Seller:wiindustrialresale✉️(1,197)100%,
Location:Sun Prairie, Wisconsin, US,
Ships to: US,
Item:324755830712BriskHeat DHCX131000T3 Strip Heater, 30 Gallon - 120V - T3 Enviroment 42B. Brisk Heat part number DHCX131000T3. One set-point is set at a hightemperature limit and connected to a red indicator light. Silicone rubber density of 26 oz/yd2 (736 grams/m2) per layer. 392°F (200°C) maximum exposure temperature on heating surface. Brisk Heat EXPLOSTION-PROOF (T3) FM approved Drum Heater and Temperature control for 30 GALLON Drums, 1000 watts, 120 VOLTS AC, Metal vessel Diameter 18.6 inches, Length 58.5 inches, Width 8 inches Heating element is laminated between TWO layers of 23 mil and twolayers of 25 mil fiberglass reinforced silicone rubber Silicone rubber density of 26 oz/yd2 (736 grams/m2) per layer Patented grounded heating element Dielectric strength of over 2000 volts Attached adjustable dual set-point NEMA 7 temperature controllerwith power cord 6 feet (1.8m) long. One set-point is set at a hightemperature limit and connected to a red indicator light 392°F (200°C) maximum exposure temperature on heating surface Moisture and chemical resistant Blanket leads 6 feet (1.8m) long for NEMA7 controller The spring closure can be expanded 3" (76mm),p>FM Approved for Class I Division 2 Groups A*, B, C, and DClass II Division 2, Groups F and G Brisk Heat part number DHCX131000T3
Condition:New – Open box
Condition:Surplus from a plant closure. Does not appear to be used. See Pictures!!