
2 watchers D'Andrea RD 50/20.26 Modular Reducer MHD50 MB50 To MB20 Adapter 26mm Projection$74.99$71.24 Buy It Now
Sandvik Coromant Capto to CoroTurn SL Adaptor C5-570-32-RF
$130.00 Buy It Now or Best Offer
Sandvik Coromant Capto to CoroTurn SL Adaptor C4-570-32-RF
$85.00 Buy It Now or Best Offer
KAISER LARGE DIAMETER SHANKS SIMULTANEOUS FIT, CAT50/SF SHANK x KA8xD11.8 TB195
$1,000.00 Buy It Now or Best Offer
1 watcherUniversal Engineering 80342 Kwik Switch End Mill Holder: ϕ3/8", Size 300
$35.00 Buy It Now or Best Offer
1 watcher D'Andrea RD 50/16.40 Modular Reducer MB50 To MB16 Adapter 40mm Projection$74.99$71.24 Buy It Now
SEM CF4-1 Iscar Clickfit DIN 3937 Shell Mill Holder 4548025$88.42$61.89 Buy It Now
1 watcherKennametal KM40PDXNR15 Lathe Tool Holder
$109.00 Buy It Now or Best Offer
1 watcherUniversal Eng 80342 300-KWIK-SWITCH-3/8 Kwik Switch End Mill Holder: ϕ3/8"
$25.00 Buy It Now or Best Offer
Erickson Hsk63Ahc25120M Hydraulic Tool Holder, .984" Bore
$189.00 Buy It Now
Tecnara 140-840-4 Cat 40 Ground Modular Tool Holder$74.99 Buy It Now or Best Offer
WTO Modular Tool Holding System Adapter 5/8" x C4 Taper C4-W-A391.22-15043
$500.00$245.00 Buy It Now or Best Offer
Walter modular extension A101M.0.80.160.80 160mm boring extension (@D10)
$99.99 Buy It Now
- 12pcs Walter modular adapters extensions deep hole 1-1/2" arbor face mill (@D11) - (1) A100M.3.50.035.63 CAT50 Arbor. (2) A101M.0.63.100.63 100mm extensions. (2) A101M.0.63.160.63 160mm extensions. (3) A101M.0.63.120.63 120mm extensions. (1) A155M.UO.63.045.38 1-1/2" face mill adapter.
- Universal Eng Kwik Switch 300 adjustable boring head & 5/16" double angle collet
- Universal Eng. Kwik Switch 300 3/4" tool holder adapter end mill drill reamer
- Universal Eng. Kwik Switch 300 3/4" tool holder adapter end mill drill reamer
- Universal Eng. Kwik Switch 300 2MT adapter #30-2M #2 Morse Taper drill reamer
- Kwik Switch 300 1MT adapter #30-1M #1 Morse Taper drill reamer holder
- Kwik Switch 300 1MT adapter #30-1M #1 Morse Taper drill reamer holder
- Komet VDI40 To ABS50 Adapter with Komet 1.375" insert drill
- Komet VDI40 To ABS50 Adapter with Komet .812" / 13/16" insert drill
- SECO B18 Mould & Die Combimaster Conventional Adapter 17149 - COMBIMASTER CONVENTIONAL ADAPTER. B18 MOULD & DIE. B18 MOULD&DIE. DCP Data Chip Provision BLQ Balance Quality Code WT Weight Of Item RPMX Rotational Speed Maximum BHTA Body Half Taper Angle.
- KOMET ABS-50 UA5203110 Cat50 Modular ToolHolder_2-1/4” Projection_FAST SHIPPING! - • 2-1/4” Projection.
- [LOT OF 4!] SANDVIK C4-A390.45-50 Capto C4 CAT50 Modular ToolHolders_FAST SHIP! - • [LOT OF 4!]. SANDVIK C4-A390.45-50 Modular Capto C4 CAT50 ToolHolders.
- new VALENITE MSTNR-10CA-3 Indexable Insert Cartridge 🎯 Machinist
- Sandvik C4-390.34705-40 070 Modular Tool Holder System Adapter C4 - Set screw missing; see photos. Used, good condition.
- Sandvik C4-390.34705-40 070 Modular Tool Holder System Adapter C4 - Used, good condition.
- Sandvik C4-390.34705-40 070 Modular Tool Holder System Adapter C4 - Used, good condition.
- GUHRING 14mm SOLID CARBIDE SELF CENTERING STEP DRILL 18655407 MADE IN GERMANY - MPN: 18655407.MADE IN GERMANY.
- D'Andrea 470500540201 SSCC 40 Insert Cartridge Tool Holder Ingersoll 3240023 - Made by D'Andrea but also sold by Ingersoll as Ingersoll EDP# 3240023.
- D'Andrea 657005000405 RAV 50/40.176 MHD50 Reducer MB50 to MB40 Ingersoll 4540840 - Connections are MB50/MHD50 male to MB40/MHD40 female. Extension length is 176mm. Made by D'Andrea but also sold by Ingersoll as Ingersoll EDP# 4540840. This reducer is new/unused, but it does have one tiny ding (see last picture, in front of blue tape pointer).
- Sandvik Coromant C5-A391.05-38 045 Capto to Arbor Adapter: C5 - ϕ1-1/2" Arbor - Sandvik Coromant C5-A391.05-38 045 Capto to Arbor Adapter. Sensor embedded property (SEP) 0. You are getting everything shown in the pictures. If it is not in the pictures it is not included. Body material code (BMC) Steel.
- Sandvik Coromant C5-A391.05-31 040 Capto to Arbor Adapter: C5 - ϕ1-1/4" Arbor - Sandvik Coromant C5-A391.05-31 040 Capto to Arbor Adapter. Sensor embedded property (SEP) 0. You are getting everything shown in the pictures. If it is not in the pictures it is not included. Body material code (BMC) Steel.
- Ingersoll cutting Tool holding MCI7401A0704 - Ingersoll cutting Tool holding MCI7401A0704. #23
- Kennametal HSK63AEM100375 Form A End Mill Adapter 2" x 3.75" x 2.46" 3/8" 254E - Item was removed from a local automotive plant assembly line. It was working when removed and there are no known issues. We are here to help! Model#: HSK63AEM100375. Location: 254E. The sale of this item may be subject to regulation by the Food and Drug Administration and state and local regulatory agencies.
- D’ANDREA 41.6.50.01.050.45 Cat50 ToolHolder_1-1/4”_MULTIPLE IN STOCK_FAST SHIP! - • D’ANDREA 41.6.50.01.050.45 Modular Cat50 ToolHolder. ALL UNITS ARE IN GOOD USED CONDITION.
- KENNAMETAL CV50KM6360 KM63 Modular Tool Holder_#MULTIPLE IN STOCK_FAST SHIPPING! - MOST APPEAR TO HAVE SIMILAR USAGE WEAR.
- Iscar Maxin Power Chuck Tool Holder Cat 50 1-1/4" Diam X 4.05" Newww - SHANK TYPE: CAT 50.
- 1 pc. T-CTFPR8-2 INSERT CARTRIDGE. WENDT-SONIS USA (loc J2) - 1 pc. T-CTFPR8-2 INSERT CARTRIDGE. WENDT-SONIS USA (loc J2).
- KM SYSTEMS KM50TSKGMSL50C GROVEandCUTOFF,KM50TSB.E.AXIALMODLH - Groove/Cutoff.
- ERICKSON BT50BKM63140M Erick Mod,EXT/REDCRS, KM63 BT50 for M B - Erick Mod.
- KM SYSTEMS KM50TSSVJBR16 Insert,KM KM50TS Screw ON Cutting Unit - Insert.
- KM SYSTEMS KM40TSE16JSCLPR09 Indexable Cutting Head Unit, KM40TSE16JSCLPR09, - Indexable Cutting Head Unit, Insert Shape 80 Degrees Diamond, Overall Length 134.95mm, KM40TSE16JSCLPR09, 95 Degrees , 11.00mm, Screw Clamp, Coolant Through, Boring, Right Hand.
- ERICKSON HSK100AKM50100M Extension,MOD RED,HSK100A KM50 - Extension.
- Kennametal HSK63AEM125425 End Mill Holder w/AME 21020S-125F #2 T-A Holder 42D - Item was removed from a local automotive plant assembly line. It was working when removed and there are no known issues. We are here to help! Model#:HSK63AEM125425/ 21020S-125F. Location: 42D. The sale of this item may be subject to regulation by the Food and Drug Administration and state and local regulatory agencies.
- Schunk 0204473 TENDO P HSK-E 50 Hydraulic Expansion Toolholder, 12mm Bore x 85mm - Model # : 0204473. Schunk TENDO Platinum Hydraulic Expansion Toolholder. Toolholder Interface: HSK-E 50. Projecting Length: 85mm. Office Hours Maple Grove, MN 55369. 9472 Hemlock Lane N. SKU# SB-158527.
- Brand New Komet A5210860 ABS63-CAT50-KR Tool Holding Adapter Coolant Thru ABS 63 - Modular Size System: ABS63. Taper Size: CAT50.
- Smith Tool EX52-010-0-0 5/8" QC Tool Holder
- Sandvik 391.540-50 Cat50 adapter holder
- SECO EPB C6-391.5820-16075 Capto 6 tool holder M16mm X 2mm internal threads
- Allied AMEC 02B.50.63L.70 CAT50 ϕ63mm Modular Reamer Holder - You are getting everything shown in the pictures. If it is not in the pictures it is not included.
- Sandvik Coromant C5-570-40-NG Coromant C5 Capto to CoroTurn SL Size 40 Adaptor - Adaptive interface workpiece direction (ADINTWS1) SL (screw mounted) -straight -size 40. Sensor embedded property (SEP) 0. Body material code (BMC) Steel. Coolant entry style code (CNSC) 3: axial concentric and radial entry.
- Sandvik Kosta A10-28-1533-44670 Quick Change Toolholder
- New Sandvik CUTTER SHM 8579 MILLING CORE KNIFE DIE ROLL 155R8231
- Bilz Quick Change Tap Adapter WEN2 M18 - Bilz Quick Change Tap Adapter WEN2 M18.
- Kennametal A4M50R3S14B020025 Indexable Face Grooving Blade A4 Modular 3867460 - Part # A4M50R3S14B020025.
- VALENITE E-Z SET ADJUSTABLE CARTRIDGE BUEA 1-72517-05 with E-Z Cartridge DZC4 - This E-Z set is in excellent condition. And as always KEEP CREATING!
- 1 pc. CTUPL-20CA-4 VALENITE INSERT CARTRIDGE. USA - 1 pc. CTUPL-20CA-4 VALENITE INSERT CARTRIDGE. USA.
- Sandvik Coromant C4-TRE-BT65A Manual clamping UNIT C4-TRE-OK60A 9682A09863 - Sandvik Coromant C4-TRE-BT65A Manual clamping unit for BMT turrets. Shelf-D
- New Sandvik CUTTER SHM 8580 MILLING
- MEGA Double Power Chucks holder BCV50H-MEGA750DS-4 (qq164 - MEGA Double Power Chucks holder BCV50H-MEGA750DS-4 (qq164. Free ship continental usa only
- Komet A5210350 Cat50 Taper Abs50 System Size Modular Tool Holder - SYSTEM SIZE: ABS50. TAPER SIZE: CAT50. PROJECTION: 2.3620". MODULAR TOOL HOLDER. YOU WILL RECEIVE WHAT IS PICTURED, NOTHING LESS NOTHING MORE.
- KM40-NCM-322B Special Clamping Unit Kennametal M787184
- New Guhring 000223-11.110 Din 1897 R-N Extended Carbide Step Drill Dia 11.110 - DIN 1897 R-N EXTENDED. NEW IN BOX.
- HSK100 adapter/tool holder for presetter/measuring machines, Size 2 Spindle - HSK100 Adapter for presetter/measuring machine with Size 2 spindle. This was purchased by a tool company that measured their tools with a ZOLLER presetter. It is held or clamped into a Size 2 spindle and then holds HSK 100 tool holders so that the measuring machine can measure or preset the tool to exact dimensions.
