100
Vintage Perber Machinists Micrometer 0 to 1" good used$20.00 Buy It Now
Vintage The L.S. Starett Co. No. 3M Machinists Micrometer$16.00 Buy It Now
Brown & Sharpe No. 607 Depth Micrometer long range with many rods and case
$38.98 0 Bids or Buy It Now 6d 23h
Mitutoyo Digimatic Both Spherical Micrometer BMD-25MX 395-271-30 0-25mm
$224.99 Buy It Now or Best Offer
Standard Measuring Rod 175mm Caliper Micrometer Calibration Block Rod
$12.59 Buy It Now or Best Offer
Standard Measuring Rod 150mm Caliper Micrometer Calibration Block Rod
$11.52 Buy It Now or Best Offer
Standard Measuring Rod 25mm Caliper Micrometer Calibration Block Rod
$7.99 Buy It Now or Best Offer
Standard Measuring Rod 50mm Caliper Micrometer Calibration Block Rod
$8.08 Buy It Now or Best Offer
Standard Measuring Rod 75mm Caliper Micrometer Calibration Block Rod
$8.88 Buy It Now or Best Offer
Standard Measuring Rod 100mm Caliper Micrometer Calibration Block Rod
$9.97 Buy It Now or Best Offer
Vintage 1985 Mitutoyo OD Mic No. 102-124 0-1" Outside Micrometer
$35.00 Buy It Now or Best Offer
STARRETT No.220 Anvil Micrometer 0-1” 001" - Used
$44.98 0 Bids 6d 23h
Vintage Insize 0-1'' 0.001'' Outside Micrometer Japan
$9.99 0 Bids 6d 22h
Used MITUTOYO 101-113 OUTSIDE MICROMETER: 0-1″
$25.00 Buy It Now or Best Offer
Mitutoyo 103-217 Outside Micrometer 2-3", Range .0001" Vernier
$40.00 Buy It Now or Best Offer
Vintage Tubular Micrometer Co. No. 901 1 inch Micrometer
$15.95 Buy It Now
1 watcherMitutoyo digital micrometer Head 0-2" 164-162 Used And Tested.
$50.00 0 Bids or Best Offer 6d 22h
Vintage Brown & Sharpe No. 13 1" Micrometer
$24.95 Buy It Now
Vintage Machinist Tools Swedish Gage Micrometer 0-1" Eskilstuna Sweden NICE!
$0.99 0 Bids 6d 22h
Vintage The L.S. Starrett Co. No 230 1" Micrometer
$19.95 Buy It Now
ViaGasaFamido Outside Micrometer 50‑75mm Spiral Measuring Measuring Calipers ...
$44.22 Buy It Now
Scherr Tumico Standing Micrometer model 85-12
$35.00 0 Bids 6d 21h
Two - Mitutoyo 164-135 And 164-136 Micrometer Head. (0-50 mm, 0.001mm)
$250.00 Buy It Now or Best Offer
3 watchersStarrett 440Z-3RL Micrometer Depth Gage, 0-3" Tools Excellent Condition LOOK AT
$40.00 0 Bids or Buy It Now 4d 21h
Starrett 440 Micrometer Depth Gauge Vernier Ratchet Lock Nut Set Lot Case
$140.00 Buy It Now or Best Offer
Mitutoyo 112-189 Micrometer for 3 Flutes Cutting Head 1-15mm, 0.01mm
$64.95 Buy It Now or Best Offer
Starrett No. 436-1 Inch
$12.00 0 Bids 6d 20h
Brown & Sharpe BM-4 Bench Point Micrometer - USA - SUPER RARE!!
$129.99 Buy It Now
Brown & Sharpe Machinist Micrometer 1-2 Special Application - RARE
$29.99 Buy It Now
Starrett No. 436-1 Micrometer Machinist Tool USA 0.0001 resolution w/ Case
$14.99 0 Bids or Best Offer 6d 20h
Vintage Starrett # 445 Micrometer Depth Gage In Wooden Case
$24.99 0 Bids 4d 19h
Accusize 1-2" Thread Micrometer S916-C751 .001"
$125.00 Buy It Now or Best Offer
Inside Micrometer Hole Bore Internal Diameter Gage Gauge 5‑30mm 0.01mm Accuracy
$29.83$28.34 Buy It Now or Best Offer
BROWN & SHARPE 1 - 2" Machinist's Micrometer .0001" Carbide Faces, Spindle Lock
$65.78$60.52 Buy It Now or Best Offer
1 watcherMitutoyo No. 122-125 Blade Micrometer 0-1" .0001"
$125.00 Buy It Now or Best Offer
Brown & Sharpe Outside Micrometer 3-4" Swiss Made 599-4-33
$36.00 Buy It Now
fowler digital micrometer depth micrometer
$100.00 0 Bids or Buy It Now 6d 19h
Starrett 0-1" Blade Micrometer No. 486Mp-50
$110.00 Buy It Now or Best Offer
mitutoyo digital micrometer 293-369 0-1"
$45.00 0 Bids or Best Offer 6d 19h
Starrett 436Rl-2 Micrometer (Bj6000220)
$69.99 Buy It Now or Best Offer
1 watcherMitutoyo Standards
$40.00 Buy It Now or Best Offer
Fowler No. 52-250-111 Disc 0-1" Micrometer W/ Ratchet Stop.
$45.00 Buy It Now or Best Offer
Starrett 216RL-1 Digital Outside Micrometer, 0-1"
$76.00 Buy It Now or Best Offer
1 watcherLUFKIN 514 0-6” DEPTH MICROMETER SET In Wood Case Machinist Tool Maker Box
$79.98 Buy It Now or Best Offer
Starett 4-5 micrometer no.436
$16.80 0 Bids or Best Offer 6d 18h
Micrometer Screw Gauge w/Lock, Nickel Plated Brass - Range 0-25x0.01mm
$19.99 Buy It Now or Best Offer
Starrett 2-3 inch micrometer no.436
$12.90 1 Bid 6d 18h
0-1" micrometer Cen-Tec Digital and vernier reading, GREAT COND. Carbide faced
$19.99 Buy It Now or Best Offer
Aerospace 0 - 1" Outside Micrometer W/ Carbide Tips, Ratchet Stop, And Case
$34.99 Buy It Now or Best Offer
Outside Micrometer 0-25mm With Wood Box .0001''
$14.99 Buy It Now
LUFKIN # 1912 OD Micrometer, 1" - 2" Range x .001" Graduations, Smooth Mvmt, EC
$10.00 Buy It Now or Best Offer
Starrett 216 Micrometer
$100.00 Buy It Now or Best Offer
Mitutoyo No. 146-131 Groove Micrometer 0-1in .001in Ratchet Stop
$175.00 Buy It Now or Best Offer
mitutoyo depth micrometer set DMC4-4
$50.00 0 Bids or Buy It Now 6d 17h
1 watcherStarrett "SPECIAL" 0-1 inch blade/point micrometer.
$89.00 Buy It Now or Best Offer
STARRETT Mechanical Outside Micrometer: 1″ Range, 0.0001″
$39.95 Buy It Now
Anytime tools 6-pack 0-6 inch outside micrometer set
$75.00 Buy It Now or Best Offer
Mitutoyo No. 103-217 Micrometer 2-3in .0001in Ratchet Stop
$60.00 Buy It Now or Best Offer
Mitutoyo 122-125 Blade Micrometer 0-1" .0001" Japan Type A Anvils
$135.00 Buy It Now
Starrett 463Rl (Bj6000215)
$24.99 Buy It Now or Best Offer
Mitutoyo Digital Micrometer 0-1"Model 293-340 IP65 Coolant Proof Caliper w/ Case
$159.88 Buy It Now or Best Offer
2 watchersStarrett 230M & 2M micrometers 0-25mm & 25-50mm.
$110.00 Buy It Now or Best Offer
mhc Outside Micrometer 4pcs Set, 0-100mm x 0.01mm, carbide tipped
$79.99 Buy It Now
Mitutoyo No. 101-117 Micrometer 0-1" .0001 Friction Thimble
$35.00 Buy It Now or Best Offer
Outside Micrometer Mechanical Digit Counter 2-3"/0.0001"
$19.99 Buy It Now
4 watchersMITUTOYO Inside Micrometer Set 2-12”
$32.00 0 Bids or Buy It Now 6d 16h
Brown And Sharpe Micrometer 0-1”
$12.99 0 Bids or Buy It Now 6d 16h
Vintage FOWLER MICROMETER RANGE GRADU 52-222-001 w Orig Box!
$25.00 0 Bids 6d 16h
3 watchersVintage SLOCOMB SPEEDMIKE MICROMETER USA w Orig Box!
$25.00 0 Bids 6d 16h
Mitutoyo No. 293-344 IP-65 Coolant Proof Micrometer 0-1" .00005"
$85.00 Buy It Now or Best Offer
Starrett No. 436 Outside Micrometer 9” To 10” Range Machinist Tool USA
$64.99 Buy It Now or Best Offer
Lufkin Micrometer Chrome Clad 2",1912,W/ Box & Instructions,Chart$19.95 Buy It Now
Mitutoyo No. 293-344 IP-65 Coolant Proof Micrometer 0-1" .00005"
$85.00 Buy It Now or Best Offer
STARRETT No. 2 Outside Machinist Micrometer 1-2" W/ Wrenchs
$14.99 Buy It Now or Best Offer
USED MITUTOYO 505-646-50 150mm DIAL CALIPER Tool MADE IN JAPAN .002
$52.00 Buy It Now
Igaging Digital Micrometer (P15004812)
$24.99 Buy It Now or Best Offer
Mitutoyo Code No: 543-110B Digimatic Drop Indicator. Needs Battery
$74.99 Buy It Now or Best Offer
FOWLER Mechanical Outside Micrometer: 1″ Range, 0.0001″ Graduation 52-240-001-1
$60.00$29.40 Buy It Now or Best Offer
VINTAGE STARRETT T230RL 0-1"inch Micrometer ATHOL MASS. USA , Needs Cleaned
$45.00 Buy It Now
L.S. Starrett No. 222 1 in 6" Deep Throat Sheet Metal Micrometer RATCHET STOP
$189.00 Buy It Now or Best Offer
Outside Micrometer Set, 0-12in, 0.0001in accuracy, imperial
$595.04 Buy It Now or Best Offer
2 watchersMitutoyo 1"-11" Range Micrometer Calibration Standard Mixed Set
$49.95 Buy It Now or Best Offer
Fowler Dial Depth Gauge
$20.00 0 Bids 6d 15h
1 watcher112-189 Mitutoyo 15 Degree Point Micrometer
$150.00 Buy It Now or Best Offer
Fowler Cylinder Bore Gauge Range 2" to 6"
$40.00 0 Bids 6d 15h
1 watchermitutoyo 12 Inch Dial Caliper 505-645-50
$50.00 0 Bids 6d 15h
Mitutoyo No. 293-344 IP-65 Coolant Proof Micrometer 0-1" .00005"
$85.00 Buy It Now or Best Offer
1 watcherPittsburgh Digital Micrometer With Case Metric & SAE #63647- NEW***JC684-3
$14.99 0 Bids 4d 15h
Brown and Sharpe No.215 Disc Micrometer Vintage Great Condition With Wood Box
$75.00 Buy It Now or Best Offer
Starrett 3-4" Outside Micrometer (.001") No. 436 USED
$19.99 Buy It Now
Mitutoyo No. 293-344 IP-65 Coolant Proof Micrometer 0-1" .00005"
$85.00 Buy It Now or Best Offer
Mitutoyo 112-226 Point Micrometer 1-2" .001" Ratchet, 30 Deg Steel Point display
$300.00 Buy It Now or Best Offer
1 watchermitutoyo Absolute Digimatic Caliper For Parts or Repair Not Working
$5.00 0 Bids 6d 14h
Starrett #S436Crlz Outside Micrometer Set
$659.95 Buy It Now or Best Offer
Starrett No 436 Outside Micrometer 4-5", .0001 Graduation USA Tool, Wrench & Box
$72.00 Buy It Now
3 watchersVintage Starrett LAST WORD 711 - F 1 " 1000 Precision Dial Test Indicator + BOX
$19.34 0 Bids 4d 14h
Starrett #436Xrl-7 Outside Micrometer
$163.95 Buy It Now or Best Offer
Mitutoyo No. 293-344 IP-65 Coolant Proof Micrometer 0-1" .00005"
$85.00 Buy It Now or Best Offer
Brown & Sharpe Micrometer 1 Inch 599-1-32 In The Box
$32.99 0 Bids 6d 14h
Starrett #436Fl-6 Outside Micrometer
$139.95 Buy It Now or Best Offer
- Helios Germany Depth Micrometer In Original Wood Case-
- STARRETT T436RL 1 inch in the box With All Paperwork - STARRETT T436RL 1 inch in the box. In excellent condition.Looks like it had little or no usage.All paper work is included.
- Starrett #449Az-1Rl Micrometer Depth Gage With Non-Rotating Blade - Wide (1.2 x 3.2MM). Blade can be turned with the fingers and positioned at any angle relative to the base. shoulders without the blade rolling off. Also, ideal for slots and recesses as narrow as. 045" (1.2MM).
- Mitutoyo 293-345 1-2" Ip65 .0005" Grad Digital Micrometer - Unit is very good shape. Has been Tested. Please See Photos. Please note that LCD display does not photograph well but display is quite strong.
- Starrett #446Az-1Rl Digital Micrometer Depth Gage
- SPT pickup tool 2102-PL 0.85MM-0.5MM-0.25MM - SPT pickup tool 2102-PL 0.85MM-0.5MM-0.25MM.
- Starrett #226Fl-4 Outside Micrometer - Spindle (the heart of our accuracy).
- Starrett 25mm To 50mm No. 1042 Micrometer Nice Used With Case - Starrett 25mm To 50mm No. 1042 Micrometer Nice Used With Case. Really clean smooth tool , comes as pictured .
- Starrett #T485Xrl V-Anvil Micrometer
- Water Quality Tester, 3 in 1 Tester for Drinking Water, 0-9990 PPM - 1 Digital TDS Tester. Error range: ±2%. Anyway we will try our best to avoid this kind of thing. Size: about 156 40mm / 6.14 1.57in.
- Vintage BROWN & SHARPE MFG CO MICROMETER #12 - Vintage BROWN & SHARPE MFG CO MICROMETER #12. Previous owners name engraved on one side n small letters. Thsnkx for looking
- Fowler 0-3" Micrometer 3 Piece Set .0001" United Airlines IOB - Marked with United Airlines stickers. Nice looking clean set. Local pick up is also available.
- Starrett No. 2 Outside Micrometer 1" to 2" Lock, Friction, Case, Standard .001 - Good used condition, as pictured. As you can see in the photos this is engraved. $8.40 for priority mail.
- *Starrett No. 230 Micrometer 0-1” .0001” engraved With Name - *Starrett No. 230 Micrometer 0-1” .0001” engraved With Name. Nice condition as seen in photos it is engraved with a name
- Mitutoyo 193-111 Digit Outside Micrometer Ratchet Stop 0-25Mm Range 0.001mm - Pressure apparatus: ratchet stop. minimum display (mm): 0.001. Plug: TypeA. Quantity: One. [ Country of Manufacture ]. [ Release Date(yyyy/mm/dd) ].
- Mitutoyo 293-345 1-2" Ip65 .0005" Grad Digital Micrometer - 293-345 is the actual part number.
- 17-641-2 SPI Enamel Outside Micrometer 1-2" w/Cert - 17-641-2 SPI Enamel Outside Micrometer 1-2" w/Cert. Will ship ASAP after I receive payment.
- Premium Outside Inch Micrometer With 4-5 Inches Measuring Range - The Vernier scale has 0.001" graduation intervals and 0.00024" accuracy for precise and accurate readings.
- 2 Mitutoyo Japan Micrometers 0-1", 1-2" With Case - 2 micrometers 0-1", 1-2". In very good condition. They both come with original case.
- Starrett #436 Outside Micrometer Set 1-3” - Starrett #436 Outside Micrometer Set 1-3”. 1- 3” Starrett1- 2” Starrett1- 1” HandyAll in smooth working condition.
- Vintage General Electric Micrometer Caliper Tool Preowned condition
- Mitutoyo outside micrometers OM125 - For standard and simple structure, it can be used in a wide range of applications. Plug: TypeA. [ Electronics ].
- 3203-66A outside Micrometer, 0" - 6", Graduation .0001" - Item model number 3203-66A.
- Fowler 52-240-007-1, outside Inch Micrometer with 6-7" Measuring Range - The vernier scale has 0.0001" graduation intervals and ± 0.0003″ accuracy for precise and accurate readings.
- Mitutoyo outside micrometers M110-50 103-138 - For standard and simple structure, it can be used in a wide range of applications. Plug: TypeA. [ Electronics ].
- Lufkin No. 514 Depth Micrometer W/Wood Case - Lufkin No. 514 Depth Micrometer W/Wood Case. This tool has a little wear from use. Overall pretty good used working condition. Check pics for questions good luck.
- VIS Set 4 Micrometers(0-1",1-2",2-3",3-4")W/Wooden Box Made Poland - VIS Set 4 Micrometers(0-1",1-2",2-3",3-4")W/Wooden Box Made Poland. These micrometers have a little wear from use. All are in nice used working condition. The tag did come off the 1-2" does not affect use. Overall nice set. Check pics for questions good luck.
- mitutoyo micrometer 12"-16" - mitutoyo micrometer 12"-16".
- Mitutoyo 295-313 Rolling Digital Tube Micrometer: 0 to 1", 0.0001" scale - For sale is a Mitutoyo 295-313 Rolling Digital Tube Micrometer: 0 to 1", 0.0001" scale. ITEM is in good working condition. Wood Case item is in is not original to the micrometer. Please see photos for condition. Shipping to US ONLY. PLEASE EMAIL WITH ANY QUESTIONS.
- VINTAGE MITUTOYO No. 123-125A .001" DISC FLANGE MICROMETER RATCHET 0 - 1" w/box - VINTAGE MITUTOYO No. 123-125A .001" DISC FLANGE MICROMETER RATCHET 0 - 1" Includes wooden box, description and wrench. See pictures. Shipped via parcel select mail next business day.
- Transmstion Inc Model; 1045 Sn Temperature Calibrators - B7-1T 2-24-2020. AND CONDITION.
- Standard Measuring Rod 125mm Caliper Micrometer Calibration Block Rod - DescriptionSize - 125mm outside micrometer standard measuring block with high precision of ±0.001mm, universal caliper outside diameter calibration rodMaterial - Made of high-carbon steel, ensure durability and accuracy, making it a reliable tool that can provide accurate readings over time.Feature - The micrometer standard calibration rod has a known length that is used to check the accuracy of the micrometer before measuring an object's thickness or length.Application - Available in various sizes, these micrometer standard calibration rods are commonly used in manufacturing, research, and quality control settings where precise measurements are necessary.Usage:Insert the rod between the micrometer jaws and compare the reading to the known length with a tolerance of a few microns.
- Digital Professional Inch/Metric Thickness Measuring Tools Micrometer - Ratchet stop for using flexible. Hard protective case for protection.
- Mitutoyo Digimatic Climp Hit Micro 342-271-30 CHM-20MX
- Starrett 0-1” Outside Micrometer - Starrett 0-1” Outside Micrometer. Good shape. Has some slight surface blemishes. Works great as it should.
- Brown & Sharpe 608 Vintage Depth Micrometer - If you are not able to pick up locally, we are able to get competitive freight quotes as well.
- Vis 0 TO 12” OD MIC MICROMETER SET MADE IN POLAND .0001" GRADS In Dovetailed Box - Vis 0 TO 12” OD MIC MICROMETER SET MADE IN POLAND .0001" GRADS In Dovetailed Box. Condition: Excellent used condition. Was used at a small engine repair shop until the owner retired. Comes exactly as pictured, complete in the box.ALL REASONABLE OFFERS CONSIDERED!Buyer pays shipping
- Starrett No 823A Inside/Tubular Micrometer Set in wood case 1 1/2-8” Range - Starrett No 823A Inside/Tubular Micrometer Set in wood case 1 1/2-8” Range. Micrometer head moves freely and very smoothly. I am not able to verify if the rods are set accurately but they are easily adjustable. Please take a look at the pictures and reach out if you have any questions.Thanks for looking!!
- Mitutoyo Digimatic Rin Phhait Mai Black 342-271-30 CHM-20MX from Japan - Japan Usage Item. the manufacturer may change contents of the products, release date and quantity per unit for sale. However many of manufacturers have English Instruction manuals on their web site where you can down loaded it.
- STARRETT 0-6 Inch BLADE DEPTH MICROMETER SET NO 449 - Up for sale is a " STARRETT 0-6 Inch BLADE DEPTH MICROMETER SET NO 449 " in excellent working condition, 2 1/2" WIDE BASE, spindle turns freely, spindle lock works, complete with (1) STARRETT BLADE DEPTH MICROMETER NO 449 ~ (6) RODS to measure depths from 0-6 inches & (1) ADJUSTING WRENCH, no personal etchings-case has wear on the top(see pictures), company closure, clean beautiful working useful tools!(as shown in pictures) Please take a minute to look at our other items. No pickups or deliveries. Some tools may need re-calibrating. If something isn't in our description or pictured, you can assume it's not included! Good Buying!
- Mitutoyo No. 122-125 0-1" Blade Micrometer .0001" Japanese Made - Mitutoyo No. 122-125 0-1" Blade Micrometer .0001" Japanese Made.
- MITUTOYO 0-3 Inch MICROMETER NO 103-922 w/ CASE - Up for sale is a " MITUTOYO 0-3 Inch MICROMETER SET NO 103-922 w/ CASE " in good working condition, no chips on the carbide faces, spindles turn freely, ratchet stops work, spindle locks work, no personal etchings-some stains on the thimble, company closure, clean beautiful working useful used tools!(as shown in picture) Please take a minute to look at our other items. No pickups or deliveries. Some tools may need re-calibrating. If something isn't in our description or pictured, you can assume it's not included! Good buying!
- 7111-1105 Micrometer Stand - Fully adjustable micrometer clampNon marringLacquered cast iron baseClamping capacity is 5/8"e;Flat frame style
- Micrometer Set 0-6" and Telescoping Bore Gauge Cylinder Measurement - Fitted wood case included! Graduations: 0.0001" Laser Etched Graduations will never fade! Hard Shell Padded Case Included. Bore Gauge: 6 Pieces range: 5/16" - 6".
- 337-303 Digimatic Tubular LCD Inside Micrometer, Extension Rod Type, 8-40" - Solid extension rods help provide durability.
- Fowler Auto Tread PLUS Tire Gage 74-225-505-0 Fowler 74-225-505-0 64679522051900 - Fowler Auto Tread PLUS Tire Gage NOW Reads in 1/32 industry standard increments. NOW IP54 protected against fluid and dust. NEW Super-large LCD display, 14mm height. NEW Easy access HOLD button 74-225-505-0.
- AjantaExports Profile Projector Optical Comparator Measuring micrometer - AjantaExports Kjeldhal Digestion Unit Without Glass Parts 3 Tests Mantle Type. AjantaExports Human Digestive System Fiber Model 21”X8” Long. AjantaExports Male Genital Organs Model Dissectable. Simple Profile Projector.
- Professional Digital Outside Micrometer with Carbide Tip 0-1"e;/0-25mm Me... - Expected battery life lasts 1 year. At SANDOR Tool we only use the highest quality materials in our products suitable for hobbyist work to professional jobs, and we go the extra mile to stand by our tools.
- 1-2” Mitutoyo 293-345-30 Ip65 .00005” Digital Micrometer - 1-2” MITUTOYO 293-345-30 IP65 .00005” DIGITAL MICROMETER. Used. Good condition. Without case.
- Vintage Central Tool Company micrometer set USA MADE - Vintage Central Tool Company micrometer set USA MADE. stuck and won't turn
- BROWN & SHARPE # 264 Inside ID Micrometer SET
- Antique Rare Brown & Sharpe Mfg. Co. Micrometer No. 20 - Pat Jan 22 1884 - Antique Rare Brown & Sharpe Mfg. Co. Micrometer No. 20 - Pat Jan 22 1884.
- Vintage Starrett Micrometer Caliper No. 224 Set AA Range 0 to 4" /original box. - The wood box is in very good condition and the paper information sheet on the lid is mostly readable but in poor condition.
- Mitutoyo 103-181 Outside Micrometer, 4-5" Range, .001" Graduation - Graduation.001". Range: 4-5".
- Scherr Tumico 07-0050-12 Blade Micrometer Tubular Frame, 4-5" Range, .0001" - Range: 4-5". This item is professionally inspected and verified by our.
- Mitutoyo outside micrometers OM75 - For standard and simple structure, it can be used in a wide range of applications. Plug: TypeA. [ Electronics ].
- Mitutoyo outside micrometers OM100 - For standard and simple structure, it can be used in a wide range of applications. Plug: TypeA. [ Electronics ].
- Starrett No. 124 Micrometer Head Only For 124A/B Inside Micrometer Head Only - MODELS 124A OR 124B. MODEL # 124. Range (in) :0-1". UP FOR CONSIDERATION. FOR USE WITH. SEE PHOTOS FOR CONDITION DETAILS.
- Scherr Tumico 07-0040-12 Blade Micrometer Tubular Frame, 3-4" Range, .0001" - Range: 3-4". This item is professionally inspected and verified by our.
- Mitutoyo Micrometer No. 193-213, 2"-3", 0.0001", MECHANICAL Reading, Ratchet - Mitutoyo Micrometer No. 193-213, 2"-3", 0.0001", MECHANICAL Reading, Ratchet. Pre-owned in Very Good Used Condition. Carefully Packaged and Shipped with USPS Priority Mail
- Scherr Tumico 07-0020-12 Blade Micrometer Tubular Frame, 1-2" Range, .0001" Grad - Range: 1-2". This item is professionally inspected and verified by our.
- Starrett 483 V-Anvil Anvil 1" Micrometer, 0.0001",
- 6Pcs 0-150mm Precision Vernier Scale Micrometer Outside Micrometer Set Round - Vernier Graduations: 0.0003mm. Clear and easy-to-read graduation, accurate to 0.0003mm. Due to the light and screen difference, the item's color may be slightly different from the pictures. Product Display.
- Vintage STARRETT No. 436 1 INCH (1") Machinist Outside Micrometer Caliper Tool - Vintage STARRETT No. 436 1 INCH (1") Machinist Outside Micrometer Caliper Tool. Condition is Used. Shipped with USPS First Class.
- Mitutoyo 164-162 digital micrometer head - If it's not in the pictures, it's probably not included. S/N: 207111.
- Mitutoyo C/N164-164 digital micrometer head - If it's not in the pictures, it's probably not included. S/N: 60003935.
- Findmall 5-6" / 0.0001" Precision Outside Micrometer Carbide Tipped Micrometer - Specification： 5-6" x 0.0001" precision outside micrometer. carbide tipped measuring face ratched stop. lock nut. 0.0001" graduation reading Feature： This product has undergone rigorous quality testing Durable and easy to install and replace The most cost-effective and best after-sales service Quality assurance that gives you peace of mind Package Including： As The Picture Shows.
- Digital Electronic Display Thickness Gauge 0-1" / 0-25.4mm 0.0005" / 0.01mm - LCD with electronic digital display, easy to read. Specifications: Material: Auminum Alloy. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
- Vintage Starrett Micrometer 230 In Original Wood Box w Wrench + J.T. Slocomb - Vintage Starrett Micrometer 230 In Original Wood Box w Wrench + J.T. Slocomb Micrometer This is just as I found it, 2 micrometers in this nice original sliding cover wood box with Starret Micrometer wrench in envelope.Please look over the photos.U.S. buyer to pay $8.00 for Priority Mail.
- 1960's era CRAFTSMAN Commercial SAE/Metric vernier caliper w/leather case NMINT! - 1960's era CRAFTSMAN Commercial SAE/Metric vernier caliper w/leather case NMINT!. The calipers are like new condition and in hard to find metric from this era
- Aerospace 0-1" Blade Micrometer - Graduation 0.0001" - Changed your mind?. Sure no problem.
- SPI Indicating Micrometer 1-2" , Graduation 0.0001" - SPI 13-509-5 - Changed your mind?. Sure no problem. Good luck everyone!
- Fowler Inside Micrometer 1-2", Graduation 0.001" - Changed your mind?. Sure no problem.
- Starrett 14”-15” Micrometer - Starrett 14”-15” Micrometer. Vintage and good working condition! Lightly used!
- New Original Fitted Case Central Tool Of Cranston R.i. Four Piece Micrometer Set
- Starrett Micrometer 483XRL Special, Carbide V-Anvil, 1" - 2", for ODD FLUTES
- Vintage Lufkin No. 111 Outside Micrometer, 0-1" Range, .001" Grad - It has wear from use and staining/spotting from storage, but overall it's in good usable condition with no previous owner's markings and the thimble turns smoothly.
- starrett 9-10 micrometer - starrett 9-10 micrometer. Is vintage but great working condition!For age great condition!
- Vintage Reed Small Tool Works 1" - 2" MICROMETER
- Vintage Central Tool Co. 1" - 2" MICROMETER
- Vintage Brown & Sharpe No. 38 1" - 2" MICROMETER
- Lufkin Rule Co. No. 1922 - 1" - 2" MICROMETER with Box - Lufkin Rule Co.
- Starrett T1230XRL Stainless Steel Micrometer, Carbide Anvil-Spindle 0-1" Range - Starrett T1230XRL Stainless Steel Micrometer, Carbide Anvil-Spindle 0-1" Range.
- Starrett ST436.1BXRLZ 0 - 4" Outside Micrometer Set - Starrett ST436.1BXRLZ 0 - 4" Outside Micrometer Set.
- Mitutoyo 117-107 Interchangeable Anvil Micrometer - Mitutoyo 117-107 Interchangeable Anvil Micrometer. Has engraving on the bottom.
- Mitutoyo 117-107 Interchangeable Anvil Micrometer - Mitutoyo 117-107 Interchangeable Anvil Micrometer. Has engraving on the bottom.tjis is. Nice used micrometer. Company switched to digital and retired all of the analog tools.
- Vintage Micrometer Parts / Display Only - For Display/Parts Only. Moves freely. 3 3/4" Long.See Photos for grade. Check back soon.
- Scherr Tumico 4 Piece 0-4" Outside Diameter Micrometer Set wood case w standards - Scherr Tumico 4 Piece 0-4" Outside Diameter Micrometer Set wood case w standards. Set contains 4 outside micrometers 0 to 1" , 1 to 2" , 2 to 3" and 3 to 4" comes with wood case and 1" , 2" and 3" standards and wrench. All are in good shape lightly used. The outside of the wood box is stained and dirty. Free shipping con US only all others pay actual cost
- Lot of 4 Mitutoyo Digital Micrometers For Parts - These are used and are being sold for parts. None of them are in working condition. These all look to be made by Mitutoyo. There is one case included by Valco. Look at the photos to judge the condition for yourself.
- Craftsman DJ Outside Micrometer Set Machinist Mechanic Tool In Wood Box
- Lufkin 6pc Outside Micrometer Set - 0-1" 1-2" 2-3" 3-4" 4-5" 5-6" With Wood Case - Lufkin 6pc Outside Micrometer Set - 0-1" 1-2" 2-3" 3-4" 4-5" 5-6" With Wood Case. Used with nicks and scratches.
- SCHERR TUMICO MICROMETER, 1" to 2" INCH CAPACITY, WITH papers and ORIGINAL BOX - SCHERR TUMICO MICROMETER, 1" to 2" INCH CAPACITY, WITH papers and ORIGINAL BOX. Lightly used in great shape. Free shipping con US only all others pay actual cost. I combine auctions, thanks for looking.
- Starrett 796.1XRL-1 Electronic Micrometer, 0-1"/0-25mm Range, .00005"/0.001mm-FS
- 0-1” Mitutoyo 117-107 Multi Anvil Micrometer .0001" - 0-1” MITUTOYO 117-107 MULTI ANVIL MICROMETER .0001". Used, in good working condition. (Without original anvils) free shipping.
- STARRETT NO. 823AZ TUBULAR INSIDE MICROMETER SET 1-1/2" - 8",.001'',Made In USA
- 0-1” Mitutoyo 293-340-30 Digital Micrometer, Inch/Metric, Ratchet Stop - 0-1” Mitutoyo 293-340-30 Digital Micrometer, Inch/Metric, Ratchet Stop. Like new!! Very clean.
- Starrett No 233 0-0.5 Inch Satin Chrome Ratchet Micrometer Machinist Tools Rare - Ratchet Stop Works Well. I Enjoy Collecting Early, Hard To Find Machinist Tools.
- Starrett No 2 1-2 Inch Satin Chrome Ratchet Micrometer Machinist Tools - I Enjoy Collecting Early, Hard To Find Machinist Tools.
- Machinist Tool Lot LS. Starrett, Mitutoyo Geo Scherr ETC - Machinist Tool Lot LS. Starrett, Mitutoyo Geo Scherr ETC. Some Have Initials Engraved And Some Have ALittle Surface Rust. These Are UNTESTED And AS IS! Please Look At All Pictures And Message For More If Needed. Condition Is Used!AS IS! UntestedUSA Shipping USPS Priority Shipping
- Fowler Point Outside Micrometer 1-2" Carbide Tipped Ratchet Stop in case
- Starrett #T1212Xrl Stainless Steel Micrometer - Readability features satin finish stainless.
- Vintage Mitutoyo 1-2 .0001 Micrometer. Made in Japan - Made in Japan. Works like new.
- Starrett #575Fp Screw Thread Micrometer - Tool is accurate.
- Starrett no. 445 Depth Micrometer Gauge Set 0"-6" - This is a Starrett no. 445 Depth Micrometer Gauge Set 0"-6" in good working condition. The case is in well used condition.
- Starrett #575Ep Screw Thread Micrometer - Screw threads. Tool is accurate to plus or minus. 0002" or 0.004MM, decimal equivalents. spindle and a double V anvil.
- Tesa Group 0-1" Outside Micrometer 1" Locking Swiss Made - TESA GROUP 0-1" OUTSIDE MICROMETER 1" LOCKING SWISS MADE. Excellent working condition. Please see photos for light cosmetic wear
- Starrett #210Ap Screw Thread Comparat0R Micrometer - (Used for quick comparison of thread accuracy in screw. or locknut). Has 60 degrees conical anvil and spindle faces with 1/64" (0.4MM) flats on end of the points.
- Vintage Starrett Adjustable Micrometer 0-6” - Vintage Starrett Adjustable Micrometer 0-6”. I had a good laugh when I seen this, thinking no way could this be accurate. I have checked it and much to my surprise it’s very accurate. Was unsure of the brand, only markings were on the micrometer head as shown. After some research I found that starrett actually did produce these for some time. Pin is very tight in the holes, they may just need cleaned up. Adjustment slide feels very good. Threads on the micrometer also feel to be in good shape. Lock does not lock very hard. Ratchet works as it should. Any questions, feel free to message me. Thanks for looking!
- 3 Vintage L.S. Starrett Micrometers - 0-1", 1"-2" and 3"- 4" - #436 and #T230 - They include two numbered 436 - 1"-2" and a 3"-4"; other one is numbered T230 - 0-1". Could probably use a cleaning and an oiling.
- Mitutoyo 0-3” Micrometer Set 103-179 103-178 103-177 - Mitutoyo 0-3” Micrometer Set 103-179 103-178 103-177. Ratchet thimble missing from 2" and 3". 1" Standard included (no 2"). Comes as shown in photos.
- Starrett #569Bp Tube Micrometer
- Starrett #701B Internal Groove Micrometer - With 701B. Tool is accurate to plus or minus. 0002". Hardened and ground.
- Starrett #700A Inside Micrometer Caliper - And ground on a radius for accurate feel without cramping.
- Mitutoyo ID Inside Micrometer Set Wood Case 3"-12" .001" - Mitutoyo ID Inside Micrometer Set Wood Case 3"-12" .001". Includes only as shown in photos.
- mitutoyo digital micrometer 0-1 - Mitutoyo 0-1 inch micrometer. In the original factory case. Gently used in like new condition.
- Lot/3 Micrometer 436-1" Starret, 2" Brown&Sharp, 2" Tubular Micrometer Co - Lot/3 Micrometer 436-1" Starret, 2" Brown&Sharp, 2" Tubular Micrometer Co. In typical vintage condition. See photos.
- Outside Machinist Micrometer.N-0-1 - Locking Lever. Number Stamped 96830. In inside the wood case.
- Micrometer Dial 0-10mm, 0.01mm USSR, saphire tip - I bought this instrument, new some 30 years ago and kept it unused in its box till now. It is in perfect and working condition as seen on the photos.
- Vintage Starrett No. 436 Outside Micrometer 3" to 4" .001 (K) - Vintage Starrett No. 436 Outside Micrometer 3" to 4" .001.
- Machinist Starrett Micrometer and Other Starrett Tools - Included in the lot of used Starrett machinist tools is a No.2RL 1-2" micrometer. This mic has the standard, wrench and nice black box included. There is also a C309R 6" steel rule and a No.423 rule set. The micrometer ball attachment is a No. 247D. All these tools appear to be in very good condition. They do have the previous owners name lightly engraved on them.
- Starrett Last Word Indicator With Surface Gage Set - 160 DAY RETURNS ON THIS ITEMS WE DO COMBINE SHIPING
- Starrett No. 211-1 Micrometer 0-1" Round Anvil - Starrett No. 211-1 Micrometer 0-1" Round Anvil. Checked for accuracy. Threads feel great, non-ratcheting no lock. Cosmetically has wear, please check all photos for details. Any questions feel free to contact me, thanks for looking!
- Starrett 448 Depth Gage 6" - 180 DAY RETURNS ON THIS ITEM WE DO COMBINE SHIPPING
- Mitutoyo 293-348-30 IP65 0-1" Digimatic Micrometer - Mitutoyo 293-348-30 IP65 0-1" Digimatic Micrometer. In almost new condition very small engraving on it. If u have any questions feel free.
- Mitutoyo 103-127 0" - 1" .001" OD Micrometer Outside Measuring Guage - Mitutoyo 103-127 0" - 1" .001" OD MICROMETERWhat you see is what you get. Please ask for any questions.
- MITUTOYO 0-25 MM - 0.01 Micrometer No 230M CARBIDE FACES - 180 DAY RETURNS ON THIS ITEM WE DO COMBINE SHIPPING
- Mitutoyu no. 115-153 Compression Micrometer Round Anvil - Mitutoyu no. 115-153 Compression Micrometer Round Anvil. Showing signs of cosmetic wear, missing paint in some places. Numbers are easily readable. Lock lever is broken. Checked for accuracy and measures very good. Thread feels like new, no hang-ups. Any questions please send me a message, thanks for looking!
- STARRETT 0-1" Micrometer No 230M CARBIDE FACES - 180 DAY RETURN POLICY ON THIS ITEM WE DO COMBINE SHIPPING
- Vintage Starrett No.436 Outside Micrometer. 2” To 3” (K) - VINTAGE STARRETT NO.436 OUTSIDE MICROMETER. 2” TO 3” (K).
- Mitutoyo 293-336-30 Digimatic mircometer 1-2" Ratchet Thimble. - Mitutoyo 293-336-30 Digimatic mircometer 1-2" Ratchet Thimble.. I’m good condition just worn down on the plastic handle. Other then that small engraving on it but everything works just fine. Reach out if u have any questions
- Starrett NO. 436-1 Ratcheting Outside Micrometer 0-1" - Starrett NO. 436-1 Ratcheting Outside Micrometer 0-1". Used in great condition. Checked for accuracy, reads great. Ratchet works as it should. Carbide tipped. Multiple for sale, listing is for 1 micrometer. All micrometers are identical in condition, please review pictures. Any questions please contact me, thanks for looking!
- Vintage Starrett 445 Micrometer Depth Gage 0-3" Set w/ Wooden Case - Vintage Starrett 445 Micrometer Depth Gage 0-3" Set w/ Wooden Case. Name markings. No wrenches. See photos.
- Mitutoyo 293-346-30 Digimatic Micrometer - 2"-3" Range - Mitutoyo 293-346-30 Digimatic Micrometer - 2"-3" Range. In fantastic condition very small engraving on it. Other then that fantastic. Feel free to reach out for any questions.
- Mitutoyo 293-343 3-4” - MITUTOYO 293-343 3-4”. In fantastic condition very small engraving on it. Other then that fantastic. Have any questions feel free to reach out.
- 0-25mm METRIC MICROMETER SLIGHTLY USED - 0-25mm METRIC MICROMETER SLIGHTLY USED.
- Used L S Starrett Co. Micrometer Model 230 - 1" silver - Used L S Starrett Co. Micrometer Model 230 - 1" silver. This micrometer is in very good condition. No rust or discoloration. It has the previous owner’s initials engraved on it, (S.H,)Nice tool. Buyer pays priority flat rate envelope cost, $9.65.
- `Vintage L.S. STARRETT Wrench for Micrometer Athol, Mass. U.S.A. - `Vintage L.S. STARRETT Wrench for Micrometer Athol, Mass. U.S.A..
- Brown & Sharpe 0-1" No. 1 micrometer, .0001" Carbide Tipped With Case - Brown & Sharpe 0-1" No. 1 micrometer, .0001" Carbide Tipped With Case. Used with nicks and scratches.
- Starrett Outside 0-6" Micrometer Set No.436 - Starrett Outside 0-6" Micrometer Set No.436. Ratchet stop and lock nut. All function as they should. Sticker on handles show last calibration date of 8-13-89.
- Geo Scherr Co. NY 2-3" Outside Micrometer Machinist Tool - Spins Like New. I Enjoy Collecting Early, Hard To Find Machinist Tools.
- Machinist Tools 10" Depth Micrometer Set - This is a Scherr-Tumico depth micrometer set. It has a 5" base and a measurement range from 0 to 10". The set appears to be in excellent condition. It does however have the previous owners name engraved on the base. It comes in the wooden box shown.
- mitutoyo 103-220 Outside micrometer 5" to 6" - This micrometer is in used condition.
- mitutoyo 103-219 Outside micrometer 4" to 5" - This micrometer is in used condition.
- Mitutoyo 293-341-30 Digimatic Ratchet Stop Micrometer, 1-2"/25-50mm Range .00005 - Mitutoyo 293-341-30 Digimatic Ratchet Stop Micrometer, 1-2"/25-50mm Range .00005.
- Fowler 1-2" Outside Diameter Micrometer Carbide Tipped .0001" - ADJUSTING TOOL.
- Brown & Sharpe No. 10 Micrometer. 1 Inch - Brown & Sharpe No. 10 Micrometer. 1 Inch. Please refer to pictures and don’t hesitate to ask questions! Thanks for looking!
- J.T. Slocomb Co. 5 to 6 Inch Outside Micrometer Analog. Providence, RI, USA - Very nice condition, was in my tool box for over 50 years.
- Vintage Unbranded Outside Micrometer - I appreciate you for being here.
- Mitutoyo No. 159-101 Combimike 0" to 1" / .001" mm to 25 mm Outside Micrometer - Good condition, not storage box.
- Millers Falls Micrometer 1-64 015625 - Millers Falls Micrometer 1-64 015625.
- Starrett Micrometer Caliper Vintage - Do not know much about this item. All paper etc. was in box with caliper.
- Mitutoyo 103-259 Micrometer gauge , 0 To 1",0.001, machining tools A+ - Does not look like it was used much. Very good condition.
- Starrett No. 436 Outside Micrometer 2-3", .0001 Graduation USA Ratchet Stop VGUC
- Mitutoyo 293-349 0-1” Digimatic Micrometer .0001” .001mm accuracy EUC complete ! - This Mic is accurate to tenths. 0001” and. 001mm. I did install a fresh battery in this as it’s been sitting basically unused in my toolbox for 10+ years. Overall I’d call this excellent barely used condition with the only scuffs I see are on the backside plastic.
- Mitutoyo 293-344 0-1” Digimatic Micrometer .00005” .001mm Accuracy EUC - New battery just installed in this as it’s also been sitting in my toolbox for years basically unused.
- Mitutoyo 293-345 1-2” Digimatic Micrometer .00005” .001mm Accuracy EUC - Mic accuracy is. 00005” and. 001mm. Fresh battery just installed in this mic also as it’s been sitting in my toolbox for 10+ years with very minimal use. This mic as well is in excellent, very lightly used condition.
- NSK Japan YABW 01-1 0-6" Boxed Micrometer Set with Standards, Used Very Little - NSK Japan YUABWO1 0-6" Boxed Micrometer Set with Standards, Used Like New.
- Nsk 711-406 Depth Micrometer 0 To 3" - In Wooden Case - NSK 711-406 DEPTH MICROMETER 0 TO 3" - IN WOODEN CASE.
- Digital Micrometer Swiss Made Brown & Sharpe 599-10-1 DIGIT-MIKE 0-1" - Digital Micrometer Swiss Made Brown & Sharpe 599-10-1 DIGIT-MIKE 0-1". Has a crack in the plastic cover. No Case.
- Vintage Union Tool Co. 12" Combination Square - Tempered No. 4 - USA - Up for bid is this combination square and steel rule. Ships to USA and ebays global program.
- NOS VINTAGE SCHERR-TUMICO OUTSIDE MICROMETER 3-4" range 1804-LN - NEW OLD STOCK
- RARE Tumico 1-2 inch micrometer 1802-LNV NOS - NEW OLD STOCK. BEEN SITTING IN STORAGE FOR DECADES BY A HOARDER.
- Starrett #436 1 Inch to 2 Inch Outside Micrometer - Starrett #436 1 Inch to 2 Inch Outside Micrometer. Has rust but works as intended.
- Vintage Starrett Inside Micrometer With Case Needs Some Cleaning ;Machinist Tool - THE RODS ARE 3-4; 5-6; 6-7. LOOK AT THE PICTURES. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. NO WARRANTIES GIVEN OR IMPLIED.
- Mitutoyo Outside Micrometer Baked-enamel Finish Ratchet Stop 0-1” - Mitutoyo Outside Micrometer Baked-enamel Finish Ratchet Stop 0-1”.
- Mitutoyo coolant proof micrometer MDC-25PX 293-421-20 from Japan - All my products are 100% official products. The goods are all in the photograph.
- Unused Mitutoyo coolant proof micrometer MDC-25PX 293-240-30 from Japan - All my products are 100% official products. The goods are all in the photograph.
- Brown & Sharpe 0-1" Micrometer - Brown & Sharpe 0-1" Micrometer.
- Vintage Starrett 230M Metric Outside Micrometer 0-1” Made In USA - Has some minor rust, blemishes, and other signs of wear and previous use. Please see pictures for condition.
- Brown & Sharpe 599-1-32 Convertible Thimble Outside Micrometer 0-1" Range France - Brown & Sharpe 599-1-32 Convertible Thimble Outside Micrometer 0-1" Range France.
- SHARS 0-1" 0.00005" Digital Electronic Outside Micrometer Carbide Tip 0-25mm - Resolution.0005"/.001mm. Accuracy: +/-. 00015" / +/- 0.003mm. Large LCD display.
- Brown & Sharpe No. 48 .0001" Carbides Micrometer w/ Box Machinist Tools USA B&S - Brown & Sharpe No. 48 .0001" Carbides Micrometer w/ Box Machinist Tools USA B&S.
- Starrett Special York Machinery RS1019-5L-P 0-1" Micrometer - Starrett Special York Machinery RS1019-5L-P 0-1" Micrometer.
- Tumico Micrometer Set - TUMICO MICROMETER SET. May need to be greased to go up and down better
- Mitutoyo Coolant Proof Micrometer MDC-25PX 293-240-30 From Japan [Unused] - Condition:[ UNUSED ].
- 2 Vintage Central Tool Co. Outside Micrometers - 1/2 & 2/3 Estate Finds - PREVIOUS USE - ESTATE FIND. PAIR OF CENTRAL TOOLS.
- MITUTOYO 345-250-30 Micrometer Caliper Inside 5mm-30mm 0.001mm IMP-30MX [Unused] - Condition:[ UNUSED ].
- Mitutoyo Coolant Proof Micrometer MDC-75MX 293-232-30 From Japan [Unused] - Condition:[ UNUSED ]. ~Caustions~.
- Mitutoyo Coolant Proof Micrometer MDC-100 PX 293-243-30 From Japan [Unused] - Condition:[ UNUSED ].
- STARRETT - T436RL - 0-1" Outside Micrometer w/Hard Case - EXCELLENT!
- Brown and Sharpe 1" Diameter Micrometer Standard - 1.0000" Round
- Lot Scherr Tumico 463 0-1" Range .0001" Grad Plain Micrometer Heads
- Anytime Tools 0-6" Premium Outside Micrometer Machinist Tool Set Round Frame... - Ratchet Thimble handle for precise application of force. Fitted wood case included! Item model number : AT201876.
- Custom Machinist V-Block with attached Depth Mic 1" travel
- Starrett 436P-2 Outside Micrometer 1"-2" Range .001" Grads
- STARRETT 823CZ Inside Micrometer Set - 4 to 24 In - w/Padded Case - NICE - STARRETT 823CZ Inside Micrometer Set - 4 to 24 In - with Padded Case - NICE
- Brown & Sharpe No. 11 Outside Micrometer 1" x .001" + .200" Ball Attachment - Brown & Sharpe No. 11 Outside Micrometer 1" x .001" with .200" Diameter Ball Attachment
- STARRETT 436FL-1 Outside Micrometer Carbide Anvils .001” Grad w/Box - STARRETT 436FL-1 Outside Micrometer Carbide Anvils, Friction Thimble and Spindle Lock .001” Grad w/Box
- SPI Outside Micrometer No. 13-479-1 3"-4" - Carbide Faces - .0001" Grads - NICE - SPI No. 13-479-1 Outside Micrometer 3"-4" - Carbide Faces - .0001" Grads - NICE
- NOS In Box Starrett 445AZ-9RL Depth Micrometer 0-9" Range .001" Grad USA
- Starrett No. 226L-3 Outside Micrometer 2”-3”, .001" Grads - No. 226
- Lufkin 5" Micrometer Standard End Measuring Rod
- Starrett 445BZ-6RL Depth Gage Micrometer Set 4" Base - 0-6" Range w/Case - Starrett 445BZ-6RL Depth Gage Micrometer Set 4" Base - 0-6" Range with Padded Case and Box
- Starrett No. 226RL 2-3" Outside Micrometer .001" Grads USA
- Mitutoyo No. 103-218 Outside Micrometer 3"-4" Range Carbide Tipped .0001" Grads
- Starrett Pt09948-10 Rod W/Point Inside 823 Tubular Micrometer 10” Extension
- Vintage Scherr-Tumico Inside Micrometer .200" -1.200" Diameter Range .001"
- Starrett No. 224 Set G Outside Micrometer Set 6"-11" Interchangeable w/Standards - Rod Standards: 6", 7", 8", 8", 9", 10", 11". Set is missing the 11"-12" anvil.
- SPI Mechanical Outside Micrometer 0 to 1" Range .0001" Grads - Carbide Tipped - SPI Mechanical Outside Micrometer 0 to 1" Range .0001" Grads - Carbide Tipped Anvil and Spindle
- Starrett #436RL-1 Outside Micrometer 0"- 1” Range - .001" Grads - Ratchet / Lock
- Mitutoyo 167-145 5" Micrometer Standard End Measuring Rod
- Starrett T226XRL-4 Outside Micrometer 3-4" Range Carbide Tipped .0001"
- Lufkin Rule 1" Diameter Micrometer Standard - 1.0000" Round
- Starrett 440Z-9RL Depth Micrometer 0-9" Range .001" Grad 2-1/2" Base 440 - Starrett 440Z-9RL Depth Micrometer 0-9" Range .001" Grad 2-1/2" Base
- Starrett 436.1XRL-1 Outside Micrometer - .001" - Carbide Anvils - 0-1" with Case
- Starrett 445BZ-3RL Depth Micrometer, 0-3" Range, .001" Graduation 4" Base w/Case
- Vintage Lufkin 4 pc Outside Micrometer Set - 0"-4" .001" Grads - 1911-1914
- Starrett 436P-3 Outside Micrometer 2"-3" Range .001" Grads
- STARRETT 445 0- 6" Depth Micrometer Set 4" Base - Ratchet, Lock & Case Machinist
- Starrett No. T436XRL-4 Outside Micrometer 3-4" Range, Carbide .0001" - NICE - Starrett No.
- Starrett 483XRL-2 V-Anvil Micrometer 1-2" Range, .001" Grads, Carbide Anvils - Starrett 483XRL-2 V-Anvil Micrometer 1-2" Range, .001" Grads, Carbide Anvils
- Starrett No. 436 7-8" (.001 Grad.) Outside Micrometer in Wood Case 436L-8
- Swedish Gage Company 1" Diameter Micrometer Standard - Hardened - Swedish Gage Company 1" Diameter Micrometer Standard - Hardened
- Fowler 0-1" (0-25mm) Electronic Outside Micrometer Bluetooth Kit 54-860-001-BT - Fowler 0-1" (0-25mm) Electronic Outside Micrometer Bluetooth Kit 54-860-001-BT.
- Flat Type Micrometer Head Machinist Precise Measuring Tool 0-13mm Range Silver - Suitable For: Optical instrumentation platform displacement amount of the fine adjustment. For XY table suitable for fine adjustment of a variety of precision instruments, and measuring equipment. LCD production and testing equipment. The liquid crystal prism camera positioning and loading. An optical fiber positioning, optical communication system products and testing equipment. The semiconductor manufacturing equipment and inspection associated evaluation device. Used for machine tools, fixtures, special measuring tools and other equipment adjustable micrometer precision parts need to have a place 8DVD, MD, CD-related CD read and write optical pickup lens production and testing equipment..
- Vintage Central Scientific Company CENCO Micrometer Caliper Dovetail Box - Central Scientific Company CENCO Chicago, Illinois.No 2349. 72660 Micrometer CaliperQuick research shows this company made tools for education use beginning in the early 1900s.Tool in nice working condition, wooden dovetail sliding top box, paper instructions on how to use included.Thanks for looking, please see all pics and ask if you have any questions, and happy shopping!
- starrett tools micrometer - starrett tools micrometer. 823 D missing adjustment wrench. Been sitting in a garage for years. Was used by a machinist in the Army during the Korean War but I have no documentation to prove it. Look in the photos. What you see is what you get
- SPI Electronic Blade Micrometer, 25mm - 50mm Range, 0.75mm Blade Thickness - SPI Electronic Blade Micrometer, 25mm - 50mm Range, 0.75mm Blade Thickness. Brand new in box. Free Shipping!
- Vintage Lufkin 680A Inside Micrometer Set 1-1/2" - 8" X .001 in Mahogany Case - Vintage Lufkin 680A Inside Micrometer Set 1-1/2" - 8" X .001 in Mahogany Case. In the condition as shown. Heads and rods have some surface rust as shown. The micrometer head is in decent condition and the function is still very smooth. In the box as shown.
- MITUTOYO Outside Micrometer 250-275mm 0.01mm Box 29x48x6cm 3.1kg HM31 - It is zero point aligned. The wooden box is big. As you can see in the video. Can not be bundled with other products. If the world is in pandemic chaos, it will take about one week to two months. (Depending on the situation, it may take longer for the product to arrive.).
- Genuine Mitutoyo 547-211 Absolute Digimatic Depth Gauge - New - About Importer's Obligation.
- Starrett model 124-B, 2"- 12" Inside Micrometer Set tool Tools - Looks to be complete, and it works as intended. Due to the many variations in monitors, browsers, phones, lighting, etc, colors may appear different on different devices. I have made my best effort to correctly identify and / or describe the color.
- MITUTOYO Outside Micrometer 25-50mm 0.01mm Box 8x6.5x2.5cm 0.3kg 27300 - It is zero point aligned. The wooden box is big. As you can see in the video. Can be bundled with other products. If the world is in pandemic chaos, it will take about one week to two months. (Depending on the situation, it may take longer for the product to arrive.).
- MITUTOYO Outside Micrometer 25-50mm 0.01mm Box 9x18x3cm 0.35kg 27299 - It is zero point aligned. The wooden box is big. As you can see in the video. Can be bundled with other products. If the world is in pandemic chaos, it will take about one week to two months. (Depending on the situation, it may take longer for the product to arrive.).
- Brown & Sharpe Micrometer Lot 0-1 1-2 2-3 3-4 USA Vintage Machinist J T Slocomb
- CENTRAL Tool Company Micrometer 0-1" Made in USA Machinist Tooling With Box
- MITUTOYO Outside Micrometer 50-75mm 0.01mm Box 10x19x3.5cm 0.45kg 27297 - It is zero point aligned. The wooden box is big. As you can see in the video. Can be bundled with other products. If the world is in pandemic chaos, it will take about one week to two months. (Depending on the situation, it may take longer for the product to arrive.).
- MITUTOYO Outside Micrometer 275-300mm 0.01mm Box 30x49x6cm 2.75kg HM30 - It is zero point aligned. The wooden box is big. As you can see in the video. Can not be bundled with other products. If the world is in pandemic chaos, it will take about one week to two months. (Depending on the situation, it may take longer for the product to arrive.).
- MITUTOYO Outside Micrometer 250-275mm 0.01mm Box 29x47x6cm 1.75kg HM29 - It is zero point aligned. The wooden box is big. As you can see in the video. Can not be bundled with other products. If the world is in pandemic chaos, it will take about one week to two months. (Depending on the situation, it may take longer for the product to arrive.).
