Broncolor Move 1200L 2 Head Kit with Bag, Soft Boxes and stands.

• Gently used by one owner. 
• 1 x Move 1200 L Battery-Powered Pack
• 2 x MobiLED Flash Heads
• 1 x Continuous Light Adapter
• 1 x Weatherproof Power Pack Soft Case
• 1 x Outdoor Trolley Backpack
• 1 x  1x4' Softbox 
• 1x 4x6' (120x180 cm) Softbox 
• High Speed Sync Cable
• Recycling Speed Mode: 0.02 - 0.9 Sec
• 2 Outlets, 9-Stop Asymmetrical Control   3x Stands

The  Move Outdoor 2-Head Kit 2   from was put together by  Broncolor   for photographers who need to take a highly portable, battery-powered system with fast recycling, short flash durations and 9-stop power control on the road. The kit includes a 1200Ws Move 1200 L Battery-Powered Pack, 2 MobiLED Flash Heads, a Continuous Light Adapter, Weatherproof Pack Case, and an Outdoor Trolley Backpack. A 2 x 2' soft box and a 33.5" umbrella are also included.

The Move 1200 L power packs are compatible with Broncolor HS via firmware version 48.07 or later. Broncolor HS, when combined with an optional RFS2.2 transmitter, enables the Move 1200 L to sync at shutter speeds up to 1/8,000s on Canon, Nikon, and Sony camera systems with a flash head on Channel 1. For existing move 1200 L owners, firmware updates are available via an Authorized Broncolor Service Center.

• Move 1200 L Battery Power Pack with Lithium Battery and Charger

  The  Broncolor Move 1200 L Battery Power Pack with Lithium Battery and Charger  continues to raise the bar that Broncolor itself has set so high as an industry leader. The familiar blue handle and modern design are about all that has remained from previous incarnations. Two outlets distribute 1,200Ws of flash power either symmetrically or asymmetrically over 9.0 full stops and is variable in either 1/10 stop or 1 stop increments. It gets it there fast too, in every photographic sense of the word. Recycling time is a super-fast 0.02 to 0.9 sec (min/max) with action-stopping flash durations of 1/1000 / 1/350 sec (t0.5 /t0.1) at full power and as short as 1/20,000 / 1/8500 at minimum power. That means fleeting gestures and water droplets among other subjects frozen in mid air if desired. It's great for sports and dance in the field as well.

  Speaking of the field, the Move is aptly named. At only 13.7 lb it's lighter than its predecessor and uses an Li-FePo4 Lithium battery that gives you up to 230 full power flashes at full power and up to 50,000 pops at minimum power. You can even run the modeling light on your selected head for up to 2.0 hours thanks to the inclusion of a Continuous Light Adapter. You won't wear out this battery anytime soon either: it's rated for 4000 recharge cycles.

  The Move 1200L power packs are compatible with Broncolor HS via firmware version 48.07 or later. Broncolor HS, when combined with an optional RFS2.2 transmitter, enables the Move 1200L to sync at shutter speeds up to 1/8000s on Canon, Nikon, and Sony camera systems with a flash head on Channel 1. For existing move 1200L owners, firmware updates are available via an Authorized Broncolor Service Center.

  Granted the Move is a great performer, but in the end it's what you see that count's isn't it? The Move clocks in at an ideal 5500K color temperature, maintained by proprietary Enhanced Color Temperature Control technology. With quality like this, tripping over sync cords is just not an option; The Move 1200 L's triggering options include optical, IR and radio slaves built into the unit. The Move has a radio range of at least 164' and depending on the circumstances, a possible 984'. The Move 1200 L comes with the pack, battery and charger.

  Power Pack  Panel Display 

  Fully illuminated LCD and LED control panel and display

  Illuminated silicone keyboard, resistant to dust and scratches Power Distribution  Symmetrical or Asymmetrical, over two head outletsSmart Battery Conservation 

  Easy to plug in, battery charges within the unit

  Automatic switch-off of the power pack after a selectable delay time

  Select the Eco charging method to increase the number of flashes of each charge

  MobiLED Lamphead

  Made to match up with the A2L power pack, the  Broncolor MobiLED Flash Head   has a 1,600W/s rating and a unique 30W LED modeling lamp which outputs the equivalent of 100W of tungsten light but at a perfect 5,500K. The head features temperature activated fan cooling to increase the life of the flash tube and modeling light.

  By purchasing the optional Continuous Light Adapter, multi-tasking photographers can take advantage of the A2L's Continuous Video Light Mode to use the modeling light on its own for video productions. The head's innovative design allows you to reverse its protective cap and use it as an umbrella reflector. A built in Broncolor bayonet mount enables use of the comprehensive array of Broncolor light shapers and accessories. The MobiLED is compatible with both the A2L and A2R with the modeling light and all orher Bron packs without the LED modeling light functioning.

  MobiLED Lamphead  LED Modeling Light, Innovative Design  The head's 30W LED modeling light corresponds approximately to a 100W halogen lamp and is unique on the market in this form. The LED technology promises a longer service life as well as energy conservation for mobile applications. Also the color temperature of 5,500 K (daylight) opens up completely new horizons for the production of video sequences.Optional Continuous Light Adapter  With the combination of MobiLED lamp, Mobil A2L charger, and the optional continuous light adapter, it is possible to use the modeling light independently of the power pack. Just the solution to fulfill the increased demands of the customers.Additional Features 

  Corresponding output characteristics of flash tube and modeling light

  Equipped with 1,600W/s flash tube - plug-in flash tube and protecting glass (with mechanical safety device)

  Protective cap can be used as standard and umbrella reflector

  Quick release bracket

  Automatic locking mechanism of the light shaper (rotatable 360°)

  Integrated pan/tilt head with locking lever for one-hand operation

  Integrated umbrella holder

  Cooling fan and thermal protection

  MobiLED works on all other power packs than Mobil A2R/A2L (without modeling light)

  MobiLed Continuous Light Adapter (CLA)

  Great for video-capable DSLRs, the  Broncolor MobiLed Continuous Light Adapter (CLA)   allows the MobiLed's 30W (100W tungsten equivalent) LED modeling lamp to be used as a continuous 5500K light source independently of the A2L or A2r power pack. Just plug the adapter into the head's outlet cable then into the A2's charger and plug the charger into an AC source.

  Outdoor Trolley Backpack

  The  Outdoor Trolley Backpack  from  Broncolor  is specifically designed to carry all camera equipment and accessories.

  Broncolor   Softbox 30 x 120 cm (11.8 x 47.2") 

  This  Broncolor Softbox   is a 30 x 120 cm (11.8 x 47.2") light modifier that creates an even, diffuse light. This type of soft light is useful in product and portrait photography. The amount of diffusion can be adjusted via a removable baffle and front panel. Also, it is able to accept grids and other light modification accessories. 

  Included with this softbox are 4 rods for constructing and attaching the box to a light via an optional speedring. Also, it comes with the interior baffle, a front diffuser panel, and a transport bag for storage.

  Broncolor   Softbox 120 x 180 cm (47.2 x 70.8")

  This  Broncolor Softbox   is a 120 x 180 cm (47.2 x 70.8") light modifier that creates an even, diffuse light. This type of soft light is useful in product and portrait photography. The amount of diffusion can be adjusted via a removable baffle and front panel. Also, it is able to accept grids and other light modification accessories. 

  Included with this softbox are 4 rods for constructing and attaching the box to a light via an optional speedring. Also, it comes with the interior baffle, a front diffuser panel, and a transport bag for storage.