6-Pack 3.3Ft/1 Meter 9X18Mm U Shape Aluminum Channels with Diffuser, End Caps an - This aluminum channel can NOT ensure a spotless lighting effect. No aluminum channel can ensure that. Compact flat aluminum channels compatible for Lightstrip Plus 2nd. 6 pcs x 3.3 feet Aluminum Channels with frosted Covers + 12 sets of Accessories.
0.812" x 1.625" x 60 inches, Gold Galvanized Steel, Slotted Strut Channel, 12 ga - Heavy Duty Low Profile Half Slotted Strut Channel (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically-bonded, nonporous surface barrier. This provides protection from moisture and air and to provide an excellent surface for painting if desired. The gold finish also provides a low electrical resistance when the system needs to be grounded.Material is 12 gauge (0.105 inch) thickness.
0.812" x 1.625" x 48 inches (3 Pack), Gold Galvanized Steel, Slotted Strut Chann - Half Slotted Strut Channel (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically-bonded, nonporous surface barrier. This provides protection from moisture and air and to provide an excellent surface for painting if desired. The gold finish also provides a low electrical resistance when the system needs to be grounded.Material is 14 gauge (0.075 inch) thickness.
0.812" x 1.625" x 24 inches, Gold Galvanized Steel, Slotted Strut Channel, 14 ga - Half Slotted Strut Channel (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically-bonded, nonporous surface barrier. This provides protection from moisture and air and to provide an excellent surface for painting if desired. The gold finish also provides a low electrical resistance when the system needs to be grounded.Material is 14 gauge (0.075 inch) thickness.
0.812" x 1.625" x 36 inches (3 Pack), Gold Galvanized Steel, Slotted Strut Chann - Half Slotted Strut Channel (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically-bonded, nonporous surface barrier. This provides protection from moisture and air and to provide an excellent surface for painting if desired. The gold finish also provides a low electrical resistance when the system needs to be grounded.Material is 14 gauge (0.075 inch) thickness.
0.812" x 1.625" x 36 inches, Gold Galvanized Steel, Slotted Strut Channel, 12 ga - Heavy Duty Low Profile Half Slotted Strut Channel (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically-bonded, nonporous surface barrier. This provides protection from moisture and air and to provide an excellent surface for painting if desired. The gold finish also provides a low electrical resistance when the system needs to be grounded.Material is 12 gauge (0.105 inch) thickness.
0.812" x 1.625" x 36 inches, Gold Galvanized Steel, Slotted Strut Channel, 14 ga - Half Slotted Strut Channel (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically-bonded, nonporous surface barrier. This provides protection from moisture and air and to provide an excellent surface for painting if desired. The gold finish also provides a low electrical resistance when the system needs to be grounded.Material is 14 gauge (0.075 inch) thickness.
0.812" x 1.625" x 48 inches, Gold Galvanized Steel, Slotted Strut Channel, 14 ga - Half Slotted Strut Channel (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically-bonded, nonporous surface barrier. This provides protection from moisture and air and to provide an excellent surface for painting if desired. The gold finish also provides a low electrical resistance when the system needs to be grounded.Material is 14 gauge (0.075 inch) thickness.
0.812" x 1.625" x 12 inches (3 Pack), Gold Galvanized Steel, Slotted Strut Chann - Half Slotted Strut Channel (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically-bonded, nonporous surface barrier. This provides protection from moisture and air and to provide an excellent surface for painting if desired. The gold finish also provides a low electrical resistance when the system needs to be grounded.Material is 14 gauge (0.075 inch) thickness.
0.812" x 1.625" x 24 inches (3 Pack), Gold Galvanized Steel, Slotted Strut Chann - Half Slotted Strut Channel (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically-bonded, nonporous surface barrier. This provides protection from moisture and air and to provide an excellent surface for painting if desired. The gold finish also provides a low electrical resistance when the system needs to be grounded.Material is 14 gauge (0.075 inch) thickness.
0.812" x 1.625" x 12 inches, Gold Galvanized Steel, Slotted Strut Channel, 12 ga - Heavy Duty Low Profile Half Slotted Strut Channel (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically-bonded, nonporous surface barrier. This provides protection from moisture and air and to provide an excellent surface for painting if desired. The gold finish also provides a low electrical resistance when the system needs to be grounded.Material is 12 gauge (0.105 inch) thickness.
0.812" x 1.625" x 12 inches (3 Pack), Gold Galvanized Steel, Slotted Strut Chann - Heavy Duty Low Profile Half Slotted Strut Channel (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically-bonded, nonporous surface barrier. This provides protection from moisture and air and to provide an excellent surface for painting if desired. The gold finish also provides a low electrical resistance when the system needs to be grounded.Material is 12 gauge (0.105 inch) thickness.
0.812" x 1.625" x 60 inches (3 Pack), Gold Galvanized Steel, Slotted Strut Chann - Half Slotted Strut Channel (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically-bonded, nonporous surface barrier. This provides protection from moisture and air and to provide an excellent surface for painting if desired. The gold finish also provides a low electrical resistance when the system needs to be grounded.Material is 14 gauge (0.075 inch) thickness.
0.812" x 1.625" x 36 inches (3 Pack), Gold Galvanized Steel, Slotted Strut Chann - Heavy Duty Low Profile Half Slotted Strut Channel (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically-bonded, nonporous surface barrier. This provides protection from moisture and air and to provide an excellent surface for painting if desired. The gold finish also provides a low electrical resistance when the system needs to be grounded.Material is 12 gauge (0.105 inch) thickness.
0.812" x 1.625" x 60 inches, Gold Galvanized Steel, Slotted Strut Channel, 14 ga - Half Slotted Strut Channel (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically-bonded, nonporous surface barrier. This provides protection from moisture and air and to provide an excellent surface for painting if desired. The gold finish also provides a low electrical resistance when the system needs to be grounded.Material is 14 gauge (0.075 inch) thickness.
0.812" x 1.625" x 12 inches, Gold Galvanized Steel, Slotted Strut Channel, 14 ga - Half Slotted Strut Channel (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically-bonded, nonporous surface barrier. This provides protection from moisture and air and to provide an excellent surface for painting if desired. The gold finish also provides a low electrical resistance when the system needs to be grounded.Material is 14 gauge (0.075 inch) thickness.
0.812" x 1.625" x 60 inches (3 Pack), Gold Galvanized Steel, Slotted Strut Chann - Heavy Duty Low Profile Half Slotted Strut Channel (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically-bonded, nonporous surface barrier. This provides protection from moisture and air and to provide an excellent surface for painting if desired. The gold finish also provides a low electrical resistance when the system needs to be grounded.Material is 12 gauge (0.105 inch) thickness.
100mm or 4" OD Stainless disc, point 089 thick - Here is a Stainless Steel disc. It's 4" or app 101mm OD and point 089 thick. There is a small thru hole in center, app point 135 OD, big enough for a 6-32 screw to fit thru. Weighs just over 5 ounces.
