Cincinnati Milacron Injection Molding Drying Hopper - MFG Cincinnati Milacron Injection Molding Drying Hopper Unable to Test Hopper Capacity: 170 Lbs. Door Size: 8.25 In. W x 11 In. H Attached Side Outlet Dia: 2.5 In. Product Outlet: 4 In. Air Inlet: 1.5 In.
Pneu-Con Processing Autoload Vacuum Receiver Hopper - Vacuum Receiver Hopper Unable to Test Material Transfer System: Auto load Line Valve: Conair CV 1 Volts: 24VDC FLA: 0.2 Top Dia: 12.5 In. Inner Dia. Outer Dia. Air Inlet: 2 In. Hopper Straight Wall Height: 11.5 In.
Arburg 630 S 2500-800 Injection Molding Machine, 275ton, 10.2oz, 2006,460V,#9388 - Arburg Used 630 S 2500-800 Injection Molding Machine, 275 US ton, 10.2 oz, Yr. 2006, 460VTie Bar Spacing: 24.8 x 24.8 in Selogica ControllerPlaten size: 900 x 900 mm / 35.4 x 35.4 inOriginal Machine ConfigurationPrimary Injection Unit: 45mm ( A size).Screw and barrel can be upsized by buyer to C size, 55mm. 434 g PS, 15.
C-Lin XMTD-3002 Temperature Controller 220 V control power - 220 Volt temperature controller removed from new machine due to changes needed and the controller installed was not voltage compatible. Like new and used very few times (testing only) before controller was replaced. Controller only, no paperwork but can be found online for instructions and information. 68mm x 68mm panel mounting.
Injection Molding Machine Van Dorn / Demag 125 Ton - Van Dorn / Demag Model 125/18.51-310. Equipped with HKO, Core Pull, Robot Interface. Hydraulic ejector - stroke: 140 mm. Ejector force forward/backward: 58 / 26 kN. Size of mould platens (h x v): 690 mm x 660 mm.
Kawata AutoLoader Controller - See photos for details. We have over 7+ acres of under roof new and used Industrail Surplus Not limited to the following.
🔥NEW Conair TLR Tube Loader, Direct Feed 24V. Open Box, Free Shipping🇺🇸 - Conair TLR Tube Loader, Direct Feed Model is a compact, central vacuum receiver designed to transfer typical plastic pellets and regained, by vacuum, from boxes, bins or hoppers to end-use destinations like molding machines, extrudes or other hoppers or bins.Item is NEW in open box! Free shipping!
Wall Unit Lifter With 11-3/4 In. Pin Spacing - The prongs on the end of this hardscaping / landscaping tool are placed in the wall unit's end holes. The prongs grip the holes and the block weight secures its hold. We do not accept P.O. Boxes. We're happy to help.
Material Vacuum Loader Hopper Feeder For Injection Molding - In good used condition Bottom Hopper Approximate Height 27" Approximate Width 20" Top SS Hopper Approximate Height 20" Approximate Width 16" With filter screen 2" inlet holes Shutoff on the bottom Bottom base 8"x8" Overall Dimensions 24 x 67 In. .
Justin Tanks 6000 Gal. Fiberglass Tank - Justin Tanks LLC, Model FRP, (fiber reinforced plastic) 6489 gallon, atmospheric curing tank. Flat top, with (4) 7" OD, 3-1/2" ID flanged side ports with 1" bolt holes on 4" centers. Location: 5F6943, 5F6944, 5F6956.
AEC Blender BD-900-4 Used #124939 - Related Ideal Reference Numbers: 124939. 900 lbs/hr Max Blending Capacity. Single Phase. FREIGHT POLICY. It does not include manuals or printed materials. Removing or tampering with our security seals will automatically void the warranty.
Torit Chip Dust Collector - Here is a nice running Torit Dust Collector. This item can be inspected in Mpls MN. Make: Donaldson Torit. Note: This collector has been disassembled and is on a pallet in our warehouse. Model: CPC 12.
EWIKON HPS-C-SLOT Temperature Controller - This item is pre-owned. It has not been tested in any way so it is being sold AS IS/FOR PARTS. By purchasing this item you understand that it may or may not work as intended.
PROCESS CONTROL Blender Control EB528BF004 Used #120438 - Related Ideal Reference Numbers: 120438. This piece is located at Ideal Machinery, Inc. on our showroom floor. It does not include manuals or printed materials. Removing or tampering with our security seals will automatically void the warranty.
Display board assembly 968d00601 Piovan Technologies DST01 V02s - I have enclosed plastic display panel, but outer screw connections (where panel connects to machine) are broken and plastic panel has a crack in it. computer board is good. For security purposes, all of our parts are sealed and or marked so that they can be identified.
Wafer Microloader 6401-0569 - This item is to be installed and maintained by qualified individuals. We claim no expertise in the use of this item. We accept no responsibility on the correct/incorrect application or installation of this item.