- New Old Stock M. C. Carbide Tool Co P/N T2621239-10 - Location CRBin3.
- Mapal Mn 5092-10-K Hsk 100 Modular Adapter
- Komet A06B 50150 Hsk 100 Modular Tool Holder
- ERICKSON BT50BKM63060M Erick Mod,EXT/REDCRS, KM63 BT50 for M B - Erick Mod.
- ERICKSON HSK100AKM80125M Extension,MOD RED,HSK100A KM80 - Extension.
- ERICKSON HSK100ABB100300M Adapt,ROMICRON BORBAR BLNK HSK100A 100X3 - Adapt.
- ERICKSON BT50BKM80080M Erick Mod,EXT/REDCRS, KM80 BT50 for M B - Erick Mod.
- KM SYSTEMS KM50TSPDXNR15 Insert,KM50TS P-Clamp Cutting Unit CV - Insert.
- ERICKSON HSK100ACHRC2144M Chuck,HSK TAP CHRC TC HSK100A RC 2 - Chuck,HSK TAP CHRC TC HSK100A RC 2.
- Erickson Hsk100Ahc14150M Hsk100Ahc14150M - Hydraulic Chuck, Shank Type - Machining Cylindrical, Hole Dia. 14.00mm, HSK100, Shank Dia. 14.00mm.
- ERICKSON HSK100ASWN50110M Chuck,Clamping HSK100A 50 SWN - Chuck.
- Erickson Bt40Bhcslt06170M Hydraulic Ch'k Slim Line - Hydraulic Chuck, Shank Type - Machining Cylindrical, Hole Dia. 6.00mm, BT40, Shank Dia. 6.00mm.
- New Valenite Indexable Cartridge MTFNR 12CA 16
- Swagelok SS-400-3TST Male Run Positional Tee 1/4" Tube OD x 7/1 - New No Box - Swagelok SS-400-3TST Male Run Positional Tee 1/4" Tube OD x 7/16-20 Male SAE/MS Stright Thread 1/4" Tube OD
- Seco EPB M5525 36075 Graflex Modular Shell Mill Holder: G6 Connection, 3/4" Dia - Seco EPB M5525 36075 Graflex Modular Shell Mill Holder. G6 Connection Machine Side. 3/4" Dia Shank.
- Guhring 19560810 Solid Carbide Step Drill 14mm - We usually beat our competition! Condition: This is a "new other" item. Item has not been used or installed. Item is mint and complete. Hawaii, and Alaska. Listed By: ZH. FIND A LOWER PRICE?. Product was never used.
- Guhring 19410592 Solid Carbide Step Drill 14mm - We usually beat our competition! Condition: This is a "new other" item. Item has not been used or installed. Item is mint and complete. Hawaii, and Alaska. Listed By: ZH. FIND A LOWER PRICE?. Product was never used.
- Komet HBilz HKA5040 GR.5 adapter ABS40 connection
- Cyclo Cut CAT50 EM 1-1/2X4.000 End Mill Holder CAT50 by 1-1/2" / CAT 50
- GUHRING GM-300 HSK-C63 Toolholder_4367_20.063mm_FAST SHIPPING! - • GUHRING GM-300 HSK-C63 Toolholder. • T his toolholder is in good u sed condition. -We take pride in our. -FREE LOCAL PICK-UP ALSO AVAILABLE.
- Komet Abs 50 Cat 40 Adapter A5210150
- Komet A5210860 ABS63-CAT50-KR CAT50 Modular Tool Holding Adapter, Coolant Thru - Modular Size System: ABS63. Taper Size: CAT50. Coolant Thru.
- KM40-NCM-5044 Clamping Unit Kennametal 1021642 ***NEW*** - Connection Size KM40. Clamping Unit Type Square Shank. Square Shank Width (mm) 44.00. Square Shank Length (mm) 50.00.
- * NEW .2770” DIA 7/10 .262” Step Dia NOS
- Kennametal KM50 Indexable Blade Holder A3 / A4 Modular Grooving Head - For use with A3 / A4 Blades. Side Mount. Part # KM50TSKGMSL50.
- NICE! SECO-EPB E9304-5875-25100 ER25-GB Collet Chuck Toolholder _FAST SHIPPING! - •SECO-EPB E9304-5875-25100 Collet Chuck Toolholder. ONLY for defective item. -FREE LOCAL PICK-UP ALSO AVAILABLE.
- Mapal 9-27915 -16810(2) 12.646-12.649 Special Boring Tool
- DIXI T 237 5/8" Diameter Quick Change Toolholder - ONE of the units shown in the pictures for the sale price.
- DIXI T 235 3/8" Diameter Quick Change Toolholder
- DIXI T 236 1/2" Diameter Quick Change Toolholder
- DIXI T 238 3/4" Diameter Quick Change Toolholder
- DIXI T 240 1" Diameter Quick Change Toolholder
- Iscar HP E90AN-D.62-4-W.625-7 With 20x HP E90AN-D.62-4-W.625-7 inserts - Condition is "New".
- Kennametal A4M65R1026M Modular Blade A4 Indexable Grooving Turning - Part # A4M65R1026M.
- Kennametal A4M65R0626M Modular Blade A4 Indexable Grooving Turning 3557116 - Part # A4M65R0626M.
- Balax Inc. M10x1.5 BD 10 Super TIN/S0.88771 Six taps per box. - Balax Inc. M10x1.5 BD 10 Super TIN/S0.88771. Condition is "New". Six taps per box. Shipped with USPS First Class.
- CAPTO C4-RF123H25-27067B Quick Change Cut Off Holder - One Piece
- CAPTO C4-DCLNR-27050-12 Turning Holder - One Piece
- CAPTO C4-TRI-OK60A Boring Bar Holder - One Piece
- CAPTO C4-TRE-OK60A Turning Holder - One Piece
- Solid Carbide Drill // 12.9mm Dia // IPS #766 - Shaft Dia. Tech Condition.
- Assorted CNC Tool Holders with Cutters & Drills For Milling Machines VMC Tools G - They are subject to withdrawal, change and prior sale without notice. All orders received are binding only when they have been accepted and acknowledged by us in writing. We reserve the right to correct typographical errors.
- Assorted CNC Tool Holders with Cutters & Drills For Milling Machines VMC Tools F - They are subject to withdrawal, change and prior sale without notice. All orders received are binding only when they have been accepted and acknowledged by us in writing. We reserve the right to correct typographical errors.
- Assorted CNC Tool Holders with Cutters & Drills For Milling Machines VMC Tools E - They are subject to withdrawal, change and prior sale without notice. All orders received are binding only when they have been accepted and acknowledged by us in writing. We reserve the right to correct typographical errors.
- Assorted CNC Tool Holders with Cutters & Drills For Milling Machines VMC Tools A - They are subject to withdrawal, change and prior sale without notice. All orders received are binding only when they have been accepted and acknowledged by us in writing. We reserve the right to correct typographical errors.
- Assorted CNC Tool Holders with Cutters & Drills For Milling Machines VMC Tools B - They are subject to withdrawal, change and prior sale without notice. All orders received are binding only when they have been accepted and acknowledged by us in writing. We reserve the right to correct typographical errors.
- Iscar ITS-BORE Indexable Boring Bar Heavy Metal MB Modular IHAXF 12-14 AVI - Iscar Its-Bore MB Boring Bar. Part #IHAXF 12-14 AVI. Bore: 12mm. Max Bore: 14mm. EDP# 4550628. On orders before 1pm EST M-F.
- GUHRING Tool Holder GM300 HSK50
- Komet ABS50 CAT50 KR Modular Coolant A5210850 Milling Machine Tool Holder - Condition is "Used".
- Kyocera MRW1250W125123T Steel Indexable Concave Radius Cutter END MILL 3 INSERTS - Item Type: Indexable Endmill Radius Cutter. Number of Cutter Inserts: 3. Maximum Depth of Cut (mm): 6.00mm. Insert Style: ROMU 12.
- NEW VALENITE Indexable Drill 28.mm Dia VWDR-110-125-492 1.102 VAL-U-DEX - NEW VALEVAL-U-DEX 28mm INDEXABLE DRILLNITE.
- Kennametal KM32 Series 5/8” End Mill Tool Holder KM32BA10256 Coolant Thru - Condition is "Used".
- Kennametal KM32 Turning Tool Holder KM Quick Change 340094R01 4035CI7 - Condition is "Used".
- NEW Kyocera MRW1500W125162T Steel Indexable Concave Radius Cutter 1.5" - Item Type: Indexable Endmill Radius Cutter. Number of Cutter Inserts: 2. Maximum Depth of Cut (mm): 8.00mm. Series: RAD-8.
- Komet Extension Adapter A200040 Abs40 V 60 - (sid#6D#1).
- Balax Inc // Bottoming Form Taps (11) // M6 x 1.0 BD10 // TiN Coating //IPS#1310 - Size: M6 x 1.0 BD10. Manufacturer: Balax Inc. Round Shank Dia: 6.5mm. Square Shank Width: 4.8mm. This item is from our inventory and is new (open box). Part # TA14228.
- Balax Inc // Bottoming Form Taps (6) // M10 x 1.5 // TiN Coating // IPS #1306 - Manufacturer: Balax Inc. Size: M10 x 1.5 BMX. Round Shank Dia: 9.6mm. Square Shank Width: 7.2mm. This item is from our inventory and is new (open box). Part # 3237485.
- Balax Inc // Bottoming Form Taps (6) // M10 x 1.5 // TiN Coating // IPS #1308 - Manufacturer: Balax Inc. Size: M10 x 1.5 BMX. Round Shank Dia: 9.6mm. Square Shank Width: 7.2mm. Part # 3237485. This item is from our inventory and is used.
- Balax Inc // Bottoming Form Taps (6) // M10 x 1.5 // TiN Coating // IPS #1304 - Manufacturer: Balax Inc. Size: M10 x 1.5 BH12. Round Shank Dia: 9.6mm. Square Shank Width: 7.2mm. This item is from our inventory and is new (open box). Part # T615729T.
- Balax Inc // Bottoming Form Taps (9) // M10 x 1.5 // TiN Coating // IPS #1305 - Manufacturer: Balax Inc. Size: M10 x 1.5 BH12. Round Shank Dia: 9.6mm. Square Shank Width: 7.2mm. Part # T615729T. This item is from our inventory and is used.
- Balax Inc. // Bottoming Form Tap // M11 x 1.5 BD // TiN Coating // IPS #1300 - Manufacturer: Balax Inc. Size: M11 x 1.5 BD. Round Shank Dia: 8mm. Square Shank Width: 6mm. This item is from our inventory and is used (like new). Part # 629828TT.
- Balax Inc // Bottoming Form Taps (6) // M8 x 1.25 BH9 // TiN Coating // IPS#1302 - Size: M8 x 1.25 BH9. Manufacturer: Balax Inc. Round Shank Dia: 8mm. Square Shank Width: 6mm. This item is from our inventory and is new (open box). Part # T615985T.
- Balax Inc. // Bottoming Form Tap // M11 x 1.5 BD // TiN Coating // IPS #1301 - Manufacturer: Balax Inc. Size: M11 x 1.5 BD. Round Shank Dia: 8mm. Square Shank Width: 6mm. This item is from our inventory and is used. Part # 629828TT.
- Walter // Face Mill // 54mm Dia // IPS #428 - Manufacturer: Walter. Pilot Dia: Tapered 22mm thru 25mm. Part Number: B2074-6221276. This item is from our inventory and is used (like new).
- Bilz // Quick Change Tap Chuck // KFP 2/TR 28X2 // IPS #667 - Part # KFP 2/TR 28X2. Manufacturer: Bilz. Drive Key: 6mm. Tool Shank Dia: 31mm. This item is from our inventory and is new (open box).
- Collet Set - 6 Piece // 3/8" 1/2" 5/8" 3/4" 7/8" 1" // IPS #1276 - This item is from our inventory and is used.
- Valenite // Indexable Insert Cartridge // ESU-15065 // IPS #1282 - Manufacturer: Valenite. Insert not included.