1.625" x 1.625" x 12 inches, 12 gauge, (3 Pack), Gold Galvanized Steel Strut Cha - Slotted Gold Galvanized Steel Strut Channel. (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically bonded, nonporous surface barrier. This provides protection from moisture and air to extend the life of the zinc and to provide an excellent surface for painting if desired. The Gold finish also provides a low electrical resistance when the system needs to be grounded.
1.625" x 1.625" x 60 inches, 12 gauge, Gold Galvanized Steel Strut Channel, Slot - Slotted Gold Galvanized Steel Strut Channel. (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically bonded, nonporous surface barrier. This provides protection from moisture and air to extend the life of the zinc and to provide an excellent surface for painting if desired. The Gold finish also provides a low electrical resistance when the system needs to be grounded.
1.625" x 1.625" x 36 inches, 12 gauge, Gold Galvanized Steel Strut Channel, Slot - Slotted Gold Galvanized Steel Strut Channel. (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically bonded, nonporous surface barrier. This provides protection from moisture and air to extend the life of the zinc and to provide an excellent surface for painting if desired. The Gold finish also provides a low electrical resistance when the system needs to be grounded.
1.625" x 1.625" x 36 inches, 12 gauge, (3 Pack), Gold Galvanized Steel Strut Cha - Slotted Gold Galvanized Steel Strut Channel. (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically bonded, nonporous surface barrier. This provides protection from moisture and air to extend the life of the zinc and to provide an excellent surface for painting if desired. The Gold finish also provides a low electrical resistance when the system needs to be grounded.
1.625" x 1.625" x 24 inches, 12 gauge, (3 Pack), Gold Galvanized Steel Strut Cha - Slotted Gold Galvanized Steel Strut Channel. (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically bonded, nonporous surface barrier. This provides protection from moisture and air to extend the life of the zinc and to provide an excellent surface for painting if desired. The Gold finish also provides a low electrical resistance when the system needs to be grounded.
1.625" x 1.625" x 12 inches, 12 gauge, Gold Galvanized Steel Strut Channel, Slot - Slotted Gold Galvanized Steel Strut Channel. (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically bonded, nonporous surface barrier. This provides protection from moisture and air to extend the life of the zinc and to provide an excellent surface for painting if desired. The Gold finish also provides a low electrical resistance when the system needs to be grounded.
1.625" x 1.625" x 60 inches, 12 gauge, (3 Pack), Gold Galvanized Steel Strut Cha - Slotted Gold Galvanized Steel Strut Channel. (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically bonded, nonporous surface barrier. This provides protection from moisture and air to extend the life of the zinc and to provide an excellent surface for painting if desired. The Gold finish also provides a low electrical resistance when the system needs to be grounded.
1.625" x 1.625" x 48 inches, 12 gauge, (3 Pack), Gold Galvanized Steel Strut Cha - Slotted Gold Galvanized Steel Strut Channel. (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically bonded, nonporous surface barrier. This provides protection from moisture and air to extend the life of the zinc and to provide an excellent surface for painting if desired. The Gold finish also provides a low electrical resistance when the system needs to be grounded.
1.625" x 1.625" x 24 inches, 12 gauge, Gold Galvanized Steel Strut Channel, Slot - Slotted Gold Galvanized Steel Strut Channel. (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically bonded, nonporous surface barrier. This provides protection from moisture and air to extend the life of the zinc and to provide an excellent surface for painting if desired. The Gold finish also provides a low electrical resistance when the system needs to be grounded.
1.625" x 1.625" x 48 inches, 12 gauge, Gold Galvanized Steel Strut Channel, Slot - Slotted Gold Galvanized Steel Strut Channel. (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness. The gold colored zinc dichromate is applied over the electro-galvanized surface to produce a chemically bonded, nonporous surface barrier. This provides protection from moisture and air to extend the life of the zinc and to provide an excellent surface for painting if desired. The Gold finish also provides a low electrical resistance when the system needs to be grounded.
6" x 2.5" x 48 inches, 6061-T6 AA Aluminum Channel - 6061 Aluminum Association (AA) Channel has straight flanges instead of tapered and flanges (legs)are thicker than the web (base). It combines workability, weldability, and corrosion resistance.
2 x 1 x 1/8 x 40" STEEL CHANNEL IRON Bundle Of 4 Pieces [STR CHN] - Here Are Approx Sizes Of Channel;. In house Blanchard Grinding to 60" and Surface grinding to 120". All available as standard or oversize. All sizes of 1018 cold finished bar. Also available in a full range of other sizes and lengths.
1-1/2 x 1/2 x 1/8 x 40" STEEL CHANNEL IRON Bundle Of 4 Pieces [STR CHN] - Here Are Approx Sizes Of Channel;. In house Blanchard Grinding to 60" and Surface grinding to 120". All available as standard or oversize. All sizes of 1018 cold finished bar. Also available in a full range of other sizes and lengths.
1-1/4 x 1/2 x 1/8 x 40" STEEL CHANNEL IRON Bundle Of 4 Pieces [STR CHN] - Here Are Approx Sizes Of Channel;. In house Blanchard Grinding to 60" and Surface grinding to 120". All available as standard or oversize. All sizes of 1018 cold finished bar. Also available in a full range of other sizes and lengths.
0.812" x 1.625" x 24 inches (3 Pack), Galvanized Steel, Slotted Strut Channel, 1 - Package includes Quantity of 3Low Profile Half slotted (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 14 gauge (0.075 inch) thickness.
0.812" x 1.625" x 48 inches (3 Pack), Galvanized Steel, Slotted Strut Channel, 1 - Package includes Quantity of 3Low Profile Half slotted (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 14 gauge (0.075 inch) thickness.
Aluminum Custom Channel W/Lid 24" - YOU ARE BUYING A CUSTOM CHANNEL WITH SLIDE ON, OR SNAP ON LID. 6063 T5 ALLOY. 24" of both top and bottom extrusions.
Aluminum Channel LShaped Aluminum Channel 3103-0009-0080 Aluminum Stable - Made of high quality aluminum material, safe and firm, stable structure and durable for use. Item Type: Aluminum Channel. Material: Aluminum. If you do not receive our reply within 48 hours, pls. If you are satisfied with our service, pls.
3" x 1" x 0.125" Aluminum Channel 6063-T52 Extruded Architectural : 12.0" - See Aluminum Tolerances Aluminum Architectural Channel 6063-T52 has excellent corrosion resistance, good formability, and light weight. 6063 is more easily formable and much more corrosion resistant than 6061, but it is only about half as strong.
0.812" x 1.625" x 36 inches (3 Pack), Galvanized Steel, Slotted Strut Channel, 1 - Package includes Quantity of 3Low Profile Half slotted (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 14 gauge (0.075 inch) thickness.
0.812" x 1.625" x 36 inches, Galvanized Steel, Slotted Strut Channel, 14 ga. - Package includes Quantity of 1Low Profile Half slotted (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 14 gauge (0.075 inch) thickness.
0.812" x 1.625" x 48 inches, Galvanized Steel, Slotted Strut Channel, 14 ga. - Package includes Quantity of 1Low Profile Half slotted (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 14 gauge (0.075 inch) thickness.
