Location:Huntington Beach Ca.,
Ships to: US,
Item:251876808280Hose Assembly: AN -03 30" Long Stainless Steel Braid Teflon? (PTFE) Hose. -03 straight swivel nut By straight banjo for 7/16" banjo bolt. Nut and banjo chrome. Clear extruded PVC cover. End #1 AN -03 straight (3/8-24) thread, female swivel nut. 37ø Concave seat. End #2 Straight banjo for 7/16" banjo bolt. Assembly is measured from the outer edge of each hose end, ie, full length of assembly with a tolerance of -0.0 + 0.50 These hose assemblies Are used for brake lines, nitrous, pressure gauge lines, fuel, oil, air. Stainless Steel Braided PTFE (Teflon?) Hose is unaffected by almost every chemical. It is non aging and has a temperature rating of -65ø F To +450ø F continuous. -3 hose has a working pressure of 3,000 psi and a burst pressure of 12,000 psi. the minimum bend radius is 2 inches. I.D. is .125 O.D. is .250. meets or exceeds 100R14 Spec. Adding a -03 chrome banjo adapter to this order turns this hose assembly into a double banjo hose assembly needed in many applications. Using a banjo adapter allows the hose to be installed an easier and simpler process, as it can tightened down at the best angle. Banjo adapters come in 3/8", 10mm, 7/16", and 12mm hole size. and in Straight, 30ø and 90ø elbow bends. Many applications have different size banjo bolts on each end and this allows resolution of that problem. If you have any questions with regard to these hose assemblies and there application please call us at 714-969-0775 Cover Material: Polyvinyl Chloride (PVC) extruded over stainless steel braid. - Good abrasion resistance - Sensitive to UV - Limited thermal capability. End Material: Chrome nut and banjo. Permanent ends.Condition:New, Manufacturer Part Number:AT2-0021-03-030CR, Part Brand:GRAYSTONE
PicClick Insights for "
AN-3 30" long, stainless steel braid hose, ST X ST banjo 7/16" CC