- Valenite // Indexable Insert Cartridge // SCSPR-08CA-06 // IPS #1284 - Manufacturer: Valenite. Insert not included.
- Valenite // Indexable Insert Cartridge // ESU-15727 // IPS #1277 - Manufacturer: Valenite. Insert not included.
- Valenite // Indexable Insert Cartridge // ESU-15730 // IPS #1281 - Manufacturer: Valenite. Insert not included.
- Valenite // Indexable Insert Cartridge // ESU-15729 // IPS #1280 - Manufacturer: Valenite. Insert not included.
- Valenite // Indexable Insert Cartridge // ESU-15728 // IPS #1279 - Manufacturer: Valenite. Insert not included.
- Valenite // Indexable Insert Cartridge // ESU-15726 // IPS #1278 - Manufacturer: Valenite. Insert not included.
- Iscar ETM ITS BORE Finish Boring Head BHFI MB50-50X60 IHCR 50-68 Insert Cartridg - Condition is Used.
- Iscar ITS BORE CHA 40-45* Chamfering Tool Holder For MB Boring Head Modular Tool - Condition is Used.
- Valenite V50CT-VT50-276 Cat50 VTS Modular Toolholder - Great Deal.
- BT50-45 45° External Thread Pull Claw BT50 Spindle 4-petal Claw - We also have a high-standard team, qualified by authorized organizations to ensure products are of the highest quality. The item in the actual use of the process of quality problems.
- BT40-45 45° External Thread Pull Claw BT40 Spindle 4-petal Claw - Claw Length: 50. External Thread: M16 1.5. Equipped with Pull Studs: 45°. We also have a high-standard team, qualified by authorized organizations to ensure products are of the highest quality. The item in the actual use of the process of quality problems.
- BT30 High-precision 45° External Thread Pull Claw 4-petal Claw - Spindle taper hole: 7:24. BT-30 spindle pulling jaw, four-petal jaw, MAS303-1982 Bt/PT1 (45 degrees). External thread: M10. Equipped with pull studs: 45 degrees. Speed temperature rise: 300 (℃). Vibration of cone hole: 0.002 (mm).
- CNC machine tools Engraving/Milling machine BT30 Claw Knife holder - We also have a high-standard team, qualified by authorized organizations to ensure products are of the highest quality. The item in the actual use of the process of quality problems. Other Accessories.
- BT30 Clamp Arm Type Aluminum Knife Holder HDW CNC machine tools - The item in the actual use of the process of quality problems. We also have a high-standard team, qualified by authorized organizations to ensure products are of the highest quality.
- Kennametal KM 32 Modular Tool Holders & Clamping Units CNC Metal Lathe Tooling - Condition is Used.
- Sandvik C4 CAPTO Toolholder A390.45-50 040 CAT50 FREE USA SHIPPING - Sandvik C4 CAPTO Toolholder. A390.45-50 040 CAT50.
- Komet R.B. ABS 40 Modular Tool Holder NMTB 40 & FZ 16-3 Adjustable Boring Head - Condition is Used.
- Komet R.B. ABS 32 Modular Tool Holder NMTB 40 & FZ 12-3 Adjustable Boring Head - Condition is Used.
- Valenite HSK100 HSK100-APC40-2500 VTS MODULAR TOOL HOLDER - HSK100 HSK100-APC40-2500. VTS MODULAR TOOL HOLDER.
- Valenite V50CT-VT80-315 VTS MODULAR TOOL HOLDER
- Valenite VPBPC5-PC3R3 VPB MODULAR TOOL HOLDER
- Valenite VPBPC5-PC4R2 VPB MODULAR TOOL HOLDER
- Valenite VPBN50-C6-4 VPB MODULAR TOOL HOLDER
- Valenite VPBPC6-33JTI VPB MODULAR TOOL HOLDER
- Valenite VPBN40-PC4-3 VPB MODULAR TOOL HOLDER
- Valenite VPB-B35-PC6-4 VPB MODULAR TOOL HOLDER
- Valenite VPBPC6-18EM1 VPB MODULAR TOOL HOLDER
- Valenite VPBPC6-25EM1 VPB MODULAR TOOL HOLDER
- Valenite 1.5" (1 1/2", 38.10MM) VPBPC6155M2 VPB MODULAR TOOL HOLDER
- Valenite VPBCH30-PC4-3 VPB MODULAR TOOL HOLDER
- Valenite JT1 VPB PC6-02JT1 VPB MODULAR TOOLING SYSTEMS - JACOBS TAPER ADAPTERS
- Valenite CAT45 GPL 5" VPBC45-PC6-6 VPB MODULAR TOOL HOLDER
- Valenite VPBS20-PC6-4 VPB MODULAR TOOL HOLDER
- Valenite CV50 / CAT50 GPL 2.75 VPBC50-PC5-4 VPB MODULAR TOOL HOLDER
- Valenite VPBPC6-PC2R3 VPB MODULAR TOOL HOLDER
- Valenite VPBB40-PC4-3 VPB MODULAR TOOL HOLDER
- Valenite VPBPC618EMI VPB MODULAR TOOL HOLDER
- Valenite VPBPC5-PC3R1 VPB MODULAR TOOL HOLDER
- Valenite VPB-M45-PC6-4 VPB MODULAR TOOL HOLDER
- Valenite1.5"(1 1/2",38.10MM)VT80-S150-118Face Mill Arbour VTS MODULARTOOL Holder
- Valenite VPBB35-PC3-4 VPB MODULAR TOOL HOLDER
- Valenite VPBN30-PC4-4 VPB MODULAR TOOL HOLDER
- Valenite VPBB40-PC5-5 VPB MODULAR TOOL HOLDER
- Valenite VPBPC6-PC3R2 VPB MODULAR TOOL HOLDER
- Valenite CV50 / CAT50 GPL 3" VPBC50-PC5-4ML VPB MODULAR TOOL HOLDER
- Valenite VPBK20-PC6-4 VPB MODULAR TOOL HOLDER
- Bilz // Torque Tap Collet Adapter // 9mm Dia // IPS #665 - Manufacturer: Bilz. Pilot Dia: 19mm. Drive Key Size: 10mm. This item is from our inventory and is used (like new).
- Bilz // Tap Collet Adapter // 9mm Dia // IPS #666 - Manufacturer: Bilz. Pilot Dia: 31mm. Drive Key Size: 16mm. This item is from our inventory and is used (like new).
- Smith Tool // Collet Chuck // 27mm Dia // IPS #663 - Pilot Dia: 27mm. Manufacturer: Smith Tool. Drive Key Size: 5mm.
- M C Carbide Tool Co // Solid Carbide Twist Reamer // 9mm Dia // IPS #1272 - Shank Dia: 8mm. Part # 79197-36-400-0. This item is from our inventory and is new (open box).
- M C Carbide Tool Co // Solid Carbide Step Drill // 8mm & 11mm Dia // IPS #1271 - 2nd Dia: 11mm. Shank Dia: 11mm. 1st Dia: 8mm. Tech Condition.
- Solid Carbide Drill // 9mm Dia // IPS #1269 - Shank Dia: 8mm. Tech Condition.
- Bilz // Quick Change Tap Adapter // WEN2 1/2 // IPS #1261 - #1262 - Part # WEN2 1/2. Manufacturer: Bilz. Key Width: 16mm. This item is from our inventory and is used.
- Bilz // Quick Change Tap Adapter // WEN2 3/8 // IPS #1263 - #1264 - Part # WEN2 3/8. Manufacturer: Bilz. Key Width: 16mm. This item is from our inventory and is used.
- Ingersoll Cutting Tool Holder 57N50L01
- Kennametal A4M50L0519M Modular A4 Blade Grooving / Turning - On orders before 1pm EST M-F.
- Kennametal KM40 Indexable Cutting Unit Head KM40TSDCLNR12 KC04 - Quantity: Sale is for 1 piece. Part # KM40TSDCLNR12KC04.
- Kennametal KM40 Indexable Cutting Unit KM40TSSDQCL11 - Part # KM40TSSDQCL11.
- Kennametal KM40 Indexable Cutting Unit KM40TSPDXNR15 P-Clamping - Part # KM40TSPDXNR15. No pin for insert.
- Kennametal KM40 Indexable Cutting Unit KM40TSPDXNL15 P-Clamping - Part # KM40TSPDXNL15.
- Kennametal KM50 Indexable Blade Holder Modular Grooving Head KM50TSKGMSL50
- Guhring // Carbide Step Reamer/Square Drive // 14mm & 18mm Dia // IPS #1250-1251 - Manufacturer: Guhring. 1st Dia: 14mm. 2nd Dia: 18mm. Square Drive: 18.75mm. Part # J025228-000.
- Guhring // Carbide Step Drill and Spot Face // 5mm & 24mm Dia // IPS #1256-1257 - Manufacturer: Guhring. 2nd Dia: 24mm. Length: 24mm. 1st Dia: 5mm. Shank Dia : 16.5mm. Part # PT57A03257. This item is from our inventory and is new (open box).
- Guhring // Carbide Step Drill and Spot Face // 5mm & 24mm Dia // IPS #1258-1259 - Manufacturer: Guhring. 2nd Dia: 24mm. Length: 24mm. 1st Dia: 5mm. Shank Dia : 16.5mm. Part # PT57A03257. This item is from our inventory and is used.
- Guhring // Carbide Step Reamer / Square Drive // 19mm & 25mm Dia // IPS #1254 - Manufacturer: Guhring. 1st Dia: 19mm. 2nd Dia: 25mm. Square Drive: 18.75mm. This item is from our inventory and is new (open box). Part # WAB0000EM-T-5152.
- Guhring // Carbide Step Reamer / Square Drive // 19mm & 25mm Dia // IPS #1255 - Manufacturer: Guhring. 1st Dia: 19mm. 2nd Dia: 25mm. Square Drive: 18.75mm. Part # WAB0000EM-T-5152.
- Guhring // Brazed Carbide Reamer / Square Drive // 18mm Dia // IPS #1253 - Square Drive: 18.75mm. Part # WAB0000EM-T-0003.
- Guhring // Carbide Step Reamer/Square Drive // 14mm & 18mm Dia // IPS #1252 - Manufacturer: Guhring. 1st Dia: 14mm. 2nd Dia: 18mm. Square Drive: 18.75mm. Part # WAB0000EM-T-0151.
- Guhring // Solid Carbide Drill // 11.77mm Dia // IPS #1230 - Manufacturer: Guhring. Dia: 11.77mm. Shank Dia: 14mm. Tech Condition.
- Guhring // Solid Carbide Drill // 11.57mm Dia // IPS #1246 - Manufacturer: Guhring. Dia: 11.57mm. Shank Dia: 14mm. Tech Condition.
- Guhring // Solid Carbide Step Drill // 8.5mm & 14mm Dia // IPS #1239 - Manufacturer: Guhring. 2nd Dia: 14mm. Shank Dia: 14mm. 1st Dia: 8.5mm. Tech Condition.
- Guhring // Coated Solid Carbide Reamers (Pack of 6) // 7.968mm Dia // IPS #1248 - Manufacturer: Guhring. Dia: 7.968mm. Shank Dia: 8mm. This item is from our inventory and is new (open box).
- Guhring // Carbide Step Drill / Spot Face // 24.6mm Dia // IPS #1244 - #1245 - Manufacturer: Guhring. 1st Dia: 11mm Length: 17mm. 2nd Dia: 12.5mm Length: 21mm. 3rd Dia: 24.6. Shank Dia: 20mm. Part # PT380242671. Tech Condition.
- Guhring // Carbide Step Drill / Spot Face // 12.5 & 25mm Dia // IPS #1241- #1243 - Manufacturer: Guhring. 2nd Dia: 25mm. 1st Dia: 12.5mm. 1st Dia Length: 17mm. Shank Dia: 20mm. Part # PT380242661. Tech Condition.
- Guhring // Solid Carbide Step Drill // 7mm & 9mm Dia // IPS #1240 - Manufacturer: Guhring. 2nd Dia: 9mm. 1st Dia: 7mm. Shank Dia: 10mm. Tech Condition.