0.812" x 1.625" x 60 inches, Galvanized Steel, Slotted Strut Channel, 14 ga. - Package includes Quantity of 1Low Profile Half slotted (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 14 gauge (0.075 inch) thickness.
0.812" x 1.625" x 12 inches, Galvanized Steel, Slotted Strut Channel, 14 ga. - Package includes Quantity of 1Low Profile Half slotted (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 14 gauge (0.075 inch) thickness.
0.812" x 1.625" x 24 inches, Galvanized Steel, Slotted Strut Channel, 14 ga. - Package includes Quantity of 1Low Profile Half slotted (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 14 gauge (0.075 inch) thickness.
1.625" x 1.625" x 24 inches, 12 gauge, (3 Pack), Galvanized Steel Strut Channel, - Package includes Quantity of 3Half slotted (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness.
1.625" x 1.625" x 48 inches, 12 gauge, (3 Pack), Galvanized Steel Strut Channel, - Package includes Quantity of 3Half slotted (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness.
1.625" x 1.625" x 36 inches, 12 gauge, (3 Pack), Galvanized Steel Strut Channel, - Package includes Quantity of 3Half slotted (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness.
1.625" x 1.625" x 12 inches, 12 gauge, (3 Pack), Galvanized Steel Strut Channel, - Package includes Quantity of 3Half slotted (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness.
1.625" x 1.625" x 60 inches, 12 gauge, (3 Pack), Galvanized Steel Strut Channel, - Package includes Quantity of 3Half slotted (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness.
1.75" x 1" x 0.125" Aluminum Channel 6063-T52 Extruded Architectural : 72.0" - See Aluminum Tolerances Aluminum Architectural Channel 6063-T52 has excellent corrosion resistance, good formability, and light weight. 6063 is more easily formable and much more corrosion resistant than 6061, but it is only about half as strong.
1.75" x 1" x 0.125" Aluminum Channel 6063-T52 Extruded Architectural : 12.0" - See Aluminum Tolerances Aluminum Architectural Channel 6063-T52 has excellent corrosion resistance, good formability, and light weight. 6063 is more easily formable and much more corrosion resistant than 6061, but it is only about half as strong.
3" x 1.6" x .356" Wall 6061 T6 ALUMINUM CHANNEL 40" long Mill Stock - You are buying 1 piece of 3" x 1.6" x. 356" 6061 T6 Aluminum Channel bar 40 " long +.07"/-0. Weight per foot: 2.1 Lbs. This is extruded bar not sanded or polished and may have scratches from handling.
150mm or 5-15/16" Aluminum disc, .252 thick, machined, used - Here is an Aluminum disc. On the bottom of disc, there are 3 screws attached. Think the top disc was supposed to be removable. But it's not. Maybe the end user glued top disc to bottom disc. There is a small hole in bottom of disc, which was for a dowel pin.
2" x 1" x 0.13" x 0.13" Aluminum Channel 6061-T6-Extruded Aluminum Association - See Aluminum Tolerances Aluminum Channel Aluminum Association 6061-T6 exhibits high strength, low weight, above average corrosion resistance, ease of machining, and has excellent weldability. 6061 is the most commonly used aluminum alloy in the world due to its positive characteristics.
0.75" x 0.75" x 0.125" Aluminum Channel 6063-T52 Extruded Architectural : 48.0" - See Aluminum Tolerances Aluminum Architectural Channel 6063-T52 has excellent corrosion resistance, good formability, and light weight. 6063 is more easily formable and much more corrosion resistant than 6061, but it is only about half as strong.
2" x 1" x 0.13" x 0.13" Aluminum Channel 6061-T6-Extruded Aluminum Association - See Aluminum Tolerances Aluminum Channel Aluminum Association 6061-T6 exhibits high strength, low weight, above average corrosion resistance, ease of machining, and has excellent weldability. 6061 is the most commonly used aluminum alloy in the world due to its positive characteristics.
4" STEEL CHANNEL Bracing welding shop stock 10" Long - 4" STEEL CHANNEL average item pictured. welding shop stock fab 5.4 lbs per foot 10” to 10 1/8” long. If you are looking for an item that we do not have listed we can get it. Take a look at our great feedback from all of our satisfied customers.
0.75" x 0.75" x 0.125" Aluminum Channel 6063-T52 Extruded Architectural : 72.0" - See Aluminum Tolerances Aluminum Architectural Channel 6063-T52 has excellent corrosion resistance, good formability, and light weight. 6063 is more easily formable and much more corrosion resistant than 6061, but it is only about half as strong.
1.5" x 0.75" x 0.125" Aluminum Channel 6063-T52 Extruded Architectural : 48.0" - See Aluminum Tolerances Aluminum Architectural Channel 6063-T52 has excellent corrosion resistance, good formability, and light weight. 6063 is more easily formable and much more corrosion resistant than 6061, but it is only about half as strong.
2" x 1" x 0.13" x 0.13" Aluminum Channel 6061-T6-Extruded Aluminum Association - See Aluminum Tolerances Aluminum Channel Aluminum Association 6061-T6 exhibits high strength, low weight, above average corrosion resistance, ease of machining, and has excellent weldability. 6061 is the most commonly used aluminum alloy in the world due to its positive characteristics.
1.625" x 1.625" x 36 inches, 12 gauge, Galvanized Steel Strut Channel, Slotted - Package includes Quantity of 1Half slotted (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness.
1.625" x 1.625" x 12 inches, 12 gauge, Galvanized Steel Strut Channel, Slotted - Package includes Quantity of 1Half slotted (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness.
1.625" x 1.625" x 48 inches, 12 gauge, Galvanized Steel Strut Channel, Slotted - Package includes Quantity of 1Half slotted (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness.
1.625" x 1.625" x 24 inches, 12 gauge, Galvanized Steel Strut Channel, Slotted - Package includes Quantity of 1Half slotted (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness.
1.625" x 1.625", 12 inches, 12 gauge, Galvanized Steel, Strut Channel, Long Slot - Long slotted (Holes are 3 inches long, 0.400 inches wide and 4 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness. Galvanized Steel, Long Slotted Unistrut; Size: 1-5/8" x 1-5/8"; Hole Size: 0.400 inch width x 3 inches long; Thickness: 12 ga. (0.105 inch); Length: 12 inches; N/A;
1.625" x 1.625", 60 inches, 12 gauge, Galvanized Steel, Strut Channel, Long Slot - Long slotted (Holes are 3 inches long, 0.400 inches wide and 4 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness. Galvanized Steel, Long Slotted Unistrut; Size: 1-5/8" x 1-5/8"; Hole Size: 0.400 inch width x 3 inches long; Thickness: 12 ga. (0.105 inch); Length: 60 inches; N/A;
1.625" x 1.625", 36 inches, 12 gauge, Galvanized Steel, Strut Channel, Long Slot - Long slotted (Holes are 3 inches long, 0.400 inches wide and 4 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness. Galvanized Steel, Long Slotted Unistrut; Size: 1-5/8" x 1-5/8"; Hole Size: 0.400 inch width x 3 inches long; Thickness: 12 ga. (0.105 inch); Length: 36 inches; N/A;
1.625" x 1.625" x 60 inches, 12 gauge, Galvanized Steel Strut Channel, Slotted - Package includes Quantity of 1Half slotted (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications in outdoor or indoor applications. Material is 12 gauge (.105 inch) thickness.