- �7111-1105 Micrometer Stand�Flat frame style�Non marring�Lacquered cast bas - Lacquered cast iron base.
- MITUTOYO Outside Micrometer 225-250mm 0.01mm Box 27x44x5.5cm 2.15kg HM28 - It is zero point aligned. The wooden box is big. As you can see in the video. Can not be bundled with other products. If the world is in pandemic chaos, it will take about one week to two months. (Depending on the situation, it may take longer for the product to arrive.).
- Digital caliper 150mm Mahr 16ER with data output / #G T0CH 8546 - Important information! If you are not satisfied with the product - write to us.
- MITUTOYO Outside Micrometer 200-225mm 0.01mm Box 25x41x5.5cm 1.75kg HM27 - It is zero point aligned. The wooden box is big. As you can see in the video. Can not be bundled with other products. If the world is in pandemic chaos, it will take about one week to two months. (Depending on the situation, it may take longer for the product to arrive.).
- MITUTOYO Outside Micrometer 175-200mm 0.01mm Box 24x39x4.5cm 1.5kg HM26 - It is zero point aligned. The wooden box is big. As you can see in the video. Can not be bundled with other products. If the world is in pandemic chaos, it will take about one week to two months. (Depending on the situation, it may take longer for the product to arrive.).
- MITUTOYO Outside Micrometer 150-175mm 0.01mm Box 21x37x4.5cm 1.5kg HM25 - It is zero point aligned. The wooden box is big. As you can see in the video. Can not be bundled with other products. If the world is in pandemic chaos, it will take about one week to two months. (Depending on the situation, it may take longer for the product to arrive.).
- MITUTOYO Outside Micrometer 103-151 OM-375 350-375mm 0.01mm Box HM24 - It is zero point aligned. The wooden box is big. As you can see in the video. Can not be bundled with other products. If the world is in pandemic chaos, it will take about one week to two months. (Depending on the situation, it may take longer for the product to arrive.).
- Mitutoyo .5-.65” Holtest Internal Micrometer . Excellent Condition! - Mitutoyo .5-.65” Holtest Internal Micrometer with TiN coated anvils. Excellent Condition! Used a few times only. Like new. (Without original case). Costs $595 new.
- Starrett Digital Micrometer Set with Bluetooth
- Mitutoyo outside micrometers M110-25 - For standard and simple structure, it can be used in a wide range of applications. [ Country of Manufacture ]. Plug: TypeA. [ Electronics ].
- NSK depth micrometer set. 0-4” 461-407 Japan - NSK depth micrometer set. 0-4” 461-407 Japan. Check the pictures. All descriptions taken from box. Like new condition if used at all.Please ask questions and inspect pictures before bidding.
- Mitutoyo 293-231-30 Coolant Proof Digimatic Micrometer 25-50mm [Unused] - Condition:[ UNUSED ].
- Mitutoyo Digital Micrometer QuantuMike MDE25MX (293-140-30) From Japan [Unused] - Model number:MDE25MX. Condition:[ UNUSED ].
- Mitutoyo (Mitutoyo) Kanto Mike MDE-25MX 293-140-30 Measurement range: 0 to 25mm - Japan Usage Item. We do our best for you!! [ Multiple sizes and colors ].
- Mitutoyo 293-243-30 Digimatic Outside Micrometer, 75-100 mm, 0.001 mm with - Through all over the world.
- Mitutoyo MDC-50PX 293-241-30 Coolant Proof Micrometer - Through all over the world.
- Rare M106E Micrometer 0"-1" Carbide, 0001, Friction. C.E. Johansson, Sweden
- L.S.Starrett No.220 Anvil 0-1 Inch Anvil Micrometer,.001'',Machinist Tool USA
- Mitutoyo 229-132 Mechanical Depth Micrometer 0 to 6", 6 rods, Graduation .001 - Mitutoyo 0-6” depth mic in case, has all wrenches. In great condition.
- Starrett 823C 4"-24" Inside Micrometer Set USA Made - NICE - Starrett 823C 4"-24" Inside Micrometer Set USA Made - NICE.
- Vintage Craftsman 1-64 015625 Micrometer, Old Tool - Here is a vintage micrometer. It is marked, "Craftsman 1-64 015625 Made in U.S.A.". It is 5".It has initials engraved but is in good, usable condition. Shipping is $6.50. Thanks for looking.
- Starrett 124C Inside Micrometer Set with Wood Case 8" - 32" USA - Starrett 124C Inside Micrometer Set with Wood Case 8" - 32" USA.
- Mitutoyo 5-6" 103-220A Outside Micrometer W/ Carbide Tips Ratchet Stop. - MITUTOYO 5-6" 103-220A OUTSIDE MICROMETER W/ CARBIDE TIPS RATCHET STOP.. I have 2 other sizes listed as well!! Check them out and feel free to make an offer!! I will combine shipping as well!!
- Starrett 823B And Starrett 196A
- Starrett Micrometer 436P 8" Excellent In The Original Box - The tool looks unused. The wooden case looks excellent as well.
- Mitutoyo 542-612 Linear Gage New in Box
- MITUTOYO 3 to 4″ Range, 0.001″ Graduation, Mechanical Outside Micrometer 103-180 - MITUTOYO 3 to 4″ Range, 0.001″ Graduation, Mechanical Outside Micrometer 103-180. I have 2 other sizes listed as well!! Check them out and feel free to make an offer!! I will combine shipping as well!!
- Miller Falls Micrometer Collectible - Miller Falls Micrometer Collectible.
- Vintage Tumico 6-12" Micrometer w/Wood Case M1-6-12 New - Vintage Tumico 6-12" Micrometer w/Wood Case M1-6-12 New Never Used Top of Box has been refinished. Still has original cosmoline on it. Last picture is bottom of box.
- Vintage LUFKIN 5 PC. TELESCOPING GAGES 5/16 To 3-1/2” Machinist Tools - Vintage LUFKIN 5 PC. TELESCOPING GAGES 5/16 To 3-1/2” Machinist Tools. They do have some spots of light rust but they function like they should. Please ask questions. Shipping with USPS.
- Brown & Sharp MFG PROVIDENCE RI USA Micrometer Box Tongue/Groove Sliding Lid - Brown & Sharp MFG PROVIDENCE RI USA Micrometer Box Tongue/Groove Sliding Lid.
- Starrett Micrometer 436RL-2 EDP51593 Made in USA - Pre owned used condition, but in working condition. Like what you see?.
- Starrett 440 Solid Rod Depth Micrometer Set 0-3" Range
- Brown & Sharpe 263 Inside Micrometer Box No. 263 Machinist Tools USA B&S Vintage - Great used condition original tongue and groove box.
- Vintage 0"-1" Micrometer With Ratchet and Wood Box
- 0-4" Mitutoyo Digital Depth Micrometer Precision Inspection Machinist Tool - RANGE: 0-4".
- 11"- 12" Mitutoyo Digital Micrometer Inspection Precision Machinist Tool - RANGE: 11"- 12".
- Gaertner /A.O. Optical Micrometers (In Great Condition!) - Gaertner /A.O. Optical Micrometers.(In Great Condition!)Shipping to the United States only.Thank you for looking!E
- 6 - Vintage Starrett Machinist Outside Micrometer Set - All are made by The L.S. Starrett Co.
- 7 Key Digital Electronic Outside Micrometer Caliper 0-25mm/0-1" 0.00005"/0.001mm - Accuracy: 0.002mm/0.0001". Resolution: 0.001mm/0.00005". Material: Stainless steel. Clear ,Data hold ,Data preset ,Set tolerance range.
- starrett micrometer 9” range - Starrett 770BXTZ-9.
- Vintage Starrett Satin Chrome Micrometer Caliper #213 in Box w/ & Instructions - Vintage Starrett Satin Chrome Micrometer Caliper #213 in Box w/ & Instructions.
- Starrett 436M Outside Micrometer Metric 50 to 75mm & Wood Case Standard Wrench - Excellent condition, as pictured. Carbide faced, has the ratchet and lock, and comes with a 50mm standard. $14.50 for priority mail.
- Starrett 3732 0-1" Digital Micrometer In Case With Books - STARRETT 3732 0-1" DIGITAL MICROMETER IN CASE WITH BOOKS.
- Mitutoyo 129-128 5-6" .001 Depth Micrometer In Case - Here is a MITUTOYO 129-128 5-6" .001 DEPTH MICROMETER IN CASE
- STARRETT ID MICROMETER SET NO 124A w/CASE - 2-8 INCHES LIGHTLY USED - STARRETT ID MICROMETER SET NO 124A w/CASE - 2-8 INCHES LIGHTLY USED.
- Stm Micrometer 9"-10" - STM MICROMETER 9"-10".(B39)
- Tesa Tri-O-Bor digital bore micrometer - Tesa Tri-O-Bor digital bore micrometer. Superb condition and freshly calibrated to a 3.6000" ring. This one features interchangablemeasuring jaws tho only the 3.6 - 4.0 jaws are included in this auction.
- Stm Micrometer 7"-8" - STM MICROMETER 7"-8". (B29-1)
- Used E.j. Cady & Co. D.w.l. Automatic Micrometer Half Thousandth Of An Inch Dwl - Hello Ebay Shoppers, You are Bidding on a USED E.J. CADY & CO. D.W.L. AUTOMATIC MICROMETER HALF THOUSANDTH OF AN INCH DWL. All Sales are Final/As IsHappy Bidding!
- Vintage Brown & Sharpe Micrometer Caliper Box With Instructions - VINTAGE BROWN & SHARPE MICROMETER CALIPER BOX AND INSTRUCTIONS.
- Mitutoyo 293-346 2-3” Digimatic Micrometer .00005” .001mm Accuracy VGUC - Mic has accuracy of. 00005” and. 001mm. This mic also has had it’s battery just replaced, as it’s also sat in my toolbox for years with very little actual use. Overall still very good, 100% functional condition, just not the super clean look of it’s smaller siblings.
- MITUTOYO # 103-125 Metric Micrometer 0-25mm x .01 With Case Well Kept Small Spot
- STARRETT No.124 2" - 11" INSIDE MICROMETER - this is a starrett inside micrometer set. needs to be oiled and calibrated. it’s also missing the .500 spacer.
- Starrett 823EZ Tubular Inside Micrometer Kit 4 to 40 in Range - Starrett 823EZ Tubular Inside Micrometer Kit 4 to 40 in Range.
- Scherr-Tumico 4-5” Micrometer - Scherr-Tumico 4-5” Micrometer. Condition is Used. Shipped with USPS Parcel Select Ground.
- Tesa Tri-O-Bor digital bore micrometer - Tesa Tri-O-Bor digital bore micrometer. No markings. I cannot vouch for the calibration.
- Starrett 823BZ Micrometer, Inside - New in Open Box - Starrett 823BZ Micrometer, Inside in Case - New in Open Box.
- Vintage Starrett Inside Micrometer Set No. 124A With Box USA - Item still in original box, that has wear due to use, or long storage/handling.
- Starrett 445DZ-6RL Depth Micrometer Gage, Ratchet Thimble, 0-6" Range - Starrett 445DZ-6RL Depth Micrometer Gage, Ratchet Thimble, 0-6" Range.
- Starrett S436.1CXRLZ 436.1 Series, Ratchet Stop, Lock Nut, Carbide Faces,... - Starrett S436.1CXRLZ 436.1 Series, Ratchet Stop, Lock Nut, Carbide Faces,
- mitutoyo digital outside micrometer - mitutoyo digital outside micrometer. Brand new in box Certificate of Calibration Upon Request
- 331-511-30 Mitutoyo Digital Metric Spline Micrometer - 331-511-30 Mitutoyo Digimatic Micrometer. Brand new comes with Certificate of Calibration
- Starrett 0-6" Outside Micrometer Set 436 With Box USA Made W/ Standards, Case - Includes standards, wrench and wooden box. Set is complete. Shows very light wear if any.
- Optical Flat Parallel Set (micrometer calibration) 15.**mm Flächig glass platten - The cylindrical surface of the plates must be matte, except for the area intended for marking. Plate height, mm 15. The material of the plates is glass grade K8 GOST 3514-76.
- indicator dial micrometer 0.01mm ussr - Vimir range 0-10 mm. The price of a fake is 0.01 mm.
- indicator dial micrometer 0.01mm ussr - Vimir range 0-10 mm. The price of a fake is 0.01 mm.
- Optical Flat Parallel Set (micrometer calibration) 15.**mm Flächig glass platten - The cylindrical surface of the plates must be matte, except for the area intended for marking. Plate height, mm 15. The material of the plates is glass grade K8 GOST 3514-76.
- 389-361 Digimatic Micrometer - 389-361 Digimatic Micrometer. Brand new with Certificate of Calibration
- Micrometer MOM BUDAPEST 0-25mm 1/100mm 0,01mm Tool MSZ11152 A500 042597 Vintage
- Vintage 1930s Starrett Inside Micrometer Set No. 124A With Box USA - Item still in original box, that has wear due to use, or long storage/handling.
- Mitutoyo 523-107 Carbide Tipped Dial Snap Meter 0-1" with Stand (a) - Mitutoyo 523-107 Carbide Tipped Dial Snap Meter 0-1" with Stand (a). Brand New Comes with Certificate of Calibration Upon Request
- Tesa Tri-o-Bor digital bore micrometer - Tesa Tri-o-Bor digital bore micrometer. Note areas where markings were removed. I cannot vouch for the calibration.
- SPI 17-826-9 Digital Depth Micrometer 0-6" New IP65 SPC Output Machinist Tools - SPI 17-826-9 Digital Depth Micrometer 0-6" New IP65 SPC Output Machinist Tool. SPI IP65 Electronic Depth Micrometer0-6" Range, 4" Base LengthIP65 dust and water protectionRatchet stopInch/Metric absolute and incremental dataResolution: 0.00005"/0.01mmAccuracy:- ±0.0002" up to 6"- ±0.00028" over 6"SPC/USB data outputAutomatic shut-offBattery: 357/303 includedFlat end rodsShort Form Certificate of Calibration includedFurnished in fitted caseCheck other listings for New Digital Mitutoyo and Starrett Tools for significantly less than retail.
- Lufkin no. 1911 micrometer 0"-1" with leather holster - Lufkin no. 1911 micrometer 0"-1" with leather holster. Measures to .0001. See photos, Item Specifics and Condition Description. See my store for other tools.
- NEW NOS Mitutoyo 158-119 OPTICAL FLAT
- NEW NOS Mitutoyo Metric Dial Bore Gauge 50-100mm (511-174)
- USED MITUTOYO 129-128 Depth Micrometer DMC with Wooden Case
- Vintage Craftsman D.J. 0-1" Outside Micrometer - Made in USA!!!! - The item pictured is the item you will receive.
- Mitutoyo Model 126-137 0"- 1" Thread Pitch Micrometer
- starrett 436 micrometers 2”-6” Ratchet Type - starrett 436 micrometers 2”-6” Ratchet Type. Good working condition normal paint wear due to usage.
- 468-271 Digimatic Holtest LCD inside Micrometer, Three-Point, 2.5-3"/63.5-76.2Mm - Range 2.5-3"/63.5-76.2mm. Part Number 468-271. We do not accept P.O. Boxes. We're happy to help. Weight: 0.16 oz. Item model number 468-271.
- Aerospace Micrometer 0-1" .0001" carbide tip
- 4~Vintage J.T. Slocomb Co. and Brown and Sharpe Micrometer's~GRAND PAP RETIRED~
- Central Tool Company micrometers lot of 2 antique made in USA - Central Tool Company micrometers lot of 2 antique made in USA.
- M W 4 Inch micrometer Kit In box - M W 4 Inch micrometer Kit In box.
- Mitutoyo 193-901 Digit Outside Micrometers, Ratchet Stop, 0-75mm Range, 0.0001" - Mitutoyo 193-901 Digit Outside Micrometers, Ratchet Stop, 0-75mm Range, 0.0001".
- spi 0-1 caliper and micrometer caliper set w box ruler and wrench - spi 0-1 caliper and micrometer caliper set w box ruler and wrench.
- Starrett 436P-3 Outside Micrometer 2"-3" Range .001" Grads
- Starrett Stainless Steel Micrometer Head - 1" Range - .001" Grads
- Starrett No. 436P-9 Outside Micrometer 8" - 9" - .001" Grads - USA
- Lot of Starrett 436RL-1 & 436RL-2 Outside Micrometers 0"-2" Range, 0.001" Grads
- Starrett 445AZ-3RL Depth Micrometer, 0-3" Range, .001" Graduation w/Case
- Starrett 436P-3 Outside Micrometer 2"-3" Range .001" Grads
- Starrett No. 449B-3R Blade Micrometer Set 0-3" with Original Wood Case - USA
- Brown & Sharpe No. 61 Outside Micrometer 1" - 2" .001" Graduations Calibrated
- Starrett 823AZ 823 Series 1-1/2" to 8" Tubular Inside Micrometer w/Case & Box
- Starrett 436RL-2 Outside Micrometer 1"-2" Range, 0.001" Grads
- Fowler 0 - 6" Depth Micrometer with 2.5" Base 52-225-020 w/Case - Japan
- Starrett T226XRL-3 Outside Micrometer 2-3" Range Carbide Tipped .0001"
- Starrett 436P-4 Outside Micrometer 3"-4" Range .001" Grads
- Starrett 449B-6P Depth Micrometer w/Non-Rotating Blade, 0"-6" Range, 4" Base - Starrett 449B-6P Depth Micrometer with Non-Rotating Blade, 0-6" Range, 4" Base, .001" Grads
- 1.8 - 2.00 Intrimike Etalon - 1.8 - 2.00 Intrimike. See photos for cosmetic marks, works well
- KEYENCE LS-3060R Laser Receiver Sensor Head for LS-3100 Scaning Micrometer
- KEYENCE LS-3060T Laser Transmitter Sensor Head for LS-3100 Scaning Micrometer
- Vintage Craftsman Outside Micrometer - Made in USA NICE!
- Brown & Sharpe 8-9" Outside Micrometer - Brown & Sharpe 8-9" Outside Micrometer.
- 🇺🇸Brown & Sharpe No. 104 Outside Micrometer 1"- 2" .001" Graduations - 🇺🇸Brown & Sharpe No. 104 Outside Micrometer 2"- 3" .001" Graduations. In Very Good Condition was taken really good care of. Retired now and don’t need anymore, would make an excellent tool for someone coming into the trade.Missing fine adjustment knob, but everything else works as described.Shipping USPS Priority Service with Tracking and Insurance
- Starrett 823B (1.5-12”) Tubular Inside Micrometer - Set is complete with the exception being the small wrench. Set is used and case is rough, but mic works fine. Put it back to work.
- 🇺🇸Brown & Sharpe No. 102 Outside Micrometer 1"- 2" .001" Graduations - 🇺🇸Brown & Sharpe No. 102 Outside Micrometer 1"- 2" .001" Graduations. In Very Good Condition was taken really good care of. Retired now and don’t need anymore, would make an excellent tool for someone coming into the trade.Shipping USPS Priority Service with Tracking and Insurance
- 🇺🇸Browne & Sharpe 3” Deep Throat micrometer 0-1” .001” With Original Case - 🇺🇸Browne & Sharpe 3” Deep Throat micrometer 0-1” .001” With Original Case. In Beautiful Condition, they don’t make them like this anymore. You can feel the Quality when you pick it up.Shipping USPS Priority Service with Tracking and Insurance
- Vintage Starrett Micrometer Caliper No. 436 1 Inch w/ Box - Vintage Starrett Micrometer Caliper No. 436 1 Inch w/ Box.
- Mitutoyo Solar digital calipers 500-455 CD-S20CT - Mitutoyo vernier caliper CD-S20CT.
- Outside Micrometers Measuring Tools Caliper Thickness Gauge Micrometer 4pcs/set - Relax to the right and lock to the left. Accuracy: 0.01mm/ 0-0.0004". Due to light and screen difference, the item's color may be slightly different from the pictures. Range: 0-100mm/ 0-0.4". Our warehouse is located in US.
- USED Mitutoyo 129-153 Interchangeable Rod Depth Micrometer Gauge 0 - 300mm - USED Mitutoyo 129-153 Interchangeabl.
- Mitutoyo 192-659-10 LCD Digimatic Height Gauge 0-300mm Range 0.01mm-0.005mm NEW
- Nos New Mitutoyo 505-646-50 Caliper Dial 0-150Mm
- Used Mitutoyo Gage Block Set 516-964 - Cert., ISO47 Blocks, Grade 2, Steel.
- NOS NEW Mitutoyo Dial Indicator 2046FE Grad .01mm CARBID TIP
- NOS NEW Mitutoyo DIAL 2410-10 0-.250" in orignal Box
- 0-1" Tubing Micrometer/Tube Mircrometer 0-1"/0.0001" Carbide Tipped Spherical... - Accuracy: 0.00024""/0.006mm.
- E&k Inside Micrometer Set 50-1000×0.01mm 7090119 - 50-1000×0.01mm. We are here to help and will do our best to resolve any issues.
- 3203-66A INSIZE Outside Micrometer 0-6" Set, .0001" Grads - 3203-66A INSIZE Outside Micrometer 0-6" Set, .0001" Grads.
- Starrett 799 12/300 Electronic Digital Caliper - Starrett 799 12/300 Electronic Digital Caliper. Needs new battery
- Starrett No. 823 Inside Micrometer Set 1/2" - 4". & Original Starrett Hard Cas - STARRETT NO. 823 INSIDE MICROMETER SET 1/2" - 4". & ORIGINAL STARRETT HARD CASE Missing the small wrench
- Machinist Tools Mitutoyo Depth Micrometer Set, Half Base, DMC 2.4-6" No. 129-332 - Machinist Tools Mitutoyo Depth Micrometer Set, Half Base, DMC 2.4-6" No. 129-332.
- Vintage Etalon 1" thru 2" micrometer - Rolle Switzerland - With Wooden Case - Vintage Etalon 1" thru 2" micrometer - Rolle Switzerland - With Wooden Case.
- LOT OF 3 micrometers: mitutoyo 3-4" 103-218 & 2-3" 103-217 & NSK 1-2" outside
- Mitutoyo 293-185-30 Electronic Digital Micrometer Quantumike - Mitutoyo 293-185-30 Electronic Digital Micrometer Quantumike.
- Etalon 23C 0-1” inch Outside Micrometer ALINA Made In Switzerland w/ Box Case - Etalon 23C 0-1” inch Outside Micrometer ALINA Made In Switzerland w/ Box Case.
- Mitutoyo 293-723-10 Digital Micrometer, 2-3" Range .00005"-.001mm - Includes tool shown.
- Cock & Kolb (2x) Load Cell 0 - 6 Kn - Hahn & Kolb (2x) load cell 0 - 6 kN Hahn & Kolb (2x) load cell 0 - 6 kN Brand: HAHN+KOLB Model: EAN: Internal ArtNr: 1234587426 Description 2 Hahn & Kolb load cells Measuring range: 0-6kN Technical specifications Similar articles Promat TREND trolley tool trolley workshop trolley 6 drawers empty powered by plentymarkets.
- 0-25mm Range Round Needle Type Thread Micrometer for Head Measurement Measure To - Needle type: Round. Range: 0-25mm.
- Brown and Sharp 1-2 in micrometer .001'' resolution - very nice little micrometer
- Starret 1-2 inch micrometer #436 - Nice clean little micrometer works great
- Starrett 2-3 inch micrometer - Great Mic in very good shape!
- Mitutoyo 0-6" Assorted Micrometer Set 0.0001" With Standards And Box Japan VTG
- Starrett Precision Inside Micrometer Set 2" To 12" Range .001" Grads + Case - .001" Grads. 1/2" Head Range. 2" to 12" Range. Includes Case.
- Lufkin Depth Micrometer 3" Base Length 0-3" Range + Case - 3" Base Length 0-3" Range. Includes Case.
- Craftsman Inside Micrometer Set 2" To 12" Range .001" Grads + Case - .001" Grads. 1/2" Head Range. 2" to 12" Range. Includes Case.
- Starrett Precision No. 448 Vernier Depth Gage 6" & 12" Rules 2-3/4" Blade - Precision Vernier Depth Gage. Model No. 448. 2-3/4" Blade Length. 6" & 12" Rules. Nice clean condition but is missing the very small fine adjust nut. Otherwise nice clean condition. No Reserve!
- TWO VINTAGE 0-1" MICROMETER MICROMETERS, One For You And One For A Friend. - TWO VINTAGE 0-1" MICROMETER MICROMETERS, One For You And One For A Friend..(B35-3)
- Mitutoyo Outside Micrometer, 0"-1/2", .0001", Spindle Lock, Carbide Tips - Mitutoyo Outside Micrometer, 0"-1/2", .0001", Spindle Lock, Carbide Tips. Nice working condition pocket micrometer from Mitutoyo. Measures from 0" - 0.5" with 4 digits of resolution (.0001"). The reference surfaces are carbide (you can see the color change in the photos) and they are in good condition. The spindle lock works well. There is no ratchet function on this tool. I have not calibrated this, but it appears to be well adjusted. Other than some surface staining and engraved names, it is in great shape and works well.
- NSK Japan Micrometer- Dial Indicator - Great condition, aside from some minimal surface rust on the holding beams.
- Starrett T436XRL Outside Micrometer Set, 0-12" Range, .0001" Graduation - Graduation0001". Ring-type knurled lock nut for quick and sure locking. This item is professionally inspected and verified by our.
- Classic Starrett 216 XFL-1 Digital Micrometer, Carbide Tip .001 - Good used condition. Found in an old tool box I purchased. Please check the pic's. 48 US only.
- Micrometer And SPI Protractor - Micrometer And SPI Protractor. Comes with both tools pictured.Maker mark on SPI protractor. Micrometer is in calibrated, working condition.Micrometer is 0-1”
- Vintage Helios 0-1" Outside Diameter Micrometer - Made In Germany - Vintage Helios 0-1" Outside Diameter Micrometer - Made In GermanyLot of 2 itemsNeeds a cleaning Both workSome wearSee pictures Feel free to ask questions Check out my other listings I combine shipping
- Tesa Disk Micrometer Swiss Made 0-1 Inch - TESA DISK MICROMETER SWISS MADE 0-1 INCH. The reason I'm calling this for parts or repair is because the one lever on the side that goes 1 3 4 is loose and the black plastic has a crack at the one screw.
- Mitutoyo Inside Diameter Measuring Instruments 0.01mm 145-192 IMP-200 175-200 - I wish you a wonderful encounter.
- Mitutoyo U shaped Steel Plate Micrometer PMU150-25MJ 385-291 Tasted Used - ●Minimum display (mm): 0.001.
- Mitutoyo 7309 Pocket Gauge Analog Micrometer 0.01mm Measuring Instrument as is
- Digital Micrometer 0-4 - Digital Micrometer 0-4.
- Vintage 1"-2" Micrometer KLI 0.001 IN N-10896 With Ratchet and Wood Box
- Starrett 749.1BZ-6RL Electronic Micrometer Depth Gage - Starrett 749.1BZ-6RL. Electronic Micrometer Depth GageSpecificationsThimble Type RatchetMeasuring Face Material SteelCalibrated NoAccuracy 0.0020 mm; ?.0001 in; 2.00 ?mBattery Size CR2032Base Length 4.0 mm; 4.0 inData Output YesWater Resistance Rating NoneBrand new just opened and put the batteries in it.
- Vintage Starrett Micrometer 0-1" T230FL Original Box,Tool, Paperwork - Vintage Starrett Micrometer 0-1" T230FL Original Box,Tool, Paperwork. Overall the micrometer is in good shape with some minor tarnish towards the end of the handle. The box is in ok shape and has been beat up due to storage. Please look at the pictures carefully prior to purchase as well as reach out with any questions you may have.
- Mitutoyo 293-340-30CAL Digimatic Micrometer with Calibration, 1" NO-SPC... - This gauge is Ingress Protection certified IP65 for protection against dust and water. What's in the Box?. Ingress Protection certified IP65 for protection against dust and water. All accessories will be included.
- Tumico Tubular Micrometer Co St. James Minn., box, with papers - You are bidding on a Tumico Tubular Micrometer Co St. James Minn., box, with papers. It is in used condition in the box, please see pictures.
- Lufkin 1" Micrometer Standard - AS SHOWN
- Digital Micrometer 0-4 - Digital Micrometer 0-4.
- Brown & Sharpe 1" Micrometer Standard - AS SHOWN
- L.S. Starrett 449 Blade Depth Micrometer handle only no rods - Barrel twists easily.
- Dasqua 4111-8105 0-25mm Outside Micrometer - • With ratchet stop for constant force(5- 8N 20% better than the normal standard of 5-10N), protect your high-precision device more carefully. Graduation: ±0.01 mm / 0.0004’’. Accuracy: 0.004 mm / 0.0001575’’.
- Mitutoyo 103-217 2-3" .0001"Grade Ratchet Stop Outside Micrometer w/ Case - Good condition. This is an estate find, and sold as is.
- Vintage Starrett Inside Micrometer Set 2"-12" in Wood Box **Missing .500 Sleeve* - Vintage Starrett Inside Micrometer 2" to 12" in Wood Box. A bit rough but still functional. One rod is a different style
- Mitutoyo Omst-150 (C18004626) - MITUTOYO OMST-150. Things I Buy.
- Vintage Mitutoyo 101-117 M225 0-1" Outside Micrometer in Case / Box Japan Made - Has some minor signs of wear and some engraving. Please see pictures for condition.
- Vintage Starrett 1” Micrometer Tool No. 230RL W/ Original Box - This looks to be in great condition and comes with original box. Please review all photos closely for condition as they are considered part of the description. Feel free to contact me with any questions and take a peek at my other listings. All of my items are sold as is with no returns so please contact me prior to bidding if you have any hesitations. Tax is charged when applicable. Thank you.Inventory #22
- Starrett 205 Steel Mill Micrometer 0-1" Range, Lock Nut IN STOCK. - Great little mic in great condition.
- Starrett 931 Wood Case Only for 216Z-8 / 436Z-8 Micrometer VINTAGE CASE!!
- USED Mitutoyo 516-968 GAGE BLOCK SET STEEL METRIC FINAL SIZE SET
- USED Mitutoyo 155-905 8 - 150mm Metric Telescopic Gauge Set 6
- USED MITUTOYO 505-646-50 150mm DIAL CALIPER Tool MADE IN JAPAN .001" w
- The L.S. Starrett Co. No. 230-M Metric 0-25mm Outside Micrometer Satin Chrome - The L.S. Starrett Co. No. 230-M Metric 0-25mm Outside Micrometer Satin Chrome.
- NOS NEW mitutoyo digital micrometer 2293-622 MDC-50/2"M 0-25MM
- Starrett Micrometer Caliper No. 224 Set A 2" to 6" in Box - FREE SHIPPING - Starrett Micrometer Caliper No. 224 Set A 2" to 6" in Box - FREE SHIPPING. Comes as shown, may have to be tuned up. Case has some scratching. Please see pictures for condition.. Comes with parts as shown in case.
- Starrett 1-2" No. 220AFL-2 Mul-T-Anvil Micrometer W/ Anvil & Wrench - Starrett 1-2" No. 220AFL-2 Mul-T-Anvil Micrometer W/ Anvil & Wrench.
- Old Starrett Micrometer Wood Box Sliding Lid Collectible - Old Starrett Micrometer Wood Box Sliding Lid Collectible.
- Brown & Sharpe Usa .0001" Straight Line Micrometer 5-6", Spindle Lock, Nice!!! - BROWN & SHARPE USA .0001" STRAIGHT LINE MICROMETER 5-6", SPINDLE LOCK, NICE!!! EXCELLENT CONDITION. VERY LIGHTLY USED. HAS POM. PLEASE SEE PHOTOS FOR EXACT ITEM AND CONDITION.
- Mitutoyo 0-4 Depth Micrometer Set 4" Base - Mitutoyo 0-4 Depth Micrometer Set 4" Base.
- Mitutoyo 15Deg. Point Micrometer 112-178 - Mitutoyo 15Deg. Point Micrometer 112-178.
- Starrett 2-3" 486P-3 Blade Micrometer .001" - Starrett 2-3" 486P-3 Blade Micrometer .001".
- Mitutoyo Micrometer Standard 36" - Length: 36″. Flatness.000012″/.0003mm.
- Vis 0-1" Thread Pitch Micrometer W/ 6 Anvil Sets - VIS 0-1" THREAD PITCH MICROMETER W/ 6 ANVIL SETS.
- Vintage Starrett 239 4-5" Micrometer Nice Heavy Duty In Original Case - Vintage Starrett 239 4-5" Micrometer Nice Heavy Duty In Original Case. May need some tuning. May have normal stuff since scratches from use.
- Mitutoyo 103-218 3-4" Mechanical Outside Micrometer - Blue - Mitutoyo 103-218 3-4" Mechanical Outside Micrometer - Blue.
- Mitutoyo No. 122-103 50-75mm 0.01mm Blade Micrometer - Mitutoyo No. 122-103 50-75mm 0.01mm Blade Micrometer.
- Mitutoyo 103-217 Micrometer - Mitutoyo 103-217 Micrometer.
- Mitutoyo 1-2" Outside Micrometer (103-136) - Mitutoyo 1-2" Outside Micrometer (103-136).
- Mitutoyo 114-102 V Anvil Micrometer 10-25mm 0.01mm W/Case - Mitutoyo 114-102 V Anvil Micrometer 10-25mm 0.01mm W/Case.
- Vintage NSK 2-3" & 1-2” Micrometer Set Made in Japan Machinist Tool - Vintage NSK 2-3" & 1-2” Micrometer Set Made in Japan Machinist Tool. Shows some wear from useSee pictures for condition. If you need more pictures or have any questions please feel free to email me. Thank you and please check out my other auctions and Ebay where we sell a wide range of collectibles including:• New & Vintage LEGO building sets• Sports & trading card singles, packs and graded cards. • Vintage books and High School Yearbooks• New & Vintage action figures • Antique photos & negatives• and MORE!
- Mitutoyo Outside Groove Micrometer No. 146-102 - 0.000” TO 1.000”
- Mitutoyo 293-336-30 electronic mircometer 1-2"
- Mitutoyo No. 102-218 25-50mm 0.001mm M310-50 - Mitutoyo No. 102-218 25-50mm 0.001mm M310-50.
- Omega DP-F76 Frequency Input Ratemeter/Totalizer, 6 Digits Displa 9101 - Manufacturer Part Number: DP-F76. The product images shown are of the exact product you will receive.
- Cen-Tech 0-4" Depth Microm 0.001" Graduation With Case & Extras - 0.001" Graduation. With Case & Extras. 0-4" Range. The item is exactly as pictured. Model: N/A.
- Mitutoyo digimatic micrometer 0-1" 293-185-30 coolant proof
- NEWPORT SM-06 VERNIER MICROMETER 6 mm UNTHREADED VERNIER - Three shown, price is per the unit. A signed credit card authorization form is required for all orders paid with credit card. We directly accept US issued credit cards.
- HFS (R) Precision Micrometer Holder Stand Base
- Vintage L. S. Starrett Co Micrometer No. 3 Precision Machinist Tool - Vintage L. S. Starrett Co Machinist Micrometer No. 3. See pictures for condition. If you need more pictures or have any questions please feel free to email me. Thank you and please check out my other auctions and Ebay where we sell a wide range of collectibles including:• New & Vintage LEGO building sets• Sports & trading card singles, packs and graded cards. • Vintage books and High School Yearbooks• New & Vintage action figures • Antique photos & negatives• and MORE!
- Scherr Tumico 36" - 42" Outside Micrometer Set with Standards and Wooden Case - Ratchet Thimble. Anvil Lock.
- 1 Fowler Outside Blade Mic Micrometer, 1-2" .001" Graduation Japan,tool - Fine shape,lite dirt. See pics for condition.
- 1 Excellent Fowler Rolling Digital Counter Point Micrometer, 0-1" ,tool - Excellent shape,looks used once or twice and put away. See pics for condition.
- Micrometer Knob Sliding Table Manual XY Axes Guide Linear Slide Stage - Feature: 1. Straightness 3μm, parallelism 20μm, up and down swing 25 seconds, left and right swing 15 seconds. Item Type: Sliding Table. Sliding Table: Approx. 40 x 40mm / 1.6 x 1.6in. Up and Down Swing: 2.0N·m.
- mitutoyo micrometer - mitutoyo micrometer. Works well! Comes with case and instructions
- Hella 7.00468.03.0 - 1Ea - HELLA 7.00468.03.0 - 1EA. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Hella 7.00468.11.0 - 1Ea - HELLA 7.00468.11.0 - 1EA. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Hella 7.00468.75.0 - 1Ea - HELLA 7.00468.75.0 - 1EA. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Hella 7.00468.72.0 - 1Ea - HELLA 7.00468.72.0 - 1EA. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Hella 7.00468.56.0 - 1Ea - HELLA 7.00468.56.0 - 1EA. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Hella 7.00468.42.0 - 1Ea - HELLA 7.00468.42.0 - 1EA. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Hella 7.00468.39.0 - 1Ea - HELLA 7.00468.39.0 - 1EA. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Hella 7.00468.38.0 - 1Ea - HELLA 7.00468.38.0 - 1EA. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Hella 7.00468.27.0 - 1Ea - HELLA 7.00468.27.0 - 1EA. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- Hella 7.00468.24.0 - 1Ea - HELLA 7.00468.24.0 - 1EA. WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer.
- STARRETT 3 PIECE SET OF NO. 436 1-3” OUTSIDE MICROMETER W/ Case - STARRETT 3 PIECE SET OF NO. 436 1-3” OUTSIDE MICROMETER W/ Case. 1-3” as you can see it’s missing the 3-4” Includes Scarrett case Tools are etched with owners name Please see all pics What you see is what you get Please message with any questions
- JT Slocomb Co 2" - 3" Range Mechanical Outside Micrometer Black Made in USA - JT Slocomb Co 2" - 3" Range Mechanical Outside Micrometer Black Made in USA.
- NSK 12" Inside Micrometer .001" No. 704-402 PO2-1 - NSK 12" Inside Micrometer .001" No. 704-402 PO2-1.
- MITUTOYO 345-251-30 Micrometer Caliper Inside 25 mm-50 mm IMP-50MX
- Mitutoyo 293-250-30 Coolant Proof Digimatic Micrometer 100-125 mm MDC-125MX
- Mitutoyo 293-251-30 Coolant Proof Digimatic Micrometer 125-150 mm MDC-150MX
- 2" - 11" ASSORTED OUTSIDE MICROMETERS - 12 Micrometers - ASSORTED MFG. MITUTOYO, B & S. we can either use your account number or provide a rate quote. We can provide freight quotes.
- INSIZE 6311-1 Micrometer Setting Standard, 1"
- Starrett No. 226 2-3" Micrometer .001" Made In USA Machinist Precision Tool
- Mitutoyo 293-330-30 Coolant Proof IP65 Micrometer, 0-1" (0-25.4mm), SPC Output - Dust/water protection level IP65 (IEC60529) 2. Coolant Proof. Resolution. 00005"/0.001mm. Range 0 - 3" / 0 - 76.2mm (3 pcs. Local pick up is not available. Plastic Fitted Case. Model: 293-330-30. Instruction Manual. ).
- Vintage Starrett 4" - 5" Micrometer No. 436 Made in USA
- Carlson Tool & Machine Co. Outside Micrometers. ½’’ - Carlson Tool & Machine Co. Condition: light wear. Overall in good shape.
- Starrett 436.1Rl-4 3-4'' Outside Micrometer (Eb73) - PUERTO RICO,ALASKA,HAWAII.
- Starrett 436.1Rl-3 2-3'' Outside Micrometer (Eb73) - PUERTO RICO,ALASKA,HAWAII. "MISSING WRENCH".
- Mitutoyo caliper inside micrometer Japan
- Starrett 436.1Rl-2 1-2'' Outside Micrometer (Eb73) - PUERTO RICO,ALASKA,HAWAII. "MISSING WRENCH".
- RCBS Electronic Digital Micrometer - 1" (87320)
- Starrett 436.1Rl-1 0-1'' Outside Micrometer (Eb73) - PUERTO RICO,ALASKA,HAWAII.
- Mitutoyo 1-2" Interchangeable Anvil Micrometer (117-108) - Mitutoyo 1-2" Interchangeable Anvil Micrometer (117-108).
- Micrometer mitutoyo Japan
- Starrett APT436.1XRL-2 Micrometer, American Pride Carbide .0001 Machinist Tools - LISTED IS A NEW STARRETT APT436.1XRL-2 MICROMETER. THIS IS A 1"-2" WITH CARBIDE TIPS AND .0001 RESOLUTION. COMES AS SHOWN IN CASE WITH WRENCH AND PAPERS. 2 SHIPPING SPEEDS TO CHOOSE FROM. BE SURE TO CHECK OUT MY OTHER ITEMS.
- Starrett Micrometer 51796 436Rl-11
- Mitutoyo Micrometer No.101-104 M210-50 Japan
- Starrett 1-2" 486 Blade Groove Outside Micrometer .001" Machinist Tool Maker - Starrett 1-2" 486 Blade Groove Outside Micrometer .001" Machinist Tool Maker.
- Mitutoyo BMD-25MX 395-271-30 Spherical Micrometer Measuring Range: 0-25mm - Battery Life (Normal Usage): 2.4 years. - Minimum Display Unit (mm): 0.001. - Power Source (Battery Specification): SR44 Silver Oxide Button Cell Battery.
- Mitutoyo 122-126 1" -2" Blade Micrometer .0001" reading - Mitutoyo 122-126 1" -2" Blade Micrometer .0001" reading Has number etched on barrel Smooth Operation Comes as shown
- Starrett No 486 Blade Micrometer 0-1" - Starrett No 486 Blade Micrometer 0-1" Smooth Operation Comes as shown
- Mitutoyo used micrometer 100-125mm reference gauge wrench for adjustment Japan
- 2pc Linear and NCK 3/8 - 1-3/8" Inside Micrometer bore Groove Gage .001 reading - 2pc Linear and N.C.K 3/8 - 1-3/8" Inside Micrometer bore Groove Gage Calipers .001" reading in Case as Shown
- Starrett No 436 2" - 3" Outside Micrometer .001 Graduation - Starrett No 436 2" - 3" Outside Micrometer .001 Graduation.
- Intertest 51 .2-.6" Inside Micrometer Groove Gage .0005" Reading w Wooden Case - Intertest 51 .2-.6" Inside Micrometer Groove Gage .0005" Reading with Generic Wooden Case. Functions smoothly and returns but needs calibration as it is not reading properly. Has Letters NT Etched on Back Comes as Shown
- Brown and Sharpe Micrometer Model 270 Depth Size 3-3 1/2"
- mitutoyo micrometer - mitutoyo micrometer. 19-20 with case
- Mitutoyo 103-143-10 Outside Micrometer 150-175mm - Looking for a reliable and accurate outside micrometer for your metalworking inspection and measurement needs? Check out this Mitutoyo 103-143-10 model, designed for measurements between 150-175mm. It's made by a trusted brand, Mitutoyo, and features a range of user-friendly features for easy and precise measurements. With a focus on quality and functionality, this outside micrometer is a must-have for any metalworking professional. Its MPN number is 103-143-10, so you can be sure you're getting the exact model you need. Don't miss out on this essential tool – order yours today!
- mitutoyo micrometer - mitutoyo micrometer. 18-19 with case
- mitutoyo micrometer - mitutoyo micrometer. 17-18 with case
- Mitutoyo 152-388 MHG1-2" W2 Micrometer Head 0-2" .0001" New Old Stock - In New condition never used. Box may show signs of shelf ware, but item itself is never used.
- Mitutoyo Micrometer Mitutoyo Japan - Mitutoyo BMD-25 Both Spherical Micro 115-215.
- Micrometers - Micrometers. 2 sets with cases
- Mitutoyo Mitutoyo 200mm standard vernier calipers Japan
- MITUTOYO Mitutoyo Digimatic Hall Test HTD-25R 20-25mm 3-Point/3-Point Japan
- Thread Micrometer Head Measurement Flats Type Measure Tool 0-13mm Scopes - Note: The color of the item may vary slightly due to photography and your own computer Feature: Suitable For: Optical instrumentation platform displacement amount of the fine adjustment. For XY table suitable for fine adjustment of a variety of precision instruments, and measuring equipment. LCD production and testing equipment. The liquid crystal prism camera positioning and loading. An optical fiber positioning, optical communication system products and testing equipment. The semiconductor manufacturing equipment and inspection associated evaluation device..
- Mitutoyo digital caliper 200mm CD-20AX Mitutoyo measuring instrument micro Japan
- Mitutoyo Mitutoyo digital caliper CD-S10C solar power supply Japan
- Links Brand 2-3" Inch Micrometer .0001" precision - Links Brand 2-3" Inch Micrometer .0001" precision. Very good condition with Case. See photos for more details as they are part of the description. See our ebay auctions for more items like this and other good deals
- Insize 6-12" Digital Micrometer Set - Insize 6-12" Digital Micrometer Set Bought for a job and got ghosted. Thought I would use it and never have. Bran new, case is dirty on the outside.
- E.j. Cady Automatic Micrometer Half Thousandth Of An Inch (Read Description) - E.J. CADY AUTOMATIC MICROMETER HALF THOUSANDTH OF AN INCH (READ DESCRIPTION). Appears to be in good working condition except THAT THERE IS NO GLASS DIAL FACE! Otherwise I can’t find any problems appears to operate smoothly you are buying as is. Shipping is a little higher to protect the valuable mechanism.
- MITUTOYO Outside Micrometer 103-150 OM-350 325-350mm 0.01mm Box HM23 - It is zero point aligned. The wooden box is big. As you can see in the video. Can not be bundled with other products. If the world is in pandemic chaos, it will take about one week to two months. (Depending on the situation, it may take longer for the product to arrive.).
- MITUTOYO Outside Micrometer 103-149 OM-325 300-325mm 0.01mm Box HM22 - It is zero point aligned. The wooden box is big. As you can see in the video. Can not be bundled with other products. If the world is in pandemic chaos, it will take about one week to two months. (Depending on the situation, it may take longer for the product to arrive.).
- Mitutoyo cylinder gauge 511-128 50-100mm - About Importer's Obligation.
- 0-25mm Metal Thread Micrometer Head Flat Head Precision Measure Tool - Note: The color of the item may vary slightly due to photography and your own computer Feature: Suitable For: 1.Optical instrumentation platform displacement amount of the fine adjustment 2.For XY table suitable for fine adjustment of a variety of precision instruments, and measuring equipment 3.LCD production and testing equipment The liquid crystal prism camera positioning and loading. 5.An optical fiber positioning, optical communication system products and testing equipment. 6.The semiconductor manufacturing equipment and inspection associated evaluation device..
- MITUTOYO Outside Micrometer 103-152 OM-400 375-400mm 0.01mm Box HM21 - It is zero point aligned. The wooden box is big. As you can see in the video. Can not be bundled with other products. If the world is in pandemic chaos, it will take about one week to two months. (Depending on the situation, it may take longer for the product to arrive.).
- MITUTOYO Outside Micrometer 103-153 OM-425 400-425mm 0.01mm Box HM20 - It is zero point aligned. The wooden box is big. As you can see in the video. Can not be bundled with other products. If the world is in pandemic chaos, it will take about one week to two months. (Depending on the situation, it may take longer for the product to arrive.).
- Starrett Outside Micrometer 0-1” Made In USA Model No. 436-1 in. Vintage Tool - Starrett Outside Micrometer 0-1” Made In USA Model No. 436-1 in. Vintage Tool.
- Chrome Plated Gauge Measuring Tools Digital Outside Micrometer Caliper 0-25 mm - Auto search for maximum and minimum values. Origin resetting. You may also like. Batteries not included. Extra Large LCD Screen and High accuracy. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
- 5/16''- 6" Precision Telescopic Gauge Micrometer Bore Measurement Tool Set 6Pcs - Quantity: 6pcs. Precision: 0.01. Size: 20 x 16 cm. Size A: 5/16"-1/2" (8mm to 12.7cm). Size B: 1/2"- 3/4" (12.7mm to 19mm). Color: Silver. Durable and long service life.
- MITUTOYO Outside Micrometer 103-154 OM-450 425-450mm 0.01mm Box HM19 - It is zero point aligned. The wooden box is big. As you can see in the video. Can not be bundled with other products. If the world is in pandemic chaos, it will take about one week to two months. (Depending on the situation, it may take longer for the product to arrive.).
- Mitutoyo Digital Micrometer MDC-25MJ Japan
- 1PC dial indicator TM-35-02D - Quantity: 1PC.
- Mitutoyo mitutoyo digital calipers Japan - Mitutoyo ABS Digimatic caliper CD-30AX/digital calipers. Beauty products.
- Mitutoyo vernier caliper good condition 300mm made by Mitutoyo Japan
- MITUTOYO Mitutoyo Mitutoyo Micrometer Micrometer 25-50mm 0.01mm Japan
- MITUTOYO Outside Micrometer 103-155 OM-475M 450-475mm 0.01mm Box HM18 - It is zero point aligned. Function: Two LR44s are required. The wooden box is big. As you can see in the video. Can not be bundled with other products. If the world is in pandemic chaos, it will take about one week to two months.
- Mitutoyo 293-340-30CAL Digimatic Micrometer with Calibration, 1" NO-SPC... - Manufacturer : Mitutoyo. Ingress Protection certified IP65 for protection against dust and water. Is Discontinued By Manufacturer : No.
- Micrometer Mitutoyo Japan
- Steel LCD display 0-150mm 6" Digital Depth Gauge Micrometer Vernier Caliper - Product: Digital Depth Gauge. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Material: Stainless steel. Range: 0-150mm.
- MITUTOYO Digimatic Outside Micrometer 293-574 MDC-400M 375-400mm Box HM17 - Wood Box 74x43x6cm. The wooden box is big. As you can see in the video. Can not be bundled with other products. Nothing is difficult. Don't worry. The lock lever is also smooth. A signature is required to receive the item.
- MITUTOYO Digimatic Outside Micrometer 293-575 MDC-425M 400-425mm Box HM16 - Wood Box 74x43x6cm. The wooden box is big. As you can see in the video. Can not be bundled with other products. Nothing is difficult. Don't worry. A signature is required to receive the item. Both locks are normal.
- MITUTOYO Digimatic Outside Micrometer 293-576 MDC-450M 425-450mm Box HM15 - Wood Box 74x43x6cm. The wooden box is big. As you can see in the video. Can not be bundled with other products. Nothing is difficult. Don't worry. It works properly. Answer .
- Starrett STR436M100 436.1MXRL-100 Outside Micrometer 75-100mm Graduation 0.01mm - Sadly instances of fraud are on the increase. The cost of fraud has to be passed on to all buyers in the form of higher costs. Because of this all reports of lost items are reported to Royal Mail who may contact you to confirm the circumstances of the loss. For your security and to minimise theft, where the item is valuable or you have a history of non-receipt we may also ask you to report the loss via eBay before we can action any replacement. The simplest and safest way for our customers to pay for items is through PayPal. This is the primary option on eBay and is the quickest way to complete postage. We do also accept credit and debit cards and you can contact us via the 'Business Details' section on eBay to complete payment. We do deal with direct Bank Transfers and you can contact us.
- Moore & Wright MAW890M 890M Fixed Type Depth Micrometer 0-25mm/0.01mm - Sadly instances of fraud are on the increase. The cost of fraud has to be passed on to all buyers in the form of higher costs. Because of this all reports of lost items are reported to Royal Mail who may contact you to confirm the circumstances of the loss. For your security and to minimise theft, where the item is valuable or you have a history of non-receipt we may also ask you to report the loss via eBay before we can action any replacement. The simplest and safest way for our customers to pay for items is through PayPal. This is the primary option on eBay and is the quickest way to complete postage. We do also accept credit and debit cards and you can contact us via the 'Business Details' section on eBay to complete payment. We do deal with direct Bank Transfers and you can contact us.
- Moore & Wright MAW901 901 Internal Micrometer 1 - Sadly instances of fraud are on the increase. The cost of fraud has to be passed on to all buyers in the form of higher costs. Because of this all reports of lost items are reported to Royal Mail who may contact you to confirm the circumstances of the loss. For your security and to minimise theft, where the item is valuable or you have a history of non-receipt we may also ask you to report the loss via eBay before we can action any replacement. The simplest and safest way for our customers to pay for items is through PayPal. This is the primary option on eBay and is the quickest way to complete postage. We do also accept credit and debit cards and you can contact us via the 'Business Details' section on eBay to complete payment. We do deal with direct Bank Transfers and you can contact us.
- Vintage Lufkin Micrometer Gage No. 513 - original wood box - 5 rods
- Outside Micrometer set 0-3" 0.0001" - Ratchet Thimble handle for precise application of force.
- Mitutoyo Depth Micrometer .001” 0-4” Range. Complete. - Mitutoyo Depth Micrometer .001” 0-4” Range. Complete with three small wrenches and five depth rods. In wonderful condition. Will pass calibration. Please see pictures.
- Craftsman Interchangeable Anvil Micrometer 0-4'' - There are no signs of use on any of the pieces in this set.
- Brown & Sharpe Depth Micrometer Set W/ Rods & Wooden Case - We're down to earth, easy to work with people. Model: Does Not Apply. PRODUCT INFORMATION Quality Products at Lowest Prices.
- STARRETT NO. 575 SCREW THREAD PITCH MICROMETER 20 -24 Pitch 0 -1" Range .001" - You will receive the exact item pictured in good used condition with engraving. 0.001" Graduations clearly visible and repeatable travel.
- Mitutoyo 295-314 Rolling Digital Tube Micrometer: 0 to 1", 0.0001" scale - Inner tube scale provides resolution to 0.0001". Zero point is accurate. There are three layers of foam in the case. The middle nesting layer is in excellent condition. The two outer padding layers are crumbled and will need to be replaced.
- Mitutoyo 2"-12" Micrometer Standard Set - I have a set of Mitutoyo Micrometer Standards from 1" to 12" The box is in relatively good condition. Missing from from top of the case. These are great for a home machinist. I have used these for my home shop for years.
- micrometer wrench for m8crometer - micrometer wrench for m8crometer.
- Mitutoyo 167-141 1" Micrometer Standard for Calibrating Outside Micrometer - Mitutoyo 167-141 1" Micrometer Standard for Calibrating Outside Micrometer.
- Vintage 1960s Starrett 0-3” Micrometer Depth Gage 440-3RL in Wood Case Orig Pkg - Vintage 1960s Starrett Micrometer Depth Gage 440-3RL. in original wooden box and sleeve.Excellent condition with original wooden box and cardboard packaging. The box measures 1.25" tall and 8" by 4.75" wide. Note that what you're looking at is the original tissue paper.
- Starrett 0-1 Micrometer New V230Mxfl Carbide Tip - WE DO COMBINE SHIPPING 120 DAY RETURN ON THIS ITEM
- Starrett No.213 Micrometer, 1"-2", .0001" Resolution, Ratchet And Lock - Starrett No.213 Micrometer, 1"-2", .0001" Resolution, Ratchet And Lock. Complete and fully functional Starrett 213 micrometer. Measures 1"-2" dimensions with 4 decimal places of accuracy. Has a ring style spindle lock and a ratchet, both of which work well. The piece needs cleaned up a bit, but is still a good usable tool. I have not personally calibrated this item.
- Mitutoyo 2" Flat End Micrometer Calibration Standard for Outside Micrometer - Mitutoyo 2" Flat End Micrometer Calibration Standard for Outside Micrometer.
- starrett vintage micrometer model no. 226 3"-4" - starrett vintage micrometer model no. 226 3"-4".
- Goodell Pratt 1218 Inside Micrometer Set - Up for sale is this Very Nice Goodell Pratt 1218 Inside Micrometer Set. Appears to be in excellent working condition. No Reserve. Satisfaction 100% Guaranteed.
- STARRETT Micrometer Adjustment Spanner Wrench, Fits: Mitutoyo, Lufkin, More, EC - STARRETT Micrometer Adjustment Spanner Wrench, Fits: Mitutoyo, Lufkin, More, EC.
- Brown & Sharpe blade micrometer 0-1 inch. - Made in the U.S.A. This gage is in very good condition.
- Mitutoyo Mechanical Internal Micrometer With Carbide Tip .001" - IT LOOKS LIKE NEW CONDITION IN THE ORIGINAL BOX. IT IS NOT MARKED WITH A NUMBER. CHECK ALL PICTURES FOR CONDITION.
- Starrett No. T463RL Micrometer Head - Starrett No. Head only.
- Mitutoyo 293-832-30 Digital Micrometer
- Mitutoyo 0-1 inch # 118-129 sheet metal micrometer - Up for bid, Mitutoyo 0-1 inch #118-129 sheet metal micrometer. Looks new but has a number etched on it. Good luck and happy bidding.
- LUFKIN Vintage # 1841 Micrometer, 0" - 1" x .001", Ratchet, Lock, Checks, EC, LN - No added scribes and finish that looks nearly factory new. OEM Box and inserts as pictured. Normal use and wear shows.
- Vintage Japan Micrometer NSK Dial Vernier Caliper 6” Original wooden Box - Vintage Japan Micrometer NSK Dial Vernier Caliper 6” Original wooden Box.