- Walter / Valenite // Indexable End Mill // 26mm +/- Dia // IPS #1237 - #1238 - Dia: 26mm +/-. Shank Dia: 25mm. Part # F2237-6144325. Tech Condition This item is from our inventory and is new (open box).
- Guhring // Carbide Step Drill / Spot Face // 24.6mm Dia // IPS #1234 - #1236 - Manufacturer: Guhring. 1st Dia: 12mm Length: 21mm. 2nd Dia: 12.5mm Length: 21mm. 3rd Dia: 24.6. Shank Dia: 20mm. Part # 10862361. Tech Condition.
- Guhring // Solid Carbide / PCD Tipped Reamer // 15mm Dia // IPS #1231 - #1233 - Manufacturer: Guhring. Shank Dia: 16mm.
- T.M. Smith Tool holder 221-217SL - Condition is New.
- T.M. Smith Tool holder EX52-010-0-0 - Condition is New.
- T.M. Smith Tool holder TMS-NTLA 52-010-0-0 - Condition is New.
- T.M. Smith Tool holder 52-702-243 (92457252) - Condition is New.
- Allied Machine // Indexable Drill / Spot Face // 12.8mm Dia // IPS #1229 - Manufacturer: Allied Machine and Engineering Corp. Dia: 12.8mm. 1st Dia Length: 22mm. Shank Dia: 22mm. Part # 060306-33. Tech Condition.
- Guhring // Solid Carbide Step Drill // 10.526mm & 13mm Dia // IPS #1227 - Manufacturer: Guhring. 2nd Dia: 13mm. Shank Dia: 13mm. 1st Dia: 10.526mm. Tech Condition.
- Guhring // Solid Carbide Step Drill // 6.86mm & 9mm Dia // IPS #1228 - Manufacturer: Guhring. 2nd Dia: 9mm. 1st Dia: 6.86mm. Shank Dia: 10mm. Tech Condition.
- Guhring // Solid Carbide Drill // 13.6mm Dia // IPS #1226 - Manufacturer: Guhring. Dia: 13.6mm. Shank Dia: 14mm. Tech Condition.
- Guhring // Solid Carbide Step Drills (3 pack) // 6mm & 7.5mm Dia // IPS #1225 - Manufacturer: Guhring. 1st Dia: 6mm. 2nd Dia: 7.5mm. Shank Dia: 8mm. This item is from our inventory and is new (open box).
- Seco // Indexable End Mill // 17.5mm Dia // IPS #1222 - Manufacturer: Seco. Dia: 17.5mm. Shank Dia : 20mm. Part # SD52 -17.5-35-20R4. Tech Condition This item is from our inventory and is used (like new).
- Ingersoll Cutting Tool Co // Brazed Carbide End Mill // 50.8mm Dia // IPS #1221 - Manufacturer: Ingersoll Cutting Tool Co. Shaft Dia. Part # 44E200381R0001. Tech Condition This item is from our inventory and is used (like new).
- Drill with Adapter // 18.5mm Dia // IPS #1220 - Shaft Dia. Tech Condition.
- Specialty Tools Inc // Solid Carbide End Mill // 6mm Dia // IPS #1219 - Shaft Dia. Manufacturer: Specialty Tools Inc. Part # 74E0606S0R0001. Tech Condition This item is from our inventory and is used (like new).
- Valenite // Mill Holder // HSK100A // IPS #655 - Adaption: HSK100A Automatic. Manufacturer: Valenite. Part # HSK100A-SM250-325.
- Mapal // Boring/Reaming Tool // HSK32 // 31.34 Dia. // IPS #521 - Adaption: HSK32. Manufacturer: Mapal.
- Mapal // Boring/Reaming Tool // HSK32 // 31.34 Dia. // IPS #520 - Adaption: HSK32. Manufacturer: Mapal.
- Mapal // Boring/Reaming Tool // HSK32 // 31.34 Dia. // IPS #519 - Adaption: HSK32. Manufacturer: Mapal.
- Mapal // Boring/Reaming Tool // HSK32 // 31.34 Dia. // IPS #518 - Adaption: HSK32. Manufacturer: Mapal.
- Solid Carbide End Mill // 6mm Dia // IPS #1218 - Shaft Dia. Part # 74E0610S0R0001. Tech Condition This item is from our inventory and is used.
- Robb - Jack Tool Co // Solid Carbide End Mill // 20mm Dia // IPS #1216 - Manufacturer: Robb - Jack Tool Co. Shaft Dia. Part # MNR-204-20. Tech Condition This item is from our inventory and is used.
- M C Carbide Tool Co // Solid Carbide Drill // 8mm Dia // IPS #1212 - Shaft Dia. Tech Condition.
- Solid Carbide Drill // 9.3mm Dia // IPS #1211 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Drill // 9.3mm Dia // IPS #1209 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Twist Reamer // 10.3mm Dia // IPS #1208 - Shaft Dia. Part # 79211-35-401-0. This item is from our inventory and is used.
- Starcut // PCD Step Reamer // 18.5mm & 22mm Dia // IPS #781 - Manufacturer: Starcut. Shaft Dia.
- Starcut // PCD Reamer // 16.4mm Dia // IPS #783 - Manufacturer: Starcut. Shaft Dia.
- Starcut // PCD Reamer // 7.8mm Dia // IPS #782 - Manufacturer: Starcut. Shaft Dia.
- M C Carbide Co. // Solid Carbide Step Drill // 15.6mm & 17.4mm Dia // IPS #1207 - Shaft Dia. Length 30.5mm. Tech Condition.
- HAM Precision // Solid Carbide Step Drill // 20.5mm & 22.2mm Dia // IPS #1206 - Manufacturer: HAM Precision. Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 8.7mm Dia // IPS #1204 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Drill // 8mm Dia // IPS #1203 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Drill // 8mm Dia // IPS #1202 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Drill // 8mm Dia // IPS #1201 - Shaft Dia. Tech Condition.
- Solid Carbide Reamer // 5.1mm Dia // IPS #1200 - Shaft Dia.
- M C Carbide Tool Co // Solid Carbide Twist Reamer // 12.2mm Dia // IPS #789 - Shaft Dia. Total Length 262mm. Part # 79207-35-401-0. This item is from our inventory and is used (like new).
- M C Carbide Tool Co // Solid Carbide Step Drill // 7.2mm & 9mm Dia // IPS #779 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 7.2mm & 9mm Dia // IPS #780 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Drill // 8mm Dia // IPS #778 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Reamer // 9 / 10.1 / 11 mm Dia // IPS #777 - Shaft Dia. Length 32.8mm. Length 14.4mm.
- Solid Carbide Drill // 12.3mm Dia // IPS #771 - Shaft Dia. Tech Condition.
- Solid Carbide Drill // 13.3mm Dia // IPS #767 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Drill // 9mm Dia // IPS #776 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Twist Reamer // 10.25mm Dia // IPS #775 - Shaft Dia. Part # 79211-35-401-0. This item is from our inventory and was used once (like new).
- Durapoint // Solid Carbide Drill // 3.2mm Dia // IPS #773 - Manufacturer: Durapoint. Shaft Dia. Tech Condition.
- Durapoint // Solid Carbide Step Drill // 5mm & 6mm Dia // IPS #769 - Manufacturer: Durapoint. Shaft Dia. Tech Condition.
- Guhring // Solid Carbide Step Reamer // 8.5mm & 13.245mm Dia // IPS #765 - Manufacturer: Guhring. Shaft Dia.
- M C Carbide Tool Co // Solid Carbide 3 Step Drill // 7.4/9/14 mm Dia // IPS #763 - Shaft Dia. Length 25.7mm. Length 14.4mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide 3 Step Drill // 7.4/9/14 mm Dia // IPS #762 - Shaft Dia. Length 25.7mm. Length 14.4mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide 3 Step Drill // 7.4/9/14 mm Dia // IPS #761 - Shaft Dia. Length 25.7mm. Length 14.4mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide End Mill // 20mm Dia // IPS #760 - Shaft Dia. Part # 79198-37-400. Tech Condition This item is from our inventory and is used.
- M C Carbide Tool Co // Solid Carbide End Mill // 20mm Dia // IPS #759 - Shaft Dia. Part # 79198-37-400. Tech Condition This item is from our inventory and is used (like new).
- M C Carbide Tool Co // Solid Carbide Step Drill // 7.4mm & 9mm Dia // IPS #757 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 7.4mm & 9mm Dia // IPS #758 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 8mm & 9mm Dia // IPS #756 - Shaft Dia. Length 33.2mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 8mm & 9mm Dia // IPS #755 - Shaft Dia. Length 33.2mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 8.5mm & 11mm Dia // IPS #754 - Shaft Dia. Length 32.4mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 8.5mm & 11mm Dia // IPS #753 - Shaft Dia. Length 32.4mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Drill // 10.25mm Dia // IPS #752 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Drill // 22.7mm Dia // IPS #751 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Twist Reamer // 9.3mm Dia // IPS #750 - Shaft Dia. This item is from our inventory and is new (open box).
- M C Carbide Tool Co // Solid Carbide Reamer // 14.9mm & 15.9mm Dia // IPS #747 - Shaft Dia.
- M C Carbide Tool Co // Solid Carbide Reamer // 14.9mm & 15.9mm Dia // IPS #748 - Shaft Dia.
- M C Carbide Tool Co // Solid Carbide End Milll // 15mm Dia // IPS #746 - Shaft Dia. Tech Condition This item is from our inventory and is used.
- M C Carbide Tool Co // Solid Carbide Step Drill // 10mm & 17mm Dia // IPS #744 - Shaft Dia. Length 28.2mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 10mm & 17mm Dia // IPS #745 - Shaft Dia. Length 28.2mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 5.5mm & 7mm Dia // IPS #743 - Shaft Dia. Length 24.5mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Reamer // 14.8mm & 15.8mm Dia // IPS #741 - Shaft Dia. Length 19.4mm.
- M C Carbide Tool Co // Solid Carbide Reamer // 14.8mm & 15.8mm Dia // IPS #742 - Shaft Dia. Length 19.4mm.
- M C Carbide Tool Co // Solid Carbide Step Drill // 7.4mm & 9mm Dia // IPS #740 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 7.4mm & 9mm Dia // IPS #739 - Shaft Dia. Length 25.8mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 7.4mm & 9mm Dia // IPS #738 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 9.2mm & 11mm Dia // IPS #737 - Shaft Dia. Length 35.5mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Drill // 13mm Dia // IPS #736 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 9.5mm & 11mm Dia // IPS #735 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 5.5mm & 9.5mm Dia // IPS #734 - Shaft Dia. Length 22.5mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 7.4mm & 9mm Dia // IPS #733 - Shaft Dia. Length 12.4mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Reamer // 6.4mm & 7.5mm Dia // IPS #732 - Shaft Dia. Length 13.5mm.
- M C Carbide Tool Co // Solid Carbide Step Drill // 5.6mm & 7mm Dia // IPS #731 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 7.35m & 9mm Dia // IPS #730 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 7.35mm & 9mm Dia // IPS #729 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide End Mill // 15mm Dia // IPS #727 - Shaft Dia. Part # 79198-38-400. Tech Condition This item is from our inventory and is new (open box).
- M C Carbide Tool Co // Solid Carbide Twist Reamer // 9.3mm Dia // IPS #728 - Shaft Dia. This item is from our inventory and is used (like new).