9" x 2.65" x 18", 6061-T6 AS Aluminum Channel - 6061 American Standard Aluminum Channel is similar in cross section to rolled steel channels, with traditional tapered flanges and rounded ends. It provides higher strength and is commonly used in structural applications as the name suggest.
0.625" x 0.625" x 0.125" x 72" (3 Pack), 6063-T52 Aluminum Channel - 6063-T52 Architectural Aluminum Channel has defined square corners on both inside and outside of channel. Produced in smaller sizes and generally used for light structural and cosmetic applications.
0.500" x 0.375" x 0.125" x 48", 6063-T52 Aluminum Channel - 6063-T52 Architectural Aluminum Channel has defined square corners on both inside and outside of channel. Produced in smaller sizes and generally used for light structural and cosmetic applications.
0.750" x 0.750" x 0.125" x 72", 6063-T52 Aluminum Channel - 6063-T52 Architectural Aluminum Channel has defined square corners on both inside and outside of channel. Produced in smaller sizes and generally used for light structural and cosmetic applications.
0.750" x 0.750" x 0.125" x 48", 6063-T52 Aluminum Channel - 6063-T52 Architectural Aluminum Channel has defined square corners on both inside and outside of channel. Produced in smaller sizes and generally used for light structural and cosmetic applications.
0.500" x 0.375" x 0.125" x 72", 6063-T52 Aluminum Channel - 6063-T52 Architectural Aluminum Channel has defined square corners on both inside and outside of channel. Produced in smaller sizes and generally used for light structural and cosmetic applications.
0.750" x 0.375" x 0.125" x 48", 6063-T52 Aluminum Channel - 6063-T52 Architectural Aluminum Channel has defined square corners on both inside and outside of channel. Produced in smaller sizes and generally used for light structural and cosmetic applications.
0.625" x 0.625" x 0.125" x 72", 6063-T52 Aluminum Channel - 6063-T52 Architectural Aluminum Channel has defined square corners on both inside and outside of channel. Produced in smaller sizes and generally used for light structural and cosmetic applications.
0.500" x 0.375" x 0.125" x 60", 6063-T52 Aluminum Channel - 6063-T52 Architectural Aluminum Channel has defined square corners on both inside and outside of channel. Produced in smaller sizes and generally used for light structural and cosmetic applications.
0.625" x 0.625" x 0.125" x 36", 6063-T52 Aluminum Channel - 6063-T52 Architectural Aluminum Channel has defined square corners on both inside and outside of channel. Produced in smaller sizes and generally used for light structural and cosmetic applications.
0.500" x 0.375" x 0.125" x 36", 6063-T52 Aluminum Channel - 6063-T52 Architectural Aluminum Channel has defined square corners on both inside and outside of channel. Produced in smaller sizes and generally used for light structural and cosmetic applications.
0.500" x 0.375" x 0.125" x 18", 6063-T52 Aluminum Channel - 6063-T52 Architectural Aluminum Channel has defined square corners on both inside and outside of channel. Produced in smaller sizes and generally used for light structural and cosmetic applications.
0.500" x 0.375" x 0.125" x 24", 6063-T52 Aluminum Channel - 6063-T52 Architectural Aluminum Channel has defined square corners on both inside and outside of channel. Produced in smaller sizes and generally used for light structural and cosmetic applications.
Black anodized Aluminum heat sink 8-1/2" x 4-1/4" x point 550" thick used - Here is custom made black anodized Aluminum heat sink. The body is app point 181" thick. There are 20 fins and they are app 3/8" tall. There is a 10-32 thread thru hole near each corner. There are 3 countersunk thru holes along each edge which were used for 6-32 flat head screws.
Aluminum 6" F-Channel 12" In Length (2 Pieces) - YOU ARE BUYING A 2 PIECES OF ALUMINUM F-CHANNEL 12" IN LENGTH. BOTTOM ANGLE IN APPROXIMATLY 1 1/4" TOP ANGLE IS A APPROXIMATEY 1/2" IN LENGTH.125" THICK.
1.5" x 0.75" x 0.125" Aluminum Channel 6063-T52 Extruded Architectural : 12.0" - See Aluminum Tolerances Aluminum Architectural Channel 6063-T52 has excellent corrosion resistance, good formability, and light weight. 6063 is more easily formable and much more corrosion resistant than 6061, but it is only about half as strong.
1.5" x 0.75" x 0.125" Aluminum Channel 6063-T52 Extruded Architectural : 72.0" - See Aluminum Tolerances Aluminum Architectural Channel 6063-T52 has excellent corrosion resistance, good formability, and light weight. 6063 is more easily formable and much more corrosion resistant than 6061, but it is only about half as strong.
1.75" x 1" x 0.125" Aluminum Channel 6063-T52 Extruded Architectural : 48.0" - See Aluminum Tolerances Aluminum Architectural Channel 6063-T52 has excellent corrosion resistance, good formability, and light weight. 6063 is more easily formable and much more corrosion resistant than 6061, but it is only about half as strong.
0.75" x 0.75" x 0.125" Aluminum Channel 6063-T52 Extruded Architectural : 12.0" - See Aluminum Tolerances Aluminum Architectural Channel 6063-T52 has excellent corrosion resistance, good formability, and light weight. 6063 is more easily formable and much more corrosion resistant than 6061, but it is only about half as strong.
2" x 1" Channel Bar - 1/8" gauge - Mild Steel - 96" inch Long (8-ft) - Mild Steel. 2" x 1" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
2" x 1" Channel Bar - 1/8" gauge - Mild Steel - 84" inch Long (7-ft) - Mild Steel. 2" x 1" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
2" x 1" Channel Bar - 1/8" gauge - Mild Steel - 72" inch Long (6-ft) - Mild Steel. 2" x 1" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/2" x 3/4" Channel Bar - 1/8" gauge - Mild Steel - 96" inch Long (8-ft) - Mild Steel. 1-1/2" x 3/4" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/2" x 3/4" Channel Bar - 1/8" gauge - Mild Steel - 84" inch Long (7-ft) - Mild Steel. 1-1/2" x 3/4" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/2" x 3/4" Channel Bar - 1/8" gauge - Mild Steel - 72" inch Long (6-ft) - Mild Steel. 1-1/2" x 3/4" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/2" x 1/2" Channel Bar - 11 gauge - Mild Steel - 96" inch Long (8-ft) - Mild Steel. 1-1/2" x 1/2" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/2" x 1/2" Channel Bar - 11 gauge - Mild Steel - 84" inch Long (7-ft) - Mild Steel. 1-1/2" x 1/2" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/2" x 1/2" Channel Bar - 11 gauge - Mild Steel - 72" inch Long (6-ft) - Mild Steel. 1-1/2" x 1/2" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1" x 1/2" Channel Bar - 1/8" gauge - Mild Steel - 96" inch Long (8-ft) - Mild Steel. 1" x 1/2" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1" x 1/2" Channel Bar - 1/8" gauge - Mild Steel - 84" inch Long (7-ft) - Mild Steel. 1" x 1/2" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1" x 1/2" Channel Bar - 1/8" gauge - Mild Steel - 72" inch Long (6-ft) - Mild Steel. 1" x 1/2" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
3" x 1.6" x .356" Wall 6061 T6 ALUMINUM CHANNEL 72" long Mill Stock - You are buying 1 piece of 3" x 1.6" x. 356" 6061 T6 Aluminum Channel bar 72 " long +.07"/-0. Weight per foot: 2.1 Lbs. This is extruded bar not sanded or polished and may have scratches from handling.