Digital Temperature Controller 110V -230VAC - Relative humidity: 20% ~ 85% (No condensate). temperature exceeds temperature limit or when sensor error. Switch the modes between cool and heat. Ambient temperature: 0 ° C ~ 60 ° C;. Storage temperature: -30 ° C ~ 75 ° C;.
Dreher 1 HP Plastic Grinder - Dreher 1 HP Plastic Grinder. Model S10/9 GF sn K8746. Condition is Used, but in good condition. 4” x 5” feed throat, 230 volt. Cannot find date of mfg. Palletized and ready to ship.
FOREMOST MACHINE Blender MBWB-BM-400 Used #72094 - Related Ideal Reference Numbers: 72094. This piece is located at Ideal Machinery, Inc. on our showroom floor. It does not include manuals or printed materials. Removing or tampering with our security seals will automatically void the warranty.
Tps Gruenberg Oven C140H11.M - WE HAVE SEVERAL WAREHOUSES. WARRANTY IS NULL VOID IF ANY ITEM IS TAMPERED WITH, OPENED OR DISASSEMBLED. IF THERE ARE ANY PROBLEMS WITH THE ITEM DO NOT TRY TO REPAIR AND INVESTIGATE. Line Current: 68.7A.
5 Ton Universal Air Cooled Chiller '22 - 20 Ton Air Cooled Chiller. Cooled Water Flow. · Stainless Steel Water Tank. · Liquid Line Solenoid Valve. Propeller Condenser fan(s) for induced air flow. Thermal Expansion Valve. Outlet Water Temp. · Removable side panels for easy access.
Process Technology SHC-875-11VVH-0061 Immersion Heater - Heater was pulled from a working environment. Heater has wear from previous use including scuffs and scratches. Includes unit only. Comes as shown in images. Photos of actual item for sale. Unit is on hand and ready to ship. Please feel free to message us any question you may have. Thank you for checking out our listing. .
Berstorff Ze90Aut Set Of Shaft 2851 Mm Long - Used set of Berstorff Model ZE90AUT - Shaft made by Berstorff. Total length of full spline 2851 mm long. These shafts were removed from the extruder after an extruder modification and are in excellent condition.
Gaumer Process 120V Immersion Heater IPA1P1N8W1ER - Cat#: IPA1P1N8W1ER. location unless otherwise noted. Item location: South Houston, Texas, United States. Item(s) are surplus and have not been tested. South Houston, TX 77587. EXPORT COMPLIANCE. CIP - Door to Airport.
Watlow Immersion Heater, Part #: Bhna25E5C-21 - Location unless otherwise noted. Item location: South Houston, Texas, United States. South Houston, TX 77587. PART #: BHNA25E5C-21. Item(s) are surplus and have not been tested. CIP - Door to Airport.
Starview MSP-1218 Skin Packaging Machine - Energy saving Impulse Heating instant-on quartz heater system. Tubular quartz heater system. Easy access to machine for maintenance. Painted steel construction. Double roll support for film. Cycle start button.
DME Used Mold Heat Controller, 5 zones, 240V #8095 - DME Used Mold Heat Controller, 5 zones, 240V Cables: No Control Voltage: 240V In Put Voltage: 240V Number of Zones: 5 Amps per zone: 15 Total amperage: 75 Dimensions: 26"L x 21"W x 45"H Weight: 61 lbs.
siemens OP 398 main CPU molding machine - Complete computer system from an injection molding machine, a Van Dorn 500-ton machine. Includes all the cards the backplane board and the encoder board for the iO. This does not include the operator panel.
AEC Auto Loader Component A806CH/SPL #2063 - Manufacturer: AEC. Item#: 2063. Auto Loader Component. E. UAI- USED AS IS. Finally, it includes classifying each item pursuant to a condition code. INSPECTION AND ACCEPTANCE OF PRODUCT. This item could be several years old and may not be the most recent model, but it has never been placed in service.
MCF-4-18 Concentrate feeder #2936 - Concentrate feeder. Item#: 2936. INSPECTION AND ACCEPTANCE OF PRODUCT. This item could be several years old and may not be the most recent model, but it has never been placed in service. LIMITATION OF LIABILITY.
Motan SB10M151 Loader / Receiver Junction Box - Model: SB10M151. Motan Receiver junction box for material drying and conveying system. complete with 7 pin quick connector plug. Depending on the weight and density of the goods we use cardboard boxes, with bubble wrap and/or closed cell foam for padding.
Conair Material Vacuum Conveyor - Used Conair Material Vacuum Conveyor with 5hp motor, 3500 RPM, 575 Volt. This is used machinery sold "as is". There are no warranties of any kind. Subject to Prior Sale.
Big DESMA Extrusion I-Molding Press 140hp Hydraulic Pak - Made in Germany. The image below is looking in the end (extrusion output?). at the splines on the end of the Rotator. There are also a couple of large nitrogen snubber bladder expansion chambers. The hydraulic rotator part that looks like a giant hydraulic motor is labeled JAHNS HMW200B.