- M C Carbide Tool Co // Solid Carbide Step Drill // 9.2mm & 17.2mm Dia// IPS #726 - Shaft Dia. Length 28.5mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 8.75mm & 11mm Dia // IPS #725 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 5.7mm & 7mm Dia // IPS #704 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 11mm & 13mm Dia // IPS #723 - Shaft Dia. Length 31.5mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 7.4mm & 9mm Dia // IPS #722 - Shaft Dia. Length 25.8mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 7.4mm & 9mm Dia // IPS #721 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 9.2mm & 11mm Dia // IPS #719 - Shaft Dia. Length 35.5mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 9.2mm & 11mm Dia // IPS #718 - Shaft Dia. Length 35.5mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 9mm & 11.3mm Dia // IPS #717 - Shaft Dia. Length 35.5mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 9.2mm & 11mm Dia // IPS #716 - Shaft Dia. Length 35.5mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Drill // 13mm Dia // IPS #715 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 9.5mm & 11mm Dia // IPS #714 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 5.6mm & 7mm Dia // IPS #713 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 5.6mm & 7mm Dia // IPS #712 - Shaft Dia. Length 24.6mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 5.7mm & 7mm Dia // IPS #711 - Shaft Dia. Length 24.2mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 6mm & 7mm Dia // IPS #710 - Shaft Dia. Length 24.6mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 6mm & 7mm Dia // IPS #709 - Shaft Dia. Length 24.6mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 6mm & 7mm Dia // IPS #708 - Shaft Dia. Length 24.6mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Reamer // 5.9mm & 7.5mm Dia // IPS #707 - Shaft Dia. Length 13.5mm.
- M C Carbide Tool Co // Solid Carbide Step Drill // 5.5mm & 9.5mm Dia // IPS #706 - Shaft Dia. Length 22.5mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 7.4mm & 9mm Dia // IPS #705 - Shaft Dia. Length 12.4mm. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 5.6mm & 7mm Dia // IPS #703 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 5.5mm & 7mm Dia. // IPS #702 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 5.5mm & 6.5mm Dia // IPS #701 - Shaft Dia. Tech Condition.
- M C Carbide Tool Co // Solid Carbide Step Drill // 4.7mm & 7.5mm Dia // IPS #700 - Shaft Dia. Length 5mm. Overall Length 58.5mm. Tech Condition.
- Multi Bore // Hydraulic Tool Holder // 209 045 // IPS #662 - Part # 209 045. Manufacturer: Multi Bore. 14.5mm drill Included.
- Sandvik Coromant // Adjustable Boring Tool // 39150S/780 80300 39843 // IPS #515 - Manufacturer: Sandvik Coromant. Adjustable Boring Tool. Key Width 16mm.
- Sandvik Coromant // Adjustable Boring Tool // 33141 192-453231 R13 // IPS #516 - Part # 33141 192-453231 R13. Manufacturer: Sandvik Coromant. Adjustable Boring Tool. Key Width 16mm.
- Sandvik Coromant // Adjustable Boring Tool // 46795 192-452999 R130 // IPS #517 - Part # 46795 192-452999 R130. Manufacturer: Sandvik Coromant. Key Width 16mm.
- Erickson // Collet Chuck Tool Holder // HSK100A ER20100M // IPS #329 - Part # HSK100A ER20100M. Manufacturer: Erickson.
- Erickson // Collet Chuck Tool Holder // HSK100A ER20100M // IPS #328 - Part # HSK100A ER20100M. Manufacturer: Erickson.
- Erickson // Hydraulic Tool Holder // HSK100A AHC14095M // IPS #324 - Part # HSK100A AHC14095M. Manufacturer: Erickson. Balluff Tool Chip Included.
- Erickson // Hydraulic Slim Line Tool Holder // HSK100A HCSL12200M // IPS #326 - Part # HSK100A HCSL12200M. Manufacturer: Erickson. This item is from our inventory and is used (like new).
- Erickson // Hydraulic Tool Holder // HSK100A AHC14150M // IPS #323 - Part # HSK100A AHC14150M. Manufacturer: Erickson. Balluff Tool Chip Included.
- Erickson // Shrink Chuck Tool Holder // HSK100A HPVTT10090M // IPS #327 - Part # HSK100A HPVTT10090M. Manufacturer: Erickson. Balluff Tool Chip Included.
- Erickson // Hydraulic Slim Line Tool Holder // HSK100A HCSL12200M // IPS #325 - Part # HSK100A HCSL12200M. Manufacturer: Erickson. This item is from our inventory and is used (like new). Balluff Tool Chip Included.
- Ingersoll Cutting Tool // End Mill Holder // 764H031-05 65514-J // IPS #76 - 21mm Drill Included. Shank Form F. Part # 764H031-05 65514-J. Tech Condition.
- Ingersoll Cutting Tool // End Mill Holder // 764H031-05 10789-C // IPS #75 - Shank Form F. Part # 764H031-05 10789-C. Tech Condition This item is from our inventory and is used.
- Ingersoll Cutting Tool // End Mill Holder // 764H031-05 10789-C // IPS #74 - Brazed 22mm End Mill Included. Shank Form F. Part # 764H031-05 10789-C. Tech Condition.
- 1PCS New For MITSUBISHI Tension Detector input Adapter LM-10WA-TAD - PLC and module. sensor switch. Pictures of Item. Photoelectric switch. Proximity switch. Motor and encoder.
- Sandvik Varilock 391.01-80 80 080 Size 80 80mm Modular Tool Extension, Used Good - Used in good condition.
- Seco Modular Tool Holding System Adapter Graflex 6 2.283" Body Diam 76741 - Model: 76741. Modular System Size Graflex 6. Cab M Bin 9. Item appears to be in good condition. However item has wear from previous use. SOLD AS IS.
- Sandvik Coromant Varilock R331.96-12V50-16AA Mill
- Iscar HP E90AN D1.0-7-W.75-7 - You are purchasing an Iscar HP E90AN D1.0-7-W.75-7 tool. Condition is Used. Please review all of the available images carefully before your purchase. Shipped with USPS Flat Rate Envelope. CN ST837Q
- Horn Groove Cartridge Cassette RNK224.3215.05 (115)
- Kennametal End Mill Adapter HSK63AEM100375 1" Dia 3.75" Gage Length - The 1" Dia. bore is perfect. Loc 5/10/1.
- New Kennametal End Mill Adapter HSK63AEM075375 3/4" Bore
- New Kennametal End Mill Holder HSK63AEM125425 1-1/4" ID 4.25" Gage Lngth 1015227 - SAP Material Number 1015227. ISO Catalog Number HSK63AEM125425. [L1] Gage Length 107.9500 mm. Clamp Screw ID Drive Size 3/8.
- VALENITE // High Precision Adjustable Boring Head // 10-ZE-1852 // IPS #514 - Manufacturer: Valenite. Pilot OD Dia. This item is from our inventory and is used. Part # 10-ZE-1852.
- KENNAMETAL // Indexable End Mill // 24.9mm Dia // 25E02R070A25RD10 // IPS #636 - Part # 25E02R070A25RD10. Cutter Dia. Tool Shank Dia. This item is from our inventory and is used but in like new condition.
- VALENITE // Indexable End Mill // 25.4mm Dia // 539.63.226 // IPS #635 - Manufacturer: Valenite. Cutter Dia. Tool Shank Dia. Part # 539.63.226. This item is from our inventory and is used but in like new condition. Tech Condition.
- INGERSOLL // Indexable End Mill // 25.4mm Dia // 12V2B1080R02 // IPS #637 - Part # 12V2B1080R02. Manufacturer: Ingersoll. Cutter Dia. Tool Shank Dia. This item is from our inventory and is used but in like new condition. Tech Condition.
- KOMET // Extension Adapter // Tool Shank Dia 16mm // A20 10430 // IPS #660 - Part # A20 10430. Tool Shank Dia. Pilot Dia. This item is from our inventory and is used.
- INGERSOLL // Indexable Milling Cutter // 28.2mm Dia // N110017S0R02 // IPS #631 - Part # N110017S0R02. Manufacturer: Ingersoll Cutting Tool. Cutter Dia. Tool Shank Dia.
- INGERSOLL // Indexable End Mill // 12J1B1581R01 // IPS #625 - Part # 12J1B1581R01. Manufacturer: Ingersoll Cutting Tool. Tech Condition This item is from our inventory and is used.
- INGERSOLL // Indexable Drill // 25.4mm Dia // A10004021RS1 // IPS #629 - Part # A10004021RS1. Manufacturer: Ingersoll Cutting Tool. Cutter Dia. Tool Shank Dia. Tech Condition.
- MAPAL // Modular Boring Tool Head // 12-38-006967 // IPS #623 - Manufacturer: Mapal. Tool Shank Dia. This item is from our inventory and is used. Part # 12-38-006967.
- INGERSOLL // Modular Milling Tool Head // 74R3132S0R0001 // IPS #621 - Part # 74R3132S0R0001. Manufacturer: Ingersoll Cutting Tool. Tool Shank Dia. This item is from our inventory and is used.
- Modular Boring Tool Head // DMA 122H5R03 // IPS #624 - Part # DMA 122H5R03. Tool Shank Dia. This item is from our inventory and is used.
- INGERSOLL // Modular Milling Tool Head - No Ret Pin // 74R3132S0R0001 //IPS #622 - Part # 74R3132S0R0001. Manufacturer: Ingersoll Cutting Tool. Missing Retention Pin. Tool Shank Dia. This item is from our inventory and is used.
- INGERSOLL // Indexable Boring Cutter // 34.2mm Dia // 16S1B1368R02 // IPS #627 - Part # 16S1B1368R02. Manufacturer: Ingersoll Cutting Tool. Cutter Dia. Tool Shank Dia.
- T&D // Adjustable Precision Boring Tool // 15.875mm Dia// SS046-51-52 //IPS #628 - Cutter Dia. Tool Shank Dia.
- KOMET // Modular Boring Tool Head // UB8501640 // IPS #620 - Part # UB8501640. Tool Shank Dia. This item is from our inventory and is used.
- ISCAR // CAT50 // ER32 Collet Chuck // CAT50 ER32x6.000 E // IPS #397 - Part # CAT50 ER32x6.000 E. Adaption: CAT50. Manufacturer: Iscar.
- KOMET // CAT50 // Modular Tool Holder // ABS 100 CAT 50 A5210380 // IPS #386 - Part # ABS 100 CAT 50 A5210380. Adaption: CAT50. Tool Shank Dia.
- ERICKSON // BT50 // ER32 Collet Chuck // BT50BER32070M // IPS #399 - Part # BT50BER32070M. Adaption: BT50. Manufacturer: Erickson.
- ISCAR // CAT50 // Power Chuck Tool Holder // CAT50 MAXIN 3/4x4.13 E // IPS #393 - Part # CAT50 MAXIN 3/4x4.13 E. Adaption: CAT50. Manufacturer: Iscar. Tool Shank Dia. This item is from our inventory and is used. Tech Condition.
- ISCAR // CAT50 // ER20 Collet Chuck // CAT50 ER20x3.937 E // IPS #380 - Part # CAT50 ER20x3.937 E. Adaption: CAT50. Manufacturer: Iscar.
- ISCAR // CAT50 // ER20 Collet Chuck // CAT50 ER20x3.937 E // IPS #396 - Part # CAT50 ER20x3.937 E. Adaption: CAT50. Manufacturer: Iscar.
- ERICKSON // BT50 // End Mill Holder // BT50EM12080M // IPS #398 - Part # BT50EM12080M. Adaption: BT50. Manufacturer: Erickson. Tech Condition This item is from our inventory and is used.
- MICROBORE // CAT50 // End Mill Holder & Carbide Mill // 50CT-AE200-55// IPS #392 - Adaption: CAT50. Manufacturer: Microbore. Part # 50CT-AE200-55. Tech Condition.
- ISCAR // CAT50 // End Mill Holder // CAT50 EM 1-1/4x4.000 E // IPS #387 - Adaption: CAT50. Part # CAT50 EM 1-1/4x4.000 E. Manufacturer: Iscar. Tech Condition This item is from our inventory and is used.
- ISCAR // CAT50 // End Mill Holder // CAT50 EM 1/2x2.625 E // IPS #394 - Adaption: CAT50. Part # CAT50 EM 1/2x2.625 E. Manufacturer: Iscar. Tech Condition This item is from our inventory and is used.
- ISCAR // CAT50 // End Mill Holder // CAT50 EM 5/8x3.750 E // IPS #385 - Adaption: CAT50. Part # CAT50 EM 5/8x3.750 E. Manufacturer: Iscar. 15.8mm End Mill Tool Included. Tech Condition.