3" x 1.6" x .356" Wall 6061 T6 ALUMINUM CHANNEL 48" long Mill Stock - You are buying 1 piece of 3" x 1.6" x. 356" 6061 T6 Aluminum Channel bar 48 " long +.07"/-0. Weight per foot: 2.1 Lbs. This is extruded bar not sanded or polished and may have scratches from handling.
3" x 1.6" x .356" Wall 6061 T6 ALUMINUM CHANNEL 46" long Mill Stock - You are buying 1 piece of 3" x 1.6" x. 356" 6061 T6 Aluminum Channel bar 46 " long +.07"/-0. Weight per foot: 2.1 Lbs. This is extruded bar not sanded or polished and may have scratches from handling.
3" x 1.6" x .356" Wall 6061 T6 ALUMINUM CHANNEL 24" long Mill Stock - You are buying 1 piece of 3" x 1.6" x. 356" 6061 T6 Aluminum Channel bar 24 " long +.07"/-0. Weight per foot: 2.1 Lbs. This is extruded bar not sanded or polished and may have scratches from handling.
3" x 1.6" x .356" Wall 6061 T6 ALUMINUM CHANNEL 36" long Mill Stock - You are buying 1 piece of 3" x 1.6" x. 356" 6061 T6 Aluminum Channel bar 36 " long +.07"/-0. Weight per foot: 2.1 Lbs. This is extruded bar not sanded or polished and may have scratches from handling.
2" x 1" Channel Metal Bar - 3/16" gauge - Mild Steel - 11" inch Long - Mild Steel. 2" x 1" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. Looking for a specific size and length?.
2" x 1" Channel Bar - 11 gauge - Mild Steel - 11" inch Long - Mild Steel. 2" x 1" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/2" x 3/4" Channel Bar - 1/8" gauge - Mild Steel - 11" inch Long - Mild Steel. 1-1/2" x 3/4" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/2" x 1/2" Channel Bar - 11 gauge - Mild Steel - 11" inch Long - Mild Steel. 1-1/2" x 1/2" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/4" x 1/2" Channel Bar - 1/8" gauge - Mild Steel - 11" inch Long - Mild Steel. 1/2" x 1-1/4" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1" x 1/2" Channel Bar - 11 gauge - Mild Steel - 11" inch Long - Mild Steel. 1" x 1/2" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1.625" x 3.25", 24 inches, 12 ga., 304 Stainless Steel Back to Back Slotted S... - Back to Back Half Slotted Stainless Steel Strut. (Holes are 5/8 inch x 1-1/8 inch on 2 inches center to center.) Back to Back Strut is two standard struts that have been welded back to back for a variety of non-standard applications. Strut channels for framing and mounting applications in outdoor or highly corrosive enviroments, non-rusting. 304 Stainless Steel Half Slotted Back to Back Strut Channel Height: 3-1/4" Width: 1-5/8" Thickness: 12 ga. Length: 24 inches Hole Size is 5/8 inch x 1-1/8 inch on 2 inch centers.
1-5/8" x 13/16" Strut Channel - Galvanized - 14 gauge - 24" long (Lot of 5 pcs) - 1-5/8" x 13/16" Strut Channel - Galvanized Steel. Overhead conduit and pipe installations. (Lot of 5 pcs). COMMON USES ________________________________________. Data provided for reference only. 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size.
6061 Aluminum Channel 4" x .150" x 2" x 12"-Long 6061 T6 - Its most commonly used applications are for milling and turning ,drilling, and tapping Also known for its ease of welding Mig or Tig. Buy only what you Need. No Minimum Orders.
2" x 1" x 1/8" Wall 6063 T52 ALUMINUM CHANNEL 60" long Mill Stock - You are buying 1 piece of 2" x 1" x. 125" 6063 T52 Aluminum Channel bar 60 " long +.07"/-0. Weight per foot.552 Lbs. This is extruded bar not sanded or polished and may have scratches from handling.
2" x 1" x 1/8" Wall 6063 T52 ALUMINUM CHANNEL 46" long Mill Stock - You are buying 1 piece of 2" x 1" x. 125" 6063 T52 Aluminum Channel bar 46 " long +.07"/-0. Weight per foot.552 Lbs. This is extruded bar not sanded or polished and may have scratches from handling.
2" x 1" x 1/8" Wall 6063 T52 ALUMINUM CHANNEL 48" long Mill Stock - You are buying 1 piece of 2" x 1" x. 125" 6063 T52 Aluminum Channel bar 48 " long +.07"/-0. Weight per foot.552 Lbs. This is extruded bar not sanded or polished and may have scratches from handling.
2" x 1" x 1/8" Wall 6063 T52 ALUMINUM CHANNEL 72" long Mill Stock - You are buying 1 piece of 2" x 1" x. 125" 6063 T52 Aluminum Channel bar 72 " long +.07"/-0. Weight per foot.552 Lbs. This is extruded bar not sanded or polished and may have scratches from handling.
3/8" Threaded Rod - Everbilt - Zinc Coated - 3-1/2" inch long (Pack of 12 pcs.) - 3/8" Threaded Rod - Zinc Coated. Fully Threaded. Zinc Coated (Rust Resistant). Cable tray mounting. long-lasting durable steel construction. Data provided for reference only. or you can order just what you need custom Cutto Sizein any quantity.
3/8" Threaded Rod - Everbilt - Zinc Coated - 5-1/2" inch long (Pack of 21 pcs.) - 3/8" Threaded Rod - Zinc Coated. Fully Threaded. Zinc Coated (Rust Resistant). Cable tray mounting. long-lasting durable steel construction. Data provided for reference only. or you can order just what you need custom Cutto Sizein any quantity.
3/8" Threaded Rod - Everbilt - Zinc Coated - 10" inch long (Pack of 21 pcs.) - 3/8" Threaded Rod - Zinc Coated. Fully Threaded. Zinc Coated (Rust Resistant). Cable tray mounting. long-lasting durable steel construction. Data provided for reference only. or you can order just what you need custom Cutto Sizein any quantity.
125mm or 4-15/16" Aluminum disc, .252 thick, used - Here is an Aluminum disc. There is a dowel pin extending from bottom of disc. Think it was pressed into bottom. Can be milled off if needed. Weighs app 13 ounces. This is used.
