Assembled Stainless Recoil Assembly, Guide Rod, 9mm Taurus G2C, G2S & PT111 G2

$28.95 Buy It Now 10d 8h, $3.49 Shipping, 30-Day Returns, eBay Money Back Guarantee

Seller: lakelinellc (1,553) 100%, Location: Chelan, Washington, Ships to: US, Item: 182525367131 Normal 0 false false false EN-US X-NONE X-NONE Recoil Assembly and Replacement Spring Set for the 9mm Taurus G2C, G2S and PT111-G2 pistol that includes:Fully Assembled Recoil Assembly Purchase the last recoil assembly your Taurus G2 pistol will ever need!! These are not one time, throw-away, parts that have to be replaced when the springs wear out. Fully assembled, just field strip your pistol, lubricate and install. Lakeline Stainless Steel Guide rods have a reputation for being tough, really tough! With thousands in use, these recoil assemblies have been proven for tens of thousands of rounds. There is simply no more reliable recoil assembly for the Taurus G2 pistols. No plastic, or thin drawn parts! The recoil rod is a single piece of stainless steel with the flange, the most highly stressed part, machined as one piece with the Guide Rod. Compare that to the factory part with a plastic guide rod with a steel screw acting as the flange threaded into plastic for the most highly stressed part of the assembly. The recoil sleeve is machined from another piece of stainless steel and it is stronger and harder than the factory drawn steel part. It is not a thin, drawn part like others. Its flange will not break off, allowing the outer spring to jump off and jam the action of your pistol. Our guide rod is engineered so the highly stressed end, the end that contacts the barrel, is a solid piece of stainless steel. Finally, our Machined Stainless Steel End Screw finishes the assembly and provides a custom look that fits in perfectly with stainless barrel on your Taurus G2. Unlike the factory and those that emulate the factory part, the screw is on the muzzle end and is under no stress when the pistol is assembled, as is best practice. Pistols with barrels in the 3 inch range are hard on recoil springs. When your recoil springs wear out, replacement spring sets are readily available for your recoil assembly. The springs are made from the best spring wire available and carefully finished to make sure that they will not over ride themselves or the flanges they ride on. Careful testing and optimization was done for the G2. You don't have to select a light spring, that doesn't tolerate heavy loads, nor a heavy spring, that may not cycle regular range ammo with the Lakeline recoil assembly. By optimizing the spring rates, choosing spring material that doesn't weaken under use as much as typical and using better spring and sleeve lengths, this recoil assembly provides lighter recoil with range ammo all the way to +P rounds. Replacing spring sets on a Lakeline LLC recoil assembly is easy. Reversing where the threaded end of the guide rod is from the factory and other guide rods makes assembly and spring changes simple. It also makes the guide rod solid stainless steel where the stress is highest while having the screw end with no load on it after installation. That approach makes the recoil assembly maintainable and keeps it from being a throwaway when the recoil springs eventually wear out. Sold in the Continental U.S., Alaska and Hawaii only. Condition: New, For Gun Make: Taurus, Model: T-PTG2-RA-STNLS, Modified Item: No, Country/Region of Manufacture: United States, Custom Bundle: No, Specific Part: T-PTG2-RA-STNLS, Type: Recoil Parts, Material/Finish: Stainless Steel, MPN: T-PTG2-RA-STNLS, For Gun Model: PT111 G2, G2C, Brand: Lakeline LLC, Non-Domestic Product: No

PicClick Insights PicClick Exclusive
  •  Popularity - 34,083 views, 50.1 views per day, 680 days on eBay. Super high amount of views. 1,378 sold, 331 available.
  •  Price -
  •  Seller - 1,553+ items sold. 0% negative feedback. Top-Rated Seller! Ships on time with tracking, 0 problems with past sales.
Similar Items