- ISCAR // CAT50 // End Mill Holder // CAT50 EM 1/2x2.625 E // IPS #383 - Adaption: CAT50. Part # CAT50 EM 1/2x2.625 E. Manufacturer: Iscar. 13mm End Mill Tool Included. Tech Condition.
- ISCAR // CAT50 // End Mill Holder // CAT50 EM 3/4x3.750 E // IPS #382 - Adaption: CAT50. Part # CAT50 EM 3/4x3.750 E. Manufacturer: Iscar. 18.8mm End Mill Tool Included. Tech Condition.
- ISCAR // CAT50 // End Mill Holder // CAT50 EM 1/2x2.625 E // IPS #381 - Adaption: CAT50. Part # CAT50 EM 1/2x2.625 E. Manufacturer: Iscar. 12.8mm 90 Degree Counter Sink Tool Included. Tech Condition.
- ISCAR // CAT50 // End Mill Holder // CAT50 EM 1x4.000 E // IPS #391 - Part # CAT50 EM 1x4.000 E. Adaption: CAT50. Manufacturer: Iscar. Tech Condition This item is from our inventory and is used.
- COLLIS // CAT50 // Shell Mill Holder // 50VF .750 SM 1.5 PRO F8 // IPS #379 - Part # 50VF. 750 SM 1.5 PRO F8. Adaption: CAT50. Manufacturer: Collis.
- SECO // CAT50 // Shell Mill Holder // E3471 552 52740 // IPS #389 - Part # E3471 552 52740. Adaption: CAT50. Manufacturer: Seco. Seco 63mm Face Mill Cutter Included. Part # R220.21-0063-R160.4A.
- ISCAR // CAT50 // Shell Mill Holder // SEM 1 CF4 C E 4506112 // IPS #388 - Part # SEM 1 CF4 C E 4506112. Adaption: CAT50. Manufacturer: Iscar.
- SECO // CAT50 // Shell Mill Holder // F3471 552 516100 // IPS #395 - Part # F3471 552 516100. Adaption: CAT50. Manufacturer: Seco.
- Renishaw MP12 Probe // OMM Receiver // MI12 Interface Unit // IPS #640 - MI12 Interface Unit # S17665. MP12 Probe # S02440 with HSK 100A Holder. Pictures show MP12 probe powered up with trip signal. Pictures show MI 12 in Error mode when MP12 probe is. OMM Signal Receiver # S10509.
- Kennametal C185454R01 Left Hand Modular Indexing Boring Head - MPN: C185454R01. Will there be a dock or forklift. Prefer to pick it up yourself?. Warehouse Location: M1822. To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly.
- Kennametal C-185454 LH Indexing Insert Modular Boring Head Lot Of 2 - MPN: C-185454 LH. Will there be a dock or forklift. Prefer to pick it up yourself?. Weight (lbs, oz): 5. Warehouse Location: M1822. To get a freight quote we will need to know the following Need it urgently?.
- Kennametal C-185454 Modular Indexing Insert Boring Head - Will there be a dock or forklift. Prefer to pick it up yourself?. Weight (lbs, oz): 5. Warehouse Location: L2455. To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly.
- Kennametal C185455RH Right Hand Modular Indexing Boring Head - MPN: C185455RH. Will there be a dock or forklift. To get a freight quote we will need to know the following Prefer to pick it up yourself?. Warehouse Location: M3915. Need it urgently?. Call us and we will do what we can to get it to you quickly.
- Kennametal KV45 CAL625 Jarno #18 Taper Indexing Insert Tool Holder - MPN: KV45 CAL625. Prefer to pick it up yourself?. Weight (lbs, oz): 8. Size: Length: 6 in. Width: 6 in. Height: 10 in. To get a freight quote we will need to know the following We choose the carrier.
- Kennametal C 185456 R00 Indexing Insert Modular Boring Head Lot Of 2 - MPN: C 185456 R00. Will there be a dock or forklift. Prefer to pick it up yourself?. Weight (lbs, oz): 5. Warehouse Location: M1822. To get a freight quote we will need to know the following Need it urgently?.
- Kennametal KV45HA32575 Indexing Insert Modular Boring Head Adapter 5" Proj. - MPN: KV45HA32575. Will there be a dock or forklift. Prefer to pick it up yourself?. Weight (lbs, oz): 8. Warehouse Location: L2454. To get a freight quote we will need to know the following Need it urgently?.
- Kennametal C 185455-R01 Indexing Insert Modular Boring Head Lot Of 2 - Will there be a dock or forklift. Prefer to pick it up yourself?. Weight (lbs, oz): 4. Warehouse Location: L2455. one is in better condition, see photos. To get a freight quote we will need to know the following.
- Kennametal KV45 HA32 475 Indexing Insert Modular Boring Head Adapter 5" Proj. - MPN: KV45 HA32 475. Will there be a dock or forklift. Prefer to pick it up yourself?. Weight (lbs, oz): 6. Warehouse Location: M1822. To get a freight quote we will need to know the following Need it urgently?.
- Kennametal KV45CAR625 Jarno #18 Taper Boring Bar Tool Holder - MPN: KV45CAR625. Prefer to pick it up yourself?. To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly. SKU: 171299.
- Jarno #18 Taper 1" Square Boring Bar Holder Coolant Thru Missing Cover - 1-1/2" center line projection, 2" overall projection. Prefer to pick it up yourself?. Weight (lbs, oz): 5. To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly.
- Kennametal KV45CAR625 Jarno #18 Taper Indexing Insert Boring Bar Tool Holder - MPN: KV45CAR625. Prefer to pick it up yourself?. Weight (lbs, oz): 9. To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly.
- Jarno #18 Taper 1" Square Boring Bar Holder Coolant Thru - 1-1/2" center line projection, 2" overall projection. Prefer to pick it up yourself?. Weight (lbs, oz): 6. Need it urgently?. Call us and we will do what we can to get it to you quickly. To get a freight quote we will need to know the following.
- Kennametal C 185456 R01 Indexing Insert Boring Head Lot Of 2 - MPN: C 185456 R01. Will there be a dock or forklift. Prefer to pick it up yourself?. Weight (lbs, oz): 5. Warehouse Location: L2455. To get a freight quote we will need to know the following Need it urgently?.
- Kennametal KV45 HA32 575 Modular Boring Head Adapter 5" Projection - MPN: KV45 HA32 575. Will there be a dock or forklift. Prefer to pick it up yourself?. Warehouse Location: L2455. To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly.
- Kennametal C185453 R01 Modular Indexing Boring Head - MPN: C185453 R01. Will there be a dock or forklift. Prefer to pick it up yourself?. Warehouse Location: M1822. To get a freight quote we will need to know the following Need it urgently?. Call us and we will do what we can to get it to you quickly.
- Kennametal C 185456 R00 LH Indexing Insert Modular Boring Head Lot Of 2 - MPN: C 185456 R00 LH. Will there be a dock or forklift. Prefer to pick it up yourself?. Weight (lbs, oz): 5. Warehouse Location: M1822. To get a freight quote we will need to know the following Need it urgently?.
- Kennametal KV45HA32575 Indexing Insert Modular Boring Head Adapter 5" Proj. - MPN: KV45HA32575. Will there be a dock or forklift. Prefer to pick it up yourself?. Weight (lbs, oz): 8. Warehouse Location: M1822. To get a freight quote we will need to know the following Need it urgently?.
- Kennametal C-185454 LH Left Hand Modular Indexing Insert Boring Head - MPN: C-185454 LH. Will there be a dock or forklift. Prefer to pick it up yourself?. Weight (lbs, oz): 3. Warehouse Location: M1822. missing clamp but in otherwise good condition. To get a freight quote we will need to know the following.
- ERICKSON // BT50 Clam Shell Mill Holder // BT50 BSM2C22100M // IPS #377 - Part# BT50 BSM2C22100M. Manufacturer: Erickson.
- SANDVIK // CAT50 Collet Chuck Tool Holder // AA3B14-50 32 105 // IPS #376 - Manufacturer: Sandvik. Part# AA3B14-50 32 105. Tool Shank ID 8mm.
- ERICKSON // BT50 Collet Chuck Tool Holder // BT50 BER32070M // IPS #378 - Part# BT50 BER32070M. Manufacturer: Erickson.
- ERICKSON // BT50 Collet Chuck Tool Holder // BT50 BER32070M // IPS #374 - Part# BT50 BER32070M. Manufacturer: Erickson. Tool Shank ID 4mm.
- VALENITE // BT50 Collet Chuck Tool Holder // BT50-10SG-105 // IPS #372 - Manufacturer: Valenite.
- Guhring GM300 4736 14,050 Used Toolholder - HSK 50 A/ 14,000.
- Valenite/Modco Face Mill // 355.6mm Dia // M1010485 / MXP1017411 // IPS #415 - Part# M1010485 Valenite /MXP1017411 Modco. Manufacturer: Valenite/ Modco. 355.6mm Dia. 38. 1mm Length. Pilot Dia. This item is from our inventory and is used.
- RENISHAW RMP40 Touch Probe // E79603 // IPS #641 - Part # E79603. Manufacturer: Renishaw. This item is from our inventory and is used.
- VALENITE Indexable Drill // 28.mm Dia // VWDR-110-125-492 // IPS #720 - Manufacturer: Valenite. Small chip on tool body. Tech Condition.
- GUHRING BT40 Hydraulic Expansion Holder // 16,32mm Dia // 0204465 // IPS #369 - Part # 0204465. Manufacturer: Guhring. 16, 32mm Dia.
- VALENITE BT40 End Mill Holder // 25mm Pilot ID // BT40-E100-400 // IPS #366 - Manufacturer: Valenite. 25mm Pilot ID. Part # BT40-E100-400. Tech Condition.
- PRECITOOL-KOSTA SK40 Drill Chuck // 1-13mm Dia // SK 40/1-13 // IPS #368 - Part # SK 40/1-13. 1-13mm Dia. Tech Condition.
- VALENITE BT40 Shell Mill Holder // 38mm Pilot OD // BT40-S150-240 // IPS #363 - Manufacturer: Valenite. 38mm Pilot OD. Part # BT40-S150-240.
- VALENITE Tool Holder // BT40 ER16 8mm Chuck // BT40-SAC16-100A // IPS #362 - ER16 8mm Chuck. Manufacturer: Valenite.
- VALENITE BT40 End Mill Holder // 25mm Pilot ID // BT40-E100-400 // IPS #367 - Manufacturer: Valenite. 25mm Pilot ID. Part # BT40-E100-400. Tech Condition This item is from our inventory and is used.
- LINDEX Tool Holder // ER32 10mm Collet // C4007-0032 // IPS #361 - Manufacturer: Lindex. ER32 10mm Collet.
- INGERSOLL End Mill // 25.4mm Dia // 12J1Q1084R01 // IPS #671 - Part # 12J1Q1084R01. Manufacturer: Ingersoll Cutting Tool. 25.4mm Dia. Tech Condition This item is from our inventory and is used.
- End Mill // 32mm Dia // HSK100A // IPS #670 - Part # Unknown. Tech Condition This item is from our inventory and is used.
- HSK 63 // End Mill Tool // 19.mm Dia // IPS #603 - Tool Holder Part # Unknown. Tech Condition This item is from our inventory and is used.
- GUHRING Slotter // 101.6mm Dia // 12949431 // IPS #602 - Part # 12949431. Manufacturer: GUHRING. 101.6mm Dia.
- EMUGE Spot Face // 36.mm Dia // GX8AC001.1036 // IPS #601 - Spot Face Cutter: GX8AC001.1036. Manufacturer: EMUGE. Balluff Tool Chip Included. Part # GX8AA004.6310. This item is from our inventory and is used.
- MICROBORE // Adjustable Boring Bar // SS10-56C // IPS #511 - Manufacturer: MICROBORE. This item is from our inventory and is used.
- MICROBORE // Adjustable Boring Bar // SS10-56C // IPS #510 - Manufacturer: MICROBORE. This item is from our inventory and is used.