Stainless Steel disc or cover, 7-5/8" OD x 1-1/8" tall, machined, used - Here is a Stainless Steel disc or housing or cover. It's app 7-5/8" OD x 1-1/8" thick or tall. There are 2 small cutouts near outer edges and a small thru hole along bottom edge. There is a small lip or ledge around bottom.
3/8" Threaded Rod - Everbilt - Zinc Coated - 5-1/2" inch long - 3/8" Threaded Rod - Zinc Coated. Fully Threaded. Zinc Coated (Rust Resistant). Cable tray mounting. long-lasting durable steel construction. 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, and 7-ft or Cutto Size.
3/8" Threaded Rod - Everbilt - Zinc Coated - 3-1/2" inch long - 3/8" Threaded Rod - Zinc Coated. Fully Threaded. Zinc Coated (Rust Resistant). Cable tray mounting. long-lasting durable steel construction. 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, and 7-ft or Cutto Size.
3/8" Threaded Rod - Everbilt - Zinc Coated - 10" inch long - 3/8" Threaded Rod - Zinc Coated. Fully Threaded. Zinc Coated (Rust Resistant). Cable tray mounting. long-lasting durable steel construction. 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, and 7-ft or Cutto Size.
Aluminum C-Channel 4" x 1-3/4" x 5/16" Thickness - This is for only (one) piece of Aluminum C-Channel - 4" wide x 1-3/4" tall x5/16" Thickness. I have five pieces of these channel four are 20' 7-5/8" (247- 5/8") Long and one is 14-7-3/8" (175-3/8") Long.
1" X 1” X 1/8" X 14" Long Aluminum Channel 6063-T52 Aluminum Channel - Material Type: 6063 Aluminum. 6063aluminum is a lightweight, general-purpose aluminum alloy that can easily be machined or welded. It has a high resistance to corrosion, and an excellent weight-to-strength ratio.
1-1/2" x 3/4" Channel Bar - 1/8" gauge - Mild Steel - 11" inch Long - Mild Steel. 1-1/2" x 3/4" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
Albion Alloy Brass U Channel 2.5 x 2.5 X 2.5MM X 305MM by Chronos Ref UC3 - Wir beliefern seit 30 Jahren den Versandhandel mit technischen Werkzeugen , ein Familienunternehmen , das mit einer kleinen umgebauten Garage in St. Albans begann und im Laufe der Jahre stetig gewachsen ist und jetzt von unserem neuen 10.000 Quadratfuß großen Lager in Dunstable aus operiert . Der Versandhandel ist nach wie vor unsere Spezialität und versendet mehrere hundert Bestellungen pro Tag an unsere zufriedenen Kunden auf der ganzen Welt. Obwohl der größte Teil unseres Geschäfts über unsere 8 Tooling-Websites und Ebay abgewickelt wird, heißen wir auch persönliche Anrufer willkommen, um unsere Tausende von Produkten in unserem Showroom zu durchstöbern / Lager in Dunstable – Wir haben von Montag bis Freitag von 8:00 bis 16:00 Uhr und samstags von 9:00 bis 12:00 Uhr geöffnet. Aber ein.
Albion Alloy Brass C Channel 1 x 2.5 X 1MM X 305MM by Chronos Ref CC2 - Wir beliefern seit 30 Jahren den Versandhandel mit technischen Werkzeugen , ein Familienunternehmen , das mit einer kleinen umgebauten Garage in St. Albans begann und im Laufe der Jahre stetig gewachsen ist und jetzt von unserem neuen 10.000 Quadratfuß großen Lager in Dunstable aus operiert . Der Versandhandel ist nach wie vor unsere Spezialität und versendet mehrere hundert Bestellungen pro Tag an unsere zufriedenen Kunden auf der ganzen Welt. Obwohl der größte Teil unseres Geschäfts über unsere 8 Tooling-Websites und Ebay abgewickelt wird, heißen wir auch persönliche Anrufer willkommen, um unsere Tausende von Produkten in unserem Showroom zu durchstöbern / Lager in Dunstable – Wir haben von Montag bis Freitag von 8:00 bis 16:00 Uhr und samstags von 9:00 bis 12:00 Uhr geöffnet. Aber ein.
Albion Alloy Brass U Channel 1.5 x 1.5 X 1.5MM X 305MM by Chronos Ref UC2 - Wir beliefern seit 30 Jahren den Versandhandel mit technischen Werkzeugen , ein Familienunternehmen , das mit einer kleinen umgebauten Garage in St. Albans begann und im Laufe der Jahre stetig gewachsen ist und jetzt von unserem neuen 10.000 Quadratfuß großen Lager in Dunstable aus operiert . Der Versandhandel ist nach wie vor unsere Spezialität und versendet mehrere hundert Bestellungen pro Tag an unsere zufriedenen Kunden auf der ganzen Welt. Obwohl der größte Teil unseres Geschäfts über unsere 8 Tooling-Websites und Ebay abgewickelt wird, heißen wir auch persönliche Anrufer willkommen, um unsere Tausende von Produkten in unserem Showroom zu durchstöbern / Lager in Dunstable – Wir haben von Montag bis Freitag von 8:00 bis 16:00 Uhr und samstags von 9:00 bis 12:00 Uhr geöffnet. Aber ein.
Albion Alloy Brass C Channel 1 x 3 x 1mm x 305mm by Chronos Ref CC3 - Wir beliefern seit 30 Jahren den Versandhandel mit technischen Werkzeugen , ein Familienunternehmen , das mit einer kleinen umgebauten Garage in St. Albans begann und im Laufe der Jahre stetig gewachsen ist und jetzt von unserem neuen 10.000 Quadratfuß großen Lager in Dunstable aus operiert . Der Versandhandel ist nach wie vor unsere Spezialität und versendet mehrere hundert Bestellungen pro Tag an unsere zufriedenen Kunden auf der ganzen Welt. Obwohl der größte Teil unseres Geschäfts über unsere 8 Tooling-Websites und Ebay abgewickelt wird, heißen wir auch persönliche Anrufer willkommen, um unsere Tausende von Produkten in unserem Showroom zu durchstöbern / Lager in Dunstable – Wir haben von Montag bis Freitag von 8:00 bis 16:00 Uhr und samstags von 9:00 bis 12:00 Uhr geöffnet. Aber ein.
Albion Alloy Brass C Channel 1 x 1.5 X 1MM X 305MM by Chronos Ref CC1 - Wir beliefern seit 30 Jahren den Versandhandel mit technischen Werkzeugen , ein Familienunternehmen , das mit einer kleinen umgebauten Garage in St. Albans begann und im Laufe der Jahre stetig gewachsen ist und jetzt von unserem neuen 10.000 Quadratfuß großen Lager in Dunstable aus operiert . Der Versandhandel ist nach wie vor unsere Spezialität und versendet mehrere hundert Bestellungen pro Tag an unsere zufriedenen Kunden auf der ganzen Welt. Obwohl der größte Teil unseres Geschäfts über unsere 8 Tooling-Websites und Ebay abgewickelt wird, heißen wir auch persönliche Anrufer willkommen, um unsere Tausende von Produkten in unserem Showroom zu durchstöbern / Lager in Dunstable – Wir haben von Montag bis Freitag von 8:00 bis 16:00 Uhr und samstags von 9:00 bis 12:00 Uhr geöffnet. Aber ein.