- Mitutoyo Micrometer Parts
- 5-30mm Internal Micrometer 0.01mm Stainless Steel Accurate Screw Gauge Metric - 5-30mm Internal Micrometer 0.01mm Stainless Steel Accurate Screw Gauge Metric5-30mm Internal Micrometer 0.01mm Stainless Steel Accurate Screw Gauge Metric Inner Diameter Measuring ToolFeatures:brand new and .Name: internal micrometerColor: silverMaterial: stainless steelMeasuring range: 5-30mmPrecision: 0.01 mmNote:Transition: 1cm=10mm=0.39inchPlease allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!Package Includes:1 × Inside Micrometer1 × Wrench1 × Calibration Ring1 × Packing Box
- 6pcs 5/16" - 6" Telescopic Gauge Set Micrometer T-Bore Measurement Tool Kit - Quantity: 6pcs. Size: 20 x 16 cm. Size A: 5/16"-1/2" (8mm to 12.7cm). Size B: 1/2"- 3/4" (12.7mm to 19mm). Color: Silver. Durable and long service life.
- Vintage Starrett No. 440 Depth Micrometer Set In Original Wooden Box - Estate find. Looks in good condition. Happy bidding Vintage Starrett No. 440 Depth Micrometer Set In Original Wooden Box.
- Allied International Outside Micrometer with Case 2-3" Range / .0001" Increments - Allied International Outside Micrometer with Case 2-3" Range / .0001" Increments. Very good condition with box. See photos for more details as they are part of the description. See our ebay auctions for more items like this and other good deals
- Starrett 124M Metric Inside Micrometer 50-200mm 6 Rods Case 0.01mm Grad NICE! - Excellent condition, as pictured. $12.50 for Priority Mail.
- VIS 1-2 Inch THREAD PITCH MICROMETER w/ ANVILS & STANDARD - Up for sale is a " VIS 1-2 Inch THREAD PITCH MICROMETER w/ ANVILS & STANDARD - .001 GRADUATIONS - MADE in POLAND " in excellent working condition, ANVIL SETS INCLUDED are: 4.5-3 TPI ~ 8-5 TPI ~ 13-9 TPI ~ 24-14 TPI & 44-28 TPI, no personal etchings-case has been relined, really clean useful used tool!(as shown in pictures) Please take a minute to look at our other items. No pickups or deliveries. Some tools may need re-calibrating. If something isn't in our description or pictured, you can assume it's not included! Good Buying!
- Mitutoyo Micrometer 4" Base .001" Depth Gauge - In good used condition. Appears to be missing parts. See pics for condition.
- Brown & Sharpe .0001" Micrometer 0 To 1 Inch Model 1 Calibrated - Brown & Sharpe .0001" Micrometer 0 To 1 Inch Model 1 Calibrated.
- MITUTOYO 293-332-30 Digital Micrometer,2-3In,0.00005,Ratchet - MITUTOYO 293-332-30 Digital Micrometer 2-3In 0.00005 Ratcheting. Micrometer is being sold as parts or repair only and needs calibration.
- Mitutoyo Holetest digital bore micrometer - Mitutoyo Holetest digital bore micrometer. Excellent condition, no markings. I cannot vouch for the calibration.
- Vintage Starrett 2” Micrometer T436FL Friction Thimble Lock Nut Wrench Manual - Vintage 1960s Starrett Micrometer T436FL Friction Thimble Lock Nut, instructions, wrench in original box
- Mitutoyo Mechanical ID Micrometer 4" to 52" Range - model 139-180 - Excellent condition.
- Starrett 0-1 Inch Micrometer. Brand New Never Used! Carbide Tip. - Starrett 0-1 Inch Micrometer. Brand New Never Used! Carbide Tip.. Brand new, never used.! If you have any questions please feel free to ask. ThanksHappy bidding!
- brown and sharpe micrometer 2-3 - brown and sharpe micrometer 2-3.
- brown and sharpe 0-1 micrometer 11A - brown and sharpe 0-1 micrometer 11A.
- Starrett T216XRL - 1-inch Digital Outside Micrometer w box - See photos.
- Mititoyo Holetest digital bore micrometer - Mititoyo Holetest digital bore micrometer. Excellent condition, no markings. I cannot attest to the calibration.
- Mitutoyo 103-132 Friction Thimble Outside Micrometer 1-2" .0001" carbide tips - .0001 graduation. Works at they should. Standard not included!
- NICE VINTAGE CRAFTSMAN TOOLS 0-4" OUTSIDE MICROMETER SET, .001", w/ CASE - Nice, older set here in original case. One latch on case wasn't closing, and I didn't want to force, maybe a slight bend would fix it. Stamped" Forged Steel" Has adjusting wrench, but no standards.
- Mitutoyo 0-6" .0001 Outside Micrometer Set With 0-1” Digital, Machinist Tool - Mitutoyo 0-6" .0001 Outside Micrometer Set With 0-1” Digital, Machinist Tool. Mitutoyo 293-348-30 Digital 0-1” Micrometer1-6” Mitutoyo .0001” Carbide Faced MicrometersOther listings available including several new Mitutoyo digital tools for significantly less than retail.Willing to discount the purchase of multiple items.Message me with any questions or requests
- Mitutoyo 103-262 Outside Micrometer 1-2", Range .0001" Vernier W/Case and Gage
- Fowler Multi-Anvil Uni Micrometer 0-1" 0.0001" Graduation - Good condition, showing light use.
- Spi - Swiss Precision Instruments Micrometer (B02009736) - Parts & Accessories Included 90% - Major Feature Parts or Accessories are included. Things I Buy.
- Starrett V-Anvil Micrometer No. 485 - Works Fine - Unique Anvils - name on tool
- Mitutoyo 329-350-10 Digital Depth Micrometer .00005" - MITUTOYO DIGITAL. IN GREAT USED SHAPE. Pictures are of the actual Item.
- Mitutoyo 0-25mm 0-1" Digital Outside Micrometer No.293-701 - MITUTOYO DIGITAL CALIPER. IN GOOD USED SHAPE. Pictures are of the actual Item.
- Lufkin 2-3 in. micrometer No. 1913 Black enamel frame Good working order.
- STARRETT #436 MICROMETERS 0-1 INCH .001 Graduation ratchet thimble good shape - Standard not included!
- Mitutoyo 331-361-30 SPM2-1" MX - Digimatic Micrometer -BRAND NEW - FREE SHIPPING
- Starrett 760FL Electronic Screw Thread Micrometer W Output EDP 64051 - Includes Original case and book manual. Has been pre-owned before but still in really good condition. Needs a new battery but has been tested and worked properly.
- Mitutoyo 101-106 Outside Micrometer, 1-2" Range, .001" Graduation
- HELIOS 6" Vernier Caliper Micrometer with Original Case Made in GERMANY - HELIOS 6" Vernier Caliper Micrometer with Original Case Made in GERMANY.
- LS Starrett Co Inside Micrometer With Case Athol Mass Vintage - I really don't know anything about it. Appears totally unused, but no box. I will make every effort to correct any concern or problem you may have. Add this to your collection, or ready to uses.
- MITUTOYO Digimatic Micrometer Digital Micrometers (0-25mm)
- Pratt & Whitney END MEASURES & MICROMETERS
- Central Tool Micrometer 5"-6"
- Starrett No 436 1" - 2" Outside Micrometer .0001 Graduation
- Mitutoyo 103-137 Outside Micrometer, 0-25mm Range, 0.01mm Gradation 0.002mm - 1. Vernier scale in metric units for taking accurate outside diameter (od) measurements. 3.Baked enamel finish for frame protection and durability. Four. Satin chrome finish on thimble and sleeve helps resist rust and reduce glare. 5. Carbide coating on shaft and anvil provides wear resistance. It has the following: FEATURES: Measurements: Carbide-tipped measuring faces ensure accurate measurements. Operation: Positive locking clamp ensures smooth operation of this micrometer. Design – The stainless steel design gives it an edge over other alternatives in this segment. Characteristics Product type : Outside micrometer Range (mm): 0-25 mm Resolution (mm): 0.01 mm Sub.
- Vintage Brown & Sharpe #17 Chrome Slant 0-1" Outside Micrometer w Box & Case-EXC - Has decimal equivalents on thimble. No owners markings. Made in USA.
- NEW! 5"-6" OUTSIDE MICROMETER w/ STANDARD, .0001" GRAD. - .0001" GRAD. INCLUDES STANDARD. NEVER USED CONDITION! WOODEN CASE.
- NEW! 2"-3" OUTSIDE MICROMETER w/ STANDARD, .0001" GRAD. - .0001" GRAD. INCLUDES STANDARD. NEVER USED CONDITION!
- 50-150x0.01mm Inside Micrometer Combining extension rods, Small Tube Type, (1E) - Combining extension rods. Extension rods = 13mm, 25mm, 50mm. N= Number of rods. Small Tube Type. Graduation = 0.01mm. Case = Includes a fitted plastic case. Dawsonville, GA 30534.
- MITUTOYO 0 - 1" OUTSIDE MICROMETER .0001" RANGE NO. 103-260 Made in Japan
- Starrett NO230 & No 2 & Woolworth Micrometers 3 piece set USA - The smaller one is a Woolworth 1/2".
- Millers Falls Inside Micrometer No 1218 Made In USA
- Vintage Millers Falls Co No 112 Micrometer Made in USA - Vintage Millers Falls Co No 112 Micrometer Made in USA.
- Fowler Outside Micrometer, 0-6" Range, .001" Graduation - Item looks very clean shows little if no use, as shown in pictures.
- Tubular Micrometer Co St. James Minn USA 2"-3"
- Vintage Starrett 4" - 5" Micrometer No. 436 Made in USA
- Mitutoyo Id Inside Micrometer Set Model No 141-133 Made In Japan
- Micrometer Set 0-6" and Telescoping Bore Gauge Cylinder Measurement - Fitted wood case included! Graduations: 0.0001" Laser Etched Graduations will never fade! Hard Shell Padded Case Included. Bore Gauge: 6 Pieces range: 5/16" - 6".
- MITUTOYO 111-166 Spline Micrometer 0-1" .0001” Machinist Tool - USED, MINT CONDITION.
- Mitutoyo 115-253 Micrometer 0-1" .0001" - USED, MINT CONDITION.
- Accusize Screw Thread Micrometer, Range of 1”-2” - Accusize Screw Thread Micrometer, Range of 1”-2”. - measures thread pitch diameter in inches - measurement range of 1” to 2” - accuracy of +/- .00016 - includes five anvil pairs for 3.5-4.5, 5-8, 9-13, 14-24 and 28-44 threads/inch - 60 degree anvils are hardened steel - model number S916-C751 - clean, undamaged, fully functional - used only once, no longer needed
- Mitutoyo Outside Micrometer 1-2", Range .0001" Vernier - USED, MINT CONDITION.
- MITUTOYO COMBIMIKE DIGIT MECHANICAL 0-1" 0 -25 mm 159-211 OUTSIDE MICROMETER - MITUTOYO COMBIMIKE DIGIT MECHANICAL 0-1" 0 -25 mm 159-211 OUTSIDE MICROMETER.
- Mitutoyo 103-262 Outside Micrometer 1-2", Range .0001" Vernier - USED, MINT CONDITION.
- Mitutoyo Tubular Inside Micrometer 4-20" Model 139-178 - MITUTOYO 139-178. Hollow, tubular extension pipes help provide light weight with rigidity. Features Interchangeable Extensions in a Hollow Pipe Design. Includes 1, 2, 4 & 8" Extensions. Number of Extension Rods 4.
- Tubular Micrometer Company Micrometer 4.00"-5.00" Excellent condition - Tubular Micrometer Company Micrometer 4.00"-5.00" Excellent condition.
- Starrett Depth Mic #445 1-3" rods - Vintage - Starrett Depth Mic #445 1-3" rods - Vintage - with case
- Mitutoyo Vernier Depth Gauge, Micrometer Type, 0-1" Range, 0.001" Grads
- Mitutoyo 114-202 V Anvil Micrometer .093-1 " .0001 MIC CARBIDE FACE
- MITUTOYO 122-127 BLADE OD Outside Micrometer 2 TO 3 in .0001 Grad
- Assorted Lot Of 14 Starrett Micrometer Wrenches 1” Round Standard & Other Items - Assorted Lot Of 14 Starrett Micrometer Wrenches 1” Round Standard & Other Items. Items come from personal tool box, assorted wrenches , 1/4” B&S radius gage, scribes 2 are 5 1/2” long, all are in good condition,see pictures a critical part of the description.
- Mitutoyo Holetest digital bore micrometer - 24.8K recent searches for these details Excellent condition, no markings.
- Mitutoyo Holetest digital bore micrometer. - Mitutoyo Holetest digital bore micrometer. 2 of the jaws do not self retract, functions correctly otherwise. Please note that I cannot vouch for calibration.
- Vintage Starrett Micrometer Number 436 3-4 inch - Number 634. Used shows wear paint loss dial moves as should.
- STARRETT 0-1 Inch ANVIL-PIN MICROMETER NO 220 w/ CASE - STARRETT 0-1 Inch ANVIL-PIN MICROMETER NO 220 w/ CASE. Tested and works as should. Sold as is. See pictures.
- Starrett Micrometer 722 inoperative - parts/repair with Depth Base and Case - This poor old guy, he's got to be sold for parts or repair. I tried various button presses and simultaneous ones and honestly I think it just can't be working right. Unless otherwise stated, they are used/pre-owned.
- External Micrometer VIS 25-50"0.01' Made in Poland in a Wooden Case with Tools
- 129-127 Depth Micrometer, 0 to 4" Measuring Range, 0.001" Resolution, 2.5" Base, - Gauge position is read from a graduated scale, dial, counters, or an electronic display. Item Specification. We will work with you to resolve any problem you may have. Item model number 129-127. Add To Favorites.
- 293-345-30 Digimatic Micrometer, Range: 1"-2"/25.4-50.8 Mm, IP65 - Ingress Protection certified IP65 for protection against dust and water.
- NEW Professional 0-25mm Digital Electronic Micrometer Outside 0-1"/0.00005" - With resolution of 0.001mm/0.00005" and accuracy of 0.002mm/0.0001". With a protective case. Humidity influence: no influence within relative humidity ≤80%. Auto search for maximum and minimum values.
- Professional 0-25mm Electronic Digital Micrometer Outside 0-1"/0.00005" LCD - With resolution of 0.001mm/0.00005" and accuracy of 0.002mm/0.0001". Extra large LCD screen. With a protective case. The color of box is random red or black. 1 x user manual. Power:button battery ( not included ).
- 0-25mm 0.01mm Gauge Outside Metric Micrometer Tool With Metal Caliper Tool I_UMJ - Resolution: 0.01mm. Dividing value: 0.01. Net weight: 230g. Range: 0-25mm.
- Vintage Scherr-Tumico 1" Caliper Micrometer in wooden box with calibrdating disc - 1" caliper Scheer-Tumico micrometer manufactured in St. James, Minnesota. It is in its original wooden box and was purchased in an Army-Navy Surplus Store. The item comes with a spanner wrench and the 1-inch calibrating disc. Vintage mid-1960s. In excellent working condition.
- Tube Clinometer ‑10°to 0°to 10°Clear Scale Angle Inclinometer With Fixing Hole - Feature: 1. Purpose: Horizontal micro angle test. If you do not receive our reply within 48 hours, pls. If you are satisfied with our service, pls. Range: -10° to 0° to 10°.
- Mitutoyo 1.0-1.2” Inside Bore Micrometer Holtest .0002 - Mitutoyo 1" - 1.2" Holtest. Condition is like new. 1.0000" ring gage included.
- Mitutoyo Digital Borematic Inside Sbm-50 568-309
- Mitutoyo 293-765-30 Digital Micrometer with Case 0-1'' .00005'' 0.001mm - Carbide measuring faces, friction thimble.
- Vintage Brown & Sharpe 600 Vernier Depth Gauge with 5" Blade in Original Case - Vintage Brown & Sharpe 600 Vernier Depth Gauge with 5" Blade in Original Case.
- 104-165 Mitutoyo Micrometer w/ Interchangeable Anvils 0-2" Machinist Tool/Case. - 104-165 Mitutoyo Micrometer w/ Interchangeable Anvils 0-2" Machinist Tool/Case..
- Vintage Japan Micrometer NSK Dial Vernier Caliper 6” Original wooden Box - Vintage Japan Micrometer NSK Dial Vernier Caliper 6” Original wooden Box. Fabulous condition!$10 shipping
- iGaging 1 Piece Digital Electronic Outside Micrometer Set 0-1" 1-2" 2-3" 3-4" - iGaging 1 Piece Digital Electronic Outside Micrometer Set 0-1" 1-2" 2-3" 3-4".
- brown sharpe straight line micrometer 599-3-10 nos
- Vintage Brown & Sharpe Micrometer Caliper with Wooden Box & Wrench #13 - I appreciate your understanding in this matter.
- 4 Pcs Outside Micrometer 0-4" /0.0001" Precision Machinist Tool Carbide Tip New - Feature： Carbide Measuring Face Super Hard Carbide Tipped Anvils Micrometer:0-1", 1-2", 2-3", 3-4" Micrometer Stick: 1", 2", 3" Graduations: 0.0001" with Vernier Scale Complete with calibration standards and wrenches ratched stop; lock nut, Ratchet Thimble Handle for precise application of force. Solid, Long Lasting Accuracy with Cast Steel Frame - Powder Coated Baked Finish Laser Etched Graduations will never fade Description： This precision outside micrometer set has Crisp, clear, easy-to-read graduation, and accurate to .0001"..
- Mitutoyo 515-611A Metric Snap Gage Checker, 20-320mm Range, 0.0001mm/0.001mm - Block pitch accuracy: ±0.001mm (±.00004"). Block travel: 100mm. Range: 20-320mm.
- Lot (2) NIB NOS Optosigma Differential Screw Adjusters, Mirror Adusters 133-1190 - Both Pieces are in good working order with no issues. Ready to be used for your application.
- Mitutoyo QuantuMike Micrometer Digimatic 293-185-30 IP65 0-25mm (0-1″) - 80 thousands vs. 25 per revolution. Basically Etalon rapidmike, just digital. Sweet mike.
- VINTAGE J.T. SLOCOMB 0-25mm OUTSIDE MICROMETER metric no. 26 - VINTAGE J.T. SLOCOMB 0-25mm OUTSIDE MICROMETER metric no. 26.
- Mitutoyo digital micrometer 0-1'', No 293-340-30
- Vintage Starrett Outside Micrometer 436 3" - 4" - No buy it now.
- Vintage Starrett Outside Micrometer 436 4" - 5" - No buy it now.
- Vintage Starrett Outside Micrometer 436 5" - 6" - No buy it now.
- L.S. Starrett Co Micrometer Part No. 230 In Excellent Condition Made In Usa 🇺🇸 - L.S. Starrett Co Micrometer Part No. 230 In Excellent Condition Made In Usa 🇺🇸.
- L.S. Starrett Co. No. 231 Outside Micrometer With Case Vintage - L.S. Starrett Co. No. 231 Outside Micrometer With Case Vintage.
- Mitutoyo 122-125-10 Blade Micrometer, Non-Rotating Spindle, 0 to 1" (0 to 25.4 - Non-rotating spindle. Range 0 to 1" (0 to 25.4 mm). Graduation 0.0001" (0.0025 mm). Accuracy ±0.00015" (0.0038 mm). Local pick up is not available.
- Vintage 0"-1" Mitutoyo No. 103-260 Outside Micrometer in Wood Case Japan - Vintage 0"-1" Mitutoyo No. 103-260 Outside Micrometer in Wood Case Japan. nice condition left to me by a deceased tool makere
- SPI 0.275 to 1/2", Carbide, Mechanical Inside Micrometer Set - Brand new never used. And way less than from SPi! Free Shipping!
- Intast comparative measurement type dial indicatorial - Black face easy to read.
- Scherr-Tumico Micrometer Set 0-1” 1-2” 2-3” 3-4” - Scherr-Tumico Micrometer Set 0-1” 1-2” 2-3” 3-4”. Condition is Used. Shipped with USPS Parcel Select Ground.
- NEW Fowler 0-1'' Precision Outside Micrometer, .0001 With Hard Case - Brand new! Free Shipping!
- Atlas Lathe Brown & Sharpe No 1 Outside Micrometer 0-1” Swiss Made Bridgeport - Up for sale is a nice condition Brown & Sharpe 0-1" No.1 Micrometer. Has former owners name etched on it as shown. It is Swiss made. I have other tools listed. I will combine shipping. Thanks for looking.
- Atlas Craftsman Lathe Starrett 1-2" Micrometer 436 Ratchet Lock .001 Bridgeport - Up for sale is a nice condition Starrett 1-2" micrometer. Has former owners name etched on the black as shown. I have other tools listed. I will combine shipping.
- Unknown Japanese 2" - 3" OUTSIDE MICROMETER - Not sure about the manufacturer of this micrometer but it looks japanese. Has some cosmetic wear but works fine.
- Vintage Brown And Sharpe 1"-2" Micrometer - Has some cosmetic wear and the previous owners name scribed into it but is in good working order.
- Brown & Sharpe No. 13 Outside Micrometer 0-1" , .0001" , Carbide faces & Case - HAS RATCHET STOP
- Vintage Brown & Sharpe Outside Micrometer And Clipper You Get Both - Vintage Brown & Sharpe Outside Micrometer And Clipper You Get Both.
- Mitutoyo 0-1" .0001" Outside Micrometer No. 295-153 - Has light wear but still in nice shape.
- NSK Japan 3"-4" Outside Micrometer 0.0001 Machinist - This micrometer has some surface paint missing and some light rust in spots. Turns nice and smooth. Besides the cosmetic wear it is in good condition.
- STARRETT TUBULAR ID INSIDE MICROMETER SET NO 823A - 1 1/2-8 Inches - Up for sale is a " STARRETT TUBULAR ID INSIDE MICROMETER SET NO 823A - 1 1/2-8 INCH RANGE " in excellent working condition- SMOOTH MOVEMENT, complete with the assembly chart, no personal etchings-case top has some wear(see picture), company closure, clean beautiful working useful used tool set!(as shown in pictures) Please take a minute to look at our other items. No pickups or deliveries. Some tools may need re-calibrating. If something isn't in our description or pictured, you can assume it's not included! Good Buyin
- MITUTOYO 146-222 Non-Rotating Spindle Groove Micrometer "Great Condition" - Manufacturer MITUTOYO. Do you need a lift gate truck for your drop off location?. These products are subject to export restrictions under U.S. law. Can't find the answer you're looking for?. Does not apply to cancelled or incorrect/ wrong product ordered.
- mitutoyo blade micrometer 0-1"/.0001". Machinist tool. - In good working condition.
- Vintage Woolworth Handy Micrometer
- Starrett Micrometer No 213-3 1"-2" & Brown & Sharpe 1" Standard C - Starrett Micrometer No 213-3 1"-2" & Brown & Sharpe 1" Standard.
- Vintage LUFKIN Rule Co. Micrometer Model No.1642V 1-inch - USA In Original Box - Vintage LUFKIN Rule Co. Micrometer Model No.1642V 1-inch - USA In Original Box. Thanks for looking
- S-t Industries 0-1” Digital Mic 54-2101-0000 - S-t Industries 0-1” Digital Mic 54-2101-0000. Used in perfect working condition. Comes with data cable for easy spread sheet use.
- Micrometer, Mitutoyo 103-205A 28”-29” - Mitutoyo 103-205A 28”-29”. Excellent condition with wooden box
- Mitutoyo 293-335-30 Digital Micrometer - Mitutoyo 293-335-30 Digital Micrometer. Used in great condition. Case is not original. Comes with certificate.
- Starrett 0-1" Modified Micrometers .0001 Graduation Model 436 - ITEM HAS BEEN MODIFIED SEE PHOTOS. SEE PHOTOS FOR CONDITION DETAILS. more coming soon!
- SPI Inside Micrometer .0001” .225”-.275” Range - SPI Inside Micrometer .0001” .225”-.275” Range. Item shows some signs of cosmetic wear including an etching (see all pictures). Item functions as it should! Smooth clean accurate! Does not come with a box. Thanks for looking!
- New Tritan Outside Mic Micrometer 11" to 12" w/ Wood Case 120096862 0333314
- Fowler Indicating Micrometer 0-1" .0001" VIS VIN Poland No Etchings Excellent - Fowler Indicating Micrometer 0-1" .0001" VIS VIN Poland No Etchings Excellent. Very lightly used condition if used at all. Minor signs of long term storage. These are badged VIS, VIN, & Fowler but they are all made at the same factory in Poland. This one is not marked with makers mark as seen in photos. Please review all photos to determine condition and identification. Item is sold as is with No Returns. Will be shipped via USPS Priority.
- New Tritan Outside Mic Micrometer 10" to 11" w/ Wood Case 120096862 0333313
- lot of 3 Starrett 436 RL Outside Micrometer 3", 4", 5" - Starrett 436 RL. One Owner Estate.
- NEW MITUTOYO 1-2" Mechanical Digit Outside Micrometer .0001" Carbide Tip 193-212 - Original sleeve. Resolution: 0.0001 in. Resolution Counter: 0.001 in. Accuracy: +/-0.0001 in. Black plastic case. Factory literature. Little wrench.
- Starrett 124MBZ Solid-Rod Inside Micrometer Set 50-300mm Range IN STOCK - Accuracy (mm) :Lead accuracy +/-.003mm per 25mm. Range (mm) :50-300mm. Graduations (mm) :0.01mm.
- Mitutoyo 169-103 Disc Micrometer 0-1" .001" Flange Micrometer Japan - Mitutoyo 169-103 Disc Micrometer 0-1" .001" Flange Micrometer Japan. 7/16" disc diameter. Looks like it had an etching on front cover that was scratched out. Excellent lightly used condition and zeros out nicely. Please review all photos to determine condition and identification. Item is sold as is with No Returns. Will be shipped via USPS Priority.
- Ram Products OZ-Eco Brushless Micrometer
- Vtg Modified Starrett Id Inside Micrometer Set. Modified 3 1/8" - 9 1/8" - VINTAGE MODIFIED STARRETT ID INSIDE MICROMETER SET. MODIFIED TO 3 1/8" - 9 1/8". INCLUDES CASE. MISSING 3-4 INCH ROD. 2 - 3. 4 - 5, 5 - 6, 6 - 7, 7 - 8 ARE ALL PRESENT. LOOKS LIKE SOMEONE HAS REPLACED THE FIXED ANVIL OF THE MICROMETER WITH A LONGER ONE FOR SPECIAL USEAGE. THIS INCREASES ALL THE LENGTHS BY 1.125 INCH. REPLACE WITH ORIGINAL TYPE OR CUT THIS ONE OFF TO PROPER DIMENSIONS. CASE IS ORIGINAL AND HAS TYPICAL WEAR ON THE CORNERS. INSIDE OF CASE LOOKS GOOD.
- Fowler Case ONLY for Digital Height Gauge 54-105-024. Very nice - Fowler Case ONLY for Digital Height Gauge 54-105-024. Very nice. The foam has been removed. In very nice shape with a few light scratches. Please see pictures for condition details.
- SPI Blade Micrometer 1-2” X .0001” No. 12-453-7 - SPI Blade Micrometer 1-2” X .0001” No. 12-453-7. Item shows signs of cosmetic wear from previous use including markings and etchings (see all pictures). Item functions as it should! Smooth clean accurate repeats! Anvils are parallel! Has been checked to gage blocks to verify accuracy. Does not come with a box or standard! Thank you for looking!
- Mitutoyo 1-2” Blade Micrometer .0001” No Box - No.122-126 - Mitutoyo 1-2” Blade Micrometer .0001” No Box - No.122-126. Item shows signs of cosmetic wear from previous use including an etching (see all pictures). Anvils are parallel - has been checked to gage blocks to verify accuracy. Very clean smooth and accurate! Last two pictures are for price reference only. Does not come with a box or a standard. Thanks for looking!
- USED STARRETT # 124 ID Inside Micrometer 6" - 7" Rod (only) - USED STARRETT # 124 ID Inside Micrometer 7" - 8" Rod (only). Good useable condition.
- USED STARRETT # 124 ID Inside Micrometer 6" - 7" Rod (only) - USED STARRETT # 124 ID Inside Micrometer 6" - 7" Rod (only). Good useable condition.
- 0-25 mm Micrometer with Case, New in the box - New in the box.
- Mitutoyo 103-180 Micrometer 3-4" .001" No Etchings - Mitutoyo 103-180 Micrometer 3-4" .001" No Etchings. I couldn't make out the model on the badge but it looks like a 103-180 with ratchet stop, carbide face, and lock. Overall good used condition with smooth function and adjustments. The wrench and standard are present. The case does not match as it is for a different version. In order to calibrate had to adjust the spindle quite a bit with wrench as seen in photos. Please review all photos to determine condition and identification. Item is sold as is with No Returns. Will be shipped via USPS Priority.
- USED STARRETT # 124 ID Inside Micrometer 5" - 6" Rod (only) - USED STARRETT # 124 ID Inside Micrometer 5" - 6" Rod (only). GOOD USEABLE CONDITION
- Micrometer Tools-Hand Central Tools Inc. Na, #Na; Micrometer With Blue (I-4661) - Gold, Silver, Coins. Things I Buy.
- MACHINIST DsK TOOLS LATHE MILL Chicago Latrobe Interchangeable Counterbore Set - NO EXCEPTIONS.
- Mitutoyo 103-179 Micrometer,2 To 3",0.001,Ratchet
- Starrett 1175 .0005” Dial Indicator Groove Gage with Case - We are a mom and pop operation. Usually collectibles and tools, new and used. Box is intact shows blemishes.
- 3-4" Mitutoyo 103-180 Outside Micrometer 103-180 .001 Ratchet Stop Carbide Face - THE LATEST!
- Starrett No. 224 Set D Micrometer 9-12" - We are a mom and pop operation. Usually collectibles and tools, new and used. Wood case shows wear from age and storage, one corner is loose, separated.
- Starrett No. 224 Micrometer 9-12"
- VTG. Lufkin Chrome Clad Micrometer #1811 0-1" IOB w/ instructions & wrench
- Lufkin and JT Slocumb Micrometers
- starrett 440 depth micrometer - starrett 440 depth micrometer.
- Brown and Sharpe #63A & 65 A Micrometer in wood box vintage machinist tool - they come as shown, they have been together for 50 plus years, I found them this way in the old wood boxes no tops !
- Mitutoyo 141-133 Inside Micrometer Set 2”-12” Range .001" Grads, w/Wood Box - Mitutoyo 141-133 Inside Micrometer Set 2”-12” Range .001" Grads, w/Wood Box.
- Vintage Starrett Outside Micrometer 7-8" No 436
- Fowler 0-1" Digital Counter Micrometer 0.0001" Outside Micrometer
- Nortools Outside Micrometer Precision Machinist Tool 0-1" /0.001" AD3000-1 - Pottery & Glass. Explore Endless Deals! We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty. Specialty Services. Movies & TV. Everything Else.
- Micrometer Head Ultra-Small/Small Metric Flat Plain 148 Series 0-25mm - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty. Pet Supplies. Item DetailsINSERT DESC. IMAGES . Specialty Services. Pottery & Glass.
- Starrett 440M Metric Depth Micrometer 0 to 75mm 3 Rods .01mm Grad - Very clean condition, as pictured. This is an older version; it has the lock nut but no ratchet. $12.50 for priority mail.
- Mitutoyo Economy Design 0-1" Friction Thimble Micrometer (103-135) - Mitutoyo Economy Design 0-1" Friction Thimble Micrometer (103-135). Never used box just opened. Case sleeve missing.
- Brown And Sharpe Point Micrometer 0-1" - It's an old Brown and Sharpe micrometer that measures 0-1"
- CRAFTSMAN Inside Micrometer Set 1.5-12.5” Satin Chrome Finish hardwood Case USA - CRAFTSMAN Inside Micrometer Set 1.5 - 12.5” with Satin Chrome Finish inside a hardwood Case made in USA. .001 Resolution excellent condition. Each anvil has two positions. If you use the outer position, you have to use the 1/2” cylindrical spacer. See photos for cosmetic details, such as minor scrapes and scuffs, etc. overall very nice condition.Made in USA 🇺🇸 This item will be shipped out USPS priority. The package weighs approximately 3 pounds and the dimensions are 15 x 8 x 4“.
- Mitutoyo 342-271 0 Crimp Height Type Digital Micrometers from Japan NEW
- Starrett 445AZ-6RL 52212 Micrometer Depth Gauge, Ratchet Thimble, 0-6" Range - Starrett 445AZ-6RL 52212 Micrometer Depth Gauge, Ratchet Thimble, 0-6" Range.
- 6"-7" J.t. Slocomb Outside Micrometer, Used, Usa - Item is a J T Slocomb 6"-7" outside micrometer. Made in Providence, RI. Is in perfect working condition.
- Inner Micrometer Internal Diameter Micrometer Set Measuring Tool 5‑30mm Inner... - There are scale on the ruler body, the reading is clear, the product range is 5-30mm 2. Built-in force limiting device, provide accurate and repeated readings, very useful and helpful 4. There are scale on the ruler body, the reading is clear, the product range is 5-30mm.
- 3 Starrett Wrenches For Micrometer - These are in good working condition.
- Vintage Starrett Measurement Tool , Athol Mass USA - Vintage Starrett Measurement Tool , Athol Mass USA.
- MITUTOYO Digimatic Outside Micrometer 293-577 MDC-475M 450-475mm Box HM14 - Wood Box 79x48x6.5cm. The wooden box is big. As you can see in the video. Can not be bundled with other products. Nothing is difficult. Don't worry. It works properly. Answer .
- MITUTOYO Digimatic Outside Micrometer 293-578 MDC-500M 475-500mm Box HM13 - Wood Box 83x50x6cm. The wooden box is big. As you can see in the video. Can not be bundled with other products. Nothing is difficult. Don't worry. A signature is required to receive the item. Answer .
- Vintage Mitutoyo Micrometer Machinist Tool
- MITUTOYO Outside Micrometer 103-160 575-600mm Box 84x50x6cm 27295 HM12 - Wood Box 83x50x6cm. Can not be bundled with other products. Nothing is difficult. Don't worry. Answer . For example, if you want 3 products.
- Starrett No 436 2" - 3" Outside Micrometer .001 Graduation - Starrett No. 436, 2"-3" micrometer. High quality, precision tool.
- Digital Caliper Vernier Micrometer Electronic Ruler Gauge Meter Measuring Tool - Carbon Fiber_ Composites Digital Caliper. Influence of humidity:Not important within 0 to 80% of relative humidity. ●MINIMUM SCALE TO READ Is 0.1 mm/0.01"". Resolution: 0.1mm 0.01"". Repeatability:0.1mm 0.01"".
- MITUTOYO Outside Micrometer 103-156 OM-500 475-500mm 0.01mm 73x45x4.5cm 27294 11 - Wood Box 73x45x4.5cm. It is zero point aligned. It's a big one. If the world is in pandemic chaos, it will take about one week to two months. (Depending on the situation, it may take longer for the product to arrive.).
- Mitutoyo 342-271-30 CHM-20MX Crimp Height Type Digital Micrometers
- NSK Micrometer Set 1-4” w/ Box- .0001" Resolution Carbide Japan Mfg - NSK micrometer set with all pieces in good used condition.
- Mitutoyo 102-707 0-25mm outside ratchet micrometer, .001mm graduation. - Case shows signs of use. See pictures for condition.
- BROWN & SHARPE INTRIMIK INSIDE BORE MICROMETER - 0.600" to 0.700" - This piece is an overall great condition, but I believe the anvils need to be reseated. Likely a very easy fix. I don't have a tool repair guy here, otherwise I would take care of it myself. Made in Switzerland by Brown & Sharpe.
- Miutoyo M491 5 pin plug Mu Checker probe
- Vintage Starrett No 823A Inside Micrometer Set 1-1/2" to 8" w/wood case – used
- Vtg Brown &Sharpe #59 0-1" Micrometer USA Very Clean Tested & Works - Vtg Brown &Sharpe #59 0-1" Micrometer USA Very Clean Tested & Works. In great condition as you can see from the pictures. It says 1938 described on the tool as you can see in the pictures. It’s in really good condition so I wouldn’t have thought it was that old but I guess it is. I’ve tested it all out and it works great.
- Vintage Starrett Micrometer Caliper 1-64 015625 Tool
- STARRETT T230XRL #230 Outside MICROMETER 0-1" Satin Chrome Finish - STARRETT T230XRL #230 Outside MICROMETER 0-1" Satin Chrome Finish. Used condition, please see photos. Thank you.sb17
- Starrett Paper Gage Micrometer No 223 Precision Machinist Tool Toolmaker - Starrett Paper Gage Micrometer No 223 Precision Machinist Tool Toolmaker.
- 3 micrometers - 3 micrometers. 2 Lufkin and one bs.
- Starrett 436XP - 1 to 2" Outside Micrometer w/ Box Machinist Tool Vintage
- Vintage Starrett 124 Inside Micrometer 2" to 12" in Wood Box Good Condition - Good used condition, as pictured. As you can see in the photos this is engraved and there is no handle. $14.50 for priority mail.
- inside micrometer 2-8 mitutoyo (incomplete Set) - inside micrometer 2-8 mitutoyo (incomplete Set).
- 0-25mm 0.01mm Gauge Outside Metric Micrometers Tool With Metal Calipers Tool ` u - Dividing value: 0.01. Color: As the picture. Resolution: 0.01mm. Range: 0-25mm.
- Vis Outside Micrometer 4"-5" .0001" Made In Poland With Wood Case (Tl127) - VIS OUTSIDE MICROMETER 4"-5" .0001" MADE IN POLAND WITH WOOD CASE (TL127).
- Mitutoyo MDH-25MB 293-100-10 Digimatic Micrometer High Accuracy 0-25m
- Vintage CEN TECH 0-1" Digital Micrometer .0001" MIB 5.75" Long Centech - Vintage CEN TECH 0-1" Digital Micrometer .0001" MIB 5.75" Long Centech. Great as pictured
- Mitutoyo 129127 Depth Micrometer
- Mitutoyo 293-344-3 IP65 Digimatic Digital Micrometer 0-1" Coolant Proof Great - Practically new except for the owner initials "CAH" inscribed in the back lightly (see pic). Black plastic case too is in beautiful condition. S&H will be FREE and securely boxed in the USA.
- Mitutoyo Tooth Thickness Micrometer GMA-25 123-101
- Starrett S436.1CXRLZ 436.1 Series, Ratchet Stop, Lock Nut, Carbide Faces,... - Starrett S436.1CXRLZ 436.1 Series, Ratchet Stop, Lock Nut, Carbide Faces,....
- Two Outside Micrometers Lufkin 4"-5" & 6"-7" Range .001" Grads - .001" Grads. 4"-5" Range. 6"-7" Range.
- Mitutoyo Micrometer Head - System was de-installed in working operational condition. WE HAVE SEVERAL WAREHOUSES.
- Starrett 671 Universal Indicator Attachment - Starrett 671 Universal Indicator Attachment. Works perfect. Feel free to ask me any questions.
- Testing Machines Micrometer - Mineola Long Island New York NY - Pocket Mic Good
- Lufkin Inside Micrometer Rod Set - vintage usa - RARE case - Lufkin Inside Micrometer Rod Set. Works great.
- f34) Vintage Starrett # 445 Micrometer Depth Gage In Wooden Case
- f33) Vintage Starrett # 445 Micrometer Depth Gage In Wooden Case
- PHASE II MICROMETER SET OF SIX 0-6" Recently Calibrated - PHASE II MICROMETER SET OF SIX 0-6" Recently Calibrated. (B33-5)
- Two Outside Micrometers 3"-4" & 5"-6" Range .001" Brown & Sharpe Slocomb - (1) JT Slocomb Co. (1) Brown & Sharpe. 3"-4" Range. 5"-6" Range.
- Mitutoyo 340-712 Digital Micrometer Set 6-12" Range .0001” W/ Standards - Mitutoyo 340-712 Digital Micrometer Set 6-12" Range .0001” W/ Standards. Case is missing top.
- Jt Slocomb 10-11" Micrometer - JT SLOCOMB 10-11" MICROMETER.(B33-2)
- Vintage LS Starrett No.226 Outside Micrometer 1-2" Ratchet Lock - Estate sale find, offering this vintage LS Starrett No.226 Outside Micrometer 1-2" Ratchet Lock. Check out photo's for details. Will combine other auctions for discount on shipping.
- Vintage LS Starrett No.226 Outside Micrometer 2-3" Ratchet - Estate sale find, offering this vintage LS Starrett No.226 Outside Micrometer 2-3" Ratchet. This micrometer has a locking nut but doesn't secure in place tightly, paint wear on frame shows higher use. Check out the photo's for details, thanks for looking. Will combine other auctions for shipping discounts.
- mitutoyo micrometer 0-25mm. 0.001mm - mitutoyo micrometer 0-25mm. 0.001mm pre-owned. Previous owner put initials on it but it works fine.Please zoom in on photos for condition.
- Vintage LS Starrett No.226 Outside Micrometer 3-4" Ratchet Lock - Estate sale find, offering this vintage LS Starrett No.226 Outside Micrometer 3-4" Ratchet Lock. Check out the photo's for details, thanks for looking. Will combine auctions for shipping discounts.
- Mitutoyo No 350-714-30 Digital Micrometer With New Focus 9064 - Sold together MITUTOYO NO 350-714-30 DIGITAL MICROMETER WITH NEW FOCUS 9064.
- Vintage LS Starrett No.226 Outside Micrometer 4-5" Ratchet Lock - Estate sale find, offering this vintage LS Starrett No.226 Outside Micrometer 4-5" Ratchet Lock. Check out the photo's for details, thanks for looking. Will combine auctions for shipping discounts.
- Mitutoyo 342-271-30 Crimp Height Type Digital Micrometers from Japan NEW 342271
- Starrett 9 - 12 " Interchangeable Micrometer X .001 "
- Vintage LS Starrett No. 226 Outside Micrometer 5-6" Ratchet Lock - Estate sale find, offering this vintage LS Starrett No. 226 Outside Micrometer 5-6" Ratchet Lock. Check out the photo's for details, thanks for looking. Will combine auctions for shipping discounts.
- ^^ Mitutoyo No 350-714-30 Digital Micrometer And Newport Series 423 - Sold together ^^ MITUTOYO NO 350-714-30 DIGITAL MICROMETER AND NEWPORT SERIES 423.
- Mitutoyo 103-141 OM-125 100mm-125mm Outside Micrometer - You are bidding on a previously owned and in good working condition Mitutoyo 103-141 OM-125 100mm-125mm Outside Micrometer. This auction is for the micrometer with 10mm bar, instructions, and case you see pictured. Nothing else included. It comes as pictured. Please take a moment to look at the pictures and assess the item. It has a few scuffs from use. It has been tested and is in good working condition. Please take a moment to check out my other great items! Thanks ccloan.
- Starrett Machinist Carbide Faces Outside Micrometer #2 - Excellent - Made by The L.S. Starrett Co. Starrett Number 2. Otherwise EXCELLENT CONDITION.
- Huge Machinist Micrometer Lot Starrett Lufkin Craftsman General Browne
- STARRETT # 823 Tubular Inside Micrometer Set, 1-1/2" - 8" .001", w/ OEM Case, EC - The tool set looks excellent for the age.1-1/2" - 8" range. We checked it at 1-1/2" and it checks on as pictured.
- 2- Starrett #230 micrometers. - 2- Starrett #230 micrometers.The satin chrome mic does have a stamping or initial polishing evident the other does not but was well used. Thanks for looking and have a great day.
- Machinist Tools Mitutoyo Japan Depth Micrometer Set. (6) Gages, Rods 4"-9", Mint - MACHINIST TOOLS MITUTOYO JAPAN DEPTH MICROMETER SET. (6) GAGES, 4"-9", MINT!! ROD LENGTHS 4", 5", 6", 7", 8" & 9". EXCELLENT CONDITION. NO PREVIOUS OWNER MARKS. VERY LIGHTLY USED. PLEASE SEE PHOTOS FOR EXACT ITEMS AND CONDITION.
- Outside Micrometer. Never used200mm-225mm - Outside Micrometer. Never used 200mm-225mm.
- Vintage PROTO TOOLS I-Beam Frame Machinist 1”-2” Micrometer (Made In U.S.A.) - Box has a lot of outer ware. Looks hardly used, if at all. You Grade!
- Starrett 0-.5" Adjustable Micrometer .001" - A signed credit card authorization form is required for all orders paid with credit card. We directly accept US issued credit cards.
- Vintage L.S. Starrett Co. Micrometer No. 3
- Pittsburgh Tools 47257 6" Digital Caliper - PITTSBURGH TOOLS 47257 6" DIGITAL CALIPER.
- Vintage Brown & Sharpe 7208 Indicator Jeweled 0005"
- 2-Starrett Outside Micrometers No. 436 1”-2”& 2”-3” USA
- mitutoyo quickmike absolute micrometer 0-1.2”.00005”/0-30.57.001mm - In good working condition.
- DIAL GAUGE VW 0-3mm ASE46972101000 OEM /#G M6L 8726 - DIAL GAUGE VW 0-3mm ASE46972101000 OEM. Important information! Want to buy more pieces?.
- RCBS Electronic Digital Micrometer - 1" (87320) - We do our best to process as quickly as possible. NO APO, FPO, DPO, Or US territories and protectorates. NO PO Boxes. Because of the efficient manner of our ordering system, orders placed cannot be canceled half an hour after they are made.
- (1) NEW Starrett 3732XFL-2 Electronic Micrometer / Range 1-2" / Res: 0.00005" - Part number: 3732XFL-2. -- Includes: Key Spanner & Fitted Carrying Case / Thimble: Friction / Resolution: 0.00005" (0.001mm) / Range: 1 to 2" (25.4 to 50.8mm).
- Micrometer Tool Brown & Sharpe No. 1, #Nvn; Micrometer , 0-1" , .000 (2008116-3) - Gold, Silver, Coins. Things I Buy.
- Vintage 0"-1" Mitutoyo No. 103-260 Outside Micrometer in Wood Case Japan - Vintage 0"-1" Mitutoyo No. 103-260 Outside Micrometer in Wood Case Japan. Used and Vintage (look like 1972) . 1 hinges on wood case is broken. There are some carving markers on it. Please check all images for details and let me know if you have any questions.Device and case only. Usps priority mail shipping and USA only.Thank you.
- Mitutoyo 12"- 18" micrometer 0.001" Model #104-201 (qq1q5 - Mitutoyo 12"- 18" micrometer 0.001" Model #104-201 (qq1q5.
- Starrett No. 230 Micrometer (1712226-1) - Gold, Silver, Coins. Things I Buy.
- Mitutoyo Micrometer Caliper 0-1" w/.0001" increments; original case - Mitutoyo Micrometer Caliper 0-1" w/.0001" increments; original case.
- Groove Checker Attachment for Micrometer Depth Gage Starrett 445 with 5/32 Rod - Overall length of depth rod is 16". Point rod has a total length of 15 3/4". The point rod does not have the flange at the end but does have the screw. I scanned the instructions for easier reading.
- Vintage The L.S. Starrett Co. No. 230 1" Outside Micrometer with Case - The L.S. Starrett Co., Athol, Mass.
- (1) NEW Starrett 3732XFL-1 Electronic Micrometer / Range 0-1" / Res: 0.00005" - Part number: 3732XFL-1. -- Includes: Key Spanner & Fitted Carrying Case / Thimble: Friction / Resolution: 0.00005" (0.001mm) / Range: 0 to 1" (0 - 25mm).
- Starrett No. 823 Inside Micrometer Set 1/2" - 4". & Original Starrett Hard Cas - This Starrett No. 823 set has been used and shows some wear but in very good condition. Padded case has scratches , nics and stains. Box is in solid condition. Side snaps open and closed. Lid stays tightly closed. The photoes are of the items that are being sold please judge them for yourself. thank you.
- Groove Checker Attachment for Micrometer Depth Gage Starrett 440 with 1/8 Rod - Overall length of depth rod is 6 3/4". The top end of rod looks to have been modified slightly. Point rod has a total length of 5 1/2". I scanned the instructions for easier reading.
- Mitutoyo vintage 6-12" Outside Digital Micometet Set Standards Case (dtopz1 - Mitutoyo vintage 6-12" Outside Digital Micometet Set Standards Case (dtopz1.
- VTG Starrett 209-C Micrometer 0”-1” - VTG Starrett 209-C Micrometer 0”-1”. There are signs of age and use to the items. No major damaging. There are signs of scratching, scuffing, and minor discoloration.
- Used Jt Slocomb Co. (Usa) Outside Micrometer #436 13" - 14" - I JUST BOUGHT OUT A HOUSE WITH MORE HIGH END TOOLS THAN I HAVE EVER SEEN, NEW AND USED. I HAVEN'T TRIED TO CLEAN OF POLISH.
- Vintage Lufkin Micrometer in original wood slide box with Directions - The box shows lots of age and wear.
- Set Of 6 Slocomb Micrometers 0-1" 1-2", 2-3", 3-4", 4-5", 5-6" & A Few Boxes - I JUST BOUGHT OUT A HOUSE WITH MORE HIGH END TOOLS THAN I HAVE EVER SEEN, NEW AND USED. MAY BE A LITTLE MINOR RUST, BOXES HAVE WEAR. I HAVEN'T TRIED TO CLEAN OF POLISH.
- 7” And 9” Micrometer Standard - 7” And 9” Micrometer Standard.
- Mitutoyo Micrometer Set Carbide Anvils Includes Set Standards (dtop62 - Mitutoyo Micrometer Set Carbide Anvils Includes Set Standards (dtop62. Free ship continental usa only
- Starrett #440 Depth Micrometer 0-9 W/Rods & Wood Case - This is as we found & bought-1 rod has a busted tip & there are a couple threads left on rod but getting the broken piece out could be a challenge-As you can see we left as is with no altercations to case or any engravings-Other than the 1 tip on rod which probably would be easiest to get another rod is that we believe this probably had a little tool wrench with it originally-Not sure of that as this wasn't ours personally but we just assume it probably did-That's what we know about this set please rely on pic's & personal knowledge of these type of items-Have a great day ! d530sc4b2-for our use
- Micrometer 0-25mm 0,01 mm Vintage Very Accurate Measuring Tool USSR - Vintage Micrometer USSRI make shipments the next business day after the purchase, and I ask you to be understanding of possible delivery delays - the Ukrainian postal operator tries to minimize such delays, but still, logistics is difficult.Buyer protection is in effect.Please watch the photos carefully as they are important part of description.Thanks for your interest.Have a look at some other tobacciana collectibles at our store.💛💙
- VG Starrett N0. 445 Depth Micrometer Complete 0-6” Range (qq1q1 - VG Starrett N0. 445 Depth Micrometer Complete 0-6” Range (qq1q1.
- mitutoyo digital micrometer 0-1”.00005”,0-25.4/.001mm.Machinist’s tool. - In good working condition.
- Starrett Depth Blade Micrometer Set 0-6 Inches No. 449 (2c5 - Starrett Depth Blade Micrometer Set 0-6 Inches No. 449 (2c5.
- Mitutoyo Micrometer No. 103-117 4"-5" 0.0001" w/hard case - Mitutoyo Micrometer No. 103-117 4"-5" 0.0001" w/hard case.
- Mitutoyo 178-377 Crank Shaft Detector Unit - Mitutoyo 178-377 Crank Shaft Detector Unit. ** This is old inventory from a precision tool distribution company. Open box and never used. Kept in a storage container inside a clean garage. The description above is from the Mitutoyo distributor website. The part number is inactive and this no longer a tool provided by mitutoyo. I was unable to find any other specifications on this product.
- Starrett 5-6'' No. 436 Outside Micrometer Friction Thimble
- Fowler 52-255-310-0 1/4"-5/16" Analogue Bore Gauge - Credit Card or Debit Card.
- 2 PC CEN-TECH MICROMETERs New - 2 PC CEN-TECH MICROMETERs New.Sealed never been used.
- Digimatic U-shaped Steel Sheet Micrometer 0-25mm PMU150-25MX Mitutoyo Japan NEW - Minimum display amount (mm): 0.001. I cordially answer it.
- Mitutoyo 193-106 Digit Outside Micrometer 125-150/0.01mm
- Starrett 436.1XRL-5 Outside Micrometer, Ratchet Stop, Lock Nut, Carbide Faces
- Starrett 436.1XRL-3 Outside Micrometer, Ratchet Stop, Lock Nut, Carbide Faces
- Starrett 436.1XRL-2 Outside Micrometer, Ratchet Thimble, Lock Nut, Carbide Faces - Thimble Type :Ratchet. Anvil Type :Flat. Lock Nut Type :Knurled Ring Type.
- Starrett 436.1XRL-4 Outside Micrometer, Ratchet Stop, Lock Nut, Carbide Faces
- Starrett 3-4" Outside Micrometer (.001") No. 436 - Starrett 3-4" Outside Micrometer (.001") No. 436. In good condition but please look at all the pictures for yourself.
- NSK Japan Micrometer Mfg Ratchet Thimble Depth Micrometer Set 0-6" Range w/ Case - NSK Japan Micrometer Mfg Ratchet Thimble Depth Micrometer Set 0-6" Range w/ Case. In used conditions
- Micrometer Machinist 0-1" 0.0001" - Kk48 - It is marked 0-1" and 0.0001". It seems to be in good used condition. It is marked made in China. Example; KS122. This lot is sold as is. Our mission is to save these tools and. We try to do the best job we can describing the item but we are not perfect and would like the opportunity to correct any mistakes that we've made.
- Starrett Cft436.1Xrl-2 Camouflage Micrometer Carbide .0001 Machinist Tools - LISTED IS A NEW OPEN BOX STARRETT CFT436.1XRL-2 MICROMETER. THIS IS A 1"-2" MICROMETER WITH CARBIDE TIPS AND .0001 RESOLUTION. COMES AS SHOWN IN CASE WITH WRENCH AND PAPERS. PLEASE ENJOY THE PICTURES. 2 SHIPPING SPEEDS OFFERED. BE SURE TO CHECK OUT MY OTHER ITEMS.
- Starrett No. 230 0-1" Outside Micrometer - Fair Condition 1 Inch Micrometer - Starrett No. 230 0-1" Outside Micrometer - Fair Condition 1 Inch Micrometer.
- Fowler IP54 Electronic Micrometer, 1-2"/25-50mm Range, .00005"/0.001mm - #220752355. Like New Condition In Case. Small Wear on Case. on an item by item basis for your convenience and value.
- RCBS 0-1” 0.00005 “ Electronic Digital Micrometer With Manual In Green Case - #120297364. Used and in good condition. Small Wear on Case. No Manufacturer Warranty. on an item by item basis for your convenience and value. after purchasing your item(s).
- Starrett 226 3 Outside Micrometer Set Wood Case Machinist Vintage - Starrett 226 3 Outside Micrometer Set Wood Case Machinist Vintage. Great Condition. High bidder will receive everything shown in the photos. Shipping is $19.99.
- Fowler Mechanical Inside Micrometer Set 4-120" 0.001" - THIS IS A COMPLETE SET.
- lufkin 4-5 micrometer no.1915 - lufkin 4-5 micrometer no.1915.
- brown and sharpe micrometer 0-1 - brown and sharpe micrometer 0-1.
- Mitutoyo Digital/Standard And Electronic 1" Micrometer In Hardcase - Mitutoyo Digital/Standard 1" Micrometer In Hardcase. This is fully functional micrometer but the battery needs replaced. Takes a D357H battery. Will include expired battery for buyers reference when purchasing a new battery. Hard case latch is tight. Standard reading is crisp (No number wear on thimble or shaft) and calibrated. Will ship securely
- Etalon Swiss .8 - 1.0” Inside Bore Hole Micrometer Intrimik Tri-Mic Holtest
- central scientific co micrometer 0-1 - central scientific co micrometer 0-1.
- Etalon Swiss 1.0 - 1.2” Inside Bore Hole Micrometer Intrimik Tri-Mic Holtest
- Etalon Swiss 1.2-1.4” Inside Bore Hole Micrometer Intrimik Tri-Mic Holtest
- STARRETT No. 436 1 INCH With Locking Function Knurled Cap Outside Micrometer USA - No Owners Marks.
- Etalon Swiss 2.4 - 2.8” Inside Bore Hole Micrometer Intrimik Tri-Mic Holtest
- Brown Sharpe USA Internal Bore Gage Micrometer 1.6 - 2.0" 599-281 Intrimik - Brown Sharpe USA Internal Bore Gage Micrometer 1.6 - 2.0" 599-281 Intrimik. Actual item pictured.Be sure to view our other items for more great tooling finds.
- Brown Sharpe USA Internal Bore Gage Micrometer 1.0 - 1.2" 599-281 Intrimik - Brown Sharpe USA Internal Bore Gage Micrometer 1.0 to 1.2" 599-281 Intrimik. Actual item pictured.Be sure to view our other items for more great tooling finds.
- Brown Sharpe USA Internal Bore Gage Micrometer .8 - 1.0" 599-281 Intrimik - Brown Sharpe USA Internal Bore Gage Micrometer .8 - 1.0" 599-281 Intrimik. Actual item pictured.Be sure to view our other items for more great tooling finds.
- micrometer 0-1 mitutoyo 202-204 Carbide Anvil - micrometer 0-1 mitutoyo 202-204 Carbide Anvil.
- jt slocomb micrometer 1-2 - jt slocomb micrometer 1-2.
- Starrett No 436-2" Outside Micrometer .001 Graduation USA - Blue Point FB-300A Bent Blade Feeler Gauge Set USA. No Owners Marks.
- swedish gage co micrometer 1-2 #100 Eskilstuna Sweden E-B - swedish gage co micrometer 1-2 #100 Eskilstuna Sweden E-B.