- KENNAMETAL End Mill Holder // 31.7mm ID // HSK100A EM125425 // IPS #322 - Part # HSK100A EM125425. 31.7mm ID 133.4mm Length. Tech Condition This item is from our inventory and is used.
- Mapal HSK 100A Probe Adapter // MN 5094-10-K // IPS #321 - Manufacturer: Mapal. Part # MN 5094-10-K.
- INGERSOLL Face Mill // 99.85mm Dia // 16L1E3999R02 // IPS #404 - Part # 16L1E3999R02. 99.85mm Dia. This item is from our inventory and is used.
- INGERSOLL Face Mill // 202.mm Dia // 6K6H08R06 // IPS #403 - Part # 6K6H08R06. Ingersoll Cutting Tool HSK80A 764C061-02. 38.1mm Length. Keyway Width 25.4mm. This item is from our inventory and is used.
- INGERSOLL (FLEX LOK) Face Mill // 101.6mm Dia // 6X1V-04R01 // IPS #420 - 101.6mm Dia. 50.8mm Length. Part # 6X1V-04R01. This item is from our inventory and is used.
- INGERSOLL Face Mill // 152.4mm Dia // 6X4B06R01 // IPS #426 - Part # 6X4B06R01. 152.4mm Dia. 60.325mm Length. Pilot Dia. This item is from our inventory and is used. Inserts (2) GDE323.
- Valenite Face Mill // 110.mm Dia // M1021157 // IPS #427 - Part # M1021157. Manufacturer: Valenite. Pilot Dia. 60.32mm Length. This item is from our inventory and is used.
- INGERSOLL 45 Degree Face Mill // 100.mm Dia // 5N2V04R01 // IPS #456 - Part # 5N2V04R01. Keyway Width 16.3mm. Tech Condition This item is from our inventory and is used.
- INGERSOLL Heavy Duty Slotter // 146.mm Dia // 36J6B0512R17 // IPS #455 - Part # 36J6B0512R17. Ingersoll HSK100A 764C032-17. 153.5mm Length. Keyway Width 10.2mm.
- INGERSOLL Face Mill // 101.6mm Dia // 6K1B04R12 // IPS #454 - Part # 6K1B04R12. 101.6mm Dia. 70.5mm Length. This item is from our inventory and is used.
- INGERSOLL Face Mill // 100.mm Dia // 6K6V-04R01 // IPS #453 - 60.3mm Length. Keyway Width 16.3mm. Part # 6K6V-04R01. This item is from our inventory and is used.
- INGERSOLL Face Mill // 203.2mm Dia // 6D2G08R02 // IPS #452 - Part # 6D2G08R02. 203.2mm Dia. This item is from our inventory and is used.
- INGERSOLL Face Mill // 101.5mm Dia // 2H1H04R01 // IPS #451 - Part # 2H1H04R01. 101.5mm Dia. 50.8mm Length. This item is from our inventory and is used.
- INGERSOLL Face Mill // 80.mm Dia // 6K2B03R15 // IPS #450 - Part # 6K2B03R15. 44.5mm Length. Keyway Width 10. This item is from our inventory and is used.
- Sandvik HSK63 side lock 18mm end mill tool holder 392.41020-63 18 0808
- Guhring HSK63 12mm end mill tool holder GM300 HSK-C 63 code 12.063 #60654832-1
- INGERSOLL Face Mill // 203.2mm Dia // GD2G08R02 // IPS #419 - Part # GD2G08R02. 203.2mm Dia. 60.5mm Length. Pilot Dia. This item is from our inventory and is used.
- INGERSOLL Face Mill // 203.2mm Dia // 6K2A08R01 // IPS #418 - Part # 6K2A08R01. 203.2mm Dia. 60.325mm Length. Pilot Dia. This item is from our inventory and is used.
- StarCut Finish Mill // 105.mm Dia // 72R990258R0002 // IPS #425 - Part # 72R990258R0002. Manufacturer: StarCut. Pilot Dia. 51.75mm Length. Keyway Width 17.6mm. This item is from our inventory and is used.
- INGERSOLL Face Mill // 101.6mm Dia // 6U2V03R02 // IPS #407 - Part # 6U2V03R02. 101.6mm Dia. 60.5mm Length. Pilot Dia. This item is from our inventory and is used.
- INGERSOLL Face Mill // 152.4mm Dia // 6X4B06R01 // IPS #405 - Part # 6X4B06R01. 152.4mm Dia. 60.325mm Length. Pilot Dia. This item is from our inventory and is used.
- INGERSOLL Face Mill // 101.6mm Dia // 6X3V03R02 // IPS #408 - Part # 6X3V03R02. 101.6mm Dia. 60.325mm Length. Pilot Dia. This item is from our inventory and is used.
- INGERSOLL Face Mill // 76.2mm Dia // 2J6B03R01 // IPS #406 - Part # 2J6B03R01. 76.2mm Dia. 44.45mm Length. Pilot Dia. This item is from our inventory and is used.
- INGERSOLL Face Mill // 76.2mm Dia // 6X1V-03R01 // IPS #417 - 76.2mm Dia. 50.8mm Length. Pilot Dia. Part # 6X1V-03R01. This item is from our inventory and is used.
- INGERSOLL Face Mill // 80.mm Dia // 17J1J31H8R04 // IPS #424 - Part # 17J1J31H8R04. Pilot Dia. 44.45mm Length. Keyway Width 9.9mm. This item is from our inventory and is used.
- INGERSOLL Face Mill // 76.2mm Dia // 5L2V03R01 59268-E // IPS #422 - Part # 5L2V03R01 59268-E. 76.2mm Dia. 60.5mm Length. Pilot Dia. This item is from our inventory and is used.
- Schunk HSK 80A Tool Holder // 6mm ID // 20018344 // IPS #43 - Part # 20018344. Manufacturer: Schunk. 6mm Shank ID 135mm Length.
- T&D Micro Bore // Precision Adjustable Boring Tool // IPS #509 - Manufacturer: T&D Micro Bore with Ingersoll Cutting Tool Holder. 250mm Tool Gauge Length. Ingersoll Cutting Tool - HSK 100A Form A Tool Holder. This item is from our inventory and is used.
- Kaiser // Precision Adjustable Boring Tool // 100mm - 150mm // IPS #505 - Manufacturer: Kaiser. Precision Adjustable Boring Tool. Tool Body Extension. HSK 100A Form A Tool Holder. 310mm Tool Gauge Length. This item is from our inventory and is used.
- Valenite // Adjustable Boring Tool // IPS #504 - Manufacturer: Valenite. Adjustable Boring Tool 16mm (2 Inserts). HSK 100A Form A Tool Holder. 110mm Tool Gauge Length.
- Ingersoll Cutting Tool // Boring Tool // IPS #500 - Manufacturer: Ingersoll Cutting Tool. HSK 80A Form F Tool Holder. 105mm Tool Gauge Length.
- Multi Bore // Precision Adjustable Boring Tool // IPS #508 - Precision Adjustable Boring Tool. Manufacturer: Multi Bore. 180mm Tool Gauge Length. Tool Body Extension. HSK 100A Form A Tool Holder. Part # 119 004.
- Multi Bore // Precision Adjustable Boring Tool // IPS #507 - Precision Adjustable Boring Tool. Manufacturer: Multi Bore. 220mm Tool Gauge Length. Tool Body Extensions (2). HSK 100A Form A Tool Holder. Part # 119 004.
- Multi Bore // Adjustable Boring Tool // IPS #503 - Manufacturer: Multi Bore. 220mm Tool Gauge Length. Tool Body Extension. HSK 100A Form A Tool Holder. This item is from our inventory and is used.
- Walter // Adjustable Boring Tool // IPS #502 - Manufacturer: Walter. Tool Body Extension. HSK 100A Form A Tool Holder. 300mm Tool Gauge Length. This item is from our inventory and is used.
- Walter // Adjustable Boring Tool // IPS #501 - Manufacturer: Walter. HSK 100A Form A Tool Holder. 200mm Tool Gauge Length. Part # B3220GN8.
- ROMAI HSK 100A Adjustable Arbor Mill Adapter // 002128 - 2.2 // IPS #654 - Part # 002128 - 2.2. Manufacturer: Romai.
- ROMAI HSK 100A Adjustable Arbor Mill Adapter // 002128 - 2.2 // IPS #653 - Part # 002128 - 2.2. Manufacturer: Romai.
- Mapal HSK 100A Probe Adapter // MN 5095-10-K // IPS #320 - Manufacturer: Mapal. Part # MN 5095-10-K. 80mm ID 14 0mm OD 75mm Length.
- Command HSK 100A End Mill Holder // 38.5mm ID // H6E3A1500 // IPS #319 - Part # H6E3A1500. Manufacturer: Command. 38.5mm Shank ID 120mm Length. Shank Form A. This item is from our inventory and is used.
- Multi Bore HSK 100A Modular Tool Holder // 245 017 // IPS #317 - Part # 245 017. Bilz WFLC_220 - 12mm Tap Adapter Included. Manufacturer: Multi Bore.
- Multi Bore HSK 100A Modular Tool Holder // 245 015 // IPS #316 - Part # 245 015. Manufacturer: Multi Bore. Multi Bore - Extension 219 083 Included.
- Multi Bore HSK 100A Modular Tool Holder // 245 015 // IPS #315 - Part # 245 015. Multi Bore - Side Bolt Chuck 209 016 ( 12mm Shank ID) Included. 12mm Tap Included. Manufacturer: Multi Bore. Multi Bore - Extension 119 005 Included.
- Multi Bore HSK 100A Modular Tool Holder // 245 015 // IPS #314 - Part # 245 015. Multi Bore - Collet Chuck 228 007 ( 15mm Shank ID) Included. Manufacturer: Multi Bore. Multi Bore - Extension 119 005 Included.
- Multi Bore HSK 100A Modular Tool Holder // 245 015 // IPS #313 - Part # 245 015. Multi Bore - Collet Chuck 228 007 ( 15mm Shank ID) Included. Manufacturer: Multi Bore.
- Ingersoll Cutting Tool HSK 100A Face Mill Adapter // 764C033-09 // IPS #311 - Manufacturer: Ingersoll Cutting Tool. 180mm Length 25.4mm Pilot Dia. 9.5mm Drive Key. Shank Form A. Part # 764C033-09. This item is from our inventory and is used.
- Ingersoll Cutting Tool HSK 100A Tool Holder // 10mm ID // HL-0164 // IPS #300 - Manufacturer: Ingersoll Cutting Tool. 10mm Shank ID 90mm Length.
- Ingersoll Cutting Tool HSK 100A Tool Holder // 12mm ID // HL-0165 // IPS #301 - Manufacturer: Ingersoll Cutting Tool. 12mm Shank ID 95mm Length.
- Ingersoll Cutting Tool HSK 100A Tool Holder // 12mm ID // HL-0165 // IPS #305 - Manufacturer: Ingersoll Cutting Tool. 12mm Shank ID 95mm Length. 6mm Drill Included.
- Kennametal HSK 100A Face Mill Adapter // HSK100A SM100225 // IPS #309 - Part # HSK100A SM100225. 60mm Length 25.4mm Pilot Dia. 9.5mm Drive Key. Shank Form A. This item is from our inventory and is used.
- Ingersoll Cutting Tool HSK 100A Tool Holder // 20mm ID // HL-0169 // IPS #308 - Manufacturer: Ingersoll Cutting Tool. 20mm Shank ID 100mm Length. 31.5mm Drill Included.
- Seco HSK 100A Face Mill Adapter // E9306 5525 2250 // IPS #310 - Part # E9306 5525 2250. Manufacturer: Seco. 50mm Length 22mm Pilot Dia. 10mm Drive Key. Shank Form A. This item is from our inventory and is used.
- Hertel HSK 100A Tool Holder // 25mm ID // 2837100250 // IPS #312 - Part # 2837100250. 25mm Shank ID 115mm Length.