Albion Alloy Brass U Channel 1 X 1MM X 305MM by Chronos Ref UC1 - Wir beliefern seit 30 Jahren den Versandhandel mit technischen Werkzeugen , ein Familienunternehmen , das mit einer kleinen umgebauten Garage in St. Albans begann und im Laufe der Jahre stetig gewachsen ist und jetzt von unserem neuen 10.000 Quadratfuß großen Lager in Dunstable aus operiert . Der Versandhandel ist nach wie vor unsere Spezialität und versendet mehrere hundert Bestellungen pro Tag an unsere zufriedenen Kunden auf der ganzen Welt. Obwohl der größte Teil unseres Geschäfts über unsere 8 Tooling-Websites und Ebay abgewickelt wird, heißen wir auch persönliche Anrufer willkommen, um unsere Tausende von Produkten in unserem Showroom zu durchstöbern / Lager in Dunstable – Wir haben von Montag bis Freitag von 8:00 bis 16:00 Uhr und samstags von 9:00 bis 12:00 Uhr geöffnet. Aber ein.
1.625" x 3.25", 12 inches, 12 ga., 304 Stainless Steel Back to Back Solid Str... - Solid Back to Back Strut is two standard struts with no holes that have been welded back to back for a variety of non-standard applications. Strut channels for framing and mounting applications in outdoor or highly corrosive enviroments, non-rusting. 304 Stainless Steel Half Solid Back to Back Strut Channel Height: 3-1/4" Width: 1-5/8" Thickness: 12 ga. Length: 12 inches Solid Strut (No Holes)
1.625" x 3.25", 48 inches, 12 ga., Galvanized Steel, Back to Back Solid 90 De... - Back to back solid channel with one channel at right angle with no holes with hot dipped galvanized finish is made of 12 gauge steel for added durability and strength. Galvanized Steel, Right Angle Back to Back Channel Size: 1-5/8" x 3-1/4" Solid (No Holes) Thickness: 12 ga. (0.105 inch) Length: 48 inches N/A
1.625" x 3.25", 48 inches, 12 ga., 304 Stainless Steel Back to Back Slotted S... - Back to Back Half Slotted Stainless Steel Strut. (Holes are 5/8 inch x 1-1/8 inch on 2 inches center to center.) Back to Back Strut is two standard struts that have been welded back to back for a variety of non-standard applications. Strut channels for framing and mounting applications in outdoor or highly corrosive enviroments, non-rusting. 304 Stainless Steel Half Slotted Back to Back Strut Channel Height: 3-1/4" Width: 1-5/8" Thickness: 12 ga. Length: 48 inches Hole Size is 5/8 inch x 1-1/8 inch on 2 inch centers.
1.625" x 3.25", 36 inches, 12 ga., 304 Stainless Steel Back to Back Slotted S... - Back to Back Half Slotted Stainless Steel Strut. (Holes are 5/8 inch x 1-1/8 inch on 2 inches center to center.) Back to Back Strut is two standard struts that have been welded back to back for a variety of non-standard applications. Strut channels for framing and mounting applications in outdoor or highly corrosive enviroments, non-rusting. 304 Stainless Steel Half Slotted Back to Back Strut Channel Height: 3-1/4" Width: 1-5/8" Thickness: 12 ga. Length: 36 inches Hole Size is 5/8 inch x 1-1/8 inch on 2 inch centers.
1.625" x 3.25", 12 inches, 12 ga., 304 Stainless Steel Back to Back Slotted S... - Back to Back Half Slotted Stainless Steel Strut. (Holes are 5/8 inch x 1-1/8 inch on 2 inches center to center.) Back to Back Strut is two standard struts that have been welded back to back for a variety of non-standard applications. Strut channels for framing and mounting applications in outdoor or highly corrosive enviroments, non-rusting. 304 Stainless Steel Half Slotted Back to Back Strut Channel Height: 3-1/4" Width: 1-5/8" Thickness: 12 ga. Length: 12 inches Hole Size is 5/8 inch x 1-1/8 inch on 2 inch centers.
0.812" x 1.625", 24 inches, 12 ga., Galvanized Steel, Half Slotted Strut Channel - Half Slotted Strut Channel (Holes are 1-1/8 inches long, 9/16 inches wide and 2 inches center to center.) strut channels for framing and mounting applications. Material is 12 gauge (0.105 inch) thickness. Galvanized Steel, Slotted Unistrut Size: 13/16" x 1-5/8" Hole Size: 9/16 inch width x 1-1/8 inches long Thickness: 12 ga. (0.105 inch) Length: 24 inches N/A
Aluminum Divider H Channel 48" Long Mill Finish - Sheet Divider Up To 1/8" Thick - Great as small gutter, trim or paired with aluminum sheet. Many applications! Aluminum H Channel Extrusion 48" Mill Finish Sheet Divider. Mill finish- aluminum bare finish that's as extruded and may or may not have minor scratches or dye lines.
Aluminum Rectangle Shaped Tubing with Channel Type Sides - Since the center portion looks like rectangle shaped tubing. These holes only go through one side of the aluminum rectangle shaped tubing. The center of these holes are 1" from the ends of the aluminum rectangle shaped tubing.