- Starrett No. 436 Outside Micrometer 0-1" w Ratchet Stop in No. 910 Box With Case - Starrett No. 436 Outside Micrometer 0-1" w Ratchet Stop in No. 910 Box With Case.
- Fowler Micrometer 1-2" .0001" 52-229-002 in Wooden Box
- Mitutoyo 293-232-30 Digimatic Micrometer Range: 50-75 mm with Output - All my products are 100% Authentic !
- 2pcs Standard Measuring Rod 50mm Caliper Micrometer Calibration Block Rod - DescriptionSize - 50mm outside micrometer standard measuring block with high precision of ±0.001mm, universal caliper outside diameter calibration rodMaterial - Made of high-carbon steel, ensure durability and accuracy, making it a reliable tool that can provide accurate readings over time.Feature - The micrometer standard calibration rod has a known length that is used to check the accuracy of the micrometer before measuring an object's thickness or length.Application - Available in various sizes, these micrometer standard calibration rods are commonly used in manufacturing, research, and quality control settings where precise measurements are necessary.Usage:Insert the rod between the micrometer jaws and compare the reading to the known length with a tolerance of a few microns.
- 2pcs Standard Measuring Rod 75mm Caliper Micrometer Calibration Block Rod - DescriptionSize - 75mm outside micrometer standard measuring block with high precision of ±0.001mm, universal caliper outside diameter calibration rodMaterial - Made of high-carbon steel, ensure durability and accuracy, making it a reliable tool that can provide accurate readings over time.Feature - The micrometer standard calibration rod has a known length that is used to check the accuracy of the micrometer before measuring an object's thickness or length.Application - Available in various sizes, these micrometer standard calibration rods are commonly used in manufacturing, research, and quality control settings where precise measurements are necessary.Usage:Insert the rod between the micrometer jaws and compare the reading to the known length with a tolerance of a few microns.
- Standard Measuring Rod 250mm Caliper Micrometer Calibration Block Rod - DescriptionSize - 250mm outside micrometer standard measuring block with high precision of ±0.001mm, universal caliper outside diameter calibration rodMaterial - Made of high-carbon steel, ensure durability and accuracy, making it a reliable tool that can provide accurate readings over time.Feature - The micrometer standard calibration rod has a known length that is used to check the accuracy of the micrometer before measuring an object's thickness or length.Application - Available in various sizes, these micrometer standard calibration rods are commonly used in manufacturing, research, and quality control settings where precise measurements are necessary.Usage:Insert the rod between the micrometer jaws and compare the reading to the known length with a tolerance of a few microns.
- 2pcs Standard Measuring Rod 100mm Caliper Micrometer Calibration Block Rod - DescriptionSize - 100mm outside micrometer standard measuring block with high precision of ±0.001mm, universal caliper outside diameter calibration rodMaterial - Made of high-carbon steel, ensure durability and accuracy, making it a reliable tool that can provide accurate readings over time.Feature - The micrometer standard calibration rod has a known length that is used to check the accuracy of the micrometer before measuring an object's thickness or length.Application - Available in various sizes, these micrometer standard calibration rods are commonly used in manufacturing, research, and quality control settings where precise measurements are necessary.Usage:Insert the rod between the micrometer jaws and compare the reading to the known length with a tolerance of a few microns.
- Standard Measuring Rod 25mm Caliper Micrometer Calibration Block Rod - DescriptionSize - 25mm outside micrometer standard measuring block with high precision of ±0.001mm, universal caliper outside diameter calibration rodMaterial - Made of high-carbon steel, ensure durability and accuracy, making it a reliable tool that can provide accurate readings over time.Feature - The micrometer standard calibration rod has a known length that is used to check the accuracy of the micrometer before measuring an object's thickness or length.Application - Available in various sizes, these micrometer standard calibration rods are commonly used in manufacturing, research, and quality control settings where precise measurements are necessary.Usage:Insert the rod between the micrometer jaws and compare the reading to the known length with a tolerance of a few microns.
- Standard Measuring Rod 100mm Caliper Micrometer Calibration Block Rod - DescriptionSize - 100mm outside micrometer standard measuring block with high precision of ±0.001mm, universal caliper outside diameter calibration rodMaterial - Made of high-carbon steel, ensure durability and accuracy, making it a reliable tool that can provide accurate readings over time.Feature - The micrometer standard calibration rod has a known length that is used to check the accuracy of the micrometer before measuring an object's thickness or length.Application - Available in various sizes, these micrometer standard calibration rods are commonly used in manufacturing, research, and quality control settings where precise measurements are necessary.Usage:Insert the rod between the micrometer jaws and compare the reading to the known length with a tolerance of a few microns.
- Standard Measuring Rod 275mm Caliper Micrometer Calibration Block Rod - DescriptionSize - 275mm outside micrometer standard measuring block with high precision of ±0.001mm, universal caliper outside diameter calibration rodMaterial - Made of high-carbon steel, ensure durability and accuracy, making it a reliable tool that can provide accurate readings over time.Feature - The micrometer standard calibration rod has a known length that is used to check the accuracy of the micrometer before measuring an object's thickness or length.Application - Available in various sizes, these micrometer standard calibration rods are commonly used in manufacturing, research, and quality control settings where precise measurements are necessary.Usage:Insert the rod between the micrometer jaws and compare the reading to the known length with a tolerance of a few microns.
- 2pcs Standard Measuring Rod 25mm Caliper Micrometer Calibration Block Rod - DescriptionSize - 25mm outside micrometer standard measuring block with high precision of ±0.001mm, universal caliper outside diameter calibration rodMaterial - Made of high-carbon steel, ensure durability and accuracy, making it a reliable tool that can provide accurate readings over time.Feature - The micrometer standard calibration rod has a known length that is used to check the accuracy of the micrometer before measuring an object's thickness or length.Application - Available in various sizes, these micrometer standard calibration rods are commonly used in manufacturing, research, and quality control settings where precise measurements are necessary.Usage:Insert the rod between the micrometer jaws and compare the reading to the known length with a tolerance of a few microns.
- Standard Measuring Rod 225mm Caliper Micrometer Calibration Block Rod - DescriptionSize - 225mm outside micrometer standard measuring block with high precision of ±0.001mm, universal caliper outside diameter calibration rodMaterial - Made of high-carbon steel, ensure durability and accuracy, making it a reliable tool that can provide accurate readings over time.Feature - The micrometer standard calibration rod has a known length that is used to check the accuracy of the micrometer before measuring an object's thickness or length.Application - Available in various sizes, these micrometer standard calibration rods are commonly used in manufacturing, research, and quality control settings where precise measurements are necessary.Usage:Insert the rod between the micrometer jaws and compare the reading to the known length with a tolerance of a few microns.
- Standard Measuring Rod 200mm Caliper Micrometer Calibration Block Rod - DescriptionSize - 200mm outside micrometer standard measuring block with high precision of ±0.001mm, universal caliper outside diameter calibration rodMaterial - Made of high-carbon steel, ensure durability and accuracy, making it a reliable tool that can provide accurate readings over time.Feature - The micrometer standard calibration rod has a known length that is used to check the accuracy of the micrometer before measuring an object's thickness or length.Application - Available in various sizes, these micrometer standard calibration rods are commonly used in manufacturing, research, and quality control settings where precise measurements are necessary.Usage:Insert the rod between the micrometer jaws and compare the reading to the known length with a tolerance of a few microns.
- Standard Measuring Rod 75mm Caliper Micrometer Calibration Block Rod - DescriptionSize - 75mm outside micrometer standard measuring block with high precision of ±0.001mm, universal caliper outside diameter calibration rodMaterial - Made of high-carbon steel, ensure durability and accuracy, making it a reliable tool that can provide accurate readings over time.Feature - The micrometer standard calibration rod has a known length that is used to check the accuracy of the micrometer before measuring an object's thickness or length.Application - Available in various sizes, these micrometer standard calibration rods are commonly used in manufacturing, research, and quality control settings where precise measurements are necessary.Usage:Insert the rod between the micrometer jaws and compare the reading to the known length with a tolerance of a few microns.
- Standard Measuring Rod 175mm Caliper Micrometer Calibration Block Rod - DescriptionSize - 175mm outside micrometer standard measuring block with high precision of ±0.001mm, universal caliper outside diameter calibration rodMaterial - Made of high-carbon steel, ensure durability and accuracy, making it a reliable tool that can provide accurate readings over time.Feature - The micrometer standard calibration rod has a known length that is used to check the accuracy of the micrometer before measuring an object's thickness or length.Application - Available in various sizes, these micrometer standard calibration rods are commonly used in manufacturing, research, and quality control settings where precise measurements are necessary.Usage:Insert the rod between the micrometer jaws and compare the reading to the known length with a tolerance of a few microns.
- Standard Measuring Rod 50mm Caliper Micrometer Calibration Block Rod - DescriptionSize - 50mm outside micrometer standard measuring block with high precision of ±0.001mm, universal caliper outside diameter calibration rodMaterial - Made of high-carbon steel, ensure durability and accuracy, making it a reliable tool that can provide accurate readings over time.Feature - The micrometer standard calibration rod has a known length that is used to check the accuracy of the micrometer before measuring an object's thickness or length.Application - Available in various sizes, these micrometer standard calibration rods are commonly used in manufacturing, research, and quality control settings where precise measurements are necessary.Usage:Insert the rod between the micrometer jaws and compare the reading to the known length with a tolerance of a few microns.
- Standard Measuring Rod 150mm Caliper Micrometer Calibration Block Rod - DescriptionSize - 150mm outside micrometer standard measuring block with high precision of ±0.001mm, universal caliper outside diameter calibration rodMaterial - Made of high-carbon steel, ensure durability and accuracy, making it a reliable tool that can provide accurate readings over time.Feature - The micrometer standard calibration rod has a known length that is used to check the accuracy of the micrometer before measuring an object's thickness or length.Application - Available in various sizes, these micrometer standard calibration rods are commonly used in manufacturing, research, and quality control settings where precise measurements are necessary.Usage:Insert the rod between the micrometer jaws and compare the reading to the known length with a tolerance of a few microns.
- Standard Measuring Rod 125mm Caliper Micrometer Calibration Block Rod - DescriptionSize - 125mm outside micrometer standard measuring block with high precision of ±0.001mm, universal caliper outside diameter calibration rodMaterial - Made of high-carbon steel, ensure durability and accuracy, making it a reliable tool that can provide accurate readings over time.Feature - The micrometer standard calibration rod has a known length that is used to check the accuracy of the micrometer before measuring an object's thickness or length.Application - Available in various sizes, these micrometer standard calibration rods are commonly used in manufacturing, research, and quality control settings where precise measurements are necessary.Usage:Insert the rod between the micrometer jaws and compare the reading to the known length with a tolerance of a few microns.
- Electronic Thickness Gauge Depth 0-12.7mm ~ Digital LCD Micrometer 0.001 10mm - Electronic Thickness Gauge Depth 0-12.7mm ~ Digital LCD Micrometer 0.001 10mm“Digital Depth Gauge” “Thickness Gauge” “Depth Measurement Tool”
- STARRETT 796.1XRL-1 Electronic Micrometer,1 In,Ratchet - STARRETT 796.1XRL-1. IP65 units are resistant to jet-directed and hose-directed fluids. IP54 units are water resistant. Grainger reserves the right to accept or reject any order. Power adapters and other modifications may be necessary for proper operation in other countries.
- MITUTOYO 112-237 Point Micrometer,0-1 In,30 Deg Carbide - MITUTOYO 112-237. Power adapters and other modifications may be necessary for proper operation in other countries. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- MITUTOYO 103-930 Micrometer Set,0-4 In - MITUTOYO 103-930. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Grainger reserves the right to accept or reject any order. Diversion contrary to U.S. law is prohibited.
- Starrett No. 263 Micrometer Head/Clamping Mounting Bracket-Machinist Tool - STARRETT NO. 263 MICROMETER HEAD/CLAMPING MOUNTING BRACKET-MACHINIST TOOL USA.. LOOKS GREAT. Free shipping included with Starrett tool.
- Clockwise Tools MMSR-01 Premium outside Micrometer Set with Carbide Tip 0-3" Mea - Single Hand Ratchet Handle Design for Precise Application of Force. Item model number MMSR-01. Add to Favorite. We do not accept P.O. Boxes.
- Rochester indicator sensor 5ADSS02770 / #A O1ME 1395 - Rochester indicator sensor 5ADSS02770. If you are not satisfied with the product - write to us. Want to buy more pieces?.
- DIAL GAUGE 0.01mm 0-10MM / #A O1ME 6342 - DIAL GAUGE 0.01mm 0-10MM. Important information! Want to buy more pieces?.
- Dial indicator MITUTOYO 2109 0.001-1mm / #A O1ME 3125 - MITUTOYO dial indicator 2109 0.001-1mm. Want to buy more pieces?.
- Vintage Brown & Sharpe #1011 Made in USA Micrometer - Great Condition!
- Micrometer Stand With Double Nonslip Clamping Pad For Micrometers Up To 4 - Durable Construction: The main body is cast iron, durable strong structure, corrosion-resistant, reliable performance and outstanding strength.Anti-slip: There is a rubber pad on the surface of the fixture to avoid damage to the instrument, ensure the stability of the micrometer, and prevent the micrometer from scratching.Multi-angle adjustable: Double fastening bolts can adjust the micrometer multiple angles, which is more convenient for measurement.Size: The maximum opening distance of the fixture is 3/4 inch (18mm).Suitable for: Use with micrometers up to 4"e; to provide measurement stability.QWORK
- starrett depth micrometer 440 - starrett depth micrometer 440.
- Lufkin CT1661V 0-1 in Micrometer - Lufkin CT1661V 0-1 in Micrometer.
- Mitutoyo 953551 Extension Rod - MITUTOYO 953551 EXTENSION ROD. In perfect condition!!
- Mitutoyo 193-101 Digit Outside Micrometer Ratchet Stop 0-25mm Range 0.01mm
- Micrometer Stand Holder Fixture Bracket Adjustable Fixing Base Tool - Feature: 1. Smart Adjusting: The fixing angle is adjustable, which enables more flexible working to satisfy your varied use needs. Better Material: Adopting premium alloy steel material with a sturdy structure, not likely to deform and very durable.
- Starrett 823E Tubular Inside Micrometer Set - I’M IN THIS FOR THE LONG HAUL.
- Vtg STARRETT Micrometer Caliper 230RL 1" Ratchet Stop Lock Nut Wrench Box Instrn - Original Box, Instruction Pamphlet, Ratchet Stop, Lock Nut, Wrench.
- Starrett No. 701 .500" - 1.500" .001 Increment Inside Groove Micrometer Case - Case has writing and is dirty.
- Mitutoyo 293-251-30 Coolant Proof Digimatic Micrometer 125-150 mm SPC Output JPN
- 8-150mm Caliper T-Bore Telescopic Gauge Accurate Adjustable Micrometer - The ends of made of stainless steel and precisely ground to a radius to achieve the proper clearance on the smallest hole when the gauge is entering. Anyway we will try our best to avoid this kind of thing.
- Mitutoyo 293-344 Digimatic Micrometer, 0-1"/0-25mm Range, .00005"/0.001mm - Mitutoyo Digital Mics 0-1 inch 293-344
- STARRETT INSIDE MICROMETER SET NO 124 w/ WOOD CASE - 2-8 INCHES Machinist Tool
- Fowler 72-229-201-0 Vernier Outside Micrometer with 0-1" Measuring Range - See Photos for Details and Conditions.
- Micrometer Head Measure Tool 0-25mm Round Flat Type Micrometer Head Tool - Needle type: Round head. Flat head and round head are available. Resolution :0.01 mm. Accuracy: ±0.004 mm.
- TESA BROWN & SHARPE 599-281-10 Inside Micrometer,Range 0.800 to 1.00" - TESA BROWN & SHARPE 599-281-10. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Mitutoyo 295-253 Mechanical Digit Outside Micrometer 0-1'' Range w/ Case - Mitutoyo 295-253 Mechanical Digit Outside Micrometer 0-1'' Range w/ Case.
- Mitutoyo 137-114 Tubular Vernier Insider Micrometer Made In Japan - Mitutoyo 137-114 Tubular Vernier Insider Micrometer Made In Japan.
- Elgin 12in welders level - Elgin 12in welders level. This item is well built heavy duty and shock resistant to falls.
- VINTAGE BROWN & SHARPE MFG CO. MICROMETER DEPTH GAUGE No. 607 w/FITTED CASE. - This fine, qualityBROWN & SHARPE MACHINIST TOOL will make a fine addition to your collection.
- VINTAGE L. S. STARRETT No. 124 INSIDE MICROMETER CALIPERS w/FELT LINED CASE. - From the depressions noted in the case, it appears that one small rod is missing. This fine, qualitySTARRETT MACHINIST TOOL will make a fine addition to your collection.
- Brown & Sharpe #1 0-1" .001" Industrial Machinist Micrometer Measuring Equipment - B-56 Preowned Free shipping This is as shown Works in great condition Original case is very warn and stained from use/storage I will guarantee this tool to your satisfaction Please look at the photos to see the quality of what you are purchasing Brown & Sharpe #1 0-1" .001" Industrial Machinist Micrometer Measuring Equipment.
- Used MITUTOYO 101-113 OUTSIDE MICROMETER: 0-1″ - Available with a ratchet-stop or friction thimble.
- Mitutoyo 0-1" Micrometer Precision Measuring .001" Resolution Ratcheting Thimble - The winner receives this perfectly working tool, in original Mitutoyo case with literature.
- Used Mitutoyo 145-194 Series 145 Caliper-Type Inside Micrometer, 1 to 2" - Accuracy0.0003".
- Fowler 52-229-001 Micrometer 0-1" Range, 0.001mm Graduation with Wood Case - 0-1" range, 0.001mm graduation marks.
- Starrett Inside Micrometer Set 8"- 25" in Original Hard Case - 1" Travel
- FOWLER 0" - 1" Micrometer, .0001" Friction Thimble, Carbide, EC - FOWLER 0" - 1" Micrometer, .0001" Friction Thimble, Carbide, EC. Case included. Shipped in a box with care Please ask any questions prior to purchase Thanks for looking
- Machinists Micrometers, Drill Gage, Caliper, and more Tools - All in good working order and very old.
- Etalon Brown Sharpe Small Bore Hole Inside Micrometer .200-.400 - Tested and Working.
- 0-3 Mitutoyo Micrometer .0001 Reading - 0-3 Mitutoyo Micrometer .0001 Reading. I tested them with gage blocks they in good working condition, carbide anvils are flat, spindle turn freely. They all have engraved on them. The 1-2 mic is missing a lock. This sale is for 3 micrometers only. Any question feel free to ask.
- Starrett No. 124-C inside micrometer, 8-32", .001", USA - As shown in pictures. Note some of the rods have the word "goodyear" electro etched on them
- Starrett No. 823B Tubular Inside Micrometer Set 1-1/2” To 12" Range 0.001" USA - Starrett No. 823B Tubular Inside Micrometer Set, 1-1/2” To 12" Range, 0.001" USA. Preowned Condition. Check the pictures for more details. Shipped with priority mail package.
- Mitutoyo 192-008, Bidirectional Probe - Mitutoyo 192-008 2-Direction Touch Probe The Mitutoyo 192-008 bi-directional touch probe works with a Mitutoyo Digimatic Series 192 multi-function type height gauge to measure height, steps, and inside and outside diameters in inches, and has a measuring force of 0.4N, a 3mm carbide ball tip, a repeatability of 2μm, and an overtravel of 1.5mm. The carbide ball tip provides hardness and long life. The probe comes with an integrated 150mm cable, and a holder arm and clamp.
- 5/16"-6" Telescopic Gauge Set Micrometer T-Bore Measurement Tool Kit - Size: 20 x 16 cm. Size A: 5/16"-1/2" (8mm to 12.7cm). Size B: 1/2"- 3/4" (12.7mm to 19mm). Quantity: 6pcs. Color: Silver. Durable and long service life.
- Starrett micrometer No. 216 Micrometer Machinist tool - 1" - Starrett micrometer No. 216 Micrometer Machinist tool - 1". This item appears to be in pretty good condition, with some wear. As seen in the pictures, there are some scratches and cracks on the screen part of this item. Despite the wear, this item works perfectly. Please check the pictures for more details. Message me with any questions. Fast USA shipping with tracking!! Warehouse location micro 8
- Newport Dm17-4 Differential Micrometer 4.1 Mm Coarse 0.1 Mm Fine 11 Lb. Load - Axial Load Capacity 49 N. Fine Travel 0.10 mm. Travel Range 4.1 mm. Graduations, Fine 1 µm. This unit will arrive in the condition shown. Graduations 10 µm. ALWAYS HERE TO HELP. A signed credit card authorization form is required for all orders paid with credit card.
- Outside Boice 1" Snap Gage & Carbide Anvils - Parts Unit Ii - This lot is for oneOutside Boice Gauge - Parts II. Fairly extensive scratching to the unit coating. This unit will arrive in the condition shown. It is being sold AS-IS and WITHOUT WARRANTY. A signed credit card authorization form is required for all orders paid with credit card.
- Starrett No. 577 Micrometer 0-1" 577 1 Inch Micrometer - Starrett No. 577 Micrometer 0-1" 577 1 Inch Micrometer. This item appears to be in good condition, with some wear. As seen in the pictures, there are some engravings on part of this item. Please check the pictures for more details. Message me with any questions. Fast USA shipping with tracking!! Warehouse location micro 7
- BETA LaserMike AccuScan 5012 - Sale is final!!
- Mitutoyo 103-127 0-1" 0.001" Friction Thimble Micrometer - Made in Brazil - In Box #M-4.
- Tesa Brown & Sharpe Intrimik Inside Micrometer - Head Unit Only - Tesa Brown & Sharpe Intrimik Inside Micrometer. ** This is old inventory from a precision tool distribution company. Open box and never used. Kept in a storage container inside a clean garage. The description above is from the website. The part number has changed over the years. Based on the information I have, I am unable to find the exact specifications of this model. The part number is no longer valid. It will require a new battery.
- Micro Controle Stage Dp58
- MITUTOYO No. 103-220 Outside Micrometer 5-6" .0001" Grad Made in Japan (USED). - MITUTOYO No. 103-220 Outside Micrometer 5-6" .0001" Grad Made in Japan (USED)..
- Starrett No. 823 - inside micrometer 4" to 24" w/ protective case - Made in USA - Offering a Starrett No. 823 - inside micrometer 4" to 24" w/ protective case - Made in USA. Good Used Condition with Original Manufacturer Packaging. Shows signs of normal use/wear. See photos for more details on what is included in this listing and its Condition. (ADLS3) Starrett No. 823 - inside micrometer 4" to 24" w/ protective case Made in America: Yes Micrometer Type: Tubular Inside Micrometer Range (in): 4 - 24" Graduations (in): .001" Measuring Rods (qty): 7 Case Type: Padded Case Accuracy (in): Mic head +/-.0001"; Rods +/-.0002" Rods are rigid and lightweight Each rod is marked with length Hardened and ground anvils Interchangeable anvils Quick reading figures Extension rods are made of steel
- Vintage Mitutoyo 103-219 Outside Micrometer 4-5"-.0001" w/Wood Storage Box - Vintage Mitutoyo 103-219 Outside Micrometer 4-5"-.0001" w/Wood Storage Box.
- Starrett 823BZ Tubular Inside Micrometer - Starrett 823BZ Tubular Inside Micrometer.
- STARRETT Micrometer Adjustment Spanner Wrench, Fits: Mitutoyo, Lufkin, More, EC - Good condition.
- Vintage Slocomb Outside Micrometer Caliper #27, 2" in Original Box - This outside caliper is in excellent working condition. The box is worn and has work-related soil, but fits the tool well. The caliper has only very small rust dots, most in one place. (see photos).
- Starrett No. 230 0-1" Outside Micrometer - Fair Condition 1 Inch Micrometer - Starrett No. 230 0-1" Outside Micrometer - Fair Condition 1 Inch Micrometer. This micrometer appears to be in pretty good condition, with some wear. Please check the pictures for more details. You can see there are some numbers lightly etched in the lower portion of the micrometer. This item is fully functional, and working properly. Message me with any questions. Fast USA shipping with tracking!! Warehouse location micro 4
- Starrett No. 230 0-1" Outside Micrometer - Fair Condition 1 Inch Micrometer - Starrett No. 230 0-1" Outside Micrometer - Fair Condition 1 Inch Micrometer. This micrometer appears to be in pretty good condition, with some wear. Please check the pictures for more details. You can see there are some numbers lightly etched in the lower portion of the micrometer. This item is fully functional, and working properly. Message me with any questions. Fast USA shipping with tracking!! Warehouse location micro 2
- Micrometer G.L 85 0-1" Great Lakes Machinist Vtg Tool - Good used condition.
- Mitutoyo high-precision machinist measure tool No. 115-153 micrometer 0-1"
- STARRETT no. 436 Micrometer 1" in box - STARRETT no. 436 Micrometer 0"-1" in box with bag, wrench, and paper work. See photos, Item Specifications and Condition Description. See my store for other tools.
- STARRETT high-precision machinist measure tool No. 230 micrometer 0-1"
- Starrett No. 436 Outside Micrometer 6-7 inch With Box - Starrett No. 436 Outside Micrometer 6-7 inch With Box.
- Used Mitutoyo ID-S 1012B Digimatic Indicator from Japan - The goods are all in the photograph.
- micrometer - micrometer. WYSIWYG
- starrett No.1010
- Starrett 436RL-3 Outside Micrometer, 2-3" Range, .001" Graduation - Starrett 436RL-3 Outside Micrometer, 2-3" Range, .001" Graduation.
- Lufkin No. 513N 0-6" Half-Base Depth Micrometer with Modified Tips on Rods - The top of the case was missing when we picked it up.
- Lufkin No. 680 Tubular 1 1/2"-12" Inside Micrometer with Case, Wrench & Handle
- STARRETT MICROMETER Range .000/1.000 With .0001 scale Made in U.S.A.
- micrometer set 0-3 - Apprentice dream starter set.
- 3 Micrometers: Reed Small Tool Works Lufkin, Ambrose Shardlow Machinist Rule Vtg - Ambrose Shardlow & Co. Ltd. - Lufkin Rule Co. I am not a professional machinist, however I’ve used these tools for many years and they appear to be working well with accurate readings. They operate smoothly with nice smooth turns.
- 【Near Mint】Mitutoyo DMC100-100 (129-115) Replacement Rod Type Depth Micrometer - The product is identified by its unique JAN code: 4946368016382. Grade : Near Mint. Work properly. Appearance of the item.
- Mitutoyo Digimatic Holtest Digital Bore Gauge Gage, Range 2.0-2.5in, 468-240 - Mitutoyo Digimatic Holtest Digital Bore Gauge Gage, Range 2.0-2.5in, 468-240.
- 0.2-1.2'' by 0.001'' Inside Micrometer, Satin Chrome Finished, Eg00-3221 - Ratchet stop, locking clamp. Graduation: 0.001".
- Mitutoyo - No. 114-202 Anvil Micrometer .093 -1. x .0001 Excellent Condition - LEFT OVER INSPECTION TOOL FROM ONE MAN SHOP.USED BY ME AND ONLY ME .NO MARKINGS.CALIBRATED YEARLY.CALIBRATION AND INDENTIFICATION STICKERS CAN BE EASILY PEELED OFF.THANKS FOR LOOKING ANDY.
- Vintage Micrometer (Set of 3) LS Starrett 436-1, 436-4, Tubular Micrometer 2-3" - The smallest is marked "Starrett" and "No. 436-1 in" on raised tabs and "The L.S. Starrett Co. Athol Mass. U.S.A. Made in U.S.A.". They all work smoothly. See high resolution photos for more and use the magnify feature.
- Starrett Micrometer Caliper #436-1 original box, Instructions & (1) wrench's
- 5/16''- 6" Precision Telescopic Gauge Micrometer Bore Measurement Tool Set 6Pcs - Quantity: 6pcs. Precision: 0.01. Size: 20 x 16 cm. Size A: 5/16"-1/2" (8mm to 12.7cm). Size B: 1/2"- 3/4" (12.7mm to 19mm). Color: Silver. Durable and long service life.
- Micrometer Head Measurement 0-25mm Metal for Machine Tools Fixtures Silver Tone - Color:Silver Tone. Accuracy: 0.01mm. Range: 0-25mm.
- Mitutoyo 137-204 Tubular Vernier Inside Micrometer 50-1000 Mm #New - ORIGINAL IMAGES OF THE ACTUAL PRODUCT ARE UPLOADED, WHAT YOU SEE IS WHAT YOU GET.
- OMEGA USA MICROMETER 0-1 inch OUTSIDE QUALITY VINTAGE USA TOOL - Bold engraving. Works perfectly. Turns smoothly over the entire range. No wear to the anvil or tip. Good choice for casual use. Nice functional addition to your collection. WYSARIWYG (what you see and read is what you get).
- Micrometer 0-1"e; /0.0001 Outside Premium Precision Machini...
- Two Vintage Micrometers 0-25mm and 25-50mm - Two Vintage Micrometers 0-25mm and 25-50mm. Two used functioning micrometers not in best cosmetic shape. There was some leather strips adhered to the units that is brittle and coming off
- B&S Inside Micrometer w/ Velvet Lined Original Box Brown & Sharpe - B&S Inside Micrometer w/ Velvet Lined Original Box Brown & Sharpe.
- Standard Inside Metric Micrometer Set Inside Micrometer 5-30mm Range 0.01mm - Standard Inside Metric Micrometer Set Inside Micrometer 5-30mm Range 0.01mm5-30mm Internal Micrometer 0.01mm Stainless Steel Accurate Screw Gauge Metric Inner Diameter Measuring ToolFeatures:brand new and .Name: internal micrometerColor: silverMaterial: stainless steelMeasuring range: 5-30mmPrecision: 0.01 mmNote:Transition: 1cm=10mm=0.39inchPlease allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!Package Includes:1 × Inside Micrometer1 × Wrench1 × Calibration Ring1 × Packing Box
- Vtg Brown & Sharpe MFG Co. Micrometer Tool #13 Providence Rhodesia Island RI C18 - Vtg Brown & Sharpe MFG Co. The color of an item/s may appear different in person due to the lighting in the photographs.
- Vintage Starrett No. 436 2-3" Inch Outside Micrometer - Pre-Owned in Box - Pre-owned - Good, working condition - In box, well taken care of.
- MITUTOYO No 123-125A .001" DISC FLANGE MICROMETER RATCHET 0 - 1" - MITUTOYO No 123-125A .001" DISC FLANGE MICROMETER RATCHET 0 - 1". The listed item is in used condition. Might have some scratches oil or grease marks Etc. Please check the photos before bidding. I try to show all defects if any. If you have a question, please contact me anytime. Combined shipping is ok for some items. Please check my other listings for similar items. COMBINED SHIPPING IS OK FOR MOST ITEMS.
- Mitutoyo No. 159-214 Combimike 3" to 4" and 70 mm to 100 mm Outside Micrometer - Mitutoyo No. 159-214 Combimike 3" to 4" and 70 mm to 100 mm Outside Micrometer W1
- Mitutoyo No. 123-125A Disk Flange Micrometer .001" Ratchet 0-1" No Box, Tool/Die - Mitutoyo No. 123-125A Disk Flange Micrometer .001" Ratchet w/Case 0-1" Machinist. Smooth Operation, Very Good Condition and does have initials of original owner, my brother. Sold in Lower 48 US States.
- SMIEC Outside Micrometer 0-1" X .0001 In Original Box - SMIEC Outside Micrometer 0-1" X .0001 In Original Box.
- ETALON Micrometer .00005 JEWELED IN CASE. FAST FREE SHIPPING - What you see is what you get.
- Mitutoyo 369-252-30 High Accuracy Digital Micrometer - Mitutoyo 369-252-30 High Accuracy Digital Micrometer.
- Brown & Sharpe No.1 Friction Thimble Outside Micrometer 0-1", Great Condition. - Brown & Sharpe No.1 Friction Thimble Outside Micrometer 0-1", Smooth Operation, Great Condition, No Box. Note: The Micrometer is etched with the initials of the original owner (my brother). Made in USA. Sold in Lower 48 US States.
- Mitutoyo Digital Outside Micrometer 293-231 25-50mm Range 0.001mm Coolant Proof - Mitutoyo Digital Outside Micrometer 293-231 25-50mm Range 0.001mm Coolant Proof.
- Starrett 124 Series Inside Micrometer Set 2" to 12” - Starrett 124 Series Inside Micrometer Set 2" to 12” with case, case is in rough shape. Has precious owner’s initials engraved. See pictures
- Brown & Sharpe 2”-3” Outside Micrometer - 0.001" Friction Thimble, Great Cond. - Brown & Sharpe 2”-3” Outside Micrometer - 0.001" Friction Thimble, Smooth Operation, Great Condition. Note: Micrometer has the original owners (my brother) markings engraved on the unit. No Box. Sold in Lower 48 US States.
- Brown & Sharpe Outside Micrometer 3"-4" Range .001", USA, Great Condition. - Brown & Sharpe Outside Micrometer 3"-4" Range .001", USA, Smooth Operation, Great Condition. Note: Micrometer is engraved by original owner, my brother. Sold in Lower 48 US States.
- Fowler Full Warranty 0-3" Digit Counter Micrometer Set 52-224-103-0 .0001" - Like new, not sure if they've ever been used.
- STARRETT No. 823C Tubular Inside Micrometer Set 4-24" Range, .001" USA W/ Case - STARRETT No. 823C Tubular Inside Micrometer Set 4-24" Range, .001" USA W/ Case.
- Starrett no 263 micrometer head 1 inch-thousandths - Starrett no 263 micrometer head 1 inch-thousandths. Found in a machinists box with other tools. I do not know anything about this item but if you are looking at this then you do. If this thing was used, it was very gently.
- LS Starrett [1in.No.436-2in.] Outside Micrometer, 1"-2" Range, Grt. Cond. No Box - LS Starrett 1in. No.436-2in. Outside Micrometer, 1"-2" Range, Smooth Operation, Great Condition, No Box. Sold in Lower 48 US States.
- Brown & Sharpe 1-2 Inch Slant Line Micrometer .001, Good Cond. Smooth Operation - Brown & Sharpe 1-2 Inch Slant Line Micrometer .001, Good Condition, Smooth Operation, No Box. Sold in Lower 48 US States. Note: Micrometer has engraving from original owner, my brother.
- Fowler Micrometer 2-3" 52-253-003 Includes case and standard. - Fowler Micrometer 2-3" 52-253-003 Includes wooden case and standard (USED). Adjustment wrench.
- Vintage Brown & Sharpe railroad micrometer - This is an example.
- Vintage Starrett No. 445 0-6 Inch Depth Micrometer - Incomplete - w/ 3 Rods USA - As shown, this is an incomplete set. It only comes with 3 rods. This has some rust and other signs of wear and previous use. Please see pictures for condition and what’s included.
- Mitutoyo 293-336-30 Digital Micrometer,1-2”, Friction Thimble,SPC Machinist Tool - With and without SPC output. Friction Thimble. With a standard bar. 0.00005" / 0.001mm Resolution. Supplied in fitted case. Origin Set. Functions Include. Features Include.
- Mitutoyo 7300 Dial Thickness Gauge 001-.400 In Original Case Certified Working!! - This is a Mitutoyo Thickness Gauge 001-.400 In Original Case with certificate of calibration. Case and padding are in good condition, as well as main micrometer. See photographs for details. Will package well and ship immediately.
- Mitutoyo 293-345-30 1-2" Ip65 Digital Micrometer Brand New Machinist Tool - MITUTOYO 293-345-30 1-2" IP65 DIGITAL MICROMETER BRAND NEW MACHINIST TOOL. Multiple available. Also have models with SPC output.Several other new Mitutoyo digital tools available for significantly less than retail.Message me with any questions or requests. I am willing to discount the purchase of multiple items.
- Brown And Sharp Machinist Sqare - Brown And Sharp Machinist Square. Some spots but works well
- Mitutoyo 103-222 Outside Micrometer, 7-8" Range, .0001" in Original Wood Box - Mitutoyo 103-222 Outside Micrometer, 7-8" Range, .0001" in Original Wood Box.
- 129-127 Depth Micrometer, 0 to 4" Measuring Range, 0.001" Resolution, 2.5"
- Set of 3 Chaun Micrometers 1"-2", 2"-3", 3"-4" all .0001" in homemade wood case - Good preowned condition.
- Chaun Brand 4" - 5"” .0001” Outside Micrometer In Wooden Box
- 52-215-003-1 Outside Inch Micrometer Set, 0-3" Range
- Nsk Caliber - .001 Japan - Nsk Caliber - .001 Japan. 6-in caliber This item is in like new condition with signs of age. It is a great vintage piece that functions better than new. The dial works perfectly and this thing has some good mass when it's in your hand. The item is sold working in as is no returns condition. I've been selling on eBay for over a decade be sure to message any questions prior to purchase.
- Starrett #1263 Micrometer Head, Stainless Steel, USA - Starrett #1263 Micrometer Head, Stainless Steel, USA. 1-Inch, thousands, with ratchet stop nut.
- Vintage Central Tool Co. Micrometer, .001" Grad, Old Tool - Here is a vintage micrometer. It is marked, "Made By The Central Tool Co. Auburn, R.I. U.S.A.". It is 4.5" and is in good, usable condition. Shipping is $6.50. Thanks for looking.
- J. T. Slocomb Co. 0-1” micrometer head. - J. T. Slocomb Co. 0-1” micrometer head. Turns smoothly no owners marks or rust or engraving.
- Lufkin 0-1" Micrometer Model 1641V - USA
- 0-8" Digital Electronic Depth Micrometer Set 0-200mm Gauge Carbide LCD Display - Hardened tool steel. Zero Set Key. Large LCD display. Spindle Lock. Automatic switch off. Resolution: 0.00005"/.001mm.
- 0.01mm Internal 5-30mm Inside Micrometer Diameter Measuring Tool Measuring Tool - High quality heat insulation grip. 12 Pairs Work Gloves 13 Gauge Polyester ECO Grey PU Coated Palm Safety Glove M L. 1.Non-rotating spindle. You may also like. Due to the difference between different monitors, the picture may not reflect the actual color of the item.
- 0.01mm Internal Diameter Measuring Tool Measuring Tool 5-30mm Inside Micrometer - High quality heat insulation grip. 1.Non-rotating spindle. You may also like. Due to the difference between different monitors, the picture may not reflect the actual color of the item. 104.89 USD.
- 0-360 Protractor Dgeree AngleFinder Ruler Measuring Measuring Vernier Capliper - Type: universal bevel protractor. 1pc Protractor. High precision laser engraving technique, clear scales and pattern, wear out opposition and not easy to fade. Due to the difference between different monitors, the image may not reflect the actual color of the item.
- 0-25 mm Chrome Plated Gauge Measuring Tools Digital Outside Micrometer Caliper - Auto search for maximum and minimum values. Level 5 Cut Resistant Gloves PU Coated Work Gloves with Power Grip M L XL 1 Pair. 6PCS Professional Drill Bit Set Masonry Drill Bit Concrete Drill Bit Hex Shank.
- Micrometer 0.01mm Internal Diameter Measuring Tool Measuring Tool 5-30mm Inside - 6PCS Professional Drill Bit Set Masonry Drill Bit Concrete Drill Bit Hex Shank. 6mm-100mm Diamond Hole Saw Drill Bit Cutter for Tile Glass Ceramic Marble. High quality heat insulation grip. Level 5 Cut Resistant Gloves PU Coated Work Gloves with Power Grip M L XL 1 Pair.
- NSK Micrometer 0-3” set in wooden case with standards and wrenches - NSK Micrometer 0-3” set in wooden case with standards and wrenches. See pictures. Name engraved on 0-1” micrometer.
- Starrett 823 Tubular Inside Micrometer Set W/ Case NO 823AZ 1-1/2-8 New
- XY Micrometer Manual Fine-tuning Cross Roller Precision Linear Stages 80*80*40mm - XY Micrometer Manual Fine-tuning Cross Roller Precision Linear Stages 80*80*40mm.
- MITUTOYO 200-225 0.01mm MICROMETERS w/ STANDARD & BOX ~ NEW CONDITION
- Starrett 12-13 Od Micrometer Box Only
- Starrett 436-2, 1" - 2" Micrometer
- Draper Outside Micrometer, 9-10" Range, .001" Graduation w/ Box
- Vintage Starrett Micrometer Sleeve - Vintage Starrett Micrometer Sleeve.
- Vintage Starrett Micrometer No. 216 - Vintage Starrett Micrometer No. 216.Knurled lock nut NOT working.
- Starrett Dial Bore Gage, Split Ball Anvil, #82C, 0.560 - 1.565" - 11-070-0 - Starrett 82-C split ball bore gage. Very good condition
- Vintage Brown & Sharpe No. 8 Micrometer Machinist Tool Read - OPENS FREELY. WOULD MAKE A GREAT ADDITION TO ANY COLLECTION!
- 2 Brown & Sharpe Micrometer Setting Standards - Round 1" & 2" Rod Style Standard
- Indiv Mic Standards 1 72227001 - Fowler - Indiv Mic Standards 1 (72-227-001). The order will be processed and completed by automatic warehouse system within 5 minutes.
- Starrett 436P-2 Outside Micrometer 1"-2" Range .001" Grads - Starrett 436P-2 Outside Micrometer 1"-2" Range .001" Grads
- Starrett Micrometer 1"-2" Model T2XRL Carbide .0001" - Box and Paperwork - Starrett Micrometer 1"-2" Model T2XRL Carbide .0001" - Original Box and Paperwork
- Lot of 3 Brown & Sharpe 0"-3" Outside Micrometers .0001" Carbide w/Wood Cases - Lot consists of.
- Vintage Reed Small Tool Works 2 Micrometer Set .0001" Worcester USA.
- Starrett No. 436FL-3 Outside Micrometer 2"-3" Inch Range, .001" Grads No. 436
- Starrett T226XRL-3 Outside Micrometer 2-3" Range Carbide .0001" - NOS
- Starrett 222XRL-1/2 Deep Throat Sheet Metal Micrometer 0"- 1/2" - 2" Throat
- Starrett 222BXR-1 0-1" Sheet Metal Micrometer 6" Throat Carbide Anvils - NICE - W/Original Box - EDP 50763.
- KEYENCE DIGITAL MICROMETER LS-7030MT High-Accuracy Digital Micrometer - What you see is what you get.
- Starrett 724 24" - 30" Outside Micrometer Set w/ Wooden Case Used Free Shipping - Vintage 24”-30” Starrett Micrometer in box. Please see photos and message me with any questions you have.
- Mitutoyo 468-165 inside micrometer - Factory sealed. only the box was opened.
- Devices C-2ML Circular Magnifying Telescoping Inspection Mirror with Extra - All-angle ball joint holds mirror head tightly at any angle. Heavy duty vinyl grip.
- 52-240-004-1, Outside Inch Micrometer with 3-4" Measuring Range
- Micrometer Stand, S907-C153 - Clamp can be adjusted and locked in any position.
- Vintage Sears Craftsman 0-1” Micrometer Made In USA 32nds./64ths. - Sold as is. Everything you see in the pictures is what is included in this lot. We of course will get them out as fast as we can. We will help resolve whatever issue you are having. We try very hard to provide good communication and always strive for everyone to have a positive experience.
- Mitutoyo Micrometer BLM-25MX 422-230-30 box cracked - Minimum display amount (mm): 0.001. b (mm): 11. Size a (mm): 12.5 size. Size c(mm): 31 size. L(mm): 65.6.
- Mitutoyo count outside micrometer M81025 Free Shipping with Tracking# New Japan - Pattern: M81025. Manufacturer: Mitutoyo. Constant Pressure Device: Ratchet Stop. Product size: 17.02 x 9.14 x 3.56 cm; 224 g. cm content: 1. Up to 0.01 mm can be easily read with clear numbers on the counter.
- 103-931 outside Micrometer Set with Standards, 0-4" Range, 0.0001" Graduation (4 - Supplied with Standards. Finish Type Satin.
- Micrometer 100-125Mm - 100% Genuine Product | You will get what you see in pictures.
- Mitutoyo Micrometer Head Standard Type MHS2-13L 148-120 Japan
- 293-231-30 Mitutoyo MDC-50MX Coolant Proof Micrometer IP65 MeasurLink 25-50mm - Protection class IP65. Minimum display amount (mm): 0.001. Oil-resistant materials are used for all plastic parts.
- SPI 13-823-0 Mechanical V-ANVIL Micrometer: .093-1.00″, 3 Flutes, Fitted Case - SPI 13-823-0 Mechanical V-ANVIL Micrometer: .093-1.00″, 3 Flutes, Fitted Case. New in original packaging
- Mitutoyo 103-137 Outside Micrometer Baked-enamel Finish Ratchet Stop 0-25mm
- Pittsburgh Digital Micrometer - SAE & METRIC (Model 63647) New FAST SHIPPING - Pittsburgh Digital Micrometer - SAE & METRIC (Model 63647) New FAST SHIPPING. C60 Pittsburgh Digital Micrometer - SAE & METRIC (Model 63647). If you have any questions or let us know. Please see current pictures for condition . Please be aware we ship daily if payment is posted by 5 pm during open hours. We do discounted shipping on multiple purchases.Why pay retail when you can stay with Mr. liquidator California ? Need bulk feel free to inquire if we can get you certain items! From electronics to hardware to tools we have it all!
- Precision tool lot. Mitutoyo,Enco and Fowler brands - Vintage and some current precision tools. Included are Mitutoyo Code No 129-132 DMC 4-6". And others as in pictures. All are in very good condition.
- Brown And Sharpe Point Micrometer 0-1" - BROWN AND SHARPE POINT MICROMETER 0-1".(B32-9)
- Mitutoyo Digital Disc Micrometer 0-1 Inch, Model323-350, Spc Output - Good condition.
- Starrett No. 230 0-1" Outside Micrometer - Fair Condition 1 Inch Micrometer - Starrett No. 230 0-1" Outside Micrometer - Fair Condition 1 Inch Micrometer. This micrometer appears to be in pretty good condition, with some wear. Please check the pictures for more details. You can see there are some numbers lightly etched in the lower portion of the micrometer. This item is fully functional, and working properly. Message me with any questions. Fast USA shipping with tracking!! Warehouse location micro 1
- Fowler 0-1" Depth Micrometer 4" Base - FOWLER 0-1" DEPTH MICROMETER 4" BASE.(B32-18)
- STARRETT No. 124-C 8-32" Solid Rod INSIDE Micrometer Set Machinist Tool Box Find
- Starrett 121Bz - 32" - 82" Inside Micrometers - Case - Excellent Condition - 32" TO 82" CAPACITY. CASE IS VERY NICE.
- MITUTOYO 229-127 Digital Depth Micrometer 0-4" With Pointed Rods - MITUTOYO 229-127 Digital Depth Micrometer 0-4" With Pointed Rods. Micrometer has been opened, and handled along with one rod, but never used. Two rods are still sealed. Return Policy: Item may be returned within 30 days of item delivery if original item is unused and in brand new condition. Buyer pays for the shipping.Thanks so much for looking at my sale/auction and please do not hesitate to contact me should you have any questions
- Starrett 724 Micrometer Set 30" - 36" Outside Diameter With Wooden Case - Starrett 724 Micrometer Set 30" - 36" Outside Diameter With Wooden Case. The Starrett Micrometer is used as you can tell in the photos but still functions well, because of the condition I won’t be asking for much. I’m also open to negotiate.There’s only damage to the wooden box other than that everything is in good condition.
- Moore & Wright Outside Micrometer No. 966 - 2"-3" Sheffield England VGC
- Moore & Wright Outside Micrometer No. 9668 - 3"-4" Sheffield England VGC
- Moore & Wright Outside Micrometer No. 966 - 1"-2" Sheffield England VGC
- Moore & Wright Outside Micrometer No. 966 - 4"-5" Sheffield England VGC
- Vintage STARRETT Solid Rod Inside Micrometer Set - 2" - 12" W/Original Box
- L. S. Starrett 1" outside micrometer - Because they are generally antique (i.e.quite old), they will likely have dings or scratches or other “issues”…. therefore it is not always possible to show every scratch, imperfection, etc.
- Mitotoyo 0"-12" O.D. Micrometer Set - Mitotoyo 0"-12" O.D. Micrometer Set. Carbide tipped Used set. All Mic's are accurate and functional. Box included. No standards included. The Set is Machinist owned and accurate. All 12 Mics are included. Box has been reassembled, opens, closes and latches firmly. All the thimble ratchets function correctly. Entire Set is mechanically sound.
- L.S. STARRETT USA NO.224AARLZ 0"-4" Micrometer Set - L.S. STARRETT USA NO.224AARLZ 0"-4" Micrometer Set.
- Scherr Tumico Outside Micrometer 6-12" Range .0001" Graduation, with Insp. Cert. - Range, 6-12”; Graduation. 001”. -Includes Inspection Certificate. -Fitted wooden case, tight to close.
- Mitutoyo No. 193-211 Micrometer 0 - 1" (.0001") in case - Mitutoyo No. 193-211 Micrometer 0 - 1" (.0001") in case. Preowned cond Inner foam has deteriorated G29
- Mitutoyo 1-2" Outside Micrometer (103-136) in case - Mitutoyo 1-2" Outside Micrometer (103-136) in case. Preowned in case G29
- Mitutoyo No. 111-166 Mechanical Spline Micrometer 0 to 1" .0001" Grad. Machinist - Comes as shown in case Rust in areas G29
- Starrett 449Az-6R 0-6" Depth Gage Micrometer 2-1/2" Base .001" 52320 Usa - STARRETT 449AZ-6R 0-6" DEPTH GAGE MICROMETER 2-1/2" BASE .001" 52320 USA. New old stock.
- Lufkin Replacement Wood Box Only for Micrometer - Lufkin Replacement Wood Box Only for Micrometer.
- Starrett No. 445 depth micrometer 6” Base Ratcheting Thimble. - starrett no 445 depth micrometer. Very good shape 6” base mic is smooth ratchet thimble everything is clean an works as it should few blemishes on base an case
- Vintage Craftsman Outside Micrometer Set 0-3" With Wooden Hinged Case Lathe Mill - Vintage Craftsman Outside Micrometer Set 0-3" With Wooden Hinged Case Lathe Mill.
- Starrett 50546 124BZ 2"- 12" .001" Inside Micrometer Set - New old stock. Came in with a set of unused starrett tools. Case looks new, foam is still pliable. Very minor rust spot on one piece
- Mitutoyo 340-720 Digital Micrometer with Interchangeable Anvils, 12-18" Range - Mitutoyo 340-720 Digital Micrometer with Interchangeable Anvils, 12-18" Range.
- Vintage Enco Micrometer Tool 60639 0-1" With Case Model No 605-01 - Vintage Enco Micrometer Tool 60639 0-1" With Case Model No 605-01.
- Taper Micrometer (Larger Size)
- Lufkin Rule 0-1" .0001 Micrometer Model 1641V USA owners initials
- Starrett No.445 0-6 Inch Depth Micrometer - Starrett No.445 0-6 Inch Depth Micrometer. 4” base . Box is painted. Depth micrometer is like new.
- Starrett 24 Pc, 0 to 24", 0.0010" Graduation, Outside Micrometer Set missing 4 - Starrett 24 Pc, 0 to 24", 0.0010" Graduation, Outside Micrometer Set missing 4. This is a very nice set of micrometers. It is missing the 4,5,8 and 9 inch micrometers and also the 6 and 8 inch standard. Also many of the mics have personal engraving on them. The chest does have some damaged as pictured but still very steady and will last for many more years. All mics do move but some could use a good cleaning and adjusting I am sure. I am willing to ship but would prefer local pick up because this set ways close to 200 lb. Comes just as pictured. If you have any questions please contact me. I usually ship the day after payment clears. If you have any issues I will accept a return. Thanks for looking!
- Brown Sharpe 0-4" Outside Micrometers Set Lot of 4 0-1" 1-2" 2-3" 3-4" #13 #48 - TWO HAVE OWNERS INITIALS; Brown Sharpe 0-4" Outside Micrometers Set Lot of 4 0-1" 1-2" 2-3" 3-4" #13 #48
- Four Micrometer In Box 0-1 1-2 2-3 0-1 - Four Micrometer In Box 0-1 1-2 2-3 0-1.
- Vintage Central Tool Company Tool Kit RED BOX SUARE Cranston Rhode Island USA - Rare Vintage Central Tool Company Tool Kit RED BOX SUARE Cranston Rhode Island USA.Distressed & Improperly Stored - Complete Safe Same Day Shipping Guaranteed
- Taper Micrometer (Smaller Size)
- 0.01mm Digital Thickness Gauge Meter Electronic Micrometer LCD Handle+Box - Large, easy-to-read LCD. - Real Range :0-12.7mm. - Accuracy: 0.01mm. - Power: One 1.55V battery(Not Included).
- Mitutoyo 3-4” Thread Micrometer 126-140 - Mitutoyo Thread Micrometer 126-140. Like new. Marked for calibration.
- Mitutoyo 513-412 Plastic Micrometer Case & Tool Made In Japan .030" Range .0005"
- MITUTOYO 0-3 Inch MICROMETER NO 103-922 w/ CASE - Up for sale is a " MITUTOYO 0-3 Inch MICROMETER NO 103-922 w/ CASE " in excellent LOOKING/ WORKING condition, the set looks New, spindles turn freely, ratchet stops work, spindle locks work, no personal etchings, company closure, clean beautiful working useful used tools!(as shown in picture) Please take a minute to look at our other items. No pickups or deliveries. Some tools may need re-calibrating. If something isn't in our description or pictured, you can assume it's not included! Good Buyin
- Mitutoyo 2-3” Thread Micrometer 126-139 - Mitutoyo thread micrometer 126-139. Like new. Marked for calibration.
- Starrett No. 483 V-Anvil Micrometers, 2 - 3", 3 - 4", 4 - 5" - Here's a set of 3 Starrett No. 483 V-Anvil micrometers in sizes 2 - 3", 3 - 4" and 4 - 5". All three work smoothly and read in 0.0001" increments. They all have carbide-faced anvils in excellent condition. As you will note in the photos, there are tool inventory numbers marked on one side of each micrometer, This is a nice working set.
- Vintage SHARS Depth Micrometer Complete 0-6” Range - Stay safe & well. Complete 0-6” Range. and would love the opportunity to make it right.
- L.S. Starrett Stainless Can Seamer Micrometer Tool W/ Pocket Case ATHOL MASS USA
- Starrett 261L Micrometer Head 0-1/2" Range .001 Grads #261 Machinist Lot #255 - Plenty of high resolution pictures are featured. We have here a nice. Used.in good condition. Has an engraving.See pictures!
- Mitutoyo 1.2-1.6” Inside Bore Micrometer Holtest Intrimik Tri-Mic .0002 368-238
- Mitutoyo 368-804 Holtest Inside Bore Micrometer .5- .65" Machinist Tool Intrimik
- Brown Sharpe 8-9” Outside Micrometer Machinist Tool Maker OD Mic .001"
- 0-6 Mitutoyo 104-137 Interchangeable Anvil Outside Micrometer Set Machinist Tool
- Brown Sharpe Swiss Internal Bore Gage Micrometer .425 - .500" 599-281-5 Intrimik
- Mitutoyo 193-211 0-1" .0001" Outside Micrometer with Case - Mitutoyo 193-211 0-1" .0001" Outside Micrometer with Case. This micrometer is in good condition. It has some normal wear from being used/handled. There are some scuffs/scratches from being handled. It works just like it should. There is some discoloration to the silver colored parts. The case is scratched/discolored. The case is dirty/stained. It comes with the little adjustment wrench. Look at all pictures to see the condition. Free U.S. shipping on this auction.
- Starrett T436.1XRL-2 Outside Micrometer, Ratchet Thimble, Lock Nut tenth Reading - Starrett T436.1XRL-2 Outside Micrometer, Ratchet Thimble, Lock Nut tenth Reading.Open box.
- Mitutoyo 293-185-30 Electronic Digital Micrometer Quantumike - Mitutoyo 293-185-30 Electronic Digital Micrometer Quantumike.
- Starrett no. 436 Outside Micrometer 2-3 in diameter, .001 ratcheting. - Starrett 2-3 in outside micrometer, .001 resolution. Mics are in good working condition, has “ Tool Crib” scribed into body of micrometer
- Vintage STARRETT No. 436 - 1 in OUTSIDE MICROMETER CALIPER, Box & Paper - I got this box from my dad and it came from his dad so my grandfather. This is a used micro with a round item in it, a small beat up brown rag, screw threads and tap drill sizes chart and a dirty instruction sheet. This item was used in real life.
- Two (2) Starrett Micrometer Machinist Fixture Plate w/ Mitutoyo Micrometer - Used condition. See pictures for condition.
- Mitutoyo 202-254 Outside Micrometer 4-5 in 0.0001, Non Ratchet Great Condition - Mitutoyo 202-253 Outside Micrometer 4-5 in .0001 resolution. Has minor fading on body from normal use. Non-ratcheting
- Mitutoyo 342-271 0 Crimp Height Type Digital Micrometers F/S from Japan NEW - It is not available on weekends as the any Office is closed. Important point. Condition is a personal opinion.
- Micrometer 0-1" /0.0001 Outside Premium Precision
- Mitutoyo 103-177 103 Series 0 to 1" SAE Mechanical Outside Micrometer - 103 Series™ 0 to 1" SAE Mechanical Outside Micrometer (103-177) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-179 103 Series 2 to 3" SAE Mechanical Outside Micrometer - 103 Series™ 2 to 3" SAE Mechanical Outside Micrometer (103-179) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-180 103 Series 3 to 4" SAE Mechanical Outside Micrometer - 103 Series™ 3 to 4" SAE Mechanical Outside Micrometer (103-180) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 293-333 Micrometer 3" to 4" - Resolution: 0.00005" / 0.001mm. Rated IP65 for resistance to penetration by dust and liquid up to the force of a low-pressure water jet. to rotate the barell to line up.
- Mitutoyo Crimp Height Type Digital Micrometers 342-271-30 CHM20MX 7031
- 6pcs Telescoping Gage Set Starrett Hole Bore Range Precision Machinist Tool - · Double action rigid handle with self centering feature for quick checking of holes, slots and recess up to 6" deep. Product application. Product features. · Size D: 1-1/4" - 2-1/8" (32mm to 54mm).
- Vintaage Micrometer Screw Thread 3piece Set - 3 piece set: 0-1'' 1-2'' 2-3'' Included original Wood Box, small wrench,2'' insert.
- USA Made GENERAL/MG lot of 4 micrometers 2-3”, 3-4”, 4-5” 5-6” New old stock - USA Made GENERAL/MG lot of 4 micrometers 2-3”, 3-4”, 4-5” 5-6” New old stock.
- Vintage 0 TO 6" OD MIC MICROMETER SET POLAND .0001" READ DESCRIPTION - 3-4” doesn’t turn5-6” the handle turns but spindle doesn’t.They are clean but 2 need work. Selling as found.Machinist estate find.Look at pics for measurements. Look at pics for condition. Any questions ask. International buyers, this item will be shipped through global shipping program so there may be other fees so take that into consideration. *I do combine shipping please let know when done so I can send invoice Payment: * is due at time of purchase * SALES TAX - Ebay will automatically collect sales tax from those states that now require for online transactions.
- Micrometer Stand�Fully adjustable micrometer clamp�Non marring�5/8�capacity - Non marring.
- mitutoyo digital micrometer 0-1" high precision - Features of the 350-711-10 Mitutoyo Digimatic Head This item is in Used and in Excellent Condition.
- Vintage Scherr Tumica I.d. Micrometer(B32-2) - VINTAGE SCHERR TUMICA I.D. MICROMETER(B32-2).
- Thorlabs DM22 Differential Micrometer, .72" Range, 0.5 um/div Fine Adjustment - See Thorlabs website for all data.
- INSIZE 3203-2FA Electronic Outside Micrometer,Lock Nut - INSIZE 3203-2FA. Grainger reserves the right to accept or reject any order. Grainger Part #:462W06. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Power adapters and other modifications may be necessary for proper operation in other countries.
- STARRETT 222BXR-1 Sheet Metal Micrometer,0-1,6 In Throat - STARRETT 222BXR-1. IP65 units are resistant to jet-directed and hose-directed fluids. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Fowler 0-1" Blade Micrometer - FOWLER 0-1" BLADE MICROMETER.(B32-5)
- FOWLER 0-6" DEPTH MICROMETER Recently Calibrated - FOWLER 0-6" DEPTH MICROMETER.(B32-1)
- Classic Starrett 216XFL-1 Micrometer Caliper, Original Box And Inserts - Classic Starrett 216XFL-1 Micrometer Caliper, Original Box And Inserts. Good condition.. Preowned.. used.. includes all inserts.. small scratch on the dial.. see pictures for more details..
- Vintage Lufkin Rule Co No. 515 Blade Depth Micrometer 0-6'' W/ Wooden Case - Model: 515. Quality Products at Lowest Prices. We're down to earth, easy to work with people.
- New Fowler Outside Micrometer Set with 0-3" Range 52-229-213-0 (Set of 3)
- Starrett Micrometer No.436P-3 2" - 3" - Starrett Micrometer No.436P-3 2" - 3". Used in good condition works fine. Previous owners markings you can see in the pictures. Check the pictures Let me know if you have questions
- Starrett No. 238 Micrometer Caliper - STARRETT NO. 238 MICROMETER CALIPER. Works fine turns nice and smooth locks. a lot of previous owner markings on it Check the pictures let me know if you have questions
- Brown & Sharpe 1 In Micrometer - BROWN & SHARPE 1 IN MICROMETER, SHOWS AGE SHOWS USE, HAS HEAVY MARK ON ONE SIDE, WORKS FINE, ANVILS FINE,
- Central Tool 2-3" Outside Micrometer USA - OLDER USA MADE CENTRAL TOOL 2-3 IN MICROMETER. SHOWS AGE SOME SOME USE, NO DAMAGE, WORKS FINE, MEASURES 2-3 INCHES
- 6pcs 5/16"-6" Telescopic Gauge Set Micrometer T-Bore Measurement Tool Kits - Quantity: 6pcs. Size: 20 x 16 cm. Size A: 5/16"-1/2" (8mm to 12.7cm). Size B: 1/2"- 3/4" (12.7mm to 19mm). Color: Silver. Durable and long service life.
- Mitutoyo 129-132 Depth Micrometer 0"-6" X .001", DMC4-6" - Mitutoyo 129-132 Depth Micrometer 0"-6" X .001", DMC4-6". Nice condition.
- 0-8" Digital Electronic Depth Micrometer Set 0-200mm Gauge Carbide LCD Display - Hardened tool steel. Zero Set Key. Large LCD display. Spindle Lock. Automatic switch off. Resolution: 0.00005"/.001mm.
- Paper Micrometer B.C. Ames Co. No2 Waltham,MASS Vintage Antique Tool Graphic Art - Paper Micrometer B.C. Ames Co. No2 Waltham,MASS Vintage Antique Tool Graphic Art.
- SNAP-ON MIC2-3E 2-3" 4 PC MECHANICAL Micrometer Set Mic0-1E Mic3-4e Mic1-2e - SNAP-ON MIC2-3E 2-3" 4 PC MECHANICAL Micrometer Set Mic0-1E Mic3-4e Mic1-2e. All tested and works. One is missing the battery cover and battery and one will need a new battery. Other two are usable now. Comes just as pictured. If you have any questions please contact me. I usually ship the day after payment clears. If you have any issues I will accept a return. Thanks for looking!
- Micrometer Dial 0-2mm , 2μm resolution USSR NEW (old stock) - I bought this instrument, new some 30 years ago and kept it unused in its box till now. It is in perfect and working condition as seen on the photos. For demonstration purposes , I have also put a similar (resolution 1um) instrument on a proper heavy duty base, which is not Included and to be purchased separately!
- SPI 3”-6” Outside Micrometer 3 Piece Set Set 3-4”/ 4-4”/ 5-6” - SPI 3”-6” Outside Micrometer 3 Piece Set Set 3-4”/ 4-4”/ 5-6”.
- Starret Micrometer Caliper no. 22412"-16" - Just the Caliper & Wooden Lid - Starret Micrometer Caliper no. 22412"-16" - Just the Caliper & Wooden Lid.
- FEDERAL # 200P-1 Indicating MICROMETER 0" - 1" x .0001" With Case Works
- Vintage Toyo Seiki 0-25 Outside Micrometer 0-.01" mm Made in JAPAN - Vintage TOYO SEIKI Micrometer Model B-2290 Good used condition We did not clean the micrometer It is in the condition found Items in photos are included
- Mitutoyo 293-336-30 Electronic Micrometer,1 To 2",0.00005" - There is also an auto power ON/OFF function that automatically turns the unit on when pressure is applied and off when pressure is released. Zoro Select U51900.031.0600 Lag Screw, 5/16 In, 6 In, 18-8 Stainless Steel.
- Mitutoyo 422-360-30 Digital Micrometer,Blade,0 To 1",Spc - Zoro Select U51900.031.0600 Lag Screw, 5/16 In, 6 In, 18-8 Stainless Steel. & Recepticles. Electrical Outlets. Light Industrial. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
- The L.S. Starrett Co. No. 436 1-2" Outside Micrometer Friction Thimble .0001" - The L.S. Starrett Co. Friction Thimble. Model: No. 436. The item is exactly as pictured. 1-2" Range.
- Mitutoyo 1" Micrometer 101-113 - Mitutoyo 1" Micrometer 101-113. Used in original case and in excellent condition.
- INSIZE 3109-50E Electronic Outside Micrometer - Manufacturer: INSIZE. With our dynamic pricing model, our prices are always competitive. Competitive Pricing. You're already purchasing the item. Item part number: 3109-50E. Item MPN: 3109-50E. Ratchet friction thimble.
- Vintage Carl Zeiss Jena 0-25 mm Micrometer Passometer; Germany, Box
- Vintage Carl Zeiss Jena 25-50mm Micrometer Passometer; Germany, Box
- VINTAGE Brown & Sharpe Pocket Micrometer U.S.A.; BOX
- Starrett No. 436-1 Micrometer Machinist Tool USA 0.0001 Resolution FREE S/H! - Starrett No. 436 1in.
- Cessna Aircraft Micrometer Mic Machinist Precision Measuring Tool Aviation Vtg - This tool is in excellent / near mint condition and it appears that it may no have even been used. It has been tested and is accurate. No obligation at all - if your not thrilled - you can just pass on it.
- Mitutoyo 115-215 Spherical Face Micrometer Ratchet Stop 0-25mm Range 0.01mm
- 5/16''- 6" Precision Telescopic Gauge Micrometer Bore Measurement Tool Set 6Pcs - Quantity: 6pcs. Precision: 0.01. Size: 20 x 16 cm. Size A: 5/16"-1/2" (8mm to 12.7cm). Size B: 1/2"- 3/4" (12.7mm to 19mm). Color: Silver. Durable and long service life.
- Starrett Micrometer 210A-P Screw Thread Micrometer Original Box USA - Starrett Micrometer 210A-P Screw Thread Micrometer Original Box USA. New old stock Condition. Check the pictures for more details. Shipped with first class package.
- Mitutoyo 342-371-30 Crimp Height Micrometer, 0 to 0.8 inch (20mm) Range - Mitutoyo 342-371-30 Crimp Height Micrometer, 0 to 0.8 inch (20mm) Range.
- Mitutoyo Omc-150 104-135 Replacement anvil type outside analog micrometer F/S - Everything shown in the photos is included, and it is likely to be a complete set.
- Mitutoyo 295-153 Micrometer 0-1” with 0.0001” Graduation, in Case - We appreciate your consideration! and understand what you are buying.
- Starrett No. 216 Micrometer, Vintage, in Case - We appreciate your consideration! and understand what you are buying.
- SHAHE 0-25 mm 0.001mm Tube Digital Outside Micrometer with Single Round - This product is OPEN BOX! This product is in excellent condition. You're already purchasing the item. With our dynamic pricing model, our prices are always competitive. HOLOSUN Elite Red Dot Sight HE508T-RD X2.
- Outside Micrometer Set 0-4" - High Quality outside Metric Micrometer,0.0001" Gr - To protect your high-precision device more carefully, the ratchet speeder fulfilled its role. Accuracy 0.0001" 0.0001" 0.0001" 0.0001" 0.01"/ 0.1mm 0.01"/ 0.1mm. Ratchet Thimble handle for precise application of force.
- Mitutoyo Hds Digimatic Heightgage - Item is sold as is where is.
- TESA BROWN & SHARPE 78.112377 Micrometer Gage,Range 0.335 to 0.400" - TESA BROWN & SHARPE 78.112377. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- TESA BROWN & SHARPE 78.112385 Micrometer Gage,Range 1.400 to 1.600" - TESA BROWN & SHARPE 78.112385. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- STARRETT 234MA-175 End Measuring Rod,9.5mm,w/Rubber Handle - STARRETT 234MA-175. Insulated handles minimize expansion by heat when held in the hand. Diversion contrary to U.S. law is prohibited. Power adapters and other modifications may be necessary for proper operation in other countries.
- Mitutoyo 117-107 Universal Micrometer 1" Range 0.0001" - If you are not able to pick up locally, we are able to get competitive freight quotes as well.
- Brown and Sharpe 599-288-1 Micrometer Head 25mm Range - If you are not able to pick up locally, we are able to get competitive freight quotes as well.
- 2 Vintage micrometer standard gauges, 1.00" and .875"
- 182-107, Steel Rule, 6"/150Mm ( 1/10, 1/100", 1Mm, 0.5Mm), 3/64" Thick X 3/4" Wi - Material Stainless Steel. Tempered stainless steel. Color Clear. We're happy to help. We do not accept P.O. Boxes. USE EASY TO USE. New Arrivals.
- 182-207, Steel Rule, 6" X 150Mm, (1/10, 1/100", 1Mm, 1/2Mm), 1/64" Thick X 1/2" - Style Steel Rule, 182-207. Material Stainless Steel. Tempered stainless steel. Color Clear. Clear easy to see graduations. We're happy to help. We do not accept P.O. Boxes. USE EASY TO USE.
- Starrett .001" Interchangeable Anvil Micrometer Set 2" To 6" 224ARLZ - Starrett .001" Interchangeable Anvil Micrometer Set 2" To 6" 224ARLZ. With original box and all paperwork. Free shipping.
- Mini Universal Flexible Micrometer Base Holder Stand for Clamping Micrometer - We'd like to settle any problem in a friendly manner. Made of bearing steel (GCr15), sturdy and stable. Material: Bearing Steel (GCr15). Because the unpaid dispute will not be closed automatically, and we may ignore it.
- Starrett 436 Series 6-piece SAE Mechanical Outside Micrometer Set - 436 Series™ 6-piece SAE Mechanical Outside Micrometer Set (ST436.1CXFLZ) by Starrett®. The Starrett S436.1 Outside Micrometer Set includes 1", 2", 3", 4", 5", 6" micrometers, five standards, adjusting wrench, in case. The most popular precision micrometers used by skilled workmen worldwide. Anvils sized at .250" (6.35mm) diameter for ease of use on larger work. This model features 0-6" Measuring Range. Smooth friction thimble for uniform pressure, the combination ratchet and speeder for uniform pressure and quicker adjustment, or a plain micrometer that depends on your own feel. Recommended for mechanics, automotive service and machine shops, toolrooms, inspection departments and wherever gaging involves a wide range of measurements. SET, 0-6", .0001" Grad, Carbide Faces, Friction Thimble, Lock Nut involves a wide range of measurements.
- Starrett 5004 Series 0 to 16" SAE & Metric Digital Depth Gauge - 5004 Series™ 0 to 16" SAE and Metric Digital Depth Gauge by Starrett®. The Starrett 5004 Electronic Depth Gage is ideal for large part measurements. Gage features three movable bridge attachments that provide additional large part measurement capacity. This model provides 0-16" (0-400 mm) range. 0-16" (0-400 mm) Range, With RS232 Data Transmission Port.
- Mitutoyo 156 Series 0 to 4" SAE & Metric Adjustable Angle Micrometer Stand - 156 Series™ 0 to 4" SAE and Metric Adjustable Angle Micrometer Stand by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 112-237CAL Point Micrometer with Calibration, Inch, Ratchet Stop, 30 Deg. Carbi - Eaton Aeroquip Fj3055-04-0810S Female O-Ring Hose Fitting,10 Dash. Te-Co 33823 Edge Clamp,Low,1-1/2,3-7/8,7/8,1/2. Eaton Aeroquip 2080-12-12S Adpt,Fnpt,3/4-14,Cross. General Purpose. Electrical Boxes.
- Scherr Tumico 25-50mm 0.01mm Hub Micrometer - Scherr Tumico 25-50mm 0.01mm Hub Micrometer. - Range 25mm-50mm- Resolution 0.01mm- Ratchet Thimble for repeatable measurements.- Knurled Spindle Stop/Lock Ring- Carbide Tipped Anvil and Spindle- Made in USAHas engravings in multiple spots (see pictures) Appears to be in great shape.Please feel free to contact me for more information or pictures. Thank you for looking!
- MITUTOYO 122-101 BLADE MICROMETER 0-25mm 0.01mm EXCELLENT SHAPE!! - MITUTOYO 122-101 BLADE MICROMETER 0-25mm 0.01mm EXCELLENT SHAPE!!. - 0-25mm range- 0.01mm resolution- ratchet thimble for repeatable measurements- 0.75mm Blade thickness at the thinnest part- Has engraving on one side of the body from previous ownerThe micrometer is in a very good shape and very clean. Please reach feel free to reach out with any questions. Thanks for looking!
- VINTAGE STARRET MICROMETER CALIPER #436, 2 in w/ ORIGINAL BOX, - VINTAGE STARRET MICROMETER CALIPER #436, 1 in w/ ORIGINAL BOX, FREE SHIPPING.
- 103-931 outside Micrometer Set with Standards, 0-4" Range, 0.0001" Graduation (4 - Supplied with Standards. Clear graduations on satin finish. Finish Type Satin. Item model number 103-931. Add To Favorites. We will work with you to resolve any problem you may have.
- 3 Starrett PT99331 Depth Rods for 440 Series Depth Micrometer OAL 4.9, 5.9, 6.1"
- 0-13mm Micrometer Flat Ball Head For Fine Tuning Of Various Accuracy Instruments - Optional Style: Flat Head, Flat Head with Nut, Ball Head, Ball Head with Nut. Feature: 1. Accuracy design, high accuracy and easy to use. Accuracy: 0.01mm. If you do not receive our reply within 48 hours, pls.
- Starrett T436.1XRL-1 Outside Micrometer, 0-1" Range, .0001" Graduation - This Starrett T436.1XRL-1 Outside Micrometer is designed for precision measurement of objects with a range of 0-1\". The mechanical reading allows for accurate results, while the .0001\" graduation ensures high resolution. Comes with 0-1 od micrometer, hard protective case, 1” standard for calibration check, and adjustment tool.
- Starrett No. 436 Outside Micrometer 2-3", .0001 Graduation USA Ratchet Stop - This high-quality Starrett No. 436 Outside Micrometer has a 2-3" measurement range and a .0001" graduation, making it perfect for precise measurements in industrial and manufacturing settings. Made in the USA, this mechanical micrometer features a ratchet stop for consistent measurement and a resolution of .00010" and comes with a 2” standard for calibration.
- Mitutoyo 229-131 0-4" Digital Depth Micrometer Mic 4” Base Made In Usa - This Mitutoyo 229-131 depth micrometer is a precision measuring tool made in the United States. The micrometer has a mechanical reading system with a resolution of 0.00100 inches. It has a maximum measurement of 4 inches and a minimum measurement of 0 inches. The micrometer is designed to measure the depth of holes, slots, and other features in metalworking applications. The micrometer base is 4 inches long, and the micrometer is suitable for use in CNC, metalworking, and manufacturing. The brand Mitutoyo is well-known for its high-quality precision measuring tools.
- Starrett No. 436 3"-4"Inch Outside Mic (Ratcheting Thimble) .0001” w/4” Standard - This Starrett No. 436 Outside Micrometer (with Ratcheting Thimble) is a precision measuring tool that can measure minimum and maximum measurements between 3" and 4". Made in the United States, this mechanical micrometer has a resolution of 0.00010 inches. Ideal for use in the metalworking industry, this micrometer is perfect for measuring machined parts and other components. Its brand name, Starrett, is well-known for producing high-quality precision measuring tools. This micrometer also comes with a 4-inch standard and is suitable for both professional and personal use.
- Mitutoyo 331-352-30 Spline Micrometer, 1-2"/25.4-50.8mm Range, .00005"/0.001mm
- Brown & Sharpe 2-3" Carbide Tipped Outside Micrometer .0001" Machinist Tool - You will receive the exact item pictured in used condition with ID engravings. 0.0001" Graduations clearly visible with working lock and includes case.
- DIAS Plus Sensor-Control 41259 | MSC 41259 DIAS PLUS SENSOR CONTROL 1659059 - To view this page, enable Ja. Item location: L Bay/ SH 1.
- Mitutoyo Digimatic Micrometer 293-244-30 MDC-25PXT Vernier Caliper Gauge Scale
- Digital Micrometer 0-25mm Electronic Digital Outside Micrometer 0.001mm Y4G2 - Display Type: Digital display. Resolution: 0.001mm / 0.00005in. Accuracy: 0.002mm / 0.0001in. Unit Switching: mm, in. Item Size: 160 65 27mm / 6.30 2.56 1.06in.
- LAPMASTER FLATNESS GAGE Gauge - LAPMASTER FLATNESS Gauge. Free priority mail shipping in the U.S. Thank you for looking.
- S-T Industries outside Micrometer #5 Mandrel Assy 7" long *Replacement Part* kit
- Brown & Sharpe No. 76 Outside Micrometer 11-12" Range - vintage ri usa ratchet - Brown & Sharpe No. 76 Outside Micrometer 11-12" Range - vintage ri usa ratchet.
- STARRETT 10-11 Inch MICROMETER No. 436 Vintage Machinist Tools - STARRETT 10-11 Inch MICROMETER No. 436 Vintage Machinist Tools.
- S-T Industries outside Micrometer #4 Mandrel Assy 6" long *Replacement Part* kit
- New Mitutoyo Surftest Sj-210 Portable Surface Roughness Tester 178-561-02A. - SURFTEST SJ-210 SERIES PORTABLE SURFACE ROUGHNESS TEST. MITUTOYO 178-561-02A. STYLUS ALARM: WARNS YOU WHEN THE CULMULATIVE. STANDARD DRIVE UNIT.
- Mitutoyo 0-6" DIGIT Micrometer 204-137 Anvils 0.0002" Japan 104-137 - A more precision version of the 104-137. My guess is it is from the 80's as it is not in a wooden box but a plastic box. It is complete and working perfectly. They are all fully functional. I did not clean them as I do not want to hurt the functionality.
- ETALON INDICATING MICROMETER - 1" to 2" - 0.0001" - Made in Switzerland by Etalon. Made in Switzerland to highest precision and quality standards. -Ref 129-31.
- S-T Industries outside Micrometer #3 Mandrel Assy 5" long *Replacement Part* kit
- Micrometer Range Is 0 To 1 "accuracy Is 00005" with LCD Reading and Storage Box - Manufacturer Part Number. Assembled Product Weight. WEN Products.
- S-T Industries outside Micrometer #2 Mandrel Assy 4" long *Replacement Part* kit
- S-T Industries outside Micrometer #1 Mandrel Assy 3" long *Replacement Part* kit
- Vintage Fowler/Helios 0-1" .0001" micrometer and case. - This vintage micrometer from Fowler/Helios is a rare find for metalworking enthusiasts. With precision up to .0001\", this tool is a reliable addition to any workshop. The sleek case that comes with it ensures easy storage and transportation, making it perfect for on-the-go projects. The brand of this micrometer is Fowler, known for its high-quality tools in the metalworking industry. This particular micrometer has a measurement range of 0-1\", making it ideal for precise measurements on small objects. Whether you are a professional or an amateur, this micrometer is a valuable tool to have in your collection.
- S-T Industries outside Micrometer #0 Mandrel Assy 2" long *Replacement Part* kit
- Starrett screw thread micrometer - Starrett screw thread micrometer, 22 to 30 thread
- 5-6" Outside Micrometer 0.0001" Carbide Tipped Precision Micrometer New - Description: 5-6" x 0.0001" precision outside micrometer. carbide tipped measuring face ratched stop. lock nut. 0.0001" graduation reading Brand marddpair MPN AMZ482761 UPC Does not apply Micrometer Type Outside Micrometer Maximum Measurement 6 in Reading Mechanical Minimum Measurement 5 in Resolution 0.00010 in Feature ESCP.
- Kunkel Micrometer Made in Germany in Original Wooden Box - In good working order.
- 5-6" Outside Micrometer 0.0001'' Premium Precision Carbide Tips Machinist - Description: 5-6" x 0.0001" precision outside micrometer. carbide tipped measuring face ratched stop. lock nut. 0.0001" graduation reading Brand yibei-tech MPN YI78589 UPC Does not apply Micrometer Type Outside Micrometer Maximum Measurement 6 in Reading Mechanical Minimum Measurement 5 in Resolution 0.00010 in Feature ESCP.
- 5-6" Precision Outside Micrometer 0.0001" Carbide Tipped,Standard - Description: 5-6" x 0.0001" precision outside micrometer. carbide tipped measuring face ratched stop. lock nut. 0.0001" graduation reading Brand autoooparts MPN APO89816 UPC Does not apply Micrometer Type Outside Micrometer Maximum Measurement 6 in Reading Mechanical Minimum Measurement 5 in Resolution 0.00010 in Feature ESCP.
- Starrett No. 445 Depth Micrometer
- Micrometer G.L. Great Lakes No. 85 Vintage Machinist Tool Made in USA - Neat vintage micrometer. Works. Has some signs of wear and grime.
- MITUTOYO # 293-711 Electronic Digital Micrometer, 0" - 1", X .00005" & .001 mm - MITUTOYO # 293-711 Electronic Digital Micrometer, 0" - 1", X .00005" & .001 mm. Condition is Pre Owned still in great shape and works great. Please look closely at the pictures for condition. Thank You for looking.
- Mitutoyo 510-107 2-3" Indicating Micrometer Machinist Tool Maker Inspection
- VIS Poland 0-1” Indicating Micrometer Comparator Machinist Tool Maker Inspection
- FOWLER / VIS 0-1” .0001” INDICATING MICROMETER COMPARATOR Machinist Tool Maker - FOWLER (VIS) 0-1” .0001” INDICATING MICROMETER COMPARATOR made in POLAND Machinist Tool Maker Box Find. Condition is Used. Shipped with USPS Priority Mail.Actual item pictured.Be sure to view our other items for more great tooling finds.
- FOWLER / VIS 0-1” .0001” INDICATING MICROMETER COMPARATOR Machinist Tool Maker - FOWLER (VIS) 0-1” .0001” INDICATING MICROMETER COMPARATOR made in POLAND Machinist Tool Maker Box Find. Condition is Used. Shipped with USPS Priority Mail.Actual item pictured.Be sure to view our other items for more great tooling finds.
- FOWLER / VIS 0-1” .0001” INDICATING MICROMETER COMPARATOR Machinist Tool Maker - FOWLER (VIS) 0-1” .0001” INDICATING MICROMETER COMPARATOR made in POLAND Machinist Tool Maker Box Find. Condition is Used. Shipped with USPS Priority Mail.Actual item pictured.Be sure to view our other items for more great tooling finds.
- Starrett 823FZ 53058 Tubular Inside Micrometer Set 1.5"-32" Range .001" Grad - This Starrett 823FZ 53058 Tubular Inside Micrometer Set is perfect for precise measurements in the metalworking industry. With a range of 1.5 inches to 32 inches and a graduation of .001 inches, this set is ideal for accurate measurements of the inner diameter of cylinders and pipes. The set includes a set of rods and a tubular frame that allows for easy insertion and removal of the rods. The Starrett brand ensures the highest quality materials and craftsmanship, making this set a reliable addition to any metalworking toolkit. Used but I’m very good working condition.
- Brown And Sharpe 9-10" Micrometer - BROWN AND SHARPE 9-10" MICROMETER.(B31-56)
- Mitutoyo 193-211 Digit Outside Micrometer, Inch, Friction Thimble, 0-1'' Range, - Mitutoyo 193-211 Digit Outside Micrometer, Inch, Friction Thimble, 0-1'' Range,. Great condition Little bit of wear on the back of it but other then that great. As is and comes with what’s pictured.
- Mitutoyo 342-271 0 Crimp Height Type Digital Micrometers from Japan F/S NEW
- Craftsman Depth Gage Micrometer - Craftsman Depth Gage Micrometer. Used in good condition Check the picture so let me look up questions
- Beecher Electronics MicroArray w/ 2 Starrett - If it is not pictured that it is not included. 23410 Snook Ln. Houston Liquidator LLC. "The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
- Starrett 436 1-7/8 2-7/8 Micrometer - Starrett 436 1-7/8 2-7/8 Micrometer. Nice marking here it works fine turns nice and smooth Let me know if you have questions free shipping
- Vintage Starrett Micrometer 0”-4” & 2-436 1"-2" - VINTAGE STARRETT MICROMETER 0”-4” & 2-436 1"-2". Used in good condition they worked fine Let me know if you have a questions
- Vintage Starrett 3" - 4" Micrometer No. 436 Made in USA - Made in USA!
- TESA MICROMETER 100-200mm - (50mm is missing).
- Depth Micrometer, CRAFTSMAN 0 - 3" Machinist Depth Micrometer, .001", USA - Made in USA.
- Brown & Sharpe No. 54, 0 - 4" Machinist's Micrometer Set, & Wooden Storage Box - Brown & Sharpe, Providence, R.I. Original Wooden Storage Box. 0 - 4" Range.
- STARRETT No.436 (2" in. to 3" in Range) Machinist Micrometer (.001"), USA - Starrett, Athol Ma., USA. Model No. 436 (2 - 3") Range. Made in USA.
- Micrometer, J.T. Slocomb Co. 2 - 3" Vintage Micrometer, U.S.A. Tool - This Tool is in good used working condition and will be a nice addition to your Collection.
- Micrometer, GOODELL-PRATT Vtg. 0 - 1" Micrometer, Steel Faces, .001", USA - Steel Faces. Made in USA.
- Brown & Sharpe No. 19 Vtg. Machinists (0 - 1") Micrometer, .001 Steel Faces, USA - Steel Faces. Model 19. Made in USA.
- M. G. TOOL CO. Machinist's 1" - 2" Micrometer, .001", Steel Faces, N.Y., USA - Steel Faces. Made in USA. Tool is in good used working condition.
- Micrometer, Machinists .0001" Grads., 0 - 1" Range Micrometer & Wooden Box - 0 - 1" Range. Nice Storage Box. Ratchet Stop.
- FOWLER 0 - 1" Machinists Flange Micrometer (.001"), Made in Japan - For your Consideration is this FOWLER. Made in Japan. Tool is in good used working condition.
- Vintage 3-4" Outside Diameter Micrometer Starrett No: 436RL New Old Stock
- Micrometer, 0 - 1" (.0001") Carbide Faces, Spindle Lock, Ratchet Stop Micrometer - Ratchet Stop. Spindle lock. Wooden Storage Box included.
- J.T. SLOCOMB (0 - 1") Machinists Micrometer, .001", Steel Faces, USA - Providence, R.I. U.S.A..
- Brown & Sharpe No. 47 (1 - 2") Outside Micrometer .001", pat'd Dec. 30, 1902 USA - Spindle Lock.
- Micrometer, 0 - 25mm (.01mm) Carbide Faces, Spindle Lock Ratchet Stop Micrometer - Ratchet Stop. Spindle lock. For your Consideration is this 0mm - 25mm. Reads in. 01mm.
- FEDERAL PRODUCTS (200-P-1) 0 - 1" Range Indicating Micrometer, (.0001"), USA - For your Consideration is this FEDERAL PRODUCTS (200-P-1). Made in USA.
- Micrometer, Tubular Micrometer Co. 2 - 3" Micrometer, .001" Steel Faces, USA - Steel Faces.
- Brown & Sharpe 4" - 5" Micrometer, .0001", Thimble Stop, Spindle Lock, Carbide - Thimble Stop. For your Consideration is this Brown & Sharpe. Spindle Lock.
- Mitutoyo Disc 3-4" Micrometer 123-128 - Mitutoyo Disc 3-4" Micrometer 123-128.
- Contrologic, Inc LASER Micrometer Si 2100X w/Si ALB Audible Visual Alarm - Used Contrologic, Inc laser micrometer in good condition. These came from an operating line that was taken out of service due to age. They were working until uninstalled. I did not see them working. Selling them at parts or repair prices. No way to test or knowledge of the operations. Look at pics for condition and description: What is pictured is exactly what you will receive. Sold AS IS with no returns. Feel free to check our feedback and stop by our eBay store. Please check for cheapest shipping method offered to your location before payment.
- Beta LaserMike 163-100-05 LASER Micrometer & LaserMike 1000 - Used BETA LaserMike 163 and 1000 in good condition. These came from an operating line that was taken out of service due to age. They were working until uninstalled. I did not see them working. Selling them at parts or repair prices. No way to test or knowledge of the operations. Look at pics for condition and description: What is pictured is exactly what you will receive. Sold AS IS with no returns. Feel free to check our feedback and stop by our eBay store. Please check for cheapest shipping method offered to your location before payment.
- Starrett 575EP 0-1", 28-30 TPI, Double V-Anvil Screw-Thread Micrometer. Tested! - Starrett 575EP. 0-1" Range, 28-30 TPI, Double V-Anvil.
- Vintage Craftsman Vernier Calipers 7" Stainless Steel, Made in Germany, #40162 - Model #40162. (Copy & Paste in Google or Your Browser). Made in Germany. In Excellent Working condition. The item(s) in the pictures are exactly what you will receive.
- Starrett No. 230 (230P) 0-1" .001 Outside Micrometer Satin-Chrome w/ Box MINT - Starrett No. 230 (230P) 0-1" .001 Outside Micrometer Satin-Chrome w/ Box MINT. Very small signs of age, works perfectly spins smooth, please see photos for details. Tiny amount of oxidation on handle.
- Starrett 575FP 0-1", 32-40TPI, Double V-Anvil Screw-Thread Micrometer. Tested! - Starrett 575FP. 0-1" Range, 32-40TPI, Double V-Anvil.
- Mitutoyo 293-344-30 IP65 Coolant Proof Micrometer 0-1" .00005" - Mitutoyo 293-344-30 IP65 Coolant Proof Micrometer 0-1" .00005". Tool comes complete in original case with original tool and paperworks. Tool will need a battery and calibration but is guaranteed functional. Tool is in excellent preowned condition showing no wear from use. Please refer to the pictures provided in this listing as item pictured is exact item you will receive. Please take advantage of this great “buy it now” deal that includes fast and free USPS shipping.
- Telescopic Gauge Set 8Mm-150Mm Adjustable Inner Diameter Gauge 6Pcs Telescopic
- The L.S. Starrett Co. No. 823C Inside Micrometer 4" - 24" W/ Wooden Case - The L.S. Starrett Co. Model: No. 823C. With Original Wooden Case. The item is exactly as pictured. 4-24" Range.
- Lufkin Rule No. 1917 Mechanical Outside Micrometer 6-7" .001" Graduation - .001" Graduation. Model: No. 1917. Condition: Used. 6-7" Range.
- The L.S. Starrett Co. No. 436 4-5" Outside Micrometer Friction Thimble .0001" - The L.S. Starrett Co. Friction Thimble. Model: No. 436. The item is exactly as pictured. 4-5" Range.
- Brown & Sharpe No. 153 Screw Thread Micrometer NS&V 14-20 0-1" - Model: No. 153. Screw Thread. 0-1" Range.
- The L.S. Starrett Co. No. 436 3-4" Outside Micrometer Friction Thimble - The L.S. Starrett Co. Friction Thimble. Model: No. 436. The item is exactly as pictured. 3-4" Range.
- Smiec Micrometer
- Micrometer In Wooden Box, 4 1/2" Long, Box 5"
- Starrett No. 436-1 Micrometer Machinist Tool USA 0.0001 resolution
- Vintage Starrett 210A-P Point Micrometer (0-7/8”) - The total working range is 7/8”.
- Vintage Lufkin No. 2611 Micrometer 0 To 1.0" Round Anvil - ENGRAVINGS on one side as shown.
- Vintage Lufkin 0-1" Micrometer. Model 1641. Great Condition. Made in USA - Model 1641. Great Condition. Made in USA.
- Brown & Sharpe No. 61 Outside Micrometer 1" - 2" .001" Graduations
- Vintage 203F Micrometer The LS Starrett Co. Athol Mass USA in Working Condition - Vintage 203F Micrometer The LS Starrett Co. Athol Mass USA in Working Condition. Turns very smoothly. See pictures for details and feel free to ask questions before purchase. Please check out my other items. Thank you!
- Digital Micrometer with Case -Metric & SAE- Item #63647 (219613-1) - Zoom in for a better look!
- LUFKIN # 1912 Micrometer, 1" - 2" Range Smooth Movement nice - LUFKIN # 1912 Micrometer, 1" - 2" Range Smooth Movement nice. Turns very smoothly. See pictures for details and feel free to ask questions before purchase. Please check on weather items. Thank you!
- Lufkin No. 680 Inside Micrometer Body - Excellent Condition - 1 1/2"-2" Range
- Starrett no.124 A/B inside micrometer set 2-8 inches
- Starrett no.124 A/B inside micrometer set 2-12 inches
- Starrett no.124 A/B inside micrometer set 2-12 inches
- Starrett no.124 A/B inside micrometer set 2-12 inches
- Mitutoyo 293-721-30 Digital Outside Micrometer 0-1" .00005" 0.001Mm (Ao2080149) - INCLUDES ORIGINAL CASE! NO OTHER ACCESSORIES INCLUDED! It may or may not include the original box. Flat Screen TVs, Playstation 4, XBox One, Jewelry, Blu-Ray Players. buyback program. You can save big money buying pre-owned jewelry!
- Mitutoyo Outside Micrometer M110-50 (103-138) - [ Li-ion Battery ]. [ Multiple sizes and colors ]. Japan Usage Item. [ Electronics ].
- Starrett No. 701B Inside Micrometer 1.5” To 2.5” Range USA Made - Starrett No. 701B Inside Micrometer 1.5” To 2.5” Range USA Made. New old stock Condition. Check the pictures for more details. Shipped with priority mail package.Note : check my other listing for starrett no. 701A , I will combine shipping.
- WESTWARD Digit Counter Outside…WESTWARD Digit Counter Outside Micrometer
- MITUTOYO GROOVE MICROMETER NO. 146-108 2"-3" Machinist Tool Maker Box Find
- SPI .350-.425" Inside Bore Micrometer Machinist Tool Maker Gage Holtest Intrimik
- Mitutoyo 0-1” .0001” Indicating Micrometer Comparator Machinist Tool Maker Inspe
- 0-1” Starrett Screw Thread Micrometer 575D-P V UN 32-40 Pitch TPI Machinist Tool
- FOWLER / VIS 0-1” .0001” INDICATING MICROMETER COMPARATOR POLAND Machinist Tool - Condition is Used. Thread mill in pictures is NOT INCLUDED, just used as an example.
- Mitutoyo 143-121 Outside Micrometer 0-1" Caliper Type .001 Machinist Tool Maker - Actual item pictured.
- Mitutoyo 143-122 Outside Micrometer 1-2" Caliper Type .001 Machinist Tool Maker - Actual item pictured.
- MITUTOYO 101188 Point/M7 - MITUTOYO 101188. Point/M7, Case Type case, Compatible with Manufacturer Model No. Power adapters and other modifications may be necessary for proper operation in other countries. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Starrett 263 Micrometer Head 0-1" Range - .001" - Will combine shipping. c3
- Mitutoyo digital caliper 200mm Mitutoyo CD-20CX Japan
- STARRETT T436.1XFL-3 Outside Micrometer,2 to 3",Knurled Ring - STARRETT T436.1XFL-3. Grainger reserves the right to accept or reject any order. Vernier ratchet is used to stop or friction thimble for exact, repetitive readings. Includes a standard bar except for 0" to 1" and 0 to 25mm models.
- INSIZE 3590-257E V-Anvil Micrometer,V-Shaped Anvil - INSIZE 3590-257E. Governing Law; Limitations. Diversion contrary to U.S. law is prohibited. Country of Importation and Anti-diversion. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- Mitutoyo 103-930 Outside Micrometer Set, 0-4" Range, 4 Piece Set - Mitutoyo 103-930. Display Type Non-Digital. Clear graduations. Model:103-930 | Order No:103-930. Local pick up is not available. Model: 103-930. Order No: 103-930.
- Outside Micrometer 5-6" 0.0001'' Premium Precision Carbide Tips Machinist - Description: 5-6" x 0.0001" precision outside micrometer. carbide tipped measuring face ratched stop. lock nut. 0.0001" graduation reading Brand Handdo MPN 460307 UPC Does not apply Micrometer Type Outside Micrometer Maximum Measurement 6 in Reading Mechanical Minimum Measurement 5 in Resolution 0.00010 in Feature ESCP.
- New 5-6" Precision Outside Micrometer 0.0001" Carbide Tipped - 5-6" x 0.0001" precision outside micrometer. carbide tipped measuring face ratched stop. lock nut. 0.0001" graduation reading Woth 2" standard. Brand Thomletha MPN GM449080 UPC Does not apply Micrometer Type Outside Micrometer Maximum Measurement 6 in Reading Mechanical Minimum Measurement 5 in Resolution 0.00010 in Feature ESCP.
- Vintage Starrett O.d. Calipers 3 Pcs. - ALL IN GOOD CONDITION.
- Vintage Starrett O.d. & I.d. Calipers And Divider 3 Pcs. - ALL IN GOOD CONDITION.
- Vintage Starrett O.d. & I.d. Calipers And Divider 4 Pcs. - ALL IN GOOD CONDITION.
- MITUTOYO No 129-128 Depth Micrometer DMC 2.5-6'' with Wooden Case, Made In Japan
- Vintage BROWN & SHARPE No.650 Center Gage - Brown & Sharpe Center Gage. Up for your consideration is a very fine condition Center Gage from B & S. NO PREVIOUS OWNER ID MARKINGS. You get EXACTLY what you the pictures.
- Vintage Starrett Co. No 3 Micrometer Felt Lined Jeweler Box Accurate & Function - VINTAGE STARRETT CO. NO 3 MICROMETER FELT LINED JEWELER BOX ACCURATE & FUNCTION.
- Set of 5 Mitutoyo calipers Japan - Mitutoyo vernier caliper 5 points. The outer box is dirty and has scratches.
- Craftsman machinist Micrometer 0-1 inches .0001 made in USA with 40442 depth ga - Craftsman machinist Micrometer 0-1 inches .001 made in USA.
- Multifunctional Micrometer for Head 13mm Round for Head with Nut Micrometer for - Type(90° angled direction): Left Angled/ Right Angled (Optional). Angle: 90°. Plug and for play, support high speed data rate. Convenient way to changing cable connections. Portable design, light weight, easy to carry and install.
- Internal meter - CARL ZEISS - JENA - 32-50 mm - 0.002 mm
- 0-4/0.0004" Premium Outside Micrometer Set Machinist Tool Precision Carbide Tips - Relax to the right and lock to the left. Accuracy: 0.01mm/ 0-0.0004". Due to light and screen difference, the item's color may be slightly different from the pictures. Range: 0-100mm/ 0-0.4". Our warehouse is located in US.
- Mitutoyo 0-25, 0.01mm Mechanical Outside Micrometer M210-25 - Mitutoyo 0-25, 0.01mm Mechanical Outside Micrometer M210-25. Tool comes in original box with accessories and paperwork. Excellent condition.
- Mitutoyo 342-271 0 CHM-20MX Crimp Height Type Digital Micrometers With Tracking
- 0-25mm Electronic Digital Micrometer 0.001mm Thickness Gauge And Wrench Set - The two modes read the data, even if it is not powered, it will not affect the use. Benchmark rod: No. 1 Wrench. With data holding function, easy to read data. Supports data conversion in mm/in units, you can get data as needed.
- BROWN & SHARPE INTRIMIK INSIDE BORE MICROMETER - 0.500" to 0.600" - No engravings at all. Made in Switzerland by Brown & Sharpe. Graduation Reading: 0.0002".
- Vintage M & W Micrometer - moore & Wright - original box and case - Vintage M & W Micrometer - moore & Wright - original box and case Original box and leaflet Please see pictures Item will be shipped by next day by Royalmail recorded post UK & Worldwide I happy to combine shipping to save on postage cos ats Buyer pays return costs Condition please see photographs click to enlarge.
- Vintage M & W Micrometer - n0 965 -moore & Wright - original box and case - Vintage M & W Micrometer - n0 965 -moore & Wright - original box and case Original box Please see pictures Item will be shipped by next day by Royalmail recorded post UK & Worldwide I happy to combine shipping to save on postage cos ats Buyer pays return costs Condition please see photographs click to enlarge.
- Mitutoyo CLM1-15QMX 227-201-20 soft touch micrometer Japan - From JAPAN. Condition : NEW.
- Digital Micrometer Caliper Electronic Thickness Gauge Tester 0-12.7mm 0.001mm - Accuracy:+/- 0.005mm;. Thread: M2.5;.
- Micrometer Digital Mitutoyo 422-411-20 BLM-30QMX - Micrometer Digital Mitutoyo 422-411-20 BLM-30QMX.
- Starrett No. 436-1 Micrometer Machinist Tool USA 0.0001 resolution - Starrett No. 436-1 Micrometer Machinist Tool USA 0.0001 resolution. Dial is very smooth. There is wear from use but it works as expected.Lock nut is missing.
- Fowler Bowers XT3 Holematic Pistol Grip Digital Bore Gauge 5-6" XTPG04-XT3 IP67 - • IP67 electronics. Item Details. • Supplied in fitted wooden case. • Range 2-300mm (0.080"-12"). • UKAS certificates supplied as standard with all gauges. • UKAS certificates supplied as standard with all setting rings.
- Mitutoyo 103-220A Micrometer, 5-6" Range, .0001" Graduation
- Microscope Correction Ruler Optical Micrometer Correction Sheet Precision IS5 - 1 Microscope correction ruler. line width 0.03mm-0.2mm. Inspection of foreign bodies and scratches on the surface of electronic products. The the surface wire, the printing position and the size of the electronic product are inspected.
- KUNKEL Micrometer 50mm - 75mm, with gauge, tools, and box - KUNKEL Micrometer 50mm - 75mm, with gauge, tools, and box.
- VINTAGE MILLERS FALLS MICROMETER No. 112R MADE IN USA - VINTAGE MILLERS FALLS MICROMETER No. 112R MADE IN USA. Good shape. Works like it should.
- 4Pcs 0-4" Outside Micrometer Precision 0.0001" Carbide Tipped - Description: This precision outside micrometer set has Crisp, clear, easy-to-read graduation, and accurate to .0001". With durability and accuracy Hardened and ground spindle with carbide anvil, This set will Comes in a padded case with standards and calibration wrench. Features: Carbide Measuring Face Super Hard Carbide Tipped Anvils Graduations: 0.0001" with Vernier Scale Complete with calibration standards and wrenches ratched stop; lock nut, Ratchet Thimble Handle for precise application of force. Solid, Long Lasting Accuracy with Cast Steel Frame - Powder Coated Baked Finish Laser Etched Graduations will never fade .
- Mitutoyo 129-132 Depth Micrometer DMC4-4 0-4" w/ 4" Anvil - Depth Mic
- Mitutoyo 141-133 Inside Micrometer Set 2”-12” Range .001" Grads, w/Wood Box - Condition Notes: We primarily deal in industrial surplus.
- Brown And Sharpe 11-12" Micrometer - BROWN AND SHARPE 11-12" MICROMETER missing rods for shorter lengths.(B31-49)
- Vintage Brown & Sharpe No. 600 Vernier Depth Gauge 5” - Vintage Brown & Sharpe No. 600 Vernier Depth Gauge 5”.
- Mitutoyo Depth Micrometer Wood Case With 1-6” Rods and Groove Measuring Rods - Condition Notes: We primarily deal in industrial surplus.
- Starrett 93B T-Handle Tap Wrench, 7/32" - 7/16" Tap Size, 5/32" - 1/4" Square - They are designed to hold square shanks. Round shanks can be gripped, but care must be used. Designed to hold square shanks. Sliding Handle. Heat treated. Body is centered.
- Vintage L.S. Starrett No. 440-A Depth Micrometer USA - Vintage L.S. Starrett No. 440-A Depth Micrometer USA. Reads .001” off on a surface plate. 0-1 rod has been ground to a point.
- Millers Falls No. 31 3" Depth Micrometer Made in USA - Millers Falls No. 31 3" Depth Micrometer Made in USA.
- Lot Of Vintage Micrometers Starrtett Mitutoyo J.t Slocomb - LOT OF VINTAGE MICROMETERS STARRTETT MITUTOYO J.T SLOCOMB. All have signs of wear. Some screws have a little play. All the big ones are J.T slocomb. From 0-8” only one missing is a 3-4”
- Mitutoyo Micrometer 0.0001 Inch - Digital Display Readout - New In Box - New In Box.
- SPI 17-826-9 Digital Depth Micrometer 0-6" New IP65 SPC Output Machinist Tool - SPI 17-826-9 Digital Depth Micrometer 0-6" New IP65 SPC Output Machinist Tool. SPI IP65 Electronic Depth Micrometer0-6" Range, 4" Base LengthIP65 dust and water protectionRatchet stopInch/Metric absolute and incremental dataResolution: 0.00005"/0.01mmAccuracy:- ±0.0002" up to 6"- ±0.00028" over 6"SPC/USB data outputAutomatic shut-offBattery: 357/303 includedFlat end rodsShort Form Certificate of Calibration includedFurnished in fitted caseCheck other listings for New Digital Mitutoyo and Starrett Tools for significantly less than retail.
- Outside External Metric Gauge Micrometer MK 0-25mm 0.01mm USSR 1979 measuring - Outside External Metric Gauge Micrometer MK 0-25mm 0.01mm USSR 1979 measuring.
- Mitutoyo Spline Micrometer No. 111-166 - I USED THIS MIC FOR CHECKING KEYWAY DEPTHS IN SHAFTS.USED BY ME AND ONLY ME IN ONE MAN SHOP.MIC HAS BEEN CALABRATED REGULARLY.CALABRATION STICKERS CAN BE PEELED OFF. IF YOU ARE NOT SATISFIED SEND IT BACK AND I WILL REFUND YOUR MONEY ,THANKS FOR LOOKING ANDY,
- Starrett 440 Depth Micrometer 1" to 3" in Case Good Condition - This is a used tool in good condition, as pictured. Has the locking ring, no ratchet. As you can see it is engraved. $12.50 for priority mail.
- UNUSED MITUTOYO 115-153 .0001 SPHERICAL ANVIL, In Box, Original Packaging - You may see a 1" standard, a 6" rule, a 12" ruler, or a quarter, and they are NOT included in what you are buying. a pretty image. The outside cardboard wrapper is marked, but other than that it looks totally new.
- Etalon .4"-.5" Intrimik inside Micrometer ID Mike mic for parts or repair - Etalon .4"-.5" Intrimik inside Micrometer ID Mike mic. Engravings and markings everywhere. Sticks slightly when retracting at the last bit of the travel. Item 2d
- Lufkin 8pc Outside Micrometer 3-4" 4-5" 5-6" 6-7" 7- 8” 8-9” 9-10” 10-11” 11-12” - Lufkin 8pc Outside Micrometer 3-4" 4-5" 5-6" 6-7" 7- 8” 8-9” 9-10” 10-11” 11-12”.
- Vintage Starrett 1 " No 436-2" Micrometer - VINTAGE STARRETT 1 " NO 436-2" MICROMETER. Good condition, everything moves on it, ready to go.
- Pile Of Long And Short Rods For Starrett Inside Micrometer Machinist Tool - THE RODS ARE MARKED: 28-32; 20-26; 8-14; 5-6; 6-7; 3-4; 4-5. THERE ARE A COUPLE DUPLICATES. LOOK AT THE PICTURES. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. NO WARRANTIES GIVEN OR IMPLIED.
- Vintage Case Of Lufkin 12" End Measure Rods Machinist Tooling - THEY ARE ALL 12". THERE ARE SCUFFS AND SCRATCHES FROM USE. LOOK AT THE PICTURES. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION.
- Flip Out Adjustable Micrometer Work Stop Machinist Tooling Part - IT'S A LITTLE ROUGH LOOKING. I DO NOT KNOW WHAT MACHINE IT GOES TO. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION.
- Starrett No. 440 Depth Micrometer With Case And Rods Machinist Tool - THERE IS A RATCHET STOP ON IT END. LOOK AT THE PICTURES. NO EXCEPTIONS; NO MATTER HOW CLOSE YOU THINK YOU LIVE TO MY LOCATION. NO WARRANTIES GIVEN OR IMPLIED.
- Vintage Starrett No.436 2-3" Micrometer. - VINTAGE STARRETT NO.436 2-3" MICROMETER..
- 0-1" / 0.0001" Outside Disc Micrometer Graduation Flange - Graduation Flange. The item is exactly as pictured. 0.0001" Resolution / Range.
- Starrett 124 2"-32" - Starrett 2"-32" ID micrometer set with wooden box, please look at pictures. Head has "c00440" etched. Fully tested, will come with a long form calibration certificate!
- Starrett 436 1RL-1 0"-1" Outside MICROMETERS Used In Great Condition - The Starrett 436.1 Outside Micrometer features 0-1" range, .001" graduation, ratchet stop and lock nut. .001” Grad, Ratchet Stop, Lock Nut.
- Mitutoyo No: 146-104 Groove Micrometer 0" - 1" needs repair see pictures - Nice Mitutoyo No: 146-104 Groove Micrometer 0" - 1".
- Starrett 823FZ Tubular Inside Micrometer (49659530582) - Starrett 823FZ Tubular Inside Micrometer (49659530582).
- Soviet Odometer USSR/Soviet Vintage Measuring device
- Starrett 3732 Electric Digital O.D. Micrometer 3-4" Range - Starrett 3732 Electric Digital O.D. Micrometer 3-4" RangeGood working condition, lightly used. Arrives exactly as shown. 4 business day handling
- I D MIC. BROWN & SHARPE 4 1/2 - 5" INSIDE MICROMETER No. Kingstown R.I., U.S.A. - This I D Mic. has been used but it works as it should. The mic has some marks from use. The photos are of the mic that is being sold please judge it for yourself.
- General National #102 Micrometer 0-1 Inch .001" w/ Friction Thimble, Made In USA - Looks to be in good shape, turns smooth, aluminum frame, made in USA. Will bundle shipping if multiple items purchased.
- Vintage Tumico Outside Tubular Micrometer M04-4611: Chrome w Leather Case, 9 Pcs - Case shows moderate wear, but still locks. See all pictures for condition.
- Vintage 5"-6" Micrometer Caliper Outside Diameter Measuring Tool - In cases of multiples, the item will be similar.
- Starrett # 436 3 Piece Micrometer Set With Wooden Case Excellent Condition 1-3”
- 0-6"/0.0001" Precision Outside Micrometer Set W/ Carbide Tip with Wooden Case
- Nsk 711-406 Depth Micrometer 0 To 3" - In Wooden Case - Free Ship - SET IS INCOMPLETE.
- Vintage Craftsman Depth Micrometer D.J. With Wooden Case Made USA - With Wooden Case.
- Starrett No. 436 O. D,. Micrometers 0.-1 Inch .001 Been Altered For Curtain Jobs - They have been altered for special jobs. But still work good.
- Starrett micrometer head-0-1/2" - Left over from the project, never used
- Starrett No. 436 O. D,. Micrometers 0-.1 Inch .0001 Carbide Tips
- Starrett No. 210-A Point O. D,. Micrometers 0-.875 Inch .001 - They have numbers inscribed on the base.
- fowler digital micrometer depth micrometer - fowler digital micrometer depth micrometer. Slightly used fowler depth digital micrometer. Used it to read liner heights on Cummins and paccar engines. But has many uses. Used about 4 times. Reads MM's and SAE.
- Vintage Lufkin S-1921 Micrometer. 1” Saginaw, MI THE LUFKIN RULE CO. - Vintage Lufkin S-1921 Micrometer. 1” Saginaw, MI THE LUFKIN RULE CO. Comes with box, little tool, and reference cards. Please see photos. Thanks for looking
- 25/50/75/100mm 0.001mm 4-piece Set Outside Micrometer Spiral Micrometer - Do not adjust it in normal use.
- Cassens & Plath 1938 Micrometer Sextant w/Wooden Case Excellent Example WOW! NR! - The inside of the case reads "Eingetra-gene Schutz-marke" "C. Plath Hamburg Stubbenhuk 25" &. No. 1614, April 22 1938, Nr. 323, Buch. 41, Seite. Excellent example by C.Plath Hamburg. Used and in Excellent condition with scratch and scuff marks on the wood case.
- Vintage Brown & Sharpe Micrometers Lot Of 2 Made in USA - Vintage Brown & Sharpe Micrometers Lot Of 2 Made in USA.
- Sigma Koki X-Stage Linear Motion & Micrometer With Aperture - Aperture: 0.78" (1.98 cm). Height: 0.89" (2.28 cm); Height with Plate: 2.65" (6.74 cm). Plate: 3.13" x 4.20" (7.97 cm x 10.67 cm). Length x Width: 2.35" (5.97 cm). This unit will arrive in the condition shown.
- Bostitch OEM 9R200663 Depth Rod - Part No: 9R200663. Genuine, OEM Bostitch Depth Rod, part# 9R200663. Genuine, OEM Bostitch parts. (1) Depth Rod. Porter Cable. Genuine OEM. On all U.S. Orders in the lower 48. Experts are standing by to help you.
- Vintage Sears Craftsman 2" - 3" Micrometer w/ Original Box - Vintage Sears Craftsman 2" - 3" Micrometer w/ Original Box. Some cosmetic imperfections from long term storage. See photos for details and condition issues.
- 0-25mm Digital Outside Micrometer Precision 0.001mm Electronic micrometer Gauge - This gauge ranges from 0-25mm and features a lock to give you the most accurate reading. 12 Pairs Work Gloves 13 Gauge Polyester ECO Grey PU Coated Palm Safety Glove M L. Accuracy / Graduation: 0.001mm.
- General Tools Metric Micrometer 125-150Mm
- Micrometer Head Range Round Plat Type Micrometer Head Measure Tool 0-13mm - Needle Type: Round /Round with Nut / Flat / Flat with Nut. Product Range: 0-13mm.
- 123-126 Mitutoyo 1"-2" Disc Micrometer, .001", Lock, Ratchet, New In Case
- Mitutoyo Outer Diameter Micrometer, 103-141-10, 100-125 Mm, 0.01 Mm #New - 100-125 MM.
- *NEW* STARRETT DIGITAL INTRIMIK BORE GAGE MICROMETER 4 to 8 in mitutoyo spi B.S - Hi everyone. Up for sale a NEW CONDITION of STARRETT DIGITAL BORE GAGE RANGE 4 to 4 in with .00005 grad SUPER PRECISION. Items are NEW with NO signs of use, EXCEPT FOR THE 5 IN SETTING RING. THE 5 IN SETTING RING IS USED AND HAS STAINED ALL AROUND. THE 7 IN SETTING IS NEW WITH HEAVY OIL COVER TO PREVENT IT FROM MOISTURE, OTHER THAN THAT, THIS SET IS NEW AND COMPLETE. Please see pictures for clarification. If you have any concerns please drop me a line and I will respond immediately. Thanks and have a wonderful day.
- 4Pcs/Set 0-4" Outside Micrometer Precision 0.0001" Carbide Tipped New - Description: This precision outside micrometer set has Crisp, clear, easy-to-read graduation, and accurate to .0001". With durability and accuracy Hardened and ground spindle with carbide anvil, This set will Comes in a padded case with standards and calibration wrench. Features: Carbide Measuring Face Super Hard Carbide Tipped Anvils Graduations: 0.0001" with Vernier Scale Complete with calibration standards and wrenches ratched stop; lock nut, Ratchet Thimble Handle for precise application of force. Solid, Long Lasting Accuracy with Cast Steel Frame - Powder Coated Baked Finish Laser Etched Graduations will never fade .
- Mitutoyo 293-725-10 Digimatic Digital Micrometer - MITUTOYO 293-725-10 DIGIMATIC DIGITAL MICROMETER
- Micrometer, Brown & Sharpe 2 - 3" Machinists (.001") Micrometer & Storage Box - Brown & Sharpe, Providence, R.I., USA. Original Storage Container. Steel Faces.
- Chrome Plated Alloy Digital Low Error Micrometer 0.001mm Resolution 50mm~75mm - 1 x Product Certification. Resolution: 0.001mm. Error:+-0.003mm. If you do not receive our reply within 48 hours, pls. If you are satisfied with our service, pls. Reading Pattern:Digital Reading.
- 0-1" Tubing Micrometer/Tube Mircrometer 0-1"/0.0001" Carbide Tipped Spherical... - Accuracy: 0.00024""/0.006mm.
- Compact Micrometer Round Needle Type Thread Micrometer for Head Measurement - Needle type: Round. Accuracy: 0.01mm. Range: 0-25mm.
- INSIZE 6311-4 Micrometer Setting Standard, 4"
- Starret #124 2-12inch Inside Micrometer - Starret #124 2-12inch Inside Micrometer. Missing 1 rod I believe don’t know much about these ID mics other then that good condition As is and comes with what’s pictured.
- Mahr Federal 4134900 Micromar 40A Outside Micrometer, 0-1" Range, .0001" - Range: 0-1". Rapid drive with integrated ratchet.
- J.T. SLOCOMB Outside Micrometer 1-2" - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
- J.T. SLOCOMB Starrett Outside Micrometer 436 Series 2-3" - We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
- Brown & Sharpe 30-1 Micrometer Carbide Tipped Slant Line - Preowned tool that shows signs of use but remains in good condition. Engraving present on tool, shown in photos. Sticker also present on stem.
- Small Bench Micrometer Starrett Gage No. 25-T-5 .0001” - Small Bench Micrometer Starrett Gage No. 25-T-5 .0001”.
- Mitutoyo 6-7" Micrometer - Mitutoyo 6-7" Micrometer 103-221A and Standard 167-146. Small engravings but other then that great As is and comes with what’s pictured.
- Mitutoyo 6-7" Micrometer 103-221A - Mitutoyo 6-7" Micrometer 103-221A and Standard 167-146. Small engravings but other then that great As is and comes with what’s pictured.
- Mitutoyo 103-222 Outside Micrometer, 7-8" Range, .0001" Graduation - Mitutoyo 103-222 Outside Micrometer, 7-8" Range, .0001" Graduation. Small engravings other then that fantastic As is and comes with what’s pictured.
- Mitutoyo #112-225 0-1" Point Micrometer - MITUTOYO #112-225 0-1" POINT MICROMETER. Good conditionAs is and comes with what’s pictured.
- 5-30mm Internal Diameter Gage Gauge Inside Micrometer Measuring Tool Silver - 5-30mm Internal Diameter Gage Gauge Inside Micrometer Measuring Tool Silver5-30mm Internal Micrometer 0.01mm Stainless Steel Accurate Screw Gauge Metric Inner Diameter Measuring ToolFeatures:brand new and .Name: internal micrometerColor: silverMaterial: stainless steelMeasuring range: 5-30mmPrecision: 0.01 mmNote:Transition: 1cm=10mm=0.39inchPlease allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!Package Includes:1 × Inside Micrometer1 × Wrench1 × Calibration Ring1 × Packing Box
- MITUTOYO INDICATING MICROMETER - 1 inch - .0001" - 510-105 - This belonged to my grandfather who was a machinist for many years. Sold as-is!
- Outside Micrometer 0-1" Range 0001" Chrome Plate - Outside Micrometer 0-1" Range 0001" Chrome Plate.
- Micrometer 5-30mm Hole Internal Diameter Gauge 0.01mm +Case - Step2, re-align lines of fixed barrel and differential sleeve, then putratchet stop back on. Step1, useratchet stop to lock screw tightly, then use wrench to loosen theratchet stop and remove differential sleeve.
- Starrett T230XFLZ Micrometer - Starrett T230XFLZ Micrometer.
- Mitutoyo 150-208 MHN1 Micrometer Head, 0-1" Range - Mitutoyo 150-208 MHN1 Micrometer Head, 0-1" Range.
- X Micrometer Manual FinE Tuning Roller Precision Linear Stages 25mm*25mm - Table Size: 25 25mm. Rail Type: Roller Type. Precision machining and stable performance. Stroke: ± 3.2mm. Size: Approx. 50 40 15mm / 2.0 1.6 0.6in. Weight: Approx. 61g / 2.2oz.
- STARRETT 234A-6 End Measuring Rod,1/4 In,w/Rubber Handle - STARRETT 234A-6. Insulated handles minimize expansion by heat when held in the hand. Diversion contrary to U.S. law is prohibited. Power adapters and other modifications may be necessary for proper operation in other countries.
- MITUTOYO 139-201 Inside Micrometer,1.5 to 12 In - MITUTOYO 139-201. Positive-locking nut. Grainger reserves the right to accept or reject any order. Power adapters and other modifications may be necessary for proper operation in other countries. Diversion contrary to U.S. law is prohibited.
- Fowler Micrometer 0-1 inch / Model # 52-240-001
- Mitutoyo Digimatic Micrometer 293-243-30 MDC-100PX 75~100mm NEW - [Features]- Achieves the world's highest level of performance. ・Oil-resistant materials are used for all plastic parts. ・There are two types of constant pressure device: ratchet stop type and ratchet thimble type.
- Vintage LUFKIN No.755 5 inch pocket slide caliper - NICE! - These are clean and operate smooth and have NO PREVIOUS OWNER ID MARKINGS. Pocket slide caliper. You get EXACTLY what you the pictures.
- TriTan IP54 Digital 1” Micrometers W/case - TriTan IP54 Digital 1” Micrometers W/case. Lightly used as machinist lathe as a hobby.
- Vintage The Central Tool Company U.S.A. Micrometer 0-1” - Really nice vintage Central Tool company caliper with original box paperwork and accessories. Fully functional, good condition for its age. Tool works as expected.
- General / MG 0-1" Digital Micrometer Made in Japan - Original owner of this micrometer. Excellent condition and used only a few times.
- Vintage Brown & Sharpe No. 8 Micrometer 0" to 1" Machinist Tool B&S - Vintage Brown & Sharpe No. 8 Micrometer 0" to 1" Machinist Tool B&S in functional condition. Please see photos for condition or contact me if you have questions.
- 6x 5/16''-6” Precision Telescopic Micrometer T-Bore Gauge Measurement Tool cl - Precision: 0.01. Size: 20 x 16 cm. Size A: 5/16"-1/2" (8mm to 12.7cm). Size B: 1/2"- 3/4" (12.7mm to 19mm). Durable and long service life. Color: Silver. Detail Image.
- Vintage Mechanical Outside Micrometer Range 1”-2” - Made in Japan. In good working condition. See photos.
- VTG L S STARRETT CO NO. 440-B MICROMETER DEPTH GAUGE IN Brown & Sharp case - VTG L S STARRETT CO NO. 440-B MICROMETER DEPTH GAUGE IN Brown and Sharp case.
- Brown & Sharpe 0-1" Micrometer, case and wrench - Machine it fits - N/A. inventory: Box M8. Forklift loading isFREE. Depth - 5". No PO boxes.
- Mitutoyo Outside Micrometer 25mm - 50mm 0.001mm Case wrench calibration standard - Depth - 6". Machine it fits - N/A. Model - N/A. Weight - 3 lbs. inventory: Box A3. Condition - Very Lightly used. Width - 3". No PO boxes.
- Starrett 436 MRL-50 Outside Micrometer 25-50mm metric - Model - 436 MRL-50. Depth - 7". Condition - New open box. Approximate Weight - 3 lbs. No PO boxes.
- Nice Vintage Scherr-Tumico Micrometer mic - Nice Vintage Scherr-Tumico Micrometer mic
- Used Etalon Outside Micrometer 0-.800"
- Starrett 0-1" Outside Micrometer w/Starrett 1" Setting Standard - Starrett 0-1" Outside Micrometer w/Starrett 1" Setting Standard
- 0-1/2 inch Cool Weld Studios custom micrometer - They are made from suitable cores. A custom mike?. Raising the base line up enables the user to more easily take readings. The lock knob, thimble end and spinner knob are rope knurled. These are not "perfect" CNC generated tools as they are carefully hand machined and finished.
- 0-1 inch Cool Weld Studios custom micrometer - They are made from suitable cores. A custom mike?. images show the. 001 plain (the. 0001" plain thimble is not shown) and. 0001" friction thimble respectively. The lock knob, thimble end and spinner knob are rope knurled.
- Starrett No.220 Anvil 0-1 Inch Outside Micrometer - Starrett No.220 Anvil 0-1 Inch Outside Micrometer
- Fowler and QLR 0 To 1" Grad-.0001" EZ- Read Spline Micrometer Screw type - Fowler and QLR 0 To 1" Grad-.0001" EZ- Read Spline Micrometer Screw type. Seems to Work Great. Hasn't been Calibrated for several years based on the taped label on reverse. Comes with this nice blue case. See pics for complete description. Sold as shown. .. Quick shipping... Thank you!!
- STARRETT INSIDE MICROMETER SET NO 124 w/ WOOD CASE - Missing one piece - STARRETT INSIDE MICROMETER SET NO 124 w/ WOOD CASE - Missing one piece
- Starrett # 440 Micrometer Depth Gage In Wooden Case
- Insize 3203-100A Outside Micrometer Range 75-100mm Graduation 0.01mm - Graduation: 0.01mm.
- Insize 3203-75A Outside Micrometer Range 50-75mm Graduation 0.01mm - Graduation: 0.01mm.
- Insize 3203-50A Outside Micrometer Range 25-50mm Graduation 0.01mm - Graduation: 0.01mm.
- Insize 3203-25A Outside Micrometer Range 0-25mm Graduation 0.01mm - Graduation: 0.01mm.
- Vintage Starrett Micrometer Caliper No. 224 Set AA Range 0 to 4"
- Starrett 436 1-2" Outside Micrometer w/case - Zero defects. Software test results are available. No signs of wear or alteration. The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.
- Starrett PT24916 Plastic Case with Foam Insert for 1" Micrometers - Old Style - Starrett PT24916 - Old Style.
- 8 Mitutoyo Micrometer Standards 11” To 18” Size Range - 8 MITUTOYO MICROMETER STANDARDS 11” TO 18” SIZE RANGE. 11”-15” are used 16”-18” are new
- mitutoyo 0-6" dial caliper NEW inches .001" graduation "made in Japan" - Mitutoyo 0-6"NEW! dial caliper .001" graduation,made in Japan.Moves smoothly and freely.As found in factory.Thanks.
- Misumi High Grade X Axis Stage LS-7042-S8 Chuo Seiki Fine Pitch Micrometer 10349 - Misumi High Grade X Axis Stage LS-7042-S8 with Chuo Seiki Fine Pitch Micrometer (10349) Manufacturer: Misumi, Chuo Seiki Model: LS-7042-S8-2 Includes one Chuo Seiki Micrometer Fine Pitch High grade X-Axis Stage Surface: 70mm X 70 mm Maximum Load: 245 N.
- STARRETT 0 to 9" DEPTH MICROMETER - .001" - #445 - Made in the USA by Starrett. Model #: 445. Base Length: 6". Graduations.001".
- Mitutoyo 102-707 Ratchet Thimble Micrometer M32725 Measurement Japan - Use in processing site. pressure apparatus: Ratchet thimble. Min Display (mm): 0.001. [ Release Date(yyyy/mm/dd) ]. [ Electronics ].
- Vintage BROWN & SHARPE MFG CO MICROMETER CALIPERS # 61a & 60 1"-2" Original Box - Picked these up recently at a estate sale. Set of 2 Both are in great shape and function properly. (Nothing major) Original box and manual. There were two in this box. The box is labeled with the part # 61a 1"-2" and the one on the left is the 61a.
- Vintage Brown & Sharpe No. 608 Depth Micrometer Gauge Set - Made In USA - Vintage Brown & Sharpe No. 608 Depth Micrometer Gauge Set - Made In USA. Gauge is in used condition but still functions properly. Please look over the photos and ask any questions.
- Vintage Starrett Micrometer #124B - Vintage Starrett Micrometer #124B. Complete set, inside measurement all in very good condition
- Starret 449Az-6R Micrometer Depth Gauge W/ Non-Rotating Blade 0-6" Range , .001" - Non-rotating blade: blade does not turn, but moves perpendicularly only. NON-ROTATING BLADE.045" thick x 1/8" wide (1.2 x 3.2mm) blade. 0-3" RANGE . 001". Range (in): 0-3". Accuracy (in): Mic head +/-.0001"; Rods +/-.0002".
- Digital Micrometer, 0-1" Range with 6 Digit LCD Display, .0001" Graduation - Despite the dent, latches still keep the storage box closed. Length 2.250". Color Blue.
- Vintage Brown & Sharpe 2" Outside Micrometer # 48 Nice Cond In Original Wood Box - VINTAGE BROWN & SHARPE 2" OUTSIDE MICROMETER # 48 NICE COND IN ORIGINAL WOOD BOX.
- #41 Brown & Sharpe No 13B Outside 0"- 1" Machinist Micrometer Caliper Tool
- Nice Mahr 1" - 2" Indicating Micrometer in Factory Box Accurate to 0.0001" - Alternatively, you can adjust to the nearest mark on the thimble and read thenumber of tenths over or under on the dial. You have to re-zero the dial using the small knob on theindicator if the temperature changes much.
- Starret Mechanical Outside Micrometer Set: 6 Pc, 0 to 6″ Measurement 0820908 - It has been tested and works great with no known issues. I put magnified photos on here so that you can see details. This includes Canada.
- Etalon Indicating Micromter 0-1" .0001" No Etchings Switzerland - Made inSwitzerland by Etalon. · Made in Switzerland to highest precision and quality standards.
- Lufkin Rule Co. No. 915 Adjustable Parallels Set 6 Pieces - LUFKIN RULE CO. NO. 915 ADJUSTABLE PARALLELS SET 6 PIECES. Set is in good working condition. Normal signs of use on the blocks as seen in the photos. All have previous owners initials or name on them. Set contains parallel block number 915 A, 915 B, 915 C, 915 D, 915 E, and 915 F. Range is from 1/8 to 2 1/4
- Used Brown & Sharpe 0-1" Outside Micrometer (Graduations .0001")
- NEW Fowler 0-1'' Precision Outside Micrometer, .0001 With Hard Case - NEW Fowler 0-1'' Precision Outside Micrometer, .0001 With Hard Case.
- Starrett 0-1" Outside Micrometer w/Starrett 1" Setting Standard - Good Daily Mic - Works smoothly and is accurate.
- Starrett 436.1XRL-1 Outside Micrometer - .001" - Carbide Anvils - 0-1" with Case
- (103x17mm/4.1x0.7in)Depth Dial Indicator Base Depth Gauge Bracket Micrometer - Feature: 1. Item Type: Depth Dial Indicator Base. If you do not receive our reply within 48 hours, pls. If you are satisfied with our service, pls. Stainless Steel Material: Made of premium stainless steel, the base is resistant to corrosion, rust and temperature, has long last durability.
- Starrett 263MXL Micrometer Head 0-25mm Plain Thimble .01mm IN STOCK - Thimble Type : Plain. Lock Nut Type :Ring Type Knurled. Range (mm) :0-25mm.
- MITUTOYO 1-8 .125 Metric Outside Micrometer Calibration - DON'T KNOW ANYTHING ABOUT IT. SEE PHOTOS.
- Black Spring Height Micrometer Measurer Measure Tool M3Z5 - Made of superior quality with black finish, not easy to deform and to use. Color: black. Pacckage weight: 70g.
- Starrett Micrometer No 436P 1" w/orig box, wrench, cert & instructions - Starrett Micrometer No 436P 1" w/orig box, wrench, cert & instructions.
- Starrett No. T436XRL Carbide Micrometer- 3” (.0001”) - New - Starrett No. T436XRL Carbide Micrometer- 3” (.0001”) - New.
- #823 Starrett 1 1/2" - 8" Tubular Inside Micrometer 1/2 -4" Rods - #823 Starrett 1 1/2" - 8" Tubular Inside Micrometer 1/2 -4" Rods.
- MITUTOYO 293-721 Digital Micrometer 0”-1” - MITUTOYO 293-721 Digital Micrometer 0”-1”.
- 6Pcs 0-6" Precision Outside Micrometer Set 0.0001" Carbide Standards - Description: This precision outside micrometer set has Crisp, clear, easy-to-read graduation, and accurate to .0001". With durability and accuracy Hardened and ground spindle with carbide anvil, This set will Comes in a padded case with standards and calibration wrench. Features: Carbide Measuring Face Super Hard Carbide Tipped Anvils Graduations: 0.0001" with Vernier Scale Complete with calibration standards and wrenches ratched stop; lock nut, Ratchet Thimble Handle for precise application of force. Solid, Long Lasting Accuracy with Cast Steel Frame - Powder Coated Baked Finish Laser Etched Graduations will never fade .
- Vintage J. T. Slocomb Co. Outside Micrometers Tool 0-1" & 1-2", Providence, R.I.
- 52-240-007-1, Outside Inch Micrometer With 6-7"e; Measuring Range
- Insize 3109-200A Digital Outside Micrometer Range 175-200mm/7-8″ Basic Type - Supplied with spherical anvil. Basic Type, Without Data Output. 175-200mm/7-8″.
- Insize 3109-175A Digital Outside Micrometer Range 150-175mm/6-7″ Basic Type - Supplied with spherical anvil. Basic Type, Without Data Output. 150-175mm/6-7″.
- Insize 3109-150A Digital Outside Micrometer Range 125-150mm/5-6″ Basic Type - Supplied with spherical anvil. Basic Type, Without Data Output. 125-150mm/5-6″.
- Insize 3109-125A Digital Outside Micrometer Range 100-125mm/4-5″ Basic Type - Supplied with spherical anvil. Basic Type, Without Data Output. 100-125mm/4-5″.
- Insize 3109-100A Digital Outside Micrometer Range 75-100mm/3-4″ Basic Type - Supplied with spherical anvil. Basic Type, Without Data Output. 75-100mm/3-4″.
- Insize 3109-75A Digital Outside Micrometer Range 50-75mm/2-3″ Basic Type - Supplied with spherical anvil. Basic Type, Without Data Output. 50-75mm/2-3″.
- Insize 3109-50A Digital Outside Micrometer Range 25-50mm/1-2″ Basic Type - Supplied with spherical anvil. Basic Type, Without Data Output. 25-50mm/1-2″.
- Insize 3109-25A Digital Outside Micrometer Range 0-25mm/0-1″ Basic Type - Supplied with spherical anvil. Basic Type, Without Data Output. 0-25mm/0-1″.
- Insize 3101-100A Digital Outside Micrometer Range 75-100mm/3-4″ IP65 Waterproof - IP65 dust/waterproof. 75-100mm/3-4″.
- Insize 3101-75A Digital Outside Micrometer Range 50-75mm/2-3″ IP65 Waterproof - IP65 dust/waterproof. 50-75mm/2-3″.
- Insize 3101-50A Digital Outside Micrometer Range 25-50mm/1-2″ IP65 Waterproof - IP65 dust/waterproof. 25-50mm/1-2″.
- Insize 3101-25A Digital Outside Micrometer Range 0-25mm/0-1″ IP65 Waterproof - IP65 dust/waterproof. 0-25mm/0-1″.
- Mitoyutoyo Count outside micrometer M81025
- 104 Series 12 to 16" SAE Mechanical Outside Micrometer w Interchangeable Anvils - 104 Series™ 12 to 16" SAE Mechanical Outside Micrometer with Interchangeable Anvils (104-152) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103 Series 50 to 75 mm Metric Mechanical Outside Micrometer - 103 Series™ 50 to 75 mm Metric Mechanical Outside Micrometer (103-139-10) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 614202-531 516 Series 2" SAE Square Gauge Block - 516 Series™ 2" SAE Square Gauge Block (614202-531) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo® 295 Series™ 0 to 1" SAE Mechanical Outside Spherical and Cylindrical - 295 Series™ 0 to 1" SAE Mechanical Outside Spherical and Cylindrical Anvils Tube Micrometer by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-129 103 Series 0 to 25 mm Metric Mechanical Outside Micrometer - 103 Series™ 0 to 25 mm Metric Mechanical Outside Micrometer (103-129) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 527 Series 0 to 6" SAE Stainless Steel Dial Depth Gauge w Fine Adjustment - 527 Series™ 0 to 6" SAE Stainless Steel Dial Depth Gauge with Fine Adjustment (527-311-50) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-137 103 Series 0 to 25 mm Metric Mechanical Outside Micrometer - 103 Series™ 0 to 25 mm Metric Mechanical Outside Micrometer (103-137) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 910 Series Steel & Vinyl Storage Case for 1" Micrometers - 910 Series™ Steel and Vinyl Storage Case for 1" Micrometers by Starrett®. Starrett 806, Thickness Gauge holders provide a handy, convenient means of rigidly holding single leaves or strips of thickness gauge stock of any thickness from .001-.025". Clamps stock at one end. Easily holds stock up to 6" (150mm) long.
- 104 Series 18 to 24" SAE Mechanical Outside Micrometer w Interchangeable Anvils - 104 Series™ 18 to 24" SAE Mechanical Outside Micrometer with Interchangeable Anvils (104-202) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 102 Series 0 to 25 mm Metric Mechanical Outside Micrometer - 102 Series™ 0 to 25 mm Metric Mechanical Outside Micrometer by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 104 Series 6 to 12" SAE Mechanical Outside Micrometer w Interchangeable Anvils - 104 Series™ 6 to 12" SAE Mechanical Outside Micrometer with Interchangeable Anvils (104-138) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 237 Series 0 to 6" SAE Steel Rule Depth Gauge - 237 Series™ 0 to 6" SAE Steel Rule Depth Gauge by Starrett®. Steel Rule Depth Gage is very handy and can be used to quickly obtain measurements in 64th of an inch or 1/2mm by simply adjusting the rule to the required depth. Graduations at 32nds, and 64ths.
- Mitutoyo 547 Series 0 to 8" SAE & Metric Digital Absolute Depth Gauge - 547 Series™ 0 to 8" SAE and Metric Digital Absolute Depth Gauge (547-258S) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 234" Series 24" SAE Micrometer Standard - 234" Series™ 24" SAE Micrometer Standard by Starrett®. Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 24" w/Rubber Handle.
- Mitutoyo 103-226 103 Series 11" to 12" SAE Mechanical Outside Micrometer - 103 Series™ 11" to 12" SAE Mechanical Outside Micrometer (103-226) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-912 167 Series 5-piece SAE Mechanical Outside Micrometer Set - 167 Series™ 5-piece SAE Mechanical Outside Micrometer Set (167-912) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-908-40 103 Series 0 to 12" SAE Mechanical Outside Micrometer Set - 103 Series™ 0 to 12" SAE Mechanical Outside Micrometer Set (103-908-40) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-193 103 Series 16 to 17" SAE Mechanical Outside Micrometer - 103 Series™ 16 to 17" SAE Mechanical Outside Micrometer (103-193) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 2 to 3" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 2 to 3" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-342-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-187 103 Series 10 to 11" SAE Mechanical Outside Micrometer - 103 Series™ 10 to 11" SAE Mechanical Outside Micrometer (103-187) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 571 Series 0 to 8" SAE & Metric Digital Absolute Depth Gauge - 571 Series™ 0 to 8" SAE and Metric Digital Absolute Depth Gauge (571-212-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo® 293 Series™ 1 to 2" SAE and Metric Digital QuantuMike Coolant-Proof - 293 Series™ 1 to 2" SAE and Metric Digital QuantuMike Coolant-Proof Outside Micrometer (293-181-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 6 to 7" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 6 to 7" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-352-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett T436.1XRL-11 436 Series 10 to 11" SAE Mechanical Outside Micrometer - 436 Series™ 10 to 11" SAE Mechanical Outside Micrometer (T436.1XRL-11) by Starrett®. The Starrett 436 Outside Micrometer features ratchet stop, lock nut, and carbide face.0001" Grad, Ratchet Stop, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett T436.1XRL-7 436 Series 6 to 7" SAE Mechanical Outside Micrometer - 436 Series™ 6 to 7" SAE Mechanical Outside Micrometer (T436.1XRL-7) by Starrett®. The Starrett 436 Outside Micrometer features ratchet stop, lock nut, and carbide face.0001" Grad, Ratchet Stop, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 436.1XRLZ-21 436 Series 20 to 21" SAE Mechanical Outside Micrometer - 436 Series™ 20 to 21" SAE Mechanical Outside Micrometer (436.1XRLZ-21) by Starrett®. The Starrett 436 Outside Micrometer features a ratchet stop, lock nut, and carbide face with case. 20-21", .001" Grad, Ratchet Stop, Lock Nut, Carbide Faces, Case. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 3732 Series 0 to 1" SAE & Metric Digital Outside Micrometer - 3732 Series™ 0 to 1" SAE and Metric Digital Outside Micrometer (3732XFL-1) by Starrett®. The Starrett 3732 Electronic Micrometer is a full-featured precision measuring tool built with customary Starrett quality and workmanship. The 3732 series includes a large, easy-to-read, high-contrast LCD digital readout for clear readings. With its automatic OFF functionality, smooth friction thimble for uniform pressure, and balanced frame design, Starrett products provide comfortable and accurate measuring Its no-glare satin chrome finish minimizes annoying surface glare under bright lights indoors. 0-1" (0-25.4 Approx mm), 0.00005" (0.001 mm) Resolution.
- Mitutoyo® 293 Series™ 2 to 3" SAE and Metric Digital QuantuMike Coolant-Proof - 293 Series™ 2 to 3" SAE and Metric Digital QuantuMike Coolant-Proof Outside Micrometer (293-187-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-218 103 Series 3 to 4" SAE Mechanical Outside Micrometer - 103 Series™ 3 to 4" SAE Mechanical Outside Micrometer (103-218) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 150 Series 0 to 25 Mitutoyo® 150 Series™ 0 to 25 mm Metric Mechanical Common - 150 Series™ 0 to 25 mm Metric Mechanical Common Type in Middle Size Micrometer Head by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 395 Series 0 to 1" SAE & Metric Digital Spherical Face Outside Micrometer - 395 Series™ 0 to 1" SAE and Metric Digital Spherical Face Outside Micrometer (395-351-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-160 167 Series 20" SAE Micrometer Standard - 167 Series™ 20" SAE Micrometer Standard (167-160) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-131 103 Series 0 to 1" SAE Mechanical Outside Micrometer - 103 Series™ 0 to 1" SAE Mechanical Outside Micrometer (103-131) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 293 Series 0 to 1" SAE & Metric Digital Outside Micrometer - 293 Series™ 0 to 1" SAE and Metric Digital Outside Micrometer (293-831-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167 Series 2" SAE Micrometer Standard for Screw Thread Micrometer - 167 Series™ 2" SAE Micrometer Standard for Screw Thread Micrometer (167-295) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 145-194 145 Series 1 to 2" SAE Mechanical Inside Micrometer - 145 Series™ 1 to 2" SAE Mechanical Inside Micrometer (145-194) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-163 167 Series 23" SAE Micrometer Standard - 167 Series™ 23" SAE Micrometer Standard (167-163) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-913 167 Series 11-piece SAE Mechanical Outside Micrometer Set - 167 Series™ 11-piece SAE Mechanical Outside Micrometer Set (167-913) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 193 Series 0 to 1" SAE Mechanical Digit Count Outside Micrometer - 193 Series™ 0 to 1" SAE Mechanical Digit Count Outside Micrometer (193-211) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 129 Series 0 to 12" SAE Mechanical Interchangeable Rod Type Depth Micrometer - 129 Series™ 0 to 12" SAE Mechanical Interchangeable Rod Type Depth Micrometer (129-150) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-165 167 Series 24" SAE Micrometer Standard - 167 Series™ 24" SAE Micrometer Standard (167-165) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-145 167 Series 5" SAE Micrometer Standard - 167 Series™ 5" SAE Micrometer Standard (167-145) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo® 293 Series™ 3 to 4" SAE and Metric Digital QuantuMike Coolant-Proof - 293 Series™ 3 to 4" SAE and Metric Digital QuantuMike Coolant-Proof Outside Micrometer (293-188-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 350-351-30 350 Series 0 to 1" SAE & Metric Digital Micrometer Head - 350 Series™ 0 to 1" SAE and Metric Digital Micrometer Head (350-351-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 516-902-26 516 Series 81-piece SAE Steel Rectangular Gauge Block Set - 516 Series™ 81-piece SAE Steel Rectangular Gauge Block Set (516-902-26) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 824 Series 8 to 10" SAE Mechanical Fixed Range Inside Micrometer - 824 Series™ 8 to 10" SAE Mechanical Fixed Range Inside Micrometer by Starrett®. The Starrett 824 Inside Micrometer is for those who prefer inside micrometers without interchangeable rods. The 824 and 824M Series can be ordered individually or in sets. 8-10" Range, .001" Grad.
- Starrett 436.1XRLZ-14 436 Series 13 to 14" SAE Mechanical Outside Micrometer - 436 Series™ 13 to 14" SAE Mechanical Outside Micrometer (436.1XRLZ-14) by Starrett®. The Starrett 436 Outside Micrometer features a ratchet stop, lock nut, and carbide face with case. 13-14", .001" Grad, Ratchet Stop, Lock Nut, Carbide Faces, Case. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 234A-9 234 Series 9" SAE Micrometer Standard - 234 Series™ 9" SAE Micrometer Standard (234A-9) by Starrett®. Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 9" w/Rubber Handle.
- Starrett 124 Series 6-1/2" Handle for 124 Series Solid Rod Inside Micrometer - 124 Series™ 6-1/2" Handle for 124 Series Solid Rod Inside Micrometer by Starrett®. Handle (6-1/2", 165mm) for 124 Series Sold-Rod inside Micrometer Sets. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 234MA-575 234 Series 575 mm Metric Micrometer Standard - 234 Series™ 575 mm Metric Micrometer Standard (234MA-575) by Starrett®. Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 575mm w/Rubber Handle.
- Starrett 234A-13 234 Series 13" SAE Micrometer Standard - 234 Series™ 13" SAE Micrometer Standard (234A-13) by Starrett®. Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 13" w/Rubber Handle.
- 527 Series 0 to 12" SAE Stainless Steel Dial Depth Gauge w Fine Adjustment - 527 Series™ 0 to 12" SAE Stainless Steel Dial Depth Gauge with Fine Adjustment (527-313-50) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 614201-531 516 Series 1" SAE Square Gauge Block - 516 Series™ 1" SAE Square Gauge Block (614201-531) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 572 Series 0 to 6" SAE & Metric Digital Horizontal Single-Function Type Scale - 572 Series™ 0 to 6" SAE and Metric Digital Horizontal Single-Function Type Scale (572-614) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 611195-531 516 Series 0.5" SAE Rectangular Gauge Block - 516 Series™ 0.5" SAE Rectangular Gauge Block (611195-531) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 950 Series 1" SAE Micrometer Standard - 950 Series™ 1" SAE Micrometer Standard by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 611105-531 516 Series 0.05" SAE Rectangular Gauge Block - 516 Series™ 0.05" SAE Rectangular Gauge Block (611105-531) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103 Series 0 to 150 mm Metric Mechanical Outside Micrometer Set - 103 Series™ 0 to 150 mm Metric Mechanical Outside Micrometer Set by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103 Series 100 to 125 mm Metric Mechanical Outside Micrometer - 103 Series™ 100 to 125 mm Metric Mechanical Outside Micrometer (103-141-10) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167 Series 1" SAE Micrometer Standard for Screw Thread Micrometer - 167 Series™ 1" SAE Micrometer Standard for Screw Thread Micrometer (167-294) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-162 167 Series 22" SAE Micrometer Standard - 167 Series™ 22" SAE Micrometer Standard (167-162) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 128-106 128 Series 0 to 1" SAE Mechanical Depth Micrometer - 128 Series™ 0 to 1" SAE Mechanical Depth Micrometer (128-106) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 150 Series 0 to 1" SAE Mechanical Common Type in Middle Size Micrometer Head - 150 Series™ 0 to 1" SAE Mechanical Common Type in Middle Size Micrometer Head (150-207) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo® 395 Series™ 0 to 1" SAE and Metric Digital Outside Cylindrical Anvils - 395 Series™ 0 to 1" SAE and Metric Digital Outside Cylindrical Anvils Tube Micrometer (395-364-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-149 167 Series 9" SAE Micrometer Standard - 167 Series™ 9" SAE Micrometer Standard (167-149) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 101-119 101 Series 2 to 3" SAE Mechanical Outside Micrometer - 101 Series™ 2 to 3" SAE Mechanical Outside Micrometer (101-119) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 571 Series 0 to 12" SAE & Metric Digital Absolute Coolant-Proof Depth Gauge - 571 Series™ 0 to 12" SAE and Metric Digital Absolute Coolant-Proof Depth Gauge (571-263-10) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 129 Series 0 to 4" SAE Mechanical Interchangeable Rod Type Depth Micrometer - 129 Series™ 0 to 4" SAE Mechanical Interchangeable Rod Type Depth Micrometer (129-127) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 1 to 2" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 1 to 2" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-341-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-136 103 Series 1 to 2" SAE Mechanical Outside Micrometer - 103 Series™ 1 to 2" SAE Mechanical Outside Micrometer (103-136) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 516 Series 81-piece SAE Steel Square Gauge Block Set - 516 Series™ 81-piece SAE Steel Square Gauge Block Set by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 150 Series 0 to 1" SAE Mechanical Common Type in Middle Size Micrometer Head - 150 Series™ 0 to 1" SAE Mechanical Common Type in Middle Size Micrometer Head (150-198) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 436.1XRLZ-18 436 Series 17 to 18" SAE Mechanical Outside Micrometer - 436 Series™ 17 to 18" SAE Mechanical Outside Micrometer (436.1XRLZ-18) by Starrett®. The Starrett 436 Outside Micrometer features a ratchet stop, lock nut, and carbide face with case. 17-18", .001" Grad, Ratchet Stop, Lock Nut, Carbide Faces, Case. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 436.1XRL-8 436 Series 7 to 8" SAE Mechanical Outside Micrometer - 436 Series™ 7 to 8" SAE Mechanical Outside Micrometer (436.1XRL-8) by Starrett®. The Starrett 436 Outside Micrometer features a ratchet stop, lock nut, and carbide face.001" Grad, Ratchet Stop, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 436.1XRLZ-19 436 Series 18 to 19" SAE Mechanical Outside Micrometer - 436 Series™ 18 to 19" SAE Mechanical Outside Micrometer (436.1XRLZ-19) by Starrett®. The Starrett 436 Outside Micrometer features a ratchet stop, lock nut, and carbide face with case. 18-19", .001" Grad, Ratchet Stop, Lock Nut, Carbide Faces, Case. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 796 Series 0 to 1" SAE & Metric Digital Outside Micrometer - 796 Series™ 0 to 1" SAE and Metric Digital Outside Micrometer (796.1XFL-1) by Starrett®. The Starrett 796.1 Electronic Micrometers provide an IP67 level of protection against coolant, water, chips, dirt, dust, and other contaminants in hostile shop environments. The 796.1 Electronic micrometers are built with customary Starrett quality and workmanship. 0-1" Range, With Friction Thimble, With Carbide Faces, Without Output.
- Starrett T436.1XRL-10 436 Series 9 to 10" SAE Mechanical Outside Micrometer - 436 Series™ 9 to 10" SAE Mechanical Outside Micrometer (T436.1XRL-10) by Starrett®. The Starrett 436 Outside Micrometer features ratchet stop, lock nut, and carbide face.0001" Grad, Ratchet Stop, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett T436.1XRL-12 436 Series 11" to 12" SAE Mechanical Outside Micrometer - 436 Series™ 11" to 12" SAE Mechanical Outside Micrometer (T436.1XRL-12) by Starrett®. The Starrett 436 Outside Micrometer features ratchet stop, lock nut, and carbide face.0001" Grad, Ratchet Stop, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 436.1XRLZ-22 436 Series 21 to 22" SAE Mechanical Outside Micrometer - 436 Series™ 21 to 22" SAE Mechanical Outside Micrometer (436.1XRLZ-22) by Starrett®. The Starrett 436 Outside Micrometer features a ratchet stop, lock nut, and carbide face with case. 21-22", .001" Grad, Ratchet Stop, Lock Nut, Carbide Faces, Case. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 796 Series 0 to 1" SAE & Metric Digital Outside Micrometer - 796 Series™ 0 to 1" SAE and Metric Digital Outside Micrometer (796.1XRL-1) by Starrett®. The Starrett 796.1 Electronic Micrometers provide an IP67 level of protection against coolant, water, chips, dirt, dust, and other contaminants in hostile shop environments. The 796.1 Electronic micrometers are built with customary Starrett quality and workmanship. 0-1" Range, With Ratchet Stop, With Carbide Faces, Without Output.
- Mitutoyo 103-189 103 Series 12 to 13" SAE Mechanical Outside Micrometer - 103 Series™ 12 to 13" SAE Mechanical Outside Micrometer (103-189) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 1 to 2" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 1 to 2" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-331-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 193 Series 2 to 3" SAE Mechanical Digit Count Outside Micrometer - 193 Series™ 2 to 3" SAE Mechanical Digit Count Outside Micrometer (193-213) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 3 to 4" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 3 to 4" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-347-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-184 103 Series 7 to 8" SAE Mechanical Outside Micrometer - 103 Series™ 7 to 8" SAE Mechanical Outside Micrometer (103-184) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-904-10 103 Series 0 to 6" SAE Mechanical Outside Micrometer Set - 103 Series™ 0 to 6" SAE Mechanical Outside Micrometer Set (103-904-10) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 3 to 4" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 3 to 4" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-333-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-142 167 Series 2" SAE Micrometer Standard - 167 Series™ 2" SAE Micrometer Standard (167-142) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-183 103 Series 6 to 7" SAE Mechanical Outside Micrometer - 103 Series™ 6 to 7" SAE Mechanical Outside Micrometer (103-183) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-195 103 Series 18 to 19" SAE Mechanical Outside Micrometer - 103 Series™ 18 to 19" SAE Mechanical Outside Micrometer (103-195) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 4-piece SAE & Metric Digital Coolant-Proof Outside Micrometer Set - 293 Series™ 4-piece SAE and Metric Digital Coolant-Proof Outside Micrometer Set (293-961-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo® 395 Series™ 0 to 1" SAE and Metric Digital Outside Cylindrical Anvils - 395 Series™ 0 to 1" SAE and Metric Digital Outside Cylindrical Anvils Tube Micrometer (395-363-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-158 167 Series 18" SAE Micrometer Standard - 167 Series™ 18" SAE Micrometer Standard (167-158) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 128-105 128 Series 0 to 1" SAE Mechanical Depth Micrometer - 128 Series™ 0 to 1" SAE Mechanical Depth Micrometer (128-105) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-143 167 Series 3" SAE Micrometer Standard - 167 Series™ 3" SAE Micrometer Standard (167-143) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 149 Series 0 to 15 mm Metric Mechanical Common Type Micrometer Head - 149 Series™ 0 to 15 mm Metric Mechanical Common Type Micrometer Head by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 151 Series 0 to 1" SAE Mechanical Common Type in Middle Size Micrometer Head - 151 Series™ 0 to 1" SAE Mechanical Common Type in Middle Size Micrometer Head (151-240) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 148 Series 0 to 13 Mitutoyo® 148 Series™ 0 to 13 mm Metric Mechanical Common - 148 Series™ 0 to 13 mm Metric Mechanical Common Type in Small Size Micrometer Head (148-804) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 234A-10 234 Series 10" SAE Micrometer Standard - 234 Series™ 10" SAE Micrometer Standard (234A-10) by Starrett®. Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 10" w/Rubber Handle.
- Starrett 234A-15 234 Series 15" SAE Micrometer Standard - 234 Series™ 15" SAE Micrometer Standard (234A-15) by Starrett®. Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 15" w/Rubber Handle.
- Starrett 234MA-475 234 Series 475 mm Metric Micrometer Standard - 234 Series™ 475 mm Metric Micrometer Standard (234MA-475) by Starrett®. Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 475mm w/Rubber Handle.
- Mitutoyo 614204-531 516 Series 4" SAE Square Gauge Block - 516 Series™ 4" SAE Square Gauge Block (614204-531) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 234A-12 234 Series 12" SAE Micrometer Standard - 234 Series™ 12" SAE Micrometer Standard (234A-12) by Starrett®. Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 12" w/Rubber Handle.
- Starrett 234MA-425 234 Series 425 mm Metric Micrometer Standard - 234 Series™ 425 mm Metric Micrometer Standard (234MA-425) by Starrett®. Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 425mm w/Rubber Handle.
- Starrett 234MA-400 234 Series 400 mm Metric Micrometer Standard - 234 Series™ 400 mm Metric Micrometer Standard (234MA-400) by Starrett®. Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 400mm w/Rubber Handle.
- Mitutoyo 103-224 103 Series 9 to 10" SAE Mechanical Outside Micrometer - 103 Series™ 9 to 10" SAE Mechanical Outside Micrometer (103-224) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 148 Series 0 to 0.5" SAE Mechanical Common Type in Small Size Micrometer Head - 148 Series™ 0 to 0.5" SAE Mechanical Common Type in Small Size Micrometer Head (148-111) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 436 Series 125 mm to 150 mm Metric Mechanical Outside Micrometer - 436 Series™ 125 mm to 150 mm Metric Mechanical Outside Micrometer (436.1MXRL-150) by Starrett®. The Starrett 436.1M Outside Micrometer features ratchet stop, lock nut and carbide face. 0.01mm Grad, Ratchet Stop, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 436.1XRLZ-16 436 Series 15 to 16" SAE Mechanical Outside Micrometer - 436 Series™ 15 to 16" SAE Mechanical Outside Micrometer (436.1XRLZ-16) by Starrett®. The Starrett 436 Outside Micrometer features a ratchet stop, lock nut, and carbide face with case. 15-16", .001" Grad, Ratchet Stop, Lock Nut, Carbide Faces, Case. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 124 Series 0 to 1" SAE Mechanical Micrometer Head for 124A/B Inside Micrometer - 124 Series™ 0 to 1" SAE Mechanical Micrometer Head for 124A/B Inside Micrometer (H124A/B) by Starrett®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 766 Series SAE & Metric Digital Basic Precision Measuring Tool Set - 766 Series™ SAE and Metric Digital Basic Precision Measuring Tool Set by Starrett®. The Starrett S766A Basic Electronic Tool Set without Output features a basic starter set for electronic measuring including a 6" / 150mm slide caliper and 1"/25mm micrometer. SET (without Output): EC799A-6/150 / 3732XFL-1 in Case.
- Starrett 3753A-12/300 3753A Series 0 to 12" SAE & Metric Digital Depth Gauge - 3753A Series™ 0 to 12" SAE and Metric Digital Depth Gauge (3753A-12/300) by Starrett®. The Starrett 3753 Electronic Height Gage is light and easy to use for depth measurements within its range. 0-300 mm (0-12") Range. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 436.1RL-9 436 Series 8 to 9" SAE Mechanical Outside Micrometer - 436 Series™ 8 to 9" SAE Mechanical Outside Micrometer (436.1RL-9) by Starrett®. The Starrett 436 Outside Micrometer features a ratchet stop, lock nut, 8-9" range and .001" graduation.001" Grad, Ratchet Stop, Lock Nut. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 463 Series 0 to 0.5" SAE Steel Mechanical Micrometer Head - 463 Series™ 0 to 0.5" SAE Steel Mechanical Micrometer Head by Starrett®. The Starrett 463 Micrometer Head features lock nut. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 436.1XRL-7 436 Series 6 to 7" SAE Mechanical Outside Micrometer - 436 Series™ 6 to 7" SAE Mechanical Outside Micrometer (436.1XRL-7) by Starrett®. The Starrett 436 Outside Micrometer features a ratchet stop, lock nut, and carbide face.001" Grad, Ratchet Stop, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 436.1XRLZ-23 436 Series 22 to 23" SAE Mechanical Outside Micrometer - 436 Series™ 22 to 23" SAE Mechanical Outside Micrometer (436.1XRLZ-23) by Starrett®. The Starrett 436 Outside Micrometer features a ratchet stop, lock nut, and carbide face with case. 22-23", .001" Grad, Ratchet Stop, Lock Nut, Carbide Faces, Case. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 3753A-8/200 3753A Series 0 to 8" SAE & Metric Digital Depth Gauge - 3753A Series™ 0 to 8" SAE and Metric Digital Depth Gauge (3753A-8/200) by Starrett®. The Starrett 3753 Electronic Height Gage is light and easy to use for depth measurements within its range. 0-200 mm (0-8") Range. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 436.1XRLZ-15 436 Series 14" to 15" SAE Mechanical Outside Micrometer - 436 Series™ 14" to 15" SAE Mechanical Outside Micrometer (436.1XRLZ-15) by Starrett®. The Starrett 436 Outside Micrometer features a ratchet stop, lock nut, and carbide face with case. 14-15", .001" Grad, Ratchet Stop, Lock Nut, Carbide Faces, Case. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo® 293 Series™ 0 to 1" SAE and Metric Digital QuantuMike Coolant-Proof - 293 Series™ 0 to 1" SAE and Metric Digital QuantuMike Coolant-Proof Outside Micrometer (293-185-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 0 to 1" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 0 to 1" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-334-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 295 Series 0 to 1" SAE Mechanical Outside Spherical Face Micrometer - 295 Series™ 0 to 1" SAE Mechanical Outside Spherical Face Micrometer by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-144 167 Series 4' SAE Micrometer Standard - 167 Series™ 4' SAE Micrometer Standard (167-144) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 10 to 11" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 10 to 11" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-356-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-222 103 Series 7 to 8" SAE Mechanical Outside Micrometer - 103 Series™ 7 to 8" SAE Mechanical Outside Micrometer (103-222) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-188 103 Series 11" to 12" SAE Mechanical Outside Micrometer - 103 Series™ 11" to 12" SAE Mechanical Outside Micrometer (103-188) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 571 Series 0 to 18" SAE & Metric Digital Absolute Depth Gauge - 571 Series™ 0 to 18" SAE and Metric Digital Absolute Depth Gauge (571-214-10) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 115 Series 0 to 1" SAE Mechanical Spherical Face Outside Micrometer - 115 Series™ 0 to 1" SAE Mechanical Spherical Face Outside Micrometer (115-253) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-260 103 Series 0 to 1" SAE Mechanical Outside Micrometer - 103 Series™ 0 to 1" SAE Mechanical Outside Micrometer (103-260) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 101-114 101 Series 1 to 2" SAE Mechanical Outside Micrometer - 101 Series™ 1 to 2" SAE Mechanical Outside Micrometer (101-114) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 2 to 3" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 2 to 3" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-332-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo® 293 Series™ 0 to 1" SAE and Metric Digital QuantuMike Coolant-Proof - 293 Series™ 0 to 1" SAE and Metric Digital QuantuMike Coolant-Proof Outside Micrometer (293-180-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 436.1XRLZ-13 436 Series 12 to 13" SAE Mechanical Outside Micrometer - 436 Series™ 12 to 13" SAE Mechanical Outside Micrometer (436.1XRLZ-13) by Starrett®. The Starrett 436 Outside Micrometer features a ratchet stop, lock nut, and carbide face with case.001" Grad, Ratchet Stop, Lock Nut, Carbide Faces, Case. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-225 103 Series 10 to 11" SAE Mechanical Outside Micrometer - 103 Series™ 10 to 11" SAE Mechanical Outside Micrometer (103-225) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-152 167 Series 12" SAE Micrometer Standard - 167 Series™ 12" SAE Micrometer Standard (167-152) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 234A-8 234 Series 8" SAE Micrometer Standard - 234 Series™ 8" SAE Micrometer Standard (234A-8) by Starrett®. Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 8" w/Rubber Handle.
- Mitutoyo 167-155 167 Series 15" SAE Micrometer Standard - 167 Series™ 15" SAE Micrometer Standard (167-155) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 823 Series 5-1/2" Tubular Inside Micrometer Handle for 823 Series Micrometers - 823 Series™ 5-1/2" Tubular Inside Micrometer Handle for 823 Series Micrometers by Starrett®. Replacement Handle Only for 823 Series. 5-1/2" (140mm) long. May be clamped where it will provide correct balance and reach. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett® 247 Series™ 0.200" Micrometer Ball Attachments for 2, 226 and 230 - 247 Series™ 0.200" Micrometer Ball Attachments for 2, 226 and 230 Series Micrometers and 263 Series Micrometer Heads, .235" Diameter Anvil and Spindle (247A) by Starrett®. For 2, 226 and 230 Series Micrometers and 263 Series Micrometer Heads, .235" diameter Anvil and Spindle .235" Diameter Anvils. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 234A-5 234 Series 5" SAE Micrometer Standard - 234 Series™ 5" SAE Micrometer Standard (234A-5) by Starrett®. Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 5" w/Rubber Handle.
- 293 Series 75 to 100 Mitutoyo® 293 Series™ 75 to 100 mm Metric Digital - 293 Series™ 75 to 100 mm Metric Digital Coolant-Proof Outside Micrometer with Dust/Water Protection Conforming to IP65 Level (293-233-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 247 Series 0.200" Micrometer Ball Attachments for 224 Starrett® 247 Series™ - 247 Series™ 0.200" Micrometer Ball Attachments for 224, 247, 238, 239, 436, 663 Series Micrometers (247E) by Starrett®. For 224B through J, 238, 239, 436 Micrometers and 663 Micrometer Heads, .300" diameter Anvil and Spindle .300" Diameter Anvils. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 234MA-375 234 Series 375 mm Metric Micrometer Standard - 234 Series™ 375 mm Metric Micrometer Standard (234MA-375) by Starrett®. Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 375mm w/Rubber Handle.
- Starrett 823 Series SAE & Metric Micrometer Head - 823 Series™ SAE and Metric Micrometer Head by Starrett®. Starrett 823 Micrometer Head Only for 823A and 823B Inside Micrometers. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 234 Series SAE Micrometer Standard Set - 234 Series™ SAE Micrometer Standard Set by Starrett®. The S234E Standards Set is designed for checking and setting Starrett S436.1 and S436 Micrometer sets with 0-6" range. These End Measuring Rods or "Standards" are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. Rods or Standards are for checking and setting micrometers of 2" to 6" capacity.
- Mitutoyo 139 Series 4 to 5" SAE Mechanical Extension-Pipe Type Micrometer Head - 139 Series™ 4 to 5" SAE Mechanical Extension-Pipe Type Micrometer Head by Mitutoyo®. Extension-pipe type Micrometer head only. 4-5 inches range. 1" travel of micrometer head. For tubular inside micrometer. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-102 167 Series 50 mm Metric Micrometer Standard - 167 Series™ 50 mm Metric Micrometer Standard (167-102) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 228 Series 0 to 1" SAE Mechanical Hub Outside Micrometer - 228 Series™ 0 to 1" SAE Mechanical Hub Outside Micrometer by Starrett®. The Starrett 228 Hub Micrometer features ratchet stop, lock nut and a carbide face. 0-1", .001" Grad, Carbide Faces, Ratchet Stop, Lock Nut. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 234A-14 234 Series 14" SAE Micrometer Standard - 234 Series™ 14" SAE Micrometer Standard (234A-14) by Starrett®. Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 14" w/Rubber Handle.
- Mitutoyo 103 Series 75 to 100 mm Metric Mechanical Outside Micrometer - 103 Series™ 75 to 100 mm Metric Mechanical Outside Micrometer (103-140-10) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 234MA-325 234 Series 325 mm Metric Micrometer Standard - 234 Series™ 325 mm Metric Micrometer Standard (234MA-325) by Starrett®. Starrett 234 End Measuring Rods or standards are for checking and setting micrometers of 2" capacity and larger, and are also used on machine tools for comparing gages, checking precision measuring tools, for measuring parallel surfaces, and many other types of work. They are made of special tool steel in rod form with ends hardened and accurately lapped to a spherical radius. 325mm w/Rubber Handle.
- Starrett 648-6 648 Series 6" Hardened Steel Depth Gauge Base w Stem Collet - 648 Series™ 6" Hardened Steel Depth Gauge Base with Stem Collet (648-6) by Starrett®. 6" long depth gage base with 25SC38 Stem Collet to fit 3/8" (9.5mm) stem diameter (as per AGD). If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett Leather Micrometers Holster for 1" Micrometers - Leather Micrometers Holster for 1" Micrometers by Starrett®. These cases protect and store Starrett outside micrometers when not in use. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-151 167 Series 11" SAE Micrometer Standard - 167 Series™ 11" SAE Micrometer Standard (167-151) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-931 103 Series 0 to 4" SAE Mechanical Outside Micrometer Set - 103 Series™ 0 to 4" SAE Mechanical Outside Micrometer Set (103-931) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103 Series 125 mm to 150 mm Metric Mechanical Outside Micrometer - 103 Series™ 125 mm to 150 mm Metric Mechanical Outside Micrometer (103-142-10) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 614195-531 516 Series 0.5" SAE Square Gauge Block - 516 Series™ 0.5" SAE Square Gauge Block (614195-531) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 129 Series 0 to 6" SAE Mechanical Interchangeable Rod Type Depth Micrometer - 129 Series™ 0 to 6" SAE Mechanical Interchangeable Rod Type Depth Micrometer (129-128) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 124 Series 2 mm Metric Interchangeable Ball Anvil-Spindle Tip Set - 124 Series™ 2 mm Metric Interchangeable Ball Anvil-Spindle Tip Set (124-805) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo® 406 Series™ 1 to 2" SAE and Metric Digital Non-Rotating Spindle Type - 406 Series™ 1 to 2" SAE and Metric Digital Non-Rotating Spindle Type Outside Micrometer (406-351-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 571 Series 0 to 6" SAE & Metric Digital Absolute Depth Gauge - 571 Series™ 0 to 6" SAE and Metric Digital Absolute Depth Gauge (571-211-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 571 Series 0 to 6" SAE & Metric Digital Absolute Coolant-Proof Depth Gauge - 571 Series™ 0 to 6" SAE and Metric Digital Absolute Coolant-Proof Depth Gauge (571-261-20) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 101-118 101 Series 1 to 2" SAE Mechanical Outside Micrometer - 101 Series™ 1 to 2" SAE Mechanical Outside Micrometer (101-118) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 050083-10 1 Series 3" Depth Base for Caliper - 1 Series™ 3" Depth Base for Caliper (050083-10) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-154 167 Series 14" SAE Micrometer Standard - 167 Series™ 14" SAE Micrometer Standard (167-154) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-141 167 Series 1" SAE Micrometer Standard - 167 Series™ 1" SAE Micrometer Standard (167-141) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 3-piece SAE & Metric Digital Coolant-Proof Outside Micrometer Set - 293 Series™ 3-piece SAE and Metric Digital Coolant-Proof Outside Micrometer Set (293-960-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-185 103 Series 8 to 9" SAE Mechanical Outside Micrometer - 103 Series™ 8 to 9" SAE Mechanical Outside Micrometer (103-185) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-148 167 Series 8" SAE Micrometer Standard - 167 Series™ 8" SAE Micrometer Standard (167-148) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 193 Series 1 to 2" SAE Mechanical Digit Count Outside Micrometer - 193 Series™ 1 to 2" SAE Mechanical Digit Count Outside Micrometer (193-212) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett T436.1XRL-9 436 Series 8 to 9" SAE Mechanical Outside Micrometer - 436 Series™ 8 to 9" SAE Mechanical Outside Micrometer (T436.1XRL-9) by Starrett®. The Starrett 436 Outside Micrometer features ratchet stop, lock nut, and carbide face.0001" Grad, Ratchet Stop, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 3753A-6/150 3753A Series 0 to 6" SAE & Metric Digital Depth Gauge - 3753A Series™ 0 to 6" SAE and Metric Digital Depth Gauge (3753A-6/150) by Starrett®. The Starrett 3753 Electronic Height Gage is light and easy to use for depth measurements within its range. 0-150 mm (0-6") Range. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 126 Series 4.5 to 64 Mitutoyo® 126 Series™ 6-piece 4.5 to 64 TPI SAE and Metric - 126 Series™ 4.5 to 64 TPI SAE and Metric Mechanical Screw Thread Outside Micrometer Set by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-262 103 Series 1 to 2" SAE Mechanical Outside Micrometer - 103 Series™ 1 to 2" SAE Mechanical Outside Micrometer (103-262) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-146 167 Series 6" SAE Micrometer Standard - 167 Series™ 6" SAE Micrometer Standard (167-146) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-909 103 Series 6 to 12" SAE Mechanical Outside Micrometer Set - 103 Series™ 6 to 12" SAE Mechanical Outside Micrometer Set (103-909) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-219 103 Series 4 to 5" SAE Mechanical Outside Micrometer - 103 Series™ 4 to 5" SAE Mechanical Outside Micrometer (103-219) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-181 103 Series 4 to 5" SAE Mechanical Outside Micrometer - 103 Series™ 4 to 5" SAE Mechanical Outside Micrometer (103-181) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 395 Series 1 to 2" SAE & Metric Digital Spherical Face Outside Micrometer - 395 Series™ 1 to 2" SAE and Metric Digital Spherical Face Outside Micrometer (395-372-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 395 Series 2 to 3" SAE & Metric Digital Spherical Face Outside Micrometer - 395 Series™ 2 to 3" SAE and Metric Digital Spherical Face Outside Micrometer (395-373-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 104 Series 0 to 6" SAE Mechanical Outside Micrometer w Interchangeable Anvils - 104 Series™ 0 to 6" SAE Mechanical Outside Micrometer with Interchangeable Anvils (104-137) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-101 167 Series 25 mm Metric Micrometer Standard - 167 Series™ 25 mm Metric Micrometer Standard (167-101) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo® 115 Series™ 0 to 1" SAE Mechanical Spherical and Cylindrical Anvil - 115 Series™ 0 to 1" SAE Mechanical Spherical and Cylindrical Anvil Tybe Outside Micrometer (115-314) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 50 to 75 Mitutoyo® 293 Series™ 50 to 75 mm Metric Digital - 293 Series™ 50 to 75 mm Metric Digital Coolant-Proof Outside Micrometer with Dust/Water Protection Conforming to IP65 Level (293-232-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 572 Series 0 to 6" SAE & Metric Digital Vertical Single-Function Type Scale - 572 Series™ 0 to 6" SAE and Metric Digital Vertical Single-Function Type Scale by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 0 to 1" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 0 to 1" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-330-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 516 Series 9-piece SAE Steel Micrometer Inspection Gauge Block Set - 516 Series™ 9-piece SAE Steel Micrometer Inspection Gauge Block Set by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 223 Series 0 to 1" SAE Mechanical Outside Micrometer - 223 Series™ 0 to 1" SAE Mechanical Outside Micrometer by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 104 Series 20 to 24" SAE Mechanical Outside Micrometer w Interchangeable Anvils - 104 Series™ 20 to 24" SAE Mechanical Outside Micrometer with Interchangeable Anvils (104-154) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-907-40 103 Series 0 to 6" SAE Mechanical Outside Micrometer Set - 103 Series™ 0 to 6" SAE Mechanical Outside Micrometer Set (103-907-40) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 516-926-26 516 Series 10-piece SAE Steel Rectangular Gauge Block Set - 516 Series™ 10-piece SAE Steel Rectangular Gauge Block Set (516-926-26) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 164 Series 0 to 2" SAE & Metric Digital Micrometer Head - 164 Series™ 0 to 2" SAE and Metric Digital Micrometer Head by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 111 Series 0 to 1" SAE & Metric Mechanical Outside Micrometer - 111 Series™ 0 to 1" SAE and Metric Mechanical Outside Micrometer by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-192 103 Series 15 to 16" SAE Mechanical Outside Micrometer - 103 Series™ 15 to 16" SAE Mechanical Outside Micrometer (103-192) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo® 115 Series™ 0 to 1" SAE Mechanical Spherical and Cylindrical Anvil - 115 Series™ 0 to 1" SAE Mechanical Spherical and Cylindrical Anvil Tybe Outside Micrometer (115-313) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 148 Series 0 to 0.5" SAE Mechanical Common Type in Small Size Micrometer Head - 148 Series™ 0 to 0.5" SAE Mechanical Common Type in Small Size Micrometer Head (148-112) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 436 Series 50 to 75 mm Metric Mechanical Outside Micrometer - 436 Series™ 50 to 75 mm Metric Mechanical Outside Micrometer (436.1MXRL-75) by Starrett®. The Starrett 436.1M Outside Micrometer features ratchet stop, lock nut and carbide face. 0.01mm Grad, Ratchet Stop, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167 Series 4" SAE Micrometer Standard for Screw Thread Micrometer - 167 Series™ 4" SAE Micrometer Standard for Screw Thread Micrometer (167-297) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 262 Series 0 to 1" SAE Mechanical Micrometer Head - 262 Series™ 0 to 1" SAE Mechanical Micrometer Head by Starrett®. The Starrett 262 Micrometer Head includes a 0-1" range, lock nut, and .001" graduation. 0-1" Range, .001" Grad, Lock Nut. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo® 148 Series™ 0 to 0.5" SAE Mechanical Common Type in Small Size - 148 Series™ 0 to 0.5" SAE Mechanical Common Type in Small Size Micrometer Head with Zero-Adjustable Thimble (148-502) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-930 103 Series 0 to 4" SAE Mechanical Outside Micrometer Set - 103 Series™ 0 to 4" SAE Mechanical Outside Micrometer Set (103-930) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103 Series 25 mm to 50 mm Metric Mechanical Outside Micrometer - 103 Series™ 25 mm to 50 mm Metric Mechanical Outside Micrometer (103-138) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 104 Series 30 to 36" SAE Mechanical Outside Micrometer w Interchangeable Anvils - 104 Series™ 30 to 36" SAE Mechanical Outside Micrometer with Interchangeable Anvils (104-204) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 614191-531 516 Series 0.1" SAE Square Gauge Block - 516 Series™ 0.1" SAE Square Gauge Block (614191-531) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 329 Series 0 to 150 mm Metric Digital Depth Micrometer - 329 Series™ 0 to 150 mm Metric Digital Depth Micrometer by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 104 Series 16 to 20" SAE Mechanical Outside Micrometer w Interchangeable Anvils - 104 Series™ 16 to 20" SAE Mechanical Outside Micrometer with Interchangeable Anvils (104-153) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo® 293 Series™ 0 to 1" SAE and Metric Digital High-Accuracy Sub-Micron - 293 Series™ 0 to 1" SAE and Metric Digital High-Accuracy Sub-Micron Outside Micrometer by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103 Series 150 to 175 mm Metric Mechanical Outside Micrometer - 103 Series™ 150 to 175 mm Metric Mechanical Outside Micrometer (103-143-10) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-191 103 Series 14" to 15" SAE Mechanical Outside Micrometer - 103 Series™ 14" to 15" SAE Mechanical Outside Micrometer (103-191) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 395 Series 1 to 2" SAE & Metric Digital Spherical Face Outside Micrometer - 395 Series™ 1 to 2" SAE and Metric Digital Spherical Face Outside Micrometer (395-352-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 124 Series 4 mm Metric Interchangeable Ball Anvil-Spindle Tip Set - 124 Series™ 4 mm Metric Interchangeable Ball Anvil-Spindle Tip Set (124-810) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 516-903-26 516 Series 81-piece SAE Steel Rectangular Gauge Block Set - 516 Series™ 81-piece SAE Steel Rectangular Gauge Block Set (516-903-26) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 145-193 145 Series 0.2 to 1.2" SAE Mechanical Inside Micrometer - 145 Series™ 0.2 to 1.2" SAE Mechanical Inside Micrometer (145-193) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-132 103 Series 1 to 2" SAE Mechanical Outside Micrometer - 103 Series™ 1 to 2" SAE Mechanical Outside Micrometer (103-132) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 350 Series 0 to 1" SAE & Metric Digital Micrometer Head w Clamp Nut - 350 Series™ 0 to 1" SAE and Metric Digital Micrometer Head with Clamp Nut (350-382-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 151 Series 0 to 2" SAE Mechanical Common Type in Middle Size Micrometer Head - 151 Series™ 0 to 2" SAE Mechanical Common Type in Middle Size Micrometer Head (151-272) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 145-195 145 Series 2 to 3" SAE Mechanical Inside Micrometer - 145 Series™ 2 to 3" SAE Mechanical Inside Micrometer (145-195) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-147 167 Series 7" SAE Micrometer Standard - 167 Series™ 7" SAE Micrometer Standard (167-147) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 148 Series 0 to 0.5" SAE Mechanical Common Type in Small Size Micrometer Head - 148 Series™ 0 to 0.5" SAE Mechanical Common Type in Small Size Micrometer Head (148-832) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-164 167 Series 24" SAE Micrometer Standard - 167 Series™ 24" SAE Micrometer Standard (167-164) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-159 167 Series 19" SAE Micrometer Standard - 167 Series™ 19" SAE Micrometer Standard (167-159) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-156 167 Series 16" SAE Micrometer Standard - 167 Series™ 16" SAE Micrometer Standard (167-156) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-194 103 Series 17 to 18" SAE Mechanical Outside Micrometer - 103 Series™ 17 to 18" SAE Mechanical Outside Micrometer (103-194) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 611201-531 516 Series 1" SAE Rectangular Gauge Block - 516 Series™ 1" SAE Rectangular Gauge Block (611201-531) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 611191-531 516 Series 0.1" SAE Rectangular Gauge Block - 516 Series™ 0.1" SAE Rectangular Gauge Block (611191-531) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 148 Series 0 to 13 Mitutoyo® 148 Series™ 0 to 13 mm Metric Mechanical Common - 148 Series™ 0 to 13 mm Metric Mechanical Common Type in Small Size Micrometer Head (148-104) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 350 Series 0 to 1" SAE & Metric Digital Non-rotating Device Micrometer Head - 350 Series™ 0 to 1" SAE and Metric Digital Non-rotating Device Micrometer Head by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103 Series 0 to 1" SAE Mechanical Outside Economy Micrometer - 103 Series™ 0 to 1" SAE Mechanical Outside Economy Micrometer by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-220 103 Series 5 to 6" SAE Mechanical Outside Micrometer - 103 Series™ 5 to 6" SAE Mechanical Outside Micrometer (103-220) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-186 103 Series 9 to 10" SAE Mechanical Outside Micrometer - 103 Series™ 9 to 10" SAE Mechanical Outside Micrometer (103-186) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 9 to 10" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 9 to 10" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-355-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo® 340 Series™ 0 to 6" SAE and Metric Digital Outside Micrometer with - 340 Series™ 0 to 6" SAE and Metric Digital Outside Micrometer with Interchangeable Anvils (340-351-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 129 Series 0 to 4" SAE Mechanical Interchangeable Rod Type Depth Micrometer - 129 Series™ 0 to 4" SAE Mechanical Interchangeable Rod Type Depth Micrometer (129-131) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 1 to 2" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 1 to 2" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-345-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-922 103 Series 0 to 3" SAE Mechanical Outside Micrometer Set - 103 Series™ 0 to 3" SAE Mechanical Outside Micrometer Set (103-922) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 3 to 4" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 3 to 4" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-343-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 156 Series 0 to 2" SAE & Metric Fixed Angle Micrometer Stand w Platform - 156 Series™ 0 to 2" SAE and Metric Fixed Angle Micrometer Stand with Platform by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 0 to 1" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 0 to 1" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-335-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 050085-10 1 Series 5" Depth Base for Caliper - 1 Series™ 5" Depth Base for Caliper (050085-10) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 148 Series 0 to 0.25" SAE Mechanical Ultra-Small/Small Type Micrometer Head - 148 Series™ 0 to 0.25" SAE Mechanical Ultra-Small/Small Type Micrometer Head (148-208) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 1 to 2" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 1 to 2" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-336-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 129 Series 0 to 6" SAE Mechanical Interchangeable Rod Type Depth Micrometer - 129 Series™ 0 to 6" SAE Mechanical Interchangeable Rod Type Depth Micrometer (129-132) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 293 Series 0 to 1" SAE & Metric Digital Outside Micrometer - 293 Series™ 0 to 1" SAE and Metric Digital Outside Micrometer (293-832-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo® 406 Series™ 0 to 1" SAE and Metric Digital Non-Rotating Spindle Type - 406 Series™ 0 to 1" SAE and Metric Digital Non-Rotating Spindle Type Outside Micrometer (406-350-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 0 to 1" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 0 to 1" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-348-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-217 103 Series 2 to 3" SAE Mechanical Outside Micrometer - 103 Series™ 2 to 3" SAE Mechanical Outside Micrometer (103-217) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 25 mm to 50 Mitutoyo® 293 Series™ 25 mm to 50 mm Metric Digital - 293 Series™ 25 mm to 50 mm Metric Digital Coolant-Proof Outside Micrometer with Dust/Water Protection Conforming to IP65 Level (293-231-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-153 167 Series 13" SAE Micrometer Standard - 167 Series™ 13" SAE Micrometer Standard (167-153) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 0 to 25 Mitutoyo® 293 Series™ 0 to 25 mm Metric Digital - 293 Series™ 0 to 25 mm Metric Digital Coolant-Proof Outside Micrometer with Dust/Water Protection Conforming to IP65 Level (293-240-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-929 103 Series 0 to 3" SAE Mechanical Outside Micrometer Set - 103 Series™ 0 to 3" SAE Mechanical Outside Micrometer Set (103-929) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-135 103 Series 0 to 1" SAE Mechanical Outside Micrometer - 103 Series™ 0 to 1" SAE Mechanical Outside Micrometer (103-135) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 193 Series 25 mm to 50 mm Metric Digital Outside Micrometer - 193 Series™ 25 mm to 50 mm Metric Digital Outside Micrometer by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 11" to 12" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 11" to 12" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-357-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 115 Series 1 to 2" SAE Mechanical Spherical Face Outside Micrometer - 115 Series™ 1 to 2" SAE Mechanical Spherical Face Outside Micrometer (115-242) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 167-157 167 Series 17" SAE Micrometer Standard - 167 Series™ 17" SAE Micrometer Standard (167-157) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 0 to 1" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 0 to 1" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-344-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-190 103 Series 13 to 14" SAE Mechanical Outside Micrometer - 103 Series™ 13 to 14" SAE Mechanical Outside Micrometer (103-190) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 5 to 6" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 5 to 6" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-351-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 340 Series 18 to 24 Mitutoyo® 340 Series™ 18 to 24" SAE and Metric Digital - 340 Series™ 18 to 24" SAE and Metric Digital Outside Micrometer with Interchangeable Anvils (340-721) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 293 Series 0 to 1" SAE & Metric Digital Coolant-Proof Outside Micrometer - 293 Series™ 0 to 1" SAE and Metric Digital Coolant-Proof Outside Micrometer (293-340-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo® 293 Series™ 1 to 2" SAE and Metric Digital QuantuMike Coolant-Proof - 293 Series™ 1 to 2" SAE and Metric Digital QuantuMike Coolant-Proof Outside Micrometer (293-186-30) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-182 103 Series 5 to 6" SAE Mechanical Outside Micrometer - 103 Series™ 5 to 6" SAE Mechanical Outside Micrometer (103-182) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 115 Series 0 to 1" SAE Mechanical Spherical Face Outside Micrometer - 115 Series™ 0 to 1" SAE Mechanical Spherical Face Outside Micrometer (115-153) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 129 Series 0 to 12" SAE Mechanical Interchangeable Rod Type Depth Micrometer - 129 Series™ 0 to 12" SAE Mechanical Interchangeable Rod Type Depth Micrometer (129-149) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Mitutoyo 103-221 103 Series 6 to 7" SAE Mechanical Outside Micrometer - 103 Series™ 6 to 7" SAE Mechanical Outside Micrometer (103-221) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 445BZ-3RL 445 Series 0 to 3" SAE Mechanical Depth Micrometer - 445 Series™ 0 to 3" SAE Mechanical Depth Micrometer (445BZ-3RL) by Starrett®. The Starrett 440, 440M, 445, 445M Series Depth Micrometer features a combination ratchet and speeder, ring-type locknut, ratchet stop and locknut. 0-3" Range, 4" Base, 3 Rods, Ratchet Stop, Lock Nut, Case.
- Starrett T2XRL 2 Series 1 to 2" SAE Outside Micrometer - 2 Series™ 1 to 2" SAE Outside Micrometer (T2XRL) by Starrett®. The Starrett 2 & 2M Outside Micrometer features ratchet stop, lock nut, carbide face, and 1" gage block standard. 1"-2", .0001" Grad, Ratchet Stop, Lock Nut, Carbide Faces.
- Starrett 445AZ-9RL 445 Series 0 to 9" SAE Mechanical Depth Micrometer - 445 Series™ 0 to 9" SAE Mechanical Depth Micrometer (445AZ-9RL) by Starrett®. The Starrett 440, 440M, 445, 445M Series Depth Micrometer features a combination ratchet and speeder, ring-type locknut, ratchet stop and locknut. 0-9" Range, 3" Base, 9 Rods, Ratchet Stop, Lock Nut, Case.
- 449 Series 0 to 3" SAE Mechanical Depth Micrometer w Non-Rotating Blade - 449 Series™ 0 to 3" SAE Mechanical Depth Micrometer with Non-Rotating Blade (449BZ-3R) by Starrett®. The Starrett 449, 449M Series Micrometer Depth Gage with Non-Rotating Blade includes a .045" thick x 1/8" wide (1.2 x 3.2mm) blade that can be turned with the fingers and positioned at any angle relative to the base. In operation, the blade does not turn, but moves perpendicularly only, permitting depth measurement of narrow shoulders without the blade rolling off. This is also ideal for slots and recesses as narrow as .045" (1.2mm). Furnished with a 2-1/2" (63mm) or a 4" (100mm) base. 0-3" Range, .001" Grad, 4" Base, 3 Rods, in Case.
- Starrett T436.1XRL-1 436 Series 0 to 1" SAE Mechanical Outside Micrometer - 436 Series™ 0 to 1" SAE Mechanical Outside Micrometer (T436.1XRL-1) by Starrett®. The Starrett 436.1 Outside Micrometer features 0-1" range, ratchet stop, lock nut, carbide face, .0001" Grad, Ratchet Stop, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 216 Series 1 to 2" SAE Mechanical Digit Counter Outside Micrometer - 216 Series™ 1 to 2" SAE Mechanical Digit Counter Outside Micrometer (T216XRL-2) by Starrett®. The Starrett 216 Digital Micrometer is a mechanical digital micrometer - simple to use even by the inexperienced. The anvil and spindle are sized at .250" (6.35mm). 2", .0001" Grad, Carbide Faces, Ratchet Stop, Lock Nut.
- Starrett T226XRL-3 226 Series 2 to 3" SAE Mechanical Outside Micrometer - 226 Series™ 2 to 3" SAE Mechanical Outside Micrometer (T226XRL-3) by Starrett®. The Starrett 226 & 226M Series Outside Micrometer includes measurements at every thousandth of an inch for quick readings. Its no-glare satin chrome finish minimizes annoying surface glare under bright lights indoors or filters out UV light. Its balanced frame and thimble design ensures easy handling and better readability. The rugged frame and hard and stable one-piece thimble provides durability for extended product life. This model includes a 2-3" measuring range, ratchet stop, lock nut, and .0001" graduation. Starrett electronic micrometers guarantee a precise measurement at every position each and every time. 3", .0001" Grad, Carbide Faces, Ratchet Stop, Lock Nut.
- Starrett 237 Series 0 to 150 mm Metric Steel Rule Depth Gauge - 237 Series™ 0 to 150 mm Metric Steel Rule Depth Gauge by Starrett®. These very handy depth gages can be used to quickly obtain measurements in 64th of an inch or 1/2mm by simply adjusting the rule to the required depth. 0-150mm Range, mm/1/2mm.
- Mitutoyo 547 Series 0 to 8" SAE & Metric Digital Absolute Depth Gauge - 547 Series™ 0 to 8" SAE and Metric Digital Absolute Depth Gauge (547-217S) by Mitutoyo®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 436.1XRL-1 436 Series 0 to 1" SAE Mechanical Outside Micrometer - 436 Series™ 0 to 1" SAE Mechanical Outside Micrometer (436.1XRL-1) by Starrett®. The Starrett 436.1 Outside Micrometer features ratchet stop, lock nut, and carbide face, and .001" Grad, Ratchet Stop, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett T436.1XFL-2 436 Series 1 to 2" SAE Mechanical Outside Micrometer - 436 Series™ 1 to 2" SAE Mechanical Outside Micrometer (T436.1XFL-2) by Starrett®. The Starrett 436.1 Outside Micrometer features 1-2" range, friction thimble, lock nut, carbide face, .0001" Grad, Friction Thimble, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 449 Series 0 to 6" SAE Mechanical Depth Micrometer w Non-Rotating Blade - 449 Series™ 0 to 6" SAE Mechanical Depth Micrometer with Non-Rotating Blade (449BZ-6R) by Starrett®. The Starrett 449, 449M Series Micrometer Depth Gage with Non-Rotating Blade includes a .045" thick x 1/8" wide (1.2 x 3.2mm) blade that can be turned with the fingers and positioned at any angle relative to the base. In operation, the blade does not turn, but moves perpendicularly only, permitting depth measurement of narrow shoulders without the blade rolling off. This is also ideal for slots and recesses as narrow as .045" (1.2mm). Furnished with a 2-1/2" (63mm) or a 4" (100mm) base. 0-6" Range, .001" Grad, 4" Base, 6 Rods, in Case.
- Starrett 445BZ-12RL 445 Series 0 to 12" SAE Mechanical Depth Micrometer - 445 Series™ 0 to 12" SAE Mechanical Depth Micrometer (445BZ-12RL) by Starrett®. The Starrett 440, 440M, 445, 445M Series Depth Micrometer features a combination ratchet and speeder, ring-type locknut, ratchet stop and locknut. 0-12" Range, 4" Base, 12 Rods, Ratchet Stop, Lock Nut, Case.
- Starrett 216 Series 4 to 5" SAE Mechanical Digit Counter Outside Micrometer - 216 Series™ 4 to 5" SAE Mechanical Digit Counter Outside Micrometer (T216XRL-5) by Starrett®. The Starrett 216 Digital Micrometer is a mechanical digital micrometer - simple to use even by the inexperienced. The anvil and spindle are sized at .250" (6.35mm). 5", .0001" Grad, Carbide Faces, Ratchet Stop, Lock Nut.
- 449 Series 0 to 3" SAE Mechanical Depth Micrometer w Non-Rotating Blade - 449 Series™ 0 to 3" SAE Mechanical Depth Micrometer with Non-Rotating Blade (449AZ-3R) by Starrett®. The Starrett 449, 449M Series Micrometer Depth Gage with Non-Rotating Blade includes a .045" thick x 1/8" wide (1.2 x 3.2mm) blade that can be turned with the fingers and positioned at any angle relative to the base. In operation, the blade does not turn, but moves perpendicularly only, permitting depth measurement of narrow shoulders without the blade rolling off. This is also ideal for slots and recesses as narrow as .045" (1.2mm). Furnished with a 2-1/2" (63mm) or a 4" (100mm) base. 0-3" Range, .001" Grad, 2 1/2" Base, 3 Rods, in Case.
- Starrett T444.1XRL-5 444 Series 4 to 5" SAE Mechanical Outside Micrometer - 444 Series™ 4 to 5" SAE Mechanical Outside Micrometer (T444.1XRL-5) by Starrett®. The Starrett 444.1 Outside Micrometer features ratchet stop, lock nut, and carbide face.0001" Grad, Ratchet Stop, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 216 Series 0 to 1" SAE Mechanical Digit Counter Outside Micrometer - 216 Series™ 0 to 1" SAE Mechanical Digit Counter Outside Micrometer (T216XRL-1) by Starrett®. The Starrett 216 Digital Micrometer is a mechanical digital micrometer - simple to use even by the inexperienced. The anvil and spindle are sized at .250" (6.35mm). 1", .0001" Grad, Carbide Faces, Ratchet Stop, Lock Nut.
- Starrett 216 Series 10 to 11" SAE Mechanical Digit Counter Outside Micrometer - 216 Series™ 10 to 11" SAE Mechanical Digit Counter Outside Micrometer (T216XRL-11) by Starrett®. The Starrett 216 Digital Micrometer is a mechanical digital micrometer - simple to use even by the inexperienced. The anvil and spindle are sized at .250" (6.35mm). 11", .0001" Grad, Carbide Faces, Ratchet Stop, Lock Nut.
- 232 Series 0.200" SAE & Metric Micrometer Ball Attachment for 232 Starrett® 232 - 232 Series™ 0.200" SAE and Metric Micrometer Ball Attachment for 232 Series Micrometers and 463 Series Micrometer Heads by Starrett®. For 232 Series Micrometers and 463 Series Micrometer Heads, .200" diameter Anvil and Spindle .200" Diameter Anvils. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett T444.1XRL-6 444 Series 5 to 6" SAE Mechanical Outside Micrometer - 444 Series™ 5 to 6" SAE Mechanical Outside Micrometer (T444.1XRL-6) by Starrett®. The Starrett 444.1 Outside Micrometer features ratchet stop, lock nut, and carbide face.0001" Grad, Ratchet Stop, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 216 Series 5 to 6" SAE Mechanical Digit Counter Outside Micrometer - 216 Series™ 5 to 6" SAE Mechanical Digit Counter Outside Micrometer (T216XRL-6) by Starrett®. The Starrett 216 Digital Micrometer is a mechanical digital micrometer - simple to use even by the inexperienced. The anvil and spindle are sized at .250" (6.35mm). 6", .0001" Grad, Carbide Faces, Ratchet Stop, Lock Nut.
- Starrett 643J 643 Series 0 to 0.125" SAE Dial Depth Gauge - 643 Series™ 0 to 0.125" SAE Dial Depth Gauge (643J) by Starrett®. The Starrett 643 Dial Depth Gage has a knife-edge base and a needle point contact which has been hardened and ground. The knife-edge base has a cutout so that the conical point can be precisely positioned for close work. Point is 1/2" (12.7 mm) long with a 40 Deg included angle. In action, the inspector gently pushes the point down to read zero with the base and then pushes down to make the needle point contact the workpiece to take the measurement. 0-.125" Range, .0005" Grad, 0-25-0 Dial.
- Starrett 230 Series 0 to 1" SAE Mechanical Outside Micrometer - 230 Series™ 0 to 1" SAE Mechanical Outside Micrometer by Starrett®. The Starrett 230 & 230M Outside Micrometer includes 0-1" range, friction thimble, lock nut, carbide face, 0-1" Range, .0001" Grad, Carbide Faces, Friction Thimble, Lock Nut.
- Starrett 440Z-3RL 440 Series 0 to 3" SAE Mechanical Depth Micrometer - 440 Series™ 0 to 3" SAE Mechanical Depth Micrometer (440Z-3RL) by Starrett®. The Starrett 440, 440M, 445, 445M Series Depth Micrometer features a combination ratchet and speeder, ring-type locknut, ratchet stop and locknut. 0-3" Range, 2 1/2" Base, 3 Rods, Ratchet Stop, Lock Nut, Case.
- Starrett T444.1XRL-1 444 Series 0 to 1" SAE Mechanical Outside Micrometer - 444 Series™ 0 to 1" SAE Mechanical Outside Micrometer (T444.1XRL-1) by Starrett®. The Starrett 444.1 Outside Micrometer features ratchet stop, lock nut, and carbide face.0001" Grad, Ratchet Stop, Lock Nut, Carbide Faces. Setting standard included. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 445BZ-6RL 440 Series 0 to 6" SAE Mechanical Depth Micrometer - 440 Series™ 0 to 6" SAE Mechanical Depth Micrometer (445BZ-6RL) by Starrett®. The Starrett 440, 440M, 445, 445M Series Depth Micrometer features a combination ratchet and speeder, ring-type locknut, ratchet stop and locknut. 0-6" Range, 4" Base, 6 Rods, Ratchet Stop, Lock Nut, Case.
- Starrett T436.1XRL-4 436 Series 3 to 4" SAE Mechanical Outside Micrometer - 436 Series™ 3 to 4" SAE Mechanical Outside Micrometer (T436.1XRL-4) by Starrett®. The Starrett 436.1 Outside Micrometer features 3-4" range, ratchet stop, lock nut, carbide face, .0001" Grad, Ratchet Stop, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 445DZ-3RL 445 Series 0 to 3" SAE Mechanical Depth Micrometer - 445 Series™ 0 to 3" SAE Mechanical Depth Micrometer (445DZ-3RL) by Starrett®. The Starrett 440, 440M, 445, 445M Series Depth Micrometer features a combination ratchet and speeder, ring-type locknut, ratchet stop and locknut. 0-3" Range, 6" Base, 3 Rods, Ratchet Stop, Lock Nut, Case.
- Starrett 436 Series 3-piece SAE Mechanical Outside Micrometer Set - 436 Series™ 3-piece SAE Mechanical Outside Micrometer Set (ST436.1AXRLZ) by Starrett®. The Starrett S436.1 Outside Micrometer Set includes 1", 2", and 3" micrometers, two standards, adjusting wrench, in case. The most popular precision micrometers used by skilled workmen worldwide. Anvils sized at .250" (6.35mm) diameter for ease of use on larger work. This model features 0-3" Measuring Range. Smooth friction thimble for uniform pressure, the combination ratchet and speeder for uniform pressure and quicker adjustment, or a plain micrometer that depends on your own feel. Recommended for mechanics, automotive service and machine shops, toolrooms, inspection departments and wherever gaging involves a wide range of measurements. SET, 0-3", .0001" Grad, Carbide Faces, Ratchet Stop, Lock Nut involves a wide range of measurements.
- Starrett T444.1XRL-3 444 Series 2 to 3" SAE Mechanical Outside Micrometer - 444 Series™ 2 to 3" SAE Mechanical Outside Micrometer (T444.1XRL-3) by Starrett®. The Starrett 444.1 Outside Micrometer features ratchet stop, lock nut, and carbide face.0001" Grad, Ratchet Stop, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett T436.1XRL-3 436 Series 2 to 3" SAE Mechanical Outside Micrometer - 436 Series™ 2 to 3" SAE Mechanical Outside Micrometer (T436.1XRL-3) by Starrett®. The Starrett 436.1 Outside Micrometer features 2-3" range, ratchet stop, lock nut, carbide face, .0001" Grad, Ratchet Stop, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 0 to 6" SAE Steel Slide Depth Gauge - 0 to 6" SAE Steel Slide Depth Gauge by Starrett®. The Combination Steel Rule Depth/Angle Gage is a versatile gage that can be used for calipering, a depth gage by reversing the rule, a protractor, and a hook rule when removed from the tool. It is a simple, handy tool that is a welcome addition to any machinist's toolbox.
- Starrett 569BXP 569 Series 0 to 1" SAE Mechanical Outside Tube Micrometer - 569 Series™ 0 to 1" SAE Mechanical Outside Tube Micrometer (569BXP) by Starrett®. The Starrett 569 Tube Micrometer is used for measuring the wall thickness of tubing and other parts with cylindrical walls. Also for measuring from a hole to an edge (note minimum hole sizes in table). Rigid steel half frame with smooth black enamel finish. Anvil diameter = 0.185". 0-1" Range, .001" Grad, 3/8" min. hole size, Plain, Carbide Spindle.
- 247 Series 0.200" Micrometer Ball Attachments for 224 Starrett® 247 Series™ - 247 Series™ 0.200" Micrometer Ball Attachments for 224A, 224Aa and 436 Series Micrometers (247B) by Starrett®. For 224A, 224AA and 436 Series Micrometers, .270" diameter Anvil and Spindle .270" Diameter Anvils. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 445DZ-12RL 445 Series 0 to 12" SAE Mechanical Depth Micrometer - 445 Series™ 0 to 12" SAE Mechanical Depth Micrometer (445DZ-12RL) by Starrett®. The Starrett 440, 440M, 445, 445M Series Depth Micrometer features a combination ratchet and speeder, ring-type locknut, ratchet stop and locknut. 0-12" Range, 6" Base, 12 Rods, Ratchet Stop, Lock Nut, Case.
- Starrett T444.1XRL-2 444 Series 1 to 2" SAE Mechanical Outside Micrometer - 444 Series™ 1 to 2" SAE Mechanical Outside Micrometer (T444.1XRL-2) by Starrett®. The Starrett 444.1 Outside Micrometer features ratchet stop, lock nut, and carbide face.0001" Grad, Ratchet Stop, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 440Z-6RL 440 Series 0 to 6" SAE Mechanical Depth Micrometer - 440 Series™ 0 to 6" SAE Mechanical Depth Micrometer (440Z-6RL) by Starrett®. The Starrett 440, 440M, 445, 445M Series Depth Micrometer features a combination ratchet and speeder, ring-type locknut, ratchet stop and locknut. 0-6" Range, 2 1/2" Base, 6 Rods, Ratchet Stop, Lock Nut, Case.
- Starrett 445DZ-9RL 440 Series 0 to 9" SAE Mechanical Depth Micrometer - 440 Series™ 0 to 9" SAE Mechanical Depth Micrometer (445DZ-9RL) by Starrett®. The Starrett 440, 440M, 445, 445M Series Depth Micrometer features a combination ratchet and speeder, ring-type locknut, ratchet stop and locknut. 0-9" Range, 6" Base, 9 Rods, Ratchet Stop, Lock Nut, Case.
- Starrett 247 Series 0.200" SAE Micrometer Ball Attachments - 247 Series™ 0.200" SAE Micrometer Ball Attachments by Starrett®. For 216, 231, 436.1, 733, 734, 3734, 1212 and 1230 Micrometers, .250" diameter Anvil and Spindle .250" Diameter Anvils. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 216 Series 3 to 4" SAE Mechanical Digit Counter Outside Micrometer - 216 Series™ 3 to 4" SAE Mechanical Digit Counter Outside Micrometer (T216XRL-4) by Starrett®. The Starrett 216 Digital Micrometer is a mechanical digital micrometer - simple to use even by the inexperienced. The anvil and spindle are sized at .250" (6.35mm). 4", .0001" Grad, Carbide Faces, Ratchet Stop, Lock Nut.
- Starrett 436.1XRL-2 436 Series 1 to 2" SAE Mechanical Outside Micrometer - 436 Series™ 1 to 2" SAE Mechanical Outside Micrometer (436.1XRL-2) by Starrett®. The Starrett 436.1 Outside Micrometer features ratchet stop, lock nut, and carbide face.001" Grad, Ratchet Stop, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett T436.1XFL-3 436 Series 2 to 3" SAE Mechanical Outside Micrometer - 436 Series™ 2 to 3" SAE Mechanical Outside Micrometer (T436.1XFL-3) by Starrett®. The Starrett 436.1 Outside Micrometer features 2-3" range, friction thimble, lock nut, carbide face, .0001" Grad, Friction Thimble, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 440Z-3L 440 Series 0 to 3" SAE Mechanical Depth Micrometer - 440 Series™ 0 to 3" SAE Mechanical Depth Micrometer (440Z-3L) by Starrett®. The Starrett 440, 440M, 445, 445M Series Depth Micrometer features a combination ratchet and speeder, ring-type locknut, ratchet stop and locknut. 0-3" Range, 2 1/2" Base, 3 Rods, Lock Nut, Case.
- Starrett 436.1FL-3 436 Series 2 to 3" SAE Mechanical Outside Micrometer - 436 Series™ 2 to 3" SAE Mechanical Outside Micrometer (436.1FL-3) by Starrett®. The Starrett 436.1 Outside Micrometer features 2-3" range, friction thimble and lock nut.001" Grad, Friction Thimble, Lock Nut. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Starrett 445BZ-9RL 445 Series 0 to 9" SAE Mechanical Depth Micrometer - 445 Series™ 0 to 9" SAE Mechanical Depth Micrometer (445BZ-9RL) by Starrett®. The Starrett 440, 440M, 445, 445M Series Depth Micrometer features a combination ratchet and speeder, ring-type locknut, ratchet stop and locknut. 0-9" Range, 4" Base, 9 Rods, Ratchet Stop, Lock Nut, Case.
- Starrett T436.1XFL-1 436 Series 0 to 1" SAE Mechanical Outside Micrometer - 436 Series™ 0 to 1" SAE Mechanical Outside Micrometer (T436.1XFL-1) by Starrett®. The Starrett 436.1 Outside Micrometer features 0-1" range, friction thimble, lock nut, carbide .0001" Grad, Friction Thimble, Lock Nut, Carbide Faces. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- 72-229 Series 0 to 4" SAE Mechanical Outside Micrometer Set - 72-229 Series™ 0 to 4" SAE Mechanical Outside Micrometer Set by Fowler High Precision®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- X-Tra-Value II 0 to 1" SAE & Metric Digital Outside Micrometer - X-Tra-Value II™ 0 to 1" SAE and Metric Digital Outside Micrometer by Fowler High Precision®. If you’re looking for a reliable solution to get your job done with the ultimate accuracy, this top-notch measuring tool is right up to your alley. It is designed to help you maintain precision quality control on all the stages of your project. Made utilizing industry-leading materials and high-end equipment, this tool features an ergonomic design for uncompromising comfort and ease of use.
- Vintage Handy Henry L Hanson Micrometer Machinist Tool USA C6 - The color of an item/s may appear different in person due to the lighting in the photographs.
- 【 Near Mint】Mitutoyo 150-175" Mechanical Outside Micrometer - Blue - Grade : Near Mint. Work properly. Appearance of the item.
- Mitutoyo 534-118 Vernier Caliper, Steel, Nib Style, Long Jaw, 0-20" Range,... - The scales are raised to slide easily and protect the graduation markings. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale.
- 6Pcs Set 5/16''- 6‘’ Precision Telescopic Gage Micrometer Bore Measurement Tool - Quantity: 6pcs. Precision: 0.01. Size: 20 x 16 cm. Size A: 5/16"-1/2" (8mm to 12.7cm). Size B: 1/2"- 3/4" (12.7mm to 19mm). Color: Silver. Durable and long service life.
- Digital Thickness Meter Electronic Micrometer 0.01mm LCD Handle+Box 12.7mm 0.5'' - Large, easy-to-read LCD. - Real Range :0-12.7mm. - Accuracy: 0.01mm. - Power: One 1.55V battery(Not Included). is provided once the item is dispatched. - Manual ON/OFF or automatic power off.
- Olympus UM-3R Ultrasonic Probe 20MHZ 27257 - Let's solve the problem together . I'm sorry to trouble you. I'm sorry. Perfect Inspection by Japanese Staff with High Skills. Nothing is difficult. Don't worry. Answer . For example, if you want 3 products.
- X Micrometer Manual FinE Tuning Roller Precision Linear Stages 80*80mm - Table Size: 80 80mm. Rail Type: Roller Type. Precision machining and stable performance. Stroke:±12.5mm. Size: Approx. 165 92 24.5mm / 6.5 3.6 1.0in. Material: Aluminium Alloy(black anodized ).
- Vintage Starrett Wood Case BOX ONLY For 0-6" Micrometer Set No. 436 & 226 - It will fit the set no. 226 and no. 436.
- *Mitutoyo (Mitutoyo) both spherical micrometer BMD-25MX 395-271-30 - We may not be able to send it to countries which prohibit importing lithium. Instruction manual could be written in Japanese. Middle East.
- New Mitutoyo Digital Micro Meter 3-Piece Set 50-75mm 25-50mm 0-25mm - Our products are 100% authentic!
- VIS Made in Poland Outside Micrometer, 0-1" Range .0001" Graduation - Graduation.0001". The item you receive will be either the item pictured or comparable (or better) in appearance. Range: 0-1".
- Starrett T436RL-12 Outside Micrometer, 11-12" Range, .0001" Graduation - Graduation.0001". Range: 11-12". This item is professionally inspected and verified by our. With ratchet stop.
- Starrett T436XRL-12 Outside Micrometer, 11-12" Range, .0001" Graduation - Graduation.0001". Range: 11-12".
- Starrett T436XRL-11 Outside Micrometer, 10-11" Range, .0001" Graduation - Graduation.0001". Range: 10-11".
- Starrett No 230 Outside Micrometer 0-1" range, .0001" increments with Case - Starrett No 230 Outside Micrometer 0-1" range, .0001" increments with Case.
- STARRETT AMI-208RZ Can Seam Micrometer SS Stainless Steel NEW
- Mitutoyo 0-6" Depth Micrometer Set With 4” Base In Case 129-132 - Mitutoyo 0-6" Depth Micrometer Set With 4” Base In Case 129-132. It is used but is in very good shape, please see photos. F
- Starrett Series 436 1-3" Outside Micrometer Set Missing 4-6" - Starrett Series 436 1-3" Outside Micrometer Set Missing 4-6"
- Starrett T436RL-10 Outside Micrometer, 9-10" Range, .0001" Graduation - Graduation.0001". Range: 9-10". This item is professionally inspected and verified by our. With ratchet stop.
- Starrett T436XRL-10 Outside Micrometer, 9-10" Range, .0001" Graduation - Graduation.0001". Range: 9-10".
- Starrett T436.1RL-2 Outside Micrometer, 1-2" Range, .0001" Graduation - Graduation.0001". Range: 1-2". This item is professionally inspected and verified by our. With ratchet stop.
- Mitutoyo 115-153 Series 115 Spherical Face Micrometers - Anvil Tip Type Spherical. Local pick up is not available. Order No: 115-153. Display Type Vernier. Spindle Tip Type Cylindrical.
- 2Pcs ICARBIDE OUTSIDE MICOMRETER 0-25MM CARBIDE TIP PRECISION MEASURE TOOL - PRECISION :0.01MM. TEST BAR INCLUDED. The ratchet set the device to ensure accurate repeatability. Screw stop setter easy for use.
- NSK Rolling Digital Micrometer 0-1" Range, .0001" - NSK Rolling Digital Micrometer 0-1" Range, .0001" Graduation Japan. Lightly used small scuffs on paint. Great condition overall.
- Findmall 4-5"/0.0001" Precision Outside Micrometer Carbide Tipped Micrometer - Specification: 4-5" x 0.0001" precision outside micrometer. carbide tipped measuring face ratched stop. lock nut. 0.0001" graduation reading Woth 4" standard. Feature： This product has undergone rigorous quality testing Durable and easy to install and replace The most cost-effective and best after-sales service Quality assurance that gives you peace of mind Package Including： As The Picture Shows .
- Vintage L.S. Starrett No. 230 Micrometer 0-1” .0001” - Vintage L.S. Starrett No. 230 Micrometer 0-1” .0001”. Carbide faces with ratchet thimble.
- Starrett 823AZ 1-1/2" to 8" Tubular Inside Micrometer with case and box - Starrett 823AZ 1-1/2" to 8" Tubular Inside Micrometer with case and box, used like new. Minimal rust on one piece showed in image
- Mitutoyo Multi Mike Series 146 - Mitutoyo Multi Mike Series 146. I'm a retired machinest, this was given to me by an old friend. Honestly, neither of us know specifically what it is for or exactly how it is used. I can verify that the micrometer aspect works properly and smoothly and zeros at .000 and 1.000. I believe the item is sound, but look closely at all photos.
- NEW iCarbide 0-1" INCH OUTSIDE MiCROMETER MEASURE TOOLS US SELL - The ratchet set the device to ensure accurate repeatability. RANGE 1-2" 0.0001".
- STARRETT INSIDE MICROMETER SET NO 124 w/ WOOD CASE - 2-8 INCHES VINTAGE - Brand new box is old
- Boeckeler Instruments Microcode ll - Boeckeler Instruments Microcode ll. Powers on, otherwise untested
- Vintage Brown & Sharpe Micrometer 2-3" with original case
- VINTAGE ETALON 0-1" MICROMETER MADE IN Switzerland - VINTAGE ETALON 0-1" MICROMETER MADE IN Switzerland.(B19-60)
- H.P.C. INC Outside Micrometer Made In USA 0-1” - H.P.C. INC Outside Micrometer Made In USA 0-1”. Used but in great condition. Please see photos. F
- STARRETT No.576 Micrometer Caliper 0 - 1/2" Made in USA - Made in USA. No Case !
- Cyclecyl Boremaster Micrometer Block - Cyclecyl Boremaster Micrometer Block. Custom made for boremaster boreing bar. Allow 2 weeks custom build to order.
- Insize 3101-100A Digital Outside Micrometer Range 75-100mm/3-4″ IP65 Waterproof - IP65 dust/waterproof. 75-100mm/3-4″.
- Starrett 124CZ Solid Rod Inside Micrometer Set, 8-32" Range, .001" Graduation - Graduation.001". Hardened and ground anvils. Range: 8-32".
- Insize 3101-75A Digital Outside Micrometer Range 50-75mm/2-3″ IP65 Waterproof - IP65 dust/waterproof. 50-75mm/2-3″.
- Misumi LS-5042-S8-2 Manual X-Axis High Grade Chuo Micrometer 2" x 2" (10348) - Manufacturer: Misumi, Chuo Precision Industrial. Model: LS-5042-S8-2. LIMITED WARRANTY.
- Mitutoyo 293-186-30 QuantuMike Coolant Proof Micrometer, 1 to 2" (25.4 to 50.8 - Resolution 0.00005" (0.001 mm). Range 1 to 2" (25.4 to 50.8 mm). Accuracy 0.00005" (0.001 mm). Local pick up is not available. Carrying Case. Model: 293-186-30. Standard Bar.
- Starrett 124 Series Inside Micrometer Set 2" to 12" - An older set in good used condition. As you can see in the photos it has been engraved by its original owner. $12.00 for priority mail.
- Starrett Micrometer Caliper: 1 Inch (Catalog # 230FL) - We will NOT declare on a US custom form that this is a gift.
- Telescopic Gauge Set 8Mm-150Mm Adjustable Inner Diameter Gauge 6Pcs Telescopic - Super quality, high rigidness, good wear resistance, durable in use.
- Mitutoyo 149-148 Micrometer Head
- Mitutoyo 342-351-30 Digimatic Point Micrometer, 0-1"/0-25mm Range, .00005"/0.001 - Mitutoyo 342-351-30 Digimatic Point Micrometer, 0-1"/0-25mm Range, .00005"/0.001. Return Policy: Item may be returned within 30 days of item delivery if original item is unused and in brand new condition. Buyer pays for the shipping.Thanks so much for looking at my sale/auction and please do not hesitate to contact me should you have any questions
- Mitutoyo Thread Micrometer Set 1-2, 2-3, 3-4 No Etchings Excellent - The cases are in good shape. Details listed below. Anvil Set M1-M6. 126-140 = 3-4" (126-140A).
- Mitutoyo 293-960-30 Micrometer Set,Digital - Light Industrial. Knipex 95 05 155 Sba Electrician Shears,6-1/4",Stainless Stl. & Recepticles. Electrical Outlets. and Enclosures. Electrical Boxes. General Purpose. & Industrial.
- Insize 3203-100A Outside Micrometer Range 75-100mm Graduation 0.01mm - Graduation: 0.01mm.
- Insize 3101-50A Digital Outside Micrometer Range 25-50mm/1-2″ IP65 Waterproof - IP65 dust/waterproof. 25-50mm/1-2″.
- Insize 3109-175A Digital Outside Micrometer Range 150-175mm/6-7″ Basic Type - Supplied with spherical anvil. Basic Type, Without Data Output. 150-175mm/6-7″.
- Insize 3101-25A Digital Outside Micrometer Range 0-25mm/0-1″ IP65 Waterproof - IP65 dust/waterproof. 0-25mm/0-1″.
- Starrett 585d Micrometer 1-2” Thread 22-30p - Starrett 585d Micrometer 1-2” Thread 22-30p.
- Insize 3109-200A Digital Outside Micrometer Range 175-200mm/7-8″ Basic Type - Supplied with spherical anvil. Basic Type, Without Data Output. 175-200mm/7-8″.
- Insize 3109-150A Digital Outside Micrometer Range 125-150mm/5-6″ Basic Type - Supplied with spherical anvil. Basic Type, Without Data Output. 125-150mm/5-6″.
- Starrett 1-2" v anvil mic #T483XRL - Starrett 1-2" v anvil mic #T483XRL.Carbide tipped with .0001 graduation
- Insize 3109-75A Digital Outside Micrometer Range 50-75mm/2-3″ Basic Type - Supplied with spherical anvil. Basic Type, Without Data Output. 50-75mm/2-3″.
- Mitutoyo 103-188 Outside Micrometer, 11-12" Range, .001" Graduation, Japan - Mitutoyo 103-188 11"-12" OD Mic with carbide tips. Comes with wooden case and 11" standard, will also include long form calibration certificate! Has "LMIP7" engraved.
- Insize 3109-125A Digital Outside Micrometer Range 100-125mm/4-5″ Basic Type - Supplied with spherical anvil. Basic Type, Without Data Output. 100-125mm/4-5″.
- Misumi LS-5042-SR8-2 High Grade X-Axis Manual Stage Micrometer, Chuo Seiki 10347 - Misumi LS-5042-SR8-2 High Grade X-Axis Manual Stage with Micrometer, Chuo Seiki 10347 USED Manufacturer: Misumi, Chuo Seiki Model: LS-5042-SR8-2 C8617R.
- VINTAGE L.S. STARRETT No.440 DEPTH MICROMETER in Orig. box USA Athol Mass - Box USA Athol Mass. The picture shown is the item you will receive.
- Workhorse .2-1.2" Inside Micrometer
- Vintage L.S. Starrett Co No. T2RL Micrometer Gage Block Wrench Leather Case - Only what is shown is included.
- NSK Japan Depth Micrometer
- Tool #222 Machine Repair Tool Maker Misc Shop Tools Big Lot of Mill Cutters - A few of the end mills need sharpening, but a super nice collection for the price! 4 flute 9/16" ground down to. 475. 2 flute 1/2" ground down to. 482. 2 flute 9/16" double ended. 4 flute 1/2" double ended.
- ⭐Cdi⭐ Depth Micrometer**Government Surplus**
- Insize 3203-75A Outside Micrometer Range 50-75mm Graduation 0.01mm - Graduation: 0.01mm.
- Insize 3109-100A Digital Outside Micrometer Range 75-100mm/3-4″ Basic Type - Supplied with spherical anvil. Basic Type, Without Data Output. 75-100mm/3-4″.
- Vintage Central Tool Company Tool Kit RED BOX SUARE Cranston Rhode Island USA - Vintage Central Tool Company Tool Kit RED BOX SUARE Cranston Rhode Island USA. Dial indicator.very good condition
- Insize 3203-25A Outside Micrometer Range 0-25mm Graduation 0.01mm - Graduation: 0.01mm.
- Mitutoyo 293-831-30 Digimatic Micrometer Series 293 MDC-Lite - Resolution: 0.001mm or. 00005"/0.001mm. Local pick up is not available. Supplied in fitted plastic case. Battery life: Approx. 1.2 years under normal use. Battery: SR44 (1 pc.). Display: LCD.
- Vintage Starrett Micrometer Caliper Tool # 230
- starrett micrometer depth gage - starrett micrometer depth gage.
- Vintage Lufkin Rule Co No. 212 Micrometer 0-3" Depth Gauge w/ Wood Case **NICE - Vintage Lufkin Rule Co No. 212 Micrometer 0-3" Depth Gauge w/ Wood Case **NICE. Working condition, please see photos. Check back for more quality vintage tools including Snap-on, Mac, Craftsman, Plumb, Bluegrass and more!
- Starrett 216 Digimatic
- Vintage Starrett 569 Tube Micrometer 0-1". .001" Increments Made In Usa - And other parts with cylindrical walls. Range (in) :0-1". Graduations (in) 001".
- Insize 3203-50A Outside Micrometer Range 25-50mm Graduation 0.01mm - Graduation: 0.01mm.
- Mitutoyo Depth Micrometer 129-128
- Dasqua 7111-1105 Micrometer Stand - Non marring. Lacquered cast iron base. Clamping capacity is 5/8". Base weight is 3 lbs. Lacquered cast iron base. We're happy to help. We do not accept P.O. Boxes. Item model number 7111-1105.
- Micrometer Stand with Double Non Slip Clamping Pad for Micrometers up to 4 - The main body is cast iron, and the fixture is equipped with rubber pads. We do not accept P.O. Boxes. We're happy to help. Item model number CA3856. Add to Favorite.
- Brown & Sharpe 8236-312 .0005” .075mm Range Dial Depth Gauge USA MADE TOOL. - Brown & Sharpe 8236-312 .0005” .075mm Range Dial Depth Gauge USA MADE TOOL.. scratches and marks but overall nice in working condition. Free shipping included with vintage Tool.
- Depth Gauge Plastic Dial Vernier Caliper Professional Micrometer High Precision - 1 x Dial Vernier Caliper. All number sizes are clear and can be easily read out. Made of high quality plastic, wear resistance,durable in use. Read value: 0.1mm. Material: Plastic. Add to Favorite. We're happy to help.
- 103-220A Mitutoyo 5"-6" - Mitutoyo 103-220A 5"-6" micrometer with standard and case. Has "DG" etched on handle. Will include long form certificate for micrometer and standard.
- 6" 150mm Digital Micrometer Caliper Measuring Tool LCD Vernier Gauge Metric tool - 1 x Digital Caliper. Large LCD Display: Shows instant readings with digital numbers, much more convenient. Auto On/Off: Auto turns on when sliding, auto turns off after 5mins if with no operation. Resolution: 0.01”/0.1mm.
- Brown & Sharpe 5-6" Micrometer Lock, Carbide Faces, Very Nice In Case Usa - VERY NICE TOOL, LIGHTLY USED, NO MARKINGS.
- Starrett Steel Anvil Micrometer 224
- SMC MHF2-8DR-M9PM Guided Table Slide - New
- Etalon 1-2" Indicating Micrometer 0.002 mm - Made in Switzerland by Etalon.
- Lufkin Rule Company No.1942, 1-2 inch Micrometer - For your consideration: a Lufkin 1 - 2" micrometer. In good condition. US Shipping only! All items sold as shown. Look the photos over carefully to know what you are buying. Ask questions if you have any concerns.
- Starrett Outside Micrometer 436 ~ 1" - For your consideration: a 1" micrometer made by Starrett. Good condition. US Shipping only! All items sold as shown. Look the photos over carefully to know what you are buying. Ask questions if you have any concerns.
- Vintage Lufkin Rule Machinist Outside Spring Loaded Caliper - 4 5/8" - Estate Fd - Outside Calipers. Spring Loaded.
- Telescopic Gauge Set 8Mm-150Mm Adjustable Inner Diameter Gauge 6Pcs Telescopic - Super quality, high rigidness, good wear resistance, durable in use.
- Insize 3109-50A Digital Outside Micrometer Range 25-50mm/1-2″ Basic Type - Supplied with spherical anvil. Basic Type, Without Data Output. 25-50mm/1-2″.
- Insize 3109-25A Digital Outside Micrometer Range 0-25mm/0-1″ Basic Type - Supplied with spherical anvil. Basic Type, Without Data Output. 0-25mm/0-1″.
- TESA BROWN & SHARPE 78.112382 Micrometer Gage,Range 0.794 to 1.000" - TESA BROWN & SHARPE 78.112382. Grainger reserves the right to accept or reject any order. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- WESTWARD 6XU73 Micrometer,Inside,2-12 - WESTWARD 6XU73. Power adapters and other modifications may be necessary for proper operation in other countries. Diversion contrary to U.S. law is prohibited. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC.
- Mitutoyo Digimatic micrometer 293-243-30 MDC-100px - [ Li-ion Battery ]. We do our best for you!! [ Multiple sizes and colors ].
- Mitutoyo Digimatic micrometer 293-242-30 MDC-75px - [ Li-ion Battery ]. We do our best for you!! [ Multiple sizes and colors ].
- Mitutoyo Digimatic micrometer 293-240-30 MDC-25px - [ Li-ion Battery ]. We do our best for you!! [ Multiple sizes and colors ].
- Mitutoyo Digimatic micrometer 293-241-30 MDC-50px - [ Li-ion Battery ]. We do our best for you!! [ Multiple sizes and colors ].
- NSK Japan Micrometer 0-6" - NSK JAPAN 0-6 MICROMETER, COMPLETE. CAME FROM RETIRED MACHINEST THAT WORKED IN DIESEL REPAIR, SHOWS AGE SHOWS USE, NO ISSUES, ADJUST FINE, DIAL VERY READABLE,
- Digital Micrometer, Professional Inch/Metric Thickness Measuring Tools 0.00005"/ - Ratchet stop for using flexible. ● Resolution 0.00005"/0.001mm. Hard protective case for protection. 1 Storage case. We're happy to help. We do not accept P.O. Boxes. 1 User Manual. Number of Batteries 2 Product Specific batteries required.
- 293-340-30 Digital Micrometer, Inch/Metric, Ratchet Stop, 0-1" (0-25.4Mm) Range, - With a standard bar except for 0-25mm/0-1" model. Auto power ON/OFF function. (50mm/2” or less range models). Ingress Protection certified IP65 for protection against dust and water. Resolution. 00005” / 0.001mm.
- Starrett Micrometer No. 3 - Starrett Micrometer No. 3.
- Mitutoyo Solar digital calipers 500-455 CD-S20CT Japan Used Item
- Fowler 52-253-004-1, Premium Outside Inch Micrometer With 3-4" Measuring Range - We're happy to help. We do not accept P.O. Boxes. Item model number 52-253-004-1. Country of Origin China.
- mitutoyo digital micrometer 0-1 - mitutoyo digital micrometer 0-1. Resolution .00005" / 0.001mmRange - 0-1"Power Source - Battery
- Micrometer Set 0-1, 1-2, 3-4, 4-5, 5-6
- Telescopic Gauge Set 8Mm-150Mm Adjustable Inner Diameter Gauge 6Pcs Telescopic - Super quality, high rigidness, good wear resistance, durable in use.
- Brown & Sharpe Micrometer No 19 up to 1" - Excellent Condition - Brown & Sharpe Micrometer No 19 up to 1" - Excellent Condition.
- Inside Micrometer Accurate Hole Bore Internal Diameter Gage Gauge 5-30mm Range - Inside Micrometer Accurate Hole Bore Internal Diameter Gage Gauge 5-30mm Range5-30mm Internal Micrometer 0.01mm Stainless Steel Accurate Screw Gauge Metric Inner Diameter Measuring ToolFeatures:brand new and .Name: internal micrometerColor: silverMaterial: stainless steelMeasuring range: 5-30mmPrecision: 0.01 mmNote:Transition: 1cm=10mm=0.39inchPlease allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!Package Includes:1 × Inside Micrometer1 × Wrench1 × Calibration Ring1 × Packing Box
- Fowler 52-253-004-1, Premium outside Inch Micrometer with 3-4" Measuring Range - The Vernier scale has 0.001" graduation intervals and ± 0.001″ accuracy for precise and accurate readings. We will work with you to resolve any problem you may have. Item model number 52-253-004-1.
- 7111-1105 Micrometer Stand - Non marring. Lacquered cast iron base. Clamping capacity is 5/8". Base weight is 3 lbs. Lacquered cast iron base.
- Mitutoyo Digimatic Micrometer MDC-75PX 293-242-30 50～75mm Digital Display - All my products are 100% Authentic.
- Mitutoyo Mitutoyo caliper type inside micrometer 50-75mm 0.01mm IMP-75 Japanese - Type Caliper type inside (analog). Minimum display amount (mm) 0.01. Item title. Arrived in about 2 weeks.
- MITUTOYO Mitutoyo Depth Gauge (Depth Micro) DMC60-75 Depth 0-75mm Japanese - Mitutoyo Depth Gauge (Depth Micro) DMC60-75 Depth 0-75mm. Although it is old, the spindle rotates lightly and the ratchet works well. Since it was not used much, the anvil surface is still shiny and has few scratches.
- Turmico Depth Micrometer Guage With Wooden Case - Turmico Depth Micrometer Guage With Wooden Case. E-135 / 48683. Hinge on box missing 2 screws. Missing parts (see pics). Please see pics as they are part of the condition description.
- TUMICO Outside Micrometer 6-9" #M-09LN. Wood Case. US Coast Guard Issue. - TUMICO Outside Micrometer 6-9" #M-09LN. Wood Case. US Coast Guard Issue.. Looks to be in usable condition. I don’t know much about calipers but seems to be in usable condition. The box is a little rough however bust still doing the job of protecting it. There’s cracks in the box and a clasp missing.
- Starrett T436RL-9 Outside Micrometer, 8-9" Range, .0001" Graduation - Graduation.0001". Range: 8-9". This item is professionally inspected and verified by our. With ratchet stop.
- Starrett T436RL-7 Outside Micrometer, 6-7" Range, .0001" Graduation - Graduation.0001". Range: 6-7". This item is professionally inspected and verified by our. With ratchet stop.
- Starrett T436.1RL-6 Outside Micrometer, 5-6" Range, .0001" Graduation - Graduation.0001". Range: 5-6". This item is professionally inspected and verified by our. With ratchet stop.
- Moore & Wright 1-2'' Micrometer No.966
- MITUTOYO 0-1" Outside Micrometer .001" Graduations Machinist Gauge No. 103-127
- Devlieg END MEASURING RODS & MICROMETERS, Spiromatic - Devlieg END MEASURING RODS & MICROMETERS, Spiromatic.
- Vintage L. S. Starrett No. 124 Inside Micrometer Set
- Central Tool Co.4 piece outside Micrometer set - Complete set.
- Starrett Outside Micrometer Set 0-6" w/ Standards & Wood Box *MADE IN USA* Tools - Set Includes -Starrett 5”-6” [No. 436]. -Starrett 4”-5” [No. 436]. -Starrett 3”-4” [No. 226]. -Starrett 2”-3” [No. 226]. -Starrett 1”-2” [No. 226].
- Mitutoyo cylinder gauge 511-128s 50-100 150 From Japan [Used] - Model Number:511-128s. ~Caustions~.
- Vintage Set of 6 Scherr Tumico Inc. Micrometer Tools
- Mitutoyo Holtest .275-.5 set - All in working order. Etchings in pics.
- Mitutoyo Holtest .5-.8 Set - Mitutoyo Holtest set. All in working order. Etchings in pics.
- Vintage Mitutoyo No. 103-127 Japan Micrometer Turns Smoothly - This listing is for a vintage Mitutoyo No. 103- 127 1" micrometer. It is in good working order.turns smoothly.
- The Lufkin Rule Co. No. 1911 Outside Micrometer 1" Used Good Working order - This listing is for a vintage The Lufkin Rule Co. No. 1911 1" micrometer. It is in good working order.
- The L.S. Starrtett No. 436 25mm-50 MM Outside Micrometer Mass. USA Used - This listing is for a Starrett No. 436 M 25mm-50 mm outside micrometer. It is in good working order. USED
- Vintage The L. S. Starret No. 436M 50-75 MM Micrometer , Mass. USA works - This listing is for a vintage The L. S. Starrett. No. 436 M 50MM-75Mm micrometer. It is in good working order. working condition.
- Vintage Brown & Sharpe MFG. Co. 65 3"-4" Micrometer 75-100 used - This listing is for a vintage Brown & Sharpe MFG. Co. model 65 3-4" micrometer. It has 75-100 stamped on it and also SKF. It is in working condition.
- Brown Sharpe Micrometers 69 67 63 - Brown Sharpe Micrometers 69 67 63 The "65" is goodell Pratt instead of b&s
- Tubular Micrometer Co. St. James , Minn. 2-3" USA Used - This listing is for a used tubular Micrometer Co. St. James , Minn. 2-3". It is used but it does work fine.
- Blackhawk Depth Micrometer - Blackhawk Depth Micrometer.spins freely, what you see is what you get,see pics for description
- Insize 3109-50A Digital Outside Micrometer Range 25-50mm/1-2″ Basic Type - Supplied with spherical anvil. Basic Type, Without Data Output. 25-50mm/1-2″.
- Mitutoyo Thread Micrometer Set 0-1, 1-2, 2-3, 3-4, 4-5 No Etchings Excellent - Details listed below. Anvil Set M1-M6. 126-141 = 4-5". 126-140 = 3-4".
- NEW Mitutoyo 103-135 0" - 1" .0001" OD Micrometer With Certificate Pristine ! - From an estate, here is a NEW Mitutoyo, No.103-135, 0 - 1 inch, .0001" scale, outside Micrometer with Certificate, adjusting tool and box. Made in Brazil. Please look at the pictures and ask your questions before you bid or buy. Check out our other sales as we are always adding new items.
- Pratt & Whitney Supermicrometer Upgraded w/Dual Digital Display supermic mike - Pratt & Whitney Supermicrometer With Dual Digital Display. Old world mechanical craftsmanship upgraded with dual digital display for ease of use and higher accuracy. Tailstock force mechanism updated with high accuracy probe and digital display to make sure force and zero point repeats. Headstock updated with a 1 inch range digital display using high accuracy glass scale probe. Parallelism and force checked good. Tailstock 10 millionths .00001" resolution. Headstock 10 millionths .00001" resolution. Maximum measuring length 10".
- Starrett Micrometer Caliper and two Starrett No. 655-2081 Dial Indicators - Starrett Micrometer Caliper and two Starrett No. 655-2081 Dial Indicators. Caliper in decent condition. Missing wrench or wrenches. Needs to be cleaned. One Dial indicator appears to need adjusted,I don't know how to do it so I didn't try. Lens has a few scratches. The other indicator is broken. It's the shaft that slides up and down. The lens on the broken one is in better condition than the one that needs to be adjusted. The last picture shows me pointing at the broken part on the indicator. Please look at all of the pictures as they are part of the description and the condition.
- MITUTOYO 8-40" Inside Micrometer Set 141-122 IMS 40 Interchangeable Rods .001" - Mitutoyo set in the wooden box.
- H.e. Ellis Co. 0- 1" .001" Depth Micrometer (Tl142) - H.E. ELLIS CO. 0-1" .001" DEPTH MICROMETER USA MADE (TL142).
- Starrett Inside Micrometer Set 124-B 124B Machinist Tool Maker in Box - Starrett 124b in the case,might be missing a piece or 2.
- Vintage Central Tool Micrometer Set of 3 - Vintage Central Tool Micrometer Set of 3. All in great condition
- 🇯🇵 Mitutoyo 103-225 10-11", 0.0001 Grad Ratchet Stop Outside Micrometer ⭐⭐⭐⭐⭐ - Made in Japan. Used but in working condition. Spindle, ratchet, and lock operate smoothly. Again, it is used but in decent condition and it's still accurate.
- Vintage LUFKIN NO. 611T 0-1" Thread Micrometer 14-20 TPI US & V STANDARD .001" - Used condition. Original owner etched numbers on it.
- 0-25mm METRIC MICROMETER SLIGHTLY USED - Unbranded 0-25mm METRIC MICROMETER SLIGHTLY USED in good condition with case.
- Vintage Lufkin Outside No 1641V Micrometer - Used condition.
- Mitutoyo No. 112-237 30° Point Micrometer 0-1” Carbide Made in Japan VGC 👀 - Greetings machinists,engineers and tool collectors !For your consideration is a Mitutoyo No. 112-237 30° carbide point micrometer with a 0-1” capacity.This tool was made in Japan and is in very good condition.There is a small spot on one of the shafts and a small black spot on the handle. ( pictured ) other than that it’s pretty clean. Please, look closely at the attached images as they are a part of the description and help provide a good idea as to the condition of this item.
- Browne & Sharpe # 281 Internal Bore Micrometer 0.800 - 1.000 Intrimik Trimike
- Mitutoyo 293-832-30 0-1" Digimatic Micrometer .0005" - MITUTOYO 293-832-30 0-1" DIGIMATIC MICROMETER .0005". Very clean great condition. Maintained in original case.
- Newport Ajs100-1 Style Micrometer 25.4 Mm - Older Knob - A signed credit card authorization form is required for all orders paid with credit card. ALWAYS HERE TO HELP. This unit will arrive in the condition shown. SKU: I556694. We directly accept US issued credit cards.
- Mitutoyo Outside Micrometer 0- 25 Mm Locking - 0.01 Mm ~ Style 103-129 103-137 - This unit does not have a model number listed on it, but looks like the 103-129 or 103-137 model. A signed credit card authorization form is required for all orders paid with credit card. ALWAYS HERE TO HELP.
- NSK OUTSIDE MICROMETER 25 - 50 MM Ratchet - 0.01 MM - This unit will arrive in the condition shown. A signed credit card authorization form is required for all orders paid with credit card. We directly accept US issued credit cards.
- Melles Griot 0.5" 1.3 Cm Adjustable Diameter Micrometer Blk - A signed credit card authorization form is required for all orders paid with credit card. We directly accept US issued credit cards.
- Vintage Fulton 0-1’’ Micrometer W/friction Stop Sold By Sears Roebuck Co. - Vintage Fulton 0-1’’ Micrometer W/friction Stop Sold By Sears Roebuck Co..
- Vintage Brown & Sharpe Micrometer No. 13 - Vintage Brown & Sharpe Micrometer No. 13. This is in Good condition
- Mitutoyo 156 series micro-meter stand MS-RB 156-101-10
- Mitutoyo 156 series micro-meter stand MS-RB 156-101-10 - Cast iron. Plug: TypeA. [ Electronics ].
- Mitutoyo 510-132 0-1" Indicating Micrometer .00005 Graduation
- Brown & Sharpe Micrometer # 11A. In Original Case. Providence R.i. Rhode Island - IN ORIGINAL CASE. SEE PHOTO'S. RULER OR CHART NOT INCLUDED ONLY TO SHOW SIZE OF ITEM. FOR OVERALL CONDITION.
- Brown & Sharpe 599-210-1 Thread Micrometer 210-1 0-1" - Brown and Sharpe thread mic. Great working condition. Comes with calibrating gage and all the tips in the pictures
- Starrett Outside Micrometer Set A No.224 - w/Wooden Case & Box NOS Vintage New - Starrett Outside Micrometer Set A No.224 - w/Wooden Case & Box NOS Vintage New. Dial spins good nice and tight
- Mitutoyo 0-1" .0001” Dial Indicator Tester Disc for Indicators Gages Calibration
- 3 Starrett Outside Calipers 436-1 436-2 No 2-c Made in USA - 3 Starrett Outside Calipers 436-1 436-2 No 2-c Made in USA. One has initials scratched in otherwise all in good shape
- Brown & Sharpe 608-- Depth Micrometer - Brown & Sharpe 608-- Depth Micrometer. There some black stain spots on metal base part. (Shown in pictures)The box also has some signs of dust inside the channels of the box (shown in pictures) however the the tool efficiency is NOT comprised.
- 3 VINTAGE LS STARRETT CO. ATHOL, MASS. USA SPE 707 213 MICROMETER HEAD Stainless - Selling 3 vintage L.S.STARRETT CO. ATHOL,MASS. USA micrometer heads of which the two larger are marked "SPE 707 213' on the butt end. Used but working normally; some darker areas where light rust was brushed off. Free shipping in the USA.
- Mitutoyo 510-133 Indicating Micrometer 2-3" .00005 Graduation
- Vintage Starrett caliper no. 436-1 1 inch 1" w/ case Machinist tool - Here is a nice piece for your collection. The micrometer is functional and does not have any marking or engravings (no engraved name no engraved initials). The box is worn given its age, but snaps open and shut just fine.
- Mitutoyo 510-134 Indicating Micrometer 3-4" .00005 Graduation
- Brown & Sharpe No.13 , 1" Micrometer in Wood Case, Machinists Tool
- Micrometer Dial 0-1mm , 1μm resolution USSR NEW (old stock) - I bought this instrument, new some 30 years ago and kept it unused in its box till now. It is in perfect and working condition as seen on the photos. For demonstration purposes , I have also put the instrument on a proper heavy duty base, which is Not Included and to be purchased separately!
- Starrett Micrometer 6in. Dial Caliper No. 120 Stainless Made In USA Red Case - Starrett Micrometer 6in. Dial Caliper No. 120 Stainless Made In USA Red Case.
- MITUTOYO 8-40" Inside Micrometer Set 141-122 IMS 40 Interchangeable Rods .001" - Shows signs of use with scuffs and scrapes. Has engravings from previous owner.see pictures.
- FOWLER 52-401-222 Outside Micrometer 6-12" Interchangeable W/ Standards .001 - 6-12" with Interchangeable anvils and Standards. Shows signs of use with scuffs and scratches. No rust or engravings.
- MITUTOYO 129-150 Depth Micrometer 0-12" Range .001" Grad 4" Base INCOMPLETE - Set is incomplete. MISSING 6-7" rod and 8-9" rod. Shows signs of use with light scuffs and scratches. Has engravings from previous owner. -. 001" Grad. - 0-12" Range.
- 52-253-004-1, Premium outside Inch Micrometer with 3-4" Measuring Range - The Vernier scale has 0.001" graduation intervals and ± 0.001″ accuracy for precise and accurate readings. We're happy to help.
- New 4-5" Precision outside Micrometer 0.0001" Carbide Tipped - 1 x Wrench. Weight: 2.07 lb.
- Brown & Sharpe 1-2 micrometer, .0001" - Brown & Sharpe 1-2 micrometer, .0001".
- Vtg Mitutoyo outside micrometer 1-2 no.103-262.grad.0001” - Vtg Mitutoyo outside micrometer 1-2 no.103-262.grad.0001”. Needs cleaning So.e rust Operates fine. Sb
- Can Seam Analog Micrometer 0-13 MITUTOYO / #D O1ME 5229 - Price for 1 piece! Important information!
- Vintage Rare Agla Micrometer Syringe Outfit Made In England Old Medical
- Disc micrometer for gears MMSw 75-100 / #D O1ME 4529 - Price for 1 piece! Want to buy more pieces?.
- Newport Rh-25 Rh-50 Riser Base Lot 1 Each 25 Mm & 50 Mm Sl Series Optical Mount - This lot is for oneLot Newport RH-25 and RH-50 Risers. ALWAYS HERE TO HELP. A signed credit card authorization form is required for all orders paid with credit card.
- Kafer Fd 50/C Digital Thickness Gauge & Lifting Device Range 10 Mm Depth 50 Mm - This lot is for oneKAFER FD 50/C Digital Thickness Gauge with lifting device. This unit will arrive in the condition shown, standard allen head screw installed on lift device for tightening. Depth of Jaw: 50 mm.
- Newport Bd17.04 Differential Micrometer 4.3 Mm Coarse 0.3 Mm Fine 11 Lb. Load - Axial Load Capacity 45 N. Fine Travel 0.30 mm. Travel Range 4.3 mm. Graduations, Fine 1 µm. This unit will arrive in the condition shown. ALWAYS HERE TO HELP. A signed credit card authorization form is required for all orders paid with credit card.
- Kafer F50 Thickness Gauge ~ Analog - This lot is for oneKAFER F50 THICKNESS GAUGE. A signed credit card authorization form is required for all orders paid with credit card. We directly accept US issued credit cards.
- Vintage Tumico Tubular Micrometer 0-1" In Box, FREE 2-3 Day Ship!!! - If any accessory is not listed or shown in pictures, it will NOT be included.
- Cessna Micrometer Vintage - Cessna Micrometer Vintage.
- Starrett No. 124-C 8-32" Inside Micrometer with Wooden Case - Starrett No. 124-C 8-32" Inside Micrometer with Wooden Case.
- Brown & Sharpe Intrimik Internal Micrometer Set, Range: 0.275" - 0.500" - Brown & Sharpe Intrimik Internal Micrometer Set, Range: 0.275" - 0.500". 3 piece set with calibration setting rings.
- Old Vintage Tumico Tubular Micrometer St. James Minn. U.S.A. - It is in good vintage condition. Please see photos for a better idea of condition. F
- STARRETT INSIDE MICROMETER SET NO 124A w/ WOOD CASE - 2-8 INCHES - STARRETT INSIDE MICROMETER SET NO 124A w/ WOOD CASE - 2-8 INCHES USEDThe set is missing the long reach handle.Please review the photos prior to bidding.
- Set of Brown and Sharpe Micrometers - 1 inch, 2 inch & 2-3 inch - Set of Brown and Sharpe Micrometers - 1 inch, 2 inch & 2-3 inch.
- Starrett No. 436-1 Micrometer Machinist Tool USA 0.0001 resolution - Starrett No. 436-1 Micrometer Machinist Tool USA 0.0001 resolution. In good used condition as shown. Smooth function, no issues.
- Starrett Computer Interface Adapter 61768 W/22938 CABLE--NEW
- Mitutoyo 0 to 3" Range, 3 Piece Mechanical Outside Micrometer Set 0.0001" Gra... - Mitutoyo No. 103-135 , 103-136 , 103-217 made in Japan
- Brown & Sharpe 1-2" Digit-Mike Plus Digital Micrometer - New - Brown & Sharpe 1-2" Digit-Mike Plus Digital Micrometer - New. Micrometer has never been used or opened and is in its original sealed hard plastic container.
- Brown & Sharpe 2-3" Digit-Mike Plus Digital Micrometer - New - Brown & Sharpe 2-3" Digit-Mike Plus Digital Micrometer - New. Micrometer has never been used or opened and is in its original sealed hard plastic container.
- Mitutoyo No. 2416 & No 7322 .001 - 1.000" Inspection Measuring Micrometer - MITUTOYO NO. 2416 & NO 7322 .001 - 1.000" INSPECTION MEASURING MICROMETER, UNTESTED, NO BOX.
- Mitutoyo 129-132 Depth Micrometer 0"-6" X .001", DMC4-6" - Mitutoyo 129-132 Depth Micrometer 0"-6" X .001", DMC4-6".
- mitutoyo digital micrometer 293-702 1-2" - Mitutoyo digital micrometer 293-702 1-2". Vintage wood grain plastic case slightly stained but in good condition. Comes with original Mitutoyo standard and Mic wrench. Mic Needs Battery.
- Craftsman 4090, 0-1in. Micrometer, Black Frame W/Ratchet & Locknut - Craftsman 4090, 0-1in. Micrometer, Black Frame W/Ratchet & Locknut. Owner engravings on both sides of the frame, as shown in picturesSee photos for detail.Happy to combine multiple purchases into a single shipment. I typically rebate EXCESS postage paid (deducting actual postage cost and shipping value fees assessed). For the best shipping price, please add items to your shopping cart and hit the “Request Total” from me before paying. (Available usually on Classic Web versions. May not be an option on all platforms).🇺🇸
- Tubular Micrometer Co 2-3" 14-20 THREAD MIC Tool USA
- STARRETT No. 124 Solid-Rod Inside Micrometer Set 2-8" Range .001" Grad USA - 2-8" Range with. 001" Grad. Shows signs of use with light scuffs and scratches. No rust or engravings. Works as it should.
- STARRETT NO. 436 3" MICROMETER 2"- 3” With 2" Measuring Rod & Spanner Wrench - The photos are to support our findings and opinions. Grading can be very subjective at best of us.
- Brown and sharp miceometer 0-1 - old
- Starrett No. 436FL 2" Micrometer 1"-2" .001" Measuring Rod & Spanner Wrench - The photos are to support our findings and opinions. Grading can be very subjective at best of us.
- Starrett No 436RL Outside Micrometer 0-1 Inch With Spanner Wrench - The photos are to support our findings and opinions. Grading can be very subjective at best of us.
- Mitutoyo 326-711-10 Screw Thread Micrometer 0-1" .00005”
- Mitutoyo 293-763-30 Digital Micrometer 2”-3” .00005
- NSK 100-125mm Micrometer Ratchet Stop YAN05-M Digital 550-505 Japan Fowler Tool
- Mitutoyo digital micrometer and caliper set
- Micrometer, 1 - 2" (.001) Micrometer, Carbide Faces, Spindle Lock, Ratchet - Spindle Lock.
- Micrometer, Starrett 1 - 2" Machinists Micrometer, Steel Faces, Pat. 12-10-1907 - Used by Machinists. Starrett Setting Ring is included. Pat'd Date of 12-10-1907. Steel Faces.
- Brown & Sharpe No. 1 Machinist's / Toolmaker's 0 - 1" Micrometer - Zero Setting Wrench included. to himself or other people resulting from the use, abuse or misuse of this item.
- Micrometer, Vintage J.T. Slocomb Co. 1 - 2" (.001) Machinist tool - Providence, R.I. U.S.A. Tool is in good used working condition.
- CLARKE Machinists 1 - 2" Micrometer (.001"), Carbide Faces, Ratchet Stop - For your Consideration is this CLARKE 1 - 2". Ratchet Stop. Spindle lock Knob is missing.
- Brown & Sharpe (No. 13) 0 - 1" Machinists Micrometer, .0001", Carbide Faces, USA - Made in USA.
- FOWLER 6 - 7" Machinists Micrometer, (.0001"), Spindle Lock, Ratchet Stop, Japan - Ratchet Stop. Spindle Lock. Made in Japan.
- Micrometer, New 0 - 25mm Machinist Micrometer
- STARRETT No.2 (1 - 2") Machinist's .001" Micrometer with Zero Setting Standard - Zero Setting Master Ring is included. Made in USA.
- Micrometer, 1 - 2" Steel Faces, Vintage J.T. Slocum Co., Prov., R.I., USA - "J.T. Slocum Co., Providence, R.I., U.S.A". Steel Faces.
- Micrometer, MILLERS FALLS 5 - 6" Micrometer .001" Steel Faces, Spindle Lock, USA - Steel Faces. himself or other people resulting from the use, abuse or misuse of this item.
- Machinist Micrometer, Bestool-Kanon, (.0001") 0 - 1" Range, Carbide Faces, Japan - Made in Japan. 0 - 1" Range.
- Micrometer, Craftsman 0 - 1" Machinist Micrometer (.001")Steel Faces Made in USA - Steel Faces. Made in USA. Tool is in good used working condition.
- M. G. Tool Co., 1 - 2" Machinist's Micrometer .001", Ratchet Stop, Spindle Lock - Ratchet Stop. Spindle Lock. Tool is in good used working condition.
- Vintage Mutitoyo Micrometer - No 103-260 - Japan - W/Case - Up for auction is a vintage Mitutoyo Micrometer - No 103-269 - Japan - W/Box. This is an estate sale find. Please review pictures regarding condition and additional information ( See condition description above ).
- Brown And Sharpe 0-1 Micrometer * Free Shipping - Brown And Sharpe 0-1 Micrometer * Free Shipping.
- L.S. Starrett Co. Anthol MA, 1-1000in Guage, As is - L.S. Starrett Co. Anthol MA, 1-1000in Guage. Small crack in the glass, as photos show.
- Starrett No. 436-1 Micrometer Machinist Tool USA 0.0001 resolution - Good condition with smooth operation. Does have initials RHJ inscribed. Please reference pictures.
- Starrett 443Z-3RL Depth Micrometer with a Half Base, 0-3" , .001" - HAS OWNERS MARKS.
- Accurate MITUTOYO 193-211 Analog Mechanical DIGITAL MICROMETER 0"-1" - Mitutoyo 193-211 Digit Outside Micrometer ,.0001", 0-1" Range.Measures accurately. No battery needed.
- Mitutoyo #121-132 0-2" Digital Bench Micrometer 50mm Metric & SAE Machinist #890 - Note: Missing two rubber feet. See pictures! This item is subject to prior sale.
- New. Starrett Protractor & Depth Gage, 6", Rectangular Head, C493B - Graduations at 8ths, 16ths, quick-reading 32nds, 64ths. 0-180 Deg, 6", Rectangular Head 64ths. Rectangular head. Both tools have a flat surface on the back of the head permitting laying the tool flat on paper or work.
- Starrett No. 575 Screw Thread Micrometer with Original Box and Manual - Starrett No. 575 Screw Thread Micrometer with Original Box and Manual.
- Mitutoyo 167-913 11 Piece 1"-11" Range Micrometer Calibration Standard Set - As shown in pictures
- 1960's era CRAFTSMAN Commercial SAE/Metric vernier caliper w/case & box MINT! - Up for your consideration is a Mint condition example of an Italian made Hardened, Stainless Steel vernier caliper. They are literally like in new unused condition. Including the sheath and original box.
- Vintage STARRETT - micrometer 0-1" & 1-2" Very nice! - Has spindle lock, ratchet thimble and reads to. 0001". Both do have previous owner I.D. markings on them. BOTH are in cases. The case covers show obvious wear and evidence of previously removed stickers.
- OD micrometers 10 - Used lot of 10 OD micrometers, all in great shape and all travel smooth. Will come with long form calibration certificates! We fully test and check all our gauges1 Any questions please feel free to ask!
- Mitutoyo No 103-135 (Pso027231) - MITUTOYO NO 103-135. Gold/Silver Jewelry, Diamonds, Coins, Firearms. Things I Buy.
- Mitutoyo 167-142 & 167-141 Micrometer Standard Bar lot 1" and 2" - Mitutoyo 167-142 & 167-141 Micrometer Standard Bar lot 1" and 2". GOOD USED CONDITION PLEASE VIEW ALL PICS THANK YOU
- Mahr FEDERAL 2 - 3" Micrometer 0,0001" Type 40A 3010014 - Mahr FEDERAL 2" - 3" Micrometer as shown including accessories. Has seen some use. 0,0001" 40A 3010014
- Lot Of 6 Micrometer Standards Spanner Wrenches Etc 5" 2" - Lot Of 6 Micrometer Standards and Spanner Wrenches Et5" and.2" micrometer standards.
- Mahr FEDERAL 2 - 3" Micrometer in Case 0.0001" 0011003 Type 40A 4134913
- Mitutoyo 103-190 Outside Micrometer, 13-14 in, .001", New - As shown in pictures. Note this is new, but does have owners marks on it as shown
- Brown & Sharpe 1-2 micrometer, .0001" - As shown in pictures
- STARRETT NO. 436 Outside MICROMETER 2"- 3” Machinist Tool With Owners Marks - STARRETT NO. 436 Outside MICROMETER 2"- 3” Machinist Tool With Owners Marks see pictures.
- 0 - 1" X .00005"/0.001mm IP65 Digimatic Outside Micrometer, No SPC Output, - 0 - 1" X .00005"/0.001mm IP65 Digimatic Outside Micrometer, No SPC Output,.
- Two Vintage Starrett No. 191 Jack Screw Set Original Boxes The L.S. Starrett Co. - Two Vintage Starrett No. 191 Jack Screw Set Original Boxes The L.S. Starrett Co. Please look at all pictures. No names or numbers on tool.
- Accusize Industrial Tools 0-1''/0-25 mm by 0.00005''/0.001 mm 7-Key Electroni... - Hold button, Tolerance Mode, Relative and Absolute Modes, and Pre-settable Origin. Resolution: 0.001mm or 0.00005". Battery used is button cell LR44 or SR44 (1.5V). Auto On and Off capabilities.
- Mitutoyo digital micrometer 293-230 MDC-25MJ Japan Used Very Good - About Importer's Obligation.
- Mitutoyo 293-350-30 Micrometer, Digimatic 4-5in, .00005in / 101.6-127mm, - What's included with the Mitutoyo 293-350-30. Mitutoyo 293-350-30 Specifications. Resolution. 0001" / 0.001mm. Local pick up is not available. Battery life Approx. 2.4 years under normal use. Battery SR44 (1 pc.).
- Mitutoyo 295-253 Spherical Face Micrometer, 0 to 1" (0 to 25.4 mm) - Digit counter. Range 0 to 1" (0 to 25.4 mm). Local pick up is not available. Remarks D: 40". Carrying Case.
- STARRETT 222AXR-1 Sheet Metal Micrometer,0-1,6 In Throat - STARRETT 222AXR-1. IP65 units are resistant to jet-directed and hose-directed fluids. Jurisdictions have varying laws, codes and regulations governing construction, installation, and/or use of products for a particular purpose.
- Mitutoyo 293-341-30 Coolant Proof IP65 Micrometer, 1-2" (25.4-50.8mm) - Coolant proof. Resolution (mm) 0.0010. Data Output No. Plastic Fitted Case. Local pick up is not available. Includes Plastic Case. Auto Power ON/OFF function. Order No: 293-341-30.
- Vintage Outside Micrometer Browne & Sharpe 11, 13, 294 Lufkin No. 1641 - Overall good condition with signs of age and wear.
- Mitutoyo Mitutoyo U-shaped steel plate micrometer 25-50mm Japanese - • Minimum display amount: 0.001mm. Note that. Arrived in about 2 weeks.
- MITUTOYO 122-103 BLADE Micrometer 50-75mm/0.01mm - Mitutoyo 122-103 Blade Micrometer 50-75mm/0.01mm. Mitutoyo Blade MicrometerThe anvil and the spindle have a blade for measuring the groove diameter of shafts, keyways, and other hard-to-reach portions.Specifications include...50-75mm Measuring Range0.01mm GraduationFeatures include...Ratchet Stop for constant forceBlade Dimensions...0.030" Wide0.236" Tall0.256" LongThere are engravings in multiple areas of the micrometer body as the pictures show.Please feel free to contact me for any additional information. Thank you for looking!
- MITUTOYO Mitutoyo Depth Gauge Micrometer 0-25mm 0.01mm Japanese - Mitutoyo depth gauge 0-25mm 0.01mm. Graduation (mm) 0.01. Note that. Arrived in about 2 weeks.
- Mitutoyo 293-230-30 Digimatic Micrometer 0-25 Mm Spc Output Japan MDC-25MX - Japan Usage Item.
- STARRETT No. 486M 25-50mm BLADE Micrometer - Starrett No. 486M Blade Micrometer. Range 25-50mmResolution 0.01mmBlade thickness at thinnest portion: 0.75mmThis blade micrometer has engravings in multiple locations, please see all pictures.Please reach out if you have any question.Thank you looking.
- INSIZE Micrometer Set - Lot of 14 - 11 inch through 2 Inch - Good used condition. Light wear.
- Vintage HDT Outside Micrometers Lot of 6
- Vintage Brown And Sharpe WOOD Box Joint Box ONLY 7 1/2” x 3 1/2” X 1 1/8” Empty
- Mitutoyo Coolant Proof Micrometer MDC-100 PX 293-243-30 From Japan - Minimum display: 0.001mm. Even if you think to yourself, "But the item I want is only available in Japan.". Asia, Middle East.
- MITUTOYO 103-137 Micrometer,0-25mm,0.01,RatchetFS
- Depth Micrometer 0.01 - 100mm USSR New !! - I bought this fine instrument new , some 30 years ago and kept it in its box unused till now.
- Precise 0-13mm Range Micrometer Head Measurement Measure Tool Flat Type - Note: The color of the item may vary slightly due to photography and your own computer Feature: Suitable For: Optical instrumentation platform displacement amount of the fine adjustment. For XY table suitable for fine adjustment of a variety of precision instruments, and measuring equipment. LCD production and testing equipment. The liquid crystal prism camera positioning and loading. An optical fiber positioning, optical communication system products and testing equipment. The semiconductor manufacturing equipment and inspection associated evaluation device..
- Vintage Brown & Sharpe #63A & #61 Micrometer Caliper Machinist Tools - Vintage Brown & Sharpe #63A & #61 Micrometer Caliper Machinist Tools. Both in good condition. Only what's on pictures included.
- Fowler 52-229-214 Outside Micrometer Set with 0–4" Range (Set of 4) New Open - Case may have a few minor scratches from sitting on the shelf but nothing major at all.
- Starrett 0-1'' Outside Micrometer #230 With Hard Case - Starrett 0-1'' Outside Micrometer #230 With Hard Case. Overall condition is good! The case does show use/wear. Everything on the meter works as it should.A32
- Vintage Lufkin 1-2" Micrometer - VINTAGE LUFKIN 1-2" MICROMETER.(B30-4)
- Beta LaserMike Controller Model 192 - Beta LaserMike Controller Model 192-15. This is being sold as a pre-owned item however the company I received it from does not believe it was ever put into the work environment. It also says the number of size readings since last put in run mode is Zero. Refer to the pictures for cosmetic quality and physical condition. Tested for power and key functions. This item will come with a power chord. Message us for any further assistance with your purchase.
- 0.5'' Digital Thickness Meter Electronic Micrometer 0.01mm LCD Handle&Box 12.7mm - LCD Display Touch Screen Digitizer Fit Huawei Honor 8 FRD-L04 L09 L14 L19 5.2". - Large, easy-to-read LCD. Fuel Gas Briggs & Stratton Cap Cover 692046 Compatible With 793606 699985 Black. - Real Range :0-12.7mm.
- Mitutoyo Outside Mechanical Micrometer #104-138~6-12" Range~0.001" Grads~EXC
- Mitutoyo Outside Metric Mechanical Micrometer #103-148B~275-300mm Range~New
- Micrometer Dispensing Precision QLH-21B Thimble Type Valve Screw Cap Interface - 1 x QLH-21B Dispensing Valve. Model Number: QLH-21B. Weight: 500g.
- Micrometer QLH-21B Dispensing Precision Thimble Type Valve Screw Cap Interface - 1 x QLH-21B Dispensing Valve. Model Number: QLH-21B. Weight: 500g.
- Mitutoyo 293-186-30 QuantuMike Digimatic Micrometer Replacement Screen Part - Tested and fully functional. Pulled from working units.
- Dasqua 7111-1105 Micrometer Stand - Lacquered cast iron base.
- Outside Boice 1" Snap Gage & Carbide Anvils Federal Gauge - Working Unit Iii - This lot is for oneOutside Boice Gauge - Working III. All pads are springy and the gauge reads well. This unit will arrive in the condition shown. A signed credit card authorization form is required for all orders paid with credit card.
- Brown & Sharpe 1" Micrometer 0.374" 3/8" Insert Head - This unit will arrive in the condition shown. ALWAYS HERE TO HELP. A signed credit card authorization form is required for all orders paid with credit card. We directly accept US issued credit cards.
- Starrett ST436.1AXRLZ Outside Micrometer set *READ - Starrett ST436.1AXRLZ Outside Micrometer set *READ. Practically OPEN BOX. Half of the items appear to have been used once, maybe twice. The rest are untouched. The wooden case is immaculate. Includes original box.Shipped with USPS Parcel Select.
- Procheck 1-2" micrometer
- STARRETT #436-7 6-7" Micrometer Carbide tips, .0001" NEW - Black wrinkle finish.
- Fowler DIGIT Disc Brake Micrometer - 0.3in to 1.3in
- 0-1", 1"-2" Mitutoyo Digital Micrometers Inspection Precision Machinist Tools
- Starrett 436RL-3 Outside Micrometer, 2-3" Range, .001"Graduation NOS! - Never used!
- Vintage NATIONAL Caliper Micrometer 0-1" Made In USA - Actual item in photos. Continental US only.
- Vintage 0"-1" Mitutoyo No. 103-260 Outside Micrometer in Wood Case. Army Issue - Official Army Issue. Vintage 0"-1" Mitutoyo No. 103-260 Outside Micrometer in Wood Case .0001". This is the Real deal micrometer. Enclosed Is a US Army official Calibration schedule. (5210-540-2973) Caliper-Micrometer-Outside. Missing tiny wrench
- Starrett 569 Tube Micrometer , 0-1" , .001" - HAS OWNERS MARKS
- Vintage Style Micrometer 0-1” VINTAGE .0001 - SOLD AS IS AS PICTURED MAY NEED SERVICE PARTS OR REPAIR IN THE FUTURE. PRE OWNED SHOWS SIGNS OF PREVIOUS USE HANDLING AND STORAGE INCLUDING SCRATCHES MARKS DUST AND NICS.
- MITUTOYO Mechanical Outside Micrometer: 0-25 mm Range, 0.01″ Graduation
- 0.01mm Thin Metal Micrometer Aluminum Automatical Durable 0-25.4mm/1in Digital - Material: Aluminum. Relative Humidity: Less Than or Equal to 80%. Feature: 1. With the switch key, you can choose to automatically cut off the power. Resolution: 0.01mm/0.001in.
- SHARS 0-1" Electronic Tube Micrometer .00005" / 0.001mm Graduation NEW P} - GRADUATION0.00005"/0.001mm. ACCURACY±0.000015"/0.003mm. Water, oil and coolant resistant to IP54. You may ask for freight cost before buying tools. Direct RS232 output. Product application.
- Mitutoyo 193-103 Digit Outside Micrometer Ratchet Stop 50-75mm Range 0.01mm - I am station in Tokyo,Japan. through all over the world.
- Vintage Starrett No. 436 Outside Micrometer 3" to 4" .001 - Used condition, as pictured. $8.40 for priority mail.
- Starrett 823BZ Tubular Inside Micrometer - Starrett 823BZ Tubular Inside Micrometer. Please see pictures for condition and close ups of components. I used a similar item to post so please verify the parts in the picture are what you are wanting to purchase. Feel free to message me if you would like more pictures or have any questions.
- Starrett PT07389 2" Gage for 124 Inside Micrometer IN STOCK - 1/2" Spacer FOR #124.
- Electronic Digital Dial Micrometer Thickness Gauge 0-1 In/25.4 mm Inch/Metric - LCD with electronic digital display, easy to read. Specifications: Material: Auminum Alloy.
- VINTAGE MACHINIST Tubular Micrometer 0-1" # 907 w/ Box - SOLD AS IS AS PICTURED MAY NEED SERVICE PARTS OR REPAIR IN THE FUTURE. PRE OWNED SHOWS SIGNS OF PREVIOUS USE HANDLING AND STORAGE INCLUDING SCRATCHES MARKS DUST AND NICS.
- SPI MICROMETER 1-2" .0001" 10-6021-1 Carbide Anvils Great Condition - SOLD AS IS AS PICTURED MAY NEED SERVICE PARTS OR REPAIR IN THE FUTURE.
- STARRETT NO.436 Outside MICROMETER 2"- 3” Machinist Tool (Friction Thimble) USA - Very minor rust stains on Thimble (See Pictures). Tool has been gone through cleaned and oiled and set with standard.
- Quality M1K Electronic Micrometer Head - Model: M1K. Manufacturer Part Number: M1K. We have over 10 years combined experience in Industrial Surplus. We love to hear from you. Serial Numbers must be verified.
- Mitutoyo Micrometer Standard 22" 167-162 - Manufacturer: Mitutoyo. Serial Numbers must be verified.
- Mitutoyo 23 Inch Micrometer 167 163 In STANDARD BAR - I’M IN THIS FOR THE LONG HAUL.
- Mitutoyo 21 Inch Micrometer 167 161 In - I’M IN THIS FOR THE LONG HAUL.
- Starrett No. 436 FT Outside Micrometer 1"-2" Inch Range, .001" Grads No. 436 - What you see in pictures is what you will be purchasing unless noted. Anvils look good.
- Vintage LUFKIN MICROMETER Depth Gage Set No. 513N w/ Case - Overall good condition with signs of normal use. Please inspect all pictures.
- 52-517-612-1 Fowler Deep Throat Micrometer 1" Range, 12" Deep, Ball Anvil - Ball Anvil. The spindle thread is hardened, ground and lapped. 12" Throat Depth. 0.0001" Graduations. All models feature a ratchet stop thimble for exact and repetitive readings.
- Vintage Lufkin 680B Inside Micrometer Set with Case, 1-1/2" to 12" - Overall good condition with signs of normal use. Some of the pieces have engraving on them.
- Vintage LS Starrett No. 226 Outside Micrometer 1-2" Range - Ratchet Stop Clean - Vintage LS Starrett No. 226 Outside Micrometer 1-2" Range - Ratchet Stop Clean. Tool has been gone through cleaned and oiled and set with standard. Tool is ready to go for your measuring needs. Tool does have ID markings on the frame. Standard not included with item These are vintage items so please examine pictures for complete item condition, type, and quantities. What you see in pictures is what you will be purchasing unless noted. Thanks again for looking.
- 54-880-002-0 Fowler Electronic Micrometer 1-2" - Included is a Corrosive Resistant Ratchet Thimble (Anodized Aluminum). 0.00005" / 0.001mm Resolution. 0.00016" / 0.004mm Accuracy. IP54 Rated Protection.
- 54-880-003-0 Fowler Electronic Micrometer 2-3" - Included is a Corrosive Resistant Ratchet Thimble (Anodized Aluminum). 0.00005" / 0.001mm Resolution. 0.0002" / 0.005mm Accuracy. IP54 Rated Protection.
- SPI Mechanical Groove Micrometer 0.06-1.05″ Inside, 0-1″ Outside 20-936-1 - May 19 2023. Standards NIST Traceability Certification. Features Non-Rotating Spindle.
- Mitutoyo Micrometer 2-3 " .0001” Code No. 103-115 Made In Brazil
- Vintage MITUTOYO Outside Micrometer 3-4" Range .0001" No.103-218 MACHINIST TOOL
- Vintage Mitutoyo 103-219 Outside Micrometer 4-5"-.0001"Brasil-Wood Storage Box - Sil-Wood Storage Box.
- Mitutoyo Coolant Proof Micrometer MDC-100PX 293-243-30 - Has SPC data output. All my products are 100% Authentic ! Most products are Japanese products and the manuals are in Japanese.
- Mitutoyo Outer Micrometer M110-50 103-138 - All my products are 100% Authentic !
- Mitutoyo Mt810139 Metric Back Plate Agd-2 - MITUTOYO MT810139 METRIC BACKFLAP AGD-2
- Asimeto 7601667 0-6" X.0001" Grad 6 Pc Outside Micrometer Set
- Vintage Starrett Micrometer Caliper - STARRETT CALIPER.
- Vintage Starrett Micrometer Original Wood Box Only Box no tools ATHOL MASS - Selling a very old wood box . Measures 5.5" by 2.75" by 1.25". Starrett Micrometer box. The L.S. Starrett Co.. Athol, Mass U.S.A. Box is empty. Dove tailed edges.
- Tobin Arp tool setting micrometer for 1-1/2" bar
- 2-Vintage Craftsman Outside Micrometers 0-1" & 2-3" .001 Made In Usa (Tl145) - 2-VINTAGE CRAFTSMAN OUTSIDE MICROMETERS 0-1" & 2-3" .001" MADE IN USA (TL145).
- Ls Starrett Co. #436 1-2" .001" Outside Micrometer Arhol, Mass. Usa (Tl141). - LS STARRETT CO. #436 1-2" .001" OUTSIDE MICROMETER ATHOL, MASS. USA (TL141).
- Brown & Sharp 0-1".001" Outside Micrometer Made In Usa (Tl140) - BROWN & SHARP 0-1" .001" OUTSIDE MICROMETER PROVIDENCE, R.I. USA (TL140).
- Starrett No. 436 Outside Micrometer 8-9" Range .001" - Offering a Starrett No. 436 Outside Micrometer 8-9" Range .001". Nice Used Condition with normal signs of use and wear. See photos for more details on what is included in this listing and its Condition.(ABBS3) Starrett No. 436 Outside Micrometer 8-9" Range Increments: .001"
- Mitutoyo 2 To 3” .0001 Graduation Mechanical Indicating Micrometer - Mitutoyo 2 To 3” .0001 Graduation Mechanical Indicating Micrometer. Used but in Excellent condition! In Original box 2-3” range, dial reads in .00005” graduation.Thimble reads in .0001 graduationIncluded are calibration wrench and gage as well as all factory paperwork & instructions
- Mitutoyo 2 To 3” .0001 Graduation Mechanical Indicating Micrometer - Mitutoyo 2 To 3” .0001 Graduation Mechanical Indicating Micrometer. Used but in Excellent condition! In Original box 2-3” range, dial reads in .00005” graduation.Thimble reads in .0001 graduationIncluded are calibration wrench and gage
- Machinist Vintage Central Tool Co Company 2-3" Outside Micrometer Cranston USA - Machinist Vintage Central Tool Co Company 2-3" Outside Micrometer Cranston USA.
- INSIZE 3206-16 Outside Micrometer,Ratchet Thimble - INSIZE 3206-16. Grainger reserves the right to accept or reject any order. administered by BIS, and the International Traffic in Arms Regulations administered by DDTC. Diversion contrary to U.S. law is prohibited.
- Mitutoyo 0-1" Micrometer No510-202
- Starrett #124-B, 2"- 12" Depth Micrometer Set in wooden box - Missing the wrench.
- TOOLMEX Micrometer Set with Wood Case - TOOLMEX Micrometer Set with Wood Case. Small micrometer is seized and will not work. The other 2 seem to work good.
- Pratt & Whitney Model B External Supermicrometer Measuring Machine, .00002" PJ12 - It will have backlash.
- Starrett 261L Mechanical Micrometer Head,0 To 1/2" - Milwaukee Tool 48-73-8950 High Visibility Cut Level 5 Polyurethane Dipped. General Purpose. Zoro Select 4Nta9 Tubing,0.87 In. Od,Aluminum. Apollo Valves 36Lf50601 Water Pressure Reducing Valve,1-1/4 In.
- Vintage TESA TesaMaster 0-1" Micrometer Brevete Swiss Made - Vintage TESA TesaMaster 0-1" Micrometer Brevete Swiss Made.
- Mitutoyo 293-233-30 Coolant Proof Digimatic Micrometer MDC-100MX 75-100mm Used - The operation has been checked.
- Mitutoyo Digital Micrometer 25-50mm Japan
- Mitutoyo micrometer head (standard type) (MHS2-13L) 148-120 Japan
- SCHERR-TUMICO 0-1" Micrometer, Vintage
- Caliper With Pencil Holder Stainless Steel Calliper 6 Inch - VERY RIGID CONSTRUCTION. WE CAN MARK BY PENCIL AND STEEL TIP BOTH. 6" WING DIVIDERS / CALIPERS WITH HOLDER.
- Mitutoyo 137-214 Tubular Vernier Insider Micrometer 2"-40" Size #Made In Japan
- MITUTOYO Outside Micrometer 0-25mm Range 0.01mm 103-140 MINT Japan #236 - Pre-Owned.
- Starrett #1230 STAINLESS 0” to 1” Micrometer in Case In Box - Starrett #1230 STAINLESS 0” to 1” Micrometer in Case In Box. Excellent used condition. Free shipping.
- Vintage Craftsman Outside Micrometer Set 0-4" With Wooden Hinged Case Lathe Mill - They all seem to turn freely, that is all I know about them. Some have more black paint off than others, please see photos. They are being sold as-is. F
- Starrett T436.1RL-5 Outside Micrometer, 4-5" Range, .0001" Graduation - Graduation.0001". Range: 4-5". This item is professionally inspected and verified by our. With ratchet stop.
- Premium Outside Micrometer Set 0-4" / 0.0001" 0-1"/1-2"/2-3"/3-4" Precision M... - A Versatile & Useful Hand Tool for Any Professional Machinist or Hobbyist! Why Wait!?. At SANDOR Tool we only use the highest quality materials in our products, and we go the extra mile to stand by our tools.
- BROWN & SHARPE NO.287 INSIDE MICROMETER HANDLE - CLEAN With Original Box - BROWN & SHARPE NO.287 INSIDE MICROMETER HANDLE - CLEAN With Original Box.
- Mitutoyo digital micrometer model number MDC-1" PXT - Mitutoyo digital micrometer model number MDC-1" PXT.
- Mitutoyo Micrometer Standard 7" 167-147 - The product image is the actual item you will receive including all contents unless otherwise noted. We will take care of you! We are not an authorized dealer of this product. This product has no manufacturers warranty.
- MITUTOYO Mitutoyo Mitutoyo IDC-1012M Digimatic indicator Japanese - Mitutoyo Mitutoyo IDC-1012M Digimatic indicator. Mitutoyo Digimatic indicator. Note that. Arrived in about 2 weeks.
- New Mitutoyo 193-211 Digit Outside Micrometer Ratchet Stop 0-1" Range NOS - New Mitutoyo 193-211 Digit Outside Micrometer Ratchet Stop 0-1" Range.
- Starrett 5-6'' No 436 Outside Micrometer Friction Thimble 436-6 - Starrett No. 436.
- Starrett T436.1RL-3 Outside Micrometer, 2-3" Range, .0001" Graduation - Graduation.0001". Range: 2-3". This item is professionally inspected and verified by our. With ratchet stop.
- Brown & Sharpe 0-6” Depth Micrometer Depth Gage W/ Wood Case & 6 Rods EXCELLENT! - Brown & Sharpe 0-6” Depth Micrometer Depth Gage W/ Wood Case & 6 Rods EXCELLENT!Offered is a very nice Brown & Sharpe depth micrometer set - 6 rods 0-6”. This set looks like it hasn’t even been used. I listed it as “used” just because I can’t be certain. However, it looks unused. It is in excellent condition - very clean, rust free & no wear. Measurements in photos. Comes in a very nice wooden case. No owner engravings. Really nice example. It will make a great addition for someone. Please see photos as they are a part of the description. If you have any questions just ask. Thank you for looking!
- Starrett T436.1RL-4 Outside Micrometer, 3-4" Range, .0001" Graduation - Graduation.0001". Range: 3-4". This item is professionally inspected and verified by our. With ratchet stop.
- Starrett T436.1XRL-2 1"- 2".0001" Outside Micrometer - Starrett T436.1XRL-2 1"- 2".0001" Outside Micrometer. New in box carbide tips and .0001ths look at my other auction for new tools.
- Mitutoyo 103-222 Outside Micrometer, 7-8" Range, .0001" Graduation - Mitutoyo 103-222 Outside Micrometer, 7-8" Range, .0001" Graduation brand new unused.
- Starrett Mul-T-Anvil Micrometer 0-1" #220 Machinist Tool - Nice Used Condition Starrett Mul-T-Anvil Micrometer 0-1" #220 Machinist Tool. Will be shipped USPS first class package
- Mitutoyo #103-223, 8-9 in, Outside Micrometer, 0.0001 Accuracy - Mitutoyo #103-223, 8-9 in, Outside Micrometer, 0.0001 Accuracy. Brand new unused.
- STARRETT T436.1XRL-3 Outside Micrometer, Carbide Anvil-Spindle, 2-3" .0001ths - STARRETT T436.1XRL-3 Outside Micrometer, Carbide Anvil-Spindle, 2-3" .0001ths.
- Vintage Starrett 124 Solid Rod Micrometer Set With Wooden Box - Incomplete - Appears to be in good used condition, but is missing a rod.
- Starrett No.220 Anvil 0-1 Inch Outside Micrometer - Starrett No.220 Anvil 0-1 Inch Outside Micrometer.
- Vintage SCHERR - TUMICO, INC - Outside Micrometer / 1" - 2" / Made in USA - Vintage Scherr - Tumico Inc. - Outside Micrometer / 1"- 2" Made in USA There is wear to the finish, scuffs and scratches from years of use. It also has some surface rust. The knob turns fine. It will need a cleaning. It measures approx 6" long X 2 1/2" deep (wide, tall?) Thanks
- Mitutoyo 293-340-30 Digimatic Micrometer, 0-1" Coolant Range, .00005"/0.001mm - Mitutoyo 293-340-30 Digimatic Micrometer, 0-1" Coolant Range, .00005"/0.001mm.
- Vintage STARRETT No. 436 Outside Micrometer / 1"- 2" Made in USA - Vintage STARRETT No. 436 Outside Micrometer / 1"- 2" Made in USA There is wear to the paint, scuffs and scratches from years of use. It also has some surface rust. The knob turns fine. It will need a cleaning. It measures approx 6 1/4l2" long X 3" deep (wide, tall?) Thanks
- Vintage STARRETT No. 436 Outside Micrometer / 2"- 3" Made in USA - Vintage STARRETT No. 436 Outside Micrometer / 2"- 3" Made in USA There is wear to the paint, scuffs and scratches from years of use. It also has some surface rust. The knob turns fine, but gets a little stiff near the end. It will need a cleaning. It measures approx 7 1/4" long X 3 1/2" deep (wide, tall?) Thanks
- 18 Assorted Micrometer Spanner Wrenches - 18 assorted micrometer spanner wrenches, fit Starrett, Mitutoyo, Brown & Sharpe and one for a intrimik.
- Mitutoyo 293-346-30 Digimatic Micrometer, 2-3"/50-76mm Range, .00005"/0.001mm - MITUTOYO 293-346-30. Features zero set and LCD display.
- Scherr-Tumico 6-9” Caliper Micrometer Gauge in Wood Case w/ Inspection Cert. - Sealed in wrap. I respond promptly. - Beautiful vase.
- Starrett No. 2 Outside Micrometer 1" to 2" Lock Friction Case Standard Wrench - Good used condition, as pictured. As you can see in the photos this is engraved. $8.40 for priority mail.
- NSK 711-407 TS07-1 Depth Micrometer 0 to 4" .001" Original Box Japan Machinist - See all pictures.
- RARE OMEGA VINTAGE POCKET CALIPER - Hard to find, made in Spain. - RARE COLLECTIBLE and USEFUL object.
- SCHERR TUMICO Thickness micrometer - SCHERR TUMICO Thickness micrometer. Used and sold AS-IS.
- Mitutoyo Micrometer 101-229 - Mitutoyo Micrometer 101-229. The spots you see in the picture is surface rust. I buffed it the best I could with a Dremel tool. That is why the prices so low. Still works as it should.
- Vintage Miutoyo 0-1, .0001 Micrometer No. 193-211 Japan - (sEE ALL 3 PICTURES).
- Starrett 4 Piece Set Of No. 436 2 - 6" Outside Micrometer - The lot includes 436 (2”: 3”, & 4”). The smallest one (1” - 2”) does not have a ratcheting handle but operates smoothly through its range. The others (2” - 3” & 3”- 4”) also adjust as expected with ratcheting handles.
- Starrett No 436 8-9” Micrometer - Used condition. Original owners initials are etched in.
- SPI 0.50"-0.65" Inside Micrometer
- SPI 0.8"-1.0" Inside Micrometer - SPI 0.8"-1.0" Inside Micrometer
- New Old Stock Starrett Micrometer Head, 2" Range I5-2 - If it is in the picture, it is included. If it is not in the pictures, it is not included.
- Spi Micrometer Stand
- Vintage Helios Micrometer Caliper, Machinist Tool Germany - In used condition. 571B engraved on the back. See photos.
- Tubular Micrometer Co. 0-1" Micrometer
- 30-36 inch Tumico Micrometer Set, used, in wood case. - 30-36 inch Tumico micrometer set in wood case. Can ship freight if required, or free local pickup. Size and construction of the case, would rather not ship ground.
- Mitutoyo 129-112 129 Series Metric Depth Micrometer with Interchangeable Rods, - Rod T