- ROMAI HSK 100A Angle Head // ER32 Collet // 002128 // IPS #650 - Part # 002128. Manufacturer: Romai. ER32 Collet Adapter. Shank Form A. This item is from our inventory and is new (open box).
- Guhring HSK-80 Tool Holder Taper Wiper 4914/60.000 - Guhring HSK-80 PE. Tool Holder Taper Wiper. For security purposes, all of our parts are sealed and or marked so that they can be identified.
- T.M. Smith Tool Sealing Plug // 52-01-NTA-BG // IPS #291 - Manufacturer: T.M. Smith Tool. 40.7mm Length.
- T.M. Smith Tool Sealing Plug // 51-01-NTA-BG // IPS #290 - Manufacturer: T.M. Smith Tool. 25.7mm Length.
- Guhring HSK 50C Tool Holder // 18mm ID // GM300 4367-18.050 // IPS #259 - Part # GM300 4367-18.050. Manufacturer: Guhring. 18mm Shank ID 80mm Length.
- Guhring HSK 50C Tool Holder // 18mm ID // GM300 4367-18.050 // IPS #258 - Part # GM300 4367-18.050. Manufacturer: Guhring. 18mm Shank ID 80mm Length.
- Guhring HSK 50C Tool Holder // 20mm ID // GM300 4367-20.050 C // IPS #257 - Part # GM300 4367-20.050 C. Manufacturer: Guhring. 20mm Shank ID 80mm Length.
- Guhring HSK 50C Tool Holder // 20mm ID // GM300 4367-20.050 A // IPS #254 - Part # GM300 4367-20.050 A. Manufacturer: Guhring. 20mm Shank ID 80mm Length.
- Guhring HSK 63C Tool Holder // 14mm ID // GM300 4367-14.063 A // IPS #250 - Part # GM300 4367-14.063 A. Manufacturer: Guhring. 14mm Shank ID 75mm Length.
- Guhring HSK 63C Tool Holder // 12mm ID // GM300 4367-12.063 // IPS #256 - Part # GM300 4367-12.063. Manufacturer: Guhring. 12mm Shank ID 75mm Length.
- Guhring HSK 63C Tool Holder // 12mm ID // GM300 4367-12.063 // IPS #255 - Part # GM300 4367-12.063. Manufacturer: Guhring. 12mm Shank ID 75mm Length.
- Guhring HSK 63C Tool Holder // 14mm ID // GM300 4367-14.063 B // IPS #251 - Part # GM300 4367-14.063 B. Manufacturer: Guhring. 14mm Shank ID 75mm Length.
- Guhring HSK 63C Tool Holder // 20mm ID // GM300 4367-20.063 B // IPS #252 - Part # GM300 4367-20.063 B. Manufacturer: Guhring. 20mm Shank ID 80mm Length.
- Guhring HSK 63C Tool Holder // 20mm ID // GM300 4367-20.063 A // IPS #253 - Part # GM300 4367-20.063 A. Manufacturer: Guhring. 20mm Shank ID 80mm Length.
- Bilz HSK 63A Collet Chuck // 8mm ID // SC1 HSK A63 ESX20IC // IPS #71 - Part # SC1 HSK A63 ESX20IC. Manufacturer: Bilz. ERC20 Collet Adapter. 8mm Shank ID 90mm Length.
- HSK 63A Collet Chuck // 23.4mm ID // IPS #69 - 23.4mm Shank ID 110mm Length.
- Ingersoll HSK 63A Tool Holder // 10mm ID // HSK63 HL 0104 9KX48 // IPS #65 - Part # HSK63 HL 0104 9KX48. Manufacturer: Ingersoll Cutting Tool. 10mm Drill Included. 10mm Shank ID 80mm Length.
- Ingersoll HSK 63A Tool Holder // 10mm ID // HSK63 HLA0104 45798 // IPS #64 - Part # HSK63 HLA0104 45798. Manufacturer: Ingersoll Cutting Tool. 10mm Shank ID 80mm Length.
- Hertel HSK 63A End Mill Holder // 12mm ID // HSK63AEM12080M // IPS #63 - Part # HSK63AEM12080M. 12mm Shank ID 80mm Length. Shank Form A. Tech Condition.
- Bilz HSK 63A Collet Chuck // 10mm ID // SC1 HSK A63 ESX20IC // IPS #62 - Part # SC1 HSK A63 ESX20IC. Manufacturer: Bilz. ERC20 Collet Adapter. 10mm Shank ID 90mm Length.
- Bilz HSK 63A Shrinker Tool Holder // 12mm ID // HSK63 T1200 // IPS #212 - Part # HSK63 T1200. Manufacturer: Bilz. 12mm Shank ID 90mm Length. 9.4mm Drill Included.
- Walter HSK 63A Tool Holder // 12mm ID // AK180.7.063.090.12 // IPS #8 - Part # AK180.7.063.090.12. 12mm Shank ID 90mm Length. Manufacturer: Walter.
- Lyndex HSK 63A Collet Chuck // 12.7mm ID // HSK 63A-KLD-1/2-135 // IPS #14 - Manufacturer: Lyndex. Part # HSK 63A-KLD-1/2-135. 12.7mm Shank ID 135mm Length.
- Kennametal HSK 63A Face Mill Adapter // HSK63ASM150225 // IPS #52 - Part # HSK63ASM150225. 57.15mm Length 38.1mm Pilot Dia. 16mm Drive Key. Shank Form A. This item is from our inventory and is used.
- Guhring HSK 63A End Mill Holder // 12mm ID // GM300-4329-12.063 // IPS #47 - Manufacturer: Guhring. 12mm Shank ID 80mm Length. Shank Form A. Part # GM300-4329-12.063. Tech Condition.
- Ingersoll Cutting Tool HSK 80A Tool Holder // 20mm ID // 78820-40-404 // IPS #23 - Manufacturer: Ingersoll Cutting Tool. 20mm Shank ID 92mm Length.
- Guhring HSK 80A Tool Holder // 20mm ID // T20007883 // IPS #24 - Part # T20007883. Manufacturer: Guhring. 20mm Shank ID 110mm Length.
- Schunk HSK 80A Tool Holder // 6mm ID // 20018345 // IPS #42 - Part # 20018345. Manufacturer: Schunk. 6mm Shank ID 70mm Length.
- Schunk HSK 80A Tool Holder // 8mm ID // 20018346 // IPS #41 - Part # 20018346. Manufacturer: Schunk. 8mm Shank ID 70mm Length.
- Hertel HSK 63A Tool Holder // 16mm ID // 2837063160 // IPS #40 - Part # 2837063160. 16mm Shank ID 95mm Length.
- Kennametal HSK 80A End Mill Holder // 12.7mm ID // 346312R00 // IPS #32 - Part # 346312R00. 12.7mm Shank ID 78mm Length. Shank Form F. Tech Condition.
- Ingersoll Cutting Tool HSK 80A End Mill Holder // HSK80BEM125425 // IPS #31 - Part # HSK80BEM125425 22974. Manufacturer: Ingersoll Cutting Tool. Shank Form F. Tech Condition This item is from our inventory and is used.
- Command HSK 80A Face Mill Adapter // 764B031R02.45122 // IPS #30 - Part # 764B031R02.45122. Manufacturer: Command. 70mm Length 38.1mm Pilot Dia. 16mm Drive Key. Shank Form F. This item is from our inventory and is used.
- Kennametal HSK 80A Face Mill Adapter // HSK80BSM150225 // IPS #29 - Part # HSK80BSM150225. 58mm Length 38.1mm Pilot Dia. 16mm Drive Key. Shank Form F. This item is from our inventory and is used.
- Ingersoll Cutting Tool HSK 80A Face Mill Adapter // 764B031L01 // IPS #28 - Part # 764B031L01. Manufacturer: Ingersoll Cutting Tool. 60mm Length 38.1mm Pilot Dia. 16mm Drive Key. Shank Form F. This item is from our inventory and is used.
- Schunk HSK 80A Tool Holder // 8mm ID // T20013155 // IPS #27 - Part # T20013155. Manufacturer: Schunk. 8mm Shank ID 72mm Length.
- Schunk HSK 80A Tool Holder // 16mm ID // 78820-40-407-0 // IPS #25 - Manufacturer: Schunk. 16mm Shank ID 93mm Length.
- Schunk HSK 80A Tool Holder // 12mm ID // 78820-40-411-0 // IPS #26 - Manufacturer: Schunk. 12mm Shank ID 87mm Length.
- Guhring HSK 50A End Mill Holder // 12mm ID // HSK50 4329/12.050 XKTB // IPS #56 - Part # HSK50 4329/12.050 XKTB. Manufacturer: Guhring. 12mm Shank ID 80mm Length. Shank Form A. Tech Condition.
- Hertel HSK 63A Tool Holder // 6mm ID // 2837063060 // IPS #57 - Part # 2837063060. 6mm Shank ID 80mm Length.
- Kennametal HSK 63A End Mill Holder // 19mm ID // HSK63AEM075375 // IPS #54 - Part # HSK63AEM075375. 19mm Shank ID 95mm Length. Shank Form A. Tech Condition.
- Kennametal HSK 63A End Mill Holder // 32mm ID // HSK63AEM125425 // IPS #59 - Part # HSK63AEM125425. 32mm Shank ID 108mm Length. Shank Form A. Tech Condition.
- Guhring HSK 63A Collet Chuck // 24mm ID // GM300 4304 32.063-12 // IPS #58 - Part # GM300 4304 32.063-12. Manufacturer: Guhring. ER32 Collet Adapter. 24mm Shank ID 100mm Length.
- HSK 80A Collet Chuck // 10mm ID // 746H032-05 45033 // IPS #55 - Part # 746H032-05 45033. ER32 Collet Adapter. 10mm Shank ID 113mm Length.
- Diabold HSK 63A End Mill Holder // 20mm ID // HSK63-AX-20 // IPS #46 - Manufacturer: Diabold. 20mm Shank ID 80mm Length. Shank Form A. Part # HSK63-AX-20. Tech Condition.
- ATI QM0607 Robotic Tool Changer Module USED
- ATI K19T Robotic Tool Module USED
- Kennametal HSK 80A Collet Chuck // 12.7mm ID // HSK80BTG050090 // IPS #33 - Part # HSK80BTG050090. LNA050 Collet Adapter. 12.7mm Shank ID 86mm Length.
- New never used Komet DAH Compensating Holder/Adaptor, intl Coolant, ABS connect - DAH compensating holder used to eliminate axial and radial run-out. DAH 81 ABS 50.
- New - C5-391.Hm-25 083 - Sandvik Capto Adaptor - NEW - C5-391. Give us a call to check inventory for used tool availability, or if you'd like us to fabricate or manufacture a custom tool for you.
- Komet A3148751 Modular Tool Holding System Adapter, ABS50 Modular System Size - Modular System Size: ABS50. Includes Adapter. Collar Height: 2.0080".
- New Komet A2010320 ABS50 To ABS25 REDUCER, Modular Tool System Adapter - · Modular System Size: ABS25/ABS50. You are getting everything shown in the pictures. If it is not in the pictures it is not included.
- VALENITE V40-ISO-VT32-040 CAT40 MODULAR TOOL HOLDER CAT 40 Machine Tool - CAT40 MODULAR TOOL HOLDER. Tool holders (CAT50, CAT40, BT50, BT45, BT40, HSK, VDI, Morse Taper) . CAT 40 Machine Tool. Price is for 1 Holder there is 3 Available. Bore Gage setting Rings ( 10mm - over 300mm 1/4" - 13").
- VALENITE V40-ISO-VT32-040 CAT40 MODULAR TOOL HOLDER CAT 40 Machine Tool - CAT40 MODULAR TOOL HOLDER. Tool holders (CAT50, CAT40, BT50, BT45, BT40, HSK, VDI, Morse Taper) . CAT 40 Machine Tool. Price is for 1 Holder there is 3 Available. Bore Gage setting Rings ( 10mm - over 300mm 1/4" - 13").
- Valenite V50M-Ft40-276 3/A/6 Cat 50 Modular Tool Holder
- Valenite V50-150-Vt32-040 Cat 50 Modular Tool Holder