2" x 1" Channel Metal Bar - 3/16" gauge - Mild Steel - 36" inch Long (3-ft) - Mild Steel. 2" x 1" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
2" x 1" Channel Metal Bar - 3/16" gauge - Mild Steel - 24" inch Long (2-ft) - Mild Steel. 2" x 1" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
2" x 1" Channel Bar - 1/8" gauge - Mild Steel - 60" inch Long (5-ft) - Mild Steel. 2" x 1" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
2" x 1" Channel Bar - 1/8" gauge - Mild Steel - 48" inch Long (4-ft) - Mild Steel. 2" x 1" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
2" x 1" Channel Metal Bar - 11 gauge - Mild Steel - 36" inch Long (3-ft) - Mild Steel. 2" x 1" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
2" x 1" Channel Bar - 1/8" gauge - Mild Steel - 24" inch Long (2-ft) - Mild Steel. 2" x 1" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
2" x 1" Channel Bar - 11 gauge - Mild Steel - 12" inch Long (1-ft) - Mild Steel. 2" x 1" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/2" x 3/4" Channel Bar - 1/8" gauge - Mild Steel - 60" inch Long (5-ft) - Mild Steel. 1-1/2" x 3/4" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/2" x 3/4" Channel Bar - 1/8" gauge - Mild Steel - 48" inch Long (4-ft) - Mild Steel. 1-1/2" x 3/4" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/2" x 3/4" Channel Bar - 1/8" gauge - Mild Steel - 36" inch Long (3-ft) - Mild Steel. 1-1/2" x 3/4" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/2" x 3/4" Channel Bar - 1/8" gauge - Mild Steel - 24" inch Long (2-ft) - Mild Steel. 1-1/2" x 3/4" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/2" x 3/4" Channel Bar - 11 gauge - Mild Steel - 12" inch Long (1-ft) - Mild Steel. 1-1/2" x 3/4" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/2" x 1/2" Channel Bar - 11 gauge - Mild Steel - 60" inch Long (5-ft) - Mild Steel. 1-1/2" x 1/2" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/2" x 1/2" Channel Metal Bar - 11 gauge - Mild Steel - 48" inch Long (4-ft) - Mild Steel. 1-1/2" x 1/2" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/2" x 1/2" Channel Metal Bar - 11 gauge - Mild Steel - 36" inch Long (3-ft) - Mild Steel. 1-1/2" x 1/2" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/2" x 1/2" Channel Bar - 1/8" gauge - Mild Steel - 24" inch Long (2-ft) - Mild Steel. 1-1/2" x 1/2" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/2" x 1/2" Channel Bar - 1/8" gauge - Mild Steel - 12" inch Long (1-ft) - Mild Steel. 1-1/2" x 1/2" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/4" x 1/2" Channel Bar - 1/8" gauge - Mild Steel - 24" inch Long (2-ft) - Mild Steel. 1/2" x 1-1/4" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1-1/4" x 1/2" Channel Bar - 1/8" gauge - Mild Steel - 12" inch Long (1-ft) - Mild Steel. 1/2" x 1-1/4" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1" x 1/2" Channel Bar - 1/8" gauge - Mild Steel - 60" inch Long (5-ft) - Mild Steel. 1" x 1/2" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1" x 1/2" Channel Bar - 1/8" gauge - Mild Steel - 48" inch Long (4-ft) - Mild Steel. 1" x 1/2" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1" x 1/2" Channel Bar - 1/8" gauge - Mild Steel - 36" inch Long (3-ft) - Mild Steel. 1" x 1/2" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1" x 1/2" Channel Bar - 1/8" gauge - Mild Steel - 24" inch Long (2-ft) - Mild Steel. 1" x 1/2" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
1" x 1/2" Channel Bar - 11 gauge - Mild Steel - 12" inch Long (1-ft) - Mild Steel. 1" x 1/2" Channel Bar. Lengths may vary +/- 1/8" (Cutting saw blade thickness). 1-ft, 2-ft, 3-ft, 4-ft, 5-ft, 6-ft, 7-ft, 8-ft long or Cutto Size. Elongation in 2" = 20%. or you can order just what you need custom Cutto Sizein any quantity.
B-LINE B822-W White Plastic End Cap for 1-5/8" Square Strut Channel (Lot of 10) - You are purchasingTen (10) - B-LINE B822-W White Plastic End Cap for 1-5/8" Square Strut Channel. X 1 5/8-IN. CHANNEL (B22 & B24). We pride ourselves in being one of the largest new surplus pipe, valve, and fitting distributors in the United States.
4" STEEL CHANNEL Bracing welding shop stock - 4" STEEL CHANNEL average item pictured. welding shop stock fab 5.4 lbs per foot 12” to 12 1/8” long. If you are looking for an item that we do not have listed we can get it. Take a look at our great feedback from all of our satisfied customers.
Aluminum Channel 3" x .170" x 1-3/4" x 48"-Long 6061 T6 - Aluminum Association Channel 3" x. 170" x 1-3/4" x 48"-Long 6061 T6. Its most commonly used applications are for milling and turning ,drilling, and tapping Also known for its ease of welding Mig or Tig.
Stainless Steel C Channel 18 Gauge 0.05"/1.27mm, 30"(L) X 2" X 3" X 2" - It is 430 Stainless SteelNo.4 Brushed finish. You peel it off after everything is safely and properly in place, to reveal a perfect scratch free finish. Base : 3"Legs: 2"Length : 30"Thickness: 18 gauge/ 0.05" or 1.27 mm.
Aluminum Custom Channel 6" In Length 4 Pieces - IF YOU LOOK AT THE PICTURES YOU CAN SEE HOW TWO PIECES FIT TOGETHER TO FORM A RECTANGLE. THEY DO NOT STAY TOGETHER AND WOULD HAVE TO BE WELDED TOGETHER.
1.2" X .33" Aluminum Channel 12" In Length - IN ONE PICTURE YOU WILL SEE A PIECE OF 1" X 2" ALUMINUM TUBE WITH THIS CHANNEL ON TOP OF IT. IT MAKES A GOOD CAP FOR 1" TUBING. (TUBING NOT INCLUDED).
Aluminum Channel 4" x .150" x 2" x 24"-Long 6061 T6 - Aluminum Association Channel 4" x. 150" x 2" x 24"-Long 6061 T6. Its most commonly used applications are for milling and turning ,drilling, and tapping Also known for its ease of welding Mig or Tig. Buy only what you Need.
3" C-CHANNEL .188 thick 3/16" 1 pc 12" Length - 3 INCH STEEL CHANNEL IRON 12" INCHES LONG 4.1 lbs a ft .ships usps priority, Perfect for small projects and welding and industrial applications.
U Channel, ISOFR, 9/16 Leg, 1/8 In Th, 5 Ft(ZJ) - U Channel, ISOFR, 9/16 Leg, 1/8 In Th, 5 Ft. Material Isopthalic Polyester Fire Retardant Resin (ISOFR) Fiberglass. Resin Type ISOFR. Leg Length 9/16". Length 5 Ft. Base Width 2".
(129) Polypro U Channel 3"H X 2"W X 22" Long 2 Pcs - (129) POLYPROPOLENE U CHANNEL 2 PIECES. 3" HIGH X 2" WIDE X 22" LONG IN THIS SALE #129. Sales# 129. The related techniques of blow molding. and injection-stretch blow molding are also used, which involve both extrusion and molding.
4 Pieces 1"x 1/2" ALUMINUM CHANNEL 60" long 6063 T52 Mill Stock 20' - You are buying 4 pieces of 1" x 1/2"x 1/8" 6063 T52 Aluminum Channel bar 60 " long +.07"/-0 a total of 240". per foot.258 Lbs. This is extruded bar not sanded or polished and may have scratches from handling.
Aluminum Channel 4" x .150" x 2" x 48"-Long 6061 T6 - Aluminum Association Channel 4" x. 150" x 2" x 48"-Long 6061 T6. Its most commonly used applications are for milling and turning ,drilling, and tapping Also known for its ease of welding Mig or Tig. Buy only what you Need.
Large plastic handle - Aluminum extrusion 8020 channel profile - 8020 Extrusion. I also have a large quantity of 80/20 extrusion. This item is heavy duty 1530 ( 1.5" x 3") in various lengths. All the material is slightly used, hence it will have light scraches. The ends may or may not have pre-drilled for anchor or fastners.
6061 T6 Aluminum Channel 3" x .130" x 1-1/2" x 24"Long - Aluminum Channel 3" x. 130" x 1-1/2" x 24"-Long 6061 T6. Its most commonly used applications are for milling and turning ,drilling, and tapping Also known for its ease of welding Mig or Tig. Buy only